Current Ingram Catalog - Hardcopy Version

Current Ingram Catalog - Hardcopy Version
INGRAM
P R O D U C T S, I N C.
Visual Alarms
Audible Alarms
Power Supplies
Panel Heaters
Pumps and Accessories
Relays
Hour Meters
Wall Mount
Misc. Components
Established in 1985 to serve the needs of the Industrial Control
Industry and Water & Wastewater Industry
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website: www.ingramproducts.com
e-mail: [email protected]
INGRAM
Terms and Conditions
P R O D U C T S, I N C.
One Year Limited Warranty
Ingram Products, Inc. guarantees our components to be free from defects in both
material and workmanship for a period of one year after purchase date to the
original purchaser. This warranty does not cover any part or components
damaged by misuse or modification. In no case shall Ingram Product’s liability
exceed the original cost of the purchased part. Ingram Products reserves the
right to change or modify our parts and components without notice. Ingram
Products has no control over the final assembly of its components or parts and
no liability shall be assumed or accepted for any damage caused by
misapplication, improper installation or damages due to shipping or mishandling.
All warranties are FOB factory only.
Credit
Ingram Products Inc. may extend credit terms of NET 30 DAYS to qualified
customers. Credit is limited to the amount of sale and is not a revolving type
account. Credit limits are approved on a case-by-case basis. Ingram Products
reserves the right to refuse shipping to accounts past due. Credit history is
obtained via Dunn & Bradstreet, Inc. This credit information is held in strict
confidence and shall not be sold or given to anyone.
Returns & Restocking
Ingram Products reserves the option to repair or replace defective or damaged
components. A 40% restocking fee and freight charges will apply to electrical
components that are returned with an approved RMA number.
By placing your order you agree to our terms and conditions.
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
List Price Sheet
VISUAL ALARMS
Description
Model Number
Alarm Light, 4W, Red
LX4
Alarm Light, 10W, Red
LX10
Alarm Light, 10W, (Amber or Green - specify color)
LX10
Alarm Light, 15W w/ SS Flasher, Red
LX15F
Alarm Light, 15W, w/ SS Flasher, (Amber or Green - specify color)
LX15F
Alarm Light, 25W, Red
LX-25
Alarm Light, 25W (Amber, Green, Blue, Clear -specify color)
LX-25
Alarm Light, 40W, Red, w/ Soild State Flasher
LX-40F
Alarm Light, 40W (Amber, Green, Blue, Clear - specify color)
LX-40F
Alarm Light, Mini, 15W, Red
MX-15
Alarm Light, Mini, 15W, Amber
MX-15
Alarm Light, Mini, 25W w/ SS Flasher, Red
MX-25F
Alarm Light, Mini, 25W w/ SS Flasher, Amber
MX-25F
Beacon, Rotating, 12VDC (Red, Amber, Green - specifiy color)
RB1215D
Alarm Light, LED, Sunburst, 120VAC
SB120AC
Alarm Light, LED, Sunburst, 120VAC, New
SBN120AC
Alarm Light, LED,Sunburst,12/24VDC
SB1224AD
Alarm Light, LED, Sunburst, 12/24 VDC or VAC, New
SBN1224AD
Strobe, 12VDC, Red
SLRX-123
Strobe, 12VDC ( Amber, Blue, Green, Clear - specify color)
SLX-123
Strobe, 120VAC w/ Screw in Base
S120VAC
Kit, Strobe, 120 VAC w/ Screw in Base (Red)
SK120VAC
Strobe,120VAC (Amber, Blue, Green, Clear - specify color)
SK120VAC
Kit, Strobe, 12 VDC (Red)
SK12VDC
Strobe, 12VDC ( Amber, Blue, Clear -specify color)
SK12VDC
MiniStrobe, 120VAC (Specify color)
MS120A
1-4
11.00
13.85
16.92
26.92
30.00
25.32
33.02
46.02
53.71
20.66
23.74
41.35
44.43
89.00
49.23
50.77
55.38
56.92
73.89
81.58
29.92
62.80
70.49
58.74
66.43
33.85
5-9
10.29
13.08
16.15
26.15
29.23
20.68
28.37
34.85
42.54
14.29
17.37
28.46
31.54
84.55
45.63
47.17
52.63
54.17
71.42
79.11
28.03
58.80
66.49
56.57
64.26
32.31
10-19
9.46
12.31
15.38
25.38
28.46
20.58
28.28
33.92
41.62
13.77
16.85
27.11
30.18
80.32
43.71
45.25
49.09
50.63
66.92
74.62
25.97
51.77
59.46
48.69
56.38
30.77
20-49
8.34
11.54
14.62
24.62
27.69
19.71
27.40
32.43
40.12
12.75
15.83
25.48
28.55
76.31
41.37
42.91
45.38
46.92
61.28
68.97
23.85
46.80
54.49
44.09
51.78
26.23
50-99
7.38
10.77
13.85
23.85
26.92
17.95
25.65
29.94
37.63
11.43
14.51
23.42
26.49
70.95
37.43
38.97
43.08
44.62
57.48
65.17
21.88
45.77
53.46
41.58
50.82
25.00
1-4
20.69
20.69
5-9
14.17
14.17
10-19
13.34
13.34
20-49
12.72
12.72
50-99
11.98
11.98
1-4
81.83
81.83
21.86
25.23
21.86
21.86
25.23
25.23
25.23
24.45
21.86
24.45
5-9
77.69
77.69
19.68
21.11
19.68
19.68
21.11
21.11
21.11
22.09
19.68
22.09
10-19
71.77
71.77
17.88
19.75
17.88
17.88
19.75
19.75
19.75
20.15
17.88
20.15
20-49
64.92
64.92
16.40
18.12
16.40
16.40
18.12
18.12
18.12
18.58
16.40
18.58
50-99
63.85
63.85
14.14
16.49
14.14
14.14
16.49
16.49
16.49
16.15
14.14
16.15
FLASHERS
Description
Model Number
Flasher, Solid State, AC, 150W
SSF150W
Flasher, Solid State, DC, 12 to 24 Volt
SSF1224D
AUDIBLE ALARMS
Description
Model Number
Sounder, 115VAC, (Red, Gray)
AH115A8R, AH115A8G
Sounder, 12 or 24 VDC, (Red, Gray)
AH1224D8R, AH1224D8G
Piezo, Siren, 12VDC
PS12D
Piezo, Warble, 120VAC
PW120A
Piezo, Warble, 24VDC
PW24D
Piezo, Warble, 12VDC
PW12D
Piezo, Medium Loud Beep, 120VAC
PB120AMB-X
Piezo, Extra Loud Continuous, 120VAC
PB120AXC-X
Piezo, Medium Loud Continuous, 120VAC
PB120AMC-X
Piezo, Medium Loud Continuous, 5-30V AC/DC
PB530ADMC-X
Piezo, Extra Loud, 3-30VDC
PB330DXCX-X
Piezo, Medium Loud Warble, 5-24V AC/DC
PB524ADMW-X
8725 Youngerman Court, Suite 206, Jacksonville, FL 32244‰ 888-875-2221 ‰ 904-778-2444 fax‰ www.ingramproducts.com ‰ [email protected]
Page 1 of 5
Ingram Products
AUDIBLE ALARMS
Description
Model Number
Piezo, Chime, 5-25VDC
PB525DCH-X
Piezo, Ultra Loud Staccato, 6-28VDC
PB628DUT-X
Piezo, Ultra Loud Siren, 6-28VDC
PB628DUS-X
Piezo, Ultra Loud Warble, 6-28VDC
PB628DUW-X
Piezo, Ultra Loud Warble or Continuous, 5-15VDC
PB515DUW/UC-X
Piezo, Ultra Loud Warble or Continuous, 6-18VDC
PB628DUW/UC-X
Piezo, Fast Beep, 6-24V AC/DC
PB624ADFB-X
Piezo, Fast Beep, 120VAC
PB120AFB-X
Piezo, Fast Siren, 120VAC
PB120AFS-X
Piezo, Fast Siren, 6-30 AC/DC
PB630ADFS-X
Sounder31,12-24VDC w/ Beacon
AH03127-BS
Sounder31, 12-24VDC
AH03127-S
Adapter, Silence Module
SMADP
Silence Module, 12VDC, 24VDC or 120VAC
SM12D, SM24D, SM120A
1-4
21.86
21.86
21.86
21.86
21.86
21.86
24.45
25.23
25.23
24.45
67.69
61.54
3.00
17.46
5-9
19.68
19.68
19.68
19.68
19.68
19.68
22.09
21.11
21.11
22.09
65.32
59.46
2.91
17.78
10-19
17.88
17.88
17.88
17.88
17.88
17.88
20.15
19.75
19.75
20.15
60.89
54.55
2.40
17.46
20-49
16.40
16.40
16.40
16.40
16.40
16.40
18.58
18.12
18.12
18.58
55.80
49.22
2.20
16.51
50-99
14.14
14.14
14.14
14.14
14.14
14.14
16.15
16.49
16.49
16.15
50.09
47.35
2.00
15.97
TEMP. CONTROLS, HOUR METERS, COUNTERS, BATTERIES & BACKUPS, TRANSFORMERS
Description
Model Number
Battery Back Up w/ Charger, 12VDC, 8AH
BB-1208AH
Battery Back Up w/ Charger, 12VDC, 5 AH
BB-1205AH
Battery, 12VDC, 8 Amp Hour
B1208AH
Battery, 12VDC, 5 Amp Hour
B1205AH
Charger, Battery, 12VDC
FLC-2207
Charger, Battery, 24VDC
FLC-2210
Mounting Bracket, 5 Amp Hour Battery
MB1205AH
Heater, Panel, 15W, 30W, 35W, 50W
AHC-15, 30, 35, 50
Heater, Mini Space, 15W
MHS-15
Hour Meter, Rectangular Face w/mounting holes, 12-48V DC/AC
HRM1248ADRRSP
Hour Meter, Rectangular Face w/mounting holes, 90 to 230VAC
HRM90230ACRRSP
Hour Meter, Round Face, 12-48V DC/AC
HRM1248ADRSS
Hour Meter, Round Face, 90-230VAC
HRM90230ACRSS
Hour Meter, Rectangular, 12-48V DC/AC
HRM1248ADRRP
Hour Meter, Rectangular Face, 90 to 230VAC
HRM90230ACRRP
Thermostat, Cooling, 120/250 VAC
CTS
Thermostat, Heating, 120/250 VAC
HTS
Counter, Hand Held
HHC4
Counter w/ Actuator Arm
MC01
Transformer, Class 2, UL
50313OF-12
1-4
103.05
77.92
62.68
38.31
36.06
43.26
19.86
50.82
25.74
35.51
35.51
35.51
35.51
35.51
35.51
25.23
25.23
12.89
25.98
25.38
5-9
97.17
73.02
59.62
36.17
33.52
40.22
18.98
49.54
23.58
30.18
30.18
30.18
30.18
30.18
30.18
21.11
21.11
11.35
20.49
24.62
10-19
93.34
69.80
57.65
34.78
31.85
38.22
18.03
43.95
21.43
25.66
25.66
25.66
25.66
25.66
25.66
19.75
19.75
9.75
16.89
23.85
20-49
91.26
68.06
56.58
34.05
30.92
37.11
17.49
40.12
20.34
21.82
21.82
21.82
21.82
21.82
21.82
18.12
18.12
9.31
13.40
23.08
50-99
86.94
64.43
54.32
32.46
29.06
34.86
17.03
37.58
19.57
18.54
18.54
18.54
18.54
18.54
18.54
16.49
16.49
8.91
11.65
22.31
1-4
148.38
148.38
148.38
148.38
180.40
180.40
180.40
5-9
137.80
137.80
137.80
137.80
169.48
169.48
169.48
10-19
127.49
127.49
127.49
127.49
154.54
154.54
154.54
20-49
123.57
123.57
123.57
123.57
142.11
142.11
142.11
50-99
121.18
121.18
121.18
121.18
132.40
132.40
132.40
IS RELAYS, TIMER RELAYS, PROGRAMMABLE RELAYS
Description
Model Number
Relay, Latching, 12V, 10K
ISRL 12-10K
Relay, Latching, 12V. 100K
ISRL 12-100K
Relay, Latching, 24V, 10K
ISRL 24-10K
Relay, Latching, 24V, 100K
ISRL 24-100K
Relay, Dual Channel, 12V, 10K
ISR2 12-10K
Relay, Dual Channel, 12V, 100K
ISR2 12-100K
Relay, Dual Channel, 24V, 10K
ISR2 24-10K
8725 Youngerman Court, Suite 206, Jacksonville, FL 32244‰ 888-875-2221 ‰ 904-778-2444 fax‰ www.ingramproducts.com ‰ [email protected]
Page 2 of 5
Ingram Products
IS RELAYS, TIMER RELAYS, PROGRAMMABLE RELAYS
Description
Model Number
Relay, Dual Channel, 24V, 100K
ISR2 24-100K
Relay, 4 Channel, Multiple Configuration
ISR4-R
Relay, Latching, 4 Channel, Multiple Configuration
ISR4-L
Timer, Multi-range, 24-240V AC/DC
H3B-RC
Timer, Multi-function Analog, Octal Base, 24-240V AC/DC
H3C-R
Timer, Multi-function Analog, 11 pin base, 24 to 240V, AC/DC
H3C-R11
Timer, Multi-function, Digital, 12-48V AC/DC
H5CLR-11-1248V_AC/DC
Timer, Multi-function, Digital, 100 to 240V, AC/DC
H5CLR-11-100-240_AC/DC
Timer, Programmable, Weekly, 12 to 48V AC/DC
APT-9S-1248V_AC/DC
Timer, Programmable, Weekly, 100 to 240V, AC/DC
APT-9S-100-240V_AC/DC
Mounting Frame, Flush, For H Series Timer Relays
Y-50
Mounting Frame, Flush, For APT-9S Programmable Timer
Y-70
Socket, Relay, Octal
10FF-2Z-C3
Socket, Relay, 11 Pin
10FF-3Z-C3
Frame, Flush Mount, for H Series Timer Relays
Y-50
Frame, Flush Mount, for APT-9S Timer Relays
Y-70
1-4
180.40
576.92
576.92
38.26
49.66
55.18
79.42
79.42
188.68
188.68
5.38
7.54
6.40
6.92
5.38
7.54
5-9
169.48
541.78
541.78
35.71
46.35
51.51
74.12
74.12
174.09
174.09
4.95
6.94
6.40
6.92
4.95
6.94
10-19
154.54
491.46
491.46
33.15
43.05
47.83
68.83
68.83
159.51
159.51
4.52
6.34
6.40
6.92
4.52
6.34
20-49
142.11
451.46
451.46
30.62
39.74
44.15
63.54
63.54
144.92
144.92
4.09
5.74
6.40
6.92
4.09
5.74
50-99
132.40
433.38
433.38
26.54
34.97
38.85
55.91
55.91
141.32
141.32
3.66
5.14
6.40
6.92
3.66
5.14
1-4
424.31
217.89
179.15
16.00
27.65
55.91
55.91
55.91
55.91
282.03
282.03
457.03
457.03
308.28
308.28
483.28
483.28
327.52
327.52
502.52
502.52
387.03
387.03
649.52
649.52
413.28
413.28
675.78
675.78
5-9
400.37
203.75
145.92
14.75
23.85
54.08
54.08
54.08
54.08
261.89
261.89
424.38
424.38
286.26
286.26
448.75
448.75
304.14
304.14
466.63
466.63
359.38
359.38
603.14
603.14
383.75
383.75
627.51
627.51
10-19
376.43
189.63
138.26
13.88
22.92
49.62
49.62
49.62
49.62
241.74
241.74
391.74
391.74
264.25
264.25
414.25
414.25
280.74
280.74
430.74
430.74
331.74
331.74
556.74
556.74
354.25
354.25
579.25
579.25
20-49
352.49
175.49
130.91
13.17
20.54
44.77
44.77
44.77
44.77
241.74
241.74
391.74
391.74
264.25
264.25
414.25
414.25
280.74
280.74
430.74
430.74
331.74
331.74
556.74
556.74
354.25
354.25
579.25
579.25
50-99
328.55
161.37
129.38
11.86
19.23
43.08
43.08
43.08
43.08
213.25
213.25
363.25
363.25
243.25
243.25
393.25
393.25
258.25
258.25
408.25
408.25
303.25
303.25
528.25
528.25
333.25
333.25
558.25
558.25
LIQUID SYSTEM CONTROLS
Description
Model Number
Bubbler Air Supply - Contintinuous Run
BASCR30
TUF Pump II, Pressure/Vacuum Pump, 120VAC
NPV20P18M120A
Air Compressor, 15 Ft. Max
HR10WB3
Mounting Bracket, Compressor, HR10WB3
HRMTBKT
Mounting Bracket, TUF Pump, PV20P18M120A
PV20P18M120AMTBRK
Relay, Moisture Sensing, Multi-funcion (MSR) 24VAC
MSR1P24A
Relay, Moisture Sensing, Multi-function (MSR) 120VAC
MSR1P120A
Relay, Liquid Level Control, Multi-function (LLC) 24VAC
LLC2P24A
Relay, Liquid Level Control, Multi-function (LLC) 120VAC
LLC2P120A
Flowmeter, F100, 1/2", 2.5 to 20 LPM, Silicon O-ring
F100-DN15A-S
Flowmeter, F100, 1/2", 5 to 40 LPM, Silicon O-ring
F100-DN15B-S
Flowmeter, F100, 1/2", 2.5 to 20 LPM, Viton O-ring
F100-DN15A-V
Flowmeter, F100, 1/2", 5 to 40 LPM, Viton O-ring
F100-DN15B-V
Flowmeter, F100, 3/4", 3 to 24 LPM, Silicon O-ring
F100-DN20A-S
Flowmeter, F100, 3/4", 8 to 64 LPM, Silicon O-ring
F100-DN20B-S
Flowmeter, F100, 3/4", 3 to 24 LPM, Viton O-ring
F100-DN20A-V
Flowmeter, F100, 3/4", 8 to 64 LPM, Viton O-ring
F100-DN20B-V
Flowmeter, F100, 1", 7 to 56 LPM, Silicon O-ring
F100-DN25A-S
Flowmeter, F100, 1", 13 to 104 LPM, Silicon O-ring
F100-DN25B-S
Flowmeter, F100, 1", 7 to 56 LPM, Viton O-ring
F100-DN25A-V
Flowmeter, F100, 1", 13 to 104 LPM, Viton O-ring
F100-DN25B-V
Flowmeter, F300, 1/2", 2.5 to 20 LPM, Silicon O-ring
F300-DN15A-S
Flowmeter, F300, 1/2", 5 to 40 LPM, Silicon O-ring
F300-DN15B-S
Flowmeter, F300, 1/2", 2.5 to 20 LPM, Viton O-ring
F300-DN15A-V
Flowmeter, F300, 1/2", 5 to 40 LPM, Viton O-ring
F300-DN15B-V
Flowmeter, F300, 3/4", 3 to 24 LPM, Silicon O-ring
F300-DN20A-S
Flowmeter, F300, 3/4", 8 to 64 LPM, Silicon O-ring
F300-DN20B-S
Flowmeter, F300, 3/4", 3 to 24 LPM, Viton O-ring
F300-DN20A-V
Flowmeter, F300, 3/4", 8 to 64 LPM, Viton O-ring
F300-DN20B-V
8725 Youngerman Court, Suite 206, Jacksonville, FL 32244‰ 888-875-2221 ‰ 904-778-2444 fax‰ www.ingramproducts.com ‰ [email protected]
Page 3 of 5
Ingram Products
LIQUID SYSTEM CONTROLS
Description
Model Number
Flowmeter, F300, 1", 7 to 56 LPM, Silicon O-ring
F300-DN25A-S
Flowmeter, F300, 1", 13 to 104 LPM, Silicon O-ring
F300-DN25B-S
Flowmeter, F300, 1", 7 to 56 LPM, Viton O-ring
F300-DN25A-V
Flowmeter, F300, 1", 13 to 104 LPM, Viton O-ring
F300-DN25B-V
1-4
432.52
432.52
695.03
695.03
5-9
401.63
401.63
645.38
645.38
10-19
370.74
370.74
595.74
595.74
20-49
370.74
370.74
595.74
595.74
50-99
348.25
348.25
573.25
573.25
1-4
46.83
46.83
46.83
32.12
41.91
10.77
7.32
9.43
2.00
7.66
12.31
12.31
12.31
12.31
12.31
12.31
12.31
12.31
12.31
61.97
61.97
61.97
61.97
61.97
61.97
63.85
63.85
63.85
63.85
63.85
63.85
65.38
5.31
5.31
5.31
5.31
5.31
5.31
5.31
5.31
5.31
5-9
38.69
38.69
38.69
26.31
34.17
8.82
5.45
7.18
1.83
5.88
10.62
10.62
10.62
10.62
10.62
10.62
10.62
10.62
10.62
58.46
58.46
58.46
58.46
58.46
58.46
61.31
61.31
61.31
61.31
61.31
61.31
62.69
5.15
5.15
5.15
5.15
5.15
5.15
5.15
5.15
5.15
10-19
36.35
36.35
36.35
24.97
32.46
8.38
4.95
6.60
1.52
5.15
8.46
8.46
8.46
8.46
8.46
8.46
8.46
8.46
8.46
52.54
52.54
52.54
52.54
52.54
52.54
54.08
54.08
54.08
54.08
54.08
54.08
55.77
5.08
5.08
5.08
5.08
5.08
5.08
5.08
5.08
5.08
20-49
34.35
34.35
34.35
23.62
30.77
7.95
4.06
6.29
1.15
4.72
6.15
6.15
6.15
6.15
6.15
6.15
6.15
6.15
6.15
45.20
45.20
45.20
45.20
45.20
45.20
46.62
46.62
46.62
46.62
46.62
46.62
48.31
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
50-99
33.86
33.86
33.86
23.23
30.26
7.85
3.74
5.98
1.15
4.29
5.77
5.77
5.77
5.77
5.77
5.77
5.77
5.77
5.77
38.08
38.08
38.08
38.08
38.08
38.08
40.00
40.00
40.00
40.00
40.00
40.00
41.69
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
4.92
ACCESSORIES
Description
Model Number
Bubbler Kit, Level Control, 0 to 10 Foot
BK-10
Bubbler Kit, Level Control, 0 to 20 Ft.
BK-20
Bubbler Kit, Level Control, 0 to 30 Foot
BK-30
Rebuild Kit, Standard, TUF Pump
PV20PKSTD
Rebuild Kit, Deluxe, TUF Pump
PV20PKDLX
Capacitor, TUF Pump
C4MFD250V
Check Valve, Back
AP19CV0012NL
Filter, Air Discharge H10WB3
AP19FV0012PIL
Filter, Air Intake, HR10WB3
HRIF-1
Orifice, Fixed
IM-.016
Lamp, LED, Sunlight Visible, 12V, Red (for LX4)
LSLED-006R12VAD
Lamp, LED, Sunlight Visible, 12V, Amber (for LX4)
LSLED-006A12VAD
Lamp, LED, Sunlight Visible, 12V, Green (for LX4)
LSLED-006G12VAD
Lamp, LED, Sunlight Visible, 24V, Red (for LX4)
LSLED-006R24VAD
Lamp, LED, Sunlight Visible, 24V, Amber (for LX4)
LSLED-006A24VAD
Lamp, LED, Sunlight Visible, 24V, Green (for LX4)
LSLED-006G24VAD
Lamp, LED, Sunlight Visible, 120 VAC, Red (for LX4)
LSLED-006R120VAC
Lamp, LED, Sunlight Visible, 120 VAC, Amber (for LX4)
LSLED-006A120VAC
Lamp, LED, Sunlight Visible, 120 VAC, Green (for LX4)
LSLED-006G120VAC
Bulb, E26 Base, 25 LED Matrix, 12 Volt, Red (for MX)
LS3463E2625012DR
Bulb, E26 Base, 25 LED Matrix, 12 Volt, Amber (for MX)
LS3463E2625012DA
Bulb, E26 Base, 25 LED Matrix, 24 Volt, Red (for MX)
LS3463E2625024DR
Bulb, E26 Base, 25 LED Matrix, 24 Volt, Amber (for MX)
LS3463E2625024DA
Bulb, E26 Base, 25 LED Matrix, 120 Volt, Red (for MX)
LS3463E2625120AR
Bulb, E26 Base, 25 LED Matrix, 120 Volt, Amber (for MX)
LS3463E2625120AA
Bulb, E26 Base,31 LED Matrix, 12 Volt, Red (for LX 25, 40F))
LS3483E2631012DR
Bulb, E26 Base, 31 LED Matrix, 12 Volt, Amber (for LX25, 40F)
LS3483E2631012DA
Bulb, E26 Base, 31 LED Matrix, 24 Volt, Red (for LX25, 40F)
LS3483E2631024DR
Bulb, E26 Base, 31 LED Matrix, 24 Volt, Amber (for LX25, 40F)
LS3483E2631024DA
Bulb, E26 Base, 31 LED Matrix, 120 Volt, Red (for LX25, 40F)
LS3483E2631120AR
Bulb, E26 Base, 31 LED Matrix, 120 Volt, Amber (for LX25, 40F)
LS3483E2631120AA
Bulb, E26 Base, 31 LED Matrix, 120 Volt, White (for LX25, 40F)
LS3483E2631120AW
Bulb, Incandescent, 15 Watt, 12V, S-15, Clear
LSA15C15W12V
Bulb, Incandescent, 25 Watt, 12 Volt, S-15, Clear (for LX25)
LSA15C25W12V
Bulb, Incandescent, 40 Watt, 12 Volt, S-15, Clear (for LX40-F)
LSA15C40W12V
Bulb, Incandescent, 15 Watt, 24 Volt, S-15, Clear
LSA15C15W24V
Bulb, Incandescent, 25 Watt, 24 Volt, S-15, Clear (for LX25)
LSA15C25W24V
Bulb, Incandescent, 40 Watts, 24V, S-15, Clear (for LX40)
LSA15C40W24V
Bulb, Incandescent, 10 Watt, 12 Volts, S-11, Clear
LSA11C10W12V
Bulb, Incandescent, 15 Watt, 12 Volt, S-11, Clear (for MX15)
LSA11C15W12V
Bulb, Incandescent, 25 Watt, 12 Volt, S-11, Clear (for MX25F)
LSA11C25W12V
8725 Youngerman Court, Suite 206, Jacksonville, FL 32244‰ 888-875-2221 ‰ 904-778-2444 fax‰ www.ingramproducts.com ‰ [email protected]
Page 4 of 5
Ingram Products
ACCESSORIES
Description
Model Number
Bulb, Incandescent, 10 Watt, 24 Volt, S-11, Clear
LSA11C10W24V
Bulb, Incandescent, 15 Watt, 24 Volt, S-11, Clear (for MX15)
LSA11C15W24V
Bulb, Incandescent, 25 Watt, 24 Volt, S-11, Clear (for MX25F)
LSA11C25W24V
1-4
5.31
5.31
5.31
5-9
5.15
5.15
5.15
10-19
5.08
5.08
5.08
20-49
5.00
5.00
5.00
50-99
4.92
4.92
4.92
1-4
25.87
25.87
25.87
25.87
31.23
31.23
31.23
46.48
46.48
46.48
46.48
64.57
64.57
64.57
64.57
75.00
75.00
75.00
75.00
124.00
124.00
172.00
5-9
25.04
25.04
25.04
25.04
30.22
30.22
30.22
44.90
44.90
44.90
44.90
58.54
58.54
58.54
58.54
73.00
73.00
73.00
73.00
120.00
120.00
166.00
10-19
24.21
24.21
24.21
24.21
29.19
29.19
29.19
43.32
43.32
43.32
43.32
53.52
53.52
53.52
53.52
66.80
66.80
66.80
66.80
116.19
116.19
158.40
20-49
23.38
23.38
23.38
23.38
28.16
28.16
28.16
41.74
41.74
41.74
41.74
49.85
49.85
49.85
49.85
62.12
62.12
62.12
62.12
112.47
112.47
153.10
50-99
22.66
22.66
22.66
22.66
27.28
27.28
27.28
40.40
40.40
40.40
40.40
47.09
47.09
47.09
47.09
58.68
58.68
58.68
58.68
108.87
108.87
147.10
OEM net price DIN RAIL MOUNT POWER SUPPLY
Description
Model Number
Power Supply, 5VDC @ 1 Amps
DRA05-05
Power Supply, 12VDC @ .42 Amps
DRA05-12
Power Supply, 15VDC @ 0.34 Amps
PSD05-15
Power Supply, 24VDC @ .21 Amps
DRA05-24
Power Supply, 5 VDC @ 2 Amps
DRA10-05
Power Supply, 12VDC @ 0 .83 Amps
DRA10-12
Power Supply, 15VDC @ 0 .67 Amps
PSD10-15
Power Supply, 5VDC @ 3.6 Amps
DRA18-05
Power Supply, 12VDC @ 1.5 Amps
DRA18-12
Power Supply, 15VDC @ 1.2 Amps
DRA18-15
Power Supply, 24VDC @ .75 Amps
DRA18-24
Power Supply, 5VDC @ 6 Amps
DRA30-05
Power Supply, 12VDC @ 2.5 Amps
DRA30-12
Power Supply, 24VDC @ 1.25 Amps
DRA30-24
Power Supply, 48VDC @ 0.625 Amps
DRA30-48
Power Supply, 5VDC @ 10 Amps
DRA60-05
Power Supply, 12VDC @ 5 Amps
DRA60-12
Power Supply, 24VDC @ 2.5 Amps
DRA60-24
Power Supply, 48VDC @ 1.25 Amps
DRA60-48
Power Supply, 12VDC @ 10 Amps
DRA120-12
Power Supply, 24VDC @ 5 Amps
DRA120-24
Power Supply, 24VDC @ 10 Amps
DRA240-24
Price and specifications subject to change without notice. All prices F.O.B. Jacksonville, Florida excluding tax and
packaging. Terms are Net 30 with approved credit. Most items shipped bulk. Volume pricing, blanket prices and OEM
DISCOUNTS available.
4 Watt Alarm Light
Part No. LX4
The Ingram LX4 is a NEMA and UL Type 3,
3R, 4, 4X, 12 and 13 low cost, low profile,
alarm light or pilot light suitable for heavy duty
applications inside and outdoors. The lens is
molded from shatter resistant GE Lexan.
This alarm light is particularly useful on small
panels.
Features
UL Recognized
Low profile
Easy to install
Tamper Resistant
Shatter resistant GE Lexan globe
Can be used as a pilot light
Available in red, amber and green
Other colors available by special order
Choose from 12V, 24V or 130V
Technical Specifications
Model: LX4 specify color when ordering
UL Recognized E121431 Type 3, 3R, 4, 4X, 12, 13
Voltage: 130 VAC Standard
24 VAC/DC available
12 VAC/DC available
Current Draw: 130 VAC = 33 mA
24VAC/DC = 167 mA
12VAC/DC = 333 mA
Must specify voltage when ordering
1 1/2"
1"
Lexan Lens
Gasket
1/2"
1 3/8"
1/2"
Ø 3/16"
Enclsoure Wall
6-32 Hex Nuts
Ø 9/16"
6-32 Hex Stand-off
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
Hole Pattern For Mounting
(904)778-1010 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Sunlight Visible LED Lamp
P R O D U C T S, I N C.
Part No. - LSLED-006 Series - Refer to Key for Specific Part Number
Ingram has a large variety of AC and DC LED bulbs
for your alarm light needs. This series will fit in our
LX4 alarm. The LED package fits all 9mm, T3-1/4
base sockets. For applications where low power,
sunlight visible lighting is required.
Features
Technical Specifications
Daylight visible
Fits 9mm (T3-1/4) socket
Great for low voltage warning lights
Durable, long life
Available in red, green and amber
Much greater resistance to shock and
vibration than conventional filament bulbs.
Applications
Panel mount pilot lights
Indicator lights for instrumentation
Operating voltage: 12V & 24V AC or DC, 120VAC*
Current draw:
30mA @ 12V
30mA @ 24V
4mA @ 120V
Operation Life: 50,000 hrs
Contact Polarity: Bipolar
* Be aware that due to power dissipation constraints
the 120VAC version is not as bright.
7/16"
LSLED-006zxxxxxx
COLOR (z)
R=red
A=amber
G=green
1/16"
15/16"
VOLTAGE (x)
12VAD=12VDC/VAC
24VAD=24VDC/VAC
120VAC=120VAC
3/8"
Dimensions
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
Example: Red LED lamp,
24 VDC or 24 VAC would
be LSLED-006R24VAD.
Part Number Ordering Key
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
10 Watt Alarm Light
Part No. LX10
The Ingram LX10 is a NEMA and UL Type 3,
3R, 4, 4X, 12 and 13 low cost, low profile, panel
mount alarm light suitable for heavy duty
applications inside and outdoors. The lens is
molded from shatter resistant GE Lexan. This
alarm light is particularly useful on small panels.
Features
UL Recognized
Low profile
Easy to install
Tamper Resistant
Shatter resistant GE Lexan globe
Can be used as a pilot light
Available in red, amber, and green
Other colors available by special order
Choose from 12V, 24V or 130V
Technical Specifications
Model: LX10 specify color when ordering
UL Recognized: Type 3, 3R,4, 4X, 12, 13
Voltage: 130 VAC, 10 Watts Standard
24 VAC/DC, 7 Watts available
12 VAC/DC, 7 Watts available
Current Draw: 130VAC = .077 mA
24 VAC/DC = 420 mA
12 VAC/DC = 830 mA
Must specify voltage when ordering
2"
1 3/8"
Lexan Lens
Gasket
3/4"
3/4"
1 3/4"
Ø 3/16"
Enclsoure Wall
Ø 7/8"
or 1/2" KO
6-32 Hex Nuts
Hole Pattern for Mounting
6-32 Hex Stand-off
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904)778-1010 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Flashing 15 Watt Alarm Light
Part No. LX15F
The Ingram LX15F is a NEMA and
UL Type 3, 3R, 4, 4X, 12 and 13
low cost, low profile, flashing panel
mount alarm light suitable for heavy
duty applications inside and
outdoors. The lens is molded from
shatter resistant GE Lexan. This
alarm light is particularly useful on
small panels.
Features
UL Recognized
Low profile
Easy to install
Tamper Resistant
Shatter resistant GE Lexan globe
Supplied with 15W bulb and Solid State
Flasher (part no. SSF150W)
Can be used as a pilot light
Available in red, amber and green
Other colors available by special order
Technical Specifications
Model: LX15FA specifiy color when ordering
Flashes Per Minuet: 75FPM
UL Recognized: Type 3, 3R, 4, 4X, 12, 13
Voltage: 130 VAC Standard
Current Draw: 130VAC = 125 mA
Must be used with Ingram's solid state flasher Part no. SSF150W
2"
Lexan Lens
Gasket
1 3/8"
3/4"
1 3/4"
3/4"
Enclsoure Wall
Flasher
Ø 3/16"
6-32 Hex Nuts
Ø 1.0"
Ø 7/8" or 1/2' KO
6-32 Hex Stand-off
Hole Pattern for Mounting
NOTE: The LX15F alarm light must be used with Ingram's SSF150W solid state flasher in order to
comply with UL requirements.
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904)778-1010 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Alarm Light
P R O D U C T S, I N C.
Part No.: LX25
The Ingram LX25 is a UL 3, 3R, 4, 4X, 12, 13
low cost alarm light suitable for heavy duty
applications inside and outdoors. The lens is
molded from tough shatter resistant GE
Lexan. This tamper resistant light is
particularly useful in areas with high ambient
noise levels where an audible signal may not
be heard.
Features
UL Recognized for use with UL
NEMA Type 3, 3R, 4, 4X, 12
and 13 enclosures (E121431)
Lens molded from GE Lexan
that is shatter resistant and UV
stabilized
Low profile, top mounted gives
360 degree visibility
Hose down proof
Available in 5 colors: Red, Blue,
Green, Amber and Clear
Technical Specifications
Voltage: 12V, 24V AC/DC, 120VAC
Current Draw:120VAC
0.21 Amps max.
12V AC/DC 2.1 Amps max.
24V AC/DC 1.1 Amps max.
12 and 24 Volt 25 watt bulbs are available for special order.
Supplied with 25 watt, 120V bulb.
2"
4 3/8"
2"
3 5/8"
1 3/8"
1 3/8"
4
T
0 W AT
2"
3 1/4"
Ø 1/4"
8-32 TAP
(2 REQ'D)
2"
1 1/4"
Ø 2"
or 1 1/2
Knock Out
Cut-Away View
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Hole Pattern For Mounting
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Shatter Resistant
G.E. Lexan Globe
Gasket
Enclosure Wall
2
T
5W AT
#8 - 32 Mounting
Screw
2" Knock out
or 2" hole
Mounting Bracket
LX25 Assembly
INGRAM
Flashing Alarm Light
P R O D U C T S, I N C.
Part No.: LX40F
The Ingram LX40F is a UL 3, 3R, 4, 4X,
12, 13 low cost flashing alarm light
suitable for heavy duty applications
inside and outdoors. The lens is molded
from tough shatter resistant GE Lexan.
This tamper resistant light is particularly
useful in areas with high ambient noise
levels where an audible signal may not
be heard.
Features
UL Recognized for use with UL
NEMA Type 3, 3R, 4, 4X, 12
and 13 enclosures (E121431)
Lens molded from GE Lexan
that is shatter resistant and UV
stabilized
Low profile, top mounted gives
360 degree visibility
Hose down proof
Available in 5 colors: Red, Blue,
Green, Amber and Clear
Technical Specifications
Voltage: 130VAC
Current Draw: 0.34 Amps max.
12 and 24 Volt available for special order
Supplied with 40 watt bulb
Supplied with Ingram's SSF150W solid state flasher
*The LX40F must be used with Ingram's SSF150W flasher in order to comply with UL requirements.
2"
4 3/8"
2"
3 5/8"
1 3/8"
1 3/8"
4
T
0 W AT
2"
Ø 1/4"
3 1/4"
8-32 TAP
(2 REQ'D)
2"
1 1/4"
Ø 2"
or 1 1/2
Knock Out
Ø 1.0"
Cut-Away View
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Hole Pattern For Mounting
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Shatter Resistant
G.E. Lexan Globe
Gasket
Enclosure Wall
4
T
0W AT
1 1/2" Knockout
#8 - 32 Mounting
Screw
Mounting Bracket
Ingram
SSF150W
Flasher
LX40F Assembly
12 and 24 Volt Incandescent Bulbs
INGRAM
P R O D U C T S, I N C.
Part No. - LSA15C Series - Refer to Key for Specific Part Number
Ingram has a large variety of low voltage tungsten
filament incandescent bulbs for your alarm light
needs. This series will fit in our LX25 and LX40F
visual alarms. These screw-in type bulbs all fit
standard medium base (E26) sockets.
Note: For AC applications using the low voltage 40
watt bulbs with the LX40F make sure to use an
Ingram SSF150W AC Flasher. For DC applications
use the SSF1224D DC Flasher.
Features
Fits standard medium base (E26) socket
Great for low voltage warning lights
Economical lighting for many applications
Technical Specifications
Bulb type S-15
Available in 15, 25, and 40 watts
Available in 12 and 24 volts
Clear glass bulb
LSA15CxxWxxV
1 7/8"
Wattage
2 1/2"
3 3/8"
Voltage
Example: A 25 watt bulb operating at
12 volts would be LSA15C25W12V.
STANDARD
E26 BASE
Dimensions
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
Part Number Ordering Key
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Alarm Light
P R O D U C T S, I N C.
Part No.: MX15
The Ingram MX15 is a UL Type 3, 3R, 4, 4X, 12, 13
low cost alarm light suitable for heavy duty applications
inside and outdoors. The lens is molded from tough
shatter resistant GE Lexan. This light is particular
useful in areas with high ambient noise levels where
an audible signal may not be heard.
Features
UL Recognized for use with UL
NEMA Type 3, 3R, 4, 4X, 12 and 13
enclosures (E121431)
Lens molded from GE Lexan that is
shatter resistant and UV stabilized
Top mounted gives 360 degree
visibility
Easy to install - One hole to punch
Hose down proof
Available in red or amber
Technical Specifications
Voltage: 12V, 24V AC/DC, 120VAC
Current Draw: 120VAC
0.125 amps
12V AC/DC 1.25 amps
24V AC/DC 0.625 amps
12 and 24V, 15W bulbs are available for special order.
Supplied with 15 watt, 120V bulb.
2.247"
Ø 1.875"
or 1.5"
knock
out
1.843"
3.0"
.687"
Cut-Away View
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Hole Pattern For Mounting
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Shatter Resistant
G.E. Lexan Globe
Nylon Thumb
Screw
Gasket
Enclosure Wall
.250" Max
1.5" knock out
or 1.875 Hole
15 Watt Bulb
Socket with 36"
Wire leads
Locknut
MX15 Assembly
INGRAM
Flashing Alarm Light
P R O D U C T S, I N C.
Part No.: MX25F
The Ingram MX25F is a UL Type 3, 3R, 4, 4X, 12, 13
low cost flashing alarm light suitable for heavy duty
applications inside and outdoors. The lens is molded
from tough shatter resistant GE Lexan. This light is
particularly useful in areas with high ambient noise
levels where an audible signal may not be heard.
Features
UL Recognized for use with UL
NEMA Type 3, 3R, 4, 4X, 12 and 13
enclosures (E121431)
Lens molded from GE Lexan that is
shatter resistant and UV stabilized
Top mounted gives 360 degree
visibility
Easy to install - One hole to punch
Hose down proof
Available in red or amber
Technical Specifications
Voltage: 120VAC
Current Draw: .21 Amps max.
12 and 24 Volt available for special order
Supplied with 25 watt bulb
Supplied with Ingrams SSF150W solid state flasher
*The MX25F must be used with Ingram's SSF150W flasher in order to comply with UL requirements.
2.247"
Ø 1.875"
or 1.5"
knock
out
1.843"
3.0"
.687"
Ø 1.0"
Cut-Away View
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Hole Pattern For Mounting
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Shatter Resistant
G.E. Lexan Globe
Nylon Thumb
Screw
Gasket
Enclosure Wall
.250" Max
1.5" knock out
or 1.875 Hole
15 Watt Bulb
Socket with 36"
Wire leads
Locknut
SSF150W Flasher
MX25F Assembly
12 and 24 Volt Incandescent Bulbs
INGRAM
P R O D U C T S, I N C.
Part No. - LSA11C Series - Refer to Key for Specific Part Number
Ingram has a large variety of low voltage tungsten
filament incandescent bulbs for your alarm light
needs. This series will fit the MX15 and MX25F
alarm lights. These screw-in type bulbs all fit
standard medium base (E26) sockets.
Note: For AC applications using low voltage 25 watt
bulbs with the MX25F make sure to use an Ingram
SSF150W AC Flasher. For DC applications use the
SSF1224D DC Flasher.
Features
Fits standard medium base (E26) socket
Great for low voltage warning lights
Economical lighting for many applications
Technical Specifications
Bulb type S-11
Available in 10, 15, and 25 watts
Available in 12 and 24 volts
Clear glass bulb
LSA11CxxWxxV
1 3/8"
Wattage
1 1/8"
2 1/8"
Voltage
Example: A 10 watt bulb operating at
24 volts would be LSA11C10W24V.
STANDARD E26 BASE
Dimensions
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
Part Number Ordering Key
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Sunlight Visible LED Bulbs
P R O D U C T S, I N C.
Part No. - LS3483 & LS3463 Series - Refer to Key for Specific Part Number
Ingram has designed a variety of daylight
visible, low power LED bulbs for your alarm
needs. The LS3483 series fits Ingram's LX25
and LX40F alarm lights. The LS3463 series fits
our MX15 and MX25F alarm lights. These
screw-in type bulbs fit standard medium base
(E26) sockets. Unlike incandescent bulbs that
fail catastophically when the filament burns out
or is broken, LED matrix designs will continue
to light, should a single LED or a row fail.
NOTE: Use Ingram's SSF1224D DC Flasher or
SSF150W AC Flasher in applications where
flashing bulbs are required. For proper flash
operation with the SSF150W at 120VAC, you
will need a 3K, 20 watt resistor in parallel
with the bulb. See reverse side for illustration.
Features
Fits standard medium base (E26) socket
Stays lit should one or several LEDs fail
Reduced power consumption makes smaller
battery backups possible
Durable - not as fragile as incandescents
Available in up to three colors
LS3483 Series
Always remove power
before servicing any bulb
LS3463 Series
Technical Specifications
Available in 12VDC, 24VDC and 120 volts.
LS3483 - 31 LED matrix.
Available in red, amber and white *
Current draw:
23mA @ 120VAC
76mA @ 24VDC
82mA @ 12VDC
LS3463 - 25 LED matrix.
Available in red and amber
Current draw:
27mA @ 120VAC
93mA @ 24VDC
115mA @ 12VDC
LS xxxx E26 xx yyyy z
1 5/16"
Series
No. of LEDs (25,31)
2 3/8"
3 1/8"
1 5/16"
Voltage
012D = 12VDC
024D = 24VDC
120A = 120VAC
Example:
LS3483E2631024DR = Red 31LED 24VDC
* White available for LS3483 Series, 120VAC only.
Dimensions
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
LED color
R = Red
A = Amber
W = White*
Part Number Ordering Key
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Hookup for LED bulbs designed to operate at 120VAC.
H
R
BK
3K RESISTOR
20 WATT
N
SSF150W
FLASHER
B
Hookup for LED bulbs designed to operate at 12 or 24 VDC.
SSF1224D
FLASHER
E
L
12 or 24 Volt
DC Source
INGRAM
Solid State Flasher
P R O D U C T S, I N C.
Part No.: SSF150W
This highly reliable encapsulated solid state
flasher is designed for use with incandescent or
LED resistive loads. It can be used to directly
flash 15 to 150-watt incandescent light bulb.
On/Off Recycling Ratio
Reset
Applied
Input Power
Off
E121431
Output
Energized
De-energized
On
Time
Off
Time
On
Time
Off
Time
On
Time
Off
Time
On
Time
Off
Time
0.4 seconds off time followed by 0.4 second on time
Technical Specifications
Operating voltage is 120 volts AC
Full wave AC output
Maximum tungsten load is 1.25 amps
Minimum pilot load is 10 VA
H
Flash rate: 75 flashes per minute ±5%, factory set
N
Operating temperature is -20°C to 40°C
R
BK
Insulated 20 gauge wire leads are 6" long
SSF150W
FLASHER
3K RESISTOR
20 WATT
For flasher to operate properly with low current draw
LED bulbs, a shunt resistor should be used
1/2"
120 VAC INPUT
Ø 15/16"
Ø 1/4"
MAX LOAD
TUNGSTEN 1.25 amps
PILOT DUTY 10 VA
1.000"
1.000"
FLASHER
1 1/2"
Connection
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Solid State DC Flasher
P R O D U C T S, I N C.
Part No. SSF-1224D
This encapsulated solid state flasher is designed
for use with standard DC incandescent filament
bulbs or the newer LED matrix lighting. Comes
with built-in mounting tab.
Technical Specifications
Operating voltage: 12VDC to 24VDC
Load current: Up to 15A
Duty Cycle: 50%
Flashing rate of 75 FPM
Operating temperature -20˚C to 40˚C
Screw clamp terminals with pressure plates
allows connection without spade terminals.
On/Off Recycling Ratio
Reset
Applied
Input Power
Off
Output
Energized
De-energized
On
Time
Off
Time
On
Time
Off
Time
On
Time
Off
Time
On
Time
Off
Time
0.4 seconds off time followed by 0.4 second on time
9/16"
1 3/16"
9/16"
Ø 1/4" x 3
12 to 24VDC
1 5/8"
2 9/16"
2 7/8"
1 13/16"
B
1/2"
5/8"
E
L
3/4"
1 3/16"
FRONT
R. SIDE
L
B
Connection
E
Dimensions
BULB
BOTTOM
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Strobe Light
P R O D U C T S, I N C.
Part No.: SLX-123N
The Ingram SLX-123N is a adjustable low cost
strobe light suitable for heavy duty applications
inside and outdoors. It can be set by the user for
three intensity levels: low, medium and high. The
lens is molded from tough shatter resistant GE
Lexan. This tamper resistant strobe is
particularly useful in areas with high ambient
noise levels where an audible signal may not be
heard.
The SLX-123N strobe requires a DC power
source. Ingram's BB-12 back-up battery with
charger is suggested.
Features
Lens molded from GE Lexan
that is shatter resistant and UV
stabilized
Low profile, top mounted gives
360 degree visibility
Hose down proof
Available in 5 colors: Red, Blue,
Green, Amber and Clear
Technical Specifications
Voltage: 12 or 24 VDC
Current Draw: 115 mA ±20%
140 mA Max
Supplied with Xenon Flash Tube and circuit board
Requires DC power source
Wire leads measure at least 6" from grommet
1.969
4.394
1.969
3.625
1.313
1.313
1.969
3.250
Ø .107 x 2
6-32 Tap
1.969
Ø .875
Ø .250 x 4
Cut-Away View
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Hole Pattern For Mounting
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Shatter Resistant
G.E. Lexan Globe
Gasket
Zenon Flash Tube
Assembly
Standoff
1/2" Grommet
Enclosure Wall
#8-32 Mounting
Screw
SLX-123N Assembly
AC Strobe
The Ingram SK120VAC is a Nema
4X low cost, low profile strobe
suitable for heavy duty applications
inside and outdoors. The lens is
molded from shatter resistant GE
Lexan and the strobe is hermetically
sealed. This tamper resistant
strobe is particularly useful in areas
with high ambient noise levels
where an audible signal may not be
heard.
Features
Nema 4X
Hermetically sealed
Xenon U tube
Rated for 5 million flashes
Low current draw
Easy to install
Tamper Resistant
Gasketed
Available in 5 colors (red,
amber, green, clear, blue)
Technical Specifications
Model: SK120VAC
Voltage: 120VAC
Current Draw: 220mA max
110mA avg.
Flashes per Minute: 40
Standard incandescent screw
in light base - easy to install
1 5/8"
4 3/8"
3 5/8"
1 5/8"
1 3/8"
1 3/8"
1 3/8"
3 1/4"
8-32 TAP
(2 REQ'D)
1 3/8"
Ø 2 3/8"
or 2 1/2" knock-out
Cut-Away View
4949 Sunbeam Rd. Building 12 Jacksonville, FL 32257
Ø 1/4"
Hole Pattern for Mounting
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
AC Strobe
P R O D U C T S, I N C.
Part No. : S120VAC
The Ingram S120VAC is a low cost, low profile strobe suitable
for heavy duty applications. It is hermetically sealed and
molded from shatter resistant plastic. This strobe is particularly
useful in areas with high ambient noise levels where an audible
signal may not be heard.
Features
Xenon U tube
Rated for 5 million flashes
Low current draw
Easy to install
Molded from shatter
resistant plastic
Hermetically sealed
Technical Specifications
Voltage: 120VAC
Current Draw: 220mA max
110mA avg.
Flashes per Minute: 40
Standard incandescent screw
in light base - easy to install
3 1/16"
4"
2 3/16"
8725 Youngerman Court, Ste 206,Jacksonville, FL 32244
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
DC Strobe
P R O D U C T S, I N C.
Part No.: SK12VDC
The Ingram SK12VDC is a Nema
4X low cost, low profile strobe
suitable for heavy duty applications
inside and outdoors. The lens is
molded from shatter resistant GE
Lexan and the strobe is hermetically
sealed. This tamper resistant
strobe is particularly useful in areas
with high ambient noise levels
where an audible signal may not be
heard.
Features
Nema 4X
Hermetically sealed
Xenon U tube
Rated for 5 million flashes
Low current draw
Easy to install
Tamper Resistant
Gasketed
Available in 5 colors (red,
amber, green, clear, blue)
Technical Specifications
Voltage: 12VDC
Current Draw: 90mA max
75mA avg.
Flashes per Minute: 30
24VDC available for special order
1.688"
1.688"
1.392"
4 3/8"
3 5/8"
1 3/8"
1.392"
3 1/4"
8-32 TAP
(2 REQ'D)
1.392"
Ø 2.914"
or 2 1/2" knock-out
Cut-Away View
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Ø .25"
Hole Pattern For Mounting
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
AC MiniStrobe
P R O D U C T S, I N C.
Part No. MS120A
e-
Technical Specifications
Operating voltage: 120VAC
Current draw: Peak 28mA, Avg. 17mA
Candle power: 60,000
Flash rate: 90 +5%
Life expectancy: 700 hours
Operating temperature: -20°C to 40°C
Electrical connection: 3/16" quick connects
ph
as
Features
UL Recognized for use with UL NEMA
Type 3R, 4X, 12 and 13 enclosures.
E121431
Molded from GE Lexan
Hermetically sealed for corrosion
resistance and reliablility.
Lens and base are fusion welded to
make one solid sealed unit.
Available in green only.
Easy three-hole mounting makes
strobe light tamperproof.
Provides 360° visibility.
ou
t
This rugged little industrial strobe light is UL
Recognized for use on UL Listed Type NEMA
3, 3R, 4, 4X, 12 and13 enclosures. It is
designed for use as a hard to ignore pilot light
or to be mounted on top of a small control
panel as an alarm beacon. It mounts through
a 1/2" knock out and requires two 1/4" drilled
holes. It can be installed in panels up to 1/4"
thick.
2.125"
Ø 7/8"
3/16" QUICK
CONNECTS
Ø 1/4"
2.750"
CL
8-32 STUDS
GASKET
ENCLOSURE WALL
UP TO .250" THICK
LOCK WASHER
.758"
.758"
HEX NUT
Hole Pattern For Mounting
8725 Youngerman Court Suite 206 Jacksonville, FL 32257
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
High Power MiniStrobe
P R O D U C T S, I N C.
Part No. HS Ministrobe: MSN120VAC
Features
ar
y
The Ingram High Power MiniStrobe is a super
bright, daylight visible strobe light that can not be
ignored. It is designed for use as an alarm
beacon. It requires only a 3/4" knockout (1-1/16"
diameter hole). It can be installed on panels up to
1/4" thick. We've modified the connection barrier
to simplify installation. Meets NEMA 3, 3R, 4, 4X,
12, and, 13 environments.
Technical Specifications
Voltage: 120VAC
Current: 24mA
in
Super Bright - Daylight Visible
Molded from GE Lexan
Hermetically sealed for corrosion resistance
and reliability
Available with red, amber, green or blue lens
Easy one hole mounting makes light tamper
proof
Provides 360° visibility
Comes with gasket and nylon mounting nut
90 flashes per minute
el
im
FPM:
pr
2 1/8"
2 7/8"
Ø 1 1/16"
or 3/4" knockout
4"
3/4" NPT
C
120VAC HOOKUP:
C
F
FRONT
2"
1"
F
NOT USED
C = NEUTRAL
F = HOT
Dimensions
Hole Pattern for Mounting
BOTTOM
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
AC/DC LED Alarm Light
P R O D U C T S, I N C.
Part No. SunBurst: SB120AC, SB1224AD
The Ingram SunBurst Strobe is a Super Bright,
daylight visible LED that can not be ignored. It is
designed for use as an alarm beacon. It mounts
through a 1/2" knock out and requires two 1/4"
drilled holes. It can be installed on panels up to
1/4" thick. UL Recognized for use in Type 3, 3R,
4, 4X, 12, and, 13.
Features
Super Bright - Daylight Visible
UL Recognized - E121431
2 operation modes: steady on and flash
Molded from GE Lexan
Hermetically sealed for corrosion
resistance and reliability
Available with Red, Amber or Green lens
Easy three-hole mounting makes light
tamper proof
Provides 360° visibility
Gasket and mounting hardware included
Technical Specifications
Voltage:
SB120AC - 120VAC
SB1224AD - 12/24VDC or VAC
Current:
SB120AC - 150mA
SB1224AD - 395mA
Flashes per Minute: 60
2 1/8"
Ø 7/8"
Ø 1/4"
2 3/4"
CL
3/4"
Red = Flash
3/4"
Blue = Steady on
Black = Common (AC/DC Model)
White = Common (AC Model)
Front View
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Hole Pattern for Mounting
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Sunlight Visible LED Alarm Light
INGRAM
P R O D U C T S, I N C.
Part No. SunBurst: SBN120AC, SBN1224AD
ar
y
The Ingram SunBurst is a super bright, daylight
visible LED light that can not be ignored. It is
designed for use as an alarm beacon. It requires
only a 3/4" knockout (1-1/16" diameter hole) to
mount. It can be installed on panels up to 1/4"
thick. Meets NEMA 3, 3R, 4, 4X, 12, and, 13
requirements.
el
im
in
Features
Technical Specifications
Super Bright - Daylight Visible
Voltage: SBN120AC
120VAC
2 operation modes: steady on and flash
SBN1224AD
12/24VDC or VAC
Molded from GE Lexan
Hermetically sealed for corrosion resistance
Current : SBN120AC
48mA (max.)
and reliability
SBN1224AD
230mA (max.)@12V
Available with red, amber, green or blue lens
125mA flashing
Easy one hole mounting makes light tamper
110mA (max.)@24V
proof
67mA flashing
Provides 360° visibility
Comes with gasket and Lexan mounting nut
Flash rate: 60 flashes per minute
pr
2 1/8"
2 7/8"
Ø 1 1/16"
or 3/4" knockout
4"
3/4" NPT
S C F
FRONT
2"
1"
S C F
TWO WIRE HOOKUP:
S + C = STEADY
F + C = FLASHING
FOR DC APPLICATIONS
C = NEGATIVE
Dimensions
Hole Pattern for Mounting
BOTTOM
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
DC Rotating Beacon
Part No.: RB1215D
The Ingram RB1215 is a NEMA
Type 3, 3R, 12 and 13 low cost
rotating beacon suitable for heavy
duty applications inside and
outdoors. Applications include, but
are not limited to, use on vehicles,
machines, and control panels. This
rotating beacon is particularly useful
in areas with high ambient noise
levels where an audible signal may
not be heard.
Features
NEMA Type 3, 3R, 12,and 13
Variable speed motor for rotation
Gasketed
Stainless steel ring
Globe molded from shatter
resistant polycarbonate
Available in 3 colors (red,
amber, and green)
Technical Specifications
Voltage: 12VDC
Current Draw: 1.26A max
Bulb: 15 Watts Max
Power must be supplied by UL Class 2
power source
4 3/4"
1/2" Knock
Out or Ø 7/8"
2 1/8"
Ø 1/4"
6 1/4"
3/8"
1 1/2"
1 1/2"
Gasket
Hole Pattern for Mounting
8725 Youngerman Court Ste. 206 Jacksonville, FL 32257
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
RB1215D Assembly
Wire Leads
10-32 Studs
Gasket
Enclosure Wall
10-32 Washer
10-32 Hex Nut
INGRAM
DC Audio Alarm & Beacon
P R O D U C T S, I N C.
Part No. Sounder31: AH03127-BS
The Sounder31 siren with LED was
designed for use in industrial control
systems as well as for use in fire alarm
and security systems. The combination
audio and visual is particularly useful in
areas with high ambient noise levels
where an audible signal may not be
heard.
Features
31 tones selectable by dip switch
Weather proof
High sound output
Variable output
Low current consumption
12/24 VDC auto select
High efficiency lens for maximum
light output
High Reliability LED Light Source
Two sets of in and out terminals for
parallel operation
Multiple mounting methods
Easy one hole mounting - 1/2" KO or 7/8" hole
Add 8-32 screw to make unit tamper proof
Supplied with UL Listed cord grip that
accepts wire from 1/8" - 3/16" OD
Technical Specifications
Voltage: 12~24 VDC
Current Draw: 34mA max
Vertical Mounting not recommended
for outdoor use
Do not use two knock outs in front of unit
knock out and insert
8-32 screw through
panel to make unit
tamper proof
Bottom View
Flashing
Beacon
3 7/8"
3/4"
4 3/8"
Do not use
Do not use
4 3/8"
3 7/8"
Gasket
3/4"
Cord Grip
Gasket
Enclosure wall
Cord Grip
Enclosure Wall
Mounting for Indoor Use
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
888-875-2221 ph
Flashing
Beacon
Mounting for Outdoor Use
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Piezo Sound Alarm
P R O D U C T S, I N C.
Part No.: See Chart
The PW and PB series of panel mount piezo
sound alarms was designed to be a
cost-effective audible alarm for use in industrial
control systems. It is molded from tough GE
Valox, weatherproof and suitable for use in
corrosive environments, outdoor and indoor.
*Designed for use with Ingram's SM120A
Silence Module
Features
Technical Specifications
Distinctive tones cut through ambient noise
UL Recognized (E175530) for use in UL Type
3,3R, 4X, 12 and 13 environments
Also meets NEMA 3, 3R, 4X, 12 and
13 requirements
All solid state construction = reliability
Encapsulated for durability and
corrosion resistance
Molded from tough GE Valox
Low power consumption
Installs in 1.125" hole or 3/4" standard K.O.
Comes with gasket installed
PW Series available in Red or Black
PB Series available in Black
Sound output: Varies by model (see chart)
95dB min. @ 2 Feet
103dB min @ 2 Feet
108dB min @ 2 Feet
Resonant frequency 2.9± 0.5kHz
Operating voltage: See Chart
Maximum current draw: See Chart
Operating temperature: -20°C to 50°C
Electrical connections: 1/4" Quick connect
terminals.
Fits panels up to 1/4" thick
Comes with manual volume Damper (removable)
Multitone buzzers have 3 terminals
2.0"
1.350"
Ø 1.125"
Ø 1.421"
Dimension
Cut Out
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Piezo Installation
PANEL MOUNT
LOCKING RING
ENCLOSURE WALL
GASKET
1.105"
PIEZO BUZZER
.657"
.900"
1.350"
1.421"
Piezo Sound Alarm Models
Ingram Part #
PW120A
PW24D
PW12D
PB120AMB-X
PB120AXC-X
PB120AMC-X
PB530ADMC-X
PB330DXCX-X
PB524ADMW-X
PB525DCH-X
PB628DUT-X
PB628DUS-X
PB628DUW-X
PB515DUW/UC-X
PB628DUW/UC-X
PB624ADFB-X
PB120AFB-X
PB120AFS-X
PB630ADFS-X
Voltage
40 to 130 VAC
10 to 28 VDC
4 to 15 VDC
120 VAC
120 VAC
120 VAC
5 to 30 AC/DC
3 to 30 VDC
5 to 24 AC/DC
5 to 25 VDC
6 to 28 VDC
6 to 28 VDC
6 to 28 VDC
5 to 15 VDC
6 to 18 VDC
6 to 24 AC/DC
120 VAC
120 VAC
6 to 30 AC/DC
Current Max
40.0 mA
30.0 mA
30.0 mA
20.0 mA
30.0 mA
30.0 mA
30.0 mA
30.0 mA
25.0 mA
40.0 mA
50.0 mA
50.0 mA
50.0 mA
50.0 mA
50.0 mA
40.0 mA
60.0 mA
40.0 mA
60.0 mA
Tone Type
Warble
Warble
Warble
Medium Loud Beep
Extra Loud Continuous
Medium Loud Continuous
Medium Loud Continuous
Extra Loud Continuous
Medium Loud Warble
Chime
Ultra Loud Staccato
Ultra Loud Siren
Ultra Loud Warble
Ultra Loud Warble or Continuous
Ultra Loud Warble or Continuous
Fast Beep
Fast Beep
Fast Siren
Fast Siren
Output
95dB
95dB
95dB
95dB
103dB
95dB
95dB
103dB
95dB
95dB
108dB
108dB
108dB
108dB
108dB
95dB
95dB
95dB
95dB
UL & Nema Rating
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
3, 3R, 4, 4X, 12 & 13
Also Available:
PS12DWOGD - Same as PW12D but without gasket and damper
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Silence Module
P R O D U C T S, I N C.
5
Silence Module
SM120A
Ratings: 2Amps @
120VAC inductive
Part No.: SM120A, SM24D, SM12D
6
6
REMOTE
SILENCE PB
4
3
PUSH TO
SILENCE
INGRAM
PRODUCTS, INC.
R
SILENCED
JAX, FLORIDA
MODEL: SM120A 120VAC
2
SILENCE MODULE
ALARM POWER
INPUT
1
4ea 1⁄4" fully insulated
connectors included
E175530
The new Ingram patent-pending Silence Module is a simple but clever device. It replaces the silence relay and socket
normally used with audible alarms that require a silence push-button. The main benefits to OEM's are savings in labor,
material and panel space. The Silence Module has an LED located on the back that, when lit, indicates that the alarm has
been silenced. The Silence Module also has a built-in silence push-button that can be accessed from the back of the
module. In addition to the integrated silence push button, the Silence Module has provisions to connect a remote silence
push-button.
The Silence Module is designed for use with, but is not limited to, Ingram Products' Type PW piezo warbler audible alarm.
The Silence Module simply plugs into the back of the piezo warbler as illustrated on the back of this page.
The Silence Module is available for use with 120VAC, 12 and 24VDC alarm power, the same as our piezo warblers. It will
handle inductive and resistive loads up to 2 amps.
Features
Specifications
UL recognized for use in UL508 industrial control
panels. UL File No. E175530.
SM120A rated for use with 120VAC audible alarm.
SM24D rated for use with 24VDC audible alarm.
SM12D rated ro use with 12VDC
Max current: 2 amps
Power consumed: 8.5mA @ 120VAC.
20mA @ 24VDC
33mA @ 12VDC
Operating temp: -30°C to +60°C.
All components are encapsulated for protection.
Electrical connections are 1/4" quick connects for
fast installation.
LED indicates that the Silence Module is in the
silenced condition.
1/4" QUICK
CONNECT
SILENCE PUSH
BUTTON
Easy to understand, install and operate.
Built-in Silence push button accessible from back
of Silence Module.
1.972"
R
Quick-connect terminal available for remote
silence push button.
All models are in stock and ready for same-day
shipment.
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
LED INDICATOR
LIGHT WHEN ALARM
HAS BEEN SILENCED
1.366"
Note: In order to comply with UL requirements use fully
insulated connectors for power and remote silence push button.
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
2.343"
SILENCE MODULE
SM120A, SM24D, SM12D
Silence Module installed
on Ingram Piezo Warbler.
INGRAM PIEZO WARBLER
SILENCE MODULE
5
6
PIN NUMBERS
Silence Module
SM120A
Ratings: 2Amps @
120VAC inductive
1 120VAC 2
Alarm Power Input
BOTTOM
3
4
E175530
Remote Silence
LEFT SIDE
Paten Pending
TOP
RIGHT SIDE
WIRING SCHEMATIC
Max load: 2Amps inductive
Sequence of Operation
When alarm power is applied to Terminal 1 and 2
the buzzer will sound.
When the remote or integral silence push button is
momentarily closed the buzzer will stop and the
LED on the back of the Silence Module will illuminate.
INGRAM
PW BUZZER
When alarm power is removed the silenced LED will
turn off. The silence circuit will be reset and ready
for the next alarm.
High Alarm
L6
N5
4
1L
R
120VAC
Alarm Power
2N
3
Remote silence pushbutton supplied by
customer.
SILENCE
MODULE
CAUTION: OBSERVE POLARITY WHEN PLUGGING IN DC MODULES!
INGRAM
DC Audio Alarm
P R O D U C T S, I N C.
Part No. Sounder31: AH03127-S
The Sounder31 siren was designed for
use in industrial control systems as well
as for use in fire alarm and security
systems.
Features
31 tones selectable by dip switch
Weather proof
High sound output
Variable output
Low current consumption
12/24 VDC operation auto select
no adjustment required
Two sets of In and out terminals
for parallel operation
Multiple mounting methods
Easy one hole mounting - 1/2" KO or 7/8" hole
Add 8-32 screw to make unit tamper proof
Supplied with UL Listed cord grip that
accepts wire from 1/8" - 3/16" OD
Technical Specifications
Voltage: 12~24 VDC
Current Draw: 34mA max
Vertical mounting not recommended
for outdoor use
Do not use two knock outs in front of unit
knock out and insert
8-32 screw through
panel to make unit
tamper proof
Bottom View
3/4"
3 7/8"
3 5/8"
Do not use
3 5/8"
3 7/8"
gasket
3/4"
Cord Grip
Gasket
Enclosure Wall
Cord Grip
Enclosure Wall
Mounting for Indoor Use
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
Do not use
Mounting for Outdoor Use
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Technical Data for AHM Series Alarms
Switch
Positon Tones
Output Current
(dB) (mA)
Alternating Tones 800/970 Hz at 2Hz
101
15.1
Sweeping 800/970Hz at 7Hz
100
16.1
Sweeping 800/970Hz at 1Hz
110
14.5
Continuous at 2850Hz
110
37.4
Sweeping 2400-2850Hz at 7Hz
109
25.4
Sweeping 2400-2850Hz at 1Hz
112
24.2
Slow Whoop
101
14.7
Sweep 1200 - 500Hz at 1Hz
100
15.7
Alternating Tones 2400/2850Hz at 2Hz
112
26.4
Intermittent Tones of 970 Hz at 1Hz
102
13.0
Alternating Tones 800/970Hz at 1Hz
103
16.2
Intermittent Tones of 2850Hz for 400ms
114
13.7
98
13.0
106
19.9
554 Hz for 100ms and 440Hz for 400ms
97
14.5
Intermittent 660Hz 150ms on / 150ms off
93
14.7
Intermittent 600Hz 1.8 sec. on / 1.8 sec. off
96
12.5
Intermittent 600Hz 6.5 sec. on / 13 sec. off
96
12.9
Continuous 660Hz
95
15.0
100
14.7
95
13.1
111
16.1
98
17.7
Sweep 2400 - 2850Hz 500ms on / 500ms off
109
33.7
Intermittent 970Hz 500ms on 500ms off
102
13.0
Intermittent 2850Gz 500ms on 250ms off
114
13.5
Continuous at 4kHz
108
26.5
Intermittent 400Hz 500ms on / 250ms off
98
14.2
Intermittent 400Hz 500ms on / 250ms off
95
13.5
Sweeping 320 / 480Hz at 40Hz
95
14.0
108
14.0
970Hz at 1/4 sec. On, 1 sec. Off
Continuous at 970Hz
Alternating 554 / 440Hz at 1Hz
Intermittent 660Hz at 1Hz
Intermittent 2850Hz 500ms on / 500ms off
Sweep 800- 970Hz at 50Hz
Intermittent 2kHz 200ms on / 500ms off
INGRAM
DC Audio Alarm & Beacon
P R O D U C T S, I N C.
Part No. Sounder31: AH03127-BS
The Sounder31 siren with LED was
designed for use in industrial control
systems as well as for use in fire alarm
and security systems. The combination
audio and visual is particularly useful in
areas with high ambient noise levels
where an audible signal may not be
heard.
Features
31 tones selectable by dip switch
Weather proof
High sound output
Variable output
Low current consumption
12/24 VDC auto select
High efficiency lens for maximum
light output
High Reliability LED Light Source
Two sets of in and out terminals for
parallel operation
Multiple mounting methods
Easy one hole mounting - 1/2" KO or 7/8" hole
Add 8-32 screw to make unit tamper proof
Supplied with UL Listed cord grip that
accepts wire from 1/8" - 3/16" OD
Technical Specifications
Voltage: 12~24 VDC
Current Draw: 34mA max
Vertical Mounting not recommended
for outdoor use
Do not use two knock outs in front of unit
knock out and insert
8-32 screw through
panel to make unit
tamper proof
Bottom View
Flashing
Beacon
3 7/8"
3/4"
4 3/8"
Do not use
Do not use
4 3/8"
3 7/8"
Gasket
3/4"
Cord Grip
Gasket
Enclosure wall
Cord Grip
Enclosure Wall
Mounting for Indoor Use
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
888-875-2221 ph
Flashing
Beacon
Mounting for Outdoor Use
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Technical Data for AHM Series Alarms
Switch
Positon Tones
Output Current
(dB) (mA)
Alternating Tones 800/970 Hz at 2Hz
101
15.1
Sweeping 800/970Hz at 7Hz
100
16.1
Sweeping 800/970Hz at 1Hz
110
14.5
Continuous at 2850Hz
110
37.4
Sweeping 2400-2850Hz at 7Hz
109
25.4
Sweeping 2400-2850Hz at 1Hz
112
24.2
Slow Whoop
101
14.7
Sweep 1200 - 500Hz at 1Hz
100
15.7
Alternating Tones 2400/2850Hz at 2Hz
112
26.4
Intermittent Tones of 970 Hz at 1Hz
102
13.0
Alternating Tones 800/970Hz at 1Hz
103
16.2
Intermittent Tones of 2850Hz for 400ms
114
13.7
98
13.0
106
19.9
554 Hz for 100ms and 440Hz for 400ms
97
14.5
Intermittent 660Hz 150ms on / 150ms off
93
14.7
Intermittent 600Hz 1.8 sec. on / 1.8 sec. off
96
12.5
Intermittent 600Hz 6.5 sec. on / 13 sec. off
96
12.9
Continuous 660Hz
95
15.0
100
14.7
95
13.1
111
16.1
98
17.7
Sweep 2400 - 2850Hz 500ms on / 500ms off
109
33.7
Intermittent 970Hz 500ms on 500ms off
102
13.0
Intermittent 2850Gz 500ms on 250ms off
114
13.5
Continuous at 4kHz
108
26.5
Intermittent 400Hz 500ms on / 250ms off
98
14.2
Intermittent 400Hz 500ms on / 250ms off
95
13.5
Sweeping 320 / 480Hz at 40Hz
95
14.0
108
14.0
970Hz at 1/4 sec. On, 1 sec. Off
Continuous at 970Hz
Alternating 554 / 440Hz at 1Hz
Intermittent 660Hz at 1Hz
Intermittent 2850Hz 500ms on / 500ms off
Sweep 800- 970Hz at 50Hz
Intermittent 2kHz 200ms on / 500ms off
The Sounder 120 VAC Alarm
Part No. AH115A8R & AH115A8G
The Ingram 120 VAC Sounder is NEMA and
UL Type 4X alarm horn suitable for heavy duty
applications inside and outdoors. This horn
features 8 user selectable alert sounds. Add
quality to your control panel with the Ingram
Sounder.
Designed for use with Ingram's Silence Module
Features
UL listed (E175530) for use in NEMA and UL
Type 3, 3R, 4, 4X, 12 and 13
Loud: 110+ decibels at 5 feet
8 user selectable alert sounds
2 user selectable sound output levels
Low profile protrudes less than 1" from
mounting surface
Does not generate electrical noise
due to piezo electronic sound element
Self locking stainless steel hex nuts makes it
tamper resistant
Highly reliable solid state circuitry
Technical Specifications
Voltage: AH115A8R, AH115A8G - 115 VAC
Average current draw: 50 mA @ 120 VAC
Ambient operating temperature: -40°F - 151°F
Maximum humidity of 98% RH+2%
Each wire screw clamp terminal will accept two
#18AWG - #12AWG wires.
3 year warranty
Available in red or gray
2.142"
4.086"
.125"
Ø .25"
3.375"
3.403"
Ø 3.539"
3" KNOCK OUT
Ø .25"
3.375"
3.375"
3.375"
.765"
3.375"
1.252"
Hole Pattern for Mounting
! WARNING: Do not operate this device within 15 inches of a person's ear. Exposure to such
high sound level can result in permanent damage to a persons hearing.
8725 Youngerman Court Suite 206 Jacksonville, FL 32257
888-875-2221 ph
(904)778-1010 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Assembly
To Set Desired DBA Sound Output Level:
To Set Desired Alarm tone:
Horn
March Time Horn
High Level Output (factory settings)
Bell
Code 3 Horn
Standard Level Output
Siren
Code 3 Tone
Hi/Lo
Slow Whoop
SWITCH SETTING
Note: The code-3 Horn and Tone alert sounds are reserved for emergency evacuation signaling.
They should not be used for any other purpose!
INGRAM
The Sounder 12/24 VDC Alarm
P R O D U C T S, I N C.
Part No. AH1224D8G (gray), AH1224D8R (red)
The Ingram AH1224D8G and AH1224D8R are
NEMA and UL Type 4X alarm horn suitable for
heavy duty applications inside and outdoors.
This horn features 8 user selectable alert
sounds and can be used with 12 or 24 Volts
DC. Add quality to your control panel with the
Ingram Sounder.
Designed for use with Ingram's Silence Module
Features
UL listed (E175530) for use in NEMA
and UL Type 3, 3R, 4, 4X, 12 and 13
Loud: 110+ decibels at 5 feet
8 user selectable alert sounds
2 user selectable sound output levels
Low profile protrudes less than 1"
from mounting surface
Does not generate electrical noise
due to piezo electronic sound element
Self locking stainless steel hex nuts
makes it tamper resistant
Highly reliable solid state circuitry
Technical Specifications
Voltage: 12/24 VDC
Average current draw: 167mA @ 12VDC
108 mA @ 24VDC
Ambient operating temperature: -40°F - 151°F
Maximum humidity of 98% RH+2%
Each wire screw clamp terminal will accept two
#18AWG - #12AWG wires.
3 year warranty
Available in Red or Gray
2.142"
4.086"
.125"
Ø .25"
3.375"
3.403"
Ø 3.539"
3" KNOCK OUT
Ø .25"
3.375"
3.375"
3.375"
.765"
3.375"
1.252"
Hole Pattern for Mounting
! WARNING: Do not operate this device within 15 inches of a person's ear. Exposure to such
high sound level can result in permanent damage to a persons hearing.
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Assembly
To Set Desired DBA Sound Output Level:
High Level Output (factory settings)
Set Switch 1 To On Position
Standard Level Output
Set Switch 1 To Off Position
To Set Desired Alarm tone:
Horn
March Time Horn
Bell
Code 3 Horn
Siren
Code 3 Tone
Hi/Lo
Slow Whoop
Jumper Settings To Select 12 or 24 VDC
12
12
12 VDC
24
24VDC
24
Note: The code-3 Horn and Tone alert sounds are reserved for emergency evacuation signaling.
They should not be used for any other purpose!
INGRAM
AC-DC Power Supply
P R O D U C T S, I N C.
Part No. See Chart
Features
*UL 508 Listed
*UL Class 2 output
*Potentiometer for volt adjustment
*Only 7/8 inch wide
*AC/DC Power module
*Small footprint
*High efficiency - up to 77%
Old
Model No.
New
Input Voltage
Model No.
PSD05-05
PSD05-12
PSD05-15
PSD05-24
PSD10-05
PSD10-12
PSD10-15
PSD18-05
PSD18-12
PSD18-15
PSD18-24
PSD05-05
PSD05-12
PSD05-15
PSD05-24
PSD10-05
PSD10-12
PSD10-15
PSD18-05
PSD18-12
PSD18-15
PSD18-24
*Automatic short circuit protection
*Automatic overload protection
*Internal input filter
*Power Rdy: output on 24VDC models
*Red LED: DC low indicator
*Din rail mounting clip included
Output
Wattage
Single Output Models
85~264 VAC
5 WATTS
5 WATTS
85~264 VAC
5 WATTS
85~264 VAC
5 WATTS
85~264 VAC
85~264 VAC 10 WATTS
85~264 VAC 10 WATTS
85~264 VAC 10 WATTS
85~264 VAC 15 WATTS
85~264 VAC 18 WATTS
85~264 VAC 18 WATTS
85~264 VAC 18 WATTS
Output
Voltage
Output
Current
Eff.
(Typ.)
5 VDC
12 VDC
15 VDC
24 VDC
5 VDC
12 VDC
15 VDC
5 VDC
12 VDC
15 VDC
24 VDC
1.00 Amp
.42 Amps
.34 Amps
.21 Amps
2.00 Amps
.84 Amps
.67 Amps
3.00 Amps
1.50 Amps
1.20 Amps
.75 Amps
68%
72%
72%
72%
72%
74%
75%
72%
74%
75%
77%
Specifications
*S
Switching frequency: > 100kHz
*Isolation voltage: 3,000VAC
*Isolation resistance: 100M (min.)
*Operating ambient temperature: -10° to +50°C
*Storage temperature: -25° to +85°C
*Relative humidity: 20% to 95% RH
*Cooling: free air convection
*Transient recovery time:
DRA05 Series - 300 seconds
DRA10 Series - 500 seconds
DRA18 Series - 1000 seconds
All - 50% load step change
*Temperature coefficient: 0.02% °C
*Dimension: 4.53 x 3.60 x 0.87in (115 x 90 x 22.5mm)
*Approvals:
: UL508 Listed, UL1950, UL1310
UL File No. E196362, E231718
TUV: EN60950
CE: EN50081-1 / EN55022 for EMI
EN50082-1 / EN55024 for EMS
FCC: Class B
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Input
*Input voltage range / frequency:
85 ~ 264 VAC / 47 ~ 63 Hz
*Max. Input voltage: 265 VAC
*Inrush current: <10A @ 110VAC
<18A @ 230 VAC
*Input fuse: T2A / 250 VAC
Output
*Output voltage accuracy: ±1% @ Vo_nom
*Output overload: 110~135%
*Line regulation: ±1% @ Vo_nom
*Load regulation: ±2% @ Vo_nom
*Ripple & noise: 100mV (max.)
*Efficiency: up to 77%, see model list
*Case material: plastic
*DC ok indicator: green LED
*DC low indicator: red LED
Website:www.ingramproducts.com
e-mail: [email protected]
[22.2mm]
0.87"
2 1
1.575"
V- V+
DC Output
LO
ON
[90mm]
3.600"
Vout ADJ.
Ø .205"
1.000"
N L
345
35mm Din Rail
4.540"
[113.6mm]
PIN ASSIGNMENT
IN
OUT
Designation
V+
V-
OTHER
PIN NO.
1
2
3
4
5
N
L
ON
LO
Vout Adj.
Description
Positive output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (neutral conductor, no polarity at DC input)
Input terminals (phase conductor, no polarity at DC input)
Operation indicator LED
DC LOW indicator LED
Adjustable -10 to +15%
CONSTRUCTION
Enclosed plastic housing with fine
ventilation grid. Easy snap-on mounting
onto the 35mm DIN-Rail. Unit sits safely
and firmly on the rail; no tools required
even to remove.
INSTALLATION
Ventilation / Cooling: Normal convection
above/below 25mm free space for cooling
recommended.
Connector size range: solid : 0.2-2.0mm
(AWG24-14)
DERATING
Power Out (%)
100
60
40
%
-10
0
40
50
Temp (°C)
70
80
INGRAM
AC-DC Power Supply
P R O D U C T S, I N C.
Part No.: See Chart
Features
*UL 508 certified
*UL Class 2 output*
*Potentiometer for volt adjustment
*AC/DC Power module
*Small footprint
*High efficiency - up to 85%
Old
Model No.
New
Model No.
Input Voltage
PSD30-05
PSD30-12
PSD30-24
PSD30-48
PSD60-05*
PSD60-12*
PSD60-24*
PSD60-48*
DRA30-05
DRA30-12
DRA30-24
DRA30-48
DRA60-05*
DRA60-12*
DRA60-24*
DRA60-48*
85~264 VAC
85~264 VAC
85~264 VAC
85~264 VAC
85~264 VAC
85~264 VAC
85~264 VAC
85~264 VAC
*Power Rdy: output on 24VDC models
*Automatic short circuit protection
*Automatic overload protection
*Internal input filter
*Din rail mounting clip included
Output
Wattage
Output
Voltage
Output
Current
Eff.
(Typ.)
Single Output Models
30 Watts
30 Watts
30 Watts
30 Watts
50 Watts
60 Watts
60 Watts
60 Watts
5 VDC 6.00 Amps 79%
12 VDC 2.50 Amps 81%
24 VDC 1.25 Amps 84%
48 VDC .625 Amps 83%
5 VDC 10.00 Amps 80%
12 VDC 5.00 Amps 84%
24 VDC 2.50 Amps 86%
48 VDC 1.25 Amps 86%
* Output not UL Class 2 on model DRA60-05A
Specifications
*S
Switching frequency: > 55kHz
*Isolation voltage: 3,000VAC
*Isolation resistance: 100M (min.)
*Operating ambient temperature: 50°C
*Storage temperature: -25° to +85°C
*Max. case temperature: 65°C
*Relative humidity: 9O% RH
*Cooling: free air convection
*Transient recovery time: 300 seconds,
50% load step change
*Temperature coefficient: 0.02% / °C
*Dimension: 4.53 x 3.54 x 1.59 in (115 x 90 x 40.5mm)
UL508 Certified UL 1950, UL1310
*Approvals:
UL File No. E196362, E190717
CE: EN550022 for EMI
EN55024 for EMS
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Input
*Input voltage range / frequency:
85 ~ 264VAC / 47 ~ 63Hz
*No load input current: 10mA
*Max. Input voltage: 265VAC
*Inrush current: <21 A @ 115VAC
<42 A @ 230VAC
Input fuse: T2A / 250VAC
Output
*Output voltage accuracy: ±1% @ Vo_nom
*Output overload: 105~125%
*Line regulation: ±0.2% @ Vo_nom
*Load regulation: ±0.3% @ Vo_nom
*Ripple & noise: 50mV (max.) @ full load
*Efficiency: up to 86%, see model list
*Case material: plastic
*DC ok indicator: green LED
Website:www.ingramproducts.com
e-mail: [email protected]
[40.5mm]
1.620"
5
1
fig. 1
Rdy connection
[90mm]
3.600"
A) Relay
Vout ADJ.
+Vout
B) 5V single
RL >700
Rdy
N
L
-Vout
6
8
4.540"
[113.6mm]
PIN ASSIGNMENT
Description
DC OK output for relay ( not connect except 24V model)
Positive output terminal
Positive output terminal
OUT
Designation
RDY
+
+
-
IN
Negative output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (neutral conductor, no polarity at DC input)
Input terminals (phase conductor, no polarity at DC input
N
L
OTHER
PIN NO.
1
2
3
4
5
6
7
8
Vout Adj.
Adjustable -10 to +15%
DC OK
Operation indicator LED
CONSTRUCTION
Enclosed plastic housing with fine
ventilation grid. Easy snap-on mounting
onto the 35mm DIN-Rail. Unit sits safely
and firmly on the rail; no tools required
even to remove.
INSTALLATION
Ventilation / Cooling: Normal convection
above/below 25mm free space for cooling
recommended.
Connector size range: solid : 0.2-2.0mm
(AWG24-14)
DERATING
Power Out (%)
100
60
40
%
-10
0
40
50
Temp (°C)
70
80
AC-DC Power Supply
Features
*UL 508 certified
*Potentiometer for volt adjustment
*AC/DC Power module
*Power Rdy output contact on
24 volt models
*Internal input filter
Old Model No.
New Model No.
Input Voltage
*Automatic short circuit protection
*Automatic overload protection
*Small footprint
*High efficiency - up to 86%
*Din rail mounting clip included
Output
Wattage
Output
Voltage
Output
Current
Eff.
Eff.
(Typ.) (Min.)
Single Output Models
PSD120-12SPA DRA120-12SPA 115~230 VAC 120 Watts 12 VDC 10.00 Amps 84%
PSD120-24SPA DRA120-24SSA 115~230 VAC 120 Watts 12 VDC 5.00 Amps 86%
Specifications
*S
Switching frequency: > 80kHz
*Isolation voltage: 3,000VAC
*Isolation resistance: 100M (min.)
*Operating ambient temperature: -10° to +50°C
*Storage temperature: -25° to +80°C
*Max. case temperature: 65°C
*Relative humidity: 20% to 9O% RH
*Cooling: free air convection
*Transient recovery time: 300 seconds,
50% load step change
*Temperature coefficient: +0.02% / °C
*Dimension: 4.9 x 2.5 x 5 in (125 x 63.5 x 126mm)
*Approvals:
: UL508 Certified UL 1950
UL File No. E196362
CE: EN50081-1
EN50082-2
EN61000-4-X where x may be 3,4,5,6,8
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
82%
84%
Input
*Input voltage range / frequency:
115 ~ 230VAC / 47 ~ 63Hz
*Input voltage: switch selectable
115VAC: 93VAC min. 132VAC max
230VAC: 186VAC min. 264VAC max
*Inrush current: <24 A @ 115VAC
<48 A @ 230VAC
Input fuse: T4A / 250VAC
Output
*Output voltage accuracy: ±1% @ Vo_nom
*Output overload: 105~125%
*Line regulation: ±0.5% @ Vo_nom
*Load regulation: ±1% @ Vo_nom
*Ripple & noise: 50mV (max.) @ full load
*Efficiency: up to 86%, see model list
*Case material: metal
*DC on indicator: green LED
*DC low indicator: red LED
Website:www.ingramproducts.com
e-mail: [email protected]
4.960"
6
1
- - ++
Rdy
Vout ADJ.
D C LO
DC ON
BAUART
GEPRUFT
TUV
Rheinland
Product Safety
5.180"
TYPE
APPROVED
E196362
2JF4
115VAC
230VAC
PSD120
INGRAM
PRODUCTS, INC.
L
7
N
9
2.485"
PIN ASSIGNMENT
OUT
Designation
RDY
Description
DC ON output for relay
Do not connect except 24V model
Positive output terminal
Positive output terminal
Negative output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (phase conductor, no polarity at DC input
Input terminals (neutral conductor, no polarity at DC input)
Operation indicator LED
+
+
-
IN
-
OTHER
PIN NO.
1
2
3
4
5
6
7
8
9
L
N
DC ON
DC LO
Vout Adj.
115/230
DC LOW voltage indicator LED
12SPA 11.4 - 14.5 VDC 24SPA 22.5 - 30VDC
Input voltage selection switch
CONSTRUCTION
Enclosed metal housing with fine
ventilation grid. Easy snap-on mounting
onto the 35mm DIN-Rail. Unit sits safely
and firmly on the rail; no tools required
even to remove.
INSTALLATION
Ventilation / Cooling: Normal convection
above/below 25mm free space for cooling
recommended.
Connector size range: solid : 10-24AWG
Power Out (%)
DERATING
100
70
0
-10
0
40
Temp (°C)
50
71
INGRAM
AC-DC Power Supply
P R O D U C T S, I N C.
Part No.: See Chart
Features
*UL 508 certified
*Potentiometer for volt adjustment
*AC/DC Power module
*Power Rdy output contact on
24 volt models
*Internal input filter
Old Model No.
PSD240-24
PSD240-24B
PSD240-48A
PSD240-48B
*Automatic short circuit protection
*Automatic overload protection
*Small footprint
*High efficiency - up to 89%
*Din rail mounting clip included
New Model No. Input Voltage
DRA240-24A
Discontinued
Discontinued
Discontinued
Output
Wattage
Single Output Models
115~230 VAC 240 Watts
115~230 VAC 240 Watts
115~230 VAC 240 Watts
115~230 VAC 240 Watts
Output
Voltage
Output
Current
24 VDC 10.00 Amps
24 VDC 10.00 Amps
48 VDC 5.00 Amps
48 VDC 5.00 Amps
Specifications
*IIsolation voltage: 3,000VAC
*Isolation resistance: 100M (min.)
*Operating ambient temperature: -10° to +50°C
*Storage temperature: -25° to +85°C
*Max. case temperature: 65°C
*Relative humidity: 20% to 9O% RH
*Cooling: free air convection
*Transient recovery time: 300 seconds,
50% load step change
*Temperature coefficient: +0.03% / °C
*Dimension: 4.9 x 3.3 x 5 in (125 x 83 x 126mm)
: UL508 Listed
*Approvals:
UL File No. E196362
CE: EN61000-6-3
EN61000-6-2
EN61000-4-X where x may be 3,4,5,6,11
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
Eff.
Eff.
(Typ.) (Min.)
(904)778-2444 fax
89%
89%
90%
90%
87%
87%
88%
88%
Input
*Input voltage range / frequency:
115 ~ 230VAC / 47 ~ 63Hz
*Input voltage: Auto select
115VAC: 93VAC min. 132VAC max
230VAC: 186VAC min. 264VAC max
*Inrush current: <24 A @ 115VAC
<48 A @ 230VAC
Input fuse: T6.3A / 250VAC internal
Output
*Output voltage accuracy: ±1% @ Vo_nom
*Output overload: 105~145%
*Line regulation: ±0.5% @ Vo_nom
*Load regulation: ±1% @ Vo_nom
*Ripple & noise: 100mV (max.) @ full load
*Efficiency: up to 90%, see model list
*Case material: metal
*DC on indicator: green LED
*DC low indicator: red LED
Website:www.ingramproducts.com
e-mail: [email protected]
4.960"
6
S
P
1
- - ++
Rdy
Vout ADJ.
D C LO
DC ON
BAUART
GEPRUFT
TUV
Rheinland
Product Safety
TYPE
APPROVED
E196362
2JF4
5.180"
PSD240
INGRAM
PRODUCTS, INC.
L
7
N
9
3.270"
PIN ASSIGNMENT
OUT
Designation
RDY
Description
A normal open relay contact for DC ON level control
Do not connect except 24V model
Positive output terminal
Positive output terminal
Negative output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (phase conductor, no polarity at DC input
Input terminals (neutral conductor, no polarity at DC input)
Operation indicator LED
V+
V+
V-
IN
V-
OTHER
PIN NO.
1
2
3
4
5
6
7
8
9
L
N
DC ON
DC LO
Vout Adj.
S/P
DC LOW voltage indicator LED
Trimmer-potentiometer for Vout adjustment
Single / Parallel select switch
CONSTRUCTION
Enclosed metal housing with fine
ventilation grid. Easy snap-on mounting
onto the 35mm DIN-Rail. Unit sits safely
and firmly on the rail; no tools required
even to remove.
INSTALLATION
Ventilation / Cooling: Normal convection
above/below 25mm free space for cooling
recommended.
Connector size range: solid : 10-24AWG
Power Out (%)
DERATING
100
70
0
-10
0
40
Temp (°C)
50
71
INGRAM
UL Class 2 Transformer
P R O D U C T S, I N C.
Part No. 50313OF-12
The Ingram UL Class 2 Transformer is a
multi-tapped primary, dual winding secondary
transformer allowing operation at 3 input and
two output voltages. It employs PTC (positive
temperature coeffient) auto resettable fuse
technology to protect it from overload
conditions. The PTC device effectively opens
during the overload, then resets after the
undesirable condition has been removed.
These transformers are indespensible
wherever low voltage supplies are needed.
Features
Operates at one of three input voltages: 115,
208, or 230VAC
Two configurable output voltages: 12 and 24VAC
PTC (Auto resetting fuse) protects transformer
from damaging overload currents
Technical Specifications
Input voltages:
115/208/230 VAC
Output voltages:
12 or 24VAC @ 50VA
Max current output:
2.083A @ 24VAC
4.167A @ 12VAC
Max. operating temp: 50˚C (ambient)
Weight:
1.8 lbs.
Laminated ferrite core
3 1/8"
Ø 3/16"
PTC DEVICE
CONNECTED in
SERIES with
PRIMARY COMMON
1 7/8"
3 1/2"
TOP
2 1/4"
1 1/8"
2 5/8"
2 1/4"
PTC DEVICE
CONNECTED in
SERIES with
PRIMARY COMMON
1 1/2"
FRONT
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
R. SIDE
888-875-2221 ph
230V
ORG.
YEL./WHT.
208V
RED
BLK./WHT.
12VAC
115V N
WHT.
YEL.
COM
BLK.
BLK.
SERIES
OUTPUT 24VAC @ 2.083 AMPS
12VAC
230V
ORG.
YEL./WHT.
208V
RED
BLK./WHT.
12VAC
115V N
WHT.
YEL.
COM
BLK.
BLK.
PARALLEL
OUTPUT 12VAC @ 4.167 AMPS
12VAC
50VA TRANSFORMER INPUT/OUTPUT CONFIGURATION
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
5Ah Battery w/Charger
P R O D U C T S, I N C.
Part No. BB-1205AH
Ingram has the battery and charger you need for your
battery backup application. This 12 volt dc, 5 Amp-hour
battery will deliver the juice to keep your 12V system
operating in the event of a power outage. It comes with
a 12 Vdc charger to quickly recharge the battery or to
maintain a float charge as needed.
Battery sold separately as B-1208AH.
12VDC charger sold separately as FLC-2207.
24VDC charger sold separately as FLC-2210.
Features
Technical Specifications
Sealed lead acid design
12 Volts DC
Constant voltage charge (at 25 C)
5 Amp-Hours Capacity
Quick connect or solder terminals
Size: 4.0" High x 3.5" Wide x 2.75" Deep
Two year warranty
UL Recognized
Comes with UL Listed FLC-2207 12Vdc charger.
8Ah Battery w/Charger
Part No. BB-1208AH
If you need a battery with even more staying power,
check out Ingram's 12 volt dc, 8 Amp-hour battery and
charger. Comes with our 12 Vdc charger to quickly
recharge the battery or to maintain a float charge as
needed. For greater voltage or current capabilities, see
the figure below.
Battery sold separately as B-1208AH.
12VDC charger sold separately as FLC-2207.
24VDC charger sold separately as FLC-2210.
Features
Technical Specifications
Sealed lead acid design
12 Volts DC
Constant voltage charge (at 25 C)
8 Amp-Hours Capacity
Quick connect or solder terminals
Size: 3.75" High x 6.0" Wide x 2.5" Deep
Two year warranty
UL Recognized
Comes with UL Listed FLC-2207 12Vdc charger.
12 Volts
16Ah
24 Volts
8Ah
+
12V 8Ah
Battery
+
12V 8Ah
Battery
+
12V 8Ah
Battery
Batteries in Series
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
+
12V 8Ah
Battery
Batteries in Parallel
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
5Ah Battery Mounting Bracket
P R O D U C T S, I N C.
Part No.: MB1205AH
Top
Slot For Nylon Ty-wrap
For Use During Shipping
2.982"
Front
Back
Side
0.627"
1.248"
1.665"
3.335"
1.127"
Ø 0.218"
Clearance Holes
For 8-32 Pan Head
Screws
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
Ø 0.312"
Clearance Holes
For Screwdriver
888-875-2221 ph
(904)778-2444 fax
3.815"
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
5Ah Battery w/Charger
P R O D U C T S, I N C.
Part No. B-1205AH
Features
Technical Specifications
Compact size
Sealed lead acid battery
Optional aluminum mounting bracket
Quick connect or solderless terminals
Two year warranty
12 Volt
5 Amp-hours
UL Recognized
CE approved
4"H x 3.5"W x 2.75"D
8Ah Battery w/Charger
Part No. B-1208AH
Features
Technical Specifications
Compact size
Sealed lead acid battery
Quick connect or solderless terminals
Two year warranty
12 Volt
8 Amp-hours
UL Recognized
CE approved
3.75"H x 6.0"W x 2.5"D
12V Charger
Part No. FLC-2207
Features
Technical Specifications
Built-in, 120VAC polarized wall plug.
Designed with safety in mind, including
overcurrent protection and reversed
polarity output protection.
Bright LEDs indicate charging states:
Fast Charge or Float/Power On.
Comes with molded alligator clip power
output cable. Easy screw/spade hookup.
UL listed, FCC tested, CE registered.
Output voltage range: 10-15Vdc
Output current: [email protected]
Maximum output power: 14.5W
Fast charge current: 1A
Fast charge voltage: 14.7Vdc
Float charge voltage: 13.65
Light switching current: 160mA
Efficiency: 68%
24V Charger
Part No. FLC-2210
Features
Technical Specifications
Same as above, except designed to
operate at 24VDC.
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Output voltage range: 20-30Vdc
Output current: [email protected]
Maximum output power: 14.2W
Fast charge current: 500mA
Fast charge voltage: 29.4Vdc
Float charge voltage: 27.3Vdc
Light switching current: 85mA
Efficiency: 68%
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Thermostat
P R O D U C T S, I N C.
Part No. CTS, HTS
The Ingram CTS and HTS thermostats are designed
to regulate and monitor air temperature. Use the HTS
(heating thermostat) for panels designed with heaters.
It closes as temperature drops. Use the CTS (cooling
thermostat) for panels designed with fans, ventilators
or air conditioner. It closes as temperature rises.
Using the Ingram CTS and HTS is an easy and low
cost way to maintaining operating temperatures in
enclosures.
Features
Small Size
Easy 35mm din rail mounting
Wide setting range
Model CTS (cooling thermostat)
Model HTS (heating thermostat)
Heating thermostat closes as
temperature decreases
Cooling thermostat closes as
temperature increase
Technical Specifications
Sensor Type: Bimetal
Mount: Din Rail
Switching Capacity: 250 VAC 10A resistive
120 VAC 15A resistive
Set Range: 0°C (32°F) to 60°C (140°F)
Connections: 2-pole terminal for AWG 14 max
Housing: GE Lexan
Weight: 40g
Protection Type: Touch Safe
Approvals: US UL Recognized
Canadian UL Recognized
E258620
1.675"
1.334"
F
70
1.291"
90
110
50
30
130
140
2.370"
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)733-2230 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Thermostat Installation Instructions
PRESS
1
2
F
70
90
110
50
130
140
Thermostat Removal Instructions
PRESS
30
PULL
INGRAM
Anti-Condensation Heater
P R O D U C T S, I N C.
Models: AHC-15W, AHC-30W, AHC-35W, AHC-50W
The "AHC" touch safe series anti-condensation
space heater is designed to keep the
temperature inside of an enclosure several
degrees above the external ambient
temperature and above the dew point. Keep
your electrical equipment on line by preventing
corrosion due to condensation. Contact our
engineering department for specifications for
the proper AHC model used in other types of
enclosures (Aluminum, Fiberglass, etc.).
Features
Technical Specifications
There are no moving parts
No thermostat to set or malfunction
No adjustments are needed for ambient
temperature changes
Easy to install (connect two wires and
insert two mounting screws)
Compact size
UL Recognized (E121431)
Due to heat sink design, the max external
surface temperature are "Touch Safe"
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
Operating temperatures: -30˚C to 60˚C
Watts: 15, 30, 35 or 50 per unit, depending
on model
Extruded black anodized aluminum
Life expectancy-20 years
Rated 120 VAC, output will vary with
AC or DC voltage
When possible, two smaller units are more
efficient than one larger unit
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
4.0"
4.500"
60"
3.15"
48"
10"
.324"
Ø .218"
3.365"
MODEL SELECTION
Fig. 1
0.7 watt of power per square foot is necessary to generate enough energy to raise the
temperature of an enclosure 1˚F in a metallic enclosure. To prevent condensation, the
enclosure should be 2˚ to 3˚F above the ambient air temperature. To determine total watts
needed, it is first necessary to determine the total surface area of the enclosure, multiply by
the amount of power needed to raise the temperature 1˚F (0.7W/ft ) and then multiple by a
factor equal to the number of degrees you wish to be above ambient. You can then use this
total wattage to determine which model(s) you will need to obtain sufficient heating power.
See example below.
Example: 60" x 48" x 10" metal enclosure (see Fig. 1)
To Determine Square Feet
2
Step 1: 60 x 48 = 2880 in. Front and back of box = 2880 x 2 = 5760
2
60 x 10 = 600 in. Top and bottom of box = 600 x 2 = 1200
48 x 10 = 480 in.2 Left & right sides of box = 480 x 2 = 960
7920 in. = Total area
Step 2:
Convert square inches to square feet: 7920 / 144 = 55 Square Feet
Step 3:
Multiply total square feet by 0.7 55 x 0.7 = 38.5W to raise temperature 1˚F.
Step 4:
Multiply by degree increase desired. 38.5W x 2 degrees = 77W; x 3 degrees = 115.5W
So, 77 to 116 watts would be needed. (80 to 120W is a good ball park estimate.)
Recommendation: The median power of this temperature range is 96 watts, so use two AHC 50W units.
Note: For non-metallic enclosures derate by around 50%. For above example, 40 - 60 watts is fine.
INGRAM
Mini Space Heater/Condensation Heater
P R O D U C T S, I N C.
Part No.: MHS-15
The mini space heater is designed for interior
enclosure where space is at a minimum, and a
limited amount of heat is required. Use it to keep
the temperature inside an enclosure several
degrees above the external ambient temperature
and above the dew point. Keep your electrical
equipment on line by preventing corrosion due to
condensation. Contact our engineering department
for specifications for the proper AHC or MHS model
used in other types of enclosures (Aluminum,
Fiberglass, etc.).
Features
Technical Specifications
There are no moving parts
No thermostat to set or malfunction
No adjustments are needed for ambient
temperature changes
Easy to install (connect two wires and
insert two mounting screws)
Compact size
Made of heavy extruded irradited aluminum
Operating temperatures: -30AC to 60AC
Watts: 15 Watts @ 120VAC
Life expectancy 10 years
Installation
1. Mount on steel or aluminum surface.
2. Unit should be mounted in vertical position about
25% off the bottom of the enclosure
3. Attach 120 VAC power to unit.
2 3/8"
@ 1/4"
@ 1/8"
1 1/8"
1 3/4"
2 3/8"
1 1/2"
3/16" fully insulated UL Listed or
Certified quick connects. Suitable
for use with #14 to #16 AWG wire.
2 5/8"
3 3/4"
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
TUF Pump II
P R O D U C T S, I N C.
Part No. BASCR30
Introducing Ingram's new bubbler system air supply.
The TUF Pump II contains everything you need in
an air supply for 0 to 10, 20, and 30 ft bubbler type
level control. Simply adjust in the field for the level
you need, following the instructions printed on the
unit.
Features
Oil-less, non-lube die cast aluminum pump*
with thermal protection and built-in unloader
Pressure gauge
Adjustable flowmeter
User adjustable for 0 to 10/20/30 ft. liquid levels
Cooling fan for hot environments
Comes with pre-assembled check valve,
intake air filter, tees and barbed fittings
All components mounted to sturdy brushed
aluminum frame
Comes with rubber feet for mounting on flat
surfaces or can be fastened to panel with four
#8-32 screws
Technical Specifications
Voltage: 115VAC, 60Hz
Current: 312 mA
Power: 36.2 Watts
Pump Motor: 4P, Condenser Run Type
Thermal Protection: Auto reset @ 135˚C
Ambient Temperature 0~50˚C
Weight: 5.1 lbs. (2.3 kg)
* Replacement p/n NPV20P18M120A. See catalog for more details.
1/3 SCALE
6 7/8"
5 1/4"
6 5/8"
BUBBLER AIR
FLOWMETER
ADJUST BUBBLER
AIR PRESSURE
BUBBLER
AIR PRESSURE
3 1/8"
SCFH
15
10
2.0
5 3/16"
1.5
LIFT
AND TURN
TO
ADJUST
20
5
25
psi
30
1.0
.5
INGRAM PRODUCTS INC.
3 1/8"
AIR
JACKSONVILLE FLORIDA
BUBBLER AIR SUPPLY
MODEL BASCR-30
BUBBLER
AIR OUT
RECOMMENDED SETTINGS
CLOSE VALVE ON AIR FLOWMETER TO SET BUBBLER AIR PRESSURE.
0 TO 10 FEET: SET BUBBLER AIR PRESSURE FOR 6 PSI.
0 TO 20 FEET: SET BUBBLER AIR PRESSURE FOR 11 PSI.
0 TO 20 FEET: SET BUBBLER AIR PRESSURE FOR 15 PSI.
SET AIR FLOW RATE TO 0.75 SCFH AT LEVEL 0 FOR ALL RANGES
CAUTION: SETTING BUBBLER AIR PRESSURE HIGHER
THAN NECESSARY WILL SHORTEN THE LIFE OF THE AIR PUMP
3/4"
5 1/2"
4"
1 1/2"
FRONT
R. SIDE
Rev. 2
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
5 7/8"
4"
DRILLED AND TAPPED TO #8-32 X 4
MOUNTING HOLE TEMPLATE
INGRAM
Air Compressor
P R O D U C T S, I N C.
Part No. HR10WB3
The HR10WB3 is designed for use with
bubbler type liquid level control systems with
a control range of 0-15 feet of water column.
Features
One year warranty
Rubber vibration isolation mounting feet
provide quiet operation
Oil free compressor never requires
lubrication
Features a two speed switch, pressure
boost or conserve, which allows optimun
flow/pressure settings
Two replacement intake air filters included
Low power consumption
Corrosion resistant, aluminum panel
mounting bracket sold separately:
Part No. HRMTBKT
Technical Specifications
6W, 60Hz @ 120VAC
Accessories
A fixed orifice choke with a .016" hole is
available for use with air compressor to
reduce airflow volume. (See graph on reverse
side) Part No. IM-.016.
The back check valve prevents fluid from
getting back to your pump during shutdowns
and power failure. Part No. P19CV0012NL.
The 5 micron discharge air filter gives one
final filtering of air before it goes out to your
equipment. It will filter damaging dust
particles from air supply. Part No.
AP19FV0012P1L .
Conserve/Presure
Boost Switch
WITH .016" FIXED ORIFICE CHOKE
WITHOUT A FIXED ORFICE CHOKE
CONSERVE
15
14
13
12
INGRAM
P R O D U C T S , I N C.
JACKSONVILLE, F L
MODEL # HR15WB
120 VAC. 60HZ., 5WATT
1/8" Barbed Brass
Connector (Air Outlet)
5.180"
3.60"
PRESSURE
BOOST
AVG. LIFE 3 YRS.
11
10
9
8
7
6
5
4
INGRAM
P R O D U C T S , I N C.
E
R
3
2
1
2.70"
JACKSONVILLE, FL
0
Easy Change
Intake Air Filter
F
E
E
11
T P 10
R
9
E
O
8
F S
S 7
W U 6
A R 5
T E 4
SERIAL #
HR15WB
CONSERVE
AVG. LIFE 6 YRS.
P
R
E
S
S
U
R
E
BOOST
15
14
13
12
0 1 2 3 4 5 6
7 8 9 10 11 12 13
FLOW
SCFH @ 120 VAC.
Vibration Isolation
3
2
1
0
0 1 2 3 4 5 6
7 8 9 10 11 12 13
FLOW
SCFH @ 120 VAC.
36" 120VAC PowerCord
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Mounting Bracket
P R O D U C T S, I N C.
Part No.: HRMTBKT
Features / Technical Specifications
Fits HR10WB3 & HR15WB pump
Dimensions: 2.25 x 11.062 x .312
INGRAM
Fabricated from 3003-H14 aluminum.
P R O D U C T S , I N C.
JACKSONVILLE, F L
MODEL # HR15WB
120 VAC. 60HZ., 5WATT
Finish: Brushed with gold irridite
Mounting: side or end
PRESSURE
BOOST
AVG. LIFE 3 YRS.
SERIAL #
HR15WB
CONSERVE
AVG. LIFE 6 YRS.
Metal thickness: .080"
INGRAM
P R O D U C T S , I N C.
JACKSONVILLE, FL
Center hole allows for quick filter change
Space Saving Option
INGRAM
INGRAM
P R O D U C T S , I N C.
JACKSONVILLE, F L
MODEL # HR15WB3
P R O D U C T S , I N C.
120 VAC. 60HZ., 5WATT
JACKSONVILLE, F L
MODEL # HR15WB3
PRESSURE
BOOST
AVG. LIFE 3 YRS.
PRESSURE
BOOST
AVG. LIFE 3 YRS.
SERIAL #
SERIAL #
HR15WB
HR15WB
CONSERVE
AVG. LIFE 6 YRS.
120 VAC. 60HZ., 5WATT
INGRAM
CONSERVE
AVG. LIFE 6 YRS.
P R O D U C T S , I N C.
INGRAM
P R O D U C T S , I N C.
JACKSONVILLE, FL
JACKSONVILLE, FL
Side Mounting Option
End Mounting Option
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
HR Pump Accessories
P R O D U C T S, I N C.
Part Nos. AP19FV0012P1L, AP19CV0012NL, IM-.016
Did you know that these little parts can add
life to your air compressor? Just put them
inline with your Ingram Products HR10WB3
and HR15WB air compressors and see the
results years down the road.
Discharge Air Filter
Back Check Valve
The Discharge Air Filter
provides a final stage of
filtering before it goes out to
your equipment. It will filter
particulates that can clog
small orifices and impede air
flow. Keep your compressor
clean and running smoothly
with the AP19FV0012P1L.
The Back Check Valve
has a very low crack
pressure and will
prevent fluids from
getting back to your
pump during
shutdowns or power
failure. Avoid drowning
your valuable
compressor with the
AP19CV0012NL.
AP19FV0012P1L
AP19CV0012NL
Fixed Orifice
The Fixed Orifice is
designed to steady air flow
and reduce pulsing. Insure
accurate pressure readings
and install the IM-.016
diameter fixed orifice into
your compressor system.
IM - .016
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
CONTROL
BOARD
Air Compressor
ELECTRICAL CONTROL LOOP
WATER
LEVEL
INDICATING
CONTROL
Bubbler Tube
Reduces air flow in order to reduce artificial back pressure.
Fixed Orifice
Discharge
Pump
Inflow
Protects gauges, controls equipment and bubbler tubes from inline solids and signal error
producing substances.
Discharge Air Filter
Protects against water from going back into system. This unit should always be used
inline with dual air compressor bubbler systems
WATER LEVEL CONTROL
PROCESS FLOW DIAGRAM
Backcheck Valve
Panel Alarm Light
Bubbler Kits for TUF Pump
Part Nos. BK-10, BK-20, BK-30
The Ingram bubbler kits are designed for Ingram TUF
pumps to be used in bubbler type liquid level control
applications. They must always be used in
conjunction with the pump to prevent excessive
back pressure and heat from developing that can
shorten pump life.The BK-10 kit will maintain
approximately 5 to 6 psi pressure for 0-10ft deep liquid
reservoirs. The BK-20 will maintain 10 to11 psi for
0-20ft systems and the BK-30 will provide 14 to15 psi
for 0-30ft systems.
Photograph
Features / Technical Specifications
Outflow orifice maintains correct flow for
application, minimizing back pressure
Filter keeps contaminants from entering air supply
Bleed orifice relieves excess pump head
pressure. It increases airflow through the
pump to assist cooling
Two 1/8" x 1/8" x 1/8 " barbed tees
1/8" x 1/8" barbed air intake filter
Four 1/8" barb to 1/8" NPT connectors and
two 1/8" barb to 1/4"NPT connectors
1/8" x 1/8" barbed check valve prevents
liquid from backing up tubing during
power outages
15ft of 1/8"ID x 1/4"OD
polyurethane tubing
TUF Pump - Bubbler Liquid Level Control Application
Air Intake Filter
Bleed Orifice
To air intake port
Outflow Orifice
Air Flow
Range
Check Valve
TUF Pump
Air Flow
WATER
LEVEL
INDICATING
SENSOR
Ingram P/N Bleed Orifice Outflow Orifice
0 to 10 Ft.
BK-10
.020"
.010"
0 to 20 Ft.
BK-20
.016"
.012"
0 to 30 Ft.
BK-30
.010"
.010"
1/8" or 1/4" NPT Male Pipe Fitting
Tubing here should be as short as possible
1/8" or 1/4" NPT Male Pipe Fitting
To Customer's Bubbler Tube
8725 Youngerman Court Suite 206, Jacksonville, FL 32244
888-875-2221 ph
(904)733-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
TUF Pump Standard Rebuild Kit
INGRAM
P R O D U C T S, I N C.
Part No. PV20PKSTD
The Ingram Standard Rebuild Kit for the TUF
Pump is required annually for applications
where the pump will be operating 24 hour a
day, 365 days a year. It allows you to quickly
overhaul one unit with only a Phillips head
screwdriver.
Features
Diaphragm
Cover gasket
Two check valve gaskets
Two check valve cover plates
Fasteners
TUF Pump Deluxe Rebuild Kit
Part No. PV20PKDLX
The Ingram Deluxe Rebuild Kit for the TUF
Pump contains all the hardware included in the
Standard Rebuild Kit, plus the start/run
capacitor for the pump.
Features
Diaphragm
Cover gasket
Two check valve gaskets
Two check valve cover plates
Fasteners
4mfd, 250V Capacitor, UL recognized
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Capacitor for TUF Pump
P R O D U C T S, I N C.
Part No. C4MFD250V
The Ingram TUF Pump requires a start/run
capacitor for proper motor operation. This sturdy
component is the direct replacement for the
capacitor that comes with the TUF Pump.
Features
Mounting tab
Quick disconnect terminals
Technical Specifications
4 microfarad capacitance
non-polarized
To Pump Harness
1/2"
TUF Pump capacitor wires
are typically orange and
gray with 1/4" female quick
disconnects at the
terminations.
TOP
7/8"
1 1/2"
L. SIDE
FRONT
Physical Dimensions
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
Electrical Connection
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Multi-Function Moisture Sensing Liquid Level Control
INGRAM
P R O D U C T S, I N C.
Part No. : MSR1P24A, MSR1P120A, MSR1P230A
The Ingram Multi-function Moisture Sensing Relay (MSR)
saves you time and money. No more time spent trying to figure
out the part number and features of the model that you need. All
you have to select is the operating voltage when ordering an
Ingram MSR. Drain or fill, sensitivity and time delay are all user
selectable on the unit. It takes only one Ingram MSR to do the job
of several of the competitor's MSRs.
The MSR was designed for use in two different applications:
(1) Seal monitor relay for use with submersible pumps.
(2) Single probe, single point liquid level indication and control.
Features
Technical Specifications
Drain/Fill selector switch
Adjustable time delay
Adjustable sensitivity up to 250K
Stock item - same day shipping
available
LED Indicator reduces
adjustment time
SPDT isolated contacts
Isolated AC voltage on the probe
5 year warranty
UL Recognized: File E308954
MSR1P24A
MSR1P120A
MSR1P230A
62mA @ 24 VAC
23mA @ 120 VAC
15mA @ 230 VAC
Power Consumption
Probe Voltage
Max Current at Probe
Probe Isolation
Adjustable Sensitivity
Adjustable Response Time
Reset Time
Reset Type
Output
0.55 Watts
12VAC
0.5mA
>1500 VAC
500 - 250K
0.5 - 10 seconds
10 msec
Automatic
SPDT Isolated Relay Contacts
Load: 5A Resistive @ 240VAC
1/10 HP @ 240VAC
-20˚C to +40˚C
Mechanical 100,000
Electrical
50,000
0 to 99% no condensing
ABS Plastic
Octal Base Plug In
8.46oz
Relay Contact Ratings
Operating Temperatures
Life Expectancy
Humidity Tolerance
Enclosure
Mounting
Weight
Applications
Moisture Sensing Relay
Single-point Liquid Level Controls
High or low level alarm
(field selectable)
Seal monitor
Solenoid control
Detect the absence or presence of
conductive liquid or moisture
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
888-875-2221 ph
Boiler low water
cut-off protection
Boiler feed water
level control
HVAC
Pump control
Sump pump
Hydropneumatic tank liquid
level control
(904)778-2444 fax
Food and cooking equipment
Dairy equipment
Steam cookers
Drink dispensers
Tap water
Sea water
Website:www.ingramproducts.com
e-mail: [email protected]
Ingram Products
Multi-function Moisture Sensing Liquid Level Control - 2 of 4
2.894"
8
6
4
1
7
2.417"
2
FILL
3
MOISTURE SENSING
LIQUID LEVEL CONTROL
8 9 10
7
6
SECONDS
5
TIME DELAY
4
3
2 1 0
200225 250
175
150
K OHMS
125
SENSITIVITY
100
75
50 25 0
5
1.787"
DRAIN
APPLICATION NOTES
Seal Monitor Relay
Most submersible pumps have seal chambers filled with oil that has a high electrical resistance. When the
seal for the shaft of the submersible begins to fail, water enters the seal chamber and mixes with the oil
causing the resistance to drop. The MSR senses this drop in resistance and energizes the
electromechanical relay. The relay is normally used to turn on a red warning indicator light that indicates a
seal leak in the pump it is monitoring.
This early warning indicates that the pump seal needs to be repaired before the pump motor becomes
damaged by liquid intrusion.
Failure probes are installed in the seal chamber using two different methods. The most common method is
to install one probe in the chamber. The resistance between the probe and ground or pump housing is
monitored by the seal monitor relay (see diagram 1). The other method uses two probes installed in the
seal chamber. The resistance between the two probes in the seal chamber is monitored by the seal
monitor relay (see diagram 2).
DIAGRAM 2
DIAGRAM 1
4
5
TO PROBE IN PUMP
3
6
2
7
1
TO PUMP
HOUSING
4
3
6
2
7
1
8
5
8
POWER
POWER
GROUND
Continued on Next Page
Multi-function Moisture Sensing Liquid Level Control - 3 of 4
Ingram Products
APPLICATION NOTES (continued)
Adjusting Seal Monitor Relay
Most manufacturers of submersible pumps requiring seal monitoring have a recommended sensitivity setting
for their pumps. The moisture sensing relay should be set at the pump manufacturer's recommended
sensitivity setting. Ingram’s MSR sensitivity can be adjusted from 500 to 250K ohms. It also has an
adjustable time delay from 0.5 to 10 seconds to prevent nuisance tripping.
If the pump manufacturer does not have a recommended sensitivity setting use one of the following methods:
Note: Drain-Fill selector switch must be in the Drain position for this application.
1.
A sensitivity setting of 30K ohms with a two second delay is considered adequate for most submersible
pumps in most applications.
2.
To obtain the earliest possible warning of contaminates entering the seal chamber, set the sensitivity as
follows:
A.
Set the sensitivity potentiometer to the maximum 250K ohms. If the LED comes on and the MSR
relay energizes, slowly turn the sensitivity potentiometer down until the MSR LED goes out.
B.
Note the sensitivity value indicated by the pot when the LED turns off. Set the sensitivity for
approximately 20% less than this value. For example, if the LED goes out at the 100K position
while you are turning the pot down, set the sensitivity to 80K ohms (20% less than 100K ohms).
If the LED does not come on when MSR is adjusted to maximum sensitivity of 250K ohms, leave the setting
at the 250K ohm. Be aware that this high sensitivity setting may result in false seal failure alarms.
Single Point Liquid Level Indication and Control
The MSR relay can be used for single point liquid level indication and/or control of conductive liquids.
Adjusting MSR for liquid level indication and/or control.
There are three adjustments that need to be set for liquid level indication and control:
DRAIN-FILL selector switch located on the top of the MSR.
Drain Position: Timing starts when the liquid level touches the probe connected to pin 5 of the MSR. At
the end of the set time delay the relay will energize and contacts will transfer.
Fill Position: If the liquid level falls below the bottom of the probe that is connected to pin 5 of the MSR,
timing will start and the contacts will transfer after the time delay has elapsed.
Screwdriver adjustable time delay located on top of the MSR.
The purpose of this time delay is to prevent false or momentary activation of the MSR due to wave action
or agitation. It can be adjusted from 0.5 to 10 seconds.
Screw Sensitivity adjustment located on top of the MSR.
The sensitivity should be set as low as practical so long as the MSR responds reliably when the liquid
touches or stops touching the probe. Our table of liquid sensitivity will give you a good idea of the
maximum sensitivity required for various liquids.
Continued on Next Page
Multi-function Moisture Sensing Liquid Level Control - 4 of 4
Ingram Products
Application Examples
High level alarm. (Diagram 3.) In this application the MSR responds to a liquid level that needs to be kept
below the bottom of “HIGH PROBE”. The DRAIN-FILL switch needs to be put in the DRAIN position for
proper operation. When liquid rises and touches the bottom of the “HIGH PROBE”, the MSR begins timing.
When the delay time has elapsed, and the liquid is still in contact with the probe, the MSR will energize and
the relay contacts will transfer. The relay contacts can be used to activate an alarm or solenoid valve or to
start a pump.
Low level alarm. (Diagram 4.) In this application the MSR responds to a liquid level that needs to be kept
above the bottom of “LOW PROBE”. The DRAIN-FILL switch needs to be put in the FILL position for proper
operation. When liquid falls below the bottom of the “LOW PROBE” the MSR begins timing. When the
delay time has elapsed, and the liquid is still not in contact with the probe, the MSR will energize and the
relay contacts will transfer. Again, the relay contacts can be used to activate an alarm or solenoid valve, or
to start a pump.
DIAGRAM 4
DIAGRAM 3
LOW PROBE
HIGH PROBE
COMMON
4
*
COMMON
4
5
5
3
6
3
6
2
7
2
7
1
1
8
If the conductive liquid or container is
grounded pin 6 can be grounded instead
of using a common probe.
8
POWER
POWER
*
*
*
If the conductive liquid or container is
grounded pin 6 can be grounded instead
of using a common probe.
INGRAM
Multi-function Liquid Level Control
P R O D U C T S, I N C.
Part No. :LLC2P24A, LLC2P120A, LLC2P230A
The Ingram Multi-function Liquid Level Control Relay (LLC)
saves you time and money. No more time spent trying to figure out
the part number and features of the model that you need. All you
have to select is the voltage when ordering an Ingram LLC. Drain
or fill, sensitivity and time delay are all user selectable on the unit.
It only takes one Ingram LLC to do the job of several of the
competitor's LLCs.
The LLC was designed for use in two different applications:
(1) Two probe (on-off), liquid level controller.
(2) Seal monitor relay for use with submersible pumps.
Features
Technical Specifications
Drain/Fill selector switch
Adjustable time delay
Adjustable sensitivity up to 100K
Stock item - same day shipping
available
LED Indicator reduces
adjustment time
SPDT isolated contacts
Isolated AC voltage on the probe
5 year warranty
UL Recognized: File E308954
LLC2P24A
LLC2P120A
LLC2P230A
Probe Voltage
Max Current at Probe
Probe Isolation
Adjustable Sensitivity
Adjustable Response Time
Reset Time
Reset Type
Output
Relay Contact Ratings
Operating Temperatures
Life Expectancy
Humidity Tolerance
Enclosure
Mounting
Weight
69mA @ 24 VAC
26mA @ 120 VAC
18mA @ 230 VAC
12VAC
0.5mA
>1500 VAC
500 - 100K
0.5 - 10 seconds
10 msec
Automatic
SPDT Isolated Relay Contacts
4A resistive @ 240VAC
1/10hp @ 240VAC
-20˚C to +40˚C
Mechanical
100,000
Electrical
50,000
0 to 99% no condensing
ABS Plastic
Octal Base Plug In
8.46oz
Applications
High or low level alarm
(field selectable)
2 point level control (on-off)
Single point liquid level controls
Moisture sensing relay
Seal monitor
Solenoid control
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
Boiler low water cutoff protection
Boiler feed water level control
Tap water
Sea water
Pump control
Sump pump
888-875-2221 ph
(904)778-2444 fax
Hydropneumatic tank liquid
level control
Food and cooking equipment
Dairy equipment
Steam cookers
Drink dispensers
Website:www.ingramproducts.com
e-mail: [email protected]
Multi-function Liquid Level Control - 2 of 3
2.894"
1
8
6
4
FILL
80 90 100
7
2.417"
K OHMS
2
70
60
50
40
30
3
MOISTURE SENSING
LIQUID LEVEL CONTROL
8 9 10
7
6
SECONDS
5
TIME DELAY
4
3
2 1 0
5
1.787"
Ingram Products
SENSITIVITY
20 10 0
DRAIN
APPLICATION EXAMPLES
Liquid Level Control
Scenario A: To start and stop a pump that pumps liquid out of a tank to prevent overflow. (See diagram 1).
The DRAIN-FILL switch needs to be in the DRAIN position for this application. As liquid rises in the tank it will
touch the COMMON probe; no action will occur. As the liquid level continues to rise it will come into contact with
the LOW probe and no action will occur. The liquid will continue to rise until it comes into contact with the HIGH
probe. When the liquid touches the HIGH probe the LED will come on, the timer will start and the relay contacts
will transfer after the time delay elapses. The relay contacts can be used to start a pump to expel liquid from
the tank. The pump will remain on until the liquid level falls below the LOW probe at which time the relay will
de-energize and stop the pump.
Scenario B: To start and stop a pump that pumps liquid into a tank to keep the tank from becoming empty.
(See diagram 1) The DRAIN-FILL switch needs to be in the FILL position for this application. If the tank is full
of liquid touching all three probes, no action will occur. As the liquid level falls it will stop touching the HIGH
probe first; no action will occur. As the liquid continues to fall it will stop touching the LOW probe. At this point,
the LED will come on, the timer will start and the relay contacts will transfer after the time delay elapses. The
relay contacts can be used to start a pump that will supply liquid to the tank. As the level rises and touches the
LOW probe, no action will occur. When it reaches the HIGH probe, the relay will de-energize, stopping the
pump.
DIAGRAM 1
Two probe liquid level controller.
The LLC relay can be used as a two point (on off) liquid level controller of
conductive liquids.
COMMON*
LOW PROBE
HIGH PROBE
4
Adjusting LLC for liquid level control.
There are three adjustments that need to be set for liquid level indication
and control:
DRAIN-FILL selector switch located on the top of the LLC.
DRAIN position: The probe connected to pin #8 will activate and start
timing when the liquid level reaches the probe. At the end of the time
delay, the relay will energize and the contacts will transfer.
FILL position: If the liquid level falls below the bottom of the probe
connected to pin 6 of the LLC, it will initiate timing and the contacts will
transfer after the time delay elapses.
5
3
6
2
7
1
8
POWER
If the conductive liquid or container is
* grounded
pin 5 can be grounded instead
of using a common probe.
Screwdriver adjustable time delay located on top of the LLC.
The purpose of the time delay is to prevent false or momentary activation of the LLC due to wave action or
agitation. It can be adjusted from 0.5 to 10 seconds.
Sensitivity adjustment located on top of the LLC.
The sensitivity should be set as low as practical so long as the LLC responds reliably when the liquid touches or
stops touching the probe. Our table of liquid sensitivity will give you a good idea of the maximum sensitivity
required for various liquids.
Multi-function Liquid Level Control - 3 of 3
Ingram Products
Seal Monitor Relay
Most submersible pumps have seal chambers filled with oil that has a high electrical resistance. When the
seal for the shaft of the submersible begins to fail, water enters the seal chamber and mixes with the oil
causing the resistance to drop. The MSR senses this drop in resistance and energizes the
electromechanical relay. The relay is normally used to turn on a red warning indicator light that indicates a
seal leak in the pump it is monitoring.
This early warning indicates that the pump seal needs to be repaired before the pump motor becomes
damaged by liquid intrusion.
Failure probes are installed in the seal chamber using two different methods. The most common method is
to install one probe in the chamber. The resistance between the probe and ground or pump housing is
monitored by the seal monitor relay (see diagram 2). The other method uses two probes installed in the
seal chamber. The resistance between the two probes in the seal chamber is monitored by the seal
monitor relay (see diagram 3).
DIAGRAM 3
DIAGRAM 2
4
5
TO PUMP HOUSING
3
6
2
7
1
8
POWER
4
GROUND
5
6
3
2
TO PROBE IN PUMP
7
1
8
POWER
Adjusting Seal Monitor Relay
Most manufacturers of submersible pumps requiring seal monitoring have a recommended sensitivity setting for
their pumps. The moisture sensing relay should be set at the pump manufacturer's recommended sensitivity
setting. Ingram’s LLC sensitivity can be adjusted from 500 to 100K ohms. It also has an adjustable time delay
from 0.5 to 10 seconds to prevent nuisance tripping.
If the pump manufacturer does not have a recommended sensitivity setting, use one of the following methods:
Note: Drain-Fill selector switch must be in the Drain position for this application.
1.
A sensitivity setting of 30K ohms with a two second delay is considered adequate for most submersible
pumps in most applications.
2.
To obtain the earliest possible warning of contaminates entering the seal chamber, set the sensitivity as
follows:
A.
Set the sensitivity potentiometer to the maximum 100K ohms. If the LED comes on and the LLC
relay energizes, slowly turn the sensitivity potentiometer down until the LLC LED goes out.
B.
Note the sensitivity value indicated by the pot when the LED turns off. Set the sensitivity for
approximately 20% less than this value. For example, if the LED goes out at the 50K position
while you are turning the pot down, set the sensitivity to 40K ohms (20% less than 50K ohms).
If the LED does not come on when LLC is adjusted to maximum sensitivity of 100K ohms, leave the setting at the
100K ohm. Be aware that this high sensitivity setting may result in false seal failure alarms.
THIS PAGE INTENTIONALLY LEFT BLANK
INGRAM
Installation of Relays with
Intrinsically Safe Outputs
P R O D U C T S, I N C.
Installation of these relays should only be performed by personnel experienced with intrinsically
safe devices. Proper wiring practices must be strictly adhered to in order to prevent injury to
personnel and property damage due to explosion or fire.
IMPORTANT: BEFORE PROCEEDING TO INSTALL AND WIRE THE RELAY, READ AND THOROUGHLY UNDERSTAND THESE INSTRUCTIONS.
When installed according to the following instructions and Control Drawing A-6757-4 these Relays
are for use in Class I, Division 1, Groups A, B, C, and D. The relay must be mounted in a suitable
enclosure which is tool accessible and is situated in a non hazardous area where an explosive
atmosphere will not exist at any time.
WIRING:
1.
All intrinsically safe wiring should be installed in accordance with NEC NFPA 70 Article 504 and
ISA RP 12.6
2.
Electrical equipment connected to the non intrinsically safe side should not use or be capable
of generating more than 250 volts with respect to earth.
3.
Intrinsically safe wiring connecting to the relay must be kept separate from non-intrinsically safe
wiring by means of physical barriers and wiring tie down devices to insure no contact.
4.
The cabinet must have a proper earth ground and the relay must be grounded. At least one ground
from the intrinsically safe side and the non intrinsically safe side of relay must be made using #12
AWG insulated conductors. The units redundant earth ground wires must be individually
connected with metal screws and lockwashers to the cabinets earth ground. Resistance between
the relay ground to the grounding electrode shall be less than one ohm.
5.
Intrinsically safe connections must not be made to any energy generating device or device mounted
inside a tank subjected to pressures greater than 15 psi without specific approval.
6.
Maximum distance between the input of the relay and the switch is 1000 feet. Cable capacitance
plus intrinsically safe equipment capacitance must be less than the marked capacitance (Ca)
shown on any barrier used. The same applies for inductance. We recommend the use of 14 AWG
type THHN wire without splices. In no case should the capacitance or inductance exceed the
specified limits. If the characteristics of your wire are unknown the following values may be used.
CAPACITANCE: 60 pf / ft
INDUCTANCE: 0.20 μh / ft
7.
This device may be used in
a Division 2 Location if so
approved.
CONTROL DRAWING A6757-4
LATCHING RELAY
NON-HAZARDOUS LOCATION
IS GND
NO
250V MAX
C
IN B
LOW SWITCH
G
NC
8.
Selected barriers must have
Voc not exceeding Vmax and
Isc not exceeding Imax as
shown below. All barriers
bust be of the same polarity.
Entity parameters:
Voc = 5.89 Volts
Isc = 0.132 mA
Ca = 0.45 μf
La=500mH
Voc ) Vmax
Isc ) Imax
Ca * CI + Ccable
La * Li + Lcable
HAZARDOUS LOCATION
CLASS I, GROUPS A,B,C,D
SEE NOTE 2
PUMP DOWN
OPERATION
SHOWN WITH N.O.
FLOAT SWITCHES
G
HI SWITCH
COMMON LVS
LVS
GND
IN A
GND
IS GND
SWITCH CONTACT SEE NOTE 5
INTRINSICALLY SAFE WIRING SEE NOTE
LOW VOLTAGE
ISOLATED
POWER
NOTE 4
2 CHANNEL RELAY
NON-HAZARDOUS LOCATION
HAZARDOUS LOCATION
CLASS I, GROUPS A,B,C,D
SEE NOTE 2
IS GND
NO
250V MAX
B
C
IN B
B SWITCH
G
C
G
A
250V MAX
COMMON
NO
LVS
LVS
A SWITCH
GND
IN A
GND
IS GND
SWITCH CONTACT SEE NOTE 5
INTRINSICALLY SAFE WIRING SEE NOTE
LOW VOLTAGE
ISOLATED
POWER
NOTE 4
INGRAM
Installation of Relays with
Intrinsically Safe Outputs
P R O D U C T S, I N C.
Installation of these relays should only be performed by personnel experienced with intrinsically
safe devices. Proper wiring practices must be strictly adhered to in order to prevent injury to
personnel and property damage due to explosion or fire.
IMPORTANT: BEFORE PROCEEDING TO INSTALL AND WIRE THE RELAY, READ AND THOROUGHLY UNDERSTAND THESE INSTRUCTIONS.
When installed according to the following instructions and Control Drawing A-6757-4 these Relays
are for use in Class I, Division 1, Groups A, B, C, and D. The relay must be mounted in a suitable
enclosure which is tool accessible and is situated in a non hazardous area where an explosive
atmosphere will not exist at any time.
WIRING:
1.
All intrinsically safe wiring should be installed in accordance with NEC NFPA 70 Article 504 and
ISA RP 12.6
2.
Electrical equipment connected to the non intrinsically safe side should not use or be capable
of generating more than 250 volts with respect to earth.
3.
Intrinsically safe wiring connecting to the relay must be kept separate from non-intrinsically safe
wiring by means of physical barriers and wiring tie down devices to insure no contact.
4.
The cabinet must have a proper earth ground and the relay must be grounded. At least one ground
from the intrinsically safe side and the non intrinsically safe side of relay must be made using #12
AWG insulated conductors. The units redundant earth ground wires must be individually
connected with metal screws and lockwashers to the cabinets earth ground. Resistance between
the relay ground to the grounding electrode shall be less than one ohm.
5.
Intrinsically safe connections must not be made to any energy generating device or device mounted
inside a tank subjected to pressures greater than 15 psi without specific approval.
6.
Maximum distance between the input of the relay and the switch is 1000 feet. Cable capacitance
plus intrinsically safe equipment capacitance must be less than the marked capacitance (Ca)
shown on any barrier used. The same applies for inductance. We recommend the use of 14 AWG
type THHN wire without splices. In no case should the capacitance or inductance exceed the
specified limits. If the characteristics of your wire are unknown the following values may be used.
CAPACITANCE: 60 pf / ft
INDUCTANCE: 0.20 μh / ft
7.
This device may be used in
a Division 2 Location if so
approved.
CONTROL DRAWING A6757-4
LATCHING RELAY
NON-HAZARDOUS LOCATION
IS GND
NO
250V MAX
C
IN B
LOW SWITCH
G
NC
8.
Selected barriers must have
Voc not exceeding Vmax and
Isc not exceeding Imax as
shown below. All barriers
bust be of the same polarity.
Entity parameters:
Voc = 5.89 Volts
Isc = 0.132 mA
Ca = 0.45 μf
La=500mH
Voc ) Vmax
Isc ) Imax
Ca * CI + Ccable
La * Li + Lcable
HAZARDOUS LOCATION
CLASS I, GROUPS A,B,C,D
SEE NOTE 2
PUMP DOWN
OPERATION
SHOWN WITH N.O.
FLOAT SWITCHES
G
HI SWITCH
COMMON LVS
LVS
GND
IN A
GND
IS GND
SWITCH CONTACT SEE NOTE 5
INTRINSICALLY SAFE WIRING SEE NOTE
LOW VOLTAGE
ISOLATED
POWER
NOTE 4
2 CHANNEL RELAY
NON-HAZARDOUS LOCATION
HAZARDOUS LOCATION
CLASS I, GROUPS A,B,C,D
SEE NOTE 2
IS GND
NO
250V MAX
B
C
IN B
B SWITCH
G
C
G
A
250V MAX
COMMON
NO
LVS
LVS
A SWITCH
GND
IN A
GND
IS GND
SWITCH CONTACT SEE NOTE 5
INTRINSICALLY SAFE WIRING SEE NOTE
LOW VOLTAGE
ISOLATED
POWER
NOTE 4
5HOD\ZLWK
,QWULQVLFDOO\
6DIH,QSXWV
-,ڇ,
&KDQQHO
6SHFLÀFDWLRQV
(OHFWULFDO
3K\VLFDO
6XSSO\9ROWDJH9$&“
3RZHU9$
,QSXWV6ZLWFK&ORVXUH
RU3UREH&RQGXFWLYLW\
,QSXW6HQVLWLYLW\.0Ÿ
3LFNXS'URSRXW'HOD\VVHFRQG
0D[2SHQ&LUFXLW9ROWDJHYROWV$&
0D[6RXUFH&XUUHQWPLOOLDPS$&
2XWSXW5DWLQJ#ƒ&
$PSVRU9$SHUFRQWDFW
$PSVWRWDO
9$&PD[LPXPFRQWDFWUDWLQJ
0HFKDQLFDO&\FOHV
0RXQWLQJ'LQ5DLOPRXQW
7HUPLQDWLRQ7RXFKVDIHVFUHZWHUPLQDOV
ZLWKOLIWPHFKDQLVP$:*PD[IRU
VXSSO\DQGUHOD\FRQWDFWV$:*
PD[IRULQWULQVLFDOO\VDIHLQSXWV
:HLJKW2]
$PELHQW7HPSHUDWXUHV
2SHUDWLQJƒ&WRƒ&
6WRUDJHƒ&WRƒ&
‡ RU&KDQQHOV
‡ 6KRUWHG,QSXW6HQVLQJ
‡ 2SHQ,QSXW6HQVLQJ
‡ 2XWSXWV,VRODWHG
IURP6XSSO\
‡ &RQWDFWRU3UREH,QSXWV
‡ &RQGXFWLYLW\RU
5HVLVWDQFH,QSXWV
‡ 2XWSXWDQG,QSXW
/(',QGLFDWLRQ
‡ ,QGHSHQGHQW2SHUDWLRQ
‡ 3OXJJDEOH7HUPLQDO%ORFNV
‡ 'LQRU6XUIDFH0RXQW
‡ WR9$&6XSSO\
2UGHULQJ,QIRUPDWLRQ
,65 5 $5
6HQVLWLYLW\
. 2KPV
. 2KPV
. 2KPV
BBB 2WKHU2SWLRQV
,QJUDP0RGHO
1XPEHURI&KDQQHOV
,2
,2
,2
,2
5HOD\2SHUDWLRQ
5 5HOD\
0RXQWLQJ2SWLRQV
5 ',15DLO
6 6XUIDFH
2SHUDWLQJ9ROWDJH
$ 9$&
$ 9$&
$ 9$&
'LPHQVLRQV
&RQQHFWLRQV
.ON(AZARDOUS,OCATION
!#3UPPLY
6OLTAGE
8/
6!#
s s s
!
"
#
&ODVV,'LYLVLRQ
*URXSV$%&'
%0
$
2SHUDWLRQ
0OWER
!
,QGHSHQGHQW&KDQQHO5HOD\
"
#
$
s s s s s s
!
"
#
$
)NTRINSICALLY
3AFE7IRING
s s
s s
s s
s s
#ONTACT
2ESISTANCE
OR#ONDUCTIVITY
6XSSO\YROWDJHPXVWEHDSSOLHGWRWKH
,65B5UHOD\GXULQJRSHUDWLRQ7KH,65B
5FDQKDYHRUFKDQQHOV:KHQ
,6LQSXWFORVHVLWV/('FKDQJHVDQG
RXWSXWFRQWDFWFORVHV:KHQ,6LQSXW
RSHQVRXWSXWFRQWDFWRSHQV(DFK
FKDQQHORSHUDWHVLQGHSHQGHQWRIWKHRWKHU
FKDQQHOV/('LQGLFDWRUVDUH
5HG:KHQWKH,6LQSXWLVRSHQRUKLJK
*UHHQ:KHQERWKWKH,6LQSXWRXWSXW
FRQWDFWDUHFORVHG
)ODVKHV'XULQJWUDQVLWLRQGHOD\
$JUHHQ/('LQGLFDWHVZKHQVXSSO\
YROWDJHKDVEHHQDSSOLHGWRWKH,65B5
RU‡ZZZLQJUDPSURGXFWVFRP‡VDOHV#LQJUDPSURGXFWVFRP
,QVWDOODWLRQRI5HOD\VZLWK
,QWULQVLFDOO\6DIH,QSXWV
6;<)44)<176 7. "-4)A 7,=4- ?1<0 6<:16;1+)44A #).- 68=<;
6;<)44)<176 7. <0-;- :-4)A; ;07=4, 764A *- 8-:.7:5-, *A 8-:;766-4 [email protected]:1-6+-,
?1<0 16<:16;1+)44A ;).- ,->1+-; !:78-: ?1:16/ 8:)+<1+-; 5=;< *- ;<:1+<4A ),0-:-,
<7 16 7:,-: <7 8:->-6< 162=:A <7 8-:;766-4 )6, 8:78-:<A ,)5)/- ,=- <7 [email protected];176 7: .1:-
! "$$ " !" $ #$ $ &
" $ " %( %"#$ $# #$"%$ #
'0-6 16;<)44-, )++7:,16/ <7 <0- .7447?16/ 16;<:=+<176; <0- "-4)A 7,=4- 8:7>1,- +1:+=1<;
.7: =;- 16 4);; 1>1;176 :7=8; )6, $0- ,->1+- 5=;<
*- 57=6<-, 16 ) ;=1<)*4- -6+47;=:- ?01+0 1; <774 )++-;;1*4- )6, 1; ;1<=)<-, 16 )
676 0)B):,7=; ):-) ?0-:- )6 [email protected];1>- )<57;80-:- ?144 67< [email protected];< )< )6A <15-
#
!!# "!#
;;7+1)<-, 88):)<=;
&7+ 7: &< 7: %7
;+ 7: < 7: 7
!7
) 7: 7
) 7: 7
&! !( $#$#
% )*+
#-.), % !
##
& (
!# !" $$
! $ $
& !" $$
*" %# $ $
" $ "
# # "$ "%$ $ "
" " $ "
" (
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
*" %# $ ## " %!# "
"
!" (
#
"
"
"
"
#
#'$ $$ "##$&
%$&$) !" # $ $# (
!
" (
"# $"#) # '" # $# #
!& (
$" "'
#!"( " $#"
"'''''''''
!!
''' %
#%!!)
& $
'"
;;7+1)<-, )88):)<=; 5=;< *- 16;<)44-, 16 )6 -6+47;=:- ;=1<)*4- .7: <0- )8841+)<176
16 )++7:,)6+- ?1<0 <0- )<176)4 4-+<:1+)4 7,- #! .7: 16;<)44)<176 16 <0%61<-, #<)<-; <0- )6),1)6 4-+<:1+)4 7,- .7: 16;<)44)<176; 16 )6),) 7: 7<0-: 47+)4
+7,-; ); )8841+)*4-
'0-:- 5=4<184- +1:+=1<; [email protected]<-6, .:75 <0- ;)5- 81-+- 7. );;7+1)<-, )88):)<=; <0-A
5=;< *- 16;<)44-, 16 ;-8):)<- +)*4-; 7: 16 76- +)*4- 0)>16/ ;=1<)*4- 16;=4)<176 "-.-:
<7 :<1+4- 7. <0- )<176)4 4-+<:1+)4 7,- #! )6, 6;<:=5-6<
#7+1-<A 7. 5-:1+) "-+755-6,-, !:)+<1+- # "!
.7: 16;<)4416/ 16<:16;1+)44A ;).- -9=185-6<
6<:16;1+)44A ;).- +1:+=1<; 5=;< *- ?1:-, )6, ;-8):)<-, 16 )++7:,)6+- ?1<0
:<1+4- 7. <0- )<176)4 4-+<:1+)4 7,- #! 7: 7<0-: 47+)4 +7,-; ); )8841+)*4-
/-,10.,+/ -9=185-6< +766-+<-, <7 <0- 676 16<:16;1+)44A ;).- ;1,- ;07=4, 67< =;- 7: *- +)8)*47. /-6-:)<16/ 57:- <0)6 >74<; ?1<0 :-;8-+< <7 -):<0
6<:16;1+)44A ;).- ?1:16/ +766-+<16/ <7 <0- :-4)A 5=;< *- 3-8< ;-8):)<- .:75 67616<:16;1+)44A ;).?1:16/ *A 5-)6; 7. 80A;1+)4 *)::1-:; )6, ?1:16/ <1- ,7?6 ,->1+-; <7 16;=:- 67 +76<)+<
)*4- +)8)+1<)6+- 84=; 16<:16;1+)44A ;).- -9=185-6< +)8)+1<)6+- 5=;< *- 4-;; <0)6 <0- 5):3-,
+)8)+1<)6+- ) ;07?6 76 )6A *)::1-: =;-, $0- ;)5- )8841-; .7: 16,=+<)6+-
'- :-+755-6, <0- =;- 7. <A8- $ ?1:- ?1<07=< ;841+-; 6 67 +);- ;07=4, <0- +)8)+1<)6+7: 16,=+<)6+- [email protected]+--, <0- ;8-+1.1-, 4151<; . <0- +0):)+<-:1;<1+; 7. A7=: ?1:- ):- =6367?6 <0.7447?16/ >)4=-; 5)A *- =;-,
!$ 8. .< %$ 0 .<
#-4-+<-, 16<:16;1+)44A ;).- -9=185-6< 5=;< *- <01:, 8):<A 41;<-, ); 16<:16;1+)44A ;).- .7: <0)8841+)<176 )6, 0)>- 16<:16;1+)44A ;).- -6<1<A 8):)5-<-:; +76.7:516/ ?1<0 $)*4- *-47?
$0- -6<1<A 8):)5-<-:; 0)>- *--6 );;1/6-, *);-, 76 <0- ?7:;- +);- +75*16)<176 7. )44 16<:16;1+)44A
;).- +1:+=1<;
$)*4- # 9=185-6<
& 5)@ 7: %1
5)@ 7: 1
! 5)@ !1
1 +)*41 +)*4-
6<1<A 8):)5-<-:;
&7+ &74<;
4;+ 5
) .
) 5
&7+ &5)@
;+ 5)@
) 1 +)*4) 1 +)*4-
! !&" !%
"! #
"
$# !& #
RU‡ZZZLQJUDPSURGXFWVFRP‡VDOHV#LQJUDPSURGXFWVFRP
/DWFKLQJ5HOD\
ZLWK
,QWULQVLFDOO\
6DIH,QSXWV
-,ڇ
6SHFLÀFDWLRQV
(OHFWULFDO
3K\VLFDO
6XSSO\9ROWDJH9$&“
3RZHU9$
,QSXWV6ZLWFK&ORVXUH
RU3UREH&RQGXFWLYLW\
,QSXW6HQVLWLYLW\.0Ÿ
3LFNXS'URSRXW'HOD\VVHFRQG
0D[2SHQ&LUFXLW9ROWDJHYROWV$&
0D[6RXUFH&XUUHQWPLOOLDPS$&
2XWSXW5DWLQJ#ƒ&
$PSVRU9$SHUFRQWDFW
$PSVWRWDO
9$&PD[LPXPFRQWDFWUDWLQJ
0HFKDQLFDO&\FOHV
0RXQWLQJ'LQ5DLOPRXQW
7HUPLQDWLRQ7RXFKVDIHVFUHZWHUPLQDOV
ZLWKOLIWPHFKDQLVP$:*PD[IRU
VXSSO\DQGUHOD\FRQWDFWV$:*
PD[IRULQWULQVLFDOO\VDIHLQSXWV
:HLJKW2]
$PELHQW7HPSHUDWXUHV
2SHUDWLQJƒ&WRƒ&
6WRUDJHƒ&WRƒ&
‡ /DWFKLQJ/RJLF
‡ 3XPS'RZQRU3XPS8S
‡ RU&KDQQHOV
‡ 6KRUWHG,QSXW6HQVLQJ
‡ 2SHQ,QSXW6HQVLQJ
‡ &RQWDFWRU3UREH,QSXWV
‡ 2XWSXWDQG,QSXW
/(',QGLFDWLRQ
2UGHULQJ,QIRUPDWLRQ
,65 5 $/
6HQVLWLYLW\
. 2KPV
. 2KPV
. 2KPV
BBB 2WKHU2SWLRQV
,QJUDP0RGHO
1XPEHURI&KDQQHOV
,2
,2
,2
5HOD\2SHUDWLRQ
/ /DWFK
0RXQWLQJ2SWLRQV
5 ',15DLO
6 6XUIDFH
2SHUDWLQJ9ROWDJH
$ 9$&
$ 9$&
$ 9$&
8/
&ODVV,'LYLVLRQ
*URXSV$%&'
%0
2SHUDWLRQ
'LPHQVLRQV
&RQQHFWLRQV
.ON(AZARDOUS,OCATION
6!#
)RXU&KDQQHO/DWFKLQJ5HOD\
!#3UPPLY
6OLTAGE
s s s
!
"
#
$
0OWER
!
"
#
$
s s s s s s
!
"
#
$
)NTRINSICALLY
3AFE7IRING
s s
s s
s s
s s
#ONTACT
2ESISTANCE
OR#ONDUCTIVITY
6XSSO\YROWDJHPXVWEHDSSOLHGWRWKH,65B/
UHOD\GXULQJRSHUDWLRQ7KH,65B/FDQKDYH
RUFKDQQHOV7KHODWFKLQJORJLFLVVHW
XSIRUDSXPSGRZQRSHUDWLRQ3XPSXSLV
DYDLODEOHWRR:KHQ,6LQSXWFORVHVLWV
/('FKDQJHVDQGRXWSXWFRQWDFWFORVHV
:KHQ,6LQSXWFORVHVRXWSXWFRQWDFW
FORVHVODWFKHVLQDQGVWDUWVWKHÀUVWSXPS
:KHQ,6LQSXWVDQGFORVH2XWSXW
FRQWDFWVDQGODWFKFORVHGUHVSHFWLYHO\
$OORXWSXWFRQWDFWVUHPDLQFORVHGHYHQLI
WKHLULQSXWVRSHQXQWLOLQSXWRSHQVDQG
DOORXWSXWFRQWDFWVRSHQLQGLFDWLQJWKDWWKH
V\VWHPKDVSXPSHGGRZQ
/('LQGLFDWRUVZLOOEH
5HG:KHQWKH,6LQSXWLVRSHQRUKLJK
*UHHQ:KHQERWKWKH,6LQSXWRXWSXW
FRQWDFWDUHFORVHG
$PEHU/DWFK/RJLF,6LQSXWRSHQ
2XWSXWFORVHG
)ODVKHV'XULQJWUDQVLWLRQGHOD\
$JUHHQ/('LQGLFDWHVZKHQVXSSO\
YROWDJHKDVEHHQDSSOLHGWRWKH,65B/
RU‡ZZZLQJUDPSURGXFWVFRP‡VDOHV#LQJUDPSURGXFWVFRP
3
,QVWDOODWLRQRI5HOD\VZLWK
,QWULQVLFDOO\6DIH,QSXWV
6;<)44)<176 7. "-4)A 7,=4- ?1<0 6<:16;1+)44A #).- 68=<;
6;<)44)<176 7. <0-;- :-4)A; ;07=4, 764A *- 8-:.7:5-, *A 8-:;766-4 [email protected]:1-6+-,
?1<0 16<:16;1+)44A ;).- ,->1+-; !:78-: ?1:16/ 8:)+<1+-; 5=;< *- ;<:1+<4A ),0-:-,
<7 16 7:,-: <7 8:->-6< 162=:A <7 8-:;766-4 )6, 8:78-:<A ,)5)/- ,=- <7 [email protected];176 7: .1:-
! "$$ " !" $ #$ $ &
" $ " %( %"#$ $# #$"%$ #
'0-6 16;<)44-, )++7:,16/ <7 <0- .7447?16/ 16;<:=+<176; <0- "-4)A 7,=4- 8:7>1,- +1:+=1<;
.7: =;- 16 4);; 1>1;176 :7=8; )6, $0- ,->1+- 5=;<
*- 57=6<-, 16 ) ;=1<)*4- -6+47;=:- ?01+0 1; <774 )++-;;1*4- )6, 1; ;1<=)<-, 16 )
676 0)B):,7=; ):-) ?0-:- )6 [email protected];1>- )<57;80-:- ?144 67< [email protected];< )< )6A <15-
#
!!# "!#
;;7+1)<-, 88):)<=;
&7+ 7: &< 7: %7
;+ 7: < 7: 7
!7
) 7: 7
) 7: 7
& (
!# !" $$
! $ $
& !" $$
*" %# $ !( $#$#
% )*+
#-.), % !
##
&! $
" $ "
# # "$ "%$ $ "
" " $ "
" (
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
*" %# $ ## " %!# "
"
!" (
#
"
"
"
"
#
#'$ $$ "##$&
%$&$) !" # $ $# (
!
" (
"# $"#) # '" # $# #
!& (
$" "'
"
#!"( " $#"
"'''''''''
!!
''' %
#%!!)
& $
'"
;;7+1)<-, )88):)<=; 5=;< *- 16;<)44-, 16 )6 -6+47;=:- ;=1<)*4- .7: <0- )8841+)<176
16 )++7:,)6+- ?1<0 <0- )<176)4 4-+<:1+)4 7,- #! .7: 16;<)44)<176 16 <0%61<-, #<)<-; <0- )6),1)6 4-+<:1+)4 7,- .7: 16;<)44)<176; 16 )6),) 7: 7<0-: 47+)4
+7,-; ); )8841+)*4-
'0-:- 5=4<184- +1:+=1<; [email protected]<-6, .:75 <0- ;)5- 81-+- 7. );;7+1)<-, )88):)<=; <0-A
5=;< *- 16;<)44-, 16 ;-8):)<- +)*4-; 7: 16 76- +)*4- 0)>16/ ;=1<)*4- 16;=4)<176 "-.-:
<7 :<1+4- 7. <0- )<176)4 4-+<:1+)4 7,- #! )6, 6;<:=5-6<
#7+1-<A 7. 5-:1+) "-+755-6,-, !:)+<1+- # "!
.7: 16;<)4416/ 16<:16;1+)44A ;).- -9=185-6<
6<:16;1+)44A ;).- +1:+=1<; 5=;< *- ?1:-, )6, ;-8):)<-, 16 )++7:,)6+- ?1<0
:<1+4- 7. <0- )<176)4 4-+<:1+)4 7,- #! 7: 7<0-: 47+)4 +7,-; ); )8841+)*4-
/-,10.,+/ -9=185-6< +766-+<-, <7 <0- 676 16<:16;1+)44A ;).- ;1,- ;07=4, 67< =;- 7: *- +)8)*47. /-6-:)<16/ 57:- <0)6 >74<; ?1<0 :-;8-+< <7 -):<0
6<:16;1+)44A ;).- ?1:16/ +766-+<16/ <7 <0- :-4)A 5=;< *- 3-8< ;-8):)<- .:75 67616<:16;1+)44A ;).?1:16/ *A 5-)6; 7. 80A;1+)4 *)::1-:; )6, ?1:16/ <1- ,7?6 ,->1+-; <7 16;=:- 67 +76<)+<
)*4- +)8)+1<)6+- 84=; 16<:16;1+)44A ;).- -9=185-6< +)8)+1<)6+- 5=;< *- 4-;; <0)6 <0- 5):3-,
+)8)+1<)6+- ) ;07?6 76 )6A *)::1-: =;-, $0- ;)5- )8841-; .7: 16,=+<)6+-
'- :-+755-6, <0- =;- 7. <A8- $ ?1:- ?1<07=< ;841+-; 6 67 +);- ;07=4, <0- +)8)+1<)6+7: 16,=+<)6+- [email protected]+--, <0- ;8-+1.1-, 4151<; . <0- +0):)+<-:1;<1+; 7. A7=: ?1:- ):- =6367?6 <0.7447?16/ >)4=-; 5)A *- =;-,
!$ 8. .< %$ 0 .<
#-4-+<-, 16<:16;1+)44A ;).- -9=185-6< 5=;< *- <01:, 8):<A 41;<-, ); 16<:16;1+)44A ;).- .7: <0)8841+)<176 )6, 0)>- 16<:16;1+)44A ;).- -6<1<A 8):)5-<-:; +76.7:516/ ?1<0 $)*4- *-47?
$0- -6<1<A 8):)5-<-:; 0)>- *--6 );;1/6-, *);-, 76 <0- ?7:;- +);- +75*16)<176 7. )44 16<:16;1+)44A
;).- +1:+=1<;
$)*4- # 9=185-6<
& 5)@ 7: %1
5)@ 7: 1
! 5)@ !1
1 +)*41 +)*46<1<A 8):)5-<-:;
&7+ &74<;
4;+ 5
) .
) 5
&7+ &5)@
;+ 5)@
) 1 +)*4) 1 +)*4-
! !&" !%
"! #
$# !& #
RU‡ZZZLQJUDPSURGXFWVFRP‡VDOHV#LQJUDPSURGXFWVFRP
ANLY TIMER
APT-9SWEEKLY PROGRAMMABLE
Stocked and distributed by Ingram Products Inc.
CHARACTERISTIC :
TIMER
Jacksonville, FL
ingramproducts.com
SPECIFICATION :
Weekly programmable timer
Operating voltage
AC/DC(V): 12~48
AC/DC(V): 100~240
80 different timing settings per day
Allowable operating
voltage range
85~110% of rated operating voltage
Different weekday combinations assignment
for each task
Rated frequency
50 / 60 Hz
Contact rating
250VAC 7A (resistive load)
Indicator operating
ON - Green OFF - Red
Crystal oscillator for extreme accuracy
Power consumption
Approx. 3.3VA
EEPROM program memory for battery
independence
Life
Mechanical: 5,000,000 times
Electrical:
100,000 times
Ambient temperature
-10 ~ +50
Ambient humidity
MAX 65%RH
Weight
Approx. 170g
Built-in Lithium battery prevent power
outage up to one year
Separate twin timer feature for ON-time
or ON-time-OFF-time countdown
Daylight-saving-time function
Backlit LCD for easy viewing
UL, C-UL recognized and CE certified
A 30
P ro d u c t i s s ubjec t t o c hange w it hout not ic e.
CONNECTION :
When a time switch and load power supply are separate
N type(Surface Mounting)
Y type(Flush Mounting)
PROGRAMMABLE TIMER
DAY
12/24H
HR
MODE
PROG.
START
min
TIMER
OFF ON
PULSE
sec
BAT.
ON
GREEN
OFF
RED
+1H
MIN
MAN
SEC
CLEAR
RESET
APT-9S
LOAD
LOAD
When a time switch and load power supply are the same
N type(Surface Mounting)
Y type(Flush Mounting)
PROGRAMMABLE TIMER
DAY
12/24H
HR
MODE
PROG.
START
min
TIMER
OFF ON
PULSE
sec
BAT.
ON
GREEN
OFF
RED
+1H
MIN
MAN
SEC
CLEAR
RESET
APT-9S
LOAD
LOAD
DIMENSIONS : (mm)
N type(Surface Mounting):
Y type(Flush Mounting): Using Y70 Adapter
ANLY ELECTRONICS CO., LTD.
http://www.anly.com.tw
TAIWAN MAIN OFFICE :
ANLY ELECTRONICS CO., LTD.
No.19, Lane 202, Fushou St., Shinjuang City, Taipei, Taiwan 242
TEL: +886-2-2996-3202 FAX: +886-2-2996-2017
MALAYSIA BRANCH :
JUSTY ELECTRONICS (M) SDN, BHD.
No.1, Jalan 6/89B, Kawasan Perindustrian Trisegi, Batu 3 1/2 Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia
TEL: +60-3-7983-5758
FAX: +60-3-7981-5052
HONG KONG BRANCH : ANLY ELECTRONICS (HK) LTD.
Flat K, 13/F, Edward Mansion, 141 Prince Edward Road W., Kowloon, Hong Kong
TEL: +852-2397-2505
FAX: +852-2397-6080
CHINA SALES OFFICE : ANLY TECHNOLOGY (WUXI) CO., LTD.
Room 3D, Zhaofeng Building, No.9, Alley 396, Changning Rd., Changning District, Shanghai, China 200042
TEL: +86-21-6213-9371 FAX: +86-21-6212-3483
NO. APT9-D-A
APT-8S / APT-9S
SAFETY PRECAUTION This manual uses the following symbols to ensure safe operation of this timer.
WEEKLY PROGRAMMABLE TIMER
User's Manual
WARNING
CAUTION
Warnings are indicated when mishandling this controller might result in death or serious injury
to user.
Cautions are indicated when mishandling this controller might result in minor injury to the user,
or only physical damage to the timer.
WARNING
RESTRICTIONS ON USE
ΘNote this incorrect wiring of this controller can damage it and lead to other hazards. Make sure the controller has
been correctly wired before turning the power ON.
ΘBefore wiring, or removing / mounting the controller, be sure to turn the power OFF. Failure to do so might cause
electric shock.
ΘDo not touch electrically charged parts such as the power terminals. Doing so might cause electric shock.
ΘDo not disassemble the controller. Doing so might cause electric shock or faulty operation.
When using this product in applications
that require particular safety or when
using this product in important facilities,
please pay attention to the safety of the
overall system and equipment. Install failsafe mechanisms, perform redundancy
checks and periodic inspections and
adopt other appropriate safety measures
when it is necessary.
CAUTION
ΘUse the controller within the operating ranges recommended in the specification (temperature, humidity, voltage,
shock, mounting direction, atmosphere and etc.). Failure to do so might cause fire or faulty operation.
ΘFirmly tighten the terminal screws. Insufficient tightening of terminal screws might cause electric shock or fire.
SPECIFICATIONS
BUTTON and SWITCH FUNCTIONS
Operating voltage
AC/DC : 12 ~ 48V / AC/DC : 100 ~ 240V
Allowable operating
voltage range
85 ~ 110% of rated operating voltage
Rated frequency
50 / 60 Hz
Contact rating
250VAC 10A (Resistive load)
Indicator operating
POWER - Red / RELAY ON - Green
Power consumption
Approx. 3.3VA
Life
Mechanical : 5,000,000 times / Electrical : 100,000 times
Ambient temperature -10 ~ +50 °C
Ambient humidity
MAX 85% RH
Weight
Approx. 170g
Θʳ DAY
ΘʳʳHR
Θʳ MIN
Θʳ SEC
Θ MODE
ΘPROG.
ΘSTART
ΘCLEAR
Θ 12/24H
Θʳ +1H :
Θʳ MAN :
Θ RESET :
ΘTIMER
ΘPULSE
Θmin
Θsec
ΘON
ΘOFF
: Weekday setting
: Hour setting
: Minute setting
: Second setting
: Mode status selecting
: Program number setting
: Normal mode setting
: Clear setting
: 12H or 24H setting
Daylight-saving-time setting
Mandatory contact enable or disable
Program reset
: Timer mode
: Pluse mode
: Unit of minute (in TWIN TIMER)
: Unit of second (in TWIN TIMER)
: Power on (Battery on)
: Power off (Battery off)
OPERATING FLOWCHART
OFF ON
1
CLOCK MODE
RESET
BAT.
OR
DAY
HR
MIN
CLEAR
TU
TU
TU
5S
SU MO TU WE TH FR SA
MO
SE T
CLOCK SETTING
SET WEEKDAY
SET HOUR
CLEAR EEPROM(APT-9S
SET MINUTE
only)
MODE
2
NORMAL MODE
CHANGE TO THE NORMAL MODE
12/24H
+1H
MAN
MAN
3S
MO
MO
CLK
CLK
AM
PM
NORMAL
+1h
MO
SELECT 12H OR 24H
ON OFF
CLK
SET SUMMER TIME
MO
CLK
ON OFF
MO
CLK
SHIFT THE OUTPUT STATUS
SHIFT THE OUTPUT STATUS
(MOMENTARY OPERATION)
(PEMANENT OPERATION)
MODE
3
PROGRAM MODE(Choose ONE method ONLY)
TIMER
For APT-8S
TIMER METHOD
CHANGE TO THE PROGRAM MODE
DAY
PULSE
For APT-9S
MO
ON
ON
SE T
TIMER SETTING
OFF
DAY
HR
MAN
SU MO TU WE TH FR SA
SE T
SET HOUR
HR
MIN
CLEAR
TU
TU
TU
OFF
SE T
OFF
SE T
SET MINUTE
PROG.
TU
ON
SE T
SET WEEKDAY
SET HOUR
MIN
TU
ON
OFF
SE T
SET MINUTE
TU
SE T
SET OFF TIME
START
MO
CLK
SE T
PROGRAM ENABLE OR DISABLE
NORMAL MODE
Setting example :
There is a machine needed to be turned on at 8:00 AM and to be turned off at 5:00 PM, from Monday to Friday.
In addition, the machine needed to be turned on at 9:00 AM to 11:00 AM every Saturday for inspection.
The correct setting display should be as follows.
ON
MO TU WE TH FR
SE T
AM
OFF
MO TU WE TH FR
ON
SE T
PM
SA
AM
OFF
AM
SE T
SA
SE T
TIMER
PULSE METHOD
SEC
PROG.
MAN
HR
SU MO TU WE TH FR SA
MO TU
For APT-9S
SE T
SE T
PULSE SETTING
SET PULSE WIDTH SECOND
MIN
ON
DAY
For APT-8S
PULSE
CLEAR
MO TU
SE T
SET MINUTE
ON
ON
MO
SE T
SET PROGRAM NUMBER
START
MO
MO TU
SE T
PROGRAM ENABLE OR DISABLE
NORMAL MODE
CLK
ON
DAY
SE T
SET WEEK
ON
SE T
SET HOUR
Setting example :
The factory has a buzz to remind workers their business hours, break time and etc. The buzz should be activated at
8:00, 12:00, 13:00, and 17:00 from Monday to Saturday. The buzz should be activated 10 seconds every time.
The correct setting display should be as follows.
MO TU WE TH FR SA
ON
SE T
ON
SE T
MO TU WE TH FR SA
ON
SE T
MO TU WE TH FR SA
ON
SE T
MO TU WE TH FR SA
SE T
MODE
4
HOLIDAY SUSPENSION MODE
CHANGE TO THE HOLIDAY SUSPENSION MODE
(You may skip this step and setup this function later.)
DAY
MO
MAN
SU MO TU WE TH FR SA
SE T
MO
SE T
HOLIDAY SETTING
Setting example :
START
TU
SET SUSPENSION START DAY
SET THE NUMBER OF DAYS
9 days holiday suspension
0:00
from Saturday
CLK
SE T
SA
FR
9 days
SA
SU
SA
SU
MO
SE T
NORMAL MODE
MODE
5
TWIN TIMER MODE
CHANGE TO THE TWIN TIMER MODE
(You may skip this step, if you do not need this function. Please be noticed, when twin timer function is enabled, the program will be disabled.)
min
min
sec
OFF
TMR
PROG.
UNIT OF SECOND
MAX. UNIT IS 99 MINUTES
59 SECONDS
OR
ON OFF
TWIN TIMER SETTING
ON
SE T
TMR
SET ON/OFF TIME
MIN
SEC
ON
HR
sec
UNIT OF MINUTE
MAX. UNIT IS 99 HOURS
59 MINUTES
CLEAR
ON
SE T
TMR
SET MINUTE
START
OFF
SE T
TMR
ON OFF
TMR
SET SECOND
SE T
TMR
SET HOUR
CLEAR TIME SETTING
TMR
START OR STOP COUNTDOWN
MODE
BACK TO THE CLOCK MODE
CONNECTION
When a time switch and load
power supply are separate.
POWER BACKUP FEATURE
When a time switch and load
power supply are the same.
N Type
N Type
PR O G R AM M AB L E T I M E R
PROGRAMMABLE TIMER
DAY
12/24H
HR
+1H
MIN
MAN
SEC
DAY
12/24H
HR
+1H
MIN
MAN
SEC
MODE
PROG.
START
CLEAR
MODE
PROG.
START
CLEAR
min
TIMER
OFF ON
PULSE
sec
BAT.
ON
GREEN
OFF
RED
min
TIMER
OFF ON
PULSE
sec
BAT.
RESET
ON
GREEN
OFF
RED
APT-9S
LOAD
Program
Power
failure
Output
PROGRAM OVERLAPPING TIMEING CHART
RESET
APT-9S
LOAD
BATTERY CHANGE
ᦾ
The timer retains clock operation and program
memory when external power fail. With external
power failure, the contact position will be held in
OFF position until the power is restored. (See right
chart) The program will stays ON regardless of the
external power failure. (When program setting
is ON) However, when external power is restored,
it also restores contact status.
Timer:
Pulse:
Holiday:
Program1
Program1
Program2
Program2
Program
Output
Output
Output
˧˻
˙̅
3 days
˦˴
˦̈
ˠ̂
CONVERT Y TYPE (Flush Mounting) TO N TYPE (Surface Mounting)
ᦿ
ᦾ
ᦿ
ᧀ
Lithium battery
CR2032
+
3 VOLTS
CONVERT N TYPE (Surface Mounting) TO Y TYPE (Flush Mounting)
ᦾ
ᦿ
ᧀ
ANLY ELECTRONICS CO., LTD.
http://www.anly.com.tw
ᧁ
M-APT9-B-D
Printed in Taiwan
Mounting Frame for H Series Relays
INGRAM
P R O D U C T S, I N C.
Part No. Y-50
This ratcheting adjustable mounting frame will
allow you to securely panel mount all H series
Ingram Products analog and digital timers.
Mounting Frame for the APT-9S
Part No. Y-70
This ratcheting adjustable mounting frame will
allow you to panel mount the APT-9S 7-Day
Programmable Timer securely and with ease.
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
ANLY TIMER
H3B-RC WIDE VOLTAGE MULTI-RANGE ANALOG TIMER
Stocked and distributed by Ingram Products, Inc.
CHARACTERISTIC :
Jacksonville, FL
ingramproducts.com
SPECIFICATION :
Wide operating voltage range, from AC/DC
24V~240V
4 time ranges, selectable via DIP switch:
6S, 60S, 6M, 60M
2 modes selectable via slide switch: Mode
A (2C) for DPDT time-limiting output
contacts and Mode B (1A1C) for SPDT
instantaneous and time-limiting output
contacts
UL, C-UL recognized and CE certified
Operating voltage
AC/DC(V): 24~240
Allowable operating
voltage range
85~110% of rated operating voltage
Rated frequency
50 / 60 Hz
Contact rating
250VAC 5A (resistive load)
Reset time
MAX 0.1S
Power consumption
Approx. 2VA
Life
Mechanical: 5,000,000 times
Electrical:
100,000 times
Ambient temperature
-10 ~ +50
Ambient humidity
MAX 85%RH
Weight
Approx. 115g
P ro d u ct is s ubjec t t o c hange w it hout not ic e.
A 31
CONNECTION :
2C, Mode A
1A1C, Mode B
4
4
6
3
2
7
2
1
A
5
3
8
6
7
1
B
A
MODE
5
8
B
MODE
SOURCE
SOURCE
TIMING CHART :
2C, Mode A
1A1C, Mode B
Set Time
Rt Set Time
Set Time
SOURCE (2-7)
Rt Set Time
SOURCE (2-7)
N.C. (8-5)
N.C. (8-5)
N.O. (8-6)
N.O. (8-6)
N.C. (1-4)
N.C. (1-4)
N.O. (1-3)
N.O. (1-3)
LAMP
LAMP
Rt:Reseting time
Rt:Reseting time
DIMENSIONS : (mm)
N type(Surface Mounting): Using P2CF-08 Socket or PF085A Socket
45 +0.5
-0
Y type(Flush Mounting): Using Y50 Frame & US-08 Socket or P3G-08 Socket
45 +0.5
-0
ANLY ELECTRONICS CO., LTD.
http://www.anly.com.tw
TAIWAN MAIN OFFICE :
ANLY ELECTRONICS CO., LTD.
No.19, Lane 202, Fushou St., Shinjuang City, Taipei, Taiwan 242
TEL: +886-2-2996-3202 FAX: +886-2-2996-2017
MALAYSIA BRANCH :
JUSTY ELECTRONICS (M) SDN, BHD.
No.1, Jalan 6/89B, Kawasan Perindustrian Trisegi, Batu 3 1/2 Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia
TEL: +60-3-7983-5758
FAX: +60-3-7981-5052
HONG KONG BRANCH : ANLY ELECTRONICS (HK) LTD.
Flat K, 13/F, Edward Mansion, 141 Prince Edward Road W., Kowloon, Hong Kong
TEL: +852-2397-2505
FAX: +852-2397-6080
CHINA SALES OFFICE : ANLY TECHNOLOGY (WUXI) CO., LTD.
Room 5C, Zhaofeng Building, No.9, Alley 396, Changning Rd., Changning District, Shanghai, China 200042
TEL: +86-21-6213-9371 FAX: +86-21-6212-3483
NO. H3BR-D-A
ANLY TIMER
H3C-R MULTI-FUNCTION ANALOGUE TIMER
Stocked and distributed by Ingram Products Inc.
CHARACTERISTICS :
Jacksonville, FL
ingramproduct
SPECIFICATION :
Wide operating voltage range in a single
unit, AC/DC 24V~240V
8 field-selectable output modes for various
applications
14 field-selectable time range, from 0.2
second to 300 hour
Includes 2C output contacts, instantaneous
output contact, flicker and interval modes
Short body design, about 68 mm
Adapter Y-57 for different flush mount
UL, C-UL recognized and CE certified
Operating voltage
AC/DC(V): 24~240
Allowable operating
voltage range
85~110% of rated operating voltage
Rated frequency
50 / 60 Hz
Contact rating
250VAC 5A (resistive load)
Reset time
MAX 0.1s
Power consumption
Approx. 3VA
Life
Mechanical: 5,000,000 times
Electrical:
100,000 times
O
Ambient temperature -10 ~ +50 C
Ambient humidity
MAX 85%RH
Weight
Approx. 100g
TYPE SELECTION :
Type
Time range
Output contact
H3C-R
1.2s / 3s / 12s / 30s / 1.2m / 3m / 12m / 30m / 1.2h / 3h / 12h / 30h / 120h / 300h
2C or 1A1C
External Reset
----
External Start
----
External Gate
H3C-R11
---P roduc t is s ubjec t t o c hange w it hout not ic e.
2C(1A1C) + G Type
CONNECTION :
H3C-R11
H3C-R
1
5 6 7
4
8
9
3
2
10
1 11
GATE
7
START
6
2
RESET
5
4
3
8
SOURCE
SOURCE
TIMING CHART :
H3C-R11
H3C-R
Output mode
A : ON delay(2C)
t
Rt
t
Rt
t-a
SOURCE (2-7)
SOURCE (2-10)
N.C. (1-4, 8-5)
Start signal (2-6)
N.O. (1-3, 8-6)
Output LED
Power LED
N.C. (1-4, 11-8)
t
t
t
t
Reset (2-7)
N.O. (1-3, 11-9)
Output LED
Power LED
Set time = t , t - a < t , Reset time = Rt
Output mode
A 4 : ON delay(1A1C)
t
Rt
t
Rt
t-a
SOURCE (2-7)
SOURCE (2-10)
N.C. (8-5)
Start signal (2-6)
N.O. (8-6)
Output LED
N.C. (1-4)
Reset (2-7)
N.O. (1-3)
N.O. (11-9)
Output LED
N.C. (1-4)
N.C. (11-8)
Power LED
N.O. (1-3)
Set time = t , t - a < t , Reset time = Rt
Output mode
Power LED
B : Repeat cycle OFF start(2C)
t
t
t-a
Rt
t
t
t
SOURCE (2-7)
SOURCE (2-10)
N.C. (1-4, 8-5)
Start signal (2-6)
N.O. (1-3, 8-6)
Output LED
Power LED
N.C. (1-4, 11-8)
t
t
t-a
t
t
t
t
t
t-a
t
t
t
Reset (2-7)
N.O. (1-3, 11-9)
Output LED
Power LED
Set time = t , t - a < t , Reset time = Rt
Output mode
B 3 : Repeat cycle ON start(1A1C)
t
t
t-a
Rt
t
t
t
SOURCE (2-7)
SOURCE (2-10)
N.C. (8-5)
Start signal (2-6)
N.O. (8-6)
Output LED
N.C. (1-4)
Reset (2-7)
N.O. (1-3)
N.O. (11-9)
Output LED
N.C. (1-4)
N.C. (11-8)
Power LED
N.O. (1-3)
S t ti
t t
t R
t ti
Rt
P
LED
H3C-R11
H3C-R
Output mode
t
B 4 : Repeat one shot output(1A1C)
0.6s
t
0.6s t - a
Rt
0.6s
t
t
0.6s
0.6s
t
SOURCE (2-7)
SOURCE (2-10)
N.C. (8-5)
Start signal (2-6)
N.O. (8-6)
Output LED
N.C. (1-4)
Reset (2-7)
N.O. (1-3)
N.O. (11-9)
Output LED
N.C. (1-4)
t
0.6s t - a
t
t-a
t
0.6s
t
0.6s
N.C. (11-8)
Power LED
N.O. (1-3)
Power LED
Set time = t , t - a < t , Reset time = Rt
Output mode
C : Signal ON/OFF delay(2C)
t
Rt
t
Rt
t-a
t
SOURCE (2-7)
SOURCE (2-10)
N.C. (1-4, 8-5)
Start signal (2-6)
N.O. (1-3, 8-6)
Output LED
Power LED
N.C. (1-4, 11-8)
t
t-a
t-a
t
Reset (2-7)
N.O. (1-3, 11-9)
Output LED
Power LED
Set time = t , t - a < t , Reset time = Rt
Output mode
E : Interval(1A1C)
t
Rt
t
Rt
t-a
t
SOURCE (2-7)
SOURCE (2-10)
N.C. (8-5)
Start signal (2-6)
N.O. (8-6)
Output LED
N.C. (1-4)
Reset (2-7)
N.O. (1-3)
N.O. (11-9)
Output LED
N.C. (1-4)
t
t
t-a
N.C. (11-8)
Power LED
N.O. (1-3)
Power LED
Set time = t , t - a < t , Reset time = Rt
Output mode J : One shot output(1A1C)
t
Rt
t
Rt
t-a
SOURCE (2-7)
t
t-a
t-a
t
SOURCE (2-10)
N.C. (8-5)
Start signal (2-6)
0.5s
0.5s
N.O. (8-6)
Output LED
N.C. (1-4)
Reset (2-7)
N.O. (1-3)
N.O. (11-9)
Output LED
N.C. (1-4)
N.C. (11-8)
0.5s
Power LED
N.O. (1-3)
Power LED
Set time = t , t - a < t , Reset time = Rt
Application of Gate terminal :
t1
SOURCE (2-10)
Start signal (2-6)
Gate (2-5)
Reset (2-7)
N.C. (11-8)
N.O. (11-9)
Output LED
Power LED
Set time = t = t1 + t2 , t - a < t
t2
t-a
0.5s
t-a
t
DIMENSIONS : (mm)
45
48
36.7
48
45
N type(Surface Mounting): Using P2CF-08 , PF085A Socket or
PF113A Socket(for H3C-R11 use only)
9
45
48
14.2
52
6.5
Y type(Flush Mounting): Using Y50 Frame & US-08 Socket , P3G-08 Socket
51
9
37
35.7
45 +0.5
-0
45
13
15
6.5
30
48
48
36.7
48
Ø 3.3 X 2
45 +0.5
-0
59
ANLY ELECTRONICS CO., LTD.
http://www.anly.com.tw
TAIWAN MAIN OFFICE :
ANLY ELECTRONICS CO., LTD.
No.19, Lane 202, Fushou St., Shinjuang City, Taipei, Taiwan 242
TEL: +886-2-2996-3202 FAX: +886-2-2996-2017
MALAYSIA BRANCH :
JUSTY ELECTRONICS (M) SDN, BHD.
No.1, Jalan 6/89B, Kawasan Perindustrian Trisegi, Batu 3 1/2 Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia
TEL: +60-3-7983-5758
FAX: +60-3-7981-5052
HONG KONG BRANCH : ANLY ELECTRONICS (HK) LTD.
Flat K, 13/F, Edward Mansion, 141 Prince Edward Road W., Kowloon, Hong Kong
TEL: +852-2397-2505
FAX: +852-2397-6080
CHINA SALES OFFICE : ANLY TECHNOLOGY (WUXI) CO., LTD.
Room 3D, Zhaofeng Building, No.9, Alley 396, Changning Rd., Changning District, Shanghai, China 200042
TEL: +86-21-6213-9371 FAX: +86-21-6212-3483
ANLY TIMER
H5CLRMULTI-FUNCTION DIGITAL TIMER
CHARACTERISTICS :
SPECIFICATION :
Eleven field-selectable output modes
accommodate a wide variety of applications
7-segment-display for clear display and
effective monitoring
All parameters set by scrollthrough menus
accessed from the front panel
Field-selectable time ranges from 0.001
second to 9999 hours
Precision control possible to 0.001 second
Four levels of key protection provided
Count Up or Count Down mode user selectable
Memory function available
UL, C-UL recognized and CE certified
Operating voltage
AC/DC(V): 12~48 or 100~240
Allowable operating
voltage range
85~110% of rated operating voltage
Rated frequency
50 / 60 Hz
Contact rating
250VAC 5A (resistive load)
Reset time
MAX 0.1s
Reset time
Approx. 2.5VA
Life
Mechanical: 5,000,000 times
Electrical:
100,000 times
Ambient temperature -10 ~ +50
Ambient humidity
MAX 85%RH
Weight
Approx. 120g
TYPE SELECTION :
Type
Time range
Output contact
9.999s / 99.99s / 999.9s / 9999s / 999.9m / 9999m / 999.9h / 9999h / 99m59s / 99h59m
Memory
External Reset
External Start
H5CLR-11
2C(1A1C) + G Type
P r odu c t i s s u b j e c t t o c h a n g e w i t h o u t n o t i c e .
A33
CONNECTION :
START
RESET
5 6 7
4
8
9
3
2
10
1 11
T.D. INST.
SOURCE
TIMING CHART :
Output mode A : Signal ON delay 1 (Timer resets when power comes ON.)
Timing starts when the start signal goes ON.
SOURCE
Start signal
Gate
Reset
t
t
Control output
Set value
UP
0
Set value
DOWN
0
Output mode
While the start signal is ON, the timer starts
when the power comes ON or when the reset
input goes OFF.
The control output is controlled using a
sustained or one-shot time period.
A-1 : Signal ON delay 2 (Timer resets when power comes ON.)
Timing starts when the start signal goes ON,
and is reset when the start signal goes OFF.
SOURCE
Start signal
Gate
Reset
While the start signal is ON, the timer starts
when the power comes ON or when the reset
input goes OFF.
t
Control output
Set value
UP
The control output is controlled using a
sustained or one-shot time period.
0
Set value
DOWN
0
Output mode
A-2 : Power ON delay 1 (Timer resets when power comes ON.)
Timing starts when the reset input goes OFF.
SOURCE
Start signal
The start signal disables the timing function (
ie., same function as the gate input).
Gate
Reset
t
The control output is controlled using a
sustained or one-shot time period.
Control output
Set value
UP
0
Set value
DOWN
0
Output mode
A-3 : Power ON delay 2 (Timer dose not reset when power comes ON.)
Timing starts when the reset input goes OFF.
SOURCE
Start signal
The start signal disables the timing function (
ie., same function as the gate input).
Gate
Reset
Control output
Set value
UP
0
Set value
DOWN
0
t
t
a
t-a
The control output is controlled using a
sustained or one-shot time period.
Output mode
SOURCE
Start signal
Gate
B : Repeat cycle 1 (Timer resets when power comes ON.)
Timing starts when the start signal goes ON.
The status of the control output is reversed
when time is up (OFF at start).
Reset
Control output
Set value
UP
0
Set value
DOWN
0
Output mode
SOURCE
Start signal
Gate
While the start signal is ON, the timer starts
when the power comes ON or when the reset
input goes OFF.
B-1 : Repeat cycle 2 (Timer dose not reset when power comes ON.)
Timing starts when the start signal goes ON.
The status of the control output is reversed
when time is up (OFF at start).
Reset
Control output
Set value
UP
0
Set value
DOWN
0
Output mode
SOURCE
Start signal
Reset
Control output
Set value
UP
0
Set value
DOWN
While the start signal is ON, the timer starts
when the power comes ON or when the reset
input goes OFF.
B-2 : Repeat cycle ON start (Timer resets when power comes ON.)
Timing starts when the start signal goes ON.
The status of the control output is reversed
when time is up (OFF at start).
While the start signal is ON, the timer starts
when the power comes ON or when the reset
input goes OFF.
0
Output mode
SOURCE
Start signal
Reset
Control output
Set value
UP
0
Set value
DOWN
0
Output mode
SOURCE
Start signal
Gate
Reset
Control output
Set value
UP
0
Set value
DOWN
0
C : Signal ON/OFF delay (Timer resets when power comes ON.)
Timing starts when the start signal goes ON
or OFF.
The status of the control output is ON when
the start signal goes ON or OFF.
D : Signal OFF delay (Timer resets when power comes ON.)
The control output is ON when the start signal
is ON(except when the power is OFF or the
reset is ON).
The timer is reset when the time is up.
Output mode
E : Interval (Timer resets when power comes ON.)
Timing starts when the start signal comes ON.
SOURCE
Start signal
The control output is reset when time is up.
Gate
While the start signal is ON, the timer starts
when power comes ON or when the reset input
goes OFF.
Reset
Control output
Set value
UP
0
Set value
DOWN
0
Output mode
F : Cumulative (Timer does not reset when power comes ON.)
Start signal enables timing (timing is stopped
when the start signal is OFF or when the
power is OFF)
SOURCE
Start signal
Gate
Reset
A sustained control output is used.
Control output
Set value
UP
0
Set value
DOWN
0
DIMENSIONS : (mm)
N type(Surface Mounting): Using PF113A or PF113A-E Socket
H5CLR
RUN
OUT
K/P
h
m
s
RESET
START
GATE
RESET
Y type(Flush Mounting): Using Y50 Frame & P3G-11 Socket
H5CLR
45 +0.5
-0
RUN
OUT
K/P
h
m
s
RESET
START
GATE
RESET
45 +0.5
-0
ANLY ELECTRONICS CO., LTD.
http://www.anly.com.tw
TAIWAN MAIN OFFICE :
ANLY ELECTRONICS CO., LTD.
No.19, Lane 202, Fushou St., Shinjuang City, Taipei, Taiwan 242
TEL: +886-2-2996-3202 FAX: +886-2-2996-2017
MALAYSIA BRANCH :
JUSTY ELECTRONICS (M) SDN, BHD.
No.1, Jalan 6/89B, Kawasan Perindustrian Trisegi, Batu 3 1/2 Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia
TEL: +60-3-7983-5758
FAX: +60-3-7981-5052
HONG KONG BRANCH : ANLY ELECTRONICS (HK) LTD.
Flat K, 13/F, Edward Mansion, 141 Prince Edward Road W., Kowloon, Hong Kong
TEL: +852-2397-2505
FAX: +852-2397-6080
CHINA SALES OFFICE : ANLY TECHNOLOGY (WUXI) CO., LTD.
Room 13G, No.831, Xinzha Rd., Jingan District, Shanghai, China 200041
TEL: +86-21-6218-3300 FAX: +86-21-6217-5911
NO. H5CLR11-F-A
H5CLR-11
SAFETY PRECAUTION This manual uses the following symbols to ensure safe operation of this timer.
MULTI-FUNCTION DIGITAL TIMER
User's Manual
WARNING
CAUTION
Warnings are indicated when mishandling this product might result in death or serious injury
to user.
Cautions are indicated when mishandling this product might result in minor injury to the user,
or only physical damage to the timer.
WARNING
RESTRICTIONS ON USE
ΘNote this incorrect wiring of this product can damage it and lead to other hazards. Make sure the product has
been correctly wired before turning the power ON.
ΘBefore wiring, or removing / mounting the product, be sure to turn the power OFF. Failure to do so might cause
electric shock.
ΘDo not touch electrically charged parts such as the power terminals. Doing so might cause electric shock.
ΘDo not disassemble the product. Doing so might cause electric shock or faulty operation.
When using this product in applications
that require particular safety or when
using this product in important facilities,
please pay attention to the safety of the
overall system and equipment. Install failsafe mechanisms, perform redundancy
checks and periodic inspections and
adopt other appropriate safety measures
when it is necessary.
CAUTION
ΘUse the product within the operating ranges recommended in the specification (temperature, humidity, voltage,
shock, mounting direction, atmosphere and etc.). Failure to do so might cause fire or faulty operation.
ΘFirmly tighten the wires to the socket. Insufficient tightening of the wires to the socket might cause fire.
SPECIFICATIONS
NAMES AND FUNCTIONS OF FACEPLATE
Operating voltage
AC/DC : 12Д48V / AC/DC : 100Д240V
Allowable operating
voltage range
85 ~ 110% of rated operating voltage
Rated frequency
50 / 60Hz
Contact rating
250VAC 5A (Resistive load)
Reset time
MAX 0.1s
LEDs
Power consumption
Approx. 2.5VA
Life
Mechanical : 5,000,000 times / Electrical : 100,000 times
RUN: Timing indicator
OUT: Control output indicator
K/P: Key protection indicator
RESET: Reset indicator
START: Start indicator
GATE: Gate indicator
h: Time unit display (Hour)
m: Time unit display (Minute)
s: Time unit display (Second)
Ambient temperature -10Д+50°C
RESET
Ambient humidity
MAX 85% RH
Weight
Approx. 120g
Upper display
Display PV values (current time, etc.) or
setup items.
H5CLR
RUN
OUT
K/P
Lower display
Display SV values (set time, etc.) and
other parameter values.
h
m
s
RESET
START
GATE
key :
Performing arithmetic shift operations and
switches the display. Hold down for at least
3 seconds to enter setting modes.
RESET
key :
key :
Reset the output or save the value
of setting.(after save than back to
the operation mode)
Used for incrementing or decrementing
numeric values.
SETTING PROCEDURE
POWER ON
RESET
or
Reset
OUTPUT TIME
SPECIAL FUNCTION KEY
PRESS FOR 3s
PRESS FOR 3s
RESET
Switch ON / OFF Key
Switch to input setting mode
protection
(1)Stop
PRESS
FOR 3s
Switch to input setting mode
(2)Timing
or
PRESS
RESET
FOR 3s
Switch to input setting mode
TIME RANGE
Select
output time
Hold
0.1s
0.5s
1s
5s
10s
15s
20s
ϡ Not functionable on MODE C,D,E and F
Switch to input signal
time setting mode
or
RESET
Save and back to the
operation mode
or
RESET
Save and back to the
operation mode
INPUT SIGNAL TIME
Select the
time range
9.999s
99.99s
999.9s
9999s
Switch to count up/down
setting mode
999.9m
9999m
999.9h
9999h
or
RESET
99m59s
99h59m
20ms
1ms
Select input
signal time
Save and back to the
operation mode
Switch to key protection level
setting mode
KEY PROTECTION LEVEL
UP / DOWN MODE
Select count up
or count down
Count up
Count down
Switch to output
setting mode
or
Select key
protection level
RESET
Save and back to the
operation mode
Mode B
Mode B1
Mode B2
Mode C
Mode D
Mode E
Mode F
Mode A
Mode A1
Mode A2
Mode A3
See reverse page for more details
Switch to output time
setting mode
Switch to output contact
setting mode
or
RESET
Save and back to the
operation mode
or
RESET
Save and back to the
operation mode
OUTPUT CONTACT
OUTPUT MODE
Select
output mode
Lock function key
Lock reset key RESET
Lock preset value key
Lock all key
or
RESET
Save and back to the
operation mode
Stocked and distributed by Ingram Products Inc.
2C
1A1C
Select output
contact
Switch to time range
setting mode
Jacksonville, FL
Product i s s ubjec t t o c hange w it hout not ic e.
ingramproducts.com
TIMING CHART(Output mode)
A : Signal ON delay 1
(Timer resets when power comes ON.)
B : Repeat cycle 1
D : Signal OFF delay
(Timer resets when power comes ON.)
SOURCE
SOURCE
SOURCE
Start signal
Start signal
Start signal
Gate
Gate
Gate
Reset
Reset
Reset
t
t
Control output
Set value
Control output
Set value
Control output
Set value
UP
UP
UP
0
Set value
0
Set value
0
Set value
DOWN
DOWN
DOWN
0
0
Timing starts when the start signal goes ON. *Note1
The control output is controlled using a sustained or
one-shot time period.
A-1 : Signal ON delay 2
0
Timing starts when the start signal goes ON. *Note1
The status of the control output is reversed when time is up
(OFF at start).
(Timer resets when power comes ON.)
B-1 : Repeat cycle 2
(Timer dose not reset when power comes ON.)
The control output is ON when the start signal is ON
(except when the power is OFF or the reset is ON).
The timer is reset when the time is up.
E : Interval
SOURCE
SOURCE
SOURCE
Start signal
Start signal
Start signal
Gate
Gate
Gate
Reset
Reset
Reset
t
Control output
Set value
Control output
Set value
Control output
Set value
UP
UP
UP
0
Set value
DOWN
DOWN
0
0
0
Timing starts when the start signal goes ON, and is reset
when the start signal goes OFF. *Note1
The control output is controlled using a sustained or oneshot time period.
A-2 : Power ON delay 1
(Timer resets when power comes ON.)
Timing starts when the start signal goes ON. *Note1
The status of the control output is reversed when time is up
(OFF at start).
B-2 : Repeat cycle ON start
(Timer resets when power comes ON.)
Timing starts when the start signal comes ON. *Note1
The control output is reset when time is up.
F : Cumulative
SOURCE
SOURCE
SOURCE
Start signal
Start signal
Start signal
Gate
Reset
Gate
Control output
Set value
UP
0
Set value
DOWN
0
Reset
t
Control output
Set value
UP
0
Set value
DOWN
0
Timing starts when the reset input goes OFF.
The start signal disables the timing function (ie., same
function as the gate input).
The control output is controlled using a sustained or
one-shot time period.
A-3 : Power ON delay 2
(Timer dose not reset when power comes ON.)
SOURCE
Start signal
Gate
0
Set value
C : Signal ON/OFF delay
SOURCE
Reset
Control output
Set value
UP
Timing starts when the start signal goes ON. *Note1
The status of the control output is reversed when time
is up (OFF at start).
Start signal
(Timer does not reset when power comes ON.)
DOWN
0
Start signal enables timing (timing is stopped when the start
signal is OFF or when the power is OFF)
A sustained control output is used.
(Timer resets when power comes ON.)
Reset
t
t
a
t-a
Control output
Set value
UP
0
Set value
DOWN
0
Timing starts when the reset input goes OFF.
The start signal disables the timing function (ie., same
function as the gate input).
The control output is controlled using a sustained or
one-shot time period.
Control output
Set value
UP
0
Set value
DOWN
0
Timing starts when the start signal goes ON or OFF.
The status of the control output is ON when the start
signal goes ON or OFF.
*Note1. While the start signal is ON, the timer starts when power
comes ON or when the reset input goes OFF.
CONNECTION
START
DIMENSION(mm)
RESET
H5CLR
5 6 7
4
8
9
3
2
10
1 11
RUN
OUT
K/P
h
m
s
RESET
START
GATE
45 +0.5
-0
Reset
(Timer resets when power comes ON.)
0
Set value
0
Set value
DOWN
(Timer resets when power comes ON.)
RESET
45 +0.5
-0
T.D. INST.
SOURCE
ANLY ELECTRONICS CO., LTD.
http://www.anly.com.tw
M-H5CLR11-F-A
Printed in Taiwan
INGRAM
AC or DC Hour Meter
P R O D U C T S, I N C.
Part No. :HRM1248ADRSS, HRM90230ACRSS
Provides precise tamper proof record of operating
time of engines and other electromechanical
devices. It mounts in standard 2" opening or 1.5"
knock out. Typical use is to monitor running time
for vehicles and machinery for maintenance
scheduling, warranty, rental use and service
records. Locking snap-on retainer secures meter
firmly to panel.
Features
Hermetically sealed to keep out dirt
and corrosive gases
6 digit display
Low power consumption
No battery needed
Accurate quartz crystal oscillator
Solid state drive circuits
Shock resistant to 8g
Wide temperature range
1/4" Quick Connect terminals
.300"
Technical Specifications
Voltage:
12-48V DC/AC - HRM1248ADRSS
120-230VAC (50-60Hz) - HRM90230ACRSS
Power consumption:
10 mA @ 12VDC
5 mA @ 48VDC
250mA @ 120VAC (Avg.)
Shock Operating: 8 G (10-75HZ 1-8 G)
Accuracy: +1 Minute per 24 hours
Operating Temp: -25°C - 65°C
Fits 2.00" diameter hole or 1.5" Knock Out
UL Recognized Component
1.285"
1.
95
0"
HOURMETER
2.270"
1.693"
0 0 0 0 0 0
HOURS
1
10
QUARTZ
.479"
Snap on Retainer
Front
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
1.535"
Side
888-875-2221 ph
(904)778-2444 fax
Rear
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
AC or DC Hour Meter
P R O D U C T S, I N C.
Part No. :HRM1248ADRRP, HRM90230ACRRP
Provides precise tamper proof record of operating
time of engines and other electromechanical
devices. It mounts in 1.45" x .95" cut out. Typical
use is to monitor running time for vehicles and
machinery for maintenance scheduling, warranty,
rental use and service records. Locking snap-on
retainer secures meter firmly to panel.
Features
Hermetically sealed to keep out dirt
and corrosive gases
6 digit display
Low power consumption
No battery needed
Accurate quartz crystal oscillator
Solid state drive circuit
Shock resistant to 8g
Wide temperature range
1/4" Quick connect terminals
.190"
1.772"
1.248"
Technical Specifications
Voltage:
12-48V DC/AC - HRM1248ADRRP
120-230VAC (50-60 Hz) - HRM90230ACRRP
Power consumption:
2 mA @ 12VDC
10 mA @ 48VDC
350mA @ 120VAC (Avg.)
Shock Operating: 8 G (10-75HZ 1-8 G)
Accuracy: +1 Minute per 24 hours
Operating Temp: -25°C - 65°
Panel cut out: 1.45" x .95"
UL Recognized Component
2.155"
1.436"
.933"
0 0 0 0 0 0
HOURS
1/10
Snap on Retainer
Front
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
Side
888-875-2221 ph
(904)778-2444 fax
Rear
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
AC or DC Hour Meter
P R O D U C T S, I N C.
Part No. :HRM1248ADRRSP, HRM90230ACRRSP
Provides precise tamper proof record of operating
time of engines and other electromechanical
devices. It mounts in 1.45" x .95" cut out. Typical
use is to monitor running time for vehicles and
machinery for maintenance scheduling, warranty,
rental use and service records. Convenient screw
mount. Also includes snap-on retainer mount.
Features
Hermetically sealed to keep out dirt
and corrosive gases
6 digit display
Low power consumption
No battery needed
Accurate quartz crystal oscillator
Solid state drive circuit
Shock resistant to 8g
1/4" Quick Connect terminals
2.326
Technical Specifications
Voltage:
12-48V DC/AC - HRM1248ADRRSP
120-230VAC (50-60Hz) - HRM90230ACRRSP
Power consumption:
2 mA @ 12VDC
10 mA @ 48VDC
350mA @ 120VAC (Avg.)
Shock Operating: 8 G (10-75HZ 1-8 G)
Accuracy: +1 Minute per 24 hours
Operating Temp: -25°C - 65°
Panel cutout: 1.45" x .95"
UL Recognized Component
.190
1.402
.921
1.248
HOURS
1/10
Ø .150
Front
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
1.750
2.155
Side
888-875-2221 ph
(904)778-2444 fax
Rear
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Spa Alert
P R O D U C T S, I N C.
Part No: AVPW120CXFTRP
The Ingram Spa Alert uses a super bright LED and
95 dB audible piezo alarm to alert you of a
problem. The unit is equipped with a two position
key operated switch that can be used to silence
the alarm after it has been activated. The Spa
Alarm is Nema 4X rated to withstand harsh
outdoor conditions. Nema 4X means the unit is
water tight and hose down proof.
PHOTO COMING SOON
Alarm Includes
1 ea PW120A- piezo buzzer (red)
1 ea SB120AC - LED (red)
1 ea Silence Switch - 2 position key operated
selector switch
Mounting hardware for box not included
Features
UL Type 4X box with external mounting feet
UL Type 4X super bright LED (E121431)
UL Type 4X piezo buzzer (E175530)
LED provides 360 degree visibility
LED - 2 operation modes: steady on and flash
Piezo - solid state construction for reliability
Piezo - low power consumption
Piezo has a distinctive tone that cuts through
ambient noise
Technical Specifications
LED
Part No. SB120AC (red)
Voltage: 120VAC
Current Draw: 150mA
Flashes per Minute: 60
Piezo
Part No. PW120A (red)
Voltage: 120VAC
Current Draw: 40mA
Sound Output: 80dB min @ 2 feet
Resonant frequency 2.9 + 0.5kHz
Unit
Part No. AVPW120CXFTRP
Total Current: 190mA
FIELD CONNECTIONS
120VAC SUPPLY POWER
HOT
NEUTRAL
Ø 3/16"
120VAC ALARM SIGNAL
SunBurst
SB120AC
7 23/64"
RDY
Ready
MUTE
4 5/8"
Silence
5 3/16"
Red
White
Blue
2 1/8"
Piezo
Warbler
PW120A
4 3/8"
4"
5"
5"
022806
8725 Youngerman Court, Ste 206, Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Counter
P R O D U C T S, I N C.
Part No. :MC-01
Heavy duty industrial grade mountable counter.
Counts to 99999 with easy reset. Spring loaded
actuator arm.
Features
5 digit display
Reliable return to zero
Long service life
Wide temperature range
Technical Specifications
Service life: 1 million
Service temperature: -10°C - +65°C
Return to zero mode: Wind to reset
.793"
Reset Knob
0 0 0 0 0
1.403"
.977"
2.465"
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
Hand Held Counter
P R O D U C T S, I N C.
Part No. :HHC4
Rugged contruction for industrial or outdoor sports
tally. counts to 9999 with easy reset function.
Features
4 digit display
Reliable return to zero
Long service life
Wide temperature range
Light weight
Chrom plated
Technical Specifications
Service life: 1 million
Service temperature: -10°C - +65°C
Return to zero mode: Wind to reset
Reset Knob
1.811"
0 000
1.165"
8725 Youngerman Ct. Ste 206 Jacksonville, FL 32244
.480"
888-875-2221 ph
(904)778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
INGRAM
GFCI Safety Outlet
P R O D U C T S, I N C.
Part No. EH-04
GFCI (Ground Fault Circuit Interrupter) receptacles
can prevent serious injury by monitoring the
balance of current flow in a circuit. When a ground
fault is detected, such as when a person touches a
defective appliance that is "hot" due to defective
wiring or other problem, the GFCI will immediately
detect the condition and cut off electric power to
the outlet. The device can then be reset, providing
continuous protection against fatal electrical shock.
The National Electrical Code now requires Ground
Fault protection for outlets servicing countertops,
wet/damp locations and all new residential
construction.
Features
Duplex receptacle
Reset button restores outlet power
Test button for monthly testing
Fail safe operation, will not operate
when mis-wired
Improved resistance to surge and corrosion.
Wires can be installed from the side or back.
LED indicators:
green indicates proper operation
red indicates end-of-life
Comes with wall cover plate, mounting
hardware and complete installation and
troubleshooting instructions.
Service
Panel
LINE
LINE
LINE
A
B
C
Technical Specifications
Voltage: 120VAC - 60Hz
Current: Up to 15 Amps
UL Listed - E253345
Three prong outlet accepts 2 or 3 prong 15A plugs
Provides protection to downstream "load"
receptacles
See reverse side for handy troubleshooting tips.
1 5/16"
1 9/16"
RESET
RESET
RESET
TEST
TEST
TEST
4 1/8"
3 13/16"
1 5/8"
RESET
TEST
2 11/16"
3 1/4"
LOAD
LOAD
LOAD
A single GFCI receptacle installed in location A will provide
protection for receptacles A, B and C.
1/4"
15/16"
Installed in location B - it will protect B and C.
Dimensions
Installed in location C - only C will be protected.
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Troubleshooting Chart
Symptom
Cause
Pushing Test
Button Does
Not Pop Out
Reset Button.
Reset won't
stay in when
pushed.
Reset button
is out.
Outlet still
functions.
Reset button
is in. Outlet
does not
function.
Reset button
pops out when
device
plugged into
socket is
turned on.
_
_
Yes
Yes
_
_
Ground fault
downstream.
_
Yes
Line and load
reversed.
_
Since
2003
Other
miswiring of
GFCI
_
Yes
_
Yes
Yes
120 Volts not
reaching GFCI
Yes
Since
2003
_
Yes
_
Reset button
not pushed in
well enough
Yes
Yes
_
_
_
Defective
GFCI
Yes
Rare
_
Yes
_
INGRAM
GFCI Safety Outlet
P R O D U C T S, I N C.
Part No. EH-05
GFCI (Ground Fault Circuit Interrupter) receptacles
can prevent serious injury by monitoring the
balance of current flow in a circuit. When a ground
fault is detected, such as when a person touches a
defective appliance that is "hot" due to defective
wiring or other problem, the GFCI will immediately
detect the condition and cut off electric power to
the outlet. The device can then be reset, providing
continuous protection against fatal electrical shock.
The National Electrical Code now requires Ground
Fault protection for outlets servicing countertops,
wet/damp locations and all new residential
construction.
Features
Duplex receptacle
Reset button restores outlet power
Test button for monthly testing
Fail safe operation, will not operate
when mis-wired
Improved resistance to surge and corrosion.
Wires can be installed from the side or back.
Two LED indicators:
one green to indicate proper operation
one red to indicate end-of-life
Comes with wall cover plate, mounting
hardware and complete installation and
troubleshooting instructions.
LINE
LINE
LINE
A
B
C
Technical Specifications
Voltage: 120VAC - 60Hz
Current: Up to 20 Amps
UL Listed - E253345
Three prong outlet accepts 2 or 3 prong
15A & 20 A plugs
Provides protection to downstream "load"
receptacles
See reverse side for handy troubleshooting tips.
1 5/16"
Service
Panel
1 9/16"
RESET
RESET
RESET
TEST
TEST
TEST
4 1/8"
3 13/16"
1 5/8"
RESET
TEST
2 11/16"
3 1/4"
LOAD
LOAD
LOAD
A single GFCI receptacle installed in location A will provide
protection for receptacles A, B and C.
1/4"
15/16"
Installed in location B - it will protect B and C.
Installed in location C - only C will be protected.
8725 Youngerman Court Suite 206 Jacksonville, FL 32244
888-875-2221 ph
Dimensions
(904) 778-2444 fax
Website:www.ingramproducts.com
e-mail: [email protected]
Troubleshooting Chart
Symptom
Cause
Pushing Test
Button Does
Not Pop Out
Reset Button.
Reset won't
stay in when
pushed.
Reset button
is out.
Outlet still
functions.
Reset button
is in. Outlet
does not
function.
Reset button
pops out when
device
plugged into
socket is
turned on.
_
_
Yes
Yes
_
_
Ground fault
downstream.
_
Yes
Line and load
reversed.
_
Since
2003
Other
miswiring of
GFCI
_
Yes
_
Yes
Yes
120 Volts not
reaching GFCI
Yes
Since
2003
_
Yes
_
Reset button
not pushed in
well enough
Yes
Yes
_
_
_
Defective
GFCI
Yes
Rare
_
Yes
_
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement