luxcam user manual

luxcam user manual
Congratulations on your purchase of this product.
EN
IT
1
2
4
7
*/
3
5
8
VCALL
6
0
9
#/
LUXCAM
USER MANUAL
Read this manual carefully and keep it in a safe place for future reference.
This manual contains proprietary information, protected by copyright. All rights reserved.
© Copyright 2015 Luxcam S.A.
TABLE OF CONTENTS
Device layout
3
Package contents
4
System requirements
5
Product features
6
Hardware
8
Software
9
Technical specifications
11
DEVICE LAYOUT
USB port
1
2
4
7
*/
3
5
8
OK
6
0
9
VCALL card
Network Protection Recording Alarm
#/
3
PACKAGE CONTENTS
Unpack carefully. Electronic components can be damaged if improperly
handled or dropped.
The package should contain the following items. If anything is missing or
appears damaged, contact your dealer immediately.
1.1.
Packing list
· Vcall camera
· Ethernet cable
· Power adapter (5V)
· Quick install guide
· Wireless antenna
Note: Please use only the power adapter supplied with the Luxcam otherwise
the product may be damaged.
4
SYSTEM REQUIREMENTS
Smartphone/Tablet:
Browser support:
· IOS 5.0 and later;
· Android 2.1 and later.
-Internet Explorer 7 and later;
-Firefox 3.5 and later;
-Safari 4 and Chrome 8.0 and later.
10/100 mbps ethernet or WiFi network connected to internet (for remote internet access)
5
PRODUCT FEATURES
- Built-in ir led, 60 meters.
AUDIO
INPUT & OUTPUT
- Auto day/night. Ir cut filter.
- Built-in WiFi module for local wireless access.
INFRARED
NIGHT VISION
60 METERS
0 LUX
I/O
- Max. support 32 gb microsd card storage.
- Motion detection.
- Push notifications.
PUSH UP
NOTIFICATION
CMOS
2 MP
ALARM
I/O 1A RELAY
- Same encryption protection used by financial industry, (using rsa/dh/des/md5/sha/crc/base64 encryption algorithm).
- Qr code, each machine has a unique id and password for easy setup.
- Multi-user access.
ALARM
MOTION
DETECTION
- 2way voice intercom, telecommunication level of signal processing (echo cancellation,noise suppression, voice balance).
- Intelligent transmission technology (adaptive bandwidth, dynamic code rate adjustment, voice priority, jitter buffer).
- P2p technology / plug and play / scan to go. No configuration needed (port mapping, dns, ip address settings).
- Realtime video monitoring / framerate. (25 f/s - 720p).
- Display resolution – HD real-time 1280 x 720 px , normal 640 x 360 , half 320 x 180, small 160 x 90.
- H. 264 video stream, suitable for local and cross-platform internet access.
- Alarm input/output port (normally open relay (max 24v-1ah).
6
BRACKET INSTALLATION
CONTENTS INCLUDED:
- Main bracket body
- Adjustable swivel head
- Screws
A) Choose the suitable spot (wall or ceiling).
B) Attach the bracket to the wall or ceiling and secure appropriately using the screws provided.
7
HARDWARE INSTALLATION
Button name
Mark
Number
0-9
*/.button
*/
Function
Input number keyboard
- Short press to decrease the volume during video call or monitor state.
Ctrl shift
Defense
#/
- Short press to delete text during edit state.
- Long press to record/stop during manual record mode.
- Short press to increase the volume during video call or monitor state.
- Short press to switch input method during edit state.
- Long press to cancel operation.
Dial/preview
- Short press to dial video call during standby state.
- Long press to enter real time preview.
Hang up/Exit
- Hang up during video call.
- Go back / exit current state.
- Up and down menu navigation.
- Add or decrease numbers during edit state.
Direction
button
- Play last or next video in playback state.
- Left and right menu navigation.
5V
R o u te r
4
3
2
1
- Play slow/fast video in playback state
C o n n e c te d L A N
N e t w o r k c a b le
Main
menu/confirm
key
OK
-Enter main menu / confirmation.
8
SOFTWARE
To access Vcall in monitor state use your smartphone or tablet to download the LUXCAM app.
LUXCAM VCALL APP
For app manual please visit www.luxcam.eu/support
9
USER INTERFACE
USB
Micro SD
Motion detection
Vcall card
WIFI
Ethernet
Network Issues
Press
OK
button the system main menu is shown as below.
You can operate and set each function in this menu.
General
System
Play
Network
Set the basic parameters of the system
Update and maintain system and show related information
about the system.
Search and play video files.
Set the basic parameters of the network.
Alarm
Set the basic parameters of the alarm.
Record
Set different record modes.
10
TECHNICAL SPECIFICATIONS
11
www.luxcam.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement