Product Manual
HDBaseT 2Gang
Multi-Format Wall Plate
HDMI, VGA with Audio, RS232 Control
and Remote Power Flexibility
S-H-HDVA-2T
USER MANUAL
TABLE OF CONTENTS
Introduction.........................................2
Package Contents................................2
Features.............................................2
Panel Descriptions
Front Panel.........................................3
Rear Panel..........................................4
RS232 Protocol...................................5
Connection and Installation...................6
Specification........................................6
Safety Information................................7
1723 W. 4th Street Tempe Arizona 85281 | P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com
1.
www.covid.com
INTRODUCTION
HDBaseT 2Gang Multi-Panel Wall Plate
The CWP-H-HDVRS-2T is a 2 gang multi-input wall plate with HDBaseT CAT extension. Its ability to convert VGA
with audio to HDMI locally and transmit the signal up to 230ft sets this unit apart from the competition. The
auto selection between VGA and HDMI inputs allows either the VGA or HDMI inputs with an active signal to be
selected for transmission across the HDBaseT connection automatically.
The CWP-H-HDVRS-2T also has a front panel button that allows the users to switch between the VGA and HDMI
inputs when both inputs are connected with an active video source. In this configuration, the HDMI input has
priority over the VGA input after a power reset.
The CWP-H-HDVRS-2T can be powered either by a local DC power adapter or remotely via the HDBaseT
connection.
PACKAGE CONTENTS
• 1×MVP-VH-T-S1
• 1×24V 1A DC power adapter
FEATURES
• Transmit VGA with Audio or HDMI up to 1080p@60Hz 36bit up to 230ft over one Cat 5e/6/7 cable
• Support HDMI 4K x 2K (30hz) and 3D
• HDCP Compliant
• Pass through EDID for VGA and HDMI
• Auto switching of output for either VGA or HDMI input;
• Button and RS232 control for signal switching between VGA and HDMI inputs,RS232 command could
be sent by local RS232 port or through the HDBaseT receiver
• Remotely or Locally Powered
• Status LED for all connections on front
• US 2 GANG and European standard
1723 W. 4th Street Tempe Arizona 85281 | P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com
2.
www.covid.com
PANEL DESCRIPTION
1.
5.
2.
6.
3.
7.
4.
FRONT PANEL
1. VGA Input: Connect to VGA source.
2. VGA Indicator: LED blinking = VGA signal input detected; LED solid = VGA input is the active output.
3. LINK LED for HDBT connection: LED blinking means cat cable connection available; LED always on
means there is video signal input and output.
4. Analog Audio Input: Connect to audio source.
5. HDMI Indicator: LED blinking = HDMI signal input detected; LED solid = HDMI input is the active output.
6. HDMI Input: Connect to HDMI source.
7. Signal Switch Button: Press to change the input signal between VGA and HDMI.
1723 W. 4th Street Tempe Arizona 85281 | P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com
3.
www.covid.com
PANEL DESCRIPTION
1.
2.
3.
4.
REAR PANEL
1. Firmware Update USB port
2. RS232 Port
3. Power input
4. HDBaseT CATX
1723 W. 4th Street Tempe Arizona 85281 | P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com
4.
www.covid.com
RS232 PROTOCOL
Commands
& - Command, $ - Query, ^ Response
<cr> = 0x0D Hex / 13 Decimal
Command
String
Information
Example
Example String
Example
Response
Route Command
&Ra<cr>
A=V or H;
V mean VGA,
H mean HDMI.
Route VGA Input to
HDBT Output
&RV<cr>
^RV<cr> OR No
VGA Signal Input
Query Active Route
$R<cr>
$R<cr>
^RV<cr>
Set RS232 Port
Baud Rate to
96008N1
&B96008N1<cr>
^B96008N1<cr>
a=baud
600,19200,38400
b=bits,parity, s
top=8N1,8E1,801
Baud Rate Setup
Command
&Bab<cr>
Query Baud Rate
$B<cr>
Response shows
38400 8N1
$B<cr>
^B384008N1<cr>
$FM<cr>
Response shows
38400 8N1
$FM<cr>
^FM-1.0.0<cr>
Query Firmware
Note:
If the command could be sent by local RS232 port or remote HDBaseT receiver RS232 port, the
response string will be sent back to the RS232 port accordingly.
1723 W. 4th Street Tempe Arizona 85281 | P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com
5.
www.covid.com
CONNECTION AND INSTALLATION
Specification
Video
HDMI Compliance
HDMI 3D
VGA Compliance
VESA
HDCP Compliant
Yes
Distance
Up to 230ft on CAT6a UTP
Max Resolution
HDMI:4K x 2K under 130ft
Color Depth
HDMI:36bit
Connectors
Connectors
(1) HDMI in,(1)VGA, (1)DC3.5,(1)Cat
Mechanical
Dimensions
US:2 GANG European: 172 x 86 mm
Weight
0.49lbs[220g]
Power
Power Supply
24V 1A
Environmental
Operation
Temperature
32~131°F [0~55°C]
Storage Temperature
-4~185°F [-20~85°C]
Relative Humidity
5~95% RH [no condensation]
1723 W. 4th Street Tempe Arizona 85281 | P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com
6.
www.covid.com
SAFETY INFORMATION
To reduce the risk of electric shock, do not expose this product to rain or moisture.
Do not modify the wall plug. Doing so will void the warranty and safety features.
If the wall plug does not fit into your local power socket, hire an electrician to replace
your obsolete socket.
This equipment should be installed near the socket outlet and the device should be easily
accessible in the case it requires disconnection.
1723 W. 4th Street Tempe Arizona 85281 | P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com
7.
www.covid.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising