Fibaro FGWPE/F, FGD221, FGS221, FGS211, FGR221, FGRM222, FGB 001, FGRGBWM-441,, FGK, FGFS, FGSS, FGMS, Living Connect Advanced User's Guide

Below you will find brief information for Wall Plug FGWPE/F, Dimmer FGD221, Relay Switch FGS221, Relay Switch FGS211, Roller Shutter FGR221, Roller Shutter FGRM222, Dimmer Bypass FGB 001, RGBW Controller FGRGBWM-441. Fibaro Wall Plug allows you to control and monitor power consumption of any connected device. Fibaro Dimmer is a Z-Wave compatible module, designed to be installed in standard wall switch boxes. It can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. It automatically senses connected device, features automatic overload protection switch-off and soft start function. Fibaro Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate two independent devices. The Fibaro Relay Switch can switch connected devices on or off either through radio waves or through the wall switch connected directly to it. Fibaro Roller Shutter is a radio controlled Z-Wave compatible module designed to control any type of electrical roller shutters. It allows you to control the shutter position through radio waves, via any Z-Wave compatible controller. The Fibaro Dimmer Bypass can be used to bypass the dimmer function and provide power to the connected device. The Fibaro RGBW Controller is a highly versatile Z-Wave compatible module that can be used to control a wide range of devices, including LED strips, RGBW bulbs, and other devices with a 0-10V input. It allows you to control the color and brightness of your lighting, as well as create custom scenes and lighting effects.

PDF Download
Document
Fibaro Wall Plug FGWPE/F, Dimmer FGD221, Relay Switch FGS221 - Advanced User's Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Wireless control via Z-Wave
  • Power consumption monitoring
  • Overload protection
  • Soft Start function
  • Integration with Home Center 2
  • Scene creation and automation
  • Compatibility with various light sources
  • Remote control via smartphone or tablet
  • Energy saving capabilities

Frequently asked questions

Relay Switch 2x1,5kW may be powered by 24V DC current.

Yes, a Relay Switch 2x1,5kW may be connected to two independent circuits at the same time - one powering the module, another one (even powered by a different voltage) powering the circuit triggered by the module.

The Relay Switch 2x1,5kW is designed to work on three-wire electrical system only, i.e. it needs the Neutral wire.

In such a case another circuit, powering the Relay Switches (with 24V at least) will be necessary.

Yes. These modules may be used to operate both electrical and hydraulic floor heating systems, in such use the modules will be used to turn electric valves ON or OFF. Heating itself will be programmed in the Heating Panel in of the HC2. For monitoring temperature we recommended the use of a DS18B20 sensor, together with a Fibaro Universal Binary Sensor.
Preparing document for printing…
0%