HD 720P 7inch wireless lcd dvr Manual 20140902

HD 720P 7inch wireless lcd dvr Manual 20140902
DIGITAL WIRELESS LCD DVR SYSTEM
( NETWORK VERSION )
USER’S MANUAL
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING EQUIPMENT.
RETAIN IT FOR FUTURE REFERENCE.
CONTENTS
CAUTION
WARNING
………………………………………………………..…
2
…………………………………………………………
3
2.2 Panel Button Function …………………………………………………………
3
…………………………………………………………
4
1
WHAT IS INCLUDED
2
PRODUCTS
2.1 LCD DVR
2.3 Camera
3
4
SPECIFICATIONS
3.1 LCD DVR
………………………………………………………………
4~5
3.2 Outdoor Camera
………………………………………………………………
5
3.3 Indoor Camera
………………………………………………………………
6
INSTALLATION
…………………………………………………………
4.1 Install the LCD DVR
4.2 Install the Camera
5
6
………………………………………………………………
7
MENU AND BUTTON OPERATION
5.1 Camera setting
………………………………………………………………
7~9
5.2 REC setting
………………………………………………………………
9~12
5.3 System setting
………………………………………………………………
12~14
5.4 System Info
………………………………………………………………
15~16
5.5 Playback
………………………………………………………………
17
USAGE OF SOFTWARE IN APPLE CLIENT
……………………………………………….……
6.1 Install client-end software
17
6.2 Add network DVR methods ………………………………………………….…
18~19
6.3 User operation
………………………………………………………………
19~21
6.4 System settings
………………………………………………………………
21~22
6.5 Delete network DVR methods
7
6
………………………………………….…..…
22
USAGE OF SOFTWARE IN ANDROID CLIENT
7.1 Install client-end software
……………...………………………………………
7.2 Add network DVR methods ………………...……………………………………
…………………………………….…………………………
8
STATEMENT
9
TROUBLE SHOOTING
…………………………..……………………………...
23
23~24
25
25~26
CAUTION
* Please read the following manual details before using.
* Pay attention to dampproof for the high resolution unit.
* Don't scratch the LCD screen surface and clean the surface by soft cloth if the screen was dirty.
* This unit should be opened and serviced only by a qualified technician.
* Push the unit MIR switch if finding the picture reverse.
* Install the bottom side of the outer shell or inner side chamfer by customer's self-selection in
accordance with bedframe.
The lighting flash with arrowhead symbol within an equilateral triangle
Is intended to alert the user to the presence of uninsulated.
“dangerous voltage” within the products enclosure that may be of
sufficient magnitude to constitute risk of electric shock to person.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING
To prevent injury, this equipment must be securely attached to the floor /wall in accordance with the
installation instructions.
1
1. WHAT IS INCLUDED?
ITEM
QUANTITY
LCD DVR with antenna
1 unit
Camera with antenna
2 unit
CD ( software / manual )
1 unit
Power Adapter (DVR)
1 unit
Power Adapter (Camera)
2 unit
RJ45 cable
1 unit
AV cable
1 unit
Camera bracket
2 unit
Mounting hardware
3 unit
DVR
Camera
CD
Power Adapter (DVR)
Power Adapter (Camera)
RJ45 cable
AV Cable
Camera bracket
Mounting hardware
Note: The above packing list is basing on the package of 1 LCD DVR with 2 cameras. the packing list will
be changed according to the quantity of cameras.
Photos are only for reference and subject to the real product in the box.
2
2. PRODUCTS
2.1 LCD DVR appearance
2.2 Panel Button Function
AV
:
Switch to turn on/off the screen display
TALK
:
Turn on/off the 2-way audio intercom (only for 2-way audio model)
▲
:
Move to previous column or Adjust the digital
▼
:
Move to next column or Adjust the digital
ENTER
:
Confirm the settings
◄
:
Move to left column or Switch to previous option
►
:
Move to right column or Switch to next option
3
REC
:
Start / Stop manual recording
MENU
:
Enter the main menu or Exit the menu operation
2.3 Camera appearance
A. Housing for camera without speaker
B. Housing for camera with speaker
C. Indoor Camera
3. SPECIFICATIONS
3.1 LCD DVR
ITEMS
Display Screen
Resolution
DESCRIPTION
7inch TFT LCD (16:9) LED back-light
800(H)×RGB×480(V)
4
Display Area
154.08mm(H)×85.92mm(V)
White Luminance
250cd/㎡
Frequency Range
2.4G FHSS
Cameras Supported
4 channels
Transmission distance
Frame Rate
Compression
File Type
Record Mode
200~300 meters Line of sight
2-CH: [email protected] HD
2-CH: [email protected] 640×480 VGA
MPEG-4
ASF
4-CH record separately
Start recording mode
Manual / Motion detect / Schedule
Scheduled Recording
1 Week
Automatic Overwrite
Optional
Maximum SD Card Size
Network communication mode
Network Interface
Monitoring methods
Video playback
Power Supply
Power consumption
Operating Temperature
Operating Humidity
Storage temperature
Dimensions
CLASS 10 128GB
P2P
RJ45 10M/ 100M Ethernet Auto Detect
Special software: iOS, Android customers end
Smart phone video playback
100-240V~50/60Hz
5V/1000mA
5W max.
0℃~+40℃
65%
-10℃~+50℃
200(W)×140(H)×30mm(D)
3.2 Outdoor Camera
ITEMS
Image Sensor
Active pixels
Horizontal Resolution
Min illumination
Lens
Night Vision
IR LED control
Quantity of IR LED
Night vision range
Frequency Range
Transmission distance
User ID
DESCRIPTION
1/4 inch color CMOS Sensor
1280(H)×720(V)
1.0 Megapixel
0.1Lux/F=1.2 (0Lux LED On)
6mm fixed lens ( 3.6mm optional)
Yes
Automatic (CDS Sensor)
24 pcs
12-15 Meters
2.4G FHSS
200~300 meters Line of sight
Random ID
Outdoor use
Yes
Waterproof
IP55
Operating Temperature
Operating Humidity
Storage temperature
Power Supply
Power consumption
-10℃~+40℃
85%
-20℃~+50℃
100-240V~50/60Hz 12V/500mA
5W max.
5
Dimensions
110(W)×150(H)×105mm(D)(With Stand)
3.3 Indoor Camera
ITEMS
Image Sensor
Active pixels
Horizontal Resolution
Min illumination
Lens
Night Vision
IR LED control
Quantity of IR LED
Night vision range
Frequency Range
Transmission distance
User ID
Usage Environment
Operating Temperature
Operating Humidity
Storage temperature
Power Supply
Power consumption
Dimensions
DESCRIPTION
1/4 inch color CMOS Sensor
1280(H)×720(V)
1.0 Megapixel
0.1Lux/F=1.2 (0Lux LED On)
3.6mm fixed lens (6mm lens is optional)
Yes
Automatic (CDS Sensor)
12 pcs
6-8 Meters
2.4G FHSS
200~300 meters Line of sight
Random ID
Indoor
0℃~+40℃
65%
-10℃~+50℃
100-240V~50/60Hz 12V/500mA
5W max.
64(L)×130(H)×80(D)mm (with stand / no antenna )
4. INSTALLATION
4.1 Install the LCD DVR
Lock the LCD DVR on the bracket and install the antenna to the LCD DVR, connect the RJ45
network cable between LCD DVR and Router, then plug and turn on the power adapters of LCD
DVR and Router.
Before using the LCD DVR, please confirm the Router is open DHCP service (Generally
speaking, the router is open DHCP service automatically).
Note: This product is no PPPOE dial function, and can not connect with the Modem.
6
4.2 Install the Camera
Please pair the camera with the LCD DVR firstly, then install the cameras on the wall or other
safe places, finally plug and turn on the power adapter of cameras.
Note: The camera position must be within the valid transfer distance to ensure the LCD DVR
can receive the stable and clear image from the cameras. Please pay attention to your safety in
the outside installation.
5. MENU OPERATION
5.1 Camera Setting
5.1.1 Pairing
5.1.1.1 Plug and turn on the power adapters of LCD DVR and cameras.
5.1.1.2 Press "Menu" to enter the main menu, and press "◄ ►" to select "Camera setting", then
press "Enter" to enter next step. Press "▲ ▼" to select "Pairing" column.
5.1.1.3 At the “Pairing” screen, press the "Enter" to enter next step, and press "▲ ▼" to select
"Cam 1-2-3-4", and press "Enter" to confirm, then press “Pairing” button at the back of
camera within 30 seconds to finish pairing.
7
5.1.1.4 If no video displayed on the screen, it means the pairing is not successful, please repeat the
above operation again.
5.1.1.5 LCD DVR can support up to 4 cameras.
5.1.2 Camera On/Off
At the "Camera setting" screen, press "▲ ▼" to select "Camera ON/OFF", and press
"Enter" to enter next step. Press "▲▼" to select "Cam 1-2-3-4", and press "◄ ►" to select
"ON/OFF", then press "Enter" to confirm and press "Menu" to exit.
Remarks: Dual screen display if only set 2 cameras as “ON”.
5.1.3 Resolution
At the "Camera setting" screen, press "▲ ▼" to select "Resolution" and press "Enter" to
enter next step. Press "▲ ▼" to select "Cam 1-2-3-4", and press "◄ ►" to select
"VGA/HD" , then press "Enter" to confirm and press "Menu" to exit.
Remarks: maximum support 2 channel in HD resolution.
5.1.4 Brightness
At the "Camera setting" screen, press"▲ ▼" to select "Brightness" and press "Enter" to
8
enter next step. Press "▲ ▼" to select "Cam 1-2-3-4", and press "◄ ►" to select "1-6" ,
then press "Enter" to confirm and press "Menu" to exit.
5.1.5 Anti-flicker
At the "Camera setting" screen, press "▲ ▼" to select "Anti-flicker" and press "Enter" to
enter next step. Press "▲ ▼" to select "60Hz/50Hz", then press "Enter" to confirm and
press "Menu" to exit.
5.2 REC Setting
5.2.1 REC Mode
Press "Menu" to enter the main menu, and press "◄ ►" to select "REC Setting", then
press "Enter" to enter next step. Press "▲ ▼" to select "REC Mode" column.
At the "Rec mode" screen, press "▲▼" to select "Cam 1-2-3-4", and press "◄ ►" to select
"Motion/Manual/Schedule", then press "Enter" to confirm and press "Menu" to exit.
9
5.2.2 Scheduled Setting
5.2.2.1 At the "Recording" screen, press "▲▼" to select "Scheduled Setting", press "Enter" to
enter next step. Press "Enter" to select "Modify" to enter next step.
5.2.2.2
At the "Scheduled Recording" screen, press "◄ ►" to select "Cam 1-2-3-4", then press "
◄ ► " to select the time at "00~24", then press" ◄ ► " to select the date at
"Mon/Tue/Web/Thu/Fri/Sat/Sun". Press"◄ ►" to select "Set", and press "Enter" to
confirm.
Remarks: date/hours in yellow means the settings are finished, and press "Menu" to exit.
5.2.2.3 Delete the scheduled setting, please do the same operations as above to select the date, time
and channel, then press"◄ ►" to select "Delete", then press "Enter" to confirm and press
"Menu" to exit.
10
5.2.3 Motion Detection
At the "Recording" screen, press "▲▼" to select "Motion Detection", press "Enter" to
enter next step, and press "Enter" at the Motion Detection screen to enter next step. Press
"▲ ▼" to select "Cam 1-2-3-4", and press "◄ ►" to select "Low/Mid/High" , then press
"Enter" to confirm and press "Menu" to exit.
5.2.4 Section
At the “Recording” screen, press “▲▼” to select “Section”, press “Enter” to enter next
step. Press “▲ ▼” to select “5 min / 10 min / 15 min”, then press “Enter” to confirm and
11
press “Menu” to exit.
Remarks: this operation is to set the recording time of each video file.
5.2.5 File Overwrite
At the “Recording” screen, press “▲▼” to select “File Overwrite”, press “Enter” to enter
next step. Press “▲ ▼” to select “YES / NO”, then press “Enter” to confirm and press
“Menu” to exit.
5.3 System Setting
5.3.1 Date & Time
Press the “Menu” to enter the main menu, and press “◄ ►” to select “System Setting”,
then press “Enter” to enter next step. Press “▲ ▼” to select “Date & Time” column and
press “Enter” to enter.
At the “Date & Time” screen, press “◄ ►” to select “DATE” and “TIME”, then press “▲
▼” to select digital “0 – 9 “,”DATE” and “TIME”, then press “Enter” to confirm and press
“Menu” to exit.
12
5.3.2 Video Out
At the “Setting” screen, press “▲ ▼” to select “Video Out”, and press “Enter” to enter
next step. Press “▲ ▼” to select “NTSC / PAL/Panel “, then press “Enter” to confirm and
press “Menu” to exit.
5.3.3 Format
At the “Setting” screen, press “▲ ▼” to select “Format”, and press “Enter” to enter next
step. Press “▲ ▼” to select “YES / NO “, then press “Enter” to confirm and press
“Menu” to exit.
Remarks: this operation is to format the SD card.
5.3.4 Default Setting
At the “Setting” screen, press “▲ ▼” to select “Default Setting”, and press “Enter” to
enter next step. Press “▲ ▼” to select “YES / NO “, then press “Enter” to confirm and
press “Menu” to exit.
13
5.3.5 Alarm
At the “Setting” screen, press “▲ ▼” to select “Alarm”, and press “Enter” to enter next
step. Press “▲ ▼” to select “ON / OFF “, then press “Enter” to confirm and press
“Menu” to exit.
5.3.6 Update
At the “Setting” screen, press “▲ ▼” to select “Update”, and press “Enter” to enter next
step. Press “▲ ▼” to select “YES / NO “, then press “Enter” to confirm and press
“Menu” to exit.
5.3.7 Language
At the “Setting” screen, press “▲ ▼” to select “Language”, and press “Enter” to enter
next step. Press “▲ ▼” to select “English / Deutsch / Italiano”, then press “Enter” to
confirm and press “Menu” to exit.
14
5.3.8 Network
5.3.8.1 At the “Setting” screen, press “▲ ▼” to select “Network”, and press “Enter” to enter next
step. Press “◄ ►” to select “Dynamic IP”, then press “Enter” to confirm and press
“Menu” to exit.
5.3.8.2 At the “Network” screen, press “◄ ►” to select “Static IP” and press “▲ ▼” to select
“Address /Mask/Gateway” and press “Enter” to confirm. Press “◄ ►” to adjust the digital
of “ 0 – 9”, then press “Enter” to confirm and press “Menu” to exit.
5.4
System Info
5.4.1 Card Info
Press “Menu” to enter the main menu, and press “◄ ►” to select “System Info”, then press
“Enter” to enter next step. Press “▲ ▼” to select “Card Info” at System Info screen and
press “Menu” to exit.
15
Remarks: this operation is to check the SD card total capacity and the percent of the used and
the rest capacity,
5.4.2 Version
At the “System Info” screen, press "▲ ▼" to select " Version " and press "Enter" to check
the machine software version, then press "Menu" to exit.
5.4.3 Network Info
At the “System Info” screen, press "▲ ▼" to select "Network Info " and press "Enter" to
check the machine IP address and P2P UID No#, then press "Menu" to exit.
16
5.5
Playback
Press "Menu" to enter the main menu, and press "◄ ►" to select "Playback", then press
"Enter" to enter next step.
At the “Folder Name” screen, press "▲ ▼" to select the file (e.g: "00000040") and
press "Enter" to enter next step. Press "▲ ▼" to select camera channel/date/time concrete
file (e.g. 153147-3 / 2014/02019 / 15:31:46), then press "Enter" to play or press "Menu" to
exit.
6. USAGE OF SOFTWARE IN APPLE CLIENT-END
Apple mobile phones and iPad tablet PC hereafter refer as “Apple phone”. Before using the
software, please open the phone Wi-Fi function or 3G data services, and ensure the Apple phone
can connect to the internet properly.
6.1 Install the Client-end software
Use Apple phone to search "iHomeCam" Client-end Software ( as below picture ) in the Apple
App Store, and online install the software.
17
6.2 Add network DVR methods
6.2.1 After client-end software installation is completed, return to the Apple phone desktop, and
search icon "iHomeCam", as below pictures.
6.2.2 Click to run the client software to display the following interface
18
Add DVR methods (3 methods for choice)
Equipment real-time viewing shortcut interface
Equipment event lists
Add camera
Mobile phone Software version
6.2.2.1 Add Local area network DVR
Click
and
to begin searching for Local area network DVR. Select the DVR, enter
the password. Click the "Save" added to the list.
6.2.2.2 QR Code (Two-dimensional code) scanning network DVR
Click
to begin QR code scanning network DVR. Select the DVR, enter the password.
Click the "Save" added to the list.
6.2.2.3 Manually add the DVR
Click
to add network DVR,adding devices windows appears. Click the "Save"
added to the list.
【System name】User-defined name, Camera
【DID】is the DVR unique identification No#. There is a series No# in the network DVR
“System Information” or on the back of the label, please input it.
【Password】initial password is 000000
Note: Please change your password after first use for safety.
【Save】click Save after finishing above.
6.3 User operation
6.3.1After adding the network DVR successfully, click
, image on network DVR
19
can be viewed.
6.3.2 Click the icon
on the network DVR.
CH1-CH2-CH3-CH4, 4- channel camera images can be viewed
6.3.3 Full-screen display function: Start apple mobile phone to horizontal screen item and then put
it horizontally to get full-screen display function, then click the screen, the status bar is
hidden.
6.3.4 Introduction of Icon Function
Select camera channel (CH1/CH2/CH3/CH4)
Go back the last step.
Shooting pictures channel
Check the taken pictures
Select the audio mode
Mute
/
Listen
/
Speak
20
Displayed camera channel (CH1/CH2/CH3/CH4)
6.4 System settings
6.4.1Enter into system settings
Press
for 2 seconds, the below windows appear.
【Name】The initial device name
【Password】The initial device password 000000
【Advanced Setting】Access to the system parameter modification
【Reconnect】Refresh network signal coupling
6.4.2 Security Code settings
Fill the old password firstly, then fill the new password and confirm password, then click “OK”.
Note: Please change the password, after first use for security.
6.4.3 Video Quality
According to the customer’s internet conditions (e.g: Internet signal, speed) to adjust the
parameter (Max/High/Medium/Low/Min) of the real time play back results.
21
mean selected.
Click
to go back the last step.
6.4.4 About Device
Check the software and SD card total capacity and rest capacity.
6.5 Delete network DVR methods
Click
to delete the device,
appears, then click
,
appears,
then click
to finish.
22
7. USAGE
OF SOFTWARE AT ANDROID CLIENT-END
Android mobile phones and Android tablet PC hereafter refer as “Android phone”. Before using
the software, open the phone Wi-Fi function or 3G data services, and ensure the Android phone
can connect to the Internet properly.
7.1 Install the client-end software
Use Android phone to search "iHomeCam" Client-end Software in the Google play, users
online install the software, as below pictures.
7.2 Add network DVR methods
7.2.1 After client-end software installation is completed, return to the Android phone desktop, and
search icon "iHomeCam", as below pictures.
7.2.2 Click and operate the client software, the below windows appear.
23
Add DVR methods (3 methods for choice)
7.2.2.1 Add Local area network DVR
Click
to begin to search for Local area network DVR. Select the DVR, enter the
password. Click the "OK" added to the list.
7.2.2.2 Add Local area network DVR
Click
to begin to scan the QR (two dimensional) code
network DVR. Select the DVR, enter the password. Click the "OK" added to the list.
at the
7.2.2.3 Manually add the DVR
Click
to add network DVR,adding devices windows appears.
【System name】User-defined name, Camera
【DID】is the DVR unique identification No. There is a series No# in the network DVR “System
Information” or at the back of the label, please input it.
【Password】initial password is 000000
Note: Please change your password after first use for safety.
24
【OK】click Save after finishing above.
Android client-end software sequent operation settings are similar with the Apple phone operation,
please reference to 6.3 --6.4 items.
8. Statement
The specification and information in this manual is only for reference. Any content maybe be
updated (if any) without prior notice, unless there are special conventions. All statements,
information in this manual does not constitute any warranty or guarantee.
The version of the client-end software maybe be upgraded without prior notice, some features
maybe be different from this manual. Thanks for your cooperation.
9. Trouble Shooting
9.1 Devices are not pairing
1. Check the camera and DVR are correctly connected with power adapters and the power
supply is turned on.
2. Check the camera and DVR are pairing within 10 meters.
9.2 No images on the monitor
1. Check the camera and DVR are correctly connected with the power adapter and the power
supply is turned on.
2. Confirm LCD DVR status indicator is in green or red, green indicator means screen is turned
on; red indicator means screen is turned off.
3. Make sure there is nothing obstructing the view of the camera.
4. Make sure the camera is within the limited transmission distance.
5. Try re-pair the camera and DVR
9.3 Network can not connect or "failed”
1. Confirm DVR network indicator light is on.
2. Check DVR is connected properly. (Note: This product is no PPPOE dial function, can not
connect directly to the modem)
3. Make sure the router is turned on DHCP service.
4. Make sure ID number or password is filled correctly.
5. Make sure the router work normally.
9.4 Network connect successfully, but without images
1. Make sure the camera under this channel of DVR has image
2. Make sure the pairing between DVR and camera is successful.
3. Make sure the camera is within the limited transmission distance.
4. Make sure the network is ok, the network speed is not less than 128kbps.
5. Confirm the intelligent terminal CPU speed is not less than 1GHz, the early Android devices
can not reach this speed.
9.5 Wrong password can not be accessed
25
1. Check password is correct or not.
2. Select Restore factory settings in the network DVR menu, the system will be restored to the
factory default status.
26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement