Setup and Print Guide – Illustrator CS~CS5

Setup and Print Guide – Illustrator CS~CS5
Ricoh GX7000 ­— Mac OS X — ICC Profile
Setup and Print Guide –
­ Illustrator CS~CS5
IMPORTANT: Before proceeding, please be sure you have the correct ICC Profile installed. For
assistance with ICC Profile installation, refer to the Installation Guide.
Adobe Illustrator’s color space needs to be set to the working space in which the ICC profile was created. This
allows for a more accurate screen display of your images. However, the accuracy of the displayed image on your
monitor depends more on the quality of the monitor and, more importantly, whether or not it has been calibrated
with the Monitor Manufacturer’s ICC profile.
Setup Guide - Adobe Illustrator CS, CS2, CS3, CS4 & CS5
1.)Begin by opening Illustrator. Then, in the menu bar, click Edit > Color Settings (see FIGURE 1).
1
2
FIGURE 1
PAGE 1 of 13 >>
v20131024
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 2:13)
2.)The Color Settings window should now be open (see FIGURE 2). Match your settings to the ones shown below:
A
K
B
sRGB IEC61966-2.1
C
D
E
F
G
H
I
J
FIGURE 2
A.Check Advanced Mode
B.
RGB: sRGB IEC61966-2.1
C. CMYK: U.S. Web Coated (SWOP) v2
D.
RGB:
Convert to Working RGB
E.
CMYK: Preserve Embedded Profiles
F.Profile Mismatches: Check Ask When
Opening and Check Ask When Pasting
G. Missing Profiles: Check
H.Engine: Adobe (ACE)
Ask When Opening
I.Intent: Perceptual
J.Check
Use Black Point Compensation
K.Once your settings match, click Save. This
will open the Save window (see FIGURE 3)
PAGE 2 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 3:13)
Name your new preset in the Save As field and click Save when complete (see FIGURE 3).
1
2
FIGURE 3
Congratulations! The Adobe Illustrator RGB Working Space setup is now complete.
Print Guide - Adobe Illustrator CS, CS2, CS3, CS4 & CS5
Begin by opening an image in Illustrator.
1.)
When opening or importing images in Illustrator, you may encounter a Missing Profile or
Embedded Profile Mismatch warning. For the Missing Profile instance, select the radio button for
Assign current working space: sRGB IEC61966-2.1 and click OK to continue (see FIGURE 4A).
For the Embedded Profile Mismatch instance, select Convert document’s colors to the working
space and click OK to continue (see Figure 4B).
A
A
FIGURE 4A
B
FIGURE 4B
B
NOTE: Always choose to assign or convert to sRGB IEC61966-2.1.
PAGE 3 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 4:13)
2.)
Once an image has been opened, you will need to ensure that RGB color mode has been selected.
Do this by clicking File > Document Color Mode > RGB Color. A check mark should now be
visible beside RGB Color (see FIGURE 5).
1
2
3
FIGURE 5
3.)
Once your image is ready to print, in the menu bar, click File > Print. This will open the Print window (see FIGURE 6). Match your settings to the ones shown below:
A
C
B
FIGURE 6
A. Click the drop-down arrow
and select GelSprinter GX7000
B. Click the drop-down arrow
and select Size: Defined by Driver
C.Click Color Management. This will open the Color Management window (see FIGURE 7).
PAGE 4 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 5:13)
4.)
Match your settings to the ones shown below: (see FIGURE 7)
sRGB IEC61966-2.1
A
B
sRGB IEC61966-2.1
C
D
E
19.
FIGURE 7
A. Click the drop-down arrow
and select Color Handling: Let Illustrator determine colors
B. Click the drop-down arrow
and select sRGB IEC61966-2.1
C. Click the drop-down arrow
and select Rendering Intent: Perceptual
D. When the correct settings have been entered, click Page Setup (see FIGURE 7). This will open
the Page Setup window (see FIGURE 8). Select the GelSprinter GX7000, adjust the paper size
according to the transfer paper size being used and click OK. Clicking OK will return you to the
print window (see FIGURE 7).
1
2
FIGURE 8
3
E.Click Printer... to continue (see FIGURE 7).
PAGE 5 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 6:13)
5.)Once Printer has been selected, the following Print window will appear (see FIGURE 9).
Remember to Mirror the image before printing. You are able to do this within the OEM printer driver
or you may choose to manually mirror each image within Illustrator. To mirror the image using the
printer driver, Check Flip horizontally (see FIGURE 9).
1
FIGURE 9
6.)Click the drop-down arrow
and select Color Matching (see FIGURE 10).
GelSprinter GXe3300N
GelSprinter GX 7000
1
2
FIGURE 10
PAGE 6 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 7:13)
7.)In the Color Matching window, select Color Sync. Then select the Sawgrass profile: sg_GX7000_IQr_RGB_v2 (see FIGURE 11).
GelSprinter GX 7000
A
sg_GX7000_IQr_RGB_v2
B
FIGURE 11
8.)Click the drop-down arrow
and select Paper Feed (see FIGURE 12).
GelSprinter GX 7000
1
2
FIGURE 12
PAGE 7 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 8:13)
9.)In the paper feed window you are able to select the printer’s paper source. We recommend using
Auto Select unless you have purchased a Bypass Tray. For those users printing with a Bypass Tray,
you will instead select Bypass Tray (see FIGURE 13).
1
2
FIGURE 13
and select Printer Features (see FIGURE 14). This will open the Print
10.)Click the drop-down arrow
Features window (see FIGURE 14).
1
2
FIGURE 14
PAGE 8 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 9:13)
11.)Match your settings to those shown below: (see FIGURE 15)
A
B
C
D
E
FIGURE 15
A. Click the drop-down arrow
and select Color/Black and White: Color
B. Click the drop-down arrow
and select Paper type: Inkjet Plain Paper
NOTE: When choosing Paper Type, you will receive the following window (see FIGURE 16). Click Continue to proceed.
FIGURE 16
C. Click the drop-down arrow
and select Resolution: 600 dpi
D. Click the drop-down arrow
and select Bi-/Uni-directional printing: Unidirectional
E. Click the drop-down arrow
and select Economy Color: Off
PAGE 9 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 10:13)
12.)
Click the drop-down arrow
and select Image Adjustments (see FIGURE 17).
1
2
FIGURE 17
13.)Match your settings to those shown below: (see FIGURE 18)
A
B
FIGURE 18
A. Click the drop-down arrow
and select Dithering: Use error diffusion
B. Click the drop-down arrow
and select Color profile: Off
PAGE 10 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 11:13)
14.)
Click the drop-down arrow
and select Printer Configuration (see FIGURE 19).
1
2
FIGURE 19
15.)Match your settings to those shown below: (see FIGURE 20)
A
B
C
D
FIGURE 20
A.Check
Do not print blank pages
B.Check
Quick Paper Feed
C.Check
Unidirectional print when selector is Envelope
D. Click the drop-down arrow
and select Sheet-dry print delay in duplex: Off
PAGE 11 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 12:13)
16.)To save your new preset, click the drop-down arrow
and select Save As.... (see FIGURE 21)
NOTE: It is very important not to skip this step of saving the preset. If the preset if not saved,
subsequent prints will not be correct because the color management settings established through
this process will not be properly utilized by Adobe Illustrator and the Mac OS.
GelSprinter GX 7000
1
2
FIGURE 21
17.)Name your new preset accordingly and click OK when complete (see FIGURE 22).
GelSprinter GX 7000
1
2
FIGURE 22
PAGE 12 of 13 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 13:13)
18.)Click Print to continue (see FIGURE 23).
FIGURE 23
19.)You can now print your image by clicking Print (see FIGURE 7).
Illustrator setup is now complete. Remember to, if necessary, convert imported graphics to the sRBG working
space, ensure the RGB color mode is checked and select the Gelsprinter GX 7000 along with the Sawgrass
preset each time you print.
For the absolute latest information and updates on all products, materials, processes and/or
procedures relative to all offerings by or through Sawgrass Technologies, Inc., refer to our website:
www.sawgrassink.com
PAGE 13 of 13 >>
PAGE 13 of 13 >>
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement