Thank you for showing your confidence in us by purchasing the BEHRINGER ROTARY
MACHINE RM600. This ultimate effects pedal delivers the whole history of 3-dimensional
rotary speaker effects—at the touch of a footswitch. Experience the classic and swirling
sounds of famous signature rotary speakers in one compact pedal.
Top view
The FAST control adjusts the rotating speed of the drum and the horn when FAST
is activated via footswitch (see
). The range does not overlap with the SLOW
The SLOW control adjusts the rotating speed of the drum and the horn when SLOW is
activated via footswitch (see
). The range does not overlap with the FAST control.
The DRIVE control adjusts the amount of tube-like overdrive. In minimum position
the tube stage will be bypassed
The BLEND control adjusts the balance between the horn and the drum speaker.
Turning it to the right will boost the volume of the horn and lower the volume of the
The RAMP switch controls the time it takes to go from fast to slow rotary speed
and vice versa. You can select between FAST, MED and SLOW ramp time.
The MODEL switch selects between 3 famous signature rotary speakers (145,
L16 and 122).
The two color ON/BATT LED illuminates when active. The modulation is in slow
mode when the LED lights more red than blue, and it is in fast mode when the LED
lights more blue than red. The change from blue to red is synchronized with the
actual modulation speed.
Press the footswitch to activate/deactivate the effect. Hold the pedal depressed
for 2 seconds in order to switch between fast and slow modulation modes.
Use the 1/4" TS IN A and IN B connectors to plug in the instrument cables. For mono
use plug in IN A only.
The two 1/4" TS OUT A and OUT B connectors send the signal to your amp. Use
both connectors if you want to achieve full stereo rotary effect. For mono use plug
in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The RM600 has no on/off switch. As soon as you insert a plug into one of the
IN connectors, the RM600 begins running. When not using the RM600, remove
the plugs from the IN connectors. This extends the life of the battery.
The SERIAL NUMBER is located on the underside.
In rare cases interferences of the normal function may appear by external
influence (e.g. electrostatic discharge), as for example sound
disturbances or malfunctions. If this occurs, please turn down the volume
on subsequent amplifiers and disconnect the input connector briefly to
restart the application.
For our current warranty terms, please refer to our website at
Power supply
Power connector
Power consumption
Dimensions (H x W x D)
Connector: 1/4" TS
Impedance: 500 kΩ
Connector: 1/4" TS
Impedance: 500 kΩ
Connector: 1/4" TS
Impedance: 1 kΩ
Connector: 1/4" TS
Impedance: 1 kΩ
9 V_, 100 mA regulated
120 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
220 V~, 50 Hz
220 V~, 60 Hz
100 V~, 50/60 Hz
2 mm DC jack, negative center
9 V type 6LR61
60 mA
approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5")
approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.
Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice sólo accesorios y aditamentos autorizados. No intenté
reparar el producto usted mismo. Contacte a nuestro personal técnico cualificado para servicio y reparaciones, especialmente
cuando la fuente o el cable de alimentación estén dañados.
Не эксплуатируйте прибор вблизи от источников воды и тепла. Применяйте только авторизованные дополнительные
устройства. Никогда не ремонтируйте прибор самостоятельно. Ремонт может производить только квалифицированный
специализированный персонал, особенно при повреждениях сетевого провода или сетевой вилки.
Die deutsche Anleitung ist erhältlich @
Manuel francophone en téléchargement sur
Manual en español disponible en
Manuali italiani disponibili @
Русскоязычное руководство @
Polska instrukcja dostępna jest pod adresem @
Nederlandse handleiding beschikbaar @
Suomenkielinen käyttöohje saatavilla osoitteesta
Svensk manual finns tillgänglig på
Dansk vejledning findes på @
Manual português disponível @
Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time
of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part
upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product.
Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have
absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may
be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any
kind, for any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER, the BEHRINGER
logo and JUST LISTEN are trademarks of BEHRINGER. ALL RIGHTS RESERVED. © 2007 BEHRINGER International GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
Responsible party name:
MUSIC Group Services USA, Inc.
18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
Phone/Fax No.:
Phone: +1 425 672 0816
Fax: +1 425 673 7647
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group can void the user’s
authority to use the equipment.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF