Sartorius Cubis® Series

Sartorius Cubis® Series
Laboratory balances
Sartorius Cubis® Series
MODULAR
DESIGN
General Specifications
Power supply
100–240 V~, –15 %/+10 %, 50–60 Hz, 1.0 A
Input voltage
15 VDC, ± 5 %
Power consumption
7W (max.)
Ambient temperature
Operation +5°C to +40°C
Highest relative humidity:
80 % for temperatures up to 31°C, decreasing linearly to 50 % relative humidity for 40°C
Safety of electrical equipment
According to EN 61010-1:2001: Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 1: General requirements
Electromagnetic compatibility
According to EN 61326-1:2006: Electrical equipment for measurement, control, and laboratory use –
EMCrequirements – Part 1: General requirements
Defined immunity to interference:
Suitable for use in industrial areas
Interference emission:
Class B (suitable for use in residential areas and areas that are connected to a low voltage network
that also supplies residential buildings).
Cubis® Display and Control Units
Types
MSA
MSU
MSE
Operation
Touch screen, keys for central basic
functions
Keys
Keys
Display
High-resolution color TFT,
5.7" graphic display
High-resolution black-and-white,
5.7" graphical display
Liquid crystal display, black-andwhite
Adaptation of the
display and control unit
Tiltable display, removable display and control unit
Removable display and control unit
Standard data interfaces
– USB (integrated into weighing module)
– Various data protocols available (can also be connected to software
designed for external manufacturers)
– RS-232C accessory interface, 25-pin (integrated into weighing module)
– Ethernet (integrated into display and service unit)
– USB (integrated into weighing
module)
– RS-232C accessory interface,
25-pin (integrated into weighing
module)
SD card reader
Integrated as standard into display and control unit
–
Operation of the motorized Activated by side keys or touch-free using
draft shield (only for DA, DI, IR switch (optional); learning capability
DM draft shields)
Activated by key or touch-free
using IR switch (optional); learning
capability
Applications
Unit conversion, isoCAL automatic
calibration | adjustment function,
density determination (buoyancy
method only), calculations,
averaging, net | total formulation,
weighing in percent, counting
Unit conversion, SQmin function for minimum initial weight according
to USP, isoCAL automatic calibration | adjustment function, individual
identifiers, density determination, statistics, calculations, averaging,
formulation, weighing in percent, time-controlled functions, totalizing, DKD
measurement uncertainty, second tare memory, counting, checkweighing,
alibi memory, audit trail
Cubis® Weighing Modules
Ultramicrobalances 0.0001 mg
Model
2.7S
2.7S (with DF filter draft shield)
Readability
mg
0.0001
0.0001
Weighing Capacity
g
2.1
2.1
Tare range (subtractive)
g
– 2.1
– 2.1
Repeatability
<±mg
0.00025
0.00025
Linearity
<±mg
0.0009
0.0009
Corner load (test load [g])
mg
0.0025 (1)
0.0025 (1)
Min. initial weight*
mg
1
–
Sensitivity drift between +10 to +30°C
±ppm/K
1
1
Typical stabilization time
s
<7
<7
Typical measurement time
s
< 10
< 10
External standard calibration value
(min. accuracy class)
g
2 (E2)
2 (E2)
0.1 – 0.4
0.1 – 0.4
20
50
70
15
Display result
(depending on the set filter level)
Weighing pan size d
mm
Weighing chamber height
mm
Protection
Protected against dust and water
* = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
2
Microbalances 0.001 mg
Model
6.6S
Readability
mg
0.001
6.6S (with DF filter
draft shield)
0.001
Weighing Capacity
g
6.1
6.1
1.1 | 2.1 | 3.1
Tare range (subtractive)
g
– 6.1
– 6.1
– 3.1
Repeatability
<±mg
0.001
0.001
0.003 | 0.004 | 0.005
Linearity
<±mg
0.004
0.004
0.004
Corner load (test load [g])
mg
0.004 (2)
0.004 (2)**
0.005 (1)
Min. initial weight*
mg
2
–
4
Sensitivity drift between +10 to +30°C
±ppm/K
1
1
1
Typical stabilization time
s
<5
<5
<5
Typical measurement time
s
<8
<8
<8
External standard calibration value
(min. accuracy class)
g
5 (E2)
5 (E2)
3 (E2)
0.1 – 0.4
0.1 – 0.4
0.1 – 0.4
Display result
(depending on the set filter level)
3.6P
0.001 | 0.002 | 0.005
Weighing pan size d
mm
30
50
30
Weighing chamber height
mm
70
15
70
Protection
Protected against dust and water
Semi-microbalances 0.01 mg
Model
225S
225P
125P
Readability
mg
0.01
0.01 | 0.02 | 0.05
0.01 | 0.1
Weighing Capacity
g
220
60 | 120 | 220
60 | 120
Tare range (subtractive)
g
– 220
– 220
– 120
Repeatability
<±mg
0…60 g: 0.015
60…220 g: 0.025
0…60 g: 0.015
60…220 g: 0.04
0…60 g: 0.015
60…120 g: 0.06
Linearity
<±mg
0.1
0.15
0.15
Corner load (test load [g])
mg
0.15 (100)
0.2 (100)
0.15 (50)
Min. initial weight*
mg
20
20
20
Sensitivity drift between +10 to +30°C
±ppm/K
1
1
1
Typical stabilization time
s
<2
<2
<2
Typical measurement time
s
<6
<6
<6
External standard calibration value
(min. accuracy class)
g
200 (E2)
200 (E2)
100 (E2)
Display result
(depending on the set filter level)
0.2 – 0.4
Weighing pan size (W + D)
mm
85 + 85
Weighing chamber height (draft shield DU)
mm
261
Protection
Protected against dust and water
* = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
** = Measured using a standard pan
3
Analytical Balances 0.1 mg
Model
Readability
mg
524S
524P
324S
224S
324P
124S
0.1
0.1 | 0.2 | 0.5
0.1
0.1
0.1 | 0.2 | 0.5
0.1
Weighing Capacity
g
520
120 | 240 | 520
320
220
80 | 160 | 320
120
Tare range (subtractive)
g
– 520
– 520
– 320
– 220
– 320
– 120
Repeatability
<±mg
0.1
0.15 | 0.2 | 0.4
0.1
0.07
0.1 | 0.2 | 0.4
0.1
Linearity
<±mg
0.4
0.5
0.3
0.2
0.5
0.2
Corner load (test load [g])
mg
0.3 (200)
0.4 (200)
0.3 (200)
0.2 (100)
0.4 (200)
0.2 (50)
Min. initial weight*
mg
120
120
120
120
120
120
Sensitivity drift between +10 to +30°C
±ppm/K
1
1
1
1
1
1
Typical stabilization time
s
<1
<1
<1
<1
<1
<1
Typical measurement time
s
<3
<3
<3
<3
<3
<3
External standard calibration value
(min. accuracy class)
g
500
500
200+100
(E2)
200 (E2)
200+100
(E2)
100 (E2)
2203S
2203P
1203S
Display result
(depending on the set filter level)
Weighing pan size (W + D)
0.1 – 0.4
mm
85 + 85
Weighing chamber height (draft shield DU) mm
261
Protection
Protected against dust and water
* = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
Precision Balances
Models
5203S
5203P
3203S
Readability
mg
1
1 | 2 | 5
1
1
1 | 10
1
Weighing Capacity
g
5,200
1,200 | 2,400 | 5,200
3,200
2,200
1,010 | 2,200
1,200
Tare range (subtractive)
g
- 5,200
- 5,200
– 3,200
– 2,200
– 2,200
– 1,200
Repeatability
<±mg
1
1
1
1
1 | 6
0.7
Linearity
<±mg
5
5
5
3
5
2
Corner load (test load [g])
mg
2 (2,000)
2 (2,000)
2 (1,000)
2 (1,000)
3 (1,000)
2 (500)
Min. initial weight*
g
1.5
1.5
1.5
1.5
1.5
1.5
Sensitivity drift between +10 to +30°C
±ppm/K
1
1
1
1
1
1.5
Typical stabilization time
s
<1
<1
<1
<1
<1
<1
Typical measurement time
s
<2
<2
<2
< 1.5
< 1.5
< 1.5
External standard calibration value
(min. accuracy class)
g
5,000
5,000
2,000
2,000 (E2)
1,000 (E2)
1,000 (E2)
Display result
(depending on the set filter level)
Weighing pan size (W + D)
0.1 – 0.4
mm
140 + 140
Weighing chamber height (draft shield DE) mm
172
Protection
Protected against dust and water
* = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
4
Precision Balances
Models
Readability
mg
623S
623P
323S
1
1 | 2 | 5
1
Weighing Capacity
g
620
150 | 300 | 620
320
Tare range (subtractive)
g
– 620
– 620
– 320
Repeatability
<±mg
0.7
1 | 2 | 4
0.7
Linearity
<±mg
2
5
2
Corner load (test load [g])
mg
2 (200)
4 (200)
2 (200)
Min. initial weight*
g
1.5
1.5
1.5
Sensitivity drift between +10 to +30°C
±ppm/K
2
2
2
Typical stabilization time
s
< 0.8
< 0.8
< 0.8
Typical measurement time
s
<1
<1
<1
External standard calibration value
(min. accuracy class)
g
500 (E2)
500 (F1)
200 (E2)
Display result
(depending on the set filter level)
0.1 – 0.4
Weighing pan size (W + D)
mm
140 + 140
Weighing chamber height (draft shield DE)
mm
172
Protection
Protected against dust and water
Models
14202S
14202P
10202S
8202S
Readability
mg
10
10 | 20 | 50
10
10
Weighing Capacity
g
14,200
3,500 | 7,000 | 14,200
10,200
8,200
Tare range (subtractive)
g
- 14,200
- 14,200
– 10,200
– 8,200
Repeatability
<±mg
10
10 | 20 | 40
7
7
Linearity
<±mg
30
50
20
20
Corner load (test load [g])
mg
20 (5,000)
40 (5,000)
20 (5,000)
20 (5,000)
Min. initial weight*
g
15
15
12
12
1.5
1.5
2
2
Sensitivity drift between +10 to +30°C
±ppm/K
Typical stabilization time
s
<1
<1
<1
<1
Typical measurement time
s
< 1.5
< 1.5
< 1.5
< 1.5
External standard calibration value
(min. accuracy class)
kg
10 (E2)
10 (E2)
10 (E2)
5 (E2)
Display result
(depending on the set filter level)
Weighing pan size (W + D)
Protection
0.1 – 0.4
mm
206 + 206
Protected against dust and water
* = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
5
Precision Balances
Models
Readability
mg
6202S
6202P
5202S
4202S
10
10 | 20 | 50
10
10
Weighing Capacity
g
6,200
1,500 | 3,000 | 6,200
5,200
4,200
Tare range (subtractive)
g
– 6,200
– 6,200
- 5,200
– 4,200
Repeatability
<±mg
7
7 | 20 | 40
6
7
Linearity
<±mg
20
50
10
20
Corner load (test load [g])
mg
20 (2,000)
50 (2,000)
10 (2,000)
30 (2,000)
Min. initial weight*
g
12
12
10
12
Sensitivity drift between +10 to +30°C
±ppm/K
2
2
2
2
Typical stabilization time
s
<1
<1
< 0.8
< 0.8
Typical measurement time
s
< 1.5
< 1.5
<1
<1
External standard calibration value
(min. accuracy class)
kg
5 (E2)
5 (F1)
5
2 (E2)
206 + 206
140 + 140
206 + 206
Display result
(depending on the set filter level)
Weighing pan size (W + D)
0.1 – 0.4
mm
206 + 206
Protection
Protected against dust and water
Models
2202S
1202S
12201S
8201S
5201S
Readability
mg
10
10
100
100
100
Weighing Capacity
g
2,200
1,200
12,200
8,200
5,200
Tare range (subtractive)
g
– 2,200
– 1,200
– 12,200
– 8,200
– 5,200
Repeatability
<±mg
7
7
50
50
50
Linearity
<±mg
20
20
100
100
100
Corner load (test load [g])
mg
20 (1,000)
20 (500)
200 (5,000)
200 (5,000)
200 (2,000)
Min. initial weight*
g
12
12
100
100
100
Sensitivity drift between +10 to +30°C
±ppm/K
2
2
4
4
4
< 0.8
< 0.8
< 0.8
< 0.8
< 0.8
Typical stabilization time
s
Typical measurement time
s
<1
<1
<1
<1
<1
External standard calibration value
(min. accuracy class)
kg
2 (F1)
1 (F1)
10 (F1)
5 (F2)
5 (F2)
Display result
(depending on the set filter level)
Weighing pan size (W + D)
Protection
0.1 – 0.4
mm
206 + 206
Protected against dust and water
* = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
6
Verified Models with EC Type Approval Certificate: Micro- and ultramicrobalances
Model
Accuracy class*
mg
6.6S-xCE
2.7S-xCE
3.6P-xCE
k
k
k
0.0001
0.001
For verified models: EC Type Approval Certificate D09-09-015, Type: MSX
Scale interval d*
mg
0.001
Weighing capacity max*
g
6.1
2.1
3.1
Calibration value e*
mg
1
1
1
Min. load min*
mg
0.1
0.01
0.1
Tare equalization range (subtractive)
g
< 100 % from max. weighing capacity
Application range according to DIR*
g
0.001 – 6.1
0.001 – 2.1
0.001 – 3.1
Min. initial weight**
mg
2
1
4
Typical stabilization time
s
<5
<7
<5
Typical measurement time
s
<8
< 10
<8
External standard calibration value
(min. accuracy class)
g
5
2
3
Application range (temperature)
With “isoCAL” function: +5…+40°C | Without “isoCAL” function: +15 … +25°C
Display result
(depending on the set filter level)
By selection of 1 of 4 optimized filter levels
Weighing pan size d
mm
30
20
30
Weighing chamber height
(draft shield DM)
Protection
mm
70
70
70
Protected against dust and water
Verified Models with EC Type Approval Certificate: Semi-microbalances 0.01 mg
Model
Accuracy class*
mg
225S-xCE
225P-xCE
125P-xCE
k
k
k
0.01 | 0.02 | 0.05
0.01 | 0.1
For verified models: EC Type Approval Certificate D09-09-015, Type: MSX
Scale interval d*
mg
0.01
Weighing capacity max*
g
220
60 | 120 | 220
60 | 120
Calibration value e*
mg
1
1
1
Min. load min*
mg
1
1
1
Tare equalization range (subtractive)
< 100 % from max. weighing capacity
Application range according to DIR*
g
0.001 – 220
0.001 – 220
0.001 – 120
Min. initial weight**
mg
20
20
20
Typical stabilization time
s
<2
<2
<2
Typical measurement time
s
<6
<6
<6
External standard calibration value
(min. accuracy class)
g
200 (E2)
200 (E2)
100 (E2)
Application range (temperature)
With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +15 … +25°C
Adaptation to ambient conditions
By selection of 1 of 4 optimized filter levels
Display result
(depending on the set filter level)
Weighing pan size (W + D)
0.2 – 0.4
mm
85 + 85
Weighing chamber height (draft shield DU) mm
261
Protection
Protected against dust and water
* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
7
Verified Models with EC Type Approval Certificate: Analytical Balances 0.1 mg
Model
524S-xCE
524P-xCE
324S-xCE
224S-xCE
324P-xCE
124S-xCE
Accuracy class*
k
k
k
k
k
k
0.1
0.1
0.1 | 0.2 | 0.5
0.1
For verified models: EC Type Approval Certificate D09-09-015, Type: MSX
Scale interval d*
mg
0.1
0.1 | 0.2 | 0.5
Weighing capacity max*
g
520
120 | 240 | 520
320
220
80 | 160 | 320
120
Calibration value e*
mg
1
1
1
1
1
1
Min. load min*
mg
10
10
10
10
10
10
Tare equalization range (subtractive)
g
< 100 % from max. weighing capacity
Application range according to DIR*
g
0.01–520
0.01–520
0.01–320
0.01–220
0.01–320
0.01–120
Min. initial weight**
mg
120
120
120
120
120
120
Typical stabilization time
s
<1
<1
<1
<1
<1
<1
Typical measurement time
s
<3
<3
<3
<3
<3
<3
External standard calibration value
(min. accuracy class)
g
500
500
(E2)
200+100
(E2)
200
(E2)
200+100
(E2)
100
Application range (temperature)
With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +15 … +25°C
Display result
(depending on the set filter level)
0.1 – 0.4
Weighing pan size (W + D)
mm
85 + 85
Weighing chamber height (draft shield DU) mm
261
Protection
Protected against dust and water
Verified Models with EC Type Approval Certificate: Precision Balances
Models
5203S-xCE
5203P-xCE
3203S-xCE
2203S-xCE
2203P-xCE
1203S-xCE
Accuracy class*
k
k
k
k
k
k
For verified models: EC Type Approval Certificate D09-09-015, Type: MSX
Scale interval d*
mg
1
1 | 2 | 5
1
1 | 10
1
Weighing capacity max*
g
5,200
2,200
1,010 | 2,200
1,200
Calibration value e*
mg
10
1,200 | 2,400 | 3,200
5,200
10
10
1
10
10
10
100
100
100
100
0,1 – 2,200
0,1 – 2,200
0,1 – 1,200
Min. load min*
mg
100
Tare equalization range (subtractive)
g
< 100 % from max. weighing capacity
Application range according to DIR*
g
0,1 – 5,200
0,1 – 5,200
100
0,1 – 3,200
Min. initial weight**
g
1.5
1.5
1.5
1.5
1.5
1.5
Typical stabilization time
s
<1
<1
<1
<1
<1
<1
Typical measurement time
s
<2
<2
<2
< 1.5
< 1.5
< 1.5
External standard calibration value
(min. accuracy class)
g
5,000
5,000
2,000
2,000 (E2)
1,000 (E2)
1,000 (E2)
Application range (temperature)
With “isoCAL” function: +5 to +40°C | Without “isoCAL” function: +15 to +25°C
Display result
(depending on the set filter level)
0.1 – 0.4
Weighing pan size (W + D)
mm
140 + 140
Weighing chamber height (draft shield DE) mm
172
Protection
Protected against dust and water
* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
8
Verified Models with EC Type Approval Certificate: Precision Balances
Models
Accuracy class*
mg
623S-xCE
623P-xCE
323S-xCE
K
K
K
1 | 2 | 5
1
For verified models: EC Type Approval Certificate D09-09-015, Type: MSX
Scale interval d*
mg
1
Weighing capacity max*
g
620
150 | 300 | 620
320
Calibration value e*
mg
10
10
10
Min. load min*
mg
20
20
20
Application range according to DIR*
g
0.02 – 620
0.02 – 620
0.02 – 320
Min. initial weight**
g
1.5
1.5
1.5
Tare equalization range (subtractive)
< 100 % from max. weighing capacity
Typical stabilization time
s
< 0.8
< 0.8
< 0.8
Typical measurement time
s
<1
<1
<1
Application range (temperature)
With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +10 … +30°C
Display result
(depending on the set filter level)
0.1 – 0.4
Weighing pan size (W + D)
mm
140 + 140
Weighing chamber height (draft shield DE)
mm
172
Protection
Protected against dust and water
Models
14202S-xCE
14202P-xCE
10202S-xCE
8202S-xCE
Accuracy class*
k
k
k
K
For verified models: EC Type Approval Certificate D09-09-015, Type: MSX
Scale interval d*
g
0.01
0.01 | 0.02 | 0.05
0.01
0.01
Weighing capacity max*
g
14,200
3,500 | 7,000 | 14,200
10,200
8,200
Calibration value e*
g
0.1
0.1
0.1
0.1
Min. load min*
g
1
1
1
0.5
1 – 10,200
0,5 – 8,200
Tare equalization range (subtractive)
Application range according to DIR*
< 100 % from max. weighing capacity
g
1 – 14,200
1 – 14,200
Min. initial weight**
g
15
15
12
12
Typical stabilization time
s
<1
<1
<1
<1
Typical measurement time
s
< 1.5
< 1.5
< 1.5
< 1.5
With “isoCAL” function
+5 … +40°C
+5 … +40°C
+5 … +40°C
+5 … +40°C
Without “isoCAL” function
+15 … +25°C
+15 … +25°C
+15 … +25°C
+10 … +30°C
Display result
(depending on the set filter level)
Weighing pan size (W + D)
0.1 – 0.4
Application range (temperature):
Protection
mm
206 + 206
Protected against dust and water
* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
9
Verified Models with EC Type Approval Certificate: Precision Balances
Models
6202S-xCE
6202P-xCE
5202S-xCE
4202S-xCE
Accuracy class*
K
K
k
K
0.01 | 0.02 | 0.05
0.01
0.01
For verified models: EC Type Approval Certificate D09-09-015. Type: MSX
Scale interval d*
g
0.01
Weighing capacity max*
g
6,200
1,500 | 3,000 | 6,200
5,200
4,200
Calibration value e*
g
0.1
0.1
0.1
0.1
Min. load min*
g
0.5
0.5
1
0.5
Application range according to DIR*
g
0.5 – 6,200
0.5 – 6,200
1 – 5,200
0.5 – 4,200
Min. initial weight**
g
12
12
10
12
Tare equalization range (subtractive)
< 100 % from max. weighing capacity
Typical stabilization time
s
<1
<1
< 0.8
< 0.8
Typical measurement time
s
< 1.5
< 1.5
<1
<1
With “isoCAL” function
+5 … +40°C
+5 … +40°C
+5 … +40°C
Without “isoCAL” function
+10 … +30°C
+10 … +30°C
+10 … +30°C
Display result
(depending on the set filter level)
0.1 – 0.4
Application range (temperature):
Weighing pan size (W + D)
mm
Protection
206 + 206
Protected against dust and water
Models
2202S-xCE
1202S-xCE
12201S-xCE
8201S-xCE
5201S-xCE
Accuracy class*
K
K
K
K
K
For verified models: EC Type Approval Certificate D09-09-015, Type: MSX
Scale interval d*
mg
10
10
100
100
100
Weighing capacity max*
g
2,200
1,200
12,200
8,200
5,200
Calibration value e*
g
0.1
0.1
1
1
1
Min. load min*
g
0.5
0.5
5
5
5
Tare equalization range (subtractive)
< 100 % from max. weighing capacity
Application range according to DIR*
g
0.5 – 2,200
0.5 – 1,200
5 – 12,200
5 – 8,200
5 – 5,200
Min. initial weight**
g
12
12
100
100
100
Typical stabilization time
s
< 0.8
< 0.8
< 0.8
< 0.8
< 0.8
Typical measurement time
s
<1
<1
<1
<1
<1
External standard calibration value
(min. accuracy class)
kg
2 (F1)
1 (F1)
10 (F1)
5 (F2)
5 (F2)
Application range (temperature)
With “isoCAL” function: +5 … +40°C | Without “isoCAL” function: +10 … +30°C
Display result
(depending on the set filter level)
0.1 – 0.4
Weighing pan size (W + D)
Protection
mm
206 + 206
Protected against dust and water
* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
10
Cubis® Leveling
Ø
The Cubis® shows the level indicator on the display and provides support for rapid leveling (as standard on the display and service units
MSA and MSU; on the MSE there are only symbols to support manual leveling).
1
Fully automatic, motorized Q-Level leveling at the touch of a button (available for all Cubis® weighing modules with a weighing capacity
of > 6.1 g and < 6200 g).
Test Certificates and Permits
ØØ
Standard certificate of conformity to specifications
TR
Like ØØ, but with a detailed test protocol
CE
Factory-calibrated with European calibration permit (not for models with DF draft shield)
Cubis® Draft Shields
DO
No draft shield. Please always enter this identifier for weighing modules with the weighing pan size 206 + 206 mm.
DE
Manual glass draft shield for precision balances with a readability of 1 mg.
DR
Flat, stainless steel weighing pan draft shield (removable, with no glass components) for all precision balances with a readability of 1 mg
and 10 mg – Weighing module 5202s
DU
Manual analytical balance draft shield with smooth-running, wide-opening doors, unimpeded access to the weighing chamber without
interfering braces. For all models with 0.01 mg, 0.1 mg and 1 mg readability.
DA
Automatic, motorized draft shield with learning capability for ergonomic working and individual adaptation to different applications.
or all models with 0.01 mg, 0.1 mg and 1 mg readability.
DI
Like the DA draft shield, but with the addition of an integrated ionizer to eliminate the impact of electrostatic charges in samples and
vessels.
DM
Automatic, motorized, 100 % glass draft shield with learning capability for ultramicrobalances and microbalances with a readability of
0.0001 mg and 0.001 mg (2.7S, 6.6S and 3.6P weighing modules).
DF
Manual draft shield made from stainless steel for weighing filters with diameters of up to 50 mm (75 mm and 90 mm optional).
(not possible in combination with weighing module 3.6P)
Optional Interface Modules
IR
RS-232 interface, 25-pin
IB
Bluetooth® interface
IP
RS-232 interface, 9-pin, incl. PS/2 interface
11
Cubis® Optional Accessories
Printers and Communication
Verifiable data printer for connection to RS-232, 25-pin. Accessory interface
®
YDP10-0CE
Verifiable data printer with Bluetooth data transmission (with YDO01MS-B or IB option only)
YDP10BT-0CE
Color ribbon for YDP10-0CE and YDP10BT-OCE
6906918
Paper rolls for printer YDP10-0CE; 5 rolls 50 m each
6906937
®
Bluetooth data interface for wireless connection of data printer YDP10BT
YDO01MS-B
RS-232C data interface, 9-pin including PS/2 for connecting a PC or keyboard
YDO01MS-P
RS-232C data interface, 25-pin for connection of Cubis® accessories
YDO01MS-R
Display cable 3 m for Cubis® MSA and MSU models for separated setup of display and weighing unit
(Installation by Sartorius Service or ex works [order VF4016])
YCC01-MSD3
Display cable 3 m for Cubis® MSE models, for separate setup of display and weighing unit
(Installation by Sartorius Service or ex works [order VF4016])
YCC01-MSED3
Cable 3 m between weighing module and electronics module for Cubis® models
with 0.01 mg | 0.001 mg | 0.0001 mg readability
YCC01-MSM3
Installation display cable 3 m for Cubis® models, for separate setup of display and weighing unit
VF4016
RS-232C connection cable to connect PC with 9-pin. COM interface, length 1.5 m
7357314
SartoCollect software for data communication between balance and PC
YSC02
®
Sartorius OPC Server for connecting all Sartorius Cubis balances
Requires 32-bit Microsoft Windows 2000 or XP with current service packs.
(free download of a 30-day trial version from the Sartorius website)
– Initial license
– Each additional license within an order
6289OPC
6289OPC-L
Displays and Input | Output Elements
MSA control unit with color TFT graphic display and touch screen
YAC01MSA
MSE display unit with backlit LC display and tactile keys
YAC01MSE
MSU display and control unit with backlit b | w graphic display and tactile navigation keys
YAC01MSU
Barcode reader with connection cable, 120 mm reading range
YBR03PS2
Foot switch for printing, taring, or using function keys, selection via menu, incl. T connector
YFS01
Infrared sensor for touch-free activation of functions (e.g., draft shield control)
YHS01MS
Hand switch for printing, taring, or using function keys, selection via menu, incl. T connector
YHS02
Foot switch for functions draft shield OPEN | CLOSED (in combination with DA and DI draft shields only), tare, and print
YPE01RC
Additional display, LCD, figure size 13 mm, backlit
YRD03Z
3-segment control display, red – green – red, for plus|minus measurements, incl. T connector
YRD11Z
12
Pipette Calibration Hardware and Software
Pipette calibration kit (hardware) for models with 0.1 mg and 0.01 mg readability
Consists of moisture trap and all required adapters
YCP04MS
Pipette calibration kit (hardware) for microbalance weighing modules 6.6S and 3.6P
Consists of moisture trap and all required adapters
VF988
Pipette Tracker pipette calibration software. Software and user manual in English only.
YCP04-PT
Pipette Tracker Pro pipette calibration software, for use in regulated areas, networkable and validatable,
according to the 21 CFR Part 11 regulations. Software and user manual in English only.
YCP04-PTPro
Documentation basis for validation (IQ, OQ) of Pipette Tracker PRO version.
All documents are in English only.
YCP04-VTK
Filter Weighing and Antistatic Accessories
Antistatic weighing pan, diameter 130 mm, for weighing modules with a readability of 0.1 mg or 0.01 mg
YWP01MS
Filter weighing pan d 75 mm, for ultramicrobalance or microbalance models
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
VF2562
Filter weighing pan d 90 mm, for ultramicrobalance or microbalance models
(weighing modules 6.6S, 2.7S; only together with DF draft shield)
VF2880
Ionization blower to eliminate electrostatic charges on sample containers and samples
YIB01-0DR
Stat-Pen ionization probe for discharging electrostatically charged samples and filters
YSTP01
Special Applications
Density determination kit for solids and liquids for weighing modules with a readability of < 1 mg
YDK01MS
Density determination kit for solids and liquids for weighing modules with a readability of 1 mg
YDK02MS
Q-Grip, flexible holder for weigh-in containers and filters up to 120 mm diameter (replaces the original weighing pan;
for Cubis® models with 0.01 and 0.1 mg readability)
YFH01MS
Q-Grid grid weighing pan for Cubis® models with 10 mg or 100 mg readability for weighing in laboratory hoods, safety weighing
cabinets, or workbenches (smaller areas exposed to draft on the weighing pan; replaces the standard weighing pan)
YWP03MS
Weighing Tables
Weighing table made from synthetic stone, with vibration dampening
YWT03
Wall console
YWT04
Weighing table made from wood with synthetic stone for precise, reliable measurements
YWT09
Weighing Accessories
Weighing scoop made from chrome nickel steel, 90 + 32 × 8 mm
641214
Aluminum weighing scoop, 4.5 mg (250 pieces) for ultramicrobalance and microbalance models
6565-250
Aluminum weighing scoop, 52 mg (50 pieces) for ultramicrobalance and microbalance models
6566-50
Support arm for 10 | 100 mg precision weighing modules for raising MSE, MSU, and MSA display and control units
YDH01MS
The brand name and logo for Bluetooth® wireless technology are owned by Bluetooth SIG Inc. The use of this brand name and trademark by
Sartorius AG is under license. Other brand names and trademarks are the property of their respective owners.
13
Balance Dimensions
Ultramicrobalance | Microbalance control unit MSA | MSU with E-box
All dimensions are given in millimeters
14
Ultramicrobalance | Microbalance control unit MSE with E-box
All dimensions are given in millimeters
15
Ultramicrobalance | Microbalance weighing module with DM draft shield
All dimensions are given in millimeters
16
Ultramicrobalance | Microbalance weighing module with DF draft shield
All dimensions are given in millimeters
17
Semi-microbalances with Motorized Draft Shield
All dimensions are given in millimeters
Innenmaße Windschutz DU
Draft shield DU interior
dimensions
(H)250 + (W)192 + (D)154
18
Semi-micro and Analytical Balances with Manual DU Draft Shield
All dimensions are given in millimeters
Innenmaße Windschutz DU
Draft shield DU interior
dimensions
(H)261 + (W)193 + (D)191
19
Precision Balances with a Readability of 1 mg and Manual DE Draft Shield
All dimensions are given in millimeters
Innenmaße Windschutz
Windshield inside dimensions
(H)172 + (W)193 + (D)191
20
Precision Balances with a Readability of 1 mg and Framed DR Draft Shield
All dimensions are given in millimeters
21
Precision Balances with No Draft Shield
All dimensions are given in millimeters
22
Sartorius Weighing Technology GmbH
Weender Landstrasse 94-108
37075 Goettingen, Germany
Phone +49.551.308.0
Fax +49.551.308.3289
[email protected]
www.sartorius-mechatronics.com
Technical specifications subject to change
without notice.
Printed in Germany.
Printed on bleached, chlorine-free paper. | W
Publication No.: W--2025-e11083
Order No.: 98649-011-60
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement