Tooling and Testing
Section
H
Tooling and Testing
Tooling
Cable Cutters
Cable Strippers / Slitters
Crimp Tools
UTP/FTP Cable Punchdown Tools
T28 and T36 Cable Tackers
Curing Oven
Polishing Plate
Polishing Pucks
Fibre Scribes
Kevlar Scissors
4
5
8
9
9
10
10
10
11
11
Testing
OWL ZOOM II Series – Optical Power Meter
Dual OWL Series – LED Light Source
Laser OWL Series – Single Mode Light Source
OWL ZOOM II Series – Power Meter and Light Source Kits
OWL WaveTester Series – Optical Loss Test Sets
OWL Precision Coupled Visual Fault locator
Fiber OWL 4 – Optical Power Meter
Fiber OWL Series – Power Meter & Light Source Kits
OWL BOLT Series – Optical Length Tester
Fluke DTX CableAnalyzer™ Series
Fluke DTX 10 Gig Solution
Fluke DTX Compact OTDR
Fluke DTX Fiber Modules
Fluke DSP-4000 Series Digital CableAnalyzers
Fluke DSP-LIA102S Permanent Link Adaptor Set
Fluke DSP-4000 Series Fibre Test Adaptors
Fluke CableIQ Qualification Tester and Kits
Fluke MicroScanner2 Copper Verification Tester
Fluke NetTool Series II
Fluke LinkRunner Pro Network Multimeter
12
13
14
14
15
16
17
18
19
20
21
22
24
25
26
27
28
30
31
32
continued overleaf
H1
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Section
Total Solution Funding
Mayflex has formed a partnership with
Genesis Capital Plc to provide additional and
innovative ways in which to sell networking,
security and infrastructure solutions.
Lease hire allows you to preserve the resource of cash flow within your
business. Various funding options are available including deferred starts,
stepped payments and seasonal profiles.
Tooling and Testing
H
(continued)
Fluke IntelliTone™ Pro Testers and Probe
Fluke FiberInspector™ Mini
Fluke Fiber Verification Kits
Fluke CIQ-FTK Fiber & Copper Technician Kit
Fluke SimpliFiber
Fluke FiberViewer Microscopes
Fluke Fiber Optic Cleaning Kits
Fluke Visible Light Sources
Fluke OMNIScanner Consumables
Quintest Structured Cabling Tester
KD Optics Talk Sets
Optical Fyberscope
OVF-1 – ‘Pen-size’ Visual Fault Locator
MTS-6000 – Compact Optical Test Platform
33
33
34
35
36
37
37
38
38
39
40
41
41
42
By offering tax based lease hire facilities (in addition to loans and hire
purchase), Genesis Capital may be able to help your clients reduce the real
or net cost of their purchase. Lease rentals are normally treated as 100% tax
allowable operating costs making this route a really sensible way to buy
products and services.
Using lease hire helps you close a higher volume of sales. It will improve
your cash flow at the same time as reducing your exposure to bad debt and
ultimately gives you more control over the sale.
Please call our Sales Office for further details
H2
H3
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Tooling
Cable Cutters
Cable Cutters
100 Pair Cutter
A range of cable cutting and preparation tools are available to suit a
wide range of copper and fibre cables. These come competitively
priced and of a high quality.
Features
●
●
Up to 100 pair telephone cable
can be cut
●
Return spring built in
●
Blade is kept closed by latch
when not in use
Moulded plastic handles
Description
Side Cutters
Part Number
100 Pair Cutter
202-048
Features
●
Suitable for general purpose
cutting and trimming
●
Vinyl dipped handles
Description
Part Number
Side cutters
202-043
Cable Strippers/Slitters
UTP/FTP Cable Strippers
The toggle stripper removes the outer sheath of cables with an
outside diameter of upto 11mm by simply rotating the tool in 360°
around the cable.
Cable Cutters
Features
●
●
Range of sizes available for
cables up to 13mm in diameter
Features
●
Blue vinyl non-slip handle grips
Flattening of the cable is
prevented by the rounded jaws
position
●
Lightweight, easy to use
●
Supplied with set of blades
●
Ensures nick free preparation
of cables
Description
Part Number
Toggle Stripper - removes jacket of UTP/FTP
Description
45-514
Part Number
Cutting dia <9mm
202-044
Cutting dia <11mm
202-045
Cutting dia <13mm
202-046
Patch Cable Jacket Stripper
Features
●
Data T Cutter
Description
Features
●
Cuts round multi-pair copper
cables up to 0.5” diameter
●
Bolt cutter for central strength
steel members
Description
Data T Cutter
H4
Suitable for tight jacket cables
– 2.4-3.2mm
Jacket Stripper
●
Cushioned handles
●
Blade is kept closed by latch
when not in use
●
Blade returned to open position
by spring action design
Part Number
202-049
Part Number
202-047
H5
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Cable Strippers/Slitters
Cable Strippers/Slitters
Heavy Duty Jacket Stripper with Swivel Blade
Primary Buffer Strippers
Features
Features
●
Suitable for cables of 8-25mm
diameter
●
Can be used for CST armour
stripping
●
Blade depth is adjustable to
prevent damage to subunits by
up to 4.5mm
●
●
●
Circumferential and longitudinal
cuts can be performed by a
blade which rotates by 90
degrees
●
Industry standard tool for the
removal of 250µm buffers
●
Requires no adjustment, factory
set
●
Blade has precision laser drilled
127µm hole for all 125µm clad
fibres
●
Handles return jaws to open
position when not in use
Six rollers support the cable
during cutting
Description
Consistency provided by a
locking blade
Description
Part Number
Heavy duty stripping tool 8-25mm
202-061
Spare blade
202-062
Features
●
Stripping tools available to suit
14.3mm diameter cables
●
Blade depth can be adjustable
to suit thickness of jacket
●
Blades for radial and
longitudinal cuts
●
Three straight and one round
blade supplied with each tool
Description
Features
●
Incorporates the same buffer
removal technology as the
industry standard (O 103-S) tool
●
Dual-hole versions for 2-3mm
and 900µm removal, or 2-3mm
and 250µm removal
●
Tri-hole tool removes 2-3mm
tight jacket, 900µm secondary
buffer and 250µm primary
coatings
●
Requires no adjustment, factory
set
●
Jaws return to the open
position when not in use
Part Number
Tri-hole 2-3mm, 900µm, and 250µm stripper
up to 3.2mm cable diameter (grey handle)
202-063
3.2-5.5mm cable diameter (blue handle)
202-064
6.4-14.3mm cable diameter (blue handle)
202-065
Clauss No Nik Buffer Strippers
4.8-8mm cable diameter (black handle)
202-066
Features
Spare blades for 45-162, 45-163, 45-165
202-067
Spare blades for 45-164
202-068
Features
Blade has two holes
Tight jacket patch cable is
stripped by 1mm hole
Description
Clauss Fibre stripper
H6
Description
Part Number
Clauss Buffer/Jacket Stripper
●
202-090
Tri Hole Strippers
Peg Style Jacket Stripper
●
Part Number
Stripping tool
●
Industry standard tools for
removing secondary and
primary buffers from fibres
●
Range of sizes with cutting
diameter 102µm to 1.37mm
Description
●
●
202-078
●
Plastic heads support the fibre
on both sides of the blades
●
Strips fibre without cuts,
scratches or niks
Part Number
Spring action handles can be
locked when not in use
Gold 152µm
202-072
Red 203µm
202-073
140µm hole strips 250µm
primary buffer
Light Blue 254µm
202-074
White 305µm
202-075
Dark Green 356µm
202-076
Yellow 457µm
202-077
Part Number
202-089
H7
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Crimp Tools
UTP/FTP Cable Punchdown Tools
UTP/FTP Cable Crimp Tool
The AMP RJ45 Crimp Tool is compatible with the entire utp and FTP
standard connector range.
High quality Amp
manufactured product
Features
35-485
Features
●
Punchdown tools are used to terminate cable into IDC Blocks in Patch
Panels or work outlets.
●
●
Ratchet action ensures
reliable crimping
Description
●
Description
Part Number
Amp RJ45 fixed die, modular plug, crimp tool
Choose from Krone or 110 IDC
22-0010
Either tool will terminate KATT
IDC product
Part Number
Punchdown tool, BT reference 2A
35-480
110 punchdown tool
35-485
Replacement blade set for 35-485
35-495
35-480
Coaxial and UTP/FTP Cable Crimp Tools
The Ideal Crimpmaster is one of the most versatile crimptools
available. A wide range of die sets mean it is suitable for coax as well
as UTP and FTP cable.
Features
●
High quality ratchet tool
●
Easily interchangeable dies
●
Maximum versatility in a
single tool
Description
Part Number
Crimpmaster crimp tool frame
30-506
Crimpmaster die set, 8 position RJ45, Amp compatible
30-560
Crimpmaster die set, RG58, 59, 62, URM70
30-581
Fibre Connector Crimp Tool
Features
H8
●
Used for crimping connector
strain relief crimp rings
●
Correct pressure is applied as
the cycle ratchet prevents the
tool being opened until the dies
have been completely closed
●
T28 and T36 Cable Tackers
The rapid T28 and T36 are High Quality Fast Action Cable Tackers
designed specifically for voice and data cabling.
Features
●
Suitable for Cables up to
4.5mm Diameter (T28)
●
Suitable for Cables up to
6.0mm Diameter (T36)
●
Description
Choice of Galv or White Staples
Part Number
T28 Cable Tacker unit
350-075
T28 11mm Galv Staples, Pack of 5000
350-077
T28 11mm White Staples, Pack of 5000
350-079
T36 Cable Staples Unit
350-080
T36 14mm Galv Staples, Pack of 5000
350-082
T36 14mm White Staples, Pack of 5000
350-084
Different connector styles are
suited with a wide range of
tools
Cavity Shapes
Cavity Size
Part Number
1 round, 2 hex
.105", .090", .190"
202-069
3 hexagonal
.151", .178", .213"
202-070
3 round
.138", .165", .195"
202-071
H9
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Curing Oven
Polishing Puck - Metal
Features
Features
●
Industry standard oven for the
curing of epoxy used in fibre
optic connector terminations
●
Removable oven block can
accept up to 24 SC, ST, SMA or
FC connectors
●
Temperatures can be varied
between 65˚C and 125˚C
●
Oven blocks for ESCON, MTRJ,
FDDI and LC
●
Thermostat control
●
●
Temperature monitoring
provided by dial gauge
thermometer
110Vac and 230Vac versions
available
Description
●
Range of metal hard wearing
polishing pucks
●
The connector ferrule is held
perpendicular to the polishing
surface
●
Universal free floating pucks for
2.5mm ferrule connectors
●
Free floating pucks hold ferrule
only and must be held in light
contact with the polishing film
●
Ferrule is normally held in
contact with film by connector
spring pressure, however the
locking pucks require the
connector body to be mated
with the puck
●
Locking pucks are specific to a
type of connector
Part Number
230Vac oven including connector block
202-081
Description
Spare connector block for FDDI (x4), ST,SC,SMA,FC (x12)
202-082
LC Metal Puck
Part Number
202-087
Spare connector block - 24 port ST,SC,SMA,FC
202-083
Universal Puck - FC/SC/ST
202-088
Spare connector block for LC (x24)
202-084
Spare connector block for MTRJ (x15)
202-085
Fibre Scribes
Features
Polishing Plate
●
During connector termination it
cleaves the sprig of fibre
●
Diamond and Sapphire tips
available
●
Gently pull the fibre after using
the scribe to nick the fibre as
close to the ferrule as possible
●
Pen style designs
●
Cleave will propagate across
the fibre
Features
●
Hand polishing of fibre optic connectors can be performed on the
smooth clean flat surface the glass plate provides
Description
Part Number
Glass polishing plate
202-086
Description
Polishing Puck - Plastic
Part Number
Diamond with 90˚ Wedge Tip
202-091
Sapphire
202-092
Features
●
Economy polishing pucks
●
The connector ferrule is held
perpendicular to the polishing
surface
Manufactured from hard
wearing engineering polymer
Kevlar Scissors
●
●
Universal free floating pucks for
2.5mm ferrule connectors
These general purpose scissors are suitable for trimming Kevlar or
aramid yarns and for cutting light duty cables. The carbon steel
blades are chrome plated and have a cutting length of 40mm.
Description
Universal 2.5mm puck (ST,SC,FC)
Part Number
200-878
Description
Kevlar Scissors
H 10
Part Number
202-093
H 11
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Testing
Dual OWL Series – LED Light Source
OWL Test and Measurement
The Dual OWL is a cost effective handheld light source. The
temperature compensated outputs are calibrated to couple –20dBm of
optical power into multimode fibre. The units are available in single
850nm or 1300nm versions, or with both sources installed as
standard. Ease of use is assured with a single switch controlling
power and output wavelength selection. LED indicators highlight the
selected source and verify that battery power is sufficient to maintain
the calibrated output power.
Optical Wavelength Technology (OWL) are a leading US based
manufacturer of light sources, power meters, optical loss test sets and
handheld certification kits for both multimode and singlemode fibre
cabling. OWL certification tools simplify the process of certifying fibre
systems to industry standards by performing all link budget
calculations and indicating a pass or fail result based on the standard
selected by the user from the instrument menu. Once stored,
professional reports can be produced using the OWL reporting
software which is provided with the equipment. Mayflex offers the
following OWL equipment from stock.
For purchase, hire costs, or for a demonstration on the equipment
shown below, please call our sales office.
ZOOM II Series – Optical Power Meter
ZOOM II (Zeroed Output Optical Meter) is an affordable entry level
power meter solution for multi and singlemode installations. Reference
values stored for each wavelength are used for optical loss readings.
The unit’s user friendly interface includes selector switches for power
and wavelength selection and a push for setting references and
toggling between optical power and optical loss. ZOOM meters do
not offer a data storage facility, please refer to the WaveTester Series
or Fiber OWL series on the following pages if this level of functionality
is required.
Features
Specification
●
Universal 2.5mm connector
port
Measurement Range
+3 to -52 dBm
●
Multimode and singlemode
ready
Absolute Accuracy
+/– 0.24dB
●
Cost effective
●
Extended battery life – 15
hours on one 9v battery
Wavelength Range
750 to 1700nm
●
Easy to read LED display
Calibrated Wavelengths
850nm, 1300/1310nm, 1550nm
●
Single button setting for zero
reference
Resolution / Precision
0.1dB / +/– 0.20dB
Description
ZOOM Optical Power Meter
H 12
Features
Specification
●
Stable temperature
compensated LED source
Output Power
-20dBm into multimode
●
Available at 850nm and/or
1300nm
Initial Accuracy
+/– .10dB @ 25°c
●
Selected source, low battery
indicator LED’s
Calibrated Wavelength
850nm, 1300nm
●
ST or SC connectivity
●
Extended battery life – about
40 hours on one 9v battery
Spectral Width
35nm @850nm,
170nm @1300nm
●
Single switch operation
Description
Part Number
Dual OWL 850nm light source – ST connectivity
210-210
Dual OWL 1300nm light source – ST connectivity*
210-212
Dual OWL 850nm light source – SC connectivity*
210-214
Dual OWL 1300nm light source – SC connectivity*
210-216
Dual OWL 850/1300nm light source – ST connectivity
210-218
Dual OWL 850/1300nm light source – SC connectivity
210-220
* These items are available on a lead time of 1 week.
Part Number
210-005
H 13
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Laser OWL Series – Single Mode Light Source
WaveTester Series – Optical Loss Test Sets
The Laser OWL is a cost effective, compact, handheld laser light source. The temperature
compensated outputs are calibrated to couple -10dBm of optical power into a 9 micron
single mode fibre. The light source is offered with a 1310nm and a 1550nm laser installed.
WaveTester kits offer the fibre optic professional some of the best
values in the industry. Whether performing standards-compliant
testing, or just simple optical loss tests, there is a WaveTester kit
configuration to meet nearly every need.
The source is simple to operate with a single switch controlling power and selecting the
output wavelength. LED indicators highlight the selected source and verify that battery power
is sufficient to maintain the calibrated output power.
Features
Specification
●
Highly stabilized
●
Rugged & Economical
Output Power
-10dBm into singlemode
●
-10dBm Calibrated Output
(Customizable)
Initial Accuracy
+/– .10dB @ 25°c
●
Compact Size
●
Photodiode Compensated
Calibrated Wavelength
1310nm, 1550nm
●
Extended Battery Life
●
Low Battery Indicator
●
NIST Traceable
●
Available with FC, SC, or ST
fibre connectors
Centre Wavelength
1310nm +/- 30nm,
1550nm +/- 30nm
Spectral Width
2nm @ 1310nm,
2nm @ 1550nm
WaveTester stores up to 100 link test results to be downloaded to the
PC via the OWL reporting software. Once downloaded simply run the
Link Budget Wizard to produce full standards certification reports.
WaveTester Auto-Test fibre optic test kits offer conveniences not found
in many test kits in its class, including automatic wavelength switching
and automatic data point storage, both of which save valuable
testing time. Single-port dual-wavelength sources eliminate the need
for separate reference cables, and also allow some versions to
have an optional VFL installed. Need all four wavelengths? The
quad-wavelength test kit gives you 850, 1300, 1310, and 1550nm all
in one source.
Description
Part Number
WaveTester Multimode Kit with ST Connectivity
210-246
Part Number
WaveTester Multimode Kit with SC Connectivity
210-247
Laser OWL 1310/1550nm laser source – ST connectivity*
210-241
WaveTester Multimode Kit with ST Connectivity
Laser OWL 1310/1550nm laser source – SC connectivity*
210-242
and Inbuilt VFL
Laser OWL 1310/1550nm laser source – FC connectivity*
210-243
WaveTester Multimode Kit with SC Connectivity
Description
and Inbuilt VFL
* These items are available on a lead time of 1 week.
ZOOM II Series – Power Meter and Light Source Kits
Features and specifications of individual units are as described on pages H12-13.
Kit costs are lower than the separate purchase cost of the above units.
Description
Zoom power meter + Dual OWL 850/1300nm light source
– ST connectivity
Zoom power meter + Dual OWL 850/1300nm light source
– SC connectivity
Zoom power meter + Dual OWL 850/1300nm light source
+ Laser OWL 1310/1550nm Laser Source – ST connectivity
Zoom power meter + Dual OWL 850/1300nm light source
+ Laser OWL 1310/1550nm Laser Source - SC connectivity
210-248
210-249
WaveTester Singlemode Kit with ST Connectivity
210-250
WaveTester Singlemode Kit with SC Connectivity
210-251
WaveTester Singlemode Kit with ST Connectivity
ZOOM II kits combine the power meters and light source detailed on pages H12-13 and are
ideal as entry level solutions for testing where data storage is not required.
H 14
WaveTester kits include a WaveTester optical power meter, your
choice of light source combinations, a hard-shell carrying case,
protective rubber boots, lanyard straps, and OWL Reporter software
and operations guide on CD.
and Inbuilt VFL
WaveTester Singlemode Kit with SC Connectivity
and Inbuilt VFL
210-252
210-253
WaveTester Quad Wavelength Kit with ST Connectivity
210-254
WaveTester Quad Wavelength Kit with SC Connectivity
210-255
Part Number
210-224
210-226
210-244
210-245
H 15
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Precision Coupled Visual Fault locator
Fiber OWL 4 - Optical Power Meter
The PCVFL (Precision Coupled Visual Fault Locator) is a light-weight,
hand-held tool used to quickly troubleshoot faults in the continuity of
both single mode and multi-mode fibres, especially at fibre launch
points or in OTDR dead zones. The 635nm high intensity visible red
laser beam is precision-coupled into an optical fibre; breaks and
micro-bends in the fibre deflect the red light into the fibre jacket,
producing a clearly visible red glow at the point of the fault.
Common faults detected include breaks in patchcords and defective
splices. PCVFL can also be used to visually identify correct
distribution of fibres in patch panels.
Features
Specification
●
Visual Range
up to 5 km (3.1 miles)
●
High-intensity visible laser
allows for visible fault location
of breaks and microbends in
both singlemode and
multimode fibres
Both Continuous Wave mode
and Pulsed mode allow for
easy fiber identification
Optical Output
-2 dBm (minimum) red laser
Optical Transmission
Continuous wave or pulsed at
6 Hz w/12.5% duty cycle
Dimensions
4.94 x 2.75 x 1.28 in
The Fiber OWL 4 is a high accuracy, high resolution advanced optical power meter with
automatic wavelength detection and switching. This unique feature removes the need for
user intervention when testing at multiple wavelengths when using the WaveSource, auto
switching sources. Its 75dB dynamic range makes the unit ideal for both multi and single
mode testing. This unit’s design features a large backlit graphic LCD display and 18 key
keypad for easy data entry.
The universal adaptor accepts ST, SC and LC connectors.
Fiber OWL 4 includes a built in loss wizard providing an easy method of calculating the
allowable loss of each fibre run. The meter can store a variety of data per installed fibre for up
to eight sites, including information such as site name, fibre and connector type, in addition up
to 1000 measured data points can be stored. This stored information can then be selectively
viewed, edited, printed or deleted. Printing can be performed directly from the unit’s serial
port, imported to a spreadsheet or downloaded using the included OWL Reporter software to
product formatted certification reports.
Fiber OWL 4 is available with optional inbuilt optical length tester.
Features
●
Universal 2.5mm connector
port – ST, SC, LC compatible
Data storage of up to 1000 links
●
OWL Reporter software for
printing formatted certification
reports
●
Large backlit graphical LCD
display
●
Extended battery life – over 200
hours on one 9v battery
●
RS-232 interface for report
printing or data downloading
●
Automatic Wavelength
Detection and switching
●
Optional Inbuilt fibre length
tester
●
Standard ST connector
●
Simple single-switch
operation
●
CW Mode - 15 hours use on
one 9v battery
●
Pulsed Mode - 120 hours use
on one 9v battery
Supported Cabling Standards
●
Low-battery indicator
●
EIA/TIA 568
●
10Base-FB/FL
●
ATM-155/622
●
Hand-held
●
ISO/IEC11801
●
FDDI
●
Fibre Channel
●
Lightweight
●
100Base-FX
●
Token Ring
Description
Visual Fault Locator
Weight
6 ounces
Part Number
210-208
Specification
Measurement Range
+5 to -70 dBm (FO-4FX)
Absolute Accuracy
Absolute accuracy +/- 0.15dB
NIST traceable calibrated wavelengths
850nm, 1300, 1310nm, 1550nm
Additional factory calibrated wavelengths
980nm, 1490nm, 1625nm
Resolution
0.01dB
Precision
+/- 0.10dB
Description
H 16
●
Part Number
Fiber OWL Optical Power Meter
210-256
Fiber OWL Optical Power Meter with inbuilt fibre length meter
210-257
H 17
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Fiber OWL Series – Power Meter and Light Source Kits
BOLT Series – Optical Length Tester
Fiber OWL kits offer three basic kit options:
BOLT stands for Beaming Optical Length Tester and offers a unique,
low cost unit for users that need to measure the length of optical fibres.
Manual Test Kits
Fiber OWL 4 power meters with manual Dual OWL and Laser OWL
light sources and are ideal budget solution for testing where data
storage and link certification is required.
AutoTest Kits
Fiber OWL4 power meters with waveSource automatic wavelength
switching sources are perfect for testing large numbers of fibres
quickly and storing results for LAN certification.
Measurement with accuracy of +/– 2.5 metres is achieved by looping
two fibres at one of the links with a patch cord. The unit emits a light
signal down the cable and the time this takes to complete the round
trip through both fibres, is converted to length in kilometres, then
divided by two to show the installed length.
Features
●
Accurately measures length of
single and multimode fibres
●
Extended battery life – up to
15 hours on one 9v battery
●
Easy to read LED display
●
Low battery indicator
AutoTest Kits With Length
Fiber OWL 4B power meters with Wavesource are perfect when
installed fibre length is unknown as this parameter is required to
calculate link budget for LAN fibre certification
Features and specifications of individual units are as before. Kit costs
are lower than the separate purchase cost of the above units.
Description
Fiber OWL4 Manual Multimode Test Kit
with ST Connectivity
Fiber OWL4 Manual Multimode Test Kit
with SC Connectivity
Fiber OWL4 Manual Quad Wavelength Test Kit
with SC Connectivity
Fiber OWL4 Auto Multimode Test Kit
with ST Connectivity
Fiber OWL4 Auto Multimode Test Kit
with SC Connectivity
Fiber OWL4 Auto Quad Wavelength Test Kit
with ST Connectivity
Fiber OWL4 Auto Quad Wavelength Test Kit
with SC Connectivity
Fiber OWL4 Auto Multimode Test Kit
with Length - ST Connectivity
Fiber OWL4 Auto Multimode Test Kit
with Length - SC Connectivity
Fiber OWL4 Auto Quad Wavelength Test Kit
with Length - ST Connectivity
Fiber OWL4 Auto Quad Wavelength Test Kit
with Length - SC Connectivity
Part Number
210-258
Specification
Measurement Range
Up to 25 kilometres
Accuracy
+/– 2.5 metres
Resolution
Up to 1 metre
Description
BOLT Optical Length Tester
Part Number
210-240
210-259
210-260
210-261
210-262
210-263
210-264
210-265
210-266
210-267
210-268
Single Mode ONLY Kits available on request.
H 18
H 19
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
DTX CableAnalyzer™ Series
DTX 10 Gig Solution
Fluke Networks’ DTX CableAnalyzer™ Series combines powerful
speed and unprecedented accuracy no other certification tester can
match. This revolutionary platform significantly reduces total time to
certify to save you time you can see on your bottom line – as much as
33% of certification costs per year. Certify a Cat 6 link three times
faster than other testers with 9-second Cat 6 Autotest and Level IV
Accuracy. DTX also gives you 900 MHz of testing bandwidth, optional
on-board fibre modules, easy-to-understand diagnostics, 12-hour
battery life, a bright colour display, and nearly instant setup and
reporting. DTX - It's all about time!
The DTX 10 Gig over Copper Test Solution enables testing and
certification of twisted pair cabling for 10 Gigabit Ethernet
deployments - whether it is an existing Cat 6 or newly installed
Augmented Cat 6 cabling system.
Features
●
Simplifies complex Alien
Crosstalk link-to-link
certification by using the same
user-friendly and intuitive
DTX interface
●
The only solution to identify
problematic cable(s) within the
same bundle due to link-to-link
crosstalk
Features
●
●
●
●
●
●
Exceeds spec requirements for
Cat 5e/6/7 with superior
Level IV accuracy
Three times faster than existing
testers with 9-second Cat 6
Autotest
Advanced time-saving
diagnostics pinpoints fault and
suggests corrective actions
900 MHz future-proofs your
investment for future
applications such as 10 Gigabit
Ethernet, Class F and CATV
Resident fibre modules lets you
switch between copper and
fibre with the push of a button
Fast, reliable, and rugged with
extended 12-hour battery life
and colour display all enhance
user productivity
●
●
●
●
●
●
All models can be upgraded to
the high-end performance model
DTX significantly reduces total
certification costs by as much
as 33% a year
Optional DTX-10GKIT adds
standards-compliant 10 Gigabit
Ethernet Alien Crosstalk test
capability
Optional DTX-PCU-6S Patch
Cord Test Adapter set allows full
certification of Cat 6 patch cords
Optional DTX-NSM Network
Service Module adds live
network test and report
capability
Optional Gold support for DTX
mainframe and standard
accessories
Description
DTX-1800 CableAnalyzer
DTX-1200 CableAnalyzer
RANGE
EXTENDED
DTX-1800 with Multimode Fibre Modules
●
●
DTX 10 Gig Copper Kit together
with DTX-1800 delivers on the
promise of a future-proof
investment - measuring
performance for 10 Gig and
Alien Crosstalk (ANEXT and
AFEXT) in full compliance
with the industry standards to
500 MHz
NEW
The only solution that is fully
compliant with industry
standards
DTX 10 Gig Kit
Alien Crosstalk Analyzer Kit for DTX-1800 includes: two DTX-AXTLK1
Communication Modules, Windows based DTX AxTalk Analyzer™
Software, two Cat 6A/Class EA Permanent Link Adapters
(DTX-PLA002S), two Channel Adapters optimized for Alien Crosstalk
measurements to 500 MHz (DTX-CHA001AS), two Link Terminators
(DTX-AXTERM) and two RJ45-to-RJ45 Couplers. All items in this kit
are packaged in a separate carrying case.
Description
Part Number
DTX 10 Gig Kit
DTX-10GKIT
Part Number
DTX-1800
DTX-1200
DTX-1800-M
DTX-1800 with Multimode and Singlemode Fibre Modules DTX-1800-MS
DTX-1200 with Multimode Fibre Modules
DTX-1200-M
DTX-1200 with Multimode and Singlemode Fibre Modules DTX-1200-MS
Patch Cord Test Set
DTX Network Service Module
DTX-PCU-6S
DTX-NSM
Gold Support for DTX mainframe and standard accessories GLD-DTX
Replacement Permanent Link Adaptor Set
for DTX CableAnalyzer
DTX-PLA002S
Note: GLD-DTX only covers main test unit. Additional Gold Support for multimode and
singlemode fibre modules is available under separate cover.
H 20
H 21
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
DTX Compact OTDR
DTX Compact OTDR continued
Fluke Networks’ new Compact OTDR module is the latest
enhancement to the DTX CableAnalyzer -a revolutionary test
platform. In addition to performing copper certification and
diagnostics, your team can become fiber test experts when you
decide to grow your business and turn your cable tester into an
OTDR. This full featured, compact OTDR module snaps onto a DTX
CableAnalyzer and provides unmatched ease of use for premises
fiber testing. Choose a kit that includes a DTX mainframe and smart
remote, options for copper certification, optical loss/length capability,
or order a module and software that can be installed on your own
DTX CableAnalyzer.
DTX COMPACT OTDR kit (DTX-OTDR-KIT)
Choose this option if you own a DTX CableAnalyzer with Loss/Length
fiber capability and want to add an OTDR option and accessories.
DTX Fiber Certification Kit (DTX-OTDR/LL-KIT)
Choose this option if you own a DTX CableAnalyzer without fiber
capability. This kit will give you complete fiber certification and
troubleshooting capability.
DTX COMPACT OTDR Module (DTX-OTDR-QMOD)
Choose this option if you already own a DTX mainframe and want to
add OTDR capability and want to purchase launch fibers separately.
Features
Description
NEW
●
Turn your cable tester into
an OTDR. DTX Cable Analyzer
- one revolutionary test
platform for both copper and
fiber testing
●
●
Test and troubleshoot fiber like
an expert with easy to use DTX
Compact OTDR
●
●
Shoot OTDR traces on
singlemode and multimode
links at 850nm, 1300nm,
1310nm, 1550nm.
●
Perform Basic loss/length
certification & Extended (OTDR
trace) certification with one
powerful cable tester
Diagnose hard to find fiber
failures with DTX Compact
OTDR and resolve simple cable
faults, polarity problems with
built-in VFL
Produce professional
certification test reports with
LinkWare Results Management
Software.
Part Number
Complete DTX 1800 Copper/Fiber Certification Kit
DTX COMPACT OTDR Starter Kit
NEW
DTX-1800-MSO
DTX-OTDR-QUAD
DTX COMPACT OTDR kit
DTX-OTDR-KIT
DTX Fiber Certification Kit
DTX-OTDR/LL-KIT
DTX COMPACT OTDR Module
DTX-OTDR-QMOD
Lease Financing Service NOW available.
Call our Sales Office for further details
Kit Descriptions
Complete DTX 1800 Copper/Fiber Certification Kit (DTX-1800-MSO)
Choose this option if you install and maintain premise networks with
both copper and fiber. Includes a mainframe and smart remote along
with the complete package of testing and troubleshooting options.
DTX COMPACT OTDR Starter Kit (DTX-OTDR-QUAD)
Choose this option if you are looking for an OTDR for fiber
troubleshooting and extended certification. Copper and Tier 1 fiber
certification can be added later with addition of a smart remote and
other options and accessories.
H 22
H 23
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
DTX Fiber Modules
DSP-4000 Series Digital CableAnalyzers
Add record-fast fibre certification to your DTX CableAnalyzer – five
times faster than existing testers. DTX delivers the greatest time and
cost-savings. Certify fibre attenuation, length, and polarity quickly and
simply. Autotest automatically loss tests two fibres, each at two
wavelengths, with length measurement and pass/fail analysis – all in
12 seconds. New Series 2 Fibre modules incorporate interchangeable
input connectors, so users can match the connector on the
installation with the connector on the tester, improving accuracy and
repeatability. Standard shipment is SC connectors. Adapters are
available for most commonly used connector types. All DTX Fibre
Module sets ship with new SC-SC Duplex Test Reference Cords,
designed to improve test accuracy and repeatability. These are also
available to different connector types. Please call for availability of
your connector type. Find faults quickly with built-in VFL. Save,
upload and report results using LinkWare PC software. Certify multiple
fibre types with multimode and singlemode modules. SFF connector
support, TALK, FINDFIBER, MONITOR add testing power. DTX tests
more fibre in less time, saving over 100 hours per year.
The DSP-4000/PL Digital CableAnalyzer™, is designed for cable
installers and network owners who need to certify high-speed, copper
and fibre cabling to today’s industry standards. The DSP digital test
technology delivers functionality and accuracy beyond that of analog
testers.
Features
●
●
Add record-fast fibre
certification to the DTX
CableAnalyzer
Five times faster than existing
testers with 12-second Autotest
●
Resident fibre module is
on-board when you need it
●
Locate fibres, verify continuity
and polarity, and find near-end
breaks with built-in VFL
●
●
Speed testing with TALK,
FINDFIBER, MONITOR,
bi-directional and single fibre
test features
Deliver Tier 1 per EIA/TIA
TSB140 certification
Description
Part Number
Set of two DTX Multimode Fibre Modules, each
incorporating:850nm and 1300nm LED sources combined
into a single output port, 850/1300/1310/1550nm power
DTX-MFM2
meter, integrated VFL
Set of two DTX Singlemode Fibre Modules, each
incorporating: 1310nm and 1550nm laser sources
combined into a single output port,
Fluke Networks' DSP-4000 CableAnalyzer provide full certification of
Cat5E and Cat6 copper also Single and Multimode fibre installations
in accordance with existing international standards.
The DSP-4000 provides onboard memory for 500 Cat5E or Cat6
autotests (without graphical data).
Features
●
Exceeds all specification
requirements for Cat 5e and
Cat 6
●
Tests high-performance cable
to 350MHz
●
Performs a Cat 5e or Cat 6
Two-way Autotest in about
30 seconds
Automatically diagnose cabling
faults and displays results
graphically and in text
●
●
Monitors network traffic on
Base-T and 100Base-TX
Ethernet systems
●
Shows detailed plots of NEXT,
ELFEXT, Attenuation, ACR and
Return Loss – up to 350MHz
●
Provides Built-in Talk Mode for
two way voice communication
between the main and remote
units
●
All DSP series testers ship with
Channel Adaptors as standard
●
Optional 16MB and 32MB
memory cards are available as
accessories
●
Level III accuracy
●
Uses Linkware software to
produce standard test reports
Description
Part Number
Cable Analyzer with Smart Remote
DSP-4000/PL
Gold Support for all DSP Series CableAnalyzers
GLD-DSP
Patch Cord Test Adaptor
DSP-PCI-6S
External Battery Charger
BC-7217
DTX-SFM2
850/1300/1310/1550nm power meter, integrated VFL
Set of two DTX Gigabit Multimode Fiber Modules, each
incorporating: 850nm VCSEC source and 1310nm laser
DTX-GFM2
source combined into a single output port with Integrated VFL
DTX Fibre Module Gold Support, Gold SuperVision
ensures peace of mind with free annual calibration
H 24
GLD-DTXFIBERMOD
H 25
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
DSP-LIA102S Permanent Link Adaptor Set
DSP-4000 Series Fibre Test Adaptors
Fluke Networks’ Permanent Link Test Interface Adaptor delivers
accurate test results and standards compliance for field testing of
twisted pair cabling installations.
The DSP-LIA102S incorporates a new improved cable design which
offers much improved service life with increased flexibility and length.
Together with the PM06 Personality Module, the DSP-LIA102S
provides the best connectivity solution for the DSP-4000 Series.
NOTE: Replace DSP-LIA101S with DSP-LIA102S as a set. Do not mix
LIA101 with LIA102.
Features
●
Superior Accuracy resulting in
more first time passes
●
TIA and ISO Standards
compliant
●
Increased time savings
●
Improved ruggedness
●
Automated field calibration to
maximise performance
●
●
Proprietary cable design
effectively eliminates effects of
cable ageing
Different personality modules
are available to test different
connector types
Description
Permanent Link Adaptor Set
(Comes with PM06 as standard)
DSP-LIA102S
Permanent Link Adaptor Calibration Module
DSP-PLCAL
Permanent Link Personality Module
DSP-PM06
Other Permanent Link Personality Modules available on request.
H 26
Part Number
Optional Fibre Test Adaptors extend the test capability of the DSP-4000
Cable Analyzers to provide full performance certification of multimode,
singlemode and Gigabit fibre installations. All DSP-4000 Fibre Test
Adaptors measure fibre power loss and length of two fibres
simultaneously. Power Loss Allowance is calculated in accordance
with a user-selected fibre standard. To cover all fibre certification
requirements, there are 3 different Fibre Test Adaptors: the
DSP-FTA420S for multimode installations, the DSP-FTA430S for more
demanding singlemode links, and the DSP-FTA440S for the compliance
testing of multimode Gigbit installations. Gigabit is unusual in using
both VCSEL and FP laser technology for data transmission: to fully test
for Gigabit compliance, the FTA440S incorporates both a VCSEL and
FP laser.
Features
●
Test 2 fibres at a time
●
●
Simultaneously measures loss
at both wavelengths at both
ends
850nm and 1300nm LED
sources at both ends
(Multimode FTA420S)
●
Optimised for 62.5/125 or
50/125 fibre sizes (Multimode
FTA420S)
●
1310nm and 1500nm FP lasers
at both ends (Singlemode
FTA430S)
●
Optimised for 9 micron fibre
size (Singlemode FTA430S)
●
850nm VCSEL and 1300nm FP
Laser at both ends (Gigabit
FTA440S)
●
Optimised for 50/125 fibre size
(Gigabit FTA440S)
●
Measures length and calculates
Power loss Allowance
●
Completely tests 2 fibre links in
12 seconds
●
DSP-4000 saves power loss,
limit and headroom and length
test results for report generation
●
Choice of over 20 different fibre
standards
●
DSP Talk Mode operates all
Fibre Test Adaptors
●
Gold support available
●
Support for all major multimode
Small Form Factor connectors
(optional adaptor kit)
Description
Part Number
Cable Analyzer Fibre Test Adaptor – Multimode
DSP-FTA420S
Cable Analyzer Fibre Test Adaptor – Singlemode
DSP-FTA430S
Cable Analyzer Fibre Test Adaptor – Gigabit
DSP-FTA440S
Gold Support for DSP Fibre Test Adaptors
GLD-DSP-FTA
H 27
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
CableIQ Qualification Tester
CableIQ Residential Qualifier Kit
CableIQ is the first qualification tool designed for network technicians
who need to troubleshoot connectivity problems and qualify cabling
bandwidth. It gives network techs the vision to see whether an
existing cabling link is qualified to support 10/100, VoIP or Gigabit
Ethernet, quickly isolate cabling from network problems and discover
what is at the far end of any cable. It detects speed and duplex
settings of attached switches and PCs. Intelligent wiremap graphically
shows distance to faults (e.g., pin 1 break at 15m). Lightweight,
rugged, reliable unit tests all copper cabling. Its ease and power can
help you close trouble tickets faster and ensure smooth upgrades to
higher network speeds.
●
●
●
●
Qualifies whether existing
cabling can support voice, VoIP,
10/100/Gigabit Ethernet
●
Troubleshoots existing cabling
plant which can’t support the
desired network bandwidth
●
Discovers what’s at the end of
any cable and configuration
(speed/duplex/pairing)
●
Frees-up switch ports and
identifies unused links
Description
CableIQ Qualification Tester
Features
●
Graphically maps wiring
configuration and shows
distance to faults with Intelligent
Wiremap
Documents that residential
cabling systems are defect-free
and TIA-570B compliant
●
Tests all copper cabling media:
twisted-pair, coax, and audio
cabling
Qualifies residential cabling
systems to support voice, VoIP,
10/100/1000 Ethernet, and
CATV
●
Graphically Maps wiring
systems and shows distance to
faults with built-in TDR
Features
NEW
CableIQ is the first qualification tester designed for residential
installers who need to document that cabling systems are installed
properly and will perform reliably. It quickly qualifies residential
cabling systems to support voice, VoIP, 10/100/1000 Ethernet, and
CATV, and presents results in the form of professional test reports.
Designed especially with the residential installer in mind, CableIQ is
versatile and intuitive enough to replace multiple tools for testing,
ID-tagging, and troubleshooting all voice, data, video, audio, and
security cabling.
Locates and traces cable with
IntelliTone™ digital signaling
technology
Part Number
CIQ-100
●
●
Tests and Troubleshoots all lowvoltage residential wiring:
- Coax Cables
- Telephone Wire
- Security Wire
- Speaker Wire
NEW
Locates and traces cables with
IntelliTone™ digital signaling
technology (Intellitone probe
available separately)
CableIQ Residential Qualifier Kit comprises: CableIQ main unit
(CIQ-100), RJ45 patch cord (2), RJ11 patch cord (2), USB cable, bare
wire adapter, speaker wire adapter, coax cable, coax BNC adapter,
coax RCA adapter, "Qualified" labels (50), CD ROM user manual,
getting started guide, AA batteries (4), soft carrying case
Description
CableIQ Kit Residential Qualifier
Part Number
CIQ-KRQ
CableIQ Kit
The CableIQ Kit enjoys all the capability of the CableIQ base unit, but
includes all the available accessories, extending the standard units’
test utility. Included in CableIQ Kit is: IntelliTone 200 Digital Probe,
Remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB cable, coax "F"
push-on adapter, 75-ohm BNC-BNC coax patch cord, RJ45/11
universal coupler, RJ11-RJ11 patch cord, owners CD and quick start
guide, (4) AA batteries, test accessory soft pouch, hard carry case.
Description
Part Number
CableIQ Kit
CIQ-KIT
NEW
H 28
H 29
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
MicroScanner2 Copper Verification Tester
NetTool Series II
The MicroScanner2 Cable Verifier presents a revolutionary change in
voice, data, and video cable testing. It starts by taking results from
what was four different test modes and displaying them all at
once – graphical wiremap, pair lengths, distance to fault, cable ID,
and far end device. What’s more, its integrated RJ11, RJ45, and coax
test ports support virtually any type of low-voltage cable testing with
no need for awkward adapters. The end result is reduced test time
and technician error. That makes high-quality installations more
efficient than ever.
Troubleshooting network connectivity problems can be a daunting and time-consuming task.
Without the right tool, network techs can spend hours of unnecessary time trying to isolate
the problem.
Features
Since no two networks are identical, Fluke Networks offers several NetTool models to match
individual requirements and to maximize the value of a NetTool investment. From our top-ofthe-line NetTool Series II Pro VoIP to the entry-level NetTool 10/100, you will find a NetTool
that fits your network troubleshooting needs.
●
NEW
Revolutionary Interface –
Graphical wiremap, length,
cable ID, and distance to fault
displayed on one screen
●
●
Multimedia Support – Tests all
common media types including
RJ11, RJ45, Coax, with no need
for adapters
●
●
IntelliTone Toning – Locates
virtually any cable or wire pair
with IntelliTone digital and
analog toning
●
VDV Service Detection – Verifies
today’s media services,
including 10/100/1000 Ethernet,
POTS, and PoE
Description
H 30
Rugged Housing – Integrated
rubber holster enhances grip
and makes it durable enough
for the toughest jobs
Oversized Display – Large,
backlit LCD makes results
crystal clear whether in bright
sunshine or in a dark closet
Fluke Networks has put an end to the guessing game with the NetTool Series II Inline Network
Tester, combining powerful NetProve diagnostics, inline Gigabit vision, digital IntelliTone
technology and network, IP Phone and PC configuration testing in one palm-sized tool, so
you’ll have everything you need to quickly resolve even the toughest connectivity problem.
The right tool for the job
Features
●
NetProve™ diagnostics isolate device and application
connectivity issues in seconds
●
Inline Gigabit vision - quickly
troubleshoot network problems
with powerful inline vision into
10/100/Gig traffic between
switches, PCs, IP phones and
other devices
●
Part Number
MicroScanner2 Cable Verifier
MS2-100
MicroScanner2 Professional Kit
MS2-KIT
VoIP troubleshooting - connect
inline for visibility into VoIP calls
to quickly diagnose IP phone
boot-up and call control
problems and to measure key
call quality metrics
●
PoE Measurements - verify
readiness of PoE systems and
troubleshoot PoE device
problems
●
Spot available network
resources - See MAC and IP
addresses, subnet and services
offered by active servers,
routers and printers
●
IntelliTone digital signaling quickly and safely locate cables
on active network
●
Helps frontline network
technicians quickly verify and
troubleshoot desktop-tonetwork connectivity
●
Resolves complex PC network
configuration issues such as IP
address, default gateway, and
email and web servers. Also
shows key network resources
used by that PC such as
servers, routers and printers
●
Includes a Problem Log that
concisely lists problems
detected on the PC and network
such as addressing issues,
email and web problems
●
Simultaneously monitors
network health (frames sent,
utilisation, broadcasts, errors,
collisions) for full-duplex
connections, with individual
counts for both the desktop
and the network conversations
●
Shows protocol mismatches
between the PC and the
network, and identifies
unwanted protocols that waste
valuable bandwidth
●
Includes cable-testing
capability, eliminating the need
for a separate cable tester
NEW
H 31
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
NetTool Series II continued
IntelliTone™ Pro Testers and Probe
Description
Part Number
NetTool Series II PRO
NTS2-PRO
NetTool Series II VOIP
NTS2-VOIP
AC universal adapter for NT Series II
DTX-ACUN
WireView WireMapper #1 for NT Series II
WireView WireMappers #2-6
WIREVIEW-1
WIREVIEW 2-6
AC adapter and NiMH battery set for NT Series
NTS2-POWERPAK
LinkRunner Pro Network Multimeter
Features
LinkRunner Pro enables technicians to resolve a broader range of
today’s connectivity problems. Unlike traditional 10/100 link testers,
LinkRunner Pro verifies Gigabit link – increasingly important for
today’s high-performance networks. It also pings up to 10 key
devices, detects Power over Ethernet (PoE), resolves 802.1X security
conflicts, verifies cable wiremap, and identifies the nearest switch port
with Cisco, Extreme and IEEE Link Layer Discovery Protocols
(CDP/EDP/LLDP). Built-in IntelliTone digital toning precisely locates
cables at patch panels and switches. Link status reports can be
uploaded from USB port and routed with trouble tickets to expedite
problem resolution.
●
Link at 10/100/Gig – identify
device capabilities and confirm
actual speed/duplex status
●
Test cable wiremap – measure
length; detect miswires, shorts,
split pairs or opens
●
Ping key devices – measure
response of DHCP, router, DNS,
and other devices or URLs
●
Locate and ID cable – use
IntelliTone or optional IDs to
locate cables at patch panels
●
Verify 802.1X settings –
authenticate with EAP type,
user name, certificates, and
password
●
Document results – upload link
status reports with USB port for
faster problem resolution
●
Detect PoE service – verify
voltage level, and pairs to IEEE
802.3af specifications
Identify switch port – supports
Cisco, Extreme, and IEEE Link
Layer Discovery Protocols
LRPRO-KIT- includes
Wireview2-6 wiremap adapters,
Intellitone probe, carry case,
CLIP-SET, and adapters to
standard LRPRO-1000
Part Number
LinkRunner Pro Network Multimeter
LRPRO-1000
Wireview Cable ID Set # 2-6
RJ-45 to Eight Alligator Clip Adapter
H 32
●
Description
LinkRunner Pro Extended Test Kit
●
Validates twisted-pair
installation with visual end-toend cablemap (opens, shorts
and reversed pairs)
●
Identifies, diagnoses and
troubleshoots telecom/datacom
services
Description
Part Number
Intellitone 100 Toner and Probe Kit
MT-8200-50A
Intellitone 200 Toner and Probe Kit
MT-8200-60A
Intellitone 100 Probe only
MT-8200-53A
Intellitone 200 Probe only
MT-8200-63A
FiberInspector™ Mini
Features
●
The IntelliTone™ Pro Toner and Probe Series from Fluke Networks
give you digital signal locating technology that’s as advanced as the
systems you work with. IntelliTone™ is a breakthrough solution – and
the only solution – that locates and isolates the most elusive, hidden
or bundled voice, data and video cables quickly and reliably – even
on active networks. It succeeds where analogue technology fails –
such as locating cable in a bundle due to signal bleed, finding a cable
even when plugged into active network equipment and differentiating
the tone from noise or a false signal. With gains in speed, precision
and productivity that make analogue tools obsolete.
LRPRO-KIT
WIREVIEW 2-6
CLIP-SET
Use FiberInspector™ Mini to examine installed fiber terminations or
ensure terminations are smooth and clean. Avoid the number 1 cause
of fiber link failure: dirty end-faces. The Fluke Networks FiberInspector
works ten times faster than traditional scopes. Simply insert the probe
and inspect installed fiber connectors through the bulkhead adapters
without accessing the backside of the patch panels. Using a video
microscope also completely ensures that no harmful laser light ever
reaches your eyes.
Features
●
200x magnification probe
enables inspection of both
multimode and singlemode
end-faces inside ports and on
patch cords
●
Miniature display boasts an
exceptionally sharp 1.8” screen
●
Troubleshooting is 10 times faster
than with traditional scopes
Description
FiberInspector Mini
●
Grip trigger activation extends
battery life
●
Various probe adapter tips
allow for inspection through
many different connector
port types
NEW
Part Number
FT500
Optional Probe Tip Adaptors - LC, FC and 1.25mm universal NFM110
H 33
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
FTK400 Complete Fiber Verification Kit
FTK150 Basic Fiber Verification Kit
The FTK400 Kit is for contractors and network technicians who install
and maintain premises networks with both multimode and singlemode
optical fiber. Verify optical loss and power levels at 850nm, 1300nm,
1310nm and 1550nm with SimpliFiber Optical Loss Test Set. Inspect
fiber endfaces at 200X power with Fluke Networks' hand held Fiber
Viewer optical microscope, and visually locate cable faults, connector
problems and polarity issues with VisiFault Visual Fault Locator.
Features
●
NEW
Everything required to test
power loss in both single and
multimode fibre installations, in
one case
●
SimpliFiber Power Meter
●
850/1300 (multimode) and
1310 and 1550nm (singlemode)
SimpliFiber light Sources
The FTK150 is a great starter kit for contractors and network
technicians who install and maintain fiber links with multimode optical
fiber. Verify optical loss and power levels at 850nm, 1300nm with
SimpliFiber Optical Loss Test Set. Add singlemode sources,
microscope, and VFL options as needed.
Kit contains
●
SimpliFiber Power Meter
●
850/1300 (multimode)
SimpliFiber light Sources
●
Carrying Case
●
VisiFault Visual Fault Locator
●
FT120 200x magnifying Fiber
Viewer
●
Carrying Case
Description
Linkware results download and
management software,
download cable, and user
manuals
FTK150 Basic Fiber Verification Kit
●
Description
Part Number
FTK400 Complete Fiber Verification Kit
●
Linkware results download and
management software,
download cable, and user
manuals
Part Number
FTK150
NEW
CIQ-FTK Fiber & Copper Technician Kit
FTK400
This option combines our popular CableIQ Advanced IT kit and
FTK300 Multimode Fiber Verification Kit to provide you with all the
tools you need to qualify copper cabling bandwidth, verify fiber topic
loss and power levels and troubleshoot both copper and fiber links.
FTK300 Multimode Fiber Verification Kit
The FTK300 Kit is for installation and maintenance of multimode
premise networks. Verify optical loss and power levels at 850nm amd
1300nm with SimpliFiber Optical Loss Test Set. Inspect fiber endfaces
at 200X power with Fluke Networks' hand held Fiber Viewer optical
microscope, and visually locate cable faults, connector problems and
polarity issues with VisiFault Visual Fault Locator.
Kit contains
●
Complete FTK-300 Kit and complete CIQ-KIT
Description
CIQ-FTK Fiber & Copper Technician Kit
Part Number
CIQ-FTK
Features
NEW
●
Everything required to test
power loss in multimode fibre
installations, in one case
●
SimpliFiber Power Meter
850/1300 (multimode)
SimpliFiber light Sources
●
VisiFault Visual Fault Locator
●
FT120 200x magnifying Fiber
Viewer
●
Carrying Case
●
Linkware results download and
management software,
download cable, and user
manuals
Description
FTK300 Multimode Fiber Verification Kit
H 34
NEW
Part Number
FTK300
H 35
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Fluke SimpliFiber
FiberViewer Microscopes
Affordable and easy-to-use, Fluke Networks' SimpliFiber Solutions
work together to test multimode and single-mode fiber loss.
(Single-mode requires an additional laser source.)
The compact SimpliFiber sources and meter are durable and rugged,
featuring textured, impact-resistant covers and an ergonomic shape
for a comfortable and secure grip. An integrated cover protects the
fiber ports. Long-battery life assures hours of trouble-free operation.
The SimpliFiber sources and meter are engineered to work together.
The automatic wavelength-sensing feature of the meter identifies the
source wavelength and sets itself appropriately. The simplified
multi-wavelength tests prevent costly measurement errors.
SimpliFiber connects easily to the network. The meter's
interchangeable connector adapter (ICA) permits simple network
connection and straightforward reference power measurement.
Interchangeable connector adapters are available in the most popular
connector styles including ST, SC, FC and 1.25 mm universal.
Use FiberViewer microscopes to ensure fibre terminations are smooth
and clean and avoid having dirty end-faces. It is critical that all optical
connections are clean and free of contaminants to ensure application
success. With universal adapters, end-faces can be inspected when
using many different connector types, including LC connectors.
Features
●
Rugged, portable, ergonomic
tool
●
Easy, manual focus of precision
optics
●
Verify multimode and
singlemode fiber optic networks
●
Measure optical power and loss
to ensure optimal network
performance
●
Interchangeable Connector
Adapter makes switching
between fiber connector types
quick and easy
Description
●
Automatic wavelength-sensor
feature prevents costly
measurement errors
●
Saves 100 test results in
memory
●
Easily manage and document
copper and fiber links with new
LinkWare(tm) Software
Part Number
SimpliFiber ST Kit with ICA
8250-02
SimpliFiber SC Kit with ICA
8250-04
Universal adapters allow for
inspection of end-faces on
many different connector types
●
Available in 200x or 400x
magnification
Factory-tested filters to protect
eyes from harmful light exposure
Description
Features
●
●
Part Number
Fiber Viewer 200 x magnification
FT120
Fiber Viewer 400 x magnification
FT140
Fiber Optic Cleaning Kits
Fluke Networks’ Fiber Optic Cleaning Kits have the best tools to
effectively remove the toughest contaminants with ease. Fiber Optic
Cleaning Kit includes cleaning cube with wipes, ten cards with sealed
cleaning zones, solvent pen, 2.5mm port cleaning swabs and 1.25mm
port cleaning swabs in a rugged carrying case. The rugged carrying
case is ideal for carrying and storing the cleaning components. Each
kit contains detailed cleaning instructions as well as permanently
affixed reordering details. An elasticized pouch permits storage of
additional items such as patch cords, adapter, etc.
Features
H 36
●
Contains everything needed to
eliminate the number 1 cause of
fiber link failure: contamination
●
Various swabs are designed
to fit many styles of connector
ports
●
All components enable optimal
wet and dry cleaning sequence
●
Rugged carrying case stores
and transports all cleaning tools
●
Specially-designed fiber solvent
is precisely dispensed from pen
●
Cleaning cards are perfectly
convenient for troubleshooting
Description
Part Number
Fiber Optic Cleaning Kit
NFC-Kit-Case
NEW
H 37
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
Visible Light Sources
Quintest Structured Cabling Tester
Features
●
Pen style visible red laser
source for locating breaks,
discontinuities or tight bends in
singlemode or multimode
optical fibres
●
Can also be used for the
identification of fibres in a patch
panel and or multi-channel
cable assembly. Light beam
can be modulated at 2Hz to aid
identification
●
NEW
The laser light scatters at
breaks or tight bends in fibres
and can be seen as a red glow
through 250µm or 900µm fibre
buffers and most tight jacketed
cables up to 3.2mm
●
Universal connector adaptor
suitable for any fibre terminated
with a 2.5mm ferrule connector
(e.g. ST, SC, FC)
●
A plug-in 1.25mm ferrule
connector adaptor is also
available allowing systems
terminated with connectors
such as LC to be tested
●
635nm class II laser visible up
to 5km using singlemode fibre
●
Powered by 2 AAA alkaline
batteries (included)
●
Includes small plastic case
Description
Pen style laser source with 2.5mm ferrule interface
Part Number
A compact and simple to use structured cabling tester featuring
continuously sequencing LED displays that indicate wiring faults on
both main and remote units. Identifies opens, shorts, split pairs, cross
pairs and pair reversals on UTP and STP structured cabling. The two
halves "snap" together with unique magnetic action providing
protection against damage.
Features
●
Low cost Structured Cabling
“wire-map” tester
●
Identifies common wiring faults
on UTP and STP schemes
●
Tests and verifies 2, 3 & 4 pair
data and voice wiring
●
Units “snap” together with
magnetic clasp for protection
●
Sequencing LED display
indicates faults at both ends
●
Auto power-off and low battery
indication
Description
Part Number
Tester Unit C/W 1 Cable Identifier
CT8
Cable Identifier
CT45
Carry Case
600-291
Visifault
Training Courses
OMNIScanner 2
Omniscanner 2 is no longer in production. However, accessories and
consumables are still available. Please call with your requirements.
Description
Part Number
OMNIfibre MultiMode Kit ST 62.5/125
8223-07
OMNIfibre SingleMode Kit, ST
8223-11
As Europe's largest and leading independent training provider in the
communications sector, CNet's core function is designing and
delivering training programmes, across the entire spectrum of
communication networks. Mayflex offer a whole host of these training
courses which fall under the following headings:
●
Data & LAN Technologies
●
Fibre Technologies
●
IP & Convergence Technologies
●
Security Technologies
●
Project Management Technologies
For more information, or to book a course,
visit www.mayflex.com/training.htm or call the Mayflex Sales Team.
H 38
H 39
Tooling and Testing from Mayflex
Tooling and Testing from Mayflex
KD Optics Talk Sets
Optical Fyberscope
Features - Multimode
●
●
NEW
●
●
Handheld talk set allows voice
communication between
engineers over multimode
optical fibres during installation
and testing
Fibre optic talk sets offer
increased range and reliability
over walkie talkie radios and do
not have the call charges of
mobile phones
●
Dynamic range >25dB or up to
8km
●
ST connector interface
●
Includes volume control and
power on/battery low indicators
●
One PP3 alkaline battery gives
20 hours use
●
The Optical Fyberscope offers precision magnification to easily
inspect both multimode and singlemode fibre optic connectors for
scratches, dirt and other problems associated with poor transmission
performance.
Features
●
200 or 400 x Magnification
●
Battery operated
●
Backlight facility
●
Supplied with universal adaptor
●
Rugged, hand held case for site
use
Supplied as a pair of handheld
sets in a soft carry pouch
Walkie talkie style press to talk,
release to listen operation
Description
Fyberscope x 200 Magnification
200-435
Requires only one optical fibre
for two way half duplex
communication
Fyberscope x 400 Magnification
200-437
Description
Part Number
Part Number
Multimode talk set
TS-M85-30
OVF-1 – ‘Pen-size’ Visual Fault Locator
Features - Singlemode
●
●
●
●
●
Handheld talk set allows voice
communication between
engineers over singlemode
optical fibres during installation
and testing
Fibre optic talk sets offer
increased range and reliability
over walkie talkie radios and do
not have the call charges of
mobile phones
Full duplex operation over one
fibre (both parties can speak at
the same time)
Includes headsets for handsfree
operation
VOX (voice operated) mode
can be used in lossy or high
reflectance links (reception is
blocked when the user speaks)
●
Dynamic range 30dB or up to
100km
●
FC connector interface
●
Includes volume control and
power on/battery low indicators
●
Two AA rechargeable batteries
give 40 hours use
●
Supplied as a pair of handheld
sets with a charger in a soft
carry pouch
Singlemode talk set
The OVF-1 is specially designed for field personnel who need an
efficient and economical tool for fiber tracing, fiber routing and
continuity checking in an optical network during and after installation.
Fiber breaks, microbends, and poor optical splices are clearly visible
as light glows through the fiber buffer or outer jacket.
Fault location behind optical connectors where the use of OTDRs is
limited due to dead zones is now possible with the OVF-1.
Features
●
Rugged metal housing,
pen-size format
●
Usable with single-mode and
multimode fibers
●
Lightweight
●
Range >5 km
●
Universal push-pull interfaces
(UPP) for 2.5 mm and 1.25 mm
●
CW and blink modes
●
Long battery life (>40 hours)
●
Call button alerts the other user
that you wish to speak using a
buzzer and LED
Description
H 40
●
Visible laser light at 635 nm
Description
‘Pen-size’ - Visual Fault Locator
Part Number
TS30
Part Number
E-V-OVF-1
NEW
H 41
Tooling and Testing from Mayflex
MTS-6000 – Compact Optical Test Platform
The MTS-6000 is a compact and lightweight test platform designed for
the installation and maintenance of fiber networks. It provides field
service technicians with the highest levels of performance and
upgradeability on the market today.
NEW
Modular in design, the MTS-6000 offers an extensive portfolio of test
functionality with over forty different fiber modules supporting a wide
range of applications. The versatility of the MTS-6000 allows
technicians to standardize using one type of test equipment and then
introduce new testing capabilities in the field without incurring
additional costs.
Features
●
Compact, lightweight and
highly integrated
●
Built-in optical talkset option for
communicating along the fiber
●
Over 40 application modules
already supported
●
●
Choose from IL/ORL, OTDR,
PMD, CD or WDM plug-in
modules
Data mode on the talkset allows
for the configuration, testing
and results collecting of two
remote units
●
Exceeds Telcordia
specifications for ruggedness,
drop testing and extended
battery life
●
Compatible with plug-in
modules from the MTS-51001
and MTS-8000
●
Comprehensive connection
checker functionality with builtin VFL, power meter, LTS and
video inspection scope options
Description
Compact Optical Test Platform
Part Number
E-O-MTS-6000
Module upgrade available on the 5100 series.
Contact Sales for further details.
H 42
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement