Page 1 Page 2 GENERAL DESCRIPTION The transceiver is a micro

Add to my manuals
20 Pages

advertisement

Page 1 Page 2 GENERAL DESCRIPTION The transceiver is a micro | Manualzz
весовое
ALA LI LLL IC AXIAL AAA,
2000000000008 V00000000000000000000
2000000000000 000000000000000000000
0000000000000 000000000000000000000
2000000000000 000000000000000000000
02000000000000000000000000000000000
2000000000000 000000000000000000000
0000000000000 0000000000000000000
РТТ ТУ У У У У У У У ЧУ У ЧР У ЧУ ЧУ ЧУ ЧУ ЧУ ЧУ ЧУ ЧУ ЧУ ЧУ ЧУ У ЧУ ЧУ ЧУ ЧУ ЧУ
GENERAL DESCRIPTION
The transceiver is a micro-miniature multiband FM transceiver with
extensive receive frequency coverage, providing local-area two-way
amateur communications along with unmatched monitoring capability.
We appreciate your purchase of our transceiver, and encourage
you to read this manual thoroughly, and learn about many exciting
features.
Na J
SAFETY TRAINING INFORMATION
Your UV-3R* radio generates RF electromagnetic energy during
transmit mode. This radio is designed for and classified as
а "Occupational Use Only ", meaning it must be used only during
the course of employment by individuals aware of the hazards,
and the ways to minimize such hazards.This radio is NOT
warining intended for use by the "General Population” in an uncontrolled
environment.
This radio has been tested and complies with the FCC RF exposure limits
for "Occupational Use Only" .In addition , your UV-3R* radio complies
with the following Standards and Guidelines with regard to RF energy and
electromagnetic energy levels and evaluation of such levels for exposure
to humans:
Ш FCC OET Bulletin 65 Edition 97-01 Supplement C,Evaluating
Compliance with FCC Guidelines for human Exposure to Radio
Frequency Electromagnetic Fields.
M American Nation Standards Institute(C95.1-1992),IEEE Standard for
Safely Levels with Respect to Human Exposure to Radio Frequency
Electromagnetic Fields,3kHz to 300GHz.
ME American Nation Standards Institute(C95.3-1992),1EEE Recommended
Practice for the Measurement of Potentially Hazardous Electromagnetic
Fields-RF and Microwave.
H The following accessories are authorized for use with this product..
Use of accessories other than those (listed in the instruction) specified
may result in RF exposure levels exceeding the FCC requirements
for wireless RF exposure,
To ensure that your expose to RF electromagnetic energy is
within the FCC allowable limits for occupational use ,always
caution adhere to the following guidelines:
|] DO NOT operate the radio without a proper antenna attached, as this
may damaged the radio and may also cause you to exceed FCC RF
exposure limits. A proper antenna is the antenna supplied with this
radio by the manufacturer or antenna specifically authorized by the
manufacturer for use with this radio.
О DO NOT transmits for more than 50% of total radio use time ("50%duty
cycle"). Transmitting more than 50%of the time can cause FCC RF
exposure compliance requirements to be exceed .The radio is
transmitting when the "TX indicator” lights red .You can cause the
radio to transmit by pressing the "PTT switch .
ALWAYS keep the antenna at least 60cm away from the body when
transmitting.
The information listed above provides the user with the information needed
to make him or her aware of RF exposure, and what to do to assure that
this radio operates with the FCC RF exposure limits of this radio .
Electromagnetic Interference/Compatibility
During transmissions, your UV-3R* radio generates RF energy that can
possibly cause interference with other devices or systems .To avoid such
interference, tum off the radio in areas where signs are posted to do so.
DO NOT operate the transmitter in areas that are sensitive to
electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed
as consequence of their employment provided those persons are fully
aware of the potential for exposure and can exercise control over their
exposure.
The maximum duty cycle in VOX mode is 50%.
SAOFENIL
PRECAUTIONS
® Refer service to qualified technicians only.
® Do not disassemble or modify the transceiver for any reason.
€Do not expose the transceiver under direct sunlight long or to
extremely hot condition.
€ Do not place the transceiver on the unstable surface.
®Keep the transceiver out of dust, moisture, water.
€®Do not operate the transceiver or charge the battery pack under
explosive conditions.
SAFETY
It is important that the operator is aware of and understands
hazards common to the operation of any transceiver.
yf
A\wARNING
Please turn off the transceiver off at the following locations:
D In explosive atmospheres (inflammable gas, dust particles, metallic
powders, grain powders, etc.).
> While taking on fuel or while parking at gasoline service stations.
> Near explosives or blasting sites.
DP In medical institutes or aircrafts.
Na J
changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
SAOFENL
_ CONTENTS _
UNPACKING AND CHECKING EQUIPMENTS -------------- 01
INSTALLATION OF ACCESSORIES ------------------------ 02
BATTERY CHARGING ~~~ ~~ 04
GETTING ACQUAINTED ----------------------—-——— 06
OPERATION -----------------"--"-""0000 00 esse ss 16
ADVANCED OPERATION -----------------------—--———— 16
ADDITIONAL FUNCTIONS AND SETTINGS -------------——- 29
TROUBLESHOOTING GUIDE -------------—---------————- 30
SPECIFICATIONS --------------------— er eenn 31
SAOFENL
_UNPACKING AND CHECKING EQUIPMENTS
Carefully unpack the transceiver. We recommend that you identify
the items listed in the following table before discarding the packing
material. If any items are missing or have been damaged during
shipment, please contact the dealers immediately.
Standard Accessories
С ITEM QUANTITY )
Dual Band Antenna 1
AC Adapter 1
SP.&MIC. 1
Li-ion Battery 1
Drop-in Charging Tray 1
Hand Strap 1
X Instruction Manual 1 В
Antenna AC Adapter SP.EMIC.
“
SAOFENIL
Li-ion Battery Drop-in Charging Tray
Optional Accessories
7
Data Cable(VGA)
E mors И
Hand Strap
_ INSTALLATION OF ACCESSORIES.
ANTENNA INSTALLATION
The supplied antenna provides good results over
the entire frequency range of the transceiver.
However, for enhanced based station medium-
wave and shortwave reception, you may wish to
connect an external antenna, as the supplied
antenna is very small and can not be expected to
provide high performance at these frequencies.
To install the supplied antenna, hold the bottom
end of the antenna and screw it onto the mating
connector on the transceiver until it is snug. Do
not over-tighten by use of extreme force. (See
PIC 1)
“nm
PIC 1
Note:
Never transmit without having an antenna
connected.
When installing the supplied antenna, never hold
the upper part of antenna while screwing it onto
the mating connector on the transceiver.
If using an external antenna for transmission,
ensure that the SWR presented to the transceiver
is 1.5:1 or lower, to avoid excessive feed line loss.
BELT CLIP INSTALLATION
If necessary, install the belt clip into the location
on the back of the battery. (See PIC 2)
Note:
Do not use the glue to fasten the screw, while
installing the belt clip. Otherwise, the acrylic acid
of the glue may damage the battery panel.
SP.&MIC. INSTALLATION
Insert the speaker/microphone plugs into the
SP.&MIC. Jacks of the transceiver. (See PIC 3)
y 03 a
NOTE:
Do not recharge the battery pack if it is fully charged. Doing so may cause
the life of the battery pack to shorten or the battery pack may be damaged.
INSTALLING/REMOVING THE BATTERY PACK
The usage time of Battery Pack is about 8 hours, which is based upon
5% transmit 5% receive 90% standby (standard duty cycle). See following
images:
CAUTION:
1.Do not short-circuit the terminals of the battery or throw the battery
into the fire.
2.Do not disassemble the battery pack yourself.
BATTERY CHARGING
Please charge the new battery pack before using it.
The new or stored (more than two months) battery pack, which can
not reach its full capacity for the first charging. After 2 or 3 times
charging and discharging, it can reach full charge.
JUST SEE THE FOLLOWING INSTRUCTIONS
1.Plug the adapter into an electric socket.
2.Insert the transceiver or battery into the drop-in charging tray.
3.Ensure that the battery's contacts connect with the drop-in charging
tray properly, while the charging is taking place, the light will glow red.
4.After 3 hours charging, the LED indicator will light green which
means the full charge. Now remove the battery or the transceiver from
the drop-in charging tray.
Important Note:
1) Perform the battery charging where the ambient temperature range is
41 F-95*F (+5C-+35C).Charge out of this range could cause damage
to the battery pack.
2) If the charge is not completed in several hours, the battery may be
deteriorated. Do not attempt to forcibly charge the battery, please
contact the dealer.
3) If you do not use the transceiver for a long time, remove the battery
pack from the transceiver, as battery leakage could cause damage to
the transceiver and the battery pack.
4) While in storage, the charge will drain slightly over time and the battery
should be recharged 50% each six months.
05
4 à
GETTING ACQUAINTED THE DEFINITION OF THE CONTROL
A
The main tuning Dial is used for setting the operating a
frequency, and is used for audio volume level, menu
[DIAL] Knob selections, and other adjustments. To rotate this Dial
knob, pull the knob to unlock the mechanical dial lock,
and then rotate the Dial knob.
: Press this switch to transmit, and release it to receive,
[PTT]Switch after your transmission is completed.
er a Hold the TT disable the howsa squelching
action, allowing you to hear very weak signals near the
LCD \. } [VOL/MON]Key background ра level. ы 8
( ) AN TX Indicator Just press the key, then rotate the DIAL knob to adjust
. Press and hold this key for two seconds to toggle the
F/ALERT Switch —{H-127 N [ON/OFF] transceiver's power on and off.
2/88 mun am SP. MIC Just press to activate the ‘Alternate’ key function, such
| 395 ISH . . [F/ALERT] as setting Scanning, Memory Write Mode etc. Press and
PTT Switch MG (25 hold the switch to activate the Alarm function.
иж ин ион нок о В © Go Just press the key, entering into the MENU. Rotate the
DIAL knob, will see different functions setting under the
À EXT DC Jack NU. Press and Hold the key, activate the Key Lock
[MENU/LOCK] | or disable the Key Lock. (Note: After the keypad is locked
the operations of the [F/ALERT], [UV MODE], [LAMP/FM
0] fw] [voL ||) will be Invalid.) | Th A 1
Ts
Г VOL/MON Key Just press to switch the VFO UHF Mode and VHF Mode.
Г [UV/MODE] Press and Hold to switch frequency control between VFO
Г and Memory Systems.
[
Г
ANTENNA Jack > ~N DIALKnob
LAMP/FM Switch-
ON/OFF Key |
U/V MODE Key
N MENU/LOCK Key [LAMP/FM] ms lo light PEL Press and Hold to activate
Press the [F/ALERT], then press [MENU/LOCK], to Activate
F+MENULOCK) | the Searing Function, о | >
— Speaker Press the [F/ALERT], then press [UV/MODE], to Activate
F+[UV/MODE] | the "Memory Write' mode (for memory channel storage).
F+[IDIAL Press [F/ALERT], then rotate the [DIAL] knob, to increase
| ] or decrease the frequency at + 1MHz.
Press [VOL/MON], then rotate the [DIAL] knob, to adjust
МОЧЕ [DIAL] the volume level. y
Microphone
06 | 07
LCD DISPLAY
- disol SF h tai | ногтей tai COMBINATION KEY FUNCTION
© CISpiay Icons appear Wheh eeriain operations are periormed or ceriain 1750Hz Tone Calling:PTT+VOL/MONI for 1 second
specific features are activated. It will help you to know the meaning of
"a м dicator and know how to set ae) g Press and hold in the button [ PTT ] and [ VOL/MONI ] to enter the Tone
Calling Mode(1750Hz). The transceiver send out the signal (1750Hz). Release
IL Ly (ENT
Là YH HH { YH Li co
fc (GE Restore to Default Factory Setting:ON/OFF +
CILA. à - =. VOL/MON for 5 seconds
A voi CE EEE Press and hold the key [ ON/OFF ] + [ VOL/MON ] ,
then Power ON, the transceiver will restore to the
( ICON DESCRIPTION > default factory setting.
Secondary Keypad Active ( Press [F/ALERT] ) Factory Default Setting as:454.000MHz, No "y a
158 Operating Band Number or Memory Channel Number | чб Ч HH
: CTCSS/DCS, Low Output power, Battery Save, 30 ANA
CTCSS Operation 145 090
DCS Operation Volume Level 5, SQ 5, Key Tone ON, other settings
UHF 400-470MHz OFF.
VHF 136-174MHz
FM FM Radio(87-108MHz)
LOW Low/High Output Power
vox VOX Function Active
W Wide/Narrow Bandwidth
a Keypad Lock Active
e Keypad Beeper ON
НОП Battery Indicator
= Repeater Shift Direction
DW Dual Watch Active
ea EII | Audio Volume Level
08 4 09 “
y N 4 à
a SAOFENG
MENU DESCRIPTION
po
Menu Item
Description Settings
1 RXCODE OFF'CTCSS, DCS
2 TXCODE OFF'CTCSS, DCS
3 SQL (Squelch) 0---9
4 LIGHT (LCD Illumination) OFF/ON /Key
5 BEEP (Keypad Beeper) OFF--ON
6 VOX OFF/1---9
7 POWER (RF Output Power) HIGH/LOW
8 DW(Dual Watch/UHF&VHF) ON/OFF
9 STEP 12.5KHz
10 OFFSET 0---37.995/0-—69.995M
11 SHIFT 0/-/+
12 STE (Tail Tone Elimination) ON/OFF
13 W/N (Wide Band/Narrow Band) WIDE/NARROW
14 SAVE (Battery Saver) ON/OFF
15 TOT (Time out Timer) OFF/30/60/90/120/150/180S
16 SCANM (Scan Mode) TO/CO
17 RELAYM (Repeater Sound Response) | ON/OFF
18 BCLO (Busy Channel Lock-out) ON/OFF
19 PRI(Priority Channel Scanning) ON/OFF
Ñá nm
MENU SETTING
Press [ MENU/LOCK ], come to MENU
[01]RXCODE
Press [| MENU/LOCK ] , turn clockwise or
counterclockwise [ DIAL] , come to MENU [02]
TX CODE.
Press [ MENU/LOCK ] , turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [03] SQL.
Press [ MENU/LOCK ] , turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [04] LIGHT.
7 UN NY
EACFENC 37
ra
-
a
LT
=~
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [05] BEEP.
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [06] VOX.
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [07] POWER.
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [08] DW.
4D.
Press [ MENU/LOCK ], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [09] STEP.
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [10] OFFSET.
Press [ MENU/LOCK ], turn clockwise or
counterclockwise
[DIAL] , come to MENU [11] SHIFT.
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [12] STE.
4".
83 _ w Ix
1 Г
310
f Mm
(БОК
сб пот
OFF SE7
PN
ПЕ
1! w UE
ты т ст
SHITE
m
Li
ст a
STE
fins
Liv
Press [ MENU/LOCK ] , turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [13] W/N.
Press [ MENU/LOCK ] , turn clockwise or
counterclockwise
[ DIAL ] , come to MENU[14] SAVE.
Press [ MENU/LOCK ] , turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [15] TOT..
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU[16] SCANM.
“Rn
BADFENG 0 ВАОРЕМЫ
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL ] , come to MENU [17] RELAYM.
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL] , come to MENU [18] BCLO.
Press [ MENU/LOCK], turn clockwise or
counterclockwise
[ DIAL] , come to MENU [19] PRI.
€ Press the key [ UV/MODE ] ,confirm the setting, and EXIT the functions
setting.
Battery Save, Time-out Limit, Width/Narrow, only be changed via program
software.
Under the VFO mode, turn clockwise or counterclockwise [ DIAL ] to
increase or decrease the frequency.
4.
REÍ AY”
OPERATION
POWER ON/OFF
1.Be sure the Battery Pack is installed, and the
battery is fully charged. Connect the antenna
to the top panel ANTENNA jack.
2.Press and hold the key [ ON/OFF ] ,the current
DC supply voltage will appear on the LCD for Л F
2 seconds, and beeps will be heard, the display --}
will resume its normal indication of the operating
frequency.
3.To turn the transceiver off, press and hold the
key [ ON/OFF ] again for one second.
ADJUSTING THE VOLUME LEVEL
Pull the [ DIAL ] knob to unlock the mechanical dial lock, then rotate the
[ DIAL ] knob after press the key [ VOL/MON ] , to set the desired audio
level. Clockwise rotation increased the volume level.
ADVANCED OPERATION
RXCODE
You may sometimes want to hear calls from only specific persons or
groups. In this case, use the selective call allows you to ignore unwanted
calls from other persons who are using the same frequency.
Set the receiving signal according to the below instructions:
16
SAOFENIL
_—
1)Press [ MENU/LOCK] , rotate the [ DIAL ]
knob, come to MENU [1]: RXCODE
2)Then press [ U/V ] key, enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select from OFF /67.0-754N,
press [ MENU/LOCK ] again, to select the code
(Positive or negative), such as 023N---0231.
—» OFF — 67.0 —023N —023I
NOTE:
[CTCSS:67Hz---254.1Hz(50 groups);
DCS:023N-754N(104 groups)]
4)Press [ U/V ] key to save the setting and
EXIT. Press [ MENU/LOCK ] or [ PTT ] ‚EXIT
to normal operation.
TXCODE
Set the transmitting signal according to the below
instructions:
1)Press [ MENU/LOCK] , rotate the [ DIAL]
knob, come to MENU [2]: TXCODE
2)Then press [ U/V ] key, enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select from OFF / 67.0-754N,
press [ MENU/LOCK ] again, to select the
code (Positive or negative), such as 023N---
0231.
— OFF — 67.0 —023N —023I
17
ca
ART
"ca
-—(&
CU ><
CAF
My
SAOFENIL
NOTE:
[CTCSS:67Hz---254.1Hz(50 groups);DCS:
023N-754N(104 groups)]
4)Press [ U/V ] key to save the setting and EXIT.
Press [ MENU/LOCK ] or [ PTT ] , EXIT to
normal operation.
SQL (SQUELCH ADJUSTMENT)
Squelch System allows you to mute the background
noise when no signal being received. The Squelch
system make 'Standby' operation more pleasant,
and significantly reduces battery current
consumption. Please adjust the Squelch level
according to the following instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [3]: SQL
2)Then press [ U/V ] key, come to the default
setting level SQL 5
3)Clockwise or counterclockwise rotation of
[ DIAL] knob to adjust between
0/1/2/3/4/5/6/7/8/9 (Default Squelch level as
5). Select the level at which the background
noise is just eliminated when there is no signal.
Press [ U/V ] key to save the setting.
4)Press [ MENU/LOCK ] or [PTT], EXIT to
normal operation.
18
SAOFENIL
LIGHT(LCD ILLUMINATION ON/KEY/OFF)
UV-3R includes a reddish illumination lamp which
aids in nighttime operation. The red illumination
yields clear viewing of the display in a dark
environment, with minimal degradation of your
night vision. Three options for activating the lamp
are provided:
Key: llluminates the LCD when any key pressed.
ON: llluminates the LCD continuously.
OFF: Disables the LCD lamp.
Here is the procedure for setting up the Lamp
mode:
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [4]: LIGHT.
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of bn
[ DIAL ] knob to set ON/OFF/KEy
4)Press [ UV] key to save the setting.
5)Press [ MENU/LOCK ] or [ PTT], EXIT to
normal operation.
BEEP (KEYPAD BEEPER ON/OFF)
If the Keypad Beeper will inconvenience you
(especially being operated in the silent room), you
may disable the Beeper according to the following
instructions:
19
<a
PI St
LO
~~
nr
SAOFENIL
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [5]: BEEP
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to set ON/OFF
4)Press [ UN ] key to save the setting.
5)Press [ MENU/LOCK ] orPTT ] , EXIT to
normal operation.
(ON-The beeper being activated, LCD displays
icon. OFF-The beeper being disabled.)
VOX(VOICE OPERATED TRANSMISSION)
VOX eliminates the necessity of manually switching
to the transmission Mode each time you want to
transmit. The transceiver automatically switches
to transmission mode when the VOX circuitry
senses that you have begun speaking into the
microphone. Please set according to the following
instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL ]
knob, come to MENU [6]: VOX
2)Then press [ UV ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to set:OFF/1/2/3/4/5/6/7/8/9
4)Press [ UV ] key to save the setting.
20
SAOFENIL
5)Press [ MENU/LOCK ] or [ PTT ] , EXIT to
normal operation.
NOTE:
Grade 7-9: the Most Sensitive VOX Gain Level-
Set under silent conditions.
Grade 4-6: the Medium Sensitive VOX Gain
Level —Set under common conditions.
Grade1-3: the Least Sensitive VOX Gain Level-
Set under too much noise conditions.
When VOX function is activated, the LCD will
display the ICON VOX.
POWER (HIGH/LOW RF OUTPUT
POWER SELECTION)
Select the High/Low RF Output Power, please set
according to the following instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL ]
knob, come to MENU [7]: POWER
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to set: HIGH/LOW
A)Press [ U/V ] key to save the setting.
5)Press [ MENU/LOCK ] or [ PTT ] , EXIT to
normal operation.
When set the LOW output power, the LCD will
display the ICON [ LOW ] , and not display the
ICON [HIGH ] , when set the HIGH output power.
21
=
=
>
CT
=
SAOFENIL
DW (DUAL WATCH FEATURE)
The transceiver's Scanning features include a two-
channel scanning capability, which allows you to
operate between UHF channel and VHF channel
in the VFO mode, while periodically checking a
user-defined channel for activity. If one channel
is received the signal, the scanner will pause on
that channel.
Please activate the DW feature according to the
following instructions:
SAOFENIL
1)Press [ MENU/LOCK ] , rotate the [DIAL ]
knob, come to MENU [9]: STEP
2)Then press [ UN ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the new frequency step
size (12.5KHz).
4)Press [UN ] key to save the setting.
5)Press [ MENU/LOCK J or [PTT], EXIT to
normal operation.
1)Press [ MENU/LOCK ] , rotate the [ DIAL] @ us
knob, come to MENU [8]: DW ~ Jind OFFSET (Repeater Operation)
2)Then press [ U/V ] key to enter the set mode. HF E The UV-3R includes a number of features which
3)Clockwise or counterclockwise rotation of make repeater operation simple and enjoyable.
[ DIAL ] knob to set:OFF (disables the Dual 1)Press [ MENU/LOCK ] , rotate the [DIAL ] Br eT”
Watch featureYON (activates the Dual Watch feature) knob, come to MENU [10]: OFFSET ОР aL E
A)Press [UN ] key to save the setting. 2)Then press [UN ] key to enter the set mode. ла
5)Press [ MENU/LOCK ] or [PTT ] , EXIT to
normal operation.
STEP (Channel Spacing Selection)
The UV-3R's frequency synthesizer provides the
option of utilizing channel steps of 12.5KHz per
step (optional values differ depending on the band
selected). If you need to change the channel step
increments, the procedure to do is very easy.
22
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to set the offset frequency (0—
37.995M/0---69.995M).
4)Press [UNV ] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT], EXIT to
normal operation.
SHIFT (Repeater Shifts)
Depending on the part of the band in which you
are operating, the repeater shift may be either
23
downward (-) or upward (+). One of these icons
WIN (Wide/Narrow Band Selection)
will appear at the top of the LCD when repeater 1)Press [ MENU/LOCK ] , rotate the [DIAL ] y a=
1)Press [ MENU/LOCK ], rotate the [DIAL] SH T Е т 2)Then press [ U/V ] key to enter the set mode. MAE E EI
knob, come to MENU [11]: SHIFT a
3)Clockwise or counterclockwise rotation of
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the repeater shifts: 0/-/+
4)Press [ UV] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT], EXIT to
normal operation.
STE (Tail Tone Elimination)
To eliminate the annoying audio caused by camer
wave disappearing after the transmitter ends the
communication. You should enable the Tail Tone
Elimination. On the contrary, if you want
communication via the repeater, you should disable
the Tail Tone Elimination.
1)Press [ MENU/LOCK ] , rotate the [DIAL ]
knob, come to MENU [12]: STE
2)Then press [ UV ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the STE: ON/OFF
4)Press [ UN ] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT ] , EXIT to
normal operation.
24
[ DIAL ] knob to select the WIDE/NARROW:
4)Press [UN ] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT], EXIT to
normal operation.
SAVE (Battery Saver)
The UV-3R includes a useful Transmit Battery
Saver, which will automatically lower the power
output level when the last signal received was
very strong. For example, when you are in the
immediate vicinity of a repeater station, there
generally is no reason to use the high power output
in order to achieve full quieting access to the
repeater. With the transmit battery saver, the
automatic selection of Low Power operation
conserves battery drain significantly.
To activate the Transmit Battery Saver:
1)Press [ MENU/LOCK ] , rotate the [DIAL ]
knob, come to MENU [14]: SAVE
2)Then press [ UN ] key to enter the set mode.
25
SAOFENIL SAOFENIL
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the SAVE: ON/OFF
you can talk to the station on that frequency, if you
like. To select the scanning mode, please see
4)Press [ UN ] key to save the setting. below:
5)Press [ MENU/LOCK ] or [PTT], EXIT to 1)Press [ MENU/LOCK ] , rotate the [DIAL ] оли ©
normal operation. knob, come to MENU [16]: SCANM IL à Pas {
2)Then press [UN ] key to enter the set mode. Ш
TOT (Time-out Timer)
The TOT Feature provides a safety switch, which
limits transmission time to a preprogrammed value.
This will conserve battery power by limiting the
length of transmissions. The TOT default is 180s.
To adjust the timer, see the instructions below:
1)Press [ MENU/LOCK ] , rotate the [DIAL ]
knob, come to MENU [15]: TOT
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the TOT:
OFF/30S/60S/90S/120S/150S/180S
4)Press [UNV ] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT], EXIT to
normal operation.
SCANM (Scan Mode)
The UV-3R allows you to scan the memory
channels, entire operating band, or a portion of
that band. It will halt on signals encountered, so
26
an
m DON
a e
Ls
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the SCANM: TO/CO
4)Press [UNV ] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT], EXIT to
normal operation.
ELAYM (Repeater Sound Response)
The UV-3R comes with the Repeater Sound
Response feature. When the feature is activated,
the handheld transceiver will hear the sound from
the repeater, that means the handheld transceiver
is working via the repeater. Please see below to
activate the features:
1)Press [ MENU/LOCK ] , rotate the [ DIAL ]
knob, come to MENU [17]: RELAYM
2)Then press [ UN ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the RELAYM: ON/OFF
4)Press [ UN ] key to save the setting.
5)Press [ MENU/LOCK ] or [ PTT ] , EXIT to
normal operation.
27
PEL Aur
SAOFENIL
BCLO (Busy Channel Lock-out)
The BCLO feature prevents the radio's transmitter
from being activated if a signal strong enough to
break through the 'noise' squelch is present. On
a frequency where stations using different CTCSS
or DCS codes may be active. BCLO prevents you
from disrupting their communications accidentally
(because your radio may be muted by its own
Tone Decoder). The default setting for the BCLO
is OFF. The below instruction is the procedure to
activate the BCLO:
1)Press [ MENU/LOCK ] , rotate the [DIAL ]
knob, come to MENU [18]: BCLO
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to select the BCLO: ON/OFF
4)Press [UN ] key to save the setting.
5)Press [ MENU/LOCK ] or [PTT], EXIT to
PRI(Priority Channel Scanning)
1)Press [ MENU/LOCK ] button, then rotate the
[ DIAL ] knob, coming to MENU [19]: PRI.
2)Then press [ UV ] key to enter the setting mode.
3)Clockwise or counterclockwise rotation of [ DIAL ]
knob to set PRI:ON/OFF
4)Press [UN ] key to save the setting.
5)Press [ MODE ] or [ PTT] button to the normal
operation.
28
13 w
-PRT
OF F
SAOFENIL
ADDITIONAL FUNCTIONS AND SETTINGS
MEMORY CHANNEL STORAGE (Memory Channels 01-99)
Store the Memory Channel according to the following instructions:
OSelect the desired frequency while operating in the VFO mode. Be sure to
set up any desired CTCSS or DCS tones, as well as any repeater offset.
OPress [ F/ALERT ] button, then press [UN] key, Channel 01-99
will flash on the LCD, rotate [ DIAL ] knob to store the channel between
channel 01-99.
@Press [ UN ] key to save the setting.
@Repeat the process above, to store other channels.
(Note: Repeater offset frequency should be set via programming software.)
EMERGENCY ALARM FEATURE
Press and hold the [ F/ALERT ] bution about 1/2 seconds, come to the Emergency
Alam Mode, emergency alarm will be heard, press [ PTT ] button, EXIT to normal
operation .
FM RADIO FUNCTION:L/R button on side for 2 seconds
1)Press and hold the button [ L/R ] , come to the FM Radio Mode.
2)Rotate the [ DIAL ] knob to adjust the frequency. (The FM broadcast
coverage is 87.0MHz to 108.0MHz, Frequency step as 100KHz).
3)Then press and hold the [ L/R ] button, EXIT the FM Radio Mode.
4)Press and hold the [ UV ] to switch the FM radio frequency mode
and the FM radio save channel mode.
Saving broadcast frequencies:
In broadcast VFO-Mode: 1.U/V for 3 seconds 2.Select a memory
3.U/V again until the "Beep"
29
>.
a
SAOFENIL
1)Under the FM radio frequency mode, set the frequency you want to save.
2)Press the [ F/ALERT ] button, and then press the [ U/V] button,
01-15 flashes on the LCD display, rotate the [ DIAL ] knob to save it.
3)Press the [ U/V ] button to confirm saving.
In the FM radio mode, the communication between the transceivers
is priority. That means in the FM radio mode, when the signal come,
the transceiver will automatically exit the FM radio mode.
FM RADIO SCANNING
In the FM Radio mode, press [ F/ALERT ] button, then press
[ MENU/LOCK] key to scan the complete band. Clockwise or
counterclockwise rotation of [ DIAL ] knob to scan the band from low
to high or from high to low. When searches the certain channel, the
scanning will stop at the channel. Rotate the [ DIAL ] knob, continuously
to scan from low to high or from high to low. Press any key to exit the scanning.
TROUBLESHOOTING GUIDE
( problems solutions X
No Power Check battery installation and/or replace batteries.
Ce ace OÙ The battery life is over, replace new one.
Can't Communicate i
with Other Group Verify that the frequency and the CTCSS you are
Members using are the same as those of your group members.
Hear the Voice Change your CTCSS for the channel. You also
from Other Groups | need the CTCSS for all the radios in your group.
=
30
SAOFENIL
_ SPECIFICATIONS
(Frequency Range VHF136-174 UHF400-470MHz (Dual Band) |
Channel Capacity 99
Channel Spacing 12.5KHz
Operated Voltage 3.7V
Standard Battery 1500mAh
Battery Life(5-5-90 duty cycle) | 72 hours
Frequency Stability 2.5ррт(-20°С-60°С)
Operated Temperature -30 - +60T
Antenna Impedance 50 Q
Dimension 47mm x 81mm x 23mm
Weight About 130g
R.FPower Rating 2W
Modulation F3E
Spurious Emission =65dB
FM Noise 45dB(W)/42dB(N)
Transmitting Current <1.4A
Sensitivity (12dB SINAD) | 0.2uV
PAPE <-60dB
Audio Output Power@8Q | <1.7V
Receiver Current <400mA
Standby Current <75mA В
31
в,
| В,
DECLARATION OF CONFORMITY
We, FUJIAN NAN'AN BAOFENG ELECTRONICS CO.,LTD. (Address as
Changfu Industrial Zone, Xiamei,Nan'an,Quanzhou,Fujian,China.) hereby
declare our product:
Product Name: Two Way Radio
Brand Name: BAOFENG
Model Number:UV-3R*
is in compliance with the essential requirements and other relevant provisions
of the R&TTE 2006/95/EC, 2004/108/EC and 99/5/EC, and cames the CE
mark accordingly.
Supplementary information:
The product complies with the requirements of:
EN60950-1:2006+A11:2009; EN50332-1:2000
ETSI EN 300 086-1 V1.3.1 (2008-09); ETSI EN 300 086-2 V1.2.1 (2008-09)
ETSI EN 301 489-1 V1.8.1 (2008-04); ETSI EN 301 489-5 V1.3.1 (2002-08)
Date: April 15,2011 Signature: WANG SHAO FENG
FUJIAN NAN'AN BAOFENG ELECTRONICS CO.,LTD.
CHANGFU INDUSTRIAL ZONE, XIAMEI,NAN'AN,QUANZHOU,FUJIAN,CHINA
TEL:+86-595-86752889/86767889 FAX:+86-595-86753889
E-Mail:[email protected] http://www.powerphone.com.cn

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement