User Manual - Swift Hitch
The Original Portable Wireless Back-up Camera System
Patent Pending
Swift Hitch
User's Manual
Portable Wireless Camera System
with Infrared Night Vision, Video Out and
Water Resistant camera.
Model: SH02
Please read this manual carefully and thoroughly before any attempt to
operate this product and retain it for your future reference.
Approval Information
Package Contents
Feature Locations
Charging the Camera and Receiver
Using the Camera
Night Vision
Video Out
Water Resistant
EU Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
Copyright O 2012 Toren Partners, LLC
Thank you for purchasing this wireless camera kit. This product works
at ISM-2.4GHz frequency band, which could be legally used worldwide
without permission. We feel confident that you will be pleased with the
quality and features of this product. The camera features one CMOS
image sensor and a transmitting module to capture the image and
transmits them wirelessly.
The receiver features a receiving module to receive and display the
camera image on a color (LCD) - liquid crystal display.
Notice: This product may cause interferences with other wireless
equipment that operates at 2.4GHz ISM band. Please turn off one of
the equipments to eliminate the interference.
Product Assurance: This camera will emit electromagnetic wave,
just like other wireless products. But its transmitting power is less than
other wireless products such as mobile phones. The 2.4 GHz wireless
camera meets wireless frequency security standards and recommended
indexes while working. These standards and indexes are certificated
by academic organization and represent the cogitative research of the
scientific workers who continuously explore and annotate the involved
fields. So we believe that our products are safe for customers.
This product has a one year limited warranty with an effective date
that begins the date of purchase. Refer to the troubleshooting guide at
the end of this manual for help. Contact the phone number provided in
that section for any additional support. Please retain proof of purchase
receipt for verification. Any attempted disassembly of the product will
void the warranty. Do not return defective product to the retailer.
Approval Information
All our products meet the requirements of approval FCC , and are
granted the FCC certification. They are authorized to bear FCC mark.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
-Reorient or relocated the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions.
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interferences that may cause undesired operation. Changes and
modification not expressly approved by the manufacturer or
registrant of this equipment under Federal Communications
Commissions rules.
DO NOT use this product to violate one's privacy. Monitoring one's
activities without consent is illegal and this product is not designed
and manufactured for such purposes;
. DO NOT put this product near any medical equipment. Radio
waves might potentially cause breakdown of electrical medical
equipment. So this product should be placed at least 1 foot away
from any heart pacemaker. Radio waves might potentially
influence heart pacemaker and lead to respiratory disturbance;
. DO NOT use this product for any illegal activities. We shall not be
responsible for any consequences of illegal acts committed by the
Maintenance Maintenance
© о
а © ©
Do not shake or strike the product;
Keep it dry and dustless and avoid exposing it to direct sunlight;
Avoid putting the product in places where there is constantly changing
temperatures and humidity;
Keep product away from heat sources such as electric heater;
Do not use the camera near caustic chemicals;
Do not use this camera near water, for example, near a bath tub,
wash bowl, kitchen skink, or laundry tub, in a wet basement or near
a swimming pool and the like;
Do not use the camera in the places which are enclosed by metal.
The surrounding metal like aluminum trailer walls may shield the
electromagnetic waves and result in failure of signal reception.
Please obey the local government's environment protection policy;
Please turn off the power when left unused
0. Do not disassemble or repair the camera or receiver doing so might
cause damages to the product and also VOID THE WARRANTY.
Package Contents
This package comes with the following items. Please check whether
they are all included in the packaging box, if one or some is missing,
contact the retailer for replacement.
@ 2.4GHz Wireless Camera X 1 ñ У
(@ Weatherproof cover for Camera X 1
® 2.4GHz Wireless Receiver X 1 0
(9 Lithium Battery for Receiver X 1
(O) "Y" shaped Charging Cable for
Camera & Receiver X 1 „==
(6 Video Out cable for Receiver X 1
4) 5) (6)
@ Suction Cup Mount X 1
® 7/8" Velcro X 1 A я NH
(Velcro for Receiver)
© User Manual X1
Soft Case X1 \ J
© © ©
Feature Locations
1. Camera
Antenna =
Weatherproof __
Infrared y
Lights \ -
= Power Jack
| 4 LED
« Fower ON/OFF
Magnetic »
2. Receiver
Power ON/OFF
Battery Cover
Charge Sockel~ video Out
\_ A
Charging the Camera and Receiver
1. Load a Li-battery to the battery compartment with its polarities matched.
2. Connect the camera/receiver with auto cigarette lighter by {Пе "У"
shaped charging cable. Your camera and receiver are being
charged. À full charge will take about 4 hours for camera and for
receiver respectively.
Auto cigarette lighter
Note: For camera, you need to remove the cover before charging.
3. The camera can work during charging. Press the Power ON/OFF
button to power on (turn on off) the camera, then you can use it.
4. The receiver can also work during charging. Press and hold the
Power ON/OFF button for about three seconds to turn on/off the
receiver. When the receiver is powered on, LCD displays reverse
the image by default. Pressing POWER ON/OFF button momentarily
can switch between reverse and non reverse image.
Notes for camera:
e [fthe battery is exhausted, please recharge it with the charging cable.
* Always keep weatherproof cover fitted regardless of conditions.
Red on when Power off
Power off with
Yellow on when Power on
Notes for receiver:
e A full charge will take about 2.5 hours, which can power the receiver for about
4 hours continuously.
e You are recommended to have the battery fully charged before its first
installation to optimize its life. A
e Do not burn or disassemble the Li-battery.
e Do not short-circuit the battery as it may cause fire or electric shock. AN
Red on when Power off
Power off with
Green on
when Power at reverse
Green flash on at non reverse
Yellow flash and at non reverse
Using the Camera
1. Before using make sure the camera is fully charged. Press the
camera Power ON/OFF button to power on your camera
2. Mount the Magnetic Camera on your tailgate, and then adjust it
to a suitable angle.
3. Watching the back view of the car via the LCD display. Hitch your ride.
Note: the Velcro supplied for those customers who desire to attach the display to vehicle
Night Vision
The built-in Infra-red lights in camera provide night vision for low light
conditions. The Infra-red lights will be automatically activated at night.
The picture will turn to Black & White (monochrome) in Night Vision
Built-in IR lights for about a
15ft Night Vision Range
Video Out
The video out feature is to display the image on the receiver to your
monitor or recording device. You simply plug the video out cable into
the side of the receiver's video out slot and then into your monitor or
recording device.
Water Resistant
The water resistance feature is for the camera only. The camera can
be used in rain but we do not recommend submerging the entire camera
Sensor 1/3" CMOS
Minimum Illumination BLux/F1.2 & OLux
Transmission Power
Power +12\ос
180mA & 230mA
Current 330mA
Time to 4 hours
Time to 10 hours
Vision 15 feet
Dimensions 28 x 90 x 28
2.5" TFT
LCD Resolution 960 x 240
ISM 2.400 GHz - 2.483 GHz
Intermediate 480MHZ
Demodulation FM
Power +12\/ос
Current 240mA
Time to 2 hours
Time to 4 hours
Dimensions (WxDxH)(mm) 80 x 38 x 130
-10 C-50 C/+ F-+
-30°C- C/ F-+
* Actual transmission range may vary according to weather, location, interference or building
* All the specifications are subject to minor change without prior notice.
When you experience the operation problems, please check and try
the following yourself before claiming that it is the defective product
or consulting the experienced technician.
Abnormal Phenomena Possible Reasons/Solutions
IX Check whether the camera/receiver is
connected to power supply and powered on.
No image
Check the distance & blocks.
on image
|” | 1. Interfered with other devices;
2. Check the distance & blocks.
Ghost image
Questions? Call (617) 600-8230
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF