Model: PURY-HP144TSKMU-A-H
Model:
PUR Y-HP144TSKMU-A-H
(Consists of Two PUR Y-HP72TKMU-A and One CMY-R 100C BK2 Twinning Kit)
Job Name:
Location:
Engineer Name:
Contractor:
System No.:
Date:
OUTDOOR VRF SYSTEM FEATURES
• Innovative flash technology enables tremendous
heating capacity at lower outdoor temperatures
• Built-in base pan heater to prevent ice in drain pan
• Air-source, simultaneous cooling and heating
• Provides up to 100% of rated heating capacity at
0ºF (-17.7ºC) in standard mode.
• Modular design; two small capacity units can be piped
together to form a large capacity system
• Connects to CITY MULTI indoor units
• Controlled via CITY MULTI Controls Network (CMCN)
• Minimum outdoor temperature for simultaneous cooling
and heating operation is -20ºC
• Inverter-driven (variable speed) scroll compressor
• External finish: Pre-coated Galvanized-steel Sheets
• Operating Temperature Range
Cooling (Outdoor): 23° ~ 115°F (-5° ~ 46°C) DB
Heating (Outdoor): -13° ~ 60°F (-25° ~ 15.5°C) WB
Specifications
Unit Type
Nominal Cooling Capacity
Btu/h
Nominal Heating Capacity
Btu/h
External Dimensions (H x W x D)
In. / mm
PURY-HP72TKMU-A-H
PURY-HP72TKMU-A-H
OPTIONAL PARTS
□
□
□
□
□
□
□
Twinning Kit*.……………….........………...….…..........CMY-R100CBK2
T-Branch Joint (≤ 72,000 Btu/h).…............…….…….CMY-Y102SS-G2
T-Branch Joint (73,000 - 144,000 Btu/h).…….……...........CMY-Y102LS-G2
T-Branch Joint (145,000 - 234,000 Btu/h).………........CMY-Y202S-G2
Joint Adapter (Port Connector > 54,000 Btu/h).….…….......CMY-R160C-J
Main BC Controller.…….......CMB-P108/1010/1013/1016NU-GA/1016NU-HA
Sub BC Controller.………………….....CMB-P104/108NU-GB/P1016NU-HB
* Twinning Kit is necessary to combine the refrigerant flows of the modules and is
sold separately.
System
PURY-HP144TSKMU-A-H
144,000
160,000
Refer to Module Data
Net Weight
Lbs. / kg
Electrical Power Requirements
Voltage, Phase, Hertz
Cooling Power Input
kW
10.85
Heating Power Input
Cooling Current (208/230V)
Heating Current (208/230V)
Minimum Circuit Ampacity
(MCA)**
kW
A
A
13.16
33.4 / 30.2
40.5 / 36.7
1,104/ 500
Module 1
PURY-HP72TKMU-A-H
72,000
80,000
64-31/32 x 48-1/16 x 29-5/32 /
1,650 x 1,220 x 740
552 / 250
Refer to Module Data**
Module 2
PURY-HP72TKMU-A-H
72,000
80,000
64-31/32 x 48-1/16 x 29-5/32 /
1,650 x 1,220 x 740
552/ 250
208 / 230V, 3-phase, 60Hz**
Refer to System Data
Refer to System Data
A
Refer to Module Data**
44 / 40**
44 / 40**
Maximum Circuit Breaker Size**
Piping Diameter
A
Refer to Module Data**
60**
60**
From Twinning Kit to Indoor Units
(Brazed) (In. / mm)
Liquid (High Pressure)
Gas (Low Pressure)
Liquid (High Pressure)
Gas (Low Pressure)
Total Capacity
Model / Quantity
From Modules to Twinning Kit
(Brazed) (In. / mm)
Indoor Unit
Sound Pressure Level
Fan
Type x Quantity
Airflow Rate
Direct-drive Inverter Motor Output
dB(A)
CFM
kW
Compressor Operating Range
Compressor Type x Quantity
Compressor Motor Output
kW
Compressor Crankcase Heater
kW
Refrigerant
Lubricant
High-pressure Protection Device
Compressor / Fan Protection Device
Inverter Protection Device
Refer to System Data
7/8 / 22.2
1-1/8 / 28.58
Refer to Module Data
5/8 / 15.88
3/4 / 19.05
50 to 150% of ODUs
P06 ~ P96 / 1 to 36
61
Refer to Module Data
Cooling: 15% to 100%
Heating: 7% to 100%
Refer to Module Data
Refer to Module Data
Refer to Module Data
5/8 / 15.88
3/4 / 19.05
Refer to System Data
58
58
Propeller Fan x 1
6,200
0.92
Propeller Fan x 1
6,200
0.92
Refer to System Data
Inverter-driven Scroll Hermetic x 1 Inverter-driven Scroll Hermetic x 1
5.3
5.3
R410A
MEL32
601 psi / 4.15 MPa
601 psi / 4.15 MPa
Overheat Protection / Thermal Switch Overheat Protection / Thermal Switch
Overheat / Overcurrent Protection Overheat / Overcurrent Protection
** Each individual module requires a separate electrical connection. Reference electrical data for each individual module.
Left view
1650 (64-31/32)
Intake
air
d
f
e
Intake
air
a
To BC controller
Twinning pipe(High pressure)
<optional parts>
b
To BC controller
Outdoor unit 2
1220 (48-1/16)
HP144
HP192
Unit model
Component
HP72
HP96
HP72
HP96
unit model
Twinning Kit High pressure c ø15.88(5/8) e ø15.88(5/8) c ø19.05(3/4) e ø19.05(3/4)
~Outdoor unit Low pressure d - (Note 5) f ø19.05(3/4) d - (Note 5) f ø22.2(7/8)
Front view
c
30 (1-3/16)
Twinning pipe(Low pressure)
<optional parts>
Outdoor unit 1
1220 (48-1/16)
Note 1. Connect the pipes as shown in the figure above. Refer to the table aboveforthe pipe size.
2. Twinning pipe (High pressure) should not be tilted more than 15 degrees from the horizontal plane.
Be sure to see the Installation Manual for details of Twinning pipe installation.
3. The pipe section before the Twinning pipe (section "a" in the figure) must have at least 500mm(19-11/16) of straight section
(*including the straight pipe that is supplied with the Twinning pipe).
4. Only use the Twinning pipe by Mitsubishi (optional parts).
5. Connect the outdoor unit 1 with the Twinning pipe (Low pressure) (section "d" in the figure).
Component unit name
PURY-HP144TSKMU-A-H(-BS) PURY-HP192TSKMU-A-H(-BS)
Package unit name
PURY-HP72TKMU-A-H(-BS)
PURY-HP96TKMU-A-H(-BS)
Outdoor unit 1
PURY-HP72TKMU-A-H(-BS)
PURY-HP96TKMU-A-H(-BS)
Outdoor unit 2
Outdoor Twinning Kit(optional parts)
CMY-R100CBK2
ø22.2(7/8)
High pressure a
BC controller~Twinning pipe
ø28.58(1-1/8)
Low pressure b
Twinning pipe connection size
Intake
air
Discharge air
740 (29-5/32)
Outdoor Unit:
PUR Y-HP144TSKMU-A-H – DIMENSIONS
Unit : mm(in)
Twinning Kit:
CMY-R100CBK2
Low-pressure pipe twinning kit
CMY-R 100C BK2
1”
(Outside diameter)
<Elbow pipe(Accessory)>
1-5/32"
7/8”
1”
21/32” (Outside
4-5/32”
1-3/32”
5-1/4”
1-31/32"
7/8"
7/8"
1-7/16”
1-1/4”
3-17/32”
1-5/32”
(Outside diameter)
6-15/16”
1-31/32"
1-5/32"
1-7/16”
diameter)
17-1/32”
<Deformed pipe(Accessory)>
<Low-pressure pipe twinning kit(Accessory)>
1”
2-3/8”
1”
7/8"
(Outside diameter)
3/4”
2-15/32"
3-5/32"
High-pressure twinning pipe
<Pipe for routing through the bottom
(Accessory)>
<Pipe for routing through the front
(Accessory)>
3-5/32"
3/4"
8-7/16”
1"
21/32"
1-13/32”
3/4"
(Outside diameter)
<Deformed pipe(Accessory)>
5/8”
3/4”
(Outside diameter)
2-15/32"
(3Pcs.)
15
Distributer
The angle
ang of the branch pipe for hign pressure is within 15
2.. Use the attached pipe to braze the port-opening of the distribute
3.. Pipe diameter is indicated by inside diamete
4.. Only use the Twinning pipe by Mitsubishi (optional parts)
3/4"
4-17/32"
7-17/32"
2-5/16"
1"
3/4"
7/8"
57
(2-1/4)
Left side view
20
20
(13/16)
(13/16)
586(23-3/32)
Intake
air
Control box
19.5
(25/32)
150 (5-29/32)
57
(2-1/4)
7
6
(10-23/32)
(11-7/8)
(8-15/16)
(9-5/16)
(9-29/32)
(10-23/32)
2
80
(3-5/32)
Refrigerant service
valve <High pressure>
262
(10-11/32)
Refrigerant service valve
<Low pressure>
Refrigerant service valve
<High pressure>
4
217
(8-9/16)
Discharge air
4X5-ø4.6(3/16) Hole
(Make hole at the plastic fan guard
for snow hood attachment)
<Snow hood attachment hole>
(5-23/32) 145
Intake
air
54(2-5/32)
(23-5/8)
=(5-29/32)X4
(2-25/32)
600=150×4
70
196 (7-23/32)
146 (5-3/4)
121 (4-25/32)
272
301
227
236
251
272
8
1
Bottom view
1060(41-3/4)
(Mounting pitch)
3 Refrigerant service
valve <Low pressure>
150 (5-29/32)
83 (3-9/32)
Front view
75(2-31/32)
58(2-5/16)
140(5-17/32)
5
Top view
1181(46-1/2)
1220(48-1/16)
77
(3-1/16)
Service
panel
Intake
air
19.5
(25/32)
740(29-5/32)
2X2-14(9/16)X20(13/16)
Oval hole
2X2-80(3-5/32)X35(1-13/32)
Oval hole
<Sling hole>
146
(5-3/4)
84
(3-5/16)
94
(3-23/32)
29.5
(1-3/16)
The ISO 14000 series is a set of standards applying to environmental protection set by the
International Standard Organization (ISO).
80
(3-5/32)
29.5
(1-3/16)
Mitsubishi Electric Air Conditioning & Refrigeration Systems Works acquired environmental
management system standard ISO 14001 certification.
89
(3-17/32)
303
(11-15/16)
1650(64-31/32)
Certificate Number EC97J1227
1347(53-1/16)
Certificate Number FM33568
ISO Authorization System
The ISO 9000 series is a plant authorization system relating to quality warranties as
stipulated by the ISO. ISO 9001 certifies quality warranties based on the "design,
development, production, installation and auxiliary services" for products built at
an authorized plant.
(26-13/16)
681(678~684)
(26-23/32~26-15/16)
(Mounting pitch)
(740)(29-5/32)
ø25.4
(1)
ø25.4
(1)
Service valve
High
Low
pressure
pressure
ø25.4
ø25.4
(1)
(1)
8
7
6
5
4
3
2
1
NO.
Specifications
140 × 77 Knockout hole
(5-17/32) (3-1/16)
Front through hole
ø45 Knockout hole
(Uses when twinning
(1-25/32)
kit (optional
parts) is mounted.)
150 × 94 Knockout hole
Bottom through hole (5-29/32) (3-23/32)
ø62.7 or ø34.5 Knockout hole
Front through hole (2-15/32)
(1-3/8)
ø43.7 or ø22.2 Knockout hole
Front through hole (1-3/4)
(7/8)
For wires
ø65 Knockout hole
Bottom through hole (2-9/16)
ø52 Knockout hole
Bottom through hole (2-1/16)
ø34 Knockout hole
For transmission cables Front through hole (1-11/32)
For pipes
Front through hole
Usage
1 Use the pipe
* joint(field supply) and connect to the refrigerant service
valve piping.
PURY-HP72TKMU-A-H(-BS) ø15.88 Brazed ø19.05 Brazed
(3/4) *1
(5/8) *1
PURY-HP96TKMU-A-H(-BS) ø19.05 Brazed ø22.2 Brazed
(3/4) *1
(7/8) *1
Model
Diameter
Refrigerant pipe
High
Low
pressure
pressure
Connecting pipe specifications
At brazing of pipes,wrap the refrigerant service valve
with wet cloth and keep the temperature of
refrigerant service valve under 120°C(248°F).
Unit: mm (in.)
Model:
PUR Y-HP72TKMU-A-H – DIMENSIONS
Mitsubishi Electric Air Conditioning & Refrigeration Systems Works acquired ISO
9001 certification under Series 9000 of the International Standard Organization (ISO)
based on a review of quality warranties for the production of refrigeration and air
conditioning equipment.
Mitsubishi Electric Sales Canada Inc.
www.MitsubishiElectric.ca
Specifications are subject to change without notice.
PR_SB_PURY-HP144TSKMU-A-H_201401
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement