Brochure

Brochure
Solid-State Motor Control
Table of Contents
ArmorStart® Distributed Motor Controller
0
• Bulletin 280/281 ........................................................................................................................................ Page 4-4
• Bulletin 283 .............................................................................................................................................. Page 4-20
1
• Bulletin 284 .............................................................................................................................................. Page 4-34
ArmorStart® Distributed Motor Controller — Safety Version
2
• Bulletin 280D/281D .................................................................................................................................. Page 4-57
• Bulletin 284D ............................................................................................................................................ Page 4-68
• Bulletin 100 DSA I/O for Distributed Starters ........................................................................................ Web‡
3
Three-Phase Power Media
• Three-Phase Power Trunk Cables .......................................................................................................... Page 4-97
4
• Three-Phase Power Drop Cables ............................................................................................................ Page 4-98
• Three-Phase Power Tees and Reducers ................................................................................................ Page 4-99
• Three-Phase Power Receptacles ............................................................................................................ Page 4-101
5
Control Power Media
• Control Power Cordsets and Patchcords .............................................................................................. Page 4-103
6
• Control Power T-Ports .............................................................................................................................. Page 4-104
• Control Power Receptacles .................................................................................................................... Page 4-105
7
• Control Power Shorting Plugs ................................................................................................................ Page 4-106
Solid-State Reduced Voltage Starters
• SMC™ Flex Smart Motor Controller........................................................................................................ Page 4-112
8
• SMC™-3 Smart Motor Controller ............................................................................................................ Page 4-136
• SMC™ Dialog Plus Smart Motor Controller............................................................................................ Page 4-159
9
• STC™ Starting Torque Controller ............................................................................................................ Web‡
Solid-State Contactors
10
• Bulletin 156 .............................................................................................................................................. Page 4-169
11
‡ Information for this product line is available on the Industrial Controls Catalog website: www.ab.com/catalogs.
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-1
Bulletin 280/281/283/284
ArmorStart® Distributed Motor Controller
Product Overview
0
1
Bulletin
280A/281A
283A
284A
280D/281D
ArmorPoint®
Type
283D
284D
DeviceNet™
280E/281E
284E
EtherNet/IP™
Horsepower Range:
2
0.5…10 Hp (0.37…7.5 kW)
—
—
—
—
—
0.5…10 Hp (0.37…5.5 kW)
—
—
—
—
—
—
0.5…5 Hp (0.4…3.0 kW)
—
—
—
—
—
Full-Voltage and Reversing
—
—
—
—
—
Current Limit, Soft Start including
Soft Stop
—
—
—
—
—
—
Starting Method:
3
Sensorless Vector Performance
—
—
—
—
—
—
Sensorless Vector Control
—
—
—
—
—
Environmental Rating:
4
IP67/NEMA Type 4
NEMA Type 4X
—
—
—
—
—
Control Voltage:
5
24V DC
120V AC
—
—
240V AC
—
—
Operational Voltage Ratings:
6
7
200…480V AC
—
—
—
200…240V AC
—
—
—
—
—
—
380…480V AC
—
—
—
—
—
500…575V AC
—
—
Rated for Group Motor Installations
Local logic using DeviceLogix™
Four Inputs
—
—
—
Two Outputs
ControlNet™
—
—
—
—
—
DeviceNet
—
—
EtherNet/IP
I/O Capability:
Network Communications:
8
9
—
—
—
I/O Expansion with ArmorPoint Distributed I/O
Products
—
—
—
—
—
LED Status Indication
Gland Plate Entry:
10
Conduit Entrance
ArmorConnect® Power Media
Quick Disconnects (I/O, Communications, Motor
Connection, Three-Phase and Control Power)
Extended Length Motor and Brake Cables
HOA Keypad
Safety Monitor
—
—
Control Brake Contactor
—
—
—
—
—
—
Source Brake Contactor
—
—
—
Dynamic Brake Connector
—
—
—
—
—
Output Contactor
—
—
—
—
—
EMI Filter
—
—
—
—
—
Shielded Motor Cable
—
—
—
—
—
0…10V Analog Input
—
—
—
—
—
—
Page 4-8
Page 4-24
Page 4-38
Page 4-6
Page 4-22
Page 4-37
Page 4-6
Page 4-40
Factory Installed Options:
11
12
13
Product Selection
www.ab.com/catalogs
4-2
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281/283/284
ArmorStart Distributed Motor Controller
®
Product Overview
Product Line Description
The ArmorStart Distributed Motor Controller is an integrated, preengineered, motor starter solution for On-Machine applications. The
ArmorStart offers as standard, a robust IP67/NEMA Type 4
enclosure design, which is suitable for water wash-down
environments. Specific solutions may also be offered with NEMA
Type 4X rating, suitable for caustic wash down environments. Its
modular design offers simplicity in wiring using quick disconnects
for the I/O, communications, and motor connection. Optional quick
disconnects for control and three-phase power, fully integrates the
plug-n-play solution. As standard, the ArmorStart offers four inputs
and two outputs to be used with sensors and actuators. The
ArmorStart Distributed Motor Controller offers as standard, a local
at-motor disconnect means by incorporating the Bulletin 140M
Motor Circuit Protector. This eliminates the need for additional
components that would otherwise be required in each motor branch
circuit. The ArmorStart Distributed Motor Controllers are listed as
suitable for Group Motor installations.
LED Status Indication
The LED Status Indication provides four status LEDs and a reset
button. The LEDs provide status indication for the following:
POWER LED
RUN LED
1
NETWORK LED
FAULT LED
Reset Button
This is used as a local trip reset.
Motor Cable
A 3-meter unshielded, 4-conductor cordset is provided with every
ArmorStart Distributed Motor Controller.
Network and I/O Capabilities
The ArmorStart Distributed Motor Controller delivers enhanced
control and parameter configuration, device status, fault
diagnostics, and remote start/stop control. DeviceNet or EtherNet/IP
are standard communication protocols. The ArmorPoint Bus version
provides additional flexibility in communication and I/O options.
EtherNet/IP Version includes: Embedded dual port switch that
supports Device Level Ring (DLR), DHCP or static IP address
configuration, ControlLogix add-on profile, embedded web server,
four configurable 24V DC inputs with status indication, two
solid–state outputs with status indication, and IEEE Transparent
Clock.
DeviceNet Version includes: Four configurable 24V DC inputs with
status indication, two relay outputs with status indication,
ControlLogix add-on profile, and standardized HMI faceplates.
ArmorPoint Bus Backplane Version Includes: DeviceNet,
ControlNet, or EtherNet communication protocols, expandable I/O
and specialty modules, two relay outputs with status indication, and
a maximum of two ArmorPoint Distributed Motor Controllers per
ArmorPoint Distributed I/O network module.
DeviceLogix - Local logic control
DeviceLogix provides local control over the device's discrete and
network I/O. It consists of function blocks, inputs, outputs, and
actual hardware data, including fault and status bits.
Zone Interlocking Parameters (Peer-to-Peer)
Zone Interlocking Parameters (ZIP) allow peer-to-peer
communication and control across multiple zones. ZIP allows one
ArmorStart to consume data directly from up to three other
DeviceNet nodes without going through the network scanner. These
direct communications between conveyor zones are beneficial in a
merge, diverter, and accumulation conveyor applications. (Not
available with EtherNet/IP)
Gland Plate Entrance
The ArmorStart product offers two different methods for connecting
incoming three-phase and control power to the device. One method
offered is the traditional conduit entrance, which provides a 3/4 and
1 in. conduit hole opening for wiring three-phase and control power.
The second method offers connectivity to the ArmorConnect power
media. Factory-installed receptacles are provided for connectivity to
both three-phase and control power media.
2
3
Modes of Operation
Features
0
Bulletin 280 or 281 Full Voltage/Reversing Starter
This method is used in applications requiring across-the-line
starting. The ArmorStart Bulletin 280 offers full-voltage starting, and
the Bulletin 281 offers full-voltage starting for reversing applications.
Bulletin 283 Solid-State Motor Starter
Soft Start
The motor is raised from an initial torque value to full torque over a
preset time. This initial torque is adjustable to 15, 25, 35, or 65% of
locked rotor torque. The motor voltage is gradually increased during
the acceleration ramp time, which can be adjusted from 1…45 s.
Current Limit Start
This starting mode is used when it is necessary to limit the
maximum starting current. It can be adjusted for 150…450% of full
load amps. Start times are selectable from 1…45 s.
Selectable Kick Start
A kickstart, or boost, at the beginning of the start mode is intended
to provide a current pulse of 450% of the full load current. The
kickstart time is adjustable from 0.5…1.5 s. This allows the motor to
develop additional torque at startup for loads that may need an
initial boost.
Soft Stop
The Soft Stop function can be used with applications that require an
extended coast to rest. When enabled, the voltage ramp-down time
can be selected from 1…90 s. The motor will stop when the motor
voltage drops to a point where the load torque is greater than the
motor torque.
Bulletin 284 Variable Frequency Drive
Sensorless Vector Performance (Volts per Hertz)
This method provides excellent speed regulation and high levels of
torque across the entire speed range of the drive, and improved
speed regulation even as loading increases. Basic control yields the
most cost-effective performance when sensorless vector control is
not required.
Sensorless Vector Control (SVC)
Sensorless vector control provides exceptional speed regulation and
very high levels of torque across the entire speed range of the drive.
Optimized Performance:
4
5
6
7
8
9
10
Removable MOV provides trouble-free operation when used on
ungrounded distribution systems.
11
A relay pre-charge limits inrush current.
Integral brake transistor provides dynamic braking capability
using low cost IP20 brake resistors or IP67 plug and play
resistors.
150% overload for 60 seconds or 200% overload for 3 seconds
provides robust overload protection.
12
Adjustable PWM frequency up to 16 kHz ensures quiet operation.
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-3
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Product Overview
280/281 ArmorStart Distributed Motor Controller
On-Machine starting solution
Full-voltage and reversing
Horsepower range 0.5…10 Hp (0.37…7.5 kW)
Robust IP67/NEMA Type 4 or NEMA Type 4X enclosure rating
Quick disconnect connections for I/O, communications, motor, threephase and control power
Gland plate entry: conduit entrance or ArmorConnect power media
LED status indication
EtherNet/IP, DeviceNet, or ControlNet communications
Local logic technology using DeviceLogix
Peer-to-peer communication (ZIP) (not available with EtherNet
communications)
Connectivity to ArmorPoint distributed I/O products
Factory installed options:
− Hand/Off/Auto (HOA) keypad configuration
− Safety monitor
0
1
2
3
Table of Contents
Product Selection ...... 4-6
Options .......................... 4-8
Accessories.................. 4-79
Specifications.............. 4-9
Approx. Dimensions . 4-16
Standards Compliance
UL 508
CSA C22.2, No. 14
EN/IEC 60947-4
EN/IEC 60947-4-1
CE Marked per Low Voltage
Directive 2006/95/EC and EMC
Directive 2004/108/EC
CCC
ODVA for EtherNet/IP and
DeviceNet
Certifications
cULus (File No. E3125, Guides
NLDX, NLDX7)
4
Mode of Operation
Full-Voltage Start
5
6
7
Fault Diagnostics
Fault diagnostics capabilities built in the ArmorStart Distributed
Motor Controller:
Output Power Fuse Detection
Short Circuit
Overtemperature
Overload
Phase Imbalance
Phase Loss
DeviceNet Power Loss
Control Power Loss
EEPROM Fault
Control Power Fuse Detection
Hardware Fault
I/O Fault
This method is used in applications requiring across-the-line
starting. Full in-rush current and locked-rotor torque are realized.
The ArmorStart Bulletin 280 offers full-voltage starting, and the
Bulletin 281 offers full-voltage starting for reversing applications.
100%
Percent
Factory-Installed Options
Voltage
HOA Selector Keypad
The HOA Selector Keypad allows local start/stop control.
Safety Monitor
8
Time (seconds)
Overload Protection
9
10
The Bulletin 280/281 ArmorStart Distributed Motor Controller
incorporates, as standard, electronic motor overload protection. This
overload protection is accomplished electronically with an I2t
algorithm. The ArmorStart’s overload protection is programmable via
the communication network providing the user with flexibility. The
overload trip class can be selected for class 10, 15, or 20
protection. Ambient insensitivity is inherent in the electronic design
of the overload.
The Safety Monitor Option allows independent monitoring of the
output status of the device. The function is implemented using a
normally closed contact which complies with IEC 60947-5-1 for
mechanically linked contacts. Two terminal blocks are provided as
the inputs which maybe used with an external safety circuit. The
external safety circuit monitors the status of the isolation contactor.
11
12
13
www.ab.com/catalogs
4-4
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Catalog Number Explanation
Catalog Number Explanation
Examples given in this section are for reference purposes. This basic explanation should not be used for product selection; not all
combinations will produce a valid catalog number.
280
D – F
a
b
c
12Z – 10
d
C – CR – Option 1 – Option 2
e
f
g
h
1
i
a
e
h
Bulletin Number
Short Circuit Protection
(Motor Circuit Protector)
Option 1
Code
Description
280
Full-Voltage Starter
Code
Description
Reversing Starter
10
10 A Rated Device
25
25 A Rated Device
281
b
Code
Description
3
Hand/Off/Auto Selector Keypad
3FR
Hand/Off/Auto Selector Keypad with
Forward/Reverse
f
i
Overload Selection Current Range
Option 2
Communications
Description
A
ArmorPoint
Code
Description
Code
Description
D
DeviceNet
A
0.24…1.2 A
SM‡
Safety Monitor
E
EtherNet/IP
B
0.5…2.5 A
C
1.1…5.5 A
D
3.2…16 A
Enclosure Type
Code
Description
F
Type 4 (IP67)
S
Type 4X
2
3
Code
c
0
4
g
5
Control and 3-Phase Power Connections/Motor Cable Connection
(CR: Conduit/Round Media) or (RR: Round/Round Media)
Description
Code
d
CR
blank
Control Power
Conduit Entrance
3-Phase Power
Motor Cable
Conduit Entrance
3 m, unshielded cordset
male 90°
Contactor Size/Control Voltage§
24V DC
120V AC
240V AC
12Z
12D
12B
23Z
23D
23B
CR
W1
Conduit Entrance
Conduit Entrance
No cable
RR
blank
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
3 m, unshielded cordset
male 90°
RR
W1
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
No cable
6
7
1 See Accessories on page 4-82 for extended motor cable lengths.
Not available with EtherNet/IP or ArmorPoint versions.
‡ Not available with EtherNet/IP version, also not available with round media option (RR).
§ See Product Selection tables for additional information.
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-5
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Product Selection
EtherNet/IP Network Communication
0
1
2
3
4
5
Full-voltage starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 480V AC
kW
24V DC Control Voltage
Hp
Current
Rating [A]
230V AC, 50 Hz
400V AC, 50 Hz
200V AC, 60 Hz
230V AC, 60 Hz
460V AC, 60 Hz
Cat. No.
0.24…1.2
0.18
0.37
—
—
0.5
280E-F12Z-10A-CR
0.5…2.5
0.37
0.75
0.5
0.5
1
280E-F12Z-10B-CR
1.1…5.5
1.1
2.2
1
1
3
280E-F12Z-10C-CR
3.2…16
4
7.5
3
5
10
280E-F23Z-25D-CR
Full-voltage starters ⎯ IP67/NEMA Type 4 with ArmorConnect power media connections, Up to 480V AC
kW
24V DC Control Voltage
Hp
Current
Rating [A]
230V AC, 50 Hz
400V AC, 50 Hz
200V AC, 60 Hz
230V AC, 60 Hz
460V AC, 60 Hz
Cat. No.
0.24…1.2
0.18
0.37
—
—
0.5
280E-F12Z-10A-RR
0.5…2.5
0.37
0.75
0.5
0.5
1
280E-F12Z-10B-RR
1.1…5.5
1.1
2.2
1
1
3
280E-F12Z-10C-RR
3.2…16
4
7.5
3
5
10
280E-F23Z-25D-RR
Reversing starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 480V AC
kW
24V DC Control Voltage
Hp
Current
Rating [A]
230V AC, 50 Hz
400V AC, 50 Hz
200V AC, 60 Hz
230V AC, 60 Hz
460V AC, 60 Hz
Cat. No.
0.24…1.2
0.18
0.37
—
—
0.5
281E-F12Z-10A-CR
0.5…2.5
0.37
0.75
0.5
0.5
1
281E-F12Z-10B-CR
1.1…5.5
1.1
2.2
1
1
3
281E-F12Z-10C-CR
3.2…16
4
7.5
3
5
10
281E-F23Z-25D-CR
Reversing starters ⎯ IP67/NEMA Type 4 with ArmorConnect power media connections, Up to 480V AC
6
7
kW
24V DC Control Voltage
Hp
Current
Rating [A]
230V AC, 50 Hz
400V AC, 50 Hz
200V AC, 60 Hz
230V AC, 60 Hz
460V AC, 60 Hz
Cat. No.
0.24…1.2
0.18
0.37
—
—
0.5
281E-F12Z-10A-RR
0.5…2.5
0.37
0.75
0.5
0.5
1
281E-F12Z-10B-RR
1.1…5.5
1.1
2.2
1
1
3
281E-F12Z-10C-RR
3.2…16
4
7.5
3
5
10
281E-F23Z-25D-RR
8
DeviceNet Network Communications
9
10
11
Full-voltage starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 575V AC
kW
Hp
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
280D-F12Z-10B-CR 280D-F12D-10B-CR 280D-F12B-10B-CR
1.1…5.5
1.1
2.2
1
1
3
3
280D-F12Z-10C-CR 280D-F12D-10C-CR 280D-F12B-10C-CR
3.2…16
4
7.5
3
5
10
10
280D-F23Z-25D-CR 280D-F23D-25D-CR 280D-F23B-25D-CR
280D-F12Z-10A-CR 280D-F12D-10A-CR 280D-F12B-10A-CR
Full-voltage starters ⎯ IP67/NEMA Type 4 with ArmorConnect power media connections, Up to 575V AC
kW
12
24V DC
Control Voltage
Hp
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
280D-F12Z-10B-RR 280D-F12D-10B-RR 280D-F12B-10B-RR
1.1…5.5
1.1
2.2
1
1
3
3
280D-F12Z-10C-RR 280D-F12D-10C-RR 280D-F12B-10C-RR
3.2…16
4
7.5
3
5
10
10
280D-F23Z-25D-RR 280D-F23D-25D-RR 280D-F23B-25D-RR
280D-F12Z-10A-RR 280D-F12D-10A-RR 280D-F12B-10A-RR
13
www.ab.com/catalogs
4-6
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Product Selection
DeviceNet Network Communication, Continued
Full-voltage starters ⎯ NEMA Type 4X with conduit entrance, Up to 575V AC
kW
Hp
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
280D-S12Z-10A-CR 280D-S12D-10A-CR 280D-S12B-10A-CR
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
280D-S12Z-10B-CR 280D-S12D-10B-CR 280D-S12B-10B-CR
1.1…5.5
1.1
2.2
1
1
3
3
280D-S12Z-10C-CR 280D-S12D-10C-CR 280D-S12B-10C-CR
3.2…16
4
7.5
3
5
10
10
280D-S23Z-25D-CR 280D-S23D-25D-CR 280D-S23B-25D-CR
Hp
1
2
Full-voltage starters ⎯ NEMA Type 4X with ArmorConnect power media connections, Up to 575V AC
kW
0
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
280D-S12Z-10B-RR 280D-S12D-10B-RR 280D-S12B-10B-RR
1.1…5.5
1.1
2.2
1
1
3
3
280D-S12Z-10C-RR 280D-S12D-10C-RR 280D-S12B-10C-RR
3.2…16
4
7.5
3
5
10
10
280D-S23Z-25D-RR 280D-S23D-25D-RR 280D-S23B-25D-RR
3
280D-S12Z-10A-RR 280D-S12D-10A-RR 280D-S12B-10A-RR
4
Reversing starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 575V AC
kW
Current
Rating [A]
230V AC
50 Hz
Hp
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
5
0.24…1.2
0.18
0.37
—
—
0.5
0.5
281D-F12Z-10A-CR 281D-F12D-10A-CR 281D-F12B-10A-CR
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
281D-F12Z-10B-CR 281D-F12D-10B-CR 281D-F12B-10B-CR
1.1…5.5
1.1
2.2
1
1
3
3
281D-F12Z-10C-CR 281D-F12D-10C-CR 281D-F12B-10C-CR
3.2…16
4
7.5
3
5
10
10
281D-F23Z-25D-CR 281D-F23D-25D-CR 281D-F23B-25D-CR
6
Reversing starters ⎯ IP67/NEMA Type 4 with ArmorConnect power media connections, Up to 575V AC
kW
Hp
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
281D-F12Z-10B-RR 281D-F12D-10B-RR 281D-F12B-10B-RR
1.1…5.5
1.1
2.2
1
1
3
3
281D-F12Z-10C-RR 281D-F12D-10C-RR 281D-F12B-10C-RR
3.2…16
4
7.5
3
5
10
10
281D-F23Z-25D-RR 281D-F23D-25D-RR 281D-F23B-25D-RR
281D-F12Z-10A-RR 281D-F12D-10A-RR 281D-F12B-10A-RR
Reversing starters ⎯ NEMA Type 4X with conduit entrance, Up to 575V AC
kW
Hp
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
281D-S12Z-10A-CR 281D-S12D-10A-CR 281D-S12B-10A-CR
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
281D-S12Z-10B-CR 281D-S12D-10B-CR 281D-S12B-10B-CR
1.1…5.5
1.1
2.2
1
1
3
3
281D-S12Z-10C-CR 281D-S12D-10C-CR 281D-S12B-10C-CR
3.2…16
4
7.5
3
5
10
10
281D-S23Z-25D-CR 281D-S23D-25D-CR 281D-S23B-25D-CR
Hp
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
281D-S12Z-10B-RR 281D-S12D-10B-RR 281D-S12B-10B-RR
1.1…5.5
1.1
2.2
1
1
3
3
281D-S12Z-10C-RR 281D-S12D-10C-RR 281D-S12B-10C-RR
3.2…16
4
7.5
3
5
10
10
281D-S23Z-25D-RR 281D-S23D-25D-RR 281D-S23B-25D-RR
www.ab.com/catalogs
8
9
10
11
Reversing starters ⎯ NEMA Type 4X with ArmorConnect power media connections, Up to 575V AC
kW
7
12
281D-S12Z-10A-RR 281D-S12D-10A-RR 281D-S12B-10A-RR
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-7
13
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Product Selection/Options
ArmorPoint Bus Network Communication
0
Full-voltage starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 575V AC
kW
1
2
Hp
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
4
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
280A-F12Z-10A-CR 280A-F12D-10A-CR 280A-F12B-10A-CR
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
280A-F12Z-10B-CR 280A-F12D-10B-CR 280A-F12B-10B-CR
1.1…5.5
1.1
2.2
1
1
3
3
280A-F12Z-10C-CR 280A-F12D-10C-CR 280A-F12B-10C-CR
3.2…16
4
7.5
3
5
10
10
280A-F23Z-25D-CR 280A-F23D-25D-CR 280A-F23B-25D-CR
Full-voltage starters ⎯ IP67/NEMA Type 4 with ArmorConnect power media connections, Up to 575V AC
kW
3
24V DC
Control Voltage
Hp
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
280A-F12Z-10B-RR 280A-F12D-10B-RR 280A-F12B-10B-RR
1.1…5.5
1.1
2.2
1
1
3
3
280A-F12Z-10C-RR 280A-F12D-10C-RR 280A-F12B-10C-RR
3.2…16
4
7.5
3
5
10
10
280A-F23Z-25D-RR 280A-F23D-25D-RR 280A-F23B-25D-RR
280A-F12Z-10A-RR 280A-F12D-10A-RR 280A-F12B-10A-RR
Reversing starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 575V AC
5
6
kW
Hp
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
281A-F12Z-10A-CR 281A-F12D-10A-CR 281A-F12B-10A-CR
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
281A-F12Z-10B-CR 281A-F12D-10B-CR 281A-F12B-10B-CR
1.1…5.5
1.1
2.2
1
1
3
3
281A-F12Z-10C-CR 281A-F12D-10C-CR 281A-F12B-10C-CR
3.2…16
4
7.5
3
5
10
10
281A-F23Z-25D-CR 281A-F23D-25D-CR 281A-F23B-25D-CR
Reversing starters ⎯ IP67/NEMA Type 4 with ArmorConnect power media connections, Up to 575V AC
7
8
9
kW
Hp
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
0.24…1.2
0.18
0.37
—
—
0.5
0.5
0.5…2.5
0.37
0.75
0.5
0.5
1
1.5
281A-F12Z-10B-RR 281A-F12D-10B-RR 281A-F12B-10B-RR
1.1…5.5
1.1
2.2
1
1
3
3
281A-F12Z-10C-RR 281A-F12D-10C-RR 281A-F12B-10C-RR
3.2…16
4
7.5
3
5
10
10
281A-F23Z-25D-RR 281A-F23D-25D-RR 281A-F23B-25D-RR
281A-F12Z-10A-RR 281A-F12D-10A-RR 281A-F12B-10A-RR
Options — Factory Installed
10
Description
Cat. No. Modification
Hand/Off/Auto Selector Keypad (Bulletin 280)
-3
11
Hand/Off/Auto Selector Keypad with Forward/Reverse Function (Bulletin 281)
-3FR
12
-SM
Safety Monitor‡
13
Supplied ArmorStart without motor cable
-CRW
ArmorConnect Power Media Connectivity, ArmorStart supplied without motor cable
-RRW
Not available with EtherNet/IP version.
‡ Not available with round media option (RR).
www.ab.com/catalogs
4-8
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Specifications
Connections
Bulletin 280E/281E ArmorStart with EtherNet/IP Communications
0
Local
Disconnect
LED Status
Indication
1
2 Outputs
(Micro/M12)
2
4 Inputs
(Micro/M12)
Motor
Connection
IP Address
Switches
3
Embedded
2-Port Switch
Ground
Terminal
4
Bulletin 280D/281D ArmorStart with DeviceNet Communications
5
Local
Disconnect
LED Status
Indication
6
2 Outputs
(Micro/M12)
4 Inputs
(Micro/M12)
7
Motor
Connection
DeviceNet
Connection
(Mini/M18)
8
Ground
Terminal
9
Bulletin 280A/281A ArmorStart for the ArmorPoint Backplane
Local
Disconnect
10
LED Status
Indication
2 Outputs
(Micro/M12)
11
ArmorPoint
Interface (IN)
Motor
Connection
12
ArmorPoint
Interface (OUT)
Ground
Terminal
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-9
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Specifications
ArmorStart Receptacle Pin Outs
0
Receptacle Connections for ArmorPoint Interface (OUT)
Pin
Pin
Pin
Pin
Pin
Pin
Pin
1
1:
2:
3:
4:
5:
7:
8:
Receptacle Connections for Output, EtherNet/IP Version
(M12)
CAN high
Common
+5V
CAN low
Enable out
Common
NC (no connection)
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
NC (no connection)
NC (no connection)
Common
Output +24V DC (A1)
NC (no connection)
2
Receptacle Connections for ArmorPoint Interface (IN)
Receptacle Connections for Output, DeviceNet or
ArmorPoint Version (M12)
3
Pin
Pin
Pin
Pin
Pin
Pin
Pin
4
1:
2:
3:
4:
5:
7:
8:
CAN high
Common
+5V
CAN low
Enable out
Common
PE
Pin 1: PE
Pin 2: Return
Pin 3: Relay out
5
Receptacle Connections for DeviceNet Connector
Receptacle Connections for Incoming Control Power
6
Pin
Pin
Pin
Pin
Pin
7
8
1:
2:
3:
4:
5:
Drain (no connection)
+VDNET
-VDNET
CAN_H
CAN_L
Pin
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
6:
Unswitched (A3)(red)
Common (A2)(black)
PE (green)
Not used (blank)
Switched (A1)(blue)
Not used (white)
Receptacle Connections for EtherNet/IP (M12)
Receptacle Connections for Motor Connector 3 Hp or less (M22)
Pin
Pin
Pin
Pin
9
1:
2:
3:
4:
Tx+
Rx+
TxRx-
Pin
Pin
Pin
Pin
10
11
1:
2:
3:
4:
T1 (black)
T2 (white)
T3 (red)
Ground (green/yellow)
Receptacle Connections for Input (M12)
Receptacle Connections for Motor Connector 10 Hp (M35)
Pin
Pin
Pin
Pin
Pin
12
1:
2:
3:
4:
5:
+24V (A3 or DNET)
Input 0
Common
Input 1
NC (no connection)
Pin
Pin
Pin
Pin
13
www.ab.com/catalogs
4-10
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
1:
2:
3:
4:
T1 (black)
Ground (green/yellow)
T3 (red)
T2 (white)
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Specifications
ArmorStart Receptacle Pin Outs, Continued
Receptacle Connections for Incoming 3-phase Power 25 A Short Circuit Protection (M35)
Receptacle Connections for Incoming 3-phase Power 10 A Short Circuit Protection (M22)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
Pin
Pin
Pin
Pin
L1 (black)
L2 (white)
L3 (red)
Ground (green/yellow)
1:
2:
3:
4:
0
1
L1 (black)
Ground (green/yellow)
L3 (red)
L2 (white)
2
3
4
5
Electrical Ratings
Power Circuit
UL/NEMA
IEC
Rated Operation Voltage
200…575V
200…575V
Rate Insulation Voltage
600V
600V
Rated Impulsed Voltage
6 kV
6 kV
Dielectric Withstand
2200V AC
2500V AC
Operating Frequency
50/60 Hz
50/60 Hz
Utilization Category
N/A
AC-3
Protection Against Shock
N/A
Rated Operating Current Max.
6
7
IP2X
280_-___-10A-*
1.2 A
280_-___-10B-*
2.5 A
280_-___-10C-*
5.5 A
280_-___-10D-*
16 A
8
24V DC (+10%, -15%) A2 (should be grounded at voltage source)
Rated Operation Voltage
120V AC (+10%, -15%) A2 (should be grounded at voltage source)
240V AC (+10%, -15%) A2 (should be grounded at voltage source)
Control Circuit
Rate Insulation Voltage
250V
Rated Impulsed Voltage
—
4 kV
Dielectric Withstand
1500V AC
2000V AC
Overvoltage Category
—
III
Operating Frequency
50/60 Hz
Current Rating
250V
9
Voltage
480Y/277V
480Y/480V
600Y/347V
600V
Sym. Amps
RMS
65 kA
65 kA
30 kA
30 kA
30 kA
30 kA
30 kA
30 kA
0.24…1.2 A
Short Circuit
Protection
SCPD Performance Type 1
0.5…2.5 A
1.1…5.5 A
3.2…16 A
SCPD List
Size per NFPA 70 (NEC) or NFPA 79 for Group Motor Applications
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-11
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Specifications
UL/NEMA
0
Environmental
1
IEC
Operating Temperature Range
-20…+40 °C (-4…+104 °F)
Storage and Transportation
Temperature Range
–25….+85 °C (–13…+185 °F)
Altitude
2000 m
Humidity
5…95% (non-condensing)
Pollution Degree
3
Enclosure Ratings
NEMA 4/12/13
IP67
NEMA 4X‡
IP69K
Approximate Shipping Weight
18.1 kg (40 lb)
Resistance to Shock
2
Operational
15 G
Non-Operational
30 G
Resistance to Vibration
3
Operational
1 G, 0.15 mm (0.006 in.) displacement
Non-Operational
2.5 G, 0.38 mm (0.015 in.) displacement
Power and Ground Terminals
4
Wire Size
Primary/Secondary terminal:
(#16 …#10 AWG)
Primary/Secondary terminal:
1.5…4.0 mm2
Tightening Torque
Primary terminal:
10.8 lb•in
Secondary terminal:
4.5 lb•in
Primary Terminal:
(1.2 N•m)
Secondary terminal:
(0.5 N•m)
Mechanical
Wire Strip Length
0.35 in. (9 mm)
Control and Safety Monitor Inputs
5
6
EMC Emission Levels
7
Wire Size
#18…#10 AWG
Tightening Torque
6.2 lb•in
0.7 N•m
Wire Strip Length
0.35 in. (9 mm)
Disconnect Lock Out
Maximum of 5/16 in. (8 mm) lock shackle or hasp. The hasp should
not exceed 5/16 in. (8 mm) when closed, or damage will occur to
disconnect guard.
Conducted Radio Frequency Emissions
10V rms Communication cables
10V rms (PE)
150 KHz…80 MHz
Radiated Emissions
Class A
Electrostatic Discharge
4 kV contact and 8 kV Air
Radio Frequency Electromagnetic Field
10V/m, 80 KHz…1 GHz
3V/m, 1.4 GHz…2.0 GHz
1V/m, 2.0 GHz…2.7 GHz
Fast Transient
2 kV (Power)
2 kV (PE)
1 kV (Communications and control)
EMC Immunity Levels
8
1.0…4.0 mm2
1 kV (12)
Surge Transient
L-L,
2 kV (2)
L-N
(earth)
280_-___-10A-*
9
Overload Current Range
1.1…5.5 A
10, 15, 20
Trip Rating
120% of FLC setting
Number of poles
3
UL 508; CSA C22.2, No. 14; EN/IEC 60947-4; EN/IEC 60947-4-1; CE
Marked per Low Voltage 2006/95/EC; EMC Directive 2004/108/EC;
CCC; ODVA for EtherNet/IP; ODVA for DeviceNet
Certifications
cULus (File No. E3125, Guides NLDX, NLDX7)
‡ Used when caustic chemicals are used in food and beverage applications. The wash down rating is 1000 psi.
12
13
www.ab.com/catalogs
4-12
3.2…16 A
Trip Classes
Standards Compliance
11
0.5…2.5 A
280_-___-10C-*
280_-___-10D-*
Overload Rating
10
0.24…1.2 A
280_-___-10B-*
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Specifications
ArmorPoint and DeviceNet Versions - Control and I/O Power Requirements
Units
W/O HOA
W/ HOA
Control Voltage
Volts
24V DC
120V AC
240V AC
24V DC
120V AC
240V AC
Contactor (Pick Up)
Amps
0.71
0.583
0.292
0.71
0.583
0.292
Contactor (Hold In)
Amps
0.063
0.075
0.038
0.063
0.075
0.038
Total Control Power (Pick Up)
VA (W)
(17 W)
70
70
(21 W)
83
84
Total Control Power (Hold In)
VA (W)
(1.50 W)
9
9
(5.58 W)
22
23
0
1
External Devices powered by Control Voltage
Outputs (2) (1 A max. each)
Amps
2
2
2
2
2
2
Total Control (Pick Up) with max outputs
VA (W)
(65 W)
310
550
(73 W)
336
579
Total Control (Hold In) with max outputs
VA (W)
(50 W)
249
489
(58 W)
275
518
UL/NEMA
Rated Operation Voltage
24V DC
Input On-State Voltage Range
10…26V DC
3
3.0 mA @ 10V DC
Input On-State Current
7.2 mA @ 24V DC
Input Off-State Voltage Range
0…5V DC
Input Off-State Current
<1.5 mA
Input Filter — Software Selectable
Input Ratings
Off to On
Settable from 0…64 ms in 1 ms increments
On to Off
Settable from 0…64 ms in 1 ms increments
Input Compatibility
N/A
4
IEC 1+
Number of Inputs
4
5
Sensor Source
Voltage Status Only
11…25V DC from DeviceNet
Current Available
Output Ratings (Sourced from Control Circuit)
DeviceNet Specifications
DeviceNet Communications
ArmorPoint Ratings
2
IEC
50 mA max. per input, 200 mA total
Rated Operation Voltage
240V AC/30V DC
Rate Insulation Voltage
250V
250V
Dielectric Withstand
1500V AC
2000V AC
Operating Frequency
50/60 Hz
Type of Control Circuit
240V AC/30V DC
6
50/60 Hz
Electromechanical relay
Type of Current
AC/DC
Conventional Thermal Current Ith
Total of both outputs ≤ 2 A
Type of Contacts
Normally open (N.O.)
Number of Contacts
2
DeviceNet Supply Voltage Rating
Range 11…25V DC, 24V DC nominal
DeviceNet Input Current
167 mA @ 24V DC - 4.0 W
DeviceNet Input Current
364 mA @ 11V DC - 4.0 W
External Devices powered by
DeviceNet
Sensors inputs 4 x 50 mA - total 200 mA
Total w/max Sensor Inputs (4)
367 mA @ 24V DC - 8.8 W
DeviceNet Input Current Surge
15 A for 250 μs
Baud Rates
125, 250, 500 kbps
Distance Maximum
500 m (1630 ft) @ 125 kbps
Distance Maximum
200 m (656 ft) @ 250 kbps
Distance Maximum
100 m (328 ft) @ 500 kbps
Backplane Current Load
400 mA
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-13
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Specifications
EtherNet/IP Version - Control and I/O Power Requirements
A1/A21
0
Units
1
A1/A21
A3/A2
A3/A2
W/O HOA
A3/A2‡
W/ HOA
Control Voltage
Volts
Module Inrush
Amps
0.92
0.30
24V DC
1.09
0.125
0.295
Module Steady
Amps
0.06
0.30
0.23
0.125
0.295
Total Control Power (Pick Up)
Watts
22.08
7.20
26.16
3.00
7.08
Total Control Power (Running)
Watts
1.44
7.20
5.52
3.00
7.08
1 Add power requirements for outputs (1 A max.) to A1/A2.
2
Add power requirements for inputs (200 mA max.) to A3/A2.
‡ If A1 power is disconnected.
UL/NEMA
IEC
Rated Operation Voltage
24V DC
Input On-State Voltage Range
3
10…26V DC
3.0 mA @ 10V DC
Input On-State Current
7.2 mA @ 24V DC
Input Off-State Voltage Range
0…5V DC
Input Off-State Current
4
Input Ratings
Sourced from control circuit - A3/A2
<1.5 mA
Input Filter — Software Selectable
Off to On
Settable from 0…64 ms in 1 ms increments
On to Off
Settable from 0…64 ms in 1 ms increments
Input Compatibility
N/A
IEC 1+
Number of Inputs
4
Sensor Source
5
Voltage Status Only
11…26.4V DC from DeviceNet
Current Available
50 mA max. per input, 200 mA total
Rated Operation Voltage
26.4V DC
Rate Insulation Voltage
250V
Dielectric Withstand
6
7
1500V AC (UL)
Type of Control Circuit
Output Ratings
Sourced from Control Circuit - A1/A2
8
2000V AC (IEC)
Solid state sourcing output
Type of Current
24V DC
Conventional Thermal Current Ith
0.5 A each, 1 A max. combined
Type of Contacts
Normally open (N.O.)
Number of Contacts
2
Load Types
Resistive or light inductive
Surge Suppression
Integrated diode, clamps @ 35V DC
Thermo-Protection
Integrated short circuit and over current protection
Maximum Cycle Rate
30 operations/minute capacitive and inductive loads
Maximum Blocking Voltage
35V DC
Maximum On-State Voltage @
Maximum Output
1.5V DC
10 μA
Maximum Off-State Leakage Current
Beacon-based performance including IEEE 1588 end to end transparent clock
9
10
Device Level Ring (DLR)
EtherNet Port
Maximum Nodes
50
Fault Recovery
Ring recovery time is less than 3 ms for a 50 node network
EtherNet Receptacles
2 D-coded, 4-pin female M12 connecters
Ports
Embedded switch with 2 ports
IP Address
DHCP enabled by default
DHCP Timeout
30 seconds
Communication Rate
10/100 Mbs with auto negotiate half duplex and full duplex
Transported over both TCP and UDP
Min. of 500 I/O packets/second (pps)
Supports up to 150 concurrent TCP sockets
Data
Embedded web server
11
Web Server
Security
Login and password configurable
E-mail
Support Simple Mail Transfer Protocol (SMTP)
Configuration
Status, diagnostics, and configuration tabs
Supports scheduled (Class 1) and unscheduled (Class 3 & UCMM) connections
12
6 - Class 3 connections are supported simultaneously
Minimum of 1 - Class 1 or maximum of 2 - Class 1, CIP connections (1 exclusive
owner, 1 input only and 1 listen only) are supported
Device Connections
Class 1 Connection API: 2…3200 ms, Class 3 Connection API: 100…10 000 ms
20 ms Request Packet Interval (RPI) default
13
3 concurrent Encapsulation sessions
TCP port supports 5 concurrent incoming connections
www.ab.com/catalogs
4-14
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Specifications
Motor Overload Trip Curves
Motor overload current parameter provides class 10,15, and 20 overload protection. Ambient insensitivity is inherent in the electronic design
of the overload.
0
Class 10
Approximate Trip Time [s]
1
2
Cold
Hot
3
4
% Full Load Current
5
Approximate Trip Time [s]
Class 15
6
Cold
Hot
7
8
% Full Load Current
9
Class 20
Approximate Trip Time [s]
10
Cold
Hot
11
12
% Full Load Current
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-15
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for IP67/NEMA Type 4 with Conduit Entrance
351
[13.82 ]
290
[11.42 ]
189
[7]
1
2
268
[10.55]
287,5
[11.32 ]
3
6,8
[.27 ]
150
[6 ]
3,02
[ .12 ]
MOTOR CONNECTION 185 [7.3] M22 CORDSET
MOTOR CONN ECTION 243 [9.57] M35 CORDSET
4
373
[14.69 ]
11
[ .43 ]
5
195
[7.68 ]
6
67,9
[3]
1 in. CONDUIT OPENING
39
[2]
7
47
[1.85 ]
0.75 in. CONDUIT OPENING
8
9
10
11
12
13
www.ab.com/catalogs
4-16
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for IP67/NEMA Type 4 with ArmorConnect Connectivity
351
[13.82]
290
[11.42]
351
[13.82]
290
[11.42]
1
2
268
[10.55 ]
268
287,5
[10.55] [11.32 ]
287,5
[11.32]
3
203.2
[8]
CABLE
KEEP OUT
203.2
[8]
CABLE
KEEP OUT
6,8
[.27 ]
6,8
[.27 ]
4
5
6
77,6
[3]
77,6
[3 ]
60,6
[2 ]
25,5
[1 ]
7
60,6
[2 ]
68
[2.68 ]
25,5
[1 ]
68
[2.68 ]
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-17
Bulletin 280/281
ArmorStart® Distributed Motor Controller
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for NEMA Type 4X with Conduit Entrance
1
2
3
4
5
MOTOR CONNECTION 185 [7.3] M22 CORDSET
MOTOR CONNECTION 243 [9.57] M35 CORDSET
6
7
8
1 in. CONDUIT OPENING
9
0.75 in. CONDUIT OPENING
10
11
12
13
www.ab.com/catalogs
4-18
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281
ArmorStart Distributed Motor Controller
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for NEMA Type 4X with ArmorConnect Connectivity
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-19
Bulletin 283
ArmorStart® Distributed Motor Controller
Product Overview
Table of Contents
Bulletin 283 ArmorStart Distributed Motor Controller
On-Machine starting solution
Solid-state motor control
Horsepower range 0.5…10 Hp (0.37…5.5 kW)
Robust IP67/NEMA Type 4 or NEMA Type 4X enclosure rating
Quick disconnect connections for I/O, communications, motor, threephase and control power
Gland plate entry: conduit entrance or ArmorConnect power media
Four inputs and two outputs (expandable with ArmorPoint)
LED status indication
EtherNet/IP, DeviceNet, or ControlNet communications
Local logic technology using DeviceLogix
Connectivity to ArmorPoint distributed I/O products
Peer-to-peer communication (ZIP)
Factory installed options:
- Hand/Off/Auto (HOA) keypad configuration
- Source brake contactor
- Safety monitor
0
1
2
3
Product Selection ...... 4-22
Options .......................... 4-24
Accessories.................. 4-79
Specifications.............. 4-25
Approximate
Dimensions................... 4-30
Standards Compliance
UL 508
CSA C22.2, No. 14
EN/IEC 60947
EN/IEC 60947-1
CE Marked per Low Voltage
Directive 2006/95/EC and EMC
Directive 2004/108/EC
CCC
ODVA for DeviceNet
Certifications
cULus (File No. E96956,
Guides NMFT, NMFT7)
4
5
Mode of Operation
Soft Start
Selectable Kick Start
This method has the most general application. The motor is raised
from an initial torque value to full voltage. This initial torque is
adjustable to 15, 25, 35, or 65% of locked rotor torque. The motor
voltage is gradually increased during the acceleration ramp time,
which can be adjusted from 1…45 s.
A kickstart, or boost, at the beginning of the start mode is intended
to provide a current pulse of 450% of the full load current. The
kickstart time is adjustable from 0.5…1.5 s. This allows the motor to
develop additional torque at startup for loads which may need an
initial boost.
6
Kickstart
(when selected)
Percent
Voltage
Percent
Voltage
Initial
Torque
7
Initial
Torque
Run
Start
9
10
11
Start
Time [s]
8
Run
Time [s]
Current Limit Start
Soft Stop
This starting mode is used when it is necessary to limit the
maximum starting current. It can be adjusted for 150…450% of full
load amps. Start times are selectable from 1…45 s.
The Soft Stop function can be used with applications that require an
extended coast to rest. When enabled, the voltage ramp-down time
can be selected from 1…90 s. The motor will stop when the motor
voltage drops to a point where the load torque is greater than the
motor torque.
Percent
Full
Load
Current
Motor
Speed
Start
Start
Time [s]
Time [s]
12
13
www.ab.com/catalogs
4-20
Run
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Coast
Soft Stop
Bulletin 283
ArmorStart Distributed Motor Controller
®
Product Overview/Factory Installed Options
Overload Protection
The Bulletin 283 ArmorStart Distributed Motor Controller
incorporates, as standard, electronic motor overload protection. This
overload protection is accomplished electronically with an I2t
algorithm. The ArmorStart’s overload protection is programmable via
the communication network providing the user with flexibility. The
overload trip class allows for Class 10 overload protection. Ambient
insensitivity is inherent in the electronic design of the overload.
0
1
Fault Diagnostics
Fault diagnostics capabilities built into the Bulletin 283 ArmorStart
Distributed Motor Controller help you pinpoint a problem for easy
troubleshooting and quick re-starting.
Short Circuit
Overload
Phase Loss
Shorted SCR
Phase Rotation
Control Power Loss
Control Power Fuse
Detection
DeviceNet Power Loss
Output Fuse Detection
2
I/O Fault
Brake Fuse Detection
Overtemperature
Phase Imbalance
Internal Communication Fault
Heatsink Temperature Fault
EEPROM Fault
Hardware Fault
3
4
5
Factory-Installed Options
HOA Selector Keypad
6
The HOA Selector Keypad allows for local start/stop control.
Source Brake Contactor
An internal contactor is used to switch the electromechanical motor
brake On/Off. The motor brake is powered from the main power
circuit. A customer-accessible 3.0 A fuse is provided to protect the
brake cable. Included is a 3-meter 3-pin cordset for connection to
the motor brake, as standard.
7
Safety Monitor
8
The Safety Monitor Option allows for independent monitoring of the
output status of the device. The function is implemented using a
normally closed contact which complies with IEC 60947-5-1 for
mechanically linked contacts. Two terminal blocks are provided as
the inputs which maybe used with an external safety circuit. The
external safety circuit monitors the status of the isolation contactor.
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-21
Bulletin 283
ArmorStart® Distributed Motor Controller
Catalog Number Explanation/Product Selection
Catalog Number Explanation
0
Examples given in this section are for reference purposes. This basic explanation should not be used for product selection; not all
combinations will produce a valid catalog number.
283
a
1
2
D – F
B
b
d
c
19Z – 25
e
D – CR – Option 1 – Option 2 – Option 3
f
g
f
i
Option 1
Description
283
Solid-State Starter
Code
Description
10
10 A Rated Device
25
25 A Rated Device
D
DeviceNet
A
ArmorPoint
F
Type 4 (IP67)
S
Type 4X
6
8
Source Brake Contactor
SB
W1
No cable
B
3.0…5.5 A
k
C
5.3…7.6 A
Option 3
D
6.3…16.0 A
Code
Description
SM
Safety Monitor
h
Control and 3-Phase Power Connections/Motor Cable Connection
(CR: Conduit/Round Media) or (RR: Round/Round Media)
Description
Code
200…460V AC, 3-Phase, 50/60 Hz
200…575V AC, 3-Phase, 50/60 Hz
e
Controller Size/Control Voltage§
7
Description
blank
1.1…3.0 A
Description
C
Code
SB
Description
Input Line Voltage
B
j
Option 2
A
d
Code
Hand/Off/Auto Selector Keypad
Code
c
Description
Description
3
Overload Selection Current Range
Enclosure Type
Code
Code
g
Description
5
k
Short Circuit Protection
(Motor Circuit Protector)
Communications
4
j
a
Code
Code
i
Bulletin Number
b
3
h
24V DC
120V AC
240V AC
3Z
3D
3B
9Z
9D
9B
16Z
16D
16B
19Z
19D
19B
Control Power
3-Phase Power
Motor Cable
Conduit Entrance
3 m, unshielded cordset
male 90°
CR
blank
Conduit Entrance
CR
W1
Conduit Entrance
Conduit Entrance
No cable
RR
blank
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
3 m, unshielded cordset
male 90°
RR
W1
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
No cable
1 See Accessories on page 4-82 for extended motor and source brake cable lengths.
Not available with round media option (RR).
§ See Product Selection tables for additional information.
Product Selection
DeviceNet Network Communication
9
IP67/NEMA Type 4 with conduit entrance, Up to 480V AC
kW
10
11
13
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
380/ 400/
415V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.37
1.1
0.5
0.5
1.5
283D-FB3Z-10A-CR
283D-FB3D-10A-CR
283D-FB3B-10A-CR
3.0…5.5
1.5
2.2
1
1
3
283D-FB9Z-10B-CR
283D-FB9D-10B-CR
283D-FB9B-10B-CR
5.3…7.6
3
3
1.5
2
5
283D-FB16Z-10C-CR 283D-FB16D-10C-CR 283D-FB16B-10C-CR
6.3…16
4
5.5
3
5
10
283D-FB19Z-25D-CR 283D-FB19D-25D-CR 283D-FB19B-25D-CR
NEMA Type 4X with conduit entrance, Up to 480V AC
kW
12
24V DC Control
Voltage
Hp
24V DC Control
Voltage
Hp
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
380/ 400/
415V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
283D-SB3Z-10A-CR
283D-SB3D-10A-CR
283D-SB3B-10A-CR
283D-SB9D-10B-CR
283D-SB9B-10B-CR
3.0…5.5
1.1
2.2
1
1
3
283D-SB9Z-10B-CR
5.3…7.6
1.5
3
1.5
2
5
283D-SB16Z-10C-CR 283D-SB16D-10C-CR 283D-SB16B-10C-CR
6.3…16
4
5.5
3
5
10
283D-SB19Z-25D-CR 283D-SB19D-25D-CR 283D-SB19B-25D-CR
www.ab.com/catalogs
4-22
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 283
ArmorStart Distributed Motor Controller
®
Product Selection
DeviceNet Network Communication, Continued
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Up to 480V AC
kW
24V DC Control
Voltage
Hp
0
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
380/ 400/
415V AC
50 Hz
1.1…3.0
0.55
1.1
3.0…5.5
1.1
2.2
1
1
3
283D-FB9Z-10B-RR
5.3…7.6
1.5
3
1.5
2
5
283D-FB16Z-25C-RR 283D-FB16D-10C-RR 283D-FB16B-10C-RR
6.3…16
4
5.5
3
5
10
283D-FB19Z-25D-RR 283D-FB19D-25D-RR 283D-FB19B-25D-RR
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
0.5
0.5
1.5
283D-FB3Z-10A-RR
283D-FB3D-10A-RR
283D-FB3B-10A-RR
283D-FB9D-10B-RR
283D-FB9B-10B-RR
1
2
NEMA Type 4X with quick disconnects for ArmorConnect power media, Up to 480V AC
kW
24V DC Control
Voltage
Hp
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
380/ 400/
415V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
283D-SB3Z-10A-RR
283D-SB3D-10A-RR
283D-SB3B-10A-RR
283D-SB9D-10B-RR
283D-SB9B-10B-RR
3.0…5.5
1.1
2.2
1
1
3
283D-SB9Z-10B-RR
5.3…7.6
1.5
3
1.5
2
5
283D-SB16Z-10C-RR 283D-SB16D-10C-RR 283D-SB16B-10C-RR
6.3…16
4
5.5
3
5
10
283D-SB19Z-25D-RR 283D-SB19D-25D-RR 283D-SB19B-25D-RR
IP67/NEMA Type 4 with conduit entrance, Up to 575V AC
kW
24V DC Control
Voltage
Hp
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
2
283D-FC3Z-10A-CR
283D-FC3D-10A-CR
283D-FC3B-10A-CR
283D-FC9D-10B-CR
283D-FC9B-10B-CR
3.0…5.5
1.1
2.2
1
1
3
3
283D-FC9Z-10B-CR
5.3…7.6
1.5
3
1.5
2
5
5
283D-FC16Z-10C-CR 283D-FC16D-10C-CR 283D-FC16B-10C-CR
6.3…16
4
5.5
3
5
10
10
283D-FC19Z-25D-CR 283D-FC19D-25D-CR 283D-FC19B-25D-CR
kW
Hp
4
5
6
7
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Up to 575V AC
24V DC Control
Voltage
3
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
2
283D-FC3Z-10A-RR
283D-FC3D-10A-RR
283D-FC3B-10A-RR
3.0…5.5
1.1
2.2
1
1
3
3
283D-FC9Z-10B-RR
283D-FC9D-10B-RR
283D-FC9B-10B-RR
5.3…7.6
1.5
3
1.5
2
5
5
283D-FC16Z-10C-RR 283D-FC16D-10C-RR 283D-FC16B-10C-RR
6.3…16
4
5.5
3
5
10
10
283D-FC19Z-25D-RR 283D-FC19D-25D-RR 283D-FC19B-25D-RR
8
9
NEMA Type 4X with conduit entrance, Up to 575V AC
kW
Hp
24V DC Control
Voltage
120V AC Control
Voltage
240V AC Control
Voltage
Cat. No.
Cat. No.
Cat. No.
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
1.1…3.0
0.55
1.1
0.5
0.5
1.5
2
283D-SC3Z-10A-CR
283D-SC3D-10A-CR
283D-SC3B-10A-CR
3.0…5.5
1.1
2.2
1
1
3
3
283D-SC9Z-10B-CR
283D-SC9D-10B-CR
283D-SC9B-10B-CR
5.3…7.6
1.5
3
1.5
2
5
5
283D-SC16Z-10C-CR 283D-SC16D-10C-CR 283D-SC16B-10C-CR
6.3…16
4
5.5
3
5
10
10
283D-SC19Z-25D-CR 283D-SC19D-25D-CR 283D-SC19B-25D-CR
10
11
NEMA Type 4X with quick disconnects for ArmorConnect power media, Up to 575V AC
kW
24V DC Control
Voltage
Hp
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
2
283D-SC3Z-10A-RR
283D-SC3D-10A-RR
283D-SC3B-10A-RR
283D-SC9D-10B-RR
283D-SC9B-10B-RR
3.0…5.5
1.1
2.2
1
1
3
3
283D-SC9Z-10B-RR
5.3…7.6
1.5
3
1.5
2
5
5
283D-SC16Z-10C-RR 283D-SC16D-10C-RR 283D-SC16B-10C-RR
6.3…16
4
5.5
3
5
10
10
283D-SC19Z-25D-RR 283D-SC19D-25D-RR 283D-SC19B-25D-RR
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-23
12
13
Bulletin 283
ArmorStart® Distributed Motor Controller
Product Selection
ArmorPoint Bus Network Communication
0
IP67/NEMA Type 4 with conduit entrance, Up to 480V AC
kW
1
2
24V DC Control
Voltage
Hp
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
380/ 400/
415V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.37
1.1
0.5
0.5
1.5
283A-FB3Z-10A-CR
283A-FB3D-10A-CR
283A-FB3B-10A-CR
3.0…5.5
1.5
2.2
1
1
3
283A-FB9Z-10B-CR
283A-FB9D-10B-CR
283A-FB9B-10B-CR
5.3…7.6
3
3
1.5
2
5
283A-FB16Z-10C-CR 283A-FB16D-10C-CR 283A-FB16B-10C-CR
6.3…16
4
5.5
3
5
10
283A-FB19Z-25D-CR 283A-FB19D-25D-CR 283A-FB19B-25D-CR
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Up to 480V AC
3
4
5
kW
7
9
10
380/ 400/
415V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
283A-FB3Z-10A-RR
283A-FB3D-10A-RR
283A-FB3B-10A-RR
3.0…5.5
1.1
2.2
1
1
3
283A-FB9Z-10B-RR
283A-FB9D-10B-RR
283A-FB9B-10B-RR
5.3…7.6
1.5
3
1.5
2
5
283A-FB16Z-10C-RR 283A-FB16D-10C-RR 283A-FB16B-10C-RR
6.3…16
4
5.5
3
5
10
283A-FB19Z-25D-RR 283A-FB19D-25D-RR 283A-FB19B-25D-RR
IP67/NEMA Type 4 with conduit entrance, Up to 575V AC
24V DC Control
Voltage
Hp
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
2
283A-FC3Z-10A-CR
283A-FC3D-10A-CR
283A-FC3B-10A-CR
283A-FC9D-10B-CR
283A-FC9B-10B-CR
3.0…5.5
1.1
2.2
1
1
3
3
283A-FC9Z-10B-CR
5.3…7.6
1.5
3
1.5
2
5
5
283A-FC16Z-10C-CR 283A-FC16B-10C-CR 283A-FC16B-10C-CR
6.3…16
4
5.5
3
5
10
10
283A-FC19Z-25D-CR 283A-FC19D-25D-CR 283A-FC19B-25D-CR
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Up to 575V AC
24V DC Control
Voltage
Hp
120V AC Control
Voltage
240V AC Control
Voltage
Current
Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
Cat. No.
Cat. No.
Cat. No.
1.1…3.0
0.55
1.1
0.5
0.5
1.5
2
283A-FC3Z-10A-RR
283A-FC3D-10A-RR
283A-FC3B-10A-RR
283A-FC9D-10B-RR
283A-FC9B-10B-RR
3.0…5.5
1.1
2.2
1
1
3
3
283A-FC9Z-10B-RR
5.3…7.6
1.5
3
1.5
2
5
5
283A-FC16Z-10C-RR 283A-FC16B-10C-RR 283A-FC16B-10C-RR
6.3…16
4
5.5
3
5
10
10
283A-FC19Z-25D-RR 283A-FC19D-25D-RR 283A-FC19B-25D-RR
Options – Factory Installed
Description
11
Hand/Off/Auto Selector Keypad
Supplied ArmorStart without motor cable
12
Supplied ArmorStart with source brake cable
-3
-CRW
-SB
Supplied ArmorStart without source brake cable
-SBW
ArmorConnect Power Media Connectivity, ArmorStart supplied without motor cable
-RRW
Not available with round media option (RR).
www.ab.com/catalogs
4-24
Cat. No. Modification
-SM
Safety Monitor
13
240V AC Control
Voltage
230V AC
50 Hz
kW
8
120V AC Control
Voltage
Current
Rating [A]
kW
6
24V DC Control
Voltage
Hp
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 283
ArmorStart Distributed Motor Controller
®
Specifications
Connections
0
Bulletin 283D ArmorStart with DeviceNet Communications
Local
Disconnect
1
LED Status
Indication
HOA
(optional)
2 Outputs
(Micro/M12)
2
Source Brake
Connector
(optional)
4 Inputs
(Micro/M12)
DeviceNet
Connection
(Mini/M18)
3
Motor
Connection
4
Ground
Terminal
5
Bulletin 283A ArmorStart for the ArmorPoint Backplane
Local
Disconnect
2 Outputs
(Micro/M12)
LED Status
Indication
6
HOA
(optional)
7
Source Brake
Connector
(optional)
ArmorPoint
Interface (IN)
8
Motor
Connection
ArmorPoint
Interface (OUT)
9
Ground
Terminal
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-25
Bulletin 283
ArmorStart® Distributed Motor Controller
Specifications
ArmorStart Receptacle Pin Outs
0
Receptacle Connections for ArmorPoint Interface (OUT)
Pin
Pin
Pin
Pin
Pin
Pin
Pin
1
1:
2:
3:
4:
5:
7:
8:
Receptacle Connections for Incoming Control Power
CAN high
Common
+5V
CAN low
Enable out
Common
NC (no connection)
Pin
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
6:
Unswitched (A3)(red)
Common (A2)(black)
PE (green)
Not used (blank)
Switched (A1)(blue)
Not used (white)
2
Receptacle Connections for ArmorPoint Interface (IN)
Receptacle Connections for Source Brake
3
Pin
Pin
Pin
Pin
Pin
Pin
Pin
4
1:
2:
3:
4:
5:
7:
8:
CAN high
Common
+5V
CAN low
Enable out
Common
PE
Pin 1: L1 (black)
Pin 2: GND (green/yellow)
Pin 3: L2 (white)
5
Receptacle Connections for DeviceNet Connector
6
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
Receptacle Connections for Motor Connector 5 Hp or less (M22)
Drain (no connection)
+VDNET
-VDNET
CAN_H
CAN_L
Pin
Pin
Pin
Pin
7
8
Receptacle Connections for Input (M12)
Pin
Pin
Pin
Pin
Pin
9
1:
2:
3:
4:
5:
+24V (A3 or DNET)
Input 0
Common
Input 1
NC (no connection)
Pin
Pin
Pin
Pin
Receptacle Connections for Output, DeviceNet or
ArmorPoint Version (M12)
Pin 1: PE
Pin 2: Return
Pin 3: Relay out
12
13
www.ab.com/catalogs
4-26
T1 (black)
T2 (white)
T3 (red)
Ground (green/yellow)
Receptacle Connections for Motor Connector 10 Hp (M35)
10
11
1:
2:
3:
4:
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
1:
2:
3:
4:
T1 (black)
Ground (green/yellow)
T3 (red)
T2 (white)
Bulletin 283
ArmorStart Distributed Motor Controller
®
Specifications
ArmorStart Receptacle Pin Outs, Continued
Receptacle Connections for Incoming 3-phase Power 25 A Short Circuit Protection (M35)
Receptacle Connections for Incoming 3-phase Power 10 A Short Circuit Protection (M22)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
Pin
Pin
Pin
Pin
L1 (black)
L2 (white)
L3 (red)
Ground (green/yellow)
1:
2:
3:
4:
0
1
L1 (black)
Ground (green/yellow)
L3 (red)
L2 (white)
2
3
4
Motor Overload Trip Curves
Motor overload current parameter provides class 10 overload protection. Ambient insensitivity is inherent in the electronic design of the
overload.
5
Class 10
Approximate Trip Time [s]
6
7
Cold
Hot
8
9
% Full Load Current
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-27
Bulletin 283
ArmorStart® Distributed Motor Controller
Specifications
Electrical Ratings
0
1
Power Circuit
UL/NEMA
IEC
Rated Operation Voltage
200…575Y
200…575V
500V
Rate Insulation Voltage
600V
Rated Impulsed Voltage
6 kV
6 kV
Dielectric Withstand
2200V AC
2500V AC
Operating Frequency
50/60 Hz
50/60 Hz
Utilization Category
N/A
AC-3
Protection Against Shock
N/A
Rated Operating Current Max.
2
IP2X
280_-___-10A-*
3.0 A
280_-___-10B-*
5.5 A
280_-___-10C-*
7.6 A
280_-___-10D-*
16 A
24V DC (+10%, -15%) A2 (should be grounded at voltage source)
Rated Operation Voltage
3
120V AC (+10%, -15%) A2 (should be grounded at voltage source)
240V AC (+10%, -15%) A2 (should be grounded at voltage source)
Control Circuit
4
Rated Insulation Voltage
250V
Rated Impulsed Voltage
—
250V
4 kV
Dielectric Withstand
1500V AC
2000V AC
Overvoltage Category
—
III
Operating Frequency
50/60 Hz
Current Rating
Voltage
480Y/277V
480Y/480V
600Y/347V
600V
Sym. Amps
RMS
65 kA
65 kA
30 kA
30 kA
30 kA
30 kA
30 kA
30 kA
1.1…3.0 A
5
SCPD Performance Type 1
Short Circuit
Protection
3.0…5.5 A
5.3…7.6 A
6.3…16 A
SCPD List
Size per NFPA 70 (NEC) or NFPA 79 for Group Motor Applications
Power Requirements
6
Units
Control Voltage (Nom)
Volts
24V DC
120V AC
240V AC
Power supply (Nom)
Amps
0.170
0.110
0.060
Total Control Power (Starting/Stopping)
VA (W)
(90 W)
35
35
Total Control Power (Running)
VA (W)
(8 W)
28
28
7
8
External Devices powered by Control Voltage
Outputs (2) (1 A max. each)
Amps
2
2
2
Total Control (Pick Up) with max outputs
VA (W)
(138 W)
275
515
VA (W)
(56 W)
268
508
Total Control (Hold In) with max outputs
Rated Operation Voltage
24V DC
Rated Insulation Voltage
1500V AC
Input On-State Voltage Range
10…26V DC
3.0 mA @ 10V DC
Input On-State Current
9
7.2 mA @ 24V DC
Input Off-State Voltage Range
0…5V DC
Input Off-State Current
<1.5 mA
Input Filter — Software Selectable
Input Ratings
10
Off to On
Settable from 0…64 ms in 1 ms increments
On to Off
Settable from 0…64 ms in 1 ms increments
Input Compatibility
N/A
IEC 1+
Number of Inputs
4
Sensor Source
11
12
Output Ratings (Sourced from Control Circuit)
13
Voltage Status Only
11…25V DC from DeviceNet
Current Available
50 mA max. per input, 200 mA total
Rated Operation Voltage
250V AC/30V DC
Rated Insulation Voltage
250V
250V
Dielectric Withstand
1500V AC
2000V AC
Operating Frequency
50/60 Hz
Type of Control Circuit
50/60 Hz
Electromechanical relay
Type of Current
AC/DC
Conventional Thermal Current Ith
Total of both outputs ≤ 2 A
Type of Contacts
Normally open (N.O.)
Number of Contacts
2
www.ab.com/catalogs
4-28
250V AC/30V DC
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 283
ArmorStart Distributed Motor Controller
®
Specifications
UL/NEMA
Environmental
IEC
Operating Temperature Range
-20…+40 °C (-4…+104 °F)
Storage and Transportation
temperature range
–25….+85 °C (–13…+185 °F)
Altitude
2000 m
Humidity
5…95% (non-condensing)
Pollution Degree
0
3
Enclosure Ratings
NEMA 4/12/13
Enclosure Ratings
NEMA 4X
1
IP67
IP69K
Approximate Shipping Weight
16.8 kg (37 lb)
Resistance to Shock
Operational
15 G
Non-Operational
30 G
2
Resistance to Vibration
Operational
1 G, 0.15 mm (0.006 in.) displacement
Non-Operational
2.5 G, 0.38 mm (0.015 in.) displacement
3
Power and Ground Terminals
Wire Size
Primary/Secondary terminal:
(#16 …#10 AWG)
Primary/Secondary terminal:
1.5…4.0 mm2
Tightening Torque
Primary terminal:
10.8 lb•in
Secondary terminal:
4.5 lb•in
Primary terminal:
(1.2 N•m)
Secondary terminal:
(0.5 N•m)
Mechanical
Wire Strip Length
4
0.35 in. (9 mm)
Control and Safety Monitor Inputs
Wire Size
(18…10 AWG)
Tightening Torque
6.2 lb•in
1.0…4.0 mm2
5
0.7 N•m
Wire Strip Length
0.35 in. (9 mm)
Disconnect Lock Out
Maximum of 5/16 in. (8 mm) lock shackle or hasp. The hasp should not exceed
5/16 in. (8 mm) when closed, or damage will occur to disconnect guard.
6
EMC Emission Levels
Conducted Radio Frequency Emissions
Class A
Radiated Emissions
Class A
EMC Immunity Levels
Electrostatic Discharge
4 kV contact and 8 kV Air
Radio Frequency Electromagnetic Field
10V/m
Fast Transient
7
2 kV
1 kV (12)
Surge Transient
L-L,
2 kV (2)
L-N
(earth)
Overload Characteristics
8
1.1…3.0 A
3.0…5.5 A
Overload Current Range
5.3…7.6 A
6.3…16 A
Other Rating
Trip Class
10
Trip Rating
120% of FLC setting
Number of Poles
9
3
DeviceNet Specifications
DeviceNet Supply Voltage Rating
Range 11…25V DC, 24V DC nominal
10
167 mA @ 24V DC - 4.0 W
DeviceNet Input Current
364 mA @ 11V DC - 4.0 W
External Devices powered by DeviceNet
Sensors inputs 4 x 50 mA - total 200 mA
Total w/max Sensor Inputs (4)
367 mA @ 24V DC - 8.8 W
DeviceNet Input Current Surge
15 A for 250 μs
11
DeviceNet Communications
Baud Rates
125, 250, 500 kbps
500 m (1630 ft) @ 125 kbps
Distance Maximum
12
200 m (656 ft) @ 250 kbps
100 m (328 ft) @ 500 kbps
ArmorPoint Backplane Current Load
400 mA
UL 508; CSA C22.2, No. 14; EN/IEC 60947; EN/IEC 60947-1; CE Marked per Low
Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC; CCC; ODVA for
DeviceNet
Standards Compliance
Certifications
cULus (File No. E96956, Guides NMFT, NMFT7)
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-29
13
Bulletin 283
ArmorStart® Distributed Motor Controller
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for IP67/NEMA Type 4 with Conduit Entrance
1
2
3
4
MOTOR CONNECTION 274 [10.8] M22 CORDSET
MOTOR CONNECTION 330 [13] M35 CORDSET
5
6
7
8
1 in. CONDUIT OPENING
0.75 in. CONDUIT OPENING
9
10
11
12
13
www.ab.com/catalogs
4-30
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 283
ArmorStart Distributed Motor Controller
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for IP67/NEMA Type 4 with ArmorConnect Connectivity
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-31
Bulletin 283
ArmorStart® Distributed Motor Controller
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for NEMA Type 4X with Conduit Entrance
1
2
3
4
5
6
7
8
1 in. CONDUIT OPENING
0.75 in. CONDUIT OPENING
9
10
11
12
13
www.ab.com/catalogs
4-32
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 283
ArmorStart Distributed Motor Controller
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for NEMA Type 4X with ArmorConnect Connectivity
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-33
Bulletin 284
ArmorStart® Distributed Motor Controller
Product Overview
Bulletin 284 ArmorStart Distributed Motor Controller
0
Table of Contents
On-Machine starting solution
Variable frequency AC drive using PowerFlex® technology
Horsepower range 0.5…5 Hp (0.4…3.3 kW)
Robust IP67/NEMA Type 4 or NEMA Type 4X enclosure rating
Quick disconnect for I/O, communications, motor, three-phase, and
control power connections
LED status indication
EtherNet/IP, DeviceNet, and ControlNet communications
Local logic control via DeviceLogix
Peer-to-peer communications (ZIP) (not available with EtherNet/IP
communications)
Connectivity to ArmorPoint distributed I/O products
Factory installed options:
− EMI filter
− Control brake contactor
− Dynamic brake connector
− Source brake contactor
− Output contactor
− Shielded motor cable
− 0…10V analog input
− Safety monitor
− Hand/Off/Auto (HOA) with jog
1
2
3
Product Selection ...... 4-37
Options .......................... 4-42
Accessories.................. 4-79
Specifications.............. 4-46
Approximate
Dimensions................... 4-51
Standards Compliance
UL 508C
CSA C22.2, No. 14
EN/IEC 60947-4-2, EN 50178,
EN 61800-3
CE Marked per Low Voltage
Directive 2006/95/EC and EMC
Directive 2004/108/EC
CCC
ODVA for EtherNet/IP and
DeviceNet
Certifications
cULus (File No. E207834,
Guide NMMS, NMMS7)
4
Mode of Operation
5
Sensorless Vector Performance (SVP) - V/Hz
Sensorless Vector Control (SVC)
This method provides excellent speed regulation and high levels of
torque across the entire speed range of the drive, and improved
speed regulation even as loading increases. Basic control yields the
most cost-effective performance when sensorless vector control is
not required.
Sensorless vector control provides exceptional speed regulation and
very high levels of torque across the entire speed range of the drive.
Torque (Per-Unit)
6
Torque (Per-Unit)
3 Hp - High Speed
7
3 Hp - High Speed
Frequency (Hz)
8
The Autotune feature allows the Bulletin 284 (SVC) to adapt to
individual motor characteristics.
Frequency (Hz)
9
10
11
Timer, Counter, Basic Logic and StepLogic™ functions can
reduce hardware design costs and simplify control schemes.
Automatically provides auto boost (IR compensation) and slip
compensation.
Develops high torque over a wide speed range and adapts to
individual motor characteristics.
Overload Protection
Fault Diagnostics
The Bulletin 284 ArmorStart Distributed Motor Controller
incorporates, as standard, electronic motor overload protection. This
overload protection is accomplished electronically with an I2t
algorithm. The ArmorStart’s overload protection is programmable via
the communication network providing the user with flexibility. The
overload trip class allows for class 10 overload protection. Ambient
insensitivity is inherent in the electronic design of the overload.
Fault diagnostics capabilities built into the Bulletin 284 ArmorStart
Distributed Motor Controller help you pinpoint a problem for easy
troubleshooting and quick re-starting.
Short Circuit
Overtemperature
Overload
Output Fuse Protection
Phase Short
DeviceNet Power Loss
Ground Fault
Internal Communication Fault
Stall
DC Bus Fault
Control Power Loss
EEPROM Fault
Control Power Fuse Protection Hardware Fault
I/O Fault
Restart Retries
Overcurrent
Miscellaneous Fault
Brake Fuse Protection
12
Local Logic via DeviceLogix
13
Provides local control over the device’s discrete and network I/O.
DeviceLogix consists of function blocks, inputs, outputs, and actual
hardware data, including fault and status bits.
www.ab.com/catalogs
4-34
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Options
Factory-Installed Options
0
HOA Selector Keypad with Jog Function
The HOA Selector Keypad with Jog Function allows for local
start/stop control with capabilities to JOG and to Forward/Reverse
motor direction.
1
EMI Filter
The EMI Filter is required to be CE compliant. When selected, a
3–meter shielded 4–conductor motor cordset is provided as
standard. This is only available with sensorless vector control.
2
Control Brake Connector
An internal contactor is used to switch an electromechanical motor
brake On/Off. The motor brake is powered from the control power
circuit. The configuration of the R1 relay controls the function of the
brake. A customer accessible 3 A fuse is provided to protect the
brake cable. Included is a 3-meter 3-pin cordset for connection to
the motor brake as standard.
3
Source Brake Contactor
An internal contactor is used to switch an electromechanical motor
brake On/Off. The motor brake is powered from the line power
circuit. The configuration of the R1 relay controls the function of the
brake. A customer accessible 3 A fuse is provided to protect the
brake cable. Included is a 3-meter 3-pin cordset for connection to
the motor brake as standard.
4
5
Shielded Motor Cable
A 3-meter shielded 4-conductor cordset is provided instead of the
3-meter unshielded 4-conductor cordset, when the EMI Filter is
selected.
6
Dynamic Brake Connector
This includes a 3-meter, 3-pin cordset for connection to a IP20
dynamic brake module. See Accessories on page 4-84 for available
modules.
7
IP67 Dynamic Brake Connector
The IP67 Dynamic Brake Resistor design offers simplicity in wiring
and installation. The DB1 option must be selected in order to have
the quick disconnect connectivity. See accessories for available
IP67 Dynamic Brake Resistors.
8
Output Contactor
An internal contactor is sourced from control voltage to isolate the
load side of the VFD. Control voltage or the at-motor disconnect
controls the ON/OFF of the output contactor. A sequenced stop
involving the output contact cannot be performed.
9
Safety Monitor
The Safety Monitor Option allows for independent monitoring of the
output contactor status. The output contactor is provided as
standard with this option. The function is implemented using the
normally closed auxiliary contact which complies with
IEC 60947-5-1 for mechanically linked contacts. Two terminal
blocks are provided as inputs to an external device, such as a
safety circuit.
10
11
0…10V Analog Input Connector
This provides 0…10V analog input as an external frequency
command from the analog input or remote potentiometer. A 5-pin
micro receptacle is provided for connectivity. A shielded 5conductor cordset or patch cord is recommended.
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-35
Bulletin 284
ArmorStart® Distributed Motor Controller
Catalog Number Explanation/Product Selection — PowerFlex4
Sensorless Vector Performance (SVP), typical of Powerflex 4 Class Drive
0
Examples given in this section are for reference purposes. This basic explanation should not be used for product selection; not all
combinations will produce a valid catalog number.
284
1
2
a
D – F
H
D2P3
b
d
e
c
f
g
h
i
f
i
Control Voltage
Option 1
Code
Description
Code
Description
284
VFD Starter
Z
24V DC
D
120V AC
B
240V AC
Code
Description
g
D
DeviceNet
Short Circuit Protection
(Motor Circuit Protector)
A
ArmorPoint
c
4
Enclosure Type
Code
Description
3
Hand/Off/Auto Selector Keypad with Jog
Function
j
Option 2
Code
CB
blank
Description
Control Brake Contactor
Code
Description
CB
W1
No cable
10
10 A Rated Device
DB
blank
DB Brake Connector
25
25 A Rated Device
DB1 blank
Connectivity to IP67 DB Resistor
Code
Description
SB
blank
Source Brake Contactor
F
Type 4 (IP67)
SB
W1
No cable
S
Type 4X
5
k
d
Option 3
Torque Performance Mode
Code
Description
Code
Description
OC
Output Contactor
H
Volts per Hertz (Sensorless Vector
Performance)
SM
‡
Safety Monitor
6
e
h
Output Current
200…240V
8
k
a
Communications
7
j
Bulletin Number
b
3
D – 10 – CR – Option 1 – Option 2 – Option 3
Code
Description
B2P3
2.3 A, 0.4 kW,
0.5 Hp
Control and 3-Phase Power Connections / Motor Cable Connection
(CR: Conduit/Round Media) or (RR: Round/Round Media)
380…480V
Code
Description
D1P4
1.4 A, 0.4 kW,
0.5 Hp
B4P5
4.5 A, 0.75 kW,
1.0 Hp
D2P3
2.3 A, 0.75 kW,
1.0 Hp
CR
blank
B7P6
7.6 A, 1.5 kW,
2.0 Hp
D4P0
4.0 A, 1.5 kW,
2.0 Hp
CR
N
—
—
D6P0
6.0 A, 2.2 kW,
3.0 Hp
—
9
—
D7P6
7.6 A, 3.3 kW,
5.0 Hp
Description
Code
Control Power
3-Phase Power
Motor Cable
Conduit Entrance
Conduit Entrance
3 m, unshielded cordset
male 90°
Conduit Entrance
Conduit Entrance
3 m, shielded cordset male
90°
CR
W1
Conduit Entrance
Conduit Entrance
No cable
RR
blank
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
3 m, unshielded cordset
male 90°
RR
N
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
3 m, shielded cordset male
90°
RR
W1
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
No cable
1 See Accessories on page 4-82 for extended motor and brake cable lengths.
The output contactor is included with the Safety Monitor option.
‡ Not available with round media option (RR).
10
11
12
13
www.ab.com/catalogs
4-36
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Product Selection
DeviceNet Network Communication
0
IP67/NEMA Type 4 with conduit entrance, Volts per Hertz (SVP) torque performance, Up to 480V AC
Input Voltage
200...240V, 50/60 Hz
3-Phase
380...480V, 50/60 Hz
3-Phase
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
0.4
0.5
2.3
284D-FHB2P3Z-10-CR 284D-FHB2P3D-10-CR 284D-FHB2P3B-10-CR
0.75
1
4.5
284D-FHB4P5Z-10-CR 284D-FHB4P5D-10-CR 284D-FHB4P5B-10-CR
1.5
2
7.6
284D-FHB7P6Z-25-CR 284D-FHB7P6D-25-CR 284D-FHB7P6B-25-CR
0.4
0.5
1.4
284D-FHD1P4Z-10-CR 284D-FHD1P4D-10-CR 284D-FHD1P4B-10-CR
0.75
1
2.3
284D-FHD2P3Z-10-CR 284D-FHD2P3D-10-CR 284D-FHD2P3B-10-CR
1.5
2
4
284D-FHD4P0Z-10-CR 284D-FHD4P0D-10-CR 284D-FHD4P0B-10-CR
2.2
3
6
284D-FHD6P0Z-25-CR 284D-FHD6P0D-25-CR 284D-FHD6P0B-25-CR
3
5
7.6
284D-FHD7P6Z-25-CR 284D-FHD7P6D-25-CR 284D-FHD7P6B-25-CR
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Volts per Hertz (SVP) torque performance, Up
to 480V AC
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
200…240V, 50/60
Hz
3-Phase
0.4
0.5
2.3
284D-FHB2P3Z-10-RR 284D-FHB2P3D-10-RR 284D-FHB2P3B-10-RR
284D-FHB4P5Z-10-RR 284D-FHB4P5D-10-RR 284D-FHB4P5B-10-RR
380…480V, 50/60
Hz
3-Phase
0.75
1
4.5
1.5
2
7.6
284D-FHB7P6Z-25-RR 284D-FHB7P6D-25-RR 284D-FHB7P6B-25-RR
0.4
0.5
1.4
284D-FHD1P4Z-10-RR 284D-FHD1P4D-10-RR 284D-FHD1P4B-10-RR
0.75
1
2.3
284D-FHD2P3Z-10-RR 284D-FHD2P3D-10-RR 284D-FHD2P3B-10-RR
1.5
2
4
284D-FHD4P0Z-10-RR 284D-FHD4P0D-10-RR 284D-FHD4P0B-10-RR
2.2
3
6
284D-FHD6P0Z-25-RR 284D-FHD6P0D-25-RR 284D-FHD6P0B-25-RR
3
5
7.6
284D-FHD7P6Z-25-RR 284D-FHD7P6D-25-RR 284D-FHD7P6B-25-RR
1
2
3
4
5
6
NEMA Type 4X with conduit entrance, Volts per Hertz (SVP) torque performance, Up to 480V AC
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
200…240V, 50/60
Hz
3-Phase
0.4
0.5
2.3
284D-SHB2P3Z-10-CR 284D-SHB2P3D-10-CR 284D-SHB2P3B-10-CR
0.75
1
4.5
284D-SHB4P5Z-10-CR 284D-SHB4P5D-10-CR 284D-SHB4P5B-10-CR
1.5
2
7.6
284D-SHB7P6Z-25-CR 284D-SHB7P6D-25-CR 284D-SHB7P6B-25-CR
0.4
0.5
1.4
284D-SHD1P4Z-10-CR 284D-SHD1P4D-10-CR 284D-SHD1P4B-10-CR
0.75
1
2.3
284D-SHD2P3Z-10-CR 284D-SHD2P3D-10-CR 284D-SHD2P3B-10-CR
1.5
2
4
284D-SHD4P0Z-10-CR 284D-SHD4P0D-10-CR 284D-SHD4P0B-10-CR
2.2
3
6
284D-SHD6P0Z-25-CR 284D-SHD6P0D-25-CR 284D-SHD6P0B-25-CR
3
5
7.6
284D-SHD7P6Z-25-CR 284D-SHD7P6D-25-CR 284D-SHD7P6B-25-CR
380…480V, 50/60
Hz
3-Phase
7
8
9
NEMA Type 4X with quick disconnects for ArmorConnect power media, Volts per Hertz (SVP) torque performance, Up to
480V AC
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
200…240V, 50/60
Hz
3-Phase
0.4
0.5
2.3
284D-SHB2P3Z-10-RR 284D-SHB2P3D-10-RR 284D-SHB2P3B-10-RR
284D-SHB4P5Z-10-RR 284D-SHB4P5D-10-RR 284D-SHB4P5B-10-RR
380…480V, 50/60
Hz
3-Phase
0.75
1
4.5
1.5
2
7.6
284D-SHB7P6Z-25-RR 284D-SHB7P6D-25-RR 284D-SHB7P6B-25-RR
0.4
0.5
1.4
284D-SHD1P4Z-10-RR 284D-SHD1P4D-10-RR 284D-SHD1P4B-10-RR
0.75
1
2.3
284D-SHD2P3Z-10-RR 284D-SHD2P3D-10-RR 284D-SHD2P3B-10-RR
1.5
2
4
284D-SHD4P0Z-10-RR 284D-SHD4P0D-10-RR 284D-SHD4P0B-10-RR
2.2
3
6
284D-SHD6P0Z-25-RR 284D-SHD6P0D-25-RR 284D-SHD6P0B-25-RR
3
5
7.6
284D-SHD7P6Z-25-RR 284D-SHD7P6D-25-RR 284D-SHD7P6B-25-RR
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-37
Bulletin 284
ArmorStart® Distributed Motor Controller
Product Selection
ArmorPoint Bus Network Communication
0
1
2
3
4
IP67/NEMA Type 4 with conduit entrance, Volts per Hertz (SVP) torque performance, Up to 480V AC
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
200…240V, 50/60
Hz
3-Phase
0.4
0.5
2.3
284A-FHB2P3Z-10-CR 284A-FHB2P3D-10-CR 284A-FHB2P3B-10-CR
284A-FHB4P5Z-10-CR 284A-FHB4P5D-10-CR 284A-FHB4P5B-10-CR
380…480V, 50/60
Hz
3-Phase
0.75
1
5
1.5
2
7.6
284A-FHB7P6Z-25-CR 284A-FHB7P6D-25-CR 284A-FHB7P6B-25-CR
0.4
0.5
1.4
284A-FHD1P4Z-10-CR 284A-FHD1P4D-10-CR 284A-FHD1P4B-10-CR
0.75
1
2.3
284A-FHD2P3Z-10-CR 284A-FHD2P3D-10-CR 284A-FHD2P3B-10-CR
1.5
2
4
284A-FHD4P0Z-10-CR 284A-FHD4P0D-10-CR 284A-FHD4P0B-10-CR
2.2
3
6
284A-FHD6P0Z-25-CR 284A-FHD6P0D-25-CR 284A-FHD6P0B-25-CR
3
5
7.6
284A-FHD7P6Z-25-CR 284A-FHD7P6D-25-CR 284A-FHD7P6B-25-CR
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Volts per Hertz (SVP) torque performance, Up
to 480V AC
Input Voltage
200…240V, 50/60 Hz
3-Phase
5
380…480V, 50/60 Hz
3-Phase
6
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
3-Phase kW Rating
3-Phase
Hp
Rating
Output Current [A]
0.4
0.5
2.3
284A-FHB2P3Z-10-RR 284A-FHB2P3D-10-RR 284A-FHB2P3B-10-RR
0.75
1
4.5
284A-FHB4P5Z-10-RR 284A-FHB4P5D-10-RR 284A-FHB4P5B-10-RR
1.5
2
7.6
284A-FHB7P6Z-25-RR 284A-FHB7P6D-25-RR 284A-FHB7P6B-25-RR
0.4
0.5
1.4
284A-FHD1P4Z-10-RR 284A-FHD1P4D-10-RR 284A-FHD1P4B-10-RR
0.75
1
2.3
284A-FHD2P3Z-10-RR 284A-FHD2P3D-10-RR 284A-FHD2P3B-10-RR
1.5
2
4
284A-FHD4P0Z-10-RR 284A-FHD4P0D-10-RR 284A-FHD4P0B-10-RR
2.2
3
6
284A-FHD6P0Z-25-RR 284A-FHD6P0D-25-RR 284A-FHD6P0B-25-RR
3
5
7.6
284A-FHD7P6Z-25-RR 284A-FHD7P6D-25-RR 284A-FHD7P6B-25-RR
7
8
9
10
11
12
13
www.ab.com/catalogs
4-38
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Catalog Number Explanation/Product Selection — PowerFlex40
Sensorless Vector Control (SVC), typical of Powerflex 40 Class Drive
Examples given in this section are for reference purposes. This basic explanation should not be used for product selection; not all
combinations will produce a valid catalog number.
284 D – F
a
b
V D2P3 D – 10 – CR – Option 1 – Option 2 – Option 3
c
d
e
f
g
h
i
j
k
a
b
c
d
Communications
Enclosure Type
Torque Performance Mode
Description
Code
Description
Code
Description
284
VFD Starter
E
EtherNet/IP
F
Type 4 (IP67)
D
DeviceNet
S
Type 4X
A
ArmorPoint
380…480V
500…600V
Code
Description
Code
Description
Code
Description
B2P3
2.3 A, 0.4 kW, 0.5 Hp
D1P4
1.4 A, 0.4 kW, 0.5 Hp
E1P7
1.7 A, 0.75 kW, 1.0 Hp
B5P0
5.0 A, 0.75 kW, 1.0 Hp
D2P3
Description
V
Sensorless Vector Control
and Volts per Hertz
2.3 A, 0.75 kW, 1.0 Hp
E3P0
Code
Description
Z
24V DC
D
120V AC
240V AC
B
4
3.0 A, 1.5 kW, 2.0 Hp
Short Circuit Protection (Motor
Circuit Protector)
7.6 A, 1.5 kW, 2.0 Hp
D4P0
4.0 A, 1.5 kW, 2.0 Hp
E4P2
4.2 A, 2.2 kW, 3.0 Hp
—
—
D6P0
6.0 A, 2.2 kW, 3.0 Hp
E6P6
6.6 A, 4.0 kW, 5.0 Hp
—
—
D7P6
7.6 A, 3.3 kW, 5.0 Hp
—
—
Code
Description
10
10 A Rated Device
25
25 A Rated Device
h
i
j
Control and 3-Phase Power Connections / Motor Cable Connection
(CR: Conduit/Round Media) or (RR: Round/Round Media)
Option 1
Option 2
Code
Description
3
Hand/Off/Auto Selector
Keypad with Jog Function
Description
blank
Control Power
3-Phase Power
Motor Cable
Conduit Entrance
Conduit Entrance
3 m, unshielded
cordset male 90°
3
g
B7P6
Code
2
f
e
200…240V
Code
Control Voltage
Output Current
Code
Description
CB blank
Control Brake
Contactor
CB
DB
W1
Conduit Entrance
Conduit Entrance
3 m, shielded
cordset male 90°
CR
W1
Conduit Entrance
Conduit Entrance
No cable
RR
blank
Round Media
(Male Receptacle)
Round Media
(Male Receptacle)
3 m, unshielded
cordset male 90°
RR
N
Round Media
(Male Receptacle)
Round Media
(Male Receptacle)
3 m, shielded
cordset male 90°
k
W1
Round Media
(Male Receptacle)
Round Media
(Male Receptacle)
No cable
Option 3
Not available with EtherNet/IP.
‡ Not available with round media option (RR).
§ The output contactor is included with the Safety Monitor option.
6
No cable
N
1 See Accessories on page 4-82 for extended motor and brake cable lengths.
5
blank DB Brake Connector
CR
RR
1
Bulletin Number
Code
CR
0
DB1 blank
SB
blank
SB
W1
Connectivity to IP67
DB Resistor
7
Source Brake
Contactor
No cable
8
Code
Description
A10
0…10V Analog Input
9
EMI
EMI Filter
OC
Output Contactor
SM‡
§
Safety Monitor
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-39
Bulletin 284
ArmorStart® Distributed Motor Controller
Product Selection
EtherNet/IP Network Communication
0
IP67/NEMA Type 4 with conduit entrance, Sensorless Vector Control, and Volts per Hertz torque performance, Up to 480V
AC
24V DC Control Voltage
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
Cat. No.
0.4
0.5
1.4
284E-FVD1P4Z-10-CR
0.75
1
2.3
284E-FVD2P3Z-10-CR
1.5
2
4
284E-FVD4P0Z-10-CR
2.2
3
6
284E-FVD6P0Z-25-CR
3
5
7.6
284E-FVD7P6Z-25-CR
1
380...480V, 50/60 Hz
3-Phase
2
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Sensorless Vector Control, and Volts per Hertz
torque performance, Up to 480V AC
24V DC Control Voltage
3
4
5
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
Cat. No.
0.4
0.5
1.4
284E-FVD1P4Z-10-RR
0.75
1
2.3
284E-FVD2P3Z-10-RR
1.5
2
4
284E-FVD4P0Z-10-RR
2.2
3
6
284E-FVD6P0Z-25-RR
3
5
7.6
284E-FVD7P6Z-25-RR
380…480V, 50/60 Hz
3-Phase
DeviceNet Network Communication
IP67/NEMA Type 4 with conduit entrance, Sensorless Vector Control, and Volts per Hertz torque performance, Up to 575V
AC
6
Input Voltage
7
8
9
200...240V, 50/60 Hz
3-Phase
380...480V, 50/60 Hz
3-Phase
460…600V, 50/60
Hz
3-Phase
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
0.4
0.5
2.3
284D-FVB2P3Z-10-CR 284D-FVB2P3D-10-CR 284D-FVB2P3B-10-CR
284D-FVB5P0Z-10-CR 284D-FVB5P0D-10-CR 284D-FVB5P0B-10-CR
0.75
1
5
1.5
2
7.6
284D-FVB7P6Z-25-CR 284D-FVB7P6D-25-CR 284D-FVB7P6B-25-CR
0.4
0.5
1.4
284D-FVD1P4Z-10-CR 284D-FVD1P4D-10-CR 284D-FVD1P4B-10-CR
0.75
1
2.3
284D-FVD2P3Z-10-CR 284D-FVD2P3D-10-CR 284D-FVD2P3B-10-CR
1.5
2
4
284D-FVD4P0Z-10-CR 284D-FVD4P0D-10-CR 284D-FVD4P0B-10-CR
2.2
3
6
284D-FVD6P0Z-25-CR 284D-FVD6P0D-25-CR 284D-FVD6P0B-25-CR
3
5
7.6
284D-FVD7P6Z-25-CR 284D-FVD7P6D-25-CR 284D-FVD7P6B-25-CR
0.75
1
1.7
284D-FVE1P7Z-10-CR 284D-FVE1P7D-10-CR 284D-FVE1P7B-10-CR
1.5
2
3
284D-FVE3P0Z-10-CR 284D-FVE3P0D-10-CR 284D-FVE3P0B-10-CR
2.2
3
4.2
284D-FVE4P2Z-10-CR 284D-FVE4P2D-10-CR 284D-FVE4P2B-10-CR
4
5
6.1
284D-FVE6P6Z-25-CR 284D-FVE6P6D-25-CR 284D-FVE6P6B-25-CR
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Sensorless Vector Control, and Volts per Hertz
torque performance, Up to 575V AC
10
Input Voltage
11
12
13
200…240V, 50/60 Hz
3-Phase
380…480V, 50/60 Hz
3-Phase
460…600V, 50/60 Hz
3-Phase
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
0.4
0.5
2.3
284D-FVB2P3Z-10-RR 284D-FVB2P3D-10-RR 284D-FVB2P3B-10-RR
0.75
1
5
284D-FVB5P0Z-10-RR 284D-FVB5P0D-10-RR 284D-FVB5P0B-10-RR
1.5
2
7.6
284D-FVB7P6Z-25-RR 284D-FVB7P6D-25-RR 284D-FVB7P6B-25-RR
0.4
0.5
1.4
284D-FVD1P4Z-10-RR 284D-FVD1P4D-10-RR 284D-FVD1P4B-10-RR
0.75
1
2.3
284D-FVD2P3Z-10-RR 284D-FVD2P3D-10-RR 284D-FVD2P3B-10-RR
1.5
2
4
284D-FVD4P0Z-10-RR 284D-FVD4P0D-10-RR 284D-FVD4P0B-10-RR
2.2
3
6
284D-FVD6P0Z-25-RR 284D-FVD6P0D-25-RR 284D-FVD6P0B-25-RR
3
5
7.6
284D-FVD7P6Z-25-RR 284D-FVD7P6D-25-RR 284D-FVD7P6B-25-RR
0.75
1
1.7
284D-FVE1P7Z-10-RR 284D-FVE1P7D-10-RR 284D-FVE1P7B-10-RR
1.5
2
3
284D-FVE3P0Z-10-RR 284D-FVE3P0D-10-RR 284D-FVE3P0B-10-RR
2.2
3
4.2
284D-FVE4P2Z-10-RR 284D-FVE4P2D-10-RR 284D-FVE4P2B-10-RR
4
5
6.1
284D-FVE6P6Z-25-RR 284D-FVE6P6D-25-RR 284D-FVE6P6B-25-RR
www.ab.com/catalogs
4-40
24V DC
Control Voltage
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Product Selection
DeviceNet Network Communication, Continued
NEMA Type 4X with conduit entrance, Sensorless Vector Control, and Volts per Hertz torque performance, Up to 575V AC
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
200…240V, 50/60
Hz
3-Phase
0.4
0.5
2.3
284D-SVB2P3Z-10-CR 284D-SVB2P3D-10-CR 284D-SVB2P3B-10-CR
380…480V, 50/60
Hz
3-Phase
460…600V, 50/60
Hz
3-Phase
0.75
1
5
284D-SVB5P0Z-10-CR 284D-SVB5P0D-10-CR 284D-SVB5P0B-10-CR
1.5
2
7.6
284D-SVB7P6Z-25-CR 284D-SVB7P6D-25-CR 284D-SVB7P6B-25-CR
0.4
0.5
1.4
284D-SVD1P4Z-10-CR 284D-SVD1P4D-10-CR 284D-SVD1P4B-10-CR
0.75
1
2.3
284D-SVD2P3Z-10-CR 284D-SVD2P3D-10-CR 284D-SVD2P3B-10-CR
1.5
2
4
284D-SVD4P0Z-10-CR 284D-SVD4P0D-10-CR 284D-SVD4P0B-10-CR
2.2
3
6
284D-SVD6P0Z-25-CR 284D-SVD6P0D-25-CR 284D-SVD6P0B-25-CR
3
5
7.6
284D-SVD7P6Z-25-CR 284D-SVD7P6D-25-CR 284D-SVD7P6B-25-CR
0.75
1
1.7
284D-SVE1P7Z-10-CR 284D-SVE1P7D-10-CR 284D-SVE1P7B-10-CR
1.5
2
3
284D-SVE3P0Z-10-CR 284D-SVE3P0D-10-CR 284D-SVE3P0B-10-CR
2.2
3
4.2
284D-SVE4P2Z-10-CR 284D-SVE4P2D-10-CR 284D-SVE4P2B-10-CR
4
5
6.1
284D-SVE6P6Z-25-CR 284D-SVE6P6D-25-CR 284D-SVE6P6B-25-CR
NEMA Type 4X with quick disconnects for ArmorConnect power media, Sensorless Vector Control, and Volts per Hertz
torque performance, Up to 575V AC
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
Input Voltage
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
200…240V, 50/60
Hz
3-Phase
0.4
0.5
2.3
284D-SVB2P3Z-10-RR 284D-SVB2P3D-10-RR 284D-SVB2P3B-10-RR
284D-SVB5P0Z-10-RR 284D-SVB5P0D-10-RR 284D-SVB5P0B-10-RR
380…480V, 50/60
Hz
3-Phase
460…600V, 50/60
Hz
3-Phase
0.75
1
5
1.5
2
7.6
284D-SVB7P6Z-25-RR 284D-SVB7P6D-25-RR 284D-SVB7P6B-25-RR
0.4
0.5
1.4
284D-SVD1P4Z-10-RR 284D-SVD1P4D-10-RR 284D-SVD1P4B-10-RR
0.75
1
2.3
284D-SVD2P3Z-10-RR 284D-SVD2P3D-10-RR 284D-SVD2P3B-10-RR
1.5
2
4
284D-SVD4P0Z-10-RR 284D-SVD4P0D-10-RR 284D-SVD4P0B-10-RR
2.2
3
6
284D-SVD6P0Z-25-RR 284D-SVD6P0D-25-RR 284D-SVD6P0B-25-RR
3
5
7.6
284D-SVD7P6Z-25-RR 284D-SVD7P6D-25-RR 284D-SVD7P6B-25-RR
0.75
1
1.7
284D-SVE1P7Z-10-RR 284D-SVE1P7D-10-RR 284D-SVE1P7B-10-RR
1.5
2
3
284D-SVE3P0Z-10-RR 284D-SVE3P0D-10-RR 284D-SVE3P0B-10-RR
2.2
3
4.2
284D-SVE4P2Z-10-RR 284D-SVE4P2D-10-RR 284D-SVE4P2B-10-RR
4
5
6.1
284D-SVE6P6Z-25-RR 284D-SVE6P6D-25-RR 284D-SVE6P6B-25-RR
0
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-41
Bulletin 284
ArmorStart® Distributed Motor Controller
Product Selection/Options
ArmorPoint Bus Network Communication
0
IP67/NEMA Type 4 with conduit entrance, Sensorless Vector Control, and Volts per Hertz torque performance, Up to
575V AC
Input Voltage
1
2
3
4
200…240V, 50/60 Hz
3-Phase
380…480V, 50/60 Hz
3-Phase
460…600V, 50/60 Hz
3-Phase
6
7
8
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
0.4
0.5
2.3
284A-FVB2P3Z-10-CR 284A-FVB2P3D-10-CR 284A-FVB2P3B-10-CR
284A-FVB5P0Z-10-CR 284A-FVB5P0D-10-CR 284A-FVB5P0B-10-CR
0.75
1
5
1.5
2
7.6
284A-FVB7P6Z-25-CR 284A-FVB7P6D-25-CR 284A-FVB7P6B-25-CR
0.4
0.5
1.4
284A-FVD1P4Z-10-CR 284A-FVD1P4D-10-CR 284A-FVD1P4B-10-CR
0.75
1
2.3
284A-FVD2P3Z-10-CR 284A-FVD2P3D-10-CR 284A-FVD2P3B-10-CR
1.5
2
4
284A-FVD4P0Z-10-CR 284A-FVD4P0D-10-CR 284A-FVD4P0B-10-CR
2.2
3
6
284A-FVD6P0Z-25-CR 284A-FVD6P0D-25-CR 284A-FVD6P0B-25-CR
3
5
7.6
284A-FVD7P6Z-25-CR 284A-FVD7P6D-25-CR 284A-FVD7P6B-25-CR
0.75
1
1.7
284A-FVE1P7Z-10-CR 284A-FVE1P7D-10-CR 284A-FVE1P7B-10-CR
1.5
2
3
284A-FVE3P0Z-10-CR 284A-FVE3P0D-10-CR 284A-FVE3P0B-10-CR
2.2
3
4.2
284A-FVE4P2Z-10-CR 284A-FVE4P2D-10-CR 284A-FVE4P2B-10-CR
4
5
6.1
284A-FVE6P6Z-25-CR 284A-FVE6P6D-25-CR 284A-FVE6P6B-25-CR
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Sensorless Vector Control, and Volts per Hertz
torque performance, Up to 575V AC
Input Voltage
5
24V DC
Control Voltage
200…240V, 50/60 Hz
3-Phase
380…480V, 50/60 Hz
3-Phase
460…600V, 50/60 Hz
3-Phase
24V DC
Control Voltage
120V AC
Control Voltage
240V AC
Control Voltage
Cat. No.
Cat. No.
Cat. No.
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
0.4
0.5
2.3
284A-FVB2P3Z-10-RR 284A-FVB2P3D-10-RR 284A-FVB2P3B-10-RR
0.75
1
5
284A-FVB5P0Z-10-RR 284A-FVB5P0D-10-RR 284A-FVB5P0B-10-RR
1.5
2
7.6
284A-FVB7P6Z-25-RR 284A-FVB7P6D-25-RR 284A-FVB7P6B-25-RR
0.4
0.5
1.4
284A-FVD1P4Z-10-RR 284A-FVD1P4D-10-RR 284A-FVD1P4B-10-RR
0.75
1
2.3
284A-FVD2P3Z-10-RR 284A-FVD2P3D-10-RR 284A-FVD2P3B-10-RR
1.5
2
4
284A-FVD4P0Z-10-RR 284A-FVD4P0D-10-RR 284A-FVD4P0B-10-RR
2.2
3
6
284A-FVD6P0Z-25-RR 284A-FVD6P0D-25-RR 284A-FVD6P0B-25-RR
3
5
7.6
284A-FVD7P6Z-25-RR 284A-FVD7P6D-25-RR 284A-FVD7P6B-25-RR
0.75
1
1.7
284A-FVE1P7Z-10-RR 284A-FVE1P7D-10-RR 284A-FVE1P7B-10-RR
1.5
2
3
284A-FVE3P0Z-10-RR 284A-FVE3P0D-10-RR 284A-FVE3P0B-10-RR
2.2
3
4.2
284A-FVE4P2Z-10-RR 284A-FVE4P2D-10-RR 284A-FVE4P2B-10-RR
4
5
6.1
284A-FVE6P6Z-25-RR 284A-FVE6P6D-25-RR 284A-FVE6P6B-25-RR
Options — Factory Installed
Description
Cat. No. Modification
Hand/Off/Auto Selector and Jog Keypad
9
10
Safety Monitor (includes output contactor)‡
-SM
EMI Filter
-EMI
Output Contactor
-CRN
Supplied without motor cable
-CRW
Control Brake supplied without cable
Source brake supplied with cable
12
13
-CB
-CBW
-SB
Source brake supplied without cable
-SBW
0…10 Analog Input
-A10
Dynamic Brake Connector (IP20 brake)
-DB
Dynamic Brake Connector (IP67 brake)
-DB1
ArmorConnect Power Media Connectivity, ArmorStart supplied
with shielded motor cable
-RRN
ArmorConnect Power Media Connectivity, ArmorStart supplied
without motor cable
-RRW
Not available with EtherNet/IP communications.
‡ Not available with round media option (RR).
www.ab.com/catalogs
4-42
-OC
Shielded motor cable
Control Brake supplied with cable
11
-3
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Specifications
Connections
0
Bulletin 284E ArmorStart with EtherNet/IP Communications
Local
Disconnect
1
LED Status
Indication
HOA with JOG
(optional)
2 Outputs
(Micro/M12)
4 Inputs
(Micro/M12)
2
Source Brake
Connector
(optional)
IP Address
Switches
3
Motor
Connection
Embedded
2-Port Switch
Ground
Terminal
4
Dynamic Brake Connector (optional)
Bulletin 284D ArmorStart with DeviceNet Communications
5
Local
Disconnect
LED Status
Indication
Source Brake
Connector
(optional)
4 Inputs
(Micro/M12)
DeviceNet
Connection
(Mini/M18)
Ground
Terminal
6
HOA
(optional)
2 Outputs
(Micro/M12)
7
Motor
Connection
8
Dynamic Brake Connector (optional)
0…10V Analog Input (optional)*
9
Bulletin 284A ArmorStart for the ArmorPoint Backplane
Local
Disconnect
LED Status
Indication
HOA
(optional)
2 Outputs
(Micro/M12)
Source Brake
Connector
(optional)
ArmorPoint
Interface (IN)
11
Motor
Connection
ArmorPoint
Interface (OUT)
Ground
Terminal
10
Dynamic Brake Connector (optional)
12
0…10V Analog Input (optional)*
13
1 Only available with SVC.
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-43
Bulletin 284
ArmorStart® Distributed Motor Controller
Specifications
ArmorStart Receptacle Pin Outs
0
Receptacle Connections for 0…10V Analog Input (M22)
Pin
Pin
Pin
Pin
Pin
1
1:
2:
3:
4:
5:
Receptacle Connections for Input (M12)
10V DC
0…10V input
Analog common
Analog output
NC (no connection)
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
+24V (A3 or DNET)
Input 0
Common
Input 1
NC (no connection)
2
Receptacle Connections for ArmorPoint Interface (OUT)
3
Pin
Pin
Pin
Pin
Pin
Pin
Pin
4
5
1:
2:
3:
4:
5:
7:
8:
CAN high
Common
+5V
CAN low
Enable out
Common
NC (no connection)
Receptacle Connections for ArmorPoint Interface (IN)
Pin
Pin
Pin
Pin
Pin
Pin
Pin
6
1:
2:
3:
4:
5:
7:
8:
Receptacle Connections for Output, EtherNet/IP Version
(M12)
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
NC (no connection)
NC (no connection)
Common
Output +24V DC (A1)
NC (no connection)
Receptacle Connections for Output, DeviceNet or
ArmorPoint Version (M12)
CAN high
Common
+5V
CAN low
Enable out
Common
PE
Pin 1: PE
Pin 2: Return
Pin 3: Relay out
7
Receptacle Connections for DeviceNet Connector
Receptacle Connections for Dynamic Brake (M22)
8
Pin
Pin
Pin
Pin
Pin
9
10
1:
2:
3:
4:
5:
Drain (no connection)
+VDNET
-VDNET
CAN_H
CAN_L
Receptacle Connections for EtherNet/IP (M12)
11
Pin
Pin
Pin
Pin
1:
2:
3:
4:
Pin 1: GND (green/yellow)
Pin 2: BR+ (black)
Pin 3: BR- (white)
Receptacle Connections for Incoming Control Power (M22)
Pin
Pin
Pin
Pin
Pin
Pin
Tx+
Rx+
TxRx-
12
13
www.ab.com/catalogs
4-44
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
1:
2:
3:
4:
5:
6:
Unswitched (A3)(red)
Common (A2)(black)
PE (green)
Not used (blank)
Switched (A1)(blue)
Not used (white)
Bulletin 284
ArmorStart Distributed Motor Controller
®
Specifications
ArmorStart Receptacle Pin Outs, Continued
Receptacle Connections for Source or Control Brake (M25)
Receptacle Connections for Incoming 3-phase Power 10 A Short Circuit Protection (M22)
Pin 1: L1 (black)
Pin 2: GND (green/yellow)
Pin 3: L2 (white)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
0
1
L1 (black)
L2 (white)
L3 (red)
Ground (green/yellow)
2
Receptacle Connections for Motor Connector (M22)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
Receptacle Connections for Incoming 3-phase Power 25 A Short Circuit Protection (M35)
T1 (black)
T2 (white)
T3 (red)
Ground (green/yellow)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
L1 (black)
Ground (green/yellow)
L3 (red)
L2 (white)
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-45
Bulletin 284
ArmorStart® Distributed Motor Controller
Specifications
Electrical Ratings
0
1
Power Circuit
UL/NEMA
IEC
Rated Operation Voltage
200…575V
200…500V
600V
Rate Insulation Voltage
600V
Rated Impulsed Voltage
6 kV
6 kV
Dielectric Withstand
2200V AC
2500V AC
Operating Frequency
50/60 Hz
50/60 Hz
Utilization Category
N/A
AC-3
Protection Against Shock
N/A
IP2X
2.5 A
Rated Maximum Operating Current
5.5 A
16 A
2
24V DC (+10%, -15%) A2 (should be grounded at voltage source)
Rated Operation Voltage
120V AC (+10%, -15%) A2 (should be grounded at voltage source)
240V AC (+10%, -15%) A2 (should be grounded at voltage source)
3
Control Circuit
Rate Insulation Voltage
250V
Rated Impulsed Voltage
—
4 kV
Dielectric Withstand
1500V AC
2000V AC
Overvoltage Category
—
III
Operating Frequency
50/60 Hz
50/60 Hz
Current Rating
4
Short Circuit
Protection
250V
SCPD Performance Type 1
10 A
25 A
Voltage
Sym. Amps RMS
SCPD List
480Y/277V
480Y/480V
600Y/347V
600V
65 kA
65 kA
30 kA
30 kA
30 kA
30 kA
30 kA
30 kA
Size per NFPA 70 (NEC) or NFPA 79 for Group Motor Applications
UL/NEMA
5
Environmental
6
IEC
Operating Temperature Range
-20…+40 °C (-4…+104 °F)
Storage and Transportation
Temperature Range
–25….+85 °C (–13…+185 °F)
Altitude
1000 m
Humidity
5…95% (non-condensing)
Pollution Degree
3
Enclosure Ratings
NEMA 4/12/13
IP67
NEMA 4X
IP69K
Approximate Shipping Weight
13.6 kg (30 lb)
Resistance to Shock
7
Operational
15 G
Non-Operational
30 G
Resistance to Vibration
8
Mechanical
9
Operational
1 G, 0.15 mm (0.006 in.) displacement
Non-Operational
2.5 G, 0.38 mm (0.015 in.) displacement
Wire Size
Primary/Secondary terminal:
(16 …10 AWG)
Primary/Secondary terminal:
1.5…4.0 mm2
Tightening Torque
Primary terminal:
10.8 lb•in
Secondary terminal:
4.5 lb•in
Primary terminal:
(1.2 N•m)
Secondary terminal:
(0.5 N•m)
Wire Strip Length
0.35 in. (9 mm)
Control and Safety Monitor Inputs
10
11
12
EMC Emission Levels
Wire Size
(18…10 AWG)
Tightening Torque
6.2 lb•in
0.35 in. (9 mm)
Disconnect Lock Out
Maximum of 5/16 in. (8 mm) lock shackle or hasp. The hasp should not exceed
5/16 in. (8 mm) when closed, or damage will occur to disconnect guard.
Conducted Radio Frequency Emissions
10V rms Communication cables
10V rms (PE)
150 kHz…80 MHz
Radiated Emissions
Class A
Electrostatic Discharge
4 kV contact and 8 kV Air
Radio Frequency Electromagnetic Field
10V/m, 80 KHz…1 GHz
3V/m, 1.4 GHz…2.0 GHz
1V/m, 2.0 GHz…2.7 GHz
Fast Transient
2 kV (Power)
2 kV (PE)
1 kV (Communications and control)
EMC Immunity Levels
1 kV (12)
L-L,
2 kV (2)
L-N
(earth)
UL 508C; CSA C22.2, No. 14; EN50178; EN61800-3; EN/IEC 60947-4-2; CE Marked
per Low Voltage 2006/95/EC; EMC Directive 2004/108/EC; CCC; ODVA for
EtherNet/IP; ODVA for DeviceNet
Standards Compliance
Certifications
cULus (File No. E207834, Guide NMMS, NMMS7)
www.ab.com/catalogs
4-46
0.7 N•m
Wire Strip Length
Surge Transient
13
1.0…4.0 mm2
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Specifications
ArmorPoint and DeviceNet Versions — Control and I/O Power Requirements
Units
No Options
Brake or Output Contactor
With Brake and Output Contactor
Control Voltage
Volts
24V DC
120V AC
240V AC
24V DC
120V AC
240V AC
24V DC
120V AC
240V AC
Total Control VA
(Pick Up)
VA (W)
(11 W)
16
24
(13 W)
38
46
(16 W)
60
68
Total Control VA
(Hold In)
VA (W)
(11 W)
16
24
(13 W)
20
28
(16 W)
24
32
External Devices powered by Control Voltage
Outputs (2)
(1 A max. each)
Amps
2
2
2
2
2
2
2
2
2
Total Control VA
(Pick Up) with
max. outputs
VA (W)
(59 W)
256
504
(61 W)
278
548
(64 W)
300
548
Total Control VA
(Hold In) with
max. outputs
VA (W)
(59 W)
256
504
(61 W)
261
512
(64 W)
264
512
UL/NEMA
Rated Operation Voltage
24V DC
10…26V DC
4
7.2 mA @ 24V DC
Input Off-State Voltage Range
0…5V DC
Input Off-State Current
<1.5 mA
Input Filter — Software Selectable
Off to On
Settable from 0…64 ms in 1 ms increments
On to Off
Settable from 0…64 ms in 1 ms increments
Input Compatibility
N/A
5
IEC 1+
Number of Inputs
4
Sensor Source
Output Ratings
Sourced from control circuit - A1/A2
DeviceNet Specifications
DeviceNet Communications
ArmorPoint Ratings
2
3.0 mA @ 10V DC
Input On-State Current
Input Ratings
1
3
IEC
Input On-State Voltage Range
0
6
Voltage Status Only
11…25V DC from DeviceNet
Current Available
50 mA max. per input, 200 mA total
Rated Operation Voltage
240V AC/30V DC
Rate Insulation Voltage
250V
240V AC/30V DC
250V
Dielectric Withstand
1500V AC
2000V AC
Operating Frequency
50/60 Hz
Type of Control Circuit
Electromechanical relay
Type of Current
AC/DC
Conventional Thermal Current Ith
Total of both outputs ≤ 2 A
Type of Contacts
Normally open (N.O.)
Number of Contacts
2
DeviceNet Supply Voltage Rating
Range 11…25V DC, 24V DC nominal
DeviceNet Input Current
167 mA @ 24V DC - 4.0 W
DeviceNet Input Current
364 mA @ 11V DC - 4.0 W
External Devices powered by
DeviceNet
Sensors inputs 4 x 50 mA - total 200 mA
Total w/max Sensor Inputs (4)
367 mA @ 24V DC - 8.8 W
DeviceNet Input Current Surge
15 A for 250 μs
Baud Rates
125, 250, 500 kbps
Distance Maximum
500 m (1630 ft) @ 125 kbps
Distance Maximum
200 m (656 ft) @ 250 kbps
Distance Maximum
100 m (328 ft) @ 500 kbps
Backplane Current Load
400 mA
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-47
Bulletin 284
ArmorStart® Distributed Motor Controller
Specifications
EtherNet/IP Version - Control and I/O Power Requirements
1
A1/A21
Units
0
Control Voltage
Volts
A3/A2
A3/A2‡
24V DC
Current
Amps
0.375
0.125
0.35
Total Control Power (no options)
Watts
9
3
8.4
Total Control Power (with Dynamic Brake or Output Contactor option)
Watts
12
3
8.4
Total Control Power (with Dynamic Brake and Output Contactor option)
Watts
15
3
8.4
1 Add power requirements for outputs (1 A max.) to A1/A2.
Add power requirements for intputs (200 mA max.) to A3/A2.
‡ If A1 power is disconnected.
2
UL/NEMA
IEC
Rated Operation Voltage
24V DC
Input On-State Voltage Range
10…26V DC
3.0 mA @ 10V DC
Input On-State Current
3
7.2 mA @ 24V DC
Input Off-State Voltage Range
0…5V DC
Input Off-State Current
Input Ratings
Sourced from control circuit - A3/A2
4
<1.5 mA
Input Filter — Software Selectable
Off to On
Settable from 0…64 ms in 1 ms increments
On to Off
Settable from 0…64 ms in 1 ms increments
Input Compatibility
N/A
IEC 1+
Number of Inputs
4
Sensor Source
5
Voltage Status Only
11…26.4V DC from DeviceNet
Current Available
50 mA max. per input, 200 mA total
Rated Operation Voltage
26.4V DC
Rate Insulation Voltage
250V
Dielectric Withstand
Type of Control Circuit
6
7
1500V AC (UL)
Output Ratings
Sourced from control circuit - A1/A2
8
2000V AC (IEC)
Solid state sourcing output
Type of Current
24V DC
Conventional Thermal Current Ith
0.5 A each, 1 A max. combined
Type of Contacts
Normally open (N.O.)
Number of Contacts
2
Load Types
Resistive or light inductive
Surge Suppression
Integrated diode, clamps @ 35V DC
Thermo-Protection
Integrated short circuit and over current protection
Maximum Cycle Rate
30 operations/minute capacitive and inductive loads
Maximum Blocking Voltage
35V DC
Maximum On-State Voltage @
Maximum Output
1.5V DC
10 μA
Maximum Off-State Leakage Current
Beacon-based performance including IEEE 1588 end to end transparent clock
Device Level Ring (DLR)
9
10
Maximum Nodes
50
Fault Recovery
Ring recovery time is less than 3 ms for a 50 node network
2 D-coded, 4-pin female M12 connecters
EtherNet Port
Ports
Embedded switch with 2 ports
IP Address
DHCP enabled by default
DHCP Timeout
30 seconds
Communication Rate
10/100 Mbs with auto negotiate half duplex and full duplex
Transported over both TCP and UDP
Min. of 500 I/O packets/second (pps)
Supports up to 150 concurrent TCP sockets
Data
Embedded web server
11
Web Server
Security
Login and password configurable
E-mail
Support Simple Mail Transfer Protocol (SMTP)
Configuration
Status, diagnostics, and configuration tabs
Supports scheduled (Class 1) and unscheduled (Class 3 & UCMM) connections
6 - Class 3 connections are supported simultaneously
12
Minimum of 1 - Class 1 or maximum of 2 - Class 1, CIP connections
(1 exclusive owner, 1 input only and 1 listen only) are supported
Device Connections
Class 1 Connection API: 2…3200 ms
Class 3 Connection API: 100…10 000 ms
20 ms Request Packet Interval (RPI) default
13
3 concurrent Encapsulation sessions
TCP port supports 5 concurrent incoming connections
www.ab.com/catalogs
4-48
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Specifications
Sensorless Vector Performance
Sensorless Vector Control
Maximum Hp (kW)/
Input Voltage
Drive Characteristics
2 Hp (1.5 kW)/230V AC
5 Hp (3.3 kW)/480V AC
2 Hp (1.5 kW)/230V AC
5 Hp (3.3 kW)/480V AC, 5 Hp (4.0 kW)/600V AC
Overload Capacity
150% for 60 seconds, 200% for 3 seconds
150% for 60 seconds, 200% for 3 seconds
Output Frequency
(programmable)
0…400 Hz
0…400 Hz
Efficiency (typical)
97.5%
97.5%
Preset Speeds
Carrier Frequency
4
8
2…16 kHz
2…16 kHz
Skip Frequency
⎯
Process Control Loop
⎯
(PID)
StepLogic Functionality
⎯
Timer/Counter Functions
⎯
0
1
2
Drive Ratings — VFD Output Current vs. Input Current
Output Current [A]
Line
Voltage
Frequency
[Hz]
200
230
380
460
575
50
3-Phase kW
Rating
3-Phase Hp
Rating
0.4
⎯
0.75
1.5
Sensorless Vector Control
Sensorless Vector Control
Sensorless Vector
Performance
2.3
⎯
3.65
⎯
⎯
4.5
⎯
6.40
⎯
7.6
2.3
⎯
2.3
10.65
⎯
⎯
0.5
3.10
⎯
2.5
⎯
1
4.5
4.5
5.70
5.2
⎯
0.4
2
7.6
7.6
9.45
9.5
⎯
1.4
⎯
2.15
⎯
0.75
⎯
2.3
⎯
3.80
⎯
1.5
⎯
4.0
⎯
6.40
⎯
2.2
⎯
6.0
⎯
9.00
⎯
3.0
7.6
1.4
⎯
1.4
12.40
⎯
⎯
0.5
1.85
⎯
1.8
⎯
1
2.3
2.3
3.45
3.2
⎯
2
4.0
4.0
5.57
5.7
⎯
3
6.0
6.0
8.20
7.5
⎯
5
7.6
7.6
12.5
8.6
⎯
1
1.7
⎯
2.78
⎯
⎯
2
3.0
⎯
4.73
⎯
60
50
3
Input Current [A]
Sensorless Vector
Performance
60
60
⎯
3
4.2
⎯
6.64
⎯
⎯
5
6.6
⎯
10.75
⎯
4
5
6
7
8
Protective Specifications — Sensorless Vector Performance
I2t overload protection — 150% for 60 seconds, 200% for 3 seconds (provides Class 10 protection)
Motor Protection
Overcurrent
200% hardware limit, 300% instantaneous fault
Over Voltage
200…240V AC Input — Trip occurs @ 405V DC bus voltage (equivalent to 290V AC incoming line)
380…460V AC Input — Trip occurs @ 810V DC bus voltage (equivalent to 575V AC incoming line)
Under Voltage
200…240V AC Input — Trip occurs @ 210V DC bus voltage (equivalent to 150V AC incoming line)
380…480V AC Input — Trip occurs @ 390V DC bus voltage (equivalent to 275V AC incoming line)
Faultless Power Ride Through
9
100 milliseconds
10
Control Specifications — Sensorless Vector Performance
Carrier Frequency
2…16 kHz drive rating based on 4 kHz
Frequency Accuracy — Digital Input
within ±0.05% of set output frequency
Speed Regulation (open loop with slip compensation)
Stop Modes
Acceleration/Deceleration
Intermittent Overload
Electronic Motor Overload Protection
11
±2% of base speed across a 40:1 speed range
Multiple programmable stop modes including: Ramp, Coast, DC-Brake, Ramp-to-Hold, and S Curve
Two independently programmable acceleration and deceleration times: each time may be
programmed from 0…600 seconds in 0.1 second increments
150% overload capability for up to 1 minute, 200% overload capability for up to 3 seconds
Class 10 protection with speed sensitive response and power-down overload retention function
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-49
Bulletin 284
ArmorStart® Distributed Motor Controller
Specifications
Sensorless Vector Performance (SVP) Minimum DB Resistance
Input Voltage
0
Drive Rating [kW]
Drive Rating [Hp]
Minimum DB Resistance [Ω]
0.2
0.25
60
0.4
0.5
60
0.75
1
60
200…240V, 50/60 Hz,
Three-Phase
1
480V, 50/60 Hz,
Three-Phase
2
1.5
2
60
0.4
0.5
121
0.75
1
121
1.5
2
121
2.2
3
97
3.7
5
97
Protective Specifications — Sensorless Vector Control
I2t overload protection — 150% for 60 seconds, 200% for 3 seconds (provides Class 10 protection)
Motor Protection
3
4
Overcurrent
200% hardware limit, 300% instantaneous fault
Over Voltage
200…240V AC Input – Trip occurs @ 405V DC bus voltage (equivalent to 290V AC incoming line)
380…460V AC Input – Trip occurs @ 810V DC bus voltage (equivalent to 575V AC incoming line)
460…600V AC Input – Trip occurs @ 1005V DC bus voltage (equivalent to 711V AC incoming line)
Under Voltage
200…240V AC Input – Trip occurs @ 210V DC bus voltage (equivalent to 150V AC incoming line)
380…480V AC Input – Trip occurs @ 390V DC bus voltage (equivalent to 275V AC incoming line)
460…600V AC Input – If 600V rated trip occurs @ 487V DC bus voltage (344V AC incoming line);
If 480V rated trip occurs @ 390V DC bus voltage (275V AC incoming line)
Faultless Power Ride Through
100 milliseconds
Control Specifications — Sensorless Vector Control
5
Carrier Frequency
2…16 kHz drive rating based on 4 kHz
Frequency Accuracy — Digital Input
within ±0.05% of set output frequency
Speed Regulation (open loop with slip
compensation)
±1% of base speed across a 60:1 speed range
Stop Modes
6
Multiple programmable stop modes including: Ramp, Coast, DC-Brake, Ramp-to-Hold, and S Curve
Two independently programmable acceleration and deceleration times: each time may be programmed
from 0…600 seconds in 0.1 second increments
Acceleration/Deceleration
Intermittent Overload
150% overload capability for up to 1 minute, 200% overload capability for up to 3 seconds
Electronic Motor Overload Protection
Class 10 protection with speed sensitive response
Sensorless Vector Control (SVC) Minimum DB Resistance
7
Drive Rating
Input Voltage
240V, 50/60 Hz,
Three-Phase
8
480V, 50/60 Hz,
Three-Phase
9
600V, 50/60 Hz,
Three-Phase
10
Minimum DB Resistance
[kW]
[Hp]
[Ω]
0.4
0.5
48
0.75
1
48
1.5
2
48
0.4
0.5
97
0.75
1
97
1.5
2
97
2.2
3
97
4.0
5
77
0.75
1
120
1.5
2
120
2.2
3
82
4.0
5
82
Motor Overload Trip Curves
13
80
60
40
20
0
0
25 50 75 100 125 150 175 200
% of P132 [Motor NP Hertz]
Min Derate
100
80
60
40
20
0
0
www.ab.com/catalogs
4-50
25 50 75 100 125 150 175 200
% of P132 [Motor NP Hertz]
% of P133 [Motor OL Curent]
12
No Derate
100
% of P133 [Motor OL Curent]
% of P133 [Motor OL Curent]
11
Motor overload current parameter provides class 10 overload protection. Ambient insensitivity is inherent in the electronic design of the
overload.
Max Derate
100
80
60
40
20
0
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
0
25 50 75 100 125 150 175 200
% of P132 [Motor NP Hertz]
Bulletin 284
ArmorStart Distributed Motor Controller
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for IP67/NEMA Type 4 with Conduit Entrance
420.38 [16.55] (1 Hp or less @ 230V AC, 2 Hp or less @ 460…575V AC)
444.38 [17.50] (2 Hp @ 230V AC, 3 Hp or greater @ 460…575V AC)
290
[11.42]
1
236
[9]
2
268
[10.55]
287.5
[11.32 ]
3
3.02
[.12 ]
6.8
[.27 ]
4
MOTO R CONNECTION 266.9 [10.51]
373
[14.69]
11
[.43 ]
5
6
195
[7.68 ]
67.9
[3 ]
7
1 in. CONDUIT OPENING
39
[2 ]
47
[1.85 ]
0.75 in. CONDUIT OPENING
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-51
Bulletin 284
ArmorStart® Distributed Motor Controller
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for NEMA Type 4X with Conduit Entrance
420.38 [16.55] (1 Hp or less @ 230V AC, 2 Hp or less @ 460…575V AC)
444.38 [17.50] (2 Hp @ 230V AC, 3 Hp or greater @ 460…575V AC)
30.5
1
2
287.5
3
4
3.02
MOTOR CONNECTION 266.9 [10.51]
6.8
5
6
7
67.9
1 in. CONDUIT OPENING
8
38.972
0.75 in. CONDUIT OPENING
9
10
11
12
13
www.ab.com/catalogs
4-52
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for IP67/NEMA Type 4 with ArmorConnect Connectivity
420.38 [16.55] (1 Hp or less @ 230V AC, 2 Hp or less @ 480…575V AC)
290
[11.42]
444.38 [17.50] (2 Hp or greater @ 230V AC, 3 Hp or greater @ 480…575V AC)
290
[11.42]
30.4
[1 ]
1
268
[10.55]
287.5
268
[10.55] [11.32]
287.5
[11.32 ]
2
3
6.8
[.27 ]
6.8
[.27 ]
4
5
77.6
[3 ]
6
77.6
[3]
60.6
[2 ]
60.6
[2]
25.5
[1]
25.5
[1 ]
68
[2.68 ]
68
[2.68 ]
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-53
Bulletin 284
ArmorStart® Distributed Motor Controller
Approximate Dimensions
0
Dimensions for NEMA Type 4X with ArmorConnect Connectivity (1 Hp or less @ 230V AC and 2 Hp or less @
480…575V AC)
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-54
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284
ArmorStart Distributed Motor Controller
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for NEMA Type 4X with ArmorConnect Connectivity (2 Hp or greater @ 230V AC and 3 Hp or greater @
480…575V AC)
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-55
Bulletin 280D/281D, 284D
ArmorStart® Distributed Motor Controller — Safety Version
Product Overview
Distributed Motor Controllers — Safety Version
0
1
Bulletin
280D
281D
284D
Horsepower Range:
2
3
0.5…10 Hp (0.37…7.5 kW)
—
0.5…5 Hp (0.4…3.0 kW)
—
—
Starting Method:
Full-Voltage and Reversing
—
Sensorless Vector Control
—
—
IP67/NEMA Type 4
Control Voltage Rating:
24V DC
Environmental Rating:
Operational Voltage Ratings:
4
5
200…480V AC
—
380…480V AC
—
—
Rated for Group Motor Installations
Network Communications with DeviceNet™
including DeviceLogix™
I/O Capability:
Conduit Entrance
ArmorConnect Power Media
Quick Disconnects (I/O, Communications, Motor
Connection, Three-Phase and Control Power)
Extended Length Motor and Brake Cables
Four Inputs and Two Outputs
LED Status Indication
Gland Plate Entry:
6
7
8
Factory Installed Options:
HOA Keypad
Source Brake Contactor
—
—
Dynamic Brake Connector - DB1
—
—
EMI Filter
—
—
Shielded Motor Cable
—
—
Page 4-59
Page 4-59
Page 4-70
Product Selection
9
10
11
12
13
www.ab.com/catalogs
4-56
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280D/281D
ArmorStart Distributed Motor Controller — Safety Version
®
Product Overview
Bulletin 280D/281D ArmorStart Distributed Motor Controller
— Safety Version
Table of Contents
On-Machine starting solution
Full-voltage and reversing
Horsepower range 0.5…10 Hp (0.37…7.5 kW)
Robust IP67/NEMA Type 4 enclosure rating
Quick disconnect connections for I/O, communications, motor, and
three-phase power
Gland plate entry: conduit entrance or ArmorConnect power media
LED status indication
DeviceNet communications
Local logic technology using DeviceLogix
Peer-to-peer communication (ZIP)
Factory installed option:
− Hand/Off/Auto (HOA) keypad configuration
Product Selection ...... 4-59
Options .......................... 4-59
Accessories.................. 4-79
Specifications.............. 4-61
Approx. Dimensions . 4-64
Standards Compliance
UL 508
CSA C22.2, No. 14
EN/IEC 60947-4
EN/IEC 60947-4-1
CE Marked per Low Voltage
Directive 2006/95/EC and EMC
Directive 2004/108/EC
CCC
ODVA for DeviceNet
Certifications
0
1
2
3
cULus (File No. E3125, Guides
NLDX, NLDX7)
Description
The Bulletin 280/281 ArmorStart Distributed Motor Controller is an integrated, pre-engineered, starter for full-voltage and reversing
applications. Its modular design offers simplicity in wiring using quick disconnects for the I/O, communications, and motor connection.
Optional quick disconnects for control and three-phase power, fully integrates the plug-n-play solution. As standard, the ArmorStart offers
four inputs and two outputs to be used with sensors and actuators. The ArmorStart Distributed Motor Controller offers as standard, a local
at-motor disconnect means by incorporating the Bulletin 140M Motor Circuit Protector. This eliminates the need for additional components
that would otherwise be required in each motor branch circuit. The ArmorStart Distributed Motor Controllers are listed as suitable for Group
Motor installations.
4
5
ArmorStart Safety Version
The safety version of the ArmorStart provides a safety solution integrated into DeviceNet safety installations. The Bulletin 280/281 Safety
ArmorStart achieves Category 4 functionality by using redundant contactors. The Safety ArmorStart offers quick disconnects via the gland
plate to the 1732DS-IB8XOBV4 safety I/O module. The Bulletin 1732DS Guard Safety I/O inputs will monitor the status of the safety-rated
contactors inside the ArmorStart. The Bulletin 1732DS Guard Safety I/O outputs provide 24V DC power to the ArmorStart.
Note: The Bulletin 280/281 Safety ArmorStart is suitable for safety applications up to Safety Category 4 PLe (TÜV assessment per ISO
13849-1:2008). TÜV compliance letter is available upon request.
6
7
Note: For additional information regarding the 1732DS-IB8XOBV4 safety I/O module, see publication 1791DS-UM001*.
Fault Diagnostics
Mode of Operation
Full-Voltage Start
Fault diagnostics capabilities built in the ArmorStart Distributed
Motor Controller help you pinpoint a problem for easy
troubleshooting and quick re-starting.
Output Power Fuse Detection
Short Circuit
Overtemperature
Overload
Phase Imbalance
Phase Loss
DeviceNet Power Loss
Control Power Loss
EEPROM Fault
Control Power Fuse Detection
Hardware Fault
I/O Fault
This method is used in applications requiring across-the-line
starting. Full in-rush current and locked-rotor torque are realized.
The ArmorStart Bulletin 280 offers full-voltage starting, and the
Bulletin 281 offers full-voltage starting for reversing applications.
100%
Percent
9
10
DeviceLogix - Local logic control
Voltage
8
DeviceLogix provides local control over the device's discrete and
network I/O. It consists of function blocks, inputs, outputs, and
actual hardware data, including fault and status bits.
11
Time (seconds)
Motor Cable
A 3-meter unshielded, 4-conductor cordset is provided with every
ArmorStart Distributed Motor Controller.
Overload Protection
The Bulletin 280/281 ArmorStart Distributed Motor Controller
incorporates, as standard, electronic motor overload protection. This
overload protection is accomplished electronically with an I2t
algorithm. The ArmorStart’s overload protection is programmable via
the communication network, providing the user with flexibility. The
overload trip class can be selected for class 10, 15, or 20
protection. Ambient insensitivity is inherent in the electronic design
of the overload.
www.ab.com/catalogs
12
Factory-Installed Option
HOA Selector Keypad
13
The HOA Selector Keypad allows local start/stop control.
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-57
Bulletin 280D/281D
ArmorStart® Distributed Motor Controller — Safety Version
Catalog Number Explanation
Catalog Number Explanation
0
Examples given in this section are for reference purposes. This basic explanation should not be used for product selection; not all
combinations will produce a valid catalog number.
280
a
1
2
3
b
12S – 10
c
d
C – CR – Option 1
e
f
g
h
a
d
f
Bulletin Number
Contactor Size/Control Voltage
Overload Selection Current Range
Code
Description
Code
280
Full Voltage Starter
12S
281
Reversing Starter
23S
Description
24V DC
b
e
Communications
Short Circuit Protection
(Motor Circuit Protector)
Code
Description
D
DeviceNet™
c
4
D – F
Description
F
Type 4 (IP67)
Description
B
0.5…2.5 A
C
1.1…5.5 A
D
3.2…16 A
h
Option 1
Code
Description
Code
Description
10
10 A Rated Device
3
Hand/Off/Auto Selector Keypad
25
25 A Rated Device
3FR
Hand/Off/Auto Selector Keypad with
Forward/Reverse
Enclosure Type
Code
Code
g
Control and 3-Phase Power Connections/Motor Cable Connection
(CR: Conduit/Round Media) or (RR: Round/Round Media)
Description
5
Code
6
7
Control Power‡
3-Phase Power
Motor Cable
Conduit Entrance
3 m, unshielded cordset
male 90°
CR
blank
Round Media (Male
Receptacle)
CR
W1
Round Media (Male
Receptacle)
Conduit Entrance
No cable
RR
blank
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
3 m, unshielded cordset
male 90°
RR
W1
Round Media (Male
Receptacle)
Round Media (Male
Receptacle)
No cable
1 See Accessories on page 4-82 for extended motor cable lengths.
‡ Control power is provided by the Guard I/O Safety Module. Refer to accessories on page 4-79 for
proper media selction.
8
9
10
11
12
13
www.ab.com/catalogs
4-58
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280D/281D
ArmorStart Distributed Motor Controller — Safety Version
®
Product Selection/Options
Product Selection
DeviceNet Network Communications
0
Full-voltage starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 460V AC
kW
24V DC
Control Voltage
Hp
Current Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
0.5…2.5
0.37
0.75
0.5
0.5
1
280D-F12S-10B-CR
1.1…5.5
1.1
2.2
1
1
3
280D-F12S-10C-CR
3.2…16
4
7.5
3
5
10
280D-F23S-25D-CR
1
2
Full-voltage starters ⎯ IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Up to 460V AC
kW
24V DC
Control Voltage
Hp
Current Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
0.5…2.5
0.37
0.75
0.5
0.5
1
280D-F12S-10B-RR
1.1…5.5
1.1
2.2
1
1
3
280D-F12S-10C-RR
3.2…16
4
7.5
3
5
10
280D-F23S-25D-RR
Cat. No.
3
4
Reversing starters ⎯ IP67/NEMA Type 4 with conduit entrance, Up to 460V AC
kW
24V DC
Control Voltage
Hp
Current Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
Cat. No.
0.5…2.5
0.37
0.75
0.5
0.5
1
281D-F12S-10B-CR
1.1…5.5
1.1
2.2
1
1
3
281D-F12S-10C-CR
3.2…16
4
7.5
3
5
10
281D-F23S-25D-CR
5
6
Reversing starters ⎯ IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Up to 460V AC
kW
24V DC
Control Voltage
Hp
Current Rating [A]
230V AC
50 Hz
400V AC
50 Hz
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
0.5…2.5
0.37
0.75
0.5
0.5
1
281D-F12S-10B-RR
1.1…5.5
1.1
2.2
1
1
3
281D-F12S-10C-RR
3.2…16
4
7.5
3
5
10
281D-F23S-25D-RR
Cat. No.
7
8
9
Options – Factory Installed
Description
Cat. No. Modification
10
Hand/Off/Auto Selector Keypad (Bulletin 280)
-3
11
Hand/Off/Auto Selector Keypad with Forward/Reverse Function
(Bulletin 281)
-3FR
Supplied ArmorStart without motor cable
-CRW
ArmorConnect Power Media Connectivity, ArmorStart supplied
without motor cable
-RRW
www.ab.com/catalogs
12
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-59
Bulletin 280D/281D
ArmorStart® Distributed Motor Controller — Safety Version
Specifications
ArmorStart Receptacle Pin Outs
0
Receptacle Connections for Output, DeviceNet or
ArmorPoint Version (M12)
1
Receptacle Connections for DeviceNet Connector
Pin
Pin
Pin
Pin
Pin
Pin 1: PE
Pin 2: Return
Pin 3: Relay out
1:
2:
3:
4:
5:
Drain (no connection)
+VDNET
-VDNET
CAN_H
CAN_L
2
3
Receptacle Connections for Motor Connector 3 Hp or less (M22)
Pin
Pin
Pin
Pin
4
1:
2:
3:
4:
Receptacle Connections for Input (M12)
Pin
Pin
Pin
Pin
Pin
T1 (black)
T2 (white)
T3 (red)
Ground (green/yellow)
1:
2:
3:
4:
5:
+24V (A3 or DNET)
Input 0
Common
Input 1
NC (no connection)
5
Receptacle Connections for Incoming 3-phase Power 10 A Short Circuit Protection (M22)
Receptacle Connections for Motor Connector 10 Hp or greater (M35)
6
Pin
Pin
Pin
Pin
7
1:
2:
3:
4:
Pin
Pin
Pin
Pin
T1 (black)
Ground (green/yellow)
T3 (red)
T2 (white)
1:
2:
3:
4:
L1 (black)
L2 (white)
L3 (red)
Ground (green/yellow)
8
Receptacle Connections for Safety Monitor Outputs to
Bulletin 1732DS-* (SM1/SM2) (M12)
Receptacle Connections for Incoming 3-phase Power 25 A Short Circuit Protection (M35)
9
Pin
Pin
Pin
Pin
10
11
1:
2:
3:
4:
Pin
Pin
Pin
Pin
ArmorStart SM1 (brown)
ArmorStart SM2 (white)
Not used
Not used
Receptacle Connections for Safety (Bulletin 1732DS)
Power (A1/A2) (M12)
12
Pin
Pin
Pin
Pin
1:
2:
3:
4:
ArmorStart
ArmorStart
ArmorStart
ArmorStart
A1 (brown)
P (white)
A2 (blue)
M (black)
13
www.ab.com/catalogs
4-60
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
1:
2:
3:
4:
L1 (black)
Ground (green/yellow)
L3 (red)
L2 (white)
Bulletin 280D/281D
ArmorStart Distributed Motor Controller — Safety Version
®
Specifications
Connections
Bulletin 280D/281D Safety ArmorStart with DeviceNet Communications
0
1
Local Disconnect
LED Status
Indication
2
2 Outputs
(Micro/M12)
4 Inputs
(Micro/M12)
3
Motor Connection
DeviceNet
Connection
(Mini/M18)
4
Ground Terminal
A1/A2 - 24V DC Control Power from
Bul. 1732DS Guard Safety I/O Module output
Safety Monitor input from
Bul. 1732DS Guard Safety I/O Module input
5
Overload Curves
Class 15
Approximate Trip Time [s]
Approximate Trip Time [s]
Class 10
Cold
Hot
6
7
Cold
Hot
8
9
% Full Load Current
% Full Load Current
10
Approximate Trip Time [s]
Class 20
11
Cold
Hot
12
13
% Full Load Current
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-61
Bulletin 280D/281D
ArmorStart® Distributed Motor Controller — Safety Version
Specifications
Electrical Ratings
Rated Operation Voltage
0
UL/NEMA
IEC
380Y/220…480Y/277V AC
380Y/220…480Y/277V AC
Rate Insulation Voltage
600V
Rated Impulsed Voltage
4 kV
Dielectric Withstand
1
2200V AC
2500V AC
Operating Frequency
Power Circuit
50/60 Hz
Utilization Category
—
Protection Against Shock
—
IP2X
280D/281D-___-10B-*
2.5 A
280D/281D-___-10C-*
5.5 A
280D/281D-___-10D-*
16 A
Rated Operating Current Max.
2
Rated Operation Voltage
AC-3
24V DC (+10%, -15%) A2 (should be grounded at voltage source)
Rate Insulation Voltage
Control Circuit
3
250V
Rated Impulsed Voltage
—
4 kV
Dielectric Withstand
1500V AC
2000V AC
Overvoltage Category
—
III
Operating Frequency
4
Short Circuit Protection
50/60 Hz
Current Rating
SCPD Performance
Type 1
Sym. Amps RMS @
480Y/277V
0.5…2.5 A
65 kA
1.1…5.5 A
3.2…16 A
30 kA
SCPD List
Size per NFPA 70 (NEC) or NFPA 79 for Group Motor Applications
Power Requirements
5
Units
Control Voltage
6
Without HOA
With HOA
Volts
24V DC
Contactor (Pick Up)
Amps
1.09
Contactor (Hold In)
Amps
0.30
Total Control Power (Pick Up)
VA (W)
(26 W)
Total Control Power (Hold In)
VA (W)
(7.2 W)
External Devices powered by Control Voltage
7
Outputs (2) (1 A max. each)
Amps
2
2
Total Control (Pick Up) with max outputs
VA (W)
(65 W)
(73 W)
Total Control (Hold In) with max outputs
VA (W)
(50 W)
(58 W)
Input Ratings
8
Rated Operation Voltage
24V DC
Input On-State Voltage Range
10…26V DC
3.0 mA @ 10V DC
Input On-State Current
7.2 mA @ 24V DC
Input Off-State Voltage Range
0…5V DC
Input Off-State Current
<1.5 mA
Input Filter — Software Selectable
9
Off to On
Settable from 0…64 ms in 1 ms increments
On to Off
Settable from 0…64 ms in 1 ms increments
Input Compatibility
N/A
IEC 1+
Number of Inputs
10
4
Sensor Source
Output Ratings (Sourced from Control
Circuit)
11
Voltage Status Only
11…25V DC from DeviceNet
Current Available
50 mA max. per input, 200 mA total
Rated Operation Voltage
240V AC/30V DC
Rate Insulation Voltage
250V
250V
Dielectric Withstand
1500V AC
2000V AC
Operating Frequency
50/60 Hz
Type of Control Circuit
12
240V AC/30V DC
50/60 Hz
Electromechanical relay
Type of Current
AC/DC
Conventional Thermal Current Ith
Total of both outputs ≤ 2 A
Type of Contacts
Normally open (N.O.)
Number of Contacts
2
13
www.ab.com/catalogs
4-62
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280D/281D
ArmorStart Distributed Motor Controller — Safety Version
®
Specifications
UL/NEMA
Environmental
IEC
Operating Temperature Range
-20…+40 °C (-4…+104 °F)
Storage and Transportation
Temperature Range
–25….+85 °C (–13…+185 °F)
Altitude
2000 m
Humidity
5…95% (non-condensing)
Pollution Degree
0
1
3
Enclosure Ratings
NEMA 4/12/13
IP67
Approximate Shipping Weight
6.8 kg (15 lb)
Resistance to Shock
Operational
15 G
Non-Operational
30 G
2
Resistance to Vibration
Operational
1 G, 0.15 mm (0.006 in.) displacement
Non-Operational
2.5 G, 0.38 mm (0.015 in.) displacement
3
Power and Ground Terminals
Mechanical
Wire Size
Primary terminal:
(#16 …#10 AWG)
Secondary terminal:
(#18 …#10 AWG)
Primary terminal:
1.5…5.3 mm2
Secondary terminal:
0.8…5.3 mm2
Tightening Torque
Primary terminal: 10.8 lb•in
Secondary terminal: 4.5 lb•in
Primary Terminal: 1.2 N•m
Secondary terminal: 0.5 N•m
Wire Strip Length
0.35 in. (9 mm)
Disconnect Lock Out
Maximum of 5/16 in. (8 mm) lock shackle or hasp. The hasp should not exceed
5/16 in. (8 mm) when closed, or damage will occur to the disconnect guard.
4
5
EMC Emission Levels
Conducted Radio Frequency
Emissions
Class A
Radiated Emissions
Class A
EMC Immunity Levels
Electrostatic Discharge
4 kV contact and 8 kV Air
Radio Frequency Electromagnetic Field
10V/m
Fast Transient
6
2 kV
1 kV
Surge Transient
L-L,
2 kV
L-N
(earth)
7
Overload Characteristics
Overload Current Range
280D/281D-___-10B-*
0.5…2.5 A
280D/281D-___-10C-*
1.1…5.5 A
280D/281D-___-10D-*
3.2…16 A
Trip Classes
10, 15, 20
Trip Rating
120% of FLC setting
Number of poles
8
3
DeviceNet Specifications
Other Rating
DeviceNet Supply Voltage Rating
Range 11…25V DC, 24V DC nominal
9
167 mA @ 24V DC - 4.0 W
DeviceNet Input Current
364 mA @ 11V DC - 4.0 W
External Devices powered by
DeviceNet
Sensors inputs 4 x 50 mA - total 200 mA
Total w/max Sensor Inputs (4)
367 mA @ 24V DC - 8.8 W
DeviceNet Input Current Surge
15 A for 250 μs
10
DeviceNet Communications
Baud Rates
125, 250, 500 kbps
500 m (1630 ft) @ 125 kbps
Distance Maximum
11
200 m (656 ft) @ 250 kbps
100 m (328 ft) @ 500 kbps
Certifications
cULus (File No. E3125, Guides NLDX, NLDX7)
UL 508
CSA C22.2, No. 14
EN/IEC 60947-4, EN/IEC 60947-4-1
CE Marked per Low Voltage Directive 2006/95/EC and EMC Directive
2004/108/ECC
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-63
Bulletin 280D/281D
ArmorStart® Distributed Motor Controller — Safety Version
Approximate Dimensions
0
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
Dimensions for Bulletin 280D Safety Product with Conduit Entrance
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-64
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280D/281D
ArmorStart Distributed Motor Controller — Safety Version
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for Bulletin 280D Safety with ArmorConnect Connectivity
1
2
3
4
10 A short circuit protection rating
5
25 A short circuit protection rating
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-65
Bulletin 280D/281D
ArmorStart® Distributed Motor Controller — Safety Version
Approximate Dimensions
Dimensions for Bulletin 281D Safety Product with Conduit Entrance
0
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-66
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280D/281D
ArmorStart Distributed Motor Controller — Safety Version
®
Approximate Dimensions
Dimensions for Bulletin 281D Safety Product with ArmorConnect Connectivity
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
1
2
3
4
10 A short circuit protection rating
25 A short circuit protection rating
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-67
Bulletin 284D
ArmorStart® Distributed Motor Controller — Safety Version
Product Overview/Description
0
1
2
3
Bulletin 284D ArmorStart Distributed Motor Controller Safety Version
Table of Contents
On-Machine starting solution
Variable frequency AC drive using PowerFlex® technology
Horsepower range 0.5…5 Hp (0.4…3.3 kW)
Robust IP67/NEMA Type 4 enclosure rating
Quick disconnect connections for I/O, communications, motor, and
three-phase power
LED status indication
DeviceNet communications
Local logic control via DeviceLogix technology
Peer-to-peer communications (ZIP)
Factory-installed options:
− EMI filter
− Shielded motor cable
− Hand/Off/Auto (HOA) keypad
− Output contactor
configuration
Product Selection ...... 4-70
Options .......................... 4-70
Accessories.................. 4-79
Specifications.............. 4-71
Approximate
Dimensions................... 4-76
Standards Compliance
UL 508C
CSA C22.2, No. 14
EN/IEC 60947-4-2, EN 50178,
EN 61800-3
CE Marked per Low Voltage
Directive 2006/95/EC and EMC
Directive 2004/108/EC
CCC
Certifications
cULus (File No. E207834,
Guide NMMS, NMMS7)
4
Description
5
6
7
The Bulletin 284 ArmorStart Distributed Motor Controller is an integrated, pre-engineered, starter for variable frequency AC drive applications.
Its modular design offers simplicity in wiring using quick disconnects for the I/O, communications, and motor connection. Optional quick
disconnects for control and three-phase power, fully integrates the plug-n-play solution. As standard, the ArmorStart offers four inputs and
two outputs to be used with sensors and actuators. The ArmorStart Distributed Motor Controller offers, as standard, a local at-motor
disconnect means by incorporating the Bulletin 140M Motor Circuit Protector. This eliminates the need for additional components that would
otherwise be required in each motor branch circuit. The ArmorStart Distributed Motor Controllers are listed as suitable for Group Motor
installations.
ArmorStart Safety Version
The safety version of the ArmorStart provides a safety solution integrated into DeviceNet safety installations. The Bulletin 284 Safety
ArmorStart achieves Category 4 functionality by using redundant contactors. The Safety ArmorStart offers quick disconnects via the gland
plate to the 1732DS-IB8XOBV4 safety I/O module. The Bulletin 1732DS Guard Safety I/O inputs will monitor the status of the safety-rated
contactors inside the ArmorStart. The Bulletin 1732DS Guard Safety I/O outputs provide 24V DC power to the ArmorStart.
Note: The Bulletin 284 Safety ArmorStart is suitable for safety applications up to Safety Category 4 PLe (TÜV assessment per ISO 138491:2008). TÜV compliance letter is available upon request.
Note: For additional information regarding the 1732DS-IB8XOBV4 safety I/O module, see publication 1791DS-UM001*.
8
Mode of Operation
Sensorless Vector Control (SVC)
Overload Protection
Sensorless vector control provides exceptional speed regulation and
very high levels of torque across the entire speed range of the drive.
9
Torque (Per-Unit)
10
3 Hp - High Speed
11
12
Fault Diagnostics
Frequency (Hz)
The Autotune feature allows the Bulletin 284 (SVC) to adapt to
individual motor characteristics.
Timer, Counter, Basic Logic and StepLogic™ functions can
reduce hardware design costs and simplify control schemes.
13
The Bulletin 284 ArmorStart Distributed Motor Controller
incorporates, as standard, electronic motor overload protection. This
overload protection is accomplished electronically with an I2t
algorithm. The ArmorStart’s overload protection is programmable via
the communication network providing the user with flexibility. The
overload trip class allows for class 10 overload protection. Ambient
insensitivity is inherent in the electronic design of the overload.
Fault diagnostics capabilities built into the Bulletin 284 ArmorStart
Distributed Motor Controller help you pinpoint a problem for easy
troubleshooting and quick re-starting.
Short Circuit
Overtemperature
Overload
Output Fuse Protection
Phase Short
DeviceNet Power Loss
Ground Fault
Internal Communication Fault
Stall
DC Bus Fault
Control Power Loss
EEPROM Fault
Control Power Fuse Protection Hardware Fault
I/O Fault
Restart Retries
Overcurrent
Miscellaneous Fault
Brake Fuse Protection
Develops high torque over a wide speed range and adapts to
individual motor characteristics.
www.ab.com/catalogs
4-68
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284D
ArmorStart Distributed Motor Controller — Safety Version
®
Factory-Installed Options/Cat. No. Explanation
Motor Cable
Factory-Installed Options
With every Bulletin 284 ArmorStart Distributed Motor Controller, a
3–meter unshielded 4-conductor cordset is provided with each unit
as standard. If the optional EMI filter is selected, a 3–meter shielded
4-conductor cordset is provided as standard.
HOA Selector Keypad with Jog Function
The HOA Selector Keypad with Jog Function allows local start/stop
control with capabilities to JOG and to Forward/Reverse motor
direction.
Local Logic via DeviceLogix
EMI Filter
Provides local control over the device’s discrete and network I/O.
DeviceLogix consists of function blocks, inputs, outputs, and actual
hardware data, including fault and status bits.
The EMI Filter is required to be CE compliant. When selected, a
3–meter shielded 4–conductor motor cordset is provided as
standard. This is only available with sensorless vector control.
Source Brake Contactor
0
1
Shielded Motor Cable
An internal contactor is used to switch an electromechanical motor
brake On/Off. The motor brake is powered from the line power
circuit. The configuration of the R1 relay controls the function of the
brake. A customer accessible 3 A fuse is provided to protect the
brake cable. Included as standard, is a 3-meter 3-pin cordset for
connection to the motor brake.
A 3-meter shielded 4-conductor cordset is provided instead of the
3-meter unshielded 4-conductor cordset, when the EMI Filter is
selected.
2
3
IP67 Dynamic Brake Connector
The IP67 Dynamic Brake Resistor design offers simplicity in wiring
and installation. The DB1 option must be selected in order to have
the quick disconnect connectivity. See accessories on page 4-85 for
available IP67 Dynamic Brake Resistors.
4
Catalog Number Explanation
Examples given in this section are for reference purposes. This basic explanation should not be used for product selection; not all
combinations will produce a valid catalog number.
284 D – F
a
b
5
V D2P3 S – 10 – CR – Option 1 – Option 2 – Option 3
c
d
e
f
g
h
i
j
Option 1
Output Current
Bulletin Number
Code
Description
Code
Description
284
VFD Starter
D1P4
1.4 A, 0.4 kW, 0.5 Hp
D2P3
2.3 A, 0.75 kW, 1.0 Hp
D4P0
4.0 A, 1.5 kW, 2.0 Hp
D6P0
6.0 A, 2.2 kW, 3.0 Hp
D7P6
7.6 A, 3.3 kW, 5.0 Hp
b
Communications
Code
Description
D
DeviceNet
f
c
Code
Description
3
Hand/Off/Auto Selector Keypad with Jog
Function
Code
Code
Description
F
Type 4 (IP67)
S
j
Code
SB
Description
W1
d
No Source Brake contactor cable
Description
k
24V DC
Option 3
g
7
Option 2
Control Voltage
Enclosure Type
6
i
e
a
k
Code
Description
EMI
EMI Filter
8
9
Short Circuit Protection (Motor Circuit
Protector)
Torque Performance Mode
Code
Description
Code
Description
V
Sensorless Vector Control and Volts per
Hertz
10
10 A Rated Device
25
25 A Rated Device
10
h
Control and 3-Phase Power Connections / Motor Cable Connection
(CR: Conduit/Round Media) or (RR: Round/Round Media)
11
Description
Code
CR
blank
Control Power‡
3-Phase Power
Motor Cable
Round Media (Male Receptacle)
Conduit Entrance
3 m, unshielded cordset male 90°
3 m, shielded cordset male 90°
CR
N
Round Media (Male Receptacle)
Conduit Entrance
CR
W1
Round Media (Male Receptacle)
Conduit Entrance
No cable
RR
blank
Round Media (Male Receptacle)
Round Media (Male Receptacle)
3 m, unshielded cordset male 90°
RR
N
Round Media (Male Receptacle)
Round Media (Male Receptacle)
3 m, shielded cordset male 90°
RR
W1
Round Media (Male Receptacle)
Round Media (Male Receptacle)
No cable
12
13
1 See Accessories on page 4-82 for extended motor and brake cable lengths.
‡ Control power is provided by the Guard I/O Safety Module. Refer to accessories on page 4-79 for proper media selction.
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-69
Bulletin 284D
ArmorStart® Distributed Motor Controller — Safety Version
Product Selection/Options
0
Product Selection
DeviceNet Network Communication
IP67/NEMA Type 4 with conduit entrance, Sensorless Vector Control, and Volts per Hertz torque performance, Up to 480V
AC
24V DC
Control Voltage
1
2
3
Input Voltage
380…480V, 50/60 Hz
3-Phase
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
Cat. No.
0.4
0.5
1.4
284D-FVD1P4S-10-CR-DB1-SB
0.75
1
2.3
284D-FVD2P3S-10-CR-DB1-SB
1.5
2
4
284D-FVD4P0S-10-CR-DB1-SB
2.2
3
6
284D-FVD6P0S-25-CR-DB1-SB
3
5
7.6
284D-FVD7P6S-25-CR-DB1-SB
IP67/NEMA Type 4 with quick disconnects for ArmorConnect power media, Sensorless Vector Control, and Volts per Hertz
torque performance, Up to 480V AC
24V DC
Control Voltage
Input Voltage
4
380…480V, 50/60 Hz
3-Phase
5
3-Phase kW Rating
3-Phase Hp Rating
Output Current [A]
Cat. No.
0.4
0.5
1.4
284D-FVD1P4S-10-RR-DB1-SB
0.75
1
2.3
284D-FVD2P3S-10-RR-DB1-SB
1.5
2
4
284D-FVD4P0S-10-RR-DB1-SB
2.2
3
6
284D-FVD6P0S-25-RR-DB1-SB
3
5
7.6
284D-FVD7P6S-25-RR-DB1-SB
6
Options – Factory Installed
Description
Cat. No. Modification
7
Hand/Off/Auto Selector and Jog Keypad
8
EMI Filter
-EMI
Shielded motor cable
-CRN
Supplied without motor cable
-CRW
Source brake supplied with cable
9
Source brake supplied without cable
10
-SB
-SBW
Dynamic Brake Connector (IP67 brake)
-DB1
ArmorConnect Power Media Connectivity, ArmorStart supplied
with shielded motor cable
-RRN
ArmorConnect Power Media Connectivity, ArmorStart supplied
without motor cable
-RRW
11
12
13
www.ab.com/catalogs
4-70
-3
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284D
ArmorStart Distributed Motor Controller — Safety Version
®
Specifications
ArmorStart Receptacle Pin Outs
Receptacle Connections for DeviceNet Connector
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
0
Receptacle Connections for Motor Connector (M22)
Drain (no connection)
+VDNET
-VDNET
CAN_H
CAN_L
Pin
Pin
Pin
Pin
1:
2:
3:
4:
1
T1 (black)
T2 (white)
T3 (red)
Ground (green/yellow)
2
Receptacle Connections for Incoming 3-phase Power 10 A Short Circuit Protection (M22)
Receptacle Connections for Input (M12)
3
Pin
Pin
Pin
Pin
Pin
1:
2:
3:
4:
5:
+24V (A3 or DNET)
Input 0
Common
Input 1
NC (no connection)
Receptacle Connections for Output, DeviceNet or
ArmorPoint Version (M12)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
L1 (black)
L2 (white)
L3 (red)
Ground (green/yellow)
4
Receptacle Connections for Incoming 3-phase Power 25 A Short Circuit Protection (M35)
5
6
Pin 1: PE
Pin 2: Return
Pin 3: Relay out
Pin
Pin
Pin
Pin
1:
2:
3:
4:
L1 (black)
Ground (green/yellow)
L3 (red)
L2 (white)
7
Receptacle Connections for Dynamic Brake (M22)
Receptacle Connections for Safety Monitor Outputs to
Bulletin 1732DS-* (SM1/SM2) (M12)
Pin 1: GND (green/yellow)
Pin 2: BR+ (black)
Pin 3: BR- (white)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
8
9
ArmorStart SM1 (brown)
ArmorStart SM2 (white)
Not used
Not used
10
Receptacle Connections for Source or Control Brake
Receptacle Connections for Safety (Bulletin 1732DS)
Power (A1/A2) (M12)
Pin 1: L1 (black)
Pin 2: GND (green/yellow)
Pin 3: L2 (white)
Pin
Pin
Pin
Pin
1:
2:
3:
4:
ArmorStart
ArmorStart
ArmorStart
ArmorStart
11
A1 (brown)
P (white)
A2 (blue)
M (black)
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-71
Bulletin 284D
ArmorStart® Distributed Motor Controller — Safety Version
Specifications
Bulletin 284D Safety ArmorStart with DeviceNet Communications
0
Local Disconnect
1
LED Status
Indication
2 Outputs
(Micro/M12)
2
4 Inputs
(Micro/M12)
3
Motor Connection
DeviceNet
Connection
(Mini/M18)
Ground Terminal
4
5
Safety Monitor input from
Bul. 1732DS Guard Safety I/O Module input
A1/A2 - 24V DC Control Power from
Bul. 1732DS Guard Safety I/O Module output
Motor Overload Trip Curves
80
60
40
20
0
0
25 50 75 100 125 150 175 200
% of P132 [Motor NP Hertz]
Min Derate
100
80
60
40
20
0
0
25 50 75 100 125 150 175 200
% of P132 [Motor NP Hertz]
% of P133 [Motor OL Curent]
7
No Derate
100
% of P133 [Motor OL Curent]
6
% of P133 [Motor OL Curent]
Motor overload current parameter provides class 10 overload protection. Ambient insensitivity is inherent in the electronic design of the
overload.
Max Derate
100
80
60
40
20
0
0
25 50 75 100 125 150 175 200
% of P132 [Motor NP Hertz]
8
9
10
11
12
13
www.ab.com/catalogs
4-72
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284D
ArmorStart Distributed Motor Controller — Safety Version
®
Specifications
Electrical Ratings
UL/NEMA
IEC
Rated Operation Voltage
200…575V
200…500V
Rate Insulation Voltage
600V
600V
Rated Impulsed Voltage
6 kV
6 kV
Dielectric Withstand
2200V AC
2500V AC
Operating Frequency
50/60 Hz
50/60 Hz
Utilization Category
N/A
AC-3
Protection Against Shock
N/A
IP2X
Power Circuit
Rated Operation Voltage
Control Circuit
Short Circuit
Protection
1
24V DC (+10%, -15%) A2 (should be grounded at voltage source)
Rate Insulation Voltage
250V
Rated Impulsed Voltage
—
4 kV
Dielectric Withstand
1500V AC
2000V AC
Overvoltage Category
—
III
Operating Frequency
50/60 Hz
SCPD Performance Type 1
250V
2
Current Rating
Voltage
480Y/277V
480/480V
600Y/347V
600V
10 A
Sym. Amps
RMS
65 kA
65 kA
30 kA
30 kA
30 kA
30 kA
30 kA
30 kA
25 A
SCPD List
3
Size per NFPA 70 (NEC) or NFPA 79 for Group Motor Applications
UL/NEMA
Environmental
0
IEC
Operating Temperature Range
-20…+40 °C (-4…+104 °F)
Storage and Transportation
Temperature Range
–25….+85 °C (–13…+185 °F)
Altitude
1000 m
Humidity
5…95% (non-condensing)
Pollution Degree
3
Enclosure Ratings
4
5
NEMA 4/12/13
IP67
Approximate Shipping Weight
13.6 kg (30 lb)
Resistance to Shock
Operational
15 G
Non-Operational
30 G
6
Resistance to Vibration
Mechanical
Operational
1 G, 0.15 mm (0.006 in.) displacement
Non-Operational
2.5 G, 0.38 mm (0.015 in.) displacement
Wire Size
Primary/Secondary terminal:
(16 …10 AWG)
Primary/Secondary terminal:
1.5…4.0 mm2
Tightening Torque
Primary terminal:
10.8 lb•in
Secondary terminal:
4.5 lb•in
Primary terminal:
(1.2 N•m)
Secondary terminal:
(0.5 N•m)
Wire Strip Length
7
8
0.35 in. (9 mm)
Control and Safety Monitor Inputs
EMC Emission Levels
Wire Size
(18…10 AWG)
Tightening Torque
6.2 lb•in
1.0…4.0 mm2
9
0.7 N•m
Wire Strip Length
0.35 in. (9 mm)
Disconnect Lock Out
Maximum of 5/16 in. (8 mm) lock shackle or hasp. The hasp should not exceed
5/16 in. (8 mm) when closed, or damage will occur to disconnect guard.
Conducted Radio Frequency
Emissions
10V rms Communication cables
10V rms (PE)
150 KHz…80 MHz
Radiated Emissions
Class A
Electrostatic Discharge
4 kV contact and 8 kV Air
Radio Frequency Electromagnetic Field
10V/m, 80 KHz…1 GHz
3V/m, 1.4 GHz…2.0 GHz
1V/m, 2.0 GHz…2.7 GHz
Fast Transient
2 kV (Power)
2 kV (PE)
1 kV (Communications and control)
EMC Immunity Levels
1 kV (12)
Surge Transient
L-L,
2 kV (2)
L-N
10
11
12
(earth)
UL 508C; CSA C22.2, No. 14; EN50178; EN61800-3; EN/IEC 60947-4-2; CE
Marked per Low Voltage 2006/95/EC; EMC Directive 2004/108/EC; CCC; ODVA
for DeviceNet
Standards Compliance
Certifications
cULus (File No. E207834, Guide NMMS, NMMS7)
www.ab.com/catalogs
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-73
Bulletin 284D
ArmorStart® Distributed Motor Controller — Safety Version
Specifications
UL/NEMA
IEC
Rated Operation Voltage
0
24V DC
Input On-State Voltage Range
10…26V DC
3.0 mA @ 10V DC
Input On-State Current
7.2 mA @ 24V DC
Input Off-State Voltage Range
1
0…5V DC
Input Off-State Current
<1.5 mA
Input Filter — Software Selectable
Input Ratings
Off to On
Settable from 0…64 ms in 1 ms increments
On to Off
Settable from 0…64 ms in 1 ms increments
Input Compatibility
2
N/A
IEC 1+
Number of Inputs
4
Sensor Source
3
4
Output Ratings
Sourced from control circuit - A1/A2
5
6
7
8
Voltage Status Only
11…25V DC from DeviceNet
Current Available
50 mA max. per input, 200 mA total
Rated Operation Voltage
240V AC/30V DC
Rate Insulation Voltage
250V
240V AC/30V DC
250V
Dielectric Withstand
1500V AC
2000V AC
Operating Frequency
50/60 Hz
Type of Control Circuit
Electromechanical relay
Type of Current
AC/DC
Conventional Thermal Current Ith
Total of both outputs ≤ 2 A
Type of Contacts
Normally open (N.O.)
Number of Contacts
2
DeviceNet Supply Voltage Rating
Range 11…25V DC, 24V DC nominal
DeviceNet Input Current
167 mA @ 24V DC - 4.0 W
DeviceNet Input Current
364 mA @ 11V DC - 4.0 W
External Devices powered by
DeviceNet
Sensors inputs 4 x 50 mA - total 200 mA
Total w/max Sensor Inputs (4)
367 mA @ 24V DC - 8.8 W
DeviceNet Specifications
DeviceNet Communications
DeviceNet Input Current Surge
15 A for 250 μs
Baud Rates
125, 250, 500 kbps
Distance Maximum
500 m (1630 ft) @ 125 kbps
Distance Maximum
200 m (656 ft) @ 250 kbps
Distance Maximum
100 m (328 ft) @ 500 kbps
Drive Characteristics
Sensorless Vector Control
Maximum Hp (kW)/Input Voltage
5 Hp (3.3 kW)/480V AC
Overload Capacity
150% for 60 seconds, 200% for 3 seconds
Output Frequency (programmable)
0…400 Hz
Efficiency (typical)
9
97.5%
Preset Speeds
8
Carrier Frequency
2…16 kHz
Skip Frequency
(PID)
Process Control Loop
10
StepLogic Functionality
Timer/Counter Functions
Drive Ratings — VFD Output Current vs. Input Current
11
Line Frequency
Voltage
[Hz]
380
50
12
460
13
60
3-Phase kW
Rating
3-Phase Hp
Rating
Output Current [A]
Input Current [A]
Sensorless Vector Control
Sensorless Vector Control
0.4
⎯
1.4
2.15
0.75
⎯
2.3
3.80
1.5
⎯
4.0
6.40
2.2
⎯
6.0
9.00
3.0
7.6
12.40
⎯
⎯
0.5
1.4
1.85
⎯
1
2.3
3.45
⎯
2
4.0
5.57
⎯
3
6.0
8.20
⎯
5
7.6
12.5
www.ab.com/catalogs
4-74
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284D
ArmorStart Distributed Motor Controller — Safety Version
®
Specifications
Protective Specifications — Sensorless Vector Control
Motor Protection
I2t overload protection — 150% for 60 seconds, 200% for 3 seconds (provides Class 10 protection)
Overcurrent
200% hardware limit, 300% instantaneous fault
Overvoltage
380…460V AC Input — Trip occurs @ 810V DC bus voltage (equivalent to 575V AC incoming line)
Undervoltage
380…480V AC Input — Trip occurs @ 390V DC bus voltage (equivalent to 275V AC incoming line)
Faultless Power Ride Through
100 milliseconds
1
Control Specifications — Sensorless Vector Control
Carrier Frequency
2…16 kHz drive rating based on 4 kHz
Frequency Accuracy
Digital Input
within ±0.05% of set output frequency
Speed Regulation (open loop with slip
compensation)
Stop Modes
0
2
±1% of base speed across a 60:1 speed range
Multiple programmable stop modes including: Ramp, Coast, DC-Brake, Ramp-to-Hold, and S Curve
Acceleration/Deceleration
Two independently programmable acceleration and deceleration times: each time may be programmed
from 0…600 seconds in 0.1 second increments
Intermittent Overload
3
150% overload capability for up to 1 minute, 200% overload capability for up to 3 seconds
Electronic Motor Overload Protection
Class 10 protection with speed sensitive response
Sensorless Vector Control (SVC) Minimum DB Resistance
Drive Rating
Input Voltage
480V, 50/60 Hz,
Three-Phase
Minimum DB Resistance
[kW]
[Hp]
[Ω]
0.4
0.5
97
0.75
1
97
1.5
2
97
2.2
3
97
4.0
5
77
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-75
Bulletin 284D
ArmorStart® Distributed Motor Controller — Safety Version
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for Safety Product with Conduit Entrance
420.38 [16.55] (1 Hp or less @ 230V AC, 2 Hp or less @ 460…575V AC)
444.38 [17.5] (2 Hp @ 230V AC, 3 Hp or greater @ 460…575V AC)
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-76
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 284D
ArmorStart Distributed Motor Controller — Safety Version
®
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
0
Dimensions for Safety Product, 2 Hp and below @ 460V AC, NEMA Type 4 with ArmorConnect™ Connectivity
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-77
Bulletin 284D
ArmorStart® Distributed Motor Controller — Safety Version
Approximate Dimensions
0
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
Dimensions for Safety Product, 3 Hp and above @ 460V AC, IP67/NEMA Type 4 with ArmorConnect Connectivity
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-78
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281, 283, 284
ArmorStart Distributed Motor Controller
®
Accessories
DeviceNet Media ♣
Description
Length [m (ft)]
Cat. No.
1 (3.3)
1485P-P1E4-B1-N5
2 (6.5)
1485P-P1E4-B2-N5
3 (9.8)
1485P-P1E4-B3-N5
6 (19.8)
1485P-P1E4-B6-N5
Left Keyway
1485P-P1N5-MN5KM
Right Keyway
1485P-P1N5-MN5NF
Connector
Cat. No.
Mini Straight Female
Mini Straight Male
1485G-PN5-M5
Mini Straight Female
Mini Right Angle Male
1485G-PW5-N5
Mini Right Angle Female
Mini Straight Male
1485G-PM5-Z5
Mini Right Angle Female
Mini Straight Male
1485G-PW5-Z5
Mini Straight Female
Mini Straight Male
1485C-P‡N5-M5
Mini Straight Female
Mini Right Angle Male
1485C-P‡W5-N5
Mini Right Angle Female
Mini Straight Male
1485C-P‡M5-Z5
Mini Right Angle Female
Mini Straight Male
1485C-P‡W5-Z5
0
Sealed
KwikLink pigtail drops are Insulation Displacement
Connector (IDC) with integral Class 1 round cables
for interfacing devices or power supplies to flat
cable
DeviceNet Mini- T-Port Tap
1
2
3
Description
Gray PVC Thin Cable
Thick Cable
Description
Length m (ft)
Cat. No.
DeviceNet Configuration Terminal
Used to interface with objects on a DeviceNet
network. Includes 1 m communications cable.
1 (3.3)
193-DNCT
Communication cable, color-coded bare leads
1 (3.3)
193-CB1
Communication cable, microconnector (male)
1 (3.3)
193-CM1
⎯
193-DNCT-BZ1
4
5
6
7
8
Panel Mount Adapter/Door Mount Bezel Kit
♣ See On-Machine Connectivity Catalog for complete cable selection information.
Replace symbol with desired length in meters (Example: 1485G-P1N5-M5 for a 1 m cable). Standard cable lengths: 1, 2, 3, 4, 5, and 6 m.
‡ Replace symbol with desired length in meters (Example: 1485C-P1N5-M5 for a 1 m cable). Standard cable lengths: 1, 2, 3, 4, 5, 6, 8, 10, 12, 18, 24, and 30 m.
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-79
Bulletin 280E/281E, 284E
ArmorStart® Distributed Motor Controller
Accessories
Industrial EtherNet Media♣
0
Unshielded
Description
Connector Type
Cat. No.
M12, D-Code Patchcords and Cordsets
1
Straight male to straight male
1585D-M4TBDM-1
Straight male to right angle male
1585D-M4TBDE-1
Right angle male to right angle male
1585D-E4TBDE-1
Straight male to straight female
1585D-M4TBDF-1
2
3
4
5
Front Mount Receptacle
6
1585D-D4TBJM-1
Front mount female to RJ45
7
Transition Cable
8
9
1585D-M4TBJM-1
Straight male to RJ45
Description
Conductors
Jacket Material
Cable Type
Jacket Color
Cat. No.
Teal
1585J-M8PBJM-1
Teal
1585J-M8TBJM-1
RJ45 Patchcords
Riser PVC
10
4-pair
High-flex TPE
Unshielded twisted pair
M12 to RJ45 Bulkhead Adapter
11
12
Transition from IP20 environment to IP67 environment
In-cabinet connectivity with RJ45 connector providing On-Machine solution with M12 D Code
connector
Differential 100 Ω terminators used for unused pairs
Cat 5e
1 Lengths available in 0.3, 0.6, 1, 2, 5, 10, 15, and additional increments of 5 m, up to 75 m.
♣ See On-Machine Connectivity Catalog for complete cable selection information.
13
www.ab.com/catalogs
4-80
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
1585A-DD4JD
Bulletin 280/281, 283, 284
ArmorStart Distributed Motor Controller
®
Accessories
ArmorPoint® Media §
Length [m (ft)]
Cat. No.
ArmorPoint Bus Extension Cable including Terminating Resistor
Description
1 (3.3)
280A-EXT1
Extension Cable to connect two ArmorStart Distributed Motor Controllers to ArmorPoint
communication protocol
1 (3.3)
280A-EXTCABLE
0
§ ArmorPoint media is only available with an IP67/NEMA Type 4 rating.
1
Sensor Media 2
DeviceNet/ArmorPoint Communications
ArmorStart
I/O
Connection
Description
DC Micro
Patchcord
DC Micro VCable
AC Micro
Patchcord
Input
Input
Output
Pin Count
4-pin
4-pin
3-pin
Connector
Cat. No.
Straight Female
Straight Male
889D-F4ACDM-®
Straight Female
Right Angle Male
889D-F4ACDE-®
Straight Female
879D-F4ACDM-®
Right Angle Female
879D-R4ACM-®
Straight Female
Straight Male
889R-F3AERM-®
Straight Female
Right Angle Male
889R-F3AERE-®
3
4
5
6
EtherNet/IP Communications
ArmorStart
I/O
Connection
Description
DC Micro
Patchcord
DC Micro VCable
Input/Output
Input
Pin Count
4-pin
4-pin
Connector
Cat. No.
Straight Female
Straight Male
889D-F4ACDM-®
Straight Female
Right Angle Male
889D-F4ACDE-®
Straight Female
879D-F4ACDM-®
Right Angle Male
879D-R4ACM-®
7
8
9
See On-Machine Connectivity Catalog for complete cable selection information.
® Replace symbol with desired length in meters (Example: 889D-F4ACDM-1 for a 1 m cable). Standard cable lengths: 1, 2, 5, and 10 m.
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-81
Bulletin 280/281, 283, 284
ArmorStart® Distributed Motor Controller
Accessories
Motor and Brake Cables
0
Description
Cable Rating
1
90° M22 Motor Cordset
IP67/NEMA Type 4
2
Motor Cable Cordsets
90° M35 Motor Cordset
IP67/NEMA Type 4
3
90° M22 Motor Cordset
4
5
6
90° M35 Motor Cordset
Motor Cable Cordsets, High
Flex1
90° M22 Motor Cordset
90° M22 Motor Cordset
IP69K/NEMA 4X
IP69K/NEMA 4X
IP67/NEMA Type 4
IP67/NEMA Type 4
Motor Cable Cordsets,
Shielded (VFD)
90° M22 Motor Cordset
7
IP69K/NEMA Type 4X
IP67/NEMA Type 4
Extended Source/Control Brake
Cable Cordsets
90° M25 Source Brake Cable
IP69K
8
Extended Source/Control Brake
Cable Cordsets, High Flex1
9
Dynamic Brake Cables
90° M25 Source Brake Cable
IP67/NEMA Type 4
Length [m (ft)]
Cat. No.
3 (9.8)
280-MTR22-M3
6 (19.6)
280-MTR22-M6
10 (32.8)
280-MTR22-M10
14 (45.9)
280-MTR22-M14
20 (65.6)
280-MTR22-M20
3 (9.8)
280-MTR35-M3
6 (19.6)
280-MTR35-M6
10 (32.8)
280-MTR35-M10
14 (45.9)
280-MTR35-M14
20 (65.6)
280-MTR35-M20
3 (9.8)
280S-MTR22-M3
6 (19.6)
280S-MTR22-M6
14 (45.9)
280S-MTR22-M14
6 (19.6)
280S-MTR35-M6
14 (45.9)
280S-MTR35-M14
3 (9.8)
280-MTRF22-M3
6 (19.6)
280-MTRF22-M6
8 (26.2)
280-MTRF22-M8
10 (32.8)
280-MTRF22-M10
14 (45.9)
280-MTRF22-M14
20 (65.6)
280-MTRF22-M20
3 (9.8)
284-MTRS22-M3
6 (19.6)
284-MTRS22-M6
14 (45.9)
284-MTRS22-M14
3 (9.8)
284S-MTRS22-M3
6 (19.6)
284S-MTRS22-M6
14 (45.9)
284S-MTRS22-M14
6 (19.6)
285-BRC25-M6
14 (45.9)
285-BRC25-M14
6 (19.6)
285S-BRC25-M6
14 (45.9)
285S-BRC25-M14
3 (9.8)
285-BRCF25-M3
6 (19.6)
285-BRCF25-M6
10 (32.8)
285-BRCF25-M10
14 (45.9)
285-BRCF25-M14
20 (65.6)
285-BRCF25-M20
M22 Dynamic Brake Cable (DB
Option)
IP67/NEMA Type 4
3 (9.8)
285-DBK22-M3
IP69K
3 (9.8)
285S-DBK22-M3
Description
Cable Rating
Length [m (ft)]
Cat. No.
1 (3.3)
280-MTR22-M1D
3 (9.8)
280-MTR22-M3D
1 (3.3)
280-MTR35-M1D
10
Description
90° Male/Straight Female M22
11
90° Male/Straight Female M35
IP67/NEMA Type 4
IP67/NEMA Type 4
Motor Cable Patchcords
90° Male/Straight Female M22
12
90° Male/Straight Female M35
90° Male/Straight Female M22
13
IP69K/NEMA Type 4X
IP69K/NEMA Type 4X
IP67/NEMA Type 4
Motor Cable Patchcords,
Shielded (VFD)
90° Male/Straight Female M22
IP69K/NEMA Type 4X
3 (9.8)
280-MTR35-M3D
1 (3.3)
280S-MTR22-M1D
3 (9.8)
280S-MTR22-M3D
1 (3.3)
280S-MTR35-M1D
3 (9.8)
280S-MTR35-M3D
1 (3.3)
284-MTRS22-M1D
3 (9.8)
284-MTRS22-M3D
1 (3.3)
284S-MTRS22-M1D
3 (9.8)
284S-MTRS22-M3D
1 14 million flex cycles, bend radius is maximum 8X the cable diameter (0.362 in. OD).
www.ab.com/catalogs
4-82
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281, 283, 284
ArmorStart Distributed Motor Controller
®
Accessories
Sealing Caps
0
1
ArmorPoint
DeviceNet
EtherNet/IP
Input
Output
Input
Output
Input
Output
Cat. No.
Cat. No.
Cat. No.
Cat. No.
Cat. No.
Cat. No.
1485A-M12
1485A-M12
1485A-M12
Plastic Sealing Cap (M12)1
⎯
AC Micro Aluminum Sealing Cap1
⎯
Stainless Steel Sealing Cap‡
⎯
Motor Connector Aluminum Sealing Cap (M22) for 10 A protection1
⎯
Motor Connector Aluminum Sealing Cap (M35) for 25 A protection1
Dynamic Brake Connector (M22)
Source/Control Brake Cap (M25)
1485A-M12
1485A-M12
889A-RMCAP
⎯
889AS-RMCAP 1485AS-C3 889AS-RMCAP
⎯
⎯
⎯
⎯
1485A-C1
⎯
1485A-C1
⎯
1485A-C1
⎯
889A-QMCAP
⎯
889A-QMCAP
⎯
889A-QMCAP
⎯
1485A-C1
⎯
1485A-C1
⎯
1485A-C1
⎯
♣
⎯
♣
⎯
♣
889A-RMCAP
2
3
1 To achieve IP67 rating, sealing caps must be installed on all unused I/O connections.
‡ To achieve IP69K/NEMA 4X rating, sealing caps must be installed on all unused I/O connections.
♣ Contact your local Rockwell Automation sales office or Allen-Bradley distributor.
4
5
Handle and Cord Accessories
Description
Cat. No.
Locking Tag
Padlock attachment to the lockable handles
Up to three padlocks 4…8 mm (5/16 in.) Ø shackle
140M-C-M3
Replacement At-Motor Disconnect Handle Kit
includes: (1) handle, (1) guard, and (3) screws
280-DISHDL
6
7
8
Cord grips for ArmorStart devices with 10 A short circuit protection rating
3/4 in. Strain relief cord connector and 3/4 in. lock nut
Cable range: 0.31…0.56 in.
Used with control power media cordset Example cat. no.: 889N-M65GF-M2
Thomas & Betts Cord Grip Cat.
No. 2931NM
1 in. Strain relief cord connector and 1 in. lock nut
Cable range: 0.31…0.56 in.
Used with control power media cordset Example cat. no.: 280-PWR22G-M
Thomas & Betts Cord Grip Cat.
No. 2940NM
9
Cord grips for ArmorStart devices with 25 A short circuit protection rating
3/4 in. Strain relief cord connector and 3/4 in. lock nut
Cable range: 0.31…0.56 in.
Used with control power media cordset Example cat. no.: 889N-M65GF-M2
Thomas & Betts Cord Grip Cat.
No. 2931NM
1 in. Strain relief cord connector and 1 in. lock nut
Cable range: 0.70…0.95 in.
Used with three-phase power media cordset Example cat. no.: 280-PWR35G-M1
Thomas & Betts Cord Grip Cat.
No. 2942NM
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-83
Bulletin 284
ArmorStart® Distributed Motor Controller
Accessories
Dynamic Brake Selection for DB Option
0
Application Type 1
Drive and
Motor Size
[kW (Hp)]
Resistance
[Ω]
Continuous
Power [kW]
Max. Energy
[kJ]
Max. Braking
Torque
[% of motor]
Braking
Torque
[% of motor]
Application Type 2
Duty Cycle‡
Braking
Torque
[% of motor]
Duty Cycle‡
Cat. No.1
200…240V AC Input Drives
1
0.37 (0.5)
293%
91
0.75 (1)
0.086
17
218%
1.5 (2)
100%
109%
48%
150%
31%
AK-R2-091P500
23%
150%
15%
AK-R2-091P500
11%
109%
11%
AK-R2-091P500
400…480V AC Input Drives
2
3
0.37 (0.5)
360
0.086
17
305%
47%
150%
31%
AK-R2-360P500
0.75 (1)
360
0.086
17
220%
23%
150%
15%
AK-R2-360P500
1.5 (2)
360
0.086
17
110%
12%
110%
11%
AK-R2-360P500
2.2 (4)
120
0.26
52
197%
24%
150%
16%
AK-R2-120P1K2
4 (5)
120
0.26
52
124%
13%
124%
10%
AK-R2-120P1K2
100%
600V AC Input Drives
0.37 (0.5)
360
0.086
17
274%
46%
150%
31%
AK-R2-360P500
0.75 (1)
360
0.086
17
251%
23%
150%
15%
AK-R2-360P500
1.5 (2)
360
0.086
17
172%
11%
150%
8%
AK-R2-360P500
2.2 (4)
120
0.26
52
193%
24%
150%
16%
AK-R2-120P1K2
4 (5)
120
0.26
52
186%
13%
150%
9%
AK-R2-120P1K2
4
100%
1 Check resistor ohms against the minimum resistance for the drive that is being used.
5
‡ The duty cycle listed is based on the full speed to zero deceleration. For constant regen at full speed, the duty cycle capability is half the values listed.
Application Type 1 represents maximum capability up to 100% of braking torque, where possible. Application Type 2 represents greater than 100% of braking
torque up to a maximum of 150%, where possible.
ArmorStart Bulletin 284 Option DB (IP20) Resistor Installation Dimensions
6
Dimensions are in millimeters (inches) and weights are in kilograms (pounds). Dimensions are not intended to be used for manufacturing
purposes.
Frame A
17.0
(0.67)
31.0
(1.22)
61.0
(2.40)
59.0
(2.32)
Cat. No.
A
AK-R2-091P500, AK-R2047P500, AK-R2360P500
1.1 (2.5)
B
AK-R2-030P1K2, AK-R2120P1K2
2.7 (6)
US
C
C
8
9
335.0
(13.19)
386.0
(15.20)
405.0
(15.94)
AUTOMATION
ROCKWELL
316.0
(12.44)
Weight
[kg (lb)]
Frame
US
7
Frame B
30.0
(1.18) 60.0
(2.36)
ROCKWELL
AUTOMATION
SURFACES MAY BE
Thermostat
10
13.0
(0.51)
Recommended thermostat control wiring to
prevent dynamic brake overheating
11
Power Off
Power On
R (L1)
12
3-Phase
Power
S (L2)
M
T (L3)
M
(M)
Contactor
13
Power Source
www.ab.com/catalogs
4-84
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
DB Resistor Thermostat
Bulletin 284
ArmorStart Distributed Motor Controller
®
Accessories
Dynamic Brake Selection for DB1 (IP67) Option
Application Type 1
Drive and
Motor Size
[kW (Hp)]
Resistance
[Ω]
Continuous
Power [kW]
Max. Braking
Torque
[% of motor]
Max. Energy
[kJ]
Braking
Torque
[% of motor]
Application Type 2
Duty Cycle‡
Braking
Torque
[% of motor]
0
Duty Cycle‡
Cat. No.§
200…240V AC Input Drives
0.37 (0.5)
293%
0.75 (1)
91
0.086
218%
17
1.5 (2)
100%
109%
46%
150%
31%
284R-091P500-M1
23%
150%
15%
284R-091P500-M1
11%
109%
11%
284R-091P500-M1
1
400…480V AC Input Drives
0.37 (0.5)
360
0.086
17
305%
47%
150%
31%
284R-360P500-M1
0.75 (1)
360
0.086
17
220%
23%
150%
15%
284R-360P500-M1
1.5 (2)
360
0.086
17
110%
12%
110%
11%
284R-360P500-M1
2.2 (4)
120
0.26
52
197%
24%
150%
16%
284R-120P1K2-M1
4 (5)
120
0.26
52
124%
13%
124%
10%
284R-120P1K2-M1
46%
150%
31%
284R-360P500-M1
284R-360P500-M1
100%
600V AC Input Drives
0.37 (0.5)
360
0.086
17
274%
0.75 (1)
360
0.086
17
251%
1.5 (2)
360
0.086
17
172%
23%
150%
15%
11%
150%
8%
2.2 (4)
120
0.26
52
284R-360P500-M1
193%
24%
150%
16%
284R-120P1K2-M1
4 (5)
120
0.26
52
185%
13%
150%
9%
284R-120P1K2-M1
100%
2
3
4
1 Length is user-selectable based on a suffix added to the catalog number. For a length of 500±10 mm, add -M05 to the end of the catalog number. For a length
of 1000±10 mm, add -M1 to the end of the catalog number.
‡ The duty cycle listed is based on the full speed to zero deceleration. For constant regen at full speed, the duty cycle capability is half the values listed.
Application Type 1 represents maximum capability up to 100% of braking torque, where possible. Application Type 2 represents greater than 100% of braking
torque up to a maximum of 150%, where possible.
§ Drive rating and DB part numbers are not interchangeable. Only use specified resistor. Customer is responsible to evaluate if performance meets application
requirement
5
6
ArmorStart Bulletin 284 Option DB1 (IP67) Resistor Installation Dimensions
Dimensions are in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
7
8
A
H
9
B
C
D
10
J
E
11
F
G
Cat. No.
A
284R-091P500
284R-360P500
284R-120P1K2
B
C
D
215 ±5 (8.46
±0.2)
89 ±3 (3.5
±0.12)
215 ±5 (8.46
±0.2)
420 ±5 (16.54
±0.2)
E
F
G
H
J
60 ±2 (2.36
±0.08)
127 (5)
12.54 (0.49)
60 ±2 (2.36
±0.08)
50 ±1.5 (1.97
±0.06)
235 ±5 (9.25
±0.2)
M05 = 0.5
meter
M1 = 1 meter
235 ±5 (9.25
±0.2)
12
440 ±5 (17.32
±0.2)
www.ab.com/catalogs
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-85
Bulletin 280D/281D, 284D
ArmorStart® Distributed Motor Controller — Safety Version
Accessories
0
1
Safety I/O Module and TÜV Requirements
ArmorStart Safety-Related Parts
Each ArmorStart Safety Distributed motor controller is intended to be combined with the Cat. No. 1732DS-IB8XOBV4 safety I/O module to
form a subsystem that is part of the overall machine stop function. The motor controllers are connected to the safety I/O module through
specified cable assemblies. The combination of one of these controllers, the safety module, and the specified interconnecting cables are
referred to as the ArmorStart Safety-Related Parts. The catalog numbers for each of these components is specified below. The combination
of these components is shown below. The safety I/O module and PLC program must be configured appropriately to meet TÜV CAT4 PLe
certification. Refer to the user manual for details.
Catalog Number
2
3
Description
280…S*
* - denotes safety version of Bulletin 280
Bulletin 280 Distributed Motor Controller – controller is full-voltage, non-reversing
281…S*
* - denotes safety version of Bulletin 281
Bulletin 281 Distributed Motor Controller – controller is full-voltage, reversing
284…S*
* - denotes safety version of Bulletin 284
Bulletin 284 Distributed Motor Controller – controller is variable-frequency AC drive
1732DS-IB8XOBV4
Guard I/O DeviceNet Safety Module
For use with:
SM Connector - Patch cable between Safety I/O module input and ArmorStart connector labeled “SM”. This
889D-F4AEDM-1* or equivalent
provides status feedback to the safety system.
For standard lengths, replace * symbol with
A1/A2 connector - Patch cable assembly between Safety I/O module output and ArmorStart connector labeled
0M3 (1 ft), 1 (1 m), 2 (2 m), 5 (5 m) or
“A1/A2”. This provides coil power to contactors and and ArmorStart power supply.
10 (10m).
See On-Machine Connectivity Catalog for complete cable selection information.
4
RESET
5
OFF
6
Three-Phase Power Media
7
DeviceNet Media
8
I/O Output
9
10
The Bulletin 1732DS Safety I/O module outputs
to provided 24V DC power for control power to
the ArmorStar6t - A1/A2 control input
I/O Input
11
Aux. Power
12
The Bulletin 1732DS Safety I/O module inputs will monitor the status of the safety-related contactors inside the ArmorStart - SM safety monitor input
13
www.ab.com/catalogs
4-86
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280D/281D, 284D
ArmorStart Distributed Motor Controller — Safety Version
®
Accessories
ArmorBlock® Guard I/O™ Modules
Description
Cat. No. Modification
ArmorBlock® Guard I/O™ provides all the advantages of traditional distributed I/O for safety
systems, but has an IP67 package that can be mounted directly on your machine.
You can use Guard Safety I/O with any safety controller that communicates on DeviceNet using
CIP Safety for the control and monitoring of safety circuits. Guard I/O detects circuit failures at
each I/O point while providing detailed diagnostics directly to the controller.
0
1
1732DS-IB8XOBV4
For assistance and example configuration, see the Safety Accelerator for GuardLogix Systems at
www.ab.com
2
3
1732DS ArmorBlock Guard I/O Micro Connector Pin Assignments♣
Input Configuration
Output Configuration
Pin
Signal
Female
1
Test Output n+1
2
Safe Input n+1
3
Input Common
4
Safe Input n
5
Test Output n
2
5
1
3
4
Pin
Signal
1
Output +24V DC Power
2
Output n+1 (Sinking)
3
Output Power Common
4
Output n (Sourcing)
5
Output Power Common
4
5
♣ ArmorStart Safety version uses a 4-pin male connector, pin 5 is not used. Either a 4- or 5-pin patch cord can be used.
6
1732DS ArmorBlock Guard I/O Mini Connector Pin Assignments
ArmorBlock Guard I/O DeviceNet Configuration
Pin
Signal
1
Drain
Male
2
V+ (Red)
3
V- (Black)
4
CAN_H (White)
5
CAN_L (Blue)
7
Female
8
9
ArmorBlock Guard I/O Power Configuration
Pin
Signal
1
Output +24V dc Power (Red)
2
Input +24V dc Power (Green)
3
Input Power Common (White)
4
Output Power Common (Black)
Male
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-87
Bulletin 280D/281D, 284D
ArmorStart® Distributed Motor Controller — Safety Version
Accessories
ArmorBlock Guard I/O Recommended Compatible Cables and Connectors1
Description
0
Cat. No.
DC Micro (M12) Male Cordset
1
Five-pin M12 patchcord, 1 m (39.37 in.)
2
3
889D-F4HJ-
PVC jacket offers good oil and chemical resistance
889D-F4AEDM-*
TPE jacket material for good oil, chemical, and weld slag resistance
889D-F4HJDM-‡
M12 Terminal Chamber—Straight Male
871A-TS4-DM
M12 Terminal Chamber—Right Angle Male
871A-TR4-DM
1 All cables must use 5-pin connections for ArmorBlock Guard I/O M12 input compatibility.
Replace symbol with 0M3 (0.3 m), 2 (2 m), or 5 (5 m) for standard cable length.
‡ Replace symbol with 1 (1 m), 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable length.
4
ArmorStart Safety Version and Guard I/O Module Connection Diagram
ArmorStart Control Voltage
5
Output Power
6
Network
Control
Safe Outputs
Safe Output
Sinking
7
Output Com.
Safe Output
Sourcing
8
9
10
Safe Inputs
11
12
13
www.ab.com/catalogs
4-88
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280/281, 283, 284
ArmorStart Distributed Motor Controller
®
Accessories
Peer-to-Peer Communications
Zone 4
Zone 3
Zone 2
Zone 1
DeviceNet
Sensor
(ZIP) Zone interlocking Parameters
The Zone Control capabilities of ArmorStart
Distributed Motor Controller is ideal for large
horsepower (0.5…10 Hp) motored
conveyors. The ArmorStart Distributed
Motor Controllers have built-in DeviceNet
Communications, DeviceLogix technology,
and the added Zone Interlocking Parameters
(ZIP), which allow one ArmorStart to
consume data directly from up to four other
DeviceNet nodes without going through the
network scanner. These direct
communications between conveyor zones
are beneficial in a merge, diverter, and
accumulation conveyor applications.
Standard
Photoelectric
0
1
2
3
ArmorStart to ArmorPoint Connectivity - (Networks other than DeviceNet)
4
When connecting to the Bulletin 1738 ArmorPoint Distributed I/O product, a network
adapter and at least one ArmorPoint Digital Output, Digital Input, Analog, AC and
Relay product, or Specialty product must be selected. The ArmorPoint Distributed I/O
can accomodate up to 63 modules per network node. The cable that connects the
ArmorPoint Distributed I/O product to the ArmorStart Distributed Motor Controller is
the Cat. No. 280A-EXT1. The Cat. No. 280A-EXT1 includes an ArmorPoint bus
extension cable and a network terminating resistor.
5
Note: Access to DeviceLogix programming is available with RSNetworx for DeviceNet.
6
If an additional ArmorStart Distributed Motor
Controller is to be connected, the Cat. No. 280AEXTCABLE will be required. A maximum of two
ArmorStart Distributed Motor Controllers can be
connected to the Bulletin 1738 Distributed I/O.
Bus Extender
ArmorStart Extension
8
I/O Expansion with DeviceNet
9
DeviceNet Trunk
If the I/O capability of the Bulletin 280/281D ArmorStart Distributed Motor
Controller needs to be expanded beyond the standard four inputs and two
outputs, the ArmorStart Distributed Motor Controller with the DeviceNet
communication protocol can be configured to the ADNX Architecture, in which
the ArmorStart is part of the DeviceNet subnet, using the Cat. No. 1738-ADNX
ArmorPoint Distributed I/O product.
ADNX
Architecture
Sub-net
Node 1
7
10
11
Sub-net
Node 2
DeviceNet Subnet
12
Sub-net Node 3
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-89
Bulletin 280/281, 283, 284
ArmorStart® Distributed Motor Controller
Accessories
0
Bulletin 1738 ArmorPoint Distributed I/O Products
Digital Output Products
Description
1
2
AC and Relay Products
Cat. No.
Description
24V DC, eight source output
with eight M12 connectors
1738-OB8EM12
24V DC, eight source output
with eight M8 connectors
1738-OB8EM8
24V DC, four source output
with four M12 connectors
1738-OB4EM12
24V DC, four source output
with four M8 connectors
1738-OB4EM8
24V DC, two source output
with two M12 connectors
1738-OB2EM12
24V DC, two source output,
1738-OB2EPM12
2 A prot. with two M12
connectors
24V DC, four sink output
with four M12 connectors
3
1738-OV4EM12
Description
4
5
6
10
120V AC, two input with
two AC 4-pin M12
connectors
1738-IA2M12AC4
120V AC, two input with
two AC 3-pin M12
connectors
1738-IA2M12AC3
120/230V AC, two output
with two AC 3-pin M12
connectors
1738-OA2M12AC3
ArmorPoint I/O RS-485
ASCII Serial Interface
Module
1738-485ASCM12
1738-IB8M23
24V DC Very High Speed
Counter Module
1738-VHSC24M23
24V DC, four sink input with
four M12 connectors
1738-IB4M12
ArmorPoint 5V
Encoder/Counter Module
1738-IJM23
24V DC, four sink input with
four M8 connectors
1738-IB4M8
24V DC, two sink input with
two M12 connectors
1738-IB2M12
ArmorPoint Synchronous
Serial Interface Module with
Absolute Encoder
24V DC, four source input
with four M12 connectors
1738-IV4M12
24V DC, eight sink input with
eight M8 connectors
1738-IB8M8
24V DC, eight sink input with
one M23 connector
Adapter Products
Cat. No.
24V DC analog current input
with two M12 connectors
1738-IE2CM12
24V DC analog voltage input
with two M12 connectors
1738-IE2VM12
24V DC analog current
output with two M12
connectors
1738-OE2CM12
24V DC analog voltage
output with two M12
connectors
1738-OE2VM12
24V DC, two thermocouple
input
1738-IT2IM12
24V DC, two RTD input
1738-IR2M12
Cat. No.
ArmorPoint I/O Field Potential
Distributor Module
24V DC Expansion Power
Supply
1738-SSIM23
Description
Description
1738-FPD
Cat. No.
ArmorPoint DeviceNet
Adapter Module, Drop or
Pass-through, with male and
female M12 connectors
1738-ADN12
ArmorPoint DeviceNet
Adapter Module, Drop only,
with male M18 connector
1738-ADN18
ArmorPoint DeviceNet
Adapter Module, Drop or
Pass-through, with male and
female M18 connectors
1738-ADN18P
ArmorPoint DeviceNet 24V
DC Adapter Module with
subnet expansion
1738-ADNX
ArmorPoint Redundant
ControlNet Adapter Module
1738-ACNR
ArmorPoint Ethernet/IP
10/100 Mbps Adapter Module
1738-AENT
ArmorPoint I/O 2-Port
EtherNet/IP Adapter (star,
tree, linear, or ring topology)1
1738-AENTR
1 Requires a 24V DC expansion power unit (cat. no. 1738-EP24DC) when two
1738-EP24DC
ArmorStarts are connected to point bus.
12
13
www.ab.com/catalogs
4-90
Cat. No.
1738-232ASCM12
1738-IB8M12
Power Supply Products
11
1738-OW4M12AC
ArmorPoint I/O RS-232
ASCII Serial Interface
Module
Description
9
24V DC Coil, N.O. DPST
relay with two AC M12
connectors
Description
Cat. No.
24V DC, eight sink input with
four M12 connectors, two
points per connector
Analog Products
8
1738-OW4M12
Specialty Products
Digital Input Products
7
Cat. No.
24V DC Coil, N.O. DPST
relay with two M12
connectors
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280, 888, 889, 898
Power Media
Product Overview
Three-Phase Power Media
0
Three-Phase Power
Trunk Cable
Description
Features
Cordset - Cable with
Integral Female or Male
connector on one end
PatchCord - Cable with
integral female or male
connector on each end
Rated for Motor Branch
Circuits
- Meets UL 2237 for
Industrial Machinery
- 65ka High fault
rating (SCCR)
- Rated for wash
down environments
Straight or Right Angle
Connectors
4-pin connector type
Cable Rating: TC-ER/
STOOW
Multiple Standard
lengths
Rated Voltage
Connector Body
Dimensions
600V
Cordset - Cable with
Integral Female or Male
connector on one end
PatchCord - Cable with
integral female or male
connector on each end
Three-Phase Power
Tees and Reducers
Rated for Motor Branch
Circuits
- Meets UL 2237 for Rated for Motor Branch
Circuits
Industrial Machinery
- Meets UL 2237 for
- 65ka High fault
Industrial Machinery
rating (SCCR)
- 65ka High fault
- Rated for wash
rating (SCCR)
down environments
- Rated for wash
Straight or Right Angle
down environments
Connectors
Trunk Tee, Reducing Tee
4-pin connector type
and Reducer
Cable Rating: TC 4-pin connector type
ER/STOOW
Multiple Standard
lengths
Three-Phase Power
Accessories
Rated for Motor Branch
Circuits
- Meets UL 2237 for
Industrial Machinery
- 65ka High fault
Sealing Caps - Available
rating (SCCR)
in M35 and M22 styles
- Rated for wash
Locking Clips down environments
Designed for M35 and
Male and female
M22 connectors
configurations
4-pin connector type
1/2 in. NPT
Available in 1 meter
length
600V
Trunk Tee:
108 mm x 73.6 mm
Reducing Tee:
108 mm x 65.5 mm
Reducer:
112.5 mm x 38.1 mm
Straight:
56. mm x 25.4 mm
Right Angle:
44.9 mm x 40.4 mm
Page 4-97
Three-Phase Power
Receptacles
Tee - Connects to a
single drop line to trunk
Female receptacles are Sealing Caps offered in
with M35 connectors
a panel mount
versions to interface
Reducing Tee connector with flying
with female or male
Connects to a single
leads
connectors
M22 drop line to trunk
Male receptacles are a Locking Clips clamshell
M35 connector
motor juction box
design clips over three
Reducer - Connects
mounted connector with
power phase connector
from M35 male
flying leads
to limit customer access
connector to M22
female connector
600V
Straight:
88.9 mm x 38.6 mm
Right Angle:
75.5 mm x 74 mm
Product Selection
Three-Phase Power
Drop Cable
Page 4-98
Page 4-99
⎯
600V
M22 Female:
33.45 mm x 25.45
M22 Male:
28.04 mm x 25.45
M35 Female:
71.12 mm x 38.10
M35 Male:
63.50 mm x 38.10
1
2
3
4
5
6
mm
mm
⎯
7
mm
mm
Page 4-101
Page 4-107
8
Control Power Media
9
Control Power
Cordsets & Patchcords
Control Power
T-ports
Control Power
Receptacles
Control Power
Shorting Plugs
Control Power
Accessories
Description
Cable with integral
Cable with single male
connector on either one or
connector attached to
both ends
two female connectors
Panel mount connector
with flying leads
Integral connector with
leads shorted for
specific application
requirements
Sealing caps, mounting
nuts, and sealing
washers
Features
6-pin/5-used configuration
6-pin/5-used
Male and female
configuration
Straight or right angle
Compact design
versions
Color-coded E-stop in
16 AWG conductors, cable
and E-stop out
dual rated UL TC/Open
configurations
Wiring and STOOW
Multiple Standard lengths
6-pin/5-used
configuration
Male and female
16 AWG conductors
1/2 NPT mounting
threads
Multiple standard
lengths
6-pin/5-used
configuration
Male
Multiple versions color
coded for simple
identification
Rugged durable
construction
Designed to mate with
Control Power media
Rated Voltage
Connector Body
Dimensions
Product Selection
600V
Straight:
56 x 25 mm (2.2 x 1 in.)
Right Angle:
40 x 45 mm (1.6 x 1.8 in.)
Page 4-103
600V
600V
⎯
72 x 64 mm (2.8 x 2.5 in.)
30 x 25 mm (1.2 x 1 in.)
56 x 25 mm (2.2 x 1 in.)
⎯
Page 4-104
Page 4-105
Page 4-106
Page 4-107
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
11
12
600V
www.ab.com/catalogs
10
4-91
13
Bulletin 280, 888, 889, 898
Power Media
Product Overview
0
1
2
3
4
Description
Three-Phase Power Media
Control Power Media
The power media offers both three-phase
and control power cable systems of
cordsets, patchcords, receptacles, tees,
reducers and accessories, to be used with
the ArmorStart Distributed Motor Controller.
These cable system components allow
quick connection of ArmorStart Distributed
Motor Controllers, thereby reducing
installation time. They provide for
repeatable, reliable connection of the threephase and control power to the ArmorStart
Distributed Motor Controller and motor, by
providing a plug and play environment that
also avoids system mis-wiring.
The three-phase power media offers quick
disconnect cables that provide a secure
connection to the ArmorStart Distributed
Motor Controller. The connectors can be
straight or right angled and are physically
keyed to prevent wiring mishaps. The
cabling options include:
Cordsets: Cable with integral male or
female connector at one end and flying
leads at the other
Patchcords: Cable with integral
connector at each end (one male, one
female)
The control power media offers a mini
disconnect cables that provides a secure
connection to the ArmorStart Distributed
Motor Controller. The control power media
components are a 6-pin/5-used
configuration to prevent mis-wiring with
network connectors. The connectors can
be straight or right angled and are
physically keyed to prevent wiring mishaps.
The cabling options include:
Cordsets: Cable with integral male or
female connector at one end and flying
leads at the other
Available in 2, 5, or 10 m lengths.
Patchcords: Cable with integral
connector at each end (one male, one
female)
Available in 1, 2, 3, 5, or 10 m lengths.
Compared to the traditional conduit
installations, with power media you profit
and benefit from:
Reduce commissioning time
Plug and play design eliminates wiring
errors
Increased system design flexibility
No special tools required
Reduced labor costs
Available in 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10,
12, or 14 m lengths.
The three-phase power tee, reducing tee,
and reducer offers flexibility in system
design.
The receptacles provide a termination point
at the panel and motor junction box. The
female receptacles can be used for a panel
mount connection. The male receptacles
can be used for a quick disconnect at the
motor junction box.
Three-phase power media components are
rated for motor branch circuits per
UL 2237.
5
The control power tees offers flexibility in
system design. The 6-pin/5-used T-port
connects a single drop line to the trunk.
Two types of tees are offered. The E-stop In
tee is used to connect to the Bulletin 800F
On-Machine E-Stop station using a control
power media patchcord. The E-stop Out
tee is used with cordset or patchcord to
connect to the ArmorStart Distributed
Motor Controller.
The receptacles provide a termination point
at the panel and ArmorStart Distributed
Motor Controller. The female receptacles
can be used for a panel mount connection.
The male receptacles can be used for a
quick disconnect at the ArmorStart
Distributed Motor Controller with gland
plate design.
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-92
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280, 888, 889, 898
Power Media
Three-Phase Power Media Diagram
Three-Phase Power Media System Overview
Enclosure
0
PLC
Bulletin 1492FB
Branch Circuit
Protective Device
Bulletin 1606
Power Supply
1606-XLSDNET4
DeviceNet
Power Supply
1
2
3
Bulletin 283
ArmorStart
Bulletin 280/281
ArmorStart
Bulletin 284
ArmorStart
4
RESET
OFF
5
6
Bulletin 800F
Emergency Stop
Pushbutton
7
8
9
10
1.
2.
3.
4.
Three-Phase Power Trunk - Patchcord cable with integral female or male connector on each end (Example Cat. No.:
280-PWR35A-M*)
Three-Phase Drop Cable - PatchCord cable with integral female or male connector on each end (Example Cat. No.:
280-PWR22A-M*)
Three-Phase Power Tees and Reducer - Tee connects to a single drop line to trunk with quick change connectors
(Cat. No.: 280-T35)
Reducing Tee connects to a single drop line (Mini) to trunk (Quick change) connector (Cat. No.: 280-RT35)
Reducer connects from quick change male connector to mini female connector(Cat. No.: 280-RA35)
Three-Phase Power Receptacles - Female receptacles are a panel mount connector with flying leads (Cat. No.: 280M35F-M1)
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-93
Bulletin 280, 888, 889, 898
Power Media
Control Power Media Diagram
Control Power Media System Overview
Enclosure
0
PLC
Bulletin 1492FB
Branch Circuit
Protective Device
1
Bulletin 1606
Power Supply
1606-XLSDNET4
DeviceNet
Power Supply
2
3
Bulletin 283
ArmorStart
Bulletin 280/281
ArmorStart
4
Bulletin 284
ArmorStart
RESET
OFF
5
6
Bulletin 800F
Emergency Stop
Pushbutton
7
8
9
10
6.
7.
11
8.
Control Power Media Patchcords - PatchCord cable with integral female or male connector on each end (Example
Cat. No.: 889N-F65GFNM-*)
Control Power Tees - The E-stop In Tee (Cat. No.: 898N-653ST-NKF) is used to connect to the Bulletin 800F OnMachine E-Stop station using a control power media patchcord. The E-stop Out tee (Cat. No.: 898N-653ES-NKF) is
used with cordset or patchcord to connect to the ArmorStart Distributed Motor Controller.
Control Power Receptacles - Female receptacles are a panel mount connector with flying leads (Cat. No.: 888ND65AF1-*)
12
13
www.ab.com/catalogs
4-94
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280, 888, 889, 898
Power Media
Three-Phase Power Media Diagram
DeviceNet Media System Overview
0
Enclosure
PLC
Bulletin 1492FB
Branch Circuit
Protective Device
Bulletin 1606
Power Supply
1606-XLSDNET4
DeviceNet
Power Supply
1
2
3
Bulletin 283
ArmorStart
Bulletin 280/281
ArmorStart
Bulletin 284
ArmorStart
4
RESET
OFF
5
6
Bulletin 800F
Emergency Stop
Pushbutton
5
7
8
9
10
1.
2.
3.
4.
5.
DeviceNet Trunk Cable - Patchcord trunk cable with integral female or male connector on each end
(example 1485C-P*N5-M5)
DeviceNet Mini- T-Port Tap - T-ports are used for connecting drops to the trunk line (example 1485P-P1N5-MN5KM)
DeviceNet Drop Cable - Drop cables and patch cords are used to connect devices to the network
(example 1485G-P*M5-Z5)
DeviceNet Receptacle - Recepatcles are used when connections present but required (example 1485A–CXN5–M5)
DeviceNet Terminator - Properly designed DeviceNet networks require terminating resistors (example 1485A–T1N5)
11
12
Note: See the On-Machine Connectivity catalog for specific DeviceNet media components.
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-95
Bulletin 280, 888, 889, 898
Power Media
EtherNet and Control Power Media Diagram
EtherNet Power Media System Overview
0
1
2
3
4
5
6
7
EtherNet Cat5e Connections:
1. CAT5e Bulkhead Connector and Receptacle (Example Cat. No.:1585A-DD4JD)
2. CAT5e Patch Cord, IP67, M12 D-Code, Male Straight, Male Right Angle (Example Cat. No.: 1585D-M4TBDE-*)
3. CAT5e, Patch Cable, IP20, RJ45 Male to RJ45 Male (Example Cat. No. 1585J-M4TB-*)
Note: See the On-Machine Connectivity catalog for specific EtherNet media components.
8
9
10
11
12
13
www.ab.com/catalogs
4-96
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280
Three-Phase Power Media
Product Selection/Specifications/Approximate Dimensions
Bulletin 280 ⎯ Three-Phase Power Trunk Cables (Cordsets
and Patchcords)
Table of Contents
Accessories.................. 4-107
Listed per UL 2237 for use in motor branch circuits per NFPA 79
One piece molded design, M35 connection
Can be used as a drop cable for 25 A rated ArmorStart Distributed
Motor Controller or when desired to minimize voltage drops on
extended cable runs
0
Standards Compliance
UL 2237
Certifications
UL Listed (File No. E318496,
Guide PVVA)
Product Selection
Cordsets 1
2
Cat. No.
Pin Count
4-pin
Assembly Rating
600V, 25 A
Straight Female
280-PWRM35E-M1
Right-Angle Female
280-PWRM35F-M1
Straight Male
280-PWRM35G-M1
Right-Angle Male
280-PWRM35H-M1
3
Patchcords Cat. No.
Pin Count
4-pin
Straight Female
Straight Male
280-PWRM35A-M1
Assembly Rating
600V, 25 A
Right-Angle Female
Straight Male
280-PWRM35B-M1
Straight Female
Right-Angle Male
280-PWRM35C-M1
Right-Angle Female
Right-Angle Male
280-PWRM35D-M1
4
Stainless steel version may be ordered by adding S to the cat. no. (Example: Cat. No. 280S-PWRM35A-M*)
1 Replace symbol with code from table below that represents length desired.
Feet
1.62
3.3
4.9
6.5
8.1
9.8
13.1
19.7
26.2
32.8
39.4
45.9
Meters
0.5
1
1.5
2
2.5
3
4
6
8
10
12
14
Code
05
1
015
2
025
3
4
6
8
10
12
14
Specifications
Pinout and Color Code
Mechanical
Face View Pinout
Coupling Nut
4-Pin
Black PVC
Insert
Cable Diameter
6
Black anodized aluminum
Housing
Black PVC
0.775 in. +/- 0.12 in. (19.68 mm +/- 0.5 mm) with
four 10 AWG conductors
Electrical
Contacts
Female
Color Code
Male
1 Black
2 Green/Yellow
Extended PIN
Cable Rating
88.9 (3.50)
38.6
(1.52)
600V AC/DC
Assembly Rating
Dimensions in millimeters (inches). Dimensions are not intended to
be used for manufacturing purposes and are subject to change.
Male 90 deg.
Short Circuit Current
Rating (SCCR)
49.5 - 57.1
(1.95 - 2.25)
7
Copper alloy with gold over nickel plating
Black PVC, dual rated UL TC/Open Wiring and
STOOW
Cable
3 Red
4 White
Approximate Dimensions
Male straight
5
8
4-pin — 10 AWG, 600V @ 25 A
Circuit Breaker: Suitable for use on a circuit
capable of delivering not more than 65000 RMS
symmetrical amperes at 480V AC maximum when
protected by Bul. 140U-H frame circuit breaker, not
rated more than 480V, 100 A and a maximum
interrupting of 65000 RMS symmetrical amperes.
Fusing: Suitable for use on a circuit capable of
delivering not more than 65000 RMS symmetrical
amperes at 600V AC maximum when protected by
CC, J, and T class fuses.
9
10
Environmental
74.7
(2.94)
Enclosure Type Rating
IP67, NEMA 4 & 6P; 1200 psi washdown
Operating Temperature
UL Type TC 600V 90 °C Dry 75 °C Wet, Exposed
Run (ER) or MTW 600V 90 °C or STOOW 105 °C
600V - CSA STOOW 600V FT2
38.6
11
(1.52)
Female straight
Female 90 deg.
49.5 - 57.1
(1.95 - 2.25)
12
88.9 (3.50)
38.6
(1.52)
74.7
(2.94)
38.6
(1.52)
www.ab.com/catalogs
Example of Patchcord
13
Example of Cordset
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-97
Bulletin 280
Three-Phase Power Media
Product Selection/Specifications/Approximate Dimensions
Bulletin 280 ⎯ Three-Phase Power Drop Cables (Cordsets
and Patchcords)
0
3
Accessories.................. 4-107
Listed per UL 2237 for use in motor branch circuits per NFPA 79
One-piece molded design, M22 connection
Can be used as a trunk cable for 10 A rated ArmorStart Distributed
Motor Controller
Can be used as a 10 or 15 A non-shielded motor cable
1
2
Table of Contents
Standards Compliance
UL 2237
Certifications
UL Listed (File No. E318496,
Guide PVVA)
Product Selection
Cordsets Cat. No.
Pin Count
Assembly Rating
Straight Female
Right-Angle Female
Straight Male
Right-Angle Male
4-pin
16 AWG, 600V, 10 A
280-PWRM22E-M1
280-PWRM22F-M1
280-PWRM22G-M1
280-PWRM22H-M1
4-pin
14 AWG, 600V, 15 A
280-PWRM24E-M1
280-PWRM24F-M1
280-PWRM24G-M1
280-PWRM24H-M1
Assembly Rating
Straight Female
Straight Male
Right-Angle Female
Straight Male
Straight Female
Right-Angle Male
Right-Angle Female
Right-Angle Male
4-pin
16 AWG, 600V, 10 A
280-PWRM22A-M1
280-PWRM22B-M1
280-PWRM22C-M1
280-PWRM22D-M1
4-pin
14 AWG, 600V, 15 A
280-PWRM24A-M1
280-PWRM24B-M1
280-PWRM24C-M1
280-PWRM24D-M1
Patchcords Cat. No.
4
5
6
Pin Count
Stainless steel version may be ordered by adding S to the cat. no. (Example: Cat. No. 280S-PWRM22A-M*)
1 Replace symbol with code from table below that represents length desired.
Feet
1.62
3.3
4.9
6.5
8.1
9.8
13.1
19.7
26.2
32.8
39.4
45.9
Meters
0.5
1
1.5
2
2.5
3
4
6
8
10
12
14
Code
05
1
015
2
025
3
4
6
8
10
12
14
Pinout and Color Code
Specifications
Face View Pinout
Mechanical
4-Pin
Coupling Nut
Black anodized aluminum
Housing
Black PVC
Insert
7
Black PVC
Cable Diameter
Female
8
Color Code
Electrical
Male
Contacts
3 Red
4 Green/Yellow
Extended PIN
1 Black
2 White
0.43 in. +/- 0.12 in. (10.9 mm +/- 0.5 mm) with four
16 AWG conductors
0.58 in. +/- 0.12 in. (14.7 mm +/- 0.5 mm) with four
14 AWG conductors
Brass with gold over nickel plating
Black PVC, dual rated UL TC/Open Wiring and
STOOW
Cable
Cable Rating
9
Assembly Rating
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be
used for manufacturing purposes and are subject to change.
10
Female straight
Fusing: Suitable for use on a circuit capable of
delivering not more than 65000 RMS symmetrical
amperes at 600V AC maximum when protected by
CC, J, and T class fuses, rated 40 A non-time
delay or 20 A time delay.
Environmental
59.4 (2.34)
25.4
(1.00)
25.4
(1.00)
Female 90 deg.
Short Circuit Current
Rating (SCCR)
Male straight
56.1 (2.21)
11
600V AC/DC
4-pin — 16 AWG, 600V @ 10 A
4-pin — 14 AWG, 600V @ 15 A
32.5 (1.28)
Male 90 deg.
Enclosure Type Rating
IP67, NEMA 4 & 6P; 1200 psi washdown
Operating Temperature
UL Type TC 600V 90 °C Dry 75 °C Wet, Exposed
Run (ER) or MTW 600V 90 °C or STOOW 105 °C
600V - CSA STOOW 600V FT2
32.5 (1.28)
12
40.4
(1.59)
13
43.2
(1.70)
Example of Cordset
25.4
(1.00)
25.4
(1.00)
www.ab.com/catalogs
4-98
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Example of Patchcord
Bulletin 280
Three-Phase Power Media
Product Selection/Specifications
Bulletin 280 — Three-Phase Power Tees and Reducers
(4-Pole)
Table of Contents
Approximate
Dimensions................... 4-100
Accessories.................. 4-107
Listed per UL 2237 for use in motor branch circuits per NFPA 79
− One-piece molded design
− M35 power tee
− M35 power tee with M22 reducing drop
− M35 to M22 straight reducer
4-pin T-port connects a single drop line to the trunk
4-pin configuration
0
Standards Compliance
1
UL 2237
Certifications
UL Listed (File No. E318496,
Guide PVVA)
2
Product Selection
Tees and Reducing Adapters Description
Assembly Rating
Color Code
M35, 3-Phase Power Tee, 4-pole
25 A
A
Cat. No.
280-T35
M35, 3-Phase Power Tee Reducing drop M22, 4-pole
Trunk 25 A/Drop 15 A
B
280-RT35
M35, 3-Phase Reducing Adapter, 4-pole
15 A
C
280-RA35
3
Stainless steel version may be ordered by adding S to the cat. no. (Example: Cat. No. 280S-T35)
Specifications
4
Pinout and Color Code
Mechanical
Face View Pinout
Coupling
Nut
Black anodized aluminum (Trunk),
black zinc diecast (Drop)
Housing
Black PVC
Insert
Black PVC
Assembly
Rating
Color
Code
Trunk Tee:
25 A
A
4-Pin
M35 Connector
M22 Connector
5
—
6
Electrical
Contacts
Voltage
Assembly
Rating
Short
Circuit
Current
Rating
(SCCR)
Copper alloy with gold over nickel plating
600V AC/DC
Trunk Tee: 25 A
Reducing Tee: Trunk 25 A/Drop 15 A
Reducer: 15 A
Female
Trunk Tee
Fusing: Suitable for use on a circuit capable of
delivering not more than 65000 RMS Symmetrical
Amperes at 600V AC maximum when protected by
CC, J, and T class fuses
Circuit Breaker: Suitable for use on a circuit
capable of delivering not more than 65000 RMS
Symmetrical Amperes at 480V AC maximum when
protected by Bul. 140U-H frame circuit breaker, not
rated more than 480V, 100 A and a maximum
interrupting of 65000 RMS Symmetrical Amperes.
Reducing Tee & Reducer
Fusing: Suitable for use on a circuit capable of
delivering not more than 65000 RMS Symmetrical
Amperes at 600V AC maximum when protected by
CC, J, and T class fuses, rated 40 A non-time delay
or 20 A time delay.
Environmental
Enclosure
Type
Rating
1 Black
2 Green/Yellow
Extended PIN
Reducing
Tee:
Trunk 25 A/
Drop 15 A
3 Red
4 White
7
8
B
Female
Male
1 Black
2 Green/Yellow
Extended PIN
Reducer:
Trunk 25 A/
Drop 15 A
IP67, NEMA 4 & 6P; 1200 psi washdown
Male
3 Red
4 White
Female
1 Black
2 White
3 Red
4 Green/Yellow
Extended PIN
C
Male
1 Black
2 Green/Yellow
Extended PIN
3 Red
4 White
10
Female
1 Black
2 White
9
3 Red
4 Green/Yellow
Extended PIN
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-99
Bulletin 280
Three-Phase Power Media
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes and are subject to change.
0
Reducer
112.5
(4.43)
38.1
(1.50)
M22
FEMALE
M35
MALE
#1
#1
BLACK
#2
1
#2
#3
#4
25.4
(1.00)
2
RED
#3
#4
GREEN/YELLOW
WHITE
WIRING DIAGRAM
Power Tee
108.0
(4.25)
#4 - WHITE
#1 BLACK
73.7 (2.90)
#3 - RED
#3 RED
4
#1 BLACK
#2 GREEN/YELLOW
#4 WHITE
#4 WHITE
EXTENDED PIN 2
GREEN/YELLOW LEAD
MALE
#3 RED
KEYWAY
#2 GREEN/YELLOW
#1 - BLACK
#2 - GREEN/YELLOW
FEMALE
3
FEMALE
5
WIRING DIAGRAM
19.0
(0.75)
38.0
(1.50)
Power Tee - reducing drop
108.0
(4.25)
EXTENDED PIN 2
GREEN/YELLOW LEAD
#1 - BLACK
65.3 (2.57)
#3 RED
#2 - WHITE
#1 BLACK
7
#2 GREEN/YELLOW
#4 WHITE
FEMALE
8
19.0
(0.75)
38.0
(1.50)
9
10
11
12
13
www.ab.com/catalogs
4-100
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
WIRING DIAGRAM
MALE
#3 RED
#1 BLACK
#2 WHITE
KEYWAY
#4 GREEN/YELLOW
#4 - GREEN/YELLOW
#3 - RED
FEMALE
6
Bulletin 280
Three-Phase Power Media
Product Selection/Specifications
Bulletin 280 ⎯ Three-Phase Power Receptacles
(Male and Female)
Table of Contents
Approximate
Dimensions................... 4-102
Additional
Accessories.................. 4-107
Listed per UL 2237 for use in motor branch circuits per NFPA 79
16, 14, and 10 AWG conductors
4-pin configuration, M35 or M22 connection
Female receptacles can be used for panel mount connection
Male receptacles can be used for quick disconnect motor junction
box
1/2 in.-14 NPT threads
Standards Compliance
UL 2237
0
1
Certifications
UL Listed (File No. E318496,
Guide PVVA)
2
Product Selection
Receptacles Cat. No.
Pin Count
4-pin
Assembly Rating
Color Code
Female
Male
16 AWG, 600V, 10 A
A
280-M22F-M1
280-M22M-M1
14 AWG, 600V, 15 A
A
280-M24F-M1
280-M24M-M1
10 AWG, 600V, 25 A
B
280-M35F-M1
280-M35M-M1
3
Stainless steel version may be ordered by adding S to the cat. no. (Example: Cat. No. 280S-M22F-M1)
4
Accessories
Mounting Nuts and Flat Seals
Pkg.
Quantity
Description
Mounting nuts for 1/2 in.-14 NPT threaded receptacles
10
Flat sealing washers for 1/2 in.-14 NPT threaded receptacles
Cat. No.
889A-U1NUT-10
Specifications
6
Mechanical
Insert
5
889A-U1FSL-10
Black PVC
Receptacle Shell Material
Black anodized aluminum (female) and zinc diecast, black E-coat (male)
Electrical
Contacts
Cable Rating
600V AC/DC
4-pin ⎯ 16 AWG, 600V @ 10 A
4-pin ⎯ 14 AWG, 600V @ 15 A
4-pin ⎯ 10 AWG, 600V @ 25 A
Assembly Rating
Short Circuit Current Rating
(SCCR)
7
Copper alloy with gold over nickel plating (Trunk), brass with gold over nickel plating (Drop)
4-pin — 14 or 10 AWG
Fusing: Suitable for use on a circuit capable of delivering not more than 65000 RMS Symmetrical Amperes at 600V AC
maximum when protected by CC, J, and T class fuses
Circuit Breaker: Suitable for use on a circuit capable of delivering not more than 65000 RMS Symmetrical Amperes at
480V AC maximum when protected by Bul. 140U-H frame circuit breaker, not rated more than 480V, 100 A and a maximum
interrupting of 65000 RMS Symmetrical Amperes.
4-pin — 16 AWG
Fusing: Suitable for use on a circuit capable of delivering not more than 65000 RMS Symmetrical Amperes at 600V AC
maximum when protected by CC, J, and T class fuses, rated 40 A non-time delay or 20 A time delay.
8
9
Environmental
Enclosure Type Rating
IP67, NEMA 4 & 6P; 1200 psi washdown
10
Pinout and Color Code
Face View Pinout
4-Pin
M35 Connector
Assembly Rating
Color Code
14 AWG, 600V, 15 A
16 AWG, 600V, 10 A
A
10 AWG, 600V, 25 A
B
Female
M22 Connector
Male
—
1 Black
2 Green/Yellow
Extended PIN
www.ab.com/catalogs
Female
1 Black
2 White
3 Red
4 White
11
12
Male
3 Red
4 Green/Yellow
Extended PIN
13
—
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-101
Bulletin 280
Three-Phase Power Media
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes and are subject to change.
0
18.49
(0.728)
280-M22F-M1
1
2
45.26
(1.782)
280-M35F-M1
3.81
(0.150)
12.09 (0.476)
7.32
(0.288)
3
7.62 +/-2.54
(0.30 +/- 0.10)
1000
(39.37)
11.89 (0.468)
6.35 (0.25)
1000
(39.37)
15.95
(0.628)
51.61
(2.032)
280-M22M-M1
4
280-M35M-M1
5
6.35 (0.25)
11.89 (0.468)
1000
(39.37)
28.04
(1.104)
6
4.75
(0.187)
1000
(39.37)
7
8
9
10
11
12
13
www.ab.com/catalogs
4-102
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 889N
Control Power Media
Product Selection/Specifications/Approximate Dimensions
Bulletin 889N ⎯ Control Power Trunk and Drop Cables
Table of Contents
6-pin/5-used configuration to prevent mis-wiring with network
connectors
One-piece molded design
16 AWG exposed run (TC-ER) rated cable
Accessories.................. 4-107
0
1
Product Selection
Cordsets
Cat. No.
Pin Count
6-pin/5 used
Assembly Rating
16 AWG 600V, 10 A
Straight Female
889N-F65GF-1
Right-Angle Female
889N-R65GF-1
Straight Male
889N-M65GF-1
Right-Angle Male
889N-E65GF-1
2
1 Replace symbol with code from the table below that represents the desired length:
Feet
6.5
16.4
32.8
Meters
2
5
10
Code
2
5
10
3
Patchcords
Cat. No.
Pin Count
6-pin/5 used
Assembly Rating
16 AWG 600V, 10 A
Straight Female
Straight Male
Right-Angle Female
Straight Male
Straight Female
Right-Angle Male
Right-Angle Female
Right-Angle Male
889N-F65GFNM-
889N-R65GFNM-
889N-F65GFNE-
889N-R65GFNE-
9.8
16.4
32.8
Replace symbol with code from the table below that represents the desired length:
Feet
3.3
6.5
Meters
1
2
3
5
10
Code
1
2
3
5
10
Specifications
5
6
Pinout and Color Code
Mechanical
Coupling Nut
Face View Pinout
Black epoxy coated zinc
Overmold
4
6-pin/5-used
Black Riteflex TPE
Insert
7
Yellow Riteflex TPE
Contacts
Brass/gold over palladium nickel
Cable
Grey PVC, 16 AWG, dual rated UL TC/Open
Wiring and STOOW
Cable Diameter
0.44 in. +/- 0.12 in. (11.18 mm +/- 0.5 mm)
Female
Electrical
Cable Rating
UL Type TC 600V 90 °C Dry 75 °C Wet, Open
Wiring or MTW 600V 90 °C or STOOW 105
°C 600V - CSA STOOW 600V FT2
Assembly Rating
Color Code
1 Red (+)
2 Black (-)
3 Green (GND)
8
Male
4 Blank/Not Used
5 Blue (S1)
6 White (S2)
600V, 10 A
9
Environmental
Enclosure Type Rating
IP67, NEMA 6P, 1200 psi washdown
Operating Temperature
-20…+90 °C (-4…+194 °F)
10
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes and are subject to change.
56.1 (2.21)
39.6 (1.56)
25.4
(1.0) dia.
40.6 (1.6)
25.4
(1.0) dia.
32.5
(1.28)
7/8 in.
16 UN-2B
Female 90 Deg.
32.5
(1.28)
Female Straight
11
25.4
(1.0) dia.
7/8 in.
16 UN-2B
Example of Cordset
12
59.4 (2.34)
Extended Pin 3
Male 90 Deg.
Example of Patchcord
13
Male Straight
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-103
Bulletin 898N
Control Power Media
Product Selection/Specifications/Approximate Dimensions
Bulletin 898N ⎯ Control Power T-Ports
Table of Contents
6-pin/5-used configuration to prevent mis-wiring with network
connectors
One piece molded design
Durable compact design
0
Accessories.................. 4-107
1
2
Product Selection
T-Ports
Configuration
3
E-stop out
Assembly Rating
Overmold Color
600V, 10 A
Wiring Diagram
Red
5
1
2
3
5
2
3
5
6
6
1
4
E-stop in
600V, 10 A
2
3
Black
1
2
3
5
6
Specifications
2
3
898N-653ST-NKF
5 6
Pinout and Color Code
Mechanical
Coupling Nut
7
898N-653ES-NKF
5 6
1
2
3
5
6
1
6
Cat. No.
1
Face View Pinout
Black epoxy coated zinc
Housing
6-pin/5-used
Riteflex TPE
Insert
Yellow Riteflex TPE
Contacts
Brass/gold over palladium nickel
Electrical
8
Assembly Rating
600V, 10 A
Female
Environmental
Enclosure Type Rating
IP67, NEMA 6P, 1200 psi washdown
Operating Temperature
-20…+90 °C (-4…+194 °F)
Color Code
1 Red
2 Black
3 Green
Male
4 Blank/Not Used
5 Blue
6 White
9
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes and are subject to change.
28.5
(1.12)
10
Pin 5
71.8 (2.8)
Pin 1
Pin 2 Blank
11
14.6
(0.57)
Pin 4
Pin 3
Pin 6
4.5 (0.17) Dia.
2 Places
9.8 (0.38) Dia.
2 Places
12
13
www.ab.com/catalogs
4-104
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
38
(1.49)
Bulletin 888N
Control Power Media
Product Selection/Specifications/Approximate Dimensions
Bulletin 888N ⎯ Control Power Receptacles
Table of Contents
6-pin/5-used configuration to prevent mis-wiring with network
connectors
1/2 in. - 14 NPT threads
Accessories.................. 4-107
0
1
Product Selection
Receptacles
Cat. No.
Pin Count
6-pin/5 used
Assembly Rating
16 AWG 600V, 10 A
Female
888N-D65AF1-1
2
Male
888N-M65AF1-1
1 Replace symbol with length in meters (0.3 or 1 standard)
Specifications
3
Pinout and Color Code
Mechanical
Face View Pinout
Male: Black epoxy coated zinc diecast
Female: Black anodized aluminum
Receptacle Shell
Insert
6-pin/5-used
4
Yellow PVC
Contacts
Brass/gold over palladium nickel
Electrical
Assembly Rating
600V, 10 A
Environmental
Female
Enclosure Type Rating
IP67, NEMA 6P, 1200 psi washdown
Operating Temperature
-20…+90 °C (-4…+194 °F)
Color Code
1 Red (+)
2 Black (-)
3 Green (GND)
5
Male
4 Blank/Not Used
5 Blue (S1)
6 White (S2)
6
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes and are subject to change.
7
28.1 (1.11)
12.2 (0.48)
1/2 in. 14 NPT Thread
177.8 (7.0)
3.81 (0.15)
3.81 (0.15)
7.32 (0.28)
21.3 (0.84)
Dia.
25.07
(0.98)
Dia.
4.78 (0.18)
7/8 in. 16 UNS-2A
thread
152.4/203.2 (6.0/8.0)
7/8 in. 16 UNS-2A
thread
8
Epoxy Filled
11.1
(0.44)
30.5 (1.2)
1/2 in. 14 NPT
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-105
Bulletin 889A
Control Power Media
Product Selection/Specifications/Approximate Dimensions
Bulletin 889A ⎯ Control Power Shorting Plugs
0
Table of Contents
6-pin/5-used configuration to prevent mis-wiring with network
connectors
1/2 in. - 14 NPT threads
Accessories.................. 4-107
1
2
Product Selection
Shorting Plugs
Configuration
Assembly Rating
Overmold Color
Wiring Diagram
1.
2.
3.
4.
5.
6.
3
E-stop out
Red
600V, 10 A
4
E-stop in
1.
2.
3.
4.
5.
6.
Black
5
N/C
Blank
N/C
N/C
N/C
Face View Pinout
6-pin/5-used
Riteflex TPE
Yellow Riteflex TPE
Contacts
Brass/gold over palladium nickel
Electrical
Assembly Rating
600V, 10 A
Female
Environmental
9
889A-M65SP65
Blank
Black epoxy coated zinc
Insert
8
889A-M65SP61
N/C
Mechanical
Coupling Nut
Overmold
7
N/C
Pinout and Color Code
Specifications
6
Cat. No.
Enclosure Type Rating
IP67, NEMA 6P, 1200 psi washdown
Operating Temperature
-20…+90 °C (-4…+194 °F)
Color Code
1 Red (+)
2 Black (-)
3 Green (GND)
Male
4 Blank/Not Used
5 Blue (S1)
6 White (S2)
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes and are subject to change.
25.4
(1.0)
Dia.
10
50.1 (1.97)
11
12
13
www.ab.com/catalogs
4-106
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 280, 888, 889, 898
Power Media
Accessories
Specifications
Locking Clips
Sealing Caps
ABS/PC plastics
Anodized aluminum
Black
Grey
Mechanical
Material
Color
Electrical
Non-current carrying, no ratings required
0
1
Environmental
Enclosure Type Rating
No rating required
IP67, NEMA 4 & 6P;
1200 psi washdown
2
Product Selection
3
Locking Clips
Description
Connector
Style
Pkg. Quantity
Clam shell design clips over the three-phase power media drop connection, to limit customer access.
10
Clam shell design clips over the three-phase power media trunk connection, to limit customer access.
Cat. No.
M22 Connector 280-MTRLC-M22
M35 Connector 280-MTRLC-M35
4
Sealing Caps
Connector Style
Material
Thread Configuration
Dimensions
Cat. No.
7/8 in. -16 UN
2 A Threads
External, male
5
1485A-C1
6
Gasket
Control Power (M22)
7/8 in. -16 UN
2 B Threads
Gasket
Internal, female
889A-NCAP
Aluminum grey, anodized
7
1-3/8 in. -16 UN
2A Threads
External, male
Gasket
889A-QMCAP
8
Gasket
889A-QCAP
9
3-Phase Power (M35)
1-3/8 in. -16 UN
2B Threads
Internal, female
10
Mounting Nuts and Flat Seals
Pkg.
Quantity
Description
Mounting nuts for 1/2 in.-14 NPT threaded receptacles
Flat sealing washers for 1/2 in.-14 NPT threaded receptacles
10
Cat. No.
889A-U1NUT-10
889A-U1FSL-10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-107
Bulletin 280, 888, 889, 898
Power Media
Accessories
On-Machine E-Stop Stations
0
1
2
Enclosure Type
Quick Connect
Knockout Type
Operator
Plastic
3
4
5
Mini Receptacle
Metric
Twist-to-Release
40 mm
Metal
Illumination Voltage
1
2
3
4
5
6
Red
Black
Green
Blank
Blue
White
No connection
A2 (-)
PE
Not used
A1 (+)
Not Used
120V AC
800F-1YMQ5
240V AC
24V AC/DC
800F-1MYMQ5
800F-1MYMQ6
E-Stop Station
Customer Supplied
10
Example E-Stop Circuit for EtherNet/IP Bus Version
Pin
Pin
Pin
Pin
Pin
Pin
1
2
3
4
5
6
Red
Black
Green
Blank
Blue
White
A3
A2 (-)
PE
Not used
A1 (+)
Not Used
E-Stop Station
11
12
Customer Supplied
13
www.ab.com/catalogs
4-108
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
800F-1YMQ6
800F-1MYMQ4
240V AC
7
9
1 N.O./1 N.C.
120V AC
6
8
Cat. No.
800F-1YMQ4
Example E-Stop Circuit for DeviceNet/ArmorPoint Bus Version
Pin
Pin
Pin
Pin
Pin
Pin
Contact Configuration
24V AC/DC
Bulletin 150
Reduced Voltage Starters
Product Overview/Modes of Operation
Bulletin 150 — Solid-State Reduced Voltage Starters
The Allen-Bradley SMC™ Smart Motor Controller product line offers a broad range of products for starting and stopping standard 3-phase
squirrel-cage induction motors and wye-delta motors.
0
1
SMC™-50
SMC™ Flex
SMC™-3
SMC™ Dialog
Plus
200…690V
90…xxx A♣
200…690V
1…1250 A
200…600V
1…480 A
200…600V
1…1000 A
Soft Start
S
S
S
S
S
S
Kickstart
S
S
S
S
—
—
Current Limit
S
S
S
S
—
—
Dual Ramp Start
S
S
—
S
—
—
Full Voltage
S
S
—
S
—
—
Energy Saver
S
—
—
S
—
—
Soft Stop
S
S
S
O
—
—
Pump Control
S
O
—
O
—
—
Preset Slow Speed
S
S
—
O
—
—
Linear Acceleration/Deceleration
S
S
—
—
—
—
Torque Control
S
—
—
—
—
—
SMB™ Smart Motor Braking
S
O
—
O
—
—
Accu-Stop™
S
O
—
O
—
—
S
O
—
O
—
—
NA
S
S
NA
—
—
Features
Slow Speed with Braking
Integrated Bypass Contactor
STC™
100…240V
1Ø, 1…22 A
200…600V
3Ø, 1…22 A
Integrated Motor Overload Protection
S
S
S
S
—
—
Single-phase Operation
—
—
—
—
S
—
DPI Communication
S
S
—
—
—
—
Metering
S
S
—
S
—
—
Real Time Clock
S
—
—
—
—
—
Motor Winding Heater Function
S
—
—
—
—
Diagnostic Faults and Alarms
S
S
—
—
—
—
Motor and Starter
S
—
—
—
—
—
Individual Bit Enable of Faults and
Alarms
S
—
—
—
—
—
Automatic Tuning of Motor
Parameters
S
—
—
—
—
—
Parameter
Configuration/Programming
S1
S
—
S
—
—
Human Interface Module (HIM)
O1
O
—
—
—
—
Parameter Configruation Module
O1
—
—
—
—
—
Configuration Software: Drives
Explorer and Drives Executive
O1
O
—
—
—
—
Digital I/O Expansion Module‡§
O
—
—
—
—
—
Ground Fault/CT/PTC Module‡
O
—
—
—
—
—
Network Communications
O
O
—
—
—
—
Inside Delta Connection
S
S
S
—
—
—
Standards Compliance:
CE Marked per Low Voltage Directive
73/23/EEC, 93/68/EEC
CSA Certified (File No. LR 1234)
UL Listed (File No. E96956)
S
S
S
S
S
S
Page 4-115Web♣
Page 4-115
Page 4-138
Open Style: Page
4-162
Enclosed: Web
Product Selection
Web
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
www.ab.com/catalogs.
3
4
5
6
7
8
9
10
11
12
S = Standard Feature
O = Optional Feature
1 Starter does not include a configuration device as standard.
‡ With removable terminal block.
Option using a Bulletin 1410 motor winding heater.
§ Starter ships with 2 DC inputs and 2 relay outputs as standard.
The starter is fully solid-state (no integral bypass). An external bypass contactor can be added as an option.
Note: Information for this product line is available on the Industrial Controls catalog web site: www.ab.com/catalogs.
♣ Note: Information for this product line is available in publication 150-SG010* or on the Industrial Controls catalog web site:
www.ab.com/catalogs
2
4-109
13
Bulletin 150
Reduced Voltage Starters
Modes of Operation
Modes of Operation
0
The SMC controllers provide the following modes of operation:
Soft Start
100%
2
100%
Percent Voltage
3
This starting method is useful on applications with varying loads,
starting torque, and start time requirements. Dual Ramp Start offers
the user the ability to select between two separate start profiles with
separately adjustable ramp times and initial torque settings.
Initial
Torque
Percent Voltage
1
Dual Ramp Start
This method covers the most general applications. The motor is
given an initial torque setting, which is user adjustable. From the
initial torque level, the output voltage to the motor is steplessly
increased during the acceleration ramp time, which is user
adjustable.
Initial
Torque
#2
Ramp #2
Ramp #1
Initial
Torque
#1
Start #1
Ramp Time
4
Run
Start
Selectable Kickstart
5
Full Voltage Start
6
This method is used in applications requiring across-the-line
starting. The SMC controller performs like a solid-state contactor.
Full inrush current and locked-rotor torque are realized. The SMC
may be programmed to provide full voltage start in which the output
voltage to the motor reaches full voltage.
The kickstart feature provides a boost at startup to break away
loads that may require a pulse of high torque to get started. It is
intended to provide a current pulse, for a selected period of time.
Percent Voltage
Time in Seconds
100%
Percent Voltage
7
8
This method provides current limit start and is used when it is
necessary to limit the maximum starting current. The starting current
is user adjustable. The current limit stating time is user adjustable.
600%
This method can be used on applications that require a slow speed
for positioning material. The Preset Slow Speed can be set for either
Low, 7% of base speed, or High, 15% of base speed. Reversing is
also possible through programming. Speeds provided during
reverse operation are Low, 10% of base speed, or High, 20% of
base speed.
100%
Motor Speed
Percent Full Load Current
Run
Preset Slow Speed
Current Limit Start
12
Initial
Torque
Time [s]
9
11
Kickstart
100%
Start
Time [s]
10
Run #1
Run #2
Start #2
Time [s]
Forward
15% - High
7% - Low
50%
Reverse
Time [s]
Start
Time [s]
13
www.ab.com/catalogs
4-110
Start
10% - Low
20% - High
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Run
Bulletin 150
Reduced Voltage Starters
Modes of Operation
Linear Speed Acceleration
100%
0
Accu-Stop
This option is used in applications requiring controlled position
stopping. During stopping, braking torque is applied to the motor
until it reaches preset slow speed (7% or 15% of rated speed) and
holds the motor at this speed until a stop command is given.
Braking torque is then applied until the motor reaches zero speed.
Braking current and slow speed current are user programmable.
Slow speed can be programmed for either 7% (low) or 15% (high).
Start
Run
Time [s]
Stop
Braking
Slow Speed
Slow Speed Braking
Coast-to-Rest
7% or
15%
Slow
Speed
Start
Run
3
Brake
Times [s]
4
Soft Stop
The Soft Stop option can be used in applications requiring an
extended coast-to-rest. The voltage ramp down time is user
adjustable. The load will stop when the voltage drops to a point
where the load torque is greater than the motor torque.
Pump Control
Start and Stop
Kickstart
100%
Coast-to-Rest
Soft
Stop
This option is used to reduce surges during the starting and
stopping of a centrifugal pump by smoothly accelerating and
decelerating the motor. The microprocessor analyzes the motor
variables and generates commands which control motor torque and
reduce the possibility of surges occurring in the system.
5
6
100%
Initial
Torque
Run
Time [s]
Start
Motor Speed
Percent Voltage
1
2
100%
Motor Speed
Percent Speed
With this type of acceleration mode, a closed-loop feedback system
maintains the motor acceleration at a constant rate. The required
feedback signal is provided by a DC tachometer coupled to the
motor (tachometer supplied by user 0…5V DC, 4.5V DC = 100%
speed). Kickstart is available with this mode.
Soft Stop
7
Pump Start
Run
Time [s]
Pump Stop
8
SMB Smart Motor Braking
This option provides motor braking for applications that require the
motor to stop faster than a coast to rest. Braking control, with
automatic zero speed shut off, is fully integrated into the compact
design of the SMC controller. This design facilitates a clean, straight
forward installation and eliminates the requirement for additional
hardware such as braking contactors, resistors, timers, and speed
sensors. The microprocessor based braking system applies braking
current to a standard squirrel-cage induction motor. The strength of
the braking current is user programmable.
Slow Speed with Braking
Slow Speed with Braking is used on applications that require slow
speed (in the forward direction) for positioning or alignment and also
require braking control to stop. Slow speed adjustments are 7%
(low) or 15% (high) of rated speed. Slow speed acceleration current,
slow speed running current, and braking current are all adjustable.
10
Motor Speed
SMB
Coast-to-Rest
Start
Run
Time [s]
Brake
Motor Speed
100%
100%
9
Braking
Coast-to-Rest
7% or
15%
Slow
Speed
Start
Automatic Zero
Speed Shut-Off
11
Run
Stop
12
Time [s]
13
Not intended to be used as an emergency stop. Refer to the applicable standards for emergency stop requirements.
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-111
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Overview/Modes of Operation/Features
Bulletin 150 — SMC™ Flex Smart Motor Controller
0
The SMC Flex controller provides microprocessor controlled starting
for standard 3-phase squirrel-cage induction or Wye-Delta (6-lead)
motors. Seven standard modes of operation are available within a
single controller.
1…1250 A Range
Seven Standard Start Modes
Options Include Pump Control and Braking Control
1
Features
Built in SCR Bypass/Run
Contactor
Built in Electronic Motor
Overload Protection
CT on each Phase
Metering
2
3
4
Table of Contents
Features......................... this page
Cat. No. Explanation 4-114
Product Selection ...... 4-115
Options .......................... 4-125
Accessories.................. 4-126
Specifications.............. 4-128
Approx. Dims. ............. 4-133
DPI Communication
LCD Display
Keypad Programming
Four Programmable Auxiliary
Contacts
The SMC Flex controller is available for motors rated 1…1250 A;
200…480V AC, 200…600V AC, or 230…690V AC, 50/60 Hz. In
addition to motors, the SMC Flex controller can be used to control
resistive loads.
This catalog product information is based on the minimum information needed to select an SMC soft starter for applications with low starting
torque requirements. For product selection involving loads with high starting torque requirements (large fan, rock crusher, chipper, etc.), use of
the free tools available from the Rockwell Automation Website is recommended:
http://www.ab.com/industrialcontrols/products/solid-state_motor_control/software/
5
6
7
8
Standards Compliance
Certifications
UL 508
CSA C22.2 No.14
EN/IEC 60947-1
EN/IEC 60947-4-2
cULus Listed (Open Type) (File No. E96956, Guides NMFT, NMFT7)
CSA Certified (File No. LR 1234)
CE Marked
CCC Certified
Modes of Operation
Optional Modes of Operation
Pump Control
The SMC Flex controller provides the following modes of operation
as standard:
Soft Start
Full Voltage Start
Selectable Kickstart
Linear Speed Acceleration
Current Limit Start
Preset Slow Speed
Dual Ramp Start
Soft Stop
Start and Stop
Braking Control
SMB ⎯ Smart Motor Braking
Slow Speed with Braking
Accu-Stop
Note: For detailed information about the different modes of operation, see page 4-109.
Description of Features
9
10
11
12
Electronic Motor Overload Protection
The SMC Flex controller incorporates, as standard, electronic motor
overload protection. This overload protection is accomplished
electronically with an I2t algorithm.
When coordinated with the proper short-circuit protection, overload
protection is intended to protect the motor, motor controller, and
power wiring against overheating caused by excessive overcurrent.
The SMC Flex controller meets applicable requirements as a motor
overload protective device.
The controller’s overload protection is programmable, providing the
user with flexibility. The overload trip class consists of either OFF,
10, 15, 20, or 30 protection. The trip current is programmed by
entering the motor full-load current rating, service factor, and
selecting the trip class.
Thermal memory is included to accurately model motor operating
temperature. Ambient temperature insensitivity is inherent in the
electronic design of the overload.
Undervoltage Protection
The SMC Flex controller’s undervoltage protection will halt motor
operation if a drop in the incoming line voltage is detected.
The undervoltage trip level is adjustable as a percentage of the
programmed line voltage, from 0…99%. To eliminate nuisance trips,
a programmable undervoltage trip delay time of 0…99 seconds can
also be programmed. The line voltage must remain below the
undervoltage trip level during the programmed delay time.
Overvoltage Protection
If a rise in the incoming line voltage is detected, the SMC Flex
controller’s overvoltage protection will halt motor operation.
The overvoltage trip level is adjustable as a percentage of the
programmed line voltage, from 0…199%. To eliminate nuisance
trips, a programmable overvoltage trip delay time of 0…99 seconds
can also be programmed. The line voltage must remain above the
overvoltage trip level during the programmed delay time.
13
www.ab.com/catalogs
4-112
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Features
Stall Protection and Jam Detection
Motors can experience locked-rotor currents and develop high
torque levels in the event of a stall or a jam. These conditions can
result in winding insulation breakdown or mechanical damage to the
connected load. The SMC Flex controller provides both stall
protection and jam detection for enhanced motor and system
protection. Stall protection allows the user to program a maximum
stall protection delay time from 0…10 seconds. The stall protection
delay time is in addition to the programmed start time and begins
only after the start time has timed out. If the controller senses that
the motor is stalled, it will shut down after the delay period has
expired. Jam detection allows the user to determine the motor jam
detection level as a percentage of the motor’s full-load current
rating. To prevent nuisance tripping, a jam detection delay time,
from 0.0…99.0 seconds, can be programmed. This allows the user
to select the time delay required before the SMC Flex controller will
trip on a motor jam condition. The motor current must remain above
the jam detection level during the delay time. Jam detection is
active only after the motor has reached full speed.
Underload Protection
Utilizing the underload protection of the SMC Flex controller, motor
operation can be halted if a drop in current is sensed.
The SMC Flex controller provides an adjustable underload trip
setting from 0…99% of the programmed motor full-load current
rating with an adjustable trip delay time of 0…99 seconds.
Keypad Programming
Programming of parameters is accomplished through a five-button
keypad on the front of the SMC Flex controller. The five buttons
include up and down arrows, an Enter button, a Select button, and
an Escape button. The user needs only to enter the correct
sequence of keystrokes for programming the SMC Flex controller.
0
Auxiliary Contacts
Four fully programmable hard contacts are furnished as standard
with the SMC Flex controller:
1
Voltage Unbalance Protection
Voltage unbalance is detected by monitoring the 3-phase supply
voltage magnitudes in conjunction with the rotational relationship of
the three phases. The controller will halt motor operation when the
calculated voltage unbalance reaches the user-programmed trip
level.
The voltage unbalance trip level is programmable from 0…25%
unbalance.
PTC Input
A motor PTC input can be monitored by the SMC Flex. In the event
of a fault, the SMC Flex will shut down and indicate a motor PTC
fault.
Aux #1, Aux #2, Aux #3, Aux #4
N.O./N.C.
Normal/Up-to-Speed/External Bypass/Fault/Alarm/Network
Ground Fault Input
The SMC Flex can monitor for ground fault conditions. An external
core balance current transformer is required for this function. See
SMC Flex User Manual for additional information.
Tach Input
A motor tachometer is required for the Linear Speed Start mode.
Please see the Specifications section on page 4-127 for tachometer
characteristics.
2
3
4
5
Excessive Starts Per Hour
The SMC Flex controller allows the user to program the allowed
number of starts per hour (up to 99). This helps eliminate motor
stress caused by repeated starting during a short time period.
6
Metering
Power monitoring parameters include:
3-phase current
Power Factor
3-phase voltage
Motor thermal capacity usage
Power in kW or mW
Elapsed time
Power usage in kWH or mWH
7
8
Note: The motor thermal capacity usage allows the user to monitor
the amount of overload thermal capacity usage before the
SMC Flex controller’s built-in electronic overload trips.
9
Built-in DPI Communication Capabilities
A serial interface port is provided as standard, which allows
connection to a Bulletin 20 Human Interface Module and a variety of
Bulletin 20-COMM Communication Modules. This includes AllenBradley Remote I/O, DeviceNet, ControlNet, Ethernet, ProfiBUS,
Interbus, and RS485-DF1.
10
LCD Display
The SMC Flex controller’s three-line 16-character backlit LCD
display provides parameter identification using clear, informative
text. Controller set up can be performed quickly and easily without
the use of a reference manual. Parameters are arranged in an
organized four-level menu structure for ease of programming and
fast access to parameters.
11
Network I/O
The SMC Flex can have up to two inputs and four outputs
controlled via a communication network. The output contacts use
the auxiliary contacts.
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-113
Bulletin 150
SMC™ Flex Smart Motor Controllers
Catalog Number Explanation
Open and Non-Combination
150 – F135
F
B
D
c
d
c
e
a
Bulletin Number
Enclosure Type
0
1
a
Code
Description
150
Solid-State Controller
150B
Enclosed Solid-State Controller with
Isolation Contactor
b
2
4
6
Description
Code
Description
F
D
100…240V AC (5…480 A units)
R
24V AC/DC (5…480 A units) (Open Only)
J
NEMA Type 12 (IP54)
E
110/120V AC (625…1250 A units)
N
Open
A
230/240V AC (625…1250 A units)
d
f
Input Line Voltage
Options (Select Only One)
Open Type
F5
5 A, 3 Hp @ 460V AC
25 A, 15 Hp @ 460V AC
Code
Description
Blank
Standard
F43
43 A, 30 Hp @ 460V AC
B
200…460V AC, 3-phase, 50 and 60 Hz
B
Pump Control
F60
60 A, 40 Hp @ 460V AC
C
200…575V AC, 3-phase, 50 and 60 Hz
D
Braking Control
F85
85 A, 60 Hp @ 460V AC
Z
F108
108 A, 75 Hp @ 460V AC
230…690V AC, 3-phase, 50 and 60 Hz
(Open Only, 108 A and above)
F135
135 A, 100 Hp @ 460V AC
F201
201 A, 150 Hp @ 460V AC
F317
317 A, 250 Hp @ 460V AC
F361
361 A, 300 Hp @ 460V AC
F480
480 A, 400 Hp @ 460V AC
F625
625 A, 500 Hp @ 460V AC
F780
780 A, 600 Hp @ 460V AC
F970
970 A, 800 Hp @ 460V AC
F1250
1250 A, 1000 Hp @ 460V AC
Code
H
Options (Non-Combination only)
(see page 4-125 for a full listing)
200…208V AC, 3-phase, 50 and 60 Hz
A
230V AC, 3-phase, 50 and 60 Hz
Code
Description
B
400…460V AC, 3-phase, 50 and 60 Hz
8L
C
500…575V AC, 3-phase, 50 and 60 Hz
Line-Mounted Protective Module
(enclosed only)
8M
Load-Mounted Protective Module
(enclosed only)
8B
Line- and Load-Mounted Protective
Modules (enclosed only)
Load-side MOVs are not available with Pump
and Braking options, or on delta-connected
motors. MOVs can be field installed for open
type units.
152H – F480
a
b
F
BD
B – 59 – 8B
c
d
c
e
a
Bulletin Number
f
e
Enclosure Type
Control Options
Code
Description
Code
Description
Code
Solid-State Controller with Fusible
Disconnect
F
NEMA Type 4/12 (IP65)
Blank
Standard
J
NEMA Type 12 (IP54)
B
Pump Control
D
Braking Control
Solid-State Controller with Fusible
Disconnect and Isolation Contactor
153B
g
Solid-State Controller with Circuit Breaker
and Isolation Contactor
b
12
13
Description
153H Solid-State Controller with Circuit Breaker
d
Options (see page 4-125 for a full listing)
Code
Description
Code
Description
8L
Line-Mounted Protective Module
HD
200…208V AC, 3-phase, 50 and 60 Hz
8M
Load-Mounted Protective Module
AD
230V AC, 3-phase, 50 and 60 Hz
8B
BD
400…460V AC, 3-phase, 50 and 60 Hz
Line- and Load-Mounted Protective
Modules
CD
500…575V AC, 3-phase, 50 and 60 Hz
Line Voltage, 120V AC Control Voltage
11
g
152H
152B
10
Description
g
Non-Combination Enclosed Only
251 A, 200 Hp @ 460V AC
7
9
e
Control Voltage
F25
Combination
8
g
NEMA Type 4/12 (IP65)
(Non-Combination Only)
Description
F251
5
f
Code
Controller Ratings
Code
3
b
B – 8L
Controller Ratings
Code
Description
F5
5 A, 3 Hp @ 460V AC
F25
25 A, 15 Hp @ 460V AC
F43
43 A, 30 Hp @ 460V AC
F60
60 A, 40 Hp @ 460V AC
f
F85
85 A, 60 Hp @ 460V AC
Horsepower
F108
108 A, 75 Hp @ 460V AC
F135
135 A, 100 Hp @ 460V AC
Cat.
No.
F201
201 A, 150 Hp @ 460V AC
F251
251 A, 200 Hp @ 460V AC
F317
Hp
Rating
Cat.
No.
33
0.5
34
0.75
317 A, 250 Hp @ 460V AC
35
F361
361 A, 300 Hp @ 460V AC
F480
Load-side MOVs are not available with Pump
and Braking options, or when used with insidethe-delta connections.
Hp
Rating
Cat.
No.
Hp
Rating
Cat.
No.
Hp
Rating
Cat.
No.
Hp
Rating
39
5
46
40
52
150
60
450
40
7.5
47
50
54
200
61
500
1
41
10
48
60
56
250
62
600
36
1.5
42
15
49
75
57
300
63
700
480 A, 400 Hp @ 460V AC
37
2
43
20
50
100
58
350
65
800
F625
625 A, 500 Hp @ 460V AC
38
3
44
25
51
125
59
400
67
1000
F780
780 A, 600 Hp @ 460V AC
—
—
45
30
—
—
—
—
—
—
www.ab.com/catalogs
4-114
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Open Type and Non-Combination Enclosed (IP65, Type 4/12) Controllers ⎯ For use with Line-Connected Motors
0
Enclosures other than those listed are available; consult your local Rockwell Automation sales office or Allen-Bradley distributor.
Rated Voltage Motor Current
[A]
[V AC]
Max. kW,
50 Hz
1…5
⎯
1
5...25
⎯
5
8.6...43
⎯
10
12...60
⎯
15
17...85
⎯
25
27…108
⎯
30
34…135
67…201
⎯
⎯
40
60
200/208
84…251
106…317
120…361
⎯
⎯
⎯
75
100
125
160…480
⎯
150
208…625
⎯
200
260…780
⎯
250
323…970
⎯
350
416…1250
⎯
Open Type — Line-Connected
Motors1
Max. Hp,
60 Hz
400
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§®
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-F5NBD
150-F5FHD
24V AC/DC♣
150-F5NBR
—
100…240V AC, 50/60 Hz
150-F25NBD
150-F25FHD
24V AC/DC♣
150-F25NBR
—
100…240V AC, 50/60 Hz
150-F43NBD
150-F43FHD
24V AC/DC♣
150-F43NBR
—
100…240V AC, 50/60 Hz
150-F60NBD
150-F60FHD
24V AC/DC♣
150-F60NBR
—
100…240V AC, 50/60 Hz
150-F85NBD
150-F85FHD
24V AC/DC♣
150-F85NBR
—
100…240V AC, 50/60 Hz
150-F108NBD
150-F108FHD
24V AC/DC♣
150-F108NBR
—
100…240V AC, 50/60 Hz
150-F135NBD
150-F135FHD
24V AC/DC♣
150-F135NBR
—
100…240V AC, 50/60 Hz
150-F201NBD
150-F201FHD
24V AC/DC♣
150-F201NBR
—
100…240V AC, 50/60 Hz
150-F251NBD
150-F251FHD
24V AC/DC♣
150-F251NBR
—
100…240V AC, 50/60 Hz
150-F317NBD
150-F317FHD
24V AC/DC♣
150-F317NBR
—
100…240V AC, 50/60 Hz
150-F361NBD
150-F361FHD
24V AC/DC♣
150-F361NBR
—
100…240V AC, 50/60 Hz
150-F480NBD
150-F480FHD
24V AC/DC♣
150-F480NBR
—
1
2
3
4
5
6
110/120V AC, 50/60 Hz
150-F625NBE
150-F625JHE
230/240V AC, 50/60 Hz
150-F625NBA
150-F625JHA
110/120V AC, 50/60 Hz
150-F780NBE
150-F780JHE
230/240V AC, 50/60 Hz
150-F780NBA
150-F780JHA
110/120V AC, 50/60 Hz
150-F970NBE
—
230/240V AC, 50/60 Hz
150-F970NBA
—
110/120V AC, 50/60 Hz
150-F1250NBE
—
230/240V AC, 50/60 Hz
150-F1250NBA
—
7
8
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a
potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation
technical support for further guidance.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
® Line and load termination are provided as standard.
Available in IP54 (Type 12) enclosure only.
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-115
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
0
1
Open Type and Non-Combination Enclosed (IP65, Type 4/12) Controllers ⎯ For use with Line-Connected Motors,
Continued
Enclosures other than those listed are available; consult your local Rockwell Automation sales office or Allen-Bradley distributor.
Rated Voltage Motor Current
[A]
[V AC]
1…5
5...25
2
8.6...43
12...60
3
17...85
27…108
4
34…135
67…201
Max. kW,
50 Hz
1.1
5.5
11
15
22
30
37
55
1
7.5
15
20
30
40
50
75
230
5
84…251
106…317
120…361
6
160…480
208…625
7
75
90
110
132
200
100
125
150
200
250
260…780
250
300
323…970
315
400
8
416…1250
400
Open Type — Line-Connected
Motors1
Max. Hp,
60 Hz
500
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§®
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-F5NBD
150-F5FAD
24V AC/DC♣
150-F5NBR
—
100…240V AC, 50/60 Hz
150-F25NBD
150-F25FAD
24V AC/DC♣
150-F25NBR
—
100…240V AC, 50/60 Hz
150-F43NBD
150-F43FAD
24V AC/DC♣
150-F43NBR
—
100…240V AC, 50/60 Hz
150-F60NBD
150-F60FAD
24V AC/DC♣
150-F60NBR
—
100…240V AC, 50/60 Hz
150-F85NBD
150-F85FAD
24V AC/DC♣
150-F85NBR
—
100…240V AC, 50/60 Hz
150-F108NBD
150-F108FAD
24V AC/DC♣
150-F108NBR
—
100…240V AC, 50/60 Hz
150-F135NBD
150-F135FAD
24V AC/DC♣
150-F135NBR
—
100…240V AC, 50/60 Hz
150-F201NBD
150-F201FAD
24V AC/DC♣
150-F201NBR
—
100…240V AC, 50/60 Hz
150-F251NBD
150-F251FAD
24V AC/DC♣
150-F251NBR
—
100…240V AC, 50/60 Hz
150-F317NBD
150-F317FAD
24V AC/DC♣
150-F317NBR
—
100…240V AC, 50/60 Hz
150-F361NBD
150-F361FAD
24V AC/DC♣
150-F361NBR
—
100…240V AC, 50/60 Hz
150-F480NBD
150-F480FAD
—
24V AC/DC♣
150-F480NBR
110/120V AC, 50/60 Hz
150-F625NBE
150-F625JAE
230/240V AC, 50/60 Hz
150-F625NBA
150-F625JAA
110/120V AC, 50/60 Hz
150-F780NBE
150-F780JAE
230/240V AC, 50/60 Hz
150-F780NBA
150-F780JAA
110/120V AC, 50/60 Hz
150-F970NBE
—
230/240V AC, 50/60 Hz
150-F970NBA
—
110/120V AC, 50/60 Hz
150-F1250NBE
—
230/240V AC, 50/60 Hz
150-F1250NBA
—
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
9
10
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a
potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation
technical support for further guidance.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
® Line and load termination are provided as standard.
Available in IP54 (Type 12) enclosure only.
11
12
13
www.ab.com/catalogs
4-116
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Open Type and Non-Combination Enclosed (IP65, Type 4/12) Controllers ⎯ For use with Line-Connected Motors,
Continued
0
Enclosures other than those listed are available; consult your local Rockwell Automation sales office or Allen-Bradley distributor.
Rated Voltage Motor Current
[A]
[V AC]
1…5
5...25
Max. kW,
50 Hz
2.2
11
3
15
8.6...43
22
30
12...60
30
40
17...85
45
60
27…108
55
75
34…135
75
100
67…201
110
150
400/415/460
84…251
106…317
120…361
160…480
208…625
260…780
323…970
416…1250
132
160
200
250
355
450
560
710
Open Type — Line-Connected
Motors1
Max. Hp,
60 Hz
200
250
300
400
500
600
800
1000
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§®
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-F5NBD
150-F5FBD
24V AC/DC♣
150-F5NBR
—
100…240V AC, 50/60 Hz
150-F25NBD
150-F25FBD
24V AC/DC♣
150-F25NBR
—
100…240V AC, 50/60 Hz
150-F43NBD
150-F43FBD
24V AC/DC♣
150-F43NBR
—
100…240V AC, 50/60 Hz
150-F60NBD
150-F60FBD
24V AC/DC♣
150-F60NBR
—
100…240V AC, 50/60 Hz
150-F85NBD
150-F85FBD
24V AC/DC♣
150-F85NBR
—
100…240V AC, 50/60 Hz
150-F108NBD
150-F108FBD
24V AC/DC♣
150-F108NBR
—
100…240V AC, 50/60 Hz
150-F135NBD
150-F135FBD
24V AC/DC♣
150-F135NBR
—
100…240V AC, 50/60 Hz
150-F201NBD
150-F201FBD
24V AC/DC♣
150-F201NBR
—
100…240V AC, 50/60 Hz
150-F251NBD
150-F251FBD
24V AC/DC♣
150-F251NBR
—
100…240V AC, 50/60 Hz
150-F317NBD
150-F317FBD
24V AC/DC♣
150-F317NBR
—
100…240V AC, 50/60 Hz
150-F361NBD
150-F361FBD
24V AC/DC♣
150-F361NBR
—
100…240V AC, 50/60 Hz
150-F480NBD
150-F480FBD
1
2
3
4
5
6
—
24V AC/DC♣
150-F480NBR
110/120V AC, 50/60 Hz
150-F625NBE
150-F625JBE
230/240V AC, 50/60 Hz
150-F625NBA
150-F625JBA
110/120V AC, 50/60 Hz
150-F780NBE
150-F780JBE
230/240V AC, 50/60 Hz
150-F780NBA
150-F780JBA
110/120V AC, 50/60 Hz
150-F970NBE
—
230/240V AC, 50/60 Hz
150-F970NBA
—
110/120V AC, 50/60 Hz
150-F1250NBE
—
230/240V AC, 50/60 Hz
150-F1250NBA
—
7
8
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a
potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation
technical support for further guidance.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
® Line and load termination are provided as standard.
Available in IP54 (Type 12) enclosure only.
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-117
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Open Type and Non-Combination Enclosed (IP65, Type 4/12) Controllers ⎯ For use with Line-Connected Motors,
Continued
0
Enclosures other than those listed are available; consult your local Rockwell Automation sales office or Allen-Bradley distributor.
Rated Voltage
[V AC]
Motor Current
[A]
1...5
1
5...25
8.6...43
2
12...60
17...85
3
27…108
34…135
67…201
4
106…317
5
120…361
160…480
6
208…625
7
Rated Voltage
[V AC]
9
10
2.2
3
15
20
22
40
37
50
55
75
75
100
90
125
132
200
690/Y‡
11
160
250
200
300
250
350
315
500
450
600
260…780
560
800
323…970
710
1000
1300
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§®
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-F5NCD
150-F5FCD
Max. kW, 50 Hz Max. Hp, 60 Hz
500/575
84…251
8
Open Type — Line-Connected
Motors1
24V AC/DC♣
150-F5NCR
—
100…240V AC, 50/60 Hz
150-F25NCD
150-F25FCD
24V AC/DC♣
150-F25NCR
—
100…240V AC, 50/60 Hz
150-F43NCD
150-F43FCD
24V AC/DC♣
150-F43NCR
—
100…240V AC, 50/60 Hz
150-F60NCD
150-F60FCD
24V AC/DC♣
150-F60NCR
—
100…240V AC, 50/60 Hz
150-F85NCD
150-F85FCD
24V AC/DC♣
150-F85NCR
—
100…240V AC, 50/60 Hz
150-F108NCD
150-F108FCD
24V AC/DC♣
150-F108NCR
—
100…240V AC, 50/60 Hz
150-F135NCD
150-F135FCD
24V AC/DC♣
150-F135NCR
—
100…240V AC, 50/60 Hz
150-F201NCD
150-F201FCD
24V AC/DC♣
150-F201NCR
—
100…240V AC, 50/60 Hz
150-F251NCD
150-F251FCD
24V AC/DC♣
150-F251NCR
—
100…240V AC, 50/60 Hz
150-F317NCD
150-F317FCD
24V AC/DC♣
150-F317NCR
—
100…240V AC, 50/60 Hz
150-F361NCD
150-F361FCD
24V AC/DC♣
150-F361NCR
—
100…240V AC, 50/60 Hz
150-F480NCD
150-F480FCD
—
24V AC/DC♣
150-F480NCR
110/120V AC, 50/60 Hz
150-F625NCE
150-F625JCE
230/240V AC, 50/60 Hz
150-F625NCA
150-F625JCA
110/120V AC, 50/60 Hz
150-F780NCE
150-F780JCE
230/240V AC, 50/60 Hz
150-F780NCA
150-F780JCA
110/120V AC, 50/60 Hz
150-F970NCE
—
230/240V AC, 50/60 Hz
150-F970NCA
—
110/120V AC, 50/60 Hz
150-F1250NCE
—
230/240V AC, 50/60 Hz
150-F1250NCA
—
416…1250
900
Motor Current
[A]
Max. kW,
50 Hz
Max. Hp,
60 Hz
Control Power
Cat. No.
27…108
90
100
100…240V AC, 50/60 Hz
150-F108NZD
34…135
132
175
100…240V AC, 50/60 Hz
150-F135NZD
67…201
160
200
100…240V AC, 50/60 Hz
150-F201NZD
150-F251NZD
Open Type — Line-Connected Motors1
84…251
200
250
100…240V AC, 50/60 Hz
106…317
315
400
100…240V AC, 50/60 Hz
150-F317NZD
120…361
355
450
100…240V AC, 50/60 Hz
150-F361NZD
160…480
450
600
100…240V AC, 50/60 Hz
150-F480NZD
110/120V AC, 50/60 Hz
150-F625NZE
230/240V AC, 50/60 Hz
150-F625NZA
208…625
630
800
260…780
800
1000
323…970
1000
1300
416…1250
1200
1600
110/120V AC, 50/60 Hz
150-F780NZE
230/240V AC, 50/60 Hz
150-F780NZA
110/120V AC, 50/60 Hz
150-F970NZE
230/240V AC, 50/60 Hz
150-F970NZA
110/120V AC, 50/60 Hz
150-F1250NZE
230/240V AC, 50/60 Hz
150-F1250NZA
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
12
13
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially
high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for
further guidance.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate
option code to the catalog string.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
® Line and load termination are provided as standard.
‡ To be used only in a Y-type system.
Available in IP54 (Type 12) enclosure only.
www.ab.com/catalogs
4-118
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors
Rated Voltage
[V AC]
0
Open Type1
Motor Current [A]
Max. kW, 50 Hz
Max. Hp, 60 Hz
1.7…8.7
—
2
8.7…43
14.9…74
20.8…104
29.4…147
47…187
59…234
116…348
—
10
—
20
—
30
—
40
—
60
—
75
—
100
200/208
145…435
183…549
—
150
—
200
208…625
—
200
277…831
—
300
283…850
—
300
300…900
—
300
400…1200
—
400
533…1600
—
500
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-F5NBD
24V AC/DC♣
150-F5NBR
100…240V AC, 50/60 Hz
150-F25NBD
24V AC/DC♣
150-F25NBR
100…240V AC, 50/60 Hz
150-F43NBD
24V AC/DC♣
150-F43NBR
100…240V AC, 50/60 Hz
150-F60NBD
24V AC/DC♣
150-F60NBR
100…240V AC, 50/60 Hz
150-F85NBD
24V AC/DC♣
150-F85NBR
100…240V AC, 50/60 Hz
150-F108NBD
24V AC/DC♣
150-F108NBR
100…240V AC, 50/60 Hz
150-F135NBD
24V AC/DC♣
150-F135NBR
100…240V AC, 50/60 Hz
150-F201NBD
24V AC/DC♣
150-F201NBR
100…240V AC, 50/60 Hz
150-F251NBD
24V AC/DC♣
150-F251NBR
100…240V AC, 50/60 Hz
150-F317NBD
24V AC/DC♣
150-F317NBR
100…240V AC, 50/60 Hz
150-F361NBD
24V AC/DC♣
150-F361NBR
100…240V AC, 50/60 Hz
150-F480NBD
24V AC/DC♣
150-F480NBR
110/120V AC, 50/60 Hz
150-F625NBE
230/240V AC, 50/60 Hz
150-F625NBA
110/120V AC, 50/60 Hz
150-F780NBE
230/240V AC, 50/60 Hz
150-F780NBA
110/120V AC, 50/60 Hz
150-F970NBE
230/240V AC, 50/60 Hz
150-F970NBA
110/120V AC, 50/60 Hz
150-F1250NBE
230/240V AC, 50/60 Hz
150-F1250NBA
1
2
3
4
5
6
7
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a
potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation
technical support for further guidance.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-119
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors, Continued
0
Rated Voltage
[V AC]
Open Type1
Motor Current [A]
1.7…8.7
1
8.7…43
14.9…74
20.8…104
2
29.4…147
47…187
3
59…234
116…348
4
2.2
Max. Hp, 60 Hz
2
11
15
22
25
30
40
45
50
55
60
75
75
110
125
230
145…435
183…549
5
208…625
277…831
6
7
8
Max. kW, 50 Hz
132
150
160
200
200
250
250
350
283…850
250
350
300…900
250
350
400…1200
400
400
533…1600
500
600
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-F5NBD
24V AC/DC♣
150-F5NBR
100…240V AC, 50/60 Hz
150-F25NBD
24V AC/DC♣
150-F25NBR
100…240V AC, 50/60 Hz
150-F43NBD
24V AC/DC♣
150-F43NBR
100…240V AC, 50/60 Hz
150-F60NBD
24V AC/DC♣
150-F60NBR
100…240V AC, 50/60 Hz
150-F85NBD
24V AC/DC♣
150-F85NBR
100…240V AC, 50/60 Hz
150-F108NBD
24V AC/DC♣
150-F108NBR
100…240V AC, 50/60 Hz
150-F135NBD
24V AC/DC♣
150-F135NBR
100…240V AC, 50/60 Hz
150-F201NBD
24V AC/DC♣
150-F201NBR
100…240V AC, 50/60 Hz
150-F251NBD
24V AC/DC♣
150-F251NBR
100…240V AC, 50/60 Hz
150-F317NBD
24V AC/DC♣
150-F317NBR
100…240V AC, 50/60 Hz
150-F361NBD
24V AC/DC♣
150-F361NBR
100…240V AC, 50/60 Hz
150-F480NBD
24V AC/DC♣
150-F480NBR
110/120V AC, 50/60 Hz
150-F625NBE
230/240V AC, 50/60 Hz
150-F625NBA
110/120V AC, 50/60 Hz
150-F780NBE
230/240V AC, 50/60 Hz
150-F780NBA
110/120V AC, 50/60 Hz
150-F970NBE
230/240V AC, 50/60 Hz
150-F970NBA
110/120V AC, 50/60 Hz
150-F1250NBE
230/240V AC, 50/60 Hz
150-F1250NBA
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a
potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation
technical support for further guidance.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
9
10
11
12
13
www.ab.com/catalogs
4-120
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors, Continued
Rated Voltage
[V AC]
0
Open Type1
Motor Current [A]
Max. kW, 50 Hz
Max. Hp, 60 Hz
1.7…8.7
4
5
8.7…43
14.9…74
20.8…104
29.4…147
47…187
59…234
116…348
22
30
37
50
55
75
75
100
90
150
132
150
160
250
400/415/460
145…435
183…549
250
350
315
450
208…625
355
500
277…831
450
700
283…850
500
700
300…900
500
700
400…1200
710
1000
533…1600
900
1400
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-F5NBD
24V AC/DC♣
150-F5NBR
100…240V AC, 50/60 Hz
150-F25NBD
24V AC/DC♣
150-F25NBR
100…240V AC, 50/60 Hz
150-F43NBD
24V AC/DC♣
150-F43NBR
100…240V AC, 50/60 Hz
150-F60NBD
24V AC/DC♣
150-F60NBR
100…240V AC, 50/60 Hz
150-F85NBD
24V AC/DC♣
150-F85NBR
100…240V AC, 50/60 Hz
150-F108NBD
24V AC/DC♣
150-F108NBR
100…240V AC, 50/60 Hz
150-F135NBD
24V AC/DC♣
150-F135NBR
100…240V AC, 50/60 Hz
150-F201NBD
24V AC/DC♣
150-F201NBR
100…240V AC, 50/60 Hz
150-F251NBD
24V AC/DC♣
150-F251NBR
100…240V AC, 50/60 Hz
150-F317NBD
24V AC/DC♣
150-F317NBR
100…240V AC, 50/60 Hz
150-F361NBD
24V AC/DC♣
150-F361NBR
100…240V AC, 50/60 Hz
150-F480NBD
24V AC/DC♣
150-F480NBR
110/120V AC, 50/60 Hz
150-F625NBE
230/240V AC, 50/60 Hz
150-F625NBA
110/120V AC, 50/60 Hz
150-F780NBE
230/240V AC, 50/60 Hz
150-F780NBA
110/120V AC, 50/60 Hz
150-F970NBE
230/240V AC, 50/60 Hz
150-F970NBA
110/120V AC, 50/60 Hz
150-F1250NBE
230/240V AC, 50/60 Hz
150-F1250NBA
1
2
3
4
5
6
7
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a
potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation
technical support for further guidance.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-121
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors, Continued
0
Rated Voltage
[V AC]
Open Type1
Motor Current [A]
1.7…8.7
1
8.7…43
14.9…74
20.8…104
2
29.4…147
47…187
3
59…234
116…348
4
5.5
Max. Hp, 60 Hz
7.5
15
40
45
60
55
100
90
150
132
150
160
200
250
300
500/575
145…435
183…549
5
208…625
277…831
6
283…850
7
8
Max. kW, 50 Hz
315
400
400
500
450
600
560
900
560
900
300…900
630
900
400…1200
800
1300
533…1600
1100
1600
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-F5NCD
24V AC/DC♣
150-F5NCR
100…240V AC, 50/60 Hz
150-F25NCD
24V AC/DC♣
150-F25NCR
100…240V AC, 50/60 Hz
150-F43NCD
24V AC/DC♣
150-F43NCR
100…240V AC, 50/60 Hz
150-F60NCD
24V AC/DC♣
150-F60NCR
100…240V AC, 50/60 Hz
150-F85NCD
24V AC/DC♣
150-F85NCR
100…240V AC, 50/60 Hz
150-F108NCD
24V AC/DC♣
150-F108NCR
100…240V AC, 50/60 Hz
150-F135NCD
24V AC/DC♣
150-F135NCR
100…240V AC, 50/60 Hz
150-F201NCD
24V AC/DC♣
150-F201NCR
100…240V AC, 50/60 Hz
150-F251NCD
24V AC/DC♣
150-F251NCR
100…240V AC, 50/60 Hz
150-F317NCD
24V AC/DC♣
150-F317NCR
100…240V AC, 50/60 Hz
150-F361NCD
24V AC/DC♣
150-F361NCR
100…240V AC, 50/60 Hz
150-F480NCD
24V AC/DC♣
150-F480NCR
110/120V AC, 50/60 Hz
150-F625NCE
230/240V AC, 50/60 Hz
150-F625NCA
110/120V AC, 50/60 Hz
150-F780NCE
230/240V AC, 50/60 Hz
150-F780NCA
110/120V AC, 50/60 Hz
150-F970NCE
230/240V AC, 50/60 Hz
150-F970NCA
110/120V AC, 50/60 Hz
150-F1250NCE
230/240V AC, 50/60 Hz
150-F1250NCA
1 Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See page 4-126 for terminal lug kits.
Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a
potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation
technical support for further guidance.
♣ Separate 120V or 240V single-phase power supply is required for fan operation.
9
10
11
12
13
www.ab.com/catalogs
4-122
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Combination Line-Connected Controllers — IP65 (Type 4/12) Enclosed with Fusible Disconnect or Circuit Breaker
Rated
Voltage
[V AC]
200
230
IP65 (Type 4/12) Enclosed Combination
Controllers with Fusible Disconnect1
IP65 (Type 4/12) Enclosed Combination
Controllers with Circuit Breaker1
kW, 50 Hz
Hp, 60 Hz
Controller Current
Rating [A] Cat. No.§
Cat. No.
—
0.5
5
152H-F5FHD-33
153H-F5FHD-33
—
0.75
5
152H-F5FHD-34
153H-F5FHD-34
—
1
5
152H-F5FHD-35
153H-F5FHD-35
—
1.5
25
152H-F25FHD-36
153H-F25FHD-36
—
2
25
152H-F25FHD-37
153H-F25FHD-37
—
3
25
152H-F25FHD-38
153H-F25FHD-38
—
5
25
152H-F25FHD-39
153H-F25FHD-39
—
5
25
152H-F25FHD-40
153H-F25FHD-40
—
10
43
152H-F43FHD-41
153H-F43FHD-41
—
15
60
152H-F60FHD-42
153H-F60FHD-42
—
20
85
152H-F85FHD-43
153H-F85FHD-43
—
25
85
152H-F85FHD-44
153H-F85FHD-44
—
30
108
152H-F108FHD-45
153H-F108FHD-45
—
40
135
152H-F135FHD-46
153H-F135FHD-46
—
50
201
152H-F201FHD-47
153H-F201FHD-47
—
60
201
152H-F201FHD-48
153H-F201FHD-48
—
75
251
152H-F251FHD-49
153H-F251FHD-49
—
100
317
152H-F317FHD-50
153H-F317FHD-50
—
125
361
152H-F361FHD-51
153H-F361FHD-51
—
150
480
152H-F480FHD-52
—
200
625
♣
♣
1
2
3
4
5
153H-F480FHD-52
152H-F625JHD-54
♣
152H-F780JHD-56
♣
153H-F625JHD-54
—
250
780
0.37
0.5
5
152H-F5FAD-33
153H-F5FAD-33
0.55
0.75
5
152H-F5FAD-34
153H-F5FAD-34
0.75
1
5
152H-F5FAD-35
153H-F5FAD-35
1.1
1.5
25
152H-F25FAD-36
153H-F25FAD-36
1.5
2
25
152H-F25FAD-37
153H-F25FAD-37
2.2
3
25
152H-F25FAD-38
153H-F25FAD-38
3.7
5
25
152H-F25FAD-39
153H-F25FAD-39
5.5
7.5
25
152H-F25FAD-40
153H-F25FAD-40
0
153H-F780JHD-56
7.5
10
43
152H-F43FAD-41
153H-F43FAD-41
11
15
43
152H-F43FAD-42
153H-F43FAD-42
15
20
60
152H-F60FAD-43
153H-F60FAD-43
18.5
25
85
152H-F85FAD-44
153H-F85FAD-44
22
30
85
152H-F85FAD-45
153H-F85FAD-45
30
40
108
152H-F108FAD-46
153H-F108FAD-46
37
50
135
152H-F135FAD-47
153H-F135FAD-47
45
60
201
152H-F201FAD-48
153H-F201FAD-48
55
75
201
152H-F201FAD-49
153H-F201FAD-49
75
100
251
152H-F251FAD-50
153H-F251FAD-50
90
125
317
152H-F317FAD-51
153H-F317FAD-51
110
150
361
152H-F361FAD-52
153H-F361FAD-52
132
200
480
♣
152H-F480JAD-54
185
250
625
♣
152H-F625JAD-56
♣
153H-F625JAD-56
220
300
780
♣
152H-F780JAD-57
♣
153H-F780JAD-57
6
7
8
9
10
153H-F480FAD-54
1 These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
The nominal current rating for the combination package may differ from the controller, based on the horsepower. Consult your local Rockwell Automation sales
office or Allen-Bradley distributor.
§ Provided with Class J or L fuse clips as standard.
♣ Available in IP54 (Type 12) enclosure only.
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-123
Bulletin 150
SMC™ Flex Smart Motor Controllers
Product Selection
Combination Line-Connected Controllers — IP65 (Type 4/12) Enclosed with Fusible Disconnect or Circuit Breaker, Cont.
0
These controllers include line and load terminations. Enclosures other than those listed are available; consult your local Rockwell Automation
sales office or Allen-Bradley distributor. All Bulletin 153 catalog numbers are supplied with thermal magnetic circuit breakers.
The fusible disconnects do not come with fuses.
Rated
Voltage
[V AC]
1
2
3
400/460
4
5
6
7
8
9
500/575
10
11
12
kW, 50 Hz
0.37
0.55
0.75
1.1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
250
355
450
0.55
0.75
1.1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
22
37
45
55
75
90
110
132
160
200
250
295
315
315
450
560
Hp, 60 Hz
0.5
0.75
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
500
600
0.75
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
450
500
600
800
Controller Current
Rating [A] 5
5
5
5
5
5
25
25
25
25
43
43
43
60
85
85
108
135
201
201
251
317
361
480
480
625
780
5
5
5
5
5
25
25
25
25
43
43
43
43
60
85
85
108
135
201
201
251
317
361
480
480
480
625
780
IP65 (Type 4/12) Enclosed Combination
Controllers with Fusible Disconnect1
Cat. No.§
152H-F5FBD-33
152H-F5FBD-34
152H-F5FBD-35
152H-F5FBD-36
152H-F5FBD-37
152H-F5FBD-38
152H-F25FBD-39
152H-F25FBD-40
152H-F25FBD-41
152H-F25FBD-42
152H-F43FBD-43
152H-F43FBD-44
152H-F43FBD-45
152H-F60FBD-46
152H-F85FBD-47
152H-F85FBD-48
152H-F108FBD-49
152H-F135FBD-50
152H-F201FBD-51
152H-F201FBD-52
152H-F251FBD-54
152H-F317FBD-56
152H-F361FBD-57
152H-F480FBD-58
152H-F480JBD-59
♣
152H-F625JBD-61
♣
152H-F780JBD-62
♣
152H-F5FCD-34
152H-F5FCD-35
152H-F5FCD-36
152H-F5FCD-37
152H-F5FCD-38
152H-F25FCD-39
152H-F25FCD-40
152H-F25FCD-41
152H-F25FCD-42
152H-F43FCD-43
152H-F43FCD-44
152H-F43FCD-45
152H-F43FCD-46
152H-F60FCD-47
152H-F85FCD-48
152H-F85FCD-49
152H-F108FCD-50
152H-F135FCD-51
152H-F201FCD-52
152H-F201FCD-54
152H-F251FCD-56
152H-F317FCD-57
152H-F361FCD-58
152H-F480JCD-59
♣
152H-F480JCD-60
♣
152H-F480JCD-61
♣
152H-F625JCD-62
♣
152H-F780JCD-65
♣
IP65 (Type 4/12) Enclosed Combination
Controllers with Circuit Breaker1
Cat. No.
153H-F5FBD-33
153H-F5FBD-34
153H-F5FBD-35
153H-F5FBD-36
153H-F5FBD-37
153H-F5FBD-38
153H-F25FBD-39
153H-F25FBD-40
153H-F25FBD-41
153H-F25FBD-42
153H-F25FBD-43
153H-F43FBD-44
153H-F43FBD-45
153H-F60FBD-46
153H-F85FBD-47
153H-F85FBD-48
153H-F108FBD-49
153H-F135FBD-50
153H-F201FBD-51
153H-F201FBD-52
153H-F251FBD-54
153H-F317FBD-56
153H-F361FBD-57
153H-F480FBD-58
153H-F480FBD-59
153H-F625JBD-61
♣
153H-F780JBD-62
♣
153H-F5FCD-34
153H-F5FCD-35
153H-F5FCD-36
153H-F5FCD-37
153H-F5FCD-38
153H-F25FCD-39
153H-F25FCD-40
153H-F25FCD-41
153H-F25FCD-42
153H-F43FCD-43
153H-F43FCD-44
153H-F43FCD-45
153H-F43FCD-46
153H-F60FCD-47
153H-F85FCD-48
153H-F85FCD-49
153H-F108FCD-50
153H-F135FCD-51
153H-F201FCD-52
153H-F201FCD-54
153H-F251FCD-56
153H-F317FCD-57
153H-F361FCD-58
153H-F480FCD-59
153H-F480FCD-60
153H-F480FCD-61
153H-F625JCD-62
♣
153H-F780JCD-65
♣
1 These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
13
The nominal current rating for the combination package may differ from the controller, based on the horsepower. Consult your local Rockwell Automation sales
office or Allen-Bradley distributor.
§ Provided with Class J or L fuse clips as standard.
♣ Available in IP54 (Type 12) enclosure only.
www.ab.com/catalogs
4-124
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Modifications
Control Options (open and enclosed)
Option
Description
Cat. No.
Modification
Pump Control
Provides smooth motor acceleration and deceleration, reducing surges caused by the starting and stopping of centrifugal
pumps. Starting time is adjustable from 0…30 s, and stopping time is adjustable from 0…120 s.
B1
Braking Control
Provides Smart Motor Braking (SMB), Accu-Stop, and Slow Speed with Braking.
D1
0
1
Enclosed Options
Option
Push Buttons
Selector Switch
Pilot Lights
Description
Start-Stop Push Button
-1
Start-Stop Push Button with H-O-A Selector Switch
-1F
Soft Stop Push Button
1XA
Pump Stop Push Button
1XB
Slow Speed Push Button
1XC
Brake Push Button
1XD
Accu-Stop/Slow Speed Push Button
1XE
Hand-Off-Auto Selector Switch
Transformer Pilot Light - Green Power On Indicator
-4G
Transformer Pilot Light - Red Run Indicator
-4R
Push-to-Test Pilot Light - Red Run Indicator
-5R
-6PX
1000VA Control Circuit Transformer (fused primary and secondary)
-6PK
1600VA Control Circuit Transformer (fused primary and secondary)
-6PL
2000VA Control Circuit Transformer (fused primary and secondary)
-6PM
-8L
600V Line Side Protective Module
480V Load Side Protective Module
600V Both Line and Load Side Protective Modules
Communication Module
Disconnect Auxiliary
Circuit Breaker Auxiliary
3
4
5
6
-8M
600V Load Side Protective Module
480V Both Line and Load Side Protective Modules
Human Interface Module
-6P
Additional 100VA Control Circuit Transformer (fused primary and secondary)
480V Line Side Protective Module
Protective Modules
2
-3
-3B SMC-Off-Bypass Selector Switch
Control Circuit Transformer (fused primary and secondary)
Control Circuit Transformer
Cat. No.
Modification
Door-mounted, Full Numeric (Type 4/12)
-8B
7
-HC3
RS-485
-20S
DeviceNet
-20D
Ethernet/IP
-20E
Control Net
-20C
ProfiBUS
-20P
N.O. disconnect auxiliary mounted on operating mechanism
N.C. disconnect auxiliary mounted on operating mechanism
8
-98
-99
9
-98X
Internal N.O. circuit breaker auxiliary
Internal N.C. circuit breaker auxiliary
-99X
Service Entrance Label
Service Entrance Label
-SEL
Oil Pump Starter
Bulletin 509 NEMA Size 1starter and Bulletin 592 solid-state overload
-OPS
1 Add the designated letter to the end of the cat. no. Example: To add the Pump Control option: Cat. No. 150-F361NBDB or Cat. No. 152H-F361FBDB-57.
Option push buttons are available only when the corresponding option module is selected. Example: Cat. No. 150-F108FBDB-1XB.
Bypass contactor and overload are not included with this option. A -NB or -BP needs to be added to the catalog string to add these devices.
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-125
Bulletin 150
SMC™ Flex Smart Motor Controllers
Modifications/Accessories
Enclosed Options, Continued
0
Option
Cat. No.
Modification
Description
5…43 A
60…85 A
1
NEMA Bypass Contactor and
Overload Relay
108…135 A
-NB
201…251 A
317…361 A
480 A
5…43 A
2
60…85 A
NEMA Isolation Contactor
108…135 A
-NI
201…251 A
317…361 A
480 A
3
5…43 A
60…85 A
MCS Bypass Contactor and
Overload Relay
4
108…135 A
-BP
201…251 A
317…361 A
480 A
5
6
Accessories
Protective Modules1
Protective modules must not be placed on the load side of a device when using an inside-the-delta connection or with Pump, Braking, or
Linerar Speed control.
Current Rating [A]
5…85
150-F84
480V Protective Module
108…1250
5…85
7
Field Modification
Cat. No.
Description
150-F84L
150-F86
600V Protective Module
108…1250
150-F86L
1 The same protective module mounts on the line or load side of the SMC Flex. For applications requiring both line and load side protection, two protective
modules must be ordered.
8
Terminal Lug Kits (108…1250 A)
9
Current
Rating [A] 108…135♣
201…251♣
10
317…480♣
11
12
Total No. of Line Controller
Terminal Lugs
Possible Each Side
Wire Size
Line Side
Load Side
#6…250 MCM AWG
16 mm2…120 mm2
3
3
6
6
6
6
#4…500 MCM AWG
25 mm2…240 mm2
Cat. No.
199-LF1
199-LG1
3
625…780
2/0…500 MCM AWG
6
6
970
4/0…500 MCM AWG
3
3
2/0…500 MCM AWG
3
3
100-DL630
4/0…500 MCM AWG
3
3
100-DL860
1250§
Line and Load terminals are provided as standard on enclosed SMCs.
5…85 A units have box lugs standard. No additional lugs are required.
§ The 1250 A device requires (1) 100-DL630 and (1) 100-DL860 per connection.
♣ When a multi-conductor lug is required, refer to the User Manual for appropriate lug catalog number.
13
www.ab.com/catalogs
4-126
Pkg. Qty.
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
100-DL630
100-DL860
Bulletin 150
SMC™ Flex Smart Motor Controllers
Accessories
IEC Terminal Covers
Package Quantity
Field Modification
Cat. No.
IEC line or load terminal covers for 108 and 135 A devices.
Dead front protection
1
150-TC1
IEC line or load terminal covers for 201…251 A devices.
Dead front protection
1
150-TC2
IEC line or load terminal covers for 317…480 A devices.
Dead front protection
1
150-TC3
Description‡
0
1
‡ 5…85 A units have terminal guards standard. No additional terminal guards are required.
Human Interface and Communication Modules
Description
Cat. No.
Hand-Held
Human Interface Modules
LCD Display, Full Numeric Keypad1
20-HIM-A3
LCD Display, Programmer Only1
20-HIM-A5
Door-Mounted
Human Interface Modules
Remote (Panel Mount) LCD Display, Full Numeric Keypad
20-HIM-C3S
LCD Display, Programmer Only HIM (includes 3 m cable)
20-HIM-C5S
PowerFlex HIM Interface Cable, 1 m (39 in)
20-HIM-H10
Human Interface Module
Interface Cables
Cable Kit (Male-Female) 0.33 m (1.1 ft)
1202-H03
Cable Kit (Male-Female) 1 m (3.3 ft)
1202-H10
Cable Kit (Male-Female) 3 m (9.8 ft)
1202-H30
Cable Kit (Male-Female) 9 m (29.5 ft)
1202-H90
DPI/SCANport™ One to Two Port Splitter Cable
Description (IP30/Type 1)
3
4
1203-S03
For Use With
RS485 DF1 Communication Adapter
20-COMM-S
PROFIBUS™ DP Communication Adapter
20-COMM-P
ControlNet™ Communication Adapter (Coax)
20-COMM-C
Interbus™ Communication Adapter
Communication Modules
2
Modbus/TCP Communication Adapter
5
20-COMM-I
Bulletin 150 SMC-Flex
20-COMM-M
DeviceNet™ Communication Adapter
20-COMM-D
EtherNet/IP™ Communication Adapter
20-COMM-E
HVAC Communication Adapter
20-COMM-H
ControlNet™ Communication Adapter (Fiber)
20-COMM-Q
DriveTools™
Programming Software
WIN NT/2000/XP
9303-4DTE01ENE
DriveTools™ Sp
Programming Software
WIN NT/2000/XP
9303-4DTS01ENE
AnaCANda™ RS-232 to DPI
PC Interface
Serial
1203-SSS
DPI to USB
PC Interface
USB
1203-USB
6
7
8
1 Requires a 20-HIM-H10 cable to connect to the SMC Flex.
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-127
Bulletin 150
SMC™ Flex Smart Motor Controllers
Specifications
Functional Design Specifications
0
Installation
Setup
1
2
Standard squirrel-cage induction motor or a Wye-Delta, six-lead motor.
Control Wiring
2- and 3-wire control for a wide variety of applications.
Keypad
Front keypad and backlit LCD display.
Software
Parameter values can be downloaded to the SMC-Flex Controller with DriveTools
programming software and the Cat. No. 20-COMM… DPI communication module.
Communications
One DPI provided for connection to optional human interface and communication modules.
Starting and Stopping Modes
Soft Start
Current Limit Start
Dual Ramp
Full Voltage
Linear Speed Acceleration
Preset Slow Speed
Soft Stop
Protection and Diagnostics
Power loss, line fault, voltage unbalance, excessive starts/hour, phase reversal,
undervoltage, overvoltage, controller temp, stall, jam, open gate, overload, underload,
communication fault.
Metering
Amps, volts, kW, kWH, MW, MWH, elapsed time, power factor, motor thermal capacity
usage.
Standard Features
3
4
5
Power Wiring
Alarm Contact
Overload, underload, undervoltage, overvoltage, unbalance, jam, stall, and ground fault
Status Indication
Stopped, starting, stopping, at speed, alarm, and fault.
Auxiliary Contacts
Four fully programmable contacts as normal/up-to-speed/fault/alarm/network (N.O./N.C.),
or external bypass (N.O. only).
Pump Control
Helps reduce fluid surges in centrifugal pumping systems during starting and stopping
period. Starting time is adjustable from 0…30 s. Stopping time is adjustable from 0…120 s.
SMB Smart
Motor Braking
Provides motor braking without additional equipment for applications that require the
motor to stop quickly. Braking current is adjustable from 0…400% of the motor’s full-load
current rating.
Accu-Stop
Provides controlled position stopping. During stopping, braking torque is applied to the
motor until it reaches preset slow speed (7% or 15% of rated speed) and holds the motor
at this speed until a stop command is given. Braking torque is then applied until the motor
reaches zero speed. Braking current is programmable from 0…450% of full-load current.
Slow Speed with
Braking
Used on applications that require slow speed (in the forward direction) for positioning or
alignment and also require braking control to stop.
Optional Features
Braking Control
6
Wiring Diagram — Line Controller
7
3-Phase
Motor
Input Power
8
SMC-Flex Controller
Branch
Protection
9
Fan
10
Stop
Option Input #1
Start
Option Input #2
11
SMC-Flex
Control Terminals
Aux #1
12
PTC
Input
13
TACH Ground Aux #2 Aux #3 Aux #4
Input
Fault
1 Customer supplied.
www.ab.com/catalogs
4-128
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Specifications
Electrical Ratings
Power Circuit
Control Circuit
Device
Rating
480V
Rated Operation Voltage
600V
690V
480V
Rated Insulation Voltage
600V
690V
480V
Rated Impulse Voltage
600V
690V
480V
Dielectric Withstand
600V
690V
480V
Repetitive Peak Inverse
600V
Voltage Rating
690V
Operating Frequency
All
5…480 A
Utilization Category
625…1250 A
5…85 A
Protection Against Electrical
108…480 A
Shock
625…1250 A
480V & 600V
DV/DT Protection
690V
480V & 600V
Transient Protection
690V
5…480 A
Rated Operational Voltage§
625…1250 A
Rated Insulation Voltage
All
Rated Impulse Voltage
All
Dielectric Withstand
All
Operating Frequency
All
Input onstate voltage minimum
Input onstate current
Input offstate voltage maximum
Input offstate current @ input offstate
voltage
UL/CSA/NEMA
200…480V AC (–15%, +10%)
200…600V AC (–15%, +10%)
230…600V AC (–15%, +10%)
IEC
200…415V
200…500V
230…690V/Y (–15%, +10%)
500V
500V
690V
N/A
N/A
6000V
2200V AC
2500V
1400V
1600V
1800V
1400V
1600V
1800V
0
1
2
3
50/60 Hz
MG 1
MG 1
AC-53B:3.0-50:1750
AC-53B:3.0-50:3550
IP20
N/A
IP2X (with terminal covers)
IP00 (open device)
RC Snubber Network
None
Metal Oxide Varistors: 220 Joules
None
100…240V AC or 24V AC/DC
110/120V AC and 230/240V AC
N/A
240V
N/A
3000V
1600V AC
2000V
50/60 Hz
85V AC, 19.2V DC / 20.4V AC
20 mA @120V AC / 40 mA @ 240V AC, 7.6 mA @ 24V AC/DC
50V AC, 10V DC / 12V AC
4
5
6
7
<10 mA AC, <3 mA DC
§ 690V power is only available with 100…240V control.
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-129
Bulletin 150
SMC™ Flex Smart Motor Controllers
Specifications
Electrical Ratings
SCPD Performance 200…600V
0
SCCR List1
1
Line Device Operational
Current Rating [A]
2
3
4
5
Short-Circuit
Protection
Delta Device Operational
Current Rating [A]
6
SCPD Performance 690V
7
SCCR List1
8
9
12
108
70 kA
A070URD33xxx500
135
70 kA
A070URD33xxx500
201
70 kA
A070URD33xxx700
251
70 kA
A070URD33xxx700
317
70 kA
A070URD33xxx900
361
70 kA
A070URD33xxx900
480
70 kA
625
780
70 kA
70 kA
970
85 kA
1250
85 kA
Maximum FLC
10
11
Type 1§♣
Max. Standard Max. Standard Max. Standard
Max. Circuit
Fuse [A]
Available Fault
Available Fault
Breaker [A]
5
5 kA
20
5 kA
20
25
5 kA
100
5 kA
100
43
10 kA
150
10 kA
150
60
10 kA
225
10 kA
225
85
10 kA
300
10 kA
300
108
10 kA
400
10 kA
300
135
10 kA
500
10 kA
400
201
18 kA
600
18 kA
600
251
18 kA
700
18 kA
700
317
30 kA
800
30 kA
800
361
30 kA
1000
30 kA
1000
480
42 kA
1200
42 kA
1200
625
42 kA
1600
42 kA
1600
780
42 kA
1600
42 kA
2000
970
85 kA
2500
85 kA
2500
1250
85 kA
3000
85 kA
3200
8.7
5 kA
35
5 kA
35
43
5 kA
150
5 kA
150
74
10 kA
300
10 kA
300
104
10 kA
400
10 kA
400
147
10 kA
400
10 kA
400
187
10 kA
600
10 kA
500
234
10 kA
700
10 kA
700
348
18 kA
1000
18 kA
1000
435
18 kA
1200
18 kA
1200
549
30 kA
1600
30 kA
1600
625
30 kA
1600
30 kA
1600
831
42 kA
1600
30 kA
1600
850
42 kA
1600
42 kA
2000
900
42 kA
1600
42 kA
2000
1200
85 kA
3000
85 kA
3200
1600
85 kA
3000
85 kA
3200
Type 1§
Device
Max. Ampere Tested — North
Max. Standard Available Fault
Rating
American Style
A070D33xxx1250
A100URD73xxx1250
A070URD33xxx1400
A070URD33xxx1400
Two fuses in parallel
A070URD33xxx1250
Two fuses in parallel
A070URD33xxx1250
Max. High
Fault
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
69 kA
69 kA
69 kA
74 kA
74 kA
85 kA
85 kA
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
70 kA
69 kA
69 kA
69 kA
74 kA
74 kA
85 kA
85 kA
Max. Fuse [A]
‡
10
50
90
125
175
200
225
350
400
500
600
800
1600
1600
2500
3000
17.5
90
150
200
200
300
400
600
800
1000
1200
1600
1600
1600
3000
3000
Max. Ampere Tested —
European Style
6,9 gRB 73xxx400
6,6URD33xxx500
6,9 gRB 73xxx400
6,6URD33xxx500
6,9 gRB 73xxx630
6,6URD33xxx700
6,9 gRB 73xxx630
6,6URD33xxx700
6,9 gRB 73xxx800
6,6URD33xxx900
6,9 gRB 73xxx800
6,6URD33xxx900
9 URD 73xxx1250
6,6URD33xxx1250
6,6URD33xxx1400
6,6URD33xxx1400
Two fuses in parallel
6,6URD33xxx1250
Two fuses in parallel
6,6URD33xxx1250
1 Consult local codes for proper sizing of short circuit protection.
Non-time delay fuses (K5 — 5…480V (8.7…831 A) devices; Class L — 625…1250V (850…1600 A) devices).
‡ High capacity fault rating when used with time delay class CC, J, or L fuses.
§ Type 1 performance/protection indicates that, under a short-circuit condition, the fused or circuit breaker-protected starter shall cause no danger to persons or
installation but may not be suitable for further service without repair or replacement.
♣ For short-circuit current rating (SCCR) for enclosed panel with external bypass or isolation contactor, see the Industrial Controls catalog website:
www.ab.com/catalogs.
13
www.ab.com/catalogs
4-130
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Specifications
Electrical Ratings
120…240V AC
24V AC
1…480 A
Control Module
Power
Requirements
625…1250 A
Heatsink Fan(s)♣
Steady State Heat
Dissipation with Control
and Fan Power (Watts)
Auxiliary Contacts
19/20 (Aux #1)
29/30 (Aux #2)
31/32 (Aux #3)
33/34 (Aux #4)
PTC Input Ratings
5
25
43
60
85
108
135
201
251
317
361
480
625
780
970
1250
Controller Rating [A]
Type of Control Circuit
Number of Contacts
Type of Contacts
Type of Current
Rated Operational Current
Conventional Thermal CurrentIth AC/DC
Make/Break VA
Utilization Category
Response Resistance
Reset Resistance
Short-Circuit Trip Resistance
Max. Voltage at PTC Terminals (RPTC = 4 kΩ)
Max. Voltage at PTC Terminals (RPTC = open)
Transformer
75 VA
Transformer
130 VA
Inrush Current
5A
Inrush Time
250 ms
Transient Watts
60 W
24V DC
Transient Time
500 ms
Steady State Watts
24 W
Minimum Allen-Bradley
1606-XLP50E
Power Supply
751 VA (recommended 800 VA)
5…135 A, 20 VA
201…251 A, 40 VA
317…480 A, 60 VA
625…1250 A, 150 VA
70
70
81
97
129
91
104
180
198
225
245
290
446
590
812
1222
Electromagnetic relay
1
programmable N.O./N.C.
AC
3 A @ 120V AC, 1.5 A @ 240V AC
5A
3600/360
AC-15/DC
3400 Ω ±150 Ω
1600 Ω ±100 Ω
25 Ω ±10 Ω
< 7.5V
30V
6
1500 Ω
800 ms
0…5V DC, 4.5V DC = 100% Speed
Max. No. of Sensors.
Max. Cold Resistance of PTC Sensor Chain
Response Time
Tach Input
0
1
2
3
4
5
6
7
8
9
♣ Heatsink fans can be powered by either 110/120V AC or 220/240V AC.
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-131
Bulletin 150
SMC™ Flex Smart Motor Controllers
Specifications
Environmental
0
1
-5…+50 °C (23…+122 °F) (open)
-5…+40 °C (23…+104 °F) (enclosed)
-20…+75 °C (-4…167 °F)
2000 m (6560 ft)
5…95% (non-condensing)
2
Operating Temperature Range
Storage and Transportation Temperature Range
Altitude
Humidity
Pollution Degree
Mechanical
Operational
Resistance to Vibration
2
Non-Operational
Operational
Resistance to Shock
3
4
Non-Operational
Construction
All
1.0 G Peak, 0.15 mm (0.006 in.) displacement
5…480 A
2.5 G Peak, 0.38 mm (0.015 in.) displacement
625…1250 A
1.0 G Peak, 0.15 mm (0.006 in.) displacement
5…85 A
15 G
108…480 A
5.5 G
625…1250 A
4G
5…85 A
30 G
108…480 A
25 G
625…1250 A
12 G
Power Poles
5…85 A
Heatsink thyristor modular design
Power Poles
108…1250 A
Heatsink hockey puck thyristor modular design
Control Modules
Thermoset and Thermoplastic Moldings
Metal Parts
Plated Brass, Copper, or Painted Steel
5…85 A
5
Power Terminals
Terminals
6
Cable size — Line Upper — 2.5…95 mm2 (14…3/0 AWG)
Line Lower — 0.8…2.5 mm2 (18…14 AWG)
Load Upper — 2.5…50 mm2 (14…1 AWG)
Load Lower — 0.8…2.5 mm2 (18…14 AWG)
Tightening torque — 14.7 N•m (130 lb.-in.)
Wire strip length — 18…20 mm (0.22…0.34 in.)
108…135 A
One M10 x 1.5 diameter hole per power pole
201…251 A
Two M10 x 1.5 diameter holes per power pole
317…480 A
Two M12 x 1.75 diameter holes per power pole
625…1250 A
Two 13.5 mm (0.53 in.) diameter holes per power pole
Power Terminal Markings
NEMA, CENELEC EN50 012
Control Terminals
7
M3 screw clamp
Clamping yoke connection
Other
EMC Emission Levels
Conducted Radio Frequency Emissions
Radiated Emissions
Class A
Class A
EMC Immunity Levels
Electrostatic Discharge
Radio Frequency Electromagnetic Field
Fast Transient
Surge Transient
8 kV Air Discharge
Per EN/IEC 60947-4-2
Per EN/IEC 60947-4-2
Per EN/IEC 60947-4-2
8
5
9
10
Current Range [A]
Overload Characteristics
11
12
5...25
8.6…43
43
8.6...43
14.8…75
60
12...60
20.8…104
85
17...85
29.4…147
108
27…108
47…187
135
34…135
59…234
201
67…201
116…348
251
84…251
145…435
317
106…317
183…549
361
120…361
208…625
480
160…480
277…831
625
208…625
283…850
780
260…780
300…900
970
323…970
400…1200
1250
416…1250
533…1600
10, 15, 20, and 30
117% of Motor FLC
3
CE Marked Per Low Voltage Directive 73/23/EEC, 93/68/EEC
UL Listed (File No. E96956)
Open-Type Controllers
13
www.ab.com/catalogs
4-132
Delta
1.7…9
25
Trip Classes
Trip Current Rating
Number of Poles
Certifications
Line
1...5
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Approximate Dimensions
Dimensions are in millimeters (inches). Dimensions are not intended for manufacturing purposes.
Approximate Dimensions and Shipping Weights
0
Open Type Controllers
Rating [A]
Height
Width
Depth
Weight
5…85
321
(12.6)
150
(5.9)
203
(8.0)
5.7 kg
(12.6 lbs)
108…135
443.7
(17.47)
196.4
(7.74)
205.2
(8.08)
15.0 kg
(33 lbs).
201…251
560
(22.05)
225
(8.86)
253.8
(9.99)
30.4 kg
(67 lbs).
317…480
600
(23.62)
290
(11.42)
276.5
(10.89)
45.8 kg
(101 lbs)
625…780
1041.1
(41.0)
596.9
(23.5)
346.2
(13.63)
179 kg
(395 lbs)
970…1250
1041.1
(41.0)
596.9
(23.5)
346.2
(13.63)
224 kg
(495 lbs)
1
2
3
Enclosed-Type Line-Connected Controllers
Factory-installed options may affect enclosure size requirements.
Exact dimensions can be obtained after order entry. Please consult your local Rockwell Automation sales office or Allen-Bradley distributor.
A
C
A
D
D
E
4
C
5
B
E
B
6
F
7
F
Figure 1 — Wall-Mount
Figure 2 — Wall-Mount
8
LIFTING ANGLE
C
C
9
10
B
B
11
A
Figure 3 — Floor-Mount
12
A
Figure 4 — Floor-Mount
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-133
Bulletin 150
SMC™ Flex Smart Motor Controllers
Approximate Dimensions
0
Controller
Rating [A]
Bulletin
With Option
Dimension
Figure No.
152H,153H,152B,153B
—
BP,NB,NI,6_
1
—
43
152H,153H,152B,153B
2
85
E (Mtg. Dim.)
F (Mtg. Dim.)
1
135
22.5 (572)
14.5 (368)
22.5 (572)
28.5 (724)
1
—
NI, NB
153B, 153H
—
16 (406)
24 (610)
10 (254)
22.5 (572)
14.5 (368)
152B,152H
—
24 (610)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
24 (610)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
24 (610)
30 (762)
12 (305)
30 (762)
38 (965)
14 (356)
152H, 153H,153B
152H,153H
152H,153H
152H,153H
152H,153H
6_
BP
153B
1
BP , 6_
24 (610)
30 (762)
12 (305)
30 (762)
38 (965)
14 (356)
0.75 (19)
152H,152B
152H,152B, 153B,153H
0.75 (19)
28.5 (724)
22.5 (572)
36.5 (927)
28.5 (724)
28.5 (724)
22.5 (572)
36.5 (927)
28.5 (724)
BP,NB,NI
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
—
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
36.5 (927)
28.5 (724)
30 (762)
38 (965)
14 (356)
BP, NB,NI
6_
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
—
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
36.5 (927)
28.5 (724)
6_
1
30 (762)
38 (965)
14 (356)
BP, NB,NI
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
—
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
6_
1
0.75 (19)
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
BP, NB,NI
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
—
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
BP, NB,NI
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
—
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
6_
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
36 (914)
60 (1524)
14 (356)
58.5 (1486)
34.5 (876)
—
36 (914)
60 (1524)
14 (356)
58.5 (1486)
34.5 (876)
—
38 (965)
60 (1524)
17 (431)
1.75 (45)
61.69 (1567)
38 (965)
60 (1524)
17 (431)
1.75 (45)
61.69 (1567)
40 (1016)
84 (2134)
18 (457)
36 (914)
51 (1295)
14 (356)
36 (914)
51 (1295)
14 (356)
36 (914)
60 (1524)
14 (356)
6_
6_
NB,NI
1
0.75 (19)
1
1
2
3
6_
1
0.75 (19)
0.75 (19)
0.75 (19)
33.88 (861)
—
0.75 (19)
—
—
49.5 (1257)
34.5 (876)
49.5 (1257)
34.5 (876)
58.5 (1486)
34.5 (876)
153B
—
36 (914)
60 (1524)
14 (356)
58.5 (1486)
34.5 (876)
152H, 152B
—
38 (965)
60 (1524)
17 (431)
1.75 (45)
61.69 (1567)
1.75 (45)
61.69 (1567)
152H
6_
153H,152B,153B,152H
NB,NI
153H,153B
—
6_
BP,NI
—
BP
2
3
1
1
21‡
38 (965)
60 (1524)
17 (431)
40 (1016)
84 (2134)
18 (457)
36 (914)
51 (1295)
14 (356)
33.88 (861)
—
—
—
49.5 (1257)
34.5 (876)
49.5 (1257)
34.5 (876)
36 (914)
51 (1295)
14 (356)
36 (914)
60 (1524)
14 (356)
58.5 (1486)
34.5 (876)
38 (965)
60 (1524)
17 (431)
1.75 (45)
61.69 (1567)
38 (965)
60 (1524)
17 (431)
0.75 (19)
33.88 (861)
1.75 (45)
61.69 (1567)
NB
31‡
40 (1016)
84 (2134)
18 (457)
—
—
—
—
41§
20 (508)
91.5 (2324)
20 (508)
—
—
—
153H.153B
BP,NB,NI
31§
40 (1016)
84 (2134)
18 (457)
152B
BP,NB,NI,6_
31
40 (1016)
84 (2134)
18 (457)
—
—
—
152H,152B
BP,NB,NI
4
35 (889)
91.5 (2324)
20 (508)
20 (508)
—
—
—
—
—
—
152H
10
780
28.5 (724)
36.5 (927)
14.5 (368)
153H
12
0.75 (19)
22.5 (572)
BP
625
12 (305)
14 (356)
22.5 (572)
153H
11
30 (762)
38 (965)
14.5 (368)
28.5 (724)
—
480
24 (610)
30 (762)
22.5 (572)
22.5 (572)
10 (254)
152B,153B,152H
9
10 (254)
12 (305)
152H,152B
361
24 (610)
28.5 (724)
24 (610)
BP,NB
7
16 (406)
0.75 (19)
30 (762)
153H
317
12 (305)
16 (406)
152B,153B,153H,152H
6
10 (254)
30 (762)
24 (610)
152B,153B,153H,152H
251
24 (610)
24 (610)
—
152H,152B,153H,153B
201
16 (406)
6_
153H,153B,152H,152B
13
D (Mtg. Dim.)
153H, 153B
152B, 152H,153B
108
8
C (Depth)
152H, 153H,153B
153H
3
5
BP, 6_
NI, NB
60
4
B (Height)
SMC-Flex Combination Controller
5…25
1
Dimensions in inches (mm)
A (Width)
152B
—
55 (1397)
91.5 (2324)
152B,152H,153B,153H
NB
105 (2664)
91.5 (2324)
20 (508)
55 (1397)
91.5 (2324)
20 (508)
BP
70 (1778)
91.5 (2324)
20 (508)
153B,153H
—
65 (1651)
91.5 (2324)
20 (508)
152B
—
55 (1397)
91.5 (2324)
20 (508)
152B,152H
BP,NI
70 (1778)
91.5 (2324)
20 (508)
152B,152H,153B,153H
NB
105 (2664)
91.5 (2324)
20 (508)
153B,153H
—
65 (1651)
91.5 (2324)
20 (508)
152H
—
4
4
1 Assumed line voltage to be 480V AC. Different voltage may necessitate a bigger enclosure size. Consult your local Rockwell Automation sales office or Allen-Bradley
distributor.
350 Hp max.
‡ 150 Hp @ 208V AC, 350 Hp @480V, 400…4500 Hp @ 600V
§ 200 Hp @ 240V AC, 400 Hp @480V, 5000 Hp @ 600V
www.ab.com/catalogs
4-134
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™ Flex Smart Motor Controllers
Approximate Dimensions
Controller
Rating [A]
Bulletin
With Option
Dimension
Figure No.
Dimensions in inches (mm)
A (Width)
B (Height)
C (Depth)
D (Mtg. Dim.) E (Mtg. Dim.) F (Mtg. Dim.)
22.5 (572)
14.5 (368)
22.5 (572)
14.5 (368)
Non-Combination Controller
—
1
16 (406)
24 (610)
10 (254)
6_
11
16 (406)
24 (610)
10 (254)
BP
1
24 (610)
30 (762)
12 (305)
150, 150B
NB,NI
1
24 (610)
30 (762)
150
NB,6P_
1
30 (762)
38 (965)
16 (406)
1
24 (610)
24 (610)
24 (610)
150
5…43
150
150B
60
150
—
—
BP
6_
150, 150B
150
150
135
201
251
317
361
480
36.5 (927)
28.5 (724)
24 (610)
10 (254)
22.5 (572)
14.5 (368)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
0.75 (19)
12 (305)
28.5 (724)
22.5 (572)
14 (356)
36.5 (927)
28.5 (724)
—
16 (406)
24 (610)
10 (254)
22.5 (572)
14.5 (368)
—
24 (610)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
24 (610)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
24 (610)
30 (762)
12 (305)
BP
1
NB
0.75 (19)
28.5 (724)
22.5 (572)
6_
1
24 (610)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
NB,NI,6P_
1
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
24 (610)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
—
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
NB,NI
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
—
24 (610)
30 (762)
12 (305)
28.5 (724)
22.5 (572)
BP
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
BP
NB
150B
14 (356)
30 (762)
1
—
108
22.5 (572)
38 (965)
150
150
28.5 (724)
24 (610)
NI
85
22.5 (572)
305(12)
30 (762)
NB
150, 150B
150B
1
28.5 (724)
0.75 (19)
1
0.75 (19)
150B
—
150
NB
30 (762)
38 (965)
14 (356)
36.5 (927)
28.5 (724)
150B
NB,NI
36 (914)
51 (1295)
14 (356)
49.5 (1257)
34.5 (876)
150
—
150,150B
NB,NI,BP,6_
150
—
150,150B
NB,NI,BP,6_
30 (762)
38 (965)
14 (356)
36 (914)
51 (1295)
14 (356)
30 (762)
38 (965)
14 (356)
36 (914)
51 (1295)
14 (356)
36 (914)
51 (1295)
14 (356)
36 (914)
60 (1524)
14 (356)
36 (914)
51 (1295)
14 (356)
36 (914)
60 (1524)
14 (356)
36 (914)
51 (1295)
14 (356)
36 (914)
60 (1524)
14 (356)
35 (889)
91.5 (2324)
20 (508)
60 (1524)
91.5 (2324)
20 (508)
60 (1524)
91.5 (2324)
20 (508)
NB
90 (2286)
91.5 (2324)
20 (508)
—
35 (889)
91.5 (2324)
20 (508)
BP,NB
60 (1524)
91.5 (2324)
20 (508)
60 (1524)
91.5 (2324)
20 (508)
90 (2286)
91.5 (2324)
20 (508)
150
NB,NI,BP,6_
150B
NB,NI,BP,6_
150
NB,NI,BP,6_
150B
NB,NI,BP,6_
150
—
150, 150B
BP,NB,NI
150
625
150B
150
780
150B
1
1
1
1
1
1
—
BP,NB
—
—
4
4
NB
0.75 (19)
36.5 (927)
28.5 (724)
49.5 (1257)
34.5 (876)
36.5 (927)
28.5 (724)
49.5 (1257)
34.5 (876)
49.5 (1257)
34.5 (876)
58.5 (1486)
34.5 (876)
49.5 (1257)
34.5 (876)
58.5 (1486)
34.5 (876)
49.5 (1257)
34.5 (876)
58.5 (1486)
34.5 (876)
—
—
—
—
—
—
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0
1
2
3
4
5
6
7
8
9
10
1 Extra capacity transformer may require a larger enclosure; consult your local Rockwell Automation sales office or Allen-Bradley distributor.
1 kVA control transformers or larger extra capacity transformers may require a larger enclosure; consult your local Rockwell Automation sales office or
Allen-Bradley distributor.
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-135
Bulletin 150
SMC™-3 Smart Motor Controllers
Product Overview/Modes of Operation/Features
Bulletin 150 — Smart Motor Controllers — SMC™-3 Smart
Motor Controller
0
The SMC-3 is a compact, simple to use, solid-state motor controller
designed to operate 3-phase motors. It features a built-in overload
relay and a built-in SCR bypass contactor on all three phases, allowing
a smaller footprint than other soft starters on the market. This product
is designed for many applications, including compressors, chillers,
pumps, conveyors, and crushers. Modes of operation for the controller
are as follows:
1
Soft Start
Current Limit Start
2
Cat. No. Explanation 4-137
Product Selection ...... 4-138
Typical Wiring Diags. 4-150
Specifications.............. 4-152
Approx. Dimensions . 4-156
Enclosed Options ...... 4-148
Accessories.................. 4-148
The controllers offer two voltage ranges: 200…480V AC and
200…600V AC. All voltage ranges will operate at either 50 or 60 Hz.
1…480 A Range
Built-In Electronic Motor Overload Protection
Built-In SCR/Run Bypass
Delta Compatibility
3
4
Soft Stop
Kick Start
Table of Contents
This catalog is based on the minimum information needed to select an SMC soft starter for applications with low starting torque
requirements. For product selection involving loads with high starting torque requirements (large fan, rock crusher, chipper, etc.), use of the
free tools available from the Rockwell Automation Website is recommended:
http://www.ab.com/industrialcontrols/products/solid-state_motor_control/software/
Standards Compliance
Certifications
5
UL 508
CSA C22.2 No.14
EN/IEC 60947-1
EN/IEC 60947-4-2
cULus Listed (Open Type) (File No. E96956, Guides NMFT, NMFT7)
CSA Certified (File No. LR 1234)
CE Marked (Open Type) per EMC and Low Voltage Directive
CCC Certified
6
Modes of Operation
7
Soft Start
Current Limit Start
Selectable Kickstart
Soft Stop
Note: For detailed information about the different modes of
operation, see page 4-109
Description of Features
Electronic Motor Overload Protection
8
9
10
11
12
Phase Imbalance
The SMC-3 controller incorporates, as standard, electronic motor
overload protection. This motor overload protection is accomplished
electronically with the use of current transformers on each of the
three phases. The controller’s overload protection is programmable,
providing the user with flexibility. The overload trip class selection
consists of either OFF, 10, 15, or 20. The trip current is easily
selected by adjusting the rotary potentiometer to the motor full-load
current rating. Trip reset is selectable to either automatic or manual
mode.
Note: Trip rating is 120% of dial setting.
The unit monitors for imbalance between phase currents. To prevent
motor damage, the unit will trip if the difference between the
minimum phase current and the maximum phase current exceeds
65% for 3 s, and a fault will be indicated.
Over-temperature
Push to Test
The SMC-3 monitors the SCR temperature by means of internal
thermistors. When the power poles maximum rated temperature is
reached, the microcomputer switches off the SMC, a TEMP fault is
indicated via LED, and the 97/98 fault contact closes.
The unit with control wiring can be tested for fault conditions by
using the Push to Test function. Hold down the Reset button for 7 s
to activate the fault Aux (97, 98) and shut down the SMC-3. To clear,
either push the Reset button or cycle control power to the device.
Phase Reversal Protection
LED Description (Number of Flashes)
When enabled via a DIP switch, 3-phase input power will be verified
before starting. If input power phasing is detected to be incorrect,
the start will be aborted and a fault indicated.
1.
2.
3.
4.
5.
6.
7.
Phase Loss/Open Load
The unit will not attempt a start if there is a single-phase condition
on the line. This protects from motor burnout during single-phase
starting.
Shorted SCR
Prior to every start and during starting, the unit will check all SCRs
for shorts and unit load connections to the motor. If there is a
shorted SCR in the SMC-3 and/or open load, the start will be
aborted and a shorted SCR or open load fault will be indicated. This
prevents damage from phase imbalance.
Overload
Overtemperature
Phase Reversal
Phase Loss/Open Load
Phase Imbalance
Shorted SCR
Test
13
www.ab.com/catalogs
4-136
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Catalog Number Explanation
Open and Non-Combination
150 – C
a
30
F
B
c
d
e
b
D – 8L
f
0
g
a
c
d
f
Bulletin Number
Ampere Ratings
Enclosure Type
Control Voltage
1
Code
Description
Code
Description
Code
Description
Code
Description
150
Solid-State Controller
3
3A
N
Open
D
100…240V AC
F
NEMA 4/12 (IP65)
R
24V AC/DC (Open Type
only)
b
Controller Type
Code
Description
C
SMC-3
9
9A
16
16 A
19
19 A
25
25 A
30
30 A
37
37 A
43
43 A
60
60 A
85
85 A
108
108 A
135
135 A
201
201 A
251
251 A
317
317 A
361
361 A
480
480 A
e
Input Line Voltage
Open Type
Options (see page 4-148 for a full
listing)
Code
Description
200…460V AC, 3-Phase,
50/60 Hz
Code
Description
B
200…600V AC, 3-Phase,
50/60 Hz
8L
C
Line Mounted Protective
Module (Enclosed Type
only)
Load-side MOVs are not available
when used with inside-the-delta
connections. MOVs can be field
installed for open type units.
Non-Combination Enclosed Only
H
200…208V AC, 3-Phase,
50/60 Hz
A
230V AC, 3-Phase,
50/60 Hz
B
400…460V AC, 3-Phase,
50/60 Hz
C
500…575V AC, 3-Phase,
50/60 Hz
3
4
5
6
Combination
152H – C
a
30
F
BD
c
d
e
b
a
Bulletin Number
f
g
7
e
g
Ampere Ratings
Input Line Voltage
Open Type
Options (see page 4-148 for a full
listing)
Description
Code
Description
152H
Solid-State Controller with
Fusible Disconnect
3
3A
9
9A
16
16 A
19
19 A
b
25
25 A
Controller Type
30
30 A
Solid-State Controller with
Circuit Breaker
43 – 8L
c
Code
153H
2
g
Code
Description
37
37 A
C
SMC-3
43
43 A
60
60 A
Code
Description
HD
200…208V AC, 3-Phase,
50/60 Hz
AD
230V AC, 3-Phase,
50/60 Hz
BD
400…460V AC, 3-Phase,
50/60 Hz
CD
500…575V AC, 3-Phase,
50/60 Hz
85
85 A
108
108 A
135
135 A
201
201 A
251
251 A
Cat.
No.
317
317 A
361
480
Description
8L
Line Mounted Protective
Module (Enclosed Type
only)
Load-side MOVs are not available
when used with inside-the-delta
connections.
8
9
10
f
Horsepower
Hp
Rating
Cat.
No.
33
0.5
361 A
34
0.75
480 A
35
36
37
d
Enclosure Type
Code
Description
F
NEMA Type 4/12 (IP65)
J
NEMA Type 12 (IP54)
X
NEMA Type 3R (IP44)
www.ab.com/catalogs
Code
Hp
Rating
Cat.
No.
Hp
Rating
Cat.
No.
Hp
Rating
Cat.
No.
Hp
Rating
39
5
46
40
52
150
60
450
40
7.5
47
50
54
200
61
500
1
41
10
48
60
56
250
62
600
1.5
42
15
49
75
57
300
63
700
2
43
20
50
100
58
350
65
800
38
3
44
25
51
125
59
400
67
1000
—
—
45
30
—
—
—
—
—
—
12
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
11
4-137
Bulletin 150
SMC™-3 Smart Motor Controllers
Product Selection
Open Type and Non-Combination Enclosed (IP65, NEMA 4/12) Controllers ⎯ For use with Line-Connected Motors
0
Rated Voltage
[V AC]
Motor Current
[A]
1…3
1
3…9
5.3…16
2
6.3…19
9.2…25
3
10…30
12.3…37
14.3…43
4
200/208
20…60
28.3…85
5
27…108
34…135
6
67…201
84…251
7
106…317
120…361
8
9
160…480
Max. kW, 50
Hz
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Open Type — Line-Connected
Motors
Max. Hp, 60
Hz
0.5
0.75…2
1.5…3
1.5…3
3…7.5
3…7.5
5…10
5…10
7.5…15
10…25
20…30
25…40
40…60
50…75
60…100
75…125
100…150
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-C3NBD
150-C3FHD
24V AC/DC
150-C3NBR
—
100…240V AC, 50/60 Hz
150-C9NBD
150-C9FHD
24V AC/DC
150-C9NBR
—
100…240V AC, 50/60 Hz
150-C16NBD
150-C16FHD
24V AC/DC
150-C16NBR
—
100…240V AC, 50/60 Hz
150-C19NBD
150-C25FHD
24V AC/DC
150-C19NBR
—
100…240V AC, 50/60 Hz
150-C25NBD
150-C25FHD
24V AC/DC
150-C25NBR
—
100…240V AC, 50/60 Hz
150-C30NBD
150-C30FHD
24V AC/DC
150-C30NBR
—
100…240V AC, 50/60 Hz
150-C37NBD
150-C37FHD
24V AC/DC
150-C37NBR
—
100…240V AC, 50/60 Hz
150-C43NBD
150-C43FHD
24V AC/DC
150-C43NBR
—
100…240V AC, 50/60 Hz
150-C60NBD
150-C60FHD
24V AC/DC
150-C60NBR
—
100…240V AC, 50/60 Hz
150-C85NBD
150-C85FHD
24V AC/DC
150-C85NBR
—
100…240V AC, 50/60 Hz
150-C108NBD
150-C108FHD
24V AC/DC♣
150-C108NBR
—
100…240V AC, 50/60 Hz
150-C135NBD
150-C135FHD
24V AC/DC♣
150-C135NBR
—
100…240V AC, 50/60 Hz
150-C201NBD
150-C201FHD
24V AC/DC♣
150-C201NBR
—
100…240V AC, 50/60 Hz
150-C251NBD
150-C251FHD
24V AC/DC♣
150-C251NBR
—
100…240V AC, 50/60 Hz
150-C317NBD
150-C317FHD
24V AC/DC♣
150-C317NBR
—
100…240V AC, 50/60 Hz
150-C361NBD
150-C361FHD
24V AC/DC♣
150-C361NBR
—
100…240V AC, 50/60 Hz
150-C480NBD
150-C480FHD
24V AC/DC♣
150-C480NBR
—
Motor FLA rating should fall within specified current range for unit to operate properly.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
♣ Separate 120V or 240V single phase is required for fan operation.
10
11
12
13
www.ab.com/catalogs
4-138
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Product Selection
Open Type and Non-Combination Enclosed (IP65, NEMA 4/12) Controllers ⎯ For use with Line-Connected Motors,
Continued
Rated Voltage
[V AC]
Motor Current
[A]
1…3
3…9
5.3…16
6.3…19
9.2…25
230
Max. kW, 50
Hz
0.55
2.2
4
4
5.5
Max. Hp, 60
Hz
0.5
0.75…2
1.5…5
2…5
3…7.5
10…30
7.5
5…10
12.3…37
7.5
5…10
14.3…43
11
5…15
20…60
15
7.5…20
28.3…85
27…108
34…135
67…201
84…251
106…317
120…361
160…480
22
30
37
55
75
90
110
132
Open Type — Line-Connected
Motors
15…30
20…40
25…50
40…75
50…100
60…125
75…150
100…200
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-C3NBD
150-C3FAD
24V AC/DC
150-C3NBR
—
100…240V AC, 50/60 Hz
150-C9NBD
150-C9FAD
24V AC/DC
150-C9NBR
—
100…240V AC, 50/60 Hz
150-C16NBD
150-C16FAD
24V AC/DC
150-C16NBR
—
100…240V AC, 50/60 Hz
150-C19NBD
150-C25FAD
24V AC/DC
150-C19NBR
—
100…240V AC, 50/60 Hz
150-C25NBD
150-C25FAD
24V AC/DC
150-C25NBR
—
100…240V AC, 50/60 Hz
150-C30NBD
150-C30FAD
24V AC/DC
150-C30NBR
—
100…240V AC, 50/60 Hz
150-C37NBD
150-C37FAD
24V AC/DC
150-C37NBR
—
100…240V AC, 50/60 Hz
150-C43NBD
150-C43FAD
24V AC/DC
150-C43NBR
—
100…240V AC, 50/60 Hz
150-C60NBD
150-C60FAD
24V AC/DC
150-C60NBR
—
100…240V AC, 50/60 Hz
150-C85NBD
150-C85FAD
0
1
2
3
4
5
24V AC/DC
150-C85NBR
—
100…240V AC, 50/60 Hz
150-C108NBD
150-C108FAD
24V AC/DC♣
150-C108NBR
—
100…240V AC, 50/60 Hz
150-C135NBD
150-C135FAD
24V AC/DC♣
150-C135NBR
—
100…240V AC, 50/60 Hz
150-C201NBD
150-C201FAD
24V AC/DC♣
150-C201NBR
—
100…240V AC, 50/60 Hz
150-C251NBD
150-C251FAD
24V AC/DC♣
150-C251NBR
—
100…240V AC, 50/60 Hz
150-C317NBD
150-C317FAD
24V AC/DC♣
150-C317NBR
—
100…240V AC, 50/60 Hz
150-C361NBD
150-C361FAD
24V AC/DC♣
150-C361NBR
—
100…240V AC, 50/60 Hz
150-C480NBD
150-C480FAD
24V AC/DC♣
150-C480NBR
—
Motor FLA rating should fall within specified current range for unit to operate properly.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
♣ Separate 120V or 240V single phase is required for fan operation.
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-139
Bulletin 150
SMC™-3 Smart Motor Controllers
Product Selection
0
Open Type and Non-Combination Enclosed (IP65, NEMA 4/12) Controllers ⎯ For use with Line-Connected Motors,
Continued
Rated Voltage
[V AC]
Motor Current
[A]
1…3
1
3…9
5.3…16
2
6.3…19
9.2…25
3
10…30
12.3…37
4
14.3…43
380/400/
415/460
5
20…60
28.3…85
27…108
6
34…135
67…201
84…251
7
106…317
120…361
Max. kW, 50
Hz
1.1
0.5…1.5
4
1.5…5
7.5
5…10
7.5
5…10
11
7.5…15
15
7.5…20
18.5
10…25
22
10…30
30
15…40
45
25…60
55
50…75
75
60…100
95…110
95…132
95…160
110…200
75…150
100…200
125…250
250…300
8
160…480
9
160…250
Open Type — Line-Connected
Motors
Max. Hp, 60
Hz
300…400
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-C3NBD
150-C3FBD
24V AC/DC
150-C3NBR
—
100…240V AC, 50/60 Hz
150-C9NBD
150-C9FBD
24V AC/DC
150-C9NBR
—
100…240V AC, 50/60 Hz
150-C16NBD
150-C16FBD
24V AC/DC
150-C16NBR
—
100…240V AC, 50/60 Hz
150-C19NBD
150-C19NBR
24V AC/DC
150-C19NBR
—
100…240V AC, 50/60 Hz
150-C25NBD
150-C25NBR
24V AC/DC
150-C25NBR
—
100…240V AC, 50/60 Hz
150-C30NBD
150-C30FBD
24V AC/DC
150-C30NBR
—
100…240V AC, 50/60 Hz
150-C37NBD
150-C37FBD
24V AC/DC
150-C37NBR
—
100…240V AC, 50/60 Hz
150-C43NBD
150-C43FBD
24V AC/DC
150-C43NBR
—
100…240V AC, 50/60 Hz
150-C60NBD
150-C60FBD
24V AC/DC
150-C60NBR
—
100…240V AC, 50/60 Hz
150-C85NBD
150-C85FBD
24V AC/DC
150-C85NBR
—
100…240V AC, 50/60 Hz
150-C108NBD
150-C108FBD
24V AC/DC♣
150-C108NBR
—
100…240V AC, 50/60 Hz
150-C135NBD
150-C135FBD
24V AC/DC♣
150-C135NBR
—
100…240V AC, 50/60 Hz
150-C201NBD
150-C201FBD
24V AC/DC♣
150-C201NBR
—
100…240V AC, 50/60 Hz
150-C251NBD
150-C251FBD
24V AC/DC♣
150-C251NBR
—
100…240V AC, 50/60 Hz
150-C317NBD
150-C317FBD
24V AC/DC♣
150-C317NBR
—
100…240V AC, 50/60 Hz
150-C361NBD
150-C361FBD
24V AC/DC♣
150-C361NBR
—
100…240V AC, 50/60 Hz
150-C480NBD
150-C480FBD
24V AC/DC♣
150-C480NBR
—
Motor FLA rating should fall within specified current range for unit to operate properly.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
♣ Separate 120V or 240V single phase is required for fan operation.
10
11
12
13
www.ab.com/catalogs
4-140
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Product Selection
Open Type and Non-Combination Enclosed (IP65, NEMA 4/12) Controllers ⎯ For use with Line-Connected Motors,
Continued
Rated Voltage
[V AC]
Motor Current
[A]
1…3
3…9
5.3…16
6.3…19
9.2…25
500/575
Max. kW, 50
Hz
1.5
Max. Hp, 60
Hz
0.75…2
5.5
3…7.5
7.5
5…10
11
7.5…15
15
7.5…20
10…30
18.5
10…25
12.3…37
22
15…30
14.3…43
22
15…40
20…60
37
20…50
28.3…85
27…108
34…135
67…201
84…251
106…317
120…361
160…480
55
30…75
75
60…100
90
75…125
75…132
90…160
100…200
132…250
200…315
Open Type — Line-Connected
Motors
100…200
125…250
200…300
200…350
250…500
IP65 (Type 4/12) Enclosed
Non-Combination Controllers§
Control Power
Cat. No.
Cat. No.
100…240V AC, 50/60 Hz
150-C3NCD
150-C3FCD
24V AC/DC
150-C3NCR
—
100…240V AC, 50/60 Hz
150-C9NCD
150-C9FCD
24V AC/DC
150-C9NCR
—
100…240V AC, 50/60 Hz
150-C16NCD
150-C16FCD
24V AC/DC
150-C16NCR
—
100…240V AC, 50/60 Hz
150-C19NCD
150-C25FCD
24V AC/DC
150-C19NCR
—
100…240V AC, 50/60 Hz
150-C25NCD
150-C25FCD
24V AC/DC
150-C25NCR
—
100…240V AC, 50/60 Hz
150-C30NCD
150-C30FCD
24V AC/DC
150-C30NCR
—
100…240V AC, 50/60 Hz
150-C37NCD
150-C37FCD
24V AC/DC
150-C37NCR
—
100…240V AC, 50/60 Hz
150-C43NCD
150-C43FCD
24V AC/DC
150-C43NCR
—
100…240V AC, 50/60 Hz
150-C60NCD
150-C60FCD
24V AC/DC
150-C60NCR
—
100…240V AC, 50/60 Hz
150-C85NCD
150-C85FCD
0
1
2
3
4
5
24V AC/DC
150-C85NCR
—
100…240V AC, 50/60 Hz
150-C108NCD
150-C108FCD
24V AC/DC♣
150-C108NCR
—
100…240V AC, 50/60 Hz
150-C135NCD
150-C135FCD
24V AC/DC♣
150-C135NCR
—
100…240V AC, 50/60 Hz
150-C201NCD
150-C201FCD
24V AC/DC♣
150-C201NCR
—
100…240V AC, 50/60 Hz
150-C251NCD
150-C251FCD
24V AC/DC♣
150-C251NCR
—
100…240V AC, 50/60 Hz
150-C317NCD
150-C317FCD
24V AC/DC♣
150-C317NCR
—
100…240V AC, 50/60 Hz
150-C361NCD
150-C361FCD
24V AC/DC♣
150-C361NCR
—
100…240V AC, 50/60 Hz
150-C480NCD
150-C480FCD
24V AC/DC♣
150-C480NCR
—
Motor FLA rating should fall within specified current range for unit to operate properly.
§ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
♣ Separate 120V or 240V single phase is required for fan operation.
6
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-141
Bulletin 150
SMC™-3 Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors
0
Rated Voltage
[V AC]
Open Type
Motor Current [A]
1.7…5.1
1
5.1…16
9.1…27.6
10.9…32.8
2
14.3…43
17.3…52
3
21…64
25…74
4
200/208
34.6…104
50…147
5
47…187
59…234
6
116…348
145…435
7
183…549
208…625
277…831
8
Max. kW, 50 Hz
—
Max. Hp, 60 Hz
1
—
—
1.5…3
—
—
3…7.5
—
—
3…10
—
—
3…10
—
—
5…10
—
—
7.5…20
—
—
7.5…20
—
—
15…30
—
—
15…40
—
—
20…60
—
—
20…75
—
—
75…100
—
—
100…150
—
—
100…200
—
—
125…200
—
—
200…300
—
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-C3NBD
24V AC/DC
150-C3NBR
100…240V AC, 50/60 Hz
150-C9NBD
24V AC/DC
150-C9NBR
100…240V AC, 50/60 Hz
150-C16NBD
24V AC/DC
150-C16NBR
100…240V AC, 50/60 Hz
150-C19NBD
24V AC/DC
150-C19NBR
100…240V AC, 50/60 Hz
150-C25NBD
24V AC/DC
150-C25NBR
100…240V AC, 50/60 Hz
150-C30NBD
24V AC/DC
150-C30NBR
100…240V AC, 50/60 Hz
150-C37NBD
24V AC/DC
150-C37NBR
100…240V AC, 50/60 Hz
150-C43NBD
24V AC/DC
150-C43NBR
100…240V AC, 50/60 Hz
150-C60NBD
24V AC/DC
150-C60NBR
100…240V AC, 50/60 Hz
150-C85NBD
24V AC/DC
150-C85NBR
100…240V AC, 50/60 Hz
150-C108NBD
24V AC/DC♣
150-C108NBR
100…240V AC, 50/60 Hz
150-C135NBD
24V AC/DC♣
150-C135NBR
100…240V AC, 50/60 Hz
150-C201NBD
24V AC/DC♣
150-C201NBR
100…240V AC, 50/60 Hz
150-C251NBD
24V AC/DC♣
150-C251NBR
100…240V AC, 50/60 Hz
150-C317NBD
24V AC/DC♣
150-C317NBR
100…240V AC, 50/60 Hz
150-C361NBD
24V AC/DC♣
150-C361NBR
100…240V AC, 50/60 Hz
150-C480NBD
24V AC/DC♣
150-C480NBR
Motor FLA rating should fall within specified current range for unit to operate properly.
♣ Separate 120V or 240V single phase is required for fan operation.
9
10
11
12
13
www.ab.com/catalogs
4-142
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors, Continued
Rated Voltage
[V AC]
Max. kW, 50 Hz
Max. Hp, 60 Hz
1.7…5.1
0.25…1.1
1
5.1…16
9.1…27.6
10.9…32.8
14.3…43
17.3…52
21…64
25…74
230
0
Open Type
Motor Current [A]
1.1…4
1…5
2.2…7.5
3…7.5
2.2…7.5
3…10
4…11
3…15
4…15
5…15
5.5…18.5
7.5…20
5.5…22
7.5…25
34.6…104
7.5…30
15…40
50…147
15…45
20…50
47…187
55
20…60
59…234
75
25…75
116…348
145…435
183…549
208…625
277…831
110
75…125
132
100…150
160
125…200
200
150…250
250
200…300
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-C3NBD
24V AC/DC
150-C3NBR
100…240V AC, 50/60 Hz
150-C9NBD
24V AC/DC
150-C9NBR
100…240V AC, 50/60 Hz
150-C16NBD
24V AC/DC
150-C16NBR
100…240V AC, 50/60 Hz
150-C19NBD
24V AC/DC
150-C19NBR
100…240V AC, 50/60 Hz
150-C25NBD
24V AC/DC
150-C25NBR
100…240V AC, 50/60 Hz
150-C30NBD
24V AC/DC
150-C30NBR
100…240V AC, 50/60 Hz
150-C37NBD
24V AC/DC
150-C37NBR
100…240V AC, 50/60 Hz
150-C43NBD
24V AC/DC
150-C43NBR
100…240V AC, 50/60 Hz
150-C60NBD
24V AC/DC
150-C60NBR
100…240V AC, 50/60 Hz
150-C85NBD
24V AC/DC
150-C85NBR
100…240V AC, 50/60 Hz
150-C108NBD
24V AC/DC♣
150-C108NBR
100…240V AC, 50/60 Hz
150-C135NBD
24V AC/DC♣
150-C135NBR
100…240V AC, 50/60 Hz
150-C201NBD
24V AC/DC♣
150-C201NBR
100…240V AC, 50/60 Hz
150-C251NBD
24V AC/DC♣
150-C251NBR
100…240V AC, 50/60 Hz
150-C317NBD
24V AC/DC♣
150-C317NBR
100…240V AC, 50/60 Hz
150-C361NBD
24V AC/DC♣
150-C361NBR
100…240V AC, 50/60 Hz
150-C480NBD
24V AC/DC♣
150-C480NBR
1
2
3
4
5
6
7
8
Motor FLA rating should fall within specified current range for unit to operate properly.
♣ Separate 120V or 240V single phase is required for fan operation.
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-143
Bulletin 150
SMC™-3 Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors, Continued
0
Rated Voltage
[V AC]
Open Type
Motor Current [A]
1.7…5.1
1
5.1…16
9.1…27.6
10.9…32.8
2
14.3…43
17.3…52
3
21…64
25…74
4
380/400/415/460
34.6…104
50…147
5
47…187
59…234
6
116…348
145…435
7
183…549
208…625
277…831
8
Max. kW, 50 Hz
0.55…2.2
Max. Hp, 60 Hz
0.5…2
2.2…7.5
2…7.5
4…11
5…15
4…15
5…15
5.5…22
7.5…20
7.5…22
7.5…30
7.5…30
10…40
11…37
10…50
15…55
20…75
22…75
25…100
90
40…150
132
50…150
160
150…250
250
200…350
315
250…450
355
300…500
450
350…700
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-C3NBD
24V AC/DC
150-C3NBR
100…240V AC, 50/60 Hz
150-C9NBD
24V AC/DC
150-C9NBR
100…240V AC, 50/60 Hz
150-C16NBD
24V AC/DC
150-C16NBR
100…240V AC, 50/60 Hz
150-C19NBD
24V AC/DC
150-C19NBR
100…240V AC, 50/60 Hz
150-C25NBD
24V AC/DC
150-C25NBR
100…240V AC, 50/60 Hz
150-C30NBD
24V AC/DC
150-C30NBR
100…240V AC, 50/60 Hz
150-C37NBD
24V AC/DC
150-C37NBR
100…240V AC, 50/60 Hz
150-C43NBD
24V AC/DC
150-C43NBR
100…240V AC, 50/60 Hz
150-C60NBD
24V AC/DC
150-C60NBR
100…240V AC, 50/60 Hz
150-C85NBD
24V AC/DC
150-C85NBR
100…240V AC, 50/60 Hz
150-C108NBD
24V AC/DC♣
150-C108NBR
100…240V AC, 50/60 Hz
150-C135NBD
24V AC/DC♣
150-C135NBR
100…240V AC, 50/60 Hz
150-C201NBD
24V AC/DC♣
150-C201NBR
100…240V AC, 50/60 Hz
150-C251NBD
24V AC/DC♣
150-C251NBR
100…240V AC, 50/60 Hz
150-C317NBD
24V AC/DC♣
150-C317NBR
100…240V AC, 50/60 Hz
150-C361NBD
24V AC/DC♣
150-C361NBR
100…240V AC, 50/60 Hz
150-C480NBD
24V AC/DC♣
150-C480NBR
Motor FLA rating should fall within specified current range for unit to operate properly.
♣ Separate 120V or 240V single phase is required for fan operation.
9
10
11
12
13
www.ab.com/catalogs
4-144
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Product Selection
Open Type Controllers ⎯ For use with Delta-Connected Motors, Continued
Rated Voltage
[V AC]
Max. kW, 50 Hz
Max. Hp, 60 Hz
1.7…5.1
0.75…3
1…3
5.1…16
9.1…27.6
10.9…32.8
14.3…43
17.3…52
21…64
25…74
500/575
0
Open Type
Motor Current [A]
3…7.5
3…10
5.5…15
7.5…20
5.5…22
7.5…30
7.5…22
10…40
11…30
15…50
11…37
15…60
15…45
20…60
34.6…104
22…55
30…100
50…147
30…90
40…150
47…187
132
50…150
59…234
160
60…200
116…348
145…435
183…549
208…625
277…831
250
250…300
315
250…400
400
300…500
450
350…600
560
400…900
Control Power
Cat. No.
100…240V AC, 50/60 Hz
150-C3NCD
24V AC/DC
150-C3NCR
100…240V AC, 50/60 Hz
150-C9NCD
24V AC/DC
150-C9NCR
100…240V AC, 50/60 Hz
150-C16NCD
24V AC/DC
150-C16NCR
100…240V AC, 50/60 Hz
150-C19NCD
24V AC/DC
150-C19NCR
100…240V AC, 50/60 Hz
150-C25NCD
24V AC/DC
150-C25NCR
100…240V AC, 50/60 Hz
150-C30NCD
24V AC/DC
150-C30NCR
100…240V AC, 50/60 Hz
150-C37NCD
24V AC/DC
150-C37NCR
100…240V AC, 50/60 Hz
150-C43NCD
24V AC/DC
150-C43NCR
100…240V AC, 50/60 Hz
150-C60NCD
24V AC/DC
150-C60NCR
100…240V AC, 50/60 Hz
150-C85NCD
24V AC/DC
150-C85NCR
100…240V AC, 50/60 Hz
150-C108NCD
24V AC/DC♣
150-C108NCR
100…240V AC, 50/60 Hz
150-C135NCD
24V AC/DC♣
150-C135NCR
100…240V AC, 50/60 Hz
150-C201NCD
24V AC/DC♣
150-C201NCR
100…240V AC, 50/60 Hz
150-C251NCD
24V AC/DC♣
150-C251NCR
100…240V AC, 50/60 Hz
150-C317NCD
24V AC/DC♣
150-C317NCR
100…240V AC, 50/60 Hz
150-C361NCD
24V AC/DC♣
150-C361NCR
100…240V AC, 50/60 Hz
150-C480NCD
24V AC/DC♣
150-C480NCR
1
2
3
4
5
6
7
8
Motor FLA rating should fall within specified current range for unit to operate properly.
♣ Separate 120V or 240V single phase is required for fan operation.
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-145
Bulletin 150
SMC™-3 Smart Motor Controllers
Product Selection
Combination Enclosed (IP65, NEMA 4/12) Controllers with Fusible Disconnect or Circuit Breaker
0
Rated Voltage
[V AC]
1
2
200/208
3
4
5
6
7
230
8
9
10
Current
Rating [A]
kW
Hp
IP65 (Type 4/12) Enclosed
Combination Controllers with
Fusible Disconnect Cat. No.
3
—
0.5
152H-C3FHD-33
153H-C3FHD-33
9
—
0.75
152H-C9FHD-34
153H-C9FHD-34
9
—
1
152H-C9FHD-35
153H-C9FHD-35
9
—
1.5
152H-C9FHD-36
153H-C9FHD-36
16
—
2
152H-C16FHD-37
153H-C16FHD-37
16
—
3
152H-C16FHD-38
153H-C16FHD-38
25
—
5
152H-C25FHD-39
153H-C25FHD-39
37
—
7.5
152H-C37FHD-40
153H-C37FHD-40
43
—
10
152H-C43FHD-41
153H-C43FHD-41
60
—
15
152H-C60FHD-42
153H-C60FHD-42
85
—
20
152H-C85FHD-43
153H-C85FHD-43
85
—
25
152H-C85FHD-44
153H-C85FHD-44
108
—
30
152H-C108FHD-45
153H-C108FHD-45
135
—
40
152H-C135FHD-46
153H-C135FHD-46
201
—
60
152H-C201FHD-48
153H-C201FHD-48
251
—
75
152H-C251FHD-49
153H-C251FHD-49
317
—
100
152H-C317FHD-50
153H-C317FHD-50
361
—
125
152H-C361FHD-51
153H-C361FHD-51
480
—
150
152H-C480FHD-52
153H-C480FHD-52
3
0.37
0.5
152H-C3FAD-33
153H-C3FAD-33
9
0.55
0.75
152H-C9FAD-34
153H-C9FAD-34
9
0.75
1
152H-C9FAD-35
153H-C9FAD-35
9
1.1
1.5
152H-C9FAD-36
153H-C9FAD-36
9
1.5
2
152H-C9FAD-37
153H-C9FAD-37
16
2.2
3
152H-C16FAD-38
153H-C16FAD-38
25
3.7
5
152H-C25FAD-39
153H-C25FAD-39
30
5.5
7.5
152H-C30FAD-40
153H-C30FAD-40
37
7.5
10
152H-C37FAD-41
153H-C37FAD-41
43
11
15
152H-C43FAD-42
153H-C43FAD-42
60
15
20
152H-C60FAD-43
153H-C60FAD-43
85
18.5
25
152H-C85FAD-44
153H-C85FAD-44
85
22
30
152H-C85FAD-45
153H-C85FAD-45
108
30
40
152H-C108FAD-46
153H-C108FAD-46
135
37
50
152H-C135FAD-47
153H-C135FAD-47
201
55
75
152H-C201FAD-49
153H-C201FAD-49
251
75
100
152H-C251FAD-50
153H-C251FAD-50
317
90
125
152H-C317FAD-51
153H-C317FAD-51
361
110
150
152H-C361FAD-52
153H-C361FAD-52
480
147
200
§
152H-C480JAD-54
IP65 (Type 4/12) Enclosed
Combination Controllers
with Circuit Breaker Cat. No.
153H-C480FAD-54
These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
§ Available in IP54 (Type 12) enclosure only.
11
12
13
www.ab.com/catalogs
4-146
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Product Selection
Combination Enclosed (IP65, NEMA 4/12) Controllers with Fusible Disconnect or Circuit Breaker, Continued
Rated Voltage
[V AC]
460
500/575
Current
Rating [A]
kW
Hp
IP65 (Type 4/12) Enclosed
Combination Controllers with
Fusible Disconnect Cat. No.
IP65 (Type 4/12) Enclosed
Combination Controllers
with Circuit Breaker Cat. No.
3
0.37
0.5
152H-C3FBD-33
153H-C3FBD-33
3
0.55
0.75
152H-C3FBD-34
153H-C3FBD-34
3
0.75
1
152H-C3FBD-35
153H-C3FBD-35
9
1.1
1.5
152H-C9FBD-36
153H-C9FBD-36
9
1.5
2
152H-C9FBD-37
153H-C9FBD-37
9
2.2
3
152H-C9FBD-38
153H-C9FBD-38
16
3.7
5
152H-C16FBD-39
153H-C16FBD-39
16
5.5
7.5
152H-C16FBD-40
153H-C16FBD-40
25
7.5
10
152H-C25FBD-41
153H-C25FBD-41
30
11
15
152H-C30FBD-42
153H-C30FBD-42
37
15
20
152H-C37FBD-43
153H-C37FBD-43
43
18.5
25
152H-C43FBD-44
153H-C43FBD-44
43
22
30
152H-C43FBD-45
153H-C43FBD-45
60
30
40
152H-C60FBD-46
153H-C60FBD-46
85
37
50
152H-C85FBD-47
153H-C85FBD-47
85
45
60
152H-C85FBD-48
153H-C85FBD-48
108
55
75
152H-C108FBD-49
153H-C108FBD-49
135
75
100
152H-C135FBD-50
153H-C135FBD-50
201
110
150
152H-C201FBD-52
153H-C201FBD-52
251
132
200
152H-C251FBD-54
153H-C251FBD-54
317
160
250
152H-C317FBD-56
153H-C317FBD-56
361
200
300
152H-C361FBD-57
153H-C361FBD-57
480
250
400
3
0.55
0.75
152H-C3FCD-34
153H-C3FCD-34
3
0.75
1
152H-C3FCD-35
153H-C3FCD-35
9
1.1
1.5
152H-C9FCD-36
153H-C9FCD-36
9
1.5
2
152H-C9FCD-37
153H-C9FCD-37
9
2.2
3
152H-C9FCD-38
153H-C9FCD-38
9
3.7
5
152H-C9FCD-39
153H-C9FCD-39
16
5.5
7.5
152H-C16FCD-40
153H-C16FCD-40
16
7.5
10
152H-C16FCD-41
153H-C16FCD-41
25
11
15
152H-C25FCD-42
153H-C25FCD-42
30
15
20
152H-C30FCD-43
153H-C30FCD-43
37
18.5
25
152H-C37FCD-44
153H-C37FCD-44
43
22
30
152H-C43FCD-45
153H-C43FCD-45
43
30
40
152H-C43FCD-46
153H-C43FCD-46
60
37
50
152H-C60FCD-47
153H-C60FCD-47
85
45
60
152H-C85FCD-48
153H-C85FCD-48
§
152H-C480JBD-59
85
55
75
152H-C85FCD-49
153H-C85FCD-49
75
100
152H-C108FCD-50
153H-C108FCD-50
135
90
125
152H-C135FCD-51
153H-C135FCD-51
201
132
200
152H-C201FCD-54
153H-C201FCD-54
251
160
250
152H-C251FCD-56
153H-C251FCD-56
317
200
300
152H-C317FCD-57
153H-C317FCD-57
361
250
350
152H-C361FCD-58
153H-C361FCD-58
480
315
500
152H-C480JCD-61
1
2
3
4
5
153H-C480FBD-59
108
§
0
153H-C480FCD-61
6
7
8
9
10
11
These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the
appropriate option code to the catalog string.
§ Available in IP54 (Type 12) enclosure only.
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-147
Bulletin 150
SMC™-3 Smart Motor Controllers
Modifications/Accessories
Enclosed Options
0
1
2
3
Option
Cat. No.
Modification
Description
-1
Push Buttons
Start-Stop Push Button
Selector Switch
Hand-Off-Auto Selector Switch
Pilot Light
Transformer Pilot Light - Red Run Indicator
-3
-4R
Control Circuit Transformer Control Circuit Transformer (fused primary and secondary)
Protective Module
Auxiliary Contacts
Disconnect Auxiliary
-6P
480V Line Side Protective Module
3…480 A
600V Line Side Protective Module
3…480 A
480V Load Side Protective Module
43…480 A
600V Load Side Protective Module
43…480 A
480V Both Line and Load Side Protective Module
43…480 A
600V Both Line and Load Side Protective Module
43…480 A
-8L
-8M
-8B
1 N.O. auxiliary contact
for 3…480 A units
-90
2 N.O. auxiliary contacts
for 3…480 A units
-900
1 N.O. and 1 N.C. auxiliary contacts
for 3…480 A units
-901
N.O. disconnect auxiliary mounted on the operating mechanism
-98
N.C. disconnect auxiliary mounted on the operating mechanism
-99
5…43 A
4
60…85 A
NEMA Bypass Contactor
and Overload Relay
108…135 A
-NB
201…251 A
317…361 A
480 A
5
5…43 A
60…85 A
6
MCS Bypass Contactor
and Overload Relay
108…135 A
-BP
201…251 A
317…361 A
480 A
7
Accessories
Auxiliary Contact Blocks
Description
Auxiliary Contact Blocks for side mounting with
sequence terminal designations
1- and 2-pole
Quick and easy mounting without tools
One block per device only
8
9
N.O.
N.C.
1
0
Connection Diagram
Cat. No.
2
0
150-CA20
0
1
150-CA01
1
1
150-CA11
(Form C)
150-CA10
Fans
Description
For Use With
Optional
Pkg. Qty.
150-C3…37
150-C43…85
Fan
Field installed
10
11
Replacement
150-C108, 150-C135
Cat. No.
150-CF64
150-CF147
1
41391-801-03
150-C201, 150-C251
41391-801-01
150-C317…C480
41391-801-02
Connecting Modules
Description
Connecting modules to 140-M
Electrical interconnection between SMC-3 and 140-M.
Motor protector and SMC must be mounted separately.
12
Connecting modules to 100-C
Electrical interconnection between SMC-3 and 100-C.
Contactor and SMC must be mounted separately.
13
www.ab.com/catalogs
4-148
For Use With
Pkg. Qty.
Cat. No.
Connects 140-M-C to
150-C3…25
1
150-CC25
Connects 140-M-D to
150-C3…25
1
150-CD25
Connects 140-M-F to
150-C3…37
1
150-CF45
Connects 100-C09…23 to
150-C3…19
1
150-CI23
Connects 100-C30…37 to
150-C3…37
1
150-CI37
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Accessories
Protective Modules
Protective modules must not be placed on the load side of a device when using an inside-the-delta connection.
Description
480V Protective Module
For Use With
Pkg. Qty.
Cat. No.
150-C3…37NB
1
150-C84
150-C43…85NB (line and/or load)
1
150-C84P
150-C108…480NB (line and/or load)
1
150-F84L
150-C3…37NC
1
150-C86
150-C43…85NC (line and/or load)
1
150-C86P
150-C108…480NC (line and/or load)
1
150-F86L
For Use With
Pkg. Qty.
Cat. No.
150-C108…-C135
1
150-TC1
150-C201…-C251
1
150-TC2
150-C317…-C480
1
150-TC3
600V Protective Module
IEC Terminal Covers
Description
Terminal Cover
IEC line or load terminal covers for 108…480 A devices.
Dead front protection
0
1
2
3
Terminal Lug Kits (108…480 A)
Total No. of Line Controller
Terminal Lugs
Possible Each Side
Current
Rating [A] 108…135♣
201…251♣
Wire Size
Line Side
#6…250 MCM AWG
16 mm2…120 mm2
3
3
6
6
6
6
4
Load Side
Pkg. Qty.
Cat. No.
199-LF1
3
#4…500 MCM AWG
25 mm2…240 mm2
317…480♣
199-LG1
Line and Load terminals are provided as standard on enclosed SMCs.
1…85 A units have box lugs standard. No additional lugs are required.
♣ When a multi-conductor lug is required, refer to the Instruction Sheet for appropriate lug catalog number.
5
6
Marking Tags and Covers
For Use With
Pkg. Qty.
Cat. No.
Marking Tag Sheet
160 perforated paper labels each, 6 x 17 mm, to be used
with a transparent cover
Description
150-C, 150-D
10
100-FMP
Transparent Cover
To be used with marking tag sheets
150-C, 150-D
100
100-FMC
7
8
Remote Reset Solenoid
Description
Remote Reset Solenoid for remote reset of electronic
overload
For Use With
Pkg. Qty.
Cat. No.
193-T all, 150-C
1
193-ER1⊗
9
10
⊗ Voltage Suffix Code
Voltage
24
48
110
115
120
220
240
50 Hz
J
—
D
—
—
A
—
60 Hz
J
—
—
—
D
—
A
DC
Z24
Z48
—
Z01
—
—
—
11
Surcharge for special voltages up to 20 pcs. (no surcharge for quantities greater than 20 pcs.)
Available Coil Voltages 12…600V 50 Hz/12…600V 60 Hz
Standard Coil Voltages
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-149
Bulletin 150
SMC™-3 Smart Motor Controllers
Typical Wiring Diagrams
0
Two-Wire Configuration
IEC
NEMA
1
H3
H1
2
H2
H4
Trans.
-TC
X2
X1
Ground
3
-E1
(Power
Connections)
-SB
E-Stop
Two-Wire
Device
4
A1
A2
5
IN1
IN2
97
98
OVLD/Fault
13
14
AUX #1
SMC-3 Control Terminals
-E1
6
Three-Wire Configuration
IEC
NEMA
7
8
H3
H1
H2
H4
Trans.
-TC
X1
9
X2
Ground
-E1
(Power
Connections)
-SB1
E-Stop
10
-SB2
Stop Option
11
-SB3
Start
A1
A2
IN1
IN2
97
98
OVLD/Fault
12
13
14
AUX #1
SMC-3 Control Terminals
-E1
13
www.ab.com/catalogs
4-150
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Typical Wiring Diagrams
Isolation Contactor Configuration
IEC
NEMA
0
IC
L1/1
T1/2
L2/3
T2/4
L3/5
T3/6
1
SMC-3
(Power connections)
H3 H2
H1 H4
-KM
Motor
Trans.
-TC
X2
X1
2
Ground
-E1
(Power
Connections)
H3 H2
H1 H4
E-Stop
-SB1
E-Stop
Ground
Trans.
X2
Start
X1
Stop Option
3
IC
-SB2
Stop Option
4
-KM
-SB3
Start
A1
A1
A2
IN1
IN2
97
98
13
OVLD/Fault
A2
IN1
IN2
97
98
13
5
14
14
OVLD/Fault
AUX #1
AUX #1
SMC-3 Control Terminals
SMC-3 Control Terminals
-E1
6
Reversing Configuration
Note: Minimum Off time equals 1.0 s.
IEC
NEMA
7
F
L1/1
T1/2
L2/3
T2/4
L3/5
T3/6
R
H3 H2
H1 H4
-TC
X1
-KM1
-KM2
Motor
8
SMC-3
(Power connections)
Trans.
X2
9
Ground
H3 H2
H1 H4
E-Stop
-SB
E-Stop
X1
OFF
FOR
REV
Ground
Trans.
X2
R
F
-E1
(Power
Connections)
FOR
10
F
OFF
REV
R
-SA
R
-KM2
-KM1
-KM2
-KM1
F
-KM1
A1
A2
IN1
11
-KM2
IN2
97
98
OVLD/Fault
13
AUX #1
12
14
A1
A2
IN1
IN2
97
98
13
14
SMC-3 Control Terminals
OVLD/Fault
AUX #1
SMC-3 Control Terminals
www.ab.com/catalogs
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-151
Bulletin 150
SMC™-3 Smart Motor Controllers
Specifications
Standard Features
0
Selectable
Selectable
Selectable
Selectable
Selectable
Start Times
Initial Torque
Current Limit
Kick Start — 450% FLA
Soft Stop
1
2
3
Power Circuit
4
5
6
7
8
Short Circuit
Protection
9
10
11
12
13
2, 5, 10, 15, 20, 25, or 30 s
0%, 25%, 35%, and 65% of locked rotor torque
150%, 250%, 350%, and 450% of full load current
0, 0.5, 1.0, or 1.5 s
Off, 100%, 200%, or 300% of the start time setting when wired
Electrical Ratings
UL/CSA/NEMA
IEC
200…480V AC
200…480V~ — 400V~
Rated Operation Voltage
200…600V AC
500V~ — 500V~
Rated Insulation Voltage
600V AC
500V~
Dielectric Withstand
2200V AC
2500V~
200…480V AC: 1400V
200…480V~: 1400V
Repetitive Peak
200…600V AC: 1600V
500V~: 1600V
Operating Frequency
50/60 Hz
50/60 Hz
1…37 A
AC-53b: 3.5-15:3585
⎯
43…60 A
AC-53b: 4.5-30:1770
⎯
85 A
AC-53b: 4.5-30:3570
⎯
Utilization
108 A
AC-53b: 4.5-30:1770
⎯
Category
135 A
AC-53b: 3.5-30: 1770
⎯
201…251 A
AC-53b: 3.5-30: 1770
⎯
317…480 A
AC-53b: 3.5-30: 1770
⎯
Number of Poles
Equipment designed for 3-phase only
Rated Impulse Voltage
6 kV
DV/DT Protection
1000V/μs
Overvoltage Category
III
Type 1§♣
SCPD Performance
High Capacity Time Delay
Non-Time Delay
Thermal Magnetic Circuit Breaker
Class CC/J/L
Max. Circuit
Max. Standard
Max. Standard Max. Standard Max. Standard
SCPD List‡
Max. Fuse [A]
Fuse [A]
Available Fault
Breaker [A]
Available Fault
Available Fault
3
5 kA
12
5 kA
15
70 kA
6
9
5 kA
30
5 kA
30
70 kA
15
16
5 kA
60
5 kA
60
70 kA
30
19
5 kA
70
5 kA
70
70 kA
40
25
5 kA
100
5 kA
100
70 kA
50
30
10 kA
110
10 kA
110
70 kA
60
37
10 kA
125
10 kA
125
70 kA
60
Line Device
43
10 kA
150
10 kA
150
70 kA
90
Operational
60
10 kA
225
10 kA
225
70 kA
125
Current Rating
85
10 kA
300
10 kA
300
70 kA
175
[A]
108
10 kA
400
10 kA
300
70 kA
200
135
10 kA
500
10 kA
400
70 kA
250
201
18 kA
600
18 kA
600
70 kA
350
251
18 kA
700
18 kA
700
70 kA
400
317
30 kA
800
30 kA
800
69 kA
500
361
30 kA
1000
30 kA
1000
69 kA
600
480
42 kA
1200
42 kA
1200
69 kA
800
5.1
5 kA
15
5 kA
15
70 kA
10
16
5 kA
60
5 kA
60
70 kA
30
27.6
5 kA
70
5 kA
70
70 kA
60
32.8
5 kA
125
5 kA
125
70 kA
70
43
5 kA
150
5 kA
150
70 kA
90
52
10 kA
200
10 kA
200
70 kA
100
64
10 kA
250
10 kA
250
70 kA
100
74
10 kA
250
10 kA
250
70 kA
150
Delta Device
104
10 kA
400
10 kA
300
70 kA
225
Operational
Current Rating
147
10 kA
400
10 kA
400
70 kA
300
[A]
187
10 kA
600
10 kA
500
70 kA
400
234
10 kA
700
10 kA
700
70 kA
400
348
18 kA
1000
18 kA
1000
70 kA
600
435
18 kA
1200
18 kA
1200
69 kA
800
549
30 kA
1600
30 kA
1600
69 kA
1000
625
30 kA
1600
30 kA
1600
69 kA
1200
831
42 kA
1600
30 kA
1600
69 kA
1600
831
42 kA
1600
42 kA
1200
69 kA
1600
Non-time delay fuses (K5).
‡ Consult local codes for proper sizing of short-circuit protection.
§ Type 1 performance/protection indicates that, under a short-circuit condition, the fused or circuit breaker-protected starter shall cause no danger to persons or
installation but may not be suitable for further service without repair or replacement.
www.ab.com/catalogs
4-152
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™-3
Smart Motor Controllers
Specifications
Electrical Ratings
Control Circuit
Rated Operational Voltage (+10%, –15%)
Rated Insulation Voltage
Rated Impulse Voltage
Dielectric Withstand
Overvoltage Category
Operating Frequency
Input onstate voltage minimum, during start (IN1, IN2)
Input onstate current (IN1, IN2)
Input offstate voltage maximum (IN1, IN2)
Input offstate current @ input offstate voltage (IN1, IN2)
3…37 A
43…85 A
Control Power with Fan, during start
108…135 A
201…251 A
317…480 A
Control Power without Fan, during start
3…37 A
Controller Rating [A]
3
9
16
19
25
30
37
43
Steady State Heat Dissipation and Overload Current Range
60
85
108
135
201
251
317
361
480
UL/CSA/NEMA
IEC
100…240V AC, 24V AC/DC
100…240V~, 24V AC/DC
250V
250V~
2.5 kV
4 kV
1500V AC
2000V~
II
III1
50/60 Hz
50/60 Hz
85V AC, 19.2V DC / 19.2V AC
9.8 mA @120V AC/19.6 mA @ 240V AC, 7.3 mA @ 24V AC/DC
40V AC, 17V DC / 12V AC
<10 mA, <12 mA
215 mA @ 120V AC / 180 mA @ 240V AC, 800 mA @ 24V DC / 660 mA @
24V AC
200 mA @ 120V AC / 100 mA @ 240V AC, 700 mA @ 24V AC/DC
Fan Power
Control Power
20VA
200 mA @ 120V AC / 120 mA @ 240V AC, 600 mA @ 24V
40VA
AC/DC
60VA
205 mA @ 120V AC / 145 mA @ 240V AC, 705 mA @ 24V DC / 580 mA @
24V AC
Steady State Heat Dissipation [W]
Overload Current Range [A]
11
1…3
12
3…9
14
5.3…16
15
6.3…19
17
9.2…27.7
19
10…30
24
12.3…37
34
14.3…43
50
20…60
82
28.3…85
62
27…108
75
34…135
129
67…201
147
84…251
174
106…317
194
120…361
239
160…480
0
1
2
3
4
5
6
7
Auxiliary Contacts
UL/CSA/NEMA
IEC
250V AC/30V DC
250V~/30V DC
250V
250V~
2.5 kV
4 kV
1500V AC
2000V~
II
III1
50/60 Hz
50/60 Hz
D300/D300
AC-15/DC
Electromagnetic relay
1
Normally Open (N.O.)
AC/DC
0.6 A @ 120V~ and 0.3 A @ 240V~
1A
432/72
Electromagnetic relay
1
Normally Open (N.O.)
AC/DC
0.6 A @ 120V~ and 0.3 A @ 240V~
1A
432/72
Rated Operational Voltage
Rated Insulation Voltage
Rated Impulse Voltage
Dielectric Withstand
Overvoltage Category
Operating Frequency
Utilization Category
TB-97, -98
(OVLD/Fault)
TB-13, -14 Aux 1
(Normal/Up-to-Speed)
Type of Control Circuit
Number of Contacts
Type of Contacts
Type of Current
Rated Operational Current (max.)
Conventional Thermal Current Ith
Make/Break VA
Type of Control Circuit
Number of Contacts
Type of Contacts
Type of Current
Rated Operational Current (max.)
Conventional Thermal Current Ith
Make/Break VA
8
9
10
11
12
1 Overvoltage category II, when either control or auxiliary circuit is wired to a SELV or PELV circuit.
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-153
Bulletin 150
SMC™-3 Smart Motor Controllers
Specifications
Electrical Ratings
Side-Mount Auxiliary Contacts
0
1
2
Utilization Category
Type of Control Circuit
Number of Contacts
Type of Contacts
Type of Current
Rated Operational Current (max.)
Conventional Thermal Current Ith
TB-23, -24
(Normal/Up-to-Speed)
TB-33, -34
(Normal/Up-to-Speed)
Make/Break VA
Type of Control Circuit
Type of Control Circuit
Number of Contacts
Type of Contacts
Type of Current
Rated Operational Current (max.)
Conventional Thermal Current Ith
3
4
UL/CSA/NEMA
IEC
250V AC/30V DC
250V AC/30V DC
250V
250V AC
2.5 kV
4 kV
1500V AC
2000V AC
II
III1
50/60 Hz
50/60 Hz
C300/R150
AC-15/DC-13
Electromagnetic relay
1
Normally Open (N.O.)
AC/DC
1.5 A @ 120V AC, 0.75A @ 240V AC, 1.17 A @ 24V DC
2.5 A
1800/180V AC, 28V DC (resistive)
B300/R300
AC-15/DC-13
Electromagnetic relay
1
Normally Closed (N.C.)
AC/DC
3 A @ 120V AC, 1.5A @ 240V AC, 1.17 A @ 24V DC
5A
3600/360VA, 28VA (DC resistive)
Rated Operational Voltage
Rated Insulation Voltage
Rated Impulse Voltage
Dielectric Withstand
Overvoltage Category
Operating Frequency
TB-11, -12
(Normal/Up-to-Speed)
Make/Break VA
5
1 Overvoltage category II, when either control or auxiliary circuit is wired to a SELV or PELV circuit.
Environmental
-5…+50 °C (23…122 °F) (open)
-5…+40 °C (23…104 °F) (enclosed)
-25…+85 °C (-13…+185 °F)
2000 m (6560 ft)
5…95% (non-condensing)
2
IP2X
Operating Temperature Range
6
Storage and Transportation Temperature Range
Altitude
Humidity
Pollution Degree
Type of Protection
7
Mechanical Ratings
Resistance to Vibration
Resistance to Shock
Operational
Non-Operational
Operational
Non-Operational
8
3…37 A
Line Power Terminals
43…85 A
Cable Size
Tightening Torque
108…135 A
201…251 A
317…480 A
9
3…37 A
10
Load Power Terminals
Control Terminals
43…85 A
Cable Size
Tightening Torque
108…135 A
201…251 A
317…480 A
Cable Size
Tightening Torque
All
11
Other
EMC Emission Levels
12
1.0 G Peak, 0.15 mm (0.006 in.) displacement
2.5 G Peak, 0.38 mm (0.015 in.) displacement
15 G
30 G
2.5…25 mm2 (14…4 AWG)
2.3…2.8 N•m (20…25 in•lbs)
2.5…95 mm2 (14…3/0 AWG)
11.3…12.4 N•m (100…110 in•lbs)
23 N•m (200 in•lbs)
Two M10 x 1.5 diameter holes per power pole
Two M12 x 1.75 diameter holes per power pole
2.5…16 mm2 (14…6 AWG)
2.3…2.5 N•m (20…22.5 in•lbs)
2.5…50 mm2 (14…1 AWG)
11.3…12.4 N•m (100…110 in•lbs)
23 N•m (200 in•lbs)
Two M10 x 1.5 diameter holes per power pole
Two M12 x 1.75 diameter holes per power pole
0.2…2.5 mm2 (24…14 AWG)
0.5…0.9 N•m (4.4…8.0 in•lbs)
UL/CSA/NEMA
⎯
⎯
4 kV Contact and 8 kV
Air Discharge
⎯
⎯
⎯
Conducted Radio Frequency Emissions
Radiated Emissions
Electrostatic Discharge
EMC Immunity Levels
Radio Frequency Electromagnetic Field
Fast Transient
Surge Transient
13
www.ab.com/catalogs
4-154
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
IEC
Class A
Class A
8 kV Air Discharge
Per EN/IEC 60947-4-2
Per EN/IEC 60947-4-2
Per EN/IEC 60947-4-2
Bulletin 150
SMC™-3
Smart Motor Controllers
Specifications
SMC-3 Overload Trip Curves
Trip Class 10
Trip Class 15
Trip Class 20
Cold Trip
Hot Trip
Hot Trip
1
t (sec)
t (sec)
t (sec)
Hot Trip
0
Cold Trip
Cold Trip
2
3
Current
Current
Current
4
Starts per Hour Curves
SMC-3 Starts per hour
(3…37 A)
(3…37 A)
40 °C, 100% Duty Cycle, 10 s, 350% with Fan
SMC-3 Starts per hour(3…37
(3…37
A)
A)
40 °C, 100% Duty Cycle, 10 s, 350% with Fan
SMC-3 Starts per hour (43…85 A)
40C,100% Duty Cycle, 20 sec, 350% (with standard fan)
5
200
180
160
6
120
Starts
Starts/Hour
Starts/Hour
140
100
80
60
7
40
20
Current [A]
150-C43
150-C60
0
Current [A]
150-C85
0 10 20 30 40 50 60 70 80 90
8
Current (amps)
9
SMC-3 Starts per hour (201…480 A)
40C, 100% Duty Cycle, 20 sec, 350% (with standard fan)
SMC-3 Starts per hour (108…135 A)
40C, 100% Duty Cycle, 20 sec, 350% (w ith standard fan)
315
200
150C201,C251
150C317,C361
150-C480
265
180
10
Starts / hour
215
160
140
Start/Hour
120
100
165
115
11
65
80
15
60
60
160
260
360
460
12
C u r r e n t (A m ps )
40
20
150-C108
150-F135
0
0
10
20
30
40
50
60
70
80
90
100 110 120 130 140 150
13
Current (am ps)
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-155
Bulletin 150
SMC™-3 Smart Motor Controllers
Approximate Dimensions
0
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
Open Type
1
2
3
4
5
6
Controller
Rating [A]
A
B
C
D
E
F
G
Mounting
Hole Size
Weight
kg (lbs)
1…37
44.8 (1-49/64)
139.7 (5-1/2)
100 (4-21/64)
35 (1-3/8)
132 (5-13/64)
46.4 (1.81)
2 (1/16)
4.6 (0.18)
0.86 (1.9)
43…85
72 (2.83)
206 (8.11)
130 (5.12)
55 (2.17)
198 (7.8)
102 (4.02)
2 (1/16)
5.3 (0.21)
2.25 (5.0)
108…135
196.4 (7.74)
443.7 (17.47)
205.2 (8.08)
166.6 (6.56)
367 (14.45)
⎯
⎯
7.5 (0.295)
15 (33)
201…251
225 (8.86)
560 (22.05)
265.3 (10.45)
150 (5.91)
504.1 (19.85)
⎯
⎯
11.5 (0.45)
30.4 (67)
317…480
290 (11.42)
600 (23.62)
298 (11.73)
200 (7.87)
539.2 (21.23)
⎯
⎯
11.5 (0.45)
45.8 (101)
Minimum Enclosure Size
7
8
9
10
11
12
Controller
Rating [A]
B Height
A Width
C Depth
1…37 A
305 (12)
224 (9)
152 (6)
none
43…85 A
406 (16)
305 (12)
203 (8)
none
108…135 A
762 (30)
610 (24)
305 (12)
none
201…251 A
965 (38)
762 (30)
356 (14)
none
317…480 A
1295 (51)
914 (36)
356 (14)
none
13
www.ab.com/catalogs
4-156
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Fan Requirements
Bulletin 150
SMC™-3
Smart Motor Controllers
Approximate Dimensions
Enclosed Type Line-Connected Controllers
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. All dimensions are subject to
change.
A
A
D
C
E
0
C
D
1
B
E
B
2
F
3
F
Figure 1 — Wall-Mount
Figure 2 — Wall-Mount
C
LIFTING ANGLE
4
C
5
6
B
B
7
8
A
Figure 3 — Floor-Mount
A
Figure 4 — Floor-Mount
9
Controller
Rating [A]
Bulletin
With Option
Dimension
Figure No.
Dimensions in inches (mm)
A (Width)
B (Height)
C (Depth)
D (Mtg. Dim.) E (Mtg. Dim.) F (Mtg. Dim.)
SMC-3 Non-Combination Controller
—
8 (203)
12 (305)
6 (152)
2.44 (62)
10.43 (265)
3.0 (76)
12 (305)
6 (152)
2.41 (61)
10.43 (265)
7.0 (178)
150
43…85
150
—
1
108…135
150
Any
1
150
—
150, 150B
BP,NB,NI,6P
150
Any
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
—
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
201…251
317…361
150B
6P
NI, 6P
1
12 (305)
3…37
1
1
BP,NI, 6P
480
150
—
150, 150B
BP,NB,NI,6P
1
8 (203)
14 (356)
8 (203)
2.44 (62)
12.40 (315)
3.0 (76)
16 (406)
14 (356)
8 (203)
4.38 (111)
12.40 (315)
7.0 (178)
24 (610)
30 (762)
12 (305)
0.75 (19)
28.5 (724)
22.5 (572)
30 (762)
38 (965)
14 (356)
0.75 (19)
36.5 (927)
28.5 (724)
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
36 (914)
60 (1524)
14 (356)
0.75 (19)
58.5 (1486)
34.5 (876)
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
36 (914)
60 (1524)
14 (356)
0.75 (19)
58.5 (1486)
34.5 (876)
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-157
Bulletin 150
SMC™-3 Smart Motor Controllers
Approximate Dimensions
0
Controller
Rating [A]
43
60
85
2
108
135
3
201
251
4
5
8
Dimensions in inches (mm)
A (Width)
B (Height)
C (Depth)
D (Mtg. Dim.) E (Mtg. Dim.) F (Mtg. Dim.)
Any
1
16 (406)
14 (356)
8 (203)
4.38 (111)
12.40 (315)
152H
Any
1
16 (406)
14 (356)
8 (203)
4.38 (111)
12.40 (315)
7.0 (178)
153H
Any
1
16 (406)
24 (610)
10 (254)
0.75 (19)
22.5 (572)
14.5 (368)
152H, 153H
Any
1
16 (406)
24 (610)
9 (229)
0.75 (19)
22.5 (572)
14.5 (368)
152H
Any
1
24 (610)
30 (762)
12 (305)
0.75 (19)
28.5 (724)
22.5 (572)
Any
11
16 (406)
24 (610)
9 (229)
0.75 (19)
22.5 (572)
14.5 (368)
Any
1
24 (610)
30 (762)
12 (305)
0.75 (19)
28.5 (724)
22.5 (572)
153H
Any
1
16 (406)
24 (610)
9 (229)
0.75 (19)
22.5 (572)
14.5 (368)
152H,153H
Any
1
30 (762)
38 (965)
14 (356)
0.75 (19)
36.5 (927)
28.5 (724)
152H
361
152B,153B
Any
1
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
Any
1
30 (762)
38 (965)
14 (356)
0.75 (19)
36.5 (927)
28.5 (724)
152B,153B
Any
1
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
152H,153H
—
1
30 (762)
38 (965)
14 (356)
0.75 (19)
36.5 (927)
28.5 (724)
152B,153B, 152H,153H
Any
1
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
152H,153H
—
1
30 (762)
38 (965)
14 (356)
0.75 (19)
36.5 (927)
28.5 (724)
152B,153B, 152H,153H
Any
1
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
—
1
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
BP,NB
1
36 (914)
60 (1524)
14 (356)
0.75 (19)
58.5 (1486)
34.5 (876)
153B
—
1
36 (914)
60 (1524)
14 (356)
0.75 (19)
58.5 (1486)
34.5 (876)
152B,152H
—
2
38 (965)
60 (1524)
17 (431)
33.88 (861)
1.75 (45)
61.69 (1567)
152H
BP
2
38 (965)
60 (1524)
17 (431)
33.88 (861)
1.75 (45)
61.69 (1567)
152B,152H,153B,153H
NB,NI
3
40 (1016)
84 (2134)
18 (457)
—
—
—
—
1
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
34.5 (876)
BP,NB
1
36 (914)
60 (1524)
14 (356)
0.75 (19)
58.5 (1486)
153B
—
1
36 (914)
60 (1524)
14 (356)
0.75 (19)
58.5 (1486)
34.5 (876)
152B,152H
—
2
38 (965)
60 (1524)
17 (431)
33.88 (861)
1.75 (45)
61.69 (1567)
152H
BP
2
38 (965)
60 (1524)
17 (431)
33.88 (861)
1.75 (45)
61.69 (1567)
152B,152H,153B,153H
NB,NI
3
40 (1016)
84 (2134)
18 (457)
—
—
—
—
1
36 (914)
51 (1295)
14 (356)
0.75 (19)
49.5 (1257)
34.5 (876)
153H
480
BP
3§
40 (1016)
84 (2134)
18 (457)
—
—
—
152H,153B
Any
3
40 (1016)
84 (2134)
18 (457)
—
—
—
152H
—
4§
20 (508)
91.5 (2324)
20 (508)
—
—
—
152B, 152H
BP,NB
4§
35 (889)
91.5 (2324)
20 (508)
—
—
—
1 Rating 20 Hp @208V, 25 Hp @240V, 50 Hp @ 480V, 60 Hp @ 600V
Rating 25 Hp @208V, 30 Hp @240V, 60 Hp @ 480V, 75 Hp @ 600V
§ 200 Hp @ 240V AC, 400 Hp @480V, 500 Hp @ 600V
9
10
11
12
13
www.ab.com/catalogs
4-158
7.0 (178)
152H,153H
153H
7
Dimension
Figure No.
152H,153H
153H
317
6
With Option
SMC-3 Combination Controller
3…37
1
Bulletin
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™
Dialog Plus Smart Motor Controllers
Product Overview/Features
Bulletin 150 — SMC™ Dialog Plus Smart Motor Controller
The SMC™ Dialog Plus controller provides microprocessor controlled
starting for standard three-phase squirrel-cage induction motors. Four
standard modes of operation are available within a single controller:
Soft Start with Selectable Kickstart
Current Limit Start with Selectable Kickstart
Options include:
− Soft Stop
− Pump Control
− Preset Slow Speed
Dual Ramp Start
Full Voltage Start
− SMB Smart Motor Braking
− Accu-Stop
− Slow Speed with Braking
Table of Contents
Features......................... this page
Cat. No. Explanation 4-161
Product Selection ...... 4-162
Options .......................... 4-162
Accessories.................. 4-163
Specifications.............. 4-165
Approx. Dimensions . 4-168
1
2
Features include:
Built-in electronic motor overload protection Metering
SCANport communication
Three programmable auxiliary contacts
0
Keypad programming
LCD display
3
The SMC™ Dialog Plus controller is available for motors rated
1…1000 A; 200…480V AC, or 200…600V AC, 50 and 60 Hz. In
addition to motors, the SMC Dialog Plus™ controller can be used to
control resistive loads.
4
Standards Compliance
Certifications
UL 508
CSA C22.2 No.14
EN/IEC 60947-1
EN/IEC 60947-4-2
cULus Listed (Open Type) (File No. E96956, Guides NMFT, NMFT7)
CSA Certified (File No. LR 1234)
CE Marked (Open Type) per EMC and Low Voltage Directive
CCC Certified
5
Description of Features
Electronic Motor Overload Protection
The SMC Dialog Plus controller incorporates, as standard, electronic
motor overload protection. This overload protection is accomplished
electronically with an I2t algorithm.
When coordinated with the proper short circuit protection, overload
protection is intended to protect the motor, motor controller, and
power wiring against overheating caused by excessive overcurrent.
The SMC Dialog Plus controller meets applicable requirements as a
motor overload protective device.
The controller’s overload protection is programmable, providing the
user with flexibility. The overload trip class can be selected for class
10, 15, 20, or 30 protection. The trip current is programmed by
entering the motor full-load current rating.
Thermal memory is included to accurately model motor operating
temperature. Ambient insensitivity is inherent in the electronic
design of the overload.
Note: The current sensing capability of the SMC Dialog Plus
controller is disabled during bypass operation. The Bulletin 825
Converter Module and 150-NFS fanning strip are required for
providing current feedback in these applications. Note: To achieve
calibration, 70% motor load or greater is required at the motor shaft
for 2 s. Calibration is required when a Bulletin 825 Converter Module
is not used.
Stall Protection and Jam Detection
Motors can experience locked rotor currents and develop high
torque levels in the event of a stall or a jam. These conditions can
result in winding insulation breakdown or mechanical damage to the
connected load. The SMC Dialog Plus controller provides both stall
protection and jam detection for enhanced motor and system
protection. Stall protection allows the user to program a maximum
stall protection delay time from 0…10 s. The stall protection delay
time is in addition to the programmed start time and begins only
after the start time has timed out. If the controller senses that the
motor is stalled, it will shut down after the delay period has expired.
Jam detection allows the user to determine the motor jam detection
level as a percentage of the motor’s full load current rating. To
prevent nuisance tripping, a jam detection delay time, from
0.0…10.0 s, can be programmed. This allows the user to select the
time delay required before the SMC Dialog Plus controller will trip on
a motor jam condition. The motor current must remain above the
jam detection level during the delay time. Jam detection is active
only after the motor has reached full speed.
www.ab.com/catalogs
Energy Saver
This is a standard feature with the SMC Dialog Plus controller. It is
used to save energy on applications where the motor is lightly
loaded or unloaded for long periods of time. The Energy Saver is a
built-in feature of the controller. It does not require additional panel
space or external wiring. It also does not require a complicated
setup procedure.
Phase Rebalance
The SMC Dialog Plus controller incorporates, as standard, a
dynamic Phase Rebalance feature. The controller compensates for
voltage unbalance by automatically adjusting the voltage output to
balance the 3-phase currents drawn by the motor. When phase
rebalance is achieved, motor life may be extended and production
can continue without interruption. Phase Rebalance is a built-in
feature of the controller and does not require a complicated setup
procedure.
Note: Phase Rebalance requires the use of the Bulletin 825
Converter Module and the Cat. No. 150-NFS fanning strip.
Note: The performance of the Phase Rebalance feature is
dependent on the motor’s loading and characteristics. Severe
imbalances cannot be corrected.
Underload Protection
Utilizing the underload protection of the SMC Dialog Plus controller,
motor operation can be halted if a drop in current is sensed.
The SMC Dialog Plus controller provides an adjustable underload
trip setting from 0…99% of the programmed motor full load current
rating with an adjustable trip delay time of 0…99 s.
Undervoltage Protection
The SMC Dialog Plus controller’s undervoltage protection will halt
motor operation if a drop in the incoming line voltage is detected.
The undervoltage trip level is adjustable as a percentage of the
programmed line voltage, from 0…99%. To eliminate nuisance trips,
a programmable undervoltage trip delay time of 0…99 s can also be
programmed. The line voltage must remain below the undervoltage
trip level during the programmed delay time.
7
8
9
10
11
12
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
6
4-159
Bulletin 150
SMC™ Dialog Plus Smart Motor Controllers
Description of Features
0
1
2
3
4
5
6
7
Overvoltage Protection
If a rise in the incoming line voltage is detected, the SMC Dialog
Plus controller’s overvoltage protection will halt motor operation.
The overvoltage trip level is adjustable as a percentage of the
programmed line voltage, from 0…99%. To eliminate nuisance trips,
a programmable overvoltage trip delay time of 0…99 s can also be
programmed. The line voltage must remain above the overvoltage
trip level during the programmed delay time.
Voltage Unbalance Protection
Voltage unbalance is detected by monitoring the 3-phase supply
voltage magnitudes in conjunction with the rotational relationship of
the three phases. The controller will halt motor operation when the
calculated voltage unbalance reaches the user-programmed trip
level.
The voltage unbalance trip level is programmable from 0…25%
unbalance.
Excessive Starts Per Hour
The SMC Dialog Plus controller allows the user to program the
allowed number of starts per hour (up to 99). This helps eliminate
motor stress caused by repeated starting during a short time period.
Metering
Power monitoring parameters include:
3-phase current
Power factor
3-phase voltage
Motor thermal capacity usage
Power in kW
Elapsed time
Power usage in kWH
Built-in SCANport™ Communication
A serial interface port is provided as standard, which allows
connection to a Bulletin 1201 Human Interface Module or a variety
of Bulletin 1203 Communication Modules. This includes AllenBradley Remote I/O, DeviceNet network and RS-232/422/485-DF1.
LCD Display
The SMC Dialog Plus controller’s two-line 16-character backlit LCD
display provides parameter identification using clear, informative
text. Controller set up can be performed quickly and easily without
the use of a reference manual. Parameters are arranged in an
organized four-level menu structure for ease of programming and
fast access to parameters.
Keypad Programming
Programming of parameters is accomplished through a five-button
keypad on the front of the SMC Dialog Plus controller. The five
buttons include up and down arrows, an Enter button, a Select
button, and an Escape button. The user needs only to enter the
correct sequence of keystrokes for programming the SMC Dialog
Plus controller.
Auxiliary Contacts
Three hard contacts are furnished as standard with the SMC Dialog
Plus controller. The first two contacts are programmable for
Normal/Up-to-speed. The third is programmable for Normal/Fault.
Note: The motor thermal capacity usage allows the user to monitor
the amount of overload thermal capacity usage before the SMC
Dialog Plus controller’s built-in electronic overload trips.
Note: In bypass configurations, the current sensing and power
factor measurement capability of the SMC Dialog Plus controller is
disabled. Three-phase current measurement, kW, kWH, and motor
thermal capacity usage can still be maintained with the use of the
Bulletin 825 Converter Module.
Note: The usage of an SMC Controller on a generator and line
power requires the use of a Bulletin 825 Converter Module.
8
9
10
11
12
13
www.ab.com/catalogs
4-160
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™
Dialog Plus Smart Motor Controllers
Catalog Number Explanation
Open Controllers
150 – B180
a
Code
b
N
B
D
c
d
e
A – 8L
f
0
g
a
c
f
Bulletin Number
Enclosure Type
Description
Control Options (see page 4-162 for a full
listing.)
Open
Note: Select Only One
Description
Code
150
Solid-State Controller
150B
152H
153H
N
Solid-State Controller and Isolation
Contactor (enclosed only)
Code
b
Controller Ratings
Code
Description
B24
24 A, 1…15 Hp @ 460V AC
Description
d
Blank
Standard
Input Line Voltage
A
Soft Stop
Open Type
B
Pump Control
2
Code
Description
C
Preset Slow Speed
B
200…460V AC, 3-phase, 50 and 60 Hz
D
SMB Smart Motor Braking
C
200…575V AC, 3-phase, 50 and 60 Hz
E
Accu-Stop
F
Slow Speed with Braking
B35
35 A, 1…25 Hp @ 460V AC
B54
54 A, 1…40 Hp @ 460V AC
g
B97
97 A, 5…75 Hp @ 460V AC
Options
B135
135 A, 5…100 Hp @ 460V AC
Code
Description
B180
180 A, 5…150 Hp @ 460V AC
8L
Line-Mounted Protective Module
B240
240 A, 5…200 Hp @ 460V AC
8M
Load-Mounted Protective Module
B360
360 A, 5…300 Hp @ 460V AC
B500
500 A, 4…400 Hp @ 460V AC
8B
Line- and Load-Mounted Protective
Modules
B650
650 A, 5…500 Hp @ 460V AC
B720
720 A, 5…600 Hp @ 460V AC
B850
850 A, 10…700 Hp @ 460V AC
B1000
1000 A, 10…800 Hp @ 460V AC
1
3
4
5
6
For enclosed products, visit www.ab.com/catalogs.
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-161
Bulletin 150
SMC™ Dialog Plus Smart Motor Controllers
Product Selection/Options
0
Open Type Controllers
Up to 460V AC
kW
Current1
Rating [A]
230V AC
50 Hz
3
4
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
100…240V AC
50/60 Hz Control
Cat. No.
24V AC/DC Control
Cat. No.
24
5.5
11
1…5
1…7.5
1…15
150-B24NBD
150-B24NBR
35
10
18.5
1…10
1…10
1…25
150-B35NBD
150-B35NBR
54
15
22
1…15
1…20
1…40
150-B54NBD
97
25
45
5…30
5…30
5…75
150-B97NBD
§
150-B97NBR
135
37
75
5…40
5…50
5…100
150-B135NBD
§
150-B135NBR
180
51
90
5…60
5…60
5…150
150-B180NBD
§
150-B180NBR
240
75
132
5…75
5…75
5…200
150-B240NBD
§
150-B240NBR
360
110
200
5…125
5…150
5…300
150-B360NBD
§
150-B360NBR
500
150
257
5…150
5…200
5…400
150-B500NBD
§
150-B500NBR
650
200
355
5…200
5…250
5…500
150-B650NBD
§
150-B650NBR
720
220
400
5…250
5…300
5…600
150-B720NBD
§
150-B720NBR
850
257
475
10…300
10…350
10…700
150-B850NBD
§
150-B850NBR
1000
315
530
10…350
10…400
10…800
150-B1000NBD
§
150-B1000NBR
1
2
Hp‡
400V AC
50 Hz
150-B54NBR
1 Controllers rated 97…360 A are not equipped with line and load terminal lugs. See [T-2097386] for terminal lug kits.
The minimum rating is: 0.7 kW for devices with current ratings of 54 A or less; 4 kW for devices rated 97…720 A; 7.5 kW for devices rated 850 A and greater.
‡ Hp ratings at motor terminal voltages for 208, 480, and 600 line volts, respectively.
§ 120V AC control is required for heatsink fan operation.
Up to 575V AC
5
6
7
8
kW
Hp‡
200V AC
60 Hz
230V AC
60 Hz
460V AC
60 Hz
575V AC
60 Hz
100…240V AC
50/60 Hz Control
Cat. No.
24V AC/DC Control
Cat. No.
15
1…5
1…7.5
1…15
1…20
150-B24NCD
150-B24NCR
22
1…10
1…10
1…25
1…30
150-B35NCD
150-B35NCR
22
37
1…15
1…20
1…40
1…50
150-B54NCD
25
45
63
5…30
5…30
5…75
5…75
150-B97NCD
§
150-B97NCR
135
37
75
90
5…40
5…50
5…100
5…125
150-B135NCD
§
150-B135NCR
180
51
90
132
5…60
5…60
5…150
5…150
150-B180NCD
§
150-B180NCR
240
75
132
160
5…75
5…75
5…200
5…250
150-B240NCD
§
150-B240NCR
360
110
200
250
5…125
5…150
5…300
5…350
150-B360NCD
§
150-B360NCR
500
150
257
355
5…150
5…200
5…400
5…500
150-B500NCD
§
150-B500NCR
650
200
355
475
5…200
5…250
5…500
5…600
150-B650NCD
§
150-B650NCR
720
220
400
500
5…250
5…300
5…600
5…700
150-B720NCD
§
150-B720NCR
850
257
475
600
10…300
10…350
10…700
10…800
150-B850NCD
§
150-B850NCR
1000
315
530
710
10…350
10…400
10…800
10…1000
150-B1000NCD
§
150-B1000NCR
Current1
Rating [A]
230V AC
50 Hz
24
35
400V AC
50 Hz
500V AC
50 Hz
5.5
11
10
18.5
54
15
97
150-B54NCR
1 Controllers rated 97…360 A are not equipped with line and load terminal lugs. See [T-2097386] for terminal lug kits.
9
The minimum rating is: 0.7 kW for devices with current ratings of 54 A or less; 4 kW for devices rated 97…720 A; 7.5 kW for devices rated 850 A and greater.
‡ Hp ratings at motor terminal voltages for 208, 480, and 600 line volts, respectively.
§ 120V AC control is required for heatsink fan operation.
Open Type Options (only one selection allowed)
10
11
12
13
Option
Description
Cat. No.
Modification
Soft Stop
Provides a ramp down time of 0…60 s for applications which require an extended coast-to-rest.
A§
Pump
Control
Provides smooth motor acceleration and deceleration, reducing surges caused by the starting and stopping of centrifugal pumps.
Starting time is adjustable from 0…30 s, and stopping time is adjustable from 0…120 s.
B§
Preset Slow
Speed
Provides preset slow speeds for positioning or alignment applications. Preset speeds can be selected at either 7% or 15% of rated
motor speed, with adjustable slow speed current from 0…450% of full-load motor current.
C§
SMB Smart
Motor
Braking
Provides a microprocessor-based braking system that applies 3-phase braking current to a standard squirrel-cage induction motor.
The strength of the braking current is adjustable from 0…400% of the motor’s full-load current rating.
D§
Accu-Stop
Provides stopping control for general positioning or to minimize jogging to stop. A 3-phase braking current is applied to the motor
(adjustable from 0…400% of full-load current) until it reaches a preset slow speed (either 7% or 15% of rated motor speed). The
motor is held at this speed until a stop command is given. Braking torque is then applied until the motor reaches zero speed. Slow
speed current is adjustable from 0…450% of full-load current.
E§
Slow Speed
with Braking
Provides a preset slow speed for positioning or alignment applications. Preset speeds can be selected at either 7% or 15% of
rated motor speed, with adjustable slow speed current from 0…450% of full-load current.
Provides a microprocessor-based braking system that applies 3-phase braking current to a standard squirrel-cage induction motor.
The strength of the braking current is adjustable from 0…400% of full-load motor current.
F§
§ Add the designated letter to the end of the cat. no. Example: To add the Pump Control option: Cat. No. 150-B24NBDB.
www.ab.com/catalogs
4-162
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™
Dialog Plus Smart Motor Controllers
Accessories
Protective Modules1♣
Description
Field Modification
Cat. No.
480 V Protective Module (Field Installed)
150-N84
Current Rating [A]
0
1
24…54
600 V Protective Module (Field Installed)
150-N86
2
480 V Protective Module (Field Installed)
150-N84L
97…360
3
600 V Protective Module (Field Installed)
150-N86L
1 The same protective module mounts on the line or load side of the SMC Dialog Plus Controller. For applications requiring both line and load side protection,
two protective modules must be ordered.
♣ Surge protection is provided as standard on 500…1000 A units
4
Terminal Lug Kits (97…1000 A)
Total No. of
Terminal Lugs
Possible Each Side
Current Rating [A]
Wire Size
97…135
Line Side
Load Side
3
3
5
Pkg.
Quantity
#6…250 MCM AWG
16 mm2…120 mm2
180…360
500‡
199-LF1
6
6
6
6
850…1000‡
(2) 1/0…500 MCM AWG
50 mm2…240 mm2
6
7
3
#4…500 MCM AWG
25 mm2…240 mm2
650…720‡
Cat. No.
199-LG1
9
9
6
6
199-LJ1
8
‡ Lugs are supplied with SMC.
9
IEC Terminal Covers
Description
Field Modification
Cat. No.
IEC line- or load-side terminal covers for 97…135 A devices
(includes line and load termination covers)
150-NT1
IEC line- or load-side terminal covers for 180…360 A devices
(includes line and load termination covers)
150-NT2
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-163
Bulletin 150
SMC™ Dialog Plus Smart Motor Controllers
Accessories
Description
Degree of Protection
Cat. No.
Door Mount Bezel Kit
IP30 (Type 1)
1201-DMA
Programmer Only
IP30 (Type 1)
1201-HAP
Programmer Only
IP65 (Type 4/12) with
Bezel
1201-HJP
Analog Control Panel
IP30 (Type 1)
1201-HA1
Digital Control Panel
IP30 (Type 1)
1201-HA2
Digital Control Panel
IP65 (Type 4/12) with
Bezel
1201-HJ2
0
1
Cat. No. 1201-HAP
2
Human Interface Module
Cat. No. 1201-HA1
3
4
Cat. No. 1201-HA2
Description
For Use With
0.3 m
5
1m
Communication
Cable
Male-Male
Communication Cable
Cat. No. 1202-C10
6
3m
Human Interface
Module and
Communication
Modules
9m
Communication
Module
Communication Module
Cat. No. 1203-GD1
ControlNet
1202-C10
1202-C30
1202-C90
RS-232/RS-422/RS-485/DF1, or DH485 (Series B)
7
Cat. No.
1202-C03
1203-GD2
Bulletin 150 SMC
Dialog Plus
Enhanced DeviceNet
1203-CN1
1203-GU6
8
Flex I/O SCANport Module♣
Flex I/O Terminal Base
9
Cat. No. 1203-FM1
Cat No. 1203-SM1
Communication Option Kits
10
1203-FB1
Bulletin 150 SMC
Dialog Plus
Flex I/O Module®
1203-FM1
SLC Communication Module
1203-SM1
Start, Stop, and Jog buttons are the only active controls when used with the SMC Dialog Plus Controller.
Requires Type 1 Door Mount Bezel Kit.
Separately powered 120/240V AC.
♣ Each Flex I/O SCANport Module requires (1) Cat. No. 1203-FB1 and (1) Cat. No. 1203-FM1.
® Requires a Communication Option Cable (Cat. No. 1202-C03/C10/C30/C90) to be functional. These units are not acceptable for NEMA Type 4 door mounting
or UL Type 4X outdoor only.
11
12
13
www.ab.com/catalogs
4-164
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™
Dialog Plus Smart Motor Controllers
Accessories/Specifications
Converter Modules1
Motor Full Load
Current Range [A]
Cat. No.
2.5…20 A
825-MCM20
9…100 A
825-MCM180
Cat. No. 825-MCM180
0
1
2
64…360 A
825-MCM630
3
Cat. No. 825-MCM630
Connection Cable (Replacement)
Bul. 825-P to Bul. 825-MCM connection
825-MCA
Description
Fanning Strip for Bulletin 825 Converter Modules
Cat. No.
4
150-NFS
5
Cat. No. 150-NFS
M8 connections
Set of three
4 x 16 x 102 mm (1/8 x 5/8 x 4-1/64 in.) (125 A max.)
Universally applicable
Weight: 230 g
6
825-MVM
1 Must be used with fanning strip Cat. No. 150-NFS.
7
Specifications
Functional Design Specifications
Installation
Power Wiring
The SMC Dialog Plus Controller can be wired with or without an isolation contactor. Bypass contactors can
be employed after the controller has brought the motor to full speed.
8
Control Wiring 2- and 3-wire control for a wide variety of applications.
Setup
Standard Features
Optional Features
Keypad
The SMC Dialog Plus Controller is configured with the front keypad and backlit LCD display.
Software
Parameter values can be downloaded to the SMC Dialog Plus Controller with DriveTools programming
software and the Cat. No. 1203-GD2 communication module.
Communications
One serial port provided for connection to optional human interface and communication modules.
Starting Modes
Soft start with selectable kickstart, current limit, dual ramp, and full voltage in one unit.
Protection and Diagnostics
Power loss, line fault, voltage unbalance, excessive starts/hour, phase reversal, undervoltage, overvoltage,
controller temp, stall, jam, open gate, overload, underload, communication fault.
Metering
Amps, volts, kW, kWH, elapsed time, power factor, motor thermal capacity usage.
Status Indication
Stopped, ramping, stopping, at speed, and fault.
Auxiliary Contacts
(1) Single-pole double-throw contact programmable as normal or up-to-speed; one programmable as
normal or fault.
Soft Stop
Extended coast-to-rest to minimize load shifting. Ramp down time is adjustable from 0…60 s.
Pump Control
Helps reduce fluid surges in centrifugal pumping systems during starting and stopping period. Starting time
is adjustable from 0…30 s. Stopping time is adjustable from 0…120 s.
Preset Slow Speed
Enables the operator to position material. The preset slow speed can be set for low (7% of base speed),
high (15% of base speed), reverse low (10% of base speed) or reverse high (20% of base speed).
SMB Smart Motor Braking
Provides motor braking without additional equipment for applications that require the motor to stop quickly.
Braking current is adjustable from 0…400% of the motor’s full-load current rating.
Accu-Stop/Slow Speed with
Braking
Combines Smart Motor Braking and Preset Slow Speed. Braking current is adjustable from 0…400% of
full-load current. Slow speed can be set for either Low (7% of base speed) or High (15% of base speed).
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-165
Bulletin 150
SMC™ Dialog Plus Smart Motor Controllers
Specifications
Electrical Ratings
0
1
UL/CSA/NEMA
IEC
Rated Operation Voltage
200…480V AC
200…600V AC (–15%, +10%)
200…415V
200…500V
Rated Insulation Voltage
N/A
500V
Rated Impulse Voltage
N/A
6000V
Dielectric Withstand
Repetitive Peak Inverse Voltage Rating
Power Circuit
Operating Frequency
Utilization Category
2
Protection Against Electrical Shock
2200V AC
2500V
200…480V AC: 1400V
200…600V AC: 1600V
200…415V: 1400V
200…500V: 1600V
50/60 Hz
50/60 Hz
MG 1
AC-53a
N/A
IP00 (open device)
DV/DT Protection
RC Snubber Network
Metal Oxide Varistors:
220 Joules @ 24…360 A
220 Joules @ 480V, 500…1000 A
300 Joules @ 600V, 500…1000 A
Transient Protection
3
SCPD Performance
Type 1
SCPD List
Maximum Fuse or Circuit Breaker (A):
4
5
Short-Circuit
Protection
Device Operational Current Rating [A]
6
24
80
35
125
54
200
97
350
135
500
180
600
240
700
360
1000
500
1200
650
1600
720
2000
850
2500
1000
Rated Operational Voltage
7
Control Circuit
8
3000
100…240V AC
24V AC
24V DC
Rated Insulation Voltage
N/A
240V
Rated Impulse Voltage
N/A
3000V
Dielectric Withstand
1600V AC
2000V
Operating Frequency
50/60 Hz
50/60 Hz
Protection Against Electric Shock
N/A
Control Module
9
10
Power
Requirements
100…240V
24V
24V DC
Heatsink Fan(s) [A]1
11
IP20
40 VA
24
—
35
—
54
—
97
45 VA
135
45 VA
180
45 VA
240
45 VA
360
45 VA
500
145 VA
650
320 VA
720
320 VA
850
320 VA
1000
320 VA
1 For devices rated 24…500 A, heatsink fans can be powered by either 110/120V AC or 220/240V AC. For devices rated 650…1000 A, heatsink fans can only be
12
powered by 110/120V AC.
13
www.ab.com/catalogs
4-166
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 150
SMC™
Dialog Plus Smart Motor Controllers
Specifications
Electrical Ratings, Continued
UL/CSA/NEMA
Maximum Heat
Dissipation [W]
Current Rating [A]
110
35
150
54
200
97
285
135
490
180
660
240
935
360
1170
500
1400
650
2025
720
2250
850
2400
1000
2760
Rated Operation Voltage
Dielectric Withstand
Auxiliary
Contacts
1
2
240V AC
Rated Insulation Voltage
Operating Frequency
Utilization Category
3
240V
N/A
240V
1600V AC
2000V
50/60 Hz
50/60 Hz
B300 (terminals 18…19)
C300 (terminals 18…20)
C300 (terminals 29…30)
AC-15
SCPD Performance
0
IEC
24
4
Type 2
SCPD List
Class CC 8 A @ 1000 A Available Fault Current
Environmental
5
0…+50 °C (32…122 °F) (open)
0…+40 °C (32…104 °F) (enclosed)
Operating Temperature Range
Storage and Transportation Temperature Range
–20…+75 °C
6
2000 m (6560 ft)
Humidity
5…95% (non-condensing)
Pollution Degree
2
Mechanical
Resistance to
Vibration
Operational
Non-Operational
1.0 G Peak, 0.006 in. displacement
2.5 G, 0.015 in. displacement
Resistance to
Shock
Operational
Non-Operational
15 G
30 G
Power
Poles
Construction
Thermoset Moldings
Heatsink hockey puck thyristor
Control Modules
7
24…135 A
180…1000 A
8
Thermoset and Thermoplastic Moldings
Metal Parts
Anodized Aluminum, Plated Brass, Copper, or Painted Steel
Power
Terminals
Terminals
24…54 A
6.0 mm hole with clamp screw
97 and 135 A
One 11.5 mm (0.453 in.) diameter hole each
9
180…360 A
One 10.5 mm (0.413 in.) diameter hole each
500 A
Two 13.5 mm (0.531 in.) diameter holes each
650 and 720 A
Three 13.1 mm (0.515 in.) diameter holes each
850 and 1000 A
Six 13.1 mm (0.515 in.) diameter holes each
Power Terminal Markings
NEMA, CENELEC EN50 012
Control Terminals
M 3.5 x 0.6 Pozidriv screw with self-lifting clamp plate
10
Other
EMC Emission
Levels
Conducted Radio Frequency Emissions
Radiated Emissions
Class A
Class A
Electrostatic Discharge
EMC Immunity
Levels
Per IEC 947-4-2
Fast Transient
Per IEC 947-4-2
Surge Transient
Per IEC 947-4-2
Current Range
Overload
Characteristics
11
8 kV Air Discharge
Radio Frequency Electromagnetic Field
1.0…999.9 A
Trip Classes
12
10, 15, 20, and 30
Trip Current Rating
120% of Motor FLC
Number of Poles
3
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-167
Bulletin 150
SMC™ Dialog Plus Smart Motor Controllers
Specifications/Approximate Dimensions
0
Fuse Clip Sizing and Type for Fusible Combination
Controllers1
Horsepower @ 480V
Fuse Clip Size/Type
15
30 A/Class J
0…30
20
60 A/Class J
31…60
25
1
2
100 A/Class J
61…100
60
200 A/Class J
101…200
200 A/Class J
101…200
400 A/Class J
150
201…400
400 A/Class J
200
201…400
400 A/Class J
250
201…400
400 A/Class J
300
401…600
600 A/Class J
401…600
350
600 A/Class J
401…600
400
1200 A/Class L
601…1600
450
1200 A/Class L
500
601…1600
1200 A/Class L
600
5
101…200
200 A/Class J
125
4
61…100
50
100
3
31…60
100 A/Class J
75
Interrupting Rating in
Symmetrical Amps
@ 480V‡
15
150/50
14 000
20
150/50
14 000
25
150/60
14 000
30
150/70
14 000
40
150/100
14 000
50
150/125
14 000
60
250/150
25 000
75
250/175
25 000
100
250/225
25 000
125
250/250
25 000
150
400/300
35 000
200
400/400
35 000
250
600/500
35 000
300
600/600
35 000
350
800/800
35 000
400
800/800
50 000
450
1200/1000
50 000
500
1200/1200
50 000
600
1200/1200
50 000
700
2000/1600
65 000
800
2000/2000
65 000
Horsepower @ 480V
31…60
60 A/Class J
40
Circuit Breaker Size [A]/
Rating Plug Size [A]
Fuse Size Range [A]
60 A/Class J
30
Circuit Breaker Sizes and Rating Plug Sizes
601…1600
1200 A/Class L
601…1600
700
1200 A/Class L
601…1600
800
1200 A/Class L
601…1600
1 Consult NEC Handbook for proper fuse sizing guidelines.
Optional fuse clip sizes and types are available upon request. Consult your
local Rockwell Automation sales office or Allen-Bradley distributor.
‡ For higher interrupting ratings, consult your local Rockwell Automation
sales office or Allen-Bradley distributor.
6
Approximate Dimensions and Shipping Weights
Open Type Controllers
7
Dimensions are in millimeters (inches). Dimensions are not intended for manufacturing purposes.
Controller
Rating [A]
8
9
10
11
Height
Width
Depth
Weight
24
180
(7.09)
154
(6.06)
185
(7.29)
4.5 kg
(10 lbs)
35
240
(9.45)
214
(8.43)
195
(7.68)
6.8 kg
(15 lbs)
54
290
(11.42)
244
(9.61)
225
(8.86)
11.3 kg
(25 lbs)
97
336
(13.23)
248
(9.77)
256
(10.09)
10.4 kg
(23 lbs)
135
336
(13.23)
248
(9.77)
256
(10.09)
11.8 kg
(26 lbs)
180
560
(22.06)
273
(10.75)
294
(11.58)
25 kg
(55 lbs)
240
560
(22.06)
273
(10.75)
294
(11.58)
30 kg
(65 lbs)
360
560
(22.06)
273
(10.75)
294
(11.58)
30 kg
(65 lbs)
500
588
(23.17)
508
(20.00)
311
(12.23)
40.8 kg
(90 lbs)
650…1000
1524
(60.0)
813
(32.00)
402
(15.83)
167.8 kg
(370 lbs)
12
13
www.ab.com/catalogs
4-168
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Product Overview/Product Selection
Bulletin 156 — Solid-State Contactors
Table of Contents
The Bulletin 156 Solid-State Contactors are ideal replacements for
electro-mechanical contactors where fast and demanding switching of
loads such as heaters, solenoids, transformers, and motors, is
required.
Compact modular design complete with heatsink
Panel or DIN Rail mountable
Simple installation
Available in single-phase, dual-phase, or three-phase version
Operational current rating 20…90 A
LED status indication
AC, DC, and analog control options
2 back-to-back SCR switching elements per phase
Zero-cross switching
Integrated varistor for surge protection
Product Selection ...... this page
Specifications.............. 4-171
Approximate
Dimensions................... 4-188
Standards Compliance
UL 508
CSA C22.2, No.14
IEC 60947-4-2
Certifications
cULus Listed (File No. E96956,
Guides NMFT, NMFT7)
0
1
2
CE per IEC 60947-4-2/3
3
Single-Phase‡
Operational Voltage
24…230V AC
Hp Rating @ 40 °C (104 °F)
Current Rating [A]
20
30
45
50
70
75
90
Control Voltage
24…275V AC, 24…48V DC
5…24V DC
24…275V AC, 24…48V DC
5…24V DC
24…275V AC, 24…48V DC
5…24V DC
24…275V AC, 24…48V DC
5…24V DC
24…275V AC, 24…48V DC
5…24V DC
24…275V AC, 24…48V DC
5…24V DC
24…275V AC, 24…48V DC
5…24V DC
230V
1/6
1/2
1
2
1/2
1-1/2
3
5
1
2
5
7-1/2
1
2
5
7-1/2
1-1/2
3
5
10
1-1/2
1-1/2
3
3
42…600V AC
480V 600V
115V
5
5
10
10
Cat. No.
156-B20AA1
156-B20CA1
156-B20AB1
156-B20CB1
156-B30AA1
156-B30CA1
156-B30AB1
156-B30CB1
156-B45AA1
156-B45CA1
156-B45AB1
156-B45CB1
156-B50AA1
156-B50CA1
156-B50AB1
156-B50CB1
156-B70AA1
156-B70CA1
156-B70AB1
156-B70CB1
4
5
6
♣
156-B75AA1
♣
♣
156-B75AB1
♣
156-B75CB1
♣
156-B90AA1
♣
156-B90CA1
♣
156-B90AB1
♣
156-B90CB1
156-B75CA1
‡ Includes an integrated varistor for surge protection.
These Hp ratings only apply to units with operational voltage ranges of 42…600V AC.
♣ Includes an integrated fan in the heat sink assembly. Fan will automatically switch on when necessary (approximately 125 °C internal temp.). Includes
overtemperature protection. See page 4-189 for details.
7
8
Dual-Phase‡
Operational Voltage
24…230V AC
Hp Rating @ 40 °C (104 °F)
Current Rating [A]
25
32
Control Voltage
24…275V AC, 24…190V DC
5…24V DC
24…275V AC, 24…190V DC
5…24V DC
115V
230V
1
3
1
3
48…600V AC
480V 600V
5
7-1/2
Cat. No.
7-1/2
10
156-B25AA2
156-B25CA2
156-B25AB2
156-B25CB2
156-B32AA2
156-B32CA2
156-B32AB2
156-B32CB2
9
10
‡ Includes an integrated varistor for surge protection.
These Hp ratings only apply to units with operational voltage ranges of 48…600V AC.
Three-Phase
Operational Voltage
24…230V AC
Hp Rating @ 40 °C (104 °F)
Current Rating [A]
20
25
32
480V 600V
11
48…600V AC
Control Voltage
115V
230V
24…275V AC, 24…190V DC
1
3
5
7-1/2
156-B20AA3
156-B20CA3
5…24V DC
1
3
5
7-1/2
156-B20AB3
156-B20CB3
24…275V AC, 24…190V DC
1
3
7-1/2
10
156-B25AA3
156-B25CA3
5…24V DC
1
3
7-1/2
10
156-B25AB3
156-B25CB3
24…275V AC, 24…190V DC
1
3
7-1/2
10
♣
156-B32AA3
♣
156-B32CA3
5…24V DC
1
3
7-1/2
10
♣
156-B32AB3
♣
156-B32CB3
Cat. No.
12
These Hp ratings only apply to units with operational voltage ranges of 48…600V AC.
♣ Includes an integrated fan in the heat sink assembly. Fan will automatically switch on when necessary (approximately 125 °C internal temp.). Includes
overtemperature protection. See page 4-190 for details.
www.ab.com/catalogs
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-169
Bulletin 156
Solid-State Contactors
Product Selection
0
Solid-State Specialty Contactors
Single-Phase with Current Monitoring1
Operational Voltage
Current
Rating [A]
1
Supply
Voltage
Control
Voltage
30
24V DC
115V AC
230V AC
480V AC
600V AC
3/4
2
5
5
1
2
5
7-1/2
4…32V DC
50
2
24…265V AC
Rated Hp @ 40 °C (104 °F), 50/60 Hz
42…660V AC
Cat. No.
Alarm Type
PNP, N.O.
156-B30ABP
156-B30CBP
NPN, N.O.
156-B30ABN
156-B30CBN
PNP, N.O.
156-B50ABP
156-B50CBP
NPN, N.O.
156-B50ABN
156-B50CBN
These Hp ratings only apply to units with operational voltage ranges of 42…660V AC.
1 For current monitoring range, please see additional specifications on page 4-172 and monitoring Operations data on page 4-189.
Single-Phase, Single-Pole, Multi-function Analog§
Operational Voltage
3
90…265V AC
Current Rating [A]
30
50
4
Control Input
200…550V AC
410…660V AC
Cat. No.
0…10V DC‡
156-B30AV1
156-B30BV1
156-B30CV1
4…20 mA
156-B30AC1
156-B30BC1
156-B30CC1
0…10V DC‡
156-B50AV1
156-B50BV1
156-B50CV1
4…20 mA
156-B50AC1
156-B50BC1
156-B50CC1
§ See additional specifications, see page 4-173 and current monitoring data on page 4-193.
‡ Requires a 24V AC/DC supply to power the control circuitry of the solid-state contactor. See wiring diagrams on page 4-175 for additional details.
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-170
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Specifications
Specifications
0
General
Single-Phase and Single-Phase
with Current Monitoring
Nominal Voltage Rating
Operational Voltage Range
Blocking Voltage
Dual- and Three-Phase
Single-Phase with Analog Control
230V AC
400/480/600V AC
230V AC
400/480
/600V
AC
230V AC
400/480V AC
600V AC
24…265V AC
42…660V AC
24…280V AC
48…660
V AC
90…265V AC
200…550V AC
410…660V AC
650Vp
1200Vp
650Vp
1200Vp
650Vp
1200Vp
1200Vp
≥ 0.9 @ 230V AC
rms
≥ 0.9 @ 480V
AC rms
≥ 0.9 @ 600V
AC rms
Operational frequency
1
45…65 Hz
≥ 0.5 @ 230V
AC rms
Power Factor Minimum
≥ 0.5 @ 600V AC
rms
≥ 0.5 @
600V
AC rms
≥ 0.5 @ 230V
AC rms
Rated Insulation Voltage —
Input to output, output to case
4000V AC rms
Relay ON Indication
Green LED, ON when control input is detected
Red LED, on when the solid-state contactor (SSC) temperature switching element (SCR) temperature is exceeded. SSC
output (load) will switch OFF (Green LED: OFF). When overtemperature condition is removed, red LED will go OFF and
normal operation will continue on the control input cycle.
Overtemp Alarm ON Indication1
Overtemp Alarm1
2
I max.
50 mA DC
50 mA DC
50 mA DC
50 mA
DC
⎯
⎯
⎯
U max.
50V DC
50V DC
50V DC
50V DC
⎯
⎯
⎯
Standards Compliance
3
4
cULus
Environmental
Operating Temperature
-30…+70 °C (-22…+158 °F)
Storage Temperature
-40…+100 °C (-40…+212 °F)
RoHS Compliance
5
Yes
Vibration
6 G (per EN50155)
Pollution Degree
2
6
Mechanical
Housing Material
PBT, Flame Retardent
Heat Sink Material
Black Anodized Aluminum
Din Rail Mount Base
Electroplated Steel
Mounting
Vertical
Approximate Weight
22.5 mm
0.225 kg (0.5 lb)
45 mm
0.43 kg (0.95 lb)
45 mm with
Integrated Fan
0.46 kg (1.0 lb)
90 mm
0.75 kg (1.65 lb)
90 mm with
Integrated Fan
0.78 kg (1.72 lb)
Contactor Type
7
8
Single Phase
Package Size
Screw Type
Dual- and Three-phase
22.5 mm
45 and 90 mm
M4
M3
45 and 90 mm
M3
9
min wire size
1 x 0.5 mm2 (1 x 20 AWG)
1 x 0.5 mm2 (1 x 20 AWG)
(one wire min. & max.)
1 x 0.5 mm2 (1 x 20 AWG)…1 x 4.0 mm2 (1 x 12
AWG)
max wire size
2 x 2.5 mm2 (2 x 14 AWG)
1 x 4.0 mm2 (1 x 12 AWG)
or 2 x 2.5 mm2 (2 x 1 4
AWG)
(two wire min. & max.)
2 x 0.5 mm2 (2 x 20 AWG)…2 x 2.5 mm2 (2 x 1 4
AWG)
Control Terminals
max torque
bit type
Screw Type
2 N•m
0.6 N•m
0.6 N•m
posidrive 1 bit
posidrive 0 bit
posidrive 0 bit
M4
M5
M3
min wire size
1 x 0.5 mm2 (1 x 20 AWG)
1 x 4.0 mm2 (1 x 12 AWG)
(one wire min. & max.)
1 x 0.5 mm2 (1 x 20 AWG)…1 x 4.0 mm2 (1 x 12
AWG)
max wire size
2 x 2.5 mm2 (2 x 14 AWG)
1 x 25 mm2 (1 x 3 AWG)
or 2 x 10 mm2 (2 x 6
AWG)
(two wire min. & max.)
2 x 0.5 mm2 (2 x 20 AWG)…2 x 2.5 mm2 (2 x 14
AWG)
2 N•m
2.5 N•m
0.6 N•m
posidrive 1 bit
posidrive 2 bit
posidrive 0 bit
Power Terminals
max torque
bit type
10
11
12
1 Alarm capability exists on 1-phase 75 and 90 A, 5…24V DC control and 3-phase 32 A, 5…24V DC control units.
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-171
Bulletin 156
Solid-State Contactors
Specifications
Control Input
Single-Phase, Single-Phase with Current Monitoring, and
Single-Phase with Analog Control
0
Control voltage range (±10%)
1
Dual- and Three-Phase
DC
AC/DC
DC
AC/DC
Control Voltage Range
4…32V
24…275V AC/24…48V DC
5…32V DC
24…275V AC/24…190V DC
Pick Up Voltage
3.8V DC
22V AC/DC
4.7V DC
22V AC/DC
Reverse Voltage
32V DC
32V DC
Drop Out Voltage
1.2V DC
⎯
6V AC/DC
1.2V DC
⎯
6V AC/DC
12 mA
17 mA
24 mA
15 mA
1/2 Cycle
1 Cycle
1 Cycle
1 Cycle
Maximum Input Current
Maximum Response Time Pick
Up and Drop Out
2
Power Output
Rated
Operational
Current®
Max. OffState Leakage
Max.
NonCurrent @
Repetitive
Repetitive
Rated Voltage
Overload Surge Current
and
Housing AC51 AC53a
Current
(ACrms)
Frequency
Min. Oper. (ACrms)
Size
@
@
Tj = 25 °C
Tj = 25 °C
Current
[mm]
25 °C 25 °C
t=1s
t = 10 ms
t = 10 ms
3
22.5
20 A
5A
350 mA
35 A
300 A
3 mA
450 A2s
20 A
1.6 Vrms
500 V/uS
22.5
30 A
15 A
250 mA
125 A
600 A
3 mA
1800 A2s
40 A
1.6 Vrms
500 V/uS
156-B45…1
45
45 A
20 A
400 mA
150 A
1150 A
3 mA
6600 A2s
60 A
1.6 Vrms
500 V/uS
156-B50…1
45
50 A
30 A
500 mA
200 A
1900 A
3 mA
18000 A2s
90 A
1.6 Vrms
500 V/uS
Single-Phase 156-B70…1
90
70 A
30 A
500 mA
200 A
1900 A
3 mA
18000 A2s
90 A
1.6 Vrms
500 V/uS
156-B75…1
45 with
fan♣
75 A
30 A
500 mA
200 A
1900 A
3 mA
18000 A2s
90 A
1.6 Vrms
500 V/uS
156-B90…1
90 with
fan♣
90 A
30 A
500 mA
200 A
1900 A
3 mA
18000 A2s
90 A
1.6 Vrms
500 V/uS
156-B25…2
45
25 A
15 A
250 mA
125 A
600 A
3 mA
1800 A2s
40 A
1.6 Vrms
500 V/uS
156-B32…2
90
32 A
15 A
250 mA
125 A
600 A
3 mA
1800 A2s
40 A
1.6 Vrms
500 V/uS
156-B20…3
45
20 A
15 A
250 mA
125 A
600 A
3 mA
1800 A2s
40 A
1.6 Vrms
500 V/uS
156-B25…3
90
25 A
15 A
250 mA
125 A
600 A
3 mA
1800 A2s
40 A
1.6 Vrms
500 V/uS
A2s
Dual-Phase
Three-Phase
8
9
156-B32…3
45 with
fan♣
32 A
15 A
250 mA
125 A
600 A
3 mA
1800
40 A
1.6 Vrms
500 V/uS
Single-Phase
with Current
Monitoring
156-B30…
45
30 A
15 A
150 mA
125 A
600 A
5 mA
1800 A2s
40 A
1.6 Vrms
1000 V/uS
156-B50…
45
50 A
30 A
500 mA
200 A
1900 A
5 mA
18000 A2s
90 A
1.6 Vrms
1000 V/uS
Single-Phase
with Analog
Control
156-B30…
45
30 A
⎯
150 mA
55 A
325 A
3 mA
525 A2s
30 A
1.6 Vrms
1000 V/uS
50 A
⎯
90 A
1.6 Vrms
1000 V/uS
156-B50…
45
500 mA
200 A
1900 A
3 mA
18000
A2s
AC51 indicates a resistive load. For details, refer to IEC 60947-4-3. AC53a indicates an inductive (motor) load. For details, refer to IEC 60947-4-2.
§ To potentially protect the solid-state contactor from a short-circuit condition, select a semiconductor fuse with an I2T value less than the one indicated below
for the SSC.
‡ Provides Type 1 protection using a Class J or CC fuse.
♣ Includes an integrated fan in the heat sink assembly. Fan will automatically switch on when necessary (approximately 125 °C internal temp.). DC control
Includes overtemperature alarm cutout.
® Current per each phase.
Power Dissipation
10
Single-Phase
11
12
Critical
dV/dT
Off-State
156-B30…1
5
7
I2t for
Fusing
t = 10
ms§
On-State
Voltage Drop
@ Rated
Current
Tj = 25 °C
t = 10 ms
156-B20…1
4
6
Max.
SCCR
(65 kA)
Fuse
Current
‡
Size [A]
Power Dissipation [W/A]
20
1.10
30
0.95
45
0.90
50
0.85
75
0.90
70
0.90
90
0.93
Dual-Phase
25/32
2.80
Three-Phase
20/25/32
1.92
30
1.00
50
0.85
30
0.95
50
0.85
Single-Phase with Current Monitoring
Single-Phase with Multi-Function Analog Control
13
www.ab.com/catalogs
4-172
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Specifications
Additional Specifications that only apply to the Single-Phase with Current Monitoring Contactor
Supply Status Indication
Green LED, Half Intensity
Control Status Indication
Green LED
Overtemp Alarm Trip Indication
Red LED, Intermittent
Alarm Indication (except for overtemp alarm)
Red LED
Power Supply Voltage, Vcc
24V DC +/- 15%
Maximum Supply Currrent
22 mA (per device)
Maximum Control Input Current
1.5 mA
Maximum PLC Current @ 24 VDC
275 uA (per device)
Alarm Output Current, Maximum
Alarm Output Voltage
Minimum Teach Current
Minimum Partial Load
Current
1
50 mA DC
NPN (N.O.)
1 + 0.15 Io
PNP (N.O.)
VCC - 1 - 0.15 Io
2
≤ 50
Maximum number of Parallel Outputs
Current Monitoring
Measurement Range
0
30 A
0.3 … 30 A AC rms
50 A
0.5 … 50 A AC rms
30 A
0.3 A AC rms
50 A
0.5 A AC rms
30 A
50 mA AC rms
50 A
83 mA AC rms
3
4
Additional Specifications that only apply to the Single-Phase with Multi-Function Analog Control Contactor
Load Status Indication
Red LED
Control Status Indication
Green LED
Control Current Range
Current Controlled Input
Specifications
4…20 mA
Max. Allowable Current
50 mA
Pick Up Current
4.2 mA
Drop Out Current
3.9 mA
Reverse Polarity
Protected
Yes
Voltage Drop
Voltage Controlled Input
Specifications
Supply Voltage Range,
Vss§
20…28V AC/DC
Supply Current§
18 mA @ 24V DC
23 mA @ 24V AC
Control Voltage Range,
Vcc
7
0…10V DC
Control Input Current
0.1 mA @ 10V DC
Reverse Polarity
Protected
Yes
Pick up Voltage
0.5V DC
Drop out Voltage
0.05V DC
8
0…99%
Current Control Level
Voltage Control Level
0%
4 mA
0V DC
25%
8 mA
2.5V DC
50%
12 mA
5V DC
75%
16 mA
7.5V DC
99%
20 mA
Mode 1 - Phase Angle
9
10
10V DC
1/300 @ 50 Hz , 1/300 @ 60 Hz
Mode 2 - Full Cycle
Output Power Resolution
6
10V DC @ 20 mA
Output Power Range
Transfer Characteristics Output Power %
5
1/64 @ 50 Hz , 1/64 @ 60 Hz
Mode 3 - 1 Sec Burst
1/50 @ 50 Hz , 1/60 @ 60 Hz
Mode 4 - 3 Sec Burst
1/150 @ 50 Hz , 1/180 @ 60 Hz
Mode 5 - 10 Sec Burst
1/500 @ 50 Hz , 1/600 @ 60 Hz
11
§ The 0…10V DC type contactor requires a 24V AC/DC supply to power the control circuitry of the solid-state contactor.
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-173
Bulletin 156
Solid-State Contactors
Specifications
Applications for Non-Motor Loads
0
1
2 Single-Phase Contactors
in 3-phase application
Delta and Star Connection
Single-Phase Contactors
Line-Neutral/Line-Line
2
3
P= IL*UL
4
5
P=1.73*IL*UL
6
7
3 Single-Phase Contactors
in 3-phase application
Delta, Star, Star with Neutral Connection
8
9
10
P=1.73*IL*UL
11
12
13
www.ab.com/catalogs
4-174
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Specifications
Applications for Non-Motor Loads, Continued
0
1
Dual-Phase Contactor
in 3-phase application
Delta and Star Connection
Dual-Phase Contactor
Line-Neutral/Line-Line
2
3
P=1.73*IL*UL
P=1.73*IL*UL
4
5
6
7
Three-Phase Contactor
Delta and Star Connection
8
P=1.73*IL*UL
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-175
Bulletin 156
Solid-State Contactors
Specifications
Typical Wiring Diagrams
0
Single-Phase
1L1 3A1
1
~
Control Input
(+,~)
~
(-,~)
LOAD
2
2T1 4A2
156-B…1
3
22 mm Device
Overtemperature Alarm
Output: §
Max. Voltage: 50V DC
Max. Current: 50 mA
4
4…32V DC
Control input
+
24…275V AC
24…275V AC
Control input
~ Control input
~
1L1 5A3 3A1
5
1L1 5A3 3A1
1L1 5A3 3A1
~
~
6
~
~
LOAD
~
LOAD
~
LOAD
2T1 6A4 4A2
Control/Fan/Alarm
supply common
24V DC, 200 mA
7
+
Fan
- 0V
Fan supply input
24V DC, 200 mA +
-
8
2T1 6A4 4A2
2T1 6A4 4A2
~
~
24…275V AC
Control input
24…275V AC
Control input
DC control with fan
AC control with fan
AC control without fan
Example: 156-B75CB1
Example: 156-B75CA1
Example: 156-B50CA1
45 or 90 mm Device
9
10
§
Overtemperature alarm protection/cutout on 75 and 90 A units with 24V DC control.
Integrated fan comes with 75 and 90 A units. Fan must be wired to 24V DC source for contactor to operate.
Dual-Phase
LINE
LINE
5…32V DC
Control input
1L13L2 5L3
11
AC Control Input
Example: 156-B32AA2
DC Control Input
Example: 156-B32CB2
12
2T14T26T3
LOAD
24…275V AC
Control input
1L1 3L2 5L3 A3 A1
A1
2T14T2 6T3 A4 A2
A2
0V
Control input
LOAD
13
www.ab.com/catalogs
4-176
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
24…275V AC
Control input
Bulletin 156
Solid-State Contactors
Specifications
Typical Wiring Diagrams, Continued
Three-Phase
0
Single-Phase with Current Monitoring (PNP)
Over-temperature alarm output §
Max. voltage: 50V DC
Max. current: 50 mA
LINE
LINE
+
Alarm/Remote
+
5…32V DC Control input
+ 4…32V DC
5…32V DC Control input
1L1 3L2 5L3 A3 A1
1
1L1 3L2 5L3 A3 A1
1L1 5A3 3A1
DC Control Input + Fan +
overtemperature alarm
Example: 156-B32CB3
DC Control Input
Example: 156-B20CB3
~
2T1 4T2 6T3
2
2T1 4T2 6T3 A4 A2
A2
~
LOAD
0V Control/fan/alarm input
0V Control input
LOAD
LOAD
Fan Supply input +24V DC, 65 mA
2T1 6A4 4A2
3
LINE
24…275V AC or
+24…190V DC
1L1 3L2 5L3 A3 A1
24V DC +
3A1:
5A3:
6A4:
4A2:
AC Control Input + fan
Example: 156-B32AA3
- 0V
Control input 4…32V DC
Alarm output PNP open collector
Supply 24V DC
Control/Alarm GND 0V
4
2T1 4T2 6T3 A4 A2
§
5
24…275V AC
or 0V DC
LOAD
+ Fan supply input +24V DC, 65 mA
Overtemperature alarm protection/cutout on 32 A units with 24V DC control.
Integrated fan comes with 32 A units. Fan must be wired to 24V DC source for contactor to operate.
6
Single-Phase with Current Monitoring (NPN)
7
Alarm/Remote
+ 4…32V DC
8
1L1 5A3 3A1
1L1 Alm Ctrl
1L1 Alm Ctrl
INPUT
OUTPUT
~
~
OUTPUT
LOAD
2T1 6A4 4A2
24V DC +
3A1:
5A3:
6A4:
4A2:
Control input 4…32V DC
Alarm output NPN open collector
Supply 24V DC
Control/Alarm GND 0V
Notes:
1. Control input (terminal A1) and remote alarm
(terminal A3) must have common ground
2. The current monitoring SSC and PLC
must be sourced from the same 24V DC supply
3. PNP and NPN should not be connected
to the same alarm line
4. A maximum of 6 loads can be
connected in parallel
OUTPUT
2T1 24V GND
24 VDC
- 0V
9
PLC
2T1 24V GND
24V
GND
+
_
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-177
Bulletin 156
Solid-State Contactors
Specifications
Typical Wiring Diagrams, Continued
0
Multi-function Analog
-
+ 4…20 mA
0V -
Control Input
1
Control Input
5A3 3A1
1L1
~
~
LOAD
2T1
3
1L1
5A3 3A1
2T1
6A4 4A2
~
~
2
+ 10V DC
LOAD
6A4 4A2
24V DC/AC +
Supply Input ‡
3A1 - 5A3: Control input current
Example: 156-B30BC1
- 0V
3A1 - 5A3: Control input voltage, Vcc
4A2 - 6A4: Supply input voltage, Vss
Example: 156-B30BV1
‡ Requires a 24V AC/DC supply to power the control circuitry of the solid-state contactor.
4
5
6
Load Versus Ambient Temperature Derating Curves
Single-Phase (Standard)
9
30
20
30A
20A
10
0
20
30
40
45/50/75 A
80
50
60
70
60
50
75A
40
30
50A
45A
20
20
70
30
50
60
70
90
80
70
60
50
90A
40
70A
30
20
Single-Phase (Current Monitoring and Multifunction
Analog)
60
11
Load Current (AACrms)
50
12
40
156-B50…
30
156-B30…
20
10
0
20
13
30
40
50
60
Surrounding Temperature (˚C)
Note: Based on 100% duty cycle
www.ab.com/catalogs
4-178
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
70/90 A
100
Surrounding Temperature (˚C)
Surrounding Temperature (˚C)
10
40
Load Current (AACrms)
Load Current (AACrms)
8
20/30 A
40
Load Current (AACrms)
7
30
40
50
60
Surrounding Temperature (˚C)
70
Bulletin 156
Solid-State Contactors
Specifications
Dual- and Three-Phase
0
20/25/30 A
Load Current (AACrms)
1
2
3
156-B32…3
4
156-B32…2
156-B25…2/3
156-B20…3
5
Surrounding Temperature (˚C)
6
Panel Mounting Recommended Contactor Spacings
7
8
9
120 mm
22.5 mm
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-179
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves
0
Single-Phase
20 A (156-B20…1)
21A
20A
19A
1
Load Current (AACrms)
18A
2
3
17A
16A
15A
14A
13A
12A
22.5mm
11A
10A
9A
10.0mm
6.0mm
3.0mm
0.0mm
8A
7A
4
6A
Load Current (AACrms)
5
6
7
8
20˚C
25˚C
30˚C
35˚C
40˚C
45˚C
50˚C
55˚C
60˚C
65˚C
70˚C
30 A (156-B30…1)
31A
30A
29A
28A
27A
26A
25A
24A
23A
22A
21A
20A
19A
18A
17A
16A
15A
14A
13A
12A
11A
10A
9A
22.5mm
20˚C
25˚C
30˚C
35˚C
40˚C
45˚C
50˚C
55˚C
60˚C
65˚C
10.0mm
6.0mm
3.0mm
0.0mm
70˚C
9
45 A (156-B45…1)
46A
44A
42A
Load Current (AACrms)
10
11
12
40A
38A
36A
34A
32A
30A
28A
26A
22.5mm
10.0mm
6.0mm
24A
22A
13
20A
3.0mm
0.0mm
20˚C
25˚C
30˚C
35˚C
40˚C
www.ab.com/catalogs
4-180
45˚C
50˚C
55˚C
60˚C
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
65˚C
70˚C
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves, Continued
Single-Phase
0
50 A (156-B50…1)
52A
50A
1
Load Current (AACrms)
48A
46A
44A
42A
2
40A
38A
36A
34A
3
32A
30A
22.5mm
10.0mm
6.0mm
28A
26A
Load Current (AACrms)
24A
20˚C
76A
74A
72A
70A
68A
66A
64A
62A
60A
58A
56A
54A
52A
50A
48A
46A
44A
42A
40A
38A
36A
25˚C
30˚C
35˚C
40˚C
45˚C
50˚C
55˚C
60˚C
65˚C
4
3.0mm
0.0mm
70˚C
5
75 A (156-B75…1)
6
7
22.5mm
10.0mm
6.0mm
8
3.0mm
0.0mm
20˚C
25˚C
30˚C
35˚C
40˚C
45˚C
50˚C
55˚C
60˚C
65˚C
9
70˚C
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-181
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves, Continued
0
Single-Phase
Load Current (AACrms)
1
2
3
4
72A
70A
68A
66A
64A
62A
60A
58A
56A
54A
52A
50A
48A
46A
44A
42A
40A
38A
70 A (156-B70…1)
20˚C
25˚C
30˚C
35˚C
40˚C
45˚C
50˚C
55˚C
60˚C
65˚C
22.5mm | 10.0mm
6.0mm
3.0mm | 0.0mm
70˚C
Surrounding Temperature (˚C)
5
90 A (156-B90…1)
Load Current (AACrms)
6
7
8
9
92A
90A
88A
86A
84A
82A
80A
78A
76A
74A
72A
70A
68A
66A
64A
62A
60A
58A
56A
54A
52A
50A
48A
20˚C
25˚C
30˚C
35˚C
40˚C
45˚C
50˚C
55˚C
60˚C
Surrounding Temperature (˚C)
10
11
12
13
www.ab.com/catalogs
4-182
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
65˚C
22.5mm
10.0mm
6.0mm
3.0mm
0.0mm
70˚C
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves, Continued
Dual-Phase
0
156-B25…2
1
Load Current per phase [A]
2
3
4
5
Surrounding Temperature (˚C)
6
156-B32…2
7
Load Current per phase [A]
8
9
10
11
12
Surrounding Temperature (˚C)
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-183
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves, Continued
0
Three-Phase
156-B20…3
1
3
4
Load Current per phase [A]
2
5
6
Surrounding Temperature (˚C)
7
156-B25…3
9
10
Load Current per phase [A]
8
11
12
Surrounding Temperature (˚C)
13
www.ab.com/catalogs
4-184
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves, Continued
Three-Phase
0
156-B20…3
1
Load Current per phase [A]
2
3
4
5
6
Surrounding Temperature (˚C)
7
156-B25…3
8
Load Current per phase [A]
9
10
11
12
Surrounding Temperature (˚C)
www.ab.com/catalogs
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-185
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves, Continued
0
Three-Phase
156-B32…3
2
3
4
Load Current per phase [A]
1
5
6
Surrounding Temperature (˚C)
Single-Phase with Current Monitoring
7
30 A (156-B30...N or P)
9
10
11
Load Current (AACrms)
8
12
13
Surrounding Temperature (˚C)
www.ab.com/catalogs
4-186
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Specifications
Panel Mounting Load Derating vs. Spacing Curves, Continued
0
50A (156-B50...N or P)
Load Current (AACrms)
1
2
3
4
5
6
Surrounding Temperature (˚C)
Multi-function Analog
7
30A (156-B30...C1 or V1)
Load Current (AACrms)
35
30
8
25
20
9
15
10
22.5 mm
10.0 mm
6.0 mm
3.0/ 0.0 mm
5
0
20
25
30
35
40
45
50
55
60
65
10
70
11
Surrounding Temperature (˚C)
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-187
Bulletin 156
Solid-State Contactors
Specifications/Approximate Dimensions
Panel Mounting Load Derating vs. Spacing Curves, Continued
0
50A (156-B50...C1 or V1)
55
50
Load Current (AACrms)
1
2
45
40
35
30
25
20
22.5/ 10.0 mm
6.0 mm
3.0 mm
0.0 mm
15
3
10
20
30
40
50
60
70
Surrounding Temperature (˚C)
4
Approximate Dimensions
Dimensions in millimeters. Dimensions are not intended for manufacturing purposes.
5
Refer to column 3 of the Power Output table on page 4-172 for cat. no. dimension reference.
22.5 mm
4.4
12.5
2
12.5
2.
22.5
Ø5
R
6
45 mm (shown with fan)§
9
51.8
Ø5
122
81.7
102.6
94
81.7
8
94
7
46.5
103
4.4
51.8
45
10
46.5
103
§ The fan adds approximately 28 mm to the height of the SSC. Subtract 28 mm for
the approximate height of SSCs without fans. Refer to page 4-169 for products
with fans.
11
12
13
www.ab.com/catalogs
4-188
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Approximate Dimensions
90 mm (shown with fan)§
0
1
102.5
2
3
4
5
6
§ The fan adds approximately 28 mm to the height of the SSC. Subtract 28 mm for the
approximate height of SSCs without fans. Refer to page 4-169 for products with
fans.
7
8
9
10
11
12
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-189
Bulletin 156
Solid-State Contactors
Approximate Dimensions/Current Monitoring Operation
Overtemperature Alarm Cutout/Protection Operation
0
The Bulletin 156-B… Solid-State Contactor (SSC) with a fan (Cat. Nos. 156-B75...1, 156-B90...1, and 156-B32...3) has an overtemperature
alarm, cutout/protection feature. The cutout feature protects the SSC electronic switching circuit from overtemperature damage by
automatically switching off the output (load) when the core temperature of the SSC exceeds 125 °C (257 °F). In this condition the fan will be
running unless there is a fan circuit issue. When the cutout occurs the SSC red LED will light and if the alarm contact is wired it will close to
notify a monitoring device such as the PLC of the condition. The following diagram provides additional details.
1
Note: For a standard unit without an overtemperature alarm. The SCO protective cutout feature still functions. When the unit cools to within
allowable limits it returns to operation.
SSC Input
2
≥20 ms
3
Green LED
4
SSC Output
5
Overtemperature
Sensing
6
Over-temperature
detection
Red LED
7
Over-temperature protection is ON
SSC Output disabled
Closed
Alarm Status
Open
8
After over-temperature condition is removed, SSC can be reset by switching OFF the control input for more
than 20 ms and switching back ON: this will switch ON the SSC output
9
Current Monitoring Operation
Product Description
10
The Bulletin 156-B… P or …N Current-Monitoring Solid-State Contactor (SSC) is a single-phase device that is sensitive to variations in load
current conditions. This microprocessor-based device can detect a partial load failure and ensure the highest process quality. Current sensing
is integrated inside to eliminate the need to install an external current transformer. A membrane TEACH button on the front is used to effect a
simple “teach in” of the normal operating current setpoint. Alarm delay time is set by a potentiometer. Typical conditions that can be detected
are heater break or open-circuit, blown fuse, semiconductor short-circuit and faulty power connection.
Alarm Operation
11
Current Setpoint
The current setpoint is the nominal operating current that is
expected when all the heater loads are functioning properly. If the
heater loads are faulty or the supply voltage is not close to the
nominal level, the wrong setpoint will be stored during TEACH.
Local Functions
Local functions can be activated by using the TEACH push button
on the front of the SSC. While an alarm is being issued by any SSC
connected to the common alarm line or a remote command is being
issued, no local commands are accepted.
12
Initialization
As shipped, no setpoint is stored in the SSC flash memory. Both
green and red LEDs will flash intermittently to indicate that a
setpoint must be stored using the TEACH procedure. The load will
not go on when the control is applied until a TEACH command is
successful.
Local RESET
When an alarm has occurred the device can be locally RESET by
pressing the TEACH button for 1 second. The red LED will flash
once. This will reset the alarm. If the alarm condition has been
cleared the SSC will return to normal operation. If the alarm
condition is still active, the SSC will automatically go back to alarm
status.
13
www.ab.com/catalogs
4-190
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Current Monitoring Operation
Alarm Operation
Local TEACH
Press and hold the TEACH button for approximately 3 seconds. The
red LED will flash after each second. After the LED flashes 3 times,
release the button. If the “teach” command was accepted, the
heater loads are automatically switched ON. The red LED will flash
quickly 10 times. When the current setpoint has been stored
successfully, the red and green LEDs will scroll intermittently to
indicate that the TEACH procedure has been completed. The load
will now be switched on or off according to the control input’s
status.
It is very important to hold the button down for only 3 flashes of the
red LED to make a successful TEACH. If the TEACH procedure is
not successful, the SSC will automatically reset to factory default
(i.e., no setpoint stored).
Local TEST
In the absence of a signal on the “control input” terminal, a local
TEST can be made by pressing and holding the TEACH button for 5
seconds. After the red LED flashes 5 times, release the button. The
SSC will switch ON the load for 1 second. This test detects if there
is an undercurrent or heater break alarm condition.
Remote Setup Procedure
Remote functions can be activated with a PLC or any other logic
controller by applying timed pulses to the alarm terminal: >10V for
Cat. No. 156-B…P and <10V for 156-B…N.
Remote TEACH
Apply a 3-second pulse. The red LED will flash after each second.
After the LED flashes 3 times and the remote “teach” command has
been accepted, the heater loads (of all SSCs connected to the same
alarm line) are automatically switched ON and the red LED will flash
quickly 10 times. When the current setpoint has been stored
successfully, the red and green LEDs will scroll intermittently to
indicate that the TEACH procedure has been completed. The load(s)
will now be switched on or off according to the control input’s status
Remote RESET/ UNBLOCK
When an alarm has occurred the SSC can be remotely RESET by
applying a 1-second pulse. A 1-second pulse will also unblock local
TEACH of all SSCs connected to the same alarm line. The red LED
will flash once. This will reset the alarm. If the alarm condition has
been cleared the SSC will return to normal operation. If the alarm
condition is still active, the SSC will automatically go back to alarm
status.
Remote BLOCK
Applying a 5-second pulse will force the SSC to block local TEACH.
After this, no local TEACH commands are accepted. To unblock this
condition, a remote RESET must be issued. If the 24V supply is
removed, local TEACH BLOCK is lost. Another REMOTE BLOCK
must be issued.
Heater Break
A Heater Break alarm is given if the current measured through the
SSC is 13% less than the current setpoint stored in the flash
memory for a period of time greater or equal to the alarm delay
potentiometer setting. The SSC generates one pulse with duration
of 8 seconds on the alarm terminal. The alarm signal is non-latching.
The red LED remains ON after this alarm condition until a RESET is
made. If the measured current changes to within 10% of the Current
Setpoint, before the Alarm DELAY time has elapsed, the Alarm
DELAY timer is reset.
Overtemperature or Overcurrent
This alarm occurs if any one of following two conditions is true:
1. The SSC detects an internal over-temperature condition at any
time during operation and switches off the output. The red LED
flashes intermittently.
2. A current above the nominal SSC rating is measured during
current setpoint TEACH. This action erases the current setpoint from
flash memory and both red and green LEDs will flash intermittently
until a TEACH procedure with an acceptable current is carried out.
In both cases, the SSC generates one pulse with duration of 9
seconds on the alarm terminal. The alarm signal is non-latching.
Thyristor Short-Circuit (Reaction time = 110 ms)
The SSC generates one pulse with duration of 10 seconds on the
alarm terminal. The alarm signal is non-latching.
The red LED remains ON after this alarm condition until a RESET is
made.
Alarms Connected in Parallel to one PLC Input and one PLC
Output
For REMOTE operation, up to 50 SSCs can be connected in parallel
to at least one PLC input. This PLC input must also be connected in
parallel to the PLC output. The PLC input must be programmed to
detect alarms while the PLC output must be programmed to supply
the pulses required for REMOTE Setup. When more than one SSC is
present, pulses from the PLC output or alarm pulses from any
device will cause the red LEDs on all devices in parallel to flash
intermittently for a max. of 6.25 seconds. After this time, it is only
SSCs with an alarm condition that will have their red LED on.
Example:
Set the alarm delay setting to 2 s (minimum). If the full load current
is set at 30 A, then there will be an alarm condition if the current is
under 26.1 A for more than 2 s. (Any fluctutation in the load current
that is present for <2 s will not be signalled – this is intended to
eliminate false alarms due to short duration undervoltage conditions
on the supply phase). If the control input goes off within the 2 s, the
alarm timer will not be reset provided the control input goes on
again within 8 s (4x2 s).
0
1
2
3
4
5
6
7
8
Alarm Condition
9
Alarms
Alarm DELAY
A potentiometer on the front of the SSC allows a time delay on the
heater break alarm between 0…40 s.
10
For heaters having a low cold resistance, the time for the inrush
current to decay to a value less than 13% of the current set-point
plus an additional 20 ms must be added to the potentiometer alarm
delay setting.
11
For an alarm signal to occur, the alarm condition must persist
throughout this time period. The alarm output is enabled only after
this time delay has passed. However, if the control input is disabled
for a period of time equal to four times the delay setting, the internal
alarm delay timer is reset automatically. (See Alarm Operation
graphs.)
12
SSC remains OFF due to Line Voltage Loss or Thyristor Open
Circuit Failure (Reaction Time = 85 ms)
The SSC generates one pulse with duration of 7 seconds on the
alarm terminal. This alarm is non-latching. The red LED remains ON
after this alarm condition until a RESET is issued.
www.ab.com/catalogs
13
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-191
Bulletin 156
Solid-State Contactors
Current Monitoring Operation
Alarm Operation
0
Reset Condition
1
2
3
Setup and Alarms
RESET
4
TEACH
5
TEST
6
7
BLOCK
ALARMS
Remote reset
PLC output to alarm terminal high >1 s (<2 s)
Local reset
Push and hold button for >1 s (<2 s)
Visual indication
Red LED ON
Remote teach
PLC output to alarm terminal high >3 s (<4 s)
Local teach
Push and hold button for >3 s (<4 s)
Visual indication
Red LED ON
Remote test
Not available
Local test
Push and hold button for >5 s (<6 s)
Visual indication
Red LED ON
Remote block
PLC output to alarm terminal high >5 s (<6 s)
Local block
Not available
Visual indication
Red LED ON
SSC remains OFF due to line voltage loss
or thyristor open circuit fault
Transistor alarm non-latching pulse (7 s)
Control input ON
Green LED — full intensity
Visual indication
Red LED ON (latching)
Current under-range detected during TEACH
8
Red and Green LEDs flashing together
Control input
Green LED — full intensity
Heater break alarm
Visual indication
9
Current over-range detected during TEACH
10
Transistor alarm non-latching pulse (8 s)
Transistor alarm non-latching pulse (8 s)
Red and Green LEDs flashing together
Control input
Green LED — full intensity
Reset
Local or remote 1 s pulse
Transistor alarm non-latching pulse (9 s)
Visual indication
Red LED flashing
SSC output
Output is switched off during an OTP alarm
Control input
Green LED — full intensity
Thyristor short-circuit
Visual indication
Alarm
delay
Red LED ON (latching)
Visual indication
Over-temperature alarm
11
Transistor alarm non-latching pulse (7 s)
Visual indication
Transistor alarm non-latching pulse (10 s)
Red LED ON (latching)
12
13
www.ab.com/catalogs
4-192
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Bulletin 156
Solid-State Contactors
Multi-Function Analog Operation
Mode Selection
Product Description
The Bulletin 156-B… Analog Control Solid-State Contactor (SSC) is
a single-phase device that provides proportional output power in
relation to the analog control signal level applied. This
microprocessor-based device provides 5 different switching modes
integrated into one package. A selector switch on the front of the
device is used for the selection of the preferred mode of operation,
i.e., either Phase Angle, Distributed Full Cycle, or Burst Control. This
multi-function selection makes this SSC ideal for the control of a
variety of loads, including heaters and lamps. The control signal can
be either 4…20 mA or 0…10V DC. 4 mA or 0V correspond to zero
output power, and 20 mA or 10V DC correspond to full output
power.
The product is ready to mount on DIN Rail or chassis and comes
with an integral heatsink.
Operation
MODE 1:
The Phase Angle switching mode works in accordance with the
phase angle control principle, i.e. the output switching point in the
AC sine wave depends on the signal level applied at the input. The
SSC switches off every time the output current crosses zero. See
Figure 1.
MODE 2:
The Distributed mode provides a number of full cycles, evenly
distributed over a fixed period of 1.28 s @ 50 Hz (1.07 s @ 60 Hz),
depending on the control input. Example: with 50% control input,
the SSC output will be on for one cycle and off for one cycle. See
Figure 2.
MODE 3, 4, 5:
The Burst Switching mode generates a number of full cycles,
depending on the control input over fixed periods of 1 s, 3 s or 10 s
for MODES 3, 4 and 5 respectively.
Example: with Mode 4 (3-second burst) configured and 50% control
input, the SSC output will be on for 1.5 s and off for 1.5 s. See
Figure 3.
Modes 2, 3, 4 and 5 use the zero switching principle, thus ensuring
a reduced level of radiated and wire-conducted noise. The
Distributed and Burst Switching modes are not recommended for
light control due to light-flickering.
LED Indication
The top RED LED indicates the load status. It goes ON whenever
the load is activated. The Green LED gives indication of the status
of the control input.
Upon application of control current (for the cat. no. 156-Bxx…C1) to
terminals A1 – A3, the Green LED will be dimly lit, with its intensity
increasing with an increase in control current.
For the cat. no. 156-Bxx…V1, the Green LED will be ON (flickering)
upon application of the supply voltage to terminals A2 – A4. Once a
control voltage is applied to terminals A1 – A3, the Green LED will
be fully ON, if greater than a threshold voltage (approx 0.5V). Note
that the first time the device (voltage control version) is to be
activated, the mains voltage has to be present for the Green LED to
indicate the control status.
Mode
Mode
Mode
Mode
Mode
1
2
3
4
5
0
Phase Angle Switching
Distributed Control
Burst Switching (1 s period)
Burst Switching (3 s period)
Burst Switching (10 s period)
1
Functional Diagram
MODE 1
Phase angle
Figure 1
MODE 2
Distributed Full Cycle
Figure 2
MODE 3, 4, 5
Burst 1 s, 3 s, 10 s
Figure 3
2
3
1 period = 64 cycles
4
1 period = 1 s, 3 s or 10 s
5
6
7
8
9
10
Transfer Characteristics
Output power as a function of control input
Control Current
[mA]
Control Voltage
[V DC]
Output Power [%]‡
4
0
0
8
2.5
25
12
5
50
16
7..5
75
20
10
99
11
12
‡ Time for SSC to process analog changes: 15…20 ms
13
www.ab.com/catalogs
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
4-193
Solid-State Motor Control
Notes
0
1
2
3
4
5
6
7
8
9
10
11
12
13
www.ab.com/catalogs
4-194
Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising