ST 3000 Smart Transmitter Series 900 Flange Mounted Liquid Level

ST 3000 Smart Transmitter Series 900 Flange Mounted Liquid Level
ST 3000 Smart Transmitter Series 900
Flange Mounted Liquid Level Models
Specifications
34-ST-03-68 August 2011
Introduction
In 1983, Honeywell introduced the first Smart Pressure
Transmitter― the ST 3000®. In 1989, Honeywell launched
the first all digital, bi-directional protocol for smart field
devices. Today, its ST 3000 Series 900 Flange-mount
Pressure Transmitters continue to bring proven “smart”
technology to a wide spectrum of pressure measurement
applications. Flange-mount transmitters are offered with a
variety of tank connections including ANSI flanges.
Applications include gauge pressure measurement in
pressure vessels in the chemical industry as well as level
applications in both the chemical and hydrocarbon
processing industries with either wet or dry legs on the low
side. Versatility is made possible though compound
characterization of the meter body as well as the ability to
measure a broad range of differential pressures.
Figure 1—On the left is Model STF92F and STF93F and on the
right is Model STF924 and STF932 (Extended Diaphragm).
All Series 900 Flange Mounted Pressure Transmitters feature
proven piezoresistive sensor technology.
Models
STF924
0 to 400 inH2O
0 to 1,000 mbar
STF932
0 to 100 psi
0 to 7 bar
STF92F
0 to 400 inH2O
0 to 1,000 mbar
smart performance at analog prices. Accurate, reliable and
STF93F
0 to 100 psi
0 to 7 bar
stable, Series 900 transmitters offer greater turndown ratio
All ST 3000 transmitters can be ordered to provide one of
the following output communication options. When digitally
integrated with Honeywell’s Process Knowledge System™,
EXPERION PKS™, ST 3000 instruments provide a more
accurate process variable as well as advanced diagnostics.
Honeywell’s cost-effective ST 3000 S900 transmitters lead
the industry in Stability and Reliability.
The devices provide comprehensive self-diagnostics to help
users maintain high uptime, meet regulatory requirements,
and attain high quality standards. S900 transmitters allow
than conventional transmitters.
Communications options
4-20 mA
Honeywell Digitally Enhanced (DE)
HART® (versions 5.x or 6.x)
FOUNDATION™ Fieldbus
ST 3000 S900 Transmitter Benefits
Stability = ±0.01% per year
Reliability = 470 years MTBF
2
Description
The ST 3000 transmitter can replace any 4 to 20 mA output
ST 3000 Smart Pressure Transmitter
Features

simple configuration selection.
transmitter in use today and operates over a standard twowire system.
Choice of linear or square root output conformity is a

Direct digital integration with Experion PKS and other
control systems provides local measurement accuracy
The measuring means is a piezoresistive sensor, which
to the system level without adding typical A/D and D/A
actually contains three sensors in one. It contains a
converter inaccuracies.
differential pressure sensor, a temperature sensor, and a
static pressure sensor.

compensates input for temperature and static pressure.
Added “smart” features include configuring lower and
Microprocessor-based electronics provide higher span-
upper range values, simulating accurate analog output,
turndown ratio, improved temperature and pressure
and selecting preprogrammed engineering units for
compensation, and improved accuracy.
The transmitter’s meter body and electronics housing resist
display.

Smart transmitter capabilities with local or remote
interfacing means significant manpower efficiency
shock, vibration, corrosion, and moisture. The electronics
improvements in commissioning, start-up, and ongoing
housing contains a compartment for the single-board
maintenance functions.
electronics, which is isolated from an integral junction box.
The single-board electronics is replaceable and
Unique piezoresistive sensor automatically
 ST 3000 transmitters feature full Dual-Seal certification
interchangeable with any other ST 3000 Series 100 or
based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.01
Series 900 model transmitters.
requirements without the use of additional seal
protection elements.
Like other Honeywell transmitters, the ST 3000 features

two-way communication and configuration capability
ST 3000 transmitters are available fully compliant to
SIL 2/3 requirements as a standard option.
between the operator and the transmitter through several
Honeywell field-rated portable configuration devices,
including the Smart Field Communicator (SFC) and the
Multiple Communication Configurator (MC ToolKit). While
both are made for in-field use, the MC Toolkit also can be
ordered for use in intrinsically safe environments.
The SCT 3000 Smartline® Configuration Toolkit provides an
easy way to configure instruments using a personal
computer. The toolkit enables configuration of devices
Advanced Diagnostics
ST 3000 is now available for both HART® 6 and
FoundationTM Fieldbus with advanced diagnostics that
minimize unplanned plant outages, minimize maintenance
costs and by providing the industry’s most reliable
transmitter.

Provide advanced warning of possible failure events
and avoid costly shutdowns.
before shipping or installation. The SCT 3000 can operate

Three levels of failure reporting
in the offline mode to configure an unlimited number of

Comprehensive list of on-board diagnostics (Ref. ST
devices. The database can then be loaded down-line during
3000 User manual with HART® 6, 34-ST-25-17 Rev:
commissioning.
June 09 and Foundation
TM
ST-25-15 Rev: June09)
Fieldbus option manual 34-
ST 3000 Smart Pressure Transmitter
3
Operating Conditions – All Models
Reference
Condition (at
zero static)
Parameter
Ambient Temperature
Rated Condition
C
F
C
25±1
77±2
-40 to 85
Operative Limits
F
-40 to 158
-55 to 125 -67 to 257
-40 to 125
-40 to 257
-55 to 125 -67 to 257
-40 to 175†
-40 to 350† -55 to 125 -67 to 257
-40 to 110
Process Interface
Temperature
STF924, STF932 only
25±1
77±2
-40 to 110** -40 to 230**
Minimum Pressure
mmHg absolute
inH2O absolute
Supply Voltage, Current,
and Load Resistance
*
F
-40 to 185
77±2
%RH
C
-40 to 85
25±1
Humidity
F
*
Meter Body Temperature
*
C
Transportation and
Storage
-40 to 230
10 to 55
0 to 100
0 to 100
Atmospheric
Atmospheric
25
13
2 (short term ) ††
1 (short term ) ††
0 to 100
Voltage Range: 10.8 to 42.4 Vdc at terminals
Current Range: 3.0 to 21.8 mA
Load Resistance: 0 to 1,440 ohms (as shown in Figure 2)
For model STF932 with CTFE fill fluid, the rating is –15 to 110°C (5 to 230°F); for models STF92F and STF93F with
CTFE fill fluid, the rating is –15 to 70°C (5 to 158°F).
**
For model STF932 with CTFE fill fluid, the rating is –15 to 110°C (5 to 230°F).
†
For CTFE fill fluid, the maximum temperature rating is 150°C (300°F).
††
Short term equals 2 hours at 70°C (158°F)
Maximum Allowable Working Pressure (MAWP)3,4
(ST 3000 products are rated to Maximum Allowable Working Pressure. MAWP depends on Approval Agency and transmitter materials of construction.)
STF 924, STF 932
Flange
Material
Ambient
Temperature
Maximum
Meterbody
Temperature
-29 to 38C
[-20 to 100F]
125C [257F]
Process Interface
Temperature
175C [350F]
ANSI Class 150
Carbon Steel
285 [19.6]
245 [16.9]
215 [14.8]
psi [ bar]
304 S.S.
275 [19.0]
218 [15.0]
198 [13.7]
316 S.S.
275 [19.0]
225 [15.5]
205 [14.1]
ANSI Class 300
Carbon Steel
740 [51.0]
668 [46.0]
645 [44.5]
psi [bar]
304 S.S.
720 [49.6]
570 [39.3]
518 [35.7]
316 S.S.
720 [49.6]
590 [40.7]
538 [37.1]
DN PN40
psi [bar]
STF92F, STF93F
ANSI Class 150
psi [bar]
580 [40.0]
1
574 [39.6]
559 [38.5]
304 S.S.
534 [36.8]
1
419 [28.9]
385 [26.5]
316 S.S.
534 [36.8] 1
434 [29.9]
399 [27.5]
230 [15.9]
185 [12.8]
No rating at this temp
Carbon Steel
316L Stainless
Steel
1
Ambient Temperature for DN PN40 is –10 to 50 C [14 to 122 F]
3
MAWP applies for temperature range -40 to 125C. However, Static Pressure Limit is de-rated to 3,000 psi from -26C to -40C.
4
Consult factory for MAWP of ST 3000 transmitters with CSA approval.
Use of graphite o-rings de-rates transmitter to 3,625 psi. Use of adaptor with graphite o-rings de-rates transmitter to 3,000 psi.
4
ST 3000 Smart Pressure Transmitter
1440
1200
Loop
Resistance
(ohms)
Note: A minimum of 250 ohms
of loop resistance is necessary
to support communications.
Loop resistance equals barrier
resistance plus wire resistance
plus receiver resistance.
800
650
450
250
= Operating Area
0
10.8
16.28 20.63 25
28.3
37.0
42.4
Operating Voltage (Vdc)
Figure 2 —Supply voltage and loop resistance chart
ST 3000 Smart Pressure Transmitter
5
Performance Under Rated Conditions* - Model STF924 (0 to 400 inH2O/1,000 mbar)
Parameter
Description
Upper Range Limit
inH2O
mbar
400 (39.2°F/4°C is standard reference temperature for inH2O range.)
1,000
Minimum Span
inH2O
mbar
4
10
Turndown Ratio
100 to 1
Zero Elevation and Suppression
No limit except minimum span within ±100% URL. Specifications valid from –100% to
+ 100% URL.
In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (25 inH2O), accuracy equals:
Accuracy (Reference – Includes
combined effects of linearity,
hysteresis, and repeatability)
• Accuracy includes residual error
after averaging successive
readings.
• For FOUNDATIONTM Fieldbus use
Digital Mode specifications.
®
• For HART use Analog Mode
specifications.

 25 inH 2 O 
or
 span inH O 

2 
 0.05  0.05



In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (25 inH2O), accuracy equals:

 25 inH 2 O 
 span inH O  or

2 
 0.025  0.05

Zero Temperature Effect per
28C (50F)
 62.5 mbar  in % of span

 span mbar 
 0.05  0.05

 62.5

 span
 0.025  0.05
 in % of span

mbar 
mbar
In Analog Mode: ±0.2625% of span.
For URV below reference point (50 inH2O), effect equals:

 50 inH 2 O  or
 span inH O 

2 
 0.0125  0.25 

 125 mbar  in % of span

 span mbar 

 0.0125  0.25 

In Digital Mode: ±0.25% of span.
For span below reference point (50 inH2O), effect equals:
50 inH2O
125 mbar
±0.25  span inH O or ±0.25 span mbar in % of span

2 
(
Combined Zero and Span
Temperature Effect per 28C
(50F)
)
In Analog Mode: ±0.50% of span.
For URV below reference point (50 inH2O), effect equals:

 50 inH 2 O 
or
 span inH O 

2 
 0.25  0.25


 125 mbar  in % of span

 span mbar 
 0.25  0.25

In Digital Mode: ±0.475% of span.
For span below reference point (50 inH2O), effect equals:

 50 inH 2 O 
or
 span inH O 

2 
 0.225  0.25

Zero Static Pressure Effect
per 300 psi (20 bar)


 50 inH2O 
or
 span inH O 

2 




 span
 0.0125  0.20 
 in % of span

mbar  
125 mbar
±0.40% of span.
For URV below reference point (50 inH2O), effect equals:

 50 inH 2 O  or
 span inH O 

2 
 0.20  0.20 

Stability
 125 mbar  in % of span

 span mbar 
±0.2125% of span.
For URV below reference point (50 inH2O), effect equals:
 0.0125  0.20 
Combined Zero and Span
Static Pressure Effect per 300
psi (20 bar)

 0.225  0.25

 125 mbar   in % of span

 span mbar  
 0.20  0.20 

±0.015% of URL per year
* Performance specifications are based on reference conditions of 25°C (77°F), zero (0) static pressure, 10 to 55% RH, and
316L Stainless Steel barrier diaphragm.
6
ST 3000 Smart Pressure Transmitter
Performance Under Rated Conditions* - Model STF932 (0 to 100 psi/7 bar)
Parameter
Description
Upper Range Limit
psi
bar
100
7
Minimum Span
psi
bar
1
0.07
Turndown Ratio
Zero Elevation and
Suppression
Accuracy (Reference – Includes
combined effects of linearity,
hysteresis, and repeatability)
• Accuracy includes residual error
after averaging successive
readings.
• For FOUNDATIONTM Fieldbus use
Digital Mode specifications.
• For HART® use Analog Mode
specifications.
100 to 1
No limit except minimum span within ±100% URL. Specifications valid from –100% to
+ 100% URL.
In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (20 psi), accuracy equals:

 or

 span psi 

20 psi
 0.05  0.05


 1.4 mbar  in % of span

 span mbar 

In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever
is greater, terminal based.
For URV below reference point (20 psi), accuracy equals:

 or

 span psi 

20 psi
 0.025  0.05


Zero Temperature Effect per
28C (50F)

 0.05  0.05

 1.4 mbar  in % of span

 span mbar 
 0.025  0.05

In Analog Mode: ±0.2625% of span.
For URV below reference point (30 psi), effect equals:



 span
 0.0125  0.25

 or

psi 
30 psi



 span
 in % of span

bar  
2 bar
 0.0125  0.25 
In Digital Mode: ±0.25% of span.
For URV below reference point (30 psi), effect equals:
30 psi
2 bar
±0.25 span psi or ±0.25 span bar in % of span
(
Combined Zero and Span
Temperature Effect per 28C
(50F)
)
(
)
In Analog Mode: ±0.50% of span.
For URV below reference point (30 psi), effect equals:



 span
 0.25  0.25 

 or

psi 
30 psi

 2 bar  in % of span

 span bar 
 0.25  0.25

In Digital Mode: ±0.475% of span.
For URV below reference point (30 psi), effect equals:



 span
Zero Static Pressure Effect per
300 psi (20 bar)



 span
 2 bar  in % of span

 span bar 

 or

psi 
30 psi



 span
 0.0125  0.20 
 in % of span

bar  
2 bar
±0.40% of span.
For URV below reference point (30 psi), effect equals:



 span
 0.20  0.20 

Stability

 0.225  0.25 
±0.2125% of span.
For URV below reference point (30 psi), effect equals:
 0.0125  0.20 

Span Static Pressure Effect per
300 psi (20 bar)
 or

psi 
30 psi
 0.225  0.25 

 or

psi 
30 psi

 2 bar  in % of span

 span bar 
 0.20  0.20 

±0.04% of URL per year
* Performance specifications are based on reference conditions of 25°C (77°F), zero (0) static pressure, 10 to 55% RH, and
316L Stainless Steel barrier diaphragm.
ST 3000 Smart Pressure Transmitter
7
Performance Under Rated Conditions* - Model STF92F (0 to 400 inH2O/25 mbar)
Parameter
Description
Upper Range Limit
inH2O
mbar
400 (39.2°F/4°C is standard reference temperature for inH2O range.)
1000
Minimum Span
inH2O
mbar
4
10
Turndown Ratio
100 to 1
Zero Elevation and Suppression
–5 to +100% URL
In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (25 inH2O), accuracy equals:
Accuracy (Reference – Includes
combined effects of linearity,
hysteresis, and repeatability)
• Accuracy includes residual error
after averaging successive
readings.
• For FOUNDATIONTM Fieldbus use
Digital Mode specifications.
®
• For HART use Analog Mode
specifications.

 25 inH 2 O 
or
 span inH O 

2 
 0.05  0.05

 62.5

 span
 in % of span

mbar 
mbar
In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (25 inH2O), accuracy equals:

 25 inH 2 O 
 span inH O  or

2 

 0.025  0.05

Zero Temperature Effect per
28C (50F)

 0.05  0.05
 62.5 mbar  in % of span

 span mbar 
 0.025  0.05

In Analog Mode: ±0.1625% of span.
For URV below reference point (50 inH2O), effect equals:

 50 inH 2 O  or
 span inH O 

2 

 125 mbar  in % of span

 span mbar 

 0.0125  0.15 
 0.0125  0.15 

In Digital Mode: ±0.15% of span.
For URV below reference point (50 inH2O), effect equals:
50 inH2O
125 mbar
±0.15  span inH O or ±0.15 span mbar in % of span

2 
(
Combined Zero and Span
Temperature Effect per 28C
(50F)
)
In Analog Mode: ±0.25% of span.
For URV below reference point (50 inH2O), effect equals:

 50 inH2O 
or
 span inH O 

2 
 0.10  0.15




 span
 0.10  0.15 
 in % of span

mbar  
125 mbar
In Digital Mode: ±0.225% of span.
For URV below reference point (50 inH2O), effect equals:

 50 inH2O 
or
 span inH O 

2 
 0.075  0.15 

Zero Static Pressure Effect per
1,000 psi (70 bar)

 50 inH 2 O 
or
 span inH O 

2 


 span
 in % of span

mbar  
125 mbar

 125 mbar  in % of span

 span mbar 
 0.0125  0.15 

±0.30% of span.
For URV below reference point (50 inH2O), effect equals:

 50 inH 2 O 
or
 span inH O 

2 
 0.15  0.15 

Stability

±0.1625% of span.
For URV below reference point (50 inH2O), effect equals:
 0.0125  0.15 
Combined Zero and Span Static
Pressure Effect per 1,000 psi (70
bar)

 0.075  0.15 

 125 mbar  in % of span

 span mbar 
 0.15  0.15 

±0.015% URL per year
* Performance specifications are based on reference conditions of 25C (77F), zero (0) static pressure, 10 to 55% RH, and
316 Stainless Steel barrier diaphragm.
8
ST 3000 Smart Pressure Transmitter
Performance Under Rated Conditions* - Model STF93F (0 to 100 psi/7 bar)
Parameter
Description
Upper Range Limit
psi
bar
100
7
Minimum Span
psi
bar
1
0.07
Turndown Ratio
100 to 1
Zero Elevation and Suppression
–5 to +100% URL
Accuracy (Reference – Includes
combined effects of linearity,
hysteresis, and repeatability)
• Accuracy includes residual error
after averaging successive
readings.
TM
• For FOUNDATION Fieldbus use
Digital Mode specifications.
• For HART® use Analog Mode
specifications.
In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (20 psi), accuracy equals:

 or

 span psi 

20 psi
 0.05  0.05




 span
 in % of span

mbar 
1.4 mbar
In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is
greater, terminal based.
For URV below reference point (20 psi), accuracy equals:

 or

 span psi 

 0.025  0.05


Zero Temperature Effect per
28C (50F)

 0.05  0.05
20 psi

 1.4 mbar  in % of span

 span mbar 
 0.025  0.05

In Analog Mode: ±0.1625% of span.
For URV below reference point (30 psi), effect equals:



 span psi 
 0.0125  0.15 

30 psi
 or


 2 bar  in % of span

 span bar 
 0.0125  0.15 

In Digital Mode: ±0.15% of span.
For URV below reference point (30 psi), effect equals:
±0.15
Combined Zero and Span
Temperature Effect per 28C
(50F)
30 psi
2 bar
( span
psi) or ±0.15 ( span bar) in % of span
In Analog Mode: ±0.25% of span.
For URV below reference point (30 psi), effect equals:



 span
 or

psi 
30 psi
 0.10  0.15 


 2 bar  in % of span

 span bar 
 0.10  0.15 

In Digital Mode: ±0.225% of span.
For URV below reference point (30 psi), effect equals:



 span
Zero Static Pressure Effect per
1,000 psi (70 bar)



 span
 2 bar  in % of span

 span bar 

 or

psi 
30 psi



 span
 0.0125  0.15 
 in % of span

bar  
2 bar
±0.30% of span.
For URV below reference point (30 psi), effect equals:



 span
 0.15  0.15 

Stability

 0.075  0.15 
±0.1625% of span.
For URV below reference point (30 psi), effect equals:
 0.0125  0.15 

Combined Zero and Span Static
Pressure Effect per 1,000 psi (70
bar)
 or

psi 
30 psi
 0.075  0.15 

 or

psi 
30 psi

 2 bar  in % of span

 span bar 
 0.15  0.15 

±0.04% of URL per year.
* Performance specifications are based on reference conditions of 25°C (77°F), zero (0) static pressure, 10 to 55% RH, and
316L Stainless Steel barrier diaphragm.
ST 3000 Smart Pressure Transmitter
9
Performance Under Rated Conditions – All Models
Parameter
Description
TM
Output (two-wire)
Analog 4 to 20 mA or DE digital communications mode. Options available for FOUNDATION
®
Fieldbus and HART protocol.
Supply Voltage Effect
0.005% of span per volt.
Damping Time Constant
Adjustable from 0 to 32 seconds digital damping.
NAMUR NE 43 Compliance Option
Transmitter failure information is generated when the measuring information is invalid or no longer
present. Failure information is transmitted as a current signal but outside the normal 4-20 mA
measurement signal level. Transmitter failure values are: ≤ 3.6 mA and ≥ 21.0 mA. The normal
signal range is ≥ 3.8 mA and ≤ 20.5 mA.
SIL 2/3 Compliance
SIL certified to IEC 61508 for non-redundant use in SIL 2 related Safety Systems (single use)
and for redundant (multiple) use in SIL 3 Safety Systems via Nord Sys Tec GmbH & Co.
KG under the following standards: IEC61508-1: 1998; IEC 61508-2: 2000; IEC61508-3:1998.
Lightning Protection Option
(Code “LP”)
Leakage Current:
10 microamps max. @ 42.4 VDC, 93°C
Impulse Rating:
(rise/decay)
10/20 µ sec.
10/1,000 µ sec.
5,000 Amps (50 strikes)
250 Amps (1000 strikes)
10,000 Amps (20 strikes)
500 Amps (400 strikes)
Physical and Approval Bodies
Parameter
Description
Barrier Diaphragms Material
(Wetted)
316L SS, Hastelloy C-276
Gasket Ring Material (Wetted)
316/316L SS, Hastelloy C-276*
Extension Tube Material (Wetted)
316 SS
Process Head and Adapter Flange
Material
316 SS , Carbon Steel (zinc-plated) , Hastelloy C-276*
Process Head Gaskets
Teflon is standard or Viton is optional
Meter Body Bolting
Carbon Steel (zinc plated) or 316 SS (NACE) bolts.
Mounting Flange
Flush or Extended Diaphragm: Zinc Chromate plated Carbon Steel , 304 SS, or
4
316 SS .
316L SS (NOTE: Mounting Flange is process wetted.)
®
2
®
2
4
4
5
®
®
6
®
5
STF924, STF932
STF92F, STF93F
Vent/Drain Valves & Plugs
1
4
®
2
®
316 SS , Hastelloy C-276 , Monel 400
8
®
Fill Fluid
Silicone DC 200 oil or CTFE (Chlorotrifluoroethylene)
Electronic Housing
Epoxy-Polyester hybrid paint. Low Copper-Aluminum. Meets NEMA 4X (watertight) and NEMA 7
(explosion proof). Stainless steel optional.
Process Head: 1/4-inch NPT; 1/2-inch NPT with adapter, standard option.
Process Connections
All Models
Flange: 2, 3 or 4-inch Class 150 or 300 ANSI; DN50-PN40, DN80-PN40 or DN100-PN40 DIN
flange.
STF924, STF932
Extended Diaphragm: 2, 4, or 6 inches (50, 101, 152 mm) long.
STF92F, STF93F
3-inch, Class 150 ANSI flange.
Wiring
Accepts up to 16 AWG (1.5 mm diameter).
Mounting
See Figure 3 for typical flange mounting arrangement.
Dimensions
See Figures 4, 5, and 6.
Flush or Extended Model:
Net Weight
STF924, STF932
15.5 to 35.0 pounds (7 to 16 kg) depending on flange size
STF92F, STF93F
14.2 to 18.4 pounds (6.5 to 9 kg) depending on flange size.
* Flush design only.
2
Hastelloy® C-276 or UNS N10276
4
Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS.
5
Carbon Steel heads are zinc-plated and not recommended for water service due to hydrogen migration. For that service, use 316 stainless steel wetted
Process Heads.
6
Hastelloy® C-276 or UNS N10276. Supplied as indicated or as Grade CW12MW, the casting equivalent of Hastelloy® C-276
8
Monel 400® or UNS N04400 or UNS N04405
NOTE: Pressure transmitters that are part of safety equipment for the protection of piping (systems) or vessel(s) from exceeding allowable
pressure limits, (equipment with safety functions in accordance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require
separate examination.
10
ST 3000 Smart Pressure Transmitter
Certifications
Type of Protection
Comm. Option
Explosionproof:
Class I, Division 1, Groups A, B, C, D
locations
Dust Ignition Proof:
Class II, III, Division 1, Groups E, F,
G locations,
Enclosure Type 4X
All
T4 Ta = 93ºC
4-20 mA /
Vmax = 30V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = 93ºC
Fieldbus – Entity
(Not FISCO)
Vmax = 32V
Imax = 120mA
Ci = 4.2nF
Li = 0
Pi =0.84W
T4 Ta = 40ºC
T3 Ta = 93ºC
Fieldbus – Entity
(Not FISCO)
Vmax = 24V
Imax = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T4 Ta = 40ºC
T3 Ta = 93ºC
FISCO
Vmax = 17.5V
Imax = 380mA
Ci = 4.2nF
Li = 0
Pi =5.32W
T4 Ta = 40ºC
T3 Ta = 93ºC
4-20 mA / DE
Vmax = 42.4V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = 93ºC
4-20 mA / HART
Vmax = 30V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = 93ºC
Fieldbus – Entity
(Not FNICO)
Vmax = 32V
Imax = 120mA
Ci = 4.2nF
Li = 0
Pi =0.84W
T4 Ta = 40ºC
T3 Ta = 93ºC
Fieldbus – Entity
(Not FNICO)
Vmax = 24V
Imax = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T4 Ta = 40ºC
T3 Ta = 93ºC
Vmax = 32V
Ci = 4.2nF
Li = 0
T4 Ta = 40ºC
T3 Ta = 93ºC
Intrinsically Safe:
Class 1, Zone 0, AEx ia Group IIC,
Enclosure Type 4X / IP 66/67
Nonincendive:
Class I, Division 2, Groups A, B, C, D
locations, Enclosure Type 4X
Nonincendive:
Class I, Division 2, Groups A, B, C,
D;
Suitable for:
Class II, Division 2, Groups F&G;
Class III, Division 2;
Class I, Zone 2, Group IIC,
Enclosure Type 4X / IP 66/67
* Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected.
FM ApprovalsSM is a service mark of FM Global
T5 Ta = 93ºC
4-20 mA / DE
Class I, II, III, Division 1, Groups A,
B, C, D, E, F, G locations, Enclosure
Type 4X
FM
SM
Approvals
All
Temp. Codes
Vmax = 42.4V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
Intrinsically Safe:
Class I, II, III, Division 1, Groups A,
B, C, D, E, F, G locations;
Field Parameters
FNICO
ST 3000 Smart Pressure Transmitter
Type of Protection
Explosion Proof: Class I, Division
1, Groups B, C, D locations
Dust Ignition Proof: Class II, III,
Division 1, Groups E, F, G
locations,
Enclosure Type 4X
11
Comm. Option
All
Canadian
Standards
Association
(CSA)
Canadian Registration Number
(CRN):
T4 Ta = 93ºC
4-20 mA / DE
T4 Ta = 93ºC
4-20 mA / HART
Vmax = 42V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = 93ºC
Fieldbus – Entity
(Not FISCO)
Vmax = 24V
Imax = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T4 Ta = 40ºC
T3 Ta = 93ºC
4-20 mA / DE
Vmax = 42.4V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = 93ºC
4-20 mA / HART
Vmax = 30V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = 93ºC
Fieldbus – Entity
(Not FNICO)
Vmax = 24V
Imax = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T4 Ta = 40ºC
T3 Ta = 93ºC
Nonincendive:
Class I, Division 2, Groups A, B, C,
D locations, Enclosure Type 4X
All
Temp. Codes
Vmax = 42V
Imax = 225mA
Ci = 4.2nF
Li = *
Pi =1.2W
Intrinsically Safe:
Class I, II, III, Division 1, Groups A,
B, C, D, E, F, G locations,
Enclosure Type 4X
Field Parameters
All ST 3000 models except STG19L, STG99L, STG170 and STG180
have been registered in all provinces and territories in Canada and are
marked CRN: 0F8914.5C.
12
ST 3000 Smart Pressure Transmitter
Type of Protection
Comm. Option
Field Parameters
Flameproof, Zone 1:
All
All
Ex d IIC, Enclosure IP 66/67
IECEx
International
Electrotechnical
Commission
(LCIE)
T5 Ta = –50 to 93ºC
T6 Ta = –50 to 78ºC
4-20 mA / DE
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 85ºC
T6 Ta = –50 to 70ºC
4-20 mA / HART
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 63ºC
T6 Ta = –50 to 48ºC
Fieldbus
(Not FISCO)
Ui = 24V
Ii = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T3 Ta = –50 to 93ºC
T4 Ta = –50 to 40ºC
Intrinsically Safe, Zone 0/1:
Ex ia IIC, Enclosure IP 66/67
Temp. Codes
* Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected.
Type of Protection
Flameproof, Zone 1:
Ex d IIC, Enclosure IP 66/67
Intrinsically Safe, Zone 0/1:
Ex ia IIC, Enclosure IP 66/67
SAEx
(South Africa)
All
Intrinsically Safe, Zone 0/1:
Ex ia IIC, Enclosure IP 66/67
NOTE: The user must determine the
type of protection required for
installation of the equipment. The user
shall then check the box [ √ ] adjacent
to the type of protection used on the
equipment certification nameplate.
Once a type of protection has been
checked on the nameplate,
subsequently the equipment shall not
be reinstalled using any of the other
certification types.
Field Parameters
All
Temp. Codes
T5 Ta = –50 to 93ºC
T6 Ta = –50 to 78ºC
4-20 mA / DE
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 85ºC
T6 Ta = –50 to 70ºC
4-20 mA / HART
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 63ºC
T6 Ta = –50 to 48ºC
Fieldbus
(Not FISCO)
Ui = 24V
Ii = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T3 Ta = –50 to 93ºC
T4 Ta = –50 to 40ºC
4-20 mA / DE
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 85ºC
T6 Ta = –50 to 70ºC
4-20 mA / HART
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 63ºC
T6 Ta = –50 to 48ºC
Fieldbus
(Not FISCO)
Ui = 24V
Ii = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T3 Ta = –50 to 93ºC
T4 Ta = –50 to 40ºC
Multiple Marking:
Flameproof, Zone 1:
Ex d IIC, Enclosure IP 66/67

Comm. Option
Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected
ST 3000 Smart Pressure Transmitter
Type of Protection
Flameproof, Zone 0:
, Ex tD
Enclosure IP 66/67
Flameproof, Zone 1:
, Ex d IIC, Ex tD
Enclosure IP 66/67
13
Comm. Option
Field Parameters
All
All
A20 IP6X T95ºC Ta = 93ºC
or T80ºC Ta = 78ºC
All
All
T5 Ta = –50 to +93ºC
T6 Ta = –50 to +78ºC,
A21 IP6X T95ºC Ta = 93ºC
or T80ºC Ta = 78ºC
4-20 mA / DE
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 85ºC
T6 Ta = –50 to 70ºC
4-20 mA / HART
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 63ºC
T6 Ta = –50 to 48ºC
Fieldbus
(Not FISCO)
Ui = 24V
Ii = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T3 Ta = –50 to 93ºC
T4 Ta = –50 to 40ºC
4-20 mA / DE
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 85ºC
T6 Ta = –50 to 70ºC
4-20 mA / HART
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 63ºC
T6 Ta = –50 to 48ºC
Fieldbus
(Not FNICO)
Ui = 24V
Ii = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T3 Ta = –50 to 93ºC
T4 Ta = –50 to 40ºC
4-20 mA / DE
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 85ºC
T6 Ta = –50 to 70ºC
4-20 mA / HART
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 63ºC
T6 Ta = –50 to 48ºC
Fieldbus
(Not FISCO/FNICO)
Ui = 24V
Ii = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T3 Ta = –50 to 93ºC
T4 Ta = –50 to 40ºC
Intrinsically Safe, Zone 0/1:
, Ex ia IIC,
Enclosure IP 66/67
Non-Sparking, Zone 2:
ATEX
(LCIE)
,Ex nA IIC
(Honeywell),
Enclosure IP 66/67
Multiple Marking:
Flameproof, Zone 1:
, Ex d IIC
Intrinsically Safe, Zone 0/1:
, Ex ia IIC
Non-Sparking, Zone 2:
, Ex nA IIC
NOTE: The user must determine
the type of protection required for
installation of the equipment. The
user shall then check the box [ √ ]
adjacent to the type of protection
used on the equipment certification
nameplate. Once a type of
protection has been checked on
the nameplate, subsequently the
equipment shall not be reinstalled
using any of the other certification
types.
* Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected.
Temp. Codes
14
ST 3000 Smart Pressure Transmitter
Type of Protection
Comm. Option
Field Parameters
Temp. Codes
All
All
T5 Ta = –50 to 93ºC
T6 Ta = –50 to 78ºC
Flameproof, Zone 1:
BR-Ex d IIC
Enclosure IP 66/67
INMETRO
(CERTUSP)
Brazil
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 85ºC
T6 Ta = –50 to 70ºC
4-20 mA / HART
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
T4 Ta = –50 to 93ºC
T5 Ta = –50 to 63ºC
T6 Ta = –50 to 48ºC
Fieldbus
(Not FISCO)
Ui = 24V
Ii = 250mA
Ci = 4.2nF
Li = 0
Pi =1.2W
T3 Ta = –50 to 93ºC
T4 Ta = –50 to 40ºC
Intrinsically Safe, Zone 0/1:
BR-Ex ia IIC
Enclosure IP 66/67

4-20 mA / DE
Ui = 30V
Ii = 100mA
Ci = 4.2nF
Li = *
Pi =1.2W
Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected.
This certificate defines the certifications covered for the ST 3000 Pressure Transmitter family of
products, including the SMV 3000 Smart Multivariable Transmitter. It represents the compilation
of the five certificates Honeywell currently has covering the certification of these products into
marine applications.
For ST 3000 Smart Pressure Transmitter and SMV 3000 Smart Multivarible Transmitter
American Bureau of Shipping (ABS) - 2009 Steel Vessel Rules 1-1-4/3.7, 4-6-2/5.15, 4-8-3/13
ST 3000 Pressure
& 13.5, 4-8-4/27.5.1, 4-9-7/13. Certificate number: 04-HS417416-PDA
Transmitter Marine
Certificate
Bureau Veritas (BV) - Product Code: 389:1H. Certificate number: 12660/B0 BV
(MT Option)
Det Norske Veritas (DNV) - Location Classes: Temperature D, Humidity B, Vibration A, EMC B,
Enclosure C. For salt spray exposure; enclosure of 316 SST or 2-part epoxy protection with 316
SST bolts to be applied. Certificate number: A-11476
Korean Register of Shipping (KR) - Certificate number: LOX17743-AE001
Lloyd's Register (LR) - Certificate number: 02/60001(E1) & (E2)
ST 3000 Smart Pressure Transmitter
15
The ST 3000 Smart Pressure Transmitters are in conformity with the essential requirements of the Pressure
Equipment Directive.
European
Pressure
Equipment
Directive (PED)
(97/23/EC)
Honeywell ST 3000 Smart Pressure Transmitters are designed and manufactured in accordance with the
applicable portions of Annex I, Essential Safety Requirements, and sound engineering practices. These
transmitters have no pressurized internal volume, or have a pressurized internal volume rated less than 200 bar
(2,900 psig), and/or have a maximum volume of less than 0.1 liter (Article 3, 1.1.(a) first indent, Group 1 fluids).
Therefore, these transmitters are not subject to the essential requirements of the directive 97/23/EC (PED,
Annex I) and shall not have the CE mark applied.
For transmitters rated > 200 bar (2,900 psig) < 1,000 bar (14,500 psig) Honeywell maintains a technical file in
accordance with Annex III, Module A, (internal production control) when the CE mark is required. Transmitter
Attachments: Diaphragm Seals, Process Flanges and Manifolds comply with Sound Engineering Practice.
NOTE: Pressure transmitters that are part of safety equipment for the protection of piping (systems) or
vessel(s) from exceeding allowable pressure limits, (equipment with safety functions in accordance with
Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination.
A formal statement from TÜV Industry Service Group of TÜV America, Inc., a division of TÜV Süddeutschland,
a Notified Body regarding the Pressure Equipment Directive, can be found at www.honeywell.com. A hard
copy may be obtained by contacting a Honeywell representative.
CE Mark
Dual Seal
Certification
Electro Magnetic Compatibility (EMC) (2004/108/EC)
All Models: EN 50081-1: 1992; EN 50082-2:1995; EN 61326-1:1997 + A1, A2, and A3 – Industrial Locations
Dual Seal Certification based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.01 requirements without the use of
additional seal protection elements.
Recommended
Frequency of
Calibration
Honeywell recommends verifying the calibration of these devices once every four years.
Approved
Manufacturing
Locations
Honeywell Process Solutions - York, PA USA
Honeywell (Tianjin) Limited – Tianjin, P.R. China
Honeywell Automation India Ltd. – Pune 411013 India
Viton® is a registered trademark of DuPont
FoundationTM Fieldbus is a trademark of the Fieldbus Foundation.
Teflon® is a registered trademark of DuPont.
HART® is a registered trademark of HART Communications Foundation.
DC® 200 is a registered trademark of Dow Corning.
Hastelloy® C-276 is a registered trademark of Haynes International.
FM ApprovalsSM is a service mark of FM Global
Monel® 400 is a registered trademark of Special Metals Corporation.


ST 3000 and Experion are registered trademarks of Honeywell International Inc.
16
ST 3000 Smart Pressure Transmitter
Mounting
Attention: Dotted area indicates use
with closed tank with reference leg.
Maximum Level
Variable
Head H1
Reference
Leg
Minimum Level
HP Side
mounted
to tank
LP Side vented
to atmosphere
STR3006
Figure 3—Typical mounting arrangement for flange mounted liquid level transmitter.
ST 3000 Smart Pressure Transmitter
Reference Dimensions
millimeters
inches
Figure 4—Approximate mounting dimensions for STF924 and STF932 flush diaphragm type.
17
18
ST 3000 Smart Pressure Transmitter
Reference Dimensions
Figure 5—Approximate mounting dimensions for STF924 and STF932 extended diaphragm type.
ST 3000 Smart Pressure Transmitter
Reference Dimensions
Figure 6—Approximate mounting dimensions for STF92F and STF93F pseudo flange type.
19
20
ST 3000 Smart Pressure Transmitter
Options

Mounting Bracket (Options MB, MX, SB, SX and FB)

The angle mounting bracket is available in either zinc-
This option provides software the meets the NAMUR
plated carbon steel or stainless steel and is suitable for
NE43 requirements for failsafe software. Transmitter
horizontal or vertical mounting on a two inch (50
failure information is generated when the measuring
millimeter) pipe, as well as wall mounting. An optional
information is no longer valid.
flat mounting bracket is also available in carbon steel
Transmitter failure values are: ≤ 3.6 mA and ≥ 21.0 mA.
for two inch (50 millimeter) pipe mounting.

The normal ST 3000 ranges are ≤ 3.8 mA and ≥ 20.5
Indicating Meter (Options ME and SM)
Two integral meter options are available. An analog
meter (option ME) is available with a 0 to 100% linear
mA.


configured to display pressure in pre-selected

electronics housing at no extra cost. Note that a
A terminal block is available with circuitry that protects
separate nameplate on the meter body contains the
the transmitter from transient surges induced by nearby
serial number and body-related data. A stainless steel
lightning strikes.
wired on tag with additional data of up to 4 lines of 28
characters is also available. The number of characters
HART® Protocol Compatibility (Options HC and H6)
HART Protocol compatibility in either HART 5.x or 6.x
for tagging includes spaces.

Transmitter Configuration (Options TC)
formats. Transmitters with a HART Option are
The factory can configure the transmitter linear/square
compatible with any HART enabled system that
root extraction, damping time, LRV, URV and mode
provides 5.x or 6.x format support.
(analog/digital) and enter an ID tag of up to eight char-
FoundationTM Fieldbus (Option FF)
acters and scratchpad information as specified.
Equips transmitter with FF protocol for use in 31.25

steel nameplate mounted on the transmitter’s
Lightning Protection (Option LP)
Optional electronics modules for the ST 3000 provide

Tagging (Option TG)
Up to 30 characters can be added on the stainless
engineering units.

Indicator Configuration (Option CI)
Provides custom configuration of Smart Meters.
scale. The Smart Meter (option SM) provides an LCD
display for both analog and digital output and can be
NAMUR NE43 Compliance (Option NE)

Custom Calibration and ID in Memory (Option CC)
kbit/s FF networks. See document 34-ST-03-72 for
The factory can calibrate any range within the scope of
additional information on ST 3000 Fieldbus
the transmitter’s range and enter an ID tag of up to
transmitters.
eight characters in the transmitter’s memory.
SIL2/SIL3 Certification (Option SL)
This ST 3000 product is available for use with safety
systems. With the SL option, we are fully certified to
SIL 2 capability for single transmitters and SIL 3
capability for multiple transmitter use through TÜV
Nord Sys Tec GmbH & Co. KG. We are in compliance
with the following SIL standards:
IEC 61508-1: 1998;
IEC 61508-2: 2000;
IEC 61508-3: 1998
ST 3000 Smart Pressure Transmitter
21
Ordering information
Sales and Service
For application assistance, current specifications, pricing, or name of the nearest Authorized Distributor, contact one of the offices below.
Asia Pacific Global
Technical Support
Field Instruments
Phone: +65 6580 3156
Fax: +65 6445-3033
Australia
Honeywell Limited
Phone: +(61) 7-3846 1255
FAX: +(61) 7-3840 6481
Toll Free 1300-36-39-36
Toll Free Fax:
1300-36-04-70
China – PRC - Beijing
Honeywell China Inc.
Phone: +(86-10) 84583280
Fax: +(86-10) 8458-4650
China – PRC - Shanghai
Honeywell China Inc.
Phone: (86-21) 5257-4568
Fax: (86-21) 6237-2826
China – PRC - Chengdu
Honeywell China Inc.
Phone: +(86-28) 66135078
Fax: +(86-28) 8678-7061
China – PRC - Xi’an
Honeywell China Ltd Xi’an.
Phone: +(86-29) 88337490
Fax: +(86-29) 8833-7489
China – PRC - ShenzhenHoneywell China Inc.
Phone: +(86) 755-25181226
Fax: +(86) 755-2518-1221
New Zealand
Honeywell Limited
Phone: +(64-9) 623-5050
Fax: +(64-9) 623-5060
Toll Free (0800) 202-088
Singapore
Honeywell Pte Ltd.
Phone: +(65) 6580 3278
Fax: +(65) 6445-3033
South Korea
Honeywell Korea Co Ltd
Phone: +(822) 799 6114
Fax: +(822) 792 9015
Thailand
Honeywell Systems
(Thailand) Ltd.
Phone: +(662) 693-3099
FAX: +(662) 693-3089
Taiwan R.O.C.
Honeywell Taiwan Ltd.
Phone: +(886-2) 22451000
FAX: +(886-2) 2245-3243
SE Asia Countries
see Honeywell Pte Ltd
(Singapore)
for: Philippines, Pakistan,
Cambodia, Guam, Laos,
Myanmar, Vietnam,
East Timor
SE Asia Countries
see Honeywell
Automation India Ltd for:
Bangladesh
Nepal
Sri Lanka
EUROPE
Indonesia
PT Honeywell Indonesia
Phone: +(62) 21-535-8833
FAX: +(62) 21-5367 1008
Austria
Honeywell Austria GmbH
Phone: +43 (316)400123
FAX: +43 (316)40017
Honeywell Automation
India Ltd.
Honeywell Ltd.
Phone:+(91) 6603-9400
Fax: +(91) 6603-9600
Belgium
Honeywell SA/NV
Phone:+32 (0)2728 24 07
FAX: +32 (0)2728 22 45
Denmark
Honeywell A/S
Phone: +(45) 39 55 55 55
FAX: +(45) 39 55 55 58
Spain
Honeywell S.A.
Phone: +34 (0)91313 61 00
FAX: +34 (0)91313 61 30
Finland
Honeywell OY
Phone: +358 (0)20752 2753
FAX: +358 (0) 20752 2751
Sweden
Honeywell AB
Phone: +(46) 8 775 55 00
FAX: +(46) 8 775 56 00
France
Honeywell SA
Phone: +33 (0)1 60198075
FAX: +33 (0)1 60198201
Switzerland
Honeywell AG
Phone: +41 18552448
FAX: +(41) 1 855 24 45
Germany
Honeywell AG
Phone: +49 (69)8064-299
FAX: +49 (69)806497336
Turkey
Honeywell Turkey A.S.
Phone: +90 216 578 71 00
FAX: +90 216 575 66 35
Hungary
Honeywell Kft.
Phone: +36-1-451 4300
FAX: +36-1-451 4343
Ukraine
Honeywell
Tel: +380-44-351-15-50
Fax: +380-44-351-15-51
Italy
Honeywell S.p.A.
Phone:+390292146307
FAX: +39 0292146377
United Kingdom
Honeywell Control Systems
Ltd.
Phone: +44 (0)1344 655251
FAX: +44 (0) 1344 655554
The Netherlands
Honeywell B.V.
Phone: +31 (0) 20 5656200
FAX: +31 (0) 20 5656210
Norway
Honeywell A/S
Phone: (45) 39 55 55 55
Poland
Honeywell Sp. zo.o
Phone: +48-22-6060900
FAX: +48-22-6060901
Portugal
Honeywell Portugal Lda
Phone: +351 21 424 5000
FAX: +351 21 424 50 99
Romania
Honeywell Bucharest
Phone: +40 (0) 21 2316437
FAX: +40 (0) 21 2316439
Japan
Honeywell Inc.
Phone: +(81) 3 6730 7197
Fax: +(81) 3 6730 7228
Bulgaria
Honeywell EOOD
Phone: +(359) 2 40 20
900
FAX: +(359) 2 40 20 990
Russian Federation (RF),
Honeywell Field Solutions
Kievskaya str., 7,
Moscow 121059, Russia
Phone +7 (495) 796 98 60
Fax
+7 (495) 797 99 64
Malaysia
Honeywell Engineering
Sdn Bhd
Phone: +(603) 7958-4788
Fax: +(603) 7958-8922
Czech Republic
Honeywell spol. s.r.o.
Phone:+420 242 442 232
FAX: +420 242 442 131
Slovak Republic
Honeywell s.r.o.
Phone: +421-2-58247 410
FAX: +421-2-58247 415
MIDDLE EAST
Abu Dhabi U A E
Middle East Headquarters
Honeywell Middle East Ltd.
Phone: +971 2 4041246
FAX: +971 2 4432536
Sultanate of Oman
Honeywell & Co Oman LLC
Phone: +968 24 701153/
Ext.33
FAX +968 24 787351
Saudia Arabia
Honeywell Turki Arabia Ltd
Jubail Office
Phone: +966-3-341-0140
Fax: +966-3-341-0216
Honeywell - ATCO
Dammam Office
Phone: 0096638304584
Fax: 0096638338059
Kuwait
Honeywell Kuwait KSC
Phone: +965 242 1327 to 30
Fax: +965 242 8315
And
Phone: +965 326
2934/1821Fax: +965 326
1714
AFRICA
Mediterranean & African
Distributors
Honeywell SpA
Phone: +39 (02) 250 10 604
FAX: +39 (02) 250 10 659
South Africa (Republic of)
and sub saharan
Honeywell Southern Africa
Honeywell S.A. Pty. Ltd.
Phone: +27 11 6958000
FAX +27 118051504
NORTH AMERICA
Canada
Honeywell LTD
Phone: 1-800-737-3360
FAX: 1-800-565-4130
USA
Honeywell Process
Solutions,
Phone: 1-800-423-9883
Or 1-800-343-0228
Email: [email protected]
SOUTH AMERICA
Argentina
Honeywell S.A.I.C.
Phone: +(54-11) 4383-3637
FAX: +(54-11) 4325-6470
Brazil
Honeywell do Brasil & Cia
Phone: +(55-11) 7266-1900
FAX: +(55-11) 7266-1905
Chile
Honeywell Chile, S.A.
Phone: +(56-2) 233-0688
FAX: +(56-2) 231-6679
Mexico
Honeywell S.A. de C.V.
Phone: +(52) 55 5259-1966
FAX: +(52) 55 5570-2985
Puerto Rico
Honeywell Inc.
Phone: +(809) 792-7075
FAX: +(809) 792-0053
Trinidad
Honeywell Inc.
Phone: +(868) 624-3964
FAX: +(868) 624-3969
Venezuela
Honeywell CA
Phone: +(58-2) 238-0211
FAX: +(58-2) 238-3391
22
ST 3000 Smart Pressure Transmitter
Model Selection Guides are subject to change and are inserted into the specifications as guidance only.
Prior to specifying or ordering a model check for the latest revision Model Selection Guides which are published at:
http://hpsweb.honeywell.com/Cultures/en-US/Products/Instrumentation/ProductModelSelectionGuides/default.htm
Model Selection Guide (34-ST-16-30)
34-ST-16U-30
Issue 46
Page 1 of 6
ST 3000 Smart Transmitter
Flange Mounted Liquid Level
Series 900
Model Selection Guide
Instructions
●
●
●
●
●
Select the desired Key Number. The arrow to the right marks the selection available.
Make one selection from each Table (I, II and IV), using the column below the proper arrow.
Select as many Table III options as desired plus a communications option selection.
A ( ) denotes unrestricted availability. A letter denotes restricted availability.
Restrictions follow Table IV.
Key Number
______
I
-
II
___
III (Optional)
_____
-
-
_ _, _ _, _ _
-
IV
XXXX
KEY NUMBER
Span
0-4 to 0-400 inH20 / 0-10 to 0-1000 mbar - Compound Characterized
0-1 to 0-100 psi / 0-0.07 to 0-7 bar - Compound Characterized
0-4 to 0-400 inH20 / 0-10 to 0-1,000 mbar
0-1 to 0-100 psi / 0-0.07 to 0-7 bar
Important Note:
Selection
STF924
STF932
STF92F
STF93F
Avail.
Base STF models no longer include a default communications option. All units now require the selection
of a communication option from Table III (AN, DE, HC, H6 or FF).
TABLE I - METER BODY
Design
Reference
Head
Vent/Drain
Valve on
Ref. Head
Carbon
1
Steel
316 SS
Flush
316 SS
5
3, 6
Materials
Fill Fluid (Meter
Body & Flange)
Process
Connection
1
2
3
6
3
2
Barrier
Diaphragm
(wetted)
Diaphragm
Plate
(wetted)
316L SS
3
Hast C
3
Hast C
316L SS
3
Hast C
3
Hast C
316L SS
316 SS
3
Hast C
316L SS
316L SS
3
Hast C
3
Hast C
316L SS
3
Hast C
Extended
316 SS
316L SS
5
316 SS
3
Hast C
Carbon
316L SS
1
3
Steel
Pseudo
Hast C
316 SS
Flange
316L SS
5
316 SS
3
Hast C
®
DC 200 Silicone
CTFE
Reference Head
Hast C
Carbon
1
Steel
Hast C
1/4 NPT
1/2 NPT (with Adapter)
Hast C
Extension
(wetted)
N/A
3
316L SS
316 SS
N/A
N/A
Flange
High Pressure Side
Low Pressure Side
High Pressure Side
Low Pressure Side
Sel.
A__
W__
B__
E__
X__
F__
●
●
●
●
●
●
J__
M__
N__
R__
S__
A__
B__
E__
F__
_1_
_2_
●
●
●
●
●
__A
__C
__H
__K
Carbon Steel heads are zinc-plated and not recommended for water service due to hydrogen migration. For that
service, use the 316 stainless steel Wetted Reference Head.
Vent/Drains are sealed with Teflon® or PTFE.
Hastelloy® C-276 or UNS N10276
Supplied as indicated or as Grade CW12MW, the casting equivalent of Hastelloy® C-276
●
●
●
●
●
●
●
●
●
●
●
t
t
t
ST 3000 Smart Pressure Transmitter
23
34-ST-16U-30
Issue 46
Page 2 of 6
Availability
STFxxx
No Selection
Carbon Steel
(non-wetted)
Carbon Steel
(non-wetted)
2" ANSI Class 150
_7___
●
2" ANSI Class 300
_8___
●
DN50-PN40 DIN
3" ANSI Class 150
3" ANSI Class 300
DN80-PN40 DIN
4" ANSI Class 150
4" ANSI Class 300
DN100-PN40 DIN
_9___
_A___
_B___
_C___
_D___
_E___
_F___
●
●
●
●
●
●
●
2" ANSI Class 150
_Q___
●
2" ANSI Class 300
_U___
●
DN50-PN40 DIN
3" ANSI Class 150
3" ANSI Class 300
DN80-PN40 DIN
4" ANSI Class 150
4" ANSI Class 300
DN100-PN40 DIN
_V___
_H___
_J___
_K___
_L___
_M___
_N___
●
●
●
●
●
●
●
2" ANSI Class 150
_W___
●
2" ANSI Class 300
_X___
_Y___
●
●
304 SS
(non-wetted)
316 SS
(non-wetted)
316L SS
(wetted)
304 SS
(non-wetted)
304 SS
(non-wetted)
Not applicable
No Selection
316L SS
Flush Design
Hastelloy® C-2763
Extended Design
No Selection
316L SS
Flush
Extension (wetted)
Diameter
1.87 Inches (for 2", 3" or 4 " spud)
No Selection
3
9
924 92F
932 93F
●
●
●
●
●
●
●
DN50-PN40 DIN
Pseudo Flange on
Standard DP
2" ANSI Class 150
without Vent/Drain
2" ANSI Class 150 with
Vent/Drain
3" ANSI Class 150 with
Vent/Drain
3" ANSI Class 150
without Vent/Drain
Gasket Ring (wetted)
Selection
0____
_1___
_2___
_3___
_4___
_5___
_6___
3" ANSI Class 150
3" ANSI Class 300
DN80-PN40 DIN
4" ANSI Class 150
4" ANSI Class 300
DN100-PN40 DIN
Flange
(ANSI Flanges have
125 - 500 AARH
Surface Finish)
None
Threaded Nut
Ring Material
None
Flange Material
TABLE II - FLANGE ASSEMBLY
No Selection
_S___
●
_T___
●
_R___
●
_P___
●
__0__
__1__
__2__
__5__
___0_
g
g
v
●
___F_
h
___C_
___D_
___E_
v
v
____0
●
●
Length
9
2 inches
4 inches
6 inches
v
Hastelloy® C-276 or UNS N10276
For part numbers and pricing information on Tank Spuds refer to page ST-95 (Supplementary Accessories & Kits).
●
24
ST 3000 Smart Pressure Transmitter
34-ST-16U-30
Issue 46
Page 3 of 6
TABLE III - OPTIONS
Communication Options (Must choose a communications option)
Analog only (can be configured using appropriate Honeywell DE tool)
DE Protocol communications
®
HART 5.x Protocol Compatible Electronics
®
HART 6.x Protocol Compatible Electronics
FOUNDATIONTM Fieldbus Communications
Indicating Meter Options
Analog Meter (0-100 Even 0-10 Square Root)
Smart Meter
Custom Configuration of Smart Meter
Local Zero
Local Zero and Span
Transmitter Housing & Electronics Options
No housing conduit plugs or adaptors come standard with the ST 3000.
For certain approval codes, you must select a certified conduit plug from below and
it will come packaged in the box with your transmitter.
5
316 SS Electronics Housing - (with M20 conduit connections)
5
316 SS Electronics Housing - (with M20 to 1/2 NPT 316 SS conduit adapter for use
with FM and CSA Approval codes)
1/2 NPT Male to M20 Female 316 SS Certified Conduit Adapter (ATEX, CSA & IECEx)
1/2 NPT Male to 3/4 NPT Female 316 SS Certified Conduit Adapter (ATEX, CSA &
IECEx)
M20 Male to 1/2 NPT Female 316 SS Certified Conduit Adaptor (ATEX, CSA & IECEx)
1/2 NPT Zinc-plated Certified Conduit Plug (ATEX, CSA & IECEx)
1/2 NPT 316 SS Certified Conduit Plug (ATEX, CSA & IECEx)
M20 316 SS Certified Conduit Plug (ATEX, CSA & IECEx)
1/2 NPT Non-certified Conduit plug (Zinc-plated carbon steel, general use)
NAMUR Failsafe Software
SIL 2 - TÜV Certified transmitter (requires HC or H6 and WP options)
Lightning Protection
Custom Calibration and I.D. in Memory
Transmitter Configuration - (non-Fieldbus)
Transmitter Configuration - (Fieldbus)
Write Protection (Delivered in the "enabled" position)
Write Protection (Delivered in the "disabled" position)
Stainless Steel Customer Wired-On Tag (4 lines, 26 characters per line, customer
supplied information )
Stainless Steel Customer Wired-On Tag (blank)
Meter Body Options (Carbon Steel standard)
NACE A286 SS Bolts
316 SS Bolts
B7M Bolts
5
316 SS Adapter Flange - 1/2 NPT with CS Bolts
5
316 SS Adapter Flange - 1/2 NPT with 316 SS Bolts
5
316 SS Adapter Flange - 1/2 NPT with NACE A286 SS Bolts
5
316 SS Adapter Flange - 1/2 NPT with B7M Bolts
®
3, 6
Hastelloy C-276
Adapter Flange - 1/2 NPT with CS Bolts
®
3, 6
Hastelloy C-276
Adapter Flange - 1/2 NPT with 316 SS Bolts
® 4, 7
Adapter Flange - 1/2 NPT with CS Bolts
Monel 400
® 4, 7
Monel 400
Adapter Flange - 1/2 NPT with 316 SS Bolts
5
316 SS Blind Adapter Flange with CS Bolts
5
316 SS Blind Adapter Flange with 316 SS Bolts
5
316 SS Blind Adapter Flange with NACE A286 SS Bolts
5
316 SS Blind Adapter Flange with B7M Bolts
316 SS Center Vent Drain and Bushing
®8
Viton Process Head Gaskets (adapter gaskets ordered separately)
®8
Viton Adapter Flange Gaskets
Services/Certificates/Marine Type Approval Options
User's Manual Paper Copy (Standard, HC/H6, or FF ships accordingly)
Clean Transmitter for Oxygen or Chlorine Service with Certificate (50039190)
Over-Pressure Leak Test with Certificate (F3392)
Calibration Test Report and Certificate of Conformance (F3399)
Certificate of Conformance (F3391)
Certificate of Origin (F0195)
SIL Certificate (SIL 2/3) (FC33337)
NACE Certificate (Process-Wetted & Non-Process Wetted) (FC33339)
NACE Certificate (Process-Wetted Only) (FC33338)
Material Traceability Certification per EN 10204 3.1 (FC33341)
Marine Type Approvals (DNV, ABS, BV, KR & LR) (FC33340)
Availability
STFxxx
Selection
AN
DE
HC
H6
FF
924 92F
932 93F
●
●
●
●
●
●
●
●
r
r
ME
SM
CI
LZ
ZS
m
x
s
m
x
s
SH
n
n
A3
i
i
A1
●
●
A2
●
●
A4
A5
A6
A7
A8
NE
SL
LP
CC
TC
FC
WP
WX
●
●
●
●
●
●
●
●
●
●
15
p
15
p
●
●
●
●
15
21
15
21
b
●
●
●
●
b
TG
●
●
TB
●
●
CR
SS
B7
S2
S3
S4
S5
T2
T3
V2
V3
B3
B4
B5
B6
CV
VT
VF
●
●
●
●
●
●
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
●
●
●
●
●
●
●
●
●
●
●
●
17
17
●
●
UM
0X
TP
F1
F3
F5
FE
F7
FG
FX
MT
b
j
j
●
●
●
●
●
●
●
●
22
o
o
22
o
o
●
●
●
●
Table III continued next page
3
4
5
6
7
8
Hastelloy® C-276 or UNS N10276
Monel 400® or UNS N04400
Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS.
Supplied as indicated or as Grade CW12MW, the casting equivalent of Hastelloy® C-276
Supplied as indicated or as Grade M30C, the casting equivalent of Monel 400®
Viton® or Fluorocarbon Elastomer
b
b
b
b
b
b
b
b
ST 3000 Smart Pressure Transmitter
25
34-ST-16U-30
Issue 46
Page 4 of 6
Availability
STFxxx
Selection
TABLE III - OPTIONS (continued)
Warranty Options
Additional Warranty - 1 year
Additional Warranty - 2 years
Additional Warranty - 3 years
Additional Warranty - 4 years
W1
W2
W3
W4
924 92F
932 93F
●
●
●
●
●
●
●
●
9X
●
●
1C
●
●
3S
●
●
b
TABLE III - OPTIONS (continued)
Approval
Body
Approval Type
ATEX10
(LCIE)
Selection
Location or Classification
No hazardous location approvals
Explosion Proof
FM
Dust-Ignitionproof
SM
Approvals
Non-Incendive
Intrinsically Safe
Class I, Div. 1, Groups A,B,C,D
Class II, III Div. 1, Groups E,F,G
Class I, Div. 2, Groups A,B,C,D
Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G
Intrinsically Safe,
Zone 0
Ex ia IIC
T4 (Ta = –50°C to +93°C);
T5 (Ta = –50°C to +85°C);
T6 (Ta = –50°C to +70°C)
Enclosure IP 66/67
Intrinsically Safe,
Zone 1
Ex ia IIC
T4 (Ta = –50°C to +93°C);
T5 (Ta = –50°C to +85°C);
T6 (Ta = –50°C to +70°C)
Enclosure IP 66/67
Dust-tight Enclosure,
Zone 0
Ex tD A20 IP6X
T95°C (at Ta = 93°C) or
T80°C (at Ta = 78°C)
Enclosure IP 66/67
Flameproof and Dusttight Enclosure,
Zone 1
Ex d IIC
T5 (Ta = –40°C to +93°C),
T6 (Ta = –40°C to +78°C)
Supply 11- 42Vdc
Ex tD A21 IP6X
T95°C (at Ta = 93°C) or
T80°C (at Ta = 78°C)
Enclosure IP 66/67
Non-Sparking,
Zone 2
Ex nA, IIC
T5 (Ta = –40°C to +93°C),
T6 (Ta = –40°C to +78°C);
Zone 2 Supply < 42Vdc, 23mA
Ex tD A22 IP6X
T95°C (at Ta = 93°C) or
T80°C (at Ta = 78°C)
(Honeywell).
Enclosure IP 66/67
Multiple Marking
11
Int. Safe, Zone 0/1 and
Dust-tight Enclosure,
or
Flameproof, Zone 1 and
Dust-tight Enclosure,
or
Non-Sparking, Zone 2
b
33
24
24
3N
●
●
3C
24
24
Ex ia IIC
T4 (Ta = –50°C to +93°C);
T5 (Ta = –50°C to +85°C);
T6 (Ta = –50°C to +70°C);
Ui = 30V; Ii = 100mA
Ex tD A20 IP6X
T95°C (at Ta = 93°C) or
T80°C (at Ta = 78°C)
Ex d IIC
T5 (Ta = –40°C to +93°C),
T6 (Ta = –40°C to +78°C)
Supply 11- 42Vdc
Ex tD A21 IP6X
T95°C (at Ta = 93°C) or
T80°C (at Ta = 78°C)
Ex nA, IIC
T5 (Ta = –40°C to +93°C),
T6 (Ta = –40°C to +78°C);
Zone 2 Supply < 42Vdc, 23mA
Ex tD A22 IP6X
T95°C (at Ta = 93°C) or
T80°C (at Ta = 78°C)
(Honeywell)
Enclosure IP 66/67
Table III Approvals continued next page
26
ST 3000 Smart Pressure Transmitter
34-ST-16U-30
Issue 46
Page 5 of 6
STFxxx
TABLE III - OPTIONS (continued)
Approval
Body
Approval Type
Canadian Explosion Proof
Standards
Dust-Ignitionproof
Association
Intrinsically Safe
(CSA)
Flameproof,
Zone 1
IECEx
Intrinsically Safe,
Zone 0/1
Intrinsically Safe,
Zone 0/1
SAEx
Flameproof, Zone 1
(South Africa) Multiple Marking 11
CERTUSP
INMETRO
(Brazil)
2F
32
3F
2J
24
24
CA
24
24
Z2
●
●
ZD
●
●
ZA
●
●
6D
●
●
6S
●
●
●
●
Class I, Div. 1, Groups B,C,D
Class II, III, Div. 1, Groups E,F,G
Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G
Ex d IIC
T5 (Ta = -40 to +93ºC),
T6 (Ta = -40 to +78ºC)
Ex ia IIC; T3, T4, T5 , T6
See Spec for detailed temperature codes by
Communications option
Ex ia IIC T4, T5, T6
Ex d IIC T5, T6
Int. Safe, Zone 0/1, or Ex ia IIC T4, T5, T6
Flameproof, Zone 1 Ex d IIC T5, T6
Flameproof, Zone 1
BR- Ex d IIC T5, T6
Intrinsically Safe,
Zone 0/1
24
Selection
Location or Classification
Enclosure IP 66/67
Enclosure IP 66/67
BR- Ex ia IIC; T4, T5, T6
(See CERTUSP certificate for detailed temperature
codes by Communications option)
10
See ATEX installation requirements in the ST 3000 User's Manual
The user must determine the type of protection required for installation of the equipment. The user shall then check
the box [√] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection
has been checked on the nameplate, subsequently the equipment shall not be reinstalled using any of the other
certification types.
11
Selection
XXXX
TABLE IV
Factory Identification
RESTRICTIONS
Restriction
Letter
b
c
g
Table
I
I
h
i
j
m
n
III
I
III
o
III
p
III
r
III
s
t
v
x
15
17
21
22
III
III
III
24
III
I
III
Available Only With
Not Available With
Selection
Table
Selection
Select only one option from this group
_ _ H, _ _ K
A _ _, B _ _, E _ _, F _ _, J _ _,
W _ _, X _ _
I
M _ _,N _ _,R _ _,S _ _
II
_ _ 5, _ _, _ _ 0 _ _
1C or 2J
_2_
SM
III
1C, 2J
S2, S3, S5, T2, T3, B3, B4, B6,
III
CR
V2, V3
FF
HC or H6 and WP
III
FISCO/FNICO compliance available
only with 1C
III
TC, ME or FISCO/FNICO compliance not
available with 3C, 3N, 33, 3S, 2J, CA, Z2,
ZD, ZA, 6D & 6S
III
FF, ME
III
FF
Select S2, S3, S4, S5, T2, T3, V2, V3
M _ _, N _ _, R _ _, S _ _
FF, SM
VT
FF
SL
This approval code requires the
selection of a certified conduit plug: A5,
A6 or A7
Ordering Example: STF924-A1A-01000-HC,1C+XXXX
b
ST 3000 Smart Pressure Transmitter
34-ST-16U-30
Issue 46
Page 6 of 6
Hastelloy® is a registered trademark of Haynes International
Monel 400® is a registered trademark of Special Metals Corporation.
DC® 200 is a registered trademark of Dow Corning
HART® is a registered trademark of HART Communication Foundation.
FOUNDATIONTM Fieldbus is a registered trademark of Fieldbus Foundation.
Viton® is a registered trademark of DuPont Performance Elastomers.
Teflon® is a registered trademark of DuPont.
FM ApprovalsSM is a service mark of FM Global
27
28
ST 3000 Smart Pressure Transmitter
Specifications are subject to change without notice.
For More Information
Learn more about how ST 3000 Series 900 Flangemount Pressure Transmitters can increase
performance, reduce downtime and decrease
configuration costs, visit our website
www.honeywell.com/ps or contact
your Honeywell account manager.
Honeywell Process Solutions
1860 West Rose Garden Lane
Phoenix, AZ 85027
Tel: 1-800-423-9883 or 1-800-343-0228
www.honeywell.com/ps
34-ST-03-68
August 2011
© 2011 Honeywell International Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement