Ceramic hob user`s manual
INSTALLATION INSTRUCTIONS
AND RECOMMENDATIONS FOR USE AND MAINTENANCE
1
CONTENTS
1. SAFETY INFORMATION………………………………………….… 3
2.SAFETY INSTRUCTIONS ……………………………………….…..3
3.PRODUCT DESCRIPTION ………………………………………..…5
4.DAILY USE …………………………………………………………….8
5.HELPFUL HINTS AND TIPS………………………………………..11
6.CARE AND CLEANING……………………………………………...12
7.TROUBLESHOOTING……………………………………………….14
8.INSTALLATION INSTRUCTIONS………………………………….15
9.TECHNICAL INFORMATION……………………………………….21
10.ENVIRONMENT CONCERNS………………………………………21
WE’RE THINKING OF YOU
Thank you for purchasing our appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you
can be safe in the knowledge that you’ll get great results every time.
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
2
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied
instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always keep the instructions with the
appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they are supervised by an adult or a person who is
responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when it operates or when it
cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend that you activate it.
• Cleaning and user maintenance shall not be made by children without
supervision.
1.2 General Safety
• The appliance and its accessible parts become hot during use. Do not touch
the heating elements.
• Do not operate the appliance by means of an external timer or separate
remote-control system.
• Unattended cooking on a hob with fat or oil can be dangerous and may result
in fire.
• Never try to extinguish a fire with water, but switch off the appliance and then
3
cover flame e.g. with a lid or a fire blanket.
• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids should not be placed on
the hob surface since they can get hot.
• If the glass ceramic surface is cracked, switch off the appliance to avoid the
possibility of electric shock.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Keep the minimum distance from the other appliances and units.
• Always be careful when you move the appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
• Protect the bottom of the appliance from steam and moisture.
• Do not install the appliance adjacent to a door or under a window. This
prevents hot cookware to fall from the appliance when the door or the window is
opened.
• If the appliance is installed above drawers make sure that the space, between
the bottom of the appliance and the upper drawer, is sufficient for air circulation.
• The bottom of the appliance can get hot. We recommend to install a
non-combustile separation panel under the appliance to prevent access to the
4
bottom.
2.2 Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections must be made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make sure that the appliance is
disconnected from the power supply.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure the mains cable or plug (if applicable) does not touch the hot
appliance or hot cookware, when you connect the appliance to the near
sockets
• Make sure the appliance is installed correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can make the terminal become too hot.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on cable.
• Make sure not to cause damage to the mains plug (if applicable) or to the
mains cable. Contact the Service or an electrician to change a damaged mains
cable.
• The electrical installation must have an isolation device which lets you
disconnect the appliance from the mains at all poles. The isolation device must
have a contact opening width of minimum 3mm.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leakage trips and contactors.
2.3 Use
WARNING!
5
Risk of injury, burns or electric shock.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Do not use an external timer or a separate remote-control system to operate
the appliance.
• Do not let the appliance stay unattended during operation.
• Do not operate the appliance with wet hands or when it has contact with water.
• Do not put cutlery or saucepan lids on the cooking zones. They become hot.
• Set the cooking zone to “off” after use.
• Do not use the appliance as a work surface or as a storage surface.
• If the surface of the appliance is cracked, disconnect immediately the
appliance from the power supply. This to prevent an electrical shock.
WARNING!
Risk of fire or explosion .
• Fats and oil when heated can release flammable vapours. Keep flames or
heated objects away from fats and oils when you cook with them.
• The vapours that very hot oil releases can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower
temperature than oil used for the first time.
• Do not put flammable products or items that are wet with flammable products
in, near or on the appliance.
• Do not try to extinguish a fire with water. Disconnect the appliance and cover
the flame with a lid or a fire blanket.
WARNING!
Risk of damage to the appliance.
• Do not keep hot cookware on the control panel.
• Do not let cookware to boil dry.
6
• Be careful not to let objects or cookware fall on the appliance. The surface can
be damaged.
• Do not activate the cooking zones with empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium or with a damaged bottom can cause
scratches on the glass ceramic. Always lift these objects up when you have to
move them on the cooking surface.
2.4 Care and Cleaning
WARNING!
Risk of damage to the appliance.
• Clean regularly the appliance to prevent the deterioration of the surface
material.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do
not use abrasive products, abrasive cleaning pads, solvents or metal objects.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
3. PRODUCT DESCRIPTION
7
1. Cooking zone
2. Cooking zone
3. Cooking zone
4. Cooking zone
5. Control panel
6. Cooking zone
7. Cooking zone
8. Cooking zone
9. Control zone
10. hot indication
11. Cooking zone
NOTE: Please refer to the practicality type and functions.
3.1 Control panel layout
8
Use the sensor fields to operate the appliance. The displays and indicators tell
which functions operate.
NO.
Sensor field
Function
1
Stop and Go ON/OFF button
2
Switching on the outer circle of a double zone
3
Indicator lamp (Selecting the timer)
4,12
Indicator lamp (Outer circle of a double zone
switched on)
5
Selecting the timer
6
Child Lock button
7
Indicator lamp (Selecting the child lock)
9
8
ON/OFF button
9
Indicator lamp (Selecting ON)
10
+/-
Plus/Minus button
11
To show the power setting.
13
Cooking zone indicator
3.2 Heat setting displays
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
Selecting Stop and Go function
A cooking zone is still hot (residual heat).
Timer diaplay
Selecting Auto heat-up function
Cooking zone ready for use
10
3.3 Residual heat indicator
WARNING!
The risk of burns from residual heat!
4. DAILY USE
4.1
Switching the hob on and off
Touch
for 1 second to activate the appliance,the indicator
on. Touch
comes
for 1 second to deactivate the appliance, the indicator
goes out.
If no further entry is made, the hob will switch itself off after 30s for safety
reasons.
4.2 Switching on a cooking zone and setting a power level

Touch
for 1 second,
will appear in each of the cooking zone
displays.
Touch the button
or
or
or
for selecting the cooking
zone you want, ‘ 0’ will flash in the cooking zone display

Whilst the ‘ 0’ is flashing, select a power level of between 1 and 9 by
touching the – or + button. If you touch and hold the – or + button for 3s,
the power level will be in a fast setting.
11

The power level selected flashes in the display for a few seconds and
then the cooking zone start to work.

Touch
or
or
or
for 3s, the selecting cooking zone
will be switched off. Or touch
to turn off the whole selecting
cooking zones.
4.3 Activation and deactivation of the outer rings
Activation of the outer rings


Touch the button
or
for selecting the cooling zone you want.
Select the power level you require.

While the power level is flashing, touch the button
outer ring. The indicator lamp
to activation the
comes on.
Deactivation of the outer rings

Touch the button

While the power level is flashing, touch the button
or
for selecting the cooling zone you want.
outer ring. The indicator lamp
goes off.
4.4 Auto heating-up
12
to deactivate the
When Auto heating-up has been activated, the cooking zone switches on
automatically at the highest power setting and then switches to the continued
cooking setting selected. The heating-up time depends on which continued
cooking setting has been chosen.

Touch the button
or
or
or
for selecting the cooking
zone you want. Select power setting 9 by touching the – or + button.

When the power setting 9 lights up constantly, touch + button again, the
LED panel will appear ‘

While ‘
’and‘9’.
’and‘9 is flashing alternately, touch the – or + button to choose
the continued cooking setting, e.g. 6.

The LED panel will flash ‘

Continued cooking setting 6 will go on after the auto heating-up time up.
Continued
’and‘6’ alternately for about 2.5mins.
Heating-up time (mins)
cooking setting
1
1
2
3
3
4.8
4
6.5
5
8.5
6
2.5
13

7
3.5
8
4.5
9
--
During
or
auto
or
heating-up,
or
zone or touch the button
you
can
touch
the
button
for 3s to deactivate the selecting cooking
to deactivate the appliance
4.5 Timer
Timer makes cooking much simpler. You do not have to wait beside the
hob; the selecting cooking zone will switch off automatically.
All the cooking zones can be programmed at the same time.

Select a power level for the cooking zone you require.

Touch the button

indicator lamp
will light up.
Then set the time by using the button ‘+’or‘-’ between 00 and 99. If you
, “00” will flash in the timer display and the
press and hold ‘+’or‘-’ for more than 3s, the time will increase or decrease
rapidly.

After 5s’ flashing, the time set will then count down in minutes. The time
remaining will be shown in the timer display.
14
If several cooking zones are switched on, touch the button
repeatedly until the indicator lamp flashes for the cooking zone you wish to
use this function.

At the end of the countdown time the cooking zone that was linked to the
countdown time will switch off automatically. And an audible signal will
sound for 2mins. You can touch any button to stop the buzzing.

To change the automatic switch-off time, touch the button
repeatedly until the indicator lamp you require flash. Touch the button
‘+’or‘-’ to set the time you want.

You can set the timer to ‘00’ to switch off the timer function. Or touch the
button
or
cooking zone.
or
or
for 3s to stop the selecting
4.6 Stop+Go function
Stop and Go function is set for an emergency thing happening.

If you have some other things to do while cooking, just touch the
button
. All the selecting cooking zones will turn to level 1 and the
LED display will show
.
15

Touch the button
again within 10mins, the all the selecting
cooking zones will work as the continued cooking setting. If not, the hob
will switch off automatically.
4.7 Children lock
Touch the button
,The indicator lamp
is not effective. Touch and hold again
lamp
comes on. Operating any keys
3 seconds to unlock. The indicator
goes out, the other touching keys return using situation.
4.8 Safety cut-off
If one or more of the cooking zones are accidentally left on, a safety cut off will
activate after a certain period of time. The length of time depends on the power
level that a zone or zones have been set on.
LEVEL
TIME LIMIT
1-3
8 hours
4-6
4 hours
7-9
2 hours
4.9 Key sound
16
Touch ‘+’and‘-’ at the same time to keep the key sound or not.
5. HELPFUL HINTS AND TIPS
5.1 Cookware
Information about the cookware
• The bottom of the cookware must be as thick and flat as possible.
• Cookware made of enamelled steel and with aluminium or copper bottoms can
cause the colour change on the glass ceramic surface.
5.2 Energy saving
How to save energy
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
• Stop the cooking zones before the end of the cooking time to use residual
heat.
• The bottom of pans and cooking zones must have the same dimension.
5.3 The Examples of cooking applications
The data in the table is for guidance only.
17
Heat
Use to:
Time
Hints
Keep warm the food you
as
Put a lid on a
cooked
required
cookware
Hollandaise sauce, melt:
5-25min
Mix from time to time
10-40min
Cook with a lid on
25-50min
Add the minimum
setting
1
1-2
butter, chocolate, gelatine
1-2
Solidify: fluffy omelettes,
baked egg
2-3
Simmer rice and milkbased
dishes, heating up
twice as much liquid as
ready-cooked meals
rice, mix milk dishes
part procedure through
3-4
Steam vegetables, fish,
20-45min
meat
4-5
Steam potatoes
Add some tablespoons
of
20-60min
liquid
Use max. ¼ l water for
750g of potatoes
4-5
Cook larger quantities of
60-150min
food, stews and soups
6-7
Gentle fry: escalope, veal
cordonbleu, cutlets,
Up to 3 l liquid plus
ingredients
As
necessary
Turn halfway through
5-15min
Turn halfway through
rissoles, sausages, liver,
roux, eggs, pancakes,
doughnuts
7-8
Heavy fry, hash browns,
loin steaks, steaks
18
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot
roast),deep-fry chips
Information on acrylamides
Important!
According to the newest scientific knowledge, if you brown food (specially the
one which contains starch), acrylamides can pose a health risk. Thus, we
recommend that you cook at the lowest temperatures and do not brown food
too much.
6. CARE AND CLEANING
Figure 1
Figure 2
19
Figure 3
Figure 4
Figure 5
After each use of the glass-ceramic hob, wait for it to cool down and clean it;
otherwise, even the smallest food residue will be burnt onto the hot surface next
time you use the appliance.
For regular cleaning and maintenance of the glass-ceramic surface, use special
conditioning agents which form a protective layer on the surface, shielding it
from dirt. Before each use, wipe any dust or other particles from the hob surface
and pan bottom as these could scratch the surface (Figure 1).
Careful: steel wool, abrasive sponges, and abrasive detergents can scratch the
hob surface. Glass ceramic surface can also be damaged by aggressive sprays
20
and inappropriate or
insufficiently. shaken (mixed) liquid cleaning agents (Figure 1 and Figure 2).
Signs and indications on the hob may be worn if aggressive cleaning aids are
used on cooking zone edges, or if pans with damaged bottom or used.
Light stains can be removed by a damp soft cloth; then, wipe the surface dry
(Figure 3).
Water stains can be removed using a mild solution of vinegar; however, do not
use this solution to clean the frame (only with some models, as it may become
dull. Do not use aggressive sprays or decalcification agents (Figure 3).
Heavier stains can be removed using special agents and utensils for cleaning
the glass-ceramic hobs. When using these products, follow the instructions
provided by their respective manufacturers.
Make sure any residues of cleaning agents are thoroughly removed, as they
could damage the glass-ceramic hob when the cooking zones heat up (Figure
3).
Stubborn and burnt residues can be removed using a scraper. make sure the
plastic part of the scraper does not come into contact with a hot cooking zone.
Be careful not to cut yourself
with the scraper!
Sugar and sugar-laden food may permanently damage the glass-ceramic
surface (Figure 5); therefore, they should be removed from the glass-ceramic
surface as soon as possible, although the cooking zone may still be hot (Figure
4). Any change in the color of the glass-ceramic surface does not affect its
operation or the stability of the surface. Such discolorations are mostly a result
of burnt food residues or use of cookware made of materials such as aluminum
or copper; these stains are difficult to remove.
Warning: All damage described above predominantly relates to the aesthetics,
i.e. appearance of the appliance and do not affect its functionality directly. Such
errors cannot be the subject of a warranty claim.
21
7. TROUBLESHOOTING
Problem
Possible cause
The appliance is not
Remedy
connected to an electrical
Check if the appliance is
correctly connected to
supply or it is connected
the electrical supply
incorrectly.
(refer to connection
You cannot
diagram).
activate the
Activate the appliance
appliance or
again and set the heat
operate it.
setting in less than 30
seconds.
You touched 2 or more sensor
Touch only one sensor
fields at the same time.
field.
There is water or fat stains on
Clean the control panel.
the control panel.
The appliance
You put something on the
deactivates.
Remove the object from
the sensor field.
sensor field
The residual heat
The cooking zone is not hot
If the cooking zone
indicator does not
because it operated only for a
operated sufficiently
come on.
short time.
long to be hot, speak to
the service centre.
You cannot
Activate the inner ring
activate the outer
first.
ring.
The sensor fields
The cookware is too large or
become hot
you put it too near to the
22
Put large cookware on
the rear cooking zones if
Cooking zones
controls.
necessary.
Technical fault.
Switch the power to the
can not be turned
cooktop off at the wall
off.
and call your Authorised
Repairer or Customer
Care.
If you tried the above solutions and can not repair the problem, speak to your
dealer or the customer service. Give the data from the rating plate, three digit
letter code for the glass ceramic (it is in the corner of the glass surface) and an
error message that comes on.
Make sure, you operated the appliance correctly. If not the servicing by a
customer service technician or dealer will not be free of charge, also during the
warranty period. The instructions about the customer service and conditions of
guarantee are in the guarantee booklet.
8. INSTALLATION INSTRUCTIONS
WARNING!
Refer to "Safety information" chapter.
Before the installation
• Installation of the appliance into a kitchen worktop and its connection to the
power mains may only be performed by an adequately qualified technician.
• Veneer or other finish of the piece of kitchen furniture into which the hob is to
be built in should be treated with heat resistant glue (100°C); otherwise, the
worktop finish may be discolored or deformed.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen
furniture, with a width of 600 mm or more.
23
• After installation, the front two fastening elements should be freely accessible
from below.
• Hanging, or wall-mounted kitchen elements should be installed high enough
not to interfere with the work process.
• The distance between the cooking hob and the kitchen hood should be no less
than indicated in the instructions for kitchen hood installation. The minimum
distance is 650 mm.
• The distance between the appliance edge and the adjacent tall kitchen
furniture element should amount to no less than 40 mm.
• Use of massive wood decoration plates or boards on the worktops behind the
cooking hob is
permitted, if the minimum distance remains the same as indicated in the
installation rawings.
• Minimum distance between the built-in cooking hob and the rear wall is
indicated on the installation drawing.
Before inserting the appliance into the opening in the kitchen worktop, the
supplied foam gasket must be attached to the lower side of the glass ceramic
(glass) cooking hob (see figure above). Do not install the appliance without the
foam gasket!
8.1 The gasket should be attached to the appliance in the
following way:
- Remove the protective fi lm from the gasket.
- Then, attach the gasket to the lower side of the glass, approximately 2-3
millimetres from the edge (as shown in the figure). The gasket must be attached
along the entire length of the glass edge and should not overlap at the corners.
When installing the gasket, make sure that the glass does not come into contact
with any sharp objects.
NOTE!
24
On some appliances the gasket is already installed!
• Cooking hobs can be installed into worktops that are 30 to 50mm thick.
• The kitchen furniture element underneath the hob should not be fi tted with a
drawer. If the kitchen furniture element as a horizontal partition wall, it should
be installed no less than 60
millimeters from the lower surface of the worktop. The space between the
partition wall and the hob must be empty; no objects should be placed into that
gap.
• On the furniture back wall there should be a cutout with width of at least 175
mm along the entire width of the furniture element.
25
26
8.2 Fastening the cooktop to the bench
1. Turn the cooktop upside down and place it on a soft surface.
2. Spread the seal around the edges of the ceramic glass with the adhesive side
facing down,
making sure that the whole perimeter is sealed. Cut off any excess material.
3. Mount the supplied clamps and screws onto the cooktop, as shown (without
tightening the screws).
4. Place the cooktop into the cutout, then tighten the screws to clamp the
cooktop securely to the bench.
5. Using a sharp cutter or trimmer knife, trim the excess sealing material around
the edge of the cooktop. Take care not to damage the benchtop.
Note: if your bench is thicker than 40 mm, recess the underside to between 30
and 40 mm.
27
Position of the fixing brackets: 600mm full touch control series
Position of the fixing brackets: 600mm Mechanical series
28
Position of the fixing brackets: 300mm series
8.3 Connecting the cooktop to the mains power supply
29
Important!
•This cooktop must be connected to the mains power supply only by a suitably
qualified person.
•This cooktop must be earthed.
•Before connecting the cooktop to the mains power supply, check that:
1.the domestic wiring system is suitable for the power drawn by the cooktop
2.the voltage corresponds to the value given on the rating plate
3.the power supply cable sections can withstand the load specified on the
rating plate.
•To connect the cooktop to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire.
•The power supply cable must not touch any hot parts and must be positioned
so that its
o
temperature will not exceed 75 C at any point.
• The power of the main supply cable must be bigger than the rated power.
terminal block
30
Connecting the terminal block, for example the electrical source is AC220-240V
5 core power cord 1.5mm
2
3 core power cord 4 mm
31
2
Connecting the terminal block includes the single-phase power, two-phase
power and the three-phase power as follows:
32
Connecting the air switch of the electrical source as follows:
33
9. TECHNICAL INFORMATION
Product specifications
Electric parameter
VE 4
AC220-240V
50HZ
6000W
VI TRO 2P
AC220-240V
50HZ
3000W
VE 2 MC-HD301
AC220-240V
50HZ
3000W
VE 2 MC-HD303
AC220-240V
50HZ
3000W
34
10. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable containers to recycle it. Help protect the
environment and human health and to recycle waste of electrical and
electronic appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return
the product to your local recycling facility or contact your municipal office.
35
36
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement