PLANET WPG-130N User's manual
Add to my manuals
53 Pages
Planet WPG-130N is an 802.11n Wireless Presentation Gateway that allows multiple users to wirelessly connect their devices to a projector or display. It supports various devices, including laptops, tablets, and smartphones, making it suitable for use in classrooms, meeting rooms, and other collaborative environments. With its user-friendly interface and advanced features, the WPG-130N simplifies wireless presentations and enhances collaboration.
advertisement
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Copyright
Copyright 2013 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
PLANET makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not PLANET, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, PLANET reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.
All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
To assure continued compliance. (Example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions: (1)
This device may not cause harmful interference, and (2) this Device must accept any interference received, including interference that may cause undesired operation.
PLANET 802.11n Wireless Presentation Gateway
Federal Communication Commission (FCC) Radiation Exposure
WPG-130N
Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.
CE mark Warning
This is a class B device, in a domestic environment; this product may cause radio interference, in which case the user may be required to take adequate measures.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal
Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station
Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria Belgium, Denmark, Finland, and
France (with Frequency channel restrictions). Germany, Greece, Ireland, Italy, Luxembourg .The Netherlands,
Portugal, Spain, Sweden and United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states Iceland, Liechtenstein,
Norway and Switzerland.
WEEE regulation
To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.
Revision
User Manual for PLANET 802.11n Pocket Presentation Gateway
Model: WPG-130N
Version: 2
Rev: 2.1 (January, 2013) (2081-E60050-001)
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Contents
PRODUCT INTRODUCTION .....................................................................6
HARDWARE INSTALLATION .................................................................12
The Front Panel ............................................................................. 12
LED Indications.............................................................................. 12
The Rear Panel.............................................................................. 13
The Top Side.................................................................................. 13
WINDOWS CLIENT UTILITY–WPG ........................................................16
Show Login Code........................................................................... 18
Web Admin..................................................................................... 18
Search Server ................................................................................ 19
Projection Quality........................................................................... 20
Projection Source........................................................................... 20
Auto WiFi Connect ......................................................................... 22
Auto Power Manager ..................................................................... 22
Advanced Screen Capture............................................................. 23
Make WPG Token ........................................................................ 24
Copy Application to Desktop ........................................................ 26
Hot Key ....................................................................................... 27
About........................................................................................... 27
MAC OS X CLIENT UTILITY ...................................................................29
Mac OS X Quick Connection................................................................... 29
Download Mac OS X Client Utility .......................................................... 31
WEB UI MANAGEMENT .........................................................................34
WPG-130N Homepage.............................................................................. 34
System Status ................................................................................ 37
Network Setup ............................................................................... 38
OSD Setup..................................................................................... 42
Projection Setup............................................................................. 43
Change Passwords........................................................................ 43
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Reset to Default ............................................................................. 44
Firmware Upgrade ......................................................................... 45
Reboot System .............................................................................. 46
Chapter 1. PRODUCT INTRODUCTION
1.1
Package Contents
Thank you for choosing PLANET WPG-130N – the 802.11n Wireless Pocket Presentation Gateway.
Before installing the router, please verify the contents inside the package box.
WPG-130N × 1 5V DC Power adapter × 1 World-Wide Plug Set × 1
VGA CD-ROM × 1 Quick Installation Guide × 1
If there is any item missed or damaged, please contact the seller immediately.
6
1.2
Product Description
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Deliver High Smoothness Presentations Wirelessly
PLANET WPG-130N is a wireless presentation gateway based on IEEE 802.11n technology. It is equipped with a VGA video output interface. With the hardware decoding capability, WPG-130N can project high-definition video on the screen through wireless connection. It facilitates multiple users to freely display the presentations, images and videos wirelessly, and connect to a projector or LCD TV without swapping lots of cables.
High Speed 802.11n Wireless Connectivity
The WPG-130N features the latest IEEE 802.11n technology to provide improved wireless speed up to
150Mbps data rate and wider coverage. It is also backward compliant with 802.11g and 802.11b standards; thus it is totally unnecessary to change the existing network for maintaining connectivity.
4-to-1 Split Screen Projection
With this 4-to-1 split screen feature, WPG-130N supports up to four PC / Laptop screens can be projected to one projector in the same time. Thus the participants can easily do side-by-side comparison from four PC /
Laptop to increase meeting efficiency.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Pocket-size Design and Power over VGA (PoVGA)
PLANET WPG-130N is a pocket-size wireless presentation gateway with the dimension 92.3 x 40 x 22 mm and the weight 52g. The compact design of WPG-130N is convenient to connect with any projector and hidden very well once it is plugged into the VGA port of the projector. Furthermore, the WPG-130N supports
PoVGA (Power over VGA). It could be power supplied from the VGA connector of the compatible projectors.
Even the last cable on the device, the power cord, will also become unnecessary.
Easy to Use, Plug & Show
The connected users can directly download the embedded windows-based utility from the WPG-130N web UI or simply execute the utility from created USB token. It offers the most convenient way for the new user to make the presentation in seconds. Just link the PC / Laptop to WPG-130N wirelessly and the screen will be projected to the connected projector easily.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
AP Client Mode
You can enable the AP Client Mode function to make WPG-130N join the existing Access Point through Wi-Fi.
This feature provides the flexibility of wireless network deployment in enterprise environment. The participants in the meeting can enjoy surfing the Internet and access Intranet all the time, even while wireless presentations are projecting.
1.3
Product Features
Wirelessly Project Multimedia with Laptops and Macs
Up to 30FPS Network Screen Projection
Pocket Size, Easy Placement
4-to-1 Split Screen Projection
802.11n WiFi AP-and AP client modes
Plug & Show
Supports PoVGA (Power over VGA)
Web Browser Management
Windows XP / Vista / 7, Mac OS X support
Multiple Access
1.4
Product Specification
Product
Hardware Specification
Interfaces
WPG-130N
Video
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
VGA Port: D-Sub 15-Pin female port
Antenna
LED Indicator
Material
Dimension (W x D x H)
Weight
Power
Compatible Projectors with
PoVGA supported
Gain
Power
2dBi Dual PIFA Antenna
Plastic
92.3 x 40 x 22 mm
52g
External Power adaptor 5V DC input 1.2A
Supports PoVGA (Power over VGA)
Optoma EX542
Optoma EX612
Optoma EX615
Optoma EX762
Optoma EH1020
Wireless Interface Specification
Standard
Frequency Band
Wireless Data Rate
Wireless channel
Wireless Output Power
Receive Sensitivity
Wireless Security
Operation Mode
Compliance with IEEE 802.11n
Backward compatible with IEEE 802.11b/g
2.4~2.4835 GHz
Up to 150Mbps
America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
802.11b: 16 dBm +/-1.5dBm (11Mbps)
802.11g: 14 dBm +/-1.5dBm (54Mbps)
802.11n: 13 dBm +/-1.5dBm (HT 20 MCS7)
802.11b: 11M -76 dBm
802.11g: 54M -67dBm
802.11n: 65M HT20 -64dBm
150M HT40 -61dBm
IEEE Standard 64/128 bit WEP/WPA/WPA2-PSK
AP (Access Point)
AP-Client (Universal Repeater)
Video Display
Supported PC / Laptop
Resolution
Supported Output Resolution
SVGA (800x600) / XGA (1024x768)
SXGA (1280x1024) / WXGA (1280x768)
WSXGA (1440x900, 1600x1024) / UXGA (1600x1200)
WUXGA (1920x1200) / QXGA (2048x1536) / Others
VGA:
SVGA (800x600) / XGA (1024x768) /
WXGA(1280x768) / WXGA+(1280x800)
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
System Management
Protocol
IP configuration
Management:
Supported Windows Account
Right
Supported Operation System
Standard Conformance
IEEE Standards
Environment
Temperature
Humidity
TCP/IP
Automatic: DHCP
Manual: Static IP address
Web-based configuration
Administrators
Limited User
Guest
Windows XP/Vista/7
Windows Mobile 5/6
Mac OS X 10.4 or later
IEEE 802.11n (1T1R, up to 150Mbps)
IEEE 802.11g
IEEE 802.11b
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
Operating: 0 ~ 40 Degree C
Storage: -10 ~ 60 Degree C
Operating: 10 ~ 90% (Non-Condensing)
Storage: 10 ~ 80% (Non-Condensing)
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Chapter 2. HARDWARE INSTALLATION
Please follow the instructions below to build the wireless network connection between WPG-130N, display equipment and your computers.
2.1
Hardware Description
2.1.1 The Front Panel
The front panel provides a simple interface monitoring the wireless presentation gateway. Figure 2-1 shows the front panel of WPG-130N.
Front Panel
Figure 2-1 The WPG-130N Front Panel
Notice:
To Reset the WPG-130N to factory default:
1. Press and hold the button, and then plug in the DC jack of the AC adapter to power on WPG-130N. After 10~15 seconds, you can release the button. The WPG-130N will back to the factory default mode.
2. Be sure that you backup the current configuration of WPG-130N; else the entire configuration will be erased when pressing the “RESET” button.
2.1.2 LED Indications
The front panel LED indicates instant status of system power; and helps monitor and troubleshoot when needed. Below table show the LED indications of the Pocket Presentation Gateway.
LED Description
Red Device initializing or system error
2.1.3 The Rear Panel
Rear Panel
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
2.1.4 The Top Side
Figure 2-2 The WPG-130N Rear Panel
2.2
Hardware Connection
Step 1. Please turn on your projector first, and connect the WPG-130N to the projector. Now you can power on WPG-130N.
Figure 2-3 VGA Interface Connection
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Step 2. When the projector shows the default screen as below, it indicates WPG-130N is ready now.
Figure 2-4 Projector Default Screen
If the screen is out of range, please turn off the projector or monitor first. Then turn on the projector or monitor again to reset the configuration.
Step 3. User your laptop or desktop to site survey the wireless signal of WPG-130N, and connect your PC with it wirelessly. The default SSID is WPG-130N.
Figure 2-5 Windows 7 Platform Wireless Site Survey
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Step 4. Open the web browser and it will redirect to WPG-130N web page automatically, or you can enter the default IP address 192.168.1.1 to access it.
Figure 2-6 WPG-130N Web UI Screenshot
Now you can configure the WPG-130N and download the client utility (WPG) of Windows 7/Vista/XP or Mac
OS X via web UI. For further information of the configurations, please refer to the following chapters.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Chapter 3. WINDOWS CLIENT UTILITY–WPG
3.1
Starting Program
After installing WPG (Wireless Presentation Gateway) utility downloaded from the web page of WPG-130N, please follow the steps below to start.
Step 1. Click WPG icon on the desktop to execute the problem.
Step 2. WPG will start to search the available access points automatically if you have not connected your
PC to WPG-130N manually. When the WPG-130N is displayed in the list, please click it to connect and then enter the Login Code shown on the projector screen.
Figure 3-1 WPG Utility – Access Point Connection
Figure 3-2 WPG Utility – Access Point Login
Step 3. Click the button to start projection
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
3.2
Control Panel
Figure 3-3 WPG Utility – Control Panel
Figure 3-4 WPG Utility – Control Panel Function Introduction
Button Description
Start Full Screen Projection
Project to Split No. 1
Button Description
Project to Split No. 4
Stop projecting
Project to Split No. 2 Freeze The Projection Screen
Project to Split No. 3
Please refer to the following sections for detailed instructions of the menu.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
3.2.1 Show Login Code
Click “Show Login Code”, and the login code will be displayed on the left-upper of the desktop and disappeared automatically after 10 seconds. You can also click on the area to close this window manually.
Figure 3-5 WPG Utility – Show Login Code
3.2.2 Web Admin
Click “Web Admin” to open the web UI page of WPG-130N. With regard to the web management UI page, please refer to the next chapter.
Figure 3-6 WPG Utility – Web Admin
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 3-7
3.2.3 Search Server
Click “Search Server” to re-search the wireless signal of WPG-130N again.
Figure 3-8 WPG Utility – Search Server
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
3.2.4 Projection Quality
Click the “Projection Quality”, choose “Normal” for faster projection speed with lower screen image quality, and “Best” for clear screen image quality but slower projection speed.
3.2.5 Projection Source
Figure 3-9 WPG Utility – Projection Quality
After clicking the “Projection Source”, you can select to project the main screen of the desktop or the virtual extended screen.
Figure 3-10 WPG Utility – Projection Source
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Main Screen
Virtual Extended
Screen
When “Main Screen” is selected, WPG-130N will project out the main desktop screen.
When “Virtual Extended Screen” is selected, WPG-130N will project out the virtual screen.
The virtual second monitor is invisible, but it is just right of the main one. Just pull the presentation item out of right side screen, and you’ll see it appears on the projector screen.
Figure 3-11 Virtual Extended Screen
Before starting the Virtual Extended Screen projection, please install the “VDD.exe” (Virtual Display Driver) first on your Windows XP computer. Please find the software in the CD-ROM.
If the screen below appears during the installation of VDD in Windows XP, please click “Continue Anyway” button to continue.
Figure 3-12
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
3.2.6 Auto WiFi Connect
Click “Auto WiFi Connect” to enable the auto WiFi discovery and connection function for quick wireless connection established.
Figure 3-13 WPG Utility – Auto WiFi Connect
3.2.7 Auto Power Manager
If “Auto Power Manager” is enabled, WPG will turn the Windows Power Scheme from current settings to
“High Performance” for getting the highest projection performance. However, you can still click it again to disable this function, and restore your power scheme immediately.
Figure 3-14 WPG Utility – Auto Power Manager
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
3.2.8 Hide UI
You can click “Hide UI” to hide the WPG control panel from projection screen.
Figure 3-15 WPG Utility – Hide UI
3.2.9 Advanced Screen Capture
If you enable “Advanced Screen Capture”, all the tip windows and other layered windows (include the main
UI) will be projected to the projector screen. However, the mouse cursor may blink from time to time when it is projecting.
Figure 3-16 WPG Utility – Advanced Screen Capture
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
The Source Screen with Tip Window
The Projector Screen without Tip Window
Figure 3-17
3.2.10 Make WPG Token
Click “Make WPG Token” to make a USB WPG Token, then you can insert the USB drive to any PC you want to make a presentation without installing any driver. Follow the instructions below to make the WPG Token.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 3-18 WPG Utility – Make WPG Token
Figure 3-19
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 3-20 WPG Utility – Copy Application to Desktop
Figure 3-21 WPG Application to Desktop
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
3.2.12. Hot Key
Click “Hot Key” to show the guide of hot key. You can use the hot key to control the projection by keyboard.
Figure 3-21 WPG Utility – Hot Key
3.2.13. About
Click “About” to show the system information. It includes the client version, server IP address, and login code.
Figure 3-22 WPG Utility - About
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
3.2.14. Exit
Click “Exit” to exit the WPG utility. It will stop the current projection and close the application immediately.
Figure 3-23
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Chapter 4. MAC OS X CLIENT UTILITY
4.1. Mac OS X Quick Connection
Step 1: Right-Click on the network icon displayed in the system tray
The AirPort Network Connection menu will appear
Figure 4-1
Step 2: Highlight and select the wireless network (SSID) to connect
(1) Select and SSID [WPG-130N]
(2) Double-click on the selected SSID
Figure 4-2
Step 3: Enter the encryption key of the WPG-130N
(1) Enter the encryption key that configured in section 5.4.2
(1) Click the [Join] button
Figure 4-3
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
If you will connect this WPG-130N in the future, check [Remember this
network].
Step 4: Check if the AirPort is connect to the selected wireless network.
If “Yes”, then there will be a “check” symbol in the front of the SSID.
Step 5: Open the web browser and it will redirect to WPG-130N home page automatically. Or you can enter the default IP address http://192.168.1.1
to access it.
Figure 4-4
After a moment, the main screen appears as Figure 4-5
Figure 4-5
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
4.2. Download Mac OS X Client Utility
Step 1. : Click “Download”.
Step 2. : Choose the utility for “MAC”, then click Download button to download utility.
Figure 4-6
Figure 4-7
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Step 3. : To install the WPG on the iMAC or Macbook OSX system, drag the WPG icon onto the Applications folder or to the Dock.
Figure 4-8
Step 4. Click “WPG” icon to execute the program.
Step 5. WPG will start to search the available access points automatically if you have not connected your
MAC to WPG-130N manually. When the WPG-130N is displayed in the list, please click it to connect and then enter the Login Code shown on the projector screen.
Figure 4-9
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Step 6. Once the WPG-130N is connected, the application will temporarily adjust your PC resolution for best projection result, and then project your screen to projector or TV.
Figure 4-10
You should see your PC Desktop on projector or TV screen now.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Chapter 5. WEB UI MANAGEMENT
5.1. WPG-130N Homepage
Please follow the steps below to enter the web UI of WPG-130N.
Step 1. First, please connect your Laptop to WPG-130N wirelessly.
Step 2. Open the web browser and it will redirect to WPG-130N home page automatically. Or you can enter the default IP address http://192.168.1.1
to access it.
Figure 5-1
After a moment, the main screen appears as Figure 5-2
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 5-2
The following sections will introduce the detailed instructions of the web UI functions.
5.2. Download
Please follow the steps below to download and execute the WPG installation program.
2 Choose the WPG utility for “Windows 7 / Vista / XP” or “Mac OS X”, then click Download button and execute the installation program.
3 Follow the instructions of the Installation Wizard to proceed till the installation process complete. Once installation complete, a WPG utility shortcut will appear on the desktop.
If the “Windows Security Alert” pops up, just press “Unblock” button to continue the installation.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 5-3
5.3. Admin
This function allows you to login web management UI of WPG-130N. Click “Admin”, and enter the password.
The default value is “admin”. Then click the Login button or press the Enter key.
Please refer to the following sections for further configuration of the web management UI.
Figure 5-4
Default IP Address: 192.168.1.1
Default Password: admin
After entering the password, the main screen appears as Figure 5-5
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
5.3.1 System Status
In this page can show the current status and some basic settings of the presentation gateway.
Figure 5-5
Object
Model Name
Firmware Version
Network Status
IP Address
Subnet Mask
Default Gateway
Description
Product model name
Product firmware version number
The IP address of WPG-130N
The subnet mask
The default gateway
Wireless MAC Address The wireless MAC address
Wire MAC Address
Connection Status
Projecting Status
The wire MAC address
It shows “Waiting for projecting” or “Projecting”.
Total Users The number of users who has already login into WPG utility
Table 5-1
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
5.3.2 Network Setup
This page is used to configure the parameters for the local area network which connects to the wireless interface. Here you may change the setting for IP address, subnet mask, DHCP server, etc..
IP Setup
Figure 5-6
The page includes the flowing detail fields:
Object
IP Setup
Description
Obtain IP address automatically
If you select this option, the WPG-130N will detect the network environment automatically.
When WPG-130N is connected to a LAN that has DHCP
server, the clients of WPG-130N will be assigned an IP by that server and the built-in DHCP server of
WPG-130N will be disabled.
When the WPG-130N is connected to a LAN that does
not have any DHCP server, the built-in DHCP server of
WPG-130N will be enabled and the clients of WPG-130N will obtain IP address by itself.
Or you can select this option to use the fixed IP address for
WPG-130N. (Default Settings)
Use the following IP address
IP Address
Subnet Mask
The default value is 192.168.1.1
The default value is 255.255.255.0
Default Gateway The default value is 192.168.1.1
DNS Server The default value is 192.168.1.1
DHCP Server Setup
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 5-7
The page includes the flowing detail fields:
Description Object
DHCP Server Setup
Auto
Disable
Select “Auto” to enable the built-in DHCP server of
WPG-130N. (Default Settings)
Start IP
End IP
The default value is 192.168.1.11
The default value is 192.168.1.254
Subnet Mask The default value is 255.255.255.0
Default Gateway The default value is 192.168.1.1
DNS Server The default value is 192.168.1.1
Or you can select this option to disable the DHCP server of
WPG-130N.
Wireless Setup
Figure 5-8
The page includes the flowing detail fields:
Description Object
Wireless Setup
Wireless LAN The option for enabling or disabling wireless LAN function
Region
SSID Broadcast
Channel
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Embedded AP
SSID
You can configure the SSID string here when Wireless LAN is enabled.
The default value is “Worldwide”.
The default value is “Enable”.
If you select “Auto”, the WPG-130N will scan all of the wireless channels and choose a clear one automatically.
Encryption
Key
Or you can select a fixed channel.
The option of wireless security. You can select one of :
WEP
WPA-PSK
WPA2-PSK
Disable
If Encryption is enabled, you have to set the key according to the encryption mode you selected.
AP Client Setup
Enable the “Connect to Existing AP” make the WPG-130N can join other access point wirelessly. Besides, the clients can also login WPG-130N for presentation and surf the Internet via other AP simultaneously.
The WPG-130N supports multiple encryption methods in wireless security. Please make sure you have entered the correct existing WiFi SSID, encryption type, and key of your main AP.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 5-9
The page includes the flowing detail fields:
Object
AP Client
Connect to Existing AP
Description
Encryption
The option for enabling or disabling AP Client mode. By this feature you can join other existed Access Point wirelessly.
Existing AP
SSID
Enter the SSID of the existed AP here when AP Client mode is enabled.
The WPG-130N supports multiple encryption methods of wireless security. Please choose the same encryption method of wireless security with the existed AP you want to join.
Key Enter the key of the existed AP you want to join.
Table 4-2
The wireless security of WPG-130N supports AES (Advanced Encryption
Standard).
Click the Apply button to make the changes to take effect.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
5.3.3 OSD Setup
Users can customize their own OSD (on-screen display) standby image.
Figure 4-8
The web page includes the flowing fields:
Object
Restore Initial
Image File Upload
Screen Information
Description
Restore to the default OSD standby image.
Upload the customized OSD standby image.
(You need to use the provided IB Maker utility stored in the
CD-ROM to convert the image to the system defined format.)
You can choose to show the detailed information about projection and connection on the standby screen.
Table 4-3
Click the Apply button to make the changes to take effect.
5.3.4 Projection Setup
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 4-9
The web page includes the flowing fields:
Object
Resolution
Login Code
Description
VGA: WXGA+ (1280x800)
WXGA (1280x768)
XGA (1024x768) (Default setting)
SVGA (800x600).
HDMI: 720p (1280x720)
You can select “Disable”, “Random”, or “Use the following code” to set a specified 4-characters Number.
Table 4-4
Click the Apply button to make the changes to take effect.
5.3.5 Change Passwords
Users can change the login password. The length of password is up to 8 characters.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure 4-10
Click the Apply button to make the changes to take effect.
5.3.6 Reset to Default
This page allows you to reset the current configuration to factory default.
Figure 4-11
Click the Apply button to restore the WPG-130N to the factory default settings.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
5.3.7 Firmware Upgrade
This page allows you upgrade the WPG-130N firmware to new version. Please note, do not power off the device during the upload because it may crash the system.
Figure 4-12
If it is necessary to upgrade the firmware, please follow the steps below to operate carefully.
Step 1. First, download the latest firmware image file from PLANET official website.
Step 2. Click Browse button to specify the file you want to upgrade.
Step 3. Click Upgrade button to start.
Step 4. There will be a warning message shown and count down counter on the screen.
Step 5. After a few minutes, a complete message shown on the screen.
Step 6. Power off the WPG-130N, then power on it again.
Step 7. Login the web UI, and click Reset to Default to take effect.
When you upgrade its firmware, you may lose its current configurations. Do not turn off the
WPG-130N while the firmware is being upgraded, otherwise, the WPG-130N may be damaged.
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
New firmware versions posted at the website of PLANET Technology can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use.
5.3.8 Reboot System
Press Reboot to reboot system. Please wait for a few minutes and reload web page again.
Click Reboot button to restart the WPG-130N.
Figure 4-13
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Appendix A: Configuring the PCs
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.
1. Install TCP/IP component
1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel. tab in the appearing window.
3) Right click the icon shown below, select Properties on the prompt page.
Figure A-1
4) In the prompt page shown below, double click on the Internet Protocol (TCP/IP).
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure A-2 by default.
Now you have two ways to configure the TCP/IP protocol below:
Setting IP address automatically
Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the
Figure below:
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Figure A-3
Setting IP address manually
1 Select Use the following IP address radio button.
2 If the device's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254), and
Subnet mask 255.255.255.0.
3 Type the device’s LAN IP address (the default IP is 192.168.1.1) into the Default gateway field.
4 Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you can type the DNS server IP address which has been provided by your ISP
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Now click OK to keep your settings.
Figure A-4
PLANET 802.11n Wireless Presentation Gateway
WPG-130N
Appendix B: FAQ
FAQ1 : How to reset the WPG-130N to factory default?
[ANSWERS]
1) Power off the WPG-130N.
2) Press and hold the button, and then plug in the DC jack of the AC adapter to power on WPG-130N. After
10~15 seconds, you can release the button.
3) Now, you should be able to login the WPG-130N by default setting. (Default username and password are both “admin”.)
EC Declaration of Conformity
For the following equipment:
*Type of Product: 802.11n Pocket Presentation Gateway
*Model Number: WPG-130N
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.) is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to 1999/5/EC R&TTE.
For the evaluation regarding the R&TTE the following standards were applied:
EN 300 328 V1.7.1
EN 301 489-17 V2.1.1
(2006-10)
(2009-05)
EN 301 489-1 V1.9.2 (2011-09)
EN 55022 (2010 Class B)
EN 55024 (2010)
EN 61000-3-2 (2006 / A1:2009 / A2:2009)
EN 61000-3-3
IEC 61000-4-2
(2008)
(2008)
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 62311
EN 60950-1
Responsible for marking this declaration if the:
(2006 / A1:2007 / A2:2010)
(2004 / A1:2010)
(2005)
(2008)
(2009)
(2004)
(2008)
(2006 + A11:2009 + A1:2010 + A12:2011)
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Product Manager
Place Date Legal Signature
PLANET TECHNOLOGY CORPORATION
e-mail: [email protected] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528
EC Declaration of Conformity
English
Česky
Hereby, PLANET Technology Corporation, declares that this 802.11n Pocket Presentation
Gateway is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Společnost PLANET Technology Corporation, tímto prohlašuje, že tato 802.11n Pocket
Presentation Gateway splňuje základní požadavky a další příslušná ustanovení směrnice
1999/5/EC.
Lietuviškai
Magyar
Dansk
PLANET Technology Corporation, erklærer herved, at følgende udstyr 802.11n Pocket
Presentation Gateway overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF
Malti
Deutsch
Hiermit erklärt PLANET Technology Corporation, dass sich dieses Gerät 802.11n Pocket
Presentation Gateway in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten
Vorschriften der Richtlinie 1999/5/EG befindet".
(BMWi)
Eesti keeles Käesolevaga kinnitab PLANET Technology
Corporation, et see 802.11n Pocket
Presentation Gateway vastab Euroopa Nõukogu direktiivi 1999/5/EC põhinõuetele ja muudele olulistele tingimustele.
Ελληνικά
Español
Français
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ , PLANET Technology
Corporation, ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ 802.11n
Pocket Presentation
GatewayΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ
Por medio de la presente, PLANET Technology
Corporation, declara que 802.11n Pocket
Presentation Gateway cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE
Par la présente, PLANET Technology
Corporation, déclare que les appareils du 802.11n
Pocket Presentation Gateway sont conformes aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE
Italiano Con la presente , PLANET Technology
Corporation, dichiara che questo 802.11n Pocket
Presentation Gateway è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva
1999/5/CE.
Latviski
Ar šo PLANET Technology Corporation, apliecina, ka šī 802.11n Pocket Presentation
Gateway atbilst Direktīvas 1999/5/EK pamatprasībām un citiem atbilstošiem noteikumiem.
Nederlands
Polski
Português
Slovensky
Slovensko
Suomi
Svenska
Šiuo PLANET Technology Corporation,, skelbia, kad 802.11n Pocket Presentation
Gateway tenkina visus svarbiausius 1999/5/EC direktyvos reikalavimus ir kitas svarbias nuostatas.
A gyártó PLANET Technology Corporation, kijelenti, hogy ez a 802.11n Pocket
Presentation Gateway megfelel az 1999/5/EK irányelv alapkövetelményeinek és a kapcsolódó rendelkezéseknek.
Hawnhekk, PLANET Technology
Corporation, jiddikjara li dan 802.11n Pocket
Presentation Gateway jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC
Hierbij verklaart , PLANET Technology
orporation, dat 802.11n Pocket Presentation
Gateway in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG
Niniejszym firma PLANET Technology
Corporation, oświadcza, że 802.11n Pocket
Presentation Gateway spełnia wszystkie istotne wymogi i klauzule zawarte w dokumencie „Directive 1999/5/EC”.
PLANET Technology Corporation, declara que este 802.11n Pocket Presentation
Gateway está conforme com os requisitos essenciais e outras disposições da Directiva
1999/5/CE.
Výrobca PLANET Technology Corporation, týmto deklaruje, že táto 802.11n Pocket
Presentation Gateway je v súlade so základnými požiadavkami a ďalšími relevantnými predpismi smernice 1999/5/EC.
PLANET Technology Corporation, s tem
potrjuje, da je ta 802.11n Pocket
Presentation Gateway skladen/a z osnovnimi zahtevami in ustreznimi določili Direktive
1999/5/EC.
PLANET Technology Corporation, vakuuttaa täten että 802.11n Pocket Presentation
Gateway tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar, PLANET Technology
Corporation, att denna 802.11n Pocket
Presentation Gateway står i
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 PRODUCT INTRODUCTION
- 6 Package Contents
- 7 Product Description
- 9 Product Features
- 10 Product Specification
- 12 HARDWARE INSTALLATION
- 12 Hardware Description
- 12 The Front Panel
- 12 LED Indications
- 13 The Rear Panel
- 13 The Top Side
- 13 Hardware Connection
- 16 WINDOWS CLIENT UTILITY–WPG
- 16 Starting Program
- 17 Control Panel
- 18 Show Login Code
- 18 Web Admin
- 19 Search Server
- 20 Projection Quality
- 20 Projection Source
- 22 Auto WiFi Connect
- 22 Auto Power Manager
- 23 Hide UI
- 23 Advanced Screen Capture
- 24 Make WPG Token
- 26 Copy Application to Desktop
- 27 Hot Key
- 27 About
- 29 MAC OS X CLIENT UTILITY
- 29 Mac OS X Quick Connection
- 31 Download Mac OS X Client Utility
- 34 WEB UI MANAGEMENT
- 34 WPG-130N Homepage
- 35 Download
- 36 Admin
- 37 System Status
- 38 Network Setup
- 42 OSD Setup
- 43 Projection Setup
- 43 Change Passwords