Target 78208011 Manual

warwick
narrow console table
fawn brown
style # FKWWNRCNBR
dpci # 249-17-9654
TCIN # 77471734
jet black
style # FKWWNRCNBK
dpci # 249-17-9116
TCIN # 78054358
oxford white
style # FKWWNRCNWH
dpci # 249-17-8871
TCIN # 78208011
natural
style # FKWWNRCNNT
dpci # 249-17-2030
TCIN # 80789808
>> assembly instructions
© 2020 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re confident you won’t need it.
before you begin
1.
2.
3.
4.
Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
Use the carton as a working surface to prevent product damage during assembly.
Read through and review assembly steps.
Gather all tools prior to assembly.
tools needed
2
table of contents
introduction
hardware
parts list
how to use the cam lock system
assembly
2
4
5
6
7-12
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.
3
hardware
4
(H1) x 22
wooden dowel
(H2) x 12
cam bolt
(H3) x 12
cam
(H4) x 4
bolt
(H5) x 4
lock washer
(H6) x 4
washer
(H7) x 1
allen wrench
(H8) x 1
small pan head screw
(H9) x 1
wall strap
(H10) x 1
wall anchor
(H11) x 1
wall screw
(H12) x 2
washer
exploded diagram
ITEM
DESCRIPTION QUANTITY
1
top panel
1
2
left side frame
1
3
right side frame
1
4
bottom panel
1
5
back panel
2
5
how to use the cam lock system
2.
1.
Screw cam bolt into panel
3.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
4.
Rotate cam(s) clockwise 180° to
lock panels together
6
Push cam into panel - arrow feature
on cam top points to panel edge
5.
Panels should be tight against each
other and connection should be rigid
step 1: attach back panel to top panel
(H1) x 3
(H2) x 2
wooden dowel cam bolt
(H3) x 2
cam
1.1. Carefully tap small wooden dowels into place on top panel. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down flush into top panel.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
7
step 2: attach right side frame to top / back panel
(H1) x 4
(H2) x 4
wooden dowel cam bolt
(H3) x 3
cam
2.1. Carefully tap small wooden dowels into place on side frame. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down flush into side frame.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
8
step 3: attach back panel to bottom panel
(H1) x 3
(H2) x 2
wooden dowel cam bolt
(H3) x 2
cam
3.1. Carefully tap small wooden dowels into place on bottom panel. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down flush into bottom panel.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
9
step 4: attach bottom panel to right side frame
(H1) x 4
(H3) x 1
wooden dowel cam
(H4) x 2
bolt
(H5) x 2
lock washer
(H7) x 1
allen wrench
(H6) x 2
washer
4.1. Carefully tap small wooden dowels into place on side frame. Leave 1/2” of the dowels sticking out.
4.2. Align bolts with pre-drilled holes in bottom panel.
4.3. Do not over tighten bolts.
10
step 5: attach remaining side frame
(H1) x 8
(H2) x 4
wooden dowel cam bolt
(H3) x 4
cam
(H4) x 2
bolt
(H6) x 2
washer
5.1.
5.2.
5.3.
5.4.
5.5.
(H5) x 2
lock washer
(H7) x 1
allen wrench
Carefully tap small wooden dowels into top and bottom panels. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down flush into side frame.
Refer to page 6 for instructions on how to use the cam lock system.
Align bolts with pre-drilled holes in bottom panel.
Do not over tighten bolts.
11
step 6: attach anti-tip
Position against wall
(H9)
(H10)
Mark position of strap hole on wall
Drill 1/4” hole
Tap in wall anchor
(H8) (H12)
(H11)
(H8) x 1
(H9) x 1
pan head screw wall strap
12
(H10) x 1
wall anchor
(H11) x 1
wall screw
(H12) x 2
washer
Fasten anti-tip strap with wall screw
provided
(H12)
60
lbs
.
55
lbs
.
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
13
© 2020 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.