DPH-400SE - D-Link
DPH-400S Series IP Phone Specifications
External Engineering Spec
For
DPH-400S Series IP Phones
Model Name:
D-link DPH-400S / 400SE / 400SEDM
Version: 1.0
2007/08/04
By: Olivia Lo / D-Link / Product Planning
This document contains Confidential & Proprietary information and is the property of D-Link Corporation. The
contents of this document may not be disclosed to unauthorized persons without the written consent of D-Link
Corporation.
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 1 of 10
DPH-400S Series IP Phone Specifications
DPH-400S Series IP Phone : Revision History
Person
Version Revised Date
Name
1.0
2007/08/04
Olivia Lo
Content Revised
Initial Release
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 2 of 10
DPH-400S Series IP Phone Specifications
1.0 Product Introduction
DPH-400S series IP Phones are mainly designed for general office users
(from VSE, SOHO to SMB) in VoIP communication. With sophisticated and
elegant design, this platform has high performance and can offer versatile
features and specifications to meet different environment requirements. It can be
installed on LAN /DSL/Cable network environment and registered to SIP registrar
Servers(), soft switch(es), IP-PBX(s), or IMS-based system and let SIP-enabled
terminals to communicate with. Beyond this, user’s PC can be connected to this
phone instead of LAN directly.
The phone comes with a plastic Housing and some accessories, including
handset, handset cord, keypad, keys and wall-mounting kit. A graphic LCD
display on the panel provides direct visual interface with user. User can use
keypad/LCD or Web browser to configure this phone.
2.0 Appearance and User Interface Layout
2.1 Key and LED layout
Keys: Dial pad 12 keys
Volume 2 keys
Line keys : 4
Fixed functional keys : 11 keys
Soft keys: 4
Navigator keys: 5
EDM keys: 24
LEDs: Speaker x 1
Mute x 1
Headset x 1
Line Keys (1,2,3,4) x 4
MWI x 1
LAN port LED x 1
PC port LED x 1
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 3 of 10
DPH-400S Series IP Phone Specifications
2.2 The Layout of I/O Ports
Reset button: to return to system default setting
LAN Port: to connect to 10/100Mbps Ethernet (toward Internet)
PC Port: to connect to 10/100Mbps Ethernet (toward a local PC )
5V DC IN Jack : to connect to local power with a switching power adaptor.
PA/PoE switch : to switch to a proper power source
Engineering Service Port: NOT used by end user(for Vendor only)
EDM Port: to connect to an external DPH-400SEDM module (option)
Handset Hook switch: for hang on/off control on handset cradle
Handset Jack: to connect with a handset
Headset Jack: to connect with RJ-9 4-pin headset
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 4 of 10
DPH-400S Series IP Phone Specifications
3.0 Hardware & Physical Specifications
Hardware:
Model
DPH-400S
DPH-400SE
DPH-400SEDM
Key Components
CPU
DSP
SDRAM
Flash
Port Name
LAN
Description
Standard SIP phone with Power Adaptor
support only
With both Power Adaptor and PoE support
Complaint to the standard:
IEEE802.3af PoE function
Optional Extended Dial Module for speed dial,
abbreviated code, programmable features
assignment use.
Description
Broadcom BCM1113
ZSP processor inside BCM1113
16MB
4MB
Functions
1 x 10/100 BaseT ports RJ45
Compliant to following standards:
IEEE 802.3/802.3u
Support Full-Duplex operations
IEEE802.3af PoE function (option)
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 5 of 10
DPH-400S Series IP Phone Specifications
1 x 10/100 BaseT ports
Compliant to following standards:
IEEE 802.3
Support Full-Duplex operations
PC
Physical :
Model
Dimension
Net Weight
Power Adaptor
Power Consumption
Temperature
Related Humidity
Physical Data
DPH-400S & DPH-400SE:
211mm x 145mm x 195mm
DPH-400SEDM:
50 mm x 162mm x 56mm
DPH-400S Net Weight: 1.00 Kg
DPH-400SE Net Weight: 1.05 Kg
DPH-400SEDM Net Weight: 120g
AC-DC Switching Power switching
Wall-Mount type
Input: 100V~ 240VAC
Output: 5V / 2000mA
Max. Watt: 10Watt.
Typical: 3.36 Watt (without DPH-400SEDM)
Max.: 4.62 Watt with DPH-400SEDM
Operating: 5℃ to 40℃
Storage: 5% to 95% -20℃ to 65℃
Operating: 10% to 90 % (no-condensing)
Storage: 5% to 95% (non-condensing)
4.0 Software Specifications
Software Components:
Part Item Name
Operating System
SIP Stack
Software Platform
Software Requirement
Browser for Web of Phone
Auto Provisioning Server
Software Specifications:
Main Parts
„
…
…
Description
WindRiver VxWorks
RadVision SIP stack
Broadcom BSP
Description
Microsoft Windows IE, or
PC-based general web browser
General compatible TFTP or FTP Server
Software
Specification Details
Keypad Features
Volume Control for Ringer, Handset and Speaker
2 Dial(CCITT) Keypad
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 6 of 10
DPH-400S Series IP Phone Specifications
…
…
…
…
…
…
…
…
…
…
…
…
…
„
…
…
…
…
…
…
…
…
…
„
…
…
…
…
…
„
…
…
…
…
…
…
…
„
…
…
…
…
…
…
Speakerphone
Mute
Headset
Redial
Hold
Call Transfer
Call Conference
Message Retrieval (MWI)
Phonebook
Soft keys
Navigator Keys
Multiple Like Keys
EDM extend module for speed dial abbreviated code, programmable
features.
Phone Features
Caller ID display (Incoming call & CWI)
Call log: 30 Missed Calls, 30 Answered Calls, 30 Dialed Calls
Phone book (up to 100 contact names and phone number)
Day/Time display
Call timer display
10 Selective Ring tones
10 Speed dial number
Incoming call Indicator
User / Admin Password control for Configuration
Voice Codec
G.711a/u (64k bps)
G.726
G.729A/B(8 k bps)
G.723.1
BroadVoice16/32
(*Optional)
(*Optional)
(*Optional)
Advance Voice Quality Feature
Silence Suppression
Acoustic Echo Cancellation (G.167)
Voice Activation Detection(VAD)
Comfort Noise Generation
Dynamic Jitter Buffer
DTMF Transmitter(SIP info, Transparent, RTC 2833 relay)
Packet Lost Concealment (PLC)
Signal, Media & Network Protocols
SIP RFC 3261
SDP RFC 3266
RTP/RTCP
IP address: DHCP, Static IP and PPPoE
STUN (for NAT traversal)
SNTP
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 7 of 10
DPH-400S Series IP Phone Specifications
…
DNS
„
Supplementary Call Feature
Call Hold
Call Transfer (Blind and Attend Transfer)
Call Forward (Busy, No answer, Unconditional)
Call Waiting
Call Waiting Indication
Three Way Conferences
Message Waiting Indication
Do Not Disturb
Auto Answer
…
…
…
…
…
…
…
…
…
„
…
…
…
…
„
…
…
…
…
…
…
Network Capability
QoS: IEEE 802.1Q & IEEE 802.1p Compliant
DiffServ (DSCP)
Full range VLAN ID Support,
Class of Service Support by VLAN Tag
User Interface and Network Management
LCD/Keypad UI in English version
HTTP(WEB) UI in English version
SNMP V2
FTP/TFTP(Trivial File Transfer Protocol) for Firmware remote update
APS auto-provisioning for firmware and profile upgrade
Emergency upgrade if firmware corrupted
5.0 Audio Platform Specifications
To be compliant to the Audio standard: TIA/EIA -810-A.
„
Send Frequency Response:
The send frequency response shall be below the upper limit and above the
lower limit is shown in Figure below.
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 8 of 10
DPH-400S Series IP Phone Specifications
„
Receive Frequency Response
The receive frequency response shall be below the upper limit and
above the lower limit is shown in Figure below.
„
Send Loudness Rating (SLR): 8 dB±4.0 dB.
„
„
„
„
Receive Loudness Rating (RLR): 2 dB ±4.0 dB.
Talker Side-tone masking rating (STMR): 18 dB ± 6 dB
Send Noise: less than -68 dB.
Send Single Frequency Interference: less than -78 dB.
„
Receive Noise: less than 38 dB.
„
Receive Single Frequency Interference:
10 dB quieter than the A-weighted broadband noise floor.
6.0 Certifications/Test Reports Requirement
EMC/RF Certificates and Test Reports
EMC Test Report
CE Report (EN55022/55024)
FCC Report (FCC CFR 47, Part 15B/
ICES-003)
RoHS
WEEE
Safety Certificates and Test Reports
Certifications
Class Class
A
B
V
V
Remarks
Standards
Remarks
7.0 Package Contents & Weighting
Model
DPH-400S
Content Description
1 x IP phone main set
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 9 of 10
DPH-400S Series IP Phone Specifications
1 x Handset Cord
1 x Handset
1 x Quick Install Guide (paper printed)
1 x CD-ROM
1 x 1.5m Ethernet CAT5 Cable
1 x Wall-mount kit pack (Screws)
1 x Switching power adaptor (optional for different
country/area)
1 x Gift box
DPH-400SE
DPH-400SEDM
Unit Packing Weight: 1.65Kg
Size of Gift box: 367mm x 117mm x 228mm
The number of unit per carton: 6pcs
Carton Packing Weight: 10.9Kg
Size of Carton : 51 x 38 x 30 cm3
1 x IP phone main set
1 x Handset Cord
1 x Handset
1 x Quick Install Guide (paper printed)
1 x CD-ROM
1 x 1.5m Ethernet CAT5 Cable
1 x Wall-mount kit pack (Screws)
1 x Switching power adaptor (optional for different
country/area)
1 x Gift box
Unit Packing Weight: 1.70Kg
Size of Gift box: 367mm x 117mm x 228mm
The number of unit per carton: 6pcs
Carton Packing Weight: 11.2Kg
Size of Carton : 51 x 38 x 30 cm3
1 x EDM set
1 x Screw pack (for fastening to phone)
1 x Gift box
Unit Packing Weight: 200g
Size of Gift box: 170 mm x 65 mm x 44 mm
The number of unit per carton: 50 pcs
Carton Packing Weight: 11.0Kg
Size of Carton :
=========The End of Document =============================
D-Link Confidential & Proprietary, Copyright 2007, All Rights reserved.
Doc: TPKFS-SIP2008-DL-A
Page 10 of 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement