Jabra BT 530 bluetooth headset User manual

Below you will find brief information for bluetooth headset BT 530. The Jabra BT530 is a Bluetooth headset that lets you answer, end, reject calls, voice dial, redial last number, utilize call waiting, mute, and put a call on hold, among other functions. It also allows you to stream music from a mobile phone or any other Bluetooth device that supports A2DP. This headset has a talk time of up to 4 hours and a standby time of up to 250 hours. It also features a multi-colored light for status and battery indicator, quiet mode, dual microphone solution for Noise Blackout™, digital sound enhancement via DSP technology, and noise reduction on transmitted and received audio.

PDF Download
Document
Jabra BT 530 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Bluetooth headset
  • Answer/end calls
  • Voice dialing
  • Reject calls
  • Music streaming
  • Multi-point connection
  • Noise reduction
  • Up to 4 hours talk time
  • Up to 250 hours standby time

Frequently asked questions

Charge the headset using the included AC power supply. The LED indicator will be solid red when charging and will turn green when fully charged.

Put your headset in pairing mode by pressing and holding the answer/end button for 5 seconds until the LED light is solid blue. Then, on your phone, go to the Bluetooth settings and select "Jabra BT530" to complete the pairing process.

Tap the answer/end button once to answer an incoming call. Tap the button again to end the call.

Tap the volume up or down buttons to adjust the headset's volume.

Press both volume up and down buttons at the same time to mute the microphone. Press either button again to unmute.
Preparing document for printing…
0%