WADE-8071 User`s Manual

WADE-8071

Mini-ITX Board

User's Manual

Version 1.0

Copyright © Portwell, Inc., 2009. All rights reserved.

All other brand names are registered trademarks of their respective owners.

Preface

Table of Contents

How to Use This Manual

Chapter 1 System Overview....................................................................................................... 1-1

1.1 Introduction.................................................................................................................................. 1-1

1.2 Check List ..................................................................................................................................... 1-1

1.3 Product Specification .................................................................................................................. 1-2

1.3.1 Mechanical Drawing......................................................................................................... 1-5

1.4 System Architecture .................................................................................................................... 1-7

Chapter 2 Hardware Configuration ........................................................................................... 2-1

2.1 Jumper Setting ............................................................................................................................. 2-1

2.2 Connector Allocation .................................................................................................................. 2-3

Chapter 3 System Installation.................................................................................................... 3-1

3.1 Intel® ATOM CPU ...................................................................................................................... 3-1

3.2 Main Memory .............................................................................................................................. 3-1

3.3 Installing the Single Board Computer ...................................................................................... 3-2

3.3.2 Chipset Component Driver.............................................................................................. 3-2

3.3.3 Intel Integrated Graphics GMCH Chip.......................................................................... 3-2

3.3.4 Realtek Gigabit Ethernet Controller ............................................................................... 3-3

3.3.5 Audio Controller ............................................................................................................... 3-3

3.4 Clear CMOS Operation............................................................................................................... 3-3

3.5 WDT Function.............................................................................................................................. 3-4

3.6 GPIO.............................................................................................................................................. 3-5

3.6.1 Pin assignment................................................................................................................... 3-5

3.6.2 WADE-8071 GPIO Programming Guide ....................................................................... 3-6

3.6.3 Example .............................................................................................................................. 3-7

Chapter 4 BIOS Setup Information............................................................................................ 4-1

4.1 Entering Setup.............................................................................................................................. 4-1

4.2 Main Menu ................................................................................................................................... 4-2

4.3 Standard CMOS Setup Menu .................................................................................................... 4-3

4.4 IDE Adaptors Setup Menu......................................................................................................... 4-4

4.5 Advanced BIOS Features............................................................................................................ 4-6

4.6 Advanced Chipset Features ..................................................................................................... 4-10

4.7 Integrated Peripherals .............................................................................................................. 4-12

4.8 Power Management Setup ....................................................................................................... 4-17

4.9 PnP/PCI Configurations .......................................................................................................... 4-20

4.10 PC Health Status...................................................................................................................... 4-21

4.11 Default Menu ........................................................................................................................... 4-22

4.12 Supervisor/User Password Setting ...................................................................................... 4-22

4.13 Exiting Selection ...................................................................................................................... 4-23

Chapter 5 Troubleshooting ........................................................................................................ 5-1

5.1 Hardware Quick Installation ..................................................................................................... 5-1

5.2 BIOS Setting.................................................................................................................................. 5-2

5.3 Ordering Setting .......................................................................................................................... 5-3

5.4 FAQ ............................................................................................................................................... 5-4

Appendix A

Appendix B

Preface

How to Use This Manual

The manual describes how to configure your system board to meet various operating requirements. It is divided into five chapters, with each chapter addressing a basic concept and operation of Single Host Board.

Chapter 1 : System Overview.

Presents what you have in the box and give you an overview of the product specifications and basic system architecture for this series model of single host board.

Chapter 2 : Hardware Configuration.

Shows the definitions and locations of Jumpers and Connectors that you can easily configure your system.

Chapter 3 : System Installation.

Describes how to properly mount the CPU, main memory and Compact Flash to get a safe installation and provides a programming guide of Watch Dog Timer function.

Chapter 4 : BIOS Setup Information.

Specifies the meaning of each setup parameters, how to get advanced BIOS performance and update new BIOS. In addition, POST checkpoint list will give users some guidelines of trouble-shooting.

Chapter 5 : Troubleshooting.

Provides various useful tips to quickly get its running with success. As basic hardware installation has been addressed in Chapter 3, this chapter will basically focus on system integration issues, in terms of backplane setup,

BIOS setting, and OS diagnostics.

The content of this manual is subject to change without prior notice. These changes will be incorporated in new editions of the document.

Portwell

may make supplement or change in the products described in this document at any time.

Updates to this manual, technical clarification, and answers to frequently asked questions will be shown on the following web site : http://www.portwell.com.tw/

System Overview

Chapter 1

System Overview

1.1 Introduction

Portwell Inc., a world-leading innovator in the Industrial PC (IPC) market and develop a new Intel® Mini-ITX board with latest Intel® platform for embedded application. The Portwell WADE-8071 takes advantage of Intel® 45-nanometer Hi-k process technology — the first generation of low-power IA-32 microarchitecture specially designed for Embedded Platform and can support Intel® 945GSE chipset with the ICH7-M, can provide the low power consumption for low profile fanless applications such as POS, ATM, Kiosk, Medical, Panel PC and Digital Signage.

WADE-8071 supports dual display by VGA and 24-bit LVDS. With its display-enriched interface, WADE-8071 can support various multimedia devices and enriched IO interfaces that can supply various USB and COM devices.

WADE-8071 supports SO-DIMM memory slot for DDR2 SDRAM up to 2GB, and comes with PS/2 Keyboard and Mouse header, 2 x RS232, 2 x SATA, 1 x IDE, 1 x

Gigabit Ethernet, 6 x USB2.0 ports. It also support CompactFlash Socket and one

PCIEx1 Slot for embedded application usage.

The WADE-8071 package should cover the following basic items

One WADE-8071 Mini ITX Main Board

One Serial ATA Cable

One SATA Power Cable

One I/O Shield bracket

One Installation Resources CD-Title

If any of these items is damaged or missing, please contact your vendor and keep all packing materials for future replacement and maintenance.

WADE-8071 User’s Manual 1-1

System Overview

Main processor

- Support Intel Atom processor N270

- CPU bus clock: 667/533 MHz

Chipset

Intel® 945GSE and ICH7-M

Main Memory

- Support signal channel DDR2 memory interface

- Up to 2GB DDR2 533 SDRAM on SO-DIMM socket

System BIOS

AWARD BIOS

Expansion Interface

One PCI Express x1 slot

SATA Interface

Two SATA ports

Serial Ports

Support two RS-232 serial ports

IR Interface

N/A

Parallel Port

N/A

USB Interface

Support six USB (Universal Serial Bus) ports (four at rear, two on-board for internal devices)

PS/2 Mouse and Keyboard Interface

Support on board pin header for PS/2 keyboard/mouse

Audio Interface

Connector of Mic-in/Line-out

Real Time Clock/Calendar (RTC)

Support Y2K Real Time Clock/Calendar

Watchdog Timer

- Support WDT function through software programming for enable/disable and interval setting

- Generate system reset

On-board VGA

- Intel 945GSE Integrated GMA950 Graphics device

- Intel DVMT 3.0 supports up to 128MB video memory

WADE-8071 User’s Manual 1-2

System Overview

On-board Ethernet LAN

One Gigabit Ethernet (10/100/ 1000 Mbits/sec) LAN ports

High Driving GPIO

Onboard programmable 8-bit Digital I/O interface

Cooling Fans

Support one 3-pin power connector for system fan

System Monitoring Feature

Monitor system temperature and major power sources, etc

Outline Dimension (L X W):

170mm (6.69”) X 170mm (6.69”)

Power Requirements:

+12V(Board)@1.25A

Configuration:

CPU Type

SBC BIOS

Memory

VGA Card

VGA Driver

LAN Card

LAN Driver

Audio Card

Audio Driver

Chip Driver

USB 2.0 Driver

SATA HDD

Compact Flash

CDROM

Power Supply

System Configuration

Intel® Atom™ N270 1.60GHz (133*12) L2:512K FSB:533MHz

Portwell, Inc. WADE-8071 BIOS Rev.: R1.00.W0.T0 (02192009)

Transcend DDR2 533MHz 2GB (Micron 7WE17 D9HNL)

Onboard Mobile Intel® 845 Express Chipset Family

Mobile Intel® 845 Express Chipset Family Version 6.14.10.4926

Onboard Realtek RTL8111C PCI-E Gigabit Ethernet NIC

Realtek RTL8168C/8111C(P) PCI-E Gigabit Ethernet

Version 5.698.701.2008

Onboard Realtek ALC662 Audio Chipset

Realtek High Definition Audio Version 5.10.0.5735

Intel® Chipset Device Software Version 8.3.0.1013

Intel® 8201G (ICH7 Family) USB2 Enhanced Host Controller

Version 8.2.0.1008

Seagate ST3120813AS 120GB

Apacer 64MB

LITE-ON LH20A1S DVD-ROM

Portwell,Inc PW-330ATXE-12V

WADE-8071 User’s Manual 1-3

System Overview

Programs for loading both CPU & VGA: Run Burning Test V5.3

RUN time: 10 / 30 Minutes.

Item Power ON

Full Loading

10Min

System +12V

USB Loading Test

Full Loading

30Min

1.25A 1.80A 1.85A

5.2 V/ 0.6 A N/A N/A

Operating Temperature:

0°C ~ 55°C

Storage Temperature:

-20°C ~ 80°C

Relative Humidity:

5% ~ 90%, non-condensing

WADE-8071 User’s Manual 1-4

System Overview

1.3.1 Mechanical Drawing

WADE-8071 User’s Manual

[TOP side]

1-5

System Overview

WADE-8071 User’s Manual

[Bottom side]

1-6

System Overview

All of details operating relations are shown in WADE-8071 series System Block

Diagram

WADE-8071 System Block Diagram

WADE-8071 User’s Manual 1-7

Hardware Configuration

Chapter 2

Hardware Configuration

This chapter gives the definitions and shows the positions of jumpers, headers and connector. All of the configuration jumpers on WADE-8071 are in the proper position.

The default settings are indicated with a star sign (

Ì

).

In general, jumpers on the single board computer are used to select options for certain features. Some of the jumpers are designed to be user-configurable, allowing for system enhancement. The others are for testing purpose only and should not be altered. To select any option, cover the jumper cap over (SHORT) or remove (NC) it from the jumper pins according to the following instructions. Here NC stands for

“Not Connect”.

J6 J7

JP2 JP3

J4

J5

J10

J8

JP4

JP5

J13

BZ

JP15

11

J1

15

5

J3

JP1

J2

J9

JP6

JP7

JP8

17

16

4

SPI

8

5

J11

33

32

48

49 64

JP9

J12

JP10

BAT

CPU

JP11

J15

J14

JP13

J16

44

JP14

JP12

J18

J17

43

Figure 2-1 WADE-8071 Top-side Jumper and Connector Locations

WADE-8071 User’s Manual 2-1

Hardware Configuration

JP9 : CMOS Clear

PIN1

JP9

1-2 Short

Function

Normal Operation

Ì

2-3 Short Clear CMOS Contents

JP6 : PANEL BACKLIGHT Selection

PIN1 2

5

6

Pin No.

1-3, 2-4

1-3, 4-6

3-5,2-4

3-5,4-6

Signal Description

5V, Active High

5V, Active Low

12V, Active Low

JP8 : PANEL Voltage Selection

Ì

12V, Active High

PIN1 2

5

6

JP8

2-4 Short

4-6 Short

VCC3

Ì

VCC

3-4 Short +12V

JP8 : Pin Assignments

Function

PIN No.

Signal

Description

1 N/A

2 VCC

PIN No.

Signal

Description

PIN No.

Signal

Description

3 +12V 5 N/A

4 VDDVLDS_IN 6 VCC3

Note:

Wrong voltage selection may damage the LVDS panel.

Please survey LVDS panel’s VDD before setup this jumper setting.

WADE-8071 User’s Manual 2-2

Hardware Configuration

I/O peripheral devices and Flash disk will be connected to these interface connectors.

Connector Function List

Connector Description

J2

J3

J4/J5

J6

J7

J8

J9

J10

J11

J13

JP1

JP2

JP3

JP4

JP5

JP7

JP11

COM Port Connector

POWER DC Jack

USB Connector

MIC Audio Jack

Line_out Audio Jack

RJ45 LAN Connector

POWER DC +12V Connector

CASEOPEN Pin HDR

SO-DIMM DDRII Socket

PCIE x1 SLOT

COM Port Pin HDR

MIC Pin HDR

Line_out Pin HDR

KB/MS Pin HDR

GPIO Pin HDR

Front Panel Pin HDR

BACK LIGHT PWR Connector

JP12/JP14 External +5V/+12V Pin HDR

JP13 External USB Pin HDR

Remark

D-Sub15

D-Sub9

Dual USB/TypeA

Wafer 2mm

DF13-30DP

22P*2

5P*2

Wafer 2mm

Wafer 2mm

5P*2

Wafer 2mm

Wafer 2mm

WADE-8071 User’s Manual 2-3

Hardware Configuration

Pin Assignments of Connectors

J9 : POWER DC +12V Connector

3

4

2

PIN No. Signal Description

1 Ground

2 Ground

3 +12V

4 +12V

J10 : CASEOPEN PIN HDR

2

PIN1

PIN No.

2 Ground

J12 : LVDS Connector

2 PIN1

Signal Description

PIN No. Signal Description

1 LCD1DO0+

3 LCD1DO1+

5 LCD1DO2+

7 LCD1DO3+

9 LCD1CLK+

11 LCD2DO0+

13 LCD2DO1+

15 LCD2DO2+

17 LCD2DO3+

19 LCD2CLK+

21 LCLK1

WADE-8071 User’s Manual

PIN No. Signal Description

2 LCD1DO0-

4 LCD1DO1-

6 LCD1DO2-

8 LCD1DO3-

10 LCD1CLK-

12 LCD2DO0-

14 LCD2DO1-

16 LCD2DO2-

18 LCD2DO3-

20 LCD2CLK-

22 LDATA1

2-4

Hardware Configuration

23 GND

25 GND

27 POWER

29 N/C

JP1 : COM Serial Port

PIN1

2

PIN No.

1 DCD

Signal Description

2 DSR

3 RXD

4 RTS

5 TXD

6 CTS

7 DTR

8 RI

9 Ground

10 Ground

JP2 : MIC Pin HDR

PIN1

PIN No. Signal Description

1 MIC_L

2 Ground

3 MIC_R

4 Ground

JP3 : LINE_OUT Pin HDR

PIN1

PIN No. Signal Description

1 LINE_OUT_L

2 Ground

3 LINE_OUT_R

4 Ground

24 N/C

26 Ground

28 POWER

30 POWER

WADE-8071 User’s Manual 2-5

Hardware Configuration

JP4 : External PS/2 Keyboard/Mouse Pin HDR

PIN1

2

PIN No.

1

Signal Description

Mouse Data

Key ( no pin )

5 Ground

7 Power

9 Mouse CLK

JP5 : GPIO Pin HDR

PIN1

PIN No.

2

Signal Description

Keyboard Data

Key ( no pin )

6 Ground

8 Power

10 Keyboard CLK

2

PIN No. Signal Description

1 GPIO0

3 GPIO1

5 GPIO2

PIN No. Signal Description

2 GPIO4

4 GPIO5

6 GPIO6

7 GPIO3 8 GPIO7

9 Ground 10 +5V

Note:

All General Purpose I/O ports can only apply to standard TTL ± 5% signal level

(0V/5V), and each Fan.

WADE-8071 User’s Manual 2-6

Hardware Configuration

JP7 : Front Panel Pin HDR

PIN1

2

PIN No.

1

Signal Description

5VSBY through 330 ohm

3 N/C

5 PWRLED

7 N/C

9 N/C

11 N/C

13 +5V through 150 ohm

15 HDD_LED#

JP11 : BACL LIGHT PWR Pin HDR

PIN1

PIN No.

2 N/C

Signal Description

4 N/C

6 N/C

8 N/C

10 5VSBY through 1k ohm

12 PWR_ON

14 RESET#

16 Ground

PIN No.

1

Signal Description

BACK LIGHT ENABLE

2 GND

3 +12V

4 GND

5 VCC

WADE-8071 User’s Manual 2-7

Hardware Configuration

JP12/JP14 : External +5V/+12V Pin HDR

4

PIN1

PIN No. Signal Description

1 +12V

2 Ground

3 Ground

4 +5V

JP13 : External USB Pin HDR

PIN1

2

PIN No.

1

Signal Description

5V Dual

3 USB-

5 USB+

7 Ground

Key( no pin )

PIN No.

2

Signal Description

5V Dual

4 USB-

6 USB+

8 Ground

10 N/C

WADE-8071 User’s Manual 2-8

System Installation

Chapter 3

System Installation

This chapter provides you with instructions to set up your system. The additional information is enclosed to help you set up onboard PCI device, handle Watch Dog

Timer (WDT) and operation of GPIO in software programming.

3.1 Intel® ATOM CPU

WADE-8071 onboard uses Intel Atom N270 CPU 1.6GHz processor.

Introducing Intel Atom processor, a new microprocessor designed from the ground up for mobility, with a mobile-optimized chipset. Intel mobile processor innovative design techniques allow faster execution of instructions at lower power.

WADE-8071 provides 1 x 200-pin SO-DIMM sockets which supports 667/533

DDR2-SDRAM as main memory, Non-ECC (Error Checking and Correcting), non-register functions. The maximum memory size can be up to 2GB capacity.

Memory clock and related settings can be detected by BIOS via SPD interface.

For system compatibility and stability, do not use memory module without brand.

Memory configuration can be either one double-sided DIMM in either one DIMM socket or two single-sided SO-DIMM in both sockets.

Watch out the contact and lock integrity of memory module with socket, it will impact on the system reliability. Follow normal procedures to install memory module into memory socket. Before locking, make sure that all modules have been fully inserted into the card slots.

CPU FSB Bandwidth

533MHz 4.2GB/s

Memory Frequency

Single Channel DDR

Bandwidth

667MHz 4.2GB/s

533 MHz 4.2GB/s

Note:

To maintain system stability, don’t change any of DRAM parameters in BIOS setup to upgrade system performance without acquiring technical information.

WADE-8071 User’s Manual 3-1

System Installation

Memory frequency / CPU FSB synchronization

WADE-8071 supports different memory frequencies depending on the CPU front side bus and the type of DDR2 SO-DIMM.

CPU FSB

533 MHz

Memory Frequency

667/533MHz

3.3 Installing the Single Board Computer

To install your WADE-8071 into standard chassis or proprietary environment, please perform the following:

Step 1 : Check all jumpers setting on proper position

Step 2 : Install and configure CPU and memory module on right position

Step 3 : Place WADE-8071 into the dedicated position in the system

Step 4 : Attach cables to existing peripheral devices and secure it

WARNING

Please ensure that SBC is properly inserted and fixed by mechanism.

Note:

Please refer to section 3.3.1 to 3.3.7 to install INF/VGA/LAN/Audio drivers.

3.3.2 Chipset Component Driver

The chipset on WADE-8071 is a new chipset that a few old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows

Operating Systems such as Windows 2000 /XP, please install its INF before any of other Drivers are installed. You can find very easily this chipset component driver in

WADE-8071 CD-title.

3.3.3 Intel Integrated Graphics GMCH Chip

Using Intel® 945GSE GMCH with Media Accelerator (GMA) 950 graphics integrated chipset is aimed to gain an outstanding graphic performance. Shared 8 accompany it to 128MB system DDR2-SDRAM with Total Graphics Memory. This combination makes WADE-8071 an excellent piece of multimedia hardware.

With no additional video adaptor, this onboard video will usually be the system display output. By adjusting the BIOS setting to disable on-board VGA, an add-on

PCI-Express by 1 VGA card can take over the system display.

WADE-8071 User’s Manual 3-2

System Installation

Drivers Support

Please find Springdale GMCH driver in the WADE-8071 CD-title. Drivers support

Windows-2000, Windows XP.

3.3.4 Realtek Gigabit Ethernet Controller

Drivers Support

Please find Realtek RTL8111C LAN driver in /Ethernet directory of WADE-8071

CD-title.

The drivers support Windows 2000 /XP.

LED Indicator (for LAN status)

WADE-8071 provides two LED indicators to report Realtek RTL8111C Gigabit

Ethernet interface status. Please refer to the table below as a quick reference guide.

8111C Color Name of LED

Operation of Ethernet Port

Linked Active

Status

LED

Orange LAN Linked & Active LED

Speed

LED

Orange

Green

LAN speed LED

Giga

Mbps

Orange

100

Mbps

10

Mbps

Green Off

3.3.5 Audio

Please find Realtek ALC662 Audio driver form WADE-8071 CD-title.

The drivers support Windows 2000 /XP.

3.4 Clear CMOS Operation

The following table indicates how to enable/disable Clear CMOS Function hardware circuit by putting jumpers at proper position.

3

2

1

Normal

JP9

1-2 Short

2-3 Short

3

2

1

Clear

Function

Normal Operation

Ì

Clear CMOS contents

WADE-8071 User’s Manual 3-3

System Installation

3.5 WDT Function

The working algorithm of the WDT function can be simply described as a counting process. The Time-Out Interval can be set through software programming. The availability of the time-out interval settings by software or hardware varies from boards to boards.

WADE-8071 allows users control WDT through dynamic software programming. The

WDT starts counting when it is activated. It sends out a signal to system reset or to non-maskable interrupt (NMI), when time-out interval ends. To prevent the time-out interval from running out, a re-trigger signal will need to be sent before the counting reaches its end. This action will restart the counting process. A well-written WDT program should keep the counting process running under normal condition. WDT should never generate a system reset or NMI signal unless the system runs into troubles.

The related Control Registers of WDT are all included in the following sample program that is written in C language. User can fill a non-zero value into the

Time-out Value Register to enable/refresh WDT. System will be reset after the

Time-out Value to be counted down to zero. Or user can directly fill a zero value into

Time-out Value Register to disable WDT immediately. To ensure a successful accessing to the content of desired Control Register, the sequence of following program codes should be step-by-step run again when each register is accessed.

Additionally, there are maximum 2 seconds of counting tolerance that should be considered into user’ application program. For more information about WDT, please refer to Winbond W83627HG-AW data sheet.

There are two PNP I/O port addresses that can be used to configure WDT,

1) 0x2E:EFIR (Extended Function Index Register, for identifying CR index number)

2) 0x2F:EFDR (Extended Function Data Register, for accessing desired CR)

Below are some example codes, which demonstrate the use of WDT.

//Step1. Enter W83627HG configuration registers mode:

outportb(0x2E, 0x87);

outportb(0x2E, 0x87);

//* Step2. Pin89 to be WDTO

outportb(0x2E, 0x2b);

outportb(0x2E + 1, 0x04);

//* Step3. Select logic device 8:

outportb(0x2E, 0x07);

outportb(0x2E + 1, 0x08);

WADE-8071 User’s Manual 3-4

System Installation

//* Step4. Config WDT using second to be unit:

outportb(0x2E, 0xf5);

outportb(0x2E + 1, 0x00);

//* Step5. Set WDT time-out time:

outportb(0x2E, 0xf6);

outportb(0x2E + 1, time_out);

//* Step6. Exit configuration registers mode:

outportb(0x2E, 0xaa);

3.6 GPIO

The WADE-8071 provides 8 programmable input or output ports that can be individually configured to perform a simple basic I/O function. Users can configure each individual port to become an input or output port by programming register bit of I/O Selection. To invert port value, the setting of Inversion Register has to be made. Port values can be set to read or write through Data Register.

3.6.1 Pin

JP5 : General Purpose I/O Connector

PIN No.

1

2

3

4

5

6

7

Signal Description

General Purpose I/O Port 0 (GPIO0)

General Purpose I/O Port 4 (GPIO4)

General Purpose I/O Port 1 (GPIO1)

General Purpose I/O Port 5 (GPIO5)

General Purpose I/O Port 2 (GPIO2)

General Purpose I/O Port 6 (GPIO6)

General Purpose I/O Port 3 (GPIO3)

8 General Purpose I/O Port 7 (GPIO7)

9 Ground

10 +5V

All General Purpose I/O ports can only apply to standard TTL

±

5% signal level

(0V/5V), and each source sink capacity up to 12mA.

WADE-8071 User’s Manual 3-5

System Installation

3.6.2 WADE-8071 GPIO Programming Guide

There are 8 GPIO pins on WADE-8071. These GPIO pins are from SUPER I/O

(W83627GH-AW) GPIO pins, and can be programmed as Input or Output direction.

JP5 pin header is for 8 GPIO pins and its pin assignment as following :

JP5_Pin1=GPIO0:from SUPER I/O_GPIO10 with Ext. 4.7K PH

JP5_Pin2=GPIO4:from SUPER I/O_GPIO14 with Ext. 4.7K PH

JP5_Pin3=GPIO1:from SUPER I/O_GPIO11 with Ext. 4.7K PH

JP5_Pin4=GPIO5:from SUPER I/O_GPIO15 with Ext. 4.7K PH

JP5_Pin5=GPIO2:from SUPER I/O_GPIO12 with Ext. 4.7K PH

JP5_Pin6=GPIO6:from SUPER I/O_GPIO16 with Ext. 4.7K PH

JP5_Pin7=GPIO3:from SUPER I/O_GPIO13 with Ext. 4.7K PH

JP5_Pin8=GPIO7:from SUPER I/O_GPIO17 with Ext. 4.7K PH

<<<<< Be careful Pin9=GND , Pin10=VCC >>>>>

There are several Configuration Registers (CR) of W83627HG-AW needed to be programmed to control the GPIO direction, and status(GPI)/value(GPO). CR00h ~

CR2F are common (global) registers to all Logical Devices (LD) in W83627HG. CR07h contains the Logical Device Number that can be changed to access the LD as needed.

LD7 contains the GPIO10~17 registers.

Programming Guide:

Step1: CR2A_Bit [7.2]. P [1,1,1,1,1,1]; to select multiplexed pins as GPIO10~17 pins

Step2: LD7_CR07h.P [07h]; Point to LD7

Step3: LD7_CR30h_Bit0.P1; Enable LD7

Step4: Select GPIO direction, Get Status or output value.

LD7_CRF0h; GPIO17 ~ 10 direction, 1 = input, 0 = output pin

LD7_CRF2h.P [00h]; Let CRF1 (GPIO data port) non-invert to prevent from confusion

LD7_CRF1h; GPIO17~10 data port, for input pin, get status from the related bit, for output pin, write value to the related bit.

For example,

LD7_CRF0h_Bit4.P0; Let GPIO14 as output pin

LD7_CRF2h_Bit4.P0; Let CRF1_Bit4 non-inverted

LD7_CRF1h_Bit4.P0; Output “0” to GPIO14 pin (J25_Pin6)

LD7_CRF0h_Bit0.P1; Let GPIO10 as input pin

LD7_CRF2h_Bit0.P0; Let CRF1_Bit0 non-inverted

Read LD7_CRF1h_Bit0; Read the status from GPIO10 pin (J25_Pin1)

WADE-8071 User’s Manual 3-6

System Installation

How to access W83627HG CR?

In WADE-8071, the EFER = 002Eh, and EFDR = 002Fh.

EFER and EFDR are 2 IO ports needed to access W83627HG-AW CR.

EFER is the Index Port, EFDR is the Data Port.

CR index number needs to be written into EFER first,

Then the data will be read/written from/to EFDR.

To R/W W83627HG-AW CR, it is needed to Enter/Enable Configuration Mode first.

When completing the programming, it is suggested to Exit/Disable Configuration

Mode.

Enter Configuration Mode: Write 87h to IO port EFER twice.

Exit Configuration Mode: Write AAh to IO port EFER.

3.6.3 Example

void enter_Superio2_CFG(void)

{

outportb(0x2E, 0x87);

outportb(0x2E, 0x87);

} void exit_Superio2_CFG(void)

{

outportb(0x2E, 0xAA);

} void Set_CFG2(unsigned char Addr2,unsigned char Value2)

{

unsigned char d2;

outportb(0x2E, Addr2);

delay(2);

outportb(0x2E +1, Value2);

delay(2);

} unsigned char Get_CFG2(unsigned char Addr2)

{

unsigned char d2;

outportb(0x2E, Addr2);

delay(2);

d2 = inportb(0x2E +1);

delay(2);

return(d2);

}

WADE-8071 User’s Manual 3-7

System Installation int main(void)

{

unsigned char d2;

enter_Superio2_CFG();

/* CR2A B7 = 1 selet GPIO Port 1*/

d2 = Get_CFG2(0x2A);

d2 = (d2 & 0x7F) | 0x80;

Set_CFG2(0x2A, d2);

/* IO test loop 1 */

/* Set GPIO Port 1 of Superio 2 Enable */

Set_CFG2(0x07, 0x07); /* Select logic device 07 of Superio2*/

Set_CFG2(0x30, 0x01); /* Enable GPIO Port 1 of Superio2*/

/* IO test loop 1 */

/* Set GPIO Port 1 of Superio2 Enable */

Set_CFG2(0x07, 0x07); /* Select logic device 07*/

Set_CFG2(0xF0, 0x0F); /* GPIO Port 1 of Superio2 is [ooooiiii], o: output, i:input

*/

Set_CFG2(0xF2, 0x00); /* GPIO Port 1 of Superio2 is non-inversed*/

Set_CFG2(0x07, 0x07); /* Select logic device 07*/

Set_CFG2(0xF1, 0xFF); /* Initial back all GPIO Port1 of Superio 2 to hi */

Set_CFG2(0x07, 0x07); /* Select logic device 07*/

Set_CFG2(0xF1, 0xEF); /* GP14 of Superio2 -> ~GP10 of Superio2 */

Set_CFG2(0x07, 0x07); /* Select logic device 07 of Superio2*/

d2 = Get_CFG2(0xF1); /* get GPIO Port 2 data */

if (d2 == 0xEE )

printf("\n GPIO14->10 test ok");

else

printf("\n GPIO14->10 test fail ");

WADE-8071 User’s Manual 3-8

BIOS Setup Information

Chapter 4

BIOS Setup Information

WADE-8071 is equipped with the AWARD BIOS stored in Flash ROM. These BIOS has a built-in Setup program that allows users to modify the basic system configuration easily. This type of information is stored in CMOS RAM so that it is retained during power-off periods. When system is turned on, WADE-8071 communicates with peripheral devices and checks its hardware resources against the configuration information stored in the CMOS memory. If any error is detected, or the CMOS parameters need to be initially defined, the diagnostic program will prompt the user to enter the SETUP program. Some errors are significant enough to abort the start-up.

Turn on or reboot the computer. When the message “Hit <DEL> if you want to run

SETUP” appears, press <Del> key immediately to enter BIOS setup program.

If the message disappears before you respond, but you still wish to enter Setup, please restart the system to try “COLD START” again by turning it OFF and then

ON, or touch the "RESET" button. You may also restart from “WARM START” by pressing <Ctrl>, <Alt>, and <Delete> keys simultaneously. If you do not press the keys at the right time and the system will not boot, an error message will be displayed and you will again be asked to,

Press <F1> to Run SETUP or Resume

In HIFLEX BIOS setup, you can use the keyboard to choose among options or modify the system parameters to match the options with your system. The table below will show you all of keystroke functions in BIOS setup.

↑↓→ ←

General Help

: Move

+ / - /PU /PD : Value

F1

F2

F5

F6

F7

F9

: General Help

: Item Help

: Previous Values

: Fail-Safe Defaults

: Optimized Defaults

: Menu in BIOS

WADE-8071 User’s Manual 4-1

BIOS Setup Information

Once you enter WADE-8071 AWARD BIOS CMOS Setup Utility, a Main Menu is presented. The Main Menu allows user to select from eleven setup functions and two exit choices. Use arrow keys to switch among items and press <Enter> key to accept or bring up the sub-menu.

Phoenix- AwardBIOS CMOS Setup Utility f f f Advanced Chipset Features f Integrated Peripherals f f

Standard CMOS Features

Advanced BIOS Features

Power Management Setup

PnP/PCI Configurations f PC Health Status

ESC : Quit

F10 : Save & Exit Setup

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

↓ → ←

: Select Item

Time, Date, Hard Disk Type …

Note:

It is strongly recommended to reload Optimal Setting if CMOS is lost or BIOS is updated.

WADE-8071 User’s Manual 4-2

BIOS Setup Information

4.3 Standard CMOS Setup Menu

This setup page includes all the items in standard compatible BIOS. Use the arrow keys to highlight the item and then use the <PgUp>/<PgDn> or <+>/<-> keys to select the value or number you want in each item and press <Enter> key to certify it.

Follow command keys in CMOS Setup table to change

Date

,

Time

,

Drive type

, and

Boot Sector Virus Protection Status

.

Phoenix- AwardBIOS CMOS Setup Utility

Standard CMOS Features

Date (mm:dd:yy)

Time (hh:mm:ss) f IDE Channel 0 Master f IDE Channel 0 Slave f IDE Channel 1 Master f IDE Channel 1 Slave

Thu, Mar 12 2009

10 : 20 : 30

[ST380817AS]

[None]

[None]

[None]

Item Help

Menu Level f

Change the day, month, year and century

[EGA/VGA]

Halt On [All Errors]

Base Memory

Extended Memory

Total Memory

639K

1038336K

1039360K

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Note:

Oblique items are base on memory capacity which user adopts on single board.

Menu Selections

Item

Date

Options

mm:dd:yy

Time

IDE Channel 0

Master hh:mm:ss

Description

Change the day, month, year and century

Change the internal clock

IDE Channel 0

Slave

IDE Channel 1

Master

Options are in its sub menu

Press <Enter> to enter next page for detail hard druve settings

WADE-8071 User’s Manual 4-3

BIOS Setup Information

IDE Channel 1

Slave

Video EGA/VGA

CGA 40

CGA 80

Halt On

MONO

All Errors

Select the default video device

Base Memory

Extended

Memory

Total Memory

639K

N/A

N/A

Select the situation in which you want the BIOS to stop the POST process and notify you

Displays the amount of conventional memory detected during boot up

Displays the amount of extended memory detected during boot up

Displays the total memory available in the system

4.4 IDE Adaptors Setup Menu

The IDE adapters control the IDE devices, such as hard disk drive or CD-ROM drive.

It uses a separate sub menu to configure each hard disk drive.

Phoenix- AwardBIOS CMOS Setup Utility

IDE Channel 0 Master (&Slave)

IDE HDD Auto-Detection [Press Enter]

Item Help

IDE Channel 0 Master [Auto]

Access Mode [Auto]

Menu Level f

To atuo-detect the HDD’s size, head … on this channel

Precomp 0

Landing Zone 38308

Sector 255

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Note:

The oblique items are meaning base on what kind of storage device user employs.

WADE-8071 User’s Manual 4-4

BIOS Setup Information

Menu Selections

Item

IDE HDD

Auto-detection

IDE Channel 0

Master

Options

Press Enter

None

Auto

Manual

Description

Press Enter to auto-detect the HDD on this channel. If detection is successful, it fills the remaining fields on this menu.

Selecting ‘manual’ lets you set the remaining fields on this screen. Selects the type of fixed disk. "User Type" will let you select the number of cylinders, heads, etc.

Note: PRECOMP=65535 means NONE !

Choose the access mode for this hard disk Access Mode

Capacity

CHS, LBA

Large, Auto

Auto Display your disk drive size

Disk drive capacity (Approximated). Note that this size is usually slightly greater than the size of a formatted disk given by a disk checking program.

The following options are selectable only if the ‘IDE Primary Master’ item is set to ‘Manual’

Cylinder

Head

Precomp

Landing zone

Sector

Min=0, Max=65535 Set the number of cylinders for hard disk

Min=0, Max=255 Set the number of read/write heads

Min=0, Max=65535 **** Warning: Setting a value of 65535 means no hard disk

Min=0, Max=65535 ****

Min=0, Max=255 Number of sectors per track

WADE-8071 User’s Manual 4-5

BIOS Setup Information

4.5 Advanced BIOS Features

This section allows you to configure your system for basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security.

Phoenix- AwardBIOS CMOS Setup Utility

Advanced BIOS Features f CPU Feature f Hard Disk Boot Priority

Virus Warning

Quick Power On Self Test

First Boot Device

Second Boot Device

Third Boot Device

Boot Other Device

Boot up NumLock Status

Gate A20 Option

Typematic Rate Setting

[Press Enter]

[Press Enter]

[Disabled]

[Enabled]

[CDROM]

[Hard Disk]

[LS120]

[Enabled]

[On]

[Fast]

[Disabled]

X Typematic Rate (Chars/Sec)

X Typematic Delay (Msec)

Security Option

6

250

[Setup]

APIC Mode

MPS Version Control For OS

[Enabled]

[1.4]

OS Select For DRAM > 64MB [Non-OS2]

Report No FDD For WIN 95 [No]

Small Logo(EPA) Show [Disabled]

Item Help

Menu Level f

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Phoenix- AwardBIOS CMOS Setup Utility

CPU Feature

Delay Prior to Thermal [16 Min]

Limit CPUID MaxVal [Disabled]

C1E Function [Auto]

Execute Disable Bit [Enabled]

Item Help

Menu Level f

CPU C1E Function Select

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

WADE-8071 User’s Manual 4-6

BIOS Setup Information

C1E Function

CPU C1E Function Select.

The choice: Auto, Disabled.

Execute Disabled Bit

When disabled, forces the XD feature flag to always return 0.

The choice: Enabled, Disabled.

Core Multi-Processing

The choice: Enabled, Disabled.

Phoenix- AwardBIOS CMOS Setup Utility

Hard Disk Boot Priority

1. CH0 M. : ST380817AS

2. Bootable ADD-in Cards

Item Help

Menu Level f

Use <

> or <

> to select a device, then press <+> to move it up, or <-> to move it down the list. Press

<ESC> to exit this menu.

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Hard Disk Boot Priority

Select Hard Disk Boot Device Priority. Use <

> or <

> to select a device, then press

<+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.

Virus Warning

Allow you to choose the VIRUS warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep.

Enabled

Disabled

Activates automatically when the system boots up causing a warning message to appear when anything attempts to access the boot sector or hard disk partition table.

No warning message will appear when anything attempts to access the boot sector or hard disk partition table.

WADE-8071 User’s Manual 4-7

BIOS Setup Information

Quick Power On Self Test

Allows the system skip certain tests while booting. This will decrease the time needed to boot the system.

First/Second/Third Boot Device

Select your Boot Device Priority.

The choice: LS120, Hard Disk, CDROM, ZIP 100, USB-FDD, USB-ZIP, USB-CDROM and Disabled.

Boot Other Device

Select your Boot Device Priority.

The choice: Enabled, Disabled.

Boot Up NumLock Status

Select power on state for NumLock.

The choice: Off, On.

Gate A20 Option

Fast-lets chipsets control GateA20 and Normal – a pin in the keyboard controller controls GateA20. Default is fast.

The choice: Normal, Fast.

Typematic Rate Setting

Keyboard repeat at a rate determined by the keyboard controller – when enabled, the typematic rate and typematic delay can de select.

The choice: Disabled, Enabled.

Typematic Rate (Chars/sec)

The rate is which character repeats when you hold down a key.

The choice: 6, 8, 10, 12, 15, 20, 24, and 30. (Default 6)

WADE-8071 User’s Manual 4-8

BIOS Setup Information

Typematic delay (Msec)

The delay before keystrokes begin to repeat.

The choice: 250, 500, 750, and 1000. (Default 250)

Security Option

Select whether the password is required every time the system boots or only when you enter setup.

System

The system will not boot and access to Setup will be denied if the correct password is not entered at the prompt.

Setup

The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt.

APIC Mode

The choice: Enabled, Disabled.

MPS Version Control For OS

The choice: 1.1, 1.4

OS Select For DRAM > 64MB

Select OS/2 only if you are running OS/2 operating system with greater than 64MB of RAM on the system.

The choice: Non-OS2, OS2.

Report No FDD for WIN 95

The choice: No, Yes.

Small Logo (EPA) Show

The choice: Enabled, Disabled.

WADE-8071 User’s Manual 4-9

BIOS Setup Information

4.6 Advanced Chipset Features

This section allows you to configure the system based on the specific features of the

Intel GME965 chipset. This chipset manages bus speeds and access to system memory resources, such as DDR2 SO-DIMM and the external cache. It must be stated that these items should never need to be altered. The default settings have been chosen because they provide the best operating conditions for the system. The only time user might consider making any changes would be if you discovered that data was being lost while during system operation.

Phoenix- AwardBIOS CMOS Setup Utility

Advanced Chipset Features

System BIOS Cacheable

Memory Hole At 15M-16M f PCI Express Root Port Func.

*** VGA Setting ***

On-Chip Frame Buffer Size

DVMT Mode

[Enabled]

[Disabled]

[Press Enter]

[8MB]

[DVMT]

DVMT/FIXED Memory Size [128MB]

Boot Display [CRT]

Panel Scaling [Auto]

Panel Number [640x480 18bits]

Item Help

Menu Level f

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

System BIOS Cacheable.

The choice: Enabled, Disabled.

Memory Hole At 15-16M

The choice: Enabled, Disabled.

WADE-8071 User’s Manual 4-10

BIOS Setup Information

PCI Express Root Port Func.

Phoenix- AwardBIOS CMOS Setup Utility

PCI Express Root Port Func

PCI Express Port 1

PCI Express Port 2

PCI Express Port 3

PCI Express Port 4

PCI Express Port 5

PCI Express Port 6

PCI-E Compliancy Mode

[Auto]

[Auto]

[Auto]

[Auto]

[Auto]

[Auto]

[v1.0a]

Item Help

Menu Level f

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

On-Chip Frame Buffer Size

Users can set the display memory size that shared from main memory.

The choice: 1MB, 8MB.

DVMT Mode

The choice: FIXED, DVMT, BOTH

DVMT/FIXED Memory Size

The choice: 64MB, 128MB, 224MB.

Boot Display

The choice: CRT, LVDS, CRT+LVDS, DVI, TV, CRT+DVI, CRT+TV.

Panel Scaling

The choice: Auto, On, Off.

Panel Number

The choice: 640x480 18bits, 800x600 18bits, 1024x768 18bits, 1280x1024 24bits.

WADE-8071 User’s Manual 4-11

BIOS Setup Information

Phoenix- AwardBIOS CMOS Setup Utility

Integrated Peripherals f OnChip IDE Device f Onboard Device f SuperIO Device

Watch Dog Timer Select

[Press Enter]

[Press Enter]

[Press Enter]

[Disabled]

Item Help

Menu Level f

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Phoenix- AwardBIOS CMOS Setup Utility

OnChip IDE Device

IDE HDD Block Mode [Enabled]

IDE DMA transfer access [Enabled]

On-Chip Primary PCI IDE [Enabled]

IDE Primary Master PIO [Auto]

IDE Primary Slave PIO [Auto]

IDE Primary Master UDMA [Auto]

IDE Primary Slave UDMA [Auto]

On-Chip Secondary PCI IDE [Enabled]

IDE Secondary Master PIO [Auto]

IDE Secondary Slave PIO [Auto]

IDE Secondary Master UDMA [Auto]

IDE Secondary Slave UDMA [Auto]

*** On-Chip Serial ATA Setting ***

On-Chip Serial ATA [Combined Mode]

* SATA PORT Speed Settings Disabled

PATA IDE Mode [Secondary]

SATA Port P0, P2 is Primary

Item Help

Menu Level supports block mode select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support. f

If your IDE hard drive

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

IDE HDD Block Mode

If IDE hard drive supports block mode select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.

The choice: Enabled, Disabled.

WADE-8071 User’s Manual 4-12

BIOS Setup Information

IDE DMA transfer access

The choice: Enabled, Disabled.

On-Chip Primary/ Secondary PCI IDE

The chipset contains a PCI IDE interface with support for two IDE channels. Select

Enabled to activate the primary IDE interface. Select Disabled to deactivate this interface.

The choice: Enabled, Disabled

IDE Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields allow set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased performance. In Auto mode, the system automatically determines the best mode for each device.

The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.

IDE Primary/Secondary Master/Slave UDMA

Ultra DMA/33/66/100 implementation is possible only if IDE hard drive supports and the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus master driver). If your hard drive and system software both support Ultra DMA/33/66/100, select Auto to enable BIOS support.

The choice: Auto, Disabled.

On-Chip Serial ATA

[Disabled]: Disabled SATA Controller. [Combined Mode]: PATA and SATA are combined. Max. of 2 IDE drives in each channel. [Enhanced Mode]: Enable both

SATA and PATA. Max. of 4 IDE drives are supported. [SATA only]: Only enable

SATA.

The Choice: Disabled, Auto, Combined Mode, Enhanced Mode, SATA Only.

PATA IDE Mode

The Choice: Secondary.

WADE-8071 User’s Manual 4-13

BIOS Setup Information

Onboard Device

Phoenix- AwardBIOS CMOS Setup Utility

USB Device Setting

USB 1.0 Controller

USB 2.0 Controller

USB Keyboard Function

USB Mouse Function

Azalia/AC97 Audio Select

[Enabled]

[Enabled]

[Enabled]

[Disabled]

[Auto]

Item Help

Menu Level f

[Enabled] or [Disabled] universal host controller interface for universal serial bus.

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

USB 1.0 Controller

[Enabled] or [Disabled] Universal host controller interface for universal serial bus.

The choice: Enabled, Disabled.

USB 2.0 Controller

[Enabled] or [Disabled] Enhanced host controller interface for universal serial bus.

The choice: Enabled, Disabled.

USB Keyboard/Mouse Function

[Enabled] or [Disabled] Legacy support of USB keyboard or mouse.

The choice: Disabled, Enabled.

Azalia/AC97 Audio Select

[Enabled] or [Disabled] AC97 Audio controller.

WADE-8071 User’s Manual 4-14

BIOS Setup Information

SuperIO Device

Phoenix- AwardBIOS CMOS Setup Utility

SuperIO Device

Onboard Serial Port 1

Onboard Serial Port 2

[3F8/IRQ4]

[2F8/IRQ3]

UART Mode Select [Normal]

X RxD , TxD Active

X IR Transmission Delay

Hi , Lo

Enable

X UR2 Duplex Mode

XUse IR Pins

Half

IR-Rx2Tx2

Item Help

Menu Level f

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Onboard Serial Port 1/Port 2

Select an address and corresponding interrupt for the first and second serial ports.

The choice: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto.

UART Mode Select

This item allows users to select Infrared transmission mode.

IrDA

ASKIR

Select IrDA mode transmission

Select ASKIR mode transmission

Normal

Disable Infrared function

RxD, TxD Active

This item is to configure Infrared transmission rate. Four options are available:

Hi, Hi

Hi, Lo

Lo, Hi

High rate for receiving / High rate for transmitting

High rate for receiving / Low rate for transmitting

Low rate for receiving / High rate for transmitting

Lo, Lo

Low rate for receiving / Low rate for transmitting

IR Transmission Delay

This option will be available when IR is enabled.

The choice: Enabled, Disabled.

UR2 Duplex Mode

The available choices are full duplex mode and half duplex mode

The choice: Full, Half.

WADE-8071 User’s Manual 4-15

BIOS Setup Information

UR2 Duplex Mode

The available choices are full duplex mode and half duplex mode

The choice: Full, Half.

Use IR Pins

The available choices are IR-Rx2Tx2/ RxD2, TxD2.

The choice: IR-Rx2Tx2 / RxD2, TxD2.

Watch Dog Timer Select

This BIOS testing option is able to reset the system according to the selected table.

The choice: Disabled, 10 Sec, 20 Sec, 30 Sec, 40 Sec, 1 Min, 2 Min, and 4 Min.

WADE-8071 User’s Manual 4-16

BIOS Setup Information

4.8 Power Management Setup

The Power Management Setup allows configuration of the system to most effectively save energy while operating in a manner consistent with your own style of computer use.

Phoenix- AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Function [Enabled]

ACPI Suspend Type [S3(STR)]

Run VGABIOS if S3 Resume [Auto]

Power Management [User Define]

Video Off Method

Video Off In Suspend

Soft-Off by PWR-BTTN

Power On by Ring

Wake up by onboard LAN

USB KB Wake-Up From S3

Resume by Alarm

X Date(of Month) Alarm

X Time(hh:mm:ss) Alarm

[DPMS]

[Yes]

[Instant-Off]

[Disabled]

[Enabled]

[Disabled]

[Disabled]

0

0 : 0 :0

** Reload Global Timer Events **

Primary IDE 0

Primary IDE 1

[Disabled]

[Disabled]

Secondary IDE 0

Secondary IDE 1

FDD,COM,LPT Port

PCI PIRQ[A-D]#

[Disabled]

[Disabled]

[Disabled]

[Disabled]

Item Help

Menu Level f

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

ACPI Function

This item allows you to enable/disable the Advanced Configuration and Power

Management (ACPI).

The choice: Enabled, Disabled.

ACPI Suspend Type

To decide which ACPI suspend mode to use.

The choice: S1 (POS), S3 (STR).

WADE-8071 User’s Manual 4-17

BIOS Setup Information

Run VGA BIOS if S3 Resume

The choice: Auto, Yes, No.

Power Management

This category allows selecting the type (or degree) of power saving and is directly related to “HDD Power Down”, “Suspend Mode”.

There are three selections for Power Management, three of which have fixed mode settings.

Min. Power Saving

Max. Power Saving

Minimum power management. Suspend Mode = 1 Hour, and HDD Power Down = 15 Min.

Maximum power management. Suspend Mode = 1 Min., and HDD Power Down = 1 Min.

User Defined

Allows you to set each mode individually. When not disabled, Suspend Mode ranges from 1 min. to 1 Hour and

HDD Power Down ranges from 1 Min. to 15 Min.

Video off Method

This determines the manner in which the monitor is blanked.

V/H SYNC+Blank

Blank Screen

DPMS

This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer.

This option only writes blanks to the video buffer.

Initial display power management signaling.

Video Off In Suspend

This allows user to enable/disable video off in Suspend Mode.

The choice: Yes, No.

Soft-Off by PWR-BTTN

This item allows users to set the time to remove the power after the power button is pressed.

The choice: Instant-Off, Delay 4 Sec.

Power On by Ring

When select “Enabled”, a system that is at soft-off mode will be alert to

Wake-On-Modem signal.

The choice: Enabled, Disabled.

WADE-8071 User’s Manual 4-18

BIOS Setup Information

Wake Up By Onboard LAN

The choice: Disabled, Enabled.

USB KB Wake-Up From S3

The choice: Enabled, Disabled.

Resume by Alarm

This item allows users to enable/disable the resume by alarm function. When

“Enabled” is selected, system using ATX power supply could be powered on if a customized time and day is approached.

The choice: Enabled, Disabled.

Date(of Month) Alarm

When “Resume by Alarm” is enabled, this item could allow users to configure the date parameter of the timing dateline on which to power on the system.

The choice: 0 ~ 31.

Time (hh:mm:ss) Alarm

When “Resume by Alarm” is enabled, this item could allow users to configure the time parameter of the timing dateline on which to power on the system.

The choice: hh (0~23), mm (0~59), ss (0 ~59).

Primary/Secondary IDE 0/1

This item is to configure IDE devices being monitored by system so as to keep system out of suspend mode if the associated device is busy.

The choice: Enabled, Disabled.

FDD, COM, LPT Port

This item is to configure floppy device, COM ports, and parallel port being monitored by system so as to keep system out of suspend mode if the associated device is busy.

The choice: Enabled, Disabled.

PCI PIRQ[A-D]#

This option can be used to detect PCI device activities. If they are activities, the system will go into sleep mode.

The choice: Enabled, Disabled.

WADE-8071 User’s Manual 4-19

BIOS Setup Information

This section describes configuring the PCI bus system. PCI, or

P

ersonal

C

omputer

I

nterconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components.

This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

Phoenix- AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

Init Display First

Reset Configuration Data

Resources Controlled By

X IRQ Resources

[ PCI Slot ]

[Disabled]

[Auto(ESCD)]

Press Enter

PCI/VGA Palette Snoop [Disabled]

** PCI Express relative items **

Maximum Payload Size [4096]

Item Help

Menu Level f

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Init Display First

The choice: PCI Slot, Onboard, PCIEx.

Reset Configuration Data

Default is Disabled. Select Enabled to reset Extended System Configuration Data

(ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the OS cannot boot.

The choice: Enabled, Disabled.

Resource Controlled By

BIOS can automatically configure the entire boot and plug and play compatible devices. If set to Auto, IRQ DMA and memory base address fields can not be selected, since BIOS automatically assigns them.

The choice: Auto (ESCD), Manual.

WADE-8071 User’s Manual 4-20

BIOS Setup Information

IRQ Resources

When resources are controlled manually, assign each system interrupt a type, depending on the type of device using the interrupt.

The choice: Press Enter.

IRQ-3/IRQ-4/IRQ-5/IRQ-7/IRQ-9/IRQ-10/IRQ-11/IRQ-12/IRQ-14/IRQ-15 assigned to.

The choice: PCI Device, Reserved.

PCI/VGA Palette Snoop

Legacy ISA for devices compliant with the original PC AT bus specification, PCI PnP for devices compliant with the plug and play standard whether designed for PCI bus architecture.

The choice: Enabled, Disabled.

Maximum Payload Size.

Default 4096.

4.10 PC Health Status

Phoenix- AwardBIOS CMOS Setup Utility

PC Health Status

CaseOpen# Warning [Disabled]

CPU Warning Temperature

Current System Temp

Current CPU Temperature

System FAN

CPU FAN

[Disabled]

39

47

/ 102

/116

0 RPM

0 RPM

Item Help

Menu Level f

Vbat 3.28

+3.3 V

+12 V

3.32 V

12.22 V

+ 5 V 5.21 V

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

WADE-8071 User’s Manual 4-21

BIOS Setup Information

CPU Warning Temperature

This item allows you to set a temperature above which the system will start the beeping warning. Default setting is disabled. This function will only with “ACPI” power management and “S3 (STR)” suspends type.

The choices : Disabled, 50

/122

, 53

/127

, 56

/133

, 60

/140

, 63

/145

, 66

/151

, 70

/158

.

Selecting “Defaults” from the main menu shows two options which are described below,

Load Fail-Safe Defaults

When <Enter> is pressed, a confirmation dialog box with a message similar to:

Load Fail-Safe Defaults (Y/N) ? N

Pressing ‘Y’ loads the BIOS default values for the most stable, minimal-performance system operations.

Load Optimized Defaults

When <Enter> is pressed, a confirmation dialog box with a message similar to:

Load Optimized Defaults (Y/N) ? N

Pressing ‘Y’ loads the default values that are factory settings for optimal performance system operations.

4.12 Supervisor/User Password Setting

Either supervisor or user password can be setup, or both of then. The differences between are:

Set Supervisor Password :

can enter and change the options of the setup menus.

Set User Password

: just can only enter but do not have the right to change the options of the setup menus. When selecting this function, the following message will appear at the center of the screen to assist you in creating a password.

ENTER PASSWORD

Type the password, up to eight characters in length, and press <Enter>. The password typed now will clear any previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and

WADE-8071 User’s Manual 4-22

BIOS Setup Information press <Enter>. You may also press <Esc> to abort the selection and not enter a password.

To disable a password, just press <Enter> when prompted to enter the password. A message will confirm the password will be disabled. Once the password is disabled, the system will reboot and Setup can be entered freely.

PASSWORD DISABLED

When a password has been enabled, user will be prompted to enter it every time user tries to enter Setup. This prevents an unauthorized person from changing any part of your system configuration.

Additionally, when a password is enabled, you can also require the BIOS to request a password every time your system is rebooted. This would prevent unauthorized use of the computer.

User may determine when the password is required within the BIOS Features Setup

Menu and its Security option (see Section 3). If the Security option is set to “System”, the password will be required both at boot and at entry to Setup. If set to “Setup”, prompting only occurs when trying to enter Setup.

Save & Exit Setup

Pressing <Enter> on this item asks for confirmation:

Save to CMOS and EXIT (Y/N)? Y

Pressing “Y” stores the selections made in the menus in CMOS – a special section of memory that stays on after system off. During subsequnet booting of computer, the

BIOS configures the system according to the Setup selections stored in CMOS. After saving the values the system is restarted again.

Exit Without Saving

Pressing <Enter> on this item asks for confirmation:

Quit Without Saving (Y/N)? N

This allows user to exit Setup without storing in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your computer.

WADE-8071 User’s Manual 4-23

Troubleshooting

Chapter 5

Troubleshooting

This chapter provides a few useful tips to quickly get WADE-8071 running with success. As basic hardware installation has been addressed in Chapter 2, this chapter will primarily focus on system integration issues, in terms of BIOS setting, and OS diagnostics.

5.1 Hardware Quick Installation

DC 12V Power Input

WADE-8071 supports DC12V input only.

Serial ATA and IDE Hard Disk Setting

Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a time; there are total two connectors, J14 and J15. The installation of Serial ATA is simpler and easier than IDE, because SATA hard disk doesn’t require setting up

Master and Slave, which can reduce mistake of hardware installation.

WADE-8071 User’s Manual 5-1

Troubleshooting

It is assumed that users have correctly adopted modules and connected all the devices cables required before turning on DC 12V power. 200-pin DDR2 SDRAM, keyboard, mouse, SATA hard disk, VGA connector, device power cables, ATX accessories are good examples that deserve attention. With no assurance of properly and correctly accommodating these modules and devices, it is very possible to encounter system failures that result in malfunction of any device.

To make sure that you have a successful start with WADE-8071, it is recommended, when going with the boot-up sequence, to hit “DEL” key and enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.

Loading the default optimal setting

When prompted with the main setup menu, please scroll down to “

Load Optimal

Defaults

”, press “Enter” and “Y” to load in default optimal BIOS setup. This will force your BIOS setting back to the initial factory configuration. It is recommended to do this so you can be sure the system is running with the BIOS setting that Portwell has highly endorsed. As a matter of fact, users can load the default BIOS setting any time when system appears to be unstable in boot up sequence.

Auto Detect Hard Disks

In the BIOS => Standard CMOS setup menu, pick up any one from

Primary/Secondary Master/Slave IDE ports, and press “Enter”. Setup the selected

IDE port and its access mode to “Auto”. This will force system to automatically pick up the IDE devices that are being connected each time system boots up.

Improper disable operation

There are too many occasions where users disable a certain device/feature in one application through BIOS setting. These variables may not be set back to the original values when needed. These devices/features will certainly fail to be detected.

When the above conditions happen, it is strongly recommended to check the BIOS settings. Make sure certain items are set as they should be. These include the COM1/

COM2 ports, USB ports, external cache, on-board VGA and Ethernet.

It is also very common that users would like to disable a certain device/port to release IRQ resource. A few good examples are

Disable COM1 serial port to release IRQ #4

Disable COM2 serial port to release IRQ #3

Etc…

WADE-8071 User’s Manual 5-2

Troubleshooting

A quick review of the basic IRQ mapping is given below for your reference.

IRQ#

IRQ #0

IRQ #1

IRQ #2

IRQ #3

IRQ #4

IRQ #5

IRQ #6

IRQ #7

IRQ #8

IRQ #9

IRQ #10

IRQ #11

IRQ #12

IRQ #13

IRQ #14

IRQ #15

System Timer

Keyboard Event

Usable IRQ

COM2

COM1

Usable IRQ

Diskette Event

Usable IRQ

Real-Time Clock

Usable IRQ

Usable IRQ

Usable IRQ

IBM Mouse Event

Coprocessor Error

Hard Disk Event

Usable IRQ

Description

It is then very easy to find out which IRQ resource is ready for additional peripherals.

If IRQ resource is not enough, please disable some devices listed above to release further IRQ numbers.

PER-4110R

One slot PCI-E x1 to PCI-Ex1

WADE-8071 User’s Manual 5-3

Troubleshooting

5.4 FAQ

Symptom: SBC keeps beeping, and no screen has shown.

Solution:

In fact, each beep sound represents different definition of error message.

Please refer to table as following:

Beep sounds

One long beep with one

Meaning

DRAM error short beeps

One long beep constantly DRAM error

One long beep with two short beeps

Beep rapidly

Information & Support

Action

Change DRAM or reinstall it

Change DRAM or reinstall it

Monitor or Display

Card error

Please check Monitor connector whether it inserts properly

Power error warning Please check Power mode setting

Question:I forget my password of system BIOS, what am I supposed to do?

Answer:

You can simply short 2-3 pins on JP9 to clean your password.

Note:

Please visit our technical web site at http://www.portwell.com.tw

For additional technical information, which is not covered in this manual, you can mail to [email protected]

or you can also send mail to our sales, they wull be very delighted to forward them to us.

WADE-8071 User’s Manual 5-4

Appendix A

System Memory Address Map

Each On-board device in the system is assigned a set of memory addresses, which also can be identical of the device. The following table lists the system memory address used for your reference.

Memory Area Size

0000-003F 1K

Device Description

0040-004F 0.3K BIOS Data Area

0050-006F 0.5K Data

9F00-9FBF

= Conventional memory ends at 636K =

3K Extended BIOS Area

A000-AFFF 64K Graphics

B800-BFFF 32K Text

HMA 64K First 64K Extended

WADE-8071 User’s Manual

Appendix B

Interrupt Request Lines (IRQ)

Peripheral devices can use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board.

IRQ#

IRQ 0

Current Use

System ROM

Default Use

System Timer

IRQ 1

IRQ 2

IRQ 3

IRQ 4

System ROM

[Unassigned]

System ROM

System ROM

Keyboard Event

Usable IRQ

COM2

COM1

IRQ 5

IRQ 6

IRQ 7

IRQ 8

[Unassigned]

System ROM

[Unassigned]

System ROM

Usable IRQ

Diskette Event

Usable IRQ

Real-Time Clock

IRQ 9

IRQ 10

IRQ 11

IRQ 12

IRQ 13

IRQ 14

IRQ 15

[Unassigned]

[Unassigned]

[Unassigned]

System ROM

System ROM

System ROM

[Unassigned]

Usable IRQ

Usable IRQ

Usable IRQ

IBM Mouse Event

Coprocessor Error

Hard Disk Event

Usable IRQ

WADE-8071 User’s Manual

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project