USB3DP00B User`s Manual
USB 3.0 to DisplayPort
Adapter
User's Manual
Table of Contents
Safety instructions.......................................................................... 3
Copyright.......................................................................................... 3
Trademarks...................................................................................... 3
Introduction...................................................................................... 4
Features........................................................................................... 5
Application....................................................................................... 6
Package contents............................................................................ 7
System requirements...................................................................... 7
Hardware requirements.................................................................. 7
Parts and connection...................................................................... 9
- Parts................................................................................................ 9
- Connection....................................................................................10
Installation .....................................................................................11
®
®
- For Windows 7/ Windows 8 users..............................................11
®
- For Windows Vista users.............................................................14
®
- For Windows XP users................................................................17
Verifying the driver........................................................................19
Using the adapter..........................................................................20
- Utility settings................................................................................21
- Windows system configuration......................................................24
- Extended mode ............................................................................25
- Mirror mode...................................................................................27
- Be the primary monitor..................................................................28
- Using multiple adapters.................................................................29
Uninstall the adapter and driver..................................................30
Specifications................................................................................31
Regulatory compliance.................................................................33
- FCC conditions..............................................................................33
- CE ................................................................................................33
- WEEE information.........................................................................33
2
Before attempting to connect, operate or adjust this product, please
save and read the User's Manual completely. The style of the
product shown in this User's Manual may be different from the actual
unit due to various models.
Safety instructions
Always read the safety instructions carefully:
■ Keep this User’s Manual for future reference
■ Keep this equipment away from humidity
■ If any of the following situation arises, get the equipment
checked by a service technician:
• The equipment has been exposed to moisture.
• The equipment has been dropped and damaged.
• The equipment has obvious sign of breakage.
• The equipment has not been working well or cannot get
it to work according to the User’s Manual.
Copyright
This document contains proprietary information protected
by copyright. All right are reserved. No part of this manual
may be reproduced by any mechanical, electronic or other
means, in any form, without prior written permission of the
manufacturer.
Trademarks
All trademarks and registered trademarks are the property
of their respective owners or companies.
3
Introduction
The USB 3.0 to DisplayPort Adapter is a device which
enables connection to second display device to a computer
using USB 3.0 port. With this convenient design, it can
connect up to 6 display devices to a computer without
installing extra video cards. Once the driver has been
installed, the USB-attached monitor will be enabled
immediately. No function key on the adapter and there is no
need to reboot the operating system after unplugging the
USB adapter.
System performance is an important issue when using
multiple monitors. Another benefit of this adapter is that it
occupies little computer resource; ensuring users get quality
display without comprising computer performance.
4
Features
■ Add-on monitor, LCD or projector through a single USB 3.0
port hot-plug
■ Compliant with USB 3.0 Super Speed upstream
connection
■ Supports High Resolution up to 2560x1600 pixels
■ Video streaming is supported up to 1080p
■ Extend and Mirror mode support
■ Resumes from hibernation and suspend modes
■ Supports up to 6 USB display adapters to work
simultaneously
5
Application
Office workstation
■ View your large spreadsheets across two screens with
display continuity
■ Multitask more effectively without overlapping windows
■ Edit on one screen while surfing the Internet information
on the other
On the road
■ Do multiple screen presentations without bringing
another computer
■ Easily provide multiple screen exhibitions in a trade
show
Graphics workstation
■ Use second display for palettes/tools
■ Get a panoramic view of large documents
Editing workstation
■ Type documents on one screen while viewing reference
material on the other
■ Compare two documents simultaneously across two
screens
Financial analysis
■ Have one monitor per data stream
■ View charts and live data at the same time
Entertainment
■ View videos/TV on one screen and reviews on the other
■ Get additional perspectives when playing games
6
Package contents
■ USB 3.0 to DisplayPort Adapter ■ CD (Driver & User’s Manual) ■ Quick Installation Guide ■ USB Cable x1
x1
x1
x1
System requirements
■ Support Windows® XP, Windows® Vista, Windows® 7,
and Windows® 8
Hardware requirements
■ The minimum requirements for the PC are:
- With Single Core CPU at 1.2GHz or higher processor
clock. Intel® Pentium®/Celeron® family, or AMD® K6®/
Athlon®/Duron® family, or compatible processor
- 512MB memory
- At least one USB3.0 port (*)
- 30Mb of available disk space
- 800 x 600 or higher resolution monitor
*Note: Although this adapter supports to connect to a USB
2.0 connector, the quality might be poor under high resolution
display condition. In addition, this adapter does not support USB
1.0/1.1.
7
■ To play DVD on the adapter-attached monitor, except the
requirements above, the following requirements should
also be met:
- With dual core CPU at 2.0 GHz processor clock
- The adapter screen resolution be set to 800x600 with 32bit
color. It is recommended to close all other unnecessary
applications if the video playback is not smooth.
■ For 1-2 monitors, business usage, productivity target.
This may not provide full frame rate DVD playback at full
screen.
- 1.2GHz Single Core CPU
- 512MB memory
■ For 3 monitors, where 1 could run DVD video while also
targeting productivity and business apps. Will support only
1 video of DVD resolution at full screen
-1.6GHz CPU
- 1GB memory
■ For 6 screen where 1 screen can run full screen DVD
video
-1.8GHz Core Duo
- 1GB memory
8
Parts and connection
Parts
2
1
1 DisplayPort connector (DP Connector) : Connect to a
desired DP monitor. To connect different types of monitor,
you may need a converter.
2 Micro USB connector: Connect to an available USB
connector on a computer.
9
Connection
1. Plug one end of DP cable into the adapter's DP
connector, and the other end of DP cable into a DP
connector of monitor.
2. Plug the micro USB connector into the adapter's micro
USB connector and the other end into a PC.
10
Installation
Caution: DO NOT connect the USB 3.0 to DisplayPort
Adapter to a computer before installing the provided
driver.
Note that the following strings and screen shots shown on
this user's manual may vary slightly from each operation.
For Windows® 7/ Windows® 8 users
1. Insert the supplied driver CD into a computer's CD/DVDROM.
2. Click <Run Setup.exe> to start the installation.
11
Note:
If the AutoPlay does not appear automatically, locate and
double-click on the Setup.exe file in the driver folder to
launch the setup.
Enter the administrator password and then click <Yes> to
start the installation if a User Account Control dialog box
appears.
3.Click <I Accept> for the next step.
12
4.Be patient with the installation procedure, it may take a
while.
5.Connect the USB 3.0 to DisplayPort Adapter to a
computer after the driver installation is completed. For
connection details, refer to the chapter of Parts and
Connection.
6. When the operating system detects the adapter, the
reminder message will appear on the system tray.
Note: Click <Yes> to restart or <No> to manually restart
later, if a prompting to restart computer message appears.
7. To change the status of display mode, position the mouse
anywhere on the Windows desktop, and then right-click
to select <Screen Resolution>.
13
For Windows® Vista users
1. Insert the supplied driver CD into a computer's CD/DVDROM.
2. Click <Run Setup.exe> to start the installation.
Note:
● If the AutoPlay does not appear automatically, locate and
double-click on the Setup.exe file in the driver folder to
launch the setup.
● Enter the administrator password and then click <Allow>
to start the installation if a User Account Control dialog
box appears.
14
3.Click <I Accept> for the next step.
4.Be patient with the installation procedure, it may take a
while.
5.Connect the USB 3.0 to DisplayPort Adapter to a
computer after the driver installation is completed. For
connection details, refer to the chapter of Parts and
Connection.
15
6. When the operating system detects the adapter, the
reminder message will appear in the Windows System
Tray.
Note: Click <Yes> to restart or <No> to manually restart
later, if a prompting to restart computer message appears.
7.To change the status of display mode, position the mouse
anywhere on the Windows desktop, and then right-click
to select <Personalize>.
8. Click <Display Settings> to enter the configuration page.
16
For Windows® XP users
1. Insert the supplied driver CD into a computer's CD/DVDROM.
2. Click <I Accept > for the next step.
3.Be patient with the installation procedure, it may take a
while.
17
Note: Click <Yes> to restart or <No> to manually restart
later, if a prompting to restart computer message appears.
4.Connect the USB 3.0 to DisplayPort Adapter to a
computer after the driver installation is completed. For
connection details, refer to the chapter of Parts and
Connection.
5. When the operating system detects the adapter, the
reminder message will appear on the system tray.
6.To change the status of display mode, position the mouse
anywhere on the Windows desktop, and then right-click
to select <Properties>.
7. Click <Settings> tab to enter the configuration page.
18
Verifying the driver
To verify the driver of the adapter, follow the step below to
open the Device Manager on Windows operating system.
1. Following the path as below to open the device manager
Windows® 8: My Computer\Computer(right click)\
Properties\Device Manager
Windows® 7: Control Panel\System and Security\
System\Device Manager
Windows® Vista: Control Panel\System Maintenance\
Device Manager
Windows® XP: Control Panel\System\Hardware\Device
Manager
2. A string similar to USB..Adapters device should be listed.
®
The screen shot above is demonstrated by Windows 7
and might be varied slightly for each operating system.
Note: If there is a
(question) or
(exclamation) mark
next to that item, then the driver is not properly installed.
Please delete the item, unplug the adapter and repeat the
installation steps.
19
Using the adapter
There are several ways to utilize the monitor attached on
the adapter. The add-on monitor can be configured to use
either “mirror mode”, “extended mode” or be the primary
display as described in this section.
Mirror mode: Duplicate the primary display and mirror to
the add-on monitor(s).
Extended mode: The Windows Desktop will be spread to
the add-on monitor(s).
Primary mode: Assign the add-on monitor to the primary
display.
Note that the following screen shots in this section are
using Windows® 7 operating system. It may not match your
operating system but the definitions of buttons, tabs and
menus are the same.
20
Utility settings
The supplied utility allows you to configure the display
mode, screen rotation, screen resolution, and physical
arrangement of your monitors.
1. Click <
(utility icon) > in the Windows System Tray.
Note: The
may be hided in the Windows System
(arrow icon) > to bring up more icons if it
Tray. Click <
happens.
2. Select a preferred option, and then click it using mouse.
21
Description of the settings
Options
DisplayLink
Manager
Check for Updates
Description
Enable the Windows screen resolution page.
Check the latest driver and download if
available.
USB 3.0 to DisplayPort Adapter
Screen
Click to select an available resolution. Note
Resolution
that this function is invalid in mirror mode, as
the resolution is defined as the resolution of
the primary monitor.
Screen
Rotate the screen according to the desired
Rotation
orientation.
Extend To
Extend the screen according to the desired
orientation.
Set as Main
Set this screen to the main screen
Monitor
Notebook
Switch the add-on monitor to the main display
Monitor Off
and turn off the screen of the laptop.
Note: This function works only when one
add-on monitor is connected. This option will
also only appear on laptop.
Mirror
Duplicate the primary monitor to the monitor
which connects with the adapter.
Off
Turn off the monitor.
Optimize for
Optimize the video quality when playing back.
Video
Text may appear less clear when enabling.
22
Options
Description
USB 3.0 to DisplayPort Adapter
Fit to TV
Adjust the size of Windows Desktop on the
TV.
Note: This function works only when one
add-on monitor is connected. Besides,
this option will also only work in extended
mode. The add-on monitor will change to the
extended mode if selecting this option while
in mirror mode.
Audio Setup
Enable the Windows audio configuration
page.
This function works only in specific models.
Video Setup
Enable the Windows screen resolution page.
23
Windows system configuration
Position the mouse anywhere on your computer desktop,
right-click and select <Screen Resolution> on
Windows® 7/ Windows® 8, Personalize > Display Settings
on Windows® Vista or Properties > Settings on Windows®
XP.
Alternatively, click <
(utility icon) > in the Windows
System Tray, and then select DisplayLink Manager or
Video Setup.
24
Extended mode
1. Refer to the Windows system configuration section to
open the configuration page.
2. In the Display drop-down menu, select the option with
the string similar to “DisplayLink Graphics Adapter”.
2
3
4
25
3. Check the Multiple Displays > Extend these displays
on Window® 7/ Window® 8, Extend the desktop onto
this monitor box on Windows® Vista or Extend my
Windows desktop onto this monitor box on Windows®
XP.
4. Click <OK> to confirm and close the settings screen.
5. Once the setting is completed, simply drag and drop the
application icons or the opened windows to the add-on
monitor. However, some applications may not support to
display on the extended desktop.
Cursor disappeared
If the status remains in the extended mode but the adapter
is disconnected, the desktop will still be panned to the addon monitor. The cursor may not be found on the primary
monitor in such a case. If it happens, connect the addon monitor through the adapter again or keep moving the
mouse.
Video playback in extended mode
If the video or DVD playback quality is poor or low
performance in the extended mode, please playback it on
the primary monitor instead of the add-on monitor.
26
Mirror mode
1. Refer to the Windows system configuration section to
open the configuration page.
2. In the Display drop-down menu, select the option with
the string similar to “DisplayLink Graphics Adapter”.
3. Check the Multiple Displays > Duplicate these
displays on Window® 7/ Window® 8, uncheck the Extend
the desktop onto this monitor box on Windows® Vista
or Extend my Windows desktop onto this monitor box
on Windows® XP.
4. Click <OK> to confirm and close the settings screen.
27
Be the primary monitor
1. Refer to the Windows system configuration section to
open the configuration page.
2. In the Display drop-down menu, select the option with
the string similar to “DisplayLink Graphics Adapter”.
3. Check the Make this my main display box on
Window® 7/ Window® 8 / Windows® Vista, or Use this
device as the primary monitor box on Windows® XP.
Note: Some PCs and laptops may need to disable the
main display (i.e. uncheck the Extend the desktop onto
this monitor or Extend my Windows desktop onto this
monitor box for the main display) as part of the same
settings change.
4. Click <OK> to confirm and close the settings screen.
28
Using multiple adapters
Up to 6 adapters can be connected to one computer
simultaneously. To connect multiple adapters, install the
drive as described in the Installation section and then
connect the adapters to a computer.
Note: Only the first connected adapter can be configured to
extended mode and the others will be forced to mirror mode
if using a low-end or poor conditional computer.
29
Uninstall the adapter and driver
1. Open the Control Panel > Programs > Programs and
Features on Windows® 7/ Windows® 8/ Windows® Vista,
and Add or Remove Programs on Windows® XP.
2.Select <DisplayLink Graphic> and click <Uninstall or
Remove>.
3.Click <Yes> to remove the driver.
4.Click <Yes> to restart your computer and then unplug the
adapter now.
30
Specifications
Host Interface USB 3.0
Video Interface DisplayPort
Connectors
Video output: DisplayPort connector
Host upstream link: USB 3.0 Micro B type
connector
Connectivity Up to 6 adapters on a computer
Power Mode
Bus-power
OS Support
- Windows® XP
- Windows® Vista
- Windows® 7
- Windows® 8
Supported
Extended Desktop,
Modes
Mirrored Desktop, Primary Display
Housing
Material: ABS (Plastic)
Color: Black
Size: 84.5 (L) x 55.5 (W) x18 (H) mm
Operation temperature: 10°C~-40°C
Working
Environment Storage temperature: -20°C~70°C
Relative Humidity: < 85% non-condensing
Certificate
CE, FCC
Resolutions
and Refresh
rate
Resolution
Name
640x480
VGA
Refresh Rate
60 72 75 85
800x600
SVGA
56 60 72 75 85
1024x768
XGA
60 70 75 85
1280x720
720p
50 60
1280x768
WXGA+
60 75 85
1280x800
WXGA
60
1280x1024
SXGA
60 75
1366x768
WXGA+
50 60
1400x1050
SXGA+
60 75 85
1600x900
60
1600x1200
UXGA
1680x1050
WSXGA+
60
60
1920x1080
1080p
50 60
1920x1200
WUXGA
60
2048x1152
60
2048x1536
60
2560x1440
2560x1600
60
WQXGA
60
640x480, 720x400*, 720x480, 768x576, 800x600,
832x642, 800x480, 848x480, 1024x600, 1024x768,
1152x864, 1152x870, 1280x720, 1280x768, 1280x800,
1280x960, 1280x1024, 1360x768, 1366x768, 1368x768,
1400x1050, 1440x900, 1600x900, 1600x1200,
1680x1050, 1920x1080, 1920x1200, 2048x1080,
2048x1152, 2048x1280, 2048x1536, 2560x1440,
2560x1600
Note that interlaced modes and reduced blanking modes
are not supported.
USB Cable
Separated from the body
Type: USB 3.0 Type A (Male) to Micro USB 3.0 (Female)
Specifications are subject to change without notice.
Regulatory compliance
FCC conditions
This equipment has been tested and found to comply with
Part 15 Class B of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received and
include interference that may cause undesired operation.
CE
This equipment is in compliance with the requirements of
the following regulations: EN 55 022: CLASS B
WEEE information
For EU (European Union) member users: According to
the WEEE (Waste electrical and electronic equipment)
Directive, do not dispose of this product as household
waste or commercial waste. Waste electrical and electronic
equipment should be appropriately collected and recycled
as required by practices established for your country. For
information on recycling of this product, please contact your
local authorities, your household waste disposal service or
the shop where you purchased the product.
USB 3.0 to DisplayPort Adapter
User's Manual
SVR-H V1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement