INTEGRA-7 Editor Ver.2 Install Guide

INTEGRA-7 Editor Ver.2 Install Guide
INTEGRA-7 Editor Ver.2 Install Guide
Copyright © 2014 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
02
Contents
Installation and Setup (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANTNOTES
Installation Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Uninstallation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cubase 7.5 Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Trademarks and Licenses
Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
..VST is a trademark and software of Steinberg Media Technologies GmbH.
Launching and Setting-Up INTEGRA-7 Editor Ver.2. . . . . . . . . . . . 4
..The Audio Units logo is a trademark of Apple Computer, Inc.
SONAR X3 Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
..Roland, SuperNATURAL and INTEGRA are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Launching and Setting-Up INTEGRA-7 Editor Ver.2. . . . . . . . . . . . 5
..Copyright 2005, 2012 jQuery Foundation, Inc. and other contributors Released under the MIT license.
Installation and Setup (Mac OS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
..Copyright 2013 jQuery Foundation and other contributors; Licensed MIT.
Installation Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
..Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Uninstallation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
..Company names and product names appearing in this document are registered
trademarks or trademarks of their respective owners.
Cubase 7.5 Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Additional Precautions
Launching and Setting-Up INTEGRA-7 Editor Ver.2. . . . . . . . . . . . 7
..Unfortunately, it may be impossible to restore the contents of data that was stored
in the computer once it has been lost. Roland Corporation assumes no liability concerning such loss of data
Logic Pro X Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Launching and Setting-Up INTEGRA-7 Editor Ver.2. . . . . . . . . . . . 8
..In the interest of product improvement, the specifications and/or contents of this
package are subject to change without prior notice.
About the Owner’s Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Opening the Owner’s Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2
Installation and Setup (Windows)
5. The “Confirm Installation” dialog box appears.
Click [Next] to begin the installation.
Installation Procedure
If the “User Account Control” dialog box appears,
click [Yes].
Use the following procedure to install INTEGRA-7 Editor Ver.2.
NOTE
.. INTEGRA-7 Editor Ver.2 is a 64-bit plug-in.
It cannot be installed in 32-bit versions of Windows.
.. In order to use INTEGRA-7 Editor Ver.2, you must install the USB driver. Download the USB
driver from the Roland website. For details, refer to Readme.htm found in the file that you
download.&http://www.roland.com/support/
6. The “Installation Complete” dialog box appears.
Click [Close] to exit.
.. In order to use INTEGRA-7 Editor Ver.2, you must set the INTEGRA-7’s own USB driver setting
to “VENDER.” Make this setting as described in “Using the INTEGRA-7 with a Computer” in the
INTEGRA-7 owner’s manual.
Uninstallation Procedure
If you need to uninstall INTEGRA-7 Editor Ver.2, proceed as follows.
1. Run “INTEGRA7EditorVer2_x64_en.msi.”
1. Download the INTEGRA-7 Editor Ver.2 installer from the Roland website.
2. The “Welcome to the INTEGRA-7 Editor Ver.2 Setup Wizard” dialog box
appears. Choose “Remove INTEGRA-7 Editor Ver.2” and then click [Finish].
2. Decompress the file that you downloaded, and run “INTEGRA7EditorVer2_x64_en.msi.”
If the “User Account Control” dialog box appears,
click [Yes].
3. The “Welcome to the INTEGRA-7 Editor
Ver.2 Setup Wizard” dialog box appears.
Click [Next].
3. The “Installation Complete” dialog box appears.
Click [Close] to exit.
4. The “Select Installation Folder” dialog box appears.
Click [Next] to begin the installation.
3
Installation and Setup (Windows)
Cubase 7.5 Users
Launching and Setting-Up INTEGRA-7 Editor Ver.2
1. Launch Cubase and create a project.
If you’re using INTEGRA-7 Editor Ver.2 with Cubase 7.5, make the following
settings.
2. Click [Project]-[Add Track]-[Instrument].
3. In the “Add Instrument Track” dialog box, choose [INTEGRA-7 Editor
Ver.2]; then click [Add Track] to plug-in the editor.
Device Settings
1. Launch Cubase, and open [Devices]-[Device Setup].
2. Access the MIDI Port Setup, and set “INTEGRA-7” and “INTEGRA-7 CTRL” as
shown below.
INTEGRA-7 Editor Ver.2 launches.
4. Click the [UTILITY] button, and then click [DEVICE].
Clear the “INTEGRA-7
CTRL” check box.
3. Click [OK] to close the “Device Setup” dialog box.
The “DEVICE” dialog box appears.
5. As the Input Device and the Output
Device, choose “INTEGRA-7 CTRL” and
then click [OK].
This completes the settings.
4
Installation and Setup (Windows)
SONAR X3 Users
Launching and Setting-Up INTEGRA-7 Editor Ver.2
1. Create a project; then click [Insert]-[Soft Synth]-[VST3]-[INTEGRA-7 Editor Ver.2] to plug-in the editor.
If you’re using INTEGRA-7 Editor Ver.2 with SONAR X3, make the following
settings.
Device Settings
1. Launch SONAR, and open [Edit]-[Preferences].
2. Click [MIDI]-[Devices]; then choose “INTEGRA-7” for input and output,
and click [Apply].
2. The “Insert Soft Synth Options” dialog box appears.
Select the check boxes “Simple Instrument Track” and “Synth Property
Page”; then click [OK].
INTEGRA-7 Editor Ver.2 launches.
3. Click the [UTILITY] button and then click [DEVICE].
Clear the “INTEGRA-7 CTRL”
check box.
3. Click [Close] to close the “Preferences” dialog box.
The “DEVICE” dialog box appears.
4. Choose “INTEGRA-7 CTRL” for both
Input Device and Output Device, and
click [OK].
This completes the settings.
5
Installation and Setup (Mac OS)
4. The available installation types are shown.
Click [Install] or [Upgrade].
Installation Procedure
* If the screen asks for authentication, enter your password and click [Install
Software].
Use the following procedure to install INTEGRA-7 Editor Ver.2.
NOTE
5. The “The installation was completed successfully” dialog box appears.
Click [Close] to complete the installation.
.. INTEGRA-7 Editor Ver.2 is a 64-bit plug-in.
It will not work with a 32-bit DAW or with a DAW that was started in 32-bit mode.
.. In order to use INTEGRA-7 Editor Ver.2, you must install the USB driver. Download the USB
driver from the Roland website. For details, refer to Readme.htm found in the file that you
download.&http://www.roland.com/support/
Uninstallation Procedure
INTEGRA-7 Editor Ver.2 is installed in the following locations.
.. In order to use INTEGRA-7 Editor Ver.2, you must set the INTEGRA-7’s own USB driver setting
to “VENDER.” Make this setting as described in “Using the INTEGRA-7 with a Computer” in the
INTEGRA-7 owner’s manual.
.. AU version: [Library] - [Audio] - [Plug-Ins] - [Components]
.. VST version: [Library] - [Audio] - [Plug-Ins] - [VST3] - [Roland]
1. Download the INTEGRA-7 Editor Ver.2 installer from the Roland website.
2. Decompress the file that you downloaded, and run “Integra7EditorV2_
Installer.pkg.”
To uninstall the AU version, delete “INTEGRA7EditorV2.component.”
To uninstall the VST version, delete “INTEGRA7EditorV2.vst3.”
3. The “Welcome to the INTEGRA-7 Editor Ver.2 Installer” dialog box appears.
Click [Continue].
If a screen asks you to select the install destination, click the drive on which
the system is installed, and then click [Continue].
6
Installation and Setup (Mac OS)
Cubase 7.5 Users
Launching and Setting-Up INTEGRA-7 Editor Ver.2
1. Launch Cubase, and create (or open) the project in which you want to
use “INTEGRA-7 Editor Ver.2.”
If you’re using INTEGRA-7 Editor Ver.2 with Cubase 7.5, make the following
settings.
2. Click [Project]-[Add Track]-[Instrument].
NOTE
INTEGRA-7 Editor Ver.2 is a 64-bit plug-in.
3. In the “Add Instrument Track” dialog box, choose [INTEGRA-7 Editor
Ver.2]; then click [Add Track] to plug-in the editor.
It will not work with 32-bit versions of Cubase 7.5.
INTEGRA-7 Editor Ver.2 launches.
Device Settings
4. Click the [UTILITY] button and then click [DEVICE].
1. Launch Cubase, and open [Devices]-[Device Setup].
2. Access the MIDI port settings, and make sure that “INTEGRA-7” is
shown.
The “DEVICE” dialog box appears.
5. Choose “INTEGRA-7” for both Input Device and Output Device, and then click
[OK].
This completes the settings.
3. Click [OK] to close the “Device Setup” dialog box.
7
Installation and Setup (Mac OS)
4. Click the [UTILITY] button and then click [DEVICE].
Logic Pro X Users
If you’re using INTEGRA-7 Editor Ver.2 with Logic Pro X, make the following
settings.
Launching and Setting-Up INTEGRA-7 Editor Ver.2
1. Launch Logic Pro X, and create (or open) the project in which you want
to use “INTEGRA-7 Editor Ver.2.”
2. Click [Track]-[New Software Instrument Track].
5. The “DEVICE” dialog box appears.
3. In the inspector channel strip of the track you clicked, click the instrument module slot; then click [AU Instruments]-[Roland]-[INTEGRA-7
Editor Ver.2]-[Stereo] to plug-in the editor.
6. Choose “INTEGRA-7” for both Input Device and Output Device, and then click
[OK].
This completes the settings.
INTEGRA-7 Editor Ver.2 launches.
8
About the Owner’s Manual
INTEGRA-7 EDITOR Ver.2 includes a PDF-format owner’s manual.
You can open the owner’s manual as described in “Opening the Owner’s Manual,” below.
MEMO
You’ll need Adobe Reader (free of charge) in order to view the owner’s
manual.
Opening the Owner’s Manual
1. Plug-in INTEGRA-7 EDITOR Ver.2 into your DAW.
2. Click the [UTILITY] button.
3. In the list at the left of the screen, click [MANUAL].
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement