Owner`s Manual - Innovative Marine

Owner`s Manual - Innovative Marine
Owner’s Manual
1
CONTENTS
TABLE OF CONTENTS
Important Safety Instructions
3-4
Parts—Exploded View & Identification
MiniMax Desktop
MiniMax MidSize
MiniMax FullSize
5
6
7
Introduction
MiniMax—All-In-OneReactor
Specifications
8
9
Getting Started
Unpacking & Inspection
Pump Assembly
Adding Media
Mounting Bracket Assembly
MiniMax Placement
DeskTop
MidSize
FullSize
Height Adjustment
10
10
11-12
13
14
14
15
16
MiniMax Controls
Water Flow Adjustment
17
Maintenance
Replacing Media
Pump Cleaning—Desktop
Pump Cleaning—MidSize
Pump Cleaning—FullSize
18
19
21
21
Notes
22
Warranty Information
23
Owner’s Product Information
24
2
To guard against injury, basic safety precautions should be observed
including the following:
READ ALL SAFETY INSTRUCTIONS BEFORE USE.
WARNING
To avoid electric shock, special care should be taken since water is
employed in the use of aquarium equipment. For each of the following situations, do not attempt to repair yourself. Return the appliance
to an authorized service facility for service or discard the appliance.







If the appliance falls into water, DO NOT reach for it! First unplug
it and then retrieve it. If the electrical components of the appliance get wet, unplug the appliance immediately.
Carefully examine the appliance after installation. It should not
be plugged in if there is water on parts not intended to be wet.
Do not operate any appliance if it has a damaged cord or plug, or
if it is malfunctioning or if it is dropped or damaged in any manner.
To avoid the possibility of the appliance plug or receptacle getting
wet, position aquarium to one side
of a wall mounted receptacle to
prevent water from dripping onto
the receptacle plug. A “Drip Loop”
should be arranged by the user for
EACH cord connecting an aquarium appliance to a receptacle. The
“Drip Loop” is that part of the cord
below the level of the receptacle or
the connector if an extension cord
Drip Loop
is used. This “Drip Loop” prevents
water travelling along the cord and
coming in contact with the receptacle. If the plug or the receptacle do get wet DO NOT unplug the cord. Disconnect the fuse to
the circuit breaker that supplies power to the appliance. Then
unplug and examine for the presence of water in the receptacle.
Close supervision is necessary when any appliance is used by or
near children.
To avoid injury, do not contact moving parts or hot parts such as
heaters, reflectors, lamps bulbs and etc.
Always unplug an appliance from the outlet when not in use, before putting on or taking off parts, and before cleaning. Never
yank the cord to pull plug from outlet. Grasp the plug and pull to
disconnect.
3
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
IMPORTANT SAFETY
INSTRUCTIONS

Do not use an appliance for other than intended use. The use
of attachments not recommended or sold by the appliance
manufacturer may case an unsafe condition.
Do not install or store the appliance where it will be exposed to
the weather or to temperatures below freezing.
Make sure an appliance mounted on a tank is securely installed
before operating it.
Read and observe all the important notices on the appliance.
This appliance has a polarized plug (one blade is wider than
the other). As a safety feature, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully
inserted. Do not attempt to defeat this safety feature.
This appliance is intended FOR HOUSEHOLD USE ONLY.
If an extension cord is necessary, a cord with a proper rating
should be used.






CLEANING


Always unplug the MiniMax before performing maintenance
or cleaning.
Make sure hands are dry before re-plugging into an approved
electrical outlet
4
PARTS
Exploded View
#
Description
Item
Code
1
MiniMax—Desktop Pump
730101
2
MiniMax—Desktop Outer Acrylic Chamber
730102
3
MiniMax—Desktop Inner Acrylic Chamber
730103
4
MiniMax—Desktop Cap
730104
5
MiniMax—Desktop Mounting Bracket
730106
5
PARTS
Exploded View
#
Description
Item
Code
1
MiniMax—MidSize Pump
020001
2
MiniMax—MidSize Outer Acrylic Chamber
730202
3
MiniMax—MidSize Inner Acrylic Chamber
730203
4
MiniMax—MidSize Cap
730204
5
MiniMax—MidSize Mounting Bracket
730206
6
PARTS
Exploded View
#
Description
Item
Code
1
MiniMax—FullSize Pump
020005
2
MiniMax—FullSize Outer Acrylic Chamber
730302
3
MiniMax—FullSize Inner Acrylic Chamber
730303
4
MiniMax—FullSize Cap
730304
5
MiniMax—FullSize Mounting Bracket
730306
7
INTRODUCTION
AUQA GADGETS are a new line of fresh & clever tools that aid in
your daily chores for your aquarium. Innovative design and simplicity are the core ingredients to save you time and frustration.
AUQA GADGETS series include SMART products that encompass maintenance, filtration, feeding, and organization to streamline your husbandry needs without the hassle.
DeskTop
Item#7301
MidSize
Item#7302
FullSize
Item#7303
Nano Reactor—Less is Definitely More
If you desire the highest water quality but are frustrated with media
reactors on the market… Meet the game changing MiniMax. The MiniMax All-In-One Media Reactor is a novel approach to optimize chemical and biological filtration for nano and mini marine aquariums. Its’
innovative Patent Pending design minimizes the need for flexible
tubes, pvc pipes, ball valves, thumb screws, and unnecessary clutter
that are usually associated with typical media reactors. Its’ ingenious
design maximizes performance and offers out of the box responsive
flow control, easy maintenance, low power consumption, and the
smallest form factor ever built. The versatile MiniMax is designed to
be discreetly hidden behind All-in-One Aquariums or placed directly in
sumps.
8











Offered in 3 convenient Models
Desktop – 150 ml Maximum Volume Capacity
Midsize – 350 ml Maximum Volume Capacity
Fullsize—1 liter Maximum Volume Capacity
All-In-One Design - For use with BioPellets, GFO, or Carbon
Made from quality cell cast acrylic - Bracket Included
Pump Included
Easy turn knob for Responsive Flow Control
Energy Efficient - 2.5 to 11 watt power consumption
Double O-Ring Seal
Small compact form factor
SPECS
MODEL
Dimensions w/
pump
Max Volume Capacity
Designed For
Power
Pump Watts
Max Flow Rate
7301—Desktop
7302—Midsize
7303—FullSize
2.2” x 2.3” x
11.41”
2.6” x 3.07” x
15.75”
5.31”x 4.8” x 17.13”
w/ Mounting Bracket
150 ml
350 ml
1 Liter
NANO 16
MICRO 30 & MINI
38
IN SUMP
110-120V/60HZ
110-120V/60HZ
110-120V/60Hz
8 WATTS
11 WATTS
2.5 WATTS
52 GALLONS
PER HOUR
92 GALLONS PER 211 GALLONS PER
HOUR
HOUR
9
INTRODUCTION
Features:
INTRODUCTION
MiniMax—DeskTop & MidSize
Unpacking and Inspection
Please inspect your new MiniMax Media Reactor and confirm all
parts are included before assembly.
Immediately report if there is any damage or missing parts to
[email protected]
Your MiniMax purchase should include:
1.
2.
3.
4.
Inner & Outer Acrylic Chamber
Double O-Ring Cap
Acrylic Bracket
(2) Foam Sponges (for use with fine media such as GFO &
Carbon)
5. Pump
MiniMax—DeskTop & MidSize
MiniMax Pump Assembly
1. Attach pump to underside of chamber
10
GETTING STARTED
Adding Media to the MiniMax
1. Grab turn knob and pull inner chamber out
of outer chamber.
2. Securely grab the cap and twist left to right while pulling
upwards.
3. The cap is held in place with O-rings
11
GETTING STARTED
Adding Media to the MiniMax
The MiniMax is designed to work with Bio Pellets, (GFO) Granular Ferric Oxide, or Pelletized
Carbon.
Generally, Bio Pellets require a stronger tumble,
while GFO and Pelletized Carbon require less
water flow to prevent crumbling. Please check
with the manufacturer’s instructions for volume
needed for your tank size and rinsing
procedures prior to adding media to reactor.
Note: The MiniMax includes two black sponges
for use with GFO and Pelletized Carbon. Insert
first
black sponge directly over the dispersion plate.
Add GFO or Pelletized Carbon and place second
black sponge below the top dispersion plate.
Bio Pellets do not require the two black sponges
Foam
Sponge
Remember to leave room for the
media to fluidize in reactor. We do
not recommend filling reactor to the
maximum volume capacity.
Please check with manufacturer’s
instruction for proper amount of
media needed for your specific set
up.
Foam
Sponge
12
GETTING STARTED
MiniMax Mounting Bracket Assembly
1. Slide bracket over MiniMax Outer Chamber body and
turn tightening screw for secure hold.
Clamp
Mount
Bracket
13
GETTING STARTED
MiniMax Placement—DeskTop
NANO 16
Reactor
Column
Reactor
Column
OverFlow
Column
OverFlow
Column
Return Pump
Column
MiniMax Placement—MidSize
MICRO 30 or MINI 38
Reactor
Column
OverFlow
Column
Reactor
Column
Return Pump
Column
OverFlow
Column
14
GETTING STARTED
MiniMax Placement—FullSize
Shown in Sump
15
GETTING STARTED
MiniMax Height Adjustment
The MiniMax includes an acrylic bracket to securely fasten to rimless tanks, sumps, and AIO divider baffles.
Once reactor is set in your desired position, adjust the
bracket height by sliding up/down over chamber. Finish
by tightening the two screws to secure reactor and
clamp to an edge.
MiniMax—is designed to be submerged in water and
should not be used as a hang-on type reactor out of water.
16
MiniMax reactors incorporate a responsive water flow adjusting knob. Since, different media require different flow
rates, this feature allows min to max flow settings with a
simple turn of the knob.
Turn knob to increase/decrease desired water flow.
17
MINIMAX CONTROLS
MiniMax Water Flow Adjustment
MAINTENANCE
Replacing Media- MiniMax
A
A. Slide out inner chamber by lifting up
on adjustment knob. Wait for 5 seconds for water to drain out bottom
before taking to sink.
B. Firmly grab cap lid and twist left to
right while pulling upwards.
C. Replenish media
C
B
18




Unplug MiniMax pump from electrical outlet before
performing any maintenance.
Pull entire MiniMax out
Drain water that is in the main body.
Disconnect pump from MiniMax
Removing Impeller
DESKTOP PUMP
  Unplug pump from power strip
  Slide the Impeller Cover off of pump motor shown below
  Lift the Impeller out of pump motor
19
MAINTENANCE
CLEANING / REMOVING PUMP
MAINTENANCE
MIDSIZE PUMP
  Unplug pump from power strip
  Slide the Impeller Cover off of pump motor shown below
  Lift the Impeller out of pump motor
FULLSIZE PUMP
  Unplug pump from power strip
  Turn the outlet coupling from lock position to open position shown below.
  Disassemble the outlet coupling from pump motor
  Lift out the impeller & shaft from pump motor
20
NOTES
21
LIMITED WARRANTY
WARRANTY INFORMATION
LIMITED 1 YEAR WARRANTY—
MiniMax
This MiniMax has a 1 YEAR limited warranty. The MiniMax is
warranted to the original purchaser against defective material
and workmanship for 1 YEAR from the date of original purchase. This warranty is valid only under the following conditions: additions, modifications, or changes made to the product
by the purchaser and not by the manufacturer shall void this
warranty. Damages brought on by abuse, misapplication, or
mishandling also voids this warranty.
This warranty is limited to the repair or replacement of the product at the discretion of the manufacturer. This warranty does
not cover personal injury, property loss, including livestock or
damage (direct, incidental, or consequential) arising out of use
of this product. This warranty gives you specific rights and you
may also have other rights, which may vary from state to state.
The Product Registration Card must be filled out completely
and returned within (14) days from the date of purchase. Failure to do so will void this warranty. A proof of purchase from
an authorized dealer must be provided when making a warranty claim.
For Warranty Claim please contact our Customer Care Department.
A RMA # must be issued before sending any product back to
Innovative Marine. Products sent back to Innovative Marine
without a RMA# will be not be accepted. Service on products
will not extend the original warranty period.
Email: [email protected]
22
OWNER’S PRODUCT
INFORMATION
PRODUCT INFORMATION
MODEL #
MINIMAX
SERIAL #
DATE OF
PURCHASE
Please keep your receipt in a safe place to ensure you have this information.
23
WWW.INNOVATIVE-MARINE.COM
A Division of
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement