AMP-25 AC/DC TRMS Mini-Clamp

AMP-25 AC/DC TRMS Mini-Clamp
AMP-25
AC/DC TRMS Mini-Clamp
Convenience Without Compromise
Small size doesn’t mean small features. The Amprobe AMP-25 Mini-Clamp is pocket-sized,
enabling quick and easy spot checks of electrical systems. With its rugged construction
and CAT III 600V rating, the AMP-25 is a must-have professional troubleshooting tool for
commercial electricians and electrical contractors.
The AMP-25 is designed to measure AC/DC load current and inrush current for motors.
Essential features like True-RMS, non-contact voltage and low pass filter make this clamp
stand tall next to clamps twice its size. With the AMP-25, you never have to sacrifice
performance for size.
AMP-25 Features
• True-RMS for noisy
environments provides
accuracy and dependability
Pocket-sized
5.8” height.
• AC & DC current to 300 A
(10mA resolution)
• Low pass filter for variable
frequency drives
• Inrush current for motor
start-up monitoring
• Non-contact voltage
detection (NCV)
• Jaw opening to 1 in
(25 mm)
• Autoranging
• DCA zero and data hold
• Auto power off
• Large LCD backlit display
• Safety Rated CAT III 600 V
AMP-25
AC/DC TRMS
Mini-Clamp
Amprobe® | [email protected] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
©2014 Amprobe® For detailed specifications and ordering go to www.Amprobe.com 6004358 A
AMP-25 Applications
Troubleshoot electrical
systems and measure AC/DC
load current on exposed wires
in a breaker panel.
Utilize the inrush current
function for motor start-up
monitoring.
The non-contact voltage (NCV)
function checks for voltage
presence.
Pocket-sized for quick and easy
spot checks of electrical systems.
AMP-25 Detailed Specifications
Feature
AC Current (1)
AMP-25
60.00 / 300.0 A
Best Accuracy
+/-(1.5% + 5 LSD)
@ 50 to 100 Hz ≥ 3 A
+/-(2.5% + 5 LSD)
@ 100 to 400 Hz ≥ 3 A
General Specifications
Digital: 6000 counts, updates 2/sec
Range
Autoranging
Overrange Indication
Operating Temperature
DC Current (2)
Low Pass Filter
60.00 / 300.0 A
300.0 A
True-RMS
•
Inrush Current
•
+/-(1.5% + 5 LSD)
@ 300 A range
+/-(3.5% + 5 LSD)
@ 50 to 60 Hz ≥ 3 A
Operating Altitude
Storage Temperature
Pollution Degree
Temperature Coefficient
Vibration Requirement
Non-Contact
Voltage
Data Hold
•
•
Drop Proof
Battery
Battery Life
(2)
For non-sinusoidal waveforms:
Add 3.0% for C.F. 1.0 to 2.0
Add 5.0% for C.F. 2.0 to 2.5
Add 7.0% for C.F. 2.5 to 3.0
Position error of clamp: +/- 1.5 % of LCD reading
Add 10 LSD in auto AC/DC sense mode
OL or -OL
32 °F to 86 °F (0 °C to 30 °C), ≤ 80% RH
86 °F to 104°F (30°C to 40 °C), ≤ 75% RH
104 °F to 122°F (40°C to 50 °C), ≤ 45% RH
≤ 2000 m
-4 °F to 140 °F (-20°C to +60°C)
2
0.2 x (specified accuracy)/
°F(<64.4°F, >82.4°F)/ °C (<18 °C, >28 °C)
MIL-PRF-28800F for A Class 2
4 feet (120 cm)
Two 1.5 V LR44 size button batteries
20 hours typical
Low Battery Indication
Auto Power Off
Note (1): Crest Factor (C.F.) may be up to 3.0 as 4000 counts.
AMP-25
Display
Overvoltage Category
Safety Compliance
EMC Compliance
Idle for 20 minutes
CAT III 600 V
IEC/EN 61010-1, IEC/EN 61010-2-030,
IEC/EN 61010-2-032
IEC/EN 61326-1
Agency Approval
Dimensions (H x W x L)
Weight
Jaw Opening & Conductor
Diameter
5.8 x 2.4x 1.3 in (147 x 60 x 32 mm)
Approximately 0.31 lb (140 g)
with batteries installed
1.0 in (25 mm) max.
Accessories Included: Carrying case, two 1.5 V LR44 batteries installed and user manual.
Amprobe®
[email protected]
Fluke Corporation, Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
For complete information about Amprobe test tools, visit www.Amprobe.com
© 2014 Amprobe | Specifications subject to change without notice. Printed In U.S.A.
6004358 A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement