Baldor MicroFlex FMH2A01TR-EN23, FMH2A03TR-EN23, FMH2A06TR-EN23, FMH2A09TR-EN23 servo drive Installation Manual

MicroFlex FMH2A01TR-EN23, MicroFlex FMH2A03TR-EN23, MicroFlex FMH2A06TR-EN23, MicroFlex FMH2A09TR-EN23 are versatile brushless servo drives, providing a flexible and powerful motion control solution for rotary and linear motors. They offer a range of models with continuous current ratings of 1A, 3A, 6A or 9A.

PDF Download
Document
Baldor MicroFlex FMH2A01TR-EN23, FMH2A03TR-EN23, FMH2A06TR-EN23, FMH2A09TR-EN23 Installation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Single axis AC brushless drive
  • Continuous current ratings of 1A, 3A, 6A or 9A
  • Direct connection to 115VAC or 230VAC single-phase or 230VAC three-phase supplies
  • SSI, incremental encoder, or resolver feedback
  • Velocity and current control, with step and direction input for position control
  • Auto-tuning wizard and software oscilloscope facilities
  • 2 optically isolated digital inputs
  • 1 optically isolated digital output
  • 1 general-purpose analog input
  • RS232 or RS485 communications

Frequently asked questions

The MicroFlex will operate with a large range of brushless rotary and linear servo motors.

The MicroFlex must be mounted vertically on its rear side, the side opposite the front panel.

The 1A and 3A models are designed to operate without any additional cooling methods. The 6A and 9A models require a forced air flow, passing vertically from the bottom to the top of the MicroFlex case, to allow full rated current at 45°C (113°F).
ALP:
Preparing document for printing…
0%