AWL-400 - Install Guide

AWL-400 - Install Guide
NOTE
Please visit http://www.BenQ.com to download the lastest drivers & user
manuals.
Installation for Windows XP
1. Execute Setup.exe in the AWL400 directory in BENQ Wireless LAN CD. For
example, if your CD-ROM has a drive D, please execute D:\AWL400\Setup.exe.
2. Press Next button
1
BENQ Corporation
3. Press Finish.
4. Insert AWL400 USB Stick into your PC, and then Windows will show the dialog –
‘Found New Hardware Wizard’.
2
BENQ Corporation
5. Select ‘Install the software automatically (Recommended)’ and press Next
button.
Press Continue Anyway
3
BENQ Corporation
Please wait while coping files. This may take a long time.
6. Press Finish to complete the installation.
4
BENQ Corporation
Configuration Utility for Windows XP
NOTE
Windows XP built-in configuration utility is used to configure the wireless
network settings. At the first time, this utility will NOT let the wireless LAN card
automatically be associated with any access point until users select their network.
After complete installation, you will get the Wireless Network Connection Icon in the
System Tray. Wireless connection unavailable will appear if you don’t click the icon for
a long time.
Click on the Wireless Network
Connection icon. The Connect to
Wireless Network dialog will appear.
Select your network from the available
networks list and press Connect
button.
Now BenQ AWL400 is connected to
the BenQ network with excellent
signal strength.
5
BENQ Corporation
To set the network type, press Advanced button in the Wireless Networks page.
NOTE
To learn more about Windows XP built-in configuration utility,
please press Learn about setting up wireless network configuration
in the Wireless Networks page.
6
BENQ Corporation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement