SWITCH PLUG ASSEMBLY
YOUR STICK
Pins
LOCK
Power LED
N
OP
E
Thank you for your purchase of iStick.
1.
This product turns your TV into a smart TV.
You can play video games with it, get social with it.
It expands your tablet experience to a much larger screen.
1. Place power adapter and switchable
plug as diagram indicated.
2. Flip and mount the switchable plug
to the power adapter, and fit the two
holes to the two pins.
3. Rotate switchable plug clockwise to
lock with power adapter.
Ethernet Port
USB 3
PQ Labs reserves the right to change or modify the shape or color of
accessories below at any time without notice.
USB 1 USB 2
TF Card Slot Recovery
Video Output Audio Jack
Switchable Plug
iStick supports most kinds of display devices, e.g.
your home HDTV, your desktop monitor and your
projector.
BEFORE YOU START
You can hide
your iStick at
the backside of
the display as
the illustration
indicates.
USB
Display Cable
Display Device:
*The above illustration is merely for reference, the exact ports are
subject to the A300 version you’ve purchased.
Adhesive Tape
USB Cable
Unlock:
Keep pressing the
OPEN button and
rotate anticlockwise
to unlock.
GLOSSARY
Power Supply Power Switch
Power Adapter
Power plug type shall be variant
by countries or regions.
LOCK
O
Micro USB
N
PE
WHAT’S IN YOUR BOX
Quick Start Guide
3.
Holes
Please check if all the items below are included in your package.
iStick
2.
LOC
K
A300 Series
EN
OP
QUICK START GUIDE
Recommended Area
Your Display
1
2
3
CONNECTING ISTICK
WARRANTY
1. Connect iStick with PQ Labs Multi-Touch screen
(Not provided with iStick, you can connect your
wireless keyboard and mouse instead).
Product Warranty:
PQ Labs warrants its hardware against defects in
materials and workmanship for a period of one (1)
year from the date it is shipped to the customer. In
the event a reseller purchases a product from PQ
Labs and integrates it with a system, the warranty
period begins on the original ship date from PQ
Labs. Warranty is void when failure of the product
results from an accident, abuse, misapplication,
modification, unauthorized maintenance or repair
by the customer. Hazards such as lightning and
flooding, as well as neglect of voltage
specifications are not covered under warranty.
2. Connect iStick with your display device via
display cable provided.
04
03
04
03
Network Cable
3. Connect iStick with power adapter, iStick will
boot up automatically.
4. Choose input signal of your TV.
Mouse
Keybord
USB
USB
USB
Wireless
Keyboard & Mouse
Receiver
Display Cable
Warranty Repair:
5. Set up your Wi-Fi after iStick starts up, and enjoy
your iStick.
VIDEO
PQ Labs Multi-Touch Overlay
VIDEO
COPYING FILES TO ISTICK
1.By using SD card (Not provided with iStick) you
can copy/paste/move your files in the most
convenient way.
2.Connect iStick to PC with micro USB, choose
"turn on USB storage" to use iStick as a
removable storage device.
02
01
USB
SUPPORT
Power Adapter
Your Display
Serial No:DS4200010001
01
Non Warranty Repair:
The customer may return hardware that is not
covered by warranty. A standard repair fee, specific
to the product, is charged for any product that is
repaired outside of the warranty period. Repairs
performed on products out of warranty also carry a
90 days warranty, beginning from the day the
repaired item is shipped back to the customer.
Back Side
02
The customer may return hardware covered by
warranty for repair after getting an RMA number.
Any product covered by warranty is repaired or
replaced, free of charge. All repairs carry a 90 days
warranty, which begins from the day the repaired
item is shipped back to the customer. If the original
warranty expires before 90 days, the repair
remains covered by warranty for the full 90 days.
Website: www.pqlabs.com/support.html
Email: [email protected]
4
5
6
FCC STATEMENT
If the FCC identification number is not visible when the device is installed inside another device, then the outside of the device into which the device is installed must also display a label referring to the
enclosed device. This exterior label can use wording such as the following: “FCC ID: 2AHL7‐PQA300”
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or
transmitter. This device must be installed and operated with a minimum distance of 20 cm between the radiator and user body.
">