BC50M
BC50M Data Sheet - 2012-09-21
Embedded Solutions
BC50M - Box Computer for Mobile
Applications / AMD
n
n
n
n
n
n
n
n
n
The BC50M (formerly called BC1) is a maintenance-free
box computer that has been designed for independent
use or as display computer electronics for use in
mobile applications, e.g. in trains, commercial
vehicles, mobile machines or airplanes.
It is powered by an AMD Embedded G-Series APU
(Accelerated Processing Unit), the T48N, running at
1.4 GHz. The G-Series combines low-power CPUs and
advanced GPUs, in this case an AMD Radeon™ HD 6310,
into a single embedded device. The use of the
Embedded G-Series makes for high scalability in CPU
(single/dual core) and graphics performance (various
Radeon™ GPUs or none at all).
The BC50M is equipped with 2 GB of DDR3 SDRAM and
offers SD card and mSATA slots. A SATA harddisk/solid-state drive can be installed within the
housing as an option. The system is designed for
fanless operation at temperatures from -40 to
+70°C (+85°C for up to 10 minutes), its special
aluminum housing with cooling fins serves as a
heatsink for the internal electronics and in this
way provides conduction cooling.
The BC50M supports up to two DisplayPort® interfaces
with a maximum resolution of 2560x1600 each. The
1
Compliant to EN 50155 (railways)
Prepared for e1 (automotive)
AMD Embedded G-Series APU
2 DisplayPorts, up to 2560x1600 each
2 Gigabit Ethernet, 1 USB 2.0
WLAN, UMTS, GPS, GSM, HSDPA, EDGE, LTE via 2
PCI Express® Mini Card slots
2 Slots for IBIS, GPS, RS232, RS485, RS422
24 VDC nom. (9 to 36 V) class S2 power
supply, incl. ignition
-40 to +70(+85)°C operating temperature
DisplayPort® interfaces and all other I/O are
available at the unit's front panel on standard
connectors like USB, 9-pin D-Sub (HD audio and
optional serial I/O), 8-pin M12 (Gigabit Ethernet)
and DisplayPort®. On the inside, the system offers
two PCI Express® Mini card slots with two SIM card
slots. By default, one is used for each of the two
PCI Express® Mini cards, but the first PCI Express®
Mini card can also switch between the two SIM cards
as an option. The necessary antenna connectors can be
made available at the front panel.
The BC50M comes with its own integrated 30W 24 VDC
nom. (9 to 36 V) class S2 wide-range power supply
and is compliant with EN 50155 and prepared for e1
certification. The power can be switched on and off
using an ignition signal on the power connector,
and a run-down time after switching off the power
can be adjusted by software.
The combination of the various CPU/GPU options with
the available selection of external interfaces
(realized via separate graphics and I/O interface
boards within the system) makes for an extremely
flexible system design that can quickly be tailored to
a vast number of applications.
®
BC50M Data Sheet - 2012-09-21
Embedded Solutions
Technical Data
CPU
n AMD Embedded G-Series T48N
o 1.4 GHz processor core frequency
o Accelerated Processing Unit (APU), also includes GPU
(see Graphics)
Controller Hub
n AMD A55E
o
n
n
n
Memory
n 64 KB L1 and 512 KB L2 cache
n 2 GB DDR3 SDRAM system memory
o Soldered
o 1333 MT/s (667 MHz)
Mass Storage
n One SD card slot
o Via USB
n One mSATA slot
o Transfer rate up to 3 Gbit/s
n Serial ATA (SATA)
o One port for hard-disk/solid-state drive mounted
within the unit's housing
o SATA Revision 3.x support
o Transfer rates up to 600 MB/s (6 Gbit/s)
Graphics
n AMD Radeon™ HD 6310
o Dual independent display support
o Dual DisplayPort®
o Maximum resolution: 2560x1600
o Embedded in T48N APU
n 3D Graphics Acceleration
o Full DirectX® 11 support, including full speed 32-bit
floating point per component operations
o Shader Model 5
o OpenCL™ 1.1 support
o OpenGL® 4.0 support
n Motion Video Acceleration
o Dedicated hardware (UVD 3) for H.264, VC-1 and MPEG2
decoding
o HD HQV and SD HQV support: noise removal, detail
enhancement, color enhancement, cadence detection,
sharpness, and advanced de-interlacing
o Super up-conversion for SD to HD resolutions
Front I/O
n 2 DisplayPort® 1.1a interfaces
o AUX channels and hot plug detection
o USB channels optional
n 1 HD audio
o HD audio codec
2
Audio stereo in
Audio stereo out
o SPDIF out
o All available via 9-pin D-Sub connector
2 Gigabit Ethernet
o Via M12 connectors
1 USB 2.0
o Via Series A connector
2 SA-Adapter™ slots for serial I/O
o 1 UART or IBIS, GPS
o 1 UART or CAN bus
6 status LEDs
o 4 for Ethernet link and activity status
o 2 for general board status
o
n
2 PCI Express® Mini Card slots
n For functions like WIFI, WIMAX, GSM/GPRS, UMTS
n 2 SIM card slots
n PCI Express® and USB interface
Real-Time Clock
n Buffered by Gold Cap for up to 12 h
Electrical Specifications
n Isolation voltage 1,500 VDC
o Ethernet port 1, Ethernet port 2, audio interface,
power input, USB interface
n Supply voltage:
o 24 VDC nom. (9 to 36 V)
o EN 50155 power interruption class S2
n Power consumption: up to 25 W
Mechanical Specifications
n Dimensions: approx. 250 mm x 220 mm x 44.1 mm
n Weight: 1.8 kg
n Front protected according to IP20
Environmental Specifications
n Temperature range (operation):
o -40°C to 70°C (screened), with up to 85°C for 10
minutes according to class Tx (EN 50155)
o Fanless operation
n Temperature range (storage): -40..+85°C
n Relative humidity (operation): max. 95% non-condensing
n Relative humidity (storage): max. 95% non-condensing
n Altitude: -300 m to +3,000 m
n Shock: 50 m/s², 30 ms
n Vibration (function): 1 m/s², 5 Hz - 150 Hz
n Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz
n Conformal coating of internal components on request
®
BC50M Data Sheet - 2012-09-21
Embedded Solutions
Technical Data
MTBF
n 262,804 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
n PCB manufactured with a flammability rating of 94V-0 by
UL recognized manufacturers
EMC
n Conforming to EN 55022 (radio disturbance), IEC 61000-4-2
(ESD) and IEC 61000-4-4 (burst)
n Prepared for certification according to e1 requirements
of the German Federal Motor Transport Authority
BIOS
n InsydeH2O™ UEFI Framework
Software Support
n Windows® 7
n Windows® Embedded Standard 7
n Windows® XP Embedded
n Linux
n For more information on supported operating system
versions and drivers see Software.
3
®
BC50M Data Sheet - 2012-09-21
Embedded Solutions
Diagram
4
®
BC50M Data Sheet - 2012-09-21
Embedded Solutions
Configuration & Options
Standard Configurations
Article No.
APU
Graphics
Memory
Input Voltage
09BC50M00
AMD T48N, 1.4 AMD Radeon™ 2 GB
24 VDC nom.
GHz Dual Core HD 6310
DDR3-1066,
(18W)
64KB L1 cache,
512kB L2 cache
HD Audio
Antenna
Connectors
SATA HDD/SSD
Yes
No
No
Options
APU
n AMD T56N, 1.65 GHz Dual Core, 18W, AMD Radeon™ HD 6320
n AMD T52R, 1.5 GHz Single Core, 18W, AMD Radeon™ HD 6310
n AMD T48N, 1.4 GHz Dual Core, 18W, AMD Radeon™ HD 6310
n AMD T40N, 1.0 GHz Dual Core, 9W, AMD Radeon™ HD 6290
n AMD T44R, 1.2 GHz Single Core, 9W, AMD Radeon™ HD 6250
n AMD T40E, 1.0 GHz Dual Core, 6.4W, AMD Radeon™ HD 6250
n AMD T40R, 1.0 GHz Single Core, 5.5W, AMD Radeon™ HD 6250
n AMD T16R, 615 MHz Single Core, 4.5W, AMD Radeon™ HD 6250
Memory
n Up to 4 GB DDR3 SDRAM system memory
n SATA hard-disk/solid state drive (mounted within housing)
Graphics
n Maximum resolution depending on GPU
o 2560x1600 (all DisplayPort® interfaces) with Radeon™
HD 6310 and 6320
o 1920x1200 (all DisplayPort® interfaces) with Radeon™
HD 6250 and 6290
I/O
n Antenna connectors
o For functions like WIFI, WIMAX, GSM/GPRS, UMTS in
combination with PCI Express® Mini Card(s)
o Reverse SMA connector
n SA-Adapter™
o Binary I/O using SA15 also possible (depending on
functions implemented as FPGA IP cores)
Electrical Specifications
n Input voltage 36 VDC nom.
Environmental Specifications
n Temperature range (operation):
o -40°C to 85°C (screened) with wider housing with
additional cooling fins
As the product concept is very flexible, there are many
other configuration possibilities. Please contact our
sales team if you do not find your required function in
the options. Please note that some of these options may
only be available for large volumes.
5
®
BC50M Data Sheet - 2012-09-21
Embedded Solutions
Ordering Information
Standard BC50M Models
09BC50M00
Box computer with dual graphics connection,
24 VDC PSU, AMD T48N, 1.4 GHz, 2 GB RAM, SD
card slot, mSATA slot, 2x DisplayPort®, 2x
Gb Ethernet, 1x USB, 2x SA-Adapter™ slot
(UARTs, fieldbuses), 2x PCI Express® Mini
card slot, 2x SIM card slot,
-40..+70(+85)°C screened, IP40, EN 50155,
prepared for e1
Related Hardware
08AE63-00
This product is designed to work under Linux. See below
for potentially available separate software packages from
MEN.
13SC24-90
Linux I2C controller driver (MEN) for SC24,
AE51 and BC50M
13Z015-06
MDIS5™ low-level driver sources (MEN) for
16Z029_CAN (MSCAN/Layer2)
13Z016-06
MDIS5™ driver (MEN) for 16Z029_CAN (CANopen
master)
13Z017-06
MDIS5™ low-level driver sources (MEN) for
16Z034_GPIO and 16Z037_GPIO
AE63, DisplayPort® to LVDS converter,
temperature sensor, ambient light, touch
input, key control, input voltage 12V..24V,
-40°..+85°C screened
Software: Windows
0751-0047
SD card, 4GB, -40..+85°C
10F014-78
0751-0051
SSD mSATA, 8 GB, -40..+85°C
Windows® XP Embedded BSP (MEN) for F11S,
F14, F15, F17, F18, F19P, F21P, G20, XM1,
XM1L, XM2, MM1, MM2, SC21, SC24, DC1, DC2,
RC1 and BC50M
10Y000-78
Windows® Embedded Standard 7 BSP for F11S,
F19P, F21P, G20, XM1L, XM2, MM1, MM2, SC21,
SC24, BC50M, F206, F210, F215, F216, G215,
P506, P507 and P511
13T010-70
Windows® 32-bit network driver (Intel®) for
XM1, XM1L, XM2, MM2, F11S, F18, F18E, F19P,
F21P, G20, GM1, GM2, G211, G211F, SC24 and
BC50M
13T020-70
Windows® 64-bit network driver (Intel®) for
F18, F18E, F19P, F21P, G20, GM1, GM2, G211,
G211F, XM2, SC24 and BC50M
13T025-70
Windows® XP GPU and chipset driver (AMD)
for BC50M and SC24
13T026-70
Windows® Vista™ / Windows® 7 GPU and
chipset driver (AMD) for BC50M, SC24 and
G214
13Z015-70
MDIS4™/2004/MDIS5™ Windows® driver (MEN)
for 16Z029_CAN (MSCAN/Layer2)
13Z016-70
MDIS5™ Windows® driver (MEN) for 16Z029_CAN
(CANopen master)
13Z017-70
MDIS4™/2004 / MDIS5™ Windows® driver (MEN)
for 16Z034_GPIO devices
Memory
This product is designed to work under Windows®. See
below for potentially available separate software
packages from MEN.
SA-Adapters
You can find a more detailed overview of possible carrier
board/SA-Adapter™ combinations along with software
support in our option matrix (PDF).
08SA01-06
RS232, not optically isolated, -40..+85°C
screened
08SA02-07
RS422/485, full duplex, optically isolated,
-40..+85°C screened
08SA03-01
RS232, optically isolated, -40..+85°C
screened
08SA08-01
CAN ISO high-speed, optically isolated,
-40..+85°C screened
08SA15-00
8 binary I/O channels, -40..+85°C with
qualified components, no RoHS
08SA22-00
IBIS master SA-Adapter™, -40..+85°C screened
08SA22-01
IBIS slave SA-Adapter™, -40..+85°C screened
Miscellaneous Accessories
05BC00-00
05BC01-00
0780-0005
Starter Kit for BoxPC: AC/DC power supply,
DisplayPort® to DVI adapter (active), M12
to RJ45 Gbit Ethernet cable, HF cable with
U.FL plug to RP-SMA plug
Mechanics kit for BoxPC: 19'' mounting kit,
heat sinks for horizontal and vertical
mounting
DisplayPort® to DVI-D adapter, 20 cm
Software: Linux
6
For operating systems not mentioned here contact MEN
sales.
Documentation
®
BC50M Data Sheet - 2012-09-21
Embedded Solutions
Ordering Information
20BC01-00
BC50M User Manual
20BC50MER
BC50M Errata
21APPN015
Application Note: Using Real-Time Operating
Systems on MEN CPUs with InsydeH2O™ UEFI
BIOS
For the most up-to-date ordering information and direct
links to other data sheets and downloads, see the BC50M
online data sheet under » www.men.de.
Germany
MEN Mikro Elektronik GmbH
Neuwieder Straße 3-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
E-mail [email protected]
www.men.de
France
MEN Mikro Elektronik SA
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
E-mail [email protected]
www.men-france.fr
USA
MEN Micro, Inc.
24 North Main Street
Ambler, PA 19002
Phone (215) 542-9575
Fax (215) 542-9577
E-mail [email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue.
All brand or product names are trademarks or registered trademarks of their respective holders.
MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication.
MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the
consequences of anything, done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication.
The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical
user manual.The correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent
validation documents for each product for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use
MEN products for any unintended or unauthorized application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated
with such unintended or unauthorized use, even if such claim alleges that MEN was negligent regarding the design or manufacture of the part.
In no case is MEN liable for the correct function of the technical installation where MEN products are a part of.
Copyright © 2012 MEN Mikro Elektronik GmbH. All rights reserved.
7
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement