ST 3000 Smart Transmitter Specification and Model Selection Guide

ST 3000 Smart Transmitter Specification and Model Selection Guide
34-ST-03-65
10/99
ST 3000 Smart Transmitter
Series 900 Differential Pressure Models
STD924
STD930
STD974
0 to 400 inH2O
0 to 100 psi
0 to 3000 psi
Specification and
Model Selection
Guide
0 to 1,000 mbar
0 to 7,000 mbar
0 to 210,000 mbar
Function
Honeywell’s ST 3000® Series 900
Differential Pressure Transmitters
bring proven “smart” technology to
a wide spectrum of pressure measurement applications including
flow and liquid level. They transmit
an output signal proportional to the
measured variable in either an
analog 4 to 20 milliampere format
or in a digital DE protocol format for
direct digital integration with our
TDC 3000®X control system.
Additional protocol options
available for the ST 3000 Series
900 transmitters include
1
FOUNDATION™ Fieldbus and
2
HART® . See the Model Selection
Guide for help in selecting the
correct ordering code for the
desired protocol.
In the standard transmitter you
easily select the analog or digital
transmission format through the
Smart Field Communicator (SFC®)
which is the common hand-held
operator interface for our DE-based
Smartline® Transmitters. All configuration, operation, and communications functions are under the
control of the ST 3000 Smart
Transmitter’s microprocessor and
are accessible through the SFC.
¹ FOUNDATION™ Fieldbus is a trademark
of the Fieldbus Foundation.
² HART is a registered trademark of the
Hart Communication Foundation
ST 3000
Differential Pressure Transmitter
H on
eyw
ell
...
o.
I NG
G N RK
TA C WO
SF
Models:
STD924
STD930
STD974
ITS
UN
CO
NF
ID
V
LR
0%
DA
MP
V
UR
0%
10
NU
ME M
ITE
XT
NE
T
SE
TOU T
PU
R-R
CO T
EC
EV
PR
9
8
6
7
5
4
Smart Field
Communicator
3
2
1
A
ST
T
0
SP
.
R
C L O)
(N
AN
SH
Can be ordered
separately see
specification
34-ST-03-55
+/
IF
R
TE
EN ES)
(Y
T
M/
NU HA
P
AL
24256
Figure 1 —Series 900 Differential Pressure Transmitters feature proven
“smart” technology and come in several models to meet varying application
needs.
Industrial Automation and Control, 16404 N. Black Canyon Highway, Phoenix, AZ 85023
Printed in U.S.A.■ © Copyright 1998 — Honeywell Inc.
34-ST-03-65
Page 2
Features
• Choice of linear or square root
output conformity is a simple
configuration selection.
• Direct digital integration with
TDC 3000X system provides
local measurement accuracy to
the system level without adding
typical A/D and D/A converter
inaccuracies.
• Unique piezoresistive sensor
automatically compensates
input for temperature and static
pressure.
• Added “smart” features include
configuring lower and upper
range values, simulating
accurate analog output, and
selecting preprogrammed
engineering units for display.
• Smart transmitter capabilities
with local or remote interfacing
means significant manpower
efficiency improvements in
commissioning, start-up, and
ongoing maintenance functions.
• Local zero and span
adjustments are available for
alternate adjustment method, if
desired.
Description
The ST 3000 transmitter can
replace any 4 to 20 milliampere
output transmitter in use today,
and operates over a standard
two-wire system.
The measuring means is a
piezoresistive sensor which
actually contains three sensors in
one. It contains a differential
pressure sensor, a temperature
sensor, and a static pressure
sensor. Microprocessor-based
electronics provide higher spanturndown ratio, improved
temperature and pressure
compensation, and improved
accuracy.
Like other Smartline Transmitters,
the ST 3000 features two-way
communication between the operator and the transmitter through our
SFC. You can connect the SFC
anywhere that you can access the
transmitter signal lines, and it provides the capabilities of transmitter
adjustments and diagnostics from
remote locations, such as the control
room.
The transmitter’s meter body and
electronics housing resist shock,
vibration, corrosion, and moisture.
The electronics housing contains a
compartment for the single-board
electronics, which is isolated from an
integral junction box. The singleboard electronics is replaceable and
interchangeable with any other
ST 3000 Series 900 or Series 100e
model transmitter.
34-ST-03-65
Page 3
Specifications
Operating Conditions – All Models
Parameter
Reference
Condition
(at zero static)
Rated Condition
Operative Limits
Transportation and
Storage
°C
°F
°C
°F
°C
Ambient Temperature
25 ±1
77 ±2
-40 to 85
-40 to 185
-40 to 85
-40 to 185 -55 to 125 -67 to 257
Meter Body Temperature
25 ±1
77 ±2
-40 to 110*
-40 to 230*
-40 to 125
-40 to 257 -55 to 125 -67 to 257
Humidity
%RH
Overpressure
10 to 55
0 to 100
0 to 100
0
0
3000**
210**
3000**
210**
Atmospheric
Atmospheric
25
13
2 (short term†)
1 (short term†
psi
bar
Vacuum Region - Minimum
Pressure
mmHg absolute
inH2O absolute
Supply Voltage, Current,
and Load Resistance
°F
°C
°F
0 to 100
Voltage Range: 10.8 to 42.4 Vdc at terminals
Current Range: 3.0 to 21.8 mA
Load Resistance: 0 to 1440 ohms (as shown in Figure 2)
* For CTFE fill fluid, the rating is –15 to 70°C (5 to 158°F)
** For models STD924 and STD930, static limit is 2000 psi (140 bar) for temperatures below –15°C (5°F). Overpressure is 3K.
† Short term equals 2 hours at 70°C (158°F)
1440
1200
Loop
Resistance
(ohms)
= Operating
Area
NOTE: A minimum of 250
0hms of loop resistance is
necessary to support
communications. Loop
resistance equals barrier
resistance plus wire
resistance plus receiver
resistance. Also 45 volt
operation is permitted if
not an intrinsically safe
installation.
800
650
450
250
0
10.8 16.28 20.63 25 28.3
37.0
Operating Voltage (Vdc)
Figure 2—Supply voltage and loop resistance chart
42.4
21012
34-ST-03-65
Page 4
Performance Under Rated Conditions* - Model STD924 (0 to 400 inH2O/1000 mbar)
Parameter
Description
Upper Range Limit
inH2O
mbar
400 (39.2°F/4°C is standard reference temperature for inH2O range.)
1000
Minimum Span
inH2O
mbar
10
25
Note: Recommended minimum span in square root mode is 20 inH2O (50 mbar).
Turndown Ratio
40 to 1
Zero Elevation and Suppression
–5 to +100% URL.
Accuracy (Reference – Includes
combined effects of linearity,
hysteresis, and repeatability)
In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (25 inH 2O), accuracy equals:
• Accuracy includes residual error
after averaging successive
readings.
25 inH2O
62 mbar
±0.05 + 0.05  span inH O or ±0.05 + 0.05  span mbar in % span


2 

In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever
is greater, terminal based.
For URV below reference point (25 inH2O), accuracy equals:
• For FOUNDATION Fieldbus use
Digital Mode specifications. For
HART use Analog Mode
specifications.
Zero Temperature Effect per
28°C (50°F)
25 inH2O
62 mbar
±0.025 + 0.05  span inH O or ±0.025 + 0.05  span mbar in % span


2 

In Analog Mode: ±0.1625% of span.
For URV below reference point (50 inH 2O), effect equals:
50 inH2O
125 mbar
±0.0125 + 0.15  span inH O or ±0.0125 + 0.15  span mbar in % span


2 

In Digital Mode: ±0.15% of span.
For URV below reference point (50 inH 2O), effect equals:
50 inH2O
125 mbar
±0.15  span inH O or ±0.15  span mbar in % span


2 

Combined Zero and Span
Temperature Effect per 28°C
(50°F)
In Analog Mode: ±0.25% of span.
For URV below reference point (50 inH2O), effect equals:
50 inH2O
125 mbar
±0.10 + 0.15  span inH O or ±0.10 + 0.15  span mbar in % span


2 

In Digital Mode: ±0.225% of span.
For URV below reference point (50 inH2O), effect equals:
50 inH2O
125 mbar
±0.075 + 0.15  span inH O or ±0.075 + 0.15  span mbar in % span


2 

Zero Static Pressure Effect per
1000 psi (70 bar)
±0.1625% of span.
For URV below reference point (50 inH2O), effect equals:
50 inH2O
125 mbar
±0.0125 + 0.15  span inH O or ±0.0125 + 0.15  span mbar in % span


2 

Combined Zero and Span Static
Pressure Effect per 1000 psi (70
bar)
±0.30% of span.
For URV below reference point (50 inH2O), effect equals:
Stability
±0.03% of URL per year
50 inH2O
125 mbar
±0.15 + 0.15  span inH O or ±0.15 + 0.15  span mbar in % span


2 

* Performance specifications are based on reference conditions of 25°C (77°F), zero (0) static pressure, 10 to 55% RH, and
316L Stainless Steel barrier diaphragm.
34-ST-03-65
Page 5
Performance Under Rated Conditions* - Model STD930 (0 to 100 psi/7000 mbar)
Parameter
Description
Upper Range Limit
psi
bar
100
7
Minimum Span
psi
bar
5
0.35
Turndown Ratio
20 to 1
Zero Elevation and Suppression
–5 to +100% URL.
Accuracy (Reference – Includes
combined effects of linearity,
hysteresis, and repeatability)
In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever
is greater, terminal based.
For URV below reference point (20 psi), accuracy equals:
•
20 psi
1.4 bar
±0.05 + 0.05  span psi or ±0.05 + 0.05  span bar in % span
•




In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever
is greater, terminal based.
For URV below reference point (20 psi), accuracy equals:
20 psi
1.4 bar
±0.025 + 0.05  span psi or ±0.025 + 0.05  span bar in % span

Zero Temperature Effect per
28°C (50°F)



In Analog Mode: ±0.1625% of span.
For URV below reference point (30 psi), effect equals:
30 psi
2 bar
±0.0125 + 0.15  span psi or ±0.0125 + 0.15  span bar in % span




In Digital Mode: ±0.15% of span.
For URV below reference point (30 psi), effect equals:
30 psi
2 bar
±0.15  span psi or ±0.15  span bar in % span

Combined Zero and Span
Temperature Effect per 28°C
(50°F)



In Analog Mode: ±0.25% of span.
For URV below reference point (30 psi), effect equals:
30 psi
2 bar
±0.10 + 0.15  span psi or ±0.10 + 0.15  span bar in % span




In Digital Mode: ±0.225% of span.
For URV below reference point (30 psi), effect equals:
30 psi
2 bar
±0.075 + 0.15  span psi or ±0.075 + 0.15  span bar in % span

Zero Static Pressure Effect per
1000 psi (70 bar)



±0.1625% of span.
For URV below reference point (30 psi), effect equals:
30 psi
2 bar
±0.0125 + 0.15  span psi or ±0.0125 + 0.15  span bar in % span

Combined Zero and Span Static
Pressure Effect per 1000 psi (70
bar)


±0.30% of span.
For URV below reference point (30 psi), effect equals:
30 psi
2 bar
±0.15 + 0.15  span psi or ±0.15 + 0.15  span bar in % span

Stability




±0.04% of URL per year
* Performance specifications are based on reference conditions of 25°C (77°F), zero (0) static pressure, 10 to 55% RH, and
316L Stainless Steel barrier diaphragm.
34-ST-03-65
Page 6
Performance Under Rated Conditions* - Model STD974 (0 to 3000 psi/210 bar)
Parameter
Description
Upper Range Limit
psi
bar
3000
210
Minimum Span
psi
bar
100
7
Turndown Ratio
30 to 1
Zero Elevation and Suppression
–0.6 and +100% URL.
Accuracy (Reference – Includes
combined effects of linearity,
hysteresis, and repeatability)
In Analog Mode: ±0.2% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (300 psi), accuracy equals:
• Accuracy includes residual error
after averaging successive
readings.
300 psi
21 bar
±0.05 + 0.15  span psi or ±0.05+ 0.15  span bar in % span
• For FOUNDATION Fieldbus use
Digital Mode specifications. For
HART use Analog Mode
specifications.
Zero Temperature Effect per
28°C (50°F)




In Digital Mode: ±0.175% of calibrated span or upper range value (URV), whichever
is greater, terminal based.
For URV below reference point (300 psi), accuracy equals:
300 psi
21 bar
±0.025 + 0.15  span psi or ±0.025+ 0.15 span bar in % span




In Analog Mode: ±0.2125% of span.
For URV below reference point (500 psi), effect equals:
500 psi
35 bar
±0.0125 + 0.20  span psi or ±0.0125 + 0.20  span bar in % span




In Digital Mode: ±0.20% of span.
For URV below reference point (500 psi), effect equals:
500 psi
35 bar
±0.20  span psi or ±0.20  span bar in % span

Combined Zero and Span
Temperature Effect per 28°C
(50°F)



In Analog Mode: ±0.325% of span.
For URV below reference point (500 psi), effect equals:
500 psi
35 bar
±0.125 + 0.20  span psi or ±0.125 + 0.20  span bar in % span




In Digital Mode: ±0.30% of span.
For URV below reference point (500 psi), effect equals:
500 psi
35 bar
±0.10 + 0.20  span psi or ±0.10 + 0.20  span bar in % span

Zero Static Pressure Effect per
1000 psi (70 bar)



±0.1625% of span.
For URV below reference point (500 psi), effect equals:
500 psi
35 bar
±0.0125 + 0.15  span psi or ±0.0125 + 0.15  span bar in % span

Combined Zero and Span Static
Pressure Effect per 1000 psi (70
bar)


±0.30% of span.
For URV below reference point (500 psi), effect equals:
500 psi
35 bar
±0.15 + 0.15  span psi or ±0.15 + 0.15  span bar in % span

Stability




±0.03% of URL per year
* Performance specifications are based on reference conditions of 25°C (77°F), zero (0) static pressure, 10 to 55% RH, and
316L Stainless Steel barrier diaphragm.
34-ST-03-65
Page 7
Performance Under Rated Conditions - General for all Models
Parameter
Description
Output (two-wire)
Analog 4 to 20 mA or DE digital communications mode. Options available for
FOUNDATION Fieldbus and HART protocol.
Supply Voltage Effect
0.005% span per volt.
Damping Time Constant
Adjustable from 0 to 32 seconds digital damping.
CE Conformity (Europe)
89/336/EEC, Electromagnetic Compatibility (EMC) Directive.
Lightning Protection Option
Leakage Current: 10 microamps max. @ 42.4 VDC, 93°C
(Code “LP”)
Impulse Rating:
(rise/decay)
10/20 µ sec.
5,000 Amps (50 strikes) 10,000 Amps (20 strikes)
10/1000 µ sec. 250 Amps (1000 strikes) 500 Amps (400 strikes)
Physical and Approval Bodies
Parameter
Description
Barrier Diaphragms Material
STD924, STD930
STD974
316L SS, Hastelloy C-276, Monel, Tantalum
316L SS, Hastelloy C-276
Process Head Material
STD924, STD930
STD974
316 SS, Carbon Steel (zinc-plated), Monel, Hastelloy
316 SS, Carbon Steel (zinc-plated), Hastelloy
Head Gaskets
Teflon, Viton (Only with 316L SS or Monel barrier diaphragms)
Meter Body Bolting
Carbon Steel (Zinc plated, standard) or A286 SS (NACE) bolts and 302/304 SS
(NACE) nuts for heads and 316 SS (NACE) bolts for adapters (standard option).
Mounting Bracket
Carbon Steel (Zinc-plated) or Stainless Steel angle bracket or Carbon Steel flat
bracket available (standard options).
Fill Fluid
Silicone DC 200 oil or CTFE (Chlorotrifluoroethylene)
Electronic Housing
Epoxy-Polyester hybrid paint. Low Copper-Aluminum. Meets NEMA 4X (watertight)
and NEMA 7 (explosionproof). Stainless steel optional.
Process Connections
1/4-inch NPT; 1/2-inch NPT with adapter, standard option; DIN.
Wiring
Accepts up to 16 AWG (1.5 mm diameter).
Mounting
Can be mounted in virtually any position using the standard mounting bracket. Bracket
is designed to mount on 2-inch (50 mm) vertical or horizontal pipe. See Figure 3.
Dimensions
See Figures 4 and 5.
Net Weight
9 pounds (4.1 Kg)
Approval Bodies
Approved as explosionproof and intrinsically safe for use in Class I, Division 1, Groups
A, B, C, D locations, and nonincendive for Class I, Division 2, Groups A, B, C, D
locations. Approved EEx ia IIC T5 and EEx d IIC T6 per CENELEC standards; and Ex
N II T5 per BS 6941.
Series 900 with HC (HART) compatibility is self-certified for Zone 2, T5, maximum
42V/22 mA.
34-ST-03-65
Page 8
24264
Figure 3—Examples of typical mounting positions
34-ST-03-65
Page 9
Reference Dimensions:
With
Smart
meter
millimeters
inches
82.9
3.26
Removal
Clearance
for All Caps
45.7
1.8
94.9
3.74
53.1
2.09
65.1
2.56
Without
meter
Without
meter
3.6
0.14 Plug
135
5.32
55.3
2.18
23.5
.925
214
8.43
Optional
Meters
Optional
external
ground
125.2
4.93
Rotational
Lock
67
2.64
Optional Adapter
for 1/2-inch NPT
See Detail "A"
53.9
2.12
32.5
1.28
93.6
3.69
129
5.08
Detail A
53.9
2.12
High Pressure
Connection
1/2-inch NPT
Low Pressure
Connection
1/2-inch NPT
53.9
2.12
1.5
0.06
24258
Figure 4—Typical models STD924 and STD930-A, B, E, F, J (SS, Hastelloy C) mounting dimensions for
reference.
34-ST-03-65
Page 10
Reference Dimensions:
With Smart meter
millimeters
inches
82.9
3.26
Removal
45.7
Clearance
1.8
for All Caps
94.9
3.74
53.1
2.09
65.1
2.56
Without
meter
Without
meter
With
Analog
meter
3.6
Plug
0.14
135
5.32
55.3
2.18
Optional
meters
23.5
.925
Optional
external
ground
266.6
10.5
Rotational lock
168.8
6.65
85
3.35 SQ
Optional Adapter for
1/2-inch NPT
See Detail "A"
Plug
32.5
1.28
100
3.94
53.9
2.12
121.4
4.78
Detail A
53.9
2.12
High Pressure
Connection
1/2-inch NPT
Low Pressure
Connection
1/2-inch NPT
53.9
2.12
1.5
0.06
24259
Figure 5—Typical models STD924 and STD930-C, D, G, H, K, L (Monel, Tantalum), and model STD974
mounting dimensions for reference
34-ST-03-65
Page 11
Options
Ordering Information
Mounting Bracket
Tagging (Option TG)
The angle mounting bracket is
available in either zinc-plated
carbon steel or stainless steel and
is suitable for horizontal or vertical
mounting on a two inch (50
millimeter) pipe, as well as wall
mounting. An optional flat
mounting bracket is also available
in carbon steel for two inch (50
millimeter) pipe mounting.
Up to 30 characters can be added
on the stainless steel nameplate
In the U.S.:
mounted on the transmitter’s
Honeywell
electronics housing at no extra cost.
Industrial Automation & Control
Note that a separate nameplate on
16404 N. Black Canyon Highway
the meter body contains the serial
Phoenix, AZ 85023
number and body-related data. A
1-800-288-7491
stainless steel wired on tag with
additional data of up to 4 lines of 28
In Canada:
characters is also available. The
The Honeywell Centre
number of characters for tagging
155
Gordon Baker Rd.
includes spaces.
North York, Ontario
M2H 3N7
Transmitter Configuration
1-800-461-0013
(Option TC)
The factory can configure the
In Latin America:
transmitter linear/square root
Honeywell Inc.
extraction, damping time, LRV,
480
Sawgrass
Corporate Parkway,
URV and mode (analog/digital) and
Suite
200
enter an ID tag of up to eight
Sunrise,
FL
33325
characters and scratchpad
(954)
845-2600
information as specified.
Indicating Meter
Two integral meter options are
available. An analog meter (option
ME) is available with a 0 to 100%
linear scale. The Smart Meter
(option SM) provides an LCD
display for both analog and digital
output and can be configured to
display pressure in pre-selected
engineering units.
Lightning Protection
A terminal block is available with
circuitry that protects the
transmitter from transient surges
induced by nearby lightning
strikes.
HART Protocol Compatibility
(Option HC)
An optional electronics module is
available for the Series 900 that
provides HART Protocol
compatibility. Transmitters with the
HART Option are compatible with
the AMS System. (Contact your
AMS Supplier if an upgrade is
required.)
Custom Calibration and ID in
Memory (Option CC)
The factory can calibrate any range
within the scope of the transmitter’s
range and enter an ID tag of up to
eight characters in the transmitter’s
memory.
FOUNDATION Fieldbus
(Option FF)
Equips transmitter with FF
protocol for use in 31.25 kbit/s
FF networks. See document
34-ST-03-72 for additional
information on ST 3000
Fieldbus transmitters.
Configuration of the HART Option
transmitter is accomplished using a
Universal HART Communicator. For
full functionality the communicator
must contain the Honeywell Device
Description (DD). Contact your
nearest Honeywell office or
distributor for further information
regarding this option.
Specifications are subject to change without notice.
(Note that specifications may differ slightly for transmitters manufactured before
October 30, 1995.)
Contact your nearest Honeywell
sales office, or
In Europe:
Honeywell PACE
1, Avenue du Bourget
B-1140 Brussels, Belgium
[32-2] 728-2111
In Asia:
Honeywell Asia Pacific Inc.
Room 3213-25
Sun Hung Kai Centre
No. 30 Harbour Road
Wanchai, Hong Kong
2829-8298
In the Pacific:
Honeywell Limited
5 Thomas Holt Drive
North Ryde NSW 2113
Australia
(61 2) 9353 7000
Or, visit Honeywell on the World
Wide Web at:
http://www.honeywell.com
34-ST-03-65
Page 12
Model Selection Guide
34-ST-16-24
Instructions
Select the desired Key Number. The arrow to the right marks the selection available.
Make one selection from each table, I and II, using the column below the proper arrow.
Select as many Table III options as desired (if no options are desired, specify 00).
A dot denotes unrestricted availability. A letter denotes restricted availability.
Restrictions follow Table IV.
Key Number
______
I
-
___
II
-
_____
III (Optional)
-
_ _, _ _ _ _
KEY NUMBER
IV
+
XXXX
Selection
Span
0-10" to 0-400" H2O/0-25 to 0-1000 mbar
Body Rating: 3000 psi (210 bar)
0-5 to 0-100 psi/0-0.34 to 0-7 bar
Body Rating: 3000 psi (210 bar)
0-100 to 0-3000 psi/0-7 to 0-210 bar
Body Rating: 3000 psi (210 bar)
Availability
STD924
STD930
STD974
TABLE I - METER BODY
Wetted
Process Heads
Material
of
Construction
Carbon Steel *
Carbon Steel *
Carbon Steel *
Carbon Steel *
316 St. St.
316 St. St.
316 St. St.
316 St. St.
Hastelloy C
Hastelloy C
Monel
Vent/Drain
Valves **
and Plugs
Barrier
Diaphragms
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
316 St. St.
Hastelloy C
Hastelloy C
Monel
316 LSS
Hastelloy C
Monel
Tantalum
316 LSS
Hastelloy C
Monel
Tantalum
Hastelloy C
Tantalum
Monel
Fill Fluid
Silicone
CTFE
Process Head
Configuration
1/4" NPT
1/2" NPT with Adapter (on 1/4" NPT Head)
TABLE II
No Selection
* Carbon Steel heads are zinc-plated.
A__
B__
C__
D__
E__
F__
G__
H__
J__
K__
L__
v
v
v
v
v
t
t
_1_
_2_
__A
__H
t
00000
Not recommended for water service due to hydrogen migration.
Use Stainless Steel heads.
** Vent/Drains are Teflon coated for lubricity.
34-ST-03-65
Page 13
Model Selection Guide, continued
Availability
STD9
TABLE III - OPTIONS
None
Adapter Flange - 1/2" NPT St. Steel
Adapter Flange - 1/2" NPT Hastelloy-C
Adapter Flange - 1/2" NPT Monel
Modified DIN Process Heads - 316SS
Viton Head Gaskets (1/2" adapter gaskets are special)
Mounting Bracket - Carbon Steel
Mounting Bracket - ST. ST.
Flat Mounting Bracket - Carbon Steel
316 ST.ST. Electronics Housing with M20 Conduit Connections
1/2" NPT to M20 316SS Conduit Adapter (BASEEFA EEx d IIC)
1/2" NPT to 3/4" NPT 316 SS Conduit Adapter
Lightning Protection
Analog Meter (0-100 Even 0-10 Square Root)
Smart Meter
Local Zero
Local Zero and Span
A286SS (NACE) Bolts and 302/304SS (NACE) Nuts for Heads and
316SS (NACE) Bolts for Adapters
Stainless Steel Customer Wired-On Tag
(4 lines, 28 characters per line, customer supplied information)
Stainless Steel Customer Wired-On Tag (blank)
Custom Calibration and I.D. in Memory
Transmitter Configuration
Write Protection
Additional Warranty - 1 year
Additional Warranty - 2 years
Additional Warranty - 3 years
Additional Warranty - 4 years
Clean Transmitter for Oxygen or Chlorine Service with Certificate
Over-Pressure Leak Test with F3392 Certificate
Side Vent/Drain (End Vent Drain is standard)
SS Center Vent Drain and Bushing
Blind DIN SS Flanges Mounted with NACE Bolts
Low Temperature - -50oC Ambient Limit
Calibration Test Report and Certificate of Conformance (F3399)
Certificate of Conformance (F3391)
Certificate of Origin (F0195)
NACE Certificate (F0198)
HART® Protocol Compatible Electronics
FOUNDATION Fieldbus Communications
Selection
00
S2
T2
V2
DN
VT
MB
SB
FB
SH
A1
A2
LP
ME
SM
LZ
ZS
CR
24 30 74
c
c
c
w
z
c
c
c
w
z
c
c
c
w
z
b
b
m m m
n n n
u u u
b
b
x
s
x
s
x
s
TG
TB
CC
TC
WP
W1
W2
W3
W4
0X
TP
SV
CV
B2
LT
F1
F3
F5
F7
HC
FF
b
j
j
j
g g y
g g
d d d
b
b
o o o
e e e
r r r
b
34-ST-03-65
Page 14
Model Selection Guide, continued
Availability
STD9
TABLE III - OPTIONS (continued)
Approval
Body
Approval Type
No hazardous location approvals
Explosion Proof
Factory
Dust Ignition Proof
Mutual
Non-Incendive
Intrinsically Safe
CSA
Explosion Proof
Dust Ignition Proof
Intrinsically Safe
Zone 2
(Europe)
Self-Declared
per 94/9/EC
(ATEX4)
SA
Intrinsically Safe
(Australia) Non-Incendive
Flame Proof
Flame Proof
LCIE
Intrinsically Safe
CENELEC Flame Proof
Intrinsically Safe
TABLE IV
Factory Identification
Selection
24 30 74
Location or Classification
9X
Class I, Div. 1, Groups A,B,C,D
Class II, III Div. 1, Groups E,F,G
Class I, Div. 2, Groups A,B,C,D
Class I, II, III, Div. 1, Groups
A,B,C,D,E,F,G
Class I, Div. 1, Groups B,C,D
Class II, III, Div. 1, Groups E,F,G
Class I, II, III, Div. 1, Groups
A,B,C,D,E,F,G
Ex II 3 GD T (1) X
(1) T4 at Tamb. 93oC, T5 at Tamb.
80oC, T6 at Tamb. 65oC
Ex ia IIC T4
Ex n IIC T6 (T4 with SM option)
Ex d IIC T6
EEx d IIC T6
EEx ia IIC T5
EEx d IIC T6
EEx ia IIC T5
1C
b
2J
3N
4H
a
a
a
3A
f
f
f
3D
3S
XXXX
h
k
34-ST-03-65
Page 15
Model Selection Guide, continued
RESTRICTIONS
Restriction
Letter
a
b
c
d
e
f
g
h
j
k
m
n
o
r
s
t
u
v
w
x
y
z
Note:
Table
Available Only With
Not Available With
Selection
Table
Selection
Approval Body pending
Select only one option from this group
__H
I
I
III
lll
III
E _ A, F _ A, G _ A, H _ A
DN
1C, 2J, 3D, 3N, 9X
HC
I
I
_2_
C _ _, G _ _, L _ _
III
III
III
I
III
I
STD930-C _ _, G _ _, L _ _
K _ _, L _ _
includes side vent
no price add
C _ _, G _ _, L _ _
III
III
ZS, 1C, 2J
1C, 2J
III
III
TC, ME
FF, ME
I
I
CR or B2
Select from Table III S2, T2, V2
1C, 2J
Includes side vent drain - no price add
E _ A, F _ A, G _ A, H _ A
III
FF, SM
I
III
I
SV
J_ _, includes
side vent, no price add
DN
B _ _, D _ _, F _ _, H _ _,
J _ _, K _ _
See 13:ST-27 for Published Specials with pricing.
See 13:ST-29 and User’s Manual for part numbers.
See 13:ST-OE-9 for OMS Order Entry Information including TC, manuals,
certificates, drawings and SPINS.
See 13:ST-OD-1 for tagging, ID, Transmitter Configuration (TC) and
calibration including factory default values.
To request a quotation for a non-published "special", fax RFQ to Marketing
Applications.
34-ST-03-65
Page 16
Industrial Automation and Control
Honeywell Inc.
16404 North Black Canyon Highway
Phoenix, Arizona 85023-3099
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement