Philips 15MF200V - Lcd 15 Inch Owner`s manual

Philips 15MF200V - Lcd 15 Inch Owner`s manual
OWNER’S MANUAL
LCD TV Monitor
15MF200V/37
NEED HELP? CALL US!
MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH
ANY QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE
YOU THROUGH CONNECTIONS, FIRST-TIME SETUP, AND ANY OF
THE FEATURES. WE WANT YOU TO START ENJOYING YOUR NEW
PRODUCT RIGHT AWAY.
CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.MAGNAVOX.COM
Important!
Return your Warranty Registration Card within 10 days.
See why inside.
IB8452E001
Return your Warranty Registration card today to ensure
you receive all the benefits you’re entitled to.
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning
a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your
purchase at once. And take advantage of these important benefits.
Owner
Confirmation
Model
Registration
Registering your product within 10 days
confirms your right to maximum protection
under the terms and conditions of your
MAGNAVOX warranty.
Your completed Warranty Registration Card
serves as verification of ownership in the
event of product theft or loss.
Returning your Warranty Registration Card
right away guarantees you’ll receive all
the information and special offers which you
qualify for as the owner of your model.
S REG
safetysymbols
D
ry!
r
u
H
IT
AY
Know these
ATION
EEDED W
Congratulations on your purchase,
and welcome to the “family!”
R
ST
N
I
Warranty
Verification
HIN 10
Dear MAGNAVOX product owner:
Thank you for your confidence in MAGNAVOX.You’ve selected one of
the best-built, best-backed products available today.We’ll do everything
in our power to keep you happy with your purchase for many years to
come.
As a member of the MAGNAVOX “family,” you’re entitled to
protection by one of the most comprehensive warranties and
outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the
information and special offers for which you qualify, plus easy
access to accessories from our convenient home shopping network.
Most importantly, you can count on our uncompromising commitment
to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in a
MAGNAVOX product.
P.S. Remember, to get the most from your MAGNAVOX
product, you must return your Warranty Registration
Card within 10 days. So please mail it to us right now!
“bolt of lightning” indicates
t This
uninsulated material within your unit
may cause an electrical shock. For the
safety of everyone in your household,
please do not remove product covering.
The “exclamation point” calls attention to features for which you
should read the enclosed literature
closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot,
fully insert.
ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus
large de la fiche dans la borne correspondante de la prise et pousser jusqu’au
fond.
s
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No.________________________
Serial No. ________________________
Visit our World Wide Web Site at http://www.magnavox.com
2
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
B. Objects have fallen or liquid has been spilled into the appliance;
C. The appliance has been exposed to rain;
D. The appliance does not appear to operate normally or exhibits a
marked change in performance;
E. The appliance has been dropped or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet, which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.
Section 810 of the National Electrical Code, ANSI/NFPA No. 701984, provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding connectors, location of
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
21. Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
22. Battery usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong.The wide blade or third prong are provided for your safety.
When the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table speci
fied by the manufacturer or sold with the apparatus.When
a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
if the power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, or if the apparatus has
been exposed to rain or moisture, does not operate normally, or
has been dropped.
15. This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance (www.eiae.org).
16. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
Note to the Cable TV system installer: This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system
of the building, as close to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electrical Code
3
CONTENTS
Introduction
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Getting Started
Basic TV and Remote Control Operations . . . . . . . .5
Description of Remote Control Buttons . . . . . . . . . . . . . . . .6
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Basic Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . .7
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Using the Audio/Video Input Connections . . . . . . . . . . . . . .9
S-Video Jack Connections . . . . . . . . . . . . . . . . . . . . . . . . .10
PC (Monitor) Connections . . . . . . . . . . . . . . . . . . . . . . . . .11
Install Menu
How to use the Tuner Mode Control . . . . . . . . . . . .12
How to Auto Program TV Channels . . . . . . . . . . . .13
How to Add or Delete Channels (Store) . . . . . . . . . . . . . . .14
How to use SmartSurf (Alternate Channel) . . . . . . . . . . . .15
Here are a few of the special features of your new LCD
Monitor.
Audio/Video In Jacks: Use to quickly connect other equipment
to your LCD TV Monitor.
Automatic Channel Programming (Auto Program):
Quick and easy setup of available channels.
Closed Captioning: Allows the viewer to read TV program dialog or voice conversations as on-screen text.
On-screen Menus: Helpful messages (in English or Spanish) for
setting TV controls.
Remote Control: Works your LCD TV Monitor features.
Sleep Timer: Turns off the LCD TV Monitor within an amount
of time you specify (30-120 minutes from the current time).
SmartLock™: Lets you block viewing of certain TV channels if
you do not want your children viewing inappropriate material.
Standard broadcast (VHF/UHF) or Cable TV channel capability
Stereo capability: Includes a built-in amplifier and twin-speaker
system, allowing reception of TV programs broadcast in stereo.
Treble, Bass, and Balance: Enhance the LCD TV Monitor’s
sound.
Fine Tune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Picture Menu
NOTE: This manual covers different versions and models.
Not all features described in this manual will match those of
your LCD TV Monitor. This is normal and does not require
you contacting your dealer or requesting service.
How to use the Picture Adjustment Controls . . . . .17
Sound Menu
How to use the Sound Adjustment Controls . . . . . .18
Features Menu
Understanding the SmartLock™ Controls . . . . . . .19
Setting up the SmartLock™ Access Code . . . . . . . . . . . . .20
How to Block Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Blocking Programming Based on Movie Ratings . . . . . . .22
Blocking Programming Based on TV Ratings . . . . . . . . . .23
Setting the Sleeptimer Control . . . . . . . . . . . . . . . . . . . . . .24
How to use the Closed Captioning Control . . . . . . . . . . . .25
Freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
How to use the Language Control . . . . . . . . . . . . . . . . . . .27
Resetting the Factory Settings . . . . . . . . . . . . . . . . . . . . . .28
END-OF-LIFE DISPOSAL
Your new LCD TV Monitor and its packaging contain materials
that can be recycled and reused. Specialized companies can
recycle your product to increase the amount of reusable materials and minimize the amounts that need to be properly disposed.
Your product also uses batteries that should not be thrown
away when depleted, but should be handed in and disposed of
as small chemical waste.
When you replace your existing equipment, please find out
about the local regulations regarding disposal of your old television, batteries, and packing materials.
PC Mode
PC Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
PC Image Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
PC Sound Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
PC Color Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
PC Feature Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Setting Up the PC Mode . . . . . . . . . . . . . . . . . . . . . . . . . .34
General Information
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . .35
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . . .38-39
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
SmartLock™ is a registered trademarks of Philips Consumer
Electronics North America.
Copyright © 2003 Magnavox. All rights reserved.
4
BASIC TV AND REMOTE CONTROL
OPERATIONS
TELEVISION
Press VOLUME + to increase the
sound level. Or, press VOLUME – to
lower the sound level.
INPU
CH.
VOL.
AUDI
O
Press CH3 or CH2 to select
channels.
MEN
U
1
2
3
Press POWER y to turn on the
LCD TV Monitor.
T
REMOTE CONTROL
4
Point the remote control toward
the remote sensor on the front of the
LCD TV Monitor when operating the
LCD TV Monitor with the remote.
2 3
1
4
BATTERY INSTALLATION
5
6
Remove the battery compartment lid on the back of the remote.
7
Reattach the battery compartment lid.
1
Place two AAA batteries in the
remote. Be sure the (+) and (-) ends
of the batteries line up as marked
inside the battery compartment.
5
7
6
5
REMOTE CONTROL
Video Source button
Press to select the video input
source: PC/Video/TV.
Audio Source button
Press to select the video input
source: PC/AV/TV.
Sleep button
Press to set the LCD TV Monitor to
turn itself off within a certain time.
Details are on page 23.
Standby (Power) button
Press to turn the LCD TV Monitor)
on or off.
Status button
Press to display the current system
status (ie, channel).
MTS Button
Press to select a sound mode if available with the TV programming:
Mono, Stereo, or SAP. Details on
page 17.
Picture button
Press to Auto adjust the PC function. Details are on page 27. Also
press this button to adjust some of
the LCD TV Monitor picture menu
items.
Mute button
Press to eliminate or restore the
LCD TV Monitor sound. Mute on
will appear on the screen when the
sound is muted.
Menu button
Press to see the menu. Also press
to exit the onscreen menu.
CH(annel) UP button
Press to adjust the channel up. Also
press to select or adjust items in the
menu.
VOL(ume) - button
Press to decrease the sound. Also
press to select or adjust items in
the menu.
VOL(ume)+ button
Press to increase the sound. Also
press to select or adjust items in the
menu.
CH(annel) DN button
Press to adjust the channel down.
Also press to select or adjust items
in the menu.
Smart Surf Button
Press to store your favorite channel.
Details on page 15.
100 Button
Press to select the channel from 100
to 125.
Number buttons
Press to select TV channels. When
selecting single-digit channels, press
the number of the desired channel.
The LCD TV Monitor will pause for
a few seconds then tune to the
selected channel.
A/CH button
Press to alternate from current
channel selection to previous channel selection.
6
ANTENNA CONNECTION
A
combination antenna receives normal
broadcast channels (VHF 2–13 and
UHF 14–69). Your connection is easy
because there is only one 75Ω (ohm)
antenna jack on the back of your TV,
and that’s where the antenna goes.
1
2
TV
Outdoor or Indoor Antenna
(Combination VHF/UHF)
If your antenna has a round cable
(75 ohm) on the end, then you're ready
to connect it to the LCD TV Monitor.
If your antenna has flat, twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the screws
on a 300- to 75-ohm adapter.
S-VIDEO
VIDEO
DC IN
1
ANALOG
2 AUDIO OUT
AUDIO
1 2
Connect the antenna (or adapter) to
the TV jack on the rear of the LCD
TV Monitor. If the end of the antenna
wire is threaded, screw it down finger
tight.
Rear Jack panel of
Television
Twin-lead
wire to
300-75Ω
adapter
TV
OR
Antenna
with 75Ω
cable
BASIC CABLE TV CONNECTION
Y
our Cable TV signal into your home may
be a single, 75Ω (ohm) cable. If so, this
connection is very simple. Follow the step
below to connect your Cable TV signal to
your new LCD TV Monitor.
TV
S-VIDEO
VIDEO
1
Connect the Cable TV signal to the TV
jack on the LCD TV Monitor. Screw it
down finger tight.
DC IN
ANALOG
1
2
AUDIO OUT
AUDIO
Rear Jack panel of
Television
Cable TV signal from
Cable Company
(75Ω coaxial cable)
1
TV
7
CABLE BOX CONNECTIONS
you have a Cable Box, follow either set of
Ifthese
steps to complete your connections.
Cable TV signal from
the Cable Company
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound to
the LCD TV Monitor. The sound from the Cable
Box will be monaural (single-channel, not left and
right).
Connect the Cable TV signal to the
IN jack (or RF IN or CABLE IN) on the
Cable Box.
1
2
3
4
1 2
OUTPUT
CH
CABLE
IN
3
TO TV
4
Connect an RF coaxial cable (not supplied)
to the OUT jack (or TO TV or RF OUT)
of the Cable Box.
3
Connect the other end of the coaxial
cable to the LCD TV Monitor’s TV jack.
Screw it down finger tight.
75Ω
Coaxial
Cable
TV
TV
Set the Channel 3/4 (or Output channel)
switch of the Cable Box to 3 or 4. Set
the TV to the same channel. When
watching TV programming, change channels
at the Cable Box, not the LCD TV Monitor.
S-VIDEO
VIDEO
DC IN
ANALOG
1
2
AUDIO OUT
Rear jack panel of
Television
AUDIO
Cable Box with Audio/Video Out Jacks
This connection will supply Stereo sound to the
LCD TV Monitor.
Connect the Cable TV signal to the
IN jack (or RF IN or CABLE IN) on the
Cable Box.
1
2
3
4
TV
Using an RCA-type video cable, connect
one end of the video cable to the
Video Out jack of the Cable Box.
Connect the other end of the cable to
the yellow VIDEO jack on the rear of
the TV.
Video cables are usually marked with yellow and are available from Magnavox or
electronics retailers. Video jacks on most
equipment are yellow.
Using RCA-type, stereo audio cables, connect one end of the cables to the left
and right Audio Out jacks of the
Cable Box.
Connect the other end of the cables
to the red and white AUDIO ends of
the audio cable supplied. Connect
the other end of that cable to the
Audio 2 jack on the rear of the LCD
TV Monitor.
Audio cables are usually marked with red
and white and are available from Magnavox
or electronics retailers.
The right audio jack is red and the left
audio jack is white. Match the cable colors
to the jack colors.
Plug the DC adapter into the DC IN
jack on the LCD TV Monitor. Plug
the power cable into an outlet. Press
the Video Source button for the
source you are using.
TV
S - VIDEO
S-VIDEO
VIDEO
VIDEO
DC IN
ANALOG
1
2
AUDIO OUT
AUDIO
Rear Jack Panel
of Television
2
4
DC IN
2
1
ANALOG
AUDIO OUT
Video Cable
AUDIO
3
DC Adapter
Audio Cable
Power
Cable
Cable
TV signal
1
OUTPUT
CH
3
CABLE
IN
TO
TV
4
L
AUDIO
OUT
Cable Box
8
R
VIDEO
OUT
AUDIO/VIDEO INPUT CONNECTIONS
T
he AUDIO and VIDEO In jacks on the
rear of the LCD TV Monitor enable quick
connections of other equipment. Connect a
VCR, DVD Player, Video Game, Camcorder,
etc., to these jacks. To view the material playing on the other equipment, set the LCD TV
Monitor to its VIDEO input channel.
TV
TV
S - VIDEO
S-VIDEO
VIDEO
VIDEO
DC IN
ANALOG
1
2
Rear Jack Panel
of Television
AUDIO OUT
AUDIO
1
2
Connect an RCA-style video cable
(usually yellow) to the VIDEO OUT
jacks of the other equipment (DVD
Player, Camcorder, etc.) and to the yellow VIDEO jack on the rear of the
LCD TV Monitor.
If the other equipment has red and
white, left and right, stereo audio out
jacks: Connect RCA-style audio
cables (usually red and white) to the
AUDIO OUT (left and right) jacks on
the other equipment. Connect the other
end of the cables to the red and white
AUDIO cable (provided). Connect the
AUDIO cable provided to the AUDIO
2 jack on the rear of the LCD TV
Monitor. The LCD TV Monitor will
receive sound from the other equipment in stereo (from the left and right
sound channels).
1
DC IN
3
3
4
5
Press the Video Source buttons to set
the TV to its VIDEO channel.
1
2
Power Cable
Video Cable
Audio Cable
3
5
DVD
4
Press PLAY on the other equipment to
view its material on the TV.
9
AUDIO OUT
AUDIO
2
If the other equipment has only one
AUDIO OUT (white) jack: Connect
an audio cable to the AUDIO OUT
jack on the other equipment. Connect
the other end of the cable to the white
AUDIO 2 jack on the rear of the LCD
TV Monitor. The LCD TV Monitor
will receive sound from the other
equipment through a single audio
channel.
Plug the DC Adapter into the DC IN
jack on the TV. Plug the power
cable into an outlet. Turn on the TV
and other equipment.
ANALOG
DC Adapter
S-VIDEO CONNECTIONS
T
he S(uper)-Video connection on the rear of the
LCD TV Monitor can provide you with better
picture detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and SVHS VCR (video cassette recorder) tapes than the
normal antenna picture connections.
TV
TV
S - VIDEO
S-VIDEO
VIDEO
VIDEO
DC IN
ANALOG
1
2 AUDIO OUT
AUDIO
Rear Jack Panel
of Television
NOTE: The accessory device must have an SVIDEO OUT(put) jack in order for you to complete
the connection on this page.
1
Connect an S-Video cable to the SVIDEO jack of the other equipment
(DVD Player, Camcorder, etc.) and to
the S-VIDEO jack on the rear of the
LCD TV Monitor.
2
If the other equipment has red and
white, left and right, stereo audio out
jacks: Connect RCA-style audio
cables (usually red and white) to the
AUDIO OUT (left and right) jacks on
the other equipment. Connect the other
end of the cables to the red and white
AUDIO cable (provided). Connect the
AUDIO cable provided to the AUDIO
2 jack on the rear of the LCD TV
Monitor. The LCD TV Monitor will
receive sound from the other equipment in stereo (from the left and right
sound channels).
DC IN
3
4
Press the Video Source buttons to set
the LCD TV Monitor to its VIDEO
channel, if the LCD Monitor does not
automatically detect a source change.
5
Press PLAY on the other equipment to
view its material on the LCD TV
Monitor.
2
1
AUDIO OUT
AUDIO
2
3
S- Video
Cable
Audio Cable
Power Cable
OUT
R AUDIO
VCR or External
Accessory Device
(with S-Video
Output)
If the other equipment has only one
AUDIO OUT (white) jack: Connect
an audio cable to the AUDIO OUT
jack on the other equipment. Connect
the white end of the cable to the white
end of the audio cable supplied.
Connect the other end of that cable to
the AUDIO 2 jack on the rear of the
LCD TV Monitor. The LCD TV
Monitor will receive sound from the
other equipment through a single audio
channel.
Plug the DC Adapter into the DC IN
jack on the LCD TV Monitor. Plug
the power cable into an outlet. Turn
on the LCD TV Monitor and other
equipment.
1
ANALOG
DC Adapter
4
10
IN
OUT
L
S-VHS OUT
VIDEO
ANTENNA
IN
IN
ANTENNA
OUT
3
5
PC (MONITOR) CONNECTION
T
his LCD TV Monitor can be used as a PC
Monitor. Your computer will have to be
equipped with a VGA type video output and
VGA cable.
TV
S-VIDEO
VIDEO
1
2
3
4
Connect one end of the VGA Video
cable to the Monitor (video) output on
the computer to the ANALOG rear
jack panel on the LCD TV Monitor.
Although audio connections are not
required, the LCD TV Monitor can
reproduce the computers audio out by
an AUDIO ADAPTER (supplied) to
the Audio output jack on the computer
(if available) while connecting the
other ends of the Audio cables to the
AUDIO 1 Input Jacks on the bottom of
the TV. Press the Audio Source button
until AUDIO1:PC appears so the TV
tunes to the computer audio signal.
DC IN
1
2 AUDIO OUT
AUDIO
Rear Jack Panel
of Television
DC IN
ANALOG
1
1
DC Adapter
VGA
Cable
Turn the LCD TV Monitor and the
Computer ON.
Press the VIDEO SOURCE button
until PC MODE appears on the screen.
ANALOG
2 AUDIO OUT
AUDIO
2
Audio Cable
Power Cable
Computer
4
11
3
HOW TO
USE THE TUNER
MODE
T
he TUNER MODE allows you to change
the LCD TV Monitor’s signal input to
CABLE or AIR (antenna). It’s important for
the LCD TV Monitor to know if you want to
receive channels from a cable TV signal or an
antenna signal.
1
2
3
4
5
6
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
Press the MENU button on the
remote control to see the onscreen
menu.
Press the (CH UP) or (CH DN)
buttons to highlight the TV INSTALL
menu.
Press the (VOL+) or (VOL-) buttons to enter the TV INSTALL menu.
:SELECT
NO
AIR
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
YES
MENU
2 3
4 5
Press the (CH UP) or (CH DN)
buttons to highlight the TUNER
MODE control.
Press the (VOL+) or (VOL-) buttons to select CABLE or AIR (antenna).
Press the MENU button repeatedly to
clear the menu from the screen.
2
4
HELPFUL HINT
When CABLE is selected, channels 1-125
are available.
When AIR (antenna) is selected, channels
are 2-69.
12
MENU
:EXIT
OR
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
:SELECT
3
5
YES
:EXIT
:SELECT
1
6
NO
AIR
NO
CABLE
YES
MENU
:EXIT
AUTO PROGRAM (SETTING UP CHANNELS)
Y
our LCD TV Monitor can automatically
set itself for local area (or cable TV)
channels. This makes it easy for you to select
only the TV stations in your area by pressing
the CH UP or CH DN button.
1
2
3
4
5
6
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
Press the MENU button on the
remote control to show the onscreen
menu.
:SELECT
Press the (CH UP) or (CH DN)
buttons to highlight the TV INSTALL
menu.
Press the (VOL-) or (VOL+) buttons to enter the TV INSTALL menu.
Press the (CH UP) or (CH DN)
buttons to highlight the AUTO PROGRAM control.
NO
AIR
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
YES
MENU
:SELECT
1
6
2 3
4 5
3
5
2
4
AUTO PROGRAM
CHANNEL
MENU
HELPFUL HINT
After you’ve run Auto Program, check out
the results. Press the CH+/UP or the CHDN button and see which channels you can
select.
Remember, an antenna or cable TV signal
must first be connected to your LCD TV
Monitor (see pages 7-10 of this owner’s
manual).
13
YES
:EXIT
Press the (VOL+) or (VOL-) button to start the Auto Program scanning
of channels.
Press the MENU button repeatedly to
clear the menu from the screen.
NO
AIR
:EXIT
02
MENU
:EXIT
STORE
S
tore lets you edit the channel listing. You
can add or remove a channel in the LCD
TV Monitor’s memory.
1
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
Press the number buttons or the
(CH UP) or (CH DN) buttons
to tune to a specific channel that you
want to add or remove from the LCD
TV Monitor’s memory.
2
3
4
5
6
Press the MENU button to show the
onscreen menu.
7
Press the MENU button repeatedly to
clear the menu from the screen.
:SELECT
Press the (CH UP) or (CH DN)
buttons to select STORE.
Press the (VOL+) or (VOL-)
button to highlight YES to add the
channel or NO to delete it from the
LCD TV Monitor’s memory.
Repeat steps 1-7 to add or delete additional channels to or from the LCD TV
Monitor Monitor’s memory.
TV INSTALL
YES
MENU
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
1
3
5
2
7
4
6
1
3
5
4
6
1
14
NO
AIR
YES
:EXIT
:SELECT
Press the (CH UP) or (CH DN)
buttons to highlight the TV INSTALL
menu.
Press the (VOL+) or (VOL-)buttons to enter the TV Install Menu.
NO
AIR
MENU
:EXIT
OR
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
:SELECT
NO
AIR
NO
MENU
:EXIT
SMART SURF
S
mart Surf lets you set up channels in a
quick viewing list Then, you can use the
Smart Surf button on the remote control to
switch between different TV programs (channels) that interest you.
1
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
Press the number buttons or the
(CH UP) or (CH DN) buttons
to tune to a specific channel that you
want to add to the Smart Surf feature.
:SELECT
NO
AIR
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
YES
MENU
2
3
4
5
6
7
Press the MENU button repeatedly to
clear the menu from the screen.
Press the (CH UP) or (CH DN)
buttons highlight the TV INSTALL
menu.
Press the (VOL+) or (VOL-) buttons to enter the TV Install Menu.
Press the (CH UP) or (CH DN)
buttons to select SMART SURF.
Press the (VOL+) or (VOL-) buttons to highlight YES to add the channel to your Smart Surf list or NO to
remove the channel from the list.
1
3
5 4
6
2
7
4
6
1
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
:SELECT
Press SMART SURF
repeatedly during TV
viewing to scan through
the channels in the
SURF list.
5
12
1
15
:EXIT
TV INSTALL
Repeat steps 1-7 to add or remove
additional channels to or from the Surf
list.
A/CH BUTTON
MENU
OR
1
3
5
Your remote control has an A/CH
(Alternate Channel) button. Press A/CH
to toggle between the current and previous
channel.
YES
:EXIT
:SELECT
Press the MENU button to show the
onscreen menu.
NO
AIR
YES
AIR
YES
MENU
:EXIT
FINE TUNE
F
ine Tune allows you to adjust the LCD TV
Monitor’s picture reception in areas of
weak signal reception.
1
2
Press the MENU button on the
remote control to see the onscreen
menu.
3
4
5
6
Press the (VOL+) or (VOL-) buttons to enter the TV INSTALL menu.
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
Press the (CH UP) or (CH DN)
buttons to highlight the TV INSTALL
menu.
Press the (CH UP) or (CH DN)
buttons to highlight FINE TUNE.
Press the (VOL+) or (VOL-) buttons to adjust the fine tune setting.
:ADJUST
NO
AIR
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
YES
MENU
2
4 3
5
Press the MENU button repeatedly to
clear the menu from the screen.
3
5
2
4
16
YES
:EXIT
:ADJUST
1
6
NO
AIR
MENU
:EXIT
TV INSTALL
SMART SURF
TUNER MODE
AUTO PROGRAM
STORE
FINE TUNE
:ADJUST
YES
AIR
YES
MENU
:EXIT
TV PICTURE MENU CONTROLS
T
o adjust your LCD Monitor picture, select
a channel and follow these steps.
1
2
3
4
5
6
7
PICTURE
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
NORMAL
Press the MENU button to see the
onscreen menu.
Press the (CH UP) or (CH DN)
buttons to highlight the PICTURE
menu.
:ADJUST
MENU
PICTURE
:EXIT
:ADJUST
2
4
6
1
7
Press the (VOL+) or (VOL-) buttons to enter the PICTURE menu.
Press the (CH UP) or (CH DN)
buttons to choose the item you want to
adjust: Brightness, Color, Contrast, Tint,
Sharpness, Backlight, or Gamma.
3
5
2
4
6
Press the (CH UP) or (CH DN)
buttons to select and adjust other picture controls.
3
5
MENU
:EXIT
PICTURE
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
NORMAL
MENU
:EXIT
PICTURE
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
NORMAL
:ADJUST
MENU
:EXIT
PICTURE
PICTURE
PICTURE
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
NORMAL
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
NORMAL
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
VIVID1
:ADJUST
Brightness: Adjust to brighten the dark
parts of the picture. This appears to add
white to the color.
Color: Adjust to add or reduce color.
Contrast: Adjust to “sharpen” the Picture
quality. The black portions of the picture
become richer in darkness and the white
become brighter.
Tint: Adjust to obtain natural skin tones.
Sharpness: Adjust to improve detail.
Backlight: Adjust the brightness of the picture while preserving the picture’s color.
Gamma: Preset contrast scheme to enhance
picture quality. Choose from NORMAL,
VIVID1, or VIVID2.
:EXIT
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
NORMAL
:ADJUST
Press the MENU button repeatedly to
remove the menu.
HELPFUL HINTS
MENU
PICTURE
:ADJUST
Press the (VOL+) or (VOL-) buttons to adjust the item.
Note: Some items on the picture menu can be
accessed by pressing AUTO on the
remote control.
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
NORMAL
MENU
:EXIT
PICTURE
BRIGHTNESS
COLOR
CONTRAST
TINT
SHARPNESS
BACKLIGHT
GAMMA
VIVID2
:SELECT
MENU
17
:EXIT
:SELECT
MENU
:EXIT
:SELECT
MENU
:EXIT
TV SOUND MENU CONTROLS
T
o adjust your LCD TV Monitor Sound,
select a channel and follow these steps.
SOUND
1
2
3
4
Press the MENU button to see the
menu.
5
6
7
Press the (VOL+) or (VOL-) buttons to adjust the item.
TREBLE
BASS
BALANCE
SOUND MODE
SOUND
TREBLE
BASS
BALANCE
SOUND MODE
MONO
Press the (CH UP) or (CH DN)
buttons to highlight the SOUND menu.
:ADJUST
Press the (VOL+) or (VOL-) buttons to enter the SOUND menu.
Press the (CH UP) or (CH DN)
buttons to choose the item you want to
adjust: Treble, Bass,Balance, or Sound
Mode.
Press the (CH UP) or (CH DN)
buttons to select and adjust other sound
controls.
Press MENU to remove the menu.
Note: You can change the sound from Mono
to Stereo or SAP (if supported by the
program) by pressing the MTS button.
MENU
:EXIT
:ADJUST
2
4
6
1
7
3
5
2
4
6
MONO
3
5
MENU
:EXIT
SOUND
TREBLE
BASS
BALANCE
SOUND MODE
:ADJUST
MONO
MENU
:EXIT
SOUND
TREBLE
BASS
BALANCE
SOUND MODE
:SELECT
MONO
MENU
:EXIT
SOUND
TREBLE
BASS
BALANCE
SOUND MODE
:SELECT
STEREO
MENU
:EXIT
SOUND
TREBLE
BASS
BALANCE
SOUND MODE
HELPFUL HINTS
Treble: Adjust to enhance the high frequency
sounds.
Bass: Adjust to enhance the low frequency
sounds.
Balance: Adjusts the level of sounds coming from the left and right speakers.
Sound Mode: Adjust to select between
Stereo, Mono, or SAP. NOTE: If stereo is
not present on a selected show and the TV
is placed in Stereo mode, the sound coming
from the TV will remain in Mono mode.
:SELECT
18
SAP
MENU
:EXIT
SMART LOCK
T
he Smart Lock feature is an integrated
circuit that receives and processes data
sent by broadcasters, or other program
providers, that contain program content advisories. When programmed by the viewer, a TV
with Smart Lock can respond to the content
advisories and block program content that
may be found objectionable (such as offensive
language, violence, sexual situations, etc.).
This is a great feature to censor the type of
viewing children may watch.
Smart Lock offers various BLOCKING
controls from which to choose:
Access Code - An Access Code must be set
to prevent children from unblocking questionable or censored programming set by their
parents.
Block Enable - After an access code has
been programmed, you can block programming depending on the received rating and
user setting.
Movie Ratings - Certain blocking options
exist which will block programming based on
ratings patterned by the Motion Pictures
Association of America.
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
TV RATING
MOVIE RATING
G
PG
PG-13
R
NC-17
X
TV Y
TV Y7
TV G
TV PG
TV 14
TV MA
U
U
U
U
U
U
MENU
:SELECT
:EXIT
MOVIE RATINGS
G: General Audience - All ages admitted. Most parents would find this program suitable for all ages. This type of
programming contains little or no violence, no strong language, and little or
no sexual dialog or situations.
U
U
U
U
U
U
:SELECT
FV U
VUSULUDU
VUSULUDU
VUSULU
MENU
:EXIT
TV RATINGS
TV-Y All children - Appropriate for all
children. Designed for a very young audience, including children ages 2-6. This
type of programming is not expected to
frighten younger children.
TV-Y7 Directed to Older Children Designed for children age 7 and above. It
PG: Parental Guidance Suggested may be more appropriate for children who
This programming contains material that
can distinguish between make-believe and
parents may find unsuitable for younger
reality. This programming may include
children. It may contain one or more of the mild fantasy and comic violence (FV or
following: moderate violence, some sexual fantasy violence).
situations, infrequent coarse language, or
TV-G General Audience - Most parents
some suggestive dialog.
would find this programming suitable for
PG-13: Parents Strongly Cautioned all ages. This type of programming conThis programming contains material that
tains little or no violence, no strong lanparents may find unsuitable for children
guage, and little or no sexual dialog or situnder the age of 13. It contains one or
uations.
more of the following: violence, sexual
TV-PG Parental Guidance Suggested situations, coarse language, or suggestive Contains material that parents may find
dialog.
unsuitable for younger children. This type
of programming contains one or more of
R: Restricted -This programming is
the following: Moderate violence (V),
specifically designed for adults. Anyone
under the age of 17 should only view this some sexual situations (S), infrequent
programming with an accompanying par- coarse language (L), or some suggestive
dialog (D).
ent or adult guardian. It contains one or
more of the following: intense violence,
TV-14 Parents Strongly Cautioned intense sexual situations, strong coarse
Contains some material that many parents
language, or intensely suggestive dialog.
would find unsuitable for children under
age 14. This type of programming contains
NC-17: No children under the age of 17 one or more of the following: intense viowill be admitted. - This type of program- lence (V), intense sexual situations (S),
ming should be viewed by adults only. It
strong coarse language (L), or intensely
contains graphic violence, explicit sex, or suggestive dialog (D).
crude, indecent language.
TV-MA Mature Audience Only X: Adults Only - This type of programSpecifically designed to be viewed by
ming contains one or more of the follow- adults and may be unsuitable for children
ing: very graphic violence, very graphic
under 17. This type of programming conand explicit or indecent sexual acts, and
tains one or more of the following: graphic
very coarse and intensely suggestive lanviolence (V), explicit sexual situations (S),
or crude, indecent language (L).
guage.
19
SMART LOCK ACCESS CODE
O
ver the next few pages you’ll learn how
to block programs and understand the
rating terms for certain broadcasts. First, set
an access code.
1
2
3
4
5
6
7
8
9
FEATURES
SLEEP TIMER
00 MINS
CLOSED CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
Press the MENU button to see the
onscreen menu.
:SELECT
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURES
menu.
MENU
:EXIT
2
4
1
9
3
5
7 2
4
Press the (CH UP) or (CH DN)
buttons to select SMART LOCK.
Press the (VOL+) or (VOL-) buttons. INPUT USER CODE will
appear on the screen.
Press MENU repeatedly to remove
the menu from the screen.
MENU
:EXIT
USER CODE CHECK
INPUT USER CODE : _ _ _ _
0-9:INPUT
3
5
7
6
8
Use the Number buttons to enter 9,
2, 0, 3. This is the LCD TV
MONITOR’s default code. “----” will
appear on the screen as you enter the
code. This protects its identity.
If INCORRECT appears, repeat steps
5 and 6.
The screen will prompt you to enter a
new code. Enter a new four-digit
code using the Number buttons. The
screen will prompt you to confirm the
code you just entered. Enter your
same new code again. “----” will
appear when you enter your new code,
then the Smart Lock menu will appear.
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
Press the (VOL+) or (VOL-) buttons to enter the FEATURES menu.
The SMART LOCK menu will appear.
Check to see if CHANGE USER
CODE is highlighted, press the
(VOL+) or (VOL-) buttons.
FEATURES
MENU
:EXIT
USER CODE CHECK
INPUT USER CODE : _- _- _- _0-9:INPUT
MENU
:EXIT
USER CODE CHECK
INPUT USER CODE : _ _ _ _
INCORRECT
0-9:INPUT
MENU
:EXIT
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
MENU
:EXIT
SMART LOCK
USER CODE CHECK
BLOCK ENABLE
MOVIE RATING
TV RATING
CHANGE CODE
INPUT USER CODE : _ _ _ _
0-9:INPUT
MENU
NO
INPUT NEW CODE : _ _ _ _
0-9:INPUT
:EXIT
:SELECT
MENU
:EXIT
SMART LOCK
USER CODE CHECK
CONFIRM NEW CODE : _ _ _ _
0-9:INPUT
MENU
:EXIT
To change the Access Code later, follow
steps 1-6 so the Smart Lock menu appears.
HELPFUL HINTS
You cannot unblock a channel without knowing your code or changing it. If your code
changes, someone has altered it and possibly
viewed blocked channels.
If you forget your access code, you must
reset the Factory Settings, details on page 27.
20
BLOCK ENABLE
MOVIE RATING
TV RATING
CHANGE CODE
:SELECT
USER CODE CHECK
YES
MENU
:EXIT
MENU
:EXIT
SMART LOCK- BLOCK ENABLE
A
fter your personal access code has been
set (see the previous page), you are ready
to select the channels or inputs you want to
block out or censor.
1
2
Press the MENU button to see the
onscreen menu.
3
4
5
6
7
8
9
Press the (VOL+) or (VOL-) buttons to enter the FEATURES menu.
FEATURES
SLEEP TIMER
00 MINS
CLOSED CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURES
menu.
Press the (CH UP) or (CH DN)
buttons to select SMART LOCK.
Press the (VOL+) or (VOL-) buttons INPUT USER CODE will appear.
Use the Number buttons to enter
your access code.
Press the (CH UP) or (CH DN)
buttons to select BLOCK ENABLE.
Press the (VOL+) button to block a
certain channel or (VOL-) button to
unblock a channel.
Press MENU repeatedly to remove
the menu from the screen.
:SELECT
MENU
FEATURES
SLEEP TIMER
00 MINS
CLOSED CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:EXIT
MENU
:SELECT
1
9
8
2
4
7
6
2
4
3
5
8
:EXIT
USER CODE CHECK
INPUT USER CODE : _ _ _ _
0-9:INPUT
MENU
:EXIT
SMART LOCK
BLOCK ENABLE
MOVIE RATING
TV RATING
CHANGE CODE
:SELECT
NO
MENU
:EXIT
SMART LOCK
BLOCK ENABLE
MOVIE RATING
TV RATING
CHANGE CODE
:SELECT
NOTE: Repeat the steps above to block
additional channels.
HELPFUL HINT
If you enter your Access Code to view a
blocked channel, ALL blocked channels
will be viewable until you turn off the TV.
Channels will be blocked as before when
you turn on the TV again.
When you set one of the ratings (Movie or
TV) to ON, Block Enable will automatically turned on. If you change the setting to
OFF or when no rating is set, Block Enable
will be turned off.
21
YES
MENU
:EXIT
SMART LOCK - MOVIE RATINGS
T
he Smart Lock feature can block programming based on the Movie Industry
ratings.
Once you’ve entered your access code and
the Smart Lock features are displayed on the
screen:
1
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
Press the MENU button to see the
onscreen menu.
:SELECT
2
3
4
5
6
7
8
9
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURES
menu.
Press the (VOL+) or (VOL-) buttons to enter the FEATURES menu.
Press the (CH UP) or (CH DN)
buttons to select SMART LOCK.
Press the (VOL+) or (VOL-) buttons INPUT USER CODE will appear.
Use the Number buttons to enter
your access code.
Press the the (CH UP) or (CH
DN) buttons to select MOVIE RATING.
Press the (VOL+) or (VOL-) buttons to highlight any of the Movie
Rating options. When highlighted, all
these options can be (B) blocked or (U)
unblocked.
Press MENU repeatedly to remove
the menu from the screen.
MENU
:EXIT
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
MENU
:SELECT
2
4
7
1
9
3
5
8
2
4
7
USER CODE CHECK
INPUT USER CODE : _ _ _ _
0-9:INPUT
3
5
8
6
MENU
SMART LOCK
BLOCK ENABLE
MOVIE RATING
TV RATING
CHANGE CODE
YES
MENU
:EXIT
MENU
:EXIT
MENU
:EXIT
:SELECT
MOVIE RATING
G
PG
PG-13
R
NC-17
X
U
U
U
U
U
U
:SELECT
NOTE: When a rating is chosen to be
blocked, any higher level rating will also be
blocked from viewing. (i.e.: If “R” is selected
to be blocked, NC-17 and X will automatically be blocked.) Also, when a rating is set to
unblock, any rating lower will be automatically set to unblock. (i.e: if PG-13 is blocked,
PG and G will automatically be unblocked.)
:EXIT
MOVIE RATING
G
PG
PG-13
R
NC-17
X
:SELECT
22
U
U
U
B
B
B
:EXIT
SMART LOCK - TV RATINGS
he Smart Lock feature can block programTming
based on the TV Industry ratings.
Once you’ve entered your access code and the
Smart Lock features are displayed on the screen:
1
2
3
4
5
6
7
8
Press the MENU button to see the
onscreen menu.
9
Press MENU repeatedly to remove the
menu from the screen.
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURES
menu.
:SELECT
Press the (VOL+) or (VOL-) buttons buttons, INPUT USER CODE
will appear on the screen.
Use the Number buttons to enter
your access code.
Press the (CH UP) or (CH DN)
buttons to select TV RATING.
Press the the (VOL+) or (VOL-)
buttons to highlight any of the TV
Rating options. When highlighted, all
these options can be (B) blocked or (U)
unblocked.
SLEEP TIMER
00 MINS
CLOSED CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:EXIT
MENU
:SELECT
Press the (VOL+) or (VOL-) buttons to enter the FEATURES menu.
Press the (CH UP) or (CH DN)
buttons to highlight Smart Lock.
MENU
FEATURES
2
4
7
1
9
3
5
8
2
4
7
USER CODE CHECK
INPUT USER CODE : _ _ _ _
0-9:INPUT
3
5
8
6
MENU
:EXIT
SMART LOCK
BLOCK ENABLE
MOVIE RATING
TV RATING
CHANGE CODE
YES
MENU
:SELECT
:EXIT
TV RATING
TV Y
TV Y7
TV G
TV PG
TV 14
TV MA
U
U
U
U
U
U
FV U
VUSULUDU
VUSULUDU
VUSULU
MENU
:SELECT
:EXIT
TV RATING
TV Y
TV Y7
TV G
TV PG
TV 14
TV MA
U
U
U
B
B
B
:SELECT
23
:EXIT
FV U
VBSBLBDB
VBSBLBDB
VBSBLB
MENU
:EXIT
SLEEPTIMER
Y
our TV can be set to automatically turn
itself off at a given amount of time.
1
2
Press the SLEEP button on the remote
control and the SLEEP timer display will
appear on the screen.
SLEEP TIMER
SLEEP TIMER
00 MINS
SLEEP TIMER
SLEEP TIMER
Press the SLEEP button repeatedly to
pick the amount of time (30, 60, 90, or
120 minutes) before the TV will turn
itself off.
NOTE: An onscreen count down will appear
during the last minute before the TV shuts
itself off. If any button is pressed during the
last minute of the countdown , the Sleeptimer
setting will be cancelled.
30 MINS
SLEEP TIMER
1
SLEEP TIMER
60 MINS
SLEEP TIMER
SLEEP TIMER
90 MINS
SLEEP TIMER
SLEEP TIMER
HELPFUL HINT
To see how many minutes remain before the
TV shuts itself off, press the MENU button.
A Sleep Timer setting can be cancelled by
pressing any button during the last minute
of the operation.
24
120 MINS
CLOSED CAPTIONS
C
losed Captioning (CC) allows you to
read the voice content of television programs on the TV screen. Designed to help the
hearing impaired, this feature uses onscreen
“text boxes” to show dialogue and conversations while the TV program is in progress.
1
2
3
4
5
Press the MENU buttons to see the
onscreen menu.
6
Press MENU repeatedly to remove the
menu from the screen.
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
MENU
:EXIT
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURES
menu.
Press the (VOL+) or (VOL-) buttons to enter the FEATURES menu.
Press the (CH UP) or (CH DN)
buttons to select CLOSE CAPTION.
Press the (VOL+) or (VOL-) buttons to select the closed caption you
want: NONE, CC1, CC2, Txt1, or
Txt2.
MENU
:EXIT
FEATURES
1
6
3
5
2
4
2
4
3
5
SLEEP TIMER
00 MINS
CLOSE CAPTION CC1
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
MENU
:EXIT
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION CC2
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
MENU
:EXIT
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION Txt1
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
MENU
:EXIT
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION Txt2
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
HELPFUL HINT
Not all TV programs and product commercials are broadcast with Closed Captioning
(CC). Nor are all Closed Captioning
MODES (CAPTION 1–2 or TEXT 1–2)
necessarily being used by broadcast stations
during the transmission of a program offering Closed Captioning. Refer to your area’s
TV program listings for the stations and
times of shows being broadcast with Closed
Captioning.
:SELECT
25
MENU
:EXIT
FREEZE
H
ave you ever wished you could freeze the
picture on the television broadcast to
write down telephone number or an address?
Your new LCD TV Monitor will allow you to
do just that.
1
2
3
4
5
6
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
OFF
LANGUAGE
ENGLISH
FACTORY SETTINGS
Press the MENU button on the
remote control to see the onscreen
menu.
:SELECT
MENU
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
OFF
LANGUAGE
ENGLISH
FACTORY SETTINGS
:EXIT
:SELECT
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURES
menu.
Press the the (VOL+) or (VOL-)
buttons to enter the FEATURES
menu.
Press the (CH UP) or (CH DN)
buttons to highlight FREEZE.
Press the the (VOL+) or (VOL-)
buttons to turn FREEZE ON or OFF.
Press the MENU button repeatedly to
clear the menu from the screen.
NOTE: If the picture has been frozen, follow
these steps again to turn it OFF.
MENU
:EXIT
OR
FEATURES
1
6
3
5
2
4
2
4
3
5
HELPFUL HINT
After freezing a picture on the screen, when
the FREEZE control is turned OFF, the normal signal programming will be shown at
present time. The signal that was being
shown while the picture was frozen will not
be viewable.
For the FREEZE feature to be most useful,
always return to the TV INSTALL menu,
highlight FREEZE, then exit the menu. If
you have done this, when you see a telephone number or an address that you want
to write down, just press the MENU and the
VOL+ or VOL- twice to turn FREEZE ON.
26
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
ON
LANGUAGE
ENGLISH
FACTORY SETTINGS
:SELECT
MENU
:EXIT
LANGUAGE SETTINGS
F
or English or Spanish-speaking TV owners, an onscreen LANGUAGE option is
present. The LANGUAGE control enables
you to set the TV’s onscreen menu to be
shown in either English or Spanish.
1
2
3
4
5
6
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
Press the MENU button on the
remote control to see the onscreen
menu.
:SELECT
MENU
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:EXIT
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURES
menu.
Press the the (VOL+) or (VOL-)
buttons to enter the FEATURES
menu.
Press the (CH UP) or (CH DN)
buttons to highlight LANGUAGE.
Press the the (VOL+) or (VOL-)
buttons to select English or Spanish.
Press the MENU button repeatedly to
clear the menu from the screen.
:SELECT
MENU
:EXIT
FEATURES
1
6
3
5
2
4
2
4
3
5
HELPFUL HINT
Remember, the LANGUAGE control makes
only the TV’s onscreen MENU items appear
in English or Spanish text. It does not
change the other onscreen text features,
such as Closed Captioning (CC), with TV
shows.
27
Sleeptimer
Closed Caption
Smart Lock
Heladia
Idioma
Poner de Fabrica
:Selecto
00 MINS
NONE
Espanol
MENU
:EXIT
FACTORY SETTINGS
Y
our TV can be reset to the factory settings
in case you forget your Smart Lock password, or want to change the picture, sound,
or features settings.
FEATURES
1
2
3
4
5
6
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
Press the MENU button on the
remote control to see the onscreen
menu.
Press the the (CH UP) or (CH
DN) buttons to highlight the FEATURES menu.
:SELECT
MENU
FEATURES
SLEEP TIMER
00 MINS
CLOSE CAPTION NONE
SMART LOCK
FREEZE
LANGUAGE
ENGLISH
FACTORY SETTINGS
:EXIT
MENU
:SELECT
:EXIT
Press the (VOL+) or (VOL-) buttons to enter the FEATURES menu.
Press the (CH UP) or (CH DN)
buttons to highlight the FACTORY
SETTINGS control.
Press the the (VOL+) or (VOL-)
buttons to reset the TV to the original
factory settings.
Press the MENU button repeatedly to
clear the menu from the screen.
NOTE: If you reset the TV to the factory settings, you must make any changes that you
had previously made to TV INSTALL, PICTURE, SOUND, AND FEATURES.
FACTORY SETTINGS
1
6
3
5
2
4
2
4
3
5
28
PRESS
RECALL ALL SETTINGS...
:SELECT
MENU
:EXIT
PC PICTURE CONTROLS
his TV can also be used as a PC Monitor. A
T
PC video signal must be present or the TV will
go into standby mode. The Picture controls
allow you to adjust the picture.
1
2
3
4
5
PICTURE
Press the MENU button on the
remote control to see the onscreen
menu.
Press the (CH UP) or (CH DN)
buttons to highlight the PICTURE
menu.
AUTO
PLEASE WAIT...
MENU
:SELECT
MENU
:EXIT
:EXIT
Press the (VOL+) or (VOL-) buttons to enter the PICTURE menu.
Press the (CH UP) or (CH DN)
buttons to highlight the item that you
would like to adjust.
Press the (VOL+) or (VOL-) buttons to adjust the item.
NOTE: To adjust other items repeat steps 4
and 5.
6
AUTO CONTRAST
CONTRAST
BRIGHTNESS
BACKLIGHT
Press MENU repeatedly to remove
the menu from the screen.
PICTURE
1
6
3
5
2
4
2
4
AUTO CONTRAST
CONTRAST
BRIGHTNESS
BACKLIGHT
:ADJUST
3
5
MENU
:EXIT
MENU
:EXIT
MENU
:EXIT
PICTURE
AUTO CONTRAST
CONTRAST
BRIGHTNESS
BACKLIGHT
:ADJUST
PICTURE
AUTO CONTRAST
CONTRAST
BRIGHTNESS
BACKLIGHT
:ADJUST
HELPFUL HINTS
Auto Contrast: The LCD Monitor will automatically adjust picture for best contrast.
Contrast: Adjust to “sharpen” the Picture
quality. The black portions of the picture
become richer in darkness and the white
become brighter.
Brightness: Adjust to brighten the darkest
parts of the picture.
Backlight: Adjust the brightness of the picture while preserving the picture’s color.
29
PC IMAGE ADJUSTMENT CONTROLS
his TV can also be used as a PC Monitor. A
T
PC video signal must be present or the TV will
go into standby mode. The Image Adjust controls allow you to adjust the image as it appears
on the screen.
1
2
3
4
5
AUTO ADJUST
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
Press the MENU button on the
remote control to see the onscreen
menu.
AUTO
PLEASE WAIT...
MENU
Press the the (CH UP) or (CH
DN) buttons highlight the IMAGE
ADJUST menu.
Press the the (VOL+) or (VOL-)
buttons to enter the IMAGE ADJUST
menu.
Press the (CH UP) or (CH DN)
buttons to highlight the item that you
would like to adjust.
Press the the (VOL+) or (VOL-)
buttons to adjust the item.
NOTE: To adjust other items repeat
steps 4 and 5.
6
IMAGE ADJUST
Press MENU repeatedly to remove
the menu from the screen.
:SELECT
MENU
:EXIT
:EXIT
1
6
3
5
2
4
2
4
3
5
IMAGE ADJUST
AUTO ADJUST
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
: ADJUST
MENU
:EXIT
MENU
:EXIT
MENU
:EXIT
MENU
:EXIT
IMAGE ADJUST
AUTO ADJUST
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
: ADJUST
IMAGE ADJUST
AUTO ADJUST
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
: ADJUST
HELPFUL HINTS
Auto Adjust: The LCD Monitor will automatically adjust to the best image position,
phase, and clock settings.
Horizontal: Adjusts the horizontal position
of the picture.
Vertical: Adjusts the vertical position of
the picture.
Clock: Adjusts the color when patterns
appear.
Phase: Adjusts the picture to remove the
noise or fuzziness.
Sharpness: Adjust to improve detail.
IMAGE ADJUST
IMAGE ADJUST
AUTO ADJUST
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
AUTO ADJUST
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
: ADJUST
30
MENU
:EXIT
: ADJUST
PC SOUND CONTROLS
T
his TV can also be used as a PC Monitor. A
PC video signal must be present or the TV
will go into standby mode. The Sound controls
allow you to adjust the sound.
1
2
3
4
5
Press the (CH UP) or (CH DN)
buttons to shift the menu to the right
to enter the SOUND menu.
Press the (VOL+) or (VOL-) buttons to shift the menu to the right to
enter the SOUND menu.
Press the (CH UP) or (CH DN)
buttons to highlight the item that you
would like to adjust.
Press the (VOL+) or (VOL-) buttons to adjust the item.
Press MENU repeatedly to remove
the menu from the screen.
SOUND
TREBLE
BASS
BALANCE
Press the MENU button on the
remote control to show the onscreen
menu.
NOTE: To adjust other items repeat
steps 4 and 5.
6
SOUND
:ADJUST
TREBLE
BASS
BALANCE
MENU
:EXIT
:ADJUST
MENU
:EXIT
MENU
:EXIT
SOUND
1
6
3
5
2
4
2
4
3
5
HELPFUL HINTS
Treble: Adjust to enhance the high frequency
sounds.
Bass: Adjust to enhance the low frequency
sounds.
Balance: Adjusts the level of sounds coming from the left and right speakers.
31
TREBLE
BASS
BALANCE
:ADJUST
PC COLOR CONTROLS
his TV can also be used as a PC Monitor. A
T
PC video signal must be present or the TV will
go into standby mode. The Color controls allow
you to adjust the color.
1
2
3
4
5
Press the (CH UP) or (CH DN)
buttons to highlight the COLOR
menu.
Press the (VOL+) or (VOL-) buttons to enter the COLOR menu.
Press the (CH UP) or (CH DN)
buttons to highlight the item that you
would like to adjust.
Press the (VOL+) or (VOL-) buttons to adjust the item.
Press MENU repeatedly to remove
the menu from the screen.
COLOR
COLOR TEMP
RED
GREEN
BLUE
Press the MENU button on the
remote control to see the onscreen
menu.
NOTE: To adjust other items repeat steps 4
and 5.
6
COLOR
USER
:SELECT
MENU
COLOR TEMP
RED
GREEN
BLUE
:SELECT
:EXIT
NORMAL
MENU
:EXIT
COLOR
1
6
3
5
2
4
2
4
3
5
COLOR TEMP
RED
GREEN
BLUE
:SELECT
WARM
MENU
:EXIT
COLOR
COLOR TEMP
RED
GREEN
BLUE
:SELECT
COOL
MENU
:EXIT
COLOR
COLOR TEMP
RED
GREEN
BLUE
:ADJUST
COLOR
COLOR TEMP
RED
GREEN
BLUE
HELPFUL HINTS
:ADJUST
Color Temp: Choose from Normal, Warm,
Cool, or User preferences.
Red: Adjusts the red color of the picture.
Green: Adjusts the green color of the picture.
Blue: Adjusts the blue color of the picture.
32
USER
MENU
:EXIT
COLOR
USER
MENU
:EXIT
COLOR TEMP
RED
GREEN
BLUE
:ADJUST
USER
MENU
:EXIT
PC FEATURES MENU
his TV can also be used as a PC Monitor. A
T
PC video signal must be present or the TV will
go into standby mode. The Feature controls
allow you to adjust the picture.
1
2
3
4
5
FEATURES
INFORMATION
OSD SETTING
LANGUAGE
ENGLISH
RESOLUTION NOTICE ON
DPMS
ON
MODE MESSAGE
ON
FACTORY SETTINGS
Press the MENU button to see the
onscreen menu.
Press the (CH UP) or (CH DN)
buttons to highlight the FEATURE
menu.
:SUBMENU
MODE : PRESET 15
1024X768
H : + 60.02 KHZ
V : + 75
HZ
:EXIT
MENU
Press the (VOL+) or (VOL-) buttons to enter the FEATURE menu.
:EXIT
FEATURES
1
6
3
5
2
4
Press the (CH UP) or (CH DN)
buttons to highlight the item that you
would like to adjust.
Press the (VOL+) or (VOL-) buttons to adjust the item.
NOTE: To adjust other items repeat steps 4
and 5.
6
MENU
INFORMATION
Press MENU repeatedly to remove
the menu from the screen.
2
4
3
5
INFORMATION
OSD SETTING
LANGUAGE
ENGLISH
RESOLUTION NOTICE ON
DPMS
ON
MODE MESSAGE
ON
FACTORY SETTINGS
:SUBMENU
MENU
:EXIT
OSD SETTING
POSITION
OSD TIMER
10 MINS
BACKGROUND
:ADJUST
MENU
:EXIT
OSD SETTING
POSITION
OSD TIMER
10 MINS
BACKGROUND
:SELECT
HELPFUL HINTS
Information: Shows the current PC resolution timing with refresh rate.
OSD Setting: Allows you to adjust the
position of the picture, the OSD timer, and
the background shading.
Language: Allows you to choose an
English or Spanish OSD.
Resolution Notice: Shows the current PC
resolution timing.
DPMS: (Display Power Management
Signaling) When ON, this make the screen
black when there is no signal present, or the
screen saver has timed out.
Mode Message: When ON, it shows the
LCD Monitor’s mode. When OFF, it will
only show Video and Cable/Air.
Factory Settings: Reverts all picture,
sound, color, and feature settings to the
original factory settings.
MENU
:EXIT
OSD SETTING
FEATURES
FEATURES
POSITION
OSD TIMER
BACKGROUND
INFORMATION
OSD SETTING
LANGUAGE
ENGLISH
RESOLUTION NOTICE ON
DPMS
ON
MODE MESSAGE
ON
FACTORY SETTINGS
INFORMATION
OSD SETTING
LANGUAGE
ENGLISH
RESOLUTION NOTICE ON
DPMS
ON
MODE MESSAGE
ON
FACTORY SETTINGS
10 MINS
MENU
:ADJUST
:EXIT
:SELECT
MENU
:EXIT
:SELECT
MENU
:EXIT
FEATURES
FEATURES
FEATURES
INFORMATION
OSD SETTING
LANGUAGE
ENGLISH
RESOLUTION NOTICE ON
DPMS
ON
MODE MESSAGE
ON
FACTORY SETTINGS
INFORMATION
OSD SETTING
LANGUAGE
ENGLISH
RESOLUTION NOTICE ON
DPMS
ON
MODE MESSAGE
ON
FACTORY SETTINGS
INFORMATION
OSD SETTING
LANGUAGE
ENGLISH
RESOLUTION NOTICE ON
DPMS
ON
MODE MESSAGE
ON
FACTORY SETTINGS
MENU
:SELECT
:EXIT
FACTORY SETTINGS
PRESS
TO
RECALL ALL SETTINGS...
:SELECT
MENU
:EXIT
33
:SELECT
MENU
:EXIT
:SELECT
MENU
:EXIT
SETTING
UP THE
PC MODE (PERSONAL COMPUTER MONITOR)
No.
Resolution
Refresh
Rate
Vertical
Sync
Horizontal
Sync
Horizontal
Polarity
Pixel
Frequency
1
640 x 480
60 Hz
N
31,500 kHz
N
25,175 MHz
2
67 Hz
N
35,000 kHz
N
30,240 MHz
3
72 Hz
N
37,900 kHz
N
31,500 MHz
4
75 Hz
N
37,500 kHz
N
31,500 MH
5
85 Hz
N
43,300 kHz
N
36,000 MHz
6
720 x 400
70 Hz
P
31,469 kHz
N
28,322 MHz
7
800 x 600
56 Hz
P
35,100 kHz
P
36,000 MHz
8
60 Hz
P
37,900 kHz
P
40,000 MHz
9
72 Hz
P
48,100 kHz
P
50,000 MHz
10
75 Hz
P
46,900 kHz
P
49,500 MHz
11
85 Hz
P
53,700 kHz
P
56,250 MHz
12
832 x 624
75 Hz
P
49,700 kHz
P
57,300 MHz
13
1024 x 768
60 Hz
N
48,400 kHz
N
65,000 MHz
14
70 Hz
N
56,500 kHz
N
75,000 MHz
15
75 Hz
P
60,000 kHz
P
78,750 MHz
16
85 Hz
P
68,700 kHz
P
94,500 MHz
17
1152 x 864
75 Hz
P
67,500 kHz
P
108,000 MHz
18
1280 x 960
60 Hz
P
60,000 kHz
P
108,000 MHz
19
1280 x 1024
60 Hz
P
64,000 kHz
P
108,000 MHz
75 Hz
P
80,000 kHz
P
135,000 MHz
20
34
TROUBLESHOOTING TIPS
No Power
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then reinsert the plug
into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
No Picture
• Check the antenna or Cable TV connections. Connect the antenna or Cable TV signal securely to the TV’s 75Ω jack
on the rear of the TV.
• Set TUNER MODE correctly. Details are on page 12.
• Activate AUTO PROGRAM to find all available channels. Details are on page 13.
No Sound
• Press the VOL+ and VOL- buttons to adjust the volume.
• Press the MUTE button on the remote control to cancel or restore the volume.
• If you have connected other equipment to the TV (such as a VCR or DVD Player), make sure the audio cables are
connected securely between the TV and the other equipment.
• Check the SOUND settings. Details are on page 18 or 30.
Remote Control does not work.
• Check the batteries. If necessary, replace them with two AAA heavy duty (zinc chloride) or alkaline batteries.
• Clean the remote control as well as the remote control sensor on the front of the TV.
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then reinsert the plug
into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
• Always point the remote control toward the front of the TV (toward the remote sensor).
TV displays wrong channel or no channels.
• Repeat channel selection.
• Add the channel number(s) into the TV’s memory. Use STORE. Details are on page 14.
• Make sure TUNER MODE is set correctly. Details are on page 11. Then activate AUTO PROGRAM to set up all
available channels. Details are on page 12.
35
CARE AND CLEANING
WARNING concerning stationary images on the TV
screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the picture tube.
Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not leave nonmoving images on screen for extended periods of time. Do not display the same images too frequently; if you do, subtle “ghost” images
can be left on the picture tube. Sources of stationary images may be Laser discs, video games, Compact Discs Interactive (CD-i),
or paused Digital Video Discs (DVDs) or videotapes.
Here are some common examples of stationary images:
• DVD menus list DVD content.
• Letterbox black bars appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed on a TV with
standard (4:3) aspect ratio. This is available with some DVDs.
• Video game images and scoreboards
• Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are less likely to
damage the picture tube.
• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.
• Shopping channel logos, pricing displays may be bright and may appear constantly during the show. These are usually in the
same location on the TV screen.
TV Location
• To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV where temperatures can become excessively hot (for example, in direct sunlight or near a heating appliance).
• Allow a free flow of air around the TV.
Cleaning
• To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, non-scratching duster.
• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water. Use even, easy, vertical strokes
when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or a sponge dampened in a solution of cool, clear water and a mild soap or
detergent. Use a clean, dry cloth to dry the wiped surfaces.
• Occasionally vacuum the vents on the rear of the TV.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may blemish the cabinet permanently.
36
INDEX
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Audio In jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Auto Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Tuner Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
TV Operation (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 31
Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 31
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 29
Video In jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Unrated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Channel Edit (Store) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 32
Color Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Factory Service Information . . . . . . . . . . . . . . . . . . . . . . . .39-40
Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 33
Fine Tune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 33
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
PC (Monitor) Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remote Control Operation (Basic) . . . . . . . . . . . . . . . . . . . . . .5
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 30
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
SmartLock
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Block Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Movie Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19, 22
TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19, 23
Smart Surf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 31
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
S-Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Tint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 30
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 31
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
37
FACTORY SERVICE LOCATIONS
NOTE: Magnavox has chosen Philips Factory Service as its preferred, authorized servicer. Please contact a Philips Factory Service
Center. If you reside in one of our Philips Factory Service Branch areas, you can contact the nearest Service Branch to obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No
Charge Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste
ci-dessous), vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après
vente rapide et efficace. Si le produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans
frais. Pour les produits non couverts par la garantie, contactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud.
puede comunicarse con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su
producto está todavía bajo garantía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio.
Para servicio después del vencimiento de la garantía, llame al lugar más cercano de los abajo indicados.
In Canada
To obtain efficient and expedient carry-in, mail-in, or in-home service for your product, please contact Magnavox at:
1-800-661-6162 (French speaking)
1-800-705-2000 (English or Spanish speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile, veuillez contacter Magnavox á:
1-800-661-6162 (Francophone)
1-800-705-2000 (Anglais ou Espagnol)
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo, favor de comunicarse con Magnavox al:
1-800-661-6162 (francófono)
1-800-705-2000 (Inglés o Español))
38
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE
CENTER NEAR YOU. MAGNAVOX HAS CHOSEN PHILIPS FACTORY SERVICE AS ITS PREFERRED, AUTHORIZED SERVICER.
YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF
MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÉS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, Á DOMICILE, OU EN SE PRÉSENTANT Á UN CENTRE
DE SERVICE PHILIPS. PLUS DE 600 CENTRES DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE
AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS DANS UN RAYON DE 50 À 75 MILES
(80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNOY EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAV´S DE UN CENTRO
PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO DE UN RADIO DE 80 A 120 KM
(50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
ATLANTA
Philips Factory Service
550 Franklin Road., Suite F
Marietta, GA 30067
800-273-1501
CLEVELAND
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037
CHICAGO
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
TAMPA
Philips Factory Service
1911 US Highway 301 North, Suite 100
Tampa, FL 33619
800-442-2027
DETROIT
Philips Factory Service
25173 Dequindre
Madison Heights, MI 48071
800-438-1398
SAN FRANCISCO
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
DALLAS
Philips Factory Service
415 N. Main Street, #107
Euless,TX 76040
800-952-3254
KNOXVILLE
Philips Factory Service
One Philips Drive
Building 2
Knoxville,TN 37914
800-821-1767
HOUSTON
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston,TX 77055
800-952-3254
LOS ANGELES
Philips Factory Service
20930 Bonita, Ste.V
Carson, CA 90746
800-300-9013
39
PHILADELPHIA
Philips Factory Service
354 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
LIMITED WARRANTY
LCD TV MONITOR
90 Days Free Labor
One Year Parts Exchange
This product must be carried in for service.
WHO IS COVERED?
MAKE SURE YOU KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby. Also
keep the original box and packing material in case you need to return
your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For 90 days
thereafter,all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. After one
year from the day of purchase, you pay for the replacement or repair
of all parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
BEFORE REQUESTING SERVICE...
WHAT IS EXCLUDED?
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long
an implied warranty may last, this limitation may not apply to you.)
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
TO GET WARRANTY SERVICE IN U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact a Magnavox factory service center (see enclosed list) or
authorized service center to arrange repair.
Your warranty does not cover:
• labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
• product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of
Magnavox.
• reception problems caused by signal conditions or cable or antenna
systems outside the unit.
• a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
• incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)
• a product used for commercial or institutional purposes.
WHERE IS SERVICE AVAILABLE?
TO GET WARRANTY SERVICE IN CANADA...
Please contact Magnavox at:
1-800-705-2000
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Magnavox
is not liable under any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)
REMEMBER...
Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL # ________________________________________________
Warranty service is available in all countries where the product is officially distributed by Magnavox. In countries where Magnavox does not
distribute the product, the local Magnavox service organization will
attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
SERIAL #
________________________________________________
This warranty gives you specificlegalrights.You may have other rights which varyfrom state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6541E002
Printed in China
40
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement