Series 90-30 PLCs - Control & Protection
Series 90-30
Programmable Controllers
Series 90-30 PLCs
The Series 90-30 PLCs are a family of controllers, I/O systems and specialty
­modules designed to meet the demand for versatile industrial solutions. With a
single overall control architecture and modular design, the Series 90-30 is trusted
worldwide in such applications as high speed packaging, ­material handling, complex motion control, water treatment, ­continuous emissions monitoring,
mining, food processing, elevator control, injection molding, and many more.
One reason for the versatility of the Series 90-30 is the large variety of discrete
and analog I/O modules (over 100 modules), as well as specialty modules, that
are available. In addition, GE Intelligent Platforms offer a wide range of high-level
­communication options, from a simple serial connection to a high-speed
Ethernet interface and a number of bus modules.
CPUs
Proficy Machine Edition
Proficy Machine Edition is an
advanced software environment for
the development and maintenance
of machine level automation.
Visualization, motion control, and
execution logic are developed with
a single programmer.
Networks and
Distributed I/O Systems
pages 1.109-1.111
Specialty Modules
pages 1.103-1.108
pages 1.85-1.87
Baseplates
Power Supplies
Serial
Communications Modules
Analog I/O Modules (input) pages 1.94-1.95
Analog I/O Modules
(output)
pages 1.101-1.102
page 1.88
Discrete I/O Modules (input) pages 1.91-1.93
Discrete I/O Modules
(output)
pages 1.96-1.100
pages 1.89-1.90
page 1.112
Power Measurement Modules page 1.113
Pneumatic Module
page 1.114
Motion Modules
pages 1.116-1.117
Expansion Modules
page 1.118
Portable Program
Download Device (PPDD) pages 1.119-1.120
α and βi Series Servo Amplifiers page 1.124
VersaMotion
pages 1.125-1.133
Accessories
pages 1.121-1.122
Configuration Guidelines page 1.123
Publication Reference Chart
GFK-0255
Series 90 Programmable Coprocessor Module &
Support Software User’s Manual
GFK-0772
PCM C Function Library Reference Manual
GFK-1213
Series 90-30 FIP Bus Controller User’s Manual
GFK-0781
Power Mate APM for Series 90-30 PLC Follower
Mode User’s Manual
GFK-1256
Power Mate for Series 90-30 User’s Manual
GFK-1322
Series 90-30 PLC LonWorks Bus Interface
Module User’s Manual
GFK-0293
Series 90-30 High Speed Counter User’s Manual
GFK-0356
Series 90-30 PLC Installation and Hardware Manual
GFK-0814
GFK-0412
Series 90-30 Genius Communications Module
User’s Manual
C Programmer’s Toolkit for Series 90 PCM Quick
Reference Guide
GFK-1411
Series 90-30 System Manual for Windows® Users
GFK-0823
Series 90-30 I/O Link Master Module User’s Manual
GFK-1464
GFK-0828
Series 90-30 Diagnostic System User’s Guide
Motion Mate DSM302 for Series 90-30 PLCs
User’s Manual
GFK-0840
Power Mate APM for Series 90-30 PLC Standard
Mode User’s Manual
GFK-1466
Temperature Control Module for the Series 90-30
PLC User’s Manual
GFK-0467
Series 90-30/20/Micro PLC CPU Instruction Set
Reference Manual
GFK-0529
Series 90 PLC SNP Communications User’s Manual
GFK-0582
Series 90 PLC Serial Communications Driver
User’s Manual
GFK-0854
Series 90 Sequential Function Chart Programming
Language User’s Manual
GFK-1541
TCP/IP Ethernet Communications for the Series 90
PLC User’s Manual
GFK-0585
Series 90 PLC SNP Communications Driver
User’s Manual
GFK-0898
Series 90-30 PLC I/O Module Specifications Manual
GFK-1734
GFK-1028
Series 90-30 I/O Processor Module User’s Manual
Power Transducer for the Series 90-30 PLC
User’s Manual
GFK-0631
Series 90-30 I/O Link Slave Interface User’s Manual
GFK-1034
Series 90-30 Genius Bus Controller User’s Manual
GFK-1868
Proficy Machine Edition Getting Started Guide
GFK-0664
Series 90-30 Axis Positioning Module
(Power Mate-APM) Programmer’s Manual
GFK-1037
Series 90-30 FIP Remote I/O Scanner User’s Manual
GFK-2121
Series 90-30 Profibus Modules User’s Manual
GFK-1056
Series 90-30 State Logic Control System
User’s Manual
GFS-062
Series 90-30 Quick Reference Guide for
Maintenance
GFK-1084
TCP/IP Ethernet Communications for the Series
90-30 PLC User’s Manual
GFZ-0085
Series 90-30 Troubleshooting Pocket Guide
GFK-0695
Series 90-30 Enhanced Genius Communications
Module User’s Manual
GFK-0712
Series 90 Digital Event Recorder User’s Manual
GFK-0726
State Logic Processor for Series 90-30 PLC
User’s Guide
GFK-1179
Installation Requirements for Conformance
to Standards
GFK-0771
C Programmer’s Toolkit for Series 90 PCMs
User’s Manual
GFK-1186
TCP/IP Ethernet Communications for the Series 90
PLC Station Manager Manual
1.84
GE Intelligent Platforms Control Systems Solutions
IC690CDU002 InfoLink for PLC CD-ROM
www.ge-ip.com
Programmable Controllers
Series 90-30
CPUs
For entry-level applications with low I/O counts, the CPU is embedded into the backplane, making all
slots available for I/O. These modules are compatible with advanced modules such as Ethernet, various
bus modules, and control. Mid-range CPU models are modular and come in various memory sizes,
­performance capability and increased functionality such as overrides, battery-backed clock and
Programmable Coprocessor module support. The high-performance CPUs are based on the latest
386EX processor for fast computation and high throughput. They can handle up to 4,096 I/O and
start at 32K of memory and are programmable in a number of standard languages.
IC693CPU311
IC693CPU313
IC693CPU323
IC693CPU350
IC693CPU360
Product Name
5-slot Baseplate
(Model 311)
5-slot Baseplate
(Model 313)
10-slot Baseplate
(Model 323)
CPU (Model 350)
CPU (Model 360)
Lifecycle Status
Active
Active
Active
Active
Active
I/O Base with
built-in CPU
I/O Base with
built-in CPU
I/O Base with
built-in CPU
CPU Module
CPU Module
Boolean Execution Speed (ms/K)
18
0.6
0.6
0.22
0.22
User Logic Memory (K bytes)
6
12
12
74
240
Real Time Clock
No
No
No
Yes
Yes
I/O Discrete Points
160
160
320
4096
4096
I/O Analog Points
64 In / 32 Out
64 In / 32 Out
64 In / 32 Out
2048 In / 512 Out
2048 In / 512 Out
RAM, EPROM, EEPROM
RAM, EPROM, EEPROM
RAM, EPROM, EEPROM
RAM, Flash
RAM, Flash
Module Type
Type of Memory Storage
Processor Speed (MHz)
Built-in Communication Ports
Total Number of Racks
Communications Option Modules
Field Busses/Device Networks
Software Programming Support
Internal Power Used
www.ge-ip.com
N/A
N/A
N/A
N/A
N/A
One RS-485 port on
power supply.
Supports SNP
One RS-485 port on
power supply.
Supports SNP
One RS-485 port on
power supply.
Supports SNP
One RS-485 port on
power supply.
Supports SNP
One RS-485 port on
power supply.
Supports SNP
8
8
1 (CPU built in)
1 (CPU built in)
1 (CPU built in)
Serial-SNP and RTU,
LAN-Genius, Ethernet
SRTP and Ethernet
Modbus TCP
Ethernet, Genius,
Profibus-DP, DeviceNet,
Interbus-S, CsCAN
Logicmaster (DOS),
VersaPro (Windows),
Proficy Logic Developer Machine Edition
Serial-SNP and RTU,
LAN-Genius, Ethernet
SRTP and Ethernet
Modbus TCP
Ethernet, Genius,
Profibus-DP, DeviceNet,
Interbus-S, CsCAN
Logicmaster (DOS),
VersaPro (Windows),
Proficy Logic Developer
-Machine Edition
Serial-SNP and RTU,
LAN-Genius, Ethernet
SRTP and Ethernet
Modbus TCP
Ethernet, Genius,
Profibus-DP, DeviceNet,
Interbus-S, CsCAN
Logicmaster (DOS),
VersaPro (Windows),
Proficy Logic Developer
-Machine Edition
410 mA @ 5 VDC
430 mA @ 5 VDC
430 mA @ 5 VDC
Serial-SNP, SNPX, RTU
Serial-SNP, SNPX, RTU
and CCM, LAN-Genius, and CCM, LAN-Genius,
Ethernet SRTP and
Ethernet SRTP and
Ethernet Modbus TCP
Ethernet Modbus TCP
Ethernet, Genius,
Ethernet, Genius,
Profibus-DP, DeviceNet, Profibus-DP, DeviceNet,
Interbus-S, CsCAN
Interbus-S, CsCAN
Logicmaster (DOS),
Logicmaster (DOS),
VersaPro (Windows),
VersaPro (Windows),
Proficy Logic Developer Proficy Logic Developer
-Machine Edition
-Machine Edition
670 mA @ 5 VDC
670 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions
1.85
Series 90-30
Programmable Controllers
CPUs
For entry-level applications with low I/O counts, the CPU is embedded into the backplane, making all
slots available for I/O. These modules are compatible with advanced modules such as Ethernet, various
bus modules, and control. Mid-range CPU models are modular and come in various memory sizes,
­performance capability and increased functionality such as overrides, battery-backed clock and
Programmable Coprocessor module support. The high-performance CPUs are based on the latest
386EX processor for fast computation and high throughput. They can handle up to 4,096 I/O and
start at 32K of memory and are programmable in a number of standard languages.
Product Name
Lifecycle Status
IC693CPU363
IC693CPU366
IC693CPU367
CPU (Model 363)
CPU (Model 366 with
built-in Profibus Master)
CPU (Model 367 with
built-in Profibus Slave)
Active
Active
Mature
CPU Module
CPU Module
CPU Module
Boolean Execution Speed (ms/K)
0.22
0.22
0.22
User Logic Memory (K bytes)
240
240
240
Real Time Clock
Yes
Yes
Yes
I/O Discrete Points
4096
4096
4096
I/O Analog Points
2048 In / 512 Out
2048 In / 512 Out
2048 In / 512 Out
RAM, Flash
RAM, Flash
RAM, Flash
Module Type
Type of Memory Storage
Processor Speed (MHz)
Built-in Communication Ports
Total Number of Racks
Communications Option Modules
Field Busses/Device Networks
Software Programming Support
Internal Power Used
1.86
N/A
N/A
N/A
Three total. One RS-485 port on power
supply, one RS-232 and one RS-485 port
on CPU. Supports SNP, RTU Master and
Slave, Serial Read and Write
One Profibus DP Slave port and RS-485
port on power supply. Supports SNP.
One Profibus DP Master, Class 1 V0 port
and RS-485 port on power supply.
Supports SNP.
8
8
8
Serial-SNP, SNPX, RTU and CCM,
LAN-Genius, Ethernet SRTP and
Ethernet Modbus TCP
Serial-SNP, SNPX, RTU and CCM,
LAN-Genius, Ethernet SRTP and
Ethernet Modbus TCP
Serial-SNP, SNPX, RTU and CCM,
LAN-Genius, Ethernet SRTP and
Ethernet Modbus TCP
Ethernet, Genius, Profibus-DP, DeviceNet,
Interbus-S, CsCAN
Ethernet, Genius, Profibus-DP, DeviceNet,
Interbus-S, CsCAN
Ethernet, Genius, Profibus-DP, DeviceNet,
Interbus-S, CsCAN
Logicmaster (DOS),
VersaPro (Windows), Proficy Logic
Developer - Machine Edition
Proficy Logic Developer
- Machine Edition
Proficy Logic Developer
-Machine Edition
890 mA @ 5 VDC
940 mA @ 5 VDC
940 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
CPUs
For entry-level applications with low I/O counts, the CPU is embedded into the backplane, making all
slots available for I/O. These modules are compatible with advanced modules such as Ethernet, various
bus modules, and control. Mid-range CPU models are modular and come in various memory sizes,
­performance capability and increased functionality such as overrides, battery-backed clock and
Programmable Coprocessor module support. The high-performance CPUs are based on the latest
386EX processor for fast computation and high throughput. They can handle up to 4,096 I/O and
start at 32K of memory and are programmable in a number of standard languages.
IC693CPU370
IC693CPU372
IC693CPU374 PLUS
Product Name
CPU (Model 370).
Requires High Capacity
Power Supply
CPU (Model 372 with
built-in 10/100 Mbps
Ethernet and WEB Enabled).
Requires High Capacity
Power Supply
CPU (Model 374 PLUS with
built-in 10/100 Mbps
Ethernet and Web Enabled).
Requires High Capacity
Power Supply
Lifecycle Status
Active
Active
Active
CPU Module
CPU Module
CPU Module
Boolean Execution Speed (ms/K)
0.15
0.15
0.15
User Logic Memory (K bytes)
240
120
240
Real Time Clock
Yes
Yes
Yes
I/O Discrete Points
4096
4096
4096
I/O Analog Points
2048 In / 512 Out
2048 In / 512 Out
2048 In / 512 Out
RAM, Flash
RAM, Flash
RAM, Flash
133Mhz
133Mhz
133Mhz
One RS-485 port
on power supply.
Supports SNP
One RS-485 port
on power supply.
Supports SNP and two
Ethernet ports;
(one IP address) on CPU,
10/100 Mbps built-in switch,
SRTP - channels
(Producer and Consumer);
EGD, Modbus TCP Client/Server
and Web Diagnostics Support
One RS-485 port
on power supply.
Supports SNP and two
Ethernet ports;
(one IP address) on CPU,
10/100 Mbps built-in switch,
SRTP - channels
(Producer and Consumer);
EGD, Modbus TCP Client/Server
and Web Diagnostics Support
Module Type
Type of Memory Storage
Processor Speed (MHz)
Built-in Communication Ports
Total Number of Racks
Communications Option Modules
Field Busses/Device Networks
Software Programming Support
Internal Power Used
www.ge-ip.com
8
8
8
Serial-SNP, SNPX, RTU and CCM,
LAN-Genius, Ethernet SRTP and
Ethernet Modbus TCP Client/Server
Ethernet, Genius, Profibus-DP,
DeviceNet, Interbus-S, CsCAN
Proficy Logic Developer
- Machine Edition
Serial-SNP, SNPX, RTU and CCM,
LAN-Genius, Ethernet SRTP and
Ethernet Modbus TCP Client/Server
Ethernet, Genius, Profibus-DP,
DeviceNet, Interbus-S, CsCAN
Proficy Logic Developer
- Machine Edition
Serial-SNP, SNPX, RTU and CCM,
LAN-Genius, Ethernet SRTP and
Ethernet Modbus TCP Client/Server
Ethernet, Genius, Profibus-DP,
DeviceNet, Interbus-S, CsCAN
Proficy Logic Developer
-Machine Edition
1.4 Amps @ 5 VDC
1.4 Amps @ 5 VDC
1.4 Amps @ 5 VDC
GE Intelligent Platforms Control Systems Solutions
1.87
Series 90-30
Programmable Controllers
Baseplates
Series 90-30 baseplates are available in 5- and 10-slot configurations to the meet the needs
of your application. You can choose expansion or remote baseplates for multi-rack systems,
covering distances of up to 700 feet from the CPU. GE offers standard length cables for
easy installation and provides wiring information for custom applications.
IC693CHS391
IC693CHS392
IC693CHS393
IC693CHS397
IC693CHS398
IC693CHS399
Product Name
10-slot CPU
Baseplate
(Model 331
and above)
10-slot
Expansion
Baseplate
(Model 331
and above)
10-slot Remote
Baseplate
(Model 331
and above)
5-slot CPU
Baseplate
(Model 331
and above)
5-slot Expansion
Baseplate
(Model 331
and above)
5-slot Remote
Baseplate
(Model 331
and above)
Lifecycle Status
Active
Active
Active
Active
Active
Active
Module Type
CPU I/O Base
Expansion I/O Base Expansion I/O Base
CPU I/O Base
Expansion I/O Base Expansion I/O Base
Main (With
CPU Slot)
Expansion
Expansion
Main (With
CPU Slot)
Expansion
Expansion
Distance
N/A
Up to 50 feet
Up to 700 feet
N/A
Up to 50 feet
Up to 700 feet
Number of Slots
10
10
10
5
5
5
17.44 x 5.12 x 5.59
(443 x 130 x 142)
17.44 x 5.12 x 5.59
(443 x 130 x 142)
17.44 x 5.12 x 5.59
(443 x 130 x 142)
10.43 x 5.12 x 5.59
(245 x 130 x 142)
10.43 x 5.12 x 5.59
(245 x 130 x 142)
10.43 x 5.12 x 5.59
(245 x 130 x 142)
420 mA @ 5 VDC
150 mA @ 5 VDC
460 mA @ 5 VDC
270 mA @ 5 VDC
170 mA @ 5 VDC
480 mA @ 5 VDC
Baseplate Option
Dimension (W x H x D) in. (mm)
Internal Power Used
1.88
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Power Supplies
The Series 90-30 power supply modules simply snap in just like I/O, and they work with any
model CPU. Each version provides auto-ranging so there is no need to set jumpers for different incoming power levels, and they are current limiting so a direct short will shut the power
supply down to avoid damage to the hardware. Series 90-30 power supplies are tied into
the performance of the CPU for simplex, fail-safe, and fault tolerance. Advanced diagnostics
and built-in smart switch fusing are among the other performance and safety features.
IC693PWR321
IC693PWR330
IC693PWR331
IC693PWR332
Product Name
Power Supply,
120/240 VAC, 125 VDC
Power Supply,
120/240 VAC, 125 VDC
Power Supply,
24 VDC
Power Supply,
12 VDC
Lifecycle Status
Active
Active
Active
Active
Module Type
Power Supply
Power Supply
Power Supply
Power Supply
Power Source
100-240 VAC or 125 VDC
100-240 VAC or 125 VDC
24 VDC
12 VDC
High Capacity
No
Yes
Yes
Yes
Output Source
30 watts total; 15 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
30 watts total; 30 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
30 watts total; 30 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
30 watts total; 30 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
Number of Redundant
Power Supplies Supported
N/A
N/A
N/A
N/A
Cable Length to Redundant
Power Supply Adapter
N/A
N/A
N/A
N/A
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.89
Series 90-30
Programmable Controllers
Power Supplies
The Series 90-30 power supply modules simply snap in just like I/O, and they work with any
model CPU. Each version provides auto-ranging so there is no need to set jumpers for different incoming power levels, and they are current limiting so a direct short will shut the power
supply down to avoid damage to the hardware. Series 90-30 power supplies are tied into
the performance of the CPU for simplex, fail-safe, and fault tolerance. Advanced diagnostics
and built-in smart switch fusing are among the other performance and safety features.
IC693PWR328
Product Name
Power Supply, 48 VDC
Lifecycle Status
Active
Module Type
Power Supply
Power Source
48 VDC
High Capacity
No
Output Source
30 watts total; 15 watts 5 V;
15 watts 24 V relay;
20 watts 24 V isolated
Number of Redundant
Power Supplies Supported
N/A
Cable Length to Redundant
Power Supply Adapter
N/A
1.90
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Discrete I/O Modules (Input)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC693ACC300
IC693MDL230
IC693MDL250
IC693MDL231
IC693MDL240
Product Name
DC Voltage Input Simulator,
8/16 Points
AC Voltage Input Module,
120 VAC Isolated,
8 Point Input
AC Voltage Input Module,
120 VAC Isolated,
16 Point Input
AC Voltage Input Module,
240 VAC Isolated,
8 Point Input
AC Voltage Input Module,
120 VAC,
16 Point Input
Lifecycle Status
Active
Active
Active
Active
Active
Module Type
Input Simulator
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Power Type
DC
AC
AC
AC
AC
Input Voltage Range
N/A
0-132 VAC
0-132 VAC
0-264 VAC
0-132 VAC
Input Current (mA)
N/A
14.5
14.5
15
12
Number of points
16
8
16
8
16
20 on/30 off
30 on/45 off
30 on/45 off
30 on/45 off
30 on/45 off
Trigger Voltage
N/A
74-132
74-132
148-264
74-132
Points per Common
16
1
1
1
16
Toggle Switches
Terminal Block (20 screws),
included with module.
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
120 mA @ 5 VDC
60 mA @ 5 VDC
60 mA @ 5 VDC
60 mA @ 5 VDC
90 mA @ 5 VDC
Response Time (ms)
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.91
Series 90-30
Programmable Controllers
Discrete I/O Modules (Input)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC693MDL260
IC693MDL241
IC693MDL632
IC693MDL634
IC693MDL645
Product Name
AC Voltage Input Module,
120 VAC, 32 Point Input
AC/DC Voltage Input
Module, 24 VAC/VDC
DC Voltage Input Module,
125 VDC Pos/Neg Logic,
8 Point Input
DC Voltage Input Module,
24 VDC Pos/Neg Logic,
8 Point Input
DC Voltage Input Module,
24 VDC Pos/Neg Logic,
16 Point Input
Lifecycle Status
Active
Active
Active
Active
Active
Module Type
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Power Type
AC
Mixed
DC
DC
DC
0-132 VAC
0-30 VDC
0-150 VDC
0-30 VDC
0-30 VDC
Input Current (mA)
12
7
4.5
7
7
Number of points
32
16
8
8
16
30 on/45 off
12 on/28 off
7 on/7 off
7 on/7 off
7 on/7 off
74-132
11.5-30
90-150
11.5-30
11.5-30
32
16
4
8
16
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
90 mA @ 5 VDC
80 mA @ 5 VDC;
125 mA @ 24 VDC Isolated
40 mA @ 5 VDC
45 mA @ 5 VDC;
62 mA @ 24 VDC Isolated
80 mA @ 5 VDC;
125 mA @ 24 VDC Isolated
Input Voltage Range
Response Time (ms)
Trigger Voltage
Points per Common
Connector Type
Internal Power Used
1.92
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Discrete I/O Modules (Input)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC693MDL646
IC693MDL648
IC693MDL654
IC693MDL655
IC693MDL660
Product Name
DC Voltage Input Module,
24 VDC Pos/Neg Logic, FAST,
16 Point Input
DC Voltage Input Module,
48 VDC Pos/Neg Logic,
FAST, 16 Point Input
DC Voltage Input Module,
5/12 VDC (TTL) Pos/Neg
Logic, 32 Point Input
DC Voltage Input Module,
24 VDC Pos/Neg Logic,
32 Point Input
DC Voltage Input Module,
24 VDC Pos/Neg Logic,
32 Point Input
Lifecycle Status
Active
Active
Active
Active
Active
Module Type
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Discrete Input
Power Type
DC
DC
DC
DC
DC
0-30 VDC
0-60 VDC
0-15 VDC
0-30 VDC
0-30 VDC
Input Current (mA)
7
4.2
3.0 @ 5 V, 8.5 @ 12 V
7
7
Number of points
16
16
32
32
32
1 on/1 off
1 on/1 off
1 on/1 off
2 on/2 off
0.5ms, 1.0ms, 2.0ms, 5ms,
10ms, 50ms and 100ms,
selectable per module.
On and off.
11.5-30
34 - 60
4.2-15
11.5-30
11.5-30
16
16
8
8
8
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Fujitsu Connector
Fujitsu Connector
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
80 mA @ 5 VDC;
125 mA @ 24 VDC Isolated
80 mA @ 5 VDC;
125 mA @ 24 VDC Isolated
5 VDC - 195 mA @ 5 VDC;
12 VDC - 440 mA @ 5 VDC
195 mA @ 5 VDC
300 mA @ 5 VDC
Input Voltage Range
Response Time (ms)
Trigger Voltage
Points per Common
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.93
Series 90-30
Programmable Controllers
Analog I/O Modules (Input)
GE offers easy-to-use analog modules for control processes such as flow, ­temperature
and pressure.
IC693ALG220
IC693ALG221
IC693ALG222
IC693ALG223
Product Name
Analog Input, Voltage,
4 Channel
Analog Input, Current,
4 Channel
Analog Input, Voltage,
High Density
(16 Channel)
Analog Input, Current,
High Density
(16 Channel)
Lifecycle Status
Active
Active
Active
Active
Analog Input
Analog Input
Analog Input
Analog Input
1500 volts RMS field
to logic side
1500 volts RMS field
to logic side
1500 volts RMS field
to logic side
1500 volts RMS field
to logic side
-10 V to +10 V
4-20 mA, 0-20 mA
-10 V to +10 V, 0 to 10 V
0-20 mA, 4-20 mA
4
4
16
16
4 ms all channels
2 ms all channels
13 ms all channels
13 ms all channels
12 bit; 5 mV/20 µA/bit
12 bit; 0-20 mA, 5 µA/bit;
4-20 mA, 4 µA/bit
12 bit; ±10 V, 5 mV/20 µA/bit;
0-10 V, 5 mV/20 µA/bit
12 bit; 0-20 mA, 5 µA/bit;
4-20 mA, 4 µA/bit;
4-20 mA Enhanced, 5µA/bit
±10 mV/40 µA at 25ºC (77ºF)
0.1 % full scale
0.25% at 25ºC (77ºF)
0.25% at 25ºC (77ºF)
>9 Megohms
250 ohms
250 ohms
250 ohms
17 Hz
325 Hz
200 Hz
200 Hz
Terminal Block (20 screws), included
with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
27 mA @ 5 VDC;
98 mA 24 VDC Isolated
25 mA @ 5 VDC;
100 mA @ 24 VDC Isolated
112 mA @ 5 VDC;
4150 mA -User Supplied 24 VDC
120 mA @ 5 VDC;
65 mA-User Supplied 24 VDC
Module Type
Isolation
Range
Number of Channels
Update Rate
Resolution
Accuracy
Input Impedance
Input Filter Response
Connector Type
Internal Power Used
1.94
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Analog I/O Modules (Input)
GE offers easy-to-use analog modules for control processes such as flow, ­temperature
and pressure.
HE693ADC410
HE693ADC420
Isolated Analog Input Module,
Voltage, 1500 VAC, Isolation
Isolated Analog Input Module,
Current, 1500 VAC, Isolation
Active
Active
Analog Input
Analog Input
±10 V
4-20 mA, ±20 mA
4
4
1500 VAC (RMS), ±2000 VDC
1500 VAC (RMS), ±2000 VDC
1 Megohm
100 ohms
Integrating, 18 bits
Integrating, 18 bits
13 bits plus sign
13 bits plus sign
I/O Required
4 %AI, 4 %AQ, 16 %I
8 %AI, 8 %AQ, 16 %I
Sample Rate
45 channels/second
45 channels/second
Analog Filtering
1 KHz, 3 pole Bessel
1 KHz, 3 pole Bessel
Digital Filtering
1-128 samples/update
1-128 samples/update
Maximum Error
.05% full scale
.05% full scale
1500 VAC (RMS), ±2000 VDC
1500 VAC (RMS), ±2000 VDC
>100 dB
>100 dB
0.7 W @ 5 V, 1.2 W @ 24 V
0.7 W @ 5 V, 1.2 W @ 24 V
Terminal Block (20 screws), included with module.
Terminal Block (20 screws), included with module.
140 mA @ 5 VDC ; 50 mA @ 24 VDC Relay
140 mA @ 5 VDC; 50 mA @ 24 VDC Relay
Product Name
Lifecycle Status
Module Type
Range
Number of Channels
Channel-to-Channel Isolation
Input Impedance
A/D Type, Resolution
Useable Resolution
Common Mode Range
Common Mode Rejection
Power Consumption at Steady State,
Maximum
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.95
Series 90-30
Programmable Controllers
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
Product Name
Lifecycle Status
Power Type
IC693MDL310
IC693MDL330
IC693MDL340
IC693MDL390
IC693MDL350
IC693MDL730
AC Voltage Output
Module, 120 VAC,
0.5 A, 12 Point Output
AC Voltage Output
Module, 120/240 VAC,
1 A, 8 Point Output
AC Voltage Output
Module, 120 VAC,
0.5 A, 16 Point Output
AC Voltage Output
Module, 120/240 VAC
Isolated,
2 A, 5 Point Output
AC Voltage Output
Module, 120 VAC
Isolated,
2 A, 16 Point Output
DC Voltage Output
Module, 12/24 VDC
Positive Logic,
2 A, 8 Point Output
Discontinued
Active
Active
Active
Active
Active
AC
AC
AC
AC
AC
DC
85-132 VAC
85-264 VAC
85-132 VAC
85-264 VAC
74-264 VAC
12-24 VDC
Number of Points
12
8
16
5
16
8
Isolation
N/A
N/A
N/A
Yes
Yes
N/A
0.5 A
1.0 A
0.5 A
2.0 A
Per Point 2A max. @
30°C & 1A max. @ 60°C
(Linear derating)
2.0 A
1 on 1/2 cy off
1 on 1/2 cy off
1 on 1/2 cy off
1 on 1/2 cy off
1 on 1/2 cy off
2 on/2 off
Output Type
Triac
Triac
Triac
Triac
Triac
Transistor
Polarity
N/A
N/A
N/A
N/A
N/A
Positive
6
4
4
1
1
8
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block
(20 screws),
included with module.
210 mA @ 5 VDC
160 mA @ 5 VDC
315 mA @ 5 VDC
110 mA @ 5 VDC
110 mA @ 5 VDC
55 mA @ 5 VDC
Output Voltage Range
Load Current
per Point
Response Time (ms)
Points per Common
Connector Type
Internal Power Used
1.96
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
Product Name
Lifecycle Status
Power Type
IC693MDL731
IC693MDL732
IC693MDL733
IC693MDL734
IC693MDL740
IC693MDL741
DC Voltage Output
Module, 12/24 VDC
Negative Logic,
2 A, 8 Point Output
DC Voltage Output
Module, 12/24 VDC
Positive Logic,
0.5 A, 8 Point Output
DC Voltage Output
Module, 12/24 VDC
Negative Logic,
0.5 A, 8 Point Output
DC Voltage Output
Module, 125 VDC
Pos/Neg Logic,
6 Point Output
DC Voltage Output
Module, 12/24 VDC
Positive Logic,
0.5 A, 16 Point Output
DC Voltage Output
Module, 12/24 VDC
Negative Logic,
0.5 A, 16 Point Output
Active
Active
Active
Active
Active
Active
DC
DC
DC
DC
DC
DC
12-24 VDC
12-24 VDC
12-24 VDC
11-150 VDC
12-24 VDC
12-24 VDC
8
8
8
6
16
16
N/A
N/A
N/A
N/A
N/A
N/A
2.0 A
0.5 A
0.5 A
1.0 A
0.5 A
0.5 A
2 on/2 off
2 on/2 off
2 on/2 off
7 on/5 off
2 on/2 off
2 on/2 off
Output Type
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Polarity
Negative
Positive
Negative
Positive/Negative
Positive
Negative
8
8
8
1
8
8
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
55 mA @ 5 VDC
50 mA @ 5 VDC
55 mA @ 5 VDC
90 mA @ 5 VDC
110 mA @ 5 VDC
110 mA @ 5 VDC
Output Voltage Range
Number of Points
Isolation
Load Current
per Point
Response Time (ms)
Points per Common
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.97
Series 90-30
Programmable Controllers
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC693MDL742
IC693MDL748
DC Voltage Output
Module, 12/24 VDC
Positive Logic ESCP,
1 A, 16 Point Output
DC Voltage Output
Module, 48/24 VDC
Positive Logic,
0.5 A, 8 Point Output
Active
Active
Active
DC
DC
12-24 VDC
Number of Points
Isolation
Product Name
Lifecycle Status
Power Type
IC693MDL752
IC693MDL753
IC693MDL754
IC693MDL930
DC Voltage Output
Module, 12/24 VDC
Positive Logic,
0.75 A, with ESCP
protection,
32 Point Output
AC/DC Voltage Output
Module, Relay, N.O., 4
A Isolated,
8 Point Output
Active
Active
Active
DC
DC
DC
Mixed
24-48 VDC
5, 12-24 VDC
12-24 VDC
12-24 VDC
0 to 125 VDC,
5/24/125 VDC nominal
0 to 265 VAC
(47 to 63Hz),
120/240 VAC nominal
16
8
32
32
32
8
N/A
N/A
N/A
N/A
N/A
Yes
1.0 A
0.5 A
0.5 A
0.5 A
0.75 A with ESCP
protection
4.0 A
2 on/2 off
2 on/2 off
0.5 on/0.5 off
0.5 on/0.5 off
0.5 on/0.5 off
15 on/15 off
Transistor
Transistor
Transistor
Transistor
Transistor
Relay
Positive
Positive
Negative
Positive
Positive
N/A
8
8
8
8
16
1
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Fujitsu Connector
Fujitsu Connector
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block
(20 screws),
included with module.
130 mA @ 5 VDC
110 mA @ 5 VDC
260 mA @ 5 VDC
260 mA @ 5 VDC
300 mA @ 5 VDC
6 mA @ 5 VDC;
70 mA @ 24 VDC Relay
DC Voltage Output
DC Voltage Output
Module, 5/24 VDC
Module, 12/24 VDC
(TTL) Negative Logic,
Positive Logic,
0.5 A, 32 Point Output 0.5 A, 32 Point Output
Output Voltage Range
Load Current
per Point
Response Time (ms)
Output Type
Polarity
Points per Common
Connector Type
Internal Power Used
1.98
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
IC693MDL916
IC693MDL931
IC693MDL940
IC693MAR590
IC693MDR390
AC/DC Voltage Output
Module, Relay, N.O.,
4 A Isolated,
16 Point Output
AC/DC Voltage Output
Module, Relay, N.C.
and Form C,
8 A Isolated,
8 Point Out
AC/DC Voltage Output
Module, Relay, N.O.,
2 A, 16 Point Output
AC/DC Voltage
I/O Module,
AC In/Relay Out N.O.
AC/DC Voltage Output
Module, 24 VDC Input,
Relay Output, 8 In/8 Out
Lifecycle Status
Active
Active
Active
Active
Active
Power Type
Mixed
Mixed
Mixed
Mixed
Mixed
5 – 125 VDC,
5/24/125 VDC nominal
5 – 250 VAC
(47 to 63 Hz),
120-240 VAC nominal
0 to 125 VDC,
5/24/125 VDC nominal
0 to 265 VAC
(47 to 63Hz),
120/240 VAC nominal
0 to 125 VDC,
5/24/125 VDC nominal
0 to 265 VAC
(47 to 63Hz),
120/240 VAC nominal
5-250 VAC/5-30 VDC
0 to 125 VDC,
5/24/125 VDC nominal
0 to 265 VAC
(47 to 63Hz),
120/240 VAC nominal
Number of Points
16
8
16
8
8
Isolation
Yes
Yes
N/A
N/A
N/A
4.0 A
8.0 A
2.0 A
2.0 A
2.0 A
10ms maximum
(At nominal voltage
excluding contact bounce)
15 on/15 off
15 on/15 off
30 on/45 off
1 on/1 off
Relay
Relay
Relay
Relay
Relay
N/A
N/A
N/A
N/A
N/A
1
1
4
8
8
IC694TBBx32 or
IC694TBSx32.
Sold Separately.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
300 mA @ 5 VDC
from backplane maximum
6 mA @ 5 VDC;
110 mA @ 24 VDC Relay
7 mA @ 5 VDC;
135 mA @ 24 VDC Relay
80 mA @ 5 VDC;
70 mA @ 24 VDC Relay
80 mA @ 5 VDC;
70 mA @ 24 VDC Relay
Product Name
Output Voltage Range
Load Current
per Point
Response Time (ms)
Output Type
Polarity
Points per Common
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
1.99
Series 90-30
Programmable Controllers
Discrete I/O Modules (Output)
Input modules provide the interface between the PLC and external input devices such as
proximity sensors, push buttons, switches, and BCD thumbwheels. Output modules provide
the interface between the PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. GE offers a variety of modules that support
different voltage ranges and types, current capacity, isolation and response time to
meet your application needs.
HE693RLY100
HE693RLY110
DC Voltage Output
Module,
AC In/Relay Out
(isolated)
DC Voltage Output Module,
AC In/Relay Out
(fused)
Lifecycle Status
Active
Active
Power Type
Mixed
Mixed
12-120 VAC,
12-30 VDC
12-120 VAC,
12-30 VDC
8
8
Yes
No
8.0 A
8.0 A
11 on/11 off
11 on/11 off
Relay
Relay
N/A
N/A
1
1
Terminal Block
(20 screws),
included with module.
Terminal Block
(20 screws),
included with module.
180 mA @ 5 VDC;
200 mA @ 24 VDC Relay
180 mA @ 5 VDC;
200 mA @ 24 VDC Relay
Product Name
Output Voltage Range
Number of Points
Isolation
Load Current
per Point
Response Time (ms)
Output Type
Polarity
Points per Common
Connector Type
Internal Power Used
1.100
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Analog I/O Modules (Output)
GE offers easy-to-use analog modules for control processes such as flow, temperature
and pressure.
IC693ALG390
IC693ALG391
IC693ALG392
IC693ALG442
Product Name
Analog Output,
Voltage, 2 Channel
Analog Output,
Current/Voltage,
2 Channel
Analog Current/Voltage
Output, 8 Channel
Analog Current/Voltage
Combination 4 Channel
In/2 Channel Out
Lifecycle Status
Active
Active
Active
Active
Analog Output
Analog Output
Analog Output
Analog Input/Output
1500 volts RMS field
to logic side
1500 volts RMS field
to logic side
1500 volts RMS field
to logic side
1500 volts RMS field
to logic side
-10 V to +10 V, 4-20 mA
1-5 V and 0-5 V, 0-20 mA,
4-20 mA
0 V to +10 V, -10 V to +10 V,
0-20 mA, 4-20 mA
0 V to +10 V, -10 V to +10 V,
0-20 mA, 4-20 mA
2
2
8
4 in/2 out
Channel-to-Channel Isolation
N/A
N/A
N/A
N/A
Diagnostics
N/A
N/A
Open Wire
N/A
5 ms all channels
5 ms all channels
8 ms all channels
8 ms all channels In /
4 ms all channels Out
12 bit; 2.5 mV/bit
12 bit; 0-20 mA, 5µA/bit
16 bit; 0.312 mV/bit
(Input)12 bit; 0 V to 10 V,
2.5 mV/bit; -10 V to +10 V,
5 mV/bit; 0-20 mA,
4-20 mA 5µA/bit (Output) 16 bit;
0.312 mV/bit; 4-20 mA 0.5 µA/bit;
0-20 mA 0.625 µA/bit
±5 mV at 25ºC (77ºF)
0-20 mA, ±8 µA at
25ºC (77ºF); 0-20 mA,
4-20 mA ±0.1% at 25ºC (77ºF)
0-20 mA, 4-20 mA ±0.1% at
25ºC (77ºF); 0-10 V,
-10F + 10 V ±0.25 at 25ºC (77ºF)
(Input) 0.25 % at 25ºC (77ºF)
(Output) 0-20 mA, 4-20 mA ±0.1%
at 25ºC (77ºF)
5 mA (2 K ohms)
5 mA (2 K ohms)
5 mA (2 K ohms)
5 mA (2 K ohms); 850 ohms
Module Type
Isolation
Range
Number of Channels
Update Rate
Resolution
Accuracy
Maximum Output Load
Output Load Capacitance
2000 pF
2000 pF, Inductance 1H
2000 pF, Inductance 1H
2000 pF, Inductance 1H
Power Consumption at
Steady State, Maximum
N/A
N/A
N/A
N/A
User Supplied Loop Voltage
N/A
N/A
N/A
N/A
Maximum Load (ohms)
N/A
N/A
N/A
N/A
Maximum Linearity Error
N/A
N/A
N/A
N/A
Common Mode Isolation
N/A
N/A
N/A
N/A
Connector Type
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Internal Power Used
32 mA @ 5 VDC;
120 mA @ 24 VDC Isolated
30 mA @ 5 VDC;
215 mA 24 VDC Isolated
110 mA @ 5 VDC;
315 mA -User Supplied 24 VDC
95 mA @ 5 VDC;
129 mA 24 VDC Isolated
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.101
Series 90-30
Programmable Controllers
Analog I/O Modules (Output)
GE offers easy-to-use analog modules for control processes such as flow, temperature
and pressure.
HE693DAC410
HE693DAC420
Product Name
Isolated Analog Output
Module, Voltage
Isolated Analog Output
Module, Current
Lifecycle Status
Active
Active
Analog Output
Analog Output
N/A
N/A
±10 V
4-20 mA or 0-20 mA
4
4
1500 VAC (RMS),±2000 VDC
1500 VAC (RMS),±2000 VDC
N/A
N/A
N/A
N/A
13 bits plus sign,
1.2 5mV
13 bits plus sign,
2.0 µA (4-20 mA);
2.5 µA (±20 mA)
N/A
N/A
Maximum Output Load
N/A
N/A
Output Load Capacitance
N/A
N/A
0.75 W @ 5 V;
3.6 W @ 24 V
0.75 W @ 5 V;
3.6 W @ 24 V
N/A
2-32 VDC
>/= 2 Kohms
</= 1.1 Kohms @ 24 V loop voltage
Maximum Linearity Error
0.02% full scale
0.02% full scale
Common Mode Isolation
1500 VAC (RMS),±2000 VDC
1500 VAC (RMS), ±2000 VDC
Connector Type
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
500 mA @ 5 VDC;
150 mA @ 24 VDC Relay
150 mA @ 5 VDC;
110 mA @ 24 VDC Relay
Module Type
Isolation
Range
Number of Channels
Channel-to-Channel Isolation
Diagnostics
Update Rate
Resolution
Accuracy
Power Consumption at
Steady State, Maximum
User Supplied Loop Voltage
Maximum Load (ohms)
Internal Power Used
1.102
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Millivolt I/O Modules
The Millivolt Input Modules allow millivolt level signals, such as bridged strain gages
(load cells) to be directly connected to the PLC without external signal processing
­(transducers, transmitters, etc.) All analog and digital processing of the signal is
performed on the module.
HE693ADC409
Product Name
Analog I/O Module, Millivolt Input
Lifecycle Status
Active
Module Type
Millivolt Input
Input Voltage Range
±25 mV, ±50 mV and ±100 mV
Number of Channels
4
Resolution
3 µV, 6µV, 9µV (respectively)
Accuracy
±0.5%
Input Impedance
>20 Mohms
A/D Conversion Type
Integrating
A/D Conversion Time
35 Channels/second
Strain Gages Supported
Maximum Normal Voltage Input
Maximum Voltage Input
Connector Type
Internal Power Used
www.ge-ip.com
Bridged (load cells)
100 mV
±35 V
Terminal Block (20 screws),
included with module.
100 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions 1.103
Series 90-30
Programmable Controllers
RTD I/O Modules
The RTD Input Modules provide six RTD inputs that allow the direct connection of 3-wire RTD
temperature sensors without using external signal processing (transducers, transmitters,
etc.). All analog and digital processing of the RTD signal is performed on the module.
HE693RTD600
HE693RTD601
HE693RTD660
HE693RTD665
HE693RTD666
Product Name
RTD Input Module,
Low Resolution
RTD Input Module,
High Resolution
RTD Input Module,
Isolated
RTD Input Module,
Isolated
RTD Input Module,
Isolated
Lifecycle Status
Active
Active
Active
Discontinued
Discontinued
RTD Input
RTD Input
RTD Input
RTD Input
RTD Input
6
6
6
6
6
3-wire, Pt-100E, Pt-100C,
Pt-100Z, Pt-1000, Cu-10, Cu-50,
PT-100, Cu-53, Cu-100, Ni-120,
TD5R, TD5R, Pt-90 (MIL-7990)
3-wire, Pt-100E, Pt-100C,
Pt-100Z, Pt-1000, Cu-10,
Cu-50, PT-100, Cu-53,
Cu-100, Ni-120, TD5R,
TD5R, Pt-90 (MIL-7990)
3 wire, Pt-100E, Pt-100C,
Ni-120, Cu-10, Pt-1000,
TD5R Si
3 wire, Pt-100E, Pt-100C,
Ni-120, Cu-10, Pt-1000,
TD5R Si
3 wire, Pt-100E, Pt-100C,
Ni-120, Cu-10, Pt-1000,
TD5R Si
Channel-to-Channel
Isolation
N/A
N/A
5 VAC
5 VAC
5 VAC
Notch Filter
N/A
N/A
None
50 Hz
60 Hz
0.5°C or 0.5°F
0.125°C , 0.1°C, or 0.1°F
0.05°C, 0.05°F, 0.1°C,
0.1°F, 0.5°C or 0.5°F
0.05°C, 0.05°F, 0.1°C,
0.1°F, 0.5°C or 0.5°F
0.05°C, 0.05°F, 0.1°C,
0.1°F, 0.5°C or 0.5°F
±0.5°C, typical
±0.5°C, typical
±0.3°C
±0.3°C
±0.3°C
Input Impedance
>1000 Megohms
>1000 Megohms
>1000 Megohms
>1000 Megohms
>1000 Megohms
Fault Protection
Zener Diode Clamp
Zener Diode Clamp
Suppression Diode
Suppression Diode
Suppression Diode
Update Time
50 Channels/second
50 Channels/second
50 Channels/second
50 Channels/second
50 Channels/second
18 bit, integrating
18 bit, integrating
18 bit, integrating
18 bit, integrating
18 bit, integrating
330 microamps
330 microamps
330 microamps
330 microamps
330 microamps
Channel-to-Channel
Tracking
0.1°C
0.1°C
0.1°C
0.1°C
0.1°C
Channel-to-Bus Isolation
N/A
N/A
1500 VAC
1500 VAC
1500 VAC
RTD Short
N/A
N/A
Indefinite without damage
Indefinite without damage
Indefinite without damage
Module Type
Number of Channels
RTD Types Supported
Resolution
Accuracy
A/D Conversion Type
Average RTD
Current, Pt-100
Connector Type
Internal Power Used
1.104
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws), Terminal Block (20 screws), Terminal Block (20 screws), Terminal Block (20 screws),
included with module.
included with module.
included with module.
included with module.
70 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions
70 mA @ 5 VDC
200 mA @ 5 VDC
200 mA @ 5 VDC
200 mA @ 5 VDC
www.ge-ip.com
Programmable Controllers
Series 90-30
Strain Gage I/O Modules
The Millivolt Input Modules allow millivolt level signals, such as bridged strain gages
(load cells) to be directly connected to the PLC without external signal processing
­(transducers, transmitters, etc.) All analog and digital processing of the signal is
performed on the m
­ odule.
HE693STG883
HE693STG884
Product Name
Analog I/O Module, Strain Gage
Analog I/O Module, Strain Gage
Lifecycle Status
Active
Active
Strain Gage Input
Strain Gage Input
Input Voltage Range
±20 mV, ±25 mV and ±30mV
±25 mV, ±50 mV and ±100mV
Number of Channels
8
8
Resolution
0.6 µV, 0.8 µV, 0.9 µV
(respectively)
0.8 µV, 1.6 µV, 3.2 µV
(respectively)
Accuracy
±0.3%
±0.3 %
>1000 Mohms
>1000 Mohms
A/D Conversion Type
Integrating
Integrating
A/D Conversion Time
35 Channels/second
35 Channels/second
Bridged (load cells)
Bridged (load cells)
100 mV
100 mV
±35 V
±35 V
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws), included with
module.
60 mA @ 5 VDC;
30 mA @ 24 VDC Relay
60 mA @ 5 VDC;
30 mA @ 24 VDC Relay
Module Type
Input Impedance
Strain Gages Supported
Maximum Normal
Voltage Input
Maximum Voltage Input
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.105
Series 90-30
Programmable Controllers
Temperature Control Modules
The Temperature Control Module (TCM), is a high performance control module providing
eight channels of thermocouple input and eight channels of control output in a single Series
90-30 module. Each channel can operate in closed or open loop mode relieving the PLC of
providing the temperature control functions. The module also supports Autotuning.
IC693TCM302
IC693TCM303
Product Name
Temperature Control Module,
(8) T/C, (1) RTD and (8) 24 VDC Output
Temperature Control Module,
Extended Range, 8 T/C,
1RTD and 8 24 VDC Output
Lifecycle Status
Mature
Mature
Thermocouple Input
Thermocouple Input
8 channels (Type J, K or L); J=0-450ºC;
K=0 -600ºC; L=0-450ºC;
1 internal/external compensation
channel, 12-bits or 0.2ºC resolution,
100 ms/ channel update,
±1ºC accuracy with
automatic calibration
8 channels (Type J, K or L);
J=0-600ºC; K=0 -1050ºC; L=0-600ºC;
1 internal/external compensation
channel, 12-bits or 0.2ºC resolution,
100 ms/ channel update,
±1ºC accuracy with
automatic calibration
RTD Input
1 channel with Open/Short Circuit
Detection; Type: Pt-100 (µ=0.00392)
for temperature compensation
1 channel with Open/Short Circuit
Detection; Type: Pt-100 (µ=0.00392)
for temperature compensation
Temperature Range
J=0-600ºC, K=0-1050ºC, L=0-600ºC
J=0-450ºC, K=0-600ºC, L=0-450ºC
Output Voltage Range
18 to 30 volts DC
18 to 30 volts DC
Load Current per point
100 mA maximum sourcing
100 mA maximum sourcing
8 T/C In / 8 DC Out
8 T/C In / 8 DC Out
Open thermocouple and reverse connection
detection capability; Detection and indication of
out-of-tolerance temperature readings
Open thermocouple and reverse connection
detection capability; Detection and indication of
out-of-tolerance temperature readings
Two 20 pin connectors (screw type)
Two 20 pin connectors (screw type)
150 mA @ 5 VDC
150 mA @ 5 VDC
Module Type
Thermocouples
Number of Channels
Diagnostics
Connector Type
Internal Power Used
1.106
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Thermocouple I/O Modules
The Thermocouple Input Modules allow thermocouple temperature sensors to be directly
connected to the PLC with external signal processing (transducers, transmitters, etc.). The
module performs all analog and digital processing of the thermocouple signal. The
enhanced thermocouple input modules add isolation or high-resolution. On these modules,
each channel can be configured for a specific type of sensor wire. An autodetect external
AD592 cold junction compensation feature is also available.
HE693THM166
HE693THM409
HE693THM449
Product Name
Analog I/O Thermocouple
Input Module
Analog I/O Thermocouple
Input Module
Analog I/O Thermocouple
Input Module
Lifecycle Status
Active
Active
Active
Thermocouple Input
Thermocouple Input
Thermocouple Input
J, K, N, T, E, R, S, B, C, X
J, K, N, T, E, R, S
J, K, N, T, E, R, S
Number of Channels
16
4
4
Channel-to-Channel Isolation
N/A
N/A
N/A
Notch Filter
N/A
N/A
N/A
Open Circuit Alarm
Yes
No
Yes
Resolution
0.5°C or 0.5°F
0.5°C or 0.5°F
0.5°C or 0.5°F
Accuracy
±0.5°C, typical (J,K,N,T)
±0.5°C, typical (J,K,N,T)
±0.5°C, typical (J,K,N,T)
A/D Conversion Type
Integrating
Integrating
Integrating
A/D Conversion Time
40 Channels/second
40 Channels/second
40 Channels/second
Open Circuit Detection
Yes
Yes
Yes
Setpoint Alarm
N/A
N/A
N/A
Open Circuit Detection
Open Circuit Detection
Open Circuit Detection
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
80 mA @ 5 VDC;
30 mA @ 24 VDC Relay
80 mA @ 5 VDC;
60 mA @ 24 VDC Relay
80 mA @ 5 VDC;
60 mA @ 24 VDC Relay
Module Type
Range
Diagnostics
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.107
Series 90-30
Programmable Controllers
Thermocouple I/O Modules
The Thermocouple Input Modules allow thermocouple temperature sensors to be directly
connected to the PLC with external signal processing (transducers, transmitters, etc.). The
module performs all analog and digital processing of the thermocouple signal. The
enhanced thermocouple input modules add isolation or high-resolution. On these modules,
each channel can be configured for a specific type of sensor wire. An autodetect external
AD592 cold junction compensation feature is also available.
HE693THM809
HE693THM884
HE693THM888
HE693THM889
Product Name
Analog I/O Thermocouple
Input Module
Analog I/O Thermocouple
Input Module (Enhanced)
Analog I/O Thermocouple
Input Module (Enhanced)
Analog I/O Thermocouple
Input Module
Lifecycle Status
Active
Active
Active
Active
Thermocouple Input
Thermocouple Input
Thermocouple Input
Thermocouple Input
J, K, N, T, E, R, S
J, K, N, T, E, R, S, B, C
J, K, N, T, E, R, S, B, C
J, K, N, T, E, R, S
8
8
8
8
Channel-to-Channel Isolation
N/A
N/A
N/A
N/A
Notch Filter
N/A
None
60 Hz
N/A
Open Circuit Alarm
No
Yes
Yes
Yes
Resolution
0.5°C or 0.5°F
N/A
N/A
0.5°C or 0.5°F
Accuracy
±0.5°C, typical (J,K,N,T)
N/A
N/A
±0.5°C, typical (J,K,N,T)
A/D Conversion Type
Integrating
N/A
N/A
Integrating
A/D Conversion Time
40 Channels/second
N/A
N/A
40 Channels/second
Open Circuit Detection
Yes
Yes
Yes
Yes
Setpoint Alarm
N/A
Yes
Yes
N/A
Module Type
Range
Number of Channels
Diagnostics
Connector Type
Internal Power Used
1.108
Open Circuit Detection
Open Circuit Detection and Alarms Open Circuit Detection and Alarms
Open Circuit Detection
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
80 mA @ 5 VDC;
60 mA @ 24 VDC Relay
100 mA @ 5 VDC;
60 mA @ 24 VDC Relay
100 mA @ 5 VDC;
60 mA @ 24 VDC Relay
80 mA @ 5 VDC;
60 mA @ 24 VDC Relay
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Networks and Distributed I/O Systems
The Series 90-30 features a variety of communications options for distributed control
and/or I/O. Choose from Ethernet EGD, Profibus-DP, Genius, DeviceNet, Interbus-S, Series 90
Protocol (SNP) and RTU modules. These communication modules are easy to install and
quick to configure.
IC693PBM200
IC693PBS201
IC693BEM331
Product Name
Communications Module,
Profibus-DP Module (Master)
Communications Module,
Profibus-DP Module (Slave)
Series 90-30 I/O Bus Module,
Genius Bus Controller
Lifecycle Status
Active
Active
Active
Profibus-DP Master
Profibus-DP Slave
Genius Bus Controller
Profibus DP
Profibus DP
Genius
Entity Type
Master
Slave
Master
Bus Speed
12Mbaud
12Mbaud
153.6Kbaud
Baud Rate Dependent.
Supports all standard
data rates (9.6 kBit/s, 19.2 kBit/s,
93.75 kBit/s, 187.5 kBit/s,
500 kBit/s, 1.5 MBit/s, 3 MBit/s,
6 MBit/s and 12 MBit/s)
Baud Rate Dependent.
Supports all standard
data rates (9.6 kBit/s, 19.2 kBit/s,
93.75 kBit/s, 187.5 kBit/s,
500 kBit/s, 1.5 MBit/s, 3 MBit/s,
6 MBit/s and 12 MBit/s)
7500 feet (2286 meters) at 38.4 Kbaud;
4500 feet (1371 meters) at 76.8 Kbaud;
3500 feet (1066 meters) at 153.6 Kbaud
extended; 2000 feet (609 meters)
at 153.6 Kbaud standard.
Maximum length at each baud
rate also depends on cable type.
Supported
Supported
Supported
Module Type
Protocol Support
Network Distance
Bus Diagnostics
Number of Drops Supported
Message Size
Internal Power Used
www.ge-ip.com
125 Slaves
One
32
244 bytes of input and
244 bytes of output for
each slave. Not to exceed
3584 bytes input and
3584 bytes outputs
total for the system.
244 bytes of input and
244 bytes of output
255 bytes
450 @ 5 VDC
450 @ 5 VDC
300 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions 1.109
Series 90-30
Programmable Controllers
Networks and Distributed I/O Systems
The Series 90-30 features a variety of communications options for distributed control
and/or I/O. Choose from Ethernet EGD, Profibus-DP, Genius, DeviceNet, Interbus-S, Series 90
Protocol (SNP) and RTU modules. These communication modules are easy to install and
quick to configure.
IC693DNM200
IC693DNS201
IC693CMM302
Product Name
Series 90-30 Communications
Module, DeviceNet, Master
Series 90-30 Communications
Module, DeviceNet, Slave
Series 90-30 Enhanced Genius
Communications Module
Lifecycle Status
Active
Active
Active
DeviceNet Master
DeviceNet Slave
Genius Peer to Peer
DeviceNet
DeviceNet
N/A
Master
Slave
Peer-to-Peer
Module Type
Protocol Support
Entity Type
Bus Speed
Network Distance
Bus Diagnostics
Number of Drops Supported
500Kbaud
500Kbaud
153.6Kbaud
500Kbaud 100 meters to 125Kbaud
500 meters. Maximum length
at each baud rate also depends
on cable type.
500Kbaud 100 meters to 125Kbaud
500 meters. Maximum length
at each baud rate also depends
on cable type.
7500 feet (2286 meters) at 38.4 Kbaud;
4500 feet (1371 meters) at 76.8 Kbaud;
3500 feet (1066 meters) at 153.6 Kbaud
extended; 2000 feet (609 meters)
at 153.6 Kbaud standard. Maximum
length at each baud rate also
depends on cable type.
Supported
Supported
N/A
64
N/A
N/A
3972 bytes Input and
3972 bytes Output
255 bytes In and
255 bytes Out
N/A
450 @ 5 VDC
450 @ 5 VDC
300 mA @ 5 VDC
Message Size
Internal Power Used
1.110
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Networks and Distributed I/O Systems
The Series 90-30 features a variety of communications options for distributed control
and/or I/O. Choose from Ethernet EGD, Profibus-DP, Genius, DeviceNet, Interbus-S, Series 90
Protocol (SNP) and RTU modules. These communication modules are easy to install and
quick to configure
IC693BEM320
IC693BEM321
Product Name
Series 90-30 Communication,
I/O Link Interface Module (Slave)
Series 90-30 Communication,
I/O Link Interface Module (Master)
Lifecycle Status
Active
Active
I/O Link
I/O Link
N/A
N/A
Slave
Master
Module Type
Protocol Support
Entity Type
Bus Speed
1.5 mHz
1.5 mHz
10 meters (33 feet) RS-485;
200 meters (660 feet)
10 meters (33 feet) RS-485;
200 meters (660 feet)
Bus Diagnostics
N/A
N/A
Number of Drops Supported
N/A
N/A
Message Size
N/A
N/A
205 mA @ 5 VDC
415 mA @ 5 VDC
Network Distance
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.111
Series 90-30
Programmable Controllers
Serial Communications Modules
The Series 90-30 features a variety of communications options for distributed control
and/or I/O. Choose from Ethernet EGD, Profibus-DP, Genius, DeviceNet, Interbus-S, Series 90
Protocol (SNP) and RTU modules. These communication modules are easy to install and
quick to configure.
IC693CMM311
HE693SNP900
HE693RTM705
Product Name
Series 90-30 Communications
Control Module
Communications Module,
SNP Slave Module from
Horner Electric
Communications Module,
Modbus RTU Master from
Horner Electric
Lifecycle Status
Discontinued
Active
Discontinued
Serial Communications
Module Type
SNP Module
Modbus RTU Master
Protocol Support
SNP/SNPX; CCM;
Modbus RTU Slave
SNP Slave
Modbus Master support
Report by Exception
Communication Ports
1 RS-232, 1 RS-485
RS-232, RS-232/485
RS-232, RS-232/485, modem
N/A
No Restrictions
Restricted to IC693CHS391
and IC693CHS397
400 mA @ 5 VDC
250 mA @ 5 VDC
375 mA @ 5 VDC
Backplane Compatibility
Internal Power Used
1.112
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Power Measurement Modules
The Power Transducer Module (PTM) and Power Synchronization and Measurement (PSM) module
measure and calculate critical data for control of electrical power systems and synchronization of
power grids. Both the PTM and PSM connect to user supplied current and potential transformers,
which translate power grid signals to proportionate, low-level signals for measurement and analysis.
The PTM module is not intended to provide a protective relay function or be used for energy billing
purposes. The PSM module provides ANSI protective relay calculations and revenue grade monitoring for a complete genset, paralleling switchgear or infrastructure management solution. Both the
PTM and PSM consist of a processing module that plugs into the PLC backplane, an interface module
for field wiring connections, and cables to interconnect the two modules. The PTM and PSM can be
used with Wye or Delta type three-phase power or with single-phase power systems.
IC693PTM101
Product Name
Power Transducer Module Processing Module interface
board (a panel mounted circuit board). This board interfaces between
the Power Transducer module and the input transformers (current
and potential), 1.0 meter Interface cable that connects the module
to the Interface board.
Lifecycle Status
Mature
Module Type
Power Transducer Modules
Input Voltage Range
Power Measurement
Configurations
Current Input Range
Frequency Range
Output Rating
Number of Outputs
10-120 VAC (nominal)
GridsCircuits
10
0
up to 4
0 to 7.5 Amps RMS (5 A RMS nominal)
35Hz to 70Hz
N/A
0
Data availability
• Data calculation rate: 20ms @ 50Hz, 16.67ms @ 60Hz
• Data latency: 15ms @ 50Hz, 16.67ms @ 60Hz
Data
Measured Data
• RMS voltage of phase A, B, and C (in Volts x 10)
• RMS currents of phase A, B, C, and Neutral (in Amperes x 1000) for each
grid
• DC component of measured RMS voltages (in Volts x 10)
• Frequency of phase A grid 1 (in Hz x 100)
• Phase angle between phase A grid 1 and phase A grid 2
(in degrees x 10)
Power and Energy Data
• Active and reactive power reported per phase and total in Watts, VoltAmperes-Reactive (VAR)
• Active and reactive total energy consumption in Watt-Seconds and
Volt-Amperes-Reactive-Seconds (updated once per second), re-settable
by the user
• Total power factor
• Average real and reactive power consumption (sliding 15 minute
window updated once per second)
Status and Diagnostics
Internal Power Used
www.ge-ip.com
• Module Heartbeat (indicates module health)
• Utility Phase A voltage present
• Phase polarity valid
• Voltage measurements valid
• Current measurements valid
400 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions 1.113
Series 90-30
Programmable Controllers
Pneumatic Module
This IC693MDL760 output module provides eleven pneumatic outputs and five 24 VDC sourcing outputs. For each pneumatic output, the module contains an internal 3-way solenoid-actuated valve
and an associated output fitting, which is located on the front panel. When an output is turned ON,
its internal valve connects a user supplied pressure source (100 psi maximum) to the output fitting.
The pressure source is connected to the fitting on the bottom of the module. When the output is
turned OFF, the valve’s output port is vented to atmosphere inside the module. Solenoid power is
supplied from an external 24 VDC source to the “DC Outputs” connector on the front panel.
IC693MDL760
Product Name
Series 90-30 Solenoid Module
Lifecycle Status
Number of Points
Active
(11) Pneumatic Outputs
(5) 24 VDC Outputs
Pneumatic Outputs
11
Supply Pressure
Pressure Drop
External Solenoid Power
100 PSI
25 psi [email protected] 0.25 scfm
21.6-26.4 VDC, 24 VDC nominal
ON Response Time/Off
Response Time
12 ms max. ON
12 ms max. OFF
Solenoid Inrush Current
33 mA/valve @ 24 VDC
Solenoid Holding Current
13 mA/valve @ 24 VDC
Output Fitting
Threaded for 10-32 adapter,
1/16” hose barb provided
Supply Fitting
Threaded for 10-32 adapter,
1/8” hose barb provided
Load Current per Point
0.5 A @ 30 VDC per point,
2.0 A total for all five points
Response Time (ms)
Output Type
Polarity
Transistor
Positive
Internal Power Used
1.114
0.5 on/0.5 off
75 mA from 5 VDC bus
(solenoid LEDs are powered
from external power source)
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Programmable Coprocessor Modules
GE Series 90-30’s feature a wide range of Specialty Modules to meet all of your application
needs. From temperature controls, high-speed counters, I/O processors, coprocessors, to
PID auto-tuning modules, these Specialty Modules are designed to meet the demand for
versatile industrial solutions.
Product Name
Lifecycle Status
Module Type
Programming Languages
Program Storage
Communication Ports
Backplane Compatibility
Internal Power Used
www.ge-ip.com
IC693PCM311
IC693PCM301
HE693ASC900
Series 90-30,
Programmable Coprocessor
Module, 640 KB
(190 KB Basic Prgm)
Series 90-30,
Programmable Coprocessor
Module, 192 KB
(47 KB Basic Prgm)
Horner ASCII
Basic Module
Discontinued
Discontinued
Active
Programmable
Coprocessor Module
Programmable
Coprocessor Module
Co-Processor ASCII
Basic Module
BASIC or C
BASIC or C
BASIC
640K of Battery Backed RAM
192K of Battery Backed RAM or EPROM option
64K EEPROM
(2) One RS-232 and
one RS-232/RS-485
(2) One RS-232 and
one RS-232/RS-485
RS-232, RS-232/485
Restricted to IC693CHS391
and IC693CHS397
Restricted to IC693CHS391
and IC693CHS397
No Restrictions
400 mA @ 5 VDC
425 mA @ 5 VDC
375 mA @ 5 VDC
GE Intelligent Platforms Control Systems Solutions 1.115
Series 90-30
Programmable Controllers
Motion Modules (High Speed Counting)
Motion control integrated into the Series 90-30 fosters high performance point-to-point
applications. GE Motion Control modules can be flexibly applied to a variety of digital,
analog, and stepper motion applications.
IC693APU300
IC693APU305
Product Name
Series 90-30
High Speed Counter
Series 90-30
I/O Processor Module
Lifecycle Status
Active
Active
High Speed Counter
I/O Processor Module
High Frequency - 80 kHz;
Low Frequency - 20 Hz
30 khz (Absolute Encoder)
200 khz (A Quad B Encoder)
Positive Logic
N/A
10 µA per point
10 µA per point
Output Protection
3 Amp Fuse for all points
5 A Fuse for all points
N/A
Counter Operation
Type A - Up or Down-Independent
Pulse-4 counters; Type B - Both
Directions-A QUAD B Encoder Inputs-2
Counters; Type C - Difference Between
2 changing values-A QUAD B Encoder
Inputs -1 Counter
High Frequency Filter - 2.5 µS;
Low Frequency Filter - 12.5 ms
N/A
Selectable On/Off
Output Presets
Each Counter has 2 present points,
On and Off
N/A
N/A
Counters per Timebase
Each counter stores the number
of counts that have occurred
in a specified time. A timebase
value measurement from
1 ms to 65535 ms is configurable.
N/A
Strobe Register
Each counter has one or more
strobe registers that capture the
current accumulator value when a
strobe input transition in the
direction selected during the last
configuration of the module.
(12) 5 VDC or 10 to 30 VDC
(12) 8.0 VDC (non–TTL), 1.5 VDC (TTL)
(4) 10 to 30 VDC @ 500 mA maximum
4.75 to 6 VDC @ 20 mA maximum
Continuous Output Current
(10–30 VDC supply)
1.0 A (each output 1–4)
0.5 A (each output 5°V8)
Terminal Block (20 screws),
included with module.
Terminal Block (20 screws),
included with module.
250 mA @ 5 VDC
360 mA @ 5 VDC
Module Type
Count Rate
Input/Output Type
Off State Leakage Current
Input Filters (Selectable)
Local Fast Inputs
Local Fast Outputs
Connector Type
Internal Power Used
1.116
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Motion Modules (Servo Control)
Motion control integrated into the Series 90-30 fosters high performance point-to-point
applications. GE Motion Control modules can be flexibly applied to a variety of digital,
analog, and stepper motion applications.
IC693DSM324
IC693DSM314
Product Name
Series 90-30 Digital
Servo Module, 4-Axis
Series 90-30 Digital Servo
Module, 4-Axis
(Fiber Optic Interface to Amplifiers)
Lifecycle Status
Active
Active
Servo Module
Servo Module
Beta i Series Digital Servos
Beta i Series Digital and Analog Servos
Fiber Optic, Up to 100 meters
between Amplifiers with total
length of 400 meters.
Digital for Alpha and
Beta Series. ±10V velocity or
torque command for analog
4 Digital
2 Digital and 1 analog or 4 analog
Incremental Master (1Mhz)
Incremental Master (1Mhz)
Parallel or Cascade
Parallel or Cascade
User Memory
15 KBytes
15 KBytes
Analog Inputs
2
4 - In Digital Mode 8 - In Analog Mode
Analog Outputs
2
4 - In Digital Mode 0 - In Analog Mode
Local Fast Inputs
12 (24 V), 8 (5 V)
12 (24 V), 8 (5 V)
4 SSR Outputs (24 VDC, 125 mA)
4 SSR Outputs (24 VDC, 125 mA)
(1) 36 pin (5 VDC) (1) 24 pin (24 VDC)
(4) 36 pin
1360 mA @ 5 VDC
1300 mA @ 5 VDC
Module Type
Drive
Drive Interface
Axes
Encoder Support
Axis Configuration
Local Fast Outputs
Connector Type
Internal Power Used
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.117
Series 90-30
Programmable Controllers
Remote Expansion Modules
The Ethernet distributed I/O interface (Ethernet Interface Unit), is a high performance Ethernet network
interface module. The ENIU enables users to connect Series 90-30 I/O remotely over Ethernet to a
­master controller. The ENIU provides the power of Single Point of Connect. You can connect anywhere
on the I/O network and monitor, configure, and troubleshoot any ENIU. The master controller is also
accessible over the same network to program, troubleshoot and configure. The ENIU features a built-in
Ethernet switch with two 10/100Mbit ports (RJ-45) allowing the user to daisy chain to the next ENIU.
The ENIU automatically senses the cable type, eliminating the need for a crossover cable. The ENIU
­supports one IP address. Redundancy is provided as a standard feature with the ENIU.
IC693NIU004
Product Name
Ethernet Remote I/O Expansion (Slave)
Lifecycle Status
Active
Module Type
Ethernet Remote I/O Interface Module
I/O Discrete Points
2048 Inputs/2048 Outputs maximum
I/O Analog Points
1264 Inputs and 512 Outputs maximum
User Logic Memory
N/A
Network Data Rate
10/100Mbit ports (RJ-45)
Entity Type
Network Distance
Bus Diagnostics
Number of Drops Supported
Slave
Media Dependent
Supported
Network Dependent.
Each Ethernet NIU can also support
up to 7 additional local I/O racks
(IC693CHSxxx)
Internal Power Used
1.118
GE Intelligent Platforms Control Systems Solutions
N/A
www.ge-ip.com
Programmable Controllers
Series 90-30
Portable Program Download Device
(PPDD)
The Portable Program Download Device enables the user
to easily upload and download Series 90-30 configuration
and logic from/to a USB Memory Stick. Portable Program
Download Device (PPDD) will support commercial memory
stick devices using USB connection. The purpose of the
PPDD is to allow users to store and download their logic
applications and configuration to GE Series 90-30 PLCs
without the need of a PC. The PPDD plugs into the 15 pin
RS-485 port on the Series 90-30 CPU base power supply.
The RS-485 port provides the power for the PPDD. Series
90-30 logic and configuration files can be zipped and easily
emailed to remote locations for Series 90-30 downloads.
There are many advantages of the PPDD such as:
• No PC required to backup applications or download applications
• No expensive travel to perform field upgrades, just email the file to the remote location
• Compatible with commercial off the shelf USB Memory Sticks
• The PPDD can be panel mounted, DIN rail mounted or hand held
• Supports diagnostics to ensure that the CPU is compatible with the application
• OEM Password Protection supported
• Simple to operate, LEDs to show activity, error and status. Push button to start download and selector switch for
direction of download, to the PLC or to the memory stick.
• Designed for the industrial environment UL and CE (not Class 1 Div 2 approved)
PPDD features:
• Slide switch for direction of data storage
• Status and Diagnostic LEDs
LEDs Status
LED On Steady
LED Flashing
Fast Flash (500msec on 500msec off)
Slow Flash (1 sec on 1 sec off)
LED Off
www.ge-ip.com
Error (Red)
Status (Green)
On when there isn’t a Memory Stick attached
On after button has been pushed and name in PLC matches and
when download is complete
Flashing when CPU doesn’t match or
Memory Stick doesn’t have the proper file
Slow Flash During Download
Fast Flash when CPU type matches but name in PLC doesn’t match
Flashing if Verify fails
Off during normal conditions with no errors
Off prior to button being pushed for download
GE Intelligent Platforms Control Systems Solutions 1.119
Series 90-30
Programmable Controllers
The Portable Program Download Device is simple to use. The example below
demonstrates the four easy steps of downloading an application and emailing
it to a remote location for application upgrade.
Step 1.
Slide PPDD selector toward USB memory stick. Press
PPDD download button. The PPDD will store/verify
the Series 90-30 application and configuration onto
the USB memory stick.
Step 4.
Place the USB memory stick in the PPDD, slide selector toward
controller. Press PPDD download button. The PPDD will stop
the CPU and download/verify file. The CPU can be placed in
the Run mode via the key switch or cycling power.
Email binary file
Step 2.
Remove the memory stick from the PPDD and connect it
to your PC. Copy the binary file from the memory stick to
your PC and email to remote location.
Step 3.
Remote location takes the binary
file that is in the email and stores
it on a USB memory stick.
Portable Program Download Device
IC690ACC990
1.120
Portable Program Download Device. Supports standard
USB memory devices to store and load Series 90-30
PLC applications without the need of a PC.
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Accessories
IC694TBB032
High Density 32 Point Terminal Block Box Style
Active
IC694TBB132
High Density 32 Point Terminal Block Box Style with Extended Shroud for Large Wiring Bundles
Active
IC694TBS032
High Density 32 Point Terminal Block Spring Style
Active
IC694TBS132
High Density 32 Point Terminal Block Spring Style with Extended Shroud for Large Wiring Bundles
Active
IC690ACC901
Mini-Converter Kit with cable (RS-485/RS-232)
Active
IC690ACC903
RS-485 Port Isolator
Active
IC690CDR002
User Manuals, InfoLink CD-ROM Documentation, single-user license
Active
IC693ACC301
Replacement Battery, CPU & PCM (qty 2)
Active
IC693ACC302
High capacity battery pack. The new Auxiliary Battery Pack (IC693ACC302) will enable Series 90-30 (except CPU374) to go Active
up to 75 months (shelf life of 10 years ) of RAM memory backup w/no power & the CPU374 backup for 15 months
IC693ACC307
I/O Bus Terminator Plug
Active
IC693ACC308
Rack Adaptor Bracket, Series 90-30 10 Slot to 19” (Front Mount)
Active
IC693ACC310
Filler Module, Blank Slot
Active
IC693ACC311
Twenty Point Terminal Blocks (qty 6)
Active
IC200ACC003
EZ Store Device, CPU374 program download without the need of a PC.
Active
IC693ACC319
Spare Plastic Cases Parts Kit (I/O, CPU, PCM)
Active
IC693MLX000
Spare Series 90-30 I/O Modules Label Kit (various quantities)
Active
Terminal Block Quick Connect
Terminal Block Quick Connect (TBQC) for selected I/O modules enables the user to easily connect interposing terminal
blocks. The TBQC consists of an I/O faceplate adapter that includes a 24 pin Fujitsu male connector (the faceplate
replaces the 20 screw terminal connector on front of I/O module, not compatible with the high density 36 screw
terminals), cable and interposing terminal block.
TBQC I/O Module Face Plate Adapter
IC693ACC334
I/O module face plate adapter for 20 screw type I/O modules. Faceplate provides a 24 pin male Fujitsu connector.
Active
TBQC Interposing Terminal Block
IC693ACC329
Interposing terminal block base for IC693MDL645, IC693MDL646, and IC693MDL240. The base can also be used with
any 20 point terminal discrete or analog modules not listed.
Active
IC693ACC330
Interposing terminal block base for IC693MDL740 and IC693MDL742
Discontinued
IC693ACC331
Interposing terminal block base for IC693MDL741
Discontinued
IC693ACC332
Interposing terminal block base for IC693MDL940
Active
IC693ACC333
Interposing terminal block base for IC693MDL340
Active
IC693ACC337
Interposing terminal block base for IC693MDL654/655/752/753
Active
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.121
Series 90-30
Programmable Controllers
TBQC Cables
IC693CBL327
IC693CBL328
IC693CBL329
IC693CBL330
IC693CBL331
IC693CBL332
IC693CBL333
IC693CBL334
Cable, Left Side, One - 24 Pin 90 Degree Connector, 3 Meter. Cable has a connector on only one end and open
on the other. Cable used with TBQC I/O Face Plate Adapter or Fujitsu style I/O modules.
Cable, Right Side, One - 24 Pin 90 Degree Connector, 3 Meter. Cable has a connector on only one end and open
on the other. Cable used with TBQC I/O Face Plate Adapter or Fujitsu style I/O modules.
Cable, Left Side, One - 24 Pin 90 Degree Connector, 1 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Cable, Right Side, One - 24 Pin 90 Degree Connector, 1 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Cable, Left Side, One - 24 Pin 90 Degree Connector, 2 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Cable, Right Side, One - 24 Pin 90 Degree Connector, 2 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Cable, Left Side, One - 24 Pin 90 Degree Connector, 0.5 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Cable, Right Side, One - 24 Pin 90 Degree Connector, 0.5 Meter. from TBQC I/O Face Plate Adapter to TBQC
Interposing Terminal Block.
Active
Active
Active
Active
Active
Active
Active
Active
External Power Supplies
IC690PWR024
Field Power Supply 24 VDC 5 Amps
Active
IC690PWR124
Field Power Supply 24 VDC 10 Amps
Active
Rack to Rack Expansion Cables
IC693CBL300
Cable, I/O Base Expansion, 1 Meter, Shielded
Active
IC693CBL301
Cable, I/O Base Expansion, 2 Meters, Shielded
Active
IC693CBL302
Cable, I/O Base Expansion, 15 Meters, Shielded with built-in terminator
Active
IC693CBL312
Cable, I/O Base Expansion, 0.15 Meter, Shielded
Active
IC693CBL313
Cable, I/O Base Expansion, 8 Meters, Shielded
Active
IC693CBL314
Cable, I/O Base Expansion, 15 Meters, Shielded with no built-in terminator
Discontinued
IC693ACC307
I/O Bus Terminator Plug
Active
1.122
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Configuration Guidelines
When configuring a Series 90-30 the following guidelines should be considered
1. High density IC693 I/O modules require a terminal block assembly. IC694TBSxxx (spring clamp termination) or IC694TBBxxx (box style termination)
are required.
2. If the CPU is powered down frequently a high capacity battery should be considered. (IC693ACC302)
3. Add up the power consumption to ensure enough power supply capacity.
Examples of Typical Application
Configuration for Controller (Example application requiring (120) 24 VDC inputs and (80) Relay outputs AC power supply)
Power Supply Current Required (mA)
Qty
Part Number
670 mA @ 5 VDC
1
IC693CPU350
CPU with 32K of memory
1
IC693PWR321
120/240 VAC, 125 VDC Power Supply, 3 Amps @ 5 VDC; 0.625 @ 24 VDC relay and 0.833
@ 24 VDC isolated
420 mA @ 5 VDC
1
IC693CHS391
10 Slot CPU Base
1200 mA @ 5 V
4
IC693MDL660
Discrete Input Module, 24 VDC Positive Logic, 32 points (Requires terminal block)
35 mA @ 5 V; 110 mA @ 24 VDC Relay
5
IC693MDL940
Discrete Output Module, Relay 2.0 A per point Form A, 16 points (Terminal block
included).
Total current from power supply required:
Description
4
IC694TBB032
Terminal Block, Box Style
1
BC646MPS001
Logic Developer - PLC Standard - w/Programming Cable
2325 mA @ 5 V; 110 mA @ 24 VDC Relay.
Options to consider
1.4 Amps @ 5 VDC
1
IC693CPU374
CPU with built-in Ethernet 10/100Mbits and Web support
1
IC690PWR024
24 VDC, 5 Amp Output Power and 120/230 VAC Input Power Power Supply
1
IC693ACC302
Long term battery for CPU
1
IC754VSI06STD
QuickPanel View Intermediate 6 inch STN Touch Operator Interface
Configuration for Controller (100) 24 VDC inputs, (50) 24 VDC Outputs with ESCP protection, (20) Relay outputs, (12) 4 to 20 mA Analog Inputs, (12) 4 to 20 mA Analog Outputs
and 24 VDC power supply. Also requires Profibus Master and Ethernet communications.
Power Supply Current Required
1.4 Amps @ 5 VDC
Qty
Part Number
Description
1
IC693CPU374
CPU with built-in Ethernet 10/100 Mbits and Web support
2
IC693PWR331
24 VDC Power Supply, current available 6 Amps @ 5 VDC; 0.625 Amps @ 24 VDC relay;
0.833 @ 24 VDC isolated
420 mA @ 5 VDC
1
IC693CHS391
10 Slot CPU Base
1200 mA @ 5 VDC
4
IC693MDL660
Discrete Input Module, 24 VDC Positive Logic, 32 points (Requires terminal block)
600 mA @ 5 VDC
2
IC693MDL754
Discrete Output Module, 24 VDC Output with ESCP, 32 points (Requires terminal block)
35 mA @ 5 VDC; 110 mA @ 24 VDC Relay
2
IC693MDL940
Discrete Output Module, Relay 2.0 A per point Form A, 16 points (Terminal block included).
120 mA @ 5 VDC; 65 mA-User Supplied 24 VDC
1
IC693ALG223
Analog Input, 16 channels, current. (Terminal block included).
220 mA @ 5 VDC; 630 mA-User Supplied 24 VDC
2
IC693ALG392
Analog Output module, supports voltage and current, 8 channels (Terminal block
included).
450 mA @ 5 VDC
1
IC693PBM200
Profibus Master module, supports V0
150 mA @ 5VDC
1
IC693CHS392
10 slot I/O expansion rack
1
IC693CBL312
Rack Expansion Cable, 0.15 meters
1
IC693ACC307
I/O Bus Terminator Plug
6
IC694TBB032
Terminal Block, Box Style
1
BC646MPS001
Logic Developer - PLC Standard - w/Programming Cable
In the above configuration, all of the modules cannot go into one base. Therefore the I/O modules are divided into two bases.
Options to consider
www.ge-ip.com
1
IC200ACC003
EZ Store Device, CPU374 program download without the need of a PC.
1
IC690PWR024
24 VDC, 5 Amp Output Power and 120/230 VAC Input Power Power Supply
1
IC693ACC302
Long term battery for CPU
1
IC754VSI06STD
QuickPanel View Intermediate 6 inch STN Touch Operator Interface
GE Intelligent Platforms Control Systems Solutions 1.123
Series 90-30
Programmable Controllers
α and βi Series Servo Amplifiers
All Digital Servo Systems Offer High Performance and Reliability. FANUC HVis
and βi Series Servo Drives, based on over five million axes installed worldwide,
offer superior reliability and performance for unprecedented mean time
between failure. The HVis and βi Series Servos are available in a wide range
of ratings for use with the PACMotion motion controller.
High-Performance
Serial Encoders
Standard serial encoders built into the
motors provide exceptional feedback
­resolution of 64K or 128K counts per
revolution for is Series motors and
one million counts per revolution for
HVis Series motors. Serial encoders
support higher resolutions at high
motor velocities than standard
quadrature encoders and are more
immune to noise. An optional battery
connection provides absolute position
feedback, eliminating the need
to home the system after a power
shutdown.
Series
Motor Series
Controllers
Command
Interface
In-lb
Nm
Reduced Tuning and Setup
aHVi
aHVi, aHVis
PMM335
Fiber Optic
195-664
22-75
Separate PSM
There is no need for potentiometer
tuning or personality modules; little
tuning is required for properly sized
drives. All drive parameters are stored
in the controller in a standard motor
database. Configuration settings are
not stored in the drive, making it possible to replace drives with little set-up
time. Stored drive and machine
parameters are quickly transferred to
repeat production machines.
ßi
ßis
PMM335
Fiber Optic
3.5-177
0.4-20
Built-in
ßHVi
ßHVis
PMM335
Fiber Optic
17.7-177
20-Feb
Built-in
All-Digital System
All control loops—current, velocity,
and position—are closed in the
GE PACMotion controller. High-speed
microprocessors and/or digital signal
processors (DSPs) in the controller
provide loop update times of 250 µs.
The high response servo system can
compensate for machine design
limitations, yielding faster
acceleration/deceleration rates
and better responses to load changes.
1.124
All-Digital Servo
Command Signals
The PMM335 PACMotion Controller and
βi or αi Series amplifiers use a high
speed fiber optic command interface.
This digital interface improves efficiency by varying the on-time of the
transistor switches that control motor
­voltage and current. With its superior
noise immunity, both of these FANUC
digital command interfaces allows for
an increased signal to noise ratio for
improved accuracy and performance.
GE Intelligent Platforms Control Systems Solutions
Continuous
Torque Range
Power Supply
Agency Approvals
UL, IEC rating and CE mark compliant
INFO
For application, installation, and tuning
information, consult the Services website at
www.ge-ip.com.
www.ge-ip.com
Programmable Controllers
Series 90-30
VersaMotion
VersaMotion is a family of servo
motors and amplifiers that can be
easily connected to the Series 90-30
DSM314. The VersaMotion amplifier
supports high speed pulse and direction commands from the controllers.
The VersaMotion servo drive is simple
to use and maintain with the added
diagnostics and removable terminal
strips. Amplifier setup can be accomplished using the VersaMotion software
included with Proficy Machine Edition
or using the convenient front panel
­keypad.
Key Features:
• Versatile analog or pulse command
interface
• Position/Speed/Torque modes
• Dual control modes
• Internal single-axis position control
• Electronic gearing
• External JOG function
• Speed/Torque limit operation
• Built-in keypad/display for setup and
diagnostics
• Motor settling time below 1 ms
• Low speed stability and
performance: less than 0.5% error
at 1 RPM
Built-in Functions:
• Point-to-Point single axis position
control
• Simple stand-alone positioning
f­ unction with 8 internal stored
­position settings
• Configuration Parameter Editor
(clear, read, write functions) and
­initial configuration wizard
• Calculation tools to determine
­proper conversion from encoder
counts to desired user programming
units
• Move to Home function
• Position Teaching capability
• Incremental encoder feedback
(2500 ppr)
• Three channel digital oscilloscope to
display and record drive status
on-line
• User-definable Acceleration/
Deceleration with jerk limiting
(s-curve)
• Alarm history and status monitor
diagnostic screens
• 10msec acceleration time from running without load -/+ 3000 RPM
• Feed step control function
• High speed inertia corrections
(16 levels of system stiffness and
­responsiveness)
• Modbus Slave serial port (RS-485/
RS-422) for reading and writing
parameters from Machine Edition
www.ge-ip.com
Machine Edition VersaMotion
Set-up Features:
• Digital I/O set-up and monitoring
GE Intelligent Platforms Control Systems Solutions 1.125
Series 90-30
Programmable Controllers
Servo Amplifier Part Number Sequence
IC800VMA
04
2
Input Voltage
2– 220 VAC Single Phase
Rated Power
01– 100 Watts
02– 200 Watts
04– 400 Watts
07– 750 Watts
10– 1000 Watts
20– 2000 Watts
30–­3000 Watts
Example: IC800VMA042 is a 400 watt 220 VAC servo amplifier
Amplifiers Technical Data
Permissible Frequency Fluctuation
50 / 60 Hz ±5%
Resolution/Quadrature Feedback Counts
2500 ppr /10000 cpr
Control Modes
Position/Velocity/Torque
Dynamic Brake
Built-in
Position Control Mode:
Maximum Input Pulse Frequency
500KPPS (Line Driver) / Maximum 200KPPS (Open Collector)
Pulse Type
Pulse/Direction; CW/CCW; A/B Phase
Command Source
External pulse train/ Internal parameters
Torque Limit Operation
Yes
Feed Forward Compensation
Yes
Analog Commands: Voltage Range
0 to ±10 VDC
Torque and Velocity Control Mode: Command Source
External analog signal / Internal parameters
Speed Control Range
3.513888889
Speed Control Frequency Response
Maximum 450 Hz
Torque Control Mode Permissible Time for Overload
8 seconds under 200% rated output
Communications Interface
RS-232 / RS-485 /RS-422
Environmental Altitude
Altitude 1000 meters above sea level or lower
Environmental Operating Temperature
0 to 55°C (Forced cooling for operation above 55°C)
Environmental Storage Temperature
-20°C to 65°C
Environmental Humidity
0 to 90% (Non condensing)
Vibration
<20 Hz: 9.8 m/sec/sec (1G); 20 to 50 Hz: 5.88 m/sec/sec (0.6 G)
Standards
IEC/EN 61800-5-1, UL 508C, TUV, C-tick
1.126
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Amplifiers
The VersaMotion family of servo amplifiers offers a cost effective solution for a broad range
of motion applications. These versatile amplifiers support simple stand-alone positioning
capability using up to 8 stored motion profiles or can be connected to any motion controller
using an analog or pulse command interface. A built-in touchpad and display provides
convenient access to configuration parameters and system information. The serial interface
supports multi-drop system configurations and Modbus communication protocol.
IC800VMA012
IC800VMA022
IC800VMA042
IC800VMA072
Product Name
VersaMotion Amplifier
VersaMotion Amplifier
VersaMotion Amplifier
VersaMotion Amplifier
Lifecycle Status
Active
Active
Active
Active
Rated Output Power
100W
200W
400W
750W
Voltage/Frequency
Three-phase or Single-phase
220 VAC 50/60 Hz
Three-phase or Single-phase
220 VAC 50/60 Hz
Three-phase or Single-phase
220 VAC 50/60 Hz
Three-phase or Single-phase
220 VAC 50/60 Hz
Permissible Voltage
Fluctuation
Three-phase: 170 ~ 255 VAC
Single-phase: 200 ~ 255 VAC
Three-phase: 170 ~ 255 VAC
Single-phase: 200 ~ 255 VAC
Three-phase: 170 ~ 255 VAC
Single-phase: 200 ~ 255 VAC
Three-phase: 170 ~ 255 VAC
Single-phase: 200 ~ 255 VAC
Convection
Convection
Convection
Fan Cooling
Gear Ratio = N/M where N
1~32767, M: 1:32767
(1/50<N/M<200)
Gear Ratio = N/M where N:
1~32767, M: 1:32767
(1/50<N/M<200)
Gear Ratio = N/M where N:
1~32767, M: 1:32767
(1/50<N/M<200)
Gear Ratio = N/M where N:
1~32767, M: 1:32767
(1/50<N/M<200)
Cooling System
Electronic Gear Ratio
IC800VMA102
IC800VMA202
IC800VMA302
Product Name
VersaMotion Amplifier
VersaMotion Amplifier
VersaMotion Amplifier
Lifecycle Status
Active
Active
Active
Rated Output Power
1KW
2KW
3KW
Voltage/Frequency
Three-phase or Single-phase
220 VAC 50/60 Hz
Three-phase 220 VAC
50/60 Hz
Three-phase 220 VAC
50/60 Hz
Permissible Voltage
Fluctuation
Three-phase: 170 ~ 255 VAC
Single-phase: 200 ~ 255 VAC
Three-phase: 170 ~ 255 VAC
Three-phase: 170 ~ 255 VAC
Fan Cooling
Fan Cooling
Fan Cooling
Gear Ratio = N/M where N
1~32767, M: 1:32767
(1/50<N/M<200)
Gear Ratio = N/M where N:
1~32767, M: 1:32767
(1/50<N/M<200)
Electronic gear N/M multiple N:
1~32767, M: 1:32767
(1/50<N/M<200)
Cooling System
Electronic Gear Ratio
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.127
Series 90-30
Programmable Controllers
Servo Motor Part Number Sequence
IC800VMM
30
M
B
K
S
E25
Feedback
E25– 2500 ppr incremental encoder
Rated Power
01– 100 Watts
02– 200 Watts
04– 400 Watts
07– 750 Watts
10– 1000 Watts
20– 2000 Watts
30–­3000 Watts
Shaft Seal
S– With seal
Key
K– With shaft key
Brake
N– No brake
B– With brake (except 100 Watt Motor)
Inertia
L– Low Inertia
M– Medium Inertia (1Kw, 2Kw and 3Kw models only)
Example: IC800VMM30MBKSE25 is a 3000 watt medium Inertia motor with 2500 ppr encoder, brake, keyway and shaft seal.
Motors Technical Data
Insulation Class
Class B
Insulation Resistance
>100M ohm, 500 VDC
Insulation Strength
1500 VAC, 50Hz, 60 seconds
Vibration Grade (um)
15
Brake Power (VDC)
24
Operating Temperature (C)
0°~40°
Storage Temperature (C)
-10°~80°
Humidity
20~90%RH (non condensing)
Vibration
2.5G
IP Rating
IP65 (except shaft and connector)
1.128
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Motors
The VersaMotion family of servo motors offers high servo performance in a compact
­package. The motors range from 100 W to 3 kW with continuous torque ratings from
0.3 Nm to 14.3 Nm. All motors have metric mounting configurations and include a shaft
key and oil seal. For vertical axes or applications that need to hold position during power
loss motors with 24 VDC holding brakes are available. Motors are matched with the
VersaMotion amplifiers.
IC800VMM01L
IC800VMM02L
IC800VMM04L
IC800VMM07L
Product Name
VersaMotion
100 Watt
VersaMotion
200 Watt
VersaMotion
400 Watt
VersaMotion
750 Watt
Lifecycle Status
Active
Active
Active
Active
Rated Output (kW)
0.1
0.2
0.4
0.75
Rated Torque (Nm)
0.32
0.64
1.27
2.39
Maximum Torque (Nm)
0.96
1.92
3.82
7.16
Rated Speed (RPM)
3000
3000
3000
3000
Maximum Speed (RPM)
5000
5000
5000
5000
Rated Current (Amps)
0.9
1.55
2.6
5.1
Maximum Current (Amps)
2.7
4.65
7.8
15.3
Rotor Moment of Inertia
(Kg.m2 x 10-4)
0.037
0.177
0.277
1.13
Mechanical Time
Constant (msec)
0.75
0.8
0.53
0.63
Torque Constant KT (Nm)
0.36
0.41
0.49
0.47
Voltage Constant KE (mV/rmp)
13.6
16
17.4
17.2
Armature Resistance
(Ohm)
9.3
2.79
1.55
0.42
Armature Inductance
(mH)
24
10.84
6.84
3.53
Electrical Time Constant
(msec)
2.58
3.89
4.43
8.37
Maximum Radial
Shaft Load (Newton)
78.4
196
196
245
Maximum Thrust
Shaft Load (Newton)
39.2
68
68
98
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.129
Series 90-30
Programmable Controllers
Motors
The VersaMotion family of servo motors offers high servo performance in a compact
­package. The motors range from 100 W to 3 kW with continuous torque ratings from
0.3 Nm to 14.3 Nm. All motors have metric mounting configurations and include a shaft
key and oil seal. For vertical axes or applications that need to hold position during power
loss motors with 24 VDC holding brakes are available. Motors are matched with the
VersaMotion amplifiers.
IC800VMM10L
IC800VMM10M
IC800VMM20L
IC800VMM20M
IC800VMM30M
Product Name
VersaMotion
1000 Watt
VersaMotion
1000 Watt
VersaMotion
2000 Watt
VersaMotion
2000 Watt
VersaMotion
3000 Watt
Lifecycle Status
Active
Active
Active
Active
Active
Rated Output (kW)
1
1
2
2
3
Rated Torque (Nm)
3.18
4.77
6.37
9.55
14.32
Maximum Torque (Nm)
9.54
14.32
19.11
28.66
42.96
Rated Speed (RPM)
3000
2000
3000
2000
2000
Maximum Speed (RPM)
5000
3000
5000
3000
3000
Rated Current (Amps)
7.3
5.6
11.3
11
16.1
Maximum Current (Amps)
21.9
24.9
33.9
33
48.3
Rotor Moment of Inertia
(Kg.m2 x 10-4)
2.65
9.14
4.45
15.88
55
Mechanical Time Constant
(msec)
0.74
1.64
0.66
1.05
1.06
Torque Constant KT (Nm/A)
0.44
0.85
0.53
0.87
0.89
Voltage Constant KE (mV/rpm)
16.8
31.9
19.2
31.8
32
Armature Resistance
(Ohm)
0.2
0.465
0.14
0.174
0.052
Armature Inductance
(mH)
2
5.99
1.53
2.76
1.38
10.26
12.88
10.63
15.86
26.39
Maximum Radial
Shaft Load (Newton)
490
490
490
490
1470
Maximum Thrust
Shaft Load (Newton)
98
98
98
98
490
IC800VMA102
IC800VMA102
IC800VMA202
IC800VMA202
IC800VMA302
Electrical Time Constant
(msec)
Amplifier Model
1.130
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
VersaMotion Accessories
Accessories
IC800VMACONCN1
CN1 I/O Connector
Active
IC800VMACONCN2
CN2 Encoder Connector
Active
IC800VMACONCN3
CN3 Communication Connector
Active
IC800VMACONACP
AC Power Connector (100W to 1kW models only)
Active
IC800VMACONMTRP
Motor Power Connector (100W to 1kW models only)
Active
IC800VMADBR001
External Braking Resistor Connector (100W to 1kW models only)
Active
IC800VMMCONP001
Motor Power Connector for 100 Watt to 750 Watt motors without brake
Active
IC800VMMCONP002
Motor Power Connector for 100 Watt to 750 Watt motors with brake
Active
IC800VMMCONP003
Motor Power Connector for 1000 Watt or 2000 Watt motors with or without brake
Active
IC800VMMCONP004
Motor Power Connector for 3000 Watt motors with or without brake
Active
IC800VMMCONE001
Encoder Connector for 100 Watt to 750 Watt motors
Active
IC800VMMCONE002
Encoder Connector for 1000 Watt and larger motors
Active
Motor Connectors
Motor Power Cables
IC800VMCP030
Power Cable for 100 Watt to 750 Watt servo motor without brake, 3 m (9.8 feet)
Active
IC800VMCP050
Power Cable for 100 Watt to 750 Watt servo motor without brake, 5 m (16.4 feet)
Active
IC800VMCP100
Power Cable for 100 Watt to 750 Watt servo motor without brake, 10 m (32.8 feet)
Active
IC800VMCP200
Power Cable for 100 Watt to 750 Watt servo motor without brake, 20 m (65.7 feet)
Active
IC800VMCP1030
Power Cable for 1000 Watt servo motor without brake, 3 m (9.8 feet)
Active
IC800VMCP1050
Power Cable for 1000 Watt servo motor without brake, 5 m (16.4 feet)
Active
IC800VMCP1100
Power Cable for 1000 Watt servo motor without brake, 10 m (32.8 feet)
Active
IC800VMCP1200
Power Cable for 1000 Watt servo motor without brake, 20 m (65.7 feet)
Active
IC800VMCP2030
Power Cable for 2000 Watt servo motor without brake, 3 m (9.8 feet)
Active
IC800VMCP2050
Power Cable for 2000 Watt servo motor without brake, 5 m (16.4 feet)
Active
IC800VMCP2100
Power Cable for 2000 Watt servo motor without brake, 10 m (32.8 feet)
Active
IC800VMCP2200
Power Cable for 2000 Watt servo motor without brake, 20 m (65.7 feet)
Active
IC800VMCP3030
Power Cable for 3000 Watt servo motor without brake, 3 m (9.8 feet)
Active
IC800VMCP3050
Power Cable for 3000 Watt servo motor without brake, 5 m (16.4 feet)
Active
IC800VMCP3100
Power Cable for 3000 Watt servo motor without brake, 10 m (32.8 feet)
Active
IC800VMCP3200
Power Cable for 3000 Watt servo motor without brake, 20 m (65.7 feet)
Active
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions 1.131
Series 90-30
Programmable Controllers
Brake and Motor Power Cables
IC800VMCB030
Brake and Motor Power Cable for 200 Watt to 750 Watt servo motor with brake, 3 m (9.8 feet)
Active
IC800VMCB050
Brake and Motor Power Cable for 200 Watt to 750 Watt servo motor with brake, 5 m (16.4 feet)
Active
IC800VMCB100
Brake and Motor Power Cable for 200 Watt to 750 Watt servo motor with brake, 10 m (32.8 feet)
Active
IC800VMCB200
Brake and Motor Power Cable for 200 Watt to 750 Watt servo motor with brake, 20 m (65.7 feet)
Active
IC800VMCB1030
Brake and Motor Power Cable for 1000 Watt servo motor with brake, 3 m (9.8 feet)
Active
IC800VMCB1050
Brake and Motor Power Cable for 1000 Watt servo motor with brake, 5 m (16.4 feet)
Active
IC800VMCB1100
Brake and Motor Power Cable for 1000 Watt servo motor with brake, 10 m (32.8 feet)
Active
IC800VMCB1200
Brake and Motor Power Cable for 1000 Watt servo motor with brake, 20 m (65.7 feet)
Active
IC800VMCB2030
Brake and Motor Power Cable for 2000 Watt servo motor with brake, 3 m (9.8 feet)
Active
IC800VMCB2050
Brake and Motor Power Cable for 2000 Watt servo motor with brake, 5 m (16.4 feet)
Active
IC800VMCB2100
Brake and Motor Power Cable for 2000 Watt servo motor with brake, 10 m (32.8 feet)
Active
IC800VMCB2200
Brake and Motor Power Cable for 2000 Watt servo motor with brake, 20 m (65.7 feet)
Active
IC800VMCB3030
Brake and Motor Power Cable for 3000 Watt servo motor with brake, 3 m (9.8 feet)
Active
IC800VMCB3050
Brake and Motor Power Cable for 3000 Watt servo motor with brake, 5 m (16.4 feet)
Active
IC800VMCB3100
Brake and Motor Power Cable for 3000 Watt servo motor with brake, 10 m (32.8 feet)
Active
IC800VMCB3200
Brake and Motor Power Cable for 3000 Watt servo motor with brake, 20 m (65.7 feet)
Active
IC800VMCE030
Encoder Cable for 100 to 750 Watt, 3 m (9.8 feet)
Active
IC800VMCE050
Encoder Cable for 100 to 750 Watt, 5 m (16.4 feet)
Active
IC800VMCE100
Encoder Cable for 100 to 750 Watt, 10 m (32.8 feet)
Active
IC800VMCE200
Encoder Cable for 100 to 750 Watt, 20 m (65.7 feet)
Active
IC800VMCE1030
Encoder Cable for 1000 Watt and greater, 3 m (9.8 feet)
Active
IC800VMCE1050
Encoder Cable for 1000 watt and greater, 5 m (16.4 feet)
Active
IC800VMCE1100
Encoder Cable for 1000 watt and greater, 10 m (32.8 feet)
Active
IC800VMCE1200
Encoder Cable for 1000 watt and greater, 20 m (65.7 feet)
Active
I/O Terminal Block Breakout Board and 0.5 m (1.6 feet) Cable
Active
Encoder Cables
I/O Terminal Block
IC800VMTBC005
External Braking Resistors
IC800VMBR040
40 Ohm, 400 Watt External Braking (Regeneration) Resistor
Active
IC800VMBR020
20 Ohm, 1000 Watt External Braking (Regeneration) Resistor
Active
Communications and I/O Interface Cables
IC800VMCS030
Communications Cable from servo amplifier to PC, 3 m (9.8 feet)
Active
IC800VMCI010
Flying lead I/O interface cable, 1 meter
Active
IC800VMCI030
Flying lead I/O interface cable, 3 meter
Active
Software Configuration Tool
IC646MPM101
Proficy Logic Developer - PLC Nano/Micro and VersaMotion, Programming Cable (No Upgrades included)
Active
BC646MPM101
Proficy Logic Developer - PLC Nano/Micro and VersaMotion, Programming Cable (Includes 15 months of upgrades)
Discontinued
1.132
GE Intelligent Platforms Control Systems Solutions
www.ge-ip.com
Programmable Controllers
Series 90-30
Examples of Typical Application using a Series 90-30
Application: 1000 Watt Low Inertia Motor with Brake. Configuration for Controller (100) 24 VDC inputs, (50) 24 VDC Outputs with ESCP protection, (20) Relay outputs, (12) 4 to 20 mA
Analog Inputs, (12) 4 to 20 mA Analog Outputs and 24 VDC power supply. Also requires Profibus Master and Ethernet communications.
Qty
Part Number
Description
Controller, I/O and Display
1
IC693CPU374
CPU with built-in Ethernet 10/100Mbits and Web support
2
IC693PWR331
24 VDC Power Supply, current available 6 Amps @ 5 VDC; 0.625 Amps @ 24 VDC relay; 0.833 @ 24 VDC isolated
1
IC693CHS391
10 Slot CPU Base
1
IC693DSM314
Servo Motion Module, 2 digital and 1 analog axis supported
1
IC693ACC336
DSM Analog Servo Interface Terminal Board
1
IC693CBL324
DSM Analog TB Interface Cable, 1 m (3.28 feet)
1
IC800VMCI010
VersaMotion Flying Lead I/O Interface Cable, 1 m (3.28 feet)
4
IC693MDL660
Discrete Input Module, 24 VDC Positive Logic, 32 points (Requires terminal block)
2
IC693MDL754
Discrete Output Module, 24 VDC Output with ESCP, 32 points (Requires terminal block)
2
IC693MDL940
Discrete Output Module, Relay 2.0 A per point Form A, 16 points (Terminal block included)
1
IC693ALG223
Analog Input Module, 16 channels, current. (Terminal block included)
2
IC693ALG392
Analog Output Module, supports voltage and current, 8 channels (Terminal block included)
1
IC693PBM200
Profibus Master Module, supports V0
1
IC693CHS392
10 slot I/O Expansion Rack
1
IC693CBL312
Rack Expansion Cable, 0.15 meter
1
IC693ACC307
I/O Bus Terminator Plug
6
IC694TBB032
Terminal Block, Box Style
1
BC646MPS001
Logic Developer - PLC Standard - w/Programming Cable
Servo and Motor
1
IC800VMM10LBKSE25
VersaMotion 1000 Watt Low Inertia Servo Motor with Brake. Motor has keyway and oil seal
1
IC800VMA102
Servo Amplifier, 1000 Watts, 220 VAC
1
IC800VMCB1030
Brake and Power Cable for 1000 Watt Servo Motor with Brake, 3 m (9.8 feet)
1
IC800VMCE1030
Encoder Cable for 1000 Watt and greater, 3 m (9.8 feet)
1
IC800VMTBC005
I/O Terminal Block and Cable (0.5 meter)
1
IC800VMCS030
Communications Cable from Servo Driver to PC, 3 m (9.8 feet)
Programming Software for Control, Display and Motion
1
BC646MPS001
www.ge-ip.com
Machine Edition Standard Development Suite with Proficy GlobalCare Complete. Includes VersaMotion configuration tool, View
Development for QuickPanel and PLC Standard with programming cable. Proficy GlobalCare with 15 months of free upgrades which
is renewable on an annual basis.
GE Intelligent Platforms Control Systems Solutions 1.133
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement