"user manual"
Bollo NMP-SE Full-HD 1080P
High Definition Media Player
User’s Manual
Shenzhen HD-Horizon Technology Co., Ltd.
http://www.hdhorizon.com
Bollo Full-HD 1080P
I. Bollo NMP-SE Interfaces:
II. Video Connection:
1.
First of all, please check out the video interfaces on your TV. Select the video
interface following the priority order of below:
HDMI > DVI > Component > VGA>Composite
In general, there will be several kinds of video interfaces for the user to choose, the
best is HDMI. HDMI is better than DVI, DVI better than Component, etc. So,
according to selection prioritize above to choose a better interface to connect Bollo
NMP-SE will insure you to obtain best image quality.
2. If the best video interface on your TV is DVI, you need to buy a DVI-HDMI
converter (shown below), which isn’t a standard accessory.
1
Bollo Full-HD 1080P
3. If your TV has neither HDMI nor DVI, please choose the component or VGA interface
to connect Bollo NMP-SE. The component interface is constituted by a set of
red-green-blue three terminals.
4. If your TV only has a composite video interface, we have to recommend you
upgrading your TV. The composite video cable can not transmit high-definition
video. Although there will be video showing on your TV, but the image you saw is a
downgrade video signal.
2
Bollo Full-HD 1080P
III. The audio connection:
1.
If you own AV amplifier, please choose fiber optical or coaxial or HDMI cable to
connect the Bollo NMP-SE to your AV amplifier. HDMI can transmit Video/Audio
in a single cable, the newest AV amplifier own HDMI In/Out ports. If your AV
amplifier own HDMI interfaces, the correct cable connection is as following:
HDMI of the player Æ HDMI IN of AV Amp.
HDMI Out of AV Amp. Æ HDMI IN of TV
The Fiber optical or coaxial cable is used to transmit digital audio signal only.
2.
If you do not have AV amplifier, but the TV connected through a HDMI cable, you
no longer need to connect other audio cable any more.
3.
If you do not have AV amplifier, but the TV is connected through component or
DVI or VGA video cable, you have to connect the stereo audio output of Bollo
NMP-SE to your TV at same time.
4.
If you are using composite cable connecting your TV, please connect the stereo
audio output of Bollo NMP-SE to your TV also.
IV. The hard disk drive (HDD) installation
1. The Bollo NMP-SE can install an internal 3.5" SATA hard disk drive. The maximum
capacity of HDD supported is 1000GB.
2, First, format the HDD by NTFS file system on your PC, create some folders on the
HDD, like Movie, Music, Photo, etc. , then copy files to these folders.
3, Install the hard disk drive into the Bollo NMP-SE.
V. Starting to use
Now, you can power on the player, start to use it.
1, Using TV remote to switch your TV to the correct channel
2. The text "Starting......" will show on the screen when the Bollo NMP-SE begins to
boot.
3. After "Starting......" is completed, the player will enter operation menu. If the menu
doesn’t appear, that mean your TV doesn’t support 720P high-definition video. At
mean time, please Press TV Mode + “0” (zero)(Press TV mode key, release and follow
by key 0 and release) ,the player will enter auto-detecting mode and try a variety of
display resolution until operation menu appears on your TV.
4. After operation menu appeared, you can enjoy high-definition videos now. If you
find that some movies have no sound, please try different sound track by pressing
“AUDIO” key on the remote. The player can directly decode AC3 audio track, DTS
need to be decoded by AV amplifier.
3
Bollo Full-HD 1080P
VI. Networking Playback
The Bollo NMP-SE own a strong networking playback ability. It can easily joint into
your home LAN environment and playback the media files which stored on other
computers in your home. We recommend you to install the myiHome software
which included in the accessory CD.
After you have run the myiHome software and finished the media folds setup, the Bollo
NMP-SE will automatically find out the myiHome and show an icon on the operation
menu as following:
VII. The remote buttons frequently used
4
Bollo Full-HD 1080P
SETUP
Picture color adjusting key
TV MODE Adjusting display resolution, must using with
number keys. When you lost your video display, you
may press key "TV Mode" + "0" (Press TV mode
key,
release
and
follow
by
key
zero
and
release) ,EVO-I will enter display auto-detecting
mode and try different display resolution. TV MODE
+ “7” will set the display resolution to 720P.
RETURN Back to previous menu
SOURCE Back to source menu
ENTER Play or execute single media file. If you like to
continually play the files in the fold, you can use
PLAY key.
Navigator keys controlling cursor to move up/down/left/
right.; It also can carry out jump front or back
functions. Left key is jump back, Right key is jump
front.
INFO
Show the detail information of the media file
which is being played.
Page Up/Down
It also carry out the volume up /
down function
NEXT
Jump to play next file
PLAY
Continually play the files in the fold
ZOOM
Picture size adjust key
SUBTITLE Subtitle adjust key
AUDIO
Change audio track
VIII. How to upgade the firmware of EVO-I ?
1. Downloading firmware software package from http://www.hdhorizon.com
2. Preparing an USB flash disk or other USB storage devices.
3. Unpacking the firmware software to your U-Disk, then plug the U-Disk to the USB
host port of Bollo NMP-SE.
5
Bollo Full-HD 1080P
4. Using files browsing function to find the firmware files:
50-15-080401-14-EGR-402-000.bin
Linda.html
5. executing the Linda.html file by “enter” key, the screen will show following
information:
6. Executing "8634 ES update 50-15-08xxxxx-14-EGR-402-000.bin" , the system will
enter the firmware upgrading program.
6
Bollo Full-HD 1080P
7. Keeping the power on when the Bollo NMP-SE is upgrading. After the upgrading
procedure finished, the system will automatically reboot.
8. You have finished the firmware upgrading, keeping to enjoy it!
VIIII. How to install Syabas NMT software ?
NMT is a LINUX-based operating system software, it will be installed
on the hard drive of Bollo NMP-SE. The installation and use is
relatively more complicated. If you are not familiar with installing
and using a computer, we recommend that you do not have to try
installing the NMT.
If you have installed a hard drive with NTFS file system inside Bollo
NMP-SE, please do a backup before you install NMT. Otherwise you will
lost all the data stored in the hard disk because NMT will reformat
the entire hard drive with LINUX file system EXT.
1. to copy NMT software "syb8634.nmt" to the root of your U disk.
2. To choose the menu: "Setup" -> "Maintenance" -> "NMT Setup Wizard"
by remote control.
3. Follow the screen prompts to complete the installation of NMT
software (Note: We recommend that you choose ext2 file system to
format the hard disk).
4. In the accessory CD,there is an "Ext2_IFS.exe" software, which
is used for windows system to visit the ext2 file system from your
computer. If you like to access the Bollo NMT-SE as an external
hard disk drive through the USB Slave interface, please install
IFS.exe firstly, or you will not see the hard disk drive in the
Bollo NMP-SE.
5. SAMBA and FTP Server default Password:
Samba:
User Name: nmt
Password: 1234
FTP:
User Name: ftpuser
Password: 1234
XI. Parameters of Bollo NMP-SE
Hardware Specifications :
7
Bollo Full-HD 1080P
Hardware
z
CPU:SIGMA DESIGNS SMP8635
z
MIPS 300MHz
z
DDR-1 DRAM support:64-bit 256MB
z
External NOR Flash Support:16-bit 256MB
z
Audio DSPs:300MHz
Video Output :
z
HDMI 1.3
z
Component (Y/Pb/Pr)
z
VGA
z
Composite
Audio Output :
z
HDMI 1.3 (DTS-HD, TrueHD supported)
z
SPDIF Optical
z
SPDIF Coaxial
z
Stereo
Networking :
z
Ethernet interface, 10-baseT/100-baseT
z
IEEE 802.11N Wireless USB network adapter supported
USB :
z
2 x USB 2.0 host
z
1 x USB 2.0 slave
Internal HDD Type:
z
3.5” SATA Ⅰ/Ⅱ Hard disk drive
File System Supported:
z
EXT2 (Linux file system)
z
NTFS/FAT32 (Windows file system)
eSATA:
z
1 x eSATA host
z
1 x eSATA slave
Power Supply:
z
adapter AC100~240V/50~60Hz,DC12V/4A
Remote : Yes
Connectivity Protocol(s) Support :
Protocols :
8
Bollo Full-HD 1080P
z
UPnP AV NMPR v2.1
z
UPnP 1.0 (connect to myiHome Lite)
z
Bonjour
Streaming Application Specifications :
z
Streaming via HTTP protocol over local network or the Internet
z
WMS over HTTP support via the Internet
z
RTSP over HTTP support via the Internet
Media Container :
Video [extension(s)] :
z
ASF/WMV [.asf, .wmv]
z
MOV/MP4 [.mov, .mp4]
z
MPEG2PS [.ps]
z
MPEG2TS [.ts]
z
AVI [.avi, divx]
z
MPG [.mpg, .mpe, .mpeg, .m2v, .vob, .vro]
z
Matroska (.mkv)
Audio [extension(s)] :
z
WAV [.wav, .pcm]
z
ADIF, ADTS [.aac]
z
M4A [.m4a]
z
OGG. [.ogg]
z
ASF/WMA [.asf, .wma]
z
FLAC [.flac]
Subtitle [extension(s)] :
z
MicroDVD [.sub]
z
SubRip [.srt]
z
Sub Station Alpha [.ssa]
z
Sami [.smi]
OSD Language (More Languages will be added soon):
z
English
z
Chinese Simplified
z
Traditional Chinese
z
Russian
z
Spanish
z
Polish
z
Czechic
z
Portuguese
z
Swedish
9
Bollo Full-HD 1080P
Media Codecs :
Video :
z
4 standard definition streams (PAL and NTSC formats) in any of the following format:
H.264, VC-1,MPEG-4 and MPEG-2,MKV,M2TS,TS,AVI
z
One high definition stream 1920 x 1080i(60), 1920 x 1080p (30), 1280 x720p(60)
and one standard definition stream simultaneously
z
H.264 MP/HP @L4.1
z
VC-1/WMV9 [email protected], [email protected]
z
MPEG-4 ASP @L5 1
z
MPEG-2 [email protected] and [email protected]
Audio :
z
MPEG 1/2 Audio Layers I, II, and III (MP3)
z
Dolby Digital(R) (AC-3)
z
DTS
z
PCM
z
MPEG-2/4 AAC LC and HE
z
Microsoft WMA and WMA Pro
z
Supports the audio sampling rates at 8, 16, 22.05, 24, 32, 44.1, 48, and 96KHz
z
Audio samples at 16, 20, 24, and 32 bits per channel
z
FLAC (software decode)
Photo formats :
z
JPEG (software decode)
z
Animated GIF89a, BMP and PNG in browser mode
NAS + Media Server feature :
Protocols :
z
DLNA v1.0 compliance on CTT test tools v1.0.
z
UPnP AV NMPR v2.1
File Upload support :
z
Samba version 3.0.21 (home-use)
z
FTP for Digital Signage (commercial)
Download services :
z
Bit Torrent btpd v0.12
NAS Management system :
z
HDD format
z
HDD partition create, copy, delete
z
File transfer
z
Password protection, etc.
10
Bollo Full-HD 1080P
Proprietary server :
myiHome Lite (detection by Networked Media Tank slim client with UPnP 1.0)
z
Media Player extender :
Supports any other DLNA compliant devices
z
Browser support :
z
HTML 3.2 compliant and partial HTML 4.0 support
z
Partial Javascript 1.5 support
z
Partial CSS2 support
z
Proprietary Consumer HTML support to ease navigation using a remote control
z
Partial Cascading Style Sheet (CSS1)
z
Partial Netscape and IE extensions including exception handling
z
Cookies function support
z
Full graphical frames
z
Local file system implemented as disk on RAM and/or flash memory
z
Fast HTML page and downloaded files caching in RAM disk
z
Automatic local time synchronization with server time
z
GIF87, Animated GIF89a, JPEG, and progressive JPEG image files support
z
Portable Network Graphics (PNG) image files support
z
Ability to support double byte character sets for internationalization effort.
Current supported character sets:
z
English
z
Chinese Simplified (GB2312)
z
Chinese Traditional (Big5)
z
Japanese (ISO-2022JP, Shift-JIS, EUC-JP)
z
Korean (EUC-KR)
z
Hebrew (no right to left alignment)
* Secure Sockets Layer 2.0/3.0, TLSv1 40-bit and 128-bit encryption for secure online
transaction
* Javascript/ECMAScript (ECMA-262) support
Playback feature support :
z
Photo Album (JPEG) with the entire supported audio format as background music
z
Internet Radio supporting Shoutcast server MP3 Internet Radio stream
Playback control
‹
Play/Pause,
‹
Go to (seeking)
‹
Fast Forward/Rewind
‹
Slow Motion (MPEG-1 and MPEG-2 only)
Audio and Video Play List supported
11
Bollo Full-HD 1080P
MP3 playback with album art support
proprietary server (e.g. myiHome Lite), allows playback on multiple platform
(Windows XP, Mac OS and Pocket PC) via an Internet browser
Accessory packing:
z
Remote Control x 1PCS
z
Power adapter 12V/4A x 1PCS
z
AC cable X 1
z
CD-R X 1
z
USB2.0 Cable x 1PCS
z
HDMI Cable x 1PCS
size: 200x200x60mm
@ 2009 HD-Horizon
Shenzhen HD-Horizon Technology Co., Ltd.
http://www.hdhorizon.com
Suite 502, Block 2, Duoli Industrial Park,
No.105, Meihua Rd.,
Shenzhen, GD Province,
China 518057
Subject to change without notice.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement