PATGuard Lite 2 User Manual Rev1_4 A4

PATGuard Lite 2 User Manual Rev1_4 A4
Seaward PATGuard Lite 2 User Manual.
PATGuard Lite 2
User Manual
Rev. 1.4
-1-
Seaward PATGuard Lite 2 User Manual.
Contents
Disclaimer ......................................................................................................................................................... 4
License Agreement ................................................................................................................................................ 5
Introduction ........................................................................................................................................................... 6
Installing PATGuard Lite....................................................................................................................................... 7
Starting the Program .............................................................................................................................................. 7
Moving the Program to another PC ........................................................................................................................ 7
Help....................................................................................................................................................................... 9
The Startup Wizard.............................................................................................................................................. 11
User Accounts ..................................................................................................................................................... 12
Navigating PATGuard Lite .................................................................................................................................. 13
The Main Window ........................................................................................................................................... 13
Tree Data Structure .......................................................................................................................................... 13
Asset View ...................................................................................................................................................... 14
Context Menus................................................................................................................................................. 14
Finding Assets ................................................................................................................................................. 14
Test Results ......................................................................................................................................................... 16
Viewing Test Results ....................................................................................................................................... 16
Download ............................................................................................................................................................ 17
Downloading Test Results................................................................................................................................ 17
Download to Database ..................................................................................................................................... 17
Duplicate Test Results...................................................................................................................................... 17
Download to File ............................................................................................................................................. 18
PATGuard Lite Files............................................................................................................................................ 19
Processing Files ............................................................................................................................................... 19
PDA Files ........................................................................................................................................................ 20
Test Certificate Report ......................................................................................................................................... 21
Report Preview ................................................................................................................................................ 21
Utility Software ................................................................................................................................................... 22
Tester Software Update.................................................................................................................................... 22
Tester Logo Transfer........................................................................................................................................ 24
PrimeTest Data Transfer .................................................................................................................................. 24
Program Specification.......................................................................................................................................... 25
System Requirements........................................................................................................................................... 26
Accessories.......................................................................................................................................................... 27
Warranty and Support .......................................................................................................................................... 28
Replacement Licence Policy............................................................................................................................. 29
Rev. 1.4
-2-
Seaward PATGuard Lite 2 User Manual.
Figures
Figure 1: Login – Transfer button........................................................................................................................... 7
Figure 2: Login – Restore button............................................................................................................................ 8
Figure 3: Help Index window................................................................................................................................. 9
Figure 4: Help Contents window .......................................................................................................................... 10
Figure 5: Startup Wizard entry window................................................................................................................ 11
Figure 6: User Accounts window ......................................................................................................................... 12
Figure 7: The Main window ................................................................................................................................. 13
Figure 8: Example PATGuard Lite database tree .................................................................................................. 14
Figure 9: Find window ......................................................................................................................................... 15
Figure 10: Test Results......................................................................................................................................... 16
Figure 11: Download dialog box .......................................................................................................................... 17
Figure 12: Download dialog box – File ................................................................................................................ 18
Figure 13: Download File Process ........................................................................................................................ 19
Figure 14: Enter New Database Name window..................................................................................................... 19
Figure 15: Tester update dialog box ..................................................................................................................... 22
Figure 16: Select software update file dialog box ................................................................................................. 23
Figure 17: Update successfully completed............................................................................................................ 23
Rev. 1.4
-3-
Seaward PATGuard Lite 2 User Manual.
PATGuard Lite
Disclaimer
Although all Seaward Electronic Ltd. software Programs are tested before release, no claim is made concerning the accuracy of
the software or its associated documentation. Seaward Electronic Ltd., and Distributors of this software, cannot assume
liability or responsibility for any loss or damage arising from the use of this Program.
Copyright Notice
Copyright (c) 2010 Seaward Electronic Ltd.
All rights reserved. No part of this publication or software may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or any information storage and retrieval system without the
permission in writing from Seaward Electronic Limited.
Rev. 1.4
-4-
Seaward PATGuard Lite 2 User Manual.
License Agreement
This is a legal agreement between you (either an individual or an organisation) and Seaward Electronic Ltd. By installing this
software you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do
not install the software and promptly return the software and the accompanying items (including written materials and binders
or other containers if any) to the place you obtained them for a full refund.
SOFTWARE LICENCE
1.
GRANT OF LICENCE. Seaward Electronic Ltd. grants to you the right to use one copy of the enclosed Seaward Electronic Ltd.
software program (the "Software") on a single computer. The Software is in "use" on a computer includes when it is loaded into temporary
memory (i.e. RAM) or installed into permanent memory (e.g. hard disk or any other device).
2.
COPYRIGHT. The Software is owned by Seaward Electronic Ltd and is protected by copyright laws. Therefore you must treat
the Software like any other copyright material (e.g. a book or musical recording). You may not copy the written materials accompanying the
Software.
3.
OTHER RESTRICTIONS. You may not rent or lease the Software. You may not reverse engineer, decompile, or disassemble the
Software than otherwise provided for by law.
USE ON ONE COMPUTER ONLY. This license allows the Software to be installed into the permanent memory (hard disk) of only one
computer at a time.
LIMITED WARRANTY. Seaward Electronic warrants that (a) the Software will perform substantially in accordance with the
accompanying written materials for a period of one year from the date of receipt and (b) any hardware accompanying the Software will be
free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of receipt. Any
implied warranties on the Software and hardware are limited to one (1) year and one (1) year respectively.
CUSTOMER REMEDIES. Seaward Electronics' entire liability and your exclusive remedy shall be at Seaward Electronic' option, repair or
replacement of the Software or hardware that does not meet Seaward Electronic' Limited Warranty and which is returned to Seaward
Electronic with a copy of your receipt. This Limited Warranty is void if failure of the Software or hardware has resulted from accident,
abuse or misapplication. Any replacement Software or hardware will be warranted for the remainder of the original warranty period.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event shall Seaward Electronic Ltd. be liable for any damages whatsoever
(including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other
pecuniary loss) arising out of the use of or inability to use this Seaward Electronic product, even if Seaward Electronic has been advised of
the possibility of such damages.
REGISTRATION. Within seven days of installing the software you are required to register the software with Seaward Electronic Ltd. By
registering you acknowledge that you have read this Agreement and understand and agree to be bound by its terms and conditions without
exception, deletion or alteration. You also agree that this Agreement sets out in full the Agreement between you and Seaward Electronic Ltd.
which supersede any proposal or prior Agreement, oral or written, and any other communication between you and Seaward Electronic
relating to the subject matter of this Agreement.
INDEMNITY. You agree to indemnify Seaward Electronic Ltd. against any loss damage or expense arising out of or in connection with any
unauthorized use, reproduction, sale, making available, by you of the Software including any loss, damage or expense arising out of the
subsequent use of the Software by any other person.
GOVERNING LAW. This Agreement is governed by the laws of England and Wales.
Rev. 1.4
-5-
Seaward PATGuard Lite 2 User Manual.
Introduction
Welcome to PATGuard Lite, Seaward’s concise software program for safety record keeping. With its limited
functionality and minimal records, PATGuard Lite is easy and simple to use.
Easy upgrade options and record sharing with other PATGuard users is achieved through PATGuard database
compatibility across the range. While versatility is provided through the capability of processing data download
from most portable appliance testers currently available.
With easy to use and automated features associated with the acclaimed PATGuard style, PATGuard Lite is for
users who require a limited straightforward PAT record system.
Rev. 1.4
-6-
Seaward PATGuard Lite 2 User Manual.
Installing PATGuard Lite
Note
Before installing PATGuard Lite ensure no other application programs are running.
Installing PATGuard Lite is easy, simply insert the CD into your CD driver. The program should automatically
commence the installation.
If the CD does not automatically start up, then use Windows Explorer or other file management applications to
select your CD drive, double click with the mouse on the setup.exe file to start the installation.
Follow the on-screen instructions.
Starting the Program
If PATGuard Lite has been purchased, complete the installation by entering the Serial Number from inside the CD
ROM case. The Serial Number will then try to activate the program – by default this will be on-line via the
Internet. If an Internet connection is not available select an alternative activation method and follow the on-screen
instructions.
If the PATGuard Lite Evaluation program has been installed it will run unrestricted for 30 days.
Moving the Program to another PC
It is possible to move the PATGuard Elite licence from one computer to another. Simply select Transfer… at the
Login window to deactivate the original program.
Figure 1: Login – Transfer button
Rev. 1.4
-7-
Seaward PATGuard Lite 2 User Manual.
The Transfer… button will change to Restore… to enable the licence to be re-activated.
Figure 2: Login – Restore button
Another computer with PATGuard Elite already installed will now be able to run the program. To return to the
original computer, select Transfer… to deactivate the licence. At the original computer select Restore… to
re-activate the licence and run the program.
The above Transfer process requires an internet connection. If an Internet connection is not available request a
manual transfer by email to [email protected]
Rev. 1.4
-8-
Seaward PATGuard Lite 2 User Manual.
Help
The program has an on-line Help facility. Select Help Topics from the Help drop down to get help while using the
program.
Note
The Help information is for the PATGuard Elite program as this contains all of the functionality of PATGuard 2.
All the features of PATGuard Lite are covered however there are also additional topics which are not relevant.
Figure 3: Help Index window
There are two tabs; Contents and Index.
Rev. 1.4
-9-
Seaward PATGuard Lite 2 User Manual.
Figure 4: Help Contents window
•
Index enables you to look for a specific topic, either from the list or by typing into the Find field to search
for a topic.
•
Contents enables you to view the Help like a book. The program is covered by a number of books. To
open up a book to deal with that section of the program, double click the book with the mouse. Select the
chapter in the book you are interested in.
Rev. 1.4
- 10 -
Seaward PATGuard Lite 2 User Manual.
The Startup Wizard
Figure 5: Startup Wizard entry window
The Startup Wizard is displayed every time the program is started. It offers a simple choice of the actions available
to you.
Open an existing database will allow you to display the records contained within a database file.
Download a tester will enable you to download a tester and create a database file.
Process a file will enable you to process download files including files from PATGuard Work About
Rev. 1.4
- 11 -
Seaward PATGuard Lite 2 User Manual.
User Accounts
Figure 6: User Accounts window
User Accounts enables you to register other users of the program. Each user will have a User Name and
Password. Each User is assigned certain Permissions.
Available Permissions are (in increasing levels of access):
View
View, Add
View, Add, Edit
View, Add, Edit, Setup
View, Add, Edit, Delete, Setup
Note
Only users with Permissions allowing Setup will be able to enter the User Accounts screen and amend Usernames,
Passwords and Permissions.
To register another user, select Add then simply enter a Name, Password and select Permissions level from the
drop down. Then select OK to complete the action. There is no limit to the number of users that can be registered.
To remove another user, select the user to be removed with the mouse, select Delete and select OK to confirm the
deletion.
Note
On first using the program, Username Admin has no Password set. To prevent unauthorised access to the program
change the Admin Password.
The Username Admin and full Permissions (for Admin) cannot be changed and are fixed within the program.
Rev. 1.4
- 12 -
Seaward PATGuard Lite 2 User Manual.
Navigating PATGuard Lite
The Main Window
Figure 7: The Main window
u The Tree View displays the Site and Location
v The Asset display area
Tree Data Structure
PATGuard Lite can only display one database at any one time although a number of databases can be created and
selected from.
The PATGuard Lite database is structured around the physical location (Site & Location) of Assets (items requiring
testing such as portable appliances).
Rev. 1.4
- 13 -
Seaward PATGuard Lite 2 User Manual.
Figure 8: Example PATGuard Lite database tree
A Site may also contain a number of Locations, such as individual rooms or departments.
Asset View
By selecting a Site or Location from within the tree the right-hand view will display all the Assets within the
selected Site or Location.
All deleted Assets are placed in the Recycled bin. If the bin is emptied they will be deleted permanently. The
contents of the bin will be displayed if Recycled is selected. Assets can be retrieved from the bin by selecting the
Asset, right mouse click to display the context menu, then select Restore.
Context Menus
All Icons have a right mouse button action. The following actions can be initiated from the right mouse button:
Site
Rename
Print Test Certificates..
Send to PDA..
Location
Rename
Print Test Certificates..
Send to PDA..
Assets
Restore if Recycled bin selected
Details..
Test Results..
Print Test Certificate..
Send to PDA..
Delete
Recycled
Empty Recycled Bin
Finding Assets
To quickly find an Asset or group of Assets within the database the program contains a search facility.
From the Edit dropdown box select Find to display the following window.
Rev. 1.4
- 14 -
Seaward PATGuard Lite 2 User Manual.
Figure 9: Find window
Type the Asset ID or set other search criteria then select Ok to begin the search. The Asset will be shown
highlighted when found.
If there is more than one Asset then the Find Next action will become available from the Edit drop down. Select
Find Next to highlight other Assets found.
Rev. 1.4
- 15 -
Seaward PATGuard Lite 2 User Manual.
Test Results
Viewing Test Results
From the Asset Details dialog box, selecting the Test Results button will display the Test Results for that Asset.
Figure 10: Test Results
Rev. 1.4
- 16 -
Seaward PATGuard Lite 2 User Manual.
Download
Downloading Test Results
Download is initiated from the Tools drop down or from the Download icon. Selecting either of these will cause
the Download dialog box to be displayed.
Figure 11: Download dialog box
Downloaded data can either be sent to the database for processing or saved as a file. The file is a copy of the Test
Results directly from the tester but saved in a file that can be opened by this and other programs.
Note
The Supernova, Europa and PrimeTest 300 / 350 tester series have two download formats; SSS and ASCII text
(PATS).
As the SSS format contains all information and the ASCII text output is limited, this program will only accept data
in SSS format from these testers. The ASCII text output is for use with non-Seaward programs.
Download to Database
Ensure the Download to Database radio button is selected. Choose a tester from the Test Instrument drop down.
Select the appropriate serial port from the COM Port drop down.
Note
Only serial ports that are free and available to the program will be included in the COM Port drop down.
With the tester connected to the appropriate COM Port, select OK to commence the download. Initiate the
download on the tester. See the tester Instruction Manual on how to commence a download action.
Duplicate Test Results
During a download if more than one Test Result with the same Asset ID and Site is detected a warning message is
displayed to determine if the second and subsequent Test Results are additional Test Results for the same Asset or a
duplicate test. Selecting Yes to the question Duplicate ? will cause the second Test Result to be re-routed to a
specially created holding Site to be deleted or amended by the user. Selecting No will cause the second Test Result
to be appended to the first Test Result’s Asset record.
Rev. 1.4
- 17 -
Seaward PATGuard Lite 2 User Manual.
Download to File
Selecting Download to File will cause the following dialog box to appear.
Figure 12: Download dialog box – File
Enter a path and filename or use the Browse… button to choose a path available to your computer.
Some tester outputs require File Type set to txt as they output text ASCII data only. All current Seaward testers
have an SSS format and as this format contains all data it is preferred. For these testers ensure that the format is
SSS and set File Type to sss.
Choose a tester from the Test Instrument drop down. Select the appropriate serial port from the COM Port drop
down.
With the tester connected to the appropriate COM port, select OK to commence the download. Initiate the
download on the tester. See the tester Instruction Manual on how to commence a download action.
Downloaded files can be processed into any database (see Processing Files). Downloaded files are processed as if
the data was coming directly from a real-time download.
Rev. 1.4
- 18 -
Seaward PATGuard Lite 2 User Manual.
PATGuard Lite Files
Processing Files
Download files from other programs including PATGuard Work About can be processed into a new database.
Download files are of two types: *.txt for those testers that only download in ASCII text format and *.sss for
Seaward Super String (SSS) downloads from current Seaward testers or generated by PATGuard Work About.
From the Tools drop down select Process File then select the path of the file you wish to process. Select the correct
File of type. Then select Open. The following dialog box will be displayed if the file type is text.
Figure 13: Download File Process
Text files require a Usercode setting which corresponds to the Usercode entered during testing. Use the drop down
to select the appropriate setting. A Person can be entered and assigned as responsible for the testing. Each entry of
a new Person will add to the drop down list so that selecting from the drop down will be available later.
As sss files contain all necessary information and do not require Usercodes, the above dialog box is not necessary
and is not displayed.
The program will now require a database name to process the file, so the following window will be displayed.
Figure 14: Enter New Database Name window
Enter a new database name and path if necessary then select Save to process the file.
The download data will be processed as if it came directly from the PAT tester.
Rev. 1.4
- 19 -
Seaward PATGuard Lite 2 User Manual.
PDA Files
PDA files can be created at any level by selecting the Site, Location, Asset or group of Assets then right mouse
click to display the context menu and selecting Send to PDA… A Save As… window is then displayed to enable a
path and filename to be set. The Upload file type is xpg. This file when saved will contain a PDA version of the
records at the selected level.
These files are used by PATGuard Work About which is the PDA version of this program. For a trial version select
Try other programs and select PATGuard Work About.
Rev. 1.4
- 20 -
Seaward PATGuard Lite 2 User Manual.
Test Certificate Report
Reports are launched from the main window by selecting a Site, Location, Asset or group of Assets the right mouse
click to display the context menu. Select Print Test Certificate… Test Certificates will be printed for all Assets
below the selected level.
Report Preview
This program will display the Report, as it would be printed.
Use
Use
to view other pages.
to zoom in or out.
Use
to print the current page. Use right mouse button for printer settings.
Use
to print all pages. Use right mouse button for printer settings.
Use
to attach the Report to e-mail.
Use
to save the Report as a file. Use File Type to save files other than *.ll. (default). Use the Saved Report
Viewer within the program group to view saved Reports for File Type *.ll. Reports can be saved as pdf files for
use with Adobe Acrobat.
Use
Rev. 1.4
to exit the Preview.
- 21 -
Seaward PATGuard Lite 2 User Manual.
Utility Software
The Start Menu program group contains two SNEU Utilities programs for use with Supernova and Europa type
testers; Tester Software Update and Tester Logo Transfer. These programs have specific actions which help
support the Seaward Supernova / Europa range of testers.
There is also a PrimeTest Utilities program for use with the PrimeTest 300 / 350 testers: PrimeTest Data Transfer
Tester Software Update
This program is used to update the software in the Supernova / Europa testers.
CAUTION
Do not use this program to update the software in your tester as you may install the wrong software and thus
disable the tester. This program is for use with certain accessories which require other tester software to be
installed. Information on how to do this is provided with these accessories. It may also be used at the request of
Seaward Technical Support or their representatives who may provide a software file.
The following is guidance on using this program should you be requested to do so.
CAUTION
Before updating the tester and any PC software; download the tester (if the results in memory are of value) as it is
necessary to CLEAR RESULTS MEMORY and CLEAR UPLOAD MEMORY after the update. Failure to comply with the
above will render any results irretrievable after update.
Connect from the tester serial port to the PC serial port with the Download Lead supplied.
Run the Tester Software Update program. The following screen is displayed:
Figure 15: Tester update dialog box
Follow the instruction on the screen to put the tester into Software Update mode.
Rev. 1.4
- 22 -
Seaward PATGuard Lite 2 User Manual.
Note
QWERTY keypad refers to Seaward Supernova Elite / Plus, Supernova XE, Supernova, Europa Plus testers,
Numeric keypad refers to Seaward Europa testers, HAL/G2 refers to specific Clare tester models.
When the tester and the program have established communications the following screen will be displayed:
Figure 16: Select software update file dialog box
It is necessary to select the correct software update file to be loaded into the tester. Select and open the appropriate
file.
The update to the tester will start automatically, its progress shown in the program window.
When the update has completed successfully, the following screen is displayed:
Figure 17: Update successfully completed
Rev. 1.4
- 23 -
Seaward PATGuard Lite 2 User Manual.
Select Exit at the Toolbar to close the program.
Note
Should the update fail part way through for whatever reason, perhaps the cable is accidentally disconnected then it
is not necessary to re-establish communication. By selecting the button Send Another Software Update File the
file can be re-selected and sent again.
To complete the update process on the tester, power off the tester then power back on after about 5 seconds
checking that the new software version number is displayed.
It is necessary to restore FACTORY SETTING, CLEAR RESULTS MEMORY and CLEAR UPLOAD MEMORY
on the tester to enable the new software to function correctly (see the tester Instruction Manual).
Tester Logo Transfer
This program is used to transfer a label title and a logo to the tester for use with the Seaward Test ‘N’ Tag System.
Full details on using this are provided with the Test ‘N’ Tag System. This program has no use other than with the
Test ‘N’ Tag System.
PrimeTest Data Transfer
This Utility program is a copy of the program supplied on a CD with the PrimeTest 300 and 350 testers. Refer to
the tester Operating Instructions on how to use this program.
Rev. 1.4
- 24 -
Seaward PATGuard Lite 2 User Manual.
Program Specification
The program group consists of:
PrimeTest Utilities
Documentation & Links
Supernova & Europa Utilities
Report Designer Help (Report Designer not available in PATGuard Lite)
Saved Report Viewer
Seaward PATGuard 2
Seaward PATGuard 2 Help
The program can receive downloaded data from the following PAT testers:
PAT1000
PAT1000S
PAT1000X
IT1000
PAT2000
PAT2000i
PAT2000iee
SEN60204
Rev. 1.4
Europa
Europa Plus
Europa PAC Plus
Europa XE
Europa XE Plus
Supernova
Supernova Plus
Supernova Elite
Supernova XE
Supernova XE Plus
PrimeTest 300
PrimeTest 350
Ethos 9600
Ethos 9500
Ethos 9300
Clare HAL
Clare HAL Combi
Clare SafeCheck 8
Clare SafeTest Luminaire
Clare SafeTest Manufacturing
Emona Maestro
- 25 -
Avo PAT4
Avo PAT4F
Robin SmartPAT 5000
Robin SmartPAT 5500
Metrohm MicroPAT+
Metrel OmegaPAT
Metrel BetaPAT
Seaward PATGuard Lite 2 User Manual.
System Requirements
IBM Compatible PC
Processor Speed 500MHz or higher
Microsoft Windows XP / Vista / Window 7
32 & 64 bit operating systems
512Mb RAM
150Mb available hard disk space
Colour monitor with 32 bit colour or greater video card
CD ROM drive
Rev. 1.4
- 26 -
Seaward PATGuard Lite 2 User Manual.
Accessories
Download lead for:
PAT1000
PAT1000S
PAT1000X
PAT2000
Part Number
194A907
Part Number
194A919
PATGuard Elite Upgrade
PATGuard Pro Upgrade
Part Number
Part Number
352A934
352A935
PATGuard Time Manager software
PATGuard Work About software
Part Number
Part Number
334A910
336A910
PATGuard Lite Update (to latest version)
Part Number
352A932
Download lead for:
Europa PAC Plus
Europa
Europa Plus
Europa XE
Europa XE Plus
Supernova
Supernova Elite
Supernova Plus
Supernova XE
Supernova XE Plus
Rev. 1.4
Robin SmartPAT 5000
Metrohm MicroPAT
IT1000
PAT2000i
PAT2000iee
SEN60204
- 27 -
Seaward PATGuard Lite 2 User Manual.
Warranty and Support
Seaward Electronic Ltd provide a 1 year warranty for this software package (see License Agreement). A prerequirement for Warranty and Support is that the Product Registration is completed on the Seaward Website.
Telephone Support is provided free for the first 30 days. To receive Telephone Support after the initial 30 days, a
Software Support Agreement would need to be taken out directly with Seaward Electronic Ltd.
For this and further information contact:
Seaward Electronic Limited
Bracken Hill
South West Industrial Estate
Peterlee
Co. Durham
SR8 2SW
England
www.seaward.co.uk
e-mail: [email protected]
Telephone Support Helpline:
Fax:
Rev. 1.4
+44 (0)191 5878718
+44 (0)191 5860227
- 28 -
Seaward PATGuard Lite 2 User Manual.
Replacement Licence Policy
The Seaward software licence agreement states:
“USE ON ONE COMPUTER ONLY. This license allows the Software to be installed into the permanent memory (hard disk) of only one
computer at a time.”
The loss of the activated PC also results in loss of the licence if it is not possible to transfer the licence.
If the PC is insured then we suggest that a claim is also made for a replacement program or Additional PC Licence
(dependant on program type) for your lost licence.
If there is no insurance then we would require documented proof to confirm the following:
I. The PC is damaged such that the program is not recoverable
II. The PC has been stolen
III. The PC has been destroyed / disposed of
Suggested proof of loss could be:
I. Engineer Service report
II. Police report – if stolen
III. Disposal receipt (WEEE directive)
IV. Or any other appropriate documentation
We reserve the right to determine if the proof provided is sufficient for a replacement licence to be issued free of
charge.
If the proof is insufficient, not available or not provided to us, we can provide a replacement licence at a cost
equivalent to an Additional Licence or replacement program, depending on program type.
Rev. 1.4
- 29 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement