Hoods Air Extraction/Exhaust Systems

Hoods Air Extraction/Exhaust Systems
Registration
Web
Table-of-Contents
Hoods
Introduction
HO
Table of Contents
Extractor Arms....................................711–714
Conventional Fume Hoods................720–724
Provide localized ventilation at the
contaminant source. Extractor arms can
be easily positioned to remove fumes or
air-borne particulates. Often used when the
fume source can not be readily moved to
a conventional hood or when fumes are
innocuous, e.g. bad-smelling without being
chemically dangerous. May vent to outside
or recirculate into the room through a filter.
Ventilation to outside provides the most
rigorous user protection, particularly for
chemically dangerous fumes. Many employ
“by-pass” designs, which enable consistent
airflows in the enclosure for various sash
positions. Low airflow designs provide user
protection while minimizing energy costs.
Small Hoods........................................715–716
Personal Protection and
Materials Protection...........................725–727
These hoods enhance fume removal by
partially surrounding the fume source. Some
models direct forced airflow to afford further
protection. Low-flow ventilation systems
enable delicate operations, e.g. weighing
while maintaining personal protection.
May vent to outside or recirculate into
the room through a filter.
Hybrid models enable handling of sensitive
materials while protecting the user. Airflow
is HEPA filtered entering the cabinet and
again upon exit, or discharged to the
outside. Applications include manipulating
dangerous but sensitive biological materials,
e.g. Class II, Type A2 cabinets.
Materials Protection...........................728–729
Ductless Fume Hoods........................716–719
Protect your handling operation from
airborne contaminants with these
“miniature cleanrooms.”
These enclosures pass contaminated
air through a filter(s) before returning
air to the room. Use for locations where
outside ventilation can not be achieved.
Can eliminate very high percentages of
particulates and biological hazards. Select
airborne chemical levels can be reduced
to safe levels as verified with monitoring
protocols.
Accessories.........................................729–731
A
Air Extraction/Exhaust Systems
B
Ready removal of harmful fumes—
anywhere in the workplace!
A
B
What’s included: Table mount/wall
bracket assembly and hose clamp
with cover. Swivel boom models
extend arm 24" away from wall bracket.
Complete systems with swivel
booms (above) and tablemounted arms (below)
Diameter
Length
21⁄2" dia
33" to 48"
3" dia
33" to 48"
Blowers
Includes 2-ft
swivel boom
No
Yes
No
Yes
33704-75
Specifications & Ordering Information
Power: 115 VAC, 60 Hz, single phase
Catalog
number
KH-33704-75
KH-33704-80*
KH-33704-85*
Material: Polypropylene
Arm
Optional Y-fitting
for two-arm system
What’s included: inlet and outlet collars
and wall bracket.
Specifications & Ordering Information
Catalog
number
KH-33704-65
KH-33704-67
KH-33704-60
KH-33704-62
C
Choose the exhaust blower suited to
your need. Order optional Y-fitting to
adapt two extractor arms to a blower.
Optional silencer for 1/2- and 3/4-hp
blowers reduces noise by 3 to 4 dB(A).
Alternative blowers are available for
excessively corrosive fumes. Contact
Cole-Parmer Applications for blower
selection assistance and guidance
regarding adaptive fittings and hosing
connections.
Extractor Arm with Bracket
Simply pull an extractor arm over
to the source of fumes, odors, or
dust. Airborne contaminants are
pulled away from the operator and
exhausted outside. Extractor arms
flex, expand, and ­contract—holding
their position for optimal ventilation.
Polypropylene (PP) arm construction
provides outstanding resistance to
heat, chemicals, and abrasion. Arms
expand from 33" to 48" in length
and ends flare or contract to focus
­ventilation as needed.
Add these options
Extractor arm with
bracket
Blower
Description
350 watt blower
1⁄2 hp blower
3⁄4 hp blower
Collar diameter
Inlet Outlet
6"
5"
5"
4"
5"
5"
Air
volume
350 cfm
600 cfm
800 cfm
Noise level
(at 10 ft)
65 dB(A)
70 dB(A)
71 dB(A)
*Also available as 3-phase model. Contact our Application Specialists for details.
Price
C Accessories
KH-33704-55 Y-fitting for 21⁄2" dia extractor arm, 5" outlet
KH-33704-57 Y-fitting for 3" dia extractor arm, 5" outlet
KH-33704-87 Silencer for 33704-80 and 33704-85
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Price
711
Registration
HO
Web
Table-of-Contents
Hoods
Personal Protection, Extractor Systems
Mini Fume Extractor
Localized fume removal—mounts to your desk, wall, or ceiling for venting fumes
to the outside
This mini fume extractor has a compact, swing-arm design that makes it ideal for use in
small areas. All parts exposed to the fumes are constructed of durable polypropylene.
Additionally, the fan is covered with a chemical-resistant epoxy coating.
What’s included: an adjustable three-joint arm and a swiveling table-mount bracket, a hood
with a built-in halogen lamp, control box, fan, 12 ft of PVC hose, reducer, two hose clamps,
and required connections. Power cord not included.
Specifications & Ordering Information
Catalog number
KH-09004-10
Arm length
37"
Air velocity
80 cfm
Power
120 VAC, 50/60 Hz
Price
KH-09004-75 Bracket for wall/ceiling mounting. Two brackets are required for
ceiling mounting /ea
09004-10
High-Efficiency Fume Extractor Arms
Up to 650-cfm air capacity for particles, smoke, and dust
Fume extractor arms are perfect for welding booths and
other industrial applications requiring large air capacities.
Arms come in four lengths: 7 ft, 10 ft, 14 ft, and telescopic.
Telescopic arms measure 34" when retracted, 5 ft when fully
extended. Telescopic and 7-ft arms are suitable for small
work areas; 10-ft and 14-ft arms are best for wider work
areas. Specially designed friction joints allow hoods to be
positioned at any point within the work area. Arms are
supported by a 360° swivel elbow for unlimited
maneuverability. Maximum operating temperature is
158°F (70°C). Assembly is required for all models.
The 7-ft, 10-ft, and 14-ft arms include 10" x 12" oval
polycarbonate hood with handle and damper, and
61/4" OD PVC fiberglass-reinforced hose. Telescopic arms
include 14" diameter aluminum hood, and 61/4" OD PVC
fiberglass-reinforced hose.
l Fume extractor arm
l Fan
l Wall mounting bracket
Two on/off switches
control both light
and fan.
Fume extractor arm 33702-12
includes the light package.
Order models with light package for improved work area illumination. Light package
includes halogen lamp, protective grill (33702-10, -12, and -14 only), and hood-mountable
switches for on/off control of lamp and fan. Lamp operates on 115 VAC, 60 Hz.
A 1/2-hp or 1-hp fan and wall mounting bracket are required to complete your
system­­­—order separately below.
Telescopic arm
33702-08
Specifications & Ordering Information
Arm
Catalog
number
Diameter
Length
Fume extractor arm only
KH-33702-00
7 ft
KH-33702-02
10 ft
61⁄4"
KH-33702-04
14 ft
KH-33702-08
Telescopic (34" to 5 ft)
Fume extractor arm with light package
KH-33702-10
7 ft
KH-33702-12
10 ft
61⁄4"
KH-33702-14
14 ft
KH-33702-18
Telescopic (34" to 5 ft)
Maximum air
velocity
Power
VAC
Hz
650 cfm
—
650 cfm
115
Price
60
KH-33702-50 Fan, 1⁄2 hp. Air capacity: 300 to 400 cfm. 115/230 VAC, 60 Hz
KH-33702-60 Fan, 1 hp. Air capacity: 550 to 650 cfm. 115/230 VAC, 60 Hz
KH-33702-90 Wall mounting bracket
Wall mounting
bracket 33702-90
shown with
fan 33702-50
14
SafeAir Gas Monitoring Badges provide an immediate visual indication when a specific
chemical hazard is present. The low-cost, disposable chemical detector badges allow you to
perform daily exposure screening. Detect carbon monoxide, chlorine, formaldehyde, mercury,
and more. Badges require minimal training to use and require no calibration, extra equipment,
or analysis. Badges attach easily to shirts or lab coat collars.
®
712
Exclamation mark warns of the
presence of targeted hazard.
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
HO
Hoods
Personal Protection, Extractor Systems
Air Cleaning Systems
Specifications & Ordering Information
Two self-supporting extractor arms
are ideal for two-station setups
These air cleaning
systems capture and
remove smoke, dust,
mist, and fumes before
they enter the work area,
then recirculate clean air
back into the workplace.
The systems are selfcontained, with two 3" dia
self-supporting extractor
arms made of heat-,
chemical-, and abrasionresistant polypropylene;
end of arms flare up
Benchtop system
to 41/2" dia. Ideal for
33703-00
two-station setups, or use
the included inlet cap for single-arm use.
Choose from benchtop or portable cleaners
with 200 or 350 W blowers, then
complete your system with filters
sold separately at right.
Benchtop Air Cleaning System
is a two-stage filtration
system ideal for most
contaminant problems.
The system includes two
sets of mounting brackets;
mount to your table or
benchtop with the cartridge
filter extending above or
below the surface.
Portable Air Cleaning System can be
used as a two- or three-stage filtration
system. The cleaner is mounted to a
portable cabinet—perfect for general
applications and hard-to-reach areas.
Portable system
33703-10
Arms
Length: 33" to 48"
Flare: 2" to 41/2" dia
Noise level*: 64 dB(A) at 4 ft,
61 dB(A) at 12 ft
Catalog
number
KH-33703-00
KH-33703-25
KH-33703-10
KH-33703-30
Style
Benchtop
Portable
Dimensions
Benchtop: 12"W x 10"H x 6"D
Portable: 201/2"W x 363/4"H x 13"D
Air velocity, ft/min
Single
Two
extractor extractor
arm
arms
2800
1800
3800
2250
2800
1800
3800
2250
Power
Price
VAC
Hz
115
60
115
60
Watts
200
350
200
350
*Ratings are based on a clean standard filter cartridge.
Filter Packages
High-Efficiency Filters capture smoke and dust—ideal if you mix dry
chemicals, sand, grind, or do light welding or soldering. Prefilter is
30 to 35% efficient†, high-efficiency cartridge is 96.5% efficient‡.
HEPA Filters capture soldering fumes and vapors that contain lead.
Prefilter is 30 to 35% efficient†; HEPA filter is 99.97% efficient**.
Final Adsorption Carbon Module captures volatile solvents, touchup paint fumes, and other noxious odors. Available in combination
with primary high-efficiency or HEPA filters (33703-02 and -04), or
use as a final stage filter for portable air cleaning system 33703-10.
Catalog number
Primary filter packages
KH-33703-01
KH-33703-02
KH-33703-03
KH-33703-04
KH-33703-05††
Replacement filters
KH-33703-06
KH-33703-07
KH-33703-08
KH-33703-09
KH-33703-12
Description
Price
High-efficiency filter with prefilter
High-efficiency filter with carbon module
HEPA filter with prefilter
HEPA filter with carbon module
Final adsorption carbon module
High-efficiency filter with prefilter
Activated carbon refill for 33703-04, -05
Activated carbon refill for 33703-02
HEPA filter
Prefilters for HEPA filter, pack of six
Efficiency according to ASHRAE 52 test method ‡Efficiency using SAE fine test dust
†
**Efficiency using 0.3 µm D.O.P. test
††
or use with model 33703-10 portable system only.
F
Extractor Systems Kits 2000 and 3000
Draw away fumes at their source
Easy adjustment of extractor arm position
Systems filter air to remove particulates and reduce organics
Use these adaptable extractor systems to prevent user exposure
to fumes and airborne particulates. Extractor arms move flexibly
but position firmly for maximum fume removal without impeding
user operations. The system fan draws fumes through filter
containing activated charcoal before returning air to the room.
Control airflow velocity up to 88 cfm using a remote control
positioned close to the user. Use in applications including gluing,
soldering, and removal of select solvents.
l
l
Extractor Kit 2000 has a three-foot polypropylene (PP) extractor
arm ending in a small hood.
What’s included: table bracket and 99.97% efficient filter
containing four pounds of activated charcoal media for
absorption of airborne organics (e.g. solvents).
Extractor Kit 3000 has a four-foot anodized aluminum extractor
arm (3" diameter) with polypropylene joints.
What’s included: bench bracket and 99.97% efficient filter
containing four pounds of activated charcoal media for absorption
of airborne organics (e.g. solvents).
Extraction kit 2000 model 33702-20
Specifications & Ordering Information
Catalog
number
KH-33702-20
KH-33702-30
System
Extractor kit 2000
Extractor kit 3000
VAC
Power
Hz
120
60
Watts
170
KH-33702-25 Replacement filters, for both kits
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Price
713
Registration
HO
Web
Table-of-Contents
Hoods
Personal Protection, Extractor Systems
Fume Adsorbers
Trap harmful xylene and toluene fumes
Fume adsorbers are designed for light-duty applications involving organic solvents,
formaldehyde, ammonia, or low molecular weight amines. Fume adsorbers use carbon
filtration to trap vapors so that safe, filtered air is returned to the laboratory. No outside
ducting is required. These portable, low-profile enclosures fit easily on countertops with
overhanging cabinets and are available in two widths.
Each fume adsorber includes a carbon filter that adsorbs vapors from organic solvents,
formaldehyde, or ammonia. Features include built-in motorized impeller to provide face velocity
up to 35 fpm. Adsorber has a white, dry powder epoxy-coated steel housing with perforated
baffle for uniform airflow. Canopy is a clear, one-piece 3⁄8"-thick, shatter-resistant acrylic. Quiet
operation is 58 to 63 dBA. A prewired rear-mounted auxiliary electrical receptacle has a topmounted blower switch with circuit breaker. Work surface and base cabinet must be ordered
separately. Order base cabinets on page 731. Replacement filters are sold separately below.
What’s included: carbon filter (two for double-filter models), power switch, and 8-ft cord.
The 115 VAC models have a three-prong plug.
Specifications & Ordering Information
Catalog
Vapor
number
Single-filter fume adsorbers
KH-09003-30
Organic
KH-09003-35
KH-09003-55
Formaldehyde
KH-09003-65
KH-09003-60
Ammonia
KH-09003-70
Double-filter fume adsorbers
KH-09003-40
Organic
KH-09003-45
KH-09003-75
Formaldehyde
KH-09003-85
KH-09003-80
Ammonia
KH-09003-90
Overall dimensions
(L x W x H)
231⁄2"
x 30" x
151⁄2"
231⁄2" x 60" x 151⁄2"
Power
VAC
Hz
115
230
115
230
115
230
60
50
60
50
60
50
115
230
115
230
115
230
60
50
60
50
60
50
Shpg wt
lb (kg)
Replacement filter
Catalog no.
Price
Price
67 (30)
KH-09003-50
69 (31)
KH-09003-52
71 (32)
KH-09003-54
135 (61)
KH-09003-50
137 (62)
KH-09003-52
139 (63)
KH-09003-54
Air filter system
33703-40
with optional
acrylic hood
33703-52
Ductless Air Filter System
Excellent versatility—two systems in one!
Place this compact system to remove particles and
volatile contaminants at their source. System can
operate as a stand-alone hood or can filter air
through twin self-supporting extraction arms for
flexible fume removal. Extractor arms are made of
durable polypropylene—they resist heat, chemicals,
and abrasions. Order optional dolly for mobile
filter unit operation or acrylic hood accessory
for hood operation. Complete your system
with filters sold at right.
Fume adsorber 09003-30
Jointed arms flex
and expand for
two-workstation
ventilation.
Activated Carbon Filter captures volatile
solvents, touch-up paint fumes, and other
noxious odors. The primary refillable carbon
module is 6" thick and comes with a final
filter. Filter is 40 to 50% efficient.
Specifications & Ordering Information
Catalog
number
Color
Dia.
Arm
Length
Exhausts to: inside
Noise level*: 50 to 62 dB at 12 ft,
61 to 64 dB at 4 ft
KH-33703-37
White
KH-33703-38
2" to
33⁄4"
KH-33703-39
Grey
KH-33703-40
36" to
53"
Air volume
(fan performance)
350 cfm at 0.5",
240 cfm at 2", 100 cfm at 2.75"
250 cfm at 0.5",
180 cfm at 1.5", 75 cfm at 1.9"
350 cfm at 0.5",
240 cfm at 2", 100 cfm at 2.75"
250 cfm at 0.5",
180 cfm at 1.5", 75 cfm at 1.9"
33703-40
Power
Shpg wt
Watts Phase lb (kg)
VAC
Hz
120
60
350
Single
1120.00
120
60
200
Single
1030.00
120
60
350
Single
1120.00
120
60
200
Single
1030.00
*Actual measurements are dependent upon inlet/filter combinations.
KH-33703-50 Dolly with casters
KH-33703-52 Acrylic hood, 6" deep
714
High-Efficiency Filters capture smoke and
dust—ideal if you mix dry chemicals, sand,
grind, or do light welding. If you use
solvents or paint in the same process,
choose a combination high-efficiency filter
with refillable 2"-thick carbon module. Filter
is 95% efficient.
HEPA Filters capture soldering fumes and
vapors that contain lead. If you use solvents
or paint in the same process, choose a
combination HEPA filter with refillable
2"-thick carbon module. Filter is 99.97%
efficient.
What’s included: one 2-ply polyester ring-panel prefilter, one filter holddown grid, one inlet grate, one inlet cover for two extractor arms, two
extractor arms, two arm-hood attachments, and one arm-hole cap.
Cabinet dimensions
Horizontal position: 121/2"W x 121/2"H x 191/2"D
Vertical position: 121/2"W x 191/2"H x 121/2"D
Filter Packages
KH-33703-54 Adjustable acrylic hood
with limit covers
Price
Cat. no.
Description
Primary filter packages
KH-33703-41
High-efficiency filter
High-efficiency filter
KH-33703-42
with carbon module
KH-33703-43
HEPA filter
HEPA filter
KH-33703-44
with carbon module
KH-33703-45 Carbon module with final filter
Replacement filters
KH-33703-46
Prefilters, pack of four
Activated carbon refill
KH-33703-47
for 33703-45
Activated carbon refill
KH-33703-48
for 33703-42, -44
KH-33703-49
Final filters, pack of 4
Price
/ea
/ea
/ea
/ea
/ea
/pk
/ea
/ea
/pk
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Personal Protection, Small Hoods
HO
Protector® Demonstration Hoods
Permits close observation of procedures during educational demonstrations
Deep 23" interior easily accommodates a variety of apparatus
Sturdy work cart lets you easily transport hood from classroom to classroom
Patented Clean-Sweep™ air foil allows air to sweep the work surface for maximum
containment. Airflow openings pull inflow air from under the air foil so that clean air continually
flows through the air foil creating a constant barrier of protection from contaminants. Upper
containment sash foil bleeds air into the enclosure to direct concentrations of contaminants
away from the operator’s breathing zone. Upper dilution air supply introduces room air at the
top of the sash to dilute concentrations in the upper chamber and bathes the back of the sash
with clean air. Clear rear baffle directs air streams to the back of the interior for removal through
the exhaust connection.
l
l
Tempered safety glass front sash, sides, rear baffle, and top offer excellent 360° visibility,
ambient light and protection. Glass provides better fire, scratch and corrosion resistance than
acrylic. The 8"H sash opening limits exhaust demand, conserves costly tempered room air,
and requires a smaller remote blower than most fume hoods. The 2" x 10" rectangular exhaust
collars on the top and bottom allow the hood to be connected to ductwork for exhausting to
the outside or to a FilterMate™ portable exhauster (included) for filtered removal of fumes
and/or particulates. Using the bottom exhaust collar keeps ductwork hidden, maximizing room
visibility. Model 09099-58 is a hood only and
requires connection to a remote blower, hose Specifications & Ordering Information
exhaust, or FilterMate portable exhauster. See
Catalog
Exhaust
Enclosure
Sash
Dimensions
page 729–731 for all accessories.
What’s included: Models 09099-46, -48, -50,
-56 have mobile steel work cart with four
casters; FilterMate portable exhauster with
two filters, hose, and adapter to connect to
hood; and a three-wire power cord with plug.
number
volume (fpm)
KH-09099-58
KH-09099-46
185
KH-09099-50
KH-09099-48
230
KH-09099-56
height
opening
22 3/4"
8"
32"
10"
(L x W x H)
36" x 29" x 22 3⁄4"
39" x 32" x 58"
39" x 32" x 68"
09099-48
VAC
—
115
230
115
230
Power
Hz
—
60
50/60
60
50/60
Amps
—
10
5
10
5
Shpg wt
lb (kg)
75 (34)
Price
125 (57)
135 (61)
Benchtop Fume Hoods
Space-saving design for
light-duty use
Fume and
Particulate
Removal
Workstations
Workstation 33705-10 shown
with stereo microscope
48403-00 (not included).
Five filter options let you customize for your application
Protect yourself from harmful fumes and particulates with these
portable ductless workstations. Workstations accommodate five
different filters in any combination up to a 7" thickness. For
particulate removal, order a prefilter for 60% efficient removal of
particulates down to 5 µm and a HEPA filter for 99.99% efficiency
down to 0.3 µm.
Select a fume filter for your specific application: charcoal filter
(for odor removal), formaldehyde filter, or ammonia gas filter
from table at right. Workstations provide a face velocity up to
100 ft/minute, adjustable via front control knob.
All models feature an acrylic hinged front panel; models 33705-10
and -15 have a 7" x 7" cutout in the acrylic panel for a microscope.
Workstations measure 401/2"W x 22"H x 19"D overall; work area
measures 25"W x 153/4"H x 16"D.
What’s included: workstation lamp with separate on/off switch
and 4-ft power cord with three-prong plug.
Specifications & Ordering Information
Catalog
number
KH-33705-00
KH-33705-05
KH-33705-10
KH-33705-15
Power
Model
VAC
110
220
110
220
Standard
Standard with
microscope cutout
Hz
60
50
60
50
Shpg wt
lb (kg)
75 (34.1)
75 (34.1)
Price
Benchtop fume hoods are designed to
collect and exhaust low-level corrosive
vapors, heat, steam, fumes, and odors.
Interior fiberglass material provides
good chemical resistance. Recessed
resin work surfaces contain spills.
Ductless fume hood 33730-10
What’s included: flexible ductwork
(3" dia x 12 ft L) and a light. The ductless model features a carbon
filter for your small-scale routine operations. Both models come
with an exhaust blower (121 cfm at 0.4" static pressure) and an
8-ft cord with plug. Order replacement carbon filter for ductless
fume hood below table.
Specifications & Ordering Information
Catalog
number
KH-33730-00
KH-33730-05
KH-33730-10
KH-33730-15
Description
Dimensions
(W x H x D)
Ducted
24" x 24" x 15"
Ductless
24" x 24" x 15"
Power
VAC
Hz
115
60
220
50
115
60
220
50
Shpg wt
lb (kg)
45 (20.5)
57 (25.9)
KH-33730-50 Replacement carbon filter for ductless benchtop
fume hood models 33730-10 and -15. Pack of 2
Accessories for Fume and Particulate Removal Workstations
Catalog
number
Filters
KH-33705-60
KH-33705-70
KH-33705-80
KH-33705-90
KH-33705-50
Description
Thickness
Shpg wt
lb (kg)
Charcoal filters
Formaldehyde filters
Ammonia gas filters
Prefilters
HEPA filter
1.5"
1.5"
1.5"
1.0"
4.0"
13 (5.9)
13 (5.9)
16 (7.3)
6 (2.8)
5 (2.3)
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Price
Price
715
Registration
HO
Web
Table-of-Contents
Hoods
Personal Protection, Ductless
Acrylic Balance Enclosure
Protects you from dust, particulates, and organic vapor
This enclosure is ideal for weighing, measuring,
pouring, or mixing samples that may produce
hazardous fumes or airborne solids. Variable speed
blower allows continuous adjustment of airflow and
face velocity.
Front hinged panel is constructed of clear
polycarbonate and allows easy access to work area.
Aluminum framing with clear acrylic sides, back, and
top allow for full light penetration. Order the optional
fluorescent light kit if additional lighting is needed.
Optional audible alarms notify you in the event of an
airflow failure or a blocked filter.
Supplied HEPA filter removes particles down to 0.3
microns at 99.99% efficiency. When working with large
particulate samples, purchase a prefilter (at right) to
prevent premature clogging of the HEPA filter. Optional
carbon filters are available for the adsorption of specific
vapors; order separately at right.
44011-00
What’s included: 6-ft power cord with three-prong plug.
Specifications & Ordering Information
Rated fan performance: 530 cfm
Noise level: 68 dB at 3 ft
Catalog number
KH-44011-00
KH-44011-05
Cabinet dimensions: 30"W x 341/2"H x 22"D
Work area: 28"W x 19"H x 21"D
Description
Power
115 VAC
230 VAC
Acrylic balance enclosure
Shpg wt
Price
80 lb (36.3 kg)
813–866
See the “Life Science” section on pages 813–
866 for our full line of immunology, molecular
biology, and tissue culture products.
Accessories
Catalog
number
KH-44011-60
KH-44011-62
KH-44011-64
KH-44011-66
KH-44011-68
KH-44011-70
KH-44011-72
KH-44011-74
KH-44011-76
KH-44011-78
Filter description
Activated carbon filter,
2" deep
Activated carbon filter,
0.5" deep
Replacement HEPA filter
Dacron® prefilter
Aluminum mesh prefilter
Acid gas filter
Ammonia gas filter
Formaldehyde filter
Mercury filter
Radioactive iodine filter
Qty/
bx
Price/
bx
3
5
1
5
3
3
KH-44011-50 Alarm, airflow
KH-44011-52 Alarm, blocked filter
KH-44011-56 Fluorescent light kit. Includes
white acrylic housing, fluorescent bulb, and
electrical wiring connections
Purifier® Class I Biosafety and HEPA-Filtered Enclosures
Protect you from biological hazards requiring Biosafety Level 1, 2, and 3 containment
EPA filter removes 99.99% of particulates down to 0.3 µm
Purifier enclosures protect you and your laboratory environment—they offer an
economical alternative to Class II laminar flow cabinets when your applications do not
require product protection. The filter indicator monitors the differential pressure across
the filter and lets you know when to change the filter. Side panels and pivoting, angled
sash are made of tempered safety glass; sash pivots upward 20" for easy cabinet loading.
All units are shipped fully assembled. Order a spill-containing work surface and other
accessories at right.
l
Class I Enclosures protect the user from agents that require Biosafety Level 1, 2, or 3
containment but no product protection. These enclosures include an ultraviolet light that
may be used in conjunction with surface disinfection to ensure thorough decontamination.
HEPA-Filtered Enclosures feature fluorescent lamp but do not include a UV light. They
protect the user from hazardous chemical powders, dust, and allergens in diverse
applications ranging from screening suspicious mail to weighing drug ingredients.
33507-00
Specifications & Ordering Information
Catalog
Exhaust
number
volume (cfm)
Class I enclosures
KH-33507-00
110 to 155
KH-33507-02
KH-33507-04
165 to 230
KH-33507-06
KH-33507-08
220 to 310
KH-33507-10
HEPA-filtered enclosures
KH-33507-12
110 to 155
KH-33507-14
KH-33507-16
165 to 230
KH-33507-18
KH-33507-20
220 to 310
KH-33507-22
716
Dimensions
(W x H x D)
233⁄4" x 37" x 283⁄4"
353⁄4"
473⁄4"
x 37" x
283⁄4"
x 37" x
283⁄4"
233⁄4" x 37" x 283⁄4"
353⁄4" x 37" x 283⁄4"
473⁄4" x 37" x 283⁄4"
VAC
Power
Hz
Amps
115
230
115
230
115
230
60
50
60
50
60
50
15
10
15
10
15
10
115
230
115
230
115
230
60
50
60
50
60
50
15
10
15
10
15
10
Shpg wt
lb (kg)
125 (56.7)
165 (74.9)
195 (88.5)
125 (56.7)
165 (74.9)
Price
KH-33505-50 Work surface, 24"W
KH-33505-52 Work surface, 36"W
KH-33506-50 Replacement HEPA filter,
24"W
KH-33506-52 Replacement HEPA filter,
36"W
KH-33506-60 Exhaust connection kit,
24"W
KH-33506-62 Exhaust connection kit,
36"W
KH-33506-70 Remote blower kit;
115 VAC, 60 Hz
KH-33506-72 Remote blower kit;
230 VAC, 50 Hz
195 (88.5)
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Personal Protection, Ductless
HO
Downflow Ductless Workstation
Unique downflow design draws fumes, odors, and particulates
away from the operator’s breathing zone
The airflow
of downflow
workstation
33714-00
This workstation protects you from potentially hazardous fumes,
vapors, and particulates when working with heavy solvents
or powders. The powerful low-speed fan constantly draws air down
past your sample, through a perforated stainless steel work surface
and up through the rear plenum to a series of filters. Work area
is illuminated by integral fluorescent light. Visual alarms indicate
when filters approach saturation and need replacement. Removable
stainless steel tray allows for easy cleaning.
What’s included: one prefilter; order other filters specific to your
application at right.
Workstation Filters
Catalog
number
KH-33714-00
KH-33714-05
Dimensions
Work surface
Overall
25"W x 19"H
28"W x 32"H x 24"D
Power
Shpg wt
lb (kg)
115 VAC
220 VAC
120 (54)
Description
Hydrocarbon
Formaldehyde
Ammonia
Sulfur
Mineral acids
HEPA
Catalog number
KH-33714-50
KH-33714-52
KH-33714-54
KH-33714-56
KH-33714-58
KH-33714-64
Specifications & Ordering Information
Price
Price/ea
24 lb (11 kg)
24 lb (11 kg)
KH-33714-66 Replacement prefilters. Pack of 10
XPert Balance Enclosures
and XVS Ventilation Stations
™
09101-00
Low air-flow technology for motion-sensitive operations
These sophisticated balance
Upper dilution air
enclosures combine air-flow
supply uses fresh air
components to produce a safe
to sweep back of sash.
working environment without
compromising the integrity of
Patented rear
your manipulations. Volatile
baffle with zones of
substances are handled
perforations
promotes horizontal
without airborne exposure
laminar airflow to
to powders, sublimates,
maximize containment
and fumes. Cabinet design
also minimizes electrostatic
Sash manifold directs
air streams away from
effects and vibration to enable
the user.
precise weighing results
while eliminating the need for
Side air foils have
repeated enclosure clean ups.
openings to air-sweep
Exhaust air to outside or return glass without turbulence
air to room through FilterMate
Clean-Sweep™ airfoil
Portable Exhauster.
Shpg wt
Superior Air-Flow Components
has openings for
Durable enclosures are
included fresh airflow
which maximizes
constructed of epoxy-coated
containment
steel and aluminum for
maximum resistance to
corrosion and abrasion. Tempered safety glass sides, top, and
front sash offer excellent visibility, ambient light, and protection.
Glass is preferred over acrylic for optical clarity and resistance to
solvent-induced hazing and marring. On 22"H models, ergonomic
20° angled sash operates glare-free with an 8" opening and
pivots up to lock in position for 20" clearance loading. Design and
construction create unified resistance to vibration, electrostatic
charges, and fire. Two utility ports for cords, cables, and tubing.
Select 22" or 311/4" interior enclosure height. All models require a
remote blower or FilterMate Portable Exhauster, a work surface,
and a supporting base. See Accessories on pages 729–731.
XPert™ Balance Enclosures provide a safe, stable environment
for weighing and other sensitive manipulations. An integrated
monitoring and alarm system provides total assurance that air
is actually flowing at user-designated minimum velocity. Choose
from Guardian Jr. model (alarm capability only) or Guardian 1000
(continuous digital flow rate readout with alarm). Monitors are
mounted at the back of the enclosure. XVS Ventilation Stations
provide the same operating environment as XPert Balance
Enclosures. Recommended for applications where airflow velocity
is assured, e.g. with a nearby dedicated FilterMate unit or for noncritical outside exhaust applications. All models are shipped fully
assembled. Cord and plug are not included.
09100-40
Specifications & Ordering Information
Type
Monitor
Dimensions (W x H x D)
Interior
Overall
Xpert Balance Enclosures
Guardian Jr.
2 ft
223⁄4" x 22" x 23" 24" x 283⁄4" x 287⁄8"
Guardian 1000
Guardian Jr.
3 ft
343⁄4" x 22" x 23" 36" x 283⁄4" x 287⁄8"
Guardian 1000
Guardian Jr.
4 ft
463⁄4" x 22" x 23" 48" x 283⁄4" x 287⁄8"
Guardian 1000
Dimensions (W x H x D)
Interior
Overall
XVS Ventilation Stations
223⁄4" x 22" x 23"
24" x 223⁄4" x 287⁄8"
2 ft
223⁄4" x 311⁄4" x 23"
24" x 32" x 287⁄8"
343⁄4" x 22" x 23"
36" x 223⁄4" x 287⁄8"
3 ft
343⁄4" x 311⁄4" x 23"
36" x 32" x 287⁄8"
463⁄4" x 22" x 23"
48" x 223⁄4" x 287⁄8"
4 ft
463⁄4" x 311⁄4" x 23"
48" x 32" x 287⁄8"
Type
Catalog number
115 VAC
230 VAC
KH-09101-00
KH-09101-02
KH-09101-10
KH-09101-11
KH-09101-20
KH-09101-22
KH-09101-05
KH-09101-07
KH-09101-16
KH-09101-17
KH-09101-25
KH-09101-27
Catalog
number
Price
KH-09100-30
KH-09100-32
KH-09100-40
KH-09100-42
KH-09100-50
KH-09100-52
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Price
717
Registration
HO
Web
Table-of-Contents
Hoods
Personal Protection, Ductless
Portable Ductless Fume Hoods
Excellent for filter removal of organic vapors, acid vapors, and particles
Top of hood opens for easy
filter changes.
ompletely portable—relocate and reinstall in minutes
C
l Meets filtration standard NF X 15-211 Class II—independently
tested and verified
These ductless hoods are self-contained and completely mobile. Ductless
hoods efficiently recirculate highly purified air and release no hazardous
or toxic vapors to the outside. Since they do recirculate room air, you
experience considerable savings in energy costs as no cooled or heated air
is lost to the outside environment. Ductless hoods also feature an air velocity
meter allowing you to verify the face velocity of the moving air at a glance.
l
An hour counter/timer guards user safety and ensures operational
efficiency. Every 60 hours of operation the timer reminds you to check the
filters—helps keep an accurate and useful log of hood use and filter life.
A sampling port for testing the exhausted air makes filter saturation tests
quick and convenient.
Hoods are available in two sizes. The 33664-series hoods measure 311/2"W
x 281/2"H x 221/4"D, the 33665-series hoods measure 311/2"W x 38"H x
249/16"D. Both sizes are available with four filter options; filters capture
either organic or acid vapors, and come with or without a particle filter.
Available options include a fluorescent lighting fixture, a filter saturation
detector, and tempered glass work surface/spill trays (order under
“Accessories” below right). Note: Saturation detector is factory installed—
you must order at the same time you order the hood.
What’s included: an 8-ft cord with a three-prong plug (European plug on
230 VAC models).
Benefits of a ductless fume hood...
l No ductwork necessary—locate your hood anywhere;
ideal where installing ductwork is an expensive option.
l Mobility—use hoods in multiple locations; hoods can sit
on a portable cart or a stationary bench.
l
Energy savings—filtered air is returned to the room;
room temperature is not compromised or disposed.
33664-series measures 311/2"W x 281/2"H x 221/4"D
Specifications & Ordering Information
Power
Catalog
Average
Height
number
face velocity
VAC
Hz
Ductless fume hoods with organic vapor filter
KH-33664-00
115
60
281⁄2 "
107 ft/min
KH-33664-05
230
50
KH-33665-00
115
60
38"
107 ft/min
KH-33665-05
230
50
Ductless fume hoods with organic vapor/particle filter
KH-33664-10
115
60
281⁄2"
103.5 ft/min
KH-33664-15
230
50
KH-33665-10
115
60
38"
104.3 ft/min
KH-33665-15
230
50
Ductless fume hoods with acid vapor filter
KH-33664-20
115
60
281⁄2"
107 ft/min
KH-33664-25
230
50
KH-33665-20
115
60
38"
107 ft/min
KH-33665-25
230
50
Ductless fume hoods with acid vapor/particle filter
KH-33664-30
115
60
281⁄2"
103.5 ft/min
KH-33664-35
230
50
KH-33665-30
115
60
38"
104.3 ft/min
KH-33665-35
230
50
Shpg wt
lb (kg)
Price
124 (56.3)
116 (52.7)
101 (45.9)
116 (52.7)
101 (45.9)
116 (52.7)
101 (45.9)
116 (52.7)
Accessories
KH-33665-60 Optional lighting fixture, 11-watt fluorescent.
Attaches to either side of the fume hood
KH-33665-90 Optional filter saturation alarm. Factory
installed, must be ordered with hood
KH-33664-95 Optional tempered glass work surface/
spill tray for 33664-series fume hoods
KH-33665-95 Optional tempered glass work surface/
spill tray for 33665-series fume hoods
Replacement Filters
Catalog number
KH-33665-80
KH-33665-86
KH-33665-82
KH-33665-88
Filter type
Organic vapor
Organic vapor/particulate
Acid vapor
Acid vapor/particulate
Price
8–32
33665-series measures 311/2"W x 38"H x 249/16"D
718
To monitor filter use order a toxic gas detector in our
“Air/Gas Analysis” section on pages 8–32.
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Personal Protection, Ductless
Self-Monitoring Ductless Fume Hoods
Airflow display lets you know at a glance that you’re working
in a clean-air environment
udible and visible alarms signal when to replace the filters
A
Exceeds OSHA and ANSI standard Z9.5
Get full protection from hazardous fumes, vapors, odors, particles,
and contaminants with these self-monitoring ductless fume
hoods. The advanced monitoring and filter system act with
synergy to ensure a safe working environment. This advanced
monitoring system continuously senses both hydrocarbon output
and air velocity levels. The LED screen displays airflow, filter
type and application, and filter saturation level and lets you know
immediately if you are working in safe conditions. Audible and
visible alarms alert you to reduced airflow, filter condition, blower
failure, and maximum time allowance.
l
The bar graph indicates
the filtration level and
alerts you to replace the
filter before it reaches
saturation.
HO
Digital display of
airflow lets you know
“at-a-glance” if you
are working in safe
conditions.
l
The filter system incorporates a prefilter, a primary filter, and a
secondary “safety” filter to provide added protection. The prefilter
protects the primary and secondary filters from dust particles,
smoke, acid mists, and other submicron particles. Choose from
four filter types in the tables below. The activated hydrocarbon
filter provides a high degree of absorbency—ideal for organic
vapors, odors and fumes, including alcohols, acetone, xylene, and
methylene chloride. Choose the mineral acid filter for hydrochloric
and nitric acids and the formaldehyde filter for formaldehyde and
glutaraldehyde. The HEPA filter has an efficiency rating of 99.997%
for collecting particles down to 0.3 microns—use for containment
of particles such as toxic powders, asbestos, and lead.
What’s included: a prefilter, two 17-watt fluorescent lights,
and a deep chemical-resistant fiberglass spill tray.
Hoods measure 48"H x 28"D.
Specifications & Ordering Information
Catalog
number
KH-33713-00
KH-33713-05
KH-33713-10
KH-33713-15
KH-33713-20
KH-33713-25
Hood
size
Face
velocity
30-inch
125 ft/min
42-inch
125 ft/min
54-inch
125 ft/min
Power
VAC
Hz
115
60
220
50
115
60
220
50
115
60
220
50
Shpg wt
lb (kg)
Price
200 (90.7)
33713-20
220 (99.8)
250 (113)
KH-33710-90 Replacement 30- and 42-inch fume hood
prefilter. Pack of 6
KH-33710-92 Replacement 54-inch fume hood prefilter.
Pack of 6
l Fume hood
l Primary filters
l Secondary filters
Filters for 30-Inch Fume Hoods
Filter type
Hydrocarbon
Mineral acid
Formaldehyde
HEPA
Primary filters (one required)
Cat. no.
Price/ea
Shpg wt
KH-33713-50
23 lb (10.5 kg)
KH-33713-60
30 lb (13.7 kg)
KH-33713-70
30 lb (13.7 kg)
KH-33713-80
15 lb (6.9 kg)
Secondary “safety” filters (one required)
Cat. no.
Price/ea
Shpg wt
KH-33713-55
9 lb (4.1 kg)
KH-33713-65
15 lb (6.9 kg)
KH-33713-75
15 lb (6.9 kg)
KH-33713-85
15 lb (6.9 kg)
Filters for 42-Inch Fume Hoods
Filter type
Hydrocarbon
Mineral acid
Formaldehyde
HEPA
Primary filters (two required)
Cat. no.
Price/ea
Shpg wt
KH-33713-50
23 lb (10.5 kg)
KH-33713-60
30 lb (13.7 kg)
KH-33713-70
30 lb (13.7 kg)
KH-33713-80
15 lb (6.9 kg)
Secondary “safety” filters (two required)
Cat. no.
Price/ea
Shpg wt
KH-33713-55
9 lb (4.1 kg)
KH-33713-66
15 lb (6.9 kg)
KH-33713-76
15 lb (6.9 kg)
KH-33713-86*
15 lb (6.9 kg)
Filters for 54-Inch Fume Hoods
Filter type
Hydrocarbon
Mineral acid
Formaldehyde
HEPA
Primary filters (two required)
Cat. no.
Price/ea
Shpg wt
KH-33713-52
40 lb (18.2 kg)
KH-33713-62
40 lb (18.2 kg)
KH-33713-72
45 lb (20.5 kg)
KH-33713-82
15 lb (6.9 kg)
*Fume hoods require only one secondary HEPA filter.
Secondary “safety” filters (two required)
Cat. no.
Price/ea
Shpg wt
KH-33713-57
20 lb (9.1 kg)
KH-33713-67
20 lb (9.1 kg)
KH-33713-77
20 lb (9.1 kg)
KH-33713-87*
15 lb (6.9 kg)
Ductless fume hoods are not recommended
where large quantities of contaminants
are produced, such as in acid digestion or
evaporation of solvents to dryness; with toxic
substances; or where unknown reactions are
carried out. For these applications, use
a ducted hood.
Detect-A-Flow
Detect-A-Flow is a
safe, nontoxic, and
economical way
to check airflow—
simply squeeze
bottle to release
powder in air
stream. Unique
formulation
floats longer than
ordinary powders.
2.5-oz bottles.
KH-17782-00 Detect-AFlow airflow powder.
Pack of 3 /pk
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
719
Registration
HO
Web
Table-of-Contents
Hoods
Personal Protection, Ducted
Hamilton Constant Volume/Bypass Fume Hoods
Easy adjustment of airflow for maximum efficiency
A
Hoods
Full-width window, made of laminated safety glass, permits
excellent view of the work surface. The full-width sash has a
recessed finger lift for easy opening from any point. Remove
fumes and vapor efficiently while keeping exhaust volume
constant. An outside control lets you position the baffles and
direct the flow of air. Rectangular exhaust collar reduces noise
and conserves energy. The interior has a white polyresin liner,
and the side walls have interior access panels with PVC gaskets.
Benchtop Hoods fit on 30"D work surfaces. Sash has a safety stop
with override at 18" height.
Walk-in Hoods are ideal when your application requires roll-in
equipment and large laboratory apparatus. Double sashes lift
completely for easy access. The open bottom rests on the
floor—no work surface or cabinet is required. Note: Walk-in hoods
require special assembly after delivery. Please call our Application
Specialists for details.
What’s included: glass window and sash; baffles; exhaust collar;
two 120 VAC outlets; one fluorescent light with two tubes and
switch; and plugged holes for fixture installation.
Catalog
number
Benchtop hoods
KH-41522-00
KH-41520-00
KH-41520-10
KH-41520-20
KH-41520-30
WalKH-in hoods
KH-41521-00
KH-41521-10
KH-41521-20
KH-41521-30
B
Overall dimensions
(W x H x D)
Shpg wt
lb (kg)
36"
48"
60"
72"
96"
233⁄4" x 36" x 53"
48" x 541⁄4" x 311⁄4"
60" x 541⁄4" x 311⁄4"
72" x 541⁄4" x 311⁄4"
96" x 541⁄4" x 311⁄4"
163 (74.0)
694 (315.4)
750 (340.9)
869 (395.0)
1356 (616.3)
48"
60"
72"
96"
48" x 90" x 327⁄16"
60" x 90" x 327⁄16"
72" x 90" x 327⁄16"
96" x 90" x 327⁄16"
1003 (455.9)
1090 (495.4)
1246 (566.3)
1934 (879.0)
A
B
C
D
E
F
E
Motor
1⁄4
hp
hp
1⁄2 hp
1⁄3
Power
VAC
Hz
115
Shpg wt
lb (kg)
92 (41.8)
90 (40.9)
96 (43.6)
60
Price
Shpg wt
lb (kg)
8 (3.7)
720
Transition
dia
8"
10"
12"
14"
5 (2.3)
For duct
size
6" x 9"
6" x 15"
6" x 23"
6" x 30"
Shpg wt
lb (kg)
110 (49.9)
158 (71.7)
205 (93.0)
253 (114.8)
Price
Base Cabinets for Benchtop Hoods only
To fit a 60" hood, order two of the 30" cabinets (41520-60, or -66).
To fit a 72" hood, order two of the 36" cabinets (41520-62, or -68).
To fit a 96" hood, order two of the 48" cabinets (41520-64, or -70).
Lets you transition round duct work into the rectangular exhaust
collar of the hood. Choose 8-, 10, -12-, or 14-inch transitions.
For hood
size
48"
60"
72"
96"
For hood
width
48"
60"
72"
96"
Sturdy steel cabinets have two hinged doors, flush front panel
above the cupboard, recessed toe space, and back service access.
Urethane powder coating provides high chemical resistance.
Choose standard or acid models. Acid cabinets include a rear vent
access, and special 1/4" lining that resists chemical spills. Optional
vent kit vents from cupboard to fume hood; order separately below.
Duct Transitions for Benchtop Hoods only
Catalog
number
KH-41520-90
KH-41520-92
KH-41520-94
KH-41520-96
41521-00
Work Surfaces for Benchtop Hoods only
Catalog
number
KH-41520-50
KH-41520-52
KH-41520-54
KH-41520-56
F
Price
Hood
Blower
Fixtures
Duct transitions
Work surface
Base cabinet
Epoxy resin work surfaces measure 30"L x 11/4" thick.
Fixtures
Catalog
Description
number
Fixtures for water
KH-41521-50
Hot/cold, front
KH-41521-52
Hot/cold, rear
KH-41521-54
Distilled, front
KH-41521-56
Steam, front
Fixtures for gases, air, and vacuum
KH-41521-58
Gas, front
KH-41521-60
Air, front
KH-41521-62
Vacuum, front
KH-41521-64
Nitrogen, front
KH-41521-66
Oxygen, front
D
Price
Blowers
Catalog
number
KH-41520-80
KH-41520-82
KH-41520-84
C
Hood
width
Shpg wt
lb (kg)
3 (1.4)
4 (1.9)
6 (2.8)
7 (3.2)
Price
Catalog
Cabinet
number
width
Standard base cabinets
KH-41520-60
30"
KH-41520-62
36"
KH-41520-64
48"
Acid base cabinets
KH-41520-66
30"
KH-41520-68
36"
KH-41520-70
48"
Overall dimensions
(W x H x D)
Shpg wt
lb (kg)
30" x 351⁄4" x 215⁄8"
36" x 351⁄4" x 215⁄8"
48" x 351⁄4" x 215⁄8"
300 (136.3)
375 (136.3)
450 (136.3)
30" x 351⁄4" x 215⁄8"
36" x 351⁄4" x 215⁄8"
48" x 351⁄4" x 215⁄8"
280 (127.1)
275 (124.8)
350 (159.0)
Price
KH-41520-72 Acid cabinet vent kit. Polyolefin assembly vents from
cupboard to fume hood. Shpg wt 10 lb (4.6 kg)
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Personal Protection, Ducted
HO
Basic™ 47 and 70 Fume Hoods
Perfect when you need a full-sized ventilated hood
to handle small quantities of chemicals
Benefit from renowned Labconco design and quality—while
staying within a limited budget. Basic™ hoods enable safe lightduty chemical handling for a broad range of applications. These
hoods utilize by-pass airflow design to assure safe continuous
ventilation regardless of sash height. All models incorporate
advanced design features such as a removable curved air foil
and an adjustable two-piece baffle to ensure optimal air routing.
Applications should limit long-term exposure to harsh solvents
and highly-corrosive vapors.
All fume hoods include a 3/16" thick tempered safety glass
counterbalanced sash and a 10" diameter duct collar. Hoods are
constructed of glacier white epoxy-coated 16 gauge steel and
include a removable front panel and a 4"L x 41/2"W utility passthrough port with molded neoprene cover. Hoods do not include
a cabinet or work surface—order both from page 731.
Models are available with or without a built-in blower, and in
standard or sparKH-proof configurations. Blowers can be mounted
any of three ways—within the hood, above the hood, or on the
roof of your building.
The 115 VAC models are shipped fully assembled; 220 VAC
models require assembly. Cord and plug are not included.
729–731
For air flow monitors, sash stops,
and other accessories.
Specifications
Fume hood size
Blower size
Construction
Ductwork size
Fixtures
Light*
Switches
(included)
Dimensions†
(exterior)
48-inch basic steel fume hood 33503-10
47-inch
70-inch
motor
3⁄4-hp motor
(XPRF models: 1⁄2-hp)
Epoxy-coated steel
10"
10"
Optional electrical outlet, air/gas/vacuum/water
service connections, and cupsink and faucet—
call our Application Specialists for details.
One 100-watt incandescent (included)
No-blower models: two
No-blower models: two
Standard models: two
Standard models: two
XPRF models: none
XPRF models: none
1⁄3-hp
47"W x 48"H x 25"D
70"W x 48"H x 25"D
Reference Books
Laboratory Ventilation Work
Book, Fourth Edition
By D. Burton, 1994. Contains
numerous charts, forms,
and checklists that describe
typical lab hood exhaust and
associated HVAC systems.
KH-15503-01 Lab Ventilation
Workbook
351 pp. ISBN-0-883992-02-8.
*47-inch and 70-inch sparKH-proof
models have one 100-watt explosion-proof
†
incandescent light. Models with blower module are 53" H.
Ordering Information
Laboratory Fume Hoods
Power
Catalog
Blower
number
VAC
47-inch conventional Basic™ fume hoods
KH-33503-00
115
None‡
KH-33503-05
220
KH-33503-10
115
Standard
KH-33503-15
220
KH-33503-20
115/230
Spark proof
KH-33503-25
220
70-inch conventional Basic™ fume hoods
KH-33504-00
115
None‡
KH-33504-05
220
KH-33504-10
115
Standard
KH-33504-15
220
KH-33504-20
115/230
Spark proof
KH-33504-25
220
‡
Hz
60
50
60
50
60
50
60
50
60
50
60
50
Shpg wt
lb (kg)
Price
A User’s Manual
313 (142)
By G. Saunders, 1993. Improve
your fume hood safety. Learn
how to select, install, upgrade,
and design hoods. Contains
practical information on
specifications, design, testing,
and usage.
426 (193)
KH-15063-12 Lab Fume
Hoods
272 (123)
302 (137)
120 pp. ISBN-1-471-56935-6.
451 (205)
469 (213)
Hood must be used with an existing blower only.
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
721
Registration
HO
Web
Table-of-Contents
Hoods
Personal Protection, Ducted
Fiberglass 30 Laboratory Hoods
Small fume hoods with big benefits
These 30-inch fiberglass fume hoods save space while still offering many of the features
and benefits of the larger hoods. Use these efficient hoods for applications requiring small
work space and good fume removal.
One-piece fiberglass interior gives this hood outstanding chemical- and fire-resistance.
Preset baffle and by-pass airflow design assure consistent ventilation regardless of sash
position. The steel-constructed exterior is glacier white epoxy-coated. Hoods feature a
vertical-rising tempered glass safety sash with epoxy-coated aluminum handle.
Available with or without a built-in blower, in standard or explosion-proof configurations.
Hoods requires a work surface—order separately on page 731. Complete your fume hood
with a variety of accessories, including a storage cabinet, work surface, and an air monitor
from pages 729–731. Call our Application Specialists regarding blower sizing and ordering
service fixtures, electrical duplexes, and other custom features.
What’s included: All models are shipped fully assembled. Hard-wired installations.
Specifications & Ordering Information
Catalog
number
KH-09066-10
KH-09066-20
KH-09066-30
KH-09066-40
KH-09066-50
KH-09066-60
Dimensions (W x H x D)
Overall
Interior
30" x 48" x 301⁄8"
301⁄8"
30" x 48" x
30" x 52" x 301⁄8"
30" x 54" x
301⁄8"
25" x 36" x 225⁄8"
25" x 36" x
225⁄8"
25" x 36" x
225⁄8"
Blower
Vapor-proof
lamp
Shpg wt
lb (kg)
None
110 W
96 (44)
110 W
122 (55)
None
129 ( 59)
1⁄10
hp
1⁄3 hp
1⁄4 hp*
1⁄3 hp*
Price
*Explosion proof—Class I, Group D and Class II, Groups E, F, and G
09066-10
Protector® XL™ Floor-Mounted Hoods
Excellent ventilation for large-scale operations
These walk-in hoods accommodate laboratory procedures that require cumbersome
equipment and a large work area. Applications requiring large-scale filtration, distillation or
extraction apparatus, drums and carboys benefit from the increased height and improved
accessibility of these hoods. By-pass airflow design assures proper ventilation regardless of
sash position. Hoods are available in a variety of widths and depths to suit your operational
requirements.
Tempered safety glass sashes raise smoothly to 58 3/4" from the floor for easy access.
Viewing height is 681/8" from floor. Adjustable baffles provide a uniform face velocity across
the sash opening of the hood. Chemical-resistant white composite interior panel liners
reflect light to maximize illumination. Use two provided service fixtures for water and gas,
convert one or both to air or vacuum, or add up to six optional service fixtures. Factory-wiring
includes fluorescent lights, switches, and a duplex receptacle with ready addition of up to
three more electrical duplexes and an airflow monitor. Hoods have attractive glacier white
epoxy-coated steel surface. Call our Application Specialists to order fixtures, custom racks,
and other accessories.
Specifications & Ordering Information
Catalog
number
4-ft floor-mount hoods
KH-09098-50
KH-09098-52
95"
KH-09098-54
5-ft floor-mount hoods
KH-09098-60
KH-09098-62
95"
KH-09098-64
6-ft floor-mount hoods
KH-09098-70
KH-09098-72
95"
KH-09098-74
8-ft floor-mount hood
KH-09098-80
95"
6-ft floor-mount XL hood 09098-70
Call our Application Specialists
to order fixtures, custom racks,
and other accessories.
847-549-7600
722
Exterior
height
Exterior
depth
Interior
depth
12.81" ID
exhaust
collars
Fluorescent
lamps
Factory wiring
2 service fixtures
1 electrical duplex
Shpg wt
lb (kg)
391⁄4"
451⁄4"
571⁄4"
30"
36"
48"
1
Two, 25"W ea
115 VAC (20 A)
700 (318)
715 (324)
730 (331)
391⁄4"
451⁄4"
571⁄4"
30"
36"
48"
1
Two, 32"W ea
115 VAC (20 A)
800 (363)
820 (372)
840 (381)
391⁄4"
451⁄4"
571⁄4"
30"
36"
48"
1
Two, 32"W ea
115 VAC (20 A)
950 (431)
970 (440)
990 (449)
391⁄4"
30"
2
Four, 25"W ea
115 VAC (20 A)
1400 (635)
Price
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Personal Protection, Ducted
HO
Protector® Premier® Fiberglass Fume Hoods
Excellent chemical resistance and high performance air flow control
These ducted, ventilated fume hoods offer you the utmost in
personal protection and air quality. Hoods are perfect for use
with corrosive and organic materials, but should not be used with
radioactive or biological hazards. (See pages 725–726 for our Class
I and II biological safety enclosures.)
Bypass hoods produce a lower face velocity than models using
separate duct and blower systems, making them ideal for use
with fragile equipment or specimens. Bypass hoods draw in room
air through the open sash. When the sash is closed, air is drawn
through the bypass openings above and below the sash. Bypass
hoods are available with a standard blower, an explosion-proof
blower, or without a blower. Explosion-proof blowers are UL-listed
for Class I, Group D and Class II, Groups E, F, and G.
Interior is constructed of one-piece molded fiberglass. Exterior is
constructed of epoxy-coated steel and is glacier white in color.
Customize your hood with optional service fixtures that
accommodate air, gas, vacuum, and water lines. Models with
fluorescent lights are shipped fully assembled; explosion-proof
models come assembled, but lights must be wired in accordance
with local codes.
Complete your fume hood with a variety of accessories including
blowers, work surfaces, storage cabinets, fire extinguishers, and
air monitors from pages 729–731.
72-inch fume hood 09056-16
Specifications
Fume hood type
Blower specifications
(for models including a blower)
Ductwork connection size
Fixtures (optional)
Lights (included)
Switches (included
for all but XPRF models)
48-inch hoods
60-inch hoods
72-inch hoods
1⁄3-hp motor,
1⁄2-hp motor,
1⁄2-hp motor,
fiberglass construction
fiberglass construction
fiberglass construction
10"
12"
12"
Two with factory-installed plumbing lines
Two 30-watt fluorescent*
Two 40-watt fluorescent*
Two 40-watt fluorescent*
Two—one for blower, one for lights
Call our Application Specialists for
assistance in sizing and selecting
system components.
847-549-7600
*All explosion-proof (XPRF) models have one 100-watt explosion-proof incandescent light.
Ordering Information for as above fume hoods
Blower
Fixtures
Light(s)
48-inch fume hoods measure 48"W x 59"H x 333⁄16 "D
Standard
None
Fluorescent
None
None
Fluorescent
Explosion-proof
None
Explosion-proof
Standard
Two
Fluorescent
None
Two
Fluorescent
60-inch fume hoods measure 59"W x 59"H x 333⁄16"D
Standard
None
Fluorescent
None
None
Fluorescent
Explosion-proof
None
Explosion-proof
Standard
Two
Fluorescent
None
Two
Fluorescent
72-inch fume hoods measure 72"W x 59"H x 333⁄16"D
Standard
None
Fluorescent
None
None
Fluorescent
Explosion-proof
None
Explosion-proof
Standard
Two
Fluorescent
None
Two
Fluorescent
115 VAC, 60 Hz models
Catalog
Price
number
230 VAC, 50 Hz models
Catalog
Price
number
Switches
Shipping
weight
Two
Two
None†
Two
Two
352 lb (160 kg)
327 lb (149 kg)
362 lb (165 kg)
362 lb (165 kg)
337 lb (153 kg)
KH-09010-16
KH-09011-16
KH-09012-16
KH-09013-16
KH-09014-16
KH-09009-16
KH-09020-16
—
KH-98953-00
KH-98953-05
—
Two
Two
None†
Two
Two
409 lb (186 kg)
387 lb (176 kg)
419 lb (190 kg)
419 lb (190 kg)
394 lb (179 kg)
KH-09029-16
KH-09030-16
KH-09031-16
KH-09032-16
KH-09033-16
KH-09045-16
KH-09046-16
—
KH-09047-16
KH-09050-16
—
Two
Two
None†
Two
Two
486 lb (221 kg)
461 lb (210 kg)
496 lb (225 kg)
496 lb (225 kg)
471 lb (214 kg)
KH-09049-16
KH-09053-16
KH-09054-16
KH-09055-16
KH-09056-16
KH-09067-16
KH-09068-16
—
KH-09098-16
KH-09082-16
—
†
Switches for models with explosion-proof components must be furnished by the purchaser to comply with local codes.
Accessory
KH-09070-84 Sash stop
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
723
Registration
HO
Web
Table-of-Contents
Hoods
Personal Protection, Ducted
Protector® XStream™ Laboratory Hoods
Lab safety that pays for itself
Labconco has combined the finest elements of design and construction to produce
hoods for ultimate safety and functionality. XStream’s are low face-velocity hoods that
are safe, efficient, and extremely durable amid the harsh environment of laboratory
fumes. Rigorous research and development produced this design that negates the
effects of air turbulence, vortexing, and cabinet air “roll”—the phenomena that limit
airflow reduction in conventional hoods.
Return on Investment with the XStream comes not only through the savings realized by
running a safe lab and purchasing durable equipment, but through reduced operating
expense. XStream’s low flow velocities mean less energy waste from hood air exhaust.
Using ASHRAE test protocols and OSHA-approved parameters, XStream hoods
maintained superior containment even at face velocities of 60 ft/min. The resultant
calculated energy savings versus normal 100 ft/min operation assumes 0.001¢/cfm
realized over one year of 24 hr/5 day-per-week operation.
cfm savings
at 60 ft/min vs. 100 ft/min
Sash 60% open
Sash 100% open
190
290
240
380
300
470
Hood width
4 ft
5 ft
6 ft
Total annual dollar
savings at 60 ft/min vs 100 ft/min
Sash 60% open
Sash 100% open
760
1,160
960
1,520
1,200
1,880
Enhanced by-pass air flow design ensures consistent ventilation at any sash height.
Sashes are 3/16" thick tempered safety glass. Molded composite panel liners and preset
baffles are chemical-resistant and contribute to even illumination. The high-efficiency,
instant start fluorescent lights are located outside the hood enclosure and are protected
by a cowling at the top of the viewing area.
09099-20
What’s included: All models are shipped fully assembled. Cord and plug
are not included.
Order work surface, blower, cabinet, and accessories on pages 729–731. Call
our Application Specialists to order fixtures, racks, and other custom features.
Upper dilution
air supply
Technical Info—How it Works:
The XStream utilizes a unique double-baffle design that requires
no additional moving parts to move air steadily away from the user to
the back of the hood and out the exhaust. Rows of slots in the primary
baffle allow fumes to be carried straight back before being pulled down
and back up around the secondary baffle by the blower (not included).
This initial downward movement eliminates the horizontal “roll” air
pattern spanning the width of
most hoods.
Containmentenhancing
sash handle
Further user safety is provided
by numerous parallel streams
of fresh air which carry fumes
away from the user. An interior
manifold projects air streams
down parallel to the sash plane,
carrying chemical fumes down
into the laminar flow zone.
The sash handle also contains
a manifold that projects air to
direct fumes away from the user,
toward the back of the hood. The patented front air foil completes the
laminar flow-inducing design and provides an ergonomic resting place
for forearms during prolonged work.
Secondary baffle
Primary baffle
Ergonomic air foil with
clean-sweep openings
Protector XStream Hood Design
Specifications & Ordering Information
Description
4-foot
XStream hood
5-foot
XStream hood
6-foot
XStream hood
8-foot
XStream hood
Exterior
height
Exterior
depth
Interior
Depth
12.81" ID
exhaust
collar(s)
59"
391⁄4"
271⁄4"
1
59"
391⁄4"
271⁄4"
1
59"
391⁄4"
271⁄4"
1
59"
391⁄4"
271⁄4"
1
Fluorescent
Lamps
2
2/1*
2
2/1*
2
2/1*
4
2/1*
Service
fixtures/
electrical duplex
Shpg wt
lb (kg)
0/0
400 (181)
0/0
460 (209)
0/0
520 (236)
0/0
700 (318)
115 VAC, 60 Hz
Catalog
Price
number
KH-09099-00
KH-09099-42
KH-09099-10
KH-09099-52
KH-09099-20
KH-09099-22
KH-09099-30
KH-09099-32
230 VAC, 50 Hz
Catalog
Price
number
KH-09099-44
KH-09099-06
KH-09099-54
KH-09099-16
KH-09099-24
KH-09099-26
KH-09099-34
KH-09099-36
*230 VAC models have 2 service fixtures, but no electrical duplex
Accessory
KH-09070-86 Sash stop
724
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Personal and Materials Protection
HO
Purifier® Delta® Class II, Type A2 Biosafety Cabinets
Protect yourself, your work, and your laboratory environment
Use these cabinets for superb ventilation in the most demanding biological
applications. Typical applications include work with agents that require
Biosafety Level 1, 2, or 3 containment and for antineoplastic drug preparation.
Sophisticated, attention-to-detail design combines with sturdy, flawless
construction and rigorous testing to produce the ultimate environment for
safe handling.
Cabinets HEPA-filter incoming air to provide a working environment with
ISO Class 5 air. The efficiency of the air intake process is enhanced by partial
recirculation of cabinet air through the intake HEPA filter and the proprietary
Air-Wave™ entry system. Cabinet air not recirculated is discharged through a
separate HEPA filter, then returned to the room or exhausted to the outside
through an optional canopy connection. When canopy-connected, these cabinets
may be used for applications involving minute quantities of volatile toxic
chemicals and tracer amounts of radionuclides.
Purifier Delta series cabinets feature a tempered safety glass sash with an antiracking mechanism and 10°-slant construction to reduce glare and improve
ergonomics. Sash fully closes or raises to 18" for easy loading and cleaning.
Eye-level ADA-compliant Minihelic pressure gauge is inside-mounted to assure
that any leakage is HEPA-filtered. Rest forearms comfortably on radiused air foil.
Safety color-coded towel catch maintains constant airflow by preventing wipes
from being drawn into the cabinet’s internal cavity. One-piece 304 SS work
surface is dished for spill containment and removable for easy cleaning. Glarefree fluorescent light. Order with
or without germicidal UV light.
Call our Application Specialists
for base stand information or for
addition of an optional audible/
visual low velocity indicator,
canopy connection kit, or
fixtures.
What’s included: Power cord
includes plug, excluding 230
VAC models. Cabinet requires
initial and periodic on-site
certification.
09095-40
The efficiency of the air intake process
is enhanced by partial recirculation of
cabinet air through the intake
HEPA filter and the proprietary
Air-Wave™ entry system.
Specifications & Ordering Information
Description
3-foot Delta
series cabinet
4-foot Delta
series cabinet
6-foot Delta
series cabinet
Working
opening
sash
10"
Exhaust
volume
(cfm)
253 to 279
8"
203 to 223
10"
339 to 370
8"
269 to 296
10"
503 to 554
8"
403 to 443
115 VAC model
Dimensions
Overall
Interior
(W x H x D)
(W x H x D)
42" x 621⁄4" x 315⁄8"
361⁄2" x 291⁄2"x 291⁄8"
54" x 621⁄4" x 315⁄8"
481⁄2x 291⁄2"x 291⁄8"
78" x 621⁄4" x 315⁄8"
721⁄2" x 291⁄2 x 291⁄8"
Electrical
VAC
Hz
Amps
115
115
230
115
115
230
115
115
230
60
60
50
60
60
50
60
60
50
12
12
7
12
12
7
16
16
8
Shpg wt
lb (kg)
505 (229)
606 (275)
843 (382)
Without
UV lamp
Cat. no.
Price
KH-33500-00
KH-33500-10
KH-09095-30
KH-09095-40
KH-33501-10
KH-09095-44
KH-33502-00
KH-33502-10
KH-09095-64
With
UV lamp
Catalog no.
Price
KH-33500-20
KH-26330-00
KH-26330-05
KH-09095-42
KH-33501-30
KH-09095-46
KH-09095-60
KH-09095-62
KH-09095-66
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
725
Registration
HO
Web
Table-of-Contents
Hoods
Personal and Materials Protection
Envirco Class II, Type A2 Biosafety Cabinets
Protect yourself and your biological materials
Use these well-constructed cabinets to ensure that your biological materials are handled in
a ISO Class 5 environment. The negative pressure plenum design also provides complete
personal protection. Cabinets are suitable for Biosafety levels 1,2, and 3 per CDC/NIH and NCR
criteria. Cabinets are listed under NSF/ANSI Standard 49 and can be used in the preparation of
chemotherapeutic drugs per OSHA requirements.
Air inlet and outlet utilize 99.99% efficient HEPA filters. Magnehelic differential pressure
gauge monitors filter loading. Angled hinged view screen opens to 19" and closes to normal
8" operating clearance to assure proper containment. Audible alarm system signals cabinet
operational readiness and warns of motor/blower failure or exhaust blockage.
Cabinets are all steel with welded, unitized construction. Work area is 16 gauge 304 stainless
steel. Exterior is chemically resistant polyurethane enamel. An exhaust thimble connection for
outside exhaust is standard on 115V models, optional on 230V models.
What’s included: solid-state air speed controller, two fluorescent light tubes, drip-proof duplex
electrical outlet, and 9-foot cord with plug. Order optional cabinet stand and UV light below.
26332-00 on optional
26332-10 stand
Specifications & Ordering Information for class II, type A2 cabinets
Catalog
number
KH-26332-00
KH-26332-05
KH-26332-10
KH-26332-15
Description
Face velocity
100 to 110 ft/min
(30 to 34 m/min)
100 to 110 ft/min
(30 to 34 m/min)
47"
70"*
5-20P
Dimensions
Interior (W x H x D) Overall (W x H x D)
451⁄2" x 26" x 26"
47" x 62" x 321⁄2"
681⁄2" x 26" x 26"
70" x 62" x 321⁄2"
VAC
115
230
115
230
Hz
60
50/60
60
50/60
Electrical
Plug type
Blower hp
6-15P
Speed controller
NEC 5-20P
3⁄4
Solid state
NEC 5-30P
(2) 1⁄3
Digital
5-30P
Shpg
5-30Pwt
lb (kg)
550
(250)
750
(341)
Price
*Not NSF listed
KH-26332-20 Cabinet stand, 47" W x 32" H
KH-26332-21 Cabinet stand, 70" W x 32" H
KH-26332-25 UV Lamp
SafeAire® BioSafety Cabinets
Performance tested protection for your laboratory
l Type
A and A/B3
velocities of 80 or 105 ft/min
SafeAire* Class II Biohazard Safety Cabinets protect you, your product, and
the laboratory environment from exposure and contamination. Designed for
operations requiring Biosafety Level 1, 2, or 3 containment—such as culture
analysis and bacteriological or virological applications. HEPA filters (included)
are 99.99% efficient on particles of 0.3 µm.
l Face
Cabinet interior is manufactured from Type 304 stainless steel and features
radiused corners and a removable work surface. An angled 3/8" (9.5 mm)
thick glass safety sash is included. All models operate on 110 VAC, 60 Hz.
Three- and four-foot–wide models are 15 A; six-foot–wide models are 18 A.
Service fixture models enable connection to gas, air, water, or vacuum sources.
Select UV lamp models for work area decontamination. Visit our Web Site at
www.coleparmer.com to order the required base stand, optional B3 Conversion
Kit, or Canopy Kit (for thimble duct connection to outside ventilation).
What’s included: All models include 1/3-hp blowers (two on 6-foot models),
solid-state speed control, fluorescent lighting, two 115 VAC, 60 Hz outlets,
and differential pressure gauge.
41523-20
Specifications & Ordering Information
Description
Dimensions (W x H x D)
Interior
Overall
3-foot cabinet
361⁄4" x 231⁄2" x 24"
4-foot cabinet
481⁄4"
6 foot cabinet
721⁄4"
x
231⁄2"
x
231⁄2"
x 24"
x 24"
38" x 587⁄16" x 301⁄16"
50" x
587⁄16"
74" x
587⁄16"
*105 ft/min face velocity for 8" sash opening. 726
†
x
301⁄16"
x
301⁄16"
Service
fixtures
N/A
1
N/A
1
2
2
UV lamp
N/A
1
N/A
1
N/A
2
Shpg wt
lb (kg)
475 (215)
630 (286)
960 (435)
8" sash opening*
Catalog no.
Price
KH-41523-00
KH-41523-05
KH-41523-20
KH-41523-25
KH-41523-50
KH-41523-55
10" sash opening†
Catalog no.
Price
KH-41523-10
KH-41523-15
KH-41523-35
KH-41523-40
KH-41523-70
KH-41523-75
80 ft/min face velocity for 10" sash opening.
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Personal and Materials Protection
HO
Horizontal Clean Benches
Spacious enclosures ensure particulate-free materials handling
Sterile air benches filter out particles as small as 0.3 µm with 99.99% efficiency. Easily
load replacement filters from the front. Benches are constructed of epoxy-coated steel
with a plastic-laminate work surface.
Clean benches come fully assembled and include: a prefilter, double gasketed
HEPA filter, a filter condition indicator, a pressure gauge; variable-speed motor/
blower; grounded 115 or 230 VAC electrical receptacle (741/4"W models include two
variable-speed motors and two grounded receptacles); fluorescent lighting; switches
for light, blower and electrical receptacle; and an 8-ft, three-wire cord with plug
(115 VAC models only). Clean benches with UV light also include a 254 nm
UV light and one service fixture (741/4" models have two service fixtures).
Compliance: ETL, Federal Standard 209e
09114-16
Specifications & Ordering Information
Dimensions
(W x H x D)
381⁄4"
501⁄4"
x
481⁄2"
343⁄4"
x
x
481⁄2"
x 343⁄4"
741⁄4" x 481⁄2" x 343⁄4"
Power
VAC
Hz
115
230
115
230
115
230
60
50
60
50
60
50
Catalog
number
KH-09114-00
KH-09114-05
KH-09114-10
KH-09114-15
KH-09114-20
KH-09114-25
Clean benches
Shpg wt
lb (kg)
344 (156)
344 (156)
333 (151)
333 (151)
500 (227)
500 (227)
Price
Clean benches with UV light
Catalog
Shpg wt
Price
number
lb (kg)
KH-09114-06
344 (156)
KH-09114-07
344 (156)
KH-09114-16
392 (178)
KH-09114-17
392 (178)
KH-09114-36
514 (233)
KH-09114-37
514 (233)
Labconco Vinyl Curtain Kits
Use these
curtains as a
barrier to
air-borne
particulates
while your
horizontal clean
bench is not
in use. Vinyl
curtain attaches
to top and
bottom of bench
opening with
nylon-loop fastener, included.
Accessories
For clean
bench size
381⁄4"W
501⁄4"W
741⁄4"W
Base stands
Cat. no.
Price
KH-09114-71
KH-09114-72
KH-09114-73
Replacement prefilter
Cat. no.
Price
KH-09114-90*
KH-09114-91*
KH-09114-91*
Replacement HEPA filter
Cat. no.
Price
KH-09114-02
KH-09114-12
KH-09114-22
*381⁄4"W and 501⁄4"W clean benches require two prefilters; 741⁄4"W clean bench requires three prefilters.
Click
Here
KH-09114-80 Curtain kit for 3-foot Purifier
horizontal clean bench
KH-09114-81 Curtain kit for 4-foot Purifier
horizontal clean bench
KH-09114-82 Curtain kit for 6-foot Purifier
horizontal clean bench
Search online for all our new items—
product lines are continually updated!
www.coleparmer.com
Compact Laminar Flow Cabinet
Negative pressure at the filter seals prevents leaks into the clean air zone.
This compact laminar flow cabinet features epoxy-coated steel top and aluminum base
with acrylic siding. A rear-mounted light box has an 18-watt fluorescent bulb to provide a
well-lit work area. Hinged front screen gives you full access to the cabinet, making cleaning
and installing equipment easy. Order HEPA filter to remove particles down to 0.3 µm with
99.997% efficiency.
What’s included: two-speed fan and 9-ft cord with three-prong plug (European plug on
230 VAC model). Cabinet measures 263/8"W x 37"H x 22"D.
Specifications & Ordering Information
Catalog number
KH-33711-10
KH-33711-15
Description
Laminar flow cabinet
Power
115 VAC/60 Hz
230 VAC/50 Hz
Shipping wt
Price
180 lb (81.7 kg)
KH-33711-60 HEPA filter
KH-33711-64 Stainless steel spill tray
KH-33711-62 Replacement prefilters. Pack of 5
33711-10
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
727
Registration
HO
Web
Table-of-Contents
Hoods
Materials Protection
Purifier® Vertical Clean Benches
and PCR Enclosures
Provide a controlled, particle-free environment
These enclosures feature a 99.99% efficient HEPA filter that removes particles down to
0.3 µm. The built-in blower provides ISO Class 5 (former Class 100) conditions by
circulating air through the HEPA filter and down to the work area. A filter condition
indicator monitors the differential pressure across the HEPA filter for service/replacement
status. Enclosure is designed for benchtop use. The 1⁄4" glass safety sash is angled for easy
viewing of samples and reduced glare. Sash has a 91⁄2" opening for safe operation, and
swings open to a maximum 183⁄4" for loading and cleaning. Prop rod holds sash in place.
Two utility ports with iris openings permit passage of electrical cords or tubing. Order
optional epoxy work surface for added chemical resistance and spill containment. Order
telecoping base stands for ergonomic enclosure height adjustment.
Vertical Clean Benches are typically used for plant tissue culture, media plate preparation,
electronics inspection, medical device assembly, and pharmacy drug preparation.
PCR Enclosures provide a controlled environment for polymerase chain reaction
experiments. The variable digital timer provides UV light exposure continuously or in
user-selected increments of 5, 10, 15, 30, 60, 120, or 240 minutes to deactivate DNA and
RNA contaminants. When the timer expires, the UV light automatically switches off in
preparation for the next experiment.
What’s included: prefilter; HEPA filter; variable-speed motor/blower with blower switch;
filter condition indicator; one fluorescent light and one UV light with three-way switch
(PCR models only); epoxy-coated steel and aluminum interior with two utility
ports; and 61⁄2-ft, three-wire cord with plug (230 VAC models have 91⁄2-ft cord
without plug).
09096-30
Specifications & Ordering Information
Power
Overall dimensions
(W x H x D)
Shpg wt
lb (kg)
Vertical clean benches
Catalog
Price
number
PCR enclosures
Catalog
Price
number
VAC
Hz
115
230
60
50
125 (57)
KH-09096-30
KH-09096-40
KH-09096-35
KH-09096-45
115
230
60
50
160 (73)
KH-09096-53
KH-09096-55
KH-09096-50
KH-09096-60
2-ft enclosure width
24" x 363⁄4" x 281⁄2"
3-ft enclosure width
36" x 363⁄4" x 281⁄2"
Accessories
Enclosure width
2 ft
3 ft
Work surfaces, 3⁄4" thick
Catalog number
Price
KH-33505-50
KH-09114-62
Base stands
Catalog number
KH-09114-74
KH-09114-71
Price
Replacement prefilters
Catalog number
Price
KH-09114-64
KH-09114-66
UV PCR ISO Class 5 Chamber
HEPA filter removes 99.9% of contaminants down to 0.3 µm
Protect your gel samples from contamination using this UV PCR chamber. HEPA filter
28302-50 (sold separately below) provides your workstation with ISO Class 5 clean air,
ensuring continual protection during sample preparation. The seals around the filter are
under negative pressure eliminating the risk of leaks.
The PCR chamber features a built-in 254 nm UV sterilizer. Simply place your labware in
the cabinet between amplifications and press the UV switch. The UV sterilizer destroys all
contaminants in just five minutes and then automatically shuts off.
Compact housing uses minimal bench space and is easily accessible. Stainless steel work
surface is easy to clean. What’s included: prefilter and 9-ft power cord with plug. Order
HEPA filter 28302-50 separately.
Specifications & Ordering Information
Catalog number
KH-28302-00
KH-28302-05
Dimensions
(W x H x D)
243/4"
x
351/2"
x
213/4"
240 VAC
model only
Power
VAC
120
240
KH-28302-50 HEPA filter
KH-28302-52 Prefilter replacement, Pack of 5
728
Hz
60
50
Shpg wt
lb (kg)
Price
133 (60.3)
28302-00
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
HO
Hoods
Materials Protection / Accessories
UV PCR Chamber
Isolation chamber provides protection against Beta radiation
This chamber improves the accuracy of PCR and general tissue culture procedures by
greatly reducing the chance of airborne contamination during DNA sequencing. Airtight
chamber features a built-in UV system rated at 254 nm to decontaminate interior surfaces.
Includes fluorescent and UV germicidal lamps.
Removable doors save valuable laboratory countertop space. If a corner door is
opened, electrical sensors turn off the UV system.
What’s included: flourescent and UV germicidal lamps,
and 9-ft power cord with plug.
Specifications & Ordering Information
Catalog number
Chamber dimensions
KH-34750-75
KH-34750-77
24"W x 28"H x 18"D
Power
VAC
110
220
Hz
60
50
Shpg wt
lb (kg)
Price
110 (49.5)
34750-75
Fume Hood Airflow Monitors
with Visual/Audible Alarm
Wide-Range Airflow
Monitors for Fume Hoods
Verify safe hood operation
Linear readings at low-flow conditions
Electronic monitors feature
lights that indicate normal
or alarm status; audible
alarm warns of potentially
dangerous airflow
­conditions. Set the alarm at
any point between 70 to 250
ft/min. Analog output is
0 to 4 V.
l Simple
field calibration
alarms—audible,
visual, and relay
Use these advanced airflow
monitors to assure the safety
for all lab personnel. Monitors
maintain accurate response
even when using low-flow hood
conditions. Alarms activate
based on sustained low-flow
condition. Use pushbuttons
to set alarm and perform easy
two-point calibration. Monitors
will also indicate high sash
condition (requires proximity
switch, not included) with
configurable time delay.
Record hood performance using
RS-232 connection to computer.
lM
ultiple
Basic Model 33556-00
has a low flow set point
and audible/visual alarms.
Surface ­mountable.
33556-00
Digital Model 33556-06 has
an LCD, high and low alarm
set points, and relay and
analog ­outputs. Includes flush mount to fit
into an ­electrical ­receptacle knockout.
What’s included: mounting hardware,
tubing, sidewall adapter, and a 115 VAC
power adapter with a 6-ft cord.
Graphic display model 33556-60 shows
current flow velocity and provides bar
graph depiction of recent hood airflow
performance. Calibration instructions appear
on-screen. Use night setback to constrain
audible alarm usage or use up to three relays
to switch other laboratory devices based on
hood alarm activation.
33556-06
Specifications & Ordering Information
Cat. no.
KH-33556-00
KH-33556-06
Description
Basic model
Digital model
Range
70 to 250 ft/min
Dimensions
31⁄8"W x 6"H x 17⁄8"D
3"W x 51⁄4"H x 1⁄2"D
33556-50
Price
33556-60
What’s included: mounting bracket for surface mount. Call our
Application Specialists if flush mount (requires 2" x 3" opening)
is preferred.
Specifications & Ordering Information
Catalog
number
KH-33556-50
KH-33556-60
Alarm range,
ft/min (m/s)
30 to 400
(0.15 to 2.0)
0 to 1000
(0 to 5.0)
Power
VAC
Hz
Alarm delay
Face velocity
accuracy
5 sec
±10%
120
60
0 to 10 sec
±10%
120
60
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Price
729
Registration
HO
Web
Table-of-Contents
Hoods
Accessories
Blowers
Durable exhausting for hood systems
Chemical-resistant blowers are perfect for use in moderate to highly corrosive conditions.
All blowers feature an epoxy-coated metal frame, fiberglass-reinforced polyester housing
and a polypropylene impeller.
Light duty blowers are used to exhaust fumes containing low levels
of corrosive or organic contaminants. Not recommended for demanding laboratory
exhaust systems.
Specifications & Ordering Information for Chemical-Resistant Blowers
Catalog
number
KH-09078-00
KH-09078-10
KH-09078-40
KH-09078-50
KH-09078-60
KH-09078-90
Blower type
Motor
1⁄3
hp
hp
hp
1⁄3 hp
1⁄2 hp
1⁄4 hp
1⁄2
Standard
1⁄4
Explosion proof
(XPRF)
Volume
[email protected]
370 @ 373
720 @ 569
520 @ 962
720 @ 569
960 @ 720
700 @ 1173
VAC
115
115
115
115
115/230
115
Power
Hz
60
60
60
60
60
60
Shpg wt
lb (kg)
90 (40.9)
96 (43.6)
92 (41.8)
90 (40.9)
102 (46.3)
92 (41.8)
A
5.4
8.4
4.4
6.4
9/4.5
4.5
Price
Specifications & Ordering Information for Light Duty Blowers
Power: 115 VAC, 60 Hz, single phase
09078-00
Catalog
number
KH-33704-75
KH-33704-80*
KH-33704-85*
Description
350 watt blower
1⁄2 hp blower
3⁄4 hp blower
Collar diameter
Inlet
Outlet
6"
5"
5"
4"
5"
5"
Air
350 cfm
600 cfm
800 cfm
Noise level
(at 10 ft)
65 dB(A)
70 dB(A)
71 dB(A)
Price
*Also available as 3-phase model. Contact our Applications Specialists for details.
Call our Application Specialists for
assistance in selecting a blower.
847-549-7600
Filtermate™ portable
exhauster 09100-60
FilterMate Portable Exhausters
™
Use these air filtration units to pull airborne fumes and
powder through your XPert Balance Enclosure or XVS
Ventilation Station (sold on page 717). Filter removes
contaminants before returning air to room or exhausting
to outside. Specify efficient, high-load filters to remove
general organics, particulates (HEPA filter), or both. Adjust
airflow to give optimal performance. Order optional filters
for formaldehyde and ammonia. HEPA filter models are
available for external exhaust using a thimble connection.
FilterMate exhausters have compact, corrosion-resistant
housings of white and gray epoxy-coated steel. Rubber
feet. Variable-speed blower operation is quiet with a
unique perforated exhaust cover. Includes IEC 3-wire
electrical cord with plug.
Specifications & Ordering Information
Description
Dimensions
(W x H x D)
HEPA filter included
14" x 223⁄4" x 23"
Carbon-based filter required
14" x 223⁄4" x 23"
HEPA filter included
185⁄8" x 243⁄4" x 23"
HEPA filter included,
carbon-based filter required
15" x 223⁄4" x 23"
730
Airflow potential
volume velocity
(ft/min face velocity)
250 cu ft/min
(60 to 100 ft/min)
250 cu ft/min
(60 to 100 ft/min)
250 cu ft/min
(60 to 100 ft/min)
200 cu ft/min
(60 to 100 ft/min)
Filtermate™ Accessories
Catalog number
KH-09101-51
KH-09101-52
KH-09101-54
KH-09101-56
KH-09101-58
KH-09101-61
KH-09101-62
KH-09101-64
Description
Organic filter cell (12 lb activated carbon media)
Formaldehyde filter cell (14 lb treated carbon media)
Ammonia filter cell (16 lb treated carbon media)
HEPA filter cell, replacement
HEPA filter cell bag, replacement
Work surface, 2' wide, black
Work surface, 3' wide, black
Work surface, 4' wide, black
115 VAC
Price
230 VAC
Exhaust
Connection
Catalog number
None
KH-09100-60
KH-09100-62
Price
Catalog number
None
KH-09100-65
KH-09100-67
6" thimble
to outside
KH-09100-70
KH-09100-72
None
KH-09100-75
KH-09100-77
Price
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
Registration
Web
Table-of-Contents
Hoods
Accessories
HO
Accessories
Base Storage Cabinets
afely store flammable and corrosive liquids
S
Meet all UL, OSHA, NFPA standards
Cabinets are built of ­­corrosion-resistant epoxy-coated steel.
Cabinets have four leveling legs and rear vent panels.
l
l
Solvent cabinets feature gliding bi-fold, ­spring-loaded doors
that close automatically in case of fire; include one epoxycoated steel shelf. Standard and acid cabinets have doors
that swing out. Acid cabinets feature corrosion-resistant
polyethylene-lined interiors.
09114-71 stand
for base cabinets
Work Surfaces are sold separately below. Spillstopper work
surfaces keep accidental spills and liquids away from the
seam between the hood wall and surrounding countertop.
Specifications & Ordering Information
Catalog number
Description
For hood size
Dimensions (W x H x D)
Cabinets. Each includes one 8" filler panel to accommodate 30"D of work surface.
KH-09115-28
Standard
35" x 353⁄4" x 22"
KH-09115-26
Solvent
35" x 353⁄4" x 22"
28"
KH-09115-24
Acid
35" x 37" x 22"
KH-09115-00
Standard
KH-09115-02
Solvent
30"
30" x 351⁄2" to 363⁄4" x 22"
KH-09115-04
Acid
KH-09115-06
Standard
48"
48" x 351⁄2" to 363⁄4" x 22"
KH-09115-08
Solvent
KH-09115-12
Standard
60"
60" x 351⁄2" to 363⁄4" x 22"
KH-09115-14
Solvent
KH-09115-18
Standard
72"
72" x 351⁄2" to 363⁄4" x 22"
KH-09115-20
Solvent
Work surfaces
KH-09115-30
48"
48"W x 30"D
KH-09115-32
60"
60"W x 30"D
Spillstopper
KH-09115-34
72"
72"W x 30"D
KH-09115-46
28"
35"W x 30"D
Flat
KH-09115-40
36"
36"W x 30"D
solid
KH-09115-42
48"
48"W x 30"D
epoxy
KH-09115-44
72"
72"W x 30"D
Base stands
KH-09114-74
24"
24"
24" x 271⁄2" to 331⁄2" x 291⁄4"
KH-09114-71
36"
36"
36" x 271⁄2" to 331⁄2" x 291⁄4"
KH-09114-72
48"
48"
48" x 271⁄2" to 331⁄2" x 291⁄4"
KH-09114-75
60"
60"
60" x 271⁄2" to 331⁄2" x 291⁄4"
KH-09114-73
72"
72"
72" x 271⁄2" to 331⁄2" x 291⁄4"
Shpg wt
Price
200 lb (90 kg)
210 lb (95 kg)
262 lb (119 kg)
09115-02
155 lb (70.8 kg)
260 lb (118 kg)
310 lb (141 kg)
360 lb (163 kg)
110 lb (49.9 kg)
150 lb (68.1 kg)
205 lb (93 kg)
90 lb (41 kg)
90 lb (41 kg)
110 lb (49.9 kg)
205 lb (93 kg)
09115-06
Cabinets for storing solvents
and flammable liquids.
63 lb (28.6 kg)
72 lb (32.7 kg)
80 lb (36.3 kg)
88 lb (40.0 kg)
96 lb (43.6 kg)
Labconco Automatic Fire Extinguisher
l Mount
directly inside hood for extra safety
Get 24-hour protection against Class A, B, and C fires in fume
hoods and storage cabinets. Fire extinguisher automati­cally
goes off if heat melts the fusible link set at 165°F (74°C). Includes
a visual pressure gauge for inspection.
Fire extinguisher requires no plumbing or electrical connections
and mounts directly to wall of cabinet. Order one extinguisher
for 48" and 60" hoods, two for 72" hoods. Recharge­able.
Sash Stop
Ordering Information
Description
Fire extinguisher
KH-98953-10
for Basic™ fume hoods
on page 721
Fire extinguisher
KH-09070-60
for other Labconco fume hoods
Cat. no.
Price
Ordering Information
Sash stop restricts the sash opening height of your fume hood.
With the sash kept in a lowered position, the exhaust volume
demand on the blower is reduced. Release the sash stop to open
the sash completely for easier hood loading and cleaning.
Cat. no.
KH-09070-80
Description
Sash stop
Price
U.S. 800-323-4340 toll-free, 847-549-7600 (outside the U.S.), www.coleparmer.com
Canada 800-363-5900 l India 91-22-6716-2222 l UK 0500-345-300
l
731
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement