DF-16 User Manual

DF-16 User Manual
-
и
Fd -
- .
2° € +
rn HIGH PERFORMANCE
| WIRELESS SECURITY SYSTEM
e emia
Owner's Manual
Copyright € 1996 Linear Corporation Issue Date 6/96 212916 A Li near
EXIME
CONGRATULATIONS for selecting Linear" s Security System. The DF-16
-onsole incorporates many advanced and sophisticated features. The system
an be expanded and customized to fit the installation's specific needs.
he Console and its accessories are designed and manufactured by the oldest
jireless security company in North America. You can look ahead to many years
f reliable service with this Console and its accessories.
or a UL smoke alarm system, there must be at least one smoke detector
rogrammed into the Console to meet National Fire Protection Association
NFPA) Rule 74 and UL 217 requirements. Many insurance companies require
ou to meet these requirements to qualify for a discount, Only use the Model
F-71 smoke detector with this Console for a UL smoke alarm system.
this manual, the bullets preceding the text help to define the step. For example:
* This symbol indicates a feature.
EN This symbol indicates an action to perform.
¥ This symbol is for lit indications or system
sounds.
Ao 0 This symbol is for important notes.
E VACUATION PLANNING
or systems that include fire protection, UL requires that the following
formation be available to the users of the system.
raw up a floor plan showing two exits for each room.
he following procedures are to be discussed with the family:
(1
O Status of bedroom doors.
2 familiarity with alarm signals.
© Testing of door during a fire and use of alternate escape route if door is
hot to touch.
(à Crawling and holding breath.
® Escape fast. No stopping for packing.
® Meet at designated outdoor spot.
@ Emphasize that no one is to return to a burning house.
® Fire department notification from a neighbor's phone.
®@ Periodic rehearsal is to be conducted.
TABLE OF CONTENTS
SENSOR BATTERY REPLACEMENT
REMOTE CONTROL BATTERY REPLACEMENT
— ATL PE a -
о мо лье юм m
Ca A
Mo TT ME
ZEN
ELO A
rs ui
ANTENNA
* Receives signals from the system's sensors.
* Can be rotated towards the top of the Console case for wall mounting.
STATUS INDICATORS
* indicates the status of each of the system's sensors.
* Lights show which doors and windows are open.
* Lights flash to display sensors that have caused an alarm.
* Lights blink to show any sensors that have a low battery.
* Stick-on labels are provided to identify your custom sensor locations.
HINGED TOP COVER
* Flips open to access special system features.
* Can be locked closed for system security.
VOLUME CONTROL
* Varies the volume of the advisory tones that come from the speaker.
* Does not affect intemal or accessory sirens (they are always full volume).
LEARN BUTTON
* Used to place the Console into the Learn Mode.
* Leam Mode is used to add additional sensors to the system (up to 16 total).
* The secret code can be changed using Learn Mode.
* Various advanced system programming options can be made in Leam
Mode. -
FUSE HOLDER
* Holds fuse for the backup battery.
* If the POWER light is flashing and the optional backup battery is
installed and charged, check this fuse. (Pull fuse holder straight up.)
BACKUP BATTERY LOCATION | .
* Space for 12-volt, 1.2 amp/hour backup battery. (Highly recommended.)
* Backup battery is automatically charged and monitored by the Console.
%* Backup battery can power the Console for up to 6 hours.
* UL NOTE: Normal estimated battery life should be 3 to 4 years.
—— 7 ml
8 SIREN SPEAKER
* Makes unique sounds for burglary, fire and emergencies.
* Alarm siren stops automatically after five minutes.
* Sounds advisory tones to confirm keystrokes from the Console.
* Sounds mode selections tones.
* Sounds alarm memory tones.
* Beeps when Automation Output is activated. '
9 EMERGENCY BUTTON
* Pressing the [EMERGENCY] button for two seconds sounds the emergency
siren.
* Sends an “emergency” message to a central monitoring station through
the Emergency Dialer (if dialer is programmed).
* Works even when system is disarmed.
* IMPORTANT: For personal emergency use only. Not for use as a
UL Listed Medical Alert System.
10 POWER LIGHT
+
и
* Glows when AC powerison.
* Dims when AC power is off and backup battery is installed.
: * Blinks when the backup battery is low, recharging or missing.
> % Off when AC power is off and no backup battery is installed (system disabled).
11 MODE BUTTONS
Xx Used lo control the Console.
OFF
CHIME
HOME
AWAY
TEST
12 KEYPAD
* Off Mode disarms the system.
* Switching to Off Mode stops the alarm siren.
v Multiple beeps sound and status lights flash if an alarm has occurred.
sw Multiple beeps mean caution. AN INTRUDER MAY STILL BE IN YOUR HOME.
Chime Mode disarms the system.
Switching to Chime Mode stops the alarm siren.
v Multiple beeps sound and status lights flash if an alarm has occurred.
"e Multiple beeps mean caution. AN INTRUDER MAY STILL BE IN YOUR HOME.
Chime Mode is for monitoring doors and windows.
Y Use this mode as an "automatic door chime” when at home.
Y Opening any protected door or window causes Console to “ding-dong”.
* Home Mode arms the perimeter sensors, but not the interior sensors.
Y Use this mode when anyone is staying behind.
Interior motion detectors and interior door sensors are not armed.
+ +
*
* Away Mode arms the entire system.
Y Use this mode when leaving home.
Y Door sensors set for delayed will have a delay that allows you to leave and enter
the premises without sounding the alarm.
v/ Entry Delay beeps wam you to disarm the system before the siren starts.
* Test Mode is for testing the system sensors.
v All sensor status lights blink when the Test Mode is entered.
v Each sensor status light will stop blinking when its sensor is tested.
Hold the [TEST] button down to test all of the Consoles indicator lights.
+
For entering the secret code (numerically or alphabetically).
Secret code must be entered before switching to Off, Test or Learn Modes.
Used when programming system options.
Press [AUTO] key to activate Automation Output.
Press the [+] key to ciear keypad if the wrong key is pressed.
+ ++ + *
a"
SE i
OFF MODE
erm an
ene
“START HERE
+
| (OPTIONAL)
ГР
i
i
!
4 YOUR
2) SECRET
CODE
“orr.| 1 GONG
+
DONE
a
+
че. ори ae en ©
Poo
€ Use this mode to disarm the burglary
portion of the system.
4 Switching to Off Mode stops any audible
alarms in progress. В
€ The emergency functions are still active in
Off Mode and can be triggered by pressing
the [EMERGENCY] button.
— 5% Switch to Off Mode by entering the secret
code, and pressing [OFF].
3% When the system is disarmed to Off Mode,
the Console will sound one “Gong”.
M If an alarm has occurred, multiple beeps will
sound after disarming and the sensor light
for the sensor(s) that caused the alarm will
flash.
#13 NOTE: In Off Mode, protected doors and
"windows cannot trigger the burglary alarm.
}3. USING THE SYSTEM AT HOME
HOME MODE
START HERE
+
(OPTIONAL)
YOUR
SECRET
CODE
1 GONG &
2 BEEPS
WA AAR SA ARR A RA A A A a
START HERE
+ HOLD
some| DOWN
+ 2BEEPS
DONE
Le LA
;
|
A SE EN
>
-
>
`
> THA re NADA A
* Use this mode when sleeping or when
anyone is staying inside.
* Home Mode causes an instant alarm when
any perimeter sensor switched to INSTANT
is triggered.
® Home Mode causes a delayed alarm when
any perimeter sensor switched to DELAYED
is triggered.
® Alarm siren stops automatically after five
minutes and the system will remain armed.
Y Home Mode ignores all interior sensors
(optional interior motion detectors).
"3 Arm to Home Mode by entering the secret
code, and pressing [HOME].
3 You can “Quick Arm” to Home Mode from
Off or Chime Mode by holding down the
[HOME] key for two seconds.
* When the system is armed to the Home
Mode, the Console will sound a “Gong” and
two “Beeps”.
v Enter the secret code and press [OFF] or
[CHIME] to disarm from Home Mode and/or
stop the alarm siren.
Ж If an alarm has occurred, multiple beeps will
sound after disarming and the sensor light
for the sensor(s) that caused the alarm will
flash (switch to Off Mode again to stop
flashing alarm memory light).
KEYCHAIN TRANSMITTER
Provides remote
system access
from outside the home.
Provides remote panic
activation for personal
protection.
Automation feature can
activate lights with a push of
a button.
REMOTE KEYPAD
Provides control for the entire
system.
DOOR/WINDOW SENSORS
Can also guard areas such as gun
cabinets.
GLASS BREAK DETECTOR
Triggers the alarm the instant glass
is broken.
SMOKE DETECTOR
Equips your security system for fire
protection.
[= > |
|
INFRARED MOTION DETECTOR
Provides interior protection when
monitored area is entered. Body
heat activates sensor.
—
т
О
SECURE EXIT
55 If the system is already in the Home Mode
and you want to exit the premises while
leaving someone inside with the system still
in Home Mode, press the [HOME] key for two
seconds.
*¥ A™gong” and two “beeps” will sound and
the HOME light will blink for 30 seconds.
€ You can leave through a door with a
delayed perimeter sensor during the 30
second Exit Delay without causing the
Console to begin an Entry Delay.
AUTOMATIC BYPASSING OF SENSORS
— € The Console can be armed with open door
or window sensors.
* The system will automatically “bypass”
open doors and windows after sounding
four high-low beeps to warn you that a
protected door or window is open.
* Lit sensor status indicators show which
sensors are open.
* Bypassed sensors cannot cause an alarm
until they are “restored” (closed).
DS’ If you close the door or window after arming
the system, the sensor will be restored and
can cause an alarm the next time it is
opened.
€ Automatic bypassing of sensors in the
Home Mode allows you to arm the system
at night with open windows, while still
having perimeter protection with other
closed doors and windows.
-— re
des
“4: USING THE SYSTEM WHEN LEAVING ”
AWAY MODE —
; START HERE
ох
| (OPTIONAL)
Me. il SR nt. RI ai A
YOUR |
SECRET |
CODE
| 4
| ;
| 1 GONG &
| АМА 3 BEEPS |
т
| DONE
START HERE ;
+ HOLD
DOWN
AU 1 GONG &
+ 3 BEEPS
DONE
TEE TA A Ae AE RAR RA rd A
€ Use this mode when no one will be staying
home. '
€ Away Mode causes an instant alarm when
any perimeter sensor switched to INSTANT
is triggered.
€ Away Mode causes a delayed alarm when
any perimeter sensor switched to DELAYED
is triggered.
€ Away Mode causes an instant alarm when
any interior sensors (optional interior
~ motion detectors) are triggered. The interior
sensors will be delayed if a perimeter
delayed sensor is triggered first.
€ Alarm siren stops automatically after five
minutes and the system will remain armed
This can occur an unlimited number of times.
53 Arm to Away Mode by entering the secret
code, and pressing [AWAY].
IF You can “Quick Arm” to Away Mode from
Home, Chime or Off Mode by holding down
the [AWAY] key for two seconds.
EXIT DELAY (For Leaving the Premises)
EXIT
DELAY
SECONDS
>} When the system is armed to the Away
Mode, the Console will sound a “Gong” and
three “Beeps”.
À During the Exit Delay, the Console will
sound “beeps” and the AWAY light will blink.
* The Exit Delay gives you time to leave the
premises through a delayed perimeter door
without triggering an alarm.
3 When the Exit Delay is over, the Console
will sound one “gong” to warn you that the
system is fully armed.
ENTRY DELAY (For Entering the Premises)
* The Entry Delay gives you time to enter the
premises through a delayed perimeter door
“ENTRY suenan lam. EE
DELAY
without triggering an alarm.
Ф If a perimeter delayed sensor is triggered,
starting the Entry Delay, the interior
sensors will also become delayed (this
allows motion in the premises during the
Entry Delay).
** During the Entry Delay, the Console will
sound “beeps”.
Ф When the Entry Delay is over, the Console
will go into full alarm and sound the siren if
it is not disarmed to the Off or Chime Mode.
v If an alarm has occurred while you
were gone, multiple beeps will sound
after disarming and the sensor light for
the sensor(s) that caused the alarm will
flash (switch to Off Mode again to stop
flashing alarm memory light).
s#if you hear the multiple beeps, use
caution when entering. AN
INTRUDER MAY STILL BE IN YOUR
HOME.
SECONDS
PATATE
CHIME MODE
| START HERE
(OPTIONAL)
YOUR
SECRET
CODE
Le
1 GONG &
1 BEEP
AUTOMATIC BYPASSING OF SENSORS
* The Console can be armed with open door
or window sensors.
* The system will automatically “bypass”
open doors and windows after sounding
four high-low beeps to warn you that a
protected door or window is open.
À
* Lit sensor status indicators show which
sensors are open
#3 NOTE: Bypassed sensors cannot cause an
alarm until they are “restored”.
€ If you close the door or window after arming
the system, the sensor will be restored and
can cause an alarm the next time it is opened.
€ Automatic bypassing of sensors in the
Away Mode allows you to arm the system
with open doors and windows, while still
having perimeter protection with other
closed doors and windows.
10
— 1 GONG4
+ 1BEEP
* Chime Mode is for monitoring entries and
exits without causing alarms.
€ Use Chime Mode as an “automatic door
chime” when at home.
3% Opening any protected door or window
causes the Console to sound a “ding-dong”.
ES Select the Chime Mode by entering the
secret code, then press [CHIME].
"3 You can enter Chime Mode from Off Mode
by holding down the [CHIME] key for two
seconds.
% When the system is switched to the Chime
Mode, the Console will sound a “Gong” and
one “Beep”.
* Going to Chime Mode disarms the system
and stops any alarms in progress.
Æ NOTE: In Chime Mode, protected doors and
windows cannot trigger the burglary alarm.
11
a
4 A В
BI-WEEKLY S
AR
YSTEM TESTING
TEST MODE
"START HERE : @ It is recommended that your system be
i | tested every two weeks.
(OPTIONAL) | € The Console must be in Off Mode before
+
going to Test Mode.
+ Switch the Console into Test Mode by
: ; entering the secret code and pressing [TEST].
+ YOUR } 3H When the system is switched to the Test
SECRET | | Mode, the Console will sound a “Gong” and
+ CODE . | four “Beeps”.
Co i = Holding down the [TEST] button will light all
of the Console's indicators.
+ : 3 The sensor status lights will flash for each
TEST 1 GONG & © sensor programmed into the Console.
|] 4BEEPS :. m= Go to each sensor and press its test button
J or open and close the protected opening.
DONE : IF To test the wireless keypad, press the [AUTO]
7. SENSOR BATTERY REPLACEMENT
&\
Po key.
HE As each sensor is tested, the sensor status
light for the sensor will stop flashing and
return to showing the current status of the
sensor.
3 The Console will make a “bing” sound as
each sensor is tested.
1 Continue testing until there are no flashing
status lights.
21 NOTE: If the Console is left unattended in
Test Mode, it will automatically switch back
to Off Mode after 3 minutes. |
WHEN CONSOLE INDICATES A SENSOR
LOW BATTERY, OPEN SENSOR CASE AND NY , .
GENTLY LFT UP END OF BATTERY LANE. — SIC When a sensor's status light on the Console
SLIDE BATTERIES OUT
blinks, the sensor has a low battery.
sartenveuæ mures 2 NOTE: Don't confuse a blinking status light
! | with a flashing status light (flashing light is
ba il! faster and indicates alarm memory).
y | comento | OF Refer to the figure when replacing
à EU door/window sensor batteries.
REMOVE BATTERIES
W NECESSARY FROM THIS END
FUSH IN SLOT TO REMOVE
SENSOR FROM MOUNTING PLATE
12
JE
REMOVE TWO
CASE SCREWS
CAREFULLY
LIFT TOP OF
CAREFULLY CASE OFF
REMOVE THE WARNING:
CIRCUIT BOARD HOLD BOARD BY
(4) 4 EDGES ONLY CAUTION: DO NOT
— TOUCH OR ADJUST
Le ANY PARTS ON BOARD
NOAND
POSTS
CN
—— LA > ALIGNMENT | (5)
+. NOTE BATTERY
LOCATIONS
PLACE BOARD Ha ое > >
ON ALIGNMENT Ea
POSTS
SQUEEZE TOGETHER
CASE TOGETHER,
FLIP OVER AND
REPLACE SCREWS
HOLD CASE TOGETHER
AND FLIP? OVER
PLACE FRESH BATTERIES
ON SPRING IN HOLDER
BATTERY SPRING
IS IN PLACE
BATTERY TYPE
CR1616, CR1620
OR DL1620
WARNING: DO NOT
INSTALL BATTERIES
_ BACKWARDS, UNIT
La WILL BE DAMAGED!
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement