A12B – 6U VMEbus MPC8245 CPU Board (M
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
A12B – 6U VMEbus MPC8245 CPU Board
(M-Modules™)
n PowerPC® MPC8245 / 300 MHz
n VMEbus master and slave
n 256 MB DRAM, CompactFlash®
n Dual 10/100-Mbit Fast Ethernet
n 4 COMs, USB, IDE, keyboard/mouse
n 3 M-Module™ slots
n MENMON™ BIOS for PowerPC® cards
The A12B is a single-board computer for embedded
applications based on the PowerPC® MPC 8245. It can
be used as a master or slave in a VMEbus environment
or as a stand-alone card. The A12 provides up to 1MB
local dual-ported SRAM for slave access and
communication between the local CPU and another
VMEbus master.
The CPU card comes with the MPC8245 PowerPC®
with 300MHz clock frequency and a local 32-bit/33MHz PCI data bus. It is a complete state-of-the-art SBC
offering DRAM, Flash and CompactFlash® memory,
dual Fast Ethernet, 4 COMs, USB, IDE and keyboard/
mouse interfaces as well as an optional onboard hard
disk. A software-loadable FPGA is available for
A12B Data Sheet / 2013-02-06
individual user-defined functions such as additional UARTs, a CAN bus
interface, DSP functions etc.
In addition, the A12B CPU board can be equipped with M-Module™
mezzanine cards. M-Modules™ are recommended for real-world I/O like
analog/binary process I/O and instrumentation I/O. The modular
combination of I/O functionality on a single-board computer allows to
build up tailored control systems which appear as customized solutions
based on standard components.
The A12 comes with MENMON™ support. This firmware/BIOS can be
used for bootstrapping operating systems (from disk, flash or network),
for hardware testing, or for debugging applications without running any
operating system.
The A12 single-board computer is partly compatible with the
MVME2100 board by Motorola.
Page 1
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
Diagram
A12B Data Sheet / 2013-02-06
Page 2
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
Technical Data
CPU
n
PowerPC®
o MPC8245
o 300 MHz
o Double precision FPU
Memory
n
L1 Cache integrated in MPC8245
Up to 512 MB SDRAM system memory
o One 144-pin SO-DIMM slot for SDRAM modules
o 100 MHz memory bus frequency
2 MB Flash
Serial EEPROM 2 KB for factory settings
CompactFlash® card interface
o Via onboard IDE
o Type I
o True IDE
n
n
n
n
Mass Storage
n
Parallel IDE (PATA)
®
o One port for local CompactFlash
o One port for local hard-disk drive
o Drive can be connected via ribbon cable or mounted directly on the CPU board using MEN adapter kit
o Only one VMEbus slot needed even with hard disk
I/O
n
USB
o One USB 1.1 port
o Available via I/O connector
o External PHY
o Data rates up to 12 Mbit/s
Ethernet
o Two 10/100Base-T Ethernet channels
o RJ45 connector at front panel with two LEDs
One RS232 UART (COM1)
o RJ45 connector at front panel
o 16-byte transmit/receive buffer
o Handshake lines: CTS, RTS; DCD, DSR, DTR
One UART (COM2)
o Accessible via I/O connector
o Physical interface using SA-Adapter™ via 10-pin ribbon cable on I/O connector
o RS232..RS485, isolated or not: for free use in system (e.g., cable to front)
o 16-byte transmit/receive buffer
o Handshake lines: CTS, RTS; DCD, DSR, DTR; RI
Two UARTs (COM3/COM4)
o Accessible via I/O connector
o Physical interface using SA-Adapter™ via 10-pin ribbon cable on I/O connector
o RS232..RS485, isolated or not: for free use in system (e.g., cable to front)
o Handshake lines: none
PS/2 keyboard/mouse
o Accessible via I/O connector
o Requires external PHY
n
n
n
n
n
Mezzanine Slots
n
Three M-Module™ slots
o Compliant with M-Module™ standard
o Characteristics: D16, D32, A08, A24, INTA, INTC
Miscellaneous
n
Serial real-time clock with integrated 56-byte NVRAM
Serial hardware watchdog in supervisory circuit
Temperature sensor
User LEDs (external)
Hex switch for user settings
n
n
n
n
A12B Data Sheet / 2013-02-06
Page 3
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
Technical Data
Local PCI Bus
n
n
VMEbus
n
n
n
n
n
n
n
n
n
Electrical Specifications
n
n
Mechanical Specifications
n
n
Environmental Specifications
32-bit/33-MHz, 3.3V V(I/O)
Compliant with PCI Specification 2.2
Slot-1 function with auto-detection
Master
o D08(EO):D16:A24:A16
o Transfer rate max. 7 MB/s
Slave
o D08(EO):D16:A24:BLT
o Transfer rate max. 15 MB/s
Up to 1 MB shared fast SRAM
Interrupter D08(O):I(7-1):ROAK
Interrupt handler D08(O):IH(7-1)
Single level 3 fair requester
Single level 3 arbiter
Bus timer
Supply voltage/power consumption:
o +5 V (-3%/+5%), 1.65 A typ.
o ±12 V (-5%/+5%), only used for mezzanines, tbd.
MTBF: 63 000 h @ 50°C (derived from MIL-HDBK-217F)
Dimensions: standard double Eurocard, 233.3 mm x 160 mm
Weight (without mezzanines and accessories): 273 g
n
Temperature range (operation):
o 0..+60°C or -40..+85°C (screened)
o Airflow: min. 10 m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +3000 m
Shock: 15 g, 11 ms
Bump: 10 g, 16 ms
Vibration (sinusoidal): 2 g, 10..150 Hz
Conformal coating on request
Safety
n
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
n
Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
BIOS
n
MENMON™
Software Support
n
Linux
VxWorks®
QNX®
OS-9®
For more information on supported operating system versions and drivers see Downloads.
n
n
n
n
n
n
n
n
n
n
n
n
A12B Data Sheet / 2013-02-06
Page 4
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
Configuration & Options
Standard Configurations
Article No.
CPU Type
Clock
System RAM
CFlash
Boot Flash
Mezzanine
Slots
Operating
Temperature
01A012B00
MPC8245
300 MHz
256 MB
0 MB
2 MB
3 M-Modules
0..+60°C
Options
CPU
n
MPC8245, 300 MHz
Memory
n
System RAM
o 64 MB, 128 MB, 256 MB or 512 MB
CompactFlash®
o 0 MB up to maximum available
Boot Flash
o 2 MB
n
n
SA-Adapters™
n
n
Operating Temperature
n
n
Up to three SA-Adapters™ for UART functions (COM2..COM4)
RS232, RS422, RS485
0..+60°C
-40..+85°C
Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.
A12B Data Sheet / 2013-02-06
Page 5
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
Ordering Information
Standard A12B Models
01A012B00
MPC8245, 300MHz, 256 MB SDRAM, 2MB Flash, 3 M-Module™ slots, 0..+60°C
Related Hardware
01A021B00
A21B, Freescale™ QorIQ™ single-core P1013, 800 MHz, 1 GB DDR3 ECC SDRAM, 32
MB Flash, 3 M-Module™ slots, -40 to +85°C screened
Memory
0751-0042
CompactFlash® card, 4 GB, Type I, fixed bit set, -40..+85°C
0751-0055
CompactFlash® card, 8 GB, Type I, fixed bit set, -40..+85°C
0751-0058
CompactFlash® card, 16 GB, Type I, fixed bit set, -40..+85°C
0751-0061
CompactFlash® card, 2 GB, Type I, fixed bit set, -40 to +85°C
SA-Adapters™
You can find a more detailed overview of possible carrier board/SA-Adapter™ combinations along with
software support in our option matrix (PDF).
08SA01-00
RS232, not optically isolated, 0..+60°C
08SA02-00
RS422/485, half duplex, optically isolated, 0..+60°C
08SA02-01
RS422/485, full duplex, optically isolated, 0..+60°C
08SA02-07
RS422/485, full duplex, optically isolated, -40..+85°C screened
08SA03-00
1 RS232, optically isolated, 0..+60°C
08SA03-01
1 RS232, optically isolated, -40..+85°C screened
Systems & Card Cages
MEN delivers turn-key systems completely installed (hardware, operating system, accessories), wired and
tested. Different rack sizes, power supplies and backplanes on request.
For details please contact your local sales representative.
Miscellaneous Accessories
05AD67-00
IDE mounting kit 44-pin to 44-pin; 50.8 mm; installation kit for Kahlua Box or A12, A15,
D3 with AD67, temperature range: -40..+85°C
05A012-00
Mounting kit for 2.5" hard disk (9.5mm adapter) for A12, D3, SC13
05A012-01
Mounting kit for 2 SA adapters for A12/A15/D3, incl. 6U 1-slot VME or CompactPCI®
front panel incl. ribbon cable, without SA adapters
05F006-00
RS232 interface cable RJ45 to 9-pin D-Sub (1 COM to 1 COM), 2m
05M000-17
25 mounting screw sets to fix M-Modules™ on carrier boards
0710-0037
PATA hard disk drive 2.5", 24/7, 80GB, 4200rpm, -15..+70°C
08AD67-01
I/O extension 19" 6U 4HP incl. 1 USB connector, 1 keyboard connector, 1 mouse
connector; prepared for 3 SA adapters, prepared for HDD 2.5", reset, abort, 0..+60°C
Software: Linux
This product is designed to work under Linux. See below for potentially available separate software packages
from MEN.
This product is designed to work under ELinOS Embedded Linux by SYSGO. For more information and
product support please contact www.sysgo.com.
13Z014-90
Software: VxWorks®
This product is designed to work under VxWorks®. For details regarding supported/unsupported board
functions please refer to the corresponding software data sheets.
10F001N60
A12B Data Sheet / 2013-02-06
Linux device driver (MEN) for PCI-to-VME bridge on A12, A13, A14, A15, A17, A19, A20,
A21B/A21C and B11
VxWorks® BSP (MEN) for A15, F1N, B11, A12, D3, SC13 and Kahlua Box
Page 6
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
Ordering Information
Software: QNX®
This product is designed to work under QNX®. For details regarding supported/unsupported board functions
please refer to the corresponding software data sheets.
10F001N40
Software: OS-9®
Software: Firmware/BIOS
This product is designed to work under OS-9®. For details regarding supported/unsupported board functions
please refer to the corresponding software data sheets.
10F001N01
OS-9®(000) V.2.2/3.x BSP (object code, MEN) for F1N, B11, A12, D3, SC13 and Kahlua
Box
10F001N02
OS-9®(000) V4.2 BSP (object code, MEN) for F1N, B11, A12, A15, D3, SC13 and Kahlua
Box
MENMON™ is MEN's firmware/BIOS for PowerPC® platforms.
14A012-00
Software: Miscellaneous
QNX® BSP (MEN) for F1N, B11, A12, A15, D3, SC13 and Kahlua Box
MENMON™ (Firmware) for A12, D3 and SC13 (object code)
XiBase9, a graphical user interface for Linux and OS-9® from XiSys, is running on the MEN graphics controller
PC-MIP® and PMC modules P1, P17 and P517 in combination with the PowerPC®-based single-board
computers A11, A12, D3, F1N, B11 and SC13 (further SBCs on request). For more information, purchase and
support please go to www.xisys.de.
For operating systems not mentioned here contact MEN sales.
Documentation
A12B Data Sheet / 2013-02-06
Compare Chart 6U VMEbus CPU and I/O cards » Download
20AD67-00
AD67 User Manual
20A012-00
A12 User Manual
21MENM-00
MENMON™ User Manual
Page 7
Embedded Solutions
for Transportation and Industrial Markets
www.men.de/products/01A012B.html
Contact Information
Germany
France
USA
MEN Mikro Elektronik GmbH
Neuwieder Straße 3-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
MEN Mikro Elektronik SA
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
MEN Micro Inc.
860 Penllyn Blue Bell Pike
Blue Bell, PA 19422
Phone (215) 542-9575
Fax (215) 542-9577
[email protected]
www.men.de
[email protected]
www.men-france.fr
[email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are
trademarks or registered trademarks of their respective holders.
MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication.
MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything,
done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication.
The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.The
correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product
for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use MEN products for any unintended or unauthorized
application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that MEN was negligent regarding the design or manufacture of the part.
In no case is MEN liable for the correct function of the technical installation where MEN products are a part of.
Copyright © 2014 MEN Mikro Elektronik GmbH. All rights reserved.
A12B Data Sheet / 2013-02-06
Page 8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement