Bissell 40M1 series User`s guide
Bissell 40M1 series is a deep cleaning machine designed for carpets and area rugs. It features a powerful DirtLifter PowerBrush that removes embedded dirt and stains, and a large-capacity clean water tank that allows for extended cleaning without refilling. With its adjustable handle and lightweight design, the Bissell 40M1 is easy to maneuver and use on multiple surfaces. Additional features include a built-in heater to maintain optimal water temperature and a rinsable filter that collects debris for easy disposal.
Advertisement
Advertisement
2
USER'S GUIDE
86T3 & 40M1 SERIES
Thank You
3 Safety Instructions
4-5 Product View
6 Assembly
6-12 Operations
13-15 Maintenance and Care
16 Troubleshooting
17 Replacement Parts
18 Accessories
19 Warranty
20 Product Registration
20 Consumer Services
Earn BISSELL Rewards!
R egister your product today!
See details on back page
T hanks for buying a BISSELL Deep Cleaner
Thanks for buying a BISSELL Big Green Clean Machine. We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your BISSELL Big Green Clean Machine is well made, and we back it with a limited five year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your Big Green
Clean Machine.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President & CEO
2 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
I
MPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
Read all instRuctions befoRe using youR big gReen clean Machine.
WARNING:
To reduce the risk of fire, electric shock, or injury:
■ Do not immerse.
■ Use only on surfaces moistened by cleaning process.
■ Always connect to a properly grounded outlet.
■ See Grounding Instructions.
■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
■ Do not leave machine when it is plugged in.
■ Do not service machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.
■ Use indoors only.
■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
■ Unplug by grasping the plug, not the cord.
■ Do not handle plug or appliance with wet hands.
■ Do not put any object into appliance openings, use with blocked opening, or restrict air flow.
■ Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.
■ Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
■ Do not pick up toxic material
(chlorine bleach, ammonia, drain cleaner, gasoline, etc.).
■ Do not modify the 3-prong grounded plug.
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than described in this user’s guide.
■ Do not unplug by pulling on the cord.
■ Use only manufacturer’s recommended attachments.
■ Always install float before any wet pick up operation.
■ Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage. See the cleaning fluid section of this guide.
■ Keep openings free of dust, lint, hair, etc.
■ Do not point attachment nozzle at people or animals
■ Keep appliance on a level surface.
w w w . b i s s e l l . c o m
■ Do not use without intake screen filter in place.
■ Turn off all controls before unplugging.
■ Unplug before attaching the TurboBrush
■ Be extra careful when cleaning stairs.
® .
■ Close attention is necessary when used by or near children.
SAVE THESE
INSTRUCTIONS.
this Model is foR household and coMMeRcial use.
GROUNDING
INSTRUCTIONS
this appliance must be connected to a grounded wiring system. if it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. the cord for this appliance has an equipment-grounding conductor and a grounding plug. it must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING: improper connection of the equipmentgrounding conductor can result in a risk of electrical shock. check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. do not Modify the Plug. if it will not fit the outlet, have a proper outlet installed by a qualified electrician. this appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. Make certain that the appliance is connected to an outlet having the same configuration as the plug. no plug adapter should be used with this appliance.
8 0 0 . 2 3 7 . 7 6 9 1
3
P roduct view
Spray Trigger
Adjustable
Handle
Tank Carry Handle
Hose Latch
Dirty Water Tank
Front Carry Handle
Power Cord
Flow Indicator
Solution Hose
Connection
Clean Water Tank
4 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
P roduct view
Spray Trigger
Power Switch
Back Carry Handle
Upper Handle
Release
Handle Detent
WARNING:
to reduce the risk of fire and electric shock due to internal component damage, use only bissell cleaning fluids intended for use with the deep cleaner.
Non-BISSELL cleaning solutions may harm the machine and void the warranty.
Cleaning fluid
Keep plenty of genuine bissell 2X formula on hand so you can clean and protect whenever it fits your schedule. always use genuine bissell deep cleaning formulas. non-bissell cleaning solutions may harm the machine and will void the warranty.
bissell
2X fiber cleansing formula with scotchgard ™
Protection bissell
2X Multiallergen
Removal formula with scotchgard
Protection
™ bissell
2X Pet stain and odor
Removal formula with scotchgard
Protection
™ w w w . b i s s e l l . c o m bissell
2X natural orange extract formula with scotchgard
Protection
™ bissell
2X lavender essence formula with scotchgard ™
Protection bissell
2X
Professional deep cleaning formula with scotchgard
Protection
™ bissell tough stain
Precleaner
8 0 0 . 2 3 7 . 7 6 9 1
5
A ssembly
Your BISSELL Big Green Clean Machine comes with no assembly required!
O
perations
Before you clean
1. Move furniture to another area if cleaning the entire room (optional.)
2. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.
3. Plan your cleaning route to leave an exit path. it is best to begin cleaning in the corner farthest from your exit.
4. Pretreating (optional) is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways.
A. spray the bissell tough stain
Pre-treat formula onto high traffic areas, soiled areas or stains.
B. allow to penetrate for at least three minutes.
C. clean as normal using your bissell big green clean Machine, following the instructions on page 7.
ATTENTION:
some berber carpets have a tendency to fuzz with wear.
Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see stain Removal instructions on page 12.
6 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
Carpet cleaning
1. Remove dirty water tank. Pull dirty water tank handle to upright position and lift up to remove dirty water tank.
2. lift clean water tank from the base of machine.
A. unscrew cap on top of the clean water tank. fill tank to FILL line with clean, hot tap water.
B. Measure bissell formula using cap on tank. fill cap to line twice for each full tank of water. always use genuine bissell formulas to maximize cleaning and for the safety of your machine
C. screw cap back onto clean water tank and place tank onto base of the machine.
3. Replace dirty water tank securely on top of the clean water tank and push handle back to lock into place.
4. Plug into a proper outlet and turn the power switch to the on ( I ) position.
5. detent handle by pushing down on the green lever on the back of the machine while pulling back.
6. Cleaning strokes. While pressing the trigger, make one slow forward wet pass and another back. let the formula and dirtlifter Powerbrushes do the work for you.
Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object and then plug machine in to reset the circuit breaker.
1.
2.
3.
2C.
5.
1.
2A.
3.
Keep plenty of genuine BISSELL 2X formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
7
O
perations
Carpet cleaning continued
7. Cleaning strokes. Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying.
Repeat cleaning passes until solution being pulled up appears clean. continue passes without pressing the trigger until you can’t see any more water being pulled up.
8. Remove the dirty water tank by pulling the handle to the upright position and lift up. carry the tank like a bucket to a utility sink or outside where you will dispose of the dirty water.
9. unlatch the top of the tank from the bottom by pushing the handle all the way forward and lifting the top off. Pour dirty water into the sink.
Note: You may notice hair and debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away.
10. fill the clean water tank with clean hot tap water and follow instructions 2 - 7 to continue cleaning.
8.
9.
9.
CAUTION:
Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.
8 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
Cleaning with attachments
Your Big Green Clean Machine may have come with a hose and at least one attachment for cleaning stairs, upholstery and more.
1. Important! if using to clean upholstery, check upholstery tags.
A. check manufacturer’s tag before cleaning. “W” or “Ws” on the tag means you can use your big green clean Machine. if the tag is coded with an “X” or an “s” (with a diagonal stripe through it) or says “dry clean only”, do not proceed with any deep cleaning machine. do not use on velvet or silk. if manufacturer’s tag is missing or not coded, check with your furniture dealer.
B. check for colorfastness in an inconspicuous place.
C. if possible, check upholstery stuffing. colored stuffing may bleed through fabric when wet.
D. Plan activities to allow upholstery time to dry.
E. Vacuum thoroughly to pick up loose debris and pet hair. use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.
2. fill the clean water tank. lift clean water tank from the base of machine.
A. unscrew cap on top of the clean water tank. fill tank to FILL line with clean, hot tap water.
B. Measure bissell formula using cap on tank. fill cap to line twice for each full tank of water. always use genuine bissell formulas to maximize cleaning and for the safety of your machine.
C. screw cap back onto clean water tank and place tank onto base of the machine.
2.
gcghhjj jhffhl k llgh
Manufacturer’s tag
2C.
2A.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
O
perations
Cleaning with attachments continued
3. attach hose
A. connect solution hose to the hose connection point on unit, next to flow indicator. insert hose and turn clockwise until locked into place.
B. open hose latch on the front of the unit and insert hose into place. turn clockwise until locked into place.
3A.
4. attach the cleaning tool to the end of the hose.
3B.
5. clean by pressing the red trigger to spray solution onto the area to be cleaned. slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. continue to clean in the area, working in small sections, until no more dirt can be removed. Caution: Do Not Overwet
4.
6. Remove and rinse tool in clean running water. let dry completely.
7. Remove and rinse hose in clean, running water. let dry completely.
8. empty dirty and clean water tanks and rinse following instructions on page 13.
5.
3B.
10 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
Cleaning with Oxy Gen2 tool
Select models only
1. follow instruction on page 10 to attach hose to machine.
2. To pretreat heavy traffic areas:
A. Pour oxy gen2 formula into the oxy gen2 tool and attach tool to your machine’s hose.
B. hold tool 2-4 inches above the floor and press red trigger to spray onto carpet.
C. Wait for 3-5 minutes then clean as normal using your machine
3. To use as a spot and stain tool on carpet:
A. Pour oxy gen2 formula into the oxy gen2 tool and attach tool to your machine’s hose.
B. hold tool 1-2 inches above the floor and press trigger to spray onto carpet. spray generously, but do not overwet the carpet.
C. Move the bristles back and forth over the spot.
D. suction up solution/stain immediately with your tool.
E. Repeat as needed.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
11
O
perations
Stain Removal
Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent
1. blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse.
2. gently scrape up any semi-solids with a spoon or spatula. do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery.
3. if the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum.
4. be sure to test any spot removal formulas in an inconspicuous area first. this is important as some dyes and materials could be damaged or discolored by cleaning solvents. if such a change should occur, try a different solution or call a professional.
5. if cleaning on berber carpeting, gently run your machine over a hidden area. if no fuzzing occurs, continue cleaning in soiled area.
6. using the bissell tough stain
Precleaner, spray evenly over soiled area. DO NOT OVERWET. Wait 3-5 minutes. gently work the solution by blotting area with a clean, damp, color safe cloth.
7. clean using the unit or the hose with attachment.
12 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
M
aintenance and care
Machine storage
Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed out and dried before the next use.
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
Machine care
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete
1. turn power off (0). unplug the machine and wrap the power cord.
2. after emptying the clean and dirty water tanks, rinse them out with running hot tap water.
3. the top half of the dirty water tank can also be rinsed clean through the nozzle area.
4. to clean attachments, remove from hose and rinse in clean, running water and let dry. clean the hose by removing it from the machine and let running tap water run through both ends.
5. after carpet is dry, vacuum again to remove hair and fuzz.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
13
M
aintenance and care
Belt removal and replacement
1. turn off the machine and unplug it from the outlet.
2. Remove the dirty and clean water tanks from the base of the machine.
3. While standing behind the unit, lay the unit on its’ side (cord side up)
4. looking at the bottom of unit, find the back center of the brush carriage where the carriage latch is located. it is between the brush assembly and the front wheels.
5. Pull brush carriage towards you with one hand until it stops, then pinch the carriage latch with other hand while pulling the carriage towards you. the carriage should swing out to access belt cover.
6. Remove three screws from cover. lift and remove to access brush carriage.
7. turn the belt inward towards the large pulley while lifting out.
8. Place new belt over small pulley first and then slip the belt over the large pulley.
9. Replace the brush carriage and screws.
10. Push brush carriage back into place making sure the carriage latch locks back into place.
3.
4.
6A.
7.
WARNING:
to reduce the risk of fire, electric shock, or injury,turn power off and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
5.
6B.
8.
9.
10.
14 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
M
aintenance and care
Brush removal and replacement
1. turn off (0) the machine and unplug from the outlet.
2. Remove the dirty and clean water tanks from the base of the machine.
3. While standing behind the unit, lay the unit on its’ side (cord side down).
4. looking at the bottom of the unit, find the center of the brush carriage where the carriage latch is located. it is between the brush assembly and wheels.
5. Pull the brush carriage towards you with one hand until it stops. Pinch the carriage latch with the other hand while pulling the carriage towards you. the carriage should swing out to access brush end cover.
6. Remove three screws from endcap. Pull endcap off to release brush roll.
5.
6A.
7. With cover removed, the brush comes out easily by tilting the loose end out of the carriage.
8. to replace the brush roll back into the unit, place the large open end of the brush onto the carriage and tilt opposite end back into place. (same image as 7, just change arrow direction)
9. With the brush sitting relatively straight up and down by itself, place endcap back on top and replace three screws. the brush will need to be held and centered to the cover while placing it back on.
10. spin the brush by hand to make sure it turns freely with some minor resistance from the motor. Push brush carriage back into place with a light pull against the lock.
4.
7.
9.
3.
6B.
8.
10.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
15
T
roubleshooting
Reduce Spray or No Spray
Possible causes
1. Water tank may be empty
2. Tank may not be seated completely
3. Pump may have lost prime.
4. Debris filter on base is clogged
DirtLifter ® PowerBrush does not turn
Possible causes
1. The belt is off or broken
2. The unit is in the upright position
3. Circuit breaker on machine may have tripped
Cleaner not picking up solution
Possible causes
WARNING:
to reduce the risk of fire, electric shock, or injury,turn power off and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
Remedies
1. Fill clean tank with hot tap water
2. Turn power OFF ( 0). Remove and reseat tank.
3. Turn power OFF (0) and then back ON (I). Wait one minute,
then depress trigger
4. Use hand to remove debris
Remedies
1. Turn power OFF ( O ) and unplug unit from outlet. Follow
instructions on page 14
2. Brushes only rotate when unit is reclined using the
detent pedal
3. Turn the machine OFF ( O ) and unplug from outlet. Check
to see if foreign object is caught in brush roll. Remove
object. Plug machine in to reset circuit breaker
Remedies
1. Tanks may not be seated properly
2. Clean water tank is empty
3. Dirty water tank has picked up the maximum amount of dirty water the red float door has closed
1. Pick up both the clean and dirty water tanks and reseat
them so they fit snuggly on the unit
2. Check fluid levels in clean water tank and refill if necessary
3. Empty dirty water tank. Refill clean water tank with water
and formula. Place both tanks back onto unit
4. Red float “door” in the tank may have closed as a result of 4. Turn the machine OFF( 0), allowing red float door to release bumping an object or moving machine back and forth too quickly into the open position,. Turn the unit back ON ( I) to
continue cleaning. Be sure your forward and backward
strokes are completed at a slower pace
5. Front nozzle of machine is clogged 5. Use fingers to remove any debris from this area
6. Upper body filter is clogged 6. Use fingers to remove any debris from this area
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.
16
6
11
R
eplacement parts - BISSELL Big Green Clean Machine
Item Part No. Part Name
1
2
203-7443
203-7451 hose assembly float
7
8
9
3
4
5
6
10
11
203-7452
203-7453
203-7454
120-7455
203-7456
203-7457
203-7458
120-7455
203-7460 dirty tank assembly dirty tank gasket clean tank assembly clean tank cap assembly nozzle gasket nozzle assembly brush brush endcap belt
1 2 3 4 5
7 8 9 10 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
17
A
ccessories
11
12
13
14
Item
1
6
7
8
9
10
2
3
4
5
Part No.
203-6651
203-6652
203-6653
203-6654
203-6655
203-6655
203-7240
62e5
99K5
89Q5
83P3
34b5
78h6
4001
Part Name
3” tough stain tool
Powered turbobrush® hand tool
4” upholstery tool
6" stair tool spraying crevice tool
2-in-1 crevice tool oxy gen2 tool
2X fiber cleansing formula with scotchgard™ Protection 24 oz.
2X Pet stain and odor Removal formula with scotchgard™ Proection 24 oz.
2X Multi-allergen Removal formula with scotchgard™
Protection 24 oz.
2X natural orange extract formula with scotchgard™
Protection 24 oz.
2X lavender essence formula with scotchgard™ Protection 24 oz.
2X Professional deep cleaning formula with scotchgard™ 24 oz.
tough stain Precleaner 22 oz.
1 2 3 4 5
6 7 8 9 10
11 12 13 14
For a complete list of replacement parts, cleaning formulas, and accessories available for your BISSELL deep cleaner please visit www.bissell.com or contact
BISSELL Consumer Services at 800.237.7691.
18 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
W
arranty - BISSELL Big Green Clean Machine
this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. if you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e-mail, telephone, or regular mail as described below.
Limited Five Year Warranty subject to the *eXcePtions and eXclusions identified below, upon receipt of the product bissell homecare, inc. will repair or replace (with new or remanufactured components or products), at bissell’s option, free of charge from the date of purchase by the original purchaser, for five year any defective or malfunctioning part.
see information below on "if your bissell product should require service".
this warranty applies to product used for personal, and not commercial or rental service. this warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the user's guide is not covered.
If your BISSELL product should require service: contact bissell consumer services to locate a bissell authorized service center in your area. if you need information about repairs or replacement parts, or if you have questions about your warranty, contact bissell consumer services.
Website or E-mail: www.bissell.com
Or Call: bissell consumer services
1-800-237-7691
Monday - friday 8 a.m. - 10 p.m. et saturday 9 a.m. - 8 p.m. et
Or Write: bissell homecare, inc.
Po box 3606 grand Rapids, Mi 49501 attn: consumer services bissell hoMecaRe, inc. is not liable foR incidental oR conseQuential daMages of any natuRe associated With the use of this PRoduct. bissell’s liability Will not eXceed the PuRchase PRice of the PRoduct.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY this WaRRanty is eXclusiVe and in lieu of any otheR WaRRanties eitheR oRal oR
WRitten. any iMPlied WaRRanties Which May aRise by oPeRation of laW, including the iMPlied WaRRanties of MeRchantability and fitness foR a PaRticulaR PuRPose, aRe liMited to the one yeaR duRation fRoM the date of PuRchase as descRibed aboVe.
some states do not allow limitations on how long an implied warranty last so the above limitation may not apply to you.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
19
D on't forget to register your product!
Registering is quick, easy and offers you benefits over the lifetime of your product. you’ll receive:
BISSELL Rewards Points automatically earn points for discounts and free shipping on future purchases.
Faster Service supplying your information now saves you time should you need to contact us with questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.bissell.com/registration now!
B
ISSELL consumer services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty on page 11 for details.
20 w w w . b i s s e l l . c o m
©2010 bissell homecare, inc grand Rapids, Michigan all rights reserved. Printed in china
Part number 120-4216
Rev 5/10
Visit our website at: www.bissell.com
scotchgard is a trademark of 3M
8 0 0 . 2 3 7 . 7 6 9 1
Advertisement