Complete user`s manual

Add to my manuals
68 Pages

advertisement

Complete user`s manual | Manualzz

Complete user’s manual

w w w.v t e c h p h o n e s . c o m

Models:

CS6619/CS6619-15/

CS6619-16/CS6619-2

Congratulations

on purchasing your new VTech product. Before using this telephone, please read

Important safety instructions on page 54 of this manual.

This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. In Canada, please visit www.vtechcanada.com.

The ENERGY STAR

®

program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR

® efficiency guidelines.

label indicating it meets the latest energy

Compatible with

Hearing Aid T-Coil

Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants.

The TIA-1083 Compliant Logo is a trademark of the Telecommunications

Industry Association. Used under license.

TIA-1083

T

Register online to get an additional 3-month warranty!

Visit www.vtechphones.com.

Registration

Register your product online for enhanced warranty support.

Product news

Learn about the latest VTech products.

Table of contents

Getting started . . . . . . . . . . . . . . . . . 1

Parts checklist . . . . . . . . . . . . . . . . . . . . . 1

Telephone base and charger

installation . . . . . . . . . . . . . . . . . . . . . . . 2

Battery installation . . . . . . . . . . . . . . . . . . 3

Battery charging . . . . . . . . . . . . . . . . . . . . 4

Installation options . . . . . . . . . . . . . . . . . . 5

Tabletop to wall mount installation . . . . . . 5

Wall mount to tabletop installation . . . . . . 6

Are you a new cable or VoIP

subscriber? . . . . . . . . . . . . . . . . . . . . . . 7

Did you subscribe to voicemail service from your telephone service provider? . . . 7

Telephone base layout . . . . . . . . . . . . . . . 8

Handset layout . . . . . . . . . . . . . . . . . . . . . 9

Telephone settings. . . . . . . . . . . . . 11

Using the menu . . . . . . . . . . . . . . . . . . . 11

Ringer volume . . . . . . . . . . . . . . . . . . . . 11

Ringer tone. . . . . . . . . . . . . . . . . . . . . . . 12

Quiet mode . . . . . . . . . . . . . . . . . . . . . . 12

Set date and time . . . . . . . . . . . . . . . . . . 13

LCD language. . . . . . . . . . . . . . . . . . . . . 14

Voicemail number. . . . . . . . . . . . . . . . . . 15

Clear voicemail. . . . . . . . . . . . . . . . . . . . 16

Key tone . . . . . . . . . . . . . . . . . . . . . . . . . 17

Home area code. . . . . . . . . . . . . . . . . . . 17

Dial mode . . . . . . . . . . . . . . . . . . . . . . . . 18

Telephone operation . . . . . . . . . . . 19

Make a call . . . . . . . . . . . . . . . . . . . . . . . 19

Predial a call. . . . . . . . . . . . . . . . . . . . . . 19

Answer a call . . . . . . . . . . . . . . . . . . . . . 19

End a call . . . . . . . . . . . . . . . . . . . . . . . . 19

Speakerphone . . . . . . . . . . . . . . . . . . . . 19

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Call waiting . . . . . . . . . . . . . . . . . . . . . . . 20

Temporary ringer silencing. . . . . . . . . . . 20

Temporary tone dialing. . . . . . . . . . . . . . 21

Redial . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Check voicemail . . . . . . . . . . . . . . . . . . . 22

Chain dialing. . . . . . . . . . . . . . . . . . . . . . 22

Web address . . . . . . . . . . . . . . . . . . . . . 23

Transfer a call. . . . . . . . . . . . . . . . . . . . . 23

Find handset. . . . . . . . . . . . . . . . . . . . . . 24

Multiple handset use . . . . . . . . . . . 25

Join a call in progress . . . . . . . . . . . . . . 25

Intercom . . . . . . . . . . . . . . . . . . . . . . . . . 26

Answer an incoming call during an

intercom call . . . . . . . . . . . . . . . . . . . . 26

Call transfer using intercom . . . . . . . . . . 27

Directory . . . . . . . . . . . . . . . . . . . . . 28

About the directory . . . . . . . . . . . . . . . . . 28

Add a directory entry . . . . . . . . . . . . . . . 29

Review and dial from the

directory. . . . . . . . . . . . . . . . . . . . . . . . 31

Alphabetical search . . . . . . . . . . . . . . . . 31

Edit a directory entry. . . . . . . . . . . . . . . . 32

Delete a directory entry . . . . . . . . . . . . . 32

Speed dial. . . . . . . . . . . . . . . . . . . . . . . . 33

Assign a speed dial entry . . . . . . . . . . . . 33

Reassign a speed dial entry . . . . . . . . . . 34

Dial a speed dial number . . . . . . . . . . . . 34

Delete a speed dial entry . . . . . . . . . . . . 34

Caller ID. . . . . . . . . . . . . . . . . . . . . . 35

About caller ID . . . . . . . . . . . . . . . . . . . . 35

Information about caller ID with call

waiting . . . . . . . . . . . . . . . . . . . . . . . . . 35

Caller ID log . . . . . . . . . . . . . . . . . . . . . . 36

Missed call indicator . . . . . . . . . . . . . . . . 36

i

Table of contents

Memory match . . . . . . . . . . . . . . . . . . . . 37

Review and dial from the

caller ID log . . . . . . . . . . . . . . . . . . . . . 37

View dialing options . . . . . . . . . . . . . . . . 38

Save a caller ID log entry to the

directory. . . . . . . . . . . . . . . . . . . . . . . . 39

Delete the caller ID log entries . . . . . . . . 40

Caller ID log screen messages. . . . . . . . 40

Appendix . . . . . . . . . . . . . . . . . . . . . 41

Expand your telephone system . . . . . . . 41

Add and register a handset . . . . . . . . . . 41

Deregister handsets . . . . . . . . . . . . . . . . 42

Screen messages. . . . . . . . . . . . . . . . . . 43

Handset and telephone base

indicators . . . . . . . . . . . . . . . . . . . . . . . 45

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Troubleshooting . . . . . . . . . . . . . . . . . . . 47

Important safety instructions. . . . . . . . . . 54

Precautions for users of implanted

cardiac pacemakers . . . . . . . . . . . . . . 55

Operating range . . . . . . . . . . . . . . . . . . . 55

ECO mode . . . . . . . . . . . . . . . . . . . . . . . 55

Maintenance. . . . . . . . . . . . . . . . . . . . . . 56

About cordless telephones . . . . . . . . . . . 57

The RBRC

®

seal . . . . . . . . . . . . . . . . . . 57

Limited warranty . . . . . . . . . . . . . . . . . . . 58

FCC, ACTA and IC regulations . . . . . . . 60

Technical specifications . . . . . . . . . . . . . 61

Index . . . . . . . . . . . . . . . . . . . . . . . . 62

ii

Getting started

Parts checklist

Your telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Handset

(1 for CS6619/CS6619-15/

CS6619-16)

(2 for CS6619-2)

Charger and charger adapter

(1 for CS6619-2)

Telephone base

Telephone line cord

Telephone base power adapter

Battery compartment cover

(1 for CS6619/CS6619-15/

CS6619-16)

(2 for CS6619-2)

Abridged user’s manual

Battery

(1 for CS6619/CS6619-15/

CS6619-16)

(2 for CS6619-2)

Wall mount bracket Abridged user’s manual

To purchase a replacement battery or power adapter, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

1

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and telephone wall jack. Contact your DSL service provider for more information about

DSL filters.

Telephone wall jack

Electrical outlet

(not controlled by a wall switch)

Electrical outlet

(not controlled by a wall switch)

A DSL filter (not included) is required if you have DSL high-speed Internet service.

The DSL filter must be plugged into the telephone wall jack.

Telephone base power adapter

Telephone line cord

Charger adapter

Charger

Telephone base

Use only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

If you subscribe to telephone service from a cable company or a VoIP service provider, contact your cable/VoIP service provider for more information.

2

Getting started

Battery installation

Install the battery as shown below.

1.

Plug the battery connector securely into the socket, matching the orientation of the engraved label.

2.

Place the battery with the label

THIS SIDE UP facing up and the wires inside the battery compartment.

3.

Slide the battery compartment cover towards the center of the handset until it clicks into place.

4.

Place the handset in the telephone base or charger to charge.

CHARGE light remains on when charging.

If you want to use the handset(s) of this telephone base with your existing compatible base, you need to deregister all handsets from this base first, and then register the handset(s) to the desired compatible base. See page 42 and page 41 for handset deregistration and handset registration respectively.

If the handset will not be used for a long period of time, disconnect and remove the battery to prevent any possible leakage.

To purchase replacement batteries, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

IMPORTANT:

Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.

It may be a wiring problem. If you have changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your cable/VoIP service provider for more information.

3

Getting started

Battery charging

Once you have installed the battery, the screen indicates the battery status

(see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table on page 46 for battery operating times.

If the screen is blank or displays Put in charger, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use for a short time. When the battery is low, the handset displays Low battery along with a flashing icon. If you are on a call in low battery mode, the handset plays short beeps to alert you.

The following table summarizes the battery charge indicators and actions to take.

Battery indicators

The screen is blank, or displays Put in charger and

flashes.

The screen displays

Low battery and

flashes.

The screen displays

HANDSET X.

Battery status

The battery has no or very little charge. The handset cannot be used.

The battery has enough charge to be used for a short time.

The battery is charged.

Action

Charge without interruption

(at least 30 minutes).

Charge without interruption

(about 30 minutes).

To keep the battery charged, place it in the telephone base or charger when not in use.

If you place the handset in the telephone base or charger without plugging in a battery, the screen displays

NO BATTERY

.

After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time.

For instructions, see Set date and time on page 13. To skip setting, press CANCEL.

Date: MM/DD/YY

ECO

4

Getting started

Installation options

The telephone comes ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mount plate. If you do not have this wall mount plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the wall mount plate.

Tabletop to wall mount installation

1.

Remove the telephone line cord from the telephone wall jack, and the telephone base power adapter from the electrical outlet

(if necessary).

2.

Position the telephone base against the wall mount bracket with the extended tabs marked

B on top.

Insert the extended tabs marked

B on the wall mount bracket into the slots marked

B on the back of the telephone base. Push the telephone base down until it clicks securely.

3.

Route the telephone line cord through the hole on the wall mount bracket and plug it into the telephone wall jack. Route the power cord out of the telephone base and plug it into an electrical outlet not controlled by a wall switch.

4.

Align the holes on the bracket with the standard wall plate and slide the bracket down until it locks securely.

Bundle the telephone line cord and power adapter cord neatly with twist ties.

5

Getting started

Wall mount to tabletop installation

1.

If the telephone line cord and power adapter cord are bundled, untie them first.

2.

Slide the wall mount bracket up and remove it from the wall mount plate. Unplug the telephone line cord (or DSL filter) from the telephone wall jack. Unplug the power adapter from the power outlet.

3.

Slide the telephone base up and remove it from the wall mount bracket.

4.

See Telephone base and charger installation on page 2.

6

Getting started

Are you a new cable or VoIP subscriber?

If your answer is yes, the existing telephone jacks in your home may no longer work.

Your cable/VoIP service provider uses a different connection, separate from your old traditional telephone service, to connect the modem/router/terminal adapter installed in your home.

To allow all existing telephone jacks to work, contact your telephone service provider for solutions, such as rewiring services (fees may apply).

If your answer is no, your existing telephone jacks will continue to work as normal.

Conventional telephone line jack

OLD

Main landline

NEW

Cable or

Internet

Modem/Router/

Terminal adapter

Did you subscribe to voicemail service from your telephone service provider?

This telephone supports voicemail feature offered by your telephone service provider (subscription required, and fees may apply). It does not have a built-in answering system.

To use the voicemail:

To retrieve your voicemail messages, you typically dial an access number provided by your telephone service provider, and then enter a security code. Contact your telephone service provider for instructions on how to configure the voicemail settings and listen to messages.

7

Getting started

Telephone base layout

IN USE light

• Flashes when there is an incoming call, or another telephone sharing the same line is in use.

• Flashes when handsets are being deregistered.

• On when a handset is in use.

On when a handset is being registered.

/FIND HANDSET

• Press to page all system handsets (page 24).

8

Getting started

Handset layout

CHARGE light

• On when the handset is charging in the telephone base or charger (page 3).

/ / VOLUME

Press to review the directory when the phone is not in use (page 31).

During a call, press to increase the listening volume

(page 20).

• Press to scroll up while in a menu, or reviewing the directory, caller ID log or redial list.

• While entering numbers or names in the directory, press to move the cursor to the right.

REDIAL/PAUSE

Press repeatedly to review the last 10 numbers dialed

(page 21).

While dialing or entering numbers, press and hold to insert a dialing pause (page 19 or page 29).

/FLASH

• Press to make or answer a call (page 19).

• During a call, press to answer an incoming call when you receive a call waiting alert (page 20).

1

While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the caller ID log entry before dialing or saving it to the directory (page 38).

Press and hold to set or dial your voicemail number

(page 15 and page 22).

Dialing keys

• Press to enter numbers or characters.

Press to answer an incoming call (page 19).

TONE

• While on a call, press to switch to tone dialing temporarily when using pulse service (page 21).

Press to make or answer a call using the handset speakphone (page 19).

During a call, press to switch between the handset speakerphone and the cordless handset (page 19).

9

Getting started

Handset layout

CID/ /VOLUME

Press to review the caller ID log when the phone is

not in use (page 37).

During a call, press to decrease the listening volume

(page 20).

Press to scroll down while in a menu, or reviewing the directory, caller ID log or redial list.

While entering numbers or names in the directory, press to move the cursor to the left.

MENU/SELECT

• Press to show the menu (page 11).

While in a menu, press to choose an item, or save an entry or setting.

OFF/CANCEL

• During a call, press to hang up.

While the handset is ringing, press to silence the ringer temporarily (page 20).

Press and hold to erase the missed call indicator when the phone is not in use (page 36).

While in a menu, press to return to the previous menu, or press and hold to return to idle mode, without making changes.

MUTE/DELETE

While on a call, press to mute the microphone

(page 20).

While using the dialing keys, press to delete digits or characters (page 19 and page 29).

While the handset is ringing, press to silence the ringer temporarily (page 20).

When reviewing the directory, caller ID log or redial list, press to delete the displayed entry (page 32, page 40 or page 21).

QUIET

#

Press and hold to set and turn on the quiet mode, or turn it off (page 12).

Press repeatedly to show other dialing options when reviewing a caller ID log entry (page 38).

INT

• Press to start an intercom conversation or transfer a call (for multi-handset models only) (page 26 and page 27).

10

Telephone settings

Using the menu

You can use a cordless handset to change the telephone settings.

In the ringers menu, you can select the ringer tones and adjust the ringer volume for incoming calls.

In the settings menu, you can change the settings for LCD language, voicemail number, voicemail indicators, key tone, home area code and dial mode.

To enter the handset menu:

1.

Press MENU when the phone is not in use.

2.

Press or until the handset displays the desired feature menu.

3.

Press SELECT to enter that menu.

• To return to the previous menu, press CANCEL.

To return to idle mode, press and hold

CANCEL.

Ringer volume

You can adjust the ringer volume or turn the ringer off on each handset.

When the ringer is turned off, the handset displays and Ringer off.

1.

Press

MENU when the handset is not in use.

Ringers

2.

Press or until the handset displays Ringers, ress SELECT.

ECO

3.

The handset displays

Ringer volume, then press

SELECT again.

4.

Press or to sample each ringer volume level.

Ringer volume

ECO

5.

Press SELECT to save your selection. You hear a confirmation tone.

The ringer volume also determines the ringer volume for intercom calls. If the ringer volume is set to off, that handset is silenced for all incoming calls except paging tone.

Volume:

ECO

11

Telephone settings

Ringer tone

You can choose from different ringer tones on each handset.

1.

Press MENU when the handset is not in use.

2.

Press or until the handset displays

Ringers, then press

SELECT.

3.

Press or until the handset displays Ringer tone, then press SELECT.

4.

The handset displays

Tone: with the current setting displayed. Press or to sample each ringer tone.

5.

Press SELECT to save your selection. You hear a confirmation tone.

If you turn off the ringer volume, you will not hear ringer tone samples.

Ringers

ECO

Ringer tone

ECO

Tone: 1

ECO

Quiet mode

You can turn on the quiet mode for a period of time (1-12 hours).

During this period, all tones (except paging tone) are muted.

To set the duration and turn on the quiet mode:

1.

Press and hold

QUIET

#

when the handset is not in use.

2.

The handset displays Quiet: _ _ hours. Use the dialing keys

( 0-9) to enter the desired duration (1-12).

3.

Press

SELECT to save. You hear a confirmation tone.

The handset displays

Quiet mode on and .

To turn off the quiet mode:

Press and hold

QUIET

#

when the handset is not in use. The handset displays

Quiet mode off briefly and then returns to idle.

When you change the settings of the ringer tone or ringer volume, you can still hear the samples even if the quiet mode is on.

Quiet: _ _ hours

[1-12]

ECO

Quiet mode on

ECO

10:15

PM

12/25

Quiet mode off

ECO

10:15

PM

12/25

12

Telephone settings

Set date and time

If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. You can also set the date and time manually.

1.

Press MENU when the handset is not in use.

2.

Press or until the handset displays

Set date/time, then press

SELECT.

3.

Press or to select the month then press SELECT, or use the dialing keys to enter a two-digit number ( 01-12).

4.

Press or to select the date then press

SELECT, or use the dialing keys to enter a two-digit number (

01-31).

5.

Press or to select the year then press SELECT, or use the dialing keys to enter a two-digit number ( 00-99) then press SELECT.

6.

Press or to select the hour then press

SELECT, or use the dialing keys to enter a two-digit number (

01-12).

7.

Press or to select the minute then press SELECT, or use the dialing keys to enter a two-digit number ( 00-59).

8.

Press or to select

AM or PM.

9.

Press SELECT to save the settings. You hear a confirmation tone.

Set date/time

ECO

Date: MM/DD/YY

ECO

Time: HH:MM - -

ECO

The handset plays two beeps if you enter an invalid number.

13

Telephone settings

LCD language

You can select English, French or Spanish to be used in all screen displays.

1.

Press MENU when the handset is not in use.

2.

Press or until the handset displays

Settings, then press

SELECT.

3.

Press SELECT to choose LCD language.

4.

Press or to choose

English, Français or Español, then press

SELECT.

• The screen displays Set English? when you choose English.

The screen displays

Set Francais? when you choose

Français.

• The screen displays Set Espanol? when you choose Español.

5. Press

SELECT to save your selection. You hear a confirmation tone.

Settings

ECO

LCD language

ECO

English

ECO

If you accidentally change the LCD language to French or Spanish, you can reset it to

English easily by pressing MENU then entering 364#.

14

Telephone settings

Voicemail number

If you subscribe to voicemail service offered by your telephone service provider, you can save the voicemail number to

When you want to retrieve voicemail messages, press and hold voicemail service.

1

on each handset for easy access.

1

. Contact your telephone service provider for more information and assistance about using your

To set your voicemail number:

1.

Press and hold

1

when the phone is not in use.

2.

Use the dialing keys to enter the voicemail number (up to

30 digits).

• Press

or to move the cursor to the left or right.

Press DELETE to erase a digit.

Press and hold

DELETE to erase all digits.

• Press and hold PAUSE to insert a dialing pause (a P appears).

3. Press

SELECT to save. Then the handset dials the saved voicemail number.

-OR-

1.

Press MENU when the handset is not in use.

2.

Press

or to scroll to Settings, then press SELECT.

3.

Press or to scroll to Voicemail #, then press SELECT.

4.

Use the dialing keys to enter the voicemail number

(up to 30 digits).

• Press or to move the cursor to the left or right.

Press

DELETE to erase a digit.

Press and hold DELETE to erase all digits.

Press and hold

PAUSE to insert a dialing pause

(a

P appears).

5. Press SELECT to save. The handset displays VM # saved

and the stored number. You hear a confirmation tone.

Settings

ECO

Voicemail #

ECO

Voicemail #

ECO

-

15

Telephone settings

Clear voicemail

If you subscribe to voicemail service offered by your telephone service provider, the handsets display

New voicemail and when you have new voicemail messages. Contact your telephone service provider for more information about using your voicemail service.

After you have listened to all new voicemail messages, the indicators on the handsets turn off automatically.

Use the clear voicemail feature when the telephone indicates that there is new voicemail but there are none (for example, when you have accessed your voicemail while away from home). The clear voicemail feature only turns off the indicators; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators.

To manually turn off these indicators:

1.

Press

MENU when the handset is not in use.

2.

Press or until the handset displays Settings, then press SELECT.

3.

Press or until the handset displays

Clr voicemail, then press

SELECT. The handset displays Reset VM Icon?

4.

Press SELECT to save your selection. You hear a confirmation tone.

Your telephone service provider may alert you of new messages with a stutter (broken) dial tone. Contact your telephone service provider for details.

Settings

ECO

Clr voicemail

ECO

Reset VM Icon?

ECO

16

Telephone settings

Key tone

You can turn the key tone on or off for each handset.

If you turn the key tone on, the handset beeps with each key press. If you turn the key tone off, there are no beeps when you press the handset keys.

1.

Press

MENU when the handset is not in use.

2.

Press or until the handset displays Settings, then press SELECT.

3.

Press or until the handset displays

Key tone, then press

SELECT.

4.

Press or to choose Key tone:On or Key tone:Off.

5.

Press

SELECT to save your selection. You hear a confirmation tone.

Settings

ECO

Key tone

ECO

Key tone:On

ECO

Home area code

If you dial local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored in the caller ID log without the area code.

1.

Press

MENU when the phone is not in use.

2.

Press or until the handset displays Settings, then press SELECT.

3.

Press or until the handset displays

Home area code, then press

SELECT.

4.

Use the dialing keys ( 0-9) to enter the desired home area code.

• Press

DELETE to delete a digit.

• Press and hold DELETE to delete all digits.

5. Press

SELECT to save. You hear a confirmation tone.

Settings

ECO

Home area code

ECO

Home area code

ECO

- - -

If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, follow the steps above to delete the home area code you have already programmed. After you have deleted the home area code, _ _ _ appears.

17

Telephone settings

Dial mode

The dial mode is preset to touch-tone dialing. If you have pulse

(rotary) service, you must change the dial mode to pulse dialing before using the telephone to make a call.

1.

Press MENU when the phone is not in use.

2.

Press or

until the handset displays Settings, then press

SELECT.

3.

Press or until the handset displays Dial mode, then press SELECT.

4.

Press or

to choose Touch-tone or Pulse.

5.

Press SELECT to save your selection. You hear a confirmation tone.

Settings

ECO

Dial mode

ECO

Touch-tone

ECO

18

Telephone operation

Make a call

1.

Press or on the handset.

2.

When you hear a dial tone, dial the number with the dialing keys (

0-9).

The screen displays the elapsed time as you talk (in hours, minutes and seconds).

While entering numbers, press and hold

PAUSE to insert a dialing pause (a

P appears).

Predial a call

1.

Enter the number with the dialing keys (

0-9).

2.

Press or to dial.

• The screen displays the elapsed time as you talk (in hours, minutes and seconds).

While predialing, press

DELETE or CANCEL to backspace and delete; press and hold

PAUSE to insert a dialing pause (a P appears).

Answer a call

Press , or any dialing key ( 0-9, TONE or QUIET

#

).

End a call

Press

OFF or put the handset to the telephone base or charger.

Speakerphone

During a call, press to switch between speakerphone and normal handset use.

When the speakerphone is active, the handset displays

Speaker.

19

Telephone operation

Volume

During a call, press

/VOLUME or /VOLUME to adjust the listening volume.

When the volume reaches the minimum or maximum setting, you hear two beeps.

The handset earpiece and speakerphone volume settings are independent.

Mute

The mute function allows you to hear the other party but the other party cannot hear you.

During a call, press

MUTE. The handset displays Muted until the mute function is turned off.

Muted

Press MUTE again to resume the conversation. The handset displays Microphone on briefly.

ECO

10:15

PM

12/25

Call waiting

When you subscribe to call waiting service from your telephone service provider, you hear an alert tone if there is an incoming call while you are already on another call.

Press FLASH to put the current call on hold and take the new call.

Press

FLASH at any time to switch back and forth between calls.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the handset ringer without disconnecting the call. The next call rings normally at the preset volume.

Press OFF or MUTE, then displays and Ringer muted displays briefly.

Ringer muted

Each handset rings when there is an incoming call unless the ringer volume of that handset is turned off.

ECO

20

Telephone operation

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services.

1.

During a call, press TONE .

2.

Use the dialing keys to enter the number. The telephone sends touch-tone signals.

It automatically returns to pulse dialing mode after you end the call.

Redial

Each handset stores the last 10 telephone numbers dialed.

When there are already 10 entries, the oldest entry is deleted to make room for the new entry.

Entries are in reverse chronological order.

The handset plays two beeps when you reach the end or beginning of the redial list, or when you access the redial list with no records.

To review and dial a redial entry:

1.

Press

REDIAL when the phone is not in use.

2.

Press , or REDIAL repeatedly until the desired entry displays.

3.

Press or to dial.

-OR-

1.

Press or when the phone is not in use.

2.

Press REDIAL and then press , or REDIAL repeatedly until the desired entry displays.

3.

Press

SELECT to dial.

Redial #2/10

ECO

800-595-9511

To delete a redial entry:

1.

Press

REDIAL when the handset is not in use.

2.

Press , or REDIAL repeatedly to browse to the desired entry.

3.

Press

DELETE to delete the displayed number. You hear a confirmation tone.

21

Telephone operation

Check voicemail

Press and hold

1

to dial your voicemail number.

See

Voicemail number on page 15 to set the voicemail number.

Chain dialing

Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID log or redial list while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list.

To access a number in the directory:

1.

Press MENU while on a call.

2.

Press

SELECT to choose Directory.

3.

Press or to scroll to the desired entry.

4.

Press

SELECT to dial the displayed number.

To access a number in the caller ID log:

1.

Press

MENU while on a call.

2.

Press or to scroll to Caller ID log, then press SELECT.

3.

Press or to scroll to the desired entry.

4.

Press SELECT to dial the displayed number.

To access a number on the redial list:

1.

Press REDIAL while on a call.

2.

Press , or

REDIAL repeatedly to browse to the desired entry.

3.

Press SELECT to dial the displayed number.

Press CANCEL to exit the directory, caller ID log or redial list when you are on a call.

22

Telephone operation

Web address

Use this feature to view the VTech website address.

1.

Press MENU when the handset is not in use.

2.

Press or until the handset displays

Web address, then press

SELECT. The handset displays the VTech website address.

Transfer a call

While on an outside call, you can transfer the call from one handset to another.

1.

During a call, press

MENU.

2.

Press or to scroll to Transfer, then press SELECT.

• If you have two handsets, your handset displays

Calling HS X and then Transferred.

If you have three or more handsets, your handset displays Transfer to: Use the dialing keys to select a destination handset. Your handset displays

Calling HS X

and then Transferred.

The destination handset rings and its screen displays

Incoming call.

3. To answer on the destination handset, press , ,

or any dialing key (0-9, TONE or QUIET

destination handset.

#

) on the

If the destination handset does not answer the call within

30 seconds, the call will be reverted to the originating handset.

If you do not press , ,

QUIET

#

or any dialing key (0-9,

) on your handset to reconnect the outside call within

30 seconds, the call ends automatically.

TONE

or

If the destination handset is in the directory or caller ID log, or is out of range, the originating handset displays

Unable to call

and then reconnects to the outside call.

Web address

ECO www.vtechphones

ECO

.com

ECO

Transfer

ECO

Transfer to:

ECO

Calling HS X

ECO

Transferred

ECO

Incoming call

ECO

23

Telephone operation

Find handset

Use this feature to find all system handsets.

To start paging:

Press

/FIND HANDSET on the telephone base when not in use. All idle handsets ring and display ** Paging **.

To end paging:

Press

/FIND HANDSET on the telephone base.

-OR-

Press

, , OFF or any dialing key (0-9,

TONE

or

QUIET

#

) on a handset.

-OR-

Place the handset in the telephone base or charger.

Do not press and hold /FIND HANDSET for more than 4 seconds. It may lead to handset deregistration.

Press MUTE to turn off the ringer of a handset temporarily. Paging tone continues on all other handsets.

24

Multiple handset use

Multiple handset use

Join a call in progress

You can use up to two handsets at the same time on an outside call.

You can buy additional expansion handsets ( CS6609/CS6609-15/CS6609-16) for this telephone base.

You can register up to five handsets to the telephone base.

To share an outside call:

When a handset is already on a call and you would like to join the call, press

or on the other handset.

To exit the call, press

OFF or place the handset in the telephone base or charger.

The call continues until both handsets hang up.

25

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets. You can buy additional expansion handsets ( CS6609/CS6609-15/CS6609-16) for this telephone base. You can register up to five handsets to the telephone base.

1.

Press

INT

on your handset when not in use.

If you have only one handset, your handset displays

INT needs 2 HS.

If you have two handsets, your handset displays

Calling HS X.

• If you have three or more handsets, your handset displays

Intercom to. Use the dialing keys to enter a destination handset. Your handset displays

Calling HS X.

The destination handset rings and its screen displays

HS X is calling.

Calling HS X

ECO

HS X is calling

ECO

Intercom

ECO

2. To answer the intercom call, press , ,

INT or any dialing key

(

0-9, TONE or QUIET

#

) on the destination handset.

Both handsets now display

Intercom.

3. To end the intercom call, press OFF or place the handset back in the telephone

base or charger. Both handsets now display Intercom ended.

You can cancel the intercom call before it is answered by pressing OFF or INT on the originating handset.

If the destination handset does not answer the intercom call within 100 seconds, is on a call or out of range, the originating handset displays

Unable to call and returns to idle mode.

Press

OFF or MUTE on the destination handset to temporarily silence the intercom ringer.

You can use four handsets on two pairs of intercom calls. For example, when four handsets are used on two pairs of intercom calls, use the fifth handset for an outside call.

If there is an incoming call while the originating handset displays

Calling HS X, the intercom request will be stopped and the handset displays

Incoming call.

Answer an incoming call during an intercom call

When you receive an outside call during an intercom call, there is an alert tone.

To answer the outside call, press . The intercom call ends automatically.

To end the intercom call without answering the outside call, press

OFF.

The telephone continues to ring.

Multiple handset use

Multiple handset use

Call transfer using intercom

Use the intercom feature to transfer an outside call to another system handset.

1.

During a call, press INT.

If you have two handsets, the outside call is put on hold and your handset displays

Calling HS X.

If you have three or more handsets, your handset displays

Intercom to. Use the dialing keys to enter a handset number. The outside call is put on hold and your handset displays Calling HS X.

The destination handset rings and its screen displays

HS X is calling.

Intercom to

ECO

Calling HS X

ECO

HS X is calling

ECO

2.

To answer the intercom call on the destination handset, press

,

, INT or any dialing key (0-9, TONE or QUIET

#

). The outside call is still on hold and both handsets now display

Intercom. You can now have a private conversation with the destination handset.

Intercom

ECO

• To cancel the intercom call before it is answered, press

OFF, or

INT on your handset.

If the destination handset does not answer within 100 seconds, is in use, on a call or is out of range, the originating handset displays Unable to call and then reconnects to the outside call.

3. From this intercom call, you have the following options:

You can let the destination handset join you on the outside call in a three-way conversation. Press and hold

INT on the originating handset.

You can transfer the call. Press OFF, or place your handset back in the telephone base or charger. Your handset displays Transferred. The destination handset is then connected to the outside call.

You can press

INT to switch between the outside call (Outside call displays) and the intercom call (

Intercom displays).

The destination handset can end the intercom call by pressing OFF, or by placing the handset back in the telephone base or charger. The outside call continues with the original system handset.

Directory

About the directory

The directory can store up to 50 entries which are shared by all system handsets. Each entry may consist of a phone number up to 30 digits and a name up to 15 characters.

Directory entries are shared by all system handsets.

Any modifications made on one handset apply to all system handsets.

When you access the directory without records, the screen displays Directory empty.

When the directory is full and you try to save an entry, the screen displays

Directory full.

When you try to save an entry already stored in the directory, the screen displays Number repeated.

When the telephone number in the directory exceeds 15 digits, a dash

appears after the 14th digit, and the remaining digits are displayed after two seconds beginning with a dash.

Only one handset can review the directory at a time. When a handset tries to enter the directory while another handset is already in it, Not available appears.

Directory empty

ECO

Directory full

ECO

Number repeated

ECO

Mike Smith

12345678901234-

ECO

Mike Smith

-567

ECO

Not available

ECO

Directory

Add a directory entry

1.

Press MENU when the phone is not in use.

2.

Press or to scroll to

Directory, then press SELECT.

3.

Press SELECT to choose Add contact.

4.

When

Enter number displays, use the dialing keys to enter a number (up to 30 digits).

Directory

ECO

• Press or to move the cursor to the left or right.

• Press

DELETE to backspace and erase a digit.

Press and hold DELETE to erase all digits.

Press and hold

PAUSE to enter a dialing pause

(a

P appears).

-OR-

Copy a number from the redial list by pressing

REDIAL.

Then press , or

REDIAL repeatedly to find the desired

number. Press

SELECT to copy the number.

5. Press SELECT to move on to the name.

6. When

Enter name displays, use the dialing keys to enter a

name (up to 15 characters). Each time you press a key, the

character on that key appears. Additional key presses produce

other characters on that key. Press the key repeatedly until the

desired character appears. The first character of each word

is capitalized.

Add contact

ECO

Enter number

ECO

-

Enter name

ECO

Mike_

ECO

• Press or to move the cursor to the left or right.

• Press

0 to add a space.

Press DELETE to backspace and erase a character.

Press and hold

DELETE to erase all characters.

7. Press SELECT to confirm. The handset displays Saved and then you hear a

confirmation tone.

Directory

Add a directory entry

-OR-

1.

Use the dialing keys to enter a number (up to 30 digits) when the phone is not in use. Press SELECT. The handset displays Enter number.

• Press or to move the cursor to the left or right.

Enter number

800-595-9511-

ECO

• Press DELETE to backspace and erase a digit.

Press and hold

DELETE to erase all digits.

• Press and hold PAUSE to enter a dialing pause

(a P appears).

-OR-

Enter name

ECO

Mike_

Copy a number from the redial list by pressing REDIAL.

Then press , or REDIAL repeatedly to find the desired

number. Press SELECT to copy the number.

2. Press

SELECT to move on to the name.

ECO

3. When Enter name displays, use the dialing keys to enter a name (up to

15 characters). Each time you press a key, the character on that key appears.

Additional key presses produce other characters on that key. Press the key

repeatedly until the desired character appears. The first character of each word

is capitalized.

• Press or to move the cursor to the left or right.

• Press 0 to add a space.

Press

DELETE to backspace and erase a character.

• Press and hold DELETE to erase all characters.

4. Press

SELECT to confirm. The handset displays Saved and then you hear a

confirmation tone.

Directory

Review and dial from the directory

Entries are sorted alphabetically.

1.

Press when the phone is not in use. The handset displays

Entries in DIR X and then the first entry in the directory.

2.

Press or to browse. When the desired entry displays, press or to dial.

-OR-

1.

Press

MENU when the phone is not in use.

2.

Press or to scroll to Directory then press SELECT.

3.

Press or to scroll to

Review and then press SELECT.

The handset displays

Entries in DIR X and then the first entry in the directory.

4.

Press or to browse. When the desired entry displays, press or to dial.

Review

ECO

Entries in DIR

ECO

8

Mike Smith

800-595-9511

ECO

Alphabetical search

To start an alphabetical search:

1.

Press when the phone is not in use. The handset displays

Entries in DIR X and then the first entry in the directory.

-OR-

i.

Press

MENU when the phone is not in use.

ii.

Press or to scroll to Directory, then press SELECT.

iii.

Press or to scroll to

Review, then press SELECT. The handset displays

Entries in DIR X and then the first entry in the directory.

2.

Use the dialing keys to enter the letter associated with the name. For example, if you have entries for Jenny, Jessie, Kristen and Laura in your directory, press

5 (JKL) once to see Jenny (when Jenny displays, press to see Jessie), twice to see Kristen, or three times to see Laura. If there is no name entry matching your search, the next closest match in alphabetical order appears. If necessary, press

or to browse.

Directory

Edit a directory entry

1.

Search for the desired entry in the directory (see

Review and dial from the

directory or Alphabetical search on page 31).

2.

When the desired entry appears, press SELECT. The handset displays Edit number and the stored number.

3. Use the dialing keys to edit the number.

Edit number

800-595-9511_

ECO

Press DELETE to backspace and erase a digit.

Press and hold

DELETE to erase the entire entry.

Press or to move the cursor to the left or right.

• Press and hold PAUSE to insert a dialing pause (a P appears).

4.

Press

SELECT to move on to edit the name. The handset displays

Edit name and then the stored name.

5.

Use the dialing keys to edit the name (up to 15 characters).

Additional key presses show other characters of that particular key.

Edit name

ECO

Press

DELETE to backspace and erase a character.

Press and hold DELETE to erase the entire entry.

Press or to move the cursor to the left or right.

Mike Smith_

ECO

• Press 0 to add a space.

6.

Press

SELECT to confirm. The handset displays Saved and then you hear a confirmation tone.

Delete a directory entry

1.

Search for the desired entry in the directory (see

Review and dial from the directory or Alphabetical search on page 31).

2.

When the desired entry appears, press

DELETE. The handset displays

Delete contact? and the number.

3.

Press SELECT to confirm. The handset displays Deleting ... and then Contact deleted. You hear a confirmation tone.

Delete contact?

800-595-9511

ECO

Deleting...

ECO

Contact deleted

ECO

Directory

Speed dial

You can copy up to 9 directory entries into the speed dial locations ( 0 and 2-9) so that you can dial these numbers using fewer keys than usual.

The speed dial memory locations are stored in the telephone base and are shared by all handsets. Changes made to the speed dial entries on one handset apply to all.

Assign a speed dial entry

1.

Press MENU when the phone is not in use.

2.

Press or to scroll to

Directory, then press SELECT.

3.

Press or to scroll to Speed dial, then press SELECT.

4.

Press or or the dialing keys (

0 or 2-9) to choose the desired speed dial location.

5.

Press SELECT. The handset displays Copy from DIR... and then the first entry in the directory.

6.

Press or to browse to the desired entry.

-OR-

Use the alphabetical search to find the desired entry

(see page 31).

7.

Press SELECT to save. You hear a confirmation. The name

(up to 12 characters) appears in the selected speed dial location.

If the directory is empty, when you press

SELECT in Step 5, the handset displays

Directory empty.

If the speed dial location you selected is occupied, the new directory entry you selected replaces the old one. Take caution not to replace entries you do not wish to delete from the speed dial locations.

0:<Unassigned>

ECO

Copy from DIR...

ECO

Mike Smith

800-595-9511

ECO

0:Mike Smith

ECO

Directory

Reassign a speed dial entry

1.

Press MENU when the phone is not in use.

2.

Press or to scroll to

Directory, then press SELECT.

3.

Press or to scroll to Speed dial, then press SELECT.

4.

Press or , or use the dialing keys to choose the speed dial location you want to reassign.

5.

Press SELECT twice. The handset displays Reassign SD.

6.

Press

SELECT. The handset displays Copy from DIR... and then the first entry of the directory.

7.

Press or to browse to the desired entry.

-OR-

Use the alphabetical search to find the desired entry

(see page 31).

8. Press SELECT to save. You hear a confirmation. The name

(up to 12 characters) appears in the selected speed dial location.

Directory

ECO

Speed dial

ECO

Reassign SD

ECO

Copy from DIR...

ECO

Dial a speed dial number

Press and hold a dialing key (

0

or

2-9) to dial the number stored in the corresponding speed dial location.

When the speed dial location is empty, the handset displays the speed dial list.

See Assign a speed dial entry on page 33 to add a new entry.

Delete a speed dial entry

1.

Press MENU when the phone is not in use.

2.

Press or to scroll to

Directory, then press SELECT.

3.

Press or to scroll to Speed dial, then press SELECT.

4.

Press or , or use the dialing keys

to choose the desired speed dial location, then press

DELETE. The handset displays

Clear SD #X?

5.

Press SELECT to confirm. You hear a confirmation tone.

Deleting the speed dial entries does not affect the entries in the directory.

34

Directory

ECO

Speed dial

ECO

Clear SD #X?

ECO

Caller ID

About caller ID

This product supports caller ID services provided by most telephone service providers.

Depending on your service subscription, you may see the caller’s number, or the caller’s name and number that are sent by your telephone service provider after the first or second ring. Caller ID allows you to see the name, number, date and time of calls.

Information about caller ID with call waiting

Caller ID with call waiting lets you see the name and telephone number of the caller before answering the telephone, even while on another call.

It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if:

You have both caller ID and call waiting, but as separate services (you may need to combine these services).

You have only caller ID service, or only call waiting service.

• You do not subscribe to caller ID or call waiting services.

There are fees for caller ID services. In addition, services may not be available in all areas.

This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment. The time and date, along with the call information, are from the telephone service provider.

You can use this product with regular caller ID service, or you can use this product’s other features without subscribing to caller ID or combined caller ID with call waiting service.

Caller ID

Caller ID log

If you subscribe to caller ID service, information about each caller will appear after the first or second ring. If you answer a call before the caller information appears on the screen, it will not be saved in the caller ID log.

The caller ID log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15 characters for the name. If the telephone number has more that

15 digits, only the last 15 digits appear. If the name has more than 15 characters, only the first 15 characters are shown and saved in the caller ID log.

You can review, redial and copy an entry into the directory.

Entries appear in reverse chronological order.

When the caller ID log is full, the oldest entry is deleted to make room for new incoming call information.

XX missed calls displays when you have incoming calls that have not been answered.

Call log empty displays when you access the caller ID log without records.

Caller ID log entries are shared by all system handsets. Any deletions made on one handset are reflected on all other handsets.

Only one handset can review the caller ID log at a time. If a handset tries to enter the caller ID log while another handset is already in it, Not available displays.

For caller ID log entries with numbers between 16 and 24 digits, in order to view the entire number, you must save the entry to the directory (see page 39).

If the phone number has more than 24 digits, it will not be saved or shown in the caller ID log.

Missed call indicator

When you have incoming calls that have not been answered, the handset displays XX missed calls.

Each time you review a caller ID log entry marked

NEW, the number of missed calls decreases by one.

When you have reviewed all the missed calls, the missed call indicator no longer displays.

If you do not want to review the missed calls one by one, press and hold

CANCEL on the idle handset to erase the missed call indicator. All the entries are then considered old and kept in the caller ID log.

XX missed calls

ECO

10:15

PM

12/25

Mike Smith

595-9511

ECO

10:15

NEW

PM

12/25

Caller ID

Memory match

When the incoming telephone number matches the last seven digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory.

For example, if Linda Jones calls, her name appears as

Linda if this is how you entered it into your directory.

The number shown in the caller ID log is in the format sent by the telephone service provider. The telephone service provider usually delivers 10-digit phone numbers (area code plus telephone number). If the phone number of the caller does not match a number in your directory, the name will appear as it is delivered by the telephone service provider.

Review and dial from the caller ID log

1.

Press CID when the phone is not in use. The handset displays

Entries in CID X and then the first entry in the caller ID log.

2.

Press or to browse.

3.

When the desired entry displays, press or to call.

-OR-

1.

Press MENU when the phone is not in use.

2.

Press or to scroll to Caller ID log then press SELECT.

3.

Press

SELECT to choose Review.

4.

Press or to browse.

5.

When the desired entry displays, press or to call.

You hear a double beep when you reach the beginning or end of the caller ID log.

Caller ID log

ECO

Review

ECO

Entries in CID

ECO

48

Mike Smith

800-595-9511

ECO

10:15

PM

12/25

Caller ID

View dialing options

Although the caller ID log entries received have

10 digits (the area code plus the seven-digit number), in some areas, you may dial only the seven digits, or a

1 plus the seven digits, or a 1 plus the area code plus the seven digits. You can change the number of digits that you dial from the caller ID log and store the new number to the directory.

While reviewing the caller ID log, press

QUIET

#

repeatedly to show different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory.

Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory.

When the number is shown in the correct format for dialing, press or to dial.

Mike Smith

800-595-9511

ECO

10:15

PM

12/25

Press

#

1-800-595-9511

Press

#

595-9511

Press

#

1-595-9511

Press

#

800-595-9511

-OR-

Press

1

1-800-595-9511

Press

1

800-595-9511

Caller ID

Save a caller ID log entry to the directory

1.

Press

CID when the phone is not in use.

-OR-

Press MENU when the phone is not in use. Press or to scroll to Caller ID log.

Then press SELECT twice.

2. When the desired entry appears, press

SELECT. The handset

displays

Edit number and the stored number.

Edit number

3. Use the dialing keys to edit the number.

800-595-9511_

ECO

Press

DELETE to backspace and erase a digit.

Press and hold

DELETE to erase the entire entry.

Press or to move the cursor to the left or right.

Press and hold

PAUSE to insert a dialing pause (a P appears).

4.

Press SELECT to move on to edit the name. The handset displays Edit name.

5.

Use the dialing keys to enter the name (up to 15 characters).

Additional key presses show other characters of that particular key.

Edit name

ECO

Press DELETE to backspace and erase a character.

Press and hold

DELETE to erase the entire entry.

Press or to move the cursor to the left or right.

• Press 0 to add a space.

6.

Press

SELECT to confirm. The handset displays Saved and then you hear a confirmation tone.

If you try to save an entry without caller ID information, the handset displays

Unable to save and you hear a double beep.

Caller ID

Delete the caller ID log entries

To delete an entry:

1.

When in the caller ID log, press or to browse.

2.

Press

DELETE to delete the selected entry. The handset displays Deleting... and then you hear a confirmation tone.

To delete all entries:

1.

Press

MENU when the phone is not in use.

2.

Press or to scroll to Caller ID log, then press SELECT.

3.

Press or to scroll to

Del all calls, then press SELECT.

4.

Press

SELECT to confirm. The handset displays Deleting... and then you hear a confirmation tone.

Delete all?

ECO

Caller ID log screen messages

Displays

PRIVATE NAME

PRIVATE NUMBER

PRIVATE CALLER

UNKNOWN NAME

UNKNOWN NUMBER

UNKNOWN CALLER

LONG DISTANCE

-OR-

L

(before the caller’s number)

When

The caller is blocking the name information.

The caller is blocking the telephone number information.

The caller is blocking the name and number information.

This caller’s name is unavailable.

This caller’s number is unavailable.

No call information is available about this caller.

It is a long distance call.

Appendix

Expand your telephone system

Your telephone base can support up to five handsets. Each handset must be registered to the telephone base before use. The handsets provided within your product package are already registered as HANDSET 1 and so forth. You can add new handsets ( CS6609/CS6609-15/CS6609-16, purchased separately) to your telephone base. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 5).

Add and register a handset

When first purchased, each expansion handset displays To register HS and

See manual alternately. You may need to charge the handset before registering to the telephone base. For more details on battery charging, see the table on page 4.

To register a handset:

1.

Place the new/non-registered handset in the telephone base.

Do not place the handset in the charger.

2. After about 10 seconds, the handset displays Registering... When the registration

process completes, the handset displays Registered and you hear a confirmation

tone. The registration process takes about 90 seconds to complete.

If the registration fails, the handset displays Failed and then To register HS and

See manual alternately. Remove the handset from the telephone base and place it back in to start the registration process again.

• You cannot register a handset if any other system handset is in use.

Only one handset can register to the telephone base at a time.

Appendix

Deregister handets

If you want to replace a handset, or reassign the designated handset number of a registered handset, you must deregister all handsets that are registered to the telephone base. Then register each handset individually.

If you want to register a handset to another compatible base ( CS6619/CS6629/

CS6648/CS6649), you must deregister all handsets and then register each handset individually to the desired telephone base.

To make deregistration easier, read all of the instructions below before you begin.

To deregister all handsets:

1.

Press and hold

/FIND HANDSET on the telephone base for about 10 seconds until the

IN USE light on the telephone base turns on and starts to flash.

2.

Immediately press /FIND HANDSET again. You must press /FIND HANDSET while the IN USE light is still flashing. The IN USE light flashes for approximately five seconds.

3.

All handsets display

To register HS and See manual alternately when the deregistration process completes. The deregistration process takes about

10 seconds to complete.

To register the handset(s) to the telephone base again, follow the registration instructions on the previous page.

• You cannot deregister all handsets if any other system handset is in use.

If deregistration fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in.

Even if the battery is depleted, you can still deregister all handsets by following the steps above. After the handset is charged for at least 10 minutes, the handset alternately shows To register HS and See manual.

Appendix

Screen messages

Call log empty

Calling HS X

(for models with two or more handsets only)

Contact deleted

Directory empty

Directory full

Ended

Failed

HS X is calling

(for models with two or more handsets only)

Incoming call

INT needs 2 HS

Intercom

Intercom ended

Intercom to

(for models with three or more handsets only)

Line in use

Low battery

Microphone on

Muted

New voicemail

NO BATTERY

No line

Not available

There are no caller ID log entries.

You are calling another handset (for intercom calls).

A directory entry is deleted.

There are no directory entries.

The directory is full. You cannot save any new entry unless you delete some current entries.

You have just ended a call.

The handset registration is not successful.

Another handset is calling (for intercom calls).

There is an incoming call.

Two handsets are required for an intercom call.

The handset is on an intercom call.

The intercom call has just ended.

You have started the intercom process or started transferring a call, and need to enter the desired handset number.

A system handset or another telephone on the same line is in use.

The battery needs to be recharged.

MUTE is turned off and the person on the other end can hear you.

You have turned off the handset microphone. The other party cannot hear you but you can hear the other party.

There are new voicemail message(s) from your telephone service provider.

You place the handset in the telephone base or charger without installing a battery in it.

There is no telephone line connected.

Another handset is already in the directory or caller ID log.

43

Appendix

Screen messages

Number repeated

Out of range or no pwr at base

Phone

Put in charger

Quiet mode on

Quiet mode off

Registering...

Ringer muted

Ringer off

Saved

Speaker

To register HS

See manual

Transferred

Unable to call

XX missed calls

** Paging **

The telephone number you have entered is already stored in the directory.

The telephone base has lost power, or the handset is out of range.

The handset is on a call.

The battery is very low. Put the handset in the telephone base or charger for recharging.

The quiet mode is turned on.

The quiet mode is turned off.

The handset registration is in progress.

The handset ringer is muted temporarily during an incoming call.

The handset ringer is turned off.

Your selection has been saved.

The handset speakerphone is in use.

Screen display on a non-registered handset.

You have transferred an outside call to another cordless handset.

The handset is out of range while on a call.

Failed phone call (the telephone line is in use).

Failed intercom call (there are already two handsets being used).

There are new calls in the caller ID log.

All system handsets are being paged.

44

Appendix

Handset and telephone base indicators

Handset lights

CHARGE

On when the handset speakerphone is in use.

On when the handset is charging in the telephone base or charger.

Telephone base lights

IN USE

On when the telephone line is in use.

On when you are registering a handset.

Flashes quickly when there is an incoming call.

Flashes when another telephone sharing the same line is in use.

Flashes when you are deregistering all handsets.

Handset icons

The battery icon flashes when the battery is low and needs charging.

The battery icon animates when the battery is charging.

ECO

NEW

The battery icon becomes solid when the battery is fully charged.

The speakerphone is in use.

The handset ringer is turned off.

There are new voicemail received from the telephone service provider.

The ECO mode activates automatically to reduce power consumption whenever the handset is synchronized with the telephone base.

The entry you are reviewing is new in the caller ID log.

45

Appendix

Battery

It takes up to 11 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation

While in handset use (talking*)

While in speakerphone mode (talking*)

While not in use (standby**)

Up to 7 hours

Up to 3.5 hours

Up to 5 days

Operating time

* Operating times vary depending on your actual use and the age of the battery.

** Handset is not charging or in use.

The battery needs charging when:

A new battery is installed in the handset.

The handset beeps every 50 seconds while on a call.

The handset beeps and Low battery displays on the handset.

Put in charger displays on the handset.

A battery is properly installed and the screen is blank.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

Use only the batteries provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call

1 (800) 267-7377.

Do not dispose of the batteries in a fire. Check with local waste management codes for special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

Exercise care in handling batteries in order not to create a short circuit with conductive materials.

Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Observe proper polarity orientation between the battery and metallic contacts.

To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

46

Appendix

Troubleshooting

If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

My telephone does not work at all.

Make sure the battery is installed and charged correctly (page 3). For optimum daily performance, return the handset to the telephone base or charger after use.

Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.

Make sure the telephone line cord is plugged firmly into the telephone base and the wall jack.

Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to synchronize.

Charge the battery in the handset for up to 11 hours.

If the battery is completely depleted, charge the handset for at least 30 minutes before use

(page 4).

Remove and install the battery again. If that still does not work, it may be necessary to purchase a new battery.

Disconnect the telephone base from the telephone wall jack and plug in a working telephone.

If the other telephone does not work, the problem is probably in the wiring or telephone service. Contact your telephone service provider.

There is no dial tone.

Try all the above suggestions.

Move the handset closer to the telephone base. It may be out of range.

The telephone line cord may be defective. Install a new telephone line cord.

Disconnect the telephone base from the telephone wall jack and connect a different telephone. If there is no dial tone on this telephone either, the problem is in your wiring or telephone service. Contact your telephone service provider.

If you have changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your service provider for more information.

I cannot dial out.

Try all the above suggestions.

Make sure there is a dial tone before dialing. It is normal if the handset takes a second or two to synchronize with the telephone base before producing a dial tone. Wait an extra second before dialing.

If other telephones in your home are having the same problem, the problem is in the wiring or telephone service. Contact your telephone service provider (charges may apply).

Eliminate any background noise. Mute the cordless handset before dialing, or dial from another room in your home with less background noise.

If you have changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your service provider for more information.

47

Appendix

Troubleshooting

To register HS and See manual appear alternately on the handset and it does not work at all.

The handset may be deregistered from the telephone base. Refer to

Add and register a

handset on page 41 to register the handset to the telephone base.

My cordless handset isn’t performing normally.

Make sure you plug the power cord securely into the telephone base. Plug the power adapter into a different, working electrical outlet without a wall switch.

Move the cordless handset closer to the telephone base. You may have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Low battery shows on the handset screen.

Place the handset in the telephone base or charger for recharging.

Remove and install the battery again and use it until fully depleted, then charge the handset in the telephone base or charger for up to 11 hours.

If the above measures do not correct the problem, replace the battery.

The battery does not charge in the handset or the handset battery does not accept charge.

Make sure the handset is placed in the telephone base or charger correctly.

Remove and install the battery again, then charge for up to 11 hours.

If the battery is completely depleted, charge the handset for at least 30 minutes before use

(page 4).

Purchase a new battery. Refer to the Battery section (page 46).

The CHARGE light is off.

Clean the charging contacts on the handset, telephone base and/or charger each month with a pencil eraser or a dry non-abrasive fabric.

Make sure the power adapter and telephone line cord are plugged in properly (page 2).

Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one minute for the handset and telephone base to reset.

48

Appendix

Troubleshooting

The telephone does not ring when there is an incoming call.

Make sure the ringer volume of the handset is not set to off (page 11).

Make sure the telephone line cord and power adapter are plugged in properly (page 2).

The handset may be too far from the telephone base. Move it closer to the telephone base.

There may be too many extension phones on the telephone line to allow all of them to ring simultaneously. Unplug some of them.

If other telephones in your home are having the same problem, the problem is in the wiring or telephone service. Contact your telephone service provider (charges may apply).

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Test a working telephone at the telephone wall jack. If another telephone has the same problem, the problem is in the telephone wall jack. Contact your telephone service provider

(charges may apply).

The telephone line cord may be defective. Install a new telephone line cord.

Remove and install the battery again and place the handset in the telephone base.

Wait for the handset to synchronize with the telephone base. Allow up to one minute for this to take place.

49

Appendix

Troubleshooting

There is interference during a telephone conversation.

My calls fade out when I am using the cordless handset.

The handset may be out of range. Move it closer to the telephone base.

If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.

Appliances or other cordless telephones plugged into the same circuit as the telephone base can cause interference. Try moving the appliance or telephone base to another outlet.

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge protector) into a different location. If this doesn’t solve the problem, relocate your telephone or modem farther apart from each other, or use a different surge protector.

The location of your telephone base can impact the performance of your cordless phone.

For better reception, install the telephone base in a centralized location within your home or office, away from walls or other obstructions. In many environments, elevating the telephone base improves overall performance.

Disconnect the telephone base from the telephone wall jack and plug in a corded telephone.

If calls are still not clear, the problem is probably in the wiring or telephone service. Contact your telephone service provider (charges may apply).

If other telephones in your home are having the same problem, the problem is in the wiring or telephone service. Contact your telephone service provider (charges may apply).

I get noise, static, or weak signals even when I’m near the telephone base.

If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by

DSL interference. Contact your DSL service provider for more information about DSL filters.

You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed.

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.

If you plug your phone in with a modem or a surge protector, plug the phone (or modem/ surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector.

Relocate your phone to a higher location. The phone may have better reception in a high area.

If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).

50

Appendix

Troubleshooting

I experience poor sound quality when using the speakerphone.

For increased sound quality while using the speakerphone, place the handset on a flat surface with the dialing keys facing up.

I hear other calls when using the telephone.

Disconnect the telephone base from the telephone wall jack. Plug in a different telephone.

If you still hear other calls, the problem is probably in the wiring or telephone service.

Contact your telephone service provider.

I hear noise on the cordless handset and the keys do not work.

Make sure the telephone line cord is plugged in securely.

My caller ID features are not working properly.

Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your telephone.

The caller may not be calling from an area which supports caller ID.

Both your and the caller’s telephone service providers must use equipment compatible with the caller ID service.

The caller ID information shows after the first or second ring.

If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.

The telephone does not receive caller ID while on a call.

Make sure you subscribe to caller ID with call waiting features provided by your telephone service provider.

The caller may not be calling from an area which supports caller ID.

Both your and the caller’s telephone service providers must use equipment compatible with caller ID service.

If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.

51

Appendix

Troubleshooting

Out of range or no pwr at base shows on the handset screen.

The handset may be out of range. Move it closer to the telephone base.

Make sure the power cord is securely plugged into the telephone base. Use a working electrical outlet not controlled by a wall switch.

Reset your telephone by unplugging the power adapter from the telephone base. Disconnect the battery from the cordless handset. Wait for 15 seconds, then plug in the power adapter and install the battery again. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize.

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

and New voicemail show on the handset display and I don’t know why.

If and New voicemail appear on the handset, your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from them. Contact your telephone service provider for more information on how to access your voicemail.

I cannot retrieve voicemail messages.

If you subscribe to voicemail service from your telephone service provider (charges may apply), contact your telephone service provider for more information on how to access your voicemail.

I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work.

Make sure your computer is powered on.

Make sure your Internet connection is working properly.

Make sure that the software is installed and running for your nontraditional telephone service.

Make sure to plug your USB telephone adapter into a dedicated USB port on your computer.

Do not plug into a multiple port USB hub (USB splitter) that is not powered.

In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply.

If you are using a firewall, it may prevent access to your nontraditional telephone service provider. Contact your service provider for more information.

52

Appendix

Troubleshooting

I have accidentally set my LCD language to Spanish or French, and I don’t know how to change it back to English.

While the phone is not in use, press MENU once then enter 364#.

While on a call, press

MENU once then enter 364#. Then the call ends automatically.

Common cure for electronic equipment.

If the telephone is not responding normally, put the cordless handset in the telephone base.

If it does not respond, try the following (in the order listed):

1.

Disconnect the power to the telephone base.

2.

Disconnect the battery on the cordless handset.

3.

4.

Wait a few minutes before connecting power to the telephone base.

Install the battery again and place the cordless handset in the telephone base.

5.

Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute for this to take place.

53

Appendix

Important safety instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1.

2.

3.

4.

Read and understand all instructions.

Follow all warnings and instructions marked on the product.

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a

damp cloth for cleaning.

Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or

swimming pool, or in a wet basement or shower.

Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

5.

6.

7.

8.

Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation.

To protect them from overheating, these openings must not be blocked by placing the product on a soft

surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat

register. This product should not be placed in any area where proper ventilation is not provided.

This product should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of power supply in your home or office, consult your dealer or local

power company.

Do not allow anything to rest on the power cord. Do not install this product where the cord may be

walked on.

9.

10.

Never push objects of any kind into this product through the slots in the telephone base or handset

because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind

on the product.

To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service

facility. Opening or removing parts of the telephone base or handset other than specified access doors

may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock

when the product is subsequently used.

11.

Do not overload wall outlets and extension cords.

12.

Unplug this product from the wall outlet and refer servicing to an authorized service facility under the

following conditions:

• When the power supply cord or plug is damaged or frayed.

If liquid has been spilled onto the product.

• If the product has been exposed to rain or water.

If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operation instructions. Improper adjustment of other controls may

result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.

• If the product has been dropped and the telephone base and/or handset has been damaged.

If the product exhibits a distinct change in performance.

13.

Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of

electric shock from lightning.

14.

Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or when the handset is

replaced in its cradle. This is a common event associated with the closing of any electrical circuit.

The user should not plug the phone into a power outlet, and should not put a charged handset into

the cradle, if the phone is located in an environment containing concentrations of flammable or

flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could

create a fire or explosion. Such environments might include: medical use of oxygen without adequate

ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.

15.

Only put the handset of your telephone next to your ear when it is in normal talk mode.

16.

The power adapters are intended to be correctly oriented in a vertical or floor mount position. The

prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or

cabinet outlet.

SAVE THESE INSTRUCTIONS

54

Appendix

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers.

Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at least six inches from the pacemaker.

Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.

Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.

Operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications

Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office.

When the handset is out of range, the handset displays

Out of range or no pwr at base.

If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press . Move closer to the telephone base, then press to answer the call.

If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move closer to the telephone base.

ECO mode

This power conserving technology reduces power consumption for optimal battery performance. The

ECO mode activates automatically whenever the handset is synchronized with the telephone base.

55

Appendix

Maintenance

Taking care of your telephone

Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind.

Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE

POWER CORD AND TELEPHONE LINE CORD FROM THE WALL. Then remove the telephone by the unplugged cords.

Appendix

About cordless telephones

Privacy: The same features that make a cordless telephone convenient create some limitations.

Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.

Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical power is interrupted.

Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference.

Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.

Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.

The RBRC

®

seal

The RBRC

®

seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.

The RBRC

®

program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be illegal in your area.

VTech’s participation in RBRC participating in the RBRC

1 (800) 8 BATTERY

natural resources.

TM

®

® makes it easy for you to drop off the spent battery at local retailers

program or at authorized VTech product service centers. Please call

for information on Ni-MH battery recycling and disposal bans/restrictions in your area.

VTech’s involvement in this program is part of its commitment to protecting our environment and conserving

RBRC

®

is a registered trademark of Rechargeable Battery Recycling Corporation.

57

Appendix

4.

5.

7.

8.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or

“you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the

Consumer for Products purchased and used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized service representative will repair or replace at

VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment.

Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1.

Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or

2.

3.

6.

Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or

Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or

Product to the extent that the problem is caused by use with non-VTech accessories; or

Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or

Product purchased, used, serviced, or shipped for repair from outside the United States of America or

Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or

Product returned without a valid proof of purchase (see item 2 on the next page); or

Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.

58

Appendix

Limited warranty

How do you get warranty service?

To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.

Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the

Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty.

Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the

Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.

What must you return with the Product to get warranty service?

1.

Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and

2.

Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and

Provide your name, complete and correct mailing address, and telephone number.

3.

Other limitations

This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product.

The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification.

State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province.

Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase.

Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof of purchase.

59

Appendix

FCC, ACTA and IC regulations

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.

This Class B digital apparatus complies with Canadian ICES-003.

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the

Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an

RJ14 jack for two lines. See the installation instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer.

60

Appendix

FCC, ACTA and IC regulations

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service.

If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned.

If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

If this product has memory dialing locations, you may choose to store emergency telephone numbers

(e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up.

Perform such activities in off-peak hours, such as early morning or late evening.

Industry Canada

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference, including interference that may cause undesired operation.

The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.

The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the

RENs of all the devices does not exceed five.

This product meets the applicable Industry Canada technical specifications.

Technical specifications

Frequency control

Transmit frequency

Channels

Nominal effective range

Power requirements

Memory

Crystal controlled PLL synthesizer

Handset: 1921.536-1928.448 MHz

Telephone base: 1921.536-1928.448 MHz

5

Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.

Handset: 2.4V Ni-MH battery

Telephone base: 6V AC @ 300mA

Charger: 6V AC @ 300mA

Handset directory:

50 memory locations; up to 30 digits and 15 characters

Handset caller ID log:

50 memory locations; up to 24 digits and 15 characters

61

Index

A

About cordless telephones 57

Add a directory entry 29-30

Add a handset 41

Add a speed dial entry 33

Alphabetical search 31

Answer a call 19

B

Battery 3, 4, 46

Battery charging 4

Battery installation 3

C

Caller ID 35-40

Caller ID log screen messages 40

Call transfer 23

Call waiting 20

Chain dialing 22

Charger installation 2

Charging 4

Check voicemail 22

Clear voicemail 16

Clock 13

D

Date 13

Delete a directory entry 32

Delete a redial entry 21

Delete a speed dial entry 34

Deregister handsets 42

Dial a caller ID log entry 37

Dial a directory entry 31

Dialing pause 29

,

30

,

32

,

39

Directory 28-34

DSL filter 2

E

ECO 45, 55

Edit a directory entry 32

End a call 19

F

Find handset 24

Flash 20

H

Handset indicators 45

Handset layout 9-10

Handset lights 45

Handset locator 24

Handset ringer 11

Handset icons 45

I

Icons 45

Implanted cardiac pacemakers 55

Important safety instructions 54

Indicators 45

Installation 2, 3, 5-6

Intercom 26-27

J

Join a call 25

K

Key tone 17

L

Language 14

Layout 8

,

9

,

10

Lights 45

Limited warranty 58-59

Listening volume 20

M

Make a call 19

Menu 11

Missed call indicator 36

Multiple handset use 25-27

Mute 20

O

Operating range 55

Operation 19-24

62

Index

P

Pacemaker patients 55

Paging handsets 24

Parts checklist 1

Precautions for users of implanted cardiac pacemakers 55

Pulse dialing 18

Q

Quiet mode 12

R

Redial 21

Register a handset 41

Replace a handset 42

Review a caller ID log entry 37

Review the directory 31

Ringer tone 12

Ringer volume 11

S

Safety instructions 54

Screen messages 40, 43-44

Set date and time 13

Settings 11-18

Share an outside call 25

Speed dial 33-34

Store a directory entry 29-30

Store a speed dial entry 33

T

Technical specifications 61

Telephone base installation 2

Telephone base layout 8

Telephone base lights 45

Temporary tone dialing 21

Time and date setting 13

Tone 12, 17

Tone dialing 18, 21

Transfer a call 23

Troubleshooting 47-53

U

Using the menu 11

V

Voicemail 15,16, 22

Volume 11, 20

W

Wall mount installation 5

,

6

Warranty 58-59

Website 23

63

VTECH TELECOMMUNICATIONS LTD.

A member of THE VTECH GROUP OF COMPANIES.

VTech is the registered trademark of VTech Holdings Limited.

Copyright © 2013 for VTECH TELECOMMUNICATIONS LTD.

All rights reserved. Version 3 01/13.

91-006118-010-100

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents