DGT60: MAXI "GOLIAH" WEIGHT INDICATORREPEATER Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Particularly suitable for use outdoors, also in full sunlight, and where it's necessary to view from a distance at any angle. Case completely in IP68 stainless steel. CEM approvable (OIML R76 / EN 45501). MAIN FEATURES ● Functional 5key waterproof keypad. ● Large 6digit display, 60 mm high, with very efficient SMD LEDs (software adjustment of the brightness intensity), complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and DGT60 indicator / repeater. with power up to 750 mcd. ● IP68 stainless steel case complete of wall fixing bracket. ● Dimensions: 410 x 67 x 165 mm. ● Calibration, SetUp parameters, configurable from keyboard or from PC with DINI TOOLS. ● Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE M approved version for legal for trade use. ● Max. 800.000d viewable with internal resolution up to 3.000.000 points. ● Up to 8 signal linearisation points with DINITOOLS. ● A/D 24 bit sigmadelta 4channel conversion, max.200 conv./sec. with automatic selection. Dimensions in mm. ● Connectable with up to 16 analogue load cells with 350 Ohm input resistance. DGT60BC / DGT60AN / DGT60PB FUNCTIONS ● ● digital equalisation or management of up to 4 THROUGH KEYBOARD: independent weighing systems. Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Standby. ● ● Power supply from 12 to 24 Vdc with 110240 Vac internal power supplier. SELECTABLE: High Resolution Weighing x 10; Net/Gross or lb/kg Management of a weighing system with up to 4 cells with ● Available as Scale or as Repeater version. conversion; Weighs totalisation; Formulation; Approved transmission of the weight to PC/PLC (with ALMEM Alibi I/O SECTION memory option); Counting; In/Out Truck weighing; Hold e Peak. ● ● RS485 bidirectional port configurable for connection to PC, PLC, or other external units. MOSFET OUTPUT: Set Point Control on the weight, either positive (in ● PROFIBUS serial interface (DGT60PB model). loading) or negative (in unloading), or on the pieces ● 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions. (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability. ● RS232/C bidirectional port configurable for connection to printer, PC, or other external units. EXTERNAL INPUT: Simulation of key pressure; Keyboard lock. ● ● ● mA max, with configurable functions. SERIAL PORTS: On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; 2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min 20 ● 16bit analogue output (DGT60AN model) 420mA / 0 5Vdc / 010Vdc at choice; maximum applicable voltage: Scale switch; Setting of outputs activation thresholds; 350 Ohm; minimum applicable voltage resistance: 10 Reading/Writing of Alibi Memory. kohm. DGT60BC and DGT60AN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol. ● DGT60R REPEATER FUNCTIONS ● Version with specific program for use of the indicator as a THROUGH 16 bit ANALOGUE OUTPUT (DGT60AN): universal weight repeater or as a multiscale repeater Analogue output proportional to the net or gross weight, (MASTER) in combination with DFW/DGT/MCW. either positive (in loading) or negative (in unloading). ● FUNCTIONING MODES: Multiscale repeater (MASTER): function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales. UNIVERSAL weight repeater: function which allows to repeat the weight of any scales, through the configuration of the input string. OPTIONS ONLY AVAILABLE AT TIME OF ORDER ● Option Box with thermal printer. ● Ethernet interface. ● External 868Mhz radio modem. ● 433MHz radiofrequency remote control. ● Real time clock. ● Alibi Memory. Available versions Code Description DGT60BC Weight indicator with IP68 stainless steel case, 5key keypad, and 60 mm LED display. DGT60AN Weight indicator with IP68 stainless steel case, 5key keypad, 60 mm LED display, and 16 bit analogue output. DGT60PB Weight indicator with IP68 stainless steel case, 5key keypad, 60 mm LED display, and PROFIBUS interface. DGT60R Weight repeater with IP68 stainless steel case, 5key keypad, 60 mm LED display, and configurable protocol. Options only available at time of order Code Description KCEM Kit of plates and Welmec form for the approval of the system for legal for trade use, for each provided platform/weighing system, connected to Dini Argeo indicator. VENT Air valve for regulating the humidity and the pressure inside the indicator, advised for IP68 applications. OBTPRI60 Thermal printer for mounting attached to weight indicator, with stainless steel case, connection cable, internal power adapter for mounting inside the indicator. Combinable with DGT60 series indicator. OBRF External 868 MHz radio frequency module, ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. OBRFUSB OBRF232 DFCLK ALMEM TLR ETH ETHCBRJ LCCBC LCCB5C LCCB10C RSCBPC RSCB5 RSCB10 KMB4 DCATEXMB4 TECSUP Accessories Code STFR UKPLUG TECMAN UMAN 868 MHz radio frequency module for PC, with PVC box and 1 m USB/mini USB connecting cable; power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRFUSB must be combined with another radio module). 868 MHz radio frequency module for PC, ABS IP65 protecting box, 3 m RS232 connecting cable, complete with DB9 pin connector and external power supply. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRF232 must be combined with another radio module). Real time clock for printing/displaying of the date and time. Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC. Real time clock integrated for print of the date/time. 433MHz radio frequency remote control, with 6 keys, for use up to 50 m of distance, in appropriate environmental conditions. Integrated Ethernet interface with speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols. Ethernet cable 1,5 m long, for connection between indicator and PC network. Made up of fairlead. Shielded cable for platform, l= 50 cm + female connector to be soldered. Shielded cable for platform, l= 50 cm + 5 m extension cable. Shielded cable for platform, l= 50 cm cable + 10 m extension cable. RS232/C cable l= 1,5 m, for the connection of the weight indicator to PC, made up of 9pole female connector on PC side and wires for terminal connection on indicator side. RS232 connection cable l= 5 m, for the connection of the weight indicator to a weight repeater, without connectors. RS232/C cable l= 10 m, for the connection of the weight indicator to a weight repeater, without connectors. Kit of 3 passive safety zener barriers for up to 4 load cells of 350 ohm, housed in an ABS box, for intrinsic protection weighing systems in a hazardous area. Marking of the single barrier: ATEX II (1) GD [Ex ia] IIC [Ex iaD]. Marking of the whole box with three Zener barriers: ATEX II 3G Ex nA II T4 IP65 (20°C ≤ Ta ≤ +40°C). Declaration of ATEX conformity of the whole, Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for NON ATEX weight indicator connected to Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English. Technical assistance by telephone or at our premises for instrument configuration and printout formatting. NET HOURLY PRICE. Description Stainless steel fixing bracket for mounting the weight indicator on wall, with adjustable inclination. Power adapter from Schuko to BS1363. Printed technical manual (free, if downloaded from the web). NET PRICE. Printed user manual (free, if downloaded from the web and available in the CD, fitted with the product). NET PRICE.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project