Wireless Cartridge Machine
USER MANUAL
2019
INDEX
Safety Notice
3
Machine Overview
4
The Grip
5
The Body
6
The PowerBolt
7
Detaching PowerBolt
8
USB-C Connection
9
Connecting your Machine
10
Adjusting Needle Depth
11
Additional Information
12
Troubleshooting
13
USER MANUAL
SAFETY NOTICE
CLASS III SYMBOL
A Class III appliance is designed to be supplied from a separated/safety
extra-low voltage (SELV) power source. The voltage from a SELV supply is
low enough that under normal conditions a person can safely come into
contact with it, without risk of electrical shock. The extra safety features
built into Class I and Class II appliances are therefore not required. For
medical devices, compliance with Class III is not considered sufficient
protection, and further more-stringent regulations apply to such equipment.
TECHNICAL DATA
Operating Voltage:
5 - 12 V DC
Current:
.3 A
Stitch Frequency:
25 -160 Hz
Stroke:
3 mm
Connection:
USB-C
Drive:
Brushless 9 Watt motor
Operating Mode:
Continious operation
Ambient Temperature:
+10 to +35 °C
Relative Humidity:
30 to 75%
Dimensions (Ø X L):
35 x 125 mm
Weight:
Approx. 170 g
BARRIER PROTECTING YOUR MACHINE
Although the grip is autoclavable, we strongly suggest the use of barrier products to protect your
machine. For a visual demonstration of many barrier protection methods, please visit our YouTube
channel Microbeau.
“This machine is not to be used by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge”
3
USER MANUAL
MACHINE OVERVIEW
USB-C connectivity
Dynamic power path
management USB-C
Li-ion battery with
capacity and voltage
LED indicator.
Bluetooth enabled:
Pair with Darklab app.
Detachable battery:
instantly switch to
auxiliary battery
(sold separately)
9 Watt brushless motor
Ratcheted, adjustable
needle depth system
THE
SPEKTRA
FLUX S
Direct Drive: 3 MM stroke
Unleash your
Power
The first wireless pen-style
Ergonomic autoclavable
grip design for tattooing
machine featuring a detachable
battery, complete Bluetooth
connectivity, and a whole new
level of freedom.
4
USER MANUAL
THE GRIP
Spektra Flux S Grip
Autoclavable Ergonomic Grip Design
Compatible with most membrane needle
cartridges on the market
THE GRIP
The Flux S grip allows artists
options will be available soon.
anodized grip is safe to be
ratcheting control over needle
The Grip is crafted from a solid
sterilized under steam, in an
depth. The standard Grip has a
rod of 6061 T6 aircraft-grade
autoclave or sprayed with cold
diameter of 28mm. Other grip
aluminum. This polished and
sanitation solutions.
5
USER MANUAL
THE BODY
Spektra Flux S Body
Ratcheted Disk System
Flux S Body
THE BODY
Friction Stabilizing O-Rings
The Body is the core of the
machine. Constructed from a solid
rod of 6061 T6 aircraft- grade
aluminum, this module should
be sanitized by wiping it with cold
sterilization solutions only.
Caution: Avoid getting fluids into
the housing
Body Isometric View
6
Body Posterior View
USER MANUAL
THE POWERBOLT
Flux S PowerBolt
THE POWERBOLT
LED indicator:
Solid Color = Whole Value
Blinking Color = Half Increment
Ex. Solid green indicates 10V
Flashing green indicates 10.5V
Battery Level Check: Press and
hold power button till white. A
blinking colored light indicates
remaining charge.
Note: LED flashes while battery
charges. Once < 15% is reached, red
light will blink alternately with voltage.
LED Indicator
Voltage Up
100 - 98%
97 - 60%
59 - 40%
Power Button
Voltage Down
39 - 15%
14 - 0%
Working with modes: Modes work by pressing
and releasing the power button.
Bluetooth – Hold the power button until a blue light appears and
immediately release the power button. A blue blinking light indicates
pairing mode is available for 60 seconds. To deactivate Bluetooth, hold
the power button and release when the yellow light flashes.
USB-C
Travel Mode (Shutdown) – Press and hold the power button until the
red light flashes. This mode is for when you want to avoid unnecessary
discharge and / or comply with travel laws. To reactivate, connect /
disconnect to a USB-C port.
Reset (Factory Settings) – Should you experience abnormal behavior, hold the
power button and the voltage up button at the same time, then quickly release.
7
PowerBolt Top/ Bottom Views
USER MANUAL
DETACHING THE POWERBOLT
Twist the PowerBolt as
shown and remove.
Get a firm grip and turn the body
as shown with the Grip.
DETACHING THE POWERBOLT
To detach your PowerBolt,
To attach the PowerBolt, push
align correctly. Avoid contact
ensure you have a firm grip on
in while twisting clockwise.
with the PowerBolt leads while
the Body and Grip. Turn the
Ensure lock mechanism moves
recharging or servicing.
PowerBolt counter clockwise
freely. PowerBolt must sit
and pull out.
correctly to ensure power leads
8
USER MANUAL
USB-C CONNECTION
Fast charging speed: Up to 1.5 A
USB-C Connector
USB-C CONNECTION
This connecting terminal is compatible with most
USB-C cables on the market. We recommend you
use the included cable for recharging the PowerBolt.
USB-C Darklab supplied cord
9
USER MANUAL
CONNECTING YOUR MACHINE
1
Plug the USB-C cord into
the PowerBolt connector.
HOW TO
CONNECT
YOUR
MACHINE
Best connection
Improper connection
Insert the provided USB-C
while plugged in. The USB-C
cable into the back of the
connection is meant only for
PowerBolt and connect to a
recharging your PowerBolt.
Hover or power socket. Make
PowerBolt can be recharged
sure the cable is properly
whether or not it is connected
seated and is fully inserted
to the Flux S. If connecting to
into PowerBolt. The PowerBolt
a Hover, the charge speed will
is not meant to operate
be up to 1.5 A.
10
USER MANUAL
ADJUSTING NEEDLE DEPTH
Increases needle depth
Decreases needle depth
ADJUSTING
NEEDLE
DEPTH
To adjust needle depth,
hold the machine body and
PowerBolt while turning the
Grip. A counter clockwise
turn decreases depth, while a
clockwise turn increases depth
(also known as needle hang).
Each time you turn the grip
you can feel the tactile
feedback of the ratcheting
mechanism. Each “click”
displaces your needle 0.2mm
and allows you to set your
needle precisely without
involuntarily turning while
tattooing.
Turning the grip as shown
increases needle depth.
11
Turning the grip as shown
decreases needle depth.
USER MANUAL
ADDITIONAL INFORMATION
VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, this machine has been tested
to operate at a minimum voltage of 5 Volts and a maximum voltage of 12 Volts.
Depending on the type of needle configuration or brand you use, feel free to adjust the voltage to
obtain the desired performance.
ACCEPTED NEEDLES
Use only cartridge needles with an internal membrane. This will avoid accidental contamination
inside your machine. Fluids such as ink, water or oil will void warranty of the device and may require
replacement of internal parts.
MAINTENANCE
•
Flux S is sold pre-lubricated from the factory and does not need internal lubrication.
•
Prevent any type of external elements from entering inside the machine as they will disrupt the
motion of the component and contaminate lubrication.
•
The grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher
than 270° Fahrenheit or 132.222° Celsius. Add a hint of ointment or PTFE grease around internal
opening of grip or on stabilizing friction O-rings for optimal functionality after autoclaving. Refer
to page 5 for additional information.
•
Machine Body and PowerBolt can be sanitized from the outside with cold sterilization products.
•
Never spray the surface directly to prevent fluids from entering the machine. Always use pads or
disposable paper towels to apply sterilization products.
•
DO NOT DISASSEMBLE MACHINE.
WARRANTY
•
All the housing components (Grip, Machine Body and PowerBolt) are covered by a
lifetime warranty.
•
Internal parts are subject to wear and the motor itself will be covered by a 1 year warranty from
the date of purchase.
•
Motor warranty is void if motor shows signs of being dropped, of internal fluids entering the
motor, and/or IF motor shows signs of being tampered with in any way.
12
USER MANUAL
ADDITIONAL INFORMATION
HANDY TIPS
The following tips will help you get the most out of your Spektra Flux S and avoid potential issues:
•
Always secure your machine. Dropping the machine can cause damage to the magnets, bearings
and brushes of the motor.
•
Use only cartridges with membranes to avoid contamination.
•
Rinse your needle frequently to avoid pigment drying up and slowing down your cartridges. When
rinsing your needle, ensure to dip only the tip of the cartridge to avoid back flow of fluids.
•
Inspect your needles prior to use.
•
Avoid scratching the surface of the embodiments.
•
Use only FDA-approved cold sterilization solutions for disinfection.
•
Do not lubricate machine unless instructed otherwise.
•
Store your machine in a secure place.
•
Before first use, charge battery for a minimum of 3 hours.
TROUBLESHOOTING
1.- Machine manufacturer
Microbeau Int.: 1771 NW 79th Avenue, Doral, Florida 33126
2.- Servicing your machine
Just like any mechanical device subject to use, Microbeau strongly suggests that you service
your product at least once a year to ensure that a proper diagnosis of all working parts is
conducted. This ensures the optimal condition of all working parts including internal machine
clean up and fresh lubrication. Routine servicing will ensure that your machine remains
functioning like the very first day. Service is subject to fees.
3.- Warning
Disconnect machine from any power before making any adjustments.
For service inquiries, please contact [email protected].
For additional tips and tutorials, please visit Microbeau’s YouTube channel.
13
">
