Touchjet TP80WUS Video Projector User manual

Add to my manuals
34 Pages

advertisement

Touchjet TP80WUS Video Projector User manual | Manualzz

 

Touchjet  Pond™  Projector  

 

 

 

 

User     Manual  

 

 

©  2015  Touchjet  Pte  Ltd.                           Page0                   www.touchjet.com  

 

Quick  Start  Guide  

Step  1:  Connect  the  Power  Adapter.  

 

 

Step  2:  Slide  and  hold  the  Projector  Power  Slider  Switch  toward  the  front  for  

3  seconds.  The  fan  should  start  spinning  and  the  green  power  indicator  light   should  come  on.  

                             

 

Step  3:  Adjust  the  focus  as  needed.  

 

 

Step  4:  Insert  2  AA  batteries  inside  the  Stylus  then  power  on.  

 

©  2015  Touchjet  Pte  Ltd.                           Page1                   www.touchjet.com  

 

 

Step   5:   Calibrate   your   Stylus   with   your   Touchjet   Pond   Projector   using   the  

Stylus  or  your  Airmouse  remote  to  access  the  calibration  icon  on  the   top  left   corner  of  the  Home  Screen.  

Step  6:  Return  to  the  Home  Screen  and  select  your

 

  first  Android  app  to  use   on  your  projected  touchscreen.  

 

©  2015  Touchjet  Pte  Ltd.                           Page2                   www.touchjet.com  

 

Safety  and  Precautions!  

 

 

DO  NOT  expose  the  Projector,  Stylus  or  Airmouse  to  water  or  wet  surfaces.  

Electric  shock  may  occur.  

DO  NOT  stare  directly  into,  or  directly  expose  others’  eyes  to,  the  bright  LED  

Projected  Light  Source  of  the  Projector.  

 

DO   NOT   block   or   restrict   airflow   from   the   Projector’s   ventilation   holes,   as   this  may  cause  the  Projector  to  overheat.  

 

DROPPING  the  Projector,  Stylus  or  Airmouse  remote  may  cause  damage  and  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  malfunctioning  of  the  devices.  

©  2015  Touchjet  Pte  Ltd.                           Page3                   www.touchjet.com  

Table  of  Contents  

 

A. Touchjet  Pond  Projector  at  a  Glance  

B. What’s  In  the  Box  -­‐  Accessories    

C. Getting  Started  

D. Stylus  Calibration  

E. Connecting  to  WiFi  

F. Signing  in  to  Google  

G. Other  Connections  

H. Specifications  

I. Troubleshooting  Guide  

J. Terms  and  Conditions  of  Use  

K. One-­‐Year  Limited  Warranty  

L. Contact  Information  

 

 

 

 

 

 

 

 

 

Touchjet   and   Touchjet   Pond   are   trademarks   of   Touchjet   Pte   Ltd.   and   its  

  affiliates.  Other  trademarks  are  owned  by  their  respective  owners.  

©  2015  Touchjet  Pte  Ltd.                           Page4                   www.touchjet.com  

A:  Touchjet  Pond  Projector  at  a  Glance  

 

 

The  Touchjet  Pond  Projector  (Projector)  is  a  tiny  handheld  projector  with  an   embedded  Android  system  that  turns  any  surface  into  a  giant  touchscreen.  

The  Projector  combines  a  high-­‐performance  projector  with  a  full  computer   running   the   Android   operating   system   and   about   18   GB   of   built-­‐in   user   memory.  The  image  it  projects  acts  as  a  touch  screen  when  used  with  the  

Stylus   or   Airmouse   remote   (Airmouse).   It   can   work   with   up   to   4   styli   simultaneously  (2  are  provided;  others  may  be  ordered  separately).    

 

The  front  of  the  Projector  contains  the  bright  LED  Projected  Light  Source  (A)  

  and  a  Stylus  Tip  Sensor  that  picks  up  the  positions  of  one  or  more  styli.  On   the   right   side   (as   you   face   the   projection   surface),   there   is   a   Power   Slider  

Switch  (B)  and  a  Focus  Wheel  (C).  On  the  left  side,  there  is  an  Indicator  Light  

(D)  that  glows  green  when  the  unit  is  on.  It  also  has  a  small  built-­‐in

  speaker   for  sound.  

©  2015  Touchjet  Pte  Ltd.                           Page5                   www.touchjet.com  

 

Front  of  Projector  

 

 

Stylus  Tip  Sensor   (A) Projected Light  Source  

Side  of  Projector  

 

 

 

 

 

 

(B)  Power  Slider  Switch   (C)  Focus  Wheel  

 

There  are  4  connectors  on  the  back  of  the  unit:  

(E)   A   DC   In   Connector   for   the   Power   Supply   (included   in   your  

Touchjet  Pond  kit);  

(F)   A   3.5mm   Audio   Jack   to   connect   to   earphones   or   an   external   sound  system;  

(G)   A   Mini   HDMI   Connector   to   repeat   the   display   on   another   TV,  

©  2015  Touchjet  Pte  Ltd.                           Page6                   www.touchjet.com  

  recorder  or  video  system;  and    

(H)   A   Mini   USB   (OTG)   Connector   to   connect   to   a   PC   or   other   accessories  (cable  included  in  your  Touchjet  Pond  kit).  

Back  of  Projector  

 

 

(E)  Power  Supply  

 

 

 

(H)  USB(OTG)Connector  

 

(F)  Audio  Jack  

 

 

 

 

 

 

 

 

 

 

 

On   the   bottom   of   the   Projector   is   a   standard   threaded   camera   mounting   hole  for  use  with  a  tripod.  

©  2015  Touchjet  Pte  Ltd.                           Page7                   www.touchjet.com  

B:  What’s  In  the  Box  -­‐  Accessories  

 

 

 

 

 

 

 

 

Your  Touchjet  Pond  kit  contains  the  following:  

1   Touchjet   Pond   Projector   (Projector)   with   built-­‐in   computer,   Android   operating   system   and   18   GB   of   user-­‐addressable   memory.   A   number   of   useful  Android  apps  come  preloaded  on  the  device.  

 

1  Power  supply  (5vdc,  3A)  to  power  the  Projector  and  recharge  its  built-­‐in   battery  

 

2  Styli  

 

 

1  Airmouse  

 

1  USB  (OTG)  cable  for  PC  hookup  or  accessories  

 

1  User  Guide  

6  AAA  Batteries  (for  the  two  styli  and  Airmouse)  

 

1  Carrying  case  

©  2015  Touchjet  Pte  Ltd.                           Page8                   www.touchjet.com  

Stylus  

Using  infrared  (IR)  sensor  technology  in  the  device  and  included  stylus,  users   can   control   and   interact   with   Touchjet   touchscreen   projections.   The   stylus   contains  a  tiny  infrared  emitter  that  is  captured  by  a  built-­‐in  infrared  camera   and  translated  into  standard  input  for  the  Android  system.  Our  IR  sensor  can   even   support   two   styli   for   multi-­‐touch   apps.   The   stylus   is   fully   compatible   with  any  existing  Android  application.  Your  Touchjet  Pond  kit  comes  with  2  

Styli   that   can   be   used   by   two   people   simultaneously   for   applications   and  

  games.  Two  additional  styli  may  be  used  simultaneously  for  up  to  four  users  

(extra  styli  must  be  ordered  separately).  

 

 

The   Teflon   point   of   the   Stylus   contains   a   small   infrared   (invisible)   light   source  that  can  be  detected  and  located  by  the  Projector.  This  light  source  is   activated  when  you  touch  the  projection  surface  or  press  the  small  Pointer  

Button  (A).  The  longer  Power  Switch  (B)  is  a  slide  switch  to  turn  on  power  to   the  device.  Power  is  turned  on  when  the  slide  switch  is  pushed  toward  the  

Stylus  tip,  covering  the  small  indent  mark.  It  is  turned  off  when  pushed  in

  the  opposite  direction.  To  check  that  the  power  is  on  and  the  batteries  are   still   good,   push   the   Pointer   Button   and   look   at   the   tip   in   a   darkened   environment  or  your  cupped  hand  –  you  should  see  a  faint  red  glow.  

 

©  2015  Touchjet  Pte  Ltd.                           Page9                   www.touchjet.com  

B  

F  

D  

G  

E  

C  

At  the  back  of  the  Stylus  is  a  small  Battery  Cap  (C),  which  may  be  unscrewed   from  the  body.  The  cylindrical  body  holds  two  AAA  batteries,  which  should   both  be  inserted  with  their  positive  ends  (anode)  pointing  towards  the  tip.  

Although  the  Stylus  uses  minimal  power,  it  is  a  good  idea  to  turn  it  off  while   not  in  use  to  preserve  battery  life.  

Airmouse  Remote  

K  

H  

I  

A  

 

The  Airmouse  allows  you  to  control  the  Projector  and  Android  apps  without   touching   the   display   unit.   It   can   connect   to   the   Projector   in   two   different   ways:   by   an   infrared   beam   pointing   at   the   back   of   the   Projector   or   by   a  

 

Bluetooth  (wireless  radio)  connection  (see  instructions  below).    

Refer  to  the  figure  above:  

 

A.  Battery  Case  –  Below  the  button  panel  is  a  white  area  with  the  Touchjet   logo.  Hold  the  Airmouse  upside  down  and  push  to  slide  this  panel  with  your  

©  2015  Touchjet  Pte  Ltd.                           Page10                   www.touchjet.com  

thumbs   to   reveal   a   compartment   for   two   AAA   batteries.   Place   two   AAA  

  batteries  inside  as  indicated,  then  slide  the  panel  closed.  

B.  Power  Button  –  Press  once  to  switch  the  Projector  to  standby  mode,  and   repeat  to  turn  the  power  on.  Alternatively,  the  Power  Slider  Switch  on  the  

 

Projector  has  the  same  function  when  briefly  activated.  

C.  Volume  Control  –  Use  the  volume  keys  to  adjust  the  speaker  volume.    

Note:   There   is   no   volume   control   on   the   Projector   itself.   The   volume  of  the  speaker  may  only  be  adjusted  using  the  Airmouse  or   software   controls   in   the   Settings   Screen   or   in   the   chosen   Android   app.  

 

D.  Home  Key  –  Press  to  bring  up  the  Home  Screen  on  the  projector.  

 

E.   Arrow   Keys   –   These   keys   can   be   used   on   the   Home   Screen   and   other   screens  to  highlight  icons  in  the  direction  of  the  arrow  pressed.    

 

F.  Return  Button  –  Press  to  back  to  the  previous  screen.  

 

G.   Airmouse   Button   –   Press   repeatedly   to   switch   between   airmouse   and   remote  mode.  

 

H.  Press  to  bring  up  the  Source  menu.  

 

I.  Press  to  bring  up  the  Setting  menu  when  there  has  setting  menu.  

 

J.  Press  to  bring  up  the  stylus  calibration  screen.    

  k.   OK   Button   –   When   the   desired   icon   or   function   is   highlighted   with   the   arrow  keys,  press  the  OK  Button  to  activate  it.  

 

©  2015  Touchjet  Pte  Ltd.                           Page11                   www.touchjet.com  

 

To  establish  a  Bluetooth  connection:  

 

Use  the  Airmouse  Home  Button  or  a  Stylus  to  get  to  the  Home  Screen,  then  

  activate   the   “Gear”   icon   to   bring   up   the   Settings   Screen.   Look   for   the  

Bluetooth  Switch  on  the  screen  and  turn  it  on  by  tapping  it  with  the  Stylus.    

On  the  Airmouse,  press  the  “mouse”  button  and  hold  it  for  up  to  5  seconds   until  the  red  indicator  light  starts  blinking  (it  does  not  have  to  be  pointed  at   the  Projector).  It  is  now  ready  for  “pairing”.  

On   the   upper   right   corner   of   the   projected   screen,   select   “Search   for  

Devices.”   A   list   of   available   devices   will   appear,   and   among   them   will   be  

“TJAIR”.  Select  this  device  with  the  Stylus.  The  screen  will  indicate  that  the   devices  are  “paired”  (working  together),  and  the  red  light  on  the  Airmouse  

  will  become  steady.  

You  may  now  point  the  Airmouse  at  the  projected  image  from  a  distance.  

The  cursor  on  the  screen  will  move  as  directed  by  the  Airmouse.  If  you  move   the  cursor  onto  a  selectable  icon,  that  icon  may  be  activated  by  pushing  the  

 

 

 

 

 

 

 

OK  Button.  

The   Airmouse   will   remain   paired   with   the   Projector   thereafter   but   will   go   into  “sleep”  mode  if  not  used  for  a  few  minutes  and  the  red  indicator  turns   off.  Awaken  it  by  pressing  the  Airmouse  Power  Button  just  once.  

©  2015  Touchjet  Pte  Ltd.                           Page12                   www.touchjet.com  

C.  Getting  Started  

1.   Remove   the   Battery   Cap   of   the   Stylus   and   insert   two   AAA   batteries,   anodes  (positive  ends)  toward  the  tip  of  the  Stylus.  Screw  the  cap  back  on   and   slide   the   Power   Switch   on   the   Stylus   toward   the   tip.   Press   the   small  

Pointer  Button  on  the  Stylus  to  make  sure  the  tip  faintly  glows  red.  If  so,  the  

Stylus  is  active.  

2.  Connect  the  Power  Supply  to  the  Projector.  

3.  Connect  the  Power  Supply  to  an  outlet.  

4.  Power  on  the  projector:    

Set   the   projector   up   on   a   tripod   or   flat   surface   and   point   it   toward   the   projection  screen  or  wall.  A  typical  distance  for  clear  viewing  is  1  to  2  meters  

 

(3  to  6  feet).  

Slide   forward   and   hold   the   Power   Slider   Switch   on   the   right   side   of   the   projector  for  3  seconds.  

The  Power  Slider  Switch’s  green  LED  light  (on  the  left  side)  will   turn  on  when  the  projector  is  on.    

In  about  1  minute,  a  display  will  appear  on  the  projection  surface.  

To   put   the   Projector   in   standby   (power-­‐saving)   mode,   press   the   Power  

Button   on   the   Airmouse   or   slide   the   Power   Slider   Switch   on   the   Projector   forward  briefly  (holding  the  Power  Slider  Switch  for  3  seconds  will  shut  the   power   off   completely).   In   standby   mode,   the   optical   engine   should   power   off  and  the  fan  should  stop  spinning.  The  Projector  can  be  turned  on  again   from   standby   mode   and   return   to   the   previously   shown   screen   using   the  

Airmouse   Power   Button   or   by   sliding   the   Power   Slider   Switch   on   the  

Projector  forward  briefly.    

 

©  2015  Touchjet  Pte  Ltd.                           Page13                   www.touchjet.com  

5.  Position  the  Projector  at  a  distance  from  the  projection  surface  that  yields   the  desired  projected  image  size  and  brightness.  Adjust  the  Focus  Wheel  in   front  of  the  Power  Slider  Switch  until  the  image  is  in  sharp  focus.  

 

The  image  should  be  similar  to  the  figure  below:  

 

 

 

 

 

 

 

 

 

6.  Touch  the  active  Stylus  to  the  center  of  the  projected  image  (do  not  block   the  optical  path  between  the  Stylus  tip  and  the  Projector).    

 

 

 

In  order  to  have  accurate  placement  and  interaction  of  the  Stylus,  perform  a  

 

  calibration  (see  next  section).  

©  2015  Touchjet  Pte  Ltd.                           Page14                   www.touchjet.com  

D.  Stylus  Calibration  

1.  Make  sure  your  Projector  is  on  and  that  you  are  projecting  your  screen   onto  on  even  surface  of  your  choice.  

2.   When   you   touch   the   Stylus   to   the   projected   image,   a   white   dot   will   appear.  Move  the  stylus  down  and  to  the  left  of  the  screen  until  the  white   dot  appears  over  the  Target  Mark  (pictured  below).  Tap  the  Stylus  there.  

           

 

 

 

 

©  2015  Touchjet  Pte  Ltd.                           Page15                   www.touchjet.com  

 

3.  Follow  the  onscreen  instructions  to  calibrate  the  Stylus  position.  Keep  the  

  tip  of  the  Stylus  depressed  on  each  mark  for  about  3  seconds.  

Remember  to  hold  the  Stylus  at  an  angle,  as  you  DO  NOT  want  to  block  the   infrared  light  signal  between  the  device  and  the  Stylus.  Also,  make  sure  you   press  down  lightly  on  the  Stylus  when  performing  this  step  to  activate  the  

  signal.  

 

If  you  hold  the  Stylus  on  the  surface  so  the  tip  is  slightly  depressed  and  then   slide   it   around   the   surface,   it   is   like   sweeping   your   finger   on   a   tablet   or   smartphone.  You  can  draw  with  it  or  move  things  around,  depending  on  the  

  app.  

Note:  If  you  do  not  use  the  Stylus  for  more  than  3  minutes  or  so,   the   Projector   puts   its   Stylus   detection   functions   to   sleep   to   save   power.  The  first  tap  of  the  Stylus  thereafter  awakens  the  functions   but  may  not  register  until  the  second  tap  or  movement.    

 

©  2015  Touchjet  Pte  Ltd.                           Page16                   www.touchjet.com  

E.  Connecting  to  WiFi  

 

Before   setting   up   or   signing   in   to   your   Google   account,   you   must   first   connect  your  Projector  to  a  wireless  connection  (WiFi).    

The  Settings  Screen  can  be  accessed  by  clicking  on  the  “Gear”  icon  pictured   below:  

 

 

 

 

 

 

 

Then   turn   on   WiFi   and   select   the   correct   WiFi   device.   After   entering   the   password,  you  should  automatically  be  connected  to  your  WiFi  router.  

Note:   Troubleshooting   for   router   and   WiFi   connection   issues   is   beyond  the  scope  of  this  User  Guide.  For  problems  connecting  to  a   router,   we   suggest   that   you   contact   your   router   manufacturer   or   search  the  Internet  (“Troubleshooting  WiFi  for  Android”).  

 

After  you  are  connected,  you  will  see  the  WiFi  indicator  at  the  top  right  of   the   display.   Tap   anywhere   on   the   screen   to   see   the   Android   menu   on   the   bottom  of  the  screen.  Tapping  the  envelope-­‐shaped  icon  there  will  get  you   back  to  the  Home  Screen.  

 

©  2015  Touchjet  Pte  Ltd.                           Page17                   www.touchjet.com  

F.  Signing  in  to  Google  

Once  you  have  a  connection  to  the  Internet,  you  will  be  presented  with  the   choice  of  logging  on  to  an  existing  Google  account  or  to  create  a  new  one.  

An   email   address   and   password   that   you   use   for   any   of   the   following   applications  will  work  for  your  Google  account:  

Gmail  

YouTube  

Google  Apps  

Any  other  Google  product  

 

Assuming   you   already   have   a   Google   account,   enter   your   username   and   your   password   to   sign   in.   When   you   sign   in,   all   emails,   contacts,   Calendar   events   and   other   data   associated   with   that   account   are   automatically   synced  with  your  device.  If  you  have  multiple  Google  accounts,  you  will  be  

  able  to  add  your  other  accounts  later.  

 

 

 

 

 

 

If   you   do   not   have   a   Google   account,   you   can   create   one   using   your  

Projector  (or  a  PC  connected  to  the  Internet)  by  choosing  a  username  and   password.  It  may  take  up  to  5  minutes  to  connect  to  the  Google  servers.  

 

©  2015  Touchjet  Pte  Ltd.                           Page18                   www.touchjet.com  

 

Once   you   have   signed   in   and   connect   to   the   Google   Play   store,   you   may   download   any   apps   that   you   wish.   Most   Android   apps   work   well   with   the  

Projector.  

 

Note:  The  Projector  does  not  have  the  following  sensors  or  devices   common   to   most   smartphones   and   tablets   and   thus   is   not   guaranteed  to  properly  run  apps  that  use  or  require  these  sensors:  

• Cell  phone  transceiver  

• GPS  receiver  

Compass  

Accelerometers  and  position  sensors  

Camera  

Built-­‐in  microphone  

 

 

©  2015  Touchjet  Pte  Ltd.                           Page19                   www.touchjet.com  

If  you  want  to  delete  an  application  from  system,  please  go  to  setting-­‐>apps   and  click  the  app  that  you  want  to  uninstall.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

©  2015  Touchjet  Pte  Ltd.                           Page20                   www.touchjet.com  

G.  Other  Connections  

 

 

 

 

 

 

 

The  4  connectors  on  the  rear  panel  of  the  Projector  work  as  follows:  

   

DC   In:   For   connecting   to   the   Power   Supply,   which   provides   5   VDC   and   3  

Amps  when  inserted  into  a  wall  socket  providing  between  100  and  240  VAC  

(cable  included  in  your  Touchjet  Pond  kit).  

 

Audio  Out:  When  a  3.5mm  Audio  Jack  is  inserted,  the  built-­‐in  speakers  are   muted  and  the  signal  may  be  used  for  earphones  or  another  external  sound  

  system  (cable  not  provided).  

HDMI:   This   Mini   HDMI   Connector   may   be   connected   to   another   video   source   such   as   a   PC,   recorder   or   video   camera   to   use   the   Projector   as   a   projector  only  (cable  not  provided).  

 

USB:  This  Mini  USB  (OTC)  Connector  can  be  used  for  accessories,  such  as  a  

USB  memory  stick,  mouse  or  keyboard,  or  to  hook  the  Projector  up  to  a  PC  

(cable   provided   in   your   Touchjet   Pond   kit).   To   transfer   data   between   the  

Projector   and   the   PC,   file   transfer   apps   may   be   needed   (check   iTunes   or  

 

Google  Play  stores).    

©  2015  Touchjet  Pte  Ltd.                           Page21                   www.touchjet.com  

H.  Specifications  

 

Item   Description  

 

Optical  Technology  

Multi-­‐Touch  

Light  Source  

LED  Lifetime  

Contrast  

Resolution  

Aspect  Ratio  

Projection  Distance  

Brightness  

Focus  

Lens  Offset  

Internal  Memory  

Internal  Speaker  

USB  

AV  source  

WVGA  0.3”  DLP  

Multi  stylus  based  optical  touch  

RGB  LED  

20,000  hours  

1000:1  

854  x  480  Pixels  (WVGA)  

16:9  (4:3  compatible)  

50  cm  ~  300  cm  (14  ”  ~  85  ”)  

AC  Mode:  Up  to  ANSI  80  Lumens  

Battery  Mode:  Up  to  ANSI  50  Lumens  

Manual  

100%  

4  GB  +  16  GB  (Internal  SD  Card)  

Mono  

Micro  USB;  USB  

Mini  HDMI  

Audio-­‐out  

Cooling  

Power  Supply  

Battery  Type  

3.5  mm  mini  jack  

Active  

Input:  100  ~  240V  AC;  Output:  5V,  3A  DC  

Built-­‐in  4000  mAh,  3.7  V  ,  Li-­‐polymer  rechargeable   battery  

Battery  Lifetime    

Power  Consumption  

120  min  (ECO  mode)  

15W  

Dimensions  (L  x  W  x  H)   108.5mmX97.6mmX33mm  

Weight   273g  

 

©  2015  Touchjet  Pte  Ltd.                           Page22                   www.touchjet.com  

I.  Troubleshooting  Guide  

 

1.     Projector  does  not  turn  on.  

• Is the Power Supply plugged into a live wall outlet? Check the outlet with another device requiring power, such as a lamp.

If so,

• Is the 5v connector fully inserted into the DC In Connector on the Projector? If so,

• Did you slide and hold the Projector Power Slider Switch toward the front for at least 5 seconds? If so,

• Is the green indicator light illuminated on the right side of the

Projector? If not, the unit may be defective. Please contact

Touchjet Customer Support.

• If the green indicator light is on and there is no light coming from the Projector, the unit may be defective. Please contact

Touchjet Customer Support.

 

 

2.  An  image  is  projected  but  does  not  respond  to  the  touches  of  the  Stylus.  

• Is the Power Switch on the Stylus pushed fully toward the ON position (toward the tip)? If so,

• Cradle the tip of the Stylus in your other hand and push the small Pointer Button. Do you see a faint red glow at the tip? If not,

 

©  2015  Touchjet  Pte  Ltd.                           Page23                   www.touchjet.com  

• Unscrew the Battery Cap and assure that there are 2 fresh

AAA batteries inserted with the anodes (plus pole) toward the tip. Repeat the previous step. Do you see a faint red glow at the tip? If not, the Stylus may be defective. Please contact

Touchjet Customer Support.

• If you see the red glow when you push the button and the projected image still does not respond to touches of the Stylus, then o Is there anything (such as your arm or sleeve) blocking the path between the tip of the Stylus and the

Projector? If not, o Try touching the projected image with the Stylus at other points. Make sure you touch with enough pressure to observe the faint red glow at the tip. If it still does not respond, try “re-booting” the Projector.

Slide the Power Slider Switch toward the front of the unit for about 5 seconds until the green indicator light goes off and you feel no fan vibrations. Then slide and hold it again until the green indicator light comes back on. Make sure the Stylus is powered on and try touching the image once more. o If there is still no response, the unit may be defective.

Please contact Touchjet Customer Support.

3.  The  Stylus  calibration  is  not  working.  

 

©  2015  Touchjet  Pte  Ltd.                           Page24                   www.touchjet.com  

• When  you  touch  the  “Calibration  Menu”  icon,  does  the  Calibration  

Menu  Start  Screen  appear?  If  not,  “reboot”  the  Projector:  Slide  the  

Power  Slider  Switch  toward  the  front  of  the  unit  for  about  5   seconds  until  the  green  indicator  light  goes  off  and  you  feel  no  fan   vibrations.  Then  slide  and  hold  it  again  until  the  green  indicator   light  comes  back  on.  Make  sure  the  Stylus  is  powered  on  and  try   touching  the  “Calibration  Menu”  icon  once  more.  If  there  is  still  no   response,  the  projector  may  be  defective.  Please  contact  Touchjet  

Customer  Support.  

• Does  the  Calibration  Menu  Start  Screen  appear,  but  there  is  no   response  after  touching  the  first  corner  calibration  point?  If  so:   o Check  that  the  Stylus  is  powered  properly  (see  item  #2   above).   o Make  sure  there  is  nothing  blocking  the  optical  path   between  the  Stylus  tip  and  the  Projector.   o When  you  touch  the  projection  screen  or  wall,  you  should   see  a  white  dot  appear  very  near  the  Stylus  tip.  If  it  does   not  appear,  the  unit  may  be  defective.  Please  contact  

Touchjet  Customer  Support.   o Upon  seeing  the  white  dot,  move  it  to  the  calibration  point   and  hold  it  there  for  up  to  3  seconds  or  until  the   calibration  point  disappears  and  another  one  appears  in   another  corner.   o Use  the  same  procedure  for  the  other  calibration  points.  

 

 

©  2015  Touchjet  Pte  Ltd.                           Page25                   www.touchjet.com  

4.  The  Airmouse  does  not  work.  

Assuming  the  Projector  is  on  and  projecting  an  image,  before  

“pairing”  the  Airmouse  with  the  Projector,  does  the  “Home”  icon   bring  up  the  Home  Screen?  If  not:   o Remember  to  point  the  Airmouse  at  the  back  of  the  Projector   and  try  again.  If  it  still  does  not  work,   o Remove  the  cover  of  the  Battery  Case  and  make  sure  that  2  

AAA  batteries  were  installed  in  the  correct  manner.   o If  the  “Home”  icon  still  does  not  work,  the  Airmouse  may  be   defective.  Please  contact  Touchjet  Customer  Support.  

If  the  Airmouse  keys  (such  as  the  Home  Key)  work,  but  the  device  will   not  “pair”  with  the  Projector,  then:   o Press  the  “mouse”  key  and  hold  it  for  a  few  seconds  until  the   red  light  next  to  it  begins  blinking.  If  it  does  not  illuminate  or   begin  blinking,  then  the  Airmouse  may  be  defective.  Please   contact  Touchjet  Customer  Support.   o If  the  red  light  is  blinking,  look  on  the  Projector’s  Settings  

Screen  under  Bluetooth  and  select  “Search  For  Devices.”  A  list   of  available  devices  will  appear,  and  among  them  should  be  

“TJAIR”  If  it  does  not  appear,  then  the  Airmouse  or  Projector   may  be  defective.  Please  contact  Touchjet  Customer  Support.  

If  the  Airmouse  is  paired  with  the  Projector,  but  the  cursor  does  not   appear  on  the  projected  image  when  the  mouse  button  is  pressed,   then  the  Airmouse  or  Projector  may  be  defective.  Please  contact  

Touchjet  Customer  Support.  

 

©  2015  Touchjet  Pte  Ltd.                           Page26                   www.touchjet.com  

J.  Terms  and  Conditions  of  Use  

Thank   you   for   purchasing   the   Touchjet   Pond™   Projector   and   associated   accessories   (“Product”)   from   Touchjet   Pte   Ltd.   and   its   affiliates   including  

Touchjet,  Inc.,  a  Delaware  corporation  (“Company”)!     By  using  the  Product,   you  agree  to  the  following  Terms  and  Conditions  of  Use  (“Terms”):  

 

License.  Company  hereby  grants  to  “you,”  the  first  user  of  the  Product  and   any   transferee   of   the   Product   (in   whole   but   not   in   part)   a   limited,   non-­‐exclusive,  non-­‐transferable,  non-­‐sublicensable  license  to  make  personal   and   non-­‐commercial   use   of   the   Product’s   software   (“Software”).     Such   license  shall  terminate  without  notice  upon  your  non-­‐compliance  with  these  

Terms.     A ll  rights  not  expressly  granted  to  you  are  reserved  and  retained  by  

Company.     Company  owns  all  right,  title  and  interest  in  and  to  the  Software   and  all  intellectual  property  relating  thereto.     T he  Software  is  the  property   of   Company   and   protected   by   United   States   and   international   copyright   laws.

 

Restrictions.  The  Product  and  Software  or  any  component  thereof  may  not   be   reproduced,   duplicated,   copied,   sold,   resold   or   otherwise   exploited   for   any  commercial  purpose  without  the  express  written  consent  of  Company.    

You   may   not   incorporate   any   portion   of   the   Software   into   your   own   programs   or   compile   any   portion   of   it   in   combination   with   your   own   programs,   transfer   it   for   use   with   another   product   or   service   or   sell,   rent,   lease,  lend,  loan,  distribute  or  sub-­‐license  the  Software  or  otherwise  assign   any   rights   to   it   in   whole   or   in   part.     You   may   not,   and   you   will   not   encourage,   assist   or   authorize   any   other   person   to,   copy,   modify,   reverse  

©  2015  Touchjet  Pte  Ltd.                           Page27                   www.touchjet.com  

engineer,   decompile   or   disassemble   or   otherwise   tamper   with,   the  

Software,  whether  in  whole  or  in  part,  or  create  any  derivative  works  from   or  of  the  Software.     You  may  not  misuse  the  Product  or  Software  or  use  the  

Product   or   Software   for   any   illegal   purpose.     You   must   comply   with   all   export   and   re-­‐export   restrictions   and   regulations   of   the   Department   of  

Commerce   and   other   United   States   and   other   governmental   agencies   and   authorities  that  may  apply  to  the  Software.

 

Use   of   Third-­‐Party   Services.  When  you  use  the  Software,  you  may  also  be   using  the  services  of  one  or  more  third  parties,  such  as  a  wireless  carrier  or  a   mobile  platform  provider.     Your  use  of  these  third-­‐party  services  is  at  your   own  risk  and  may  be  subject  to  the  separate  policies,  terms  of  use  and  fees   of  these  third  parties.

 

Feedback.   If   you   provide   suggestions,   comments   or   other   feedback  

(“Feedback”)   to   Company,   Company   shall   be   free   to   use,   disclose,   reproduce,   license   and   otherwise   distribute   and   exploit   the   Feedback   as   it   sees  fit,  entirely  without  obligation  or  restriction  of  any  kind  on  account  of   intellectual  property  rights  or  otherwise.

 

Limitation   of   Liability.  COMPANY  SHALL  NOT  BE  LIABLE  FOR  ANY  INDIRECT,  

SPECIAL,   INCIDENTAL,   PUNITIVE   OR   CONSEQUENTIAL   DAMAGES   OF   ANY  

KIND   IN   CONNECTION   WITH   THE   PRODUCT   OR   SOFTWARE,   EVEN   IF  

COMPANY  HAS  BEEN  INFORMED  IN  ADVANCE  OF  THE  POSSIBILITY  OF  SUCH  

DAMAGES.  If  in  any  case  Company  does  have  a  liability  we  do  not  accept  any   liability  for  (i)  any  loss  of  profits  or  use  or  for  the  restoring  or  recovering  of   any  data  corrupted  or  lost  or  (ii)  any  amount  greater  than  the  price  paid  by   you  for  the  Product.  In  jurisdictions  which  do  not  allow  liability  for  certain  

 

©  2015  Touchjet  Pte  Ltd.                           Page28                   www.touchjet.com  

  kinds   of   damages   to   be   limited   or   excluded,   some   or   all   of   the   above   limitations  or  exclusions  may  not  apply  to  you.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Governing   Law.   Except   where   prohibited   or   provided   otherwise   by   applicable   law:   (a)   these   Terms   shall   be   governed   by   and   construed   in   accordance  with  the  laws  of  the  State  of  California,  USA  without  regard  to   the   provisions   thereof   pertaining   to   conflicts   of   laws:   (b)   disputes   and   controversies  arising  out  of  or  in  connection  with  the  Product  or  Software   may   be   resolved   by   the   state   or   federal   courts   located   in   San   Francisco,  

California,   USA,   and   each   of   you   and   Company   agrees   to   submit   to   the   jurisdiction  of  such  courts.  

©  2015  Touchjet  Pte  Ltd.                           Page29                   www.touchjet.com  

K.  One-­‐Year  Limited  Warranty  

 

Touchjet,   Inc.   (“Company”)   offers   the   following   commercial   warranty   to  

“you”,   the   first   user   of   the   Touchjet   Pond™   Projector   (“Product”).   This   warranty  is  in  addition  to  any  legal  rights  you  have  against  Company  or  any   other   person.   These   rights   vary   by   jurisdiction   and   are   not   affected   in   any   way  by  this  warranty.  If  you  transfer  the  Product  to  another  person  they  will  

  also  have  the  benefit  of  this  warranty.  

Company   warrants   the   Product   against   defects   in   materials   and/or   workmanship  under  normal  use  for  a  period  of  ONE  (1)  YEAR  from  the  date   of  purchase  by  the  original  purchaser  (“Warranty  Period”).  If  a  defect  arises   and  a  valid  claim  is  received  within  the  Warranty  Period,  Company  will  either,   at   its   option:   (a)   repair   the   defect   at   no   charge,   using   new   or   refurbished   replacement  parts;  or  (b)  replace  the  Product  with  a  new  Product  that  is  at   least  functionally  equivalent  to  the  original.  A  replacement  Product  or  part,   including   a   user-­‐installable   part   installed   in   accordance   with   instructions   provided   by   Company,   assumes   the   remaining   Warranty   Period   of   the   original   Product.   When   a   Product   or   part   is   exchanged,   any   replacement   becomes   your   property   and   the   replaced   item   becomes   Company’s   property.    

Obtaining   Service.   To   make   a   claim   to   obtain   warranty   service,   send   an   email  to  Company  at  [email protected]  (a)  describing  the  Product’s  defect  

(b)   with   a   copy   of   the   Product’s   purchase   receipt.   Service   options,   parts   availability   and   response   times   will   vary.   If   Company   approves   your   claim,  

  you  will  be  responsible  for  the  return  (and  associated  shipping  costs)  of  the  

Product  or  any  defective  parts  to  Company’s  authorized  service  center.    

©  2015  Touchjet  Pte  Ltd.                           Page30                   www.touchjet.com  

 

Limits   and   Exclusions.   This   Limited   Warranty   does   not   cover:   (a)   damage   caused  by  failure  to  follow  instructions  relating  to  the  Product’s  use  or  the   installation  of  components,  including,  without  limitation,  in  this  User  Guide   or  the  Terms  and  Conditions  of  Use;  (b)  damage  caused  by  accident,  abuse,   misuse,  fire,  floods,  earthquake  or  other  external  causes;  (c)  damage  caused   by  service  performed  by  anyone  who  is  not  a  representative  of  Company;  (d)   accessories  used  in  conjunction  with  the  Product,  whether  or  not  provided   with   the   Product;   (e)   a   Product   or   part   that   has   been   modified   to   alter   functionality  or  capability;  (f)  items  intended  to  be  periodically  replaced  by   you   during   the   normal   life   of   the   Product,   including,   without   limitation,   batteries   and   light   bulbs;   (g)   any   Product   sold   “as   is,”   including,   without   limitation,   floor   demonstration   models   and   refurbished   items;   or   (h)   a  

Product  that  is  used  contrary  to  this  User  Guide  or  the  Terms  and  Conditions  

  of   Use,   including   without   limitation,   commercially   or   for   a   commercial   purpose.    

TO  THE  EXTENT  PERMITTED  BY  APPLICABLE  LAW,  COMPANY  DISCLAIMS  ANY  

AND   ALL   STATUTORY   OR   IMPLIED   WARRANTIES,   INCLUDING,   WITHOUT  

LIMITATION,   WARRANTIES   OF   MERCHANTABILITY,   FITNESS   FOR   A  

PARTICULAR   PURPOSE,   NON-­‐INFRINGEMENT   AND   WARRANTIES   AGAINST  

HIDDEN   OR   LATENT   DEFECTS.   IF   COMPANY   CANNOT   LAWFULLY   DISCLAIM  

STATUTORY  OR  IMPLIED  WARRANTIES,  THEN  TO  THE  EXTENT  PERMITTED  BY  

LAW,   ALL   SUCH   WARRANTIES   SHALL   BE   LIMITED   IN   DURATION   TO   THE  

DURATION   OF   THIS   EXPRESS   LIMITED   WARRANTY.   Some   jurisdictions   disallow   the   exclusion   or   limitation   of   implied   warranties,   so   the   above   exclusions   or   limitations   may   not   apply   to   you.   This   warranty   gives   you  

  specific   legal   rights   and   you   may   also   have   other   rights,   which   vary   from   jurisdiction  to  jurisdiction.  

©  2015  Touchjet  Pte  Ltd.                           Page31                   www.touchjet.com  

 

L.  Contact  Information  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Customer  Service:  [email protected]  

 

 

Address:  599,  2nd  Street,  San  Francisco,  CA  94107  USA  

 

©  2015  Touchjet  Pte  Ltd.                           Page32                   www.touchjet.com  

 

 

 

©  2015  Touchjet  Pte  Ltd.                           Page33                   www.touchjet.com  

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement