advertisement
center
6.3mm
10mm
Quick Start Guide
3mm
K206-10U1 9.6" Liquid Crystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly.
Please refer to the User's Manual for more detailed installation and safety instructions.
5mm 5mm
4mm
2.25mm
Front View
3.5mm
2.25mm
4mm
Other Models
The information in this Quick Start Guide applies to all models shown below.
3.5mm
3mm
Speaker
Speaker
DC 12V
4-IN-1
HEADPHONE ANT
Volume
adjust
DC 12V 4-IN-1 HEADPHONE ANT
中線
Menu
Remote IR sensor
Source
Channel
select
Power indicator LED
DC 12V
4-IN-1 Antenna/Cable TV
Headphone jack
Note: Do not unzip the plush cover. The plush
cover may only be removed by the qualified
personnel to service the product.
1mm
Making Connections
3.5mm
Connecting to Antenna/Cable TV
DC 12V 4-IN-1 HEADPHONE ANT
DC 12V 4-IN-1 HEADPHONE ANT
Antenna
ANT jack
(VHF/UHF IN Jack)
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT Jack
(VHF/UHF IN Jack) on the back of the
TV.
2. Connect the other end of the VHF/UHF
(Antenna) or CATV cable to the Antenna
or CATV socket.
6.3mm
Antenna/CATV coaxial cable
6.5mm
6mm
Connecting to a VCR, VCD, DVD Player, or Video Game Console
1. The illustration presented
here shows you how to
connect your TV to a
VCR, VCD, DVD player
or video game console.
DC 12V 4-IN-1 HEADPHONE ANT
VCR
VCD
DVD
2. The cables are
color-coded (black,
red, white, and yellow).
Connect each color-
coded cable to
the appropriate
connector on your
device.
4-IN-1 A/V jack
DC 12V 4-IN-1 HEADPHONE ANT
Video game console
B
S-Video connector
R
W
Y
4-IN-1 A/V cable
6mm
Connecting the Power Adapter
B R W Y
AV connectors
5.8mm
DC-IN
DC 12V 4-IN-1 HEADPHONE ANT
DC 12V 4-IN-1 HEADPHONE ANT
Power adapter
Power outlet
1. Connect the power cord to the power
adapter as illustrated.
Power cord
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
1mm
A/V and Channel Setup
3mm 2mm
3.5mm
Watching Broadcast or Cable TV
3mm
6mm
1. After you have made the appropriate power and source
connections, press the power button to turn on your television.
2. Press the SOURCE button to select TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
4. Press the CH button to select the TV setting.
5. Press the MENU button.
6. Press the CH or CH button to select TV/CATV.
menu
CH
VOL VOL
CH
SOURCE
6mm
Selecting A/V Sources
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
2. Press the SOURCE button on the
control panel to select different source signals.
TV/CATV channel number, AV or S-Video
appear on the screen.
6mm
Auto Channel Setup
TV
AV
S-Video menu
CH
VOL VOL
CH
SOURCE
1. Press the MENU button to enter the OSD menu.
2. Use the channel buttons on the control panel to select the “TV Setting” menu.
3. Press menu again until the “Auto Program” feature is selected.
4. Press CH to select yes.
5. Press the button.
6. Your television will begin automatically memorizing the available channels.
Auto Program
TV Setting
AUTO Program
Channel
+-
YES NO
ENTER
Copyright 2004, Hannspree California, Inc. All rights reserved.
5mm
MAD-001093 9.4mm
6.1mm
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project