Test Tools Catalog
Test Tools Catalog
Volume 41, 2011
Keeping your world
up and running.
What’s new
Fluke 381 Remote Display
Clamp Meter with iFlex™
Part of Fluke’s new family of clamp meters,
the Fluke 381 Clamp Meter combines iFlex
flexibility with remote reading capability—the
best of both worlds.
• Remote display reads measurements
up to 30 feet away
• Measure up to 2500 A ac with the iFlex flexible
current probe
• 1000 A ac and dc current measurement
with fixed jaw
• 1000 V ac and dc voltage measurement
• Min/Max/Avg and inrush recording
• CAT IV 600 V, CAT III 1000 V
Remote
display
and iFlex
For information on the new 381 Remote Display
Clamp Meter with iFlex™ see page 4.
Fluke 810 Vibration Tester
Powerful
vibration
testing
The Fluke 810 Vibration Tester is the most
advanced troubleshooting tool for mechanical
maintenance teams who need an answer now.
• Utilizes a simple step-by-step process to
report on machine faults, without needing
prior measurement history
• On-board identification and location of
most common mechanical faults: bearings,
misalignment, unbalance, looseness
• 2 GB expandable on-board memory
• Four-level fault severity scale
• Tri-axial accelerometer reduces measurement
time by 2/3 over single axis accelerometers
For information on the new 810 Vibration Tester
see page 52.
1555 Insulation Resistance Tester
Ranges
up to
10 kV
From motors and generators to cables and
switchgear, Fluke now takes you all the way
to 10 kV.
• Ideal for testing a wide range of high voltage
equipment
• Automatic calculation of Dielectric Absorption
(DAR) and Polarization Index (PI) with no
additional setup
• Long battery life allows for over 750 tests
between charges
• Measurements can be stored in up to 99
memory locations, with each location assigned
a unique, user defined label for easy recall
For information on the new 1555 Insulation Resistance
Tester see page 25.
TiS Building Diagnostic
Thermal Imaging Scanner
Finally! An entry level thermal imager for quick,
easy and accurate problem identification and
troubleshooting, designed specifically for the
building inspection professional.
• Most affordable thermal imager on the market
that meets proposed RESNET infrared inspection
standard
• 120 x 120 resolution
• Large, 3.7 inch display–30 percent larger than
comparable imagers
• Rugged body withstands 2 m (6.5 ft) drop test
• Award winning ergonomic design
For information on the new TiS Thermal Imager
see page 47.
Display
30 %
larger
2AC VoltAlert™ Voltage Tester
Battery
check
button
2AC is the latest addition to the VoltAlert™ ac noncontact voltage tester family from Fluke, and is designed
to be pocket-sized and easy to use. The 2AC tests for
energized circuits and defective grounds. The tip of the
pocket-sized tester will glow red if voltage is present.
• Voltage detection from 90 V ac to 1000 V ac
• Always on, using special low power circuitry
to sustain battery life and ensure your 2AC
is always ready
• Innovative ‘Battery Check’ button function ensures
battery is in good condition
• CAT IV 1000 V overvoltage rated product
for best in class user protection
For information on the new 2AC VoltAlert see page 21.
190 Series II ScopeMeter ®
Portable Oscilloscopes
Multiply your diagnostic powers with the first
CAT III 1000 V/CAT IV 600 V rated, four-channel
portable scope on the market. The new Fluke 190
Series II brings an unprecedented combination of
performance and ruggedness into the field.
• Fast sample rate: up to 2.5 GS/s with up to
400 ps resolution
• Deep memory: 10,000 point per trace
waveform capture
• Single shot, pulse width and video triggering
• Seven-hour, high-performance Li-ion battery is
standard
• Two isolated USB ports for memory devices and
PC connectivity
For information on the new 190 Series II ScopeMeter
see page 42.
4
channel
testing
Test Tools Catalog
Volume 41, 2011
Contents
Fluke Corporation is the world
leader in compact, professional
electronic test tools.
From industrial
maintenance
to commercial
building operations,
Fluke tools deliver
the testing and
troubleshooting
capabilities to keep
global commerce
and industry up
and running.
Fluke customers
are technicians,
engineers,
electricians, and
building diagnostics
professionals—
people who stake
their reputations on
their tools.
4
8
Clamp
Meters
Digital
Multimeters
18
19
21
Distance
Meters
Earth Ground
Testers
Electrical
Testers
22
24
26
Indoor Air
Quality Tools
Insulation
Resistance Testers
Power Quality
Analyzers
31
40
44
Process
Calibration Tools
ScopeMeter®
Thermal
Imaging Tools
Test Tools
49
51
52
53
Thermometers
IR-Windows
Vibration Tester
Accessories
www.fluke.com
3
Fluke 381 Remote Display True-rms
AC/DC Clamp Meter with iFlex
x™
All the bells and whistles
The Fluke 381 Clamp Meter combines
iFlex flexibility with remote reading
capability for the ultimate in innovation and safety.
• Remote display reads measurements
up to 30 feet away
• iFlex flexible current probe
included, 18-inch circumference
• 2500 A ac current measurement
with iFlex
• 1000 A ac and dc curret measurement with fixed jaw
• 1000 V ac and dc voltage
measurement
• Frequency measurement to 500 Hz
• 60 kΩ resistance measurement
• Min/Max/Avg and inrush recording
• CAT IV 600 V, CAT III 1000 V
• Three-year warranty
See specifications chart on page 7.
Mobile resources
Fluke clamp meters are going mobile.
Visit m.fluke.com from any
smartphone for
on-the-go tips,
videos and info
regarding our
newest clamp
meters.
Join the conversation!
We’ve created
interactive messaging boards dedicated
to discussing all
things clamp meter.
Give us a shout,
start a discussion or
participate in a poll—
we’re eager to hear
your thoughts. Visit
www.fluke.com/
readyforanything
True
RMS
Fluke 365 Detachable Jaw
True-rms AC/DC Clamp Meter
Where rugged meets reliable
The Fluke 365 Clamp Meter offers a small,
detachable jaw—with four feet of coil—that
makes it easy to take and read measurements in
tight or hard-to-reach places.
• 200 A ac and dc current measurement
• 600 V ac and dc voltage measurement
• 6000 Ω resistance measurement
• Built-in flashlight
• Large, easy-to-read backlight display
• Three-year warranty
3D virtual
demos
Want to see the
Fluke 376 and
Fluke 381 Clamp
Meters up close
and personal? Visit www.fluke.com/
clampfamily for links to two 3D
virtual demos.
Recommended accessories
See specifications chart on page 7.
TL223
TL71
SureGrip™ Electrical
Test Lead Set
See page 57
Premium
Test Lead Set
See page 57
True
RMS
Ordering information
Included accessories
Models
18-inch iFlex™ Flexible Current
Probe, test leads, soft carrying
case, instruction card, safety
information sheet, five AA
alkaline batteries.
FLUKE-381
Test leads, soft carrying
case, instruction card, safety
information sheet, five AA
alkaline batteries.
FLUKE-365
Remote Display True-rms AC/DC Clamp Meter with iFlex™
i2500-10
i2500-18
10 inch iFlex™ Flexible
Current Probe
See page 5
18 inch iFlex™ Flexible
Current Probe
See page 5
Detachable Jaw True-rms AC/DC Clamp Meter
Check price and availability at
www.fluke.com/wtb-clamps
4
Clamp Meters
For more information, go to www.fluke.com/clamps
Fluke 370 Series Clamp Meters
Be ready for anything
Our new family of true-rms clamp meters
provides a range of state of-the-art feaures to meet even the most demanding
ob requirements.
All four of the new clamp meters have
mproved base features such as a large,
backlit display, true-rms standard, CAT IV
afety rating and a durably constructed
body. Additionally, the 376, 375 and 374
are compatible with the iFlex flexible
urrent probe (included with the 376,
old separately for the 375 and 374), and
provide increased measurement readings
o 1000 A and 1000 V ac and dc.
iFlex™ Flexible Current Probe
See specifications chart on page 7 for
details per model.
ke
uke 373
Unprecedented
measurement flexibility.
The new iFlex flexible current probe
expands the measurement range of
select Fluke clamp meters to 2500 A
ac while providing increased display
flexibility, improved wire access and
the ability to measure awkward-sized
conductors.
Available in 18-inch and 10-inch
coil sizes. Visit www.fluke.com/
iFlex-18 for additional specs.
True
RMS
Quick reference guide conversion table
Old model
New model
Fluke 337
Fluke 376
Fluke 336
Fluke 375
Fluke 374
Fluke 335
Fluke 334
Fluke 333
Fluke 374
Feature changes
Includes all 337 features plus:
• CAT IV 600 V, CAT III 1000 V
• iFlex 2500 A ac
• 1000 V ac/dc
• mV dc
• 60 kΩ
• 1000 µF
Includes all 336 features plus:
• CAT IV 600 V, CAT III 1000 V
• Optional iFlex 2500 A ac
• mV dc
• 60 kΩ
• 1000 µF
• Min/Max/Avg
Includes all 336 features (except low pass filter) plus:
• CAT IV 600 V, CAT III 1000 V
• 1000 µF
• Optional iFlex 2500 A ac
• Min/Max/Avg
Includes all 335 features plus:
• CAT IV 600 V, CAT III 1000 V
• Optional iFlex 2500 A ac
• Min/Max/Avg
• 600 A ac/dc
• 1000 µF
Fluke 373
Includes all 335 features (except inrush) plus:
• CAT IV 300 V, CAT III 600 V
• 1000 µF
Fluke 374
Includes all 334 features plus:
• CAT IV 600 V, CAT III 1000 V
• Optional iFlex 2500 A ac
• True-rms
• 600 A ac/dc
Fluke 373
Includes all 334 features (except inrush) plus:
• CAT IV 300 V, CAT III 600 V
• True-rms
Fluke 373
Includes all 333 features plus:
• CAT IV 300 V, CAT III 600 V
• True-rms
• 600 A ac
• 6000 Ω
Ordering information
Included accessories
Models
18-inch iFlex™ flexible current
probe, test leads, soft carrying
case, instruction card, safety
information sheet, two AA
alkaline batteries.
FLUKE-376
True-rms AC/DC Clamp Meter with iFlex™
Test leads, soft carrying
case, instruction card, safety
information sheet, two AA
alkaline batteries.
FLUKE-375
True-rms AC/DC Clamp Meter
Test leads, soft carrying
case, instruction card, safety
information sheet, two AA
alkaline batteries.
FLUKE-374
True-rms AC/DC Clamp Meter
Test leads, soft carrying
case, instruction card, safety
information sheet, two AA
alkaline batteries.
FLUKE-373
True-rms AC Clamp Meter
For more information, go to www.fluke.com/clamps
Recommended accessories
TL223
TL71
SureGrip™ Electrical
Test Lead Set
See page 57
Premium
Test Lead Set
See page 57
• 1000 µF
• Min/Max/Avg
• 1000 µF
• 1000 µF
i2500-10
i2500 18
10 inch iFlex™ Flexible
Current Probe
See page 5
18 inch iFlex™ Flexible
Current Probe
See page 5
AC285
TL175
SureGrip™ Alligator
Clips
See page 57
TwistGuard™
Test Leads
See page 57
Check price and availability at
www.fluke.com/wtb-clamps
Clamp Meters
5
Fluke 320 Series
Clamp Meters
Get more done
The Fluke 321 and 322 are designed
to verify the presence of load current,
ac voltage and continuity of circuits,
switches, fuses and contacts. These
small and rugged clamp meters are ideally suited for current measurements up
to 400 A in tight cable environments.
• Precised measurements with 1.8 %
basic accuracy
• Resolution up to 0.01 A and 0.1 V
• Measures ac current 40.00 A/400.0 A
• Measures ac and dc volts to 600 V
• Resistance measurement to 400 Ω
• Continuity for quick checking of shorts
See specifications chart on page 7 for
details per model.
Fluke 322
Fluke 321
Fluke 902 True-rms HVAC
Clamp Meter
Application note
DMM vs. Clamp Meter
What you know about digital
multimeters
and clamp
meters can
make a big
difference to
your bottom
line. How
well you
equip yourself to do
your work
plays a big
role in your
success.
When it
comes to electrical test equipment, are
you sure you have the right tools for
the job? Determine the answer to that
question by assessing your measuring needs, and learning a few things
about DMMs and clamp meters—read
the DMM vs. Clamp Meter application
note today.
Download this application note at
www.fluke.com/DMMvsClamp
Recommended accessories
Just for our HVAC pros
HVAC (heating, ventilation, air conditioning) technicians
require a service tool that can consistently keep up with
their demands. The Fluke 902 expands the existing line of
quality Fluke clamp meters by delivering the features necessary to diagnose and repair HVAC systems. Combined with
true-rms technology and a CAT III 600 V rating, the Fluke
902 helps technicians do their jobs safely and accurately.
• Designed for HVAC applications with capacitance, dc
current (µA), and temperature measurements
• Small body and jaws fit perfectly in your hand and into
tight places
• Handy “Display Hold” button keeps measurements on the
display
• Meter controls are positioned so current measurements can
be done with one hand (index finger on clamp opening
lever and thumb on rotary switch)
• Three-year warranty
TL223
TL71
SureGrip™ Electrical
Test Lead Set
See page 53
Premium
Test Lead Set
See page 54
LVD2
H3
Volt Light
See page 56
Clamp Meter Holster
See page 62
See specifications chart on page 7.
True
RMS
Ordering information
6
Included accessories
Models
Test leads, soft carrying case, instruction card, safety
information sheet, two AA alkaline batteries.
FLUKE-321
FLUKE-322
Clamp Meter
Clamp Meter
Test leads, temperature probe, soft carrying case, users
manual, two AA alkaline batteries.
FLUKE-902
True-rms HVAC Clamp Meter
Soft carrying case, instruction card, safety information
sheet, five AA alkaline batteries.
FLUKE-353
AC/DC True-rms Clamp Meter, 2000 A,
amps only
1.5 m silicone rubber test leads, test probes, alligator
clips, soft carrying case, six AA batteries, users manual.
FLUKE-355
AC/DC True-rms Clamp Meter, 2000 A
Clamp Meters
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/clamps
Fluke 353/355 AC/DC True-rms
Clamp Meters, 2000 A
Versatile, professional, accurate
Application note
Confidently take reliable readings with the true-rms Fluke
355 and 353 clamp meters—the tools of choice for high current clamp-on amp meter measurement up to 2000 A.
• Reliably handle a wide range of high-current applications
with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
• Large 58 mm (2.3 in) jaw
• In-rush current measurement
• High voltage measurement of 1000 V ac + dc true-rms,
600 V ac, and 1000 V dc (355 only)
• Resistance to 400 KΩ (355 only)
• Continuity beeper (355 only)
• Frequency measurement to 1 KHz
• Selectable low pass filter mode
• Min/Max/Avg
• Large display with backlight
Clamp Meter ABCs
What is a
clamp meter
and what
can it do?
What measurements
can be made
with a clamp
meter? How
do you get
the most out
of a clamp
meter?
Which clamp
meter is best suited to the environment
the meter will be used in? The answers
to these questions can be found in this
application note.
Ordering information on page 6.
True
RMS
Download this application note at
www.fluke.com/ClampABCs
Specifications – Clamp meters
Residential/commercial
electrical
General purpose
Industrial electrical
HVAC/R
High end industrial,
utility
iFlex
accessory
Leakage
360
•
321
322
365
373
374
375
376
381
902
353
355
i2500-10/
i2500-18
AC current
•
•
•
•
•
•
•
•
•
•
•
•
AC voltage
•
•
•
•
•
•
•
•
•
•
Resistance
•
•
•
•
•
•
•
•
•
•
Continuity
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DC volts
DC current
•
True-rms
•
•
Frequency
•
•
AC + DC voltage
AC + DC current
•
Min/Max/Avg
•
•
•
•
•
•
•
•
•
•
•
Temperature
•
Capacitance
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Special features
Inrush current mode
Low pass filter
18-inch iFlex Flexible
Current Probe
Optional
Optional
Included
Included
10-inch iFlex Flexible
Current Probe
Optional
Optional
Optional
Optional
•
Remote display
•
Flashlight/torch
•
Display
Display hold
•
•
Backlight
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.3 in
•
Specifications
Jaw opening
Max wire size
Current range ac rms
Accuracy ac current
(50/60 Hz)
AC Response
1 in
0.7 in
500 MCM
17 mm
(0.67 in)
0 to 400.0 A
0 to 200.0 A
Averaging
True-rms
Accuracy dc current
2%
± 5 counts
Voltage range ac
True-rms
True-rms
0 to 999.9 A
True-rms
0 to 600.0 A
1.2 % ± 5 counts
2%±5
counts
True-rms
0 to 1000 V
0 to 400 1
2%±5
counts
0 to 600.0 A
True-rms
Frequency
measurement range
For more information, go to www.fluke.com/clamps
1.5 in
1250 MCM
0 to 1400 A
0 to 2500 A
0 to 60 A
1.5 % ± 5 counts
3%
± 5 counts
1%
± 5 counts
True-rms
Averaging
True-rms
True-rms
0 to 200 µA
0 to 2000 A
1%
± 5 counts
1.5 % ± 5 counts
0 to 600.0 V
1%±5
counts
1%±5
counts
0 to 1000 V
0 to 600.0 V
0 to 1000 V
0 to 60 k1
0 to 9999 1
0 to 400 K1
1%±5
counts
1 % ± 5 counts
0 to 6000 1
5.7 in/3.2 in
600.0 V
1.5 % ± 5 counts
0 to 600.0 V
1%±5
counts
True-rms
0 to 999.9 A
2 % ± 5 counts
1%±5
counts
2.3 in
750 MCM or
three 500 MCM
0 to 600.0 V
Voltage range dc
Resistance range
1.2 in
2 % ± 5 counts
0 to 200 A
Accuracy dc voltage
0 to 600.0 A
1.8 % ± 5 counts
Current range dc
Accuracy ac voltage
1.3 in
750 MCM
500 Hz
5 to 1000 Hz
500 Hz
Clamp Meters
7
Pick the right digital multimeter for you
Digital multimeter selection guide
Models
Highest
accuracy
289
Industrial
troubleshooting
87V
Built-in
thermometer
179
Building
maintenance
117
HVAC/R
technicians
116
Remote
Display
233
Insulation
Multimeter
1587
IP 67
Industrial
28 II
Best for
Data logging
Variable speed
drives
Every day use
Wide variety of
electrical work
HVAC
troubleshooting
Perform two-man
jobs alone
Troubleshooting
and preventive
maintenance
Harsh
environments
Basic features
True-rms readings
AC+DC
AC
AC
AC
AC
AC
AC
AC
Basic dc accuracy
0.025 %
0.05 %
0.09 %
0.5 %
0.5 %
0.25 %
0.09 %
0.05 %
Wide bandwidth
100 kHz
20 kHz
•
•
•
•
•
•
•
Digits
4-1⁄2
4-1⁄2
3-1⁄2
3-1⁄2
3-1⁄2
3-1⁄2
Counts
50000
20000
6000
6000
6000
6000
Voltage ac/dc
1000 V
1000 V
1000 V
600 V
600 V
Current ac/dc
10 A
10 A
10 A
10 A
600 µA
500 M1
50 M1
50 M1
40 M1
Frequency
1 MHz
200 kHz
100 kHz
Capacitance
100 mF
10 mF
10 mF
Temperature
+1350 °C
+1090 °C
+400 °C
Auto/manual ranging
20 kHz
•
4-1⁄2
6000
20000
1000 V
1000 V
1000 V
10 A
400 mA
10 A
40 M1
40 M1
50 M1
50 M1
50 kHz
50 kHz
50 kHz
100 kHz
200 kHz
10 mF
10 mF
10 mF
10 mF
10 mF
+400 °C
+400 °C
+500 °C
+1090 °C
Measurements
Resistance
dB
60 dB
Conductance
50 nS
60 nS
Duty cycle/pulse width
•
•⁄–
60 nS
Motor drive measurements/low pass filter
•
•
Continuity with beeper/
diode test
•
•
•
•
•
Low ohms (50 1)
•
•⁄–
•
•
•
•
•
•
•
Display
Dual display
•
Analog bargraph
•
•
•
•
•
Backlight
•
•
•
•
•
•
•
•
Remote display
Data storage and exchange
Time stamp
•
250 µs
250 µs
Display Hold/Auto (Touch)
Hold
•
•
Relative reference
•
•
PC interface
•
Min/Max recording
Fast Min/Max
•
•
•
•
•
•
250 µs
•
•
•
•
•
•
•
Data logging
Readings memories
10,000
Other features
•
Automatic selection, LoZ
•
•
Insulation test range
0.01 M1 to 2 G1
Non-contact ac voltage
detector
•
Real-time clock
•
Overmolded case, integrated holster
•
•
•
Removable holster
•
•
•
•
ToolPak compatibility
•
•
•
•
•
•
Closed case calibration/
separate battery door
•
•
•
•
•
•
•
Automatic power off
•
•
•
•
•
•
•
Low battery indication
•
•
•
•
•
•
•
Operating temperature
ranges
–20 °C, +55 °C
–20 °C, +55 °C
–10 °C, +50 °C
–10 °C, +50 °C
–10 °C, +50 °C
–10 °C, +50 °C
IP 42
IP 30
IP 42
IP 42
Warranty
Limited lifetime
Limited lifetime
Three-years
Three-years
Input alert
•
•
•
•
Completely sealed/
watertight
•
•
IP rating
•
•
–40 °C, +55 °C
IP 30
IP 67
Three-years
Limited lifetime
Warranty and electrical safety
Dangerous voltage
indication
Three-years
•
•
•
•
•
•
•
•
•
CAT III measurements
1000 V
1000 V
1000 V
600 V
600 V
1000 V
1000 V
1000 V
CAT IV measurements
600 V
600 V
600 V
600 V
600 V
600 V
11
12
13
14
15
9
17
10
See page
8
Limited lifetime
Digital Multimeters
For more information, go to www.fluke.com/dmm
Fluke 233 Remote Display
Digital Multimeter
The Fluke 233 Remote Display Digital Multimeter allows
you to be in two places at once. The removable display
solves several problems. First, you no longer have to hold
both the meter and the test leads to make a measurement. Second, making measurements in hard-to-reach
places is much easier, and third, it allows you to take
measurements in machines or panels that are physically
separated from a limit switch or an isolator switch. The
Fluke 233 is also designed to work in areas where the
operator can’t be close to the active measurement point,
like clean rooms or hazardous areas.
• Wireless technology allows the display to be carried
up to 30 feet away from the point of measurement for
added flexibility
• The removable magnetic display can be conveniently
mounted where it is easily seen
• Low-power 802.15.4 wireless technology does not
interfere with measurement accuracy
• Use as a conventional multimeter when the display is
connected
• True-rms ac voltage and current
• Built-in thermometer
• Auto power off maximizes battery life (400 hours)
• Radio transmitter automatically turns off when the
display is connected to the meter
• Record signal fluctuations using the Min/Max function
True
RMS
Made in
the U.S.A.
of U.S. and
non U.S.
parts
Features
Recommended
Product
video accessories
View this product demonstration
to learn more about the Fluke 233.
www.fluke.com/233video
Application note
The new Fluke 233 wireless
digital multimeter
What if, as
an electrical
professional,
you could
take a clampon ammeter
reading using
your
digital
Recommended
multimeter
(DMM) with
the disconnect door or
MCC cubicle
door closed?
kits
Download this application note at
www.fluke.com/233dmm
Features
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)
10,000 μF capacitance range
Frequency to 50 kHz
Recommended accessories
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
Three-year warranty
Specifications
Functions
Specifications
DC voltage
Range
Accuracy
0.25 % + 2
AC voltage
Range
0.1 mV to 1000 V
Accuracy
1.0 % + 3
DC current
Range
0.1 mA to 10 A
Accuracy
1.0 % + 3
AC current
Range
0.1 mA to 10 A
Accuracy
1.5 % + 3
Resistance
Range
0.1 Ω to 40 MΩ
0.1 mV to 1000 V
Capacitance
1000 nF to 9999 µF
Frequency
0.1 Hz to 50.00 kHz
Temperature
-40 °C to +400 °C (-40 °F to 752 °F)
Power
Three AA batteries main body, two AA batteries display module
Battery life
400 hours
Compliance
CAT IV 600 V , CAT III 1000 V
Size (HxWxL)
5.3 cm x 5.3 cm x 19.3 cm (2.08 in x 2.08 in x 7.6 in)
Weight
604 g (1.3 Ib)
TPAK
TL220
Magnetic
Meter Hanger
See page 62
SureGrip Industrial
Test Lead Set
See page 53
80PK-9
i400s
General Purpose Probe
See page 58
AC Current Clamp
See page 60
80AK-A
C35
Thermocouple Adapter
See page 59
Soft Carrying Case
See page 54
Ordering information
Included accessories
Models
Test leads, temperature probe,
alligator clips, batteries, users
manual.
FLUKE-233
Remote Display Multimeter
Check price and availability at
www.fluke.com/wtb
Digital Multimeters
9
Fluke 27 II/28 II Industrial
Digital Multimeters
The 27 II and 28 II Digital Multimeters are designed
for tough work environments. Both meters have
IP 67 waterproof and dustproof rating. They both
have an extended operating temperature range
of -15 °C to + 55 °C (5 °F to 131 °F) and 95 %
humidity.
• Unique function for accurate voltage and
frequency measurements on adjustable speed
motor drives and other electrically noisy equipment (28 II)
• Built-in thermometer conveniently allows you
to take temperature readings without having to
carry a separate instrument (28 II)
• Hi-resolution 20,000 count display mode (28 II)
• Resistance and continuity. Relative mode to
remove test lead resistance from low ohms
measurements
• Large digit display with bright, two-level
backlight
• Backlit keypad buttons allow for easy visibility
in low-lit areas
• Optional magnetic hanger for easy setup and
viewing freeing your hands for other tasks
• U.S. Mine Safety and Health Administration
(MSHA) approved
United States Department of Labor
Made in
the U.S.A.
of U.S. and
non U.S.
parts
True
RMS
MSHA
Mine Safety and Health Administration
Features
Features
Tested to withstand a 3 m (10 ft) drop
Product video
How dirty does your DMM get?
Watch the video below to see more.
www.fluke.com/dirtydmm
Application note
Tough places, tough tools
Out on the
job site,
concrete
finishers
stand ready
to shape wet
ready-mix
into a new
stretch of
highway.
Mixer trucks
are lined up
at the concrete batch
plant, waiting
to take on their loads. But hold on—an
electrical problem has shut down the
plant. It’s time to call Keithly Electric.
Wide 1000 V measurement range
Download this application note at
www.fluke.com/toughdmms
True-rms ac voltage and current for accurate measurements on non-linear signals (28 II)
Average responding voltage and current measurements (27 II)
10 A continuous (20 A for 30 seconds)
Frequency and capacitance
Recommended accessories
Record signal fluctuations using the Min/Max function
Specifications
Specification
DC voltage
27 II
28 II
Range
0.1 mV to 1000 V
Accuracy
AC voltage
Range
DC current
Range
AC current
Range
Resistance
Range
0.05 % +1
0.05 % + 1
0.1 mV to 1000 V
Accuracy
0.5 % +3
0.7 % +4
0.2 % + 4
0.2 % + 4
0.1 µA to 10 A
Accuracy
1.5 % + 2
1.0 % + 2
0.1 Ω to 50 MΩ
Display counts
6000
Capacitance
6000 / 19,999
1 nF to 9999 µF
Frequency
0.5 Hz to 199.99 kHz
Temperature
-200 °C to +1090 °C
Low pass filter (measurement on VSD’s)
PV350
i410
Pressure-Vacuum Module
See page 63
AC/DC Current Clamp
See page 60
Yes
Compliance
CAT IV 600 V , CAT III 1000 V
Measurement method
Avg. responding
Power
True-rms
Three AA batteries
Battery life
800 hours
Dimensions (DxWxH)
2.5 in x 3.93 in x 7.8 in
Weight with holster
698.5 g (1.54 lb)
Ordering information
Included accessories
Models
Test leads, temperature probe,
alligator clips, batteries, holster,
users manual.
FLUKE-27-II
Industrial Multimeter
FLUKE-28-II
Industrial Multimeter
Digital Multimeters
TLK-225
SureGrip Master
Accessory Set
See page 55
0.1 µA to 10 A
Accuracy
10
TPAK
Magnetic
Meter Hanger
See page 62
CXT80
C550
Extreme Hard Case
See page 54
Tool Bag
See page 54
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/dmm
Fluke 289 and 287 True-rms
Logging Multimeters
Find little problems before they become big ones.
The Fluke 289 and 287 are the next generation in high
performance industrial logging multimeters.
• Large 50,000 count,
1/4 VGA dot matrix
display with white
backlight
• Logging function
with expanded memor
for unattended monito
of signals over time. Using
TrendCapture displays V dc logged data.
on-board TrendCapture,
users can graphically review logged readings without needing a PC. Store up to 10,000 recorded events
• Save, name, and recall multiple logging sessions
before PC download is necessary
• Zoom on trend, provides unprecedented ability to
view and analyze TrendCapture data; zoom in up to
14 times
• Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and
comparing differences in motor winding resistance or
contact resistance (289)
• Low pass filter for accurate voltage and frequency
measurements on adjustable speed motor drives and
other electrically noisy equipment (289)
• LoZ volts. Low impedance voltage function for
eliminating ghost voltages. Also recommended when
testing for absence or presence of live power (289)
True
RMS
Recommended accessories
TLK289
TLK287
Industrial
Test Lead Set
See page 55
Electronic
Test Lead Set
See page 55
TPAK
i410
Magnetic Meter Hanger
See page 62
AC/DC Current Clamp
See page 61
FVF-SC2
C280
FlukeView Forms
See page 63
Soft Case
See page 54
Recommended kits
Made in
the U.S.A.
of U.S. and
non U.S.
parts
Features
Features
Multiple on screen displays
Yes
True-rms ac bandwidth
100 kHz
dBV/dBm
Yes
DC mV resolution
1 µV
Megohm range
up to 500 M1
Conductance
50.00 nS
Continuity beeper
Yes
Elapse time clock/time of day clock
Yes
Min/Max/Avg/duty cycle/pulse width
Yes
Isolated optical DMM interface with USB PC connection
Yes
Auto/touch hold
Yes
Over 200 hours logging capacity with new power saving function
Warranty
Yes
289/FVF kit includes:
• True-rms industrial logging multimeter with
TrendCapture
• FlukeView Forms Software and cable
• Temperature probe
• Silicone test lead set
• Alligator clips
• Meter hanging accessory
• Soft case
Limited lifetime
Specifications
Functions
Range and resolution
AC volts or dc volts
50.000 mV, 500.00 mV, 5.0000 V, 50.000 V,
500.00 V, 1000.0 V
Basic Accuracy
AC current dc current
500.00 µA, 5000.0 µA, 50.000 mA, 400.00 mA,
5.0000 A, 10.000 A
Temperature (excluding probe)
-200.0 °C to 1350.0 °C (-328.0 °F to 2462.0 °F)
1.0 %
Resistance
50.000 1, 500.00 1, 5.0000 k1, 50.000 k1, 500.00 k1, 5.0000 M1,
50.00 M1, 500.0 M1
0.05 %
Capacitance
1.000 nF,10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 1000 µF,
10.00 mF, 100 mF
1.0 %
Frequency
99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz
.005 %
0.025 %
0.4 % (true-rms) (AC)
0.15 %
0.7 % (true-rms)
287/FVF kit includes:
Ordering information
Included accessories
Models
Test leads, alligator clips,
holster, 9 V battery (installed),
users manual on CD, getting
started guide.
FLUKE-289
True-rms Industrial Logging Multimeter with TrendCapture
FLUKE-287
True-rms Electronics Logging Multimeter with TrendCapture
FLUKE-289/FVF
True-rms Industrial Logging Multimeter Combo Kit with TrendCapture
FLUKE-287/FVF
True-rms Electronics Logging Multimeter Combo Kit with TrendCapture
For more information, go to www.fluke.com/dmm
• True-rms electronic logging multimeter with
TrendCapture
• FlukeView Forms Software and cable
• Temperature probe
• Modular test leads (red, black)
• Modular test probes (red, black)
• Alligator clips (red, black)
• Soft case
Check price and availability at
www.fluke.com/wtb
Digital Multimeters
11
Fluke 87V Industrial Multimeter
For industrial productivity
The Fluke 87V has measurement functions, troubleshooting features, resolution and accuracy to solve
more problems on motor drives, in-plant automation,
power distribution and electro-mechanical equipment.
• Unique function for accurate voltage and frequency
measurements on adjustable speed motor drives and
electrically noisy equipment (87V and 87V Ex)
• Large digit display with bright two level backlight
makes the 87V significantly easier to read
• Measure 20 A for up to 30 sec, 10 A continuously
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks (TPAK)
• Expanded capacitance range to 10,000 µF
Specialty models
Fluke 87V Ex
Intrinsically Safe
True-rms Multimeter
See page 39 for more
information.
Electrical safety
All inputs are protected to CAT III 1000 V and CAT IV
600 V. They can withstand impulses in excess of
8,000 V to help protect you from arc blast resulting
from surges and spikes.
Recommended accessories
Available in intrinsically safe version as the
Fluke 87V Ex.
Also available as 83V average responding
multimeter, see below for specifications.
Made in
the U.S.A.
of U.S. and
non U.S.
parts
TPAK
TL220
Magnetic
Meter Hanger
See page 62
SureGrip Industrial
Test Lead Set
See page 55
True
RMS
Features
Features
87V Ex
•
87V
•
83V
Measure up to 1000 V ac and dc
•
•
•
Auto and manual ranging for maximum flexibility
•
•
•
Analog bargraph
•
•
•
Frequency to 200 kHz and % duty cycle
•
•
•
Min/Max and average recording to capture variations automatically
•
•
•
Relative mode to remove test lead resistance from low ohms measurements
•
•
•
Access door for fast battery changes without breaking the calibration seal
•
•
•
One-year
•
•
Peak capture to record transients as fast as 250 µs
Limited lifetime warranty
PV350
i400
Pressure-Vacuum Module
See page 63
AC Current Clamp
See page 60
L210
CXT80
Probe Extender with Light
See page 62
Extreme Case
See page 54
Recommended kits
Specifications
Basic accuracy
Functions
Range and resolution
87V
DC volts
83V
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
0.05 %
0.1 %
AC volts
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
0.7 % (true-rms)
0.5 %
DC current
600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A
0.2 %
0.4 %
AC current
600.0 µA, 6000 µA, 60.00 µA, 600.O mA, 6.000 A, 10.00 A
1.0 % (true-rms)
1.2 %
Temperature (excl. probe)
-200 °C to 1090 °C (-328 °F to 1994 °F)
80BK Temperature Probe
-40 °C to 260 °C (-40 °F to 500 °F)
Resistance
600.0 1, 6.000 k1, 60.00 k1, 600.0 k1, 6.000 M1, 50.00 M1
0.2 %
Capacitance
10.00 nF, 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 9,999 µF
1.0 %
1.0 %
Frequency
199.99 Hz, 1.9999 kHz, 19.999 kHz, 199.99 kHz
0.005 %
0.005 %
1.0 %
2.2 °C or 2 %
0.4 %
Battery life: 400 hours typical with backlight off. Size (LxWxD): 201 mm x 98 mm x 52 mm (7.9 in x 3.8 in x 2 in).
Weight: 355 g (22 oz).
Ordering information
Included accessories
Models
Test leads, alligator clips, holster, 9 V battery
(installed), temperature probe (87V only), users
manual on CD, operator’s guide.
FLUKE-87-5
Industrial True-rms Multimeter with Temperature
FLUKE-83-5
Industrial Multimeter
FLUKE-87V Ex
Intrinsically Safe True-rms Multimeter
FLUKE-87-5/E2
Industrial Electrician’s Combo Kit
Fluke 87V/E2 Industrial Electrician’s Combo Kit
• Industrial multimeter
• Lightweight soft case to provide optimal protection
and storage
• 1.5 m silicone leads resist heat
• Removable probes with 4 mm of exposed metal for
use on industrial circuits
• Retractable long reach alligator clips
• Meter hanging accessory
• Type K temperature probe
Check price and availability at
www.fluke.com/wtb
12
Digital Multimeters
For more information, go to www.fluke.com/dmm
Fluke 170 Series Digital Multimeters
For maintenance and field service
The Fluke 179 True-rms Multimeter has the features
needed to find most electrical and HVAC problems.
Simple to use with significant improvements over the
original Fluke 70 Series.
• Wide 1000 V measurement range
• True-rms for precise measurement of non-linear
signals
• Capacitance, resistance, continuity and frequency
• Built-in thermometer (Fluke 179 only)
• Large, easy-to-read display
• Backlight for work in dimly lit areas
(Fluke 177 and179 only)
• Min/Max/Avg to record signal fluctuations
• Display hold and auto hold
• Manual and automatic ranging
Recommended accessories
TPAK
TL238
Magnetic
Meter Hanger
See page 62
Test Lead Set for High
Energy Environments
See page 57
Electrical safety
All inputs are protected to measurement CAT III 1000 V
and CAT IV 600 V. This meter can withstand transient
impulses in excess of 8000 V to help protect you from
arc blasts resulting from surges and spikes.
Made in
the U.S.A.
of U.S. and
non U.S.
parts
True
RMS
FOM
i2000 Flex
Fiber Optic Meter
See page 63
AC Current Clamp
See page 60
LVD2
C35
Volt Light
See page 62
Soft Carrying Case
See page 54
Recommended kits
Features
Features
179
177
175
Max voltage
1000
•
1000
•
1000
•
0.09 %
•
0.15 %
True-rms
•
Temperature
Basic dc accuracy
0.09 %
•
Backlight
Min/Max/Avg
ToolPak meter hanging kit with magnet
Limited lifetime warranty
•
•
•
Opt
•
Opt
•
Opt
•
Specifications
Functions
DC voltage
Range and resolution
Best accuracy
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
± 0.09 % (Models 177 and 179)
± 0.15 % (Model 175)
± 1.0 % of reading
AC voltage1
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
DC current
60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2
± 1.0 % of reading
AC current 2
60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2
± 1.5 % of reading
Resistance
600.0 1, 6.000 k1, 60.00 k1, 600.0 k1, 6.000 M1, 50.00 M1
± 0.9 % of reading
Capacitance
1000 nF, 10.00 µF, 100.0 µF, 9999 µF
± 1.2 % of reading
Frequency 3
99.99 Hz, 999.9 Hz, 9.999 Hz, 99.99 kHz
± 0.1 % of reading
-40 ºC to +400 ºC (-40 ºF to +752 ºF)
1.0 % of reading
Temperature (Model 179)
1All ac voltage and ac current ranges are specified from 5 % of range to 100 % of range.
210 A continuous, 20 A for up to 30 seconds.
3Voltage frequency is specified from 2 Hz to 100 kHz. Current frequency is specified from
Ordering information
Models
Test leads, 9 V battery (installed) and
manual. The Fluke 179 comes with
an additional temperature probe.
FLUKE-179
Digital Multimeter
FLUKE-175
Digital Multimeter
FLUKE-177
Digital Multimeter
FLUKE-179/1AC-II
Electricians Combo Kit
FLUKE-179/EDA2
Electronics Combo Kit
•
•
•
•
•
•
•
True-rms digital multimeter
Soft case
Electronic test probes
SureGrip™ silicone test leads
SureGrip™ heavy duty hook clips
Type K temperature probe
Meter hanging accessory
2 Hz to 30 kHz.
Battery life: 200 hours typical for alkaline.
Size (HxWxL): 4.3 cm x 9.0 cm x 18.5 cm (1.7 in x 3.5 in x 7.3 in).
Included accessories
179/EDA2 Electronics Multimeter and
Deluxe Accessory Combo Kit
179/1AC-II Electrician’s Multimeter and
Voltage Tester Combo Kit
•
•
•
•
•
•
•
•
True-rms digital multimeter
Non-contact voltage detector
Soft case
Alligator clips
SureGrip™ test probes
Silicone test leads, 1.5 m
Type K temperature probe
Meter hanging accessory
Check price
price and
and availability
availabilityat
at
www.fluke.com/wtb
www.fluke.com/wtb
For more information, go to www.fluke.com/dmm
Digital Multimeters
13
Fluke 117 and 115
True-rms Digital Multimeters
The 117 Digital Multimeter includes integrated noncontact voltage detection to help get the job done faster.
The Fluke 115 Digital Multimeter is the solution
for a wide variety of electrical and electronic testing
applications.
• VoltAlert ™ technology for integrated non-contact
voltage detection (117)
• AutoVolt feature for automatic ac/dc voltage selection
(117)
• LoZ: Low input impedance prevents false readings
due to “ghost voltage” (117)
• Large display and white LED backlight to work in
poorly lit areas more effectively
• Compact ergonomic design for one-handed operation
• Min/Max/Avg to record signal fluctuations
• Compatible with optional magnetic hanger (TPAK) for
hands free operation
• Current measurement 20 A (30 seconds momentary; 10 A continuous)
• Resistance, continuity, frequency
and capacitance
Fluke 117
Specialty model
Fluke 113
• Basic electrical and
utility multimeter
• VCHEK™ LoZ low
impedance measurement function to
simultaneously test for
voltage or continuity
• True-rms for accurate
ac measurements on
non-linear loads
• Record signal fluctuations using the
Min/Max function
• Diode and capacitance measurements
• Integral holster with probe holders
for easy storage
• Auto and manual ranging for added
user functionality
• Meets CAT III 600 V and CAT IV 300 V
standards for a higher level of safety
Fluke 115
Recommended accessories
True
RMS
Features
Features
117
VoltAlert ™
•
115
AutoVolt/LoZ
•
Analog bargraph
•
•
•
Large backlit digital display
•
•
•
True-rms for accurate measurements on non-linear loads
•
•
•
Min/Max recording
•
•
•
Display hold
•
•
•
3-1⁄2 digits
•
•
•
6000 counts
•
•
•
CAT III 600 V safety rated
•
•
•
Three-year warranty
•
•
•
TPAK
TL220
Magnetic
Meter Hanger
See page 62
SureGrip Industrial
Test Lead Set
See page 55
113
LoZ
LVD2
C35
Volt Light
See page 62
Soft Carrying Case
See page 54
Recommended kits
Specifications
Functions
117
115
113
Accuracy
Volts ac/dc
600 V
600 V
600 V
0.5 % + 2
Current ac/dc
10 A
10 A
40 M1
40 M1
60 k1
0.9 % + 2
Resistance
Capacitance
1 nF to 9,999 µF
1 nF to 9,999 µF
Diode test
Yes
Yes
Frequency
5 Hz to 50 kHz
5 Hz to 50 kHz
1.0 % + 3
1.9 % + 2
Yes
0.1 % + 2
Ordering information
117/322 Electrician’s Combo Kit
Included accessories
Models
Test leads, holster, users
manual and 9 V battery
(installed).
FLUKE-117
Multimeter with Non-Contact Voltage
FLUKE-115
Multimeter
FLUKE-113
Utility Meter
FLUKE-117/322
Electrician’s Combo Kit
• True-rms digital multimeter with
non-contact voltage detection
• Compact clamp meter
• Test lead set
• Magnetic meter hanging strap
• Deluxe carrying case with shoulder strap
Check price and availability at
www.fluke.com/wtb
14
Digital Multimeters
For more information, go to www.fluke.com/dmm
Fluke 116 and 114 Digital Multimeters
HVAC/R and electrical troubleshooting
The Fluke 116 Digital Multimeter was specifically
designed for the HVAC professional.
The Fluke 114 Digital Multimeter is the best troubleshooting tool for “go/no-go” testing.
• Built in thermometer for HVAC applications (116)
• Microamps to test flame sensors (116)
• AutoVolt: Automatic ac/dc voltage selection (114)
• LoZ: Helps prevent false readings due to ghost voltage
• Min/Max/Avg to record signal fluctuations
• Resistance, continuity, frequency and capacitance
• Large white LED backlight to work in poorly lit areas
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (TPAK)
Recommended accessories
Fluke 116
80AK-A
80PK-24
DMM Adapter
See page 59
SureGrip Air
Temperature Probe
See page 58
80PK-18
80BK-A
Pipe Clamp
Temperature Probe Kit
See page 58
Integrated
Temperature Probe
See page 58
Recommended kits
Fluke 116
Fluke 114
True
RMS
Features
Features
116
114
116/322 HVAC Combo Kit
Temperature
•
Microamps
•
Frequency
•
Capacitance
•
Diode test
•
AutoVolt/LoZ
•
•
Analog bargraph
•
•
Large backlit digital display
•
•
True-rms for accurate measurements on non-linear loads
•
•
Min/Max recording
•
•
Display hold
•
•
3-1⁄2 digits
•
•
6000 counts
•
•
CAT III 600 V safety rated
•
•
Three-year warranty
•
•
•
•
•
•
•
•
•
•
HVAC multimeter with temperature and microamps
Compact clamp meter
Test lead set
Pipe wrap thermocouple
Thermocouple adapter
Thermocouple bead probe
Meter hanging accessory
Deluxe carrying case with shoulder strap
Specifications
Functions
Range and resolution
Best accuracy
Volts ac/dc
600 V
0.5 % + 2
Current ac/dc (116 only)
600.0 µA
1.0 % + 2
Temperature (116 only)
+400 °C
1.0 % + 18
40 M1
0.9 % + 2
1 nF to 9,999 µF
1.9 % + 2
5 Hz to 50 kHz
0.1 % + 2
Resistance
Capacitance (116 only)
Frequency (116 only)
Ordering information
Included accessories
Models
Test leads, integrated temperature probe (116 only),
holster, users manual and 9 V battery (installed).
FLUKE-114
Electrical Multimeter
FLUKE-116/62
HVAC Combo Kit
FLUKE-116/322
HVAC Combo Kit
FLUKE-116
116/62 HVAC Combo Kit
•
•
•
•
•
•
•
•
HVAC multimeter with temperature and microamps
Infrared thermometer
Test lead set
Pipe wrap thermocouple
Thermocouple adapter
Type K integrated temperature probe
Magnetic meter hanging strap
Deluxe carrying case with shoulder strap
HVAC Multimeter with Temperature and Microamps
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/dmm
Digital Multimeters
15
Fluke 88V and 77 IV Digital Multimeters
For automotive, field service or bench repair
uke 88V Automotive Multimeter
e Fluke 88V Automotive Multimeter is designed to
p automotive professionals solve problems faster.
is DMM has the measurement functions, troubleshootg features and accuracy to solve virtually any problem
th conventional and hybrid vehicles.
Automotive test functions include dc and ac voltage,
resistance and current
Min/Max recording for logging the highest and lowest
readings over time
Frequency measurements for magnetic sensors and
ac/dc frequency signals
Duty cycle for variable duty cycle signals with selectable trigger, slope and level
Pulse width for fuel injector on-time measurements
Conductance testing for secondary ignition coils
RPM measurements for DIS and conventional ignition
systems
Built-in thermometer
Made in
the U.S.A.
of U.S. and
non U.S.
parts
Recommended accessories
Fluke 88V
TP40
TP88
Automotive Back
Probe Pin Set
See page 56
Rigid Back Probe
Pin Set
See page 56
TLK281
TLK282
Automotive
Test Lead Kit
See page 56
Deluxe Automotive
Test Lead Kit
See page 56
Fluke 77 IV
Fluke 77 IV Digital Multimeter
The 77 IV Digital Multimeter has the features needed
to repair most electrical and electronic problems. This
meter is simple to use and has significant improvements
over Fluke’s original 70 Series with more measurement
functions, conformance to the latest safety standards,
and a much larger display that’s easier to view.
• Wide 1000 V measurement range
• Average responding ac measurements
• 0.3 % accuracy
• 10 amps continuous
• Frequency and capacitance
• Resistance and continuity
• Large display
• Backlight for work in dim areas
• Min/Max to record signal fluctuations
• Integral holster with probe holders
• Free your hands with the optional TPAK magnetic
hanger
• Auto and manual ranging
TPAK
i400
Magnetic Meter Hanger
See page 62
AC Current Clamp
See page 60
TL225
TLK-225
SureGrip Stray Voltage
Adapter Test Lead Kit
SureGrip Master
Accessory Kit
See page 55
Recommended kits
Made in
the U.S.A.
of U.S. and
non U.S.
parts
Specifications (77 IV)
Range
Best accuracy
V dc
Functions
600.0 mV to 1000 V
± (0.3 % + 1)
0.1 mV
V ac
6.000 V to 1000 V
± (2.0 % + 2)
1.0 mV
A dc
60.00 mA to 10 A
± (1.5 % + 2)
0.01mA
A ac
60.00 mA to 10 A
± (2.5 % + 2)
0.01 mA
Resistance
600.0 Ω to 50 MΩ
± (0.5 % + 1)
0.1 Ω
Capacitance
1 nF to 9,999 µF
± (1.2 % + 2)
1 nF
99.99 Hz to 99.99 kHz
± (0.1 % + 1)
0.01 Hz
Frequency
Best resolution
Ordering information
Included accessories
Models
Test leads, carrying case (88V only), users
manual and 9 V battery (installed).
FLUKE-88-5
Automotive Multimeter
FLUKE-77-4
Digital Multimeter
FLUKE-88-5/A KIT
Automotive Multimeter Combo Kit
•
•
•
•
•
•
•
•
•
•
Automotive multimeter
Heat resistant silicone test leads
Removable sharp point test probes
Large jaw alligator clips
Temperature probe
Inductive pick-up
Automotive backprobe pins
Insulation piercing probe
Meter hanging accessory
Durable carrying case
Check price and availability at
www.fluke.com/wtb
16
Digital Multimeters
For more information, go to www.fluke.com/dmm
Fluke 1587 and 1577
Insulation Multimeters
Two powerful tools in one
The Fluke 1587 and 1577 Insulation Multimeters combine
a digital 1 kV insulation tester with a full-featured, truerms digital multimeter in a single compact, handheld unit,
which provides maximum versatility for both troubleshooting and preventive maintenance.
• Insulation test (1587: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to
600 MΩ)
• Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V,
1000 V), (1577: 500 V, 1000 V) for many applications
• Live circuit detection prevents insulation test if voltage
> 30 V is detected for added user protection
• Auto-discharge of capacitive voltage for added user
protection
• Filter for motor drive measurements (1587 only)
• AC/DC voltage, dc millivolts, ac/dc milliamps, resistance
(W), and continuity
• Capacitance, diode test, temperature,
Min/Max, and frequency (Hz) (1587 only)
• Auto power off to save battery power
• Large display with backlight and large
digits
• Included accessories: Remote probe, test
leads and probes, alligator clips, (Type K
thermocouple, 1587 only)
• Accepts optional Fluke TPAK magnetic
hanging system to free your hands for
other work
• Rugged, utility hard case allows you to
bring everything you need for the job
Fluke 1577
Fluke 1587
Recommended accessories
TPAK
i400s
Magnetic Meter Hanger
See page 62
AC Current Clamp
See page 60
C25
TL27
Meter Case
See page 54
Heavy Duty
Test Leads
Recommended kits
Get more value and productivity
Establishing a preventive maintenance program is
becoming critical to maintaining the uptime of electrical
equipment and can significantly reduce both planned
and unplanned downtime. Unplanned downtime costs
are difficult to calculate, but are often significant. For
some industries, it can represent 1 % to 3 % of revenue
(potentially 30 % to 40 % of profits) annually.
These kits can help you be proactive and efficient with
your maintenance and can save you up to 10 % off the
individual price of the tools.
True
RMS
Specifications
Features
1587
Insulation test voltages 50 V, 100 V,
250 V, 500 V, 1000 V
1577
•
Auto-discharge of capacitive voltage
1503
•
•
Insulation test voltages 500 V, 1000 V
Insulation resistance
1507
0.01 M1 to 2.0 G1
•
0.1 M1 to 600 M1
•
•
0.01 M1 to 10 G1
•
0.1 M1 to 2 G1
•
Insulation test smoothing reading
•
Frequency
•
Capacitance
•
Diode test
•
Temperature
•
Min/Max
•
Low-pass filter (for work on VSDs)
•
AC/DC Voltage
•
•
DC millivolts
•
•
AC/DC milliamps
•
•
0.1 1 to 50 M1
•
0.1 1 to 50 M1
•
0.1 1 to 20.00 K1
0.1 1 to 20.00 K1
Three-year
•
Three-year
•
One-year
•
One-year
•
Resistance
Continuity
Warranty
Remote probe, test leads, alligator clips
Fluke 1587/ET Advanced Electrical
Troubleshooting Kit includes:
• Fluke 1587 Insulation Multimeter
• Fluke i400 Current Clamp
• Fluke 62 Mini Infrared Thermometer
•
Type K thermocouple
Rugged, utility hard case
•
•
•
•
Auto power off
•
•
•
•
Page number
17
17
24
24
Fluke 1587/MDT Advanced Motor and Drive
Troubleshooting Kit includes:
• Fluke 1587 Insulation Multimeter
• Fluke i400 Current Clamp
• Fluke 9040 Phase Rotation Indicator
Ordering information
Included accessories
Models
Remote probe, test leads,
alligator clips, Type K
thermocouple (1587 only), hard
case and users manual.
FLUKE-1577
Insulation Multimeter
FLUKE-1587
Insulation Multimeter
FLUKE-1587/ET
Advanced Electrical Troubleshooting Kit
FLUKE-1587/MDT
Advanced Motor and Drive Troubleshooting Kit
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/dmm
Digital Multimeters
17
Fluke 421D, 416D and 411D
Laser Distance Meters
The Fluke laser distance meters offer the most advanced measuring technology available. Unlike ultrasonic distance meters
with laser pointers, these meters use a precision narrow laser
beam that helps avoid the common errors caused by extraneous
objects near measurement targets.
• Eliminate estimation errors, saving both time and money
• Instant measurement with one-button operation
• Easy targeting with bright laser
• Quick calculation of area (square footage) and volume
• Easy addition and subtraction of measurements
• Two-year warranty
Application tip
Ways laser distance meters
save time and money
1. Fast measurements: Point. Click.
The measurement is done.
2. Easy access: High ceiling?
Obstacles in the way? Just aim
the laser.
3. One man operation: Your helper
can do other jobs.
4. Longer distances: Up to 100
meters (330 feet).
5. Calculations: Add and subtract
distances. Find area and volume.
Even calculate height using
Pythagorean math.
See why Chip Wade and other
experts use distance meters.
www.fluke.com/ldm-video
Fluke 416D
Fluke 411D
Specifications
Recommended kits
Features
Range (for extended distances, use
a target plate)*
Measuring accuracy**
Fluke 421D
Fluke 416D
Fluke 411D
0.05 m to 100 m
(0.16 ft to 330 ft)
0.05 m to 60 m
(0.16 ft to 200 ft)
0.1 m to 30 m
(0.33 ft to 100 ft)
± 3 mm (0.118 in)
± 1.5 mm (± 0.059 in)
± 1.5 mm (± 0.059 in)
Laser class
II
II
II
Laser type
635 nm, < 1 mW
635 nm, < 1 mW
635 nm, < 1 mW
Automatic power off
after 180 seconds
After 180 seconds
after 180 seconds
Continuous measurement
•
•
•
Addition/subtraction
•
•
•
up to 5,000 measurements
up to 3,000 measurements
up to 3,000 measurements
•
•
—
20
10
—
Battery life
LCD illumination
Data locations
Min/Max
•
•
—
Audible feedback
•
•
—
Simple
Pythagoras (Indirect measurement)
Full
Full
Room angle and stakeout
•
—
—
±45 ° Tilt sensor/indirect measure
•
—
—
Ingress protection
Dimensions
IP54
IP54
IP40
127 mm x 52 mm x 29 mm
(5.00 in x 2.06 in x 1.13 in)
135 mm x 46 mm x 31 mm
(5.31 in x 1.81 in x 1.22 in)
123 mm x 50 mm x 26 mm
(4.84 in x 1.97 in x 1.02 in)
125 g (4.40 oz)
110 g (3.88 oz)
150 g (5.29 oz)
-25 °C to 70 °C
(-13 °F to 158 °F)
0 °C to 40 °C
(32 °F to 104 °F)
-25 °C to 70 °C
(-13 °F to 158 °F)
0 °C to 40 °C
(32 °F to 104 °F)
-25 °C to 70 °C
(-13 °F to 158 °F)
0 °C to 40 °C
(32 °F to 104 °F)
Weight
Temperature range
Storage
Operation
Operating altitude (ISO 9022)
Storage humidity (at 35 °C)
up to 3500 m
up to 3500 m
up to 3500 m
maximum 85 % for 24 h
maximum 85 % for 24 h
maximum 85 % for 24 h
AAA (2)
AAA (2)
AAA (2)
Batteries
* In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such as
intensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, measuring accuracy may
deteriorate to approx. ± 0.25 mm/m (± 0.003 in/ft) for distances above 10 m (33 ft).
** In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such as
intensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, the deviation over distances
10 m (33 ft) can increase by approx. ± 0.15 mm/m (± 0.0018 in/ft).
Ordering information
18
Models
Two AAA batteries, users manual on CD,
quick start guide, nylon carrying case.
FLUKE-421D
Laser Distance Meter
FLUKE-416D
Laser Distance Meter
FLUKE-411D
Laser Distance Meter
FLUKE-411D/62
411D Laser Distance Meter and 62 IR Thermometer Kit
FLUKE-9040
Rotary Field Indicator
Laser Distance Meters
Other products
Fluke 9040 Rotary
Field Indicator
The Fluke 9040 is
a premium phase
rotation tester
with a CAT III,
600 V rating.
The frequency
range is from
15 Hz to 400 Hz
for demanding applications. The clear
liquid crystal display and the holster
make it suitable for rough outdoor
applications. This instrument is
supplied with three unique, expandable test probes that fit most sockets.
Includes a two-year warranty.
For more information, go to
www.fluke.com/9040
Included accessories
Three self-retaining test probes (black),
alligator clip, users manual.
• Fluke 62 Mini Thermometer
• Soft pouch for each model
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/distance
Fluke 1625 and 1623
Geo Earth Ground Testers
The Fluke 1625 and 1623 Earth Ground
Testers not only measure ground resistance using the classic “fall of potential
test,” but also enable time saving testing
using “selective” and “stakeless” methods.
“Selective” testing does not require the
electrode under test to be disconnected
during the measurement, thus increasing safety. The simple “stakeless” method
quickly checks ground connections using
two current transformers (probes) clamped
around the ground conductor under test.
Offering “one-button” simplicity, the 1623
is an all-in-one earth ground tester, while
the 1625 has extra versatility for more
demanding applications.
The 1623 is perfect for performing predictive maintenance checks of commercial
and industrial applications. The 1625 is
intended for electrical utility or other electrically noisy environments.
Fluke 1625
Earth ground resistance and soil
resistivity should be measured when:
• Designing earth ground systems
• Installing new ground system and electrical equipment
• Periodically testing ground and lightning protection systems
• Installing large electrical equipment
such as transformers, switchgears,
machines, etc.
Fluke 1623
Recommended accessories
EI-1623
EI-1625
Selective/stakeless
clamp set for 1623
Selective/stakeless
clamp set for 1625
ES-162P3
ES-162P4
Stake/reel set for
3-pole measurements
Stake/reel set for
4-pole measurements
EI-162BN
Split Core Transformer
for use with Fluke 1625
Recommended kits
Specifications
Features
1625
One-button measurement concept
1623
1621
•
•
•
3-pole earth ground measurement
•
•
4-pole earth ground measurement
•
•
4-pole soil resistivity testing
•
•
2-pole resistance measurement ac
•
•
2-and 4-pole resistance measurement dc
•
Selective testing, no disconnection of ground conductor (1 clamp)
•
•
Stakeless testing, quick ground loop testing (2 clamps)
•
•
•
Measuring frequency 128 Hz
Earth impedance measurement at 55 Hz
•
Automatic frequency control (AFC), 94 Hz to 128 Hz
•
Measuring voltage switchable 20 V/48 V
•
Programmable limits, settings
•
Continuity with buzzer
•
Dust/water resistance
Safety rating
Two-year warranty
•
Fluke 1625 Kit
•
•
•
•
•
•
•
Fluke 1625 tester
2 test leads
4 earth ground stakes
3 cable reels with wire (2-25 m, 1-50 m)
2 clamps (one inducing, one sensing)
Rugged carrying case
•
IP 56
IP 56
IP 40
CAT II 300 V
CAT II 300 V
CAT II 600 V
•
•
•
* In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such as
intensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, measuring accuracy may
deteriorate to approx. ± 0.25 mm/m (± 0.003 in/ft) for distances above 10 m (33 ft).
** In favorable conditions (optimal target surface, room temperature) up to 10 m (33 ft). In unfavorable conditions, such as
intensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, the deviation over distances
10 m (33 ft) can increase by approx. ± 0.15 mm/m (± 0.0018 in/ft).
Ordering information
Fluke 1623 Kit
Included accessories
Models
Test leads, alligator clips, users
manual.
FLUKE-1625
Advanced GEO Earth Ground Tester
FLUKE-1623
Basic GEO Earth Ground Tester
Test leads, alligator clips,
stake/reel set 4-pole, selective/
stakeless clamp set, rugged
carrying case, users manual.
FLUKE-1625 KIT
Advanced GEO Earth Ground Tester Kit
FLUKE-1623 KIT
Basic GEO Earth Ground Tester Kit
•
•
•
•
•
•
Fluke 1623 tester
2 test leads
4 earth ground stakes (2-25 m)
3 cable reels with wire (2-25 m, 1-50 m)
2 clamps (one inducing, one sensing)
Rugged carrying case
These products are for unpowered installations measuring grounding connections.
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/egt
Earth Ground Testers
19
Fluke 1621 Basic Earth Ground Tester
Earth ground tester for resistance measurement
The Fluke 1621 Earth Ground Tester is a rugged, easy-touse tester for three-pole ground resistance measurements
and two-pole ac resistance measurements.
Earth ground resistance is measured by installing earth ground test electrodes, and testing with the
Fluke 1621. Earth ground resistance measurements are
used to ensure safe operation and reduce power quality problems. With a simple user interface and intuitive
functionality, the large, clear LCD display provides high
visibility results in daylight or poor lighting conditions. The 1621 is lightweight making it ideal to test for
lightning protection levels and periodic check-ups during
routine maintenance.
• Three-pole earth resistance measurements
• Two-pole ac resistance measurements
• AC/DC voltage measurement
• Large dual backlit display
• Limit settings for automatic measurement evaluation
• CAT II 600 V
• Two-year warranty
Feature comparison on page 19.
Fluke 1630 Earth Ground
Clamp Meter
Application tip
What is grounding, and
what does it do?
The NEC, National Electrical Code,
defines a ground as a “conducting
connection, whether intentional or
accidental between an electrical circuit
or equipment and the earth, or to some
conducting body that serves in place of
the earth.”
Earth grounding is an intentional
connection from a circuit conductor,
usually the neutral, to a ground electrode placed in the earth. Equipment
grounding is to ensure that operating
equipment within a structure is properly
grounded.
These two grounding systems are
required to be separate except for a
connection between the two systems
to prevent differences in potential from
a possible flashover from a lightning
strike. The purpose of a ground, besides
the protection of people, plants and
equipment, is to provide a safe path for
the dissipation of fault currents, lightning strikes, static discharges, EMI and
RFI signals and interference.
Recommended accessories
The Fluke 1630 Earth Ground Clamp Meter is able to measure
ground loop resistances—using the stakeless testing method.
This test technique eliminates the dangerous, and time consuming activity, of disconnecting parallel grounds, as well as
the process of finding suitable locations for auxiliary ground
stakes. You can also perform earth ground tests in places you
have not considered before: inside buildings, on power pylons
or anywhere you don’t have access to soil.
With the stakeless testing method, the Fluke 1630 Earth
Ground Clamp Meter is placed around the earth ground rod or
the connecting cable. No earth ground stakes are used at all.
A known voltage is induced by one half of the clamp and the
current is measured by the other half. The tester automatically determines the ground loop resistance at this grounding
connection. Gone are the days of spending time placing and
connecting stakes for each earth ground rod on your system—a
major time saver.
• Quick and easy use—no earth ground stakes are necessary
• Large, 35 mm (1.35 in) jaw opening
• Measures ground resistance from 0.025 Ω to 1500 Ω
• Measures ground leakage current from 0.2 mA to 30 A
• High and low alarming
• Automatic self calibration
• Rugged carrying case and resistance check loop included
• Two-year warranty
Cable Reel 50 m
Cable Reel 25 m
Ground/earth wire
(162.5 ft)
Ground/earth wire
(81.25 ft)
ES-162P3
Earth Stake
Stake/reel set for
3-pole measurements
Ground/earth
stake
Recommended kits
Ordering information
Fluke 1621 Tester
Included accessories
Models
Two measuring leads with alligator clips, 2 m
(6 ft), yellow protective holster, 9 V alkaline
battery (LR61), users manual, CD.
FLUKE-1621
Basic Earth Ground Tester
1-50 m cable reel, 1-25 m cable reel, 3 earth
stakes, 2 test leads, 2 alligator clips, carrying
case, yellow protective holster, 9 V alkaline
battery (LR61), users manual, CD.
FLUKE-1621 KIT
Basic Earth Ground Tester Kit
Rugged carrying case with belt, resistance
test loop, 9 V battery, users manual.
FLUKE-1630
Earth Ground Clamp Meter
These products are for unpowered installations measuring grounding connections.
20
Earth Ground Testers
•
•
•
•
•
2 cable reels with wire (1-50m, 1-25m)
3 earth ground stakes
1 Test lead (red and black 2m)
2 Alligator Clips
Hard carrying case
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/egt
Fluke T5, T+PRO, T+ Electrical
Testers and VoltAlert ™
Fluke T+PRO and
T+ Electrical Testers
Recommended accessories
• Three forms of ac/dc voltage detection: Light, sound and vibration
• Detects live voltage even when
batteries are dead
• Extra heavy-duty, replaceable test
leads
• Rotary field indicator for troubleshooting three-phase systems
• Continuity beeper, LED flashlight
and GFCI trip
H5
Meter Cleaner
Electrical Tester Holster
See page 54
Cleaning Wipes
Fluke T5 Voltage, Continuity
and Current Testers
• Excellent front-line troubleshooting
and measurement tool
• Available in 600 V and 1000 V models
• Digital display
• OpenJaw™ current measurement
• Rotary switch selects volts, amps
and ohms functions
• Heavy-duty test leads
Fluke T5-1000
Fluke VoltAlert™ Family
The next generation VoltAlert™ ac
non-contact voltage testers from Fluke
are easy to use. Electricians, maintenance, service and safety personnel,
and homeowners can quickly test for
energized circuits in the workplace or
at home. Certified up to CAT IV 1000 V.
Functions
T+PRO
T+
T5-1000
T5-600
1000 V
600 V
Preset 12 V, 24 V, 48 V, 120 V, 208 V,
240 V, 277 V (Canada 347 V), 480 V, 600 V
Measure ac current (average)
Measure continuity
Yes
Measure resistance
9.99 k1
Yes
100 A
100 A
< 25 1
< 25 1
1000 1
1000 1
Yes
Yes
Yes
DC polarity indicator
Detachable probe tips with
optional probe tips styles
Yes
Yes
Yes
Digital display
Yes
No
Yes
Yes
CAT IV 600 V/
CAT III 1000 V
CAT IV 600 V/
CAT III 1000 V
1000 V Overvoltage
CAT III
600 V Overvoltage
CAT III
Two-year
Two-year
Two-year
Two-year
Safety rating
Warranty
*Voltage levels will vary depending on country of intended use.
Functions
Voltage range
2AC
1AC-II
1LAC-II
LVD2
90 V ac to1000 V ac
90 V ac to1000 V ac
20 V ac to 90 V ac
90 V ac to 600 V ac
•
•
•
Always on
•
•
•
CAT IV 1000 V
CAT IV 1000 V
CAT IV 1000 V
CAT IV 600 V
Audible alert
Safety rating
Recommended kits
T+PRO-1AC Kit
• Fluke T+Pro Electrical Tester
• 1AC-II VoltAlert ™
• Fluke 62 Non-conta
Thermometer
• T+RO Electrical Tes
• 1AC-II VoltAlert™
• Carrying case
T5-1000 Tester Kit
• Fluke T5-1000 Voltage
Electrical Tester
• 2AC VoltAlert ™
Voltage Detector
• Fluke H5 Holster
•
Flashlight
On/Off
C520A
Premium Leather Holster
See page 54
62/T+PRO/1AC-II
Specifications
Measure ac/dc voltage
T5 Kit
Starter Kit
See page 55
VoltAlert ™ Multi Pack
Includes five Fluke VoltAlert ™ voltage detectors.
The special kit pricing gets you the fifth VoltAlert ™ free.
Ordering information
Included accessories
Models
The T+ and T+PRO come with attached
test probes, lead wrap, users manual.
T+PRO and T+PRO CAN
Electrical Tester
T+ and T+ CAN
Electrical Tester
T+PRO-1AC KIT
Electrical Tester and AC Voltage Detector Kit
T+PRO CAN-1AC KIT
Electrical Tester and AC Voltage Detector Kit
62-T+PRO-1AC KIT
IR Thermometer, Electrical Tester and AC Voltage
Detector Kit
T5-1000
1000 V Voltage, Continuity and Current Tester
T5-600
600 V Voltage, Continuity and Current Tester
T5-H5-1AC KIT
Voltage, Continuity and Current Tester Kit
The T5-1000 and T5-600 come with
detachable probes and instruction sheet.
2AC
VoltAlert ™ Voltage Detector
2AC 5PK
VoltAlert ™ Voltage Detector 5 Pack
1AC-II
VoltAlert ™ Voltage Detector
1AC-II 5PK
VoltAlert ™ Voltage Detector 5 Pack
1LAC-II
VoltAlert ™ Voltage Detector
LVD2
Volt Light
For more information, go to www.fluke.com/electricaltesters
Check price and availability at
www.fluke.com/wtb
Electrical Testers
21
Fluke 975 AirMeter™
Simple, one-touch air velocity
The Fluke 975 AirMeter ™ combines five powerful air
quality tools into one. Identify and diagnose indoor
air quality issues quickly and easily with one rugged,
handheld device. The Fluke 975 measures and simultaneously displays temperature, humidity, CO2 and CO. At
the press of a button, it quickly measures air flow and
percentage of outside air.
• Simultaneously measures, logs and displays
temperature, humidity, CO2 and CO on a bright,
backlit LCD display
• % of outside air calculation
• One-touch air flow and velocity with available
probe*
• Dew point and wet bulb temperature
• CO2 and CO field calibration feature
• Min/Max/Avg on all measured and calculated
readings
• Audible and visual threshold alarms
• Extensive discrete or continuous data logging
capacity, downloadable to PC via USB interface
• Includes NIST-traceable certificate of calibration
• Automatically compensates for barometric pressure
changes
• Two-year warranty
Recommended accessories
Fluke-975VP
AirMeter Velocity Probe for use with Fluke 975 AirMeter.
Recommended kits
Fluke-975CK
AirMeter Calibration Kit includes the gases and tools
necessary to keep your Fluke 975 AirMeter calibrated.
*Included with Fluke 975V, optional with Fluke 975.
Fluke 922 Airflow Meter/Micromanometer
Make airflow measurements easy by combining differential pressure, air
flow, and velocity into a single, rugged meter. Used with any pitot tube,
the Fluke 922 is the perfect entry point for technicians measuring air
flow for the first time, yet powerful enough for advanced users.
• Measures differential and static pressure, air velocity and flow
readings
• User-defined duct shape and size for maximum airflow accuracy
• Bright, backlit display
• Min/Max/Avg/Hold functions
• Auto power off
Fluke 975V
•
•
•
•
•
•
•
•
•
AirMeter™
Calibration cap
Air velocity probe
FlukeView® Forms software
Power adapter
International power plugs
Hard carrying case
Three AA alkaline batteries
Users manual with safety information
Specifications
975 features
Temperature
Relative humidity
Air velocity
Range
Display resolution
Accuracy
-20 °C to 50 °C
(-5 °F to 122 °F)
0.1 °C (0.1 °F)
± 0.9 °C/± 1.62 °F from 40 °C to 60 °C ± 0.5 °C/
± 1.00 °F from 5 °C to 40 °C ± 1.1 °C/± 1.98 °F
from -20 °C to 5 °C
10 % to 90 % RH
non-condensing
1%
± 2 % RH (10 % RH to 90 % RH)
50.0 fpm to 3000 fpm
0.25 m/sec to 15 m/sec
1 fpm (0.005 m/sec)
± 4 % or 4 fpm* ± 4 % or 0.02 m/sec* whichever is
greater * Accuracy specification only valid for velocity
readings above 50 fpm
0 to 5000 ppm
1 ppm
Warm up time 1 min (5 minutes for full specification)
2.75 % + 75 ppm
0 to 500 ppm
1 ppm
± 5 % or ± 3 ppm, whichever is greater,
@ 20 °C and 50 % RH
CO2
CO
922 features
Air pressure
Range
Accuracy
± 4000 Pascals / ± 16 in H2O / ± 400 mm H2O /
± 40 mbar / ± 0.6 PSI
± 1 % + 1 Pascal / ± 1 % + 0.01 in H2O /
± 1 % + 0.1 mm H2O / ± 1 % + 0.01 mbar /
± 1 % + 0.0001 PSI
Air velocity
Air flow (volume)
250 to16,000 fpm (1 to 80 m/s)
± 2.5 % of reading at 2000 fpm (10.00 m/s)
0 to 99,999 cfm; 0 to 99,999 m 3/hr; 0 to 99,999 l/s
Accuracy is a function of velocity and duct size
0 °C to 50 °C (32 °F to 122 °F)
0.1 °C (0.1 °F)
Temperature
Data storage
Warranty
Power
Fluke 922/Kit
•
•
•
•
•
•
•
•
•
Airflow meter
12 inch pitot tube
Two rubber hoses
TPak magnetic strip
TPak strap, 9 inches
TPak latch tab
Four AA 1.5 V alkaline batteries
Users manual
Hard carrying case
99 readings
Two-year
Four AA batteries
Ordering information
22
Included accessories
Models
Calibration cap, air velocity probe (Fluke 975V only), FlukeView ® Forms
software, power adapter, international power plugs, hard carrying case,
three AA alkaline batteries, users manual with safety information.
FLUKE-975
AirMeter™
FLUKE-975V
AirMeter™ with Velocity
Two rubber hoses, soft carrying case, four AA alkaline batteries 1.5 V,
users manual.
FLUKE-922
Airflow Meter
12 inch pitot tube, two rubber hoses, ToolPak Magnetic Meter Hanging Kit,
hard carrying case, four AA alkaline batteries 1.5 V, users manual.
FLUKE-922/KIT
Airflow Meter Kit
Indoor Air Quality
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/IAQ
Indoor Air Quality Tools
Tools to help you maintain good IAQ
Fluke 971 Temperature Humidity Meter
Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. Quickly
and conveniently take accurate humidity and temperature readings with the Fluke 971. The Fluke 971 is invaluable for facility
maintenance and utility technicians, HVAC-service contractors,
and specialists who assess indoor air quality (IAQ). Lightweight
and easy to hold, the Fluke 971 is the perfect tool for monitoring
problem areas. With a rugged holster and twist-open protective
sensor cover, the Fluke 971 is built to perform and made to last.
Features:
• New and improved digital sensor for faster response times
• Backlit dual display of humidity and temperature
• Measures dew point and wet bulb temperatures
• 99 record storage capacity
• Ergonomic design with belt clip and protective holster
• Compact and lightweight at 188 g (6.6 oz)
• Temperature range from -20 °C to 60 °C (-4 °F to 140 °F)
• Relative humidity from 5 % to 95 %
• Min/Max/Avg/Hold functions
• Low battery indicator
• One-year warranty
Fluke 983 Particle Counter
The Fluke 983 Particle Counter measures and displays
six channels of particle size distribution. The Fluke 983
holds 5000 logged samples including date, time, counts,
sample volume, temperature and relative humidity.
Data is easily downloaded using the included windows
compatible utility software. The Fluke 983 is invaluable for IAQ investigations, allowing you to determine
size distribution of airborne particles or track down a
particle source.
Features:
• Compact and easy to operate
• Graphic liquid crystal display with backlight
• Simple connection to computer or printer
• Selectable sample time, count data and programmable
delay
• Set sample size to cubic feet or liters, set temperature
measurements to °C or °F
• Data displayed in totalize or concentration modes
• Automatic turn-off when battery voltage drops below
safe operating level
• Meets JISB9921:1997 and CE standards
• Battery or ac operation with internal rechargeable
battery
• Protective holster
• Rugged, hard shell carrying case
• One-year warranty
Ordering information
Included accessories
Models
Certificate of Calibration (NIST), Windows compatible software
download utility, DB9 to RS-232 adapter and cable, isokinetic
probe, high purity tubing, 1/8 inch hose barb adapter, power
supply, zero count filter, protective holster and hard molded
plastic case, users manual.
FLUKE-983
Particle Counter
Four AAA alkaline batteries, users manual.
FLUKE-971
Temperature Humidity Meter
FLUKE-983TPK 220
Thermal Printer Kit, 220 V
FLUKE-983TPK 120
Thermal Printer Kit, 120 V
FLUKE-CO-205
Aspirator Kit
FLUKE-CO-220
Carbon Monoxide Meter
FLUKE-RLD2
Refrigerant Leak Detector Flashlight
For more information, go to www.fluke.com/IAQ
Specialty models
Fluke RLD2 UV Refrigerant
Leak Detector Flashlight
Leak detection made
easy. The compact,
easy-to-use, RLD2
UV flashlight uncovers refrigerant leaks
instantly. Use the UV
light to find the leakage area, then, use the
laser pointer to pinpoint
the exact leak location.
With 100,000 hours of
life, and four operating
modes, this versatile
leak detector is a must
have for HVAC technicians.
• Six UV LEDs (395 nm wavelength)
detect leak detection dyes
• Laser pointer clearly locates center
of the UV field for accuracy
• Three LED flashlight with 100,000
hour LED life
• Operating temperature 0 °C to 50 °C
• Four operating modes: flashlight,
UV light, laser light, UV/laser light
combination
• Convenient detachable key chain
carabiner and AAA battery included
CO-220 Carbon
Monoxide Meter
• Stand-alone CO meter
that does not require a
digital multimeter
• Large backlit LCD displays CO levels from 0 to
1000 ppm
• Beeper triggers with
increasing frequency as
CO levels rise
• MAX hold function
stores and displays the
maximum CO level
• Automatic sensor zeroing and self-test upon
startup
CO-205 Aspirator Kit
The CO-205 flue gas sampling
accessory kit includes:
• Stainless steel sampling tube
• Aspirator
• Replaceab
filter
• Nose cap
connectio
the Fluke
CO-210/CO-220
Check price and availability at
www.fluke.com/wtb
Indoor Air Quality
23
Fluke 1507/1503 Insulation Resistance Testers
Troubleshooting and predictive maintenance tools
These lightweight, affordable insulation testers are perfect
for troubleshooting, commissioning and preventive maintenance applications.
Features
• Automatic calculation of polarization index and dialectric absorption ratio (1507 only)
• Multiple test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
(1507 only)
• Remote test probe for rapid testing
• Insulation test range 0.01 MΩ to 10 GΩ (1507), 0.1 MΩ to
2000 MΩ (1503)
• Compare (Pass/Fail) function for repetitive tests
(1507 only)
• Live circuit detection prevents insulation test if voltage
> 30 V is detected
• Auto-discharge of capacitive voltage
• AC/DC voltage: 0.1 V to 600 V
• Lo ohms/Earth-bond continuity (200 mA) for checking
connections and motor windings
• Resistance: 0.01 Ω to 20.00 Ω
• One-year warranty
Selection guide
Features
1555
1550C
Insulation test voltages 50 V,
100 V, 250 V, 500 V, 1000 V
1507
•
Insulation test voltages
500 V, 1000 V
Insulation resistance
Auto-discharge of capacitive
voltage
1577
•
•
•
•
2 TΩ
1 TΩ
0.01 MΩ to
10 GΩ
0.1 MΩ to
2 GΩ
0.01 MΩ to
2.0 GΩ
0.1 MΩ to
600 MΩ
•
•
•
•
•
•
Insulation test smoothing
reading
Current measurement
• Automatic ranging within the
manually selected mA or A range
• Ranges 3/30 mA and 30/60 A
• Current resolution 1 µA/0.01 mA
and 0.01 A/0.1 A
• Frequency range 50 and 60 Hz
• Jaw size: 40 mm (1.55 in) maximum
conductor diameter
• Auto power off
•
•
•
Recommended accessories
•
Diode test
•
Temperature
•
Min/Max
•
Low-pass filter (for work
on VSDs)
•
AC/DC voltage
•
•
DC millivolts
•
•
AC/DC milliamps
•
•
0.1 Ω to
50 MΩ
Resistance
0.1 Ω to
20.00 KΩ
0.1 Ω to
20.00 KΩ
0.1 Ω to
50 MΩ
•
•
Warranty (years)
3
3
1
1
3
3
Remote probe, test leads,
alligator clips
•
•
•
•
•
•
Continuity
TPAK
TL225
Magnetic Meter Hanger
See page 62
Stray Voltage Adapter
Test Lead Kit
•
Type K thermocouple
Rugged, utility hard case
•
•
•
•
•
Auto power off
•
•
•
•
•
•
25
25
24
24
17
17
Page number
Calculate insulation resistance while
equipment is under load by measuring insulation leakage
current. The unique
jaw design of the Fluke
360 eliminates the
influence of adjacent
current conductors and
measures leakage current down to 1 μA for
monitoring of insulation. The ergonomic
design of the Fluke 360
ensures easy measuring. The measuring
clamp fits into tight
spaces and the wide
display angle clearly
shows the measurement result. The Data Hold button
keeps the measured value on the
display after removing the clamp for
the measured conductor.
The Fluke 360 offers the widest
range of current measurement. Use
the rugged Fluke 360 when it’s not
possible to power down and break the
circuit.
•
Frequency
Capacitance
1587
•
Insulation test voltages: User
selectable 250 V to 5000 V
Insulation test voltages: User
selectable 250 V to 10,000 V
1503
Specialty models
Fluke 360 AC Leakage
Current Clamp Meter
•
C25
C101
Meter Case
See page 54
Hard Case
See page 54
Ordering information
Included accessories
Models
Remote probe, test leads, test
probes, alligator clips, holster,
users manual.
FLUKE-1507
Insulation Tester
FLUKE-1503
Insulation Tester
FLUKE-360
AC Leakage Current Clamp Meter
Soft carrying pouch,
users manual.
24
Insulation Resistance Testing
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/1507
1555 and 1550C Insulation
Resistance Testers
Powerful troubleshooting and
predictive maintenance tools
The new Fluke 1555 and redesigned Fluke
1550C insulation resistance testers offer
digital insulation testing up to 10 kV, making them ideal for testing a wide range of
high voltage equipment including switchgear,
motors, generators and cables.
• Test voltages up to 5 kV (1550C) and
10 kV (1555) provide solutions for all
applications
• Warning function alerts the user that line
voltage is present and gives a voltage
reading up to 600 V ac or dc for increased
user safety
• Measurements can be stored in up to 99
memory locations, and each location is
assigned a unique, user-defined label for
easy recall
• Long battery life gives the user over 750
tests between changes
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with
no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance
measurements
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current
measurement
• Ramp function for breakdown testing
• Three-year warranty
Application note
Insulation resistance testing
Insulation
resistance
testers can
be used to
determine
the integrity
of windings
or cables
in motors,
transformers,
switch-gear,
and electrical
installations.
The test
method is
determined by the type of equipment being tested and the reason for
testing. For instance, when testing electrical cabling or switchgear
(low-capacitance equipment) the
time-dependent capacitive leakage and absorption leakage currents
become insignificant and decrease
to zero almost instantly. A steady
conductive leakage current flow is
reached almost instantly (a minute or
less) providing perfect conditions for
the spot-reading/short-time resistance test.
www.fluke.com/IRT
Specifications
The tester’s accuracy is specified for one year after calibration at operating temperatures of 0 °C to 35 °C. For operating temperatures outside the range (-20 °C to 0 °C and 35 °C to 50 °C), add ± .25 % per °C, except on the 20 % bands add ± 1 % per °C.
Insulation resistance measurement
Recommended kits
1550C/Kit includes:
Test voltage (dc)
Range
Accuracy (± reading)
250 V
< 200 kΩ
200 kΩ to 5 GΩ
5 GΩ to 50 GΩ
> 50 GΩ
unspecified
5%
20 %
unspecified
500 V
< 200 kΩ
200 kΩ to 10 GΩ
10 GΩ to 100 GΩ
> 100 GΩ
unspecified
5%
20 %
unspecified
1000 V
< 200 kΩ
200 kΩ to 20 GΩ
20 GΩ to 200 GΩ
> 200 GΩ
unspecified
5%
20 %
unspecified
2500 V
< 200 kΩ
200 kΩ to 50 GΩ
50 GΩ to 500 GΩ
> 500 GΩ
unspecified
5%
20 %
unspecified
5000 V
< 200 kΩ
200 kΩ to 100 GΩ
100 GΩ to 1 TΩ
> 1 TΩ
unspecified
5%
20 %
unspecified
10000 V (1555 Only)
< 200 kΩ
200 kΩ to 200 GΩ
200 GΩ to 2 TΩ
> 2 TΩ
unspecified
5%
20 %
unspecified
Accuracy (± reading)
Functions
Range
Leakage current
1 nA to 2 mA
± (5 % + 2 nA)
Capacitance measurement
0.01 uF to 15.00 µF
± (15 % rdg + 0.03 µF)
Live circuit indicator
30 V to 600 V ac/dc, 50/60 Hz
± (5 % + 2 V)
•
•
•
•
1550C insulation resistance tester
Ruggedized alligator clips
IP67 hard case
NIST traceable certificate of calibration
1555/Kit includes:
•
•
•
•
1555 insulation resistance tester
Ruggedized alligator clips
IP67 hard case
NIST traceable certificate of calibration
Ordering information
Included accessories
Models
Test leads with alligator clips, ruggedized alligator clips
(kits and 1555 only), infrared adapter with interface
cable, FlukeView Forms software, ac power cord, soft
carrying case, quick reference guide, users manual.
FLUKE-1550C
5 kV Insulation Tester
FLUKE-1550C/Kit
5 kV Insulation Tester Kit
FLUKE-1555
10 kV Insulation Tester
FLUKE-1555/Kit
10 kV Insulation Tester Kit
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/1550
Insulation Resistance Testing
25
Fluke 345 Power Quality Clamp Meter
The ideal meter to troubleshoot modern electrical loads
The Fluke 345 is more than a power meter. Combining the
functions of a clamp meter, oscilloscope, data logger and digital
power meter into one handy device, the Fluke 345 is ideal for
working with variable frequency motor drives, high efficiency
lighting and other loads using switching electronics.
• AC/DC current: Clamp-on measurement of ac current up to
1400 A rms and dc current up to 2000 A without breaking the
circuit
• Highest safety rating: 600 V CAT IV power analyzer is rated
for use at the service entrance
• Accurate in noisy environments: Clamp meter performs even
with distorted waveforms present on electronic loads with
low-pass filter
• Data logging: Identify intermittent faults by logging any
power quality parameter for minutes, or over a month, including harmonics
• Verify batteries: Direct measurement of dc ripple (%) for battery and dc systems
• Troubleshoot harmonics: Analyze and log harmonics digitally
or graphically
• Inrush current: Capture and analyze nuisance tripping, from 3
seconds to 300 seconds
• Easy to use: Easily confirm power meter setup with large
backlit color display of waveforms and trends
• View graphs and generate reports: Use power analyzer with
included Power Log software
Application tip
Set up and troubleshoot variable
frequency drives and UPS systems –
Verify correct operation by measuring
key parameters
Harmonics measurements – Uncover
harmonic issues that can damage or
disrupt critical equipment
Inrush capture – Check start-up current where spurious resets or nuisance
circuit breaker tripping occurs
Load studies – Verify electrical system
capacitybefore adding loads
View waveforms for equipment checking and setup.
Selection guide
Single Phase
Basic measurements
Application use
VR1710
Three Phase
345
43B
1735
1740
430
1750
1760
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Energy studies
Measure V, I, kW, Cos/
DPF, kWhr
Measure MIN/MAX and
AVG values
10 day logging
Get detailed power and
energy consumption
profiles during energy
audits and pinpoint
savings opportunities.
Basic harmonics study
THD measurement
(V & I)
Harmonics 1 to 25
for V & I
Discover the source
of distortion in your
installation, so that you
can filter those loads or
move them to separate
circuits.
Equipment performance measurement—power consumed
by single- and three-phase balanced loads.
Advanced harmonics study
Full harmonic spectrum
Power harmonics
If distorting loads are
causing problems in
your installation, you
need comprehensive
data to identify the
source and create a
solution.
Recommended accessories
Basic industrial PQ troubleshooting*
Oscilloscope function
When troubleshooting
Voltage dips and swells in the field, graphical
data enables you to
trace the source of the
problem at hand.
•
Advanced industrial PQ troubleshooting**
Comprehensive logging
capability
Transient capture
Flicker
Complex installations
often require a deeper
dive into measurement
data. Multiple loads
may be interacting
randomly to cause a
single problem.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TP220
AC220
Industrial Test Probes
See page 57
Alligator Clips
See page 57
For more information and detailed product selector go to:
http://www.fluke.com/fluke/usen/products/prodselection?product=pqt&category=pqttop
Ordering information
Included accessories
Models
Test leads, alligator clips, test probes, Power Log software, USB
cable, international ac adapter/battery eliminator, soft carrying
case, users manual, multi-language manual CD.
FLUKE-345
TLK291
C550
Fused Test Probe Set
Tool Bag
See page 54
Clamp-On Power Meter
Check price and availability at
www.fluke.com/wtb
26
Power Quality Analyzers
For more information, go to www.fluke.com/pq
Fluke 430 Series Three-Phase
Power Quality Analyzers
Pinpoint power problems faster, safer and
in greater detail
The Fluke 435 and 434 Three-Phase Power Quality Analyzers help you locate, predict, prevent and
troubleshoot problems in three- and single-phase power
distribution systems. Troubleshooting is faster with
on-screen display of trends and captured events, even
while background recording continues.
• Logged data analysis: PowerLog software provide
download, analysis reporting in minutes
• AutoTrend: Every measurement you see is always
automatically recorded, without any setup
• Automatic Transient Mode: Capture 200 kHz waveform data on all phases simultaneously up to 6 kV
• Fully Class-A compliant: Conduct tests according to
the stringent international IEC 61000-4-30 Class-A
standard
• Inrush mode: For troubleshooting nuisance circuit
breaker tripping
• Logger function: Configure for any test condition
with memory for over 400 parameters at user defined
intervals
Recommended accessories
I5sPQ3
i430-flex-4pk
3 pack of 5 A precision
current clamps
4 pack of 3000 A
flexible current probes
C435
GPS430
Water-tight hard
case with rollers
GPS time
synchronization module
Resources
More PQ info online at
www.fluke.com/pq
Get a free PQ training DVD
www.fluke.com/PQ-DVD
Sign up for a PQ seminar
www/fluke.com/FPQseminar
• Troubleshoot real-time:
Analyze the trends
using the cursors and
zoom tools—even while
background recording
continues
• Measure all three
phases and neutral:
With included four current probes
• System-Monitor:
Up to ten power quality parameters on one
screen according to
EN50160 power quality
standard
What’s included
Features
Features
435
434*
Measures voltage, current, dips, swells,
interruptions, harmonics, inter-harmonics, flicker,
power, energy, transients, frequency, unbalance,
inrush, EN50160 overview
•
•
Logger function with multi-parameter logging
•
Optional*
Mains signaling
•
Optional*
16 MB
8 MB
Current probes
3000 A flexible (4)
40 A/400 A clamp (4)
Carrying case
Water-tight hard case with rollers
Rugged hard case
Software
Fluke Power Log and FlukeView®
FlukeView®
•
•
Memory size
Three-year warranty
Fluke 435
*Optional functionality can be added with upgrade kit.
Ordering information
(basic versions do not include current probes)
Included accessories
Models
Four flexible current probes (i430 Flex), five test leads and
clips, battery charger, FlukeView software, Power Log software,
optical USB cable, color localization set, hard carrying case with
rollers, getting started manual, users manual on CD.
FLUKE-435
Three-Phase Power Quality Analyzer
Four current probes (i400s), five test leads and clips, battery
charger, FlukeView software, optical USB cable, color
localization set, hard carrying case, getting started manual,
users manual on CD.
FLUKE-434
Three-Phase Power Quality Analyzer
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/pq
Power Quality Analyzers
27
Fluke 43B Power Quality Analyzer
Power quality analysis plus a scope and a meter
Fluke 43B Power Quality Analyzer performs the
surements you need to maintain power systems,
bleshoot power problems, and diagnose equipment
ures. The 43B has 20 storage locations and can store
as well as screens.
asic measurements: Voltage, current, and power
armonics up to 51st, THD
scillioscope function: View voltage and current
waveforms
ransients: Capture up to 40 voltage transients and
waveform events
etailed event capture: Cursors give time and date of
ags and swells
lukeView® software: Analysis and reporting, supplied
with USB connection lead
attery operated: 6.5 hours of operation from NiMH
attery
Warranty: Three-years for analyzer, one-year for
ccessories
Application tip
The high speed oscilloscope
capability is particular useful
for service and commission of
electronic switching loads.
The wide band scope can display the
details of PWM drives waveforms.
Fluke Norma 4000 and 5000
Precision Power Analyzers
Fluke Norma 4000 and 5000 are ideal
for field and laboratory testing
Fluke Norma 4000
Fluke Norma Analyzers offer easy and straight-forward operation with unmatched price performance.
Features include: 1 to 6 power phases, 5.7 in/144
mm color display, harmonic analysis, scope mode,
vector diagram display, recorder function, Fluke
NormaView PC software and 4 MB RAM data
memory.
• Choose the right model for your application: a variety of standard configurations
allows users to choose the exact functionality required for their unique application
• Electrical measurement integrity and safety: inputs are galvanically isolated to
avoid short circuits in all applications and simultaneous parallel acquisition of all
phases allows accurate viewing of dynamic events dc to 3 MHz/10 MHz bandwidth for
reliable measurement precision
• Voltage, current and power harmonics FFT analysis: to the 40th harmonic, vector
diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete
analysis capability
• Complete electrical and mechanical analysis: PI1 process interface to measure
torque and speed with external sensors,
plus four analog outputs for easy use on
motor and drive applications
• Data download, analysis and report
writing with: supplied Fluke NormaView PC software
The inrush screen shows the effects of
load start up.
Recommended accessories
i2000 FLEX
32 A
AC Current Clamp
See page 60
Planar Shunt
(Norma 4000/5000)
i5s
100 A
AC Current Clamp
Shunt with Cables
(Norma 4000/5000)
Fluke Norma 5000
Ordering information
28
(basic versions do not include current probes)
Included accessories
Models
Voltage and current probes, FlukeView® software, power quality
instructional CD, USB interface cable, line voltage adapter/
battery charger, hard case, users manuals.
FLUKE-43B
Power Quality Analyzer
Power supply cable, NormaView PC software, test certificate,
calibration values, users manual.
Norma 4000
High Precision Power Analyzer
Norma 5000
High Precision Power Analyzer
Power Quality Analyzers
80TK
150 A
Thermocouple Module
See page 59
Shunt with Cables
(Norma 4000/5000)
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/pq
Fluke 1735 Three-Phase Power Logger
General power quality logging
•
•
•
•
The Fluke 1735 Three-Phase Power Logger
is the ideal electrician or technician’s tool
for conducting energy studies and basic
power quality logging. Set up the 1735 in
seconds, with the included flexible current
probes and color display. The 1735 logs
most electrical power parameters and harmonics and captures voltage events.
• Ideal for field operation: Compact,
rugged instrument; easy to use, quickly
confirm instrument setup with color
display of waveforms and trends
• Full system electrical measurement
capability: Three phases and neutral
with included four flexible current
probes
Prove the benefit of efficiency improvements: Record power and
associated parameters for up to 45 days. Monitor maximum power
demand over user-defined averaging periods
Check the power quality effects energy saving devices: Measure
harmonics and distortion caused by loads and improve reliability
by capturing voltage dips and swells from load switching
Easy PC connectivity and operation: USB interface for plug and
play operation; download, view graphs and automatically generate
reports with included Power Log software
Reliable operation: Two-year warranty
Fluke VR1710
Power Quality Recorder
Application tip
The Fluke 1735 provides the important
data for electrical energy surveys.
Detailed power information enables load balancing.
Supplied PowerLog software enables detailed energy
analysis.
Detect and record voltage quality problems
• Fast and easy recording of voltage trends, dropouts,
and power quality: easily pinpoint the root cause of
single phase voltage problems
• Extremely easy to use: plugs directly into the mains
power socket and capture data
• Continuous recording of all values with no gaps:
save testing time by getting the whole picture with one
instrument that records both events and voltage
• Clear graphical summary of data and quick overview
of key power quality parameters: Take the guesswork
out of diagnosing voltage quality problems
• Quickly see what happened and when: Min, Max,
and Average RMS values (1/4 cycle) with time stamp,
transient display (>100 μs) with time stamp
• Easily identify problems: Power quality or equipment
related Flicker recording to EN 61000-4-15, individual
harmonic and THD values with trends
• Statistical analysis of single phase voltage events:
Reduces analysis time by tracking event quantities and
magnitudes
• Includes PowerLog software: For quick download,
analysis, and automatic reporting
• Save time: Generate power quality reports automatically with pre-set templates
• New: Transient sensitivity setting
What’s included
Fluke 1735
Fluke VR1710
Check fluke.com support area for firmware and software upgrades for Fluke power quality products.
Ordering information
Included accessories
Models
Four flexible current probes (15 A/150 A/3000 A), Power Log software,
voltage leads and clips, color localization set, PC interface cable,
international ac adapter (115 V/230 V, 50 Hz/60 Hz), soft carrying case,
users manual and multi-language manual CD.
FLUKE-1735
USB cable, Power Log software CD, universal power cord adapters.
FLUKE-VR1710
For more information, go to www.fluke.com/pq
Three-Phase Power Logger
Voltage Quality Recorder
Check price and availability at
www.fluke.com/wtb
Power Quality Analyzers
29
Fluke 1750 Three-Phase Power Recorder
Never miss capturing a disturbance
• Power quality that meets the standard: All
measurements comply with IEC61000-4-30
standards for correct evaluation of all measured values including voltage, current, power,
harmonics, flicker etc.
• Quick and reliable configuration: PDA
wireless “front panel interface” provides a
window into what the instrument is recording,
enabling quick and reliable configuration even
in awkward test locations
• Threshold-free set up: Apply thresholds after
data is collected with Fluke Power Analyze
Software—no need to worry about missed
information due to incorrect setups
• Captures everything: Cross-channel and current triggering capture every measurement, on
every channel, every time
• Intuitive PC software: Easily analyze data
and generate reports with automated EN50160
reporting and compliance
• Measure every parameter: Voltage and current on three phases, neutral, and ground
Fluke 1740 Series Three-Phase
PQ Loggers Memobox
1743
The Fluke 1740 Series Three-Phase Power Quality Loggers
are instruments for technicians who troubleshoot and analyze power distribution systems. The included PQ Log software quickly assesses the quality of power at the service
entrance, substation, or at the load, according to the latest
EN50160 standard.
• Plug and play: Setup in minutes with automatic current
probe detection and powering
• Installs inside the cabinet: Compact, fully-insulated
housing and accessories fit easily in tight spaces, next
to live power
• Determines the root cause: Included PQ Log software
quickly analyzes trends, creates statistical summaries,
and generates detailed graphs and tables
• Measure voltage with premium accuracy: IEC610004-30 Class-A compliant voltage accuracy (0.1 %)
What’s included
Fluke 1750
Sample PDA screens
Configurations are
simple with wiring
diagrams to guide you.
View measurements
real-time with
wireless PDA interface.
Online resources
Learn how to do what
you need to do, using
Fluke power quality tools.
Specifications
Features
1743/1744
1745
1750
Measures common power parameters: V, A, W, VA,
VAR, PF, energy, flicker, voltage events, and THD
•
•
•
Measures voltage and current harmonics to the
50th, unbalance, and mains signaling
•
•
•
Transient capture
•
PDA support
•
Go to:
www.fluke.com/pqtraining
ng
Product demo:
www.fluke.com/1750
GPS clock synchronization
UPS ride through
Dimensions
3s
>5 hours
5 min per interruption,
60 min total
170 mm x 125 mm x 55 mm 282 mm x 216 mm x 74 mm 215 mm x 310 mm x 35 mm
(6.9 in x 5.1 in x 2.2 in)
(11.5 in x 8.8 in x 3 in)
(8.5 in x 12.2 in x 3.5 in)
Weight (approx.)
0.9 kg (2 lb)
1.4 kg (3 lb)
6.3 kg (14 lb)
Ordering information
Included accessories
Models
Acquisition unit, PDA and charger, power plug adapters, four 400 A
current probes, five test leads and clips, SD memory card, Fluke Power
View and Fluke Power Analyze software, power cord with international
plug set, ethernet cable, color localization set, users manual and CD.
FLUKE-1750
Three-Phase Power Recorder
Four flexible probes 15/ 150/1500/3000 A with 2 m cable, PQ Log
software, RS-232 interface cable and USB adapter, four dolphin clips, test
leads for voltages and power supply, color localization kit, carrying bag,
test certificate with measurement values, users manual, multi-language
manual CD.
FLUKE-1745
Power Quality Logger – Memobox
FLUKE-1744
Power Quality Logger – Memobox
FLUKE-1743
Power Quality Logger – Memobox
Power Quality Analyzers
Application notes:
www.fluke.com/pqappnotes
Hands-on seminars:
www.fluke.com/pqtrngseminars
In the U.S., these power quality recorders are sold exclusively through power quality representatives. To request a
demonstration, or to order, call 1-888-257-9897 or email questions to [email protected]
30
Online training:
www.fluke.com/pqonlinetraining
Product information:
www.fluke.com/pqproducts
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/pq
Pick the right process tool for you
Process Tools Selection Guide
Models
Loop Calibrator
Pressure
Calibrator
Temperature
Calibrator
Precision
Multifunction
Process
Calibrator
Intrinsically
Safe
Calibrator
Documenting
Process
Calibrator
789
715
719
724
726
725Ex
744
1000 V
25 V
30 V
30 V
30 V
300 V
3200 1
4000 1
3200 1
11 k1
24 mA
24 mA
24 mA
110 mA
15 kHz
10 kHz
50 kHz
•1
•5
•1
Process mA
Clamp Meter
ProcessMeter®
Test Tool
773
30 V
Measure
V dc
V ac (true-rms)
1000 V
Resistance
40 M1
A dc
20.99, 99.9 mA
30 mA, 1 A
300 V
24 mA
24 mA
•
A ac
Frequency
20 kHz
Pressure
1 psi, 30 psi,
100 psi and
300 psi2
Temperature: RTDs
7 types
8 types
7 types
8 types
Temperature: TCs
12 types
13 types
12 types
13 types
Source/Simulate
V dc
10 V
20 V
Resistance
mA dc
mA source; auto step,
auto ramp
24 mA
24 mA
24 mA
24 mA
•
•
•
•
10 V
20 V
10 V
15 V
3200 1
4000 1
3200 1
11 k1
24 mA
24 mA
22 mA
Frequency
•
•
•
15 kHz
10 kHz
50 kHz
Temperature: RTDs
7 types
8 types
7 types
8 types
Temperature: TCs
12 types
13 types
12 types
13 types
Record
Min/Max
Hold
•
•
•
•
•
•
•
As found/As left results
•
Log data
•
•
Upload data to PC
•
Remote operation
•
Features
24 V loop supply
•
Non-contact mA
measurement
•
•
•
•
•
•
12 V
•
HART communication
Integrated hand pressure
pump
Electric
•
Intrinsically safe (ATEX)
Warranty
Three-year
Three-year
Three-year
•
•
A/B
A/B
C
•
•
•
33
34
38
37
36
39
35
NIST traceable
certification
Accessories3
Pressure enabled4
See page
•
One-year
Three-year
Three-year
Three-year
Three-year
•
•
•
•
A/B
A/B
•
32
1Fluke
700 Pressure Modules required.
the internal sensor or a Fluke 700 Pressure Module may be used.
3Accessories: A. Compatible with LockPak B. Compatible with TPAK C. Accepts hanging straps from TPAK D. Optional accessories.
4Fluke Process Calibrators in this guide displaying the Pressure Enabled symbol display readings from the 700 Series Pressure Modules.
5Fluke 700PEx Pressure Module required.
2Either
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/processtools
Process Calibration Tools
31
Fluke 771, 772 and 773
mA Process Clamp Meters
Use the Fluke 771, 772
and 773 to:
• Measure 4-20 mA signals without ”breaking the loop,” save
time and money troubleshooting 4-20 mA signals
Use the Fluke 772 and
773 to:
Fluke 771
Fluke 772
• Source 4-20 mA signals for
testing control system I/O or
I/Ps
• Simulate 4-20 mA signals for
testing control system I/O
• Measure 4-20 mA signals with
in-circuit measurement
• Power a transmitter with the
24 V loop power supply
• Automatically ramp and step
change the 4-20 mA output for
remote testing
Fluke 773
Resources
More info online at
www.fluke.com/processtools
Check out the 773 video at
www.fluke.com/773
ROI calculator:
www.fluke.com/77X_ROI
Use the Fluke 773 to:
N10140
• DC voltage measurement to verify 24 V power supplies
or voltage I/O signals
• Source dc voltage to test voltage input devices
• Scaled mA output signal enables a logging DMM (289) to
record 4-20 mA signal without breaking the loop
• mA in/out: simultaneously source a mA signal while
measuring a mA signal with the clamp
All the information you need at
www.fluke.com/processsolutions
Features
mA
measure
In circuit
mA source
mA sim
Loop
power
24 V
771
mA
measure
w/jaw
•
772
•
•
•
•
•
773
•
•
•
•
•
DCV
source
0-10 V
DCV
measure
0-30 V
Scaled mA
output to
mA input
mA in/out
•
•
•
•
Specifications
Function
Resolution and range
Accuracy
Notes
0 to 20.99 mA
0.2 % + 5 counts
Measured by clamp
21.0 mA to 100.0 mA
1 % + 5 counts
0 to 24.00 mA
0.2 % + 2 counts
Measured in series with test jacks
mA source
0 to 24.00 mA
0.2 % + 2 counts
Maximum mA drive: 24 mA into
1,000 ohms
772 and 773
mA simulate
0 to 24.00 mA
0.2 % + 2 counts
Maximum voltage 50 V dc
773
Voltage source
0 to 10.00 V dc
0.2 % + 2 counts
2 mA maximum drive current
773
Voltage measure
0 to 30.00 V dc
0.2 % + 2 counts
771, 772, 773
mA measurement
772 and 773
mA measurement
772 and 773
General specifications
Battery
771
772
2 1.5 V, Alkaline, IEC LR6
773
20 hours typical
12 hours @ 12 mA source into 500 ohms
41.3 mm x 76 mm x 248 mm (1.625 in x 3 in x 9.75 in)
Weight
260 g (9.1 oz)
415 g (14 oz)
Operating temperature
-10 °C to 50 ºC
Size (HxWxL)
With the 77X family of millamp clamp
meters you can measure 4 to 20 mA
I/O signals without “breaking the
loop”. Once a bad signal is found the
sourcing functions of the 772 and 773
can be used to further troubleshoot
the loop.
4
59 mm x 38 mm x 212 mm
(2.32 in x 1.5 in x 8.35 in)
Working hours
Application tip
IP rating
IP 40
Warranty
Three-year, one-year on mA clamp assembly and cable
Ordering information
32
Included accessories
Models
Soft carrying case, users
manual.
FLUKE-771
Milliamp Process Clamp Meter
Test leads, alligator clips and
hanging strap, soft carrying
case, users manual.
FLUKE-772
Milliamp Process Clamp Meter
FLUKE-773
Milliamp Process Clamp Meter
Process Calibration Tools
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/771
Fluke 789 and 787
ProcessMeter ™ Test Tools
Fluke 789 ProcessMeter
With the Fluke 789 ProcessMeter, process technicians
an do a lot more while carrying a lot less.
24 V loop power supply
HART mode setting with loop power
(adds 250 ohm resistor)
Double-sized, dual display
20 mA drive into 1200 ohms
Backlight with two brightness settings
0 % to 100 % mA Span Check buttons to toggle
between 4-20 mA
Infrared I/O serial port compatible with
FlukeView® Forms Software
Improved battery power with four AA batteries
Plus all the proven 787 features
Simultaneous mA and % of
scale readout on mA output
25 % Manual Step plus Auto
Step and Auto Ramp on mA
output
Min/Max/Average/Hold/
Relative modes
Externally accessible battery
for easy changes
IEC 1010-1
600V
CAT IV
Check out our latest videos at
www.fluke.com/ptoolsvideos
Increase your skills at
www/fluke.com/processtraining
Fluke 787 ProcessMeter
Designed and
Conforms to
Resources
More info online at
www.fluke.com/processtools
All the information you need at
www.fluke.com/processsolutions
True
RMS
(Fluke 789 only)
Fluke 787
Specifications
Recommended accessories
Measurement function
Best accuracy range and resolution
(% of reading + LSD)
V dc
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
0.1 % + 1
V dc (true-rms)
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
0.7 % + 2
mA dc
30.000 mA
.05 % + 2
A dc
1.000 A (0.440 A continuous)
0.2 % + 2
A ac
1.000 A (0.440 A continuous)
Resistance
400.0 1, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M
1%+2
Frequency (0.5 Hz to 20 kHz)
199.99 Hz, 1999.9 Hz, 19.999 kHz
Diode test
789: 2.000 V (shows diode voltage drop) 787: 2.400 V
(shows diode voltage drop)
Continuity
Beeps for resistance < approx. 100 ohms
Output function
Range and resolution
DC current output (internal
battery operation)
0.2 % + 1
.005 % + 1
2%+12%+1
Drive capability
Accuracy
(% of span)
0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA
(selectable at power-up) Over-range to 24.000 mA
789: 24 V compliance
or, 1,200 ohms,
@ 20 mA 787: 12 V
compliance or,
500 ohms, @ 20 mA
.05 %
DC current simulate (external
0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA,
24 V loop supply, up to 48 V on
(selectable at power-up) Over-range to 24.000 mA
789 only)
1000 ohms, @ 20 mA
.05 %
250 ohms @ 20 mA
> 24 V
24 V loop supply
789: Minimum 24 V 787: Not available
Current adjustment modes
Manual: Coarse, Fine, 25 % and 100 % step (100 % step 789 only)
Automatic: slow ramp, fast ramp, 25 % step
TPAK
TL220
Magnetic
Meter Hanger
See page 62
SureGrip Industrial
Test Lead Set
See page 55
80T-150U
PV350
Universal
Temperature Probe
See page 59
Pressure Vacuum
Module
See page 63
Temperature range of 18 °C to 28 °C, for one year after calibration.
Maximum voltage applied between any jack and earth ground:1000 V rms. Storage temperature: -40 °C to 60 °C.
Operating temperature: -20 °C to 55 °C. Relative humidity: 95 % up to 30 °C; 75 % up to 40 °C; 45 % up to 50 °C; 35 % up to 55 °C.
Safety: Designed in accordance with EN61010, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 Over-voltage CAT III.
Size (HxWxL)/weight (787 with holster): 52 mm x 98 mm x 201 mm (2.06 in x 3.86 in x 7.93 in)/638 g (1.4 lb).
Size (HxWxL)/weight (789): 50 mm x 100 mm x 203 mm (1.97 in x 3.94 in x 8.00 in)/600 g (1.3 lb).
Warranty: Three-year.
Ordering information
Included accessories
Models
Test leads, alligator clips, 4 AA alkaline batteries (installed), quick referr
ence guide, users manual, multi-language manual CD.
FLUKE-789
ProcessMeter
Test leads, alligator clips, holster with test lead storage, one 9 V alkaline
battery (installed), quick reference guide, users manual, multi-language
manual CD.
FLUKE-787
ProcessMeter
For more information, go to www.fluke.com/processmeters
Check price and availability at
www.fluke.com/wtb
Process Calibration Tools
33
Fluke 715, 707 and 705 Loop Calibrators
Complete family of volt/mA calibrators
ke 715 Volt/mA Calibrator
urce voltage to 200 mV or 20 V
asure loop current (0 to 20 mA, 4 to 20 mA) signals
th 0.01 % accuracy and 1 µA resolution
asure voltage output process signals from PLCs,
nsmitters
urce or simulate 4-20 mA loop current
V loop supply with simultaneous current
asurement
mp and Step Ramp output functions
Specialty models
Fluke 707 Ex
Intrinsically Safe
Loop Calibrator
See page 39 for more
information.
ke 707 and 705
novative output adjustment dial on 707 provides
A and 100 µA resolution and one-hand operation
rge display and simple interface for ease of use
multaneous mA and % readout for quick, easy
erpretation of readings
A accuracy of 0.015 % on the Fluke
7 and 0.02 % on the 705
RT™ mode on 707 connects 250
m resistor in series with 24 V
p for compatibility with HART
mmunicators
sh button 25 % steps for fast, easy
earity checks
pan Check” for fast confirmation of
o and span
Selectable slow and fast linear step ramp provide
ramping outputs for valve slewing, remote testing and
loop functional tests
Fluke 707
• 24 V internal loop supply, so you can power and read a
transmitter at the same time without carrying a DMM
• 0-20 mA or 4-20 mA default start up modes
Resources
More info online at
www.fluke.com/processtools
Check out our latest videos at
www.fluke.com/ptoolsvideos
All the information you need at
www.fluke.com/processsolutions
Specifications
Functions
Fluke 705 and 707
Fluke 715
Voltage measurement
Range
Resolution
Accuracy
0 V to 28 V
0 mV to 200 mV
0 V to 25 V
1 mV
10 µV
1 mV
705: 0.025 % Rdg + 1 LSD 707,
707Ex: 0.015 % Rdg + 2 LSD
0.01 % Rdg + 2 LSD
0 mA to 24 mA
0 mA to 24 mA
Recommended accessories
Current measurement
Range
Resolution
Accuracy
0.001 mA
0.001 mA
705: 0.02 % Rdg + 2 LSD 707,
707Ex: 0.015 % Rdg + 2 LSD
0.01 % + 2 LSD
Current sourcing
Range
Accuracy
Drive capability
0 mA to 20 mA or 4 mA to 20 mA
0 mA to 20 mA or 4 mA to 20 mA
705: 0.025 % Rdg + 2 LSD 707,
707Ex: 0.015 % Rdg + 2 LSD
0.01 % Rdg + 2 LSD
705: 1000 1 @ 24 mA 707: 1200 1 @
24 mA 707Ex: 700 1 @ 20 mA
1000 1 @ 24 mA
1
Loop power while measuring mA
24 V
24 V
TL28A
TL220
Heavy Duty
Test Lead Set
SureGrip Industrial
Test Lead Set
See page 55
0 mV to 200 mV or 0 V to 20 V
Voltage sourcing
Display current and % of span
Yes
mA or %
Auto step, auto ramp
Yes
Yes
Span Check
Yes
Yes
Battery life
18 hours typical, at 12 mA
18 hours typical, at 12 mA
Warranty
Three-year
Will over-range to 24 mA.
Ordering information
Included accessories
Models
Test leads, alligator clips, holster with test lead storage, NIST-traceable
calibration report and data, single 9 V alkaline battery, instruction sheet
(14 languages).
FLUKE-715
Volt/mA Calibrator
FLUKE-707
Loop Calibrator
FLUKE-707 Ex
Intrinsically Safe Loop Calibrator
FLUKE-705
Loop Calibrator
C550
PV350
Tool Bag
See page 54
Pressure Vacuum
Module
See page 63
Check price and availability at
www.fluke.com/wtb
34
Process Calibration Tools
For more information, go to www.fluke.com/loop
Fluke 741B, 743B and 744 Calibrators
Calibrate/troubleshoot process control instrumentation
alibrate temperature, pressure, voltage, current,
sistance and frequency instruments
uilt-in procedures for transmitters, square root
ansmitters, pressure and temperature switches
multaneously measure and source
utomatically capture calibration results
ocument procedures and results to meet ISO
000, EPA, FDA, OSHA, and other government
quirements
easure/simulate 13 types of thermocouples and
ght RTDs
ore up to 8,000 readings in data logging mode
43B and 744 only)
otected against dirt, dust and moisture; unafcted by vibration
cludes a PC interface (743B and 744 only)
perate in English, French, German, Italian and
panish
ne- and two-year calibration cycles and a
ree-year warranty (one-year for pressure
odules)
4: Get HART-ability
Fluke 744 offers all of the capabilities of the
B, plus the ability to calibrate, maintain, and
bleshoot HART instrumentation. Integrated
HART communication functions permit you to monitor, control, and calibrate HART instrumentation. It
handles fast pulsed instruments such as RTD transmitters and PLCs, with pulses as short as 1 ms.
See www.fluke.com/744upgrade for the latest
list of HART instruments.
Pressure
Enabled
Recommended software
Instrumentation
management software
The Fluke 743B and 744 are compatible with Fluke 700SW DPC/TRACK
software and with software from
Cornerstone, Emerson, Honeywell,
On Time Support, Prime Technologies, Yokogowa, Intools, Meridium
and Beamex.
For more information, visit
www.fluke.com/software
Resources
More info online at
www.fluke.com/processtools
All the information you need at
www.fluke.com/processsolutions
www.fluke.com/ptoolsvideos
741B: A complete documenting calibrator
The 741B is the economical choice for plants that don’t use
PCs or that require traditional paper forms. It has storage
capacity for a day’s calibration and measurement data.
When you’re back at the shop, recall the data on-screen to
fill out calibration forms.
743B: More memory, plus a PC interface
and data logging
The 743B has all the capabilities of the 741B plus a PC
interface that lets you load procedures, lists, and instructions created with software—or unload data for printing,
archiving, and analysis. With its expanded memory, the
743B can hold a full week of calibrations and procedures.
Recommended accessories
Fluke 743B
Specifications
Functions
Measure
Sourcing
DC voltage
0.025 % reading +
0.005 % full scale
0.01 % output +
0.005 % full scale
DC current
0.01 % reading +
0.015 % full scale
0.01 % output +
0.015 % full scale
Resistance
0.05 % reading + 50 mΩ
0.01 % output + 40 mΩ
Frequency
0.05 %
0.01 %
Thermocouples
0.3 °C
0.2 °C
RTDs
0.3 °C
0.1 °C
Pressure
Summary specifications: best case, mid-range,
one year.
Battery life: Typically over eight hours
Internal battery pack: NiMH 3500 mAh
Battery replacement: Via snap-shut door
without opening calibrator; no tools required
Weight: 1.4 kg (3 lb, 1 oz)
Size (HxWxD): 236 mm x 130 mm x 61 mm
(9.3 in x 5.1 in x 2.4 in)
To 0.25 % of full scale, per pressure
module specifications
700P
700Pxx
80PK-25
Pressure Modules
See page 38
SureGrip Piercing
Temperature Probe
See page 58
700PTP-1
C789
Pneumatic
Test Pump
See page 59
Meter and
Accessory Case
See page 54
Ordering information
Included accessories
Models
Industrial test leads (2 sets), test clips (2 sets), test probes, NiMH
battery pack, battery charger, serial port cable, DPC/TRACK
sample version with free PC communication utility software, HART
communications cable, HART user’s manual, NIST traceable calibration
certificate and data, instruction manual.
FLUKE-744
Industrial test leads (2 sets), test clips (2 sets), test probes, battery
pack, battery charger, serial port cable (743B only), DPC/TRACK sample
version with free PC communication utility software (743B only), NIST
traceable calibration certificate and data, instruction manual.
FLUKE-743B
Documenting Process Calibrator
FLUKE-741B
Documenting Process Calibrator
FLUKE-700S
DPC/Track Software
For more information, go to www.fluke.com/740
Documenting Process Calibrator
Check price and availability at
www.fluke.com/wtb
Process Calibration Tools
35
Fluke 726 and 725 Multifunction
Process Calibrators
luke 726 Precision Multifunction
Process Calibrator
he Fluke 726 measures and sources almost all proess parameters and can calibrate almost anything.
nterpret results without the help of a calculator and
tore measurement data for later analysis.
Precise measurement and calibration source performance, accuracies of 0.01 %
Transmitter error% calculation, interpret calibration
results without a calculator
Memory storage for up to eight calibration results,
return stored calibration data from the field for later
analysis
Frequency totalizer and frequency pulse train source
mode for enhanced flowmeter testing
HART mode inserts 250 ohm resistor in mA
measure and source for compatibility with HART
instrumentation
Integrated pressure switch test allows you to capture
the set, reset and deadband of a switch
Custom RTD curves, add calibration constants for
certified RTD probes for temperature measurement
Voltage input protection design for improved
reliability
Fluke 725 Multifunction
Process Calibrator
Pressure
Enabled
• Measure volts, mA,
RTDs, thermocouples, frequency
and ohms to
test sensors and
transmitters
• Source/simulate
volts, mA, thermocouples, RTDs,
frequency, ohms
and pressure to calibrate transmitters
• Measure/source
pressure using any
of 29 Fluke 700Pxx
Pressure Modules
• Source mA with simultaneous
pressure measurement to conduct
valve and I/P tests
• Support flow meter testing with
frequency and counts per minute
(CPM) functions
• Perform fast linearity tests with
auto step and auto ramp features
Take the 725 virtual demo tour at
www.fluke.com/725demo
Specifications
Measure and source
Functions
Range or type
Resolution
Accuracy
Notes
Voltage
0 to 100 mV
0 to 10 V (source)
0 to 20 V (source)
0 to 30 V (measure)
0.01
0.01
0.01
0.01
0.01 %,
0.02 %
Rdg + 2 LSD
Max load, 1 mA
mA
0 to 24
0.001 mA
0.01 %,
0.02 %
Rdg + 2 LSD
Max load, 1000 1
mV (TC
terminals)
-10.00 mV to
+75.00 mV
.01 mV
0.01 %, 0.02 %
of range + 1 LSD
Ohms
15 1 to 3,200 1
5 1 to 4,000 1
0.01 1
to 0.1 1
0.10 1 to 1.0 1
0.015 %
Hz - CPM
2.0 to 1,000 CPM
1 to 1000 Hz
1.0 to 10.0 kHz
10.0 to 15.0 kHz
0.1 CPM
1 Hz
0.1 kHz
0.1 kHz
±
±
±
±
Loop supply
24 V dc
N/A
10 %
T/C
J, K, T, E, L, N, U, XK
0.1 °C, 0.1 °F
to 0.7 °C
to 0.2 °C
T/C
B, R, S, BP
1 °C, 1 °F
to 1.7 °C
to 1.2 °C
RTDs
Cu (10), Ni120 (672)
Pt 100, 200, 500,
1000 (385)
Pt 100 (3916),
Pt 100 (3926)
0.01 °C,
0.01 °F
to 0.15 °C
0.1 °C, 0.1 °F
to 0.2 °C
mV
V
V
V
0.05 %
0.05 %
0.25 %
0.05 %
Source;
5 V p-p
1 V to 20 V p-p
squarewave,
-0.1 V offset
General specifications
Storage temperature:
-20 °C to 71 °C
Operating temperature:
-10 °C to 55 °C
Relative humidity:
90 % (10 °C to 30 °C);
75 % (30 °C to 40 °C);
45 % (40 °C to 50 °C);
35 % (50 °C to 55 °C)
Shock: 1 meter drop test
Safety: CSA C22.2
No. 1010.1:1992
EMC: EN50082-1:1992 and
EN55022:1994 Class B
Size (HxWxD): 200 mm x
96 mm x 47 mm (7.9 in x
3.8 in x 1.9 in)
Weight: 650 g (23 oz)
Battery: Four AA alkaline
batteries
Battery life: 25 hours typical
Warranty: Three-years
Intrinsically safe version available
(see page 39)
Recommended accessories
Unique 726 specifications are bolded.
Simultaneous function capability
Channel A
Channel B
24.000 mA dc
M
M or S
24.000 mA dc with 24 V loop supply
M
100.00 mV dc
M or S
30.000 V dc measure
TPAK
80PK-27
Magnetic
Meter Hanger
See page 62
Industrial Surface
Temperature Probe
See page 58
M
20.000 V dc measure; 10.000 V dc source; 20.000 V dc source
M or S
15 to 3200 Ohms (725); 5 to 4000 Ohms (726)
M or S
Thermocouple J, K, T, E, R, S, B, M, L, U, N, XK, BP
M or S
RTD Cu 10, Ni120; Pt100 (392); Pt100 (JIS); Pt100, 200, 500, 1000 (385), XK and BP
Pressure (requires Fluke 700PXX Modules)
M or S
M
Frequency; 10 kHz; (15 KHz 726)
M used as S
M or S
M = Measure, S = Source/Simulate
700Pxx
C125
Pressure Modules
See page 38
Soft Carrying Case
Ordering information
36
Included accessories
Models
Test leads, test clips, one pair of stackable test
leads, product overview manual, users manual in
14 languages on CD.
FLUKE-726
Precision Multifunction Process Calibrator
FLUKE-726 Ex
Intrinsically Safe Precision Multifunction Process Calibrator
FLUKE-725
Multifunction Process Calibrator
Process Calibration Tools
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/726
Fluke 712, 714 and 724
Temperature Calibrators
The Fluke 710 Series temperature calibrators deliver
outstanding performance, durability and reliability.
And with a push-button interface, similar to the
multifunction Fluke 740 Series Documenting Process
Calibrators, the 710 Series are easy to use. Each
calibrator is EMI tolerant, dust- and splash-resistant,
and features a removable battery door for quick battery
changes.
Fluke 714 Thermocouple Calibrator
•
•
•
•
•
•
•
•
Measure temperature from TC probes
Simulate TC output
Operable with nine types of thermocouples
Calibrate linear TC transmitter with mV source
function
Selectable °F or °C
25 % stepping, auto-step and auto-ramp
Available as accessories: Fluke 700TC1 and TC2
Thermocouple Mini-plug Kits
Ramp and Step Ramp output functions
Fluke 712 RTD Calibrator
• Compatible with pulsed current
transmitters
• Measure temperature from an
RTD probe
• Simulate RTD output
• Operates with seven types of RTD
• Measure additional RTDs using
ohms measurement function
• Simulate additional RTDs using
ohms source function
• °F or °C selectable
• 25 % stepping, auto-step and
auto-ramp
• Ramp and Step Ramp output
functions
Specialty model
Fluke 724 Temperature
Calibrator
• Source/measure
TCs, RTDs, volts
and ohms
• Measure mA
while supplying
loop power
• 25 % and 100 %
stepping, autostep and auto
ramp
Resources
Information for the classroom at
www.fluke.com/education
Recommended accessories
TL75 (712/724)
TL220 (712/724)
Hard Point
Test Lead Set
See page 57
SureGrip Industrial
Test Lead Set
See page 55
80PK-24 (714/724)
80PK-3A (712/724)
SureGrip Air
Temperature Probe
See page 58
Surface Probe
See page 58
Specifications
Models
Functions
Range
Resolution
Accuracy
Notes
Measure/simulate RTD
-200 °C to 800 °C
(Pt 100-385)
0.1 °C, 0.1 °F
0.2 °C, 0.4 °F
(Pt 100-385)
Pt; 100 200 500
1000 (385); Pt 100
(392); Pt 100 (392) JIS;
Ni 120 (672)
Measure/simulate
resistance
5 1 to 4000 1
0.1 1
0.025 %
Measure/simulate
thermocouple
-200 °C to 1800 °C,
depending on type
(K, -200 °C to
1370 °C)
0.1 °C or °F
(1 °C or °F; BRS)
0.5 °C, 0.8 °F
(Type K)
Measure/simulate mV
-10 mV to 75 mV
0.01 mV
0.015 % +10 µV
Fluke 712
Fluke 714
9 TC types; J K T E R
S B per NIST 175 and
ITS-90 L U per DIN
43710 and PTS-68
Maximum voltage: 30 V. Non-operating temperature: -40 °C to 60 °C. Operating temperature: -10 °C to 55 °C.
Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C).
Operating altitude: 3,000 m max. Shock: 1 m drop test. Vibration: Random, 2 g, 5-500 Hz.
Safety: CSA C22.2 No. 1010.1:1992. EMC: EN50082-1:1992 and EN55022:1994 Class B.
Size/weight (HxWxD) (712-717): 187 mm x 87 mm x 32 mm (7.35 in x 3.41 in x 1.25 in) 330 g (12 oz).
Size/weight (HxWxD) (712-717 with holster): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz).
Size/weight (HxWxD) (718): 210 mm x 83 mm x 62 mm (8.25 in x 3.27 in x 2.44 in) 737 g (26 oz).
Size/weight (HxWxD) (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz).
Power: 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 .
Battery life: 4 to 20 hours, typical, depending on functions used.
Warranty: Three-year (one-year on pressure pump in Fluke 718).
TPAK
AC220
Magnetic Meter Hanger
See page 62
SureGrip Alligator Clips
See page 57
C101 (724)
C25 (712/714)
Meter Hard Case
See page 54
Large Soft Case
See page 54
Ordering information
Included accessories
Models
Test leads, test clips, one pair of stackable test leads, product overview
manual, users manual in 14 languages on CD.
FLUKE-724
Temperature Calibrator
Test leads, alligator clips (excluding model 714), holster with test lead
storage, single 9 V alkaline battery and instruction sheet (14 languages).
FLUKE-714
Themocouple Calibrator
FLUKE-712
RTD Calibrator
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/tempcal
Process Calibration Tools
37
Fluke 717, 718 and 719 Pressure Calibrators
Accurate and rugged, temperature calibration tools
Fluke 719 Electric Pressure Calibrators
• Electric pump enables one handed pressure pumping and
makes pressure calibration quicker and easier
• Best in class 0.025 % pressure measurement accuracy
• Programmable pump limit settings can eliminate overpressurization—set ‘pump to’ pressure values
• Two ranges, 30 PSI and 100 PSI
Fluke 718 Pressure Calibrators
• 1, 30, 100 and 300 PSI ranges available
• Pump to 300 PSI, 20 bar with internal
pump (718-300G)
• 718-1G includes special low volume
pump and high measurement resolution
for low pressure calibration
Fluke 717 Pressure Calibrators
• Measure up to 5000 PSI/345 bar sensor
(5000G model)
• Compatible with non-corrosive gases
and liquids
718 and 719
Fluke 719
Fluke 700 Series Pressure Modules
• 29 pressure modules
• 8 intrinsically safe
pressure modules*
• Ranges from
1.000 in H20
(0.2491 kPa)
to 10,000 psi
(68.948 MPa)
• Gage, differential,
dual (compound),
absolute, and
vacuum modules
• Rugged cases protect the modules
from harsh environments
• Full-accuracy performance from
0 °C to 50 °C
*For use with 718Ex and 725Ex only
(see page 39 for more information).
Fluke 718
• Precision vernier for fine pressure
adjustment
• Variable release rate bleed valve for
controlled pressure release
Pressure
Enabled
Specialty model
Pressure
Enabled
717, 718 and 719 common
features
Fluke Process Calibrators in this catalog displaying the Pressure Enabled
symbol display readings from the
700 Series Pressure Modules.
Resources
• Pressure switch test makes a difficult
task easy, captures set, reset and deadband values of a pressure switch
• 717 and 718, measure pressure to
0.05 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy
and 0.001 mA resolution, while sourcing 24 V loop power
More info online at
www.fluke.com/processtools
Check out the 719 video at
www.fluke.com/719video
Fluke 717
Specifications
Models
Range
Resolution
Comment
717-1
+/- 1 psi, 27.5 in H20,
(-7 - +7 kPa)
+0.0001 psi, 0.0001 kPa,
0.0001 in H20
Fluke-718 dry air only and includes on board
pump
-12 to + 30 psi,
(-83 to 207 kPa)
0.001 psi, 0.001 kPa, 0.001
in H20
Fluke-718 and Fluke-719 dry air only and
includes on board pump
-12 to + 100 psi,
(-83 to 690 kPa)
0.01 psi, 0.01 kPa, 0.01 in H20
Fluke-718 and Fluke-719 dry air only and
includes on board pump
-12 to +300 psi,
(-83 to +2070 kPa)
0.01 psi, 0.01 kPa, 0.01 in H20
Fluke-718 dry air only and includes on board
pump
717-500G
0-500 psi, 0-3450 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive gases and fluids
717-1000G
0-1000 psi, 0-6900 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive gases and fluids
700ILF
700LTP-1
717-1500G
0-1500 psi, 0-10342 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
717-3000G
0-3000 psi, 0-20700 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
In-Line Filter
See page 59
Low Pressure
Test Pump
See page 59
717-5000G
0-5000 psi, 0-34500 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
Pressure accuracy
0.05 % of range, one year for 717 and 718. 0.025 % for six months, 0.035 % of range, one year for the 719
mA measurement
0-24 mA range
Loop power
24 V dc
718-1G
717-30G
718-30G* and
719-30G
717-100G
718-100G*
717-300G
718-300G* and
719-100G
0.001 mA resolution
Recommended kits
Accuracy: ± 0.015 % + 1 count
Accuracy: ± 10 %
*Intrinsically safe models available, see page 39.
Warranty: Three-year on calibrator, one-year on pump.
Ordering information
Included accessories
Test leads, alligator
clips, holster, test hose
(719), one 9 V alkaline
battery (two 9 V batteries in 718 and 719),
safety sheet.
700HTP-1
C116
Hydraulic Test Pump
See page 59
Large Soft Case
See page 54
Models
FLUKE-719-30G
Electric Pressure Calibrator
FLUKE-719-100G
FLUKE-718 1G
Pressure Calibrator
FLUKE-718 30US
Electric Pressure Calibrator
Pressure Calibrator
FLUKE-718 100US
Pressure Calibrator
FLUKE-718 300G
Pressure Calibrator
FLUKE-717 1G
Pressure Calibrator
FLUKE-717 30G
Pressure Calibrator
FLUKE-717 100G
Pressure Calibrator
FLUKE-717 300G
Pressure Calibrator
FLUKE-717 500G
Pressure Calibrator
FLUKE-717 1000G
Pressure Calibrator
FLUKE-717 1500G
Pressure Calibrator
FLUKE-717 3000G
Pressure Calibrator
FLUKE-717 5000G
Pressure Calibrator
Check price and availability at
www.fluke.com/wtb
For a full list of Fluke 700 Pressure Modules, visit www.fluke.com/pressure.
38
Process Calibration Tools
For more information, go to www.fluke.com/pressure
Intrinsically Safe Products
Calibrators, thermometers and multimeters
designed to intrinsic safety standards
What is “Intrinsically Safe”?
Intrinsic safety is a protection method employed in potentially explosive atmospheres.
Devices that are certified as “intrinsically safe” are designed to be unable to release
sufficient energy, by either thermal or electrical means, to cause ignition of flammable
material (gas or dust/particulates).
There are no global intrinsically safe standards or certifications, but there are organizations that influence directives in certain world geographies.
Factory Mutual – In the United States, Factory Mutual Research,
managed by Factory Mutual (FM) Global, is a non-profit scientific and
testing organization that has tested and certified over 40,000 products
in the last 165 years. FM Research has set certification guidelines for
equipment used in potentially explosive atmospheres.
Canadian Standards Association (CSA) – Accreditation body for
North American regulations, based in Toronto, Canada.
ATEX – The primary intrinsically safe standard, which has been set
in the European Union with the Directive 94/9/EC, commonly called
ATEX (“Atmosphères Explosibles”), French for explosive atmospheres.
For more information and detailed specifications, turn to the corresponding non-intrinsically safe product pages (Fluke 707, 718, 725,
574, 68) or go to www.fluke.com/ex.
Fluke products
87V Ex: Intrinsically
Safe True-rms Multimeter
ATEX certified
North American
Certification
For additional
product detail
See page 12
II 2 G Ex ia IIC T4
707Ex: Intrinsically
Safe mA Calibrator
II 2 G Ex ia IIC T4
N.I. Class I, Div 2,
Groups A-D T4
See page 34
Specialty models
Fluke 68IS Intrinsically Safe
Infrared Thermometer
• Laser guided sighting
system with 1 % accuracy
• 12-point data logging
• Advanced optics
• Adjustable emissivity
• Selectable Max/Min/Dif/Avg
functions that display values
instantly with Hi/Lo Alarm
• Expanded measurement
range up to 760 °C (1400 °F)
• RTD probe accessory included
• Class I, Division 1, Groups A,
B, C, D Class I, Zone 0, AEx ia IIC,
T4 at 50 °C when used with 9 V
alkaline battery
Not available for purchase in Europe.
574-NI
Nonincendive
Thermometer
For data loading
and extra safety
the Fluke 574
Nonincendive (NI)
Thermometer has
the same great features as the 574
model thermometer with the extra confidence of a Factory Mutual approval
for use in hazardous environments.
Class I, Division 2, Groups A, B, C, D: Class I, Zone 2 IIC;
T4 Ta=50 °C when used with 1.5 V alkaline batteries.
718Ex: Intrinsically
Safe Pressure Calibrator
See page 38
II 1 G Ex ia IIC T4
Groups A-D T4
Resources
More info online at
www.fluke.com/processtools
725Ex: Intrinsically Safe
Multifunction Calibrator
See page 36
II 1 G Ex ia IIB 171 °C
Groups B-D, 171 °C
Take a look at all the intrinsically safe
models at www.fluke.com/insafety
700PEx: Intrinsically
Safe Pressure Modules
II 1 G Ex ia IIC T4
I.S. Class I, Div 1,
Groups A-D T4
See page 38
Class I, Division 2,
Groups A, B, C, D;
Class I, Zone 2 IIC
See page 50
Fluke 574-NI Nonincendive
Infrared Thermometer
All the information you need at
www.fluke.com/processsolutions
Fluke 68IS Intrinsically Safe
Infrared Thermometer
Class I, Division 1,
Groups A, B, C, D
Class I, Zone 0 AEx
ia IIC
Ordering information
Models
Models
FLUKE-87VEx
IS True-rms Multimeter
FLUKE-707Ex
IS Loop Calibrator
FLUKE-718Ex
IS Pressure Calibrator
FLUKE-725Ex
IS Multifuction Process Calibrator
FLUKE-700PEx
Pressure Modules (700P: 01, 5, 6, 9, 24, 27,
29, A4Ex)
FLUKE-574-NI
Precision Infrared Thermometer w/Logging SW
Nonincendive
FLUKE-68IS
Infrared Thermometer Intrinsically Safe
For more information, go to www.fluke.com/ex
Check price and availability at
www.fluke.com/wtb
Process Calibration Tools
39
Fluke ScopeMeter® Test Tools
Handheld oscilloscopes for industrial,
instrumentation and electronic applications
Fluke 225C
TM
Fluke 199C
ScopeMeter test tools are the rugged, safe choice for a wide
variety of field service installation and maintenance applications.
These handheld battery-powered oscilloscopes tools are easy to
use, with a built-in multimeter, paperless recording and analysis
capabilities. They are rugged and IP 51 dust- and drip-proof rated
to IEC529 standards to withstand harsh environments.
The new 190 Series II, four isolated input channels and
100 MHz or 200 MHz bandwidth are ideal for industrial machinery applications measuring three-phase power electronics or
three-axis control systems comparing and contrasting multiple
signals simultaneously. These tools are safety, rated at CAT III
1000 V/ CAT IV 600 V with longer battery life and up-to-date
USB interface technology.
Fluke 124
The 190C Series, with two isolated inputs and 60 MHz,
100 MHz or 200 MHz bandwidth, is the choice for industrial
electronic applications like automation and process control. These
oscilloscopes are rated for CAT II 1000 V/ CAT III 600 V environments and will operate for up to four hours without a recharge.
The 120 series with 20 MHz or 40 MHz bandwidth, dual DMMs
and paperless recording is the optimal choice for electrical and
electro-mechanical applications, safety rated to IEC EN61010-1
CAT III 600 V.
For Industrial network applications, Fluke 125, 215C or 225C
add industrial network physical layer analog measurement algorithms to validate the network bus health.
Selection guide
120 Series
123
190C Series
124
125
•
•
215C
225C
192C
190 Series II
196C
199C
190-104
190-204
Bandwidth
20 MHz
•
40 MHz
•
60 MHz
•
100 MHz
•
•
200 MHz
•
•
•
Input channels
2Ch + 2 DMM
•
•
•
2Ch + DMM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4Ch
Isolated inputs
Triggering
Connect-and-View
•
•
•
Advanced triggering
Advanced measurement function
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ScopeRecord
•
•
•
•
•
•
•
100 screen replay
•
•
•
•
•
•
•
•
•
Cursors
TrendPlot
•
Industrial bus health
•
Harmonics
•
•
•
•
•
•
•
•
Power measurements
•
•
•
•
•
•
•
•
Waveform mathematics
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FFT
EN61010-1 safety
CAT II 1000 V
CAT III 600 V
•
•
•
CAT III 1000 V
CAT IV 600 V
Interface
Optical RS-232
USB PC interface
•
•
•
•
•
•
•
•
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
USB memory port
Power
Ni-MH
•
•
•
•
•
•
•
•
7
7
7
4
4
4
4
4
Li-Ion
Battery (hours)
•
•
7
7
General specifications
Size (HxWxD)
Weight
40
ScopeMeter Test Tools
9.2 in x 4.5 in x 2 in
10.1 in x 6.7 in x 2.5 in
10.5 in x 7.5 in x 2.8 in
2.6 lb
4.4 lb
4.8 lb
For more information, go to www.fluke.com/scopemeter
Fluke 123 and 124
ScopeMeter® Test Tools
Three-in-one simplicity
The compact ScopeMeter 123 and 124 are
the rugged solution for industrial troubleshooting and installation applications.
Each is a truly integrated test tool, with
oscilloscope, multimeter and “paperless”
recorder in one affordable, easy-to-use
instrument. Find fast answers to problems
in machinery, instrumentation, control
and power systems.
• Dual-input 40 MHz or 20 MHz digital
oscilloscope
• Two 5,000-count true-rms digital
multimeters
• A dual-input TrendPlot ™ recorder
• Connect-and-View ™ trigger simplicity
for hands-off operation
• Shielded test leads for oscilloscope, resistance and continuity
measurements
• Up to seven hours battery operation
• CAT III 600 V safety certified
• Optically isolated RS-232 interface
• IP 51 rated, rugged compact case
Resources
Improve your troubleshooting
skills, Fluke can help!
Visit the ScopeMeter Training Center:
www.fluke.com/ScopeMeterTraining
Center
Recommended kits
SCC 120 Kit
• Software
• Cable
• Hard carrying case
Connect-and-View ™ triggering for an
instant, stable display
Scope users know how difficult triggering
can be. Incorrect settings show unstable and
sometimes incorrect results. Fluke’s unique
Connect-and-View recognizes signal patterns
and automatically and continuously sets up
correct triggering. It provides a stable, reliable
and repeatable display of virtually any signal.
Use TrendPlot™ to help find intermittents
The toughest faults to find are those that
happen only once in a while—intermittents.
They can be caused by bad connections, dust,
dirt, corrosion or simply broken wiring or connectors. Other factors, like line outages and
sags, can also cause a machine to stop. You
may not be around to see it—your Fluke ScopeMeter will. In this “paperless recorder” mode,
you can plot the minimum and maximum peak
values and average over time—up to 16 days.
SCC 190 Kit
• Software
• Cable
• Hard carrying case
Connect-and-View captures even the most
complex motor drive signals.
Recommended accessories
Battery powered mobility
Up to seven hours of battery operation frees
you from mains outlets for true on-the-move
working. The rugged and drip proof case
assures long life and reliable operation in the
harshest industrial environments.
Safety rated
The ScopeMeter 123 and 124 are safety
rated for measurements on CAT III 600 V rms
industrial power systems with the included
test leads.
PAC91
i30s
Printer Adapter Cable
AC/DC Current Clamp
See page 61
Use TrendPlot to help find intermittents, fast.
C125
C195
Soft Carrying Case
See page 54
Tool Bag
See page 54
Ordering information
Included accessories
Models
Test lead set, alligator clips, hook clips, battery pack, battery
charger/line voltage adapter, BNC adapter, getting started
guide, users manual on CD.
FLUKE-124S
Test lead set, alligator clips, hook clips, battery pack, battery
charger/line voltage adapter, BNC adapter, OC4USB optically
isolated RS-232 adapter/cable, FlukeView for ScopeMeter
Windows® software, hard carrying case, getting started
guide, users manual on CD.
Industrial ScopeMeter, 40 MHz, with SCC120 kit
FLUKE-124
Industrial ScopeMeter, 40 MHz
FLUKE-123S
Industrial ScopeMeter, 20 MHz, with SCC120 kit
FLUKE-123
Industrial ScopeMeter, 20 MHz
SCC120
Kit containing FlukeView software for Windows,
USB interface adapter/cable and hard case
For more information, go to www.fluke.com/scopemeter
Check price and availability at
www.fluke.com/wtb
ScopeMeter Test Tools
41
Fluke 190 Series II ScopeMeter® Test Tools
See more, fix more, in harsh industrial environments
Goes where ordinary scopes can’t go
Safety rated for industrial applications, the 190
Series ScopeMeter combines rugged portability
with high performance to take you all the way
from troubleshooting microelectronics to power
electronic applications.
The first high-performance four-channel scopes
built for harsh industrial environments
For the first time, plant maintenance engineers and
technicians can take a high-performance fourchannel scope into the harsh world of industrial
electronics. The new Fluke 190 Series II is the
only portable oscilloscope with four independent
isolated input channels, a CAT III 1000 V/CAT
IV 600 V safety rating, and an IP 51 dust-proof
and drip-proof rating. Both the 200 MHz (Fluke
190-204) and 100 MHz (Fluke 190-104) bandwidth
models offer these capabilities:
• 4 independent isolated inputs, up to 1000 V
• High-speed sampling: Up to 2.5 GS/sec
• Deep memory: 10,000 points per trace waveform
capture
• CAT III 1000 V/CAT IV 600 V safety rated for
high voltage environments
• Up to 7 hours of battery operation, standard
• Isolated USB host port for direct data storage to a
USB memory
• Device, plus USB device port for easy PC
communication
• Easy-access battery door for quick battery swaps
in the field
• Compact and only 2.2 kg (4.8 lb)
• Security slot: lock down oscilloscope with
Kensington lock while unattended
Fluke 190-204
Fluke 199C
Automatic capture and replay of
100 screens
Scope users know how frustrating it is to
see a one-time anomaly flash by—never
to be seen again. Not with the ScopeMeter
190 series. Now you can look back in
time with a touch of the replay button. In
normal use, the instrument continuously
memorizes the last 100 screens, on a first
in-first out basis. At any moment you can
“freeze” the last 100 screens and scroll
through picture-by-picture or replay as a
“live” animation. Cursors can be used for
further analysis.
ScopeRecord mode for high-resolution
waveform recording up to 48 hours
ScopeRecord memory stores up to 27,000
data points per channel, capturing fast
intermittents and glitches as short as 8ns.
• Stores events like motion profiles, UPS,
power supply and motor start-ups
Sample screens
Connect-and-View™ captures even the most complex
motor drive signals.
Use the 27,000 points memory of ScopeRecord and
zoom in for maximum detail.
• In Stop On Trigger mode, ScopeMeter
automatically recognizes a power failure
and stores the waveform data
• With the waveform zoom (up to 100x)
you can look at the smallest details, like
individual power cycles
TrendPlot Paperless Recorder
The toughest faults to find are those that
happen once in a while. These intermittents can be caused by bad connects,
dust, dirt, corrosion, or simple broken
wiring or connectors. Line outages, sags
or starting and stopping of a motor can
also cause a machine to stop. You may not
be around when it happens, but the Fluke
ScopeMeter will.
• Plot minimum and maximum plot values
and average over time up to 16 days
• Plot any combination of voltages, amps,
temperature, frequency and phase for
all four inputs, all with time and date
stamp to pinpoint faults
Cursors and zoom features of the Fluke 190 Series help
you to analyze the captured TrendPlot.
Resources
Go to www.fluke.com/fourchannelscopemeterr for interactive troubleshooting demonstrations.
Ordering information
42
Included accessories
Models
Test lead set, voltage probes
(200 MHz, 10:1)-red and gray,
battery charger/line voltage
adapter, battery pack, getting
started guide, users manual
on CD.
FLUKE-190-204
ScopeMeter Test Tools
Color ScopeMeter (200 MHz, 2.5 GS/s, 4 channel)
FLUKE-190-204S
Color ScopeMeter (200 MHz , 2.5 GS/s, 4 channel), with SCC290-kit
FLUKE-190-104
Color ScopeMeter (100 MHz, 1.25 GS/s, 4 channel)
FLUKE-190-104S
Color ScopeMeter (100 MHz, 1.25 GS/s, 4 channel), with SCC290-kit
FLUKE-199C
Color ScopeMeter (200 MHz, 2.5 GS/s)
FLUKE-199C/S
Color ScopeMeter (200 MHz, 2.5 GS/s) + SCC190
FLUKE-196C
Color ScopeMeter (100 MHz, 1 GS/s)
FLUKE-196C/S
Color ScopeMeter (100 MHz, 1 GS/s) + SCC190
FLUKE-192C
Color ScopeMeter (60 MHz, 500 MS/s)
FLUKE-192C/S
Color ScopeMeter (60 MHz, 500 MS/s) + SCC190 kit
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/scopemeter
Fluke 225C, 215C and 125
ScopeMeter® Test Tools
he Fluke 225C, 215C and 125
re the instruments of choice for
maintenance specialists who deal
with industrial buses and networks
s well as general electronics. You
an verify the electrical integrity
f your bus and network physical
ayer, performing tests and getting
nswers to digital signalling issues
uickly and easily.
These instruments offer all
he functions found in the 120 or
90C Series, plus added measurement capabilities for industrial
networks such as Profi®, Foundaion™, Modbus®, CAN-bus, AS-i bus,
RS-485 and more.
Bus Health physical layer appliation measures critical digital
ignal amplitude, time and noise
r distortion characteristics. Find
errors like signal attenuation and distortion caused by improper cable connections, bad
contacts, incorrect grounding, and missing or superfluous terminators. Signal integrity analysis is extended with the eye-pattern mode. A waveform display is built over
successive signal passes to give you a visual indication of overall signal quality, noise
levels, and signal jitter.
• Critical bus physical layer amplitude, time and
noise or distortion measurements
• Compare measurement results to limits defined by
the industry standard
• Display clear “good”, “weak” or “bad” indicators.
• Eye pattern mode to visually inspect waveforms
quality of transmitted data packets
• 215C or 225C with isolated inputs perform floating
differential measurements on balanced two wire
bus systems
• 125 dual input measurements performed relative to
common reference point
• BHT190 breakout adapter set DB9, RJ45 and M12
simplify probing onto bus signal connectors
Sample screens
Measure critical signal characteristics, compare to
industry standard.
Use “eye” diagrams to inspect for issues like signal
noise, distortion and other common disturbances.
Recommended accessories
BHT190
i30S
Bus Health Test Adapter,
DB-9 and M-12
AC/DC
Current Clamp
See page 61
Specifications
Fluke 225C
(200 MHz 199C)
Fluke 215C
(100 MHz 196C)
Fluke 125
(40 MHz 124)
Dual isolated inputs for differential bus system probing
•
On screen bus system probe connection diagrams
•
Bus Health AS-i
Physical
CAN-bus (ISO-11898) (DeviceNet)
Layer
Standards Interbus S (EIA-485)
ControlNet (61158 type 2)
•
•
•
•
i410
•
AC/DC
Current Clamp
See page 61
•
Modbus (EIA-232, EIA-485)
•
•
Foundation Fieldbus H1 (61158 type 1)
•
•
Profibus DP (EIA-485), PA (61158 type 1)
•
•
Ethernet 10Base2 (coax), 10BaseT (UTP)
•
•
Ethernet 100BaseT (100 Mb/s)
•
RS-232 (EIA-232), RS-485 (EIA-485)
Measured parameters
Eye diagram “qualitative” waveform analysis
BusHealth breakout adapter set
•
•
Bias Voltage Level, signal amplitude,
pulse width or baud rate, rise/ fall time, jitter,
signal distortion, noise HF, noise LF, in-band
noise
•
Baud rate, rise/fall
time, high level,
low level, distortion,
amplitude, jitter
BHT190 included
BHT190 optional
Resources
Go to www.fluke.com/scopemeterfaqs for answers to frequently asked
questions.
Ordering information
Included accessories
Test lead set, battery
charger/line voltage
adapter, battery pack
(installed), getting
started guide, multilingual users manual
on CD.
Models
FLUKE-225C/003
Color ScopeMeter (200 MHz, 2.5 GS/s) with Bus Health test capabilities built-in
FLUKE-225C/003S
Color ScopeMeter (200 MHz, 2.5 GS/s) with Bus Health test capabilities built-in,
with SCC190 kit
FLUKE-215C/003
Color ScopeMeter (100 MHz, 1 GS/s) with Bus Health test capabilities built-in
FLUKE-215C/003S
Color ScopeMeter (100 MHz, 1 GS/s) with Bus Health test capabilities built-in, with
SCC-kit
FLUKE-125
Industrial ScopeMeter, Bus Health, Power & Harmonics
FLUKE-125S
Industrial ScopeMeter, Bus Health, Power and Harmonics with SCC-Kit
For more information, go to www.fluke.com/scopemeter
Check price and availability at
www.fluke.com/wtb
ScopeMeter Test Tools
43
Fluke Thermal Imaging
Find it, fix it, fast
Superior image quality
Just pick up a Fluke imager and you’ll immediately see the difference. Fluke delivers the clear, crisp images needed to find and fix
problems fast.
• Industry leading thermal sensitivity (NETD) enables you to
identify the small temperature differences that could indicate
big problems
• Even the smallest details become visible with the large, widescreen full VGA color LCD display
• Patented IR-Fusion®
Easy to use
When you pick up a tool, you need it to operate and deliver results
without having to read a heavy manual
• Intuitive, three-button menu is easy to use… simply navigate
with the push of a thumb
• Add comments quickly and easily with voice annotation feature
for precise image viewing control
Rugged
Tools are meant to be used, and
Fluke thermal imagers are designed
to reliably operate in the toughest
environments.
• Engineered and tested to
withstand a 2 m (6.5 ft) drop—
when was the last time you
dropped a tool? See the proof at
www.fluke.com/rugged
• Use in ambient temperatures as low as -10 °C (14 °F) and high as +50 °C (122 °F)
• Protected by two-year warranty, with one- or two-year extended warranties available
Ask your Fluke representative for more details.
IR-Fusion® Technology
Not all fusion is created equal
Infrared images alone can be difficult to
understand, which is why Fluke pioneered
IR-Fusion, a revolutionary marriage of visible and infrared images never before seen
in commercial or industrial thermal imagers.
Automatically capturing a visible image with
every infrared image allows you to always
know exactly what you’re looking at.
Don’t be fooled by imitators. Patented
IR-Fusion is the only solution with physical parallax correction, enabling the perfect
alignment and smooth blending of both
infrared and visible images. While many
manufacturers have attempted to duplicate
Fluke IR-Fusion, none have been able to
match it. Turn to Fluke IR-Fusion to deliver
the industry’s best thermal images.
IR-Fusion viewing modes
Full IR
Alpha Blending
Full Visible Light
Application tips
Electric motors
and pumps
Hot spots may
be an early indicator of motor
winding problems. Elevated
temperatures
can damage
winding insulation, resulting
in operational
inefficiencies
and premature
motor failure. An
overheated motor may be an indication of an underrated motor in the
application, insufficient cooling or
electrical power problems.
Bus bars and
fuse boxes
Temperature
differences
between phases
may indicate
unbalanced
loads, harmonics, component
problems, bad
connections
or bad wiring.
These conditions can result
in increased
energy cost and can damage cables
or machines or possibly cause fire.
Even small temperature differences
between phases should be investigated to determine the root cause.
Residential and
commercial
energy loss
Missing or
improperly
installed insulation, moisture,
and air leaks
reveal opportunities for
property owners
to lower their
energy costs.
Save time and
money by finding problems fast and
ensuring repairs are done correctly.
Resources
To request more information,
or a demonstration, or to order,
call 1-800-760-4523 (U.S. only),
all other regions 1-425-446-4620.
Picture in Picture
44
Thermal Imaging
IR/Visible Alarm
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/thermal_imaging
Fluke SmartView® Software
Analysis and reporting software
Palette samples
Fluke palette options (six of
16 available, varies by model)
Amber
Powerful
Everything you need for analysis and
reporting.
• Extensive annotation, editing and
viewing options with full IR-Fusion®
capabilities
• Multiple reporting options and templates
and 3D-IR™ for unique 3D analysis
Easy to use
• SmartView tools and controls allow easy
access to editing functions and its easy
drag and drop text annotation feature
• Report Wizard guides you through automatic, professional report generation
Included with every imager
Fluke includes SmartView software with
unlimited licenses and lifetime upgrades
with every thermal imager
• No need to pay extra for a professional
software solution
SmartView® system
requirements
Software requirements
• Windows® XP SP2/Vista/7
• A web browser for product registration
and web updates
• Internet Explorer 5.0 or newer
• 512 MB of RAM minimum (1 GB for Vista
or 7)
• 360 MB of hard disk space for product
installation
• Microsoft® Word 2007 for report template modification (optional)
Hardware requirements
• Memory card reader to transfer images
to computer (included)
• 512 MB RAM (1GB for Vista), not including the space requirements for web
browser and Microsoft® Word
• 16-bit color, 1024x768 resolution video
or better
• CD-ROM drive for installing SmartView
software
Blue-red
Grey
Fluke Training Solutions
Getting started with Fluke Ti Thermal Imagers
High contrast
Unsure where to begin with your new thermal imager?
Don’t worry. Fluke utilizes an
extensive network of industry
experts to deliver a full portfolio
of training solutions.
• Free in-box training DVD:
This convenient training
solution provides a general
introduction to thermal imaging, product information, and
common applications.
• Free online webinars: Fluke
offers both pre-recorded and
live webinars to meet the needs
of busy professionals. Visit
www.fluke.com/titraining for
course listings and schedules.
• Hands-on training seminars:
Join us for one of our many local seminars where Fluke Thermography experts will
teach basic thermography with hands-on demonstrations.
Fluke authorized training
Go to www.fluke.com/titraining for schedules.
is provided by our partner,
• Advanced training: For advanced thermography (Level I to
Level III) and application specific training either online, in
the classroom or at your site, sign up through Fluke authorized, independent training partners. Visit www.fluke.com/
titraining for training options and schedules.
For more information, go to www.fluke.com/thermal_imaging
Ironbow
Hot metal
Check price and availability at
www.fluke.com/wtb
Thermal Imaging
45
Ti Series Industrial Thermal Imagers
The ultimate tools for troubleshooting and maintenance
optional telephoto lens
The perfect tools to add to your problem solving arsenal. Built
for tough work environments, these high-performance, fully
radiometric imagers are ideal for troubleshooting electrical systems, electro-mechanical equipment, process equipment, HVAC/R
equipment and others.
• Enhanced problem detection and analysis capabilities with
patent-pending IR-Fusion® Technology—only available from
Fluke
• Optimized for field use in harsh work environments
– Engineered and tested to withstand a 2 m (6.5 ft) drop
– Withstands dust and water—tested to an IP 54 rating
– Innovative protective lens cover protects the lens when
not in use
• Delivers the clear, crisp images needed to find problems fast
– Identify even small temperature differences that could
indicate problems with excellent thermal sensitivity (NETD)
– Even the smallest details become visible with the large,
widescreen full color LCD display
• Intuitive, three-button menu is easy to use... simply navigate
with the push of a thumb
Specialty models
Find problems faster with
Fluke thermal imagers.
Turn to the high performance Fluke
FlexCam® line when you need a
5 inch high-contrast LCD and superior on-imager analysis capabilities.
Images stored on a 1 GB compact
flash card can be downloaded to a
computer with included USB cable or
card reader. Offers video out for live
sharing of thermal images. Additional lenses are available. Fluke
puts powerful technology within
your reach.
See page 44 for IR-Fusion Technology—only available from Fluke.
See page 48 for recommended accessories.
Specifications
Features
Temperature measurement range
(not calibrated below -10 °C)
Temperature measurement accuracy
On-screen emissivity correction
On-screen reflected background
temperature compensation
On-screen transmission correction
Image capture frequency
Detector type
Thermal sensitivity (NETD)
Field of view (standard lens)
Spatial resolution (IFOV)
Optional telephoto infrared lens
Optional wide-angle infrared lens
Standard palettes
Ultra contrast palettes
IR Fusion®
Color alarms (user selectable)
Voice annotation
Storage medium
Export file formats w/included
SmartView® Software
Batteries
AC battery charging
AC operation
Enclosure rating
Drop tested
Warranty
TI32
-20 °C to +600 °C
(-4 °F to + 1112 °F)
TI25
-20 °C to +350 °C
(-4 °F to + 662 °F)
± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
Ti10
-20 °C to +250 °C
(-4 °F to + 482 °F)
± 5 °C or 5 % (at 25 °C nominal,
whichever is greater)
Yes
Yes
Yes
60 Hz or 9 Hz refresh rate depending on model
320 X 240 Focal Plane Array,
160 X 120 Focal Plane Array, uncooled
uncooled microbolometer
≤ 0.05 °C at 30 °C target temp.
≤ 0.1 °C at 30 °C target temp.
≤ 0.2 °C at 30 °C target temp.
(50 mK)
(100 mK)
(200 mK)
Field of View: 23 ° x 17 °; Minimum Focus Distance: 15 cm (approx. 6 in)
1.25 mRad
2.5 mRad
Yes
Yes
Ironbow, Blue-Red, High Contrast,
Ironbow, blue-red, high contrast,
Ironbow, blue-red, high contrast,
Amber, Amber Inverted, Hot Metal,
amber, hot metal, grey
grey
Grayscale, Grayscale Inverted
Ironbow Ultra, Blue-Red Ultra,
High Contrast Ultra, Amber Ultra,
Amber Inverted Ultra, Hot Metal
Ultra, Grayscale Ultra, Grayscale
Inverted Ultra
Yes
High-temperature alarm
60 seconds maximum recording time per image; reviewable playback
on imager
SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual
images each with 60 seconds voice annotations, or 3000 basic bitmap (.bmp) images, or 3000 jpeg (.jpeg)
images; transferrable to PC via included multi-format USB card reader
Resources
Hands-on training, Webinars, virtual
demos and more.
www.fluke.com/titraining
This tool will help determine the
return on investment of a Fluke
Thermal Imager.
www.fluke.com/roi
BMP, DIP, GIF, JFIF, JPE, JPEG, JPG, PNG, TIF, and TIFF
Two Lithium Ion rechargeable
smart battery packs with 5-segInternal rechargeable battery pack (included)
ment LED Display to show charge
Battery life: 3-4 hours
level. Battery life: 4+ hours;
Battery charge: 2.5 hours to full charge
Battery charge: 2.5 hours to full
charge
Two-bay AC battery charger
AC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included),
(110 V ac to 220 Vac, 50/60 Hz)
charges battery while imager is operating or turned off, ac mains
(included), or in-imager charging,
adapters included
ac mains adapters included
AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains adapters included
IP54
2 m (6.5 ft)
Two-year
To download detailed specifications for these products go to www.fluke.com/tispecs
Ordering information
Included accessories
In-box training DVD, SmartView® analysis and reporting software, 2 GB
SD memory card, multi-function memory card reader, hard carry case,
soft carry case, hand strap, two external smart rechargeable batteries, ac
charger/power supply.*
*Included accessories vary by model.
AC adapter, video cable, 1 GB compact flash card, compact flash card
reader and USB cable, PCMCIA compact flash card adapter, SmartView
reporting and analysis software, two rechargeable battery packs, battery
charger, neck strap, heavy duty carrying case and users manual on CD.
46
Thermal Imaging
Models
FLK-Ti25 9HZ
Thermal Imager
FLK-Ti10 9HZ
Thermal Imager
FLK-Ti32 9HZ
Industrial-Commercial Thermal Imager
FLK-Ti32 60HZ
Industrial-Commercial Thermal Imager
FLK-Ti40FT-20
IR FlexCam Thermal Imager
FLK-Ti45FT-20
IR FlexCam Thermal Imager
FLK-Ti50FT-20
IR FlexCam Thermal Imager
FLK-Ti55FT-20
IR FlexCam Thermal Imager
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/thermal_imaging
Ti Series Buildings Thermal Imagers
Optimized for energy audits and moisture detection
The ultimate tools for energy audits, building maintenance, restoation and remediation.
• Enhanced problem detection and analysis capabilities with
patent-pending IR-Fusion® Technology—only available from Fluke
• Optimized for field use
– Engineered and tested to withstand a 2 m (6.5 ft) drop
– Withstands dust and water—tested to an IP 54 rating
– Innovative protective lens cover protects the lens when
not in use
• Delivers the clear, crisp images needed to find problems fast
– Identify even small temperature differences that could
indicate problems with excellent thermal sensitivity (NETD)
– Even the smallest details become visible with the large,
widescreen full color LCD display
• Intuitive, three-button menu is easy to use... simply navigate
with the push of a thumb
ee page 44 for IR-Fusion Technology—only available from Fluke.
TiR32 shown with
optional wide angle lens
See page 48 for recommended accessories.
Specialty models
FlexCam® Thermal Imagers
The experts’ choice for
building diagnostics
The Fluke TiR3FT and TiR4FT Thermal
Imagers are for professionals demanding the best and most thorough
solutions in building diagnostics applications. The Fluke TiR-Series provides
the industry’s largest LCD to view
on-camera images, augmented with
the innovative IR-Fusion® Technology
to better pinpoint building problems.
IR-Fusion is the overlay of IR and visible images, allowing one to clearly
identify critical points within the
thermal image.
Specifications
Features
Temperature measurement range
(not calibrated below -10 °C)
Temperature measurement accuracy
On-screen emissivity correction
On-screen reflected background
temperature compensation
On-screen transmission correction
Image capture frequency
Detector type
Thermal sensitivity (NETD)
Field of view (standard lens)
Spatial resolution (IFOV)
Optional telephoto infrared lens
Optional wide-angle infrared lens
Standard palettes
Ultra contrast palettes
IR Fusion®
Color alarms (user selectable)
Voice annotation
Storage medium
Export file formats w/included
SmartView® Software
Batteries
AC battery charging
AC operation
Enclosure rating
Drop tested
Warranty
TIR32
-20 °C to +150°C
(-4 °F to + 302 °F)
TIR1
TiR
-20 °C to +100 °C (-4 °F to + 212 °F)
± 2 °C or 2 % (at 25°C nominal, whichever is greater)
± 5 °C or 5 % (at 25°C nominal,
whichever is greater)
Yes
Yes
Yes
60 Hz or 9 Hz refresh rate depending on model
320 X 240 Focal Plane Array,
160 X 120 Focal Plane Array, uncooled
uncooled microbolometer
≤ 0.05 °C at 30 °C target temp.
≤ 0.07 °C at 30 °C target temp.
≤ 0.1 °C at 30 °C target temp.
(50 mK)
(70 mK)
(100 mK)
Field of view: 23 ° x 17 °; minimum focus distance: 15 cm (approx. 6 in)
1.25 mRad
2.5 mRad
Yes
Yes
Ironbow, Blue-Red, High Contrast,
Ironbow, blue-red, high contrast,
Ironbow, blue-red, high contrast,
Amber, Amber Inverted, Hot Metal,
amber, hot metal, grey
grey
Grayscale, Grayscale Inverted
Ironbow Ultra, Blue-Red Ultra,
High Contrast Ultra, Amber Ultra,
Amber Inverted Ultra, Hot Metal
Ultra, Grayscale Ultra, Grayscale
Inverted Ultra
Yes
Dew point-temperature alarm
60 seconds maximum recording time per image;
reviewable playback on imager
SD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and
linked visual images each with 60 seconds voice annotations, or 3000 basic bitmap (.bmp) images,
or 3000 jpeg (.jpeg) images; transferrable to PC via included multi-format USB card reader
BMP, DIP, GIF, JFIF, JPE, JPEG, JPG, PNG, TIF, and TIFF
Two Lithium Ion rechargeable
smart battery packs with 5-segInternal rechargeable battery pack (included)
ment LED Display to show charge
Battery life: 3 to 4 hours
level. Battery life: 4+ hours;
Battery charge: 2.5 hours to full charge
Battery charge: 2.5 hours to full
charge
Two-bay ac battery charger
AC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included),
(110 V ac to 220 V ac, 50/60 Hz)
Charges battery while imager is operating or turned off,
(included), or in-imager charging,
ac mains adapters included
ac mains adapters included
AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains adapters included
IP54
2 m (6.5 ft)
Two-year
Fluke TiS Building
Diagnostics Thermal Imaging
Scanner
The new Fluke TIS is
the top-performing
imager in its price
class and meets the
proposed RESNET
infrared inspection
standards.
• 120 x 120 resolution
• Largest display in
price class, 30 %
larger than comparable models
• Award winning design, built rugged
to withstand 2 m (6.5 ft) drop
Resources
Thermal imaging equipment
solution center
These tools can help you find out more
about thermal imaging whether you
currently own a thermal imager or are
considering a purchase.
www.fluke.com/tisolutions
To download detailed specifications for these products go to www.fluke.com/tispecs
Ordering information
Included accessories
In-box training DVD, SmartView® analysis and reporting software,
2 GB SD memory card, multi-function memory card reader, hard carry
case, soft carry case, hand strap, two external rechargeable batteries, ac
charger/power supply and users manual.*
*Included accessories vary by model.
AC adapter (TiR4FT only), video cable, 1 GB compact flash card, compact flash card reader and USB cable, PCMCIA compact flash adapter,
SmartView reporting and analysis software on CD, two rechargeable
battery packs, battery charger, neck strap, heavy duty carrying case and
users manual on CD.
Models
FLK-TiR32 9HZ
Building Diagnostics Thermal Imager
FLK-TiR32 60HZ
Building Diagnostics Thermal Imager
FLK-TIR1 9HZ
Thermal Imager
FLK-TIR 9HZ
Thermal Imager
FLK-TiR3/FT-20
IR FlexCam BD Thermal Imager
FLK-TiR4/FT-20
IR FlexCam BD Thermal Imager
FLK-TiS 9HZ
IR BD Thermal Imager
For more information, go to www.fluke.com/thermal_imaging
Check price and availability at
www.fluke.com/wtb
Thermal Imaging
47
Thermal imaging resources from Fluke
Everything you need to use a Fluke thermal imager
If you currently own a Fluke thermal imager
or are considering a purchase, please visit
the Fluke Thermal Imaging Resource site at
www.fluke.com/titools.
Learn more about the value of thermal
imaging and why Fluke thermal imagers
and SmartView® software are the best solutions on the market today.
Watch a video, take a virtual demo, and
view or download other useful information
and tools.
Product demos
Recommended accessories
BOOK-ITP
FLK-LENS/TELE1
Introduction to
Thermography
Principles Book
Telephoto Infrared
Lens (Ti32 and
TiR32 only)
Find the thermal imager that best fits
your application
Go to www.fluke.com/select. Use our
online product selection guide to find out
the best Fluke thermal imager for your
application.
FLK-LENS/WIDE1
TI-CAR-CHARGER
Wide-Angle Infrared Lens
(Ti32 and TiR32 only)
Thermal Imager Car Charger
(all models except FlexCam)
Building Inspection with a Fluke
thermal imager—a video
TI-VISOR
TI-SBP3
Thermal Imager Sun Visor
(all models except FlexCam)
Smart Battery Pack
(Ti32 and TiR32 only)
SmartView software demo
Sample applications
Moisture detection: Accurately detect
moisture behind interior walls, in ceilings,
and under carpets.
Mold remediation: Control mold by
revealing undetected sources of moisture.
48
Thermal Imaging
TI-SBC2
103232
Charging Base
(Ti32 and TiR32 only)
Anti-glare Hood
(FlexCam models only)
104543
TI-SBC
Car Charger
(FlexCam models only)
Battery Charger
(FlexCam models only)
Roofing: Detect water-saturated insulation
in flat-roof systems to locate damaged
portions of roofing structure.
Energy audits: Perform residential and
commercial energy audits by scanning for
heating or cooling (energy) loss, moisture
invasion, and HVAC/R problems.
TI-SBP
TI-TRIPOD
Rechargeable Battery Pack
(FlexCam models only)
Ti Tripod Mounting Base
(all models except FlexCam)
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/thermal_imaging
Fluke 560 Series
Infrared Thermometers
Fluke 566 and 568 IR and Contact
Thermometers
Just when you thought advanced IR temperature
measurement should be easier! With a straightforward user interface and soft-key menus, the
Fluke 566 and 568 make even complex measurements easy. With just a few pushes of a button
you can easily adjust emissivity, start data logging, or turn on and off alarms. With a rugged,
easy-to-use design, the Fluke 566 and 568
can stand up to tough industrial, electrical, and
mechanical environments.
• Measure up to 800 °C (1470 °F)
• Easily access advanced features with the softkey buttons and graphical display
• Measure smaller objects from further away
• Compatibility with most type-K thermocouples
• Confidently measure more surfaces, with
adjustable emissivity and built-in materials
table
• Log and download measurements for reporting
(568)
• Two levels of backlight
• Audible and visual alarms alert you to measurements outside of set limits
• Min, Max, Avg, and Dif functions
• Includes KTC bead probe
• 1 % measurement accuracy
• Versatile interface with six languages
Specifications
Models
Infrared temperature range
Fluke 561
Fluke 566
Fluke 568
Fluke 68IS
Fluke 62
-40 °C to 535 °C
(-40 °F to 1022 °F)
-40 °C to 650 °C
(-40 °F to 1200 °F)
-40 °C to 800 °C
(-40 °F to 1470 °F)
-32 °C to 760 °C
(-25 °F to 1400 °F)
-30 °C to 500 °C
(-20 °F to 932 °F)
greater of ± 1 %
or ± 1 °C (2 °F)
greater of ± 1.5 %
or ± 1 °C (2 °F)
50:1
10:1
Up to 7.5 m (25 ft)
Up to 2 m (6 ft)
Accuracy
greater of ± 1 % or ± 1 °C (2 °F)
Distance to Spot (D:S)
12:1
30:1
50:1
Sighting
Typical distance to target
Up to 2.5 m (7 ft)
Up to 4.5 m (15 ft)
Up to 7.5 m (25 ft)
Thermocouple K
-40 °C to 550 °C
(-40 °F to 1022 °F)
RTD
-270 °C to 1372 °C
(-454 °F to 2501 °F)
Number of on-board
memory locations
20
The Fluke 561 combines
the temperature measurement functions
that professionals
need for most HVAC
and industrial jobs,
all in one tool.
• Pipe probe for
superheat and
sub-cooling and
other contact
and ambient
measurements
• Min, Max and Dif functions help you
quickly identify problems
• Scan large areas or small objects
quickly and efficiently
Fluke 61 Infrared
Thermometers
• Easy to use one button
operation
• Easy targeting with bright
laser
• Shock-absorbing molding
increases ruggedness
• Two-year conditional
warranty
• Temperature measurement
range up to 275 °C (525 °F)
• 8:1 optics
• Accurate to within ± 2 % of reading
or 2 °C, whichever is greater
Recommended accessories
-40 °C to 260 °C
(-40 °F to 500 °F)
99
PC download and software
12
Yes,
with FlukeView®
Forms
Soft-key feature menu
navigaton
Yes
Min/Max/Avg/Dif
Min/Max/Dif
Min/Max/Avg/Dif
English, French, Chinese,
Spanish, Portuguese,
German user interface
Min/Max/Avg/Dif
Max
Yes
Material type adjustment
(emissivity)
Hi/Med/Lo
Material table or 0.1 to 1.00 by 0.01
Two levels of backlight
0.1 to 1.00 by 0.01
80PK-11
80PK-27
Pipe Clamp Probe
See page 58
Industrial Surface
Temperature Probe
See page 58
Preset to 0.95
Yes
High and low alarms
High and low alarms
Hazardous location
approval
High and low alarms
FM approved
intrinsically safe
Hands-free logging
Yes
Battery
Included case
Fluke 561 Infrared and
Contact Thermometer
Laser point
Probe type
Contact temperature range
Specialty models
2 AA
Hard case (except
561/R and 561/P)
Warranty
9V
Hard case
Soft case
Two-year
80PK-10
80PK-18
Pipe Clamp
Temperature Probe
See page 58
Pipe Clamp
Temperature Probe
See page 54
Ordering information
Included accessories
Models
USB cable, FlukeView® Forms software, thermocouple K-type bead probe,
carrying case, two AA batteries, users manual, quickstart guide.
FLUKE-568
Infrared Thermometer
Thermocouple K-type bead probe, carrying case, two AA batteries, users
manual and quickstart guide.
FLUKE-566
Infrared Thermometer
Thermocouple K-type pipe probe, carrying case, two AA batteries, users
manual.
FLUKE-561
Infrared Thermometer
9 V battery, instruction sheet.
FLUKE-61
Infrared Thermometer
For more information, go to www.fluke.com/thermometers
Check price and availability at
www.fluke.com/wtb
Thermometers
49
Fluke 62 Mini Infrared Thermometer
Non-contact temperature measurement
The Fluke 62 Mini non-contact thermometer is the perfect
introduction to infrared (IR) thermometers for the professional.
With the best accuracy in its class, the Fluke 62 mini offers
quick and reliable surface temperature readings. This compact
and portable tool enables professionals to diagnose heating and
ventilation problems and monitor the temperature of electrical
motors and electrical panels without contact.
• Accurate to within ± 1.5 % of reading or ± 1.5 °C
• Temperature measurement range up to 500 °C (932 °F)
• 10:1 optics
• Backlit display for poorly lit areas
• Laser sighting
• Dual display shows current and max measurements
simultaneously
Fluke 50 Series II Thermometers
Lab accuracy in a field thermometer
Specialty models
Fluke 570 Series Infrared
Thermometers
The Fluke 572 and 574 are
ideal diagnostic tools for
maintenance professionals requiring accurate
temperature readings at
all distances. Predictive
maintenance professionals requiring analysis
and documentation use
the 574 model, with
100-point data logging with the included
software for graphing and
analysis for follow-up reporting and
documentation.
• Backlit display for poorly lit areas
• Displays last ten temperature
readings
• Enhanced optics (distance to spot
ratio up to 60:1)
Intrinsically safe model on page 39.
All models offer:
• Laboratory accuracy: ± (0.05 % + 0.3 °C)
• Large backlit dual display
• Min/Max/Avg
• Electronic offset function maximizes overall accuracy
• Supports a wide range of thermocouple types
• Temperatures displayed in °C, °F, or Kelvin (K)
Recommended kits
62/T+PRO/1AC-II
Powerful data logging capabilities
The Fluke 53 II B and 54 II B can log up to 500 points of data to
internal memory.
• User-adjustable recording intervals
• Real-time clock captures the exact event time
• Recall function lets logged data be easily reviewed
• Download data to optional FlukeView® PC software
• 62 Non-contact
Thermometer
• T+RO Electrical Tes
• 1AC-II Voltage Dete
• Carrying case
T5-600/62/1AC-II Kit
• Fluke 62 Mini IR
Thermometer
• Fluke T5-600 Vol
Electrical Tester
• 1AC-II Voltage
Detector
• Carrying case
Features
Features
Thermocouple types
54 II B
53 II B
52
51
K,J,T,E,N,R,S
K,J,T,E,N,R,S
K,J,T,E
K,J,T,E
Dual
Single
Dual
Single
Time of day
Time of day
Number of inputs
Time stamp
• Fluke 62 Mini IR
Thermometer
• Fluke 322 Clamp Me
• 1AC-II Voltage Dete
• Test leads
• Carrying case
Ordering information
Included accessories
Models
Storage pouch and instruction sheet.
FLUKE-62
Mini Infrared Thermometer
FLUKE-62/T+PRO/1AC
IR Thermometer, Electrical Tester and Voltage Detector Kit
FLUKE-T5-600/62/1AC
IR Thermometer, Electrical Tester and Voltage Detector Kit
FLUKE-62/322/1AC
IR Thermometer, Clamp Meter and Voltage Detector Kit
FLUKE-411D/62
IR Thermometer and Distance Laser Meter Kit
FLUKE-54-2-B
Datalogging Thermometer, Dual Input
FLUKE-53-2-B
Datalogging Thermometer, Single Input
FLUKE-52-2
Digital Thermometer, Dual Input
FLUKE-51-2
Digital Thermometer, Single Input
Bead thermocouple(s), batteries,
overview manual and instructional
guide on CD.
Thermocouple K probe (574), power
supply (574), RS-232 data cable (574),
data graphing, storage and analysis
software on CD (574), hard case, two
AA batteries, operator’s guide on CD.
62/322/1AC-II Kit
FLUKE-574-CF
Precision Infrared Thermometer w/Logging SW Close Focus
FLUKE-574
Precision Infrared Thermometer w/Logging SW
FLUKE-572-CF
Precision Infrared Thermometer with Close Focus Option
FLUKE-572
Precision Infrared Thermometer
62-411D Kit
• Fluke 62 Mini IR
Thermometer
• Fluke 411D Lase
Distance Meter
• Soft pouch for
each model
Check price and availability at
www.fluke.com/wtb
50
Thermometers
For more information, go to www.fluke.com/thermometers
Hawk IR C-Range IR-Windows
Got switchgear?
Use arc-resistant IR Windows with
Quadraband™ optic technology
Applications
Infrared windows mount into panel doors and covers for switchgear, transformers, buss bars and other live electrical equipment,
allowing thermal, ultraviolet, visual and fusion technologies to be
used without exposing personnel to live equipment.
• Reduce the risk associated with electrical thermography
• Reduce labor required to inspect your switchgear from three
heads to one
• Stay safety compliant with
NFPA 70E and other safety
protocols and leave the panels
closed
• Extend the life of your equipment with more frequent IR
scans
• Easy to install
• Durable enough to withstand
extreme outdoor conditions yet
practical for indoor applications
as well
Fluke CLKT
Fluke CLKTO
Fluke 1524/1523 Reference
Thermometers
The 1523/24 Reference Thermometers from the Hart Scientific Division
measure, graph, and record PRTs, thermocouples, and thermistors. You
can measure up to 0.3 seconds per sample and plot and scale trends
in real time. Both thermometers have memory for up to 25 readings
with statistics. The 1524 has 2 inputs with data logging memory for
15,000 measurements with date and time stamps.
Temperature probes are required for measurements and are sold
separately as accessories. The universal thermocouple adapter is
configurable for different thermocouple types and has memory for
calibration coefficients. Free IOToolkit software is included for updating password protected calibration information stored in 1523/1524
probe connectors.
Accuracies of selected readout/probe combinations including readout accuracy probe calibration and probe drift (± °C).
Features
Temperature
5616-12
Recommended accessories
Fluke 1524/1523
5616-12-P
5610-9-P
Precision PRT
305 mm x 6.35 mm
(12 in x .25 in)
Precision Thermistor
229 mm x 3.2 mm
(9 in x 1/8 in)
5610-9
-200 °C (-328 °F)
0.014
0 °C (32 °F)
0.021
0.009
100 °C (212 °F)
0.027
0.030
300 °C (572 °F)
0.040
420 °C (788 °F)
0.050
Equivalent temperature readout accuracy for measuring type K thermocouples is ± 0.24 °C (± 0.43 °F) from 0 °C to 1370 °C
(32 °F to 2498 °F) and ± 0.61°C (± 1.10 °F) from –200 °C to 0 °C (–328 °F to 32 °F). Additional errors for thermocouple accuracy
or calibration must be added separately.
2373-LTC
FLK80K1
Smart connector
with universal
TC adapter
80PK-1 Type K
Probe and adapter
(2373-LTC)
Ordering information
Included accessories
Models
IR Windows are supplied complete,
assembled and ready for installation.
In addition to the IR Window each
carton contains an installation CD,
self-adhesive drilling template, security
access key, warranty statement.
FLK-050-CLKT
50 mm (2 in) C-Range IR Window, Kwik Twist
FLK-075-CLKT
75 mm (3 in) C-Range IR Window, Kwik Twist
FLK-100-CLKT
100 mm (4 in) C-Range IR Window, Kwik Twist
FLK-075-CLKTO
75 mm (3 in) C-Range IR Window, Kwik Twist
12 V dc universal power supply,
RS-232 cable, NIST traceable
calibration certificate, technical manual
and 9940 I/O ToolKit software on CD,
three AA batteries, users guide.
FLUKE-1524
Thermometer Readout (2 inputs)
FLUKE-1523
Thermometer Readout (1 input)
TPAK, 2373-LTC, carrying case.
FLUKE-1524-P1
1524 Bundled with 5616 PRT
FLUKE-1523-P1
1523 Bundled with 5616 PRT
For more information, go to www.fluke.com
TPAK
Magnetic Meter Hanger
See page 62
Check price and availability at
www.fluke.com/wtb
Thermometers/IR-Windows
51
Fluke 810 Vibration Tester
Take a vibration expert along
Get answers now!
The Fluke 810 Vibration Tester is the
most advanced troubleshooting tool for
mechanical maintenance teams who
need an answer NOW. It is a unique new
kind of troubleshooting tool, engineered
to detect and evaluate the most common
mechanical problems.
The Fluke 810 Vibration Tester uses a
simple step-by-step process to report on
machine faults the first time measurements are taken, without prior machine
history.
Software
Viewer PC Software
• Store and track your data
• Generate diagnostic reports
and track the severity of your
machine’s condition
• Import and store JPEG and Fluke
IS2 thermal images
Use the Fluke 810 to:
• Easily determine the root cause, location and severity of common mechanical faults
• Efficiently prioritize and plan equipment repair or replacement
• Effectively deploy maintenance resources at the point of greatest impact
Simple 3 step process
The Fluke 810 helps you locate and diagnose common mechanical problems and
prioritize repair actions in three simple steps:
1. Setup: Vibration testing
2. Measure: The Fluke
3. Diagnose: Fix it right
has never been easier
810 fits easily into
the first time: With the
The Fluke 810 asks for
your maintenance
press of a button, the
basic machine informaroutine. Use it to quickly
Fluke 810 identifies the
tion you already know,
troubleshoot problems
root cause, its location,
like RPM and horseor monitor machine
and the problem’s
power. Its onboard Info
condition.
severity.
feature gives you field
tips for setting up and
taking measurements
like a pro.
Application tips
Breakthrough diagnostic
technology
The Fluke 810’s diagnostic technology
combines powerful algorithms with a
database of real-world measurement
experience, making the Fluke 810 the
most advanced troubleshooting tool for
mechanical maintenance teams.
Analyze most common equipment:
• Motors
• Fans and blowers
• Belt and chain drives
• Gearboxes
• Pumps
• Compressors
• Spindles
Specifications
Diagnostic specifications
Analysis for
Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston
pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston
compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles
Machine rotational speed range
200 rpm to 12000 rpm
Diagnosis details
Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited
peaks, spectra
IP rating
IP 54
4 channel, 24 bit
Dynamic range
128 dB
FFT resolution
800 lines
Battery
Lithium-ion, rechargeable, 8 hours operating life
Onboard storage capacity
2 GB internal micro SD card
Warranty
Three-years (tester), One-year (sensor and tachometer)
Sensor specifications
Sensor type
Tri-axial accelerometer , 100 mV/g (± 5 %, 25 °C)
Tachometer specifications
Tachometer type
Laser Diode Class 2
Ordering information
52
Included accessories
Models
Tri-axial accelerometer, magnet mount, mounting pad kit with adhesive, quickdisconnect accelerometer cable, laser tachometer with storage pouch, battery
pack with cable and adapters, shoulder strap, adjustable hand strap, Viewer PC
software, mini USB to USB cable, carrying case, training DVD, getting started
guide, quick reference guide, users manual on DVD.
FLUKE-810
Vibration
Resources
Interactive, selfpaced training
on DVD
Learn more about
the basics of
vibration and how
to fully utilize the
features and functionality of the
Fluke 810. Fluke has partnered with
Mobius Institute, an industry leader
in vibration training, to develop an
interactive training DVD included with
each Fluke 810.
Tester specifications
A/D converter
Detect the most common causes of
mechanical failure:
• Bearing problems
• Misalignment
• Unbalance
• Looseness
FLUKE-810 Vibration Tester
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/vibration
Accessories as tough
as your meter
TPAK Meter Hanger—
hang your meter from
magnetic surfaces and
free both hands
(see p. 62)
TL175 TwistGuard Test
Leads—get two category
ratings with one set of
test leads and a wire that
changes color when the
leads need to be replaced
AC285 SureGrip
Alligator Clips—SureGrip
rubber provides a
reliable, ergonomic
grip in slippery hands
(see p. 57)
When your job depends on your meter... your
meter depends on Fluke Genuine Accessories
(see p. 57)
53
Fluke cases and holsters
A premium meter deserves a premium case
C550
CXT80
•
•
•
CXT80
•
CXT170
•
•
•
•
•
•
•
•
•
•
•
C520A
The C550 and C1600 are large enough to hold accessories and multiple test tools
C550/C1600
•
•
•
•
•
C25
•
•
•
•
•
•
•
•
•
C33
•
C35
•
C43
C90
•
•
•
C115/C116
•
•
•
•
•
•
•
•
•
•
•
•
•
C800
Accessories
•
•
•
•
C100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
789
•
•
•
•
C789
54
•
•
C781
C510
•
•
•
•
•
•
•
•
•
•
C125
C101
•
28x
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
787
•
•
•
787
•
•
•
787
H5
C345 Soft Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 360 x 200 x
240 mm (14 x 8 x 9.5 in)
Hard cases
CXT Series Extreme Cases
• Models CXT80, CXT170, and CXT280 for
various meter compatibility
• Unbreakable, watertight, airtight, chemical resistant and corrosion proof
C800 Meter and Accessory Case
• Dimensions (HxWxD): 230 x 385 x
115 mm (9 x 15 x 4.5 in)
C20 Hard Case
• Made of polyprophylene
• Dimensions (HxWxD): 256 x 154 x
106 mm (10 x 6.1 x 4.2 in)
C101 Hard Case
• Exterior dimensions (HxWxD): 305 x
360 x 105 mm (12 x 14.2 x 4.1 in)
• Interior dimensions (HxWxD): 230 x
290 x 65 mm (9 x 11.5 x 2.5 in)
C100 Universal Carrying Case
• Dimensions (HxWxD): 397 x 346 x
122 mm (15.7 x 13.6 x 4.8 in)
C1600 Gear Box
• Includes five hook and loop straps to
wrap cords and test leads
• Dimensions (HxWxD): 260 x 390 x
200 mm (10 x 15 x 7.8 in)
Leather cases
C520A Leather Tester Case
• Dimensions (HxWxD): 256 x 154 x
106 mm (10 x 6 x 4 in)
C510 Leather Meter Case
• Dimensions (HxWxD): 287 x 179 x
106 mm (11 x 7 x 4 in)
Holsters
•
•
18x
•
CXT280
C12A
1503/1507/1577/1587
725/726
•
T3/T5
718
•
787/789
714/715/716/717
•
741/743/744
712/713
•
705/707
330 Series
•
The perfect case for carrying a wide range of Fluke handheld test tools and accessories
C345
C50
•
321/322
•
63/66/68
•
50 Series II
287/289/187/189
•
120 Series
233
•
43B
80 Series III/83V
87V/89 IV
•
39/41B
175/177/179
•
C280
27 II/28 II/27
20/70 Series
114/115/116/117
110/111/112
10/11/12/12B
C12A Meter Case
• Made of vinyl
• Dimensions (HxWxD): 172 x 128 x 38 mm
(6.8 x 5 x 1.5 in)
C75 Accessory Case
• Made of vinyl
• Dimensions (HxWxD): 179 x 103 x 26 mm
(7 x 4 x 1 in)
C50 Meter Case
• Made of vinyl
• Dimensions (HxWxD): 192 x 90 x 38 mm
(7.56 x 3.5 x 1.5 in)
C25 Large Soft Case for DMMs
• Made of vinyl
• Dimensions (HxWxD): 218 x 128 x 64 mm
(8.6 x 5 x 2.52 in)
C90 Soft Case for DMMs
• Made of vinyl
• Dimensions (HxWxD): 205 x 90 x 72 mm
(8 x 3.5 x 2.8 in)
C35 Soft Carrying Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 220 x 140 x
65 mm (8.7 x 5.5 x 2.6 in)
C23 Soft Carrying Case
• Made of durable vinyl
• Dimensions (HxWxD): 225 x 95 x 58 mm
(8.9 x 3.75 x 2.3 in)
C280 Soft Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 230 x 185 x
65 mm (9 x 7.3 x 2.6 in)
Selection
Guide
C510
C115 Soft Carrying Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 240 x 205 x
75 mm (9.5 x 8 x 3 in)
C116 Soft Carrying Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 240 x 230 x
65 mm (9.5 x 9 x 2.6 in)
C570 Soft Case
• Made of vinyl
• Dimensions (HxWxD): 240 x 89 to 170 x
56 mm (9.5 x 3.5 to 6.7 x 2.2 in)
C781 Meter Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 269 x 141 x 90 mm
(10.6 x 5.6 x 3.5 in)
C33 Soft Carrying Case
• Made of vinyl
• Dimensions (HxWxD): 280 x 115 x 55 mm
(11 x 4.5 x 2.2 in)
C789 Meter and Accessory Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 308 x 256 x
77 mm (12 x 10 x 3 in)
C43 Soft Carrying Case
• Made of durable polyester 600D
• Dimensions (HxWxD): 318 x 230 x
90 mm (12.5 x 9.1 x 3.5 in)
C550 Tool Bag
• Made of ballistic cloth with heavy-duty
hardware
• Dimensions (HxWxD): 333 x 513 x
231 mm (13 x 20.2 x 9.1 in)
Soft cases
50S/50D
C35
•
•
C10 Meter Holster
• Compatible with Fluke 10 Series
Multimeters
• Dimensions (HxWxD): 154 x 77 x 45 mm
(6 x 3 x 1.8 in)
H80M Protective Holster
• Includes a hanging magnet, general purpose hanger, and hook and loop straps
• Dimensions (HxWxD): 190 x 95 x 43 mm
(7.5 x 3.7 x 1.7 in)
H5 Electrical Tester Holster
• Dimensions (HxWxD): 192 x 90 x 38 mm
(7.5 x 3.5 x 1.5 in)
H3 Clamp Meter Holster
• Dimensions (HxWxD): 231 x 90 x 64 mm
(9 x 3.5 x 2.5 in)
H6 IR Thermometer Holster
• Dimensions (HxWxD): 302 x 178 x 57 mm
(11.9 x 7 x 2 in)
For more information, go to www.fluke.com/accessories
Fluke accessory sets and kits
Save money on our most popular accessories
TL220 Industrial Test Lead Set
TL223 Electrical Test Lead Set
•
•
•
•
•
•
•
•
Starter kit for industrial applications
TP220 has round, stainless steel tip
Includes 1 pair: AC220, TP220, TL222
CAT III 1000 V, CAT IV 600 V, 10 A
TLK-220 SureGrip™ Accessory
Kit with Meter Carry Case
Starter kit for electrical applications
TP1 has flat blades for wall sockets
Includes 1 pair: AC220, TP1, TL224
CAT III 1000 V, CAT IV 600 V, 10 A
•
•
•
•
•
Plunger style alligator clips
Large jaw alligator clips
Sharp test probes
Right to straight test leads
Zippered vinyl carry case with moveable divider
• Holds large DMMs
287/289/187/189
39/41B/43B
90 Series
120 Series
190 Series
321/322
330 Series
705/707
715
716/717
718
725/726
741/743
744
787/789
1587
1577
•
87V/233
TLK287
80 Series
Selection
Guide
179
•
•
•
•
•
•
•
175/177
Designed for electrical and electronics test
in today’s industrial environment
• SureGrip™ alligator clips, grabbers, hook
clips and industrial test probes
for dependable contact with a variety of
test points
• Magnetic hanger for suspension of your
DMM
• Temperature adapter with K-Type
thermocouple for direct temperature
measurement with your DMM’s
27 II/28 II/27
The perfect test lead kit for today’s electronics test and design
• Precision electronic probes with multiple
spring-loaded sharp tips to maximize
contact with SMD test points
• Micro-grabbers and leads to enable fine
SMD test
• Modular mini-alligator clips, grabbers,
leads, probes, and couplers for virtually
every electronics need
20/70 Series
TLK-225 SureGrip™ Master
Accessory Kit
114/115/116/117
TLK289 Industrial Master Test
Lead Set and Case
10/110 Series
TLK287 Electronics Master Test
Lead Set
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
116
TLK289
•
•
•
TL220
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TL223
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TL225
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TL238
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TL80A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TL81A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TL71
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TL76
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
80K-8, 80K-15,
80K-40
dc dc
only only
Plunger style alligator clips
Plunger style hook clips
Plunger style pincer clips
Large jaw alligator clips
Sharp test probes
Right to straight test leads
6-pocket storage pouch, keeps the
entire set together
For more information, go to www.fluke.com/accessories
T5 Tester Starter Kit
Getting started kit for electricians who
already own a Fluke T5 Tester.
• Test probes
• Large jaw alligator clips
• Zippered soft case
•
Accessories
55
Fluke test leads, probes and clips
The best leads for all your measurement needs
For electronic applications
For automotive applications
TP81 and TP82
• Stainless steel probe
pierces insulation
on 14, 16 and
18 gauge wire
• Design provides complete
insulation while working on fuel
injectors or sensors
• TP81 for use with modular test leads
(Fluke TL224)
• TP82 slips over probe tips (Fluke TL71)
• Rated to 60 V dc
TL80A Basic Electronic Test Lead Set
• 6 piece set with zippered case
• Probes, alligator clips and tip extenders
for electronic applications
• CAT II 300 V
TL910 Electronic
Test Probes with
Replacement Tips
• Small profile provides
accessibility
• Comes with 5 sets of
replaceable tips
• Replacement tips:
TP912
• CAT III 1000 V, 3 A
TP80 Electronic Test
Probes
• Tapered tip ideal for
probing electronic components or boards
• Removable guard for IC
probing
• CAT III 1000 V, 10 A
TP920 Test Probe
Adapter Kit
• IC test tip adapters,
extended tips, medium
alligator clips fit over
TL71 and TL75 test
lead sets
• IC test tip Adapter, 3 A
• Extended probe tip, 3 A
• Med. alligator clip, 5 A
• CAT II 300 V
TP88 Rigid
Backprobe Pin Set
• 2 inch long pins
pass between the
weather pack seal a
• Use with Fluke TL71
lead sets
• Rated to 60 V dc
TP40 Automotive
Back Probe Pin Set
• Set of five 1.5 inch
pins
• Rated to 60 V dc
• Provide an easy
connection past
weather pack seals to
connector conductors
• Use with Fluke TL71 or TL75 test
lead sets
TL82 Automotive
Pin & Socket
Adapter Set
• Collection of male
and female
adapters allows
you to make firm
connection to pin
and socket connect
• Adapters with flexible tips come in the
following sizes: 22, 20, 16 and 12
• Rated to 60 V dc
TLK281 Automotive Test Lead Kit
• Insulation piercing probes
• Suregrip silicone test leads
• Suregrip test probes
• Suregrip plunger style alligator clips
• Suregrip alligator clips
• Carrying case
TLK282 Deluxe Automotive Test Lead Kit
• Insulation piercing probes
• Set of five automotive back probe pins
• Suregrip silicone test leads
• Suregrip test probes
• Suregrip plunger style alligator clips
• Suregrip alligator clips
• Suregrip hook clips
• Carrying case
TL40 Retractable Probe
Assembly
• Retractable, insulated
sharp probe tip
• CAT III 300 V, 3 A
TL26A Telecom Test
Lead Set
• 5-way multipoint test
clips for telecommunications applications
• Flexible silicone insulated leads are heat
and cold resistant
• CAT I 30 V, 8 A
56
Accessories
High-voltage probes
80K-6, 80K-15, 80K-40 High Voltage Probes
• Allows a digital multimeter to measure up
to 6,000 volts peak, 15,000 volts peak and
40,000 volts peak respectively
• 1000:1 division ratio output when connected
to 10 MΩ multimeter
• Ground clip included
• Intended for low energy applications that are
referenced to ground
• 80K-15 (not available in Europe)
For more information, go to www.fluke.com/accessories
Fluke SureGrip™ accessories
As tough as your meter
SureGrip accessories provide a reliable grip in slippery hands.
Rubber-overmolded surfaces and finger-hugging curves give the
user a comfortable, steady hold on the accessory so they can
focus on making an accurate measurement.
Modular test leads and test probes (use test probes with test leads)
FTPL SureGrip™ Fused
Test Probes with Leads
• FTP Fused Test Probes
with built-in fuses for
added protection
• TL224 Silicone Insulated Test Leads
• CAT III 1000 V, CAT IV
600 V, 10 A
TL221 SureGrip™
Silicone Test Lead
Extension Kit
• Superior strain relief
• Includes two adapters
to extend leads 1.5 m
• CAT III 1000 V, 10 A,
CAT IV 600 V, 10 A
TL222 SureGrip™
Silicone Insulated
Test Leads
• Superior strain relief
• Recommended for use
with AC220, AC280,
AC283 test clips
• CAT III 1000 V, 10 A,
CAT IV 600 V, 10 A
TL224 SureGrip™
Silicone Insulated
Test Leads
• Superior strain relief
• 1.5 m silicone-insulated wire resists
heat and cold
• CAT III 1000 V, 10 A,
CAT IV 600 V, 10 A
FTP SureGrip™ Fused
Test Probes
• Built-in fuses for
added protection
• 2 mm threaded
probe tips include
removable 4 mm
lantern-style spring contacts
• Removable GS38 insulated IC caps for
probing closely spaced leads
• CAT III 1000 V, CAT IV 600 V, 10 A
TP1, TP2, TP4 and
TP38 Slim Reach™ Test
Probes
• Slender probe bodies
for probing closely
spaced or recessed
points
• TP1 has a flat blade
• TP2 has 2 mm diameter tip
• TP4 has 4 mm diameter tip
• TP38 has stainless
steel insulated probe
to help lessen the risk
of arc flash explosion
• CAT III 1000 V, 10 A, CAT IV 600 V, 10 A
TP220 SureGrip™ Industrial Test Probes
• Sharp, 1/2 inch stainless steel tip provides
reliable contact
• Flexible finger barrier
improves grip
• CAT III 1000 V, 10 A,
CAT IV 600 V, 10 A
Modular clips (use with test leads, includes one red, one black)
AC220 SureGrip™ Alligator
ator Clips
• Insulated, nickel plated
d jaws grip
objects up to 3/8 in.
• Blunt tip grabs round
screw heads
• CAT III 1000 V,
CAT IV 600 V, 10 A
AC72 Alligator Clips
• Slide-on style for test pro
• Jaws open to 8 mm
• For use with TL71 and
TL75 test lead and probe
sets
• CAT III 1000 V, 10 A, CAT IV 600 V, 10 A
AC283 SureGrip™ Pincer Clips
• 4.5 in. flexible, insulat
• Nickel plated pincers o
to .20 in.
• CAT III 1000 V,
CAT IV 600 V, 1 A
AC285 SureGrip™ Alligator Clips
• Multi-purpose tooth pattern
grips anything from fine gauge
wire to a 3/4 in. nut
• Nickel-plated steel jaws
• CAT III 1000 V,
CAT IV 600 V, 10 A
AC280 SureGrip™ Hook
• Profile narrows to .22 i
• Hook opening .20 in. a
.08 in. at base
• CAT III 1000 V,
CAT IV 600 V, 3 A
For more information, go to www.fluke.com/accessories
The new standard for safer
electrical measurements
TL175 TwistGuard™ Test Leads
• Probes meet new IEC 61010-031
requiremen
• Patented ex
sheath mee
CAT III 100
CAT IV 600
requirements
while providing the
flexibility
you need for CAT II measurements
• New WearGuard™ test lead wear
indicator that changes color when
leads are damaged and in need
of replacement
• Probes
always
show correct
category rating
for tip being
used
• Advanced strain relief exceeds
5,000 bend life
• TP175 probes fit standard test leads
y twist
Simpl handle
probe
ud
Shro s
drop
TL238 SureGrip™ Test Lead Set for
high energy environments
• Insulated tip
probes help
lessen risk
of arc flash
explosion
• Probe extenders keep
hands away
from live
current
• Includes one pair each, insulated
test tip probes, probe extenders and
TL224 Test Leads
• Probes and leads CAT III 1000 V,
CAT IV 600 V, 10 A, extenders CAT
III 1000 V 10 A
TL71 Premium DMM Test Lead Set
• Flexible silicone
insulated leads
are heat and cold
resistant
• Distinctive comfort
grip probes
• Recommended for
µV measurements
• CAT III 1000 V, 10 A, CAT IV 600 V,
10 A
TL75 Hard Point Test Lead Set
• Extremely hard
alloy tips resist
wear
• Distinctive comfort
grip probes
• 1.5 m PVC leads
• CAT III 1000 V,
10 A, CAT IV
600 V, 10 A
Accessories
57
Fluke Temperature accessories
Turn your digital multimeter into a thermometer
Other temperature accessories
80TK Thermocouple Module
• Converts K-Type thermocouple
signals into mV output
• Connects to DMM via
standard banana plugs
• Switch selectable °C or °F
• Range: -50 °C to 1000 °C
(-58 °F to 1832 °F)
• Includes 80PK-1 probe
80T-150UA Universal Solid State
Temperature Probe
• For measurement of air,
surface and non-corrosive
materials
• Measurement range:
-50 °C to 150 °C (-58 °F to 302 °F)
• Output: 1 mV/°C or 1 mV/°F (switch
selectable)
• Connects to DMM via standard banana
plugs
80AK-A DMM Adapter
• Adapts K-type thermocouple
mini-connector to dual
banana plug inputs
• Compatible with all Fluke
DMMs with temperature
measurement functions
• Measurement range and accuracy
is not affected by the 80AK-A adapter
80BK-A Integrated DMM
Temperature Probe
• Compatible with all Fluk
DMMs with temperature
measurement functions
• K-Type thermocouple
with standard banana
jack
• Convenient one-piece construction
• Measurement range: -40 °C to 260 °C
(-40 °F to 500 °F)
Thermocouple Plug Kits
700TC1
A kit of 10 mini-plug
connectors. One each of
the following:
Type J (black)
Type K (yellow)
Type T (blue)
Type E (purple)
Type R/S (green)
Type B or Cu (white)
Type L (J-DIN) (blue)
Type U (T-DIN) (brown)
Type C (red)
Type N (orange)
700TC2
A kit of 7 mini-plug
connectors.
Type J (black), two
Type K (yellow), two
Type E (purple), one
Type T (blue), one
Type R/S (green), one
80PR-60 RTD Temperature Probe
• Resistance temperature detector
probe designed to
add contact measurements to your
Fluke 66 and 68
Non-Contact Infrared Thermometers
• Measurement range: -40 °C to 260 °C
(-40 °F to 500 °F)
• 3.5 mm phono type jack is only appropriate for Fluke 66 and 68 Thermometers
80CK-M and 80CJ-M
Type K and J Male
Mini-Connectors
• Isothermal screw terminal for K or J wire
• Suitable for up to 20
gauge thermocouple
wire
• Color coded to industry
standards (K-yellow,
J-black)
• Two per package
80PJ-EXT, 80PKEXT, 80PT-EXT
Thermocouple
Wire Extension
Kits
For extending and
repairing J, K or
T-type
thermocouple
wires.
• Kit includes 3
m (approx. 9 ft.)
of thermocouple
wire and 1 pair
of male/female
mini-connectors
• Maximum continuous exposure
temperature: 260
°C (500 °F)
• 80PK-EXT is compatible with
K-type thermometers; 80PJ-EXT is
designed for J-Type thermometers,
and 80PT-EXT is designed for
T-type thermometers
Process tools accessories
BP7217
• NiCd rechargeable battery; nominal 7.2 volt,
1700 mA hr
• Use in 867B meters or
700 and 740 Series
Calibrators
BP7235
• NiMH rechargeable
battery; nominal
7.2 volt, 3500 mA hr
• Use in 700 and 740
Series Calibrators
700LTP-1 Low Pressure Test Pump
Hand operated pressure
pump designed to generate
either vacuum to -13 psi/
-.90 bar or pressures to
100 psi/6.9 bar. Ideal for
low pressure applications
requiring accurate low pressure testing.
700ILF In-line Filter
The Fluke 700ILF can
be used to isolate the
calibrator from incidental contact with fluids.
Particularly useful with
the 718 calibrator to help keep moisture or oils from contaminating the
on-board pump.
700PTP-1 Pneumatic Test
Pump
The Fluke 700PTP is a handheld
pressure pump designed
to generate either vacuum to
-11.6 psi/-0.8 bar or pressure
to 600 psi/40 bar.
For more information, go to www.fluke.com/accessories
700HTP-1 Hydraulic Test
Pump
The Fluke 700HTP is
designed to generate pressures up to 10,000 psi/700
bar. Use the Fluke-700PRV
adjustable relief valves to
limit pressures from 1360 psi
to 5450 psi.
700HTH Hydraulic
Test Hose
The 700HTH is
a 10,000
psi, 700 bar
test hose that
connects to a
calibration unit under test
from a Fluke 700HTP hydraulic
test pump.
700PMP Pressure
Pump
The 700PMP is a handoperated pressure pump
to provide pressures up
to 150 psi/1000 kPa.
Output fitting is 1/8
FNPT.
Fluke 700-IV
Current Shunt
Conversion factor:
10 mV = 1 mA
Accuracy (% of
input, 1 year): 0.025 %
Input current: 0 to 55 mA
Input resistance: 250 Ω nominal
Output resistance: 10 Ω nominal
Accuracy specification applies
from +18 °C and 28 °C to 50 °C
Maximum input voltage: 30 V dc
Accessories
59
Fluke current clamps
For use with multimeters, ScopeMeters
and power quality analyzers
AC current clamp specifications
AC current range
Accuracy
Bandwidth (-3 dB)
AC only models
i200
i200s
i400
i400s
i800
i1000s
i3000s
i2000 flex
i3000s flex
1 A to 200 A
1 A to 200 A
1 A to 400 A
0.5 A to 400 A
1 A to 800 A
1 A to 3000 A
2 A to 2000 A
3 A to 3000 A
2 % + 0.06 A
45 Hz to
400 Hz
.5 A to 40 A, 2
% +
.015 A, 5 A to
400 A, 2 % +
.04 A, 45 to
400 Hz
0.1 A to
10 A ± 3 %
+ .01 A,
10 A to 200 A
± 2 %,
200 A to
800 A ± 1 %
0.2 A to
1000 A
0.2 to 10 A:
3 % + 0.1 A
10 A to
100 A:
2 % + 0.5 A
100 A to
1000 A:
1%+1A
48 to 65 Hz
5 Hz to
100 kHz
54 mm
(2.13 in)
1 to 30 A:
2 % + 0.1 A 1
to 300 A:
2 % + 0.5 A 1
to 3000 A: 2
%+2A
48 to 65 Hz
± 1 % of
range
45 to 65 Hz
Ranges: 20
A, 200 A,
2000 A
± 1 % of
range, 45 Hz
to 65 Hz
Ranges:
30 A, 300 A,
3000 A
< 3 % + 0.5 A < 1 % + 0.5 A
48 to 65 Hz
48 Hz to
65 Hz
40 Hz to
40 kHz
20 mm
(0.8 in)
40 Hz to
40 kHz
20 mm
(0.8 in)
5 kHz to
20 kHz
32 mm
(1.25 in)
5 Hz to
10 kHz
32 mm
(1.25 in)
30 Hz to
10 kHz (typical)
54 mm
(2.13 in)
Maximum
conductor size
300 MCM
300 MCM
750 MCM
750 MCM
2-500 MCM or 2-500 MCM or
1-1000 MCM 1-1000 MCM
Output levels
1 mA/A
10 mV/A
100 mV/A
1 mA/A
10 mV/A
1 mV/A
1 mA/A
Output cable
1.5 m
shrouded
banana plugs
2 m to BNC
termination
1.5 m
shrouded
banana plugs
2.5 m to BNC
termination
1.6 m
shrouded
banana plugs
Warranty
Safety rating
One-year
CAT III 600 V
One-year
CAT III 600 V
One-year
CAT III 1000 V
CAT IV 600 V
One-year
CAT III 1000 V
CAT IV 600 V
Maximum conductor
diameter
10 Hz to
10 Hz to
100 kHz
20 kHz
64 x 100 mm 177 mm (7 in)
(2.52 x 3.94 in)
64 mm
(2.52 in)
10 Hz to
50 kHz
177 mm (7
in) or 265 mm
(10.4 in)
610 mm or
915 mm
circumference
100 mV/A
10 mV/A
1 mV/A
2.1 m to BNC
termination
1 mV/A
10 mV/A
100 mV/A
1.6 m to BNC
termination
10 mV/A
1 mV/A
0.1 mV/A
2.1 m to BNC
termination
One-year
CAT III 600 V
One-year
CAT III 600 V
One-year
CAT III 600 V
610 mm
(24 in)
circumference
100 mV/A
10 mV/A
1 mV/A
2 m with
double
shrouded
banana plugs
One-year
CAT III 600 V
i800
i1000s
0.1 A to
1000 A*
3 A to
1000 A*
0.6 A to
1000 A*
0.6 A to
1000 A*
0.1 A to
1000 A*
0.2 A to
1000 A*
0.1 A to
1000 A*
0.6 A to
1000 A*
0.1 A to
1000 A*
0.2 A to
1000 A*
0.1 A to
1000 A*
0.3 A to
1000 A*
0.3 A to
1000 A*
0.1 A to
1000 A*
0.2 A to
1000 A*
0.1 A to
1000 A*
0.2 A to
1000 A*
0.2 A to
1000 A*
0.3 A to
1000 A*
0.1 A to
1000 A2
0.1 A to
1000 A
0.3 A to
1000 A
0.1 A to
1000 A
0.25 A to
1000 A
0.1 A to
1000 A
0.15 A to
1000 A*
i3000s
1 A to
3000 A
30 A to
3000 A
1 A to
3000 A
1 A to
3000 A
1 A to
3000 A
2 A to
3000 A
1 A to
3000 A
1 A to
3000 A
1 A to
3000 A
2 A to
3000 A
1 A to
3000 A
3 A to
3000 A
3 A to
3000 A
1 A to
3000 A
2 A to
3000 A
1 A to
3000 A
1 A to
3000 A
2 A to
3000 A
3 A to
3000 A
1 A to
3000 A2
1 A to
3000 A
1.2 A to
3000 A
1 A to
3000 A
2.5 A to
3000 A
1 A to
3000 A
1.5 A to
3000 A
i2000 Flex1
2 A to
2000 A
3 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A2
2 A to
2000 A
Best to use
i430Flex
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
i3000s Flex
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A2
3 A to
3000 A
Best to use
i430Flex
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
0.1 A to
1000 A*
0.2 A to
1000 A*
1.1 A to
1000 A*
0.2 A to
1000 A*
1 A to
3000 A
1 A to
3000 A
11 A to
3000 A
2 A to
3000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
2 A to
2000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
3 A to
3000 A
i200s
i400
One-year
CAT III 600 V
AC current clamp selection guide
Meter
10/11/12/12B/16/18
i200
110/111/112
114/116
115/117
21/23/73/75/77
Series III
26/79 Series III
27
233
27II
28II
60 A to
200 A
1 A to
200 A
1 A to
40 A
1 A to
200 A
60 A to
200 A
2 A to
200 A
1.8 A to
200 A
70 Series III
175/177/179
1577/1587
Insulation Meter
83III/83V/88V
85/87 Series III
87 Series V
87/89 Series IV
187/189
287/289
8060A/8062A
DMMs
860 Series Graphical
Multimeters
39/41B Power
Meter
43B Power
Quality Analyzer
434/435 Power
Quality Analyzer
9X ScopeMeter
Series
120 Series
ScopeMeters
190 Series
Scopemeters
45 DMM
8808A
8845A/8846A
74X Series Process
Calibrators
787/789 Process
Meters
3 A to
200 A
3 A to
200 A
2 A to
200 A
2 A to
200 A
2.5 A to
200 A
1 A to
200 A
2 A to
200 A
1 A to
200 A
1.5 A to
100 A
1 A to
200 A
1 A to
200 A
50 A to
200 A
i200s
1 A to
200 A
3 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A2
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1 A to
200 A
1.1 A to
200 A
1 A to
200 A
i400
60 A to
400 A
1 A to
400 A
1 A to 40 A &
200 A to 400 A
1 A to
400 A
60 A to
400 A
2 A to
400 A
1.8 A to
400 A
3 A to
400 A
3 A to
400 A
2 A to
400 A
2 A to
400 A
2.5 A to
400 A
1 A to
400 A
2 A to
400A
1 A to
400 A
1.5 A to
100 A
1 A to
400 A
1 A to
400 A
50 A to
400 A
i400s
1 A to
400 A*
30 A to
400 A*
0.6 A to
400 A*
0.6 A to
400 A*
1 A to
400 A*
2 A to
400 A*
1 A to
400 A*
0.6 A to
400 A*
1 A to
400 A*
1.8 A to
400 A
1 A to
400 A*
1 A to
400 A*
3 A to
400 A*
1 A to
400 A*
2 A to
400 A*
1 A to
400 A*
0.5 A to
400 A*
2 A to
400 A*
3 A to
400 A*
1 A to
400 A2
0.35 A to
400 A
1.2 A to
400 A
1 A to
400 A
2.5 A to
400 A
1 A to
400 A
1.5 A to
400 A*
0.5 A to
400 A*
1 A to
400 A*
11 A to
400 A*
2 A to
400 A*
60 A to
800 A
1 A to
800 A
1 A to 40 A &
200 A to 800 A
1 A to
800 A
60 A to
800 A
2 A to
800 A
1.8 A to
800 A
3 A to
800 A
3 A to
400 A
2 A to
800 A
2 A to
800 A
2.5 A to
800 A
1 A to
800 A
2 A to
800 A
1 A to
800 A
1.5 A to 100 A
&
500 A to 800 A
1 A to
800 A
1 A to
800 A
50 A to
440 A
* Requires PM9081/001 Adapters.
1
Three range version.
2
Current and watt readings will be multiples of 10 higher or lower than actual on some ranges.
60
Accessories
i800
i1000s
i2000 Flex
i3000s Flex
i6000s
• 6 A to 6000 A
• Compatible with most
products except 434/435
For more information, go to www.fluke.com/accessories
Fluke current clamps
For use with multimeters, ScopeMeters
and power quality analyzers
AC/DC current clamp specifications
80i-110s
AC/DC models
i410
i1010
i30
i30s
i310s
0.1A to 450A
DC range
0.1 A to 100 A
1 to 400 A
1 to 1000 A
30 mA to 30 A
30 mA to 30 A
AC range
0.1 A to 70 A
1 A to 400 A
1 A to 600 A
30 mA to 20 A rms
30 mA to 20 A rms
0.1A to 300A
± 1 % of reading,
± 2 mA
± 1 % of reading,
± 2 mA
30 A range: 1 % +
50 mA
300 A range: 1 % +
300 mA
Accuracy
Bandwidth (-3 dB)
0.1 A to 10 A; dc to 3.5 % + 0.5 A for dc or 2 % + 0.5 A for dc or ac
1 kHz: ± 3 % + 50 mA;
ac (45 to 400 Hz)
(45 to 400 Hz)
up to 100 A add 15 %;
up to 20 kHz add 12 %
100 kHZ
3 kHz
10 kHz
Zero error adjustment
Yes
Yes
Yes
Yes
Yes
Yes
Maximum conductor
diameter
11.8 mm (0.46 in)
30 mm (1.18 in)
30 mm (1.18 in)
19 mm (0.75 in)
19 mm (0.75 in)
19 mm (0.75 in)
Maximum conductor
size
dc to 20 kHz (-0.5 dB) dc to 100 kHz (-0.5 dB)
DC to 20 kHz
1 AWG
750 MCM or 2-500
MCM
750 MCM or 2-500
MCM
250 MCM
250 MCM
250 MCM
Output levels
10 mV/A, 100 mV/A
1 mV/A
1 mV/A
100 mV/A
100 mV/A
1 mV/A, 10 mV/A
Output cable
1.6 meter with BNC
termination
1.2 meter with
shrouded banana
plugs
1.2 meter with
shrouded banana
plugs
1.5 meter with
shrouded dual
banana plue
2 meter with BNC
termination
2 meters with BNC terr
mination and a BNC to
safety shrouded banana
adapter
Battery life
40 hours
60 hours
60 hours
30 hours
30 hours
30 hours
Warranty
One-year
One-year
One-year
One-year
One-year
One-year
CAT II 600 V;
CAT III 300 V
CAT III 600 V
CAT III 600 V
CAT III 300 V
CAT III 300 V
CAT III 300 V
Safety
i410
AC/DC current clamp selection guide
Meter
80i-110s
i410
i1010
i30
i30s
i310s
10/11/12/12B/16/18
0.1 A to 100 A dc/
0.1 A to 70 A ac*
5 A to 400 A dc/
7 A to 400 A ac
5 A to 1000 A dc/
7 A to 600 A ac
40 mA to 30 A dc/
60 mA to 20 A ac
40 mA to 30 A dc/
60 mA to 20 A ac
0.4 A to 450 A dc/
0.6 A to 300 A ac
110/111/112
0.14 A to 100 A dc/
3 A to 70 A ac*
5 A to 400 A dc/
300 A to 400 A ac
5 A to 1000 A dc/
300 A to 600 A ac
40 mA to 30 A dc/
3 A to 20 A ac
40 mA to 30 A dc/
3 A to 20 A ac
0.4 A to 450 A dc/
30 A to 300 A ac
114/115/116/117
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1.4 A to 400 A dc/
6 A to 400 A ac
1.4 A to 1000 A dc/
6 A to 600 A ac
30 mA to 30 A dc/
60 mA to 20 A ac
30 mA to 30 A dc/
60 mA to 20 A ac
0.1 A to 450 A dc/
0.6 A to 300 A ac
21/23/70/73/75/77
Series III
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
5 A to 400 A ac
1 A to 1000 A dc/
5 A to 600 A ac
30 mA to 30 A dc/
40 mA to 20 A ac
30 mA to 30 A dc/
40 mA to 20 A ac
0.1 A to 450 A dc/
0.4 A to 300 A ac
26/79 Series III
0.1 A to 100 A dc/
0.2 A to 70 A ac*
1 A to 400 A dc/
20 A to 400 A ac
1 A to 1000 A dc/
20 A to 600 A ac
30 mA to 30 A dc/
200 mA to 20 A ac
30 mA to 30 A dc/
200 mA to 20 A ac
0.1 A to 450 A dc/
2 A to 300 A ac
233
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1.4 A to 400 A dc/
6 A to 400 A ac
1.4 A to 1000 A dc/
6 A to 600 A ac
30 mA to 30 A dc/
60 mA to 20 A ac
30 mA to 30 A dc/
60 mA to 20 A ac
0.1 A to 450 A dc/
0.6 A to 300 A ac
27
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
1 A to 400 A ac
1 A to 1000 A dc/
1 A to 600 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
0.1 A to 450 A dc/
0.1 A to 300 A ac
27II
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
1 A to 400 A ac
1 A to 1000 A dc/
1 A to 600 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
0.1 A to 450 A dc/
0.1 A to 300 A ac
28II
0.1 A to 100 A dc/
0.2 A to 70 A ac*
1 A to 400 A dc/
6 A to 400 A ac
1 A to 1000 A dc/
6 A to 600 A ac
30 mA to 30 A dc/
60 mA to 20 A ac
30 mA to 30 A dc/
60 mA to 20 A ac
0.1 A to 450 A dc/
2 A to 300 A ac
77-IV
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
5 A to 400 A ac
1 A to 1000 A dc/
5 A to 600 A ac
30 mA to 30 A dc/
40 mA to 20 A ac
30 mA to 30 A dc/
40 mA to 20 A ac
0.1 A to 450 A dc/
0.4 A to 300 A ac
175/177/179
0.11 A to 100 A dc/
0.3 A to 70 A ac*
1.6 A to 400 A dc/
30 A to 400 A ac
1.6 A to 1000 A dc/
30 A to 600 A ac
30 mA to 30 A dc/
300 mA to 20 A ac
30 mA to 30 A dc/
300 mA to 20 A ac
0.1 A to 450 A dc/
3 A to 300 A ac
1577/1587
Insulation Meter
0.1 A to 100 A dc/
0.3 A to 70 A ac*
1.2 A to 400 A dc/
30 A to 400 A ac
1.2 A to 1000 A dc/
30 A to 600 A ac
30 mA to 30 A dc/
300 mA to 20 A ac
30 mA to 30 A dc/
300 mA to 20 A ac
0.1 A to 450 A dc/
3 A to 300 A ac
83-III/83-V/88-V
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
1 A to 400 A ac
1 A to 1000 A dc/
1 A to 600 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
0.1 A to 450 A dc/
0.1 A to 300 A ac
85-III/87-III/87-V
0.1 A to 100 A dc/
0.2 A to 70 A ac*
1 A to 400 A dc/
20 A to 400 A ac
1 A to 1000 A dc/
20 A to 600 A ac
30 mA to 30 A dc/
200 mA to 20 A ac
30 mA to 30 A dc/
200 mA to 20 A ac
0.1 A to 450 A dc/
2 A to 300 A ac
87-IV/89-IV/
187/189
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
2.5 A to 400 A ac
1 A to 1000 A dc/
2.5 A to 600 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
0.1 A to 450 A dc/
0.25 A to 300 A ac
287/289
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
1 A to 400 A ac
1 A to 1000 A dc/
1 A to 600 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
0.1 A to 450 A dc/
0.1 A to 300 A ac
8060A/8062A
DMMs
0.1 A to 100 A dc/
0.2 A to 70 A ac*
1 A to 400 A dc/
20 A to 400 A ac
1 A to 1000 A dc/
20 A to 600 A ac
30 mA to 30 A dc/
200 mA to 20 A ac
30 mA to 30 A dc/
200 mA to 20 A ac
0.1 A to 450 A dc/
2 A to 300 A ac
860 Series Graphical
Multimeters
80i-110s
0.1 A to 100 A dc/
0.3 A to 70 A ac*
1 A to 400 A dc/
30 A to 400 A ac
1 A to 1000 A dc/
30 A to 600 A ac
30 mA to 30 A dc/
300 mA to 20 A ac
30 mA to 30 A dc/
300 mA to 20 A ac
0.1 A to 450 A dc/
3 A to 300 A ac
39/41B Power
Meter
Usable but will read
10 or 100 times
higher
1 A to 400 A ac**
Not spec’d for dc
1 A to 600 A ac**
Not spec’d for dc
Usable but will read
100 times higher**
Usable but will read
100 times higher
Not spec’d for dc
0.6 A to 300 A ac
9X ScopeMeter
Series
0.1 A to 100 A dc/
0.1 A to 70 A ac
1 A to 400 A dc/
5 A to 400 A ac**
1 A to 1000 A dc/
5 A to 600 A ac**
30 mA to 30 A dc/
50 mA to 20 A ac**
30 mA to 30 A dc/
50 mA to 20 A ac
0.1 A to 450 A dc/
0.5 A to 300 A ac
123/124
ScopeMeters
0.1 A to 100 A dc/
0.25 A to 70 A ac
1 A to 400 A dc/
25 A to 400 A ac**
1 A to 1000 A dc/
25 A to 600 A ac**
30 mA to 30 A dc/
250 mA to 20 A ac**
30 mA to 30 A dc/
250 mA to 20 A ac
0.1 A to 450 A dc/
2.5 A to 300 A ac
190 Series
Scopemeters
0.1 A to 100 A dc/
0.1 A to 70 A ac
1 A to 400 A dc/
5 A to 400 A ac**
1 A to 1000 A dc/
5 A to 600 A ac**
30 mA to 30 A dc/
50 mA to 20 A ac**
30 mA to 30 A dc/
50 mA to 20 A ac
0.1 A to 450 A dc/
0.5 A to 300 A ac
45 DMM
0.1 A to 100 A dc/
0.15 A to 70 A ac*
1 A to 400 A dc/
15 A to 400 A ac
1 A to 1000 A dc/
15 A to 600 A ac
30 mA to 30 A dc
150 mA to 20 A ac
30 mA to 30 A dc
150 mA to 20 A ac
0.1 A to 450 A dc/
1.5 A to 300 A ac
8808A
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
2 A to 400 A ac
1 A to 1000 A dc/
2 A to 600 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
0.1 A to 450 A dc/
0.2 A to 300 A ac
8845A/8846A
0.1 A to 100 A dc/
0.1 A to 70 A ac*
1 A to 400 A dc/
1 A to 400 A ac
1 A to 1000 A dc/
1 A to 600 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
30 mA to 30 A dc/
30 mA to 20 A ac
0.1 A to 450 A dc/
0.1 A to 300 A ac
705/707
0.1 A to 100 A dc,
No ac*
4 A to 400 A dc,
No ac
4 A to 1000 A dc,
No ac
40 mA to 30 A dc,
No ac
40 mA to 30 A dc,
No ac
0.4 A to 450 A dc,
No ac
715
0.1 A to 100 A dc,
No ac*
4 A to 400 A dc,
No ac
4 A to 1000 A dc,
No ac
40 mA to 30 A dc,
No ac
40 mA to 30 A dc,
No ac
0.1 A to 450 A dc,
No ac
74X Series Process
Calibrators
0.1 A to 100 A dc/
1.1 A to 70 A ac*
1 A to 400 A dc/
110 A to 400 A ac
1 A to 1000 A dc/
110 A to 600 A ac
30 mA to 30 A dc/
1.1 A to 20 A ac
30 mA to 30 A dc/
1.1 A to 20 A ac
0.1 A to 450 A dc/
11 A to 300 A ac
787/789 Process
Meters
0.1 A to 100 A dc/
0.2 A to 70 A ac*
1 A to 400 A dc/
20 A to 400 A ac
1 A to 1000 A dc/
20 A to 600 A ac
30 mA to 30 A dc/
200 mA to 20 A ac
3 mA to 30 A dc/
200 mA to 20 A ac
0.1 A to 450 A dc/
2 A to 300 A ac
i1010
i310s, i30s and i30
Hall Effect AC/DC
Current Clamps
• Especially useful for
low current measurements down to 30
milliamps
i310
i30s
i30
* Requires PM9081 Adapter
** Requires PM9082/001 Adapter
***Only for use with the 430 Series Power Quality Analyzers
For more information, go to www.fluke.com/accessories
Accessories
61
Fluke lights and hangers
Free your hands and shed light on the contact point
LVD1 Volt Light
• Exclusive dual-sensitivity
• Detects voltages from 40 V ac to
300 V ac
• Voltage detector glows blue at 50 Hz to
60 Hz or 2.5 cm to 38 cm (1 in to 5 in)
away from source
• Ultra-bright white LED with 100,000
hour bulb life
• AAA battery included
L206 Deluxe LED Hat Light
(hard hat not included)
Attach it to a hard hat, a baseball cap,
or even a panel door for all the light
you need.
• Three super bright white LEDs—never
burn out
• Special hard-hat attachment included
• 40-hour battery life
• Includes three AAA batteries
L210 Probe Light and Probe Extenders
• 8 inch probe extenders fit modular test
probes
• Probe and extender length complies with
NFPA recommendations
• Bright white LED illuminates contact
area
• Probe light fits on extender or test probe
LVD2 Volt Light
• Non-contact ac voltage detector and
bright white LED flashlight
• Detects voltage from 90 V to 600 V ac
from 1 to 5 inches away
• CAT IV rated, one-year warranty
L205 Mini Hat Light
Rugged, high-intensity Xenon worklight.
• Attaches to a baseball cap
• Includes a hat clip
• Includes two AAA batteries
• Waterproof
62
Accessories
TPAK ToolPak™ Magnetic
Meter Hanger
L215 SureGrip™ Kit with Probe Light and
Probe Extenders
• L200 probe light
• TP220 SureGrip test probes
• TL224 SureGrip test leads
• TP280 test probe extenders
• Soft foldable pouch, keeps the entire
set together
• Free both hands to make
measurements
• Hang your meter from metallic
surfaces like panels and pipes
• Kit includes universal hanger clips
(two), hook and loop straps (two
lengths), adapter and strong magnet
• Attaches to back of many Fluke
meters, including 110, 170, 180,
280 Series, 87V and 83V DMMs,
724, 725 and 789 Process Calibrators, 70 Series III DMMs, 1503,
1507, 1577 and 1587 Insulation
Multimeters and 50 Series II Digital
Thermometers
For more information, go to www.fluke.com/accessories
Specialty accessories and software
Get more out of your multimeter
Stray voltage
Fiber optics
SV225
• Eliminates stray voltage
due to capacitance
between wires in
electrical installations
• Compatible with all
instruments and test lea
that accept standard 4 mm shrouded
banana connectors
FOM Fiber Optic
Meter
The Fluke Fiber Optic
Meter (FOM) helps
you test and maintain fiber optic cable
without having to buy
a whole new meter. Plug the FOM directly
into any DMM with a mV dc funtion and a
10 mW input impedance, and quickly and
accurately verify fiber optic cable system
loss. Light sources and patch cords sold
separately.
Pressure and vacuum
PV350 Pressure Vacuum Module
• Digital pressure
and vacuum
measurements in
a single module
• Measures
HVAC/R,
hydraulic and
pneumatic pressu
to 350 psig/2413
to 500 psig)
• Measures to 76 cm Hg (29.9 in Hg)
vacuum (not intended for measuring
microns of vacuum)
• Compatible with most digital multimeters
Logging software
FOS 850
and FOS
850/1300
Fiber Optic
Light Sources
A variety
of LED light
sources allow
you to test different cables.
FlukeView® Forms
Harness the power of the data logging
function on your Fluke Digital Multimeter,
Thermometer or ProcessMeter. Log live
readings while connected to a PC, or
leave your Fluke 289, 789 or 54-II in
place to capture up to 1,000 readings for
download to a PC.
Choose the model that’s right for you:
• FVF-SC2: Includes software and cable
used with 280 Series DMMs and 789
ProcessMeters, and the 1550B Insulation Tester
• FVF-SC3: Includes software and cable
used with 45 Bench Meters
• FVF-SC4: Includes software and
cable used with 8845A and 8846A
Multimeters
Fuse selection guide
Replacement fuses for Fluke DMMs are available from your distributor. To order
direct from Fluke call 1-800-44-FLUKE (U.S.) or email [email protected]
Go to www.fluke.com/flukeviewforms
to download the demo.
FlukeView® Forms Basic
An abridged version of FlukeView Forms.
• Available for use with 280 Series
DMMs and 789 ProcessMeters, only
• Upgrade to the full FlukeView Forms
with FVF-UG
• Compatible with the 280 and 789
series only
1577
1587
787/789
744
•
741/743
•
725/726
•*
•
43B
•
•
715
287/289/187/189
•
• 83V •
233
•
•
87V
179
•
•
FlukeView Forms
Software
TPak
87/89 IV
175/177
80 Series III/83V
70/73 III
•
27 II/28 II/27
114/115/116/117
•
20/70 Series
110/111/112
Selection
Guide
10/11/12/12B
83-III/85-III/87-III 87-IV/89-IV/187/189/287/289/77III/79-III/23-III/26-III/175/177/179/77-IV/27-II/28-II
111/112/115/117/233
1577/1587
1503/1507
787/789
705/707
83/85/87 (S/N>6565000)
51/52/53/54 II
27 (S/N>7247001
190 Series
27 (S/N<7247001)
120 Series
Fuse Requirements
P/N 871173 630mA 250V fuse
P/N 803293 11A 1000V fuse
P/N 871173 630mA 250V fuse
P/N 871202 3A 600V fuse
P/N 892583 15A 600V fuse
P/N 943121 440mA 1000V fuse
P/N 803293 11A 1000V fuse
P/N 943121 440mA 1000V fuse
P/N 803293 11A 1000V fuse
P/N 943121 440mA 1000V fuse
P/N 803293 11A 1000V fuse
P/N 803293 11A 1000V fuse
P/N 943121 440mA 1000V fuse
P/N 2279339 315mA 1000V fuse
P/N 943121 440mA 1000V fuse (Qty 2)
90 Series
Model
21-III/75-III/73-III
789
•
789 •
•
•
•
PV350 (pressure)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FOM (fiber optic)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CO-210
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*53 B II, 54 B II only.
For more information, go to www.fluke.com/accessories
Accessories
63
Your authorized Fluke distributor
Join the conversation
We design our products with you in mind. Yeah, we have
guys in lab coats, developing and testing our tools in
rooms we dare not enter. But our ideas, the things that
drive our intense development process, come straight from
the job site—from pros like you. You are the voice of Fluke’s
innovation. Tell us what you think. Visit our social media
sites, and get the conversation started. We’re listening.
More Fluke info online
• Complete digital
catalog
• Measurement safety
• Newest products
•
•
•
•
Where to buy
Extended specs
Online Store
How-to information
www.fluke.com/catalog
www.facebook.com/fluke.corporation
Contact us:
www.twitter.com/flukecorp
www.youtube.com/flukecorporation
United States
General product and sales
information: 1-800-44-FLUKE
fl[email protected]fluke.com
Fluke Thermal Imagers:
1-800-760-4523 (U.S. only) all
other regions 1-425-446-4620
Service and calibration:
1-888-99-FLUKE
Parts: 1-800-526-4731
Canada
General product, sales, service,
parts and calibration information:
1-800-36-FLUKE
[email protected]fluke.com
Australia
General product and sales
information: (02) 8850-3333
Parts: (02) 8850-3333
Service and calibration:
(02) 9771-9300
Fluke. Keeping your world up and running.®
Fluke Corporation
PO Box 9090,
Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
Singapore
General product and sales
information: (65) 6799-5566
[email protected]fluke.com
Service, parts and calibration:
(65) 6799-5588
[email protected]fluke.com
For more information call:
In the U.S.A. (800) 443-5853 or Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or Fax (905) 890-6866
From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116
Web access: http://www.fluke.com
Japan
General product and sales
information: +81-3-3434-0181
Service, parts and calibration:
+81-3-3434-0188
©2003-2011 Fluke Corporation. Specifications subject to change without notice. Microsoft is a registered trademark of Microsoft Corporation. Printed in U.S.A. 12/2010 1274458S C-US-N Volume 41
Other countries: 1+(425) 446-5500
Modification of this document is not permitted without written permission
from Fluke Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement