Gateman V100
Series
ISL-1226-10 Rev.0
Printed in Korea
※ The functions and design of this product can be changed without prior notice for quality improvement.
INTRO
Thank you for choosing a GATEMAN product.
CONTENTS
Getting Started
We welcome you to this new door solution world of GATEMAN that is the leading brand in
the world digital door lock industry.
Please find comfort and security in yourself through perfectly combined digital and analog
Safety Cautions
4
Product Features
5
Simplified Directions
6
Directions
8
Directions
technologies presented by GATEMAN.
Components Overview•Identification
How to Use
This user manual enables you to operate the product more convenient and safer.
10
Password
Be sure to read this completely before using it.
Card Key
Lock Door
Open Door from Inside
Settings
14
Safe Handle Feature
Volume Setting Feature
Forced Lock
Auto / Manual Feature
Safety Feature
17
Alarm Feature
3-minute Lock Feature
Open Door with fake password
Extra Features
Option
20
Remote Control Module
Remote Control
Emergency Power
22
Emergency Power Supply for
Discharged Batteries
Product Specification
2
23
3
Must Read This!!!
Do not install the unit in outdoor
environment.
Product Features
Please read this carefully for your own safety.
Be careful not to let
unauthorized user know
your Password.
Do not spray water directly to the
product or wipe it with chemical
substances such as benzene,
thinner, or alcohol when cleaning
the product.
1⃞ SHM(Safe Handle Mechanism) Technology
Getting Started
Safety Cautions
SHM(Safe Handle Mechanism) Technology that makes it impossible to open the Doorlock to
trespass a house by drilling a hole on the entrance or through a pet door has been applied.
2⃞ Palm Touch Feature
Do not use force with a tool onto
the product.
Please keep your password
safely.
Make sure to lock the door
tight when you go out.
To prevent the password from being exposed due to residual fingerprints after opening a door,
a new technology has been adopted to complete the door opening process by touching the
keypad with a palm after entering the password.
3⃞ Smart Pad Feature
A separate lighting method where each keypad number has been separately designed is
applied so that users may examine intuitively how the selected function is operated and
if they are run normally.
Be careful not to hit the handle
as it may cause injuries.
Keep foreign materials away from
the fingerprint sensor to maintain
it cleanly and do not use it with
wet fingers.
4⃞ Remote Control (Option)
You may use a remote control by installing the Remote control Module.
Caution
4
Make sure to follow the above instructions to avoid any injuries or damages on the properties .
5
Simplified Directions
1⃞ Register Password
➞
➞
Press
button
Enter password
(4 to 12 digits)
(Registration)
Press
button
(Registration)
Press
button
(Registration)
2⃞ Register Cardkey
➞
Press
button
(Registration)
3⃞ Lock Door from Outside
➞
Contact all the keys
you wish to register
on one by one
Directions
Directions
4⃞ Open Door from Outside
8
Components Overview•Identification
① If you close a door in Auto Lock status,
it will be closed within 5 seconds by the
automatic lock sensor.
② In Manual Lock status, touch the keypad
in the front body (Front Body) gently with
your palm to lock a door.
5⃞ Lock/Open Door from Inside
① Turn the manual open/close
device. The deadbolt will be
thrown or be retracted in turn.
② If Auto Lock is set, a door will
automatically be closed once
closed.
③ Press the Safe Handle button
and lower the handle to open
a door.
6
① Put a registered card key on the reader
② Touch the keypad in the front body
gently with your palm to press the registered
password. And then, press the keypad
again gently with your palm or press button
to end.
Be the Auto/Manual Lock Setting
button pressed in the back body to
set Manual
10
Password
Card Key
Lock Door
Open Door from Inside
Settings
6⃞ Set Auto/ Manual Mode
Be the Auto/Manual Lock Setting
button released in the back body to
set Auto
How to Use
14
Safe Handle Feature
Auto Set
Volume Setting Feature
Forced Lock
Auto / Manual Feature
Manual Set
Safety Feature
Alarm Feature
3-minute Lock Feature
Open Door with fake password
17
Identification
Basic Contents
Front
(Front Body, install on the outside of the door)
The contents of this product may be subject to change without notice for performance or quality improvement.
Pull down Emergency Cover
》 Basic Contents
❶
❻
❷
❼
❹
Back (Main Body)
Installation Template
Lock case
❸
❶
Keypad (10-Key)
❷
Dead Bolt Jam Lamp
❸
Lever
❹
Battery Change Lamp
❺
Card Key Reader
❻
Emergency Power Supply
Terminal
❼
Reset button
❽
Emergency Cover
❽
❺
Front (Front Body)
Directions
Components Overview
9V Emergency battery
(Optional)
Back
(Back Body, install on the inside of the door)
4 Card Keys
4 Batteries
Screws
❶
Battery Cover
❷
Slot for Remote control
module(Option)
❶
❸
Strike Plate
❽
Users Guide
》 Option
❷
❾
❸
❿
❹
❺
❻
•Remote control
•Remote control module
❼
Registration button
❹
Battery Change Lamp
❺
Forced Lock Switch
❻
Manual thumb turn
❼
Lever
❽
1.5V AA Alkaline Batteries
❾
Auto / Manual Lock button
❿
Volume Control Switch
Lock case
Automatic Locking Sensor
Dead Bolt
Latch Bolt
Safe handle button
8
9
To Use Password
How to Use
》 To Register Password
Order
1⃞ Press
button
To Use Cardkey
Passwords should be selected from 4 to 12 digits. [*] and [#] are not allowed.
Play
(Registration)
》 To Register Cardkey
Description
Open the battery cover in the back body and
press Ⓘ (Registration) button once.
Order
1⃞ Press
button
2⃞
2⃞ Enter the password
Enter the password you wish to register. (4 to 12 digits)
3⃞ Press
button
Press the Ⓘ (Registration) button in the back body again to
complete the password registration.
(Registration)
》 To Open Door with Password
Order
Play
If you hear a“pik”sound, the card keys are registered.
If you hear a“ti-to-ti-to”sound, the card key had been
already registered.
Contact all the card keys
you wish to register on the
[card key reader] one by one
3⃞ Press
button
Description
Open the battery cover in the back body and
press Ⓘ (Registration) button once.
(Registration)
Press the Ⓘ (Registration) button in the back body
again to complete the password registration.
(Registration)
Description
Touch the keypad of the front body gently with your palm.
2⃞ Enter password
Enter the registered password in the keypad.
Order
■ Enter Cardkey
Check if the door opens!
Touch the keypad of the front body gently with
your palm or press [*] button to end.
Note
•Make sure to leave the door open when registering a password because you may accidentally lock
a door while trying to register or change a password the first time.
•The previously registered password will automatically be deleted when the new password is registered.
•When registering a password, the registered password will be displayed on the keypad
(Smart Pad) in sequential order and, then, be disappeared.
10
Play
》 To Open Door with Cardkey
1⃞ Touch with palm
3⃞ Touch with palm
Directions
How to Use
Play
Description
Contact card key
Make sure to examine if the door opens normally with
the registered password after the registration is
complete.
Note
•Keep the door open while you register card key to prevent yourself from
accidentally getting locked out.
•The previously registered Card key will automatically be deleted when
the new Card key is registered.
•When registering the card keys, Keypad displays the number of registered card keys.
11
How to Use
Lock Door
Open Door from Inside
The default setting is Safe Handle Setting.
》 To Close Door from Outside
Order
Auto Lock status
Play
5 Sec
》 To Open Door from Safe Handle Setting
Description
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after the door was closed.
Touch the keypad in the front body gently with your
palm to lock a door.
Manual Lock status
Directions
How to Use
Keep pressing the Safe Handle
button. And then, lower and push
the handle at the same time. The
Safe Handle button is found on the
interior handle.
(Closed)
(Open)
(Closed)
(Open)
(Closed)
(Open)
》 To Open Door from Safe Handle Setting Locked
Lower and push the interior
handle at the same time.
》 To Close Door from Inside
Order
Auto Lock status
Manual Lock status
Play
5 Sec
Description
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after the door was closed.
Turn the Manual Open/Close Device to Close side to
lock a door.
Note
•Even after a door was locked by the Auto Lock function,
please check again if the door was completely closed and locked.
12
》 To Open with Manual Device for Emergencies
Turn the Manual thumb turn to Open
side. Keep pressing the Safe Handle
button. And then, lower and push the
handle at the same time. The Safe
Handle button is found on the interior
handle.
Note
•Make sure to fully familiarize yourself with the operations for the Manual Device and
•비상상황을
대비하여in수동개폐장치
세이프핸들 조작방법을 숙지하시기 바랍니다.
the Safe Handle
preparation조작방법과
for emergencies.
13
Settings
Safe Handle Feature
Forced Lock
The technology to prevent a forced attempt to drill a hole in the door and unlock the Doorlock has been applied.
》 To Release Safe Handle Setting
Directions
Settings
》 Outside Forced Lock Setting - CARD
Order
1⃞ Open the battery cover and
take out a hex wrench.
Play
Contact the card key on [card key reader] for 5 seconds
until you hear 3 beeps.
Contact card key
2⃞ Keep pressing the Safe Handle button.
Turn the set bolt found in next to
the handle to clockwise.
Description
》 Outside Forced Lock Setting - Password
Order
》 To Set Safe Handle
1⃞ Open the battery cover and
take out a hex wrench.
2⃞ Turn the set bolt found in next to the
handle to Counter clockwise until the
Safe Handle button comes out.
Play
Description
1⃞ Touch with palm
Touch the keypad of the front body gently with your
palm.
2⃞ Enter password
Enter the registered password on the keypad.
3⃞ Press
Press the [#] button for 5 seconds.
(The beeping sound sets off for 3 times.)
button for
5 seconds
Volume Setting Feature
It enables you adjust the volume of various sounds from the product.
Order
》 Volume Setting
Order
To set volume switch
》 Inside Forced Lock Setting
Play
Description
The operation sound loudness is adjusted according to
the Volume Switch Setting.
(2 : Louder / 1: Lower / 0 : Mute )
Set / Release Inside
Forced Lock Switch
Play
Description
When the door is closed, move the Inside Forced Lock
Switch to LOCK position so that a red sticker can be seen.
Note
Note
•Be careful that the set bolt won’t detach when modifying the Safe Handle Setting.
•Even when the operation sound is set as‘Mute,’the error and alarm sounds will go off.
14
•If you try to open a door with the handle or the Manual Open/Close Device from inside when the Outside Forced Lock is set,
the alarm goes off.
•If the Inside Forced Lock is set, any attempt to open a door from outside whether it’d be a fingerprint or a password won’t work.
•When setting the Outside/Inside Forced Lock, enter the number on the keypad (Smart Pad) and
the numbers will flicker from left to right one by one and repeat twice.
15
Safety Feature
Auto / Manual Feature
Alarm Feature
The alarm sound continues for 30 minutes or until it is disarmed.
Auto Lock setting locks a door within 5 seconds after the door is closed.
Directions
Settings
》 Break-in / Damage Alarm
》 To Set Auto/Manual Feature
Order
Play
Description
Auto Lock Setting
Be the back body Auto/Manual Setting button
released to set Auto
Manual Lock Setting
Be the back body Auto/Manual Setting
button pressed to set Auto
Break-in: When someone tries to Break-in by opening
a door when it is locked, the alarm will go off.
Damage: When the front body was damaged
due to forced separation or drilling,
the alarm will go off.
Release Trespass/Damage Alarm
Method ❶ Enter the registered password.
Method ❷ Enter the registered fingerprint.
Method ❸ Press the interior Ⓘ button for 5 seconds.
》 High Temperature Alarm
•When there’
s fire, it detects the temperature of the inside.
It not only goes off an alarm but also releases the lock
status automatically.
•Even when the Inside Forced Lock mode is set,
the High Temperature Alarm releases the lock status
automatically.
Release High Temperature Alarm
Method ❶ Enter the registered password.
Method ❷ Enter the registered fingerprint.
Method ❸ Press the interior Ⓘ button for 5 seconds.
Note
Note
•Even after a door was locked by the Auto Lock function, please check again
if the door was completely locked.
16
•If a door is open when the Auto Lock is not properly operated, the Trespass Alarm might go off.
•If the Back body is exposed to direct sunlight for a long time, the temperature sensor may operate and
go off an alarm.
•Even when the Inside Forced Lock mode is set, the lock status will automatically be released if the High
Temperature Alarm goes off.
•If the alarm goes off due to damage, fire, or trespass, the numbers on the keypad will light up clockwise.
(It repeats the status for 30 minutes with alarm sound.)
17
Safety Feature
3-minute Lock Feature
At 3-minute Lock mode, no button, besides those in the back body, will work.
》 3-minute Lock Mode Display
•If a password or a fingerprint that is yet
to be registered is entered for 5
consecutive times, 3-minute Lock mode
is on and nothing will work for 3 minutes.
2 minute
passes.
1 minute
passes.
To Release 3-minute Lock
Method ❶ Press the Back body Ⓘ button.
Method ❷ Turn the Back body handle.
3 minute Lock starts.
2 minutes left.
1 minutes left.
The number [3]
lights up.
The number [2]
lights up.
The number [1]
lights up.
Open Door with fake password
Extra Features
It is the most effective feature when you are concerned about your password being accidentally exposed
when you have company or in the similar situations.
Option
》 To Open Door with fake password
20
Remote Control Module
Order
Play
Description
Remote Control
Emergency Power
1⃞ Touch with a palm
Touch the keypad with your palm gently.
22
Emergency Power Supply for
Discharged Batteries
2⃞ Enter the fake password
and a password
Method ❶ Enter the fake password → password
Method ❷ Enter the password → fake password
3⃞ Touch with a palm
Touch the keypad with your palm gently or
press [*] button to end.
Note
•3-minute Lock mode won’t affect any alarm and is sustained even after the product is rebooted.
•Once 3-minute Lock mode is on, the fake PIN code mode won’t work until the next normal verification
(fingerprint verification, normal password, open door from inside). In this case, please open a door with your correct password.
18
Product Specification
23
Option
Remote Control Module
Remote Control
Buy the Remote control Module and install it to link the remote control.
Not only FSK method but also the wireless encryption algorithm has been applied.
Extra Features
Option
》 To Register Remote Control
Order
Remote control Module
》 Install Remote Control Module
1⃞ Remove batteries
2⃞ Install Remote Control Module
Open the battery cover
in the back body
and remove
all batteries.
Equip the Remote control Module
to the slot.
Play
Description
1⃞ Press
(Registration)
button and button
Open the battery cover in the back body.
Press Ⓘ (Registration) button and then, [#] button.
2⃞ Enter number 0 and
5 on the keypad
Enter the number 0 and then, 5 button on the
keypad.
3⃞ Register fingerprint
4⃞ Press
button
Press the SET button of the remote control
Press the Ⓘ (Registration) button in the back
body again to complete the procedure.
(Registration)
》 To Release Remote Control
3⃞ Insert batteries
4⃞ Confirm the installation
Insert all the batteries by
checking the [⊕, ⊖]
connector.
If you hear a‘ting-a-ling’
sound, the Remote control
Module has been installed
correctly. Close the
battery cover.
Order
Ting-a-ling
Note
•The operation status may only be examined through the remote control.
20
Play
Description
1⃞ Press
(Registration)
button and button
Open the battery cover in the back body.
Press Ⓘ (Registration) button and then, [#] button.
2⃞ Enter number 7 and
5 on the keypad
Enter the number 7 and then, 5 again on the keypad.
3⃞ Press
button
Press the Ⓘ (Registration) button in the back body again
to complete the procedure.
(Registration)
Note
•The wireless encryption algorithm resorts to the floating ID technology where the wireless
password is changed every time the remote control is operated.
21
Specifications
Emergency Power Supply for Discharged Batteries
Specifications
You may open a door by contacting the 9V battery
》 To Supply Emergency Power
Order
Parts
Play
Description
1⃞ Contact the
9V battery
Open the emergency cover. Keep contacting the 9V
battery onto the emergency power supply terminal.
2⃞ Touch with a palm
Touch the keypad gently with your parm.
Front (Front Body)
76.4(W) x 290.4(H) x 27(D),
Zinc die-casting
Back (Main Body)
78.4(W) x 295.4(H) x 37(D),
Fiber-glass
Lever
Battery
3⃞ Enter password
Press each number of your password.
Lock case
Option
4⃞ Enter
button
Press [*] button.
(Once the motor is fully operated, you may detach the 9V battery.)
Specifications
Remote Control
Extra Features
Emergency Power
Remarks
Operating temperature :
-15~55℃ (5~131˚F)
Zinc die-casting
4EA 1.5V AA alkaline batteries
(Operating voltage: 4.5 ~ 6 V)
Last up to 1 year
(10 times used a day)
Steel and SUS304
Wireless
Optional
※ Battery life may vary depending on temperature, moisture levels,
frequency of use and the quality of the batteries.
※ Please make sure that all parts are included when purchasing the product.
※ Optional products may not be available depending on your country or local dealer.
》 To Replace Battery
1⃞ Expiry Period
The product uses four 1.5V(LR6) alkaline AA batteries.
They may sustain 1 year if used 10 times a day.
(Users are advised to use authentic alkaline batteries.)
2⃞ Low Battery Alarm
You must replace all 4 batteries for the following cases:
* The Low Battery Lamp on the front body lights on
* The Low Battery Lamp on the back body flickers red
* The alarm melody goes off
(a nursery rhyme starting with ting-a-ling melodies)
* The voice guide goes off “Please
(
replace batteries.”
)
One-on-one real-life size
1.5V(LR6) alkaline AA battery
Low Battery Lamp (red)
front body
back body
Note
•The battery duration varies in the temperature, humidity, the number of use, and the quality of the battery.
22
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement