Samsung AH68-01943R User manual

Samsung AH68-01943R User manual
AH68-02019K
HT-BD2_NOGB.indd
*2
2007-12-6
11:46:39
HT-BD2
7.1CH Blu-ray
Home Cinema System
user manual
HT-BD2
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/global/register
HT-BD2_NOGB.indd
*3
2007-12-6
11:46:44
key features of your new
Blu-ray Home Cinema
PLAYER FEATURES
Multi-Disc Playback & FM Tuner
The HT-BD2 combines the convenience of multi-disc playback capability, including BD-ROM, DVD-VIDEO,
DVD-RW/-R(V mode), CD, MP3-CD and CD-R/RW, with a sophisticated FM tuner, all in a single player.
Dolby Pro Logic IIx
Dolby Pro Logic IIx is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro Logic.
Dolby Digital Plus
Dolby Digital Plus is the next-generation audio technology for all high-definition programming and media.
Dolby TrueHD
Dolby TrueHD is Dolby’s next-generation lossless technology developed for high-definition disc-based media.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc.
DTS-HD ( Digital Theater Systems - High Definition )
DTS-HD Audio provides the highest quality multi-channel sound possible.
It delivers sound quality that matches the clear and vivid images of high-definition video.
TV Screen Saver Function
If the main unit remains in stop mode for 10 minutes, the Samsung logo appears on TV screen.
The HT-BD2 automatically switches itself into the power saving mode after 20 minutes in the Screen Saver mode.
Power Saving Function
The HT-BD2 automatically shuts itself off after 30 minutes in Stop mode.
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture.
The 1080p(Full HD) resolution provides even clearer pictures.
Anynet+(HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit of this system using a Samsung TV remote control,
by connecting the Blu-ray Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with
SAMSUNG TVs that support Anynet+.)
BLU-RAY DISC FEATURES
Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the
capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry (up to 1920 x
1080 at 40 Mbit/sec) - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has the
same familiar size and look as DVD.
* The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will
also vary from disc to disc. Not all discs will have the features described below.
Video highlights
The BD-ROM format for movie distribution supports three highly advanced video codecs, including AVC, VC-1, and MPEG-2.
HD video resolutions are also available:
• 1920 x 1080 HD
• 1280 x 720 HD
For High-Definition Playback
To view high-definition contents in BD discs, an HDTV (High Definition Television) is required. Some discs may require
using the player's HDMI OUT to view high-definition content. The ability to view high-definition content on BD discs may be
limited depending on the resolution of your TV.
2
HT-BD2_NOGB.indd
2
2007-12-6
11:46:46
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
GB
Graphic planes
Two individual, full HD resolution (1920x1080) graphic
layers are available, on top of the HD video layer.
One layer is assigned to video-related graphics (like
subtitles), and the other layer is assigned to interactive
elements, such as buttons or menus. Various wipes,
fades and scroll effects may be available on both
layers.
PREVIEWS
Graphic
Planes
▼
3
4
5
6
7
8
9
10
11
12
13
14
15
Menu graphics
Support 256 full color resolution graphics and
HD Video
animation, thereby greatly surpassing the capabilities
of DVD-Video. Unlike DVD, Menus can be accessed during video playback.
Menu sounds
When you highlight or select a menu option on a Blu-ray Disc,
sounds can be heard such as button clicks or a voice-over
explaining the highlighted menu choice.
Multi-page/PopUp Menus
With DVD-Video, playback is interrupted each time a new
menu screen is accessed. Due to Blu-ray Disc's ability to
preload data from the disc without interrupting playback, a
menu may consist of several pages.
You can browse through the menu pages or select different
menu paths, while the audio and video remain playing in the
background.
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
▼
3
4
5
6
7
8
9
10
11
12
13
14
15
Interactivity
Certain Blu-ray Discs may contain Animated menus and Trivia games.
User Browsable Slideshows
With Blu-ray Discs, you can browse through various still pictures while the audio remains playing.
Subtitles
Depending on what is contained on the Blu-ray Disc, you may be able to select different font styles, sizes and colors for the subtitles,
Subtitles may also be animated, scrolled or faded in and out.
WHAT’S INCLUDED
Check for the supplied accessories below.
Video Cable
FM Antenna
User's Manual
HDMI Cable
Remote Control
3
HT-BD2_NOGB.indd
3
2007-12-6
11:46:47
safety information
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
CAUTION
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
4
HT-BD2_NOGB.indd
4
2007-12-6
11:46:50
GB
PRECAUTIONS
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the Disc Insert Hole is empty. This player is designed for continuous use. Switching off
the Blu-ray Home Cinemar to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player
completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect the AC main plug from the
wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture (i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric fields
(i.e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use. Use of
this product is for personal use only.
Condensation may occur if your player or disc has been stored in
cold temperatures. If transporting the player during the winter,
wait approximately 2 hours until the unit has reached room temperature
before using.
The batteries used with this product contain chemicals that are harmful
to the environment.
Do not dispose of batteries in the general household trash.
5
HT-BD2_NOGB.indd
5
2007-12-6
11:46:51
contents
2
2
3
Player Features
Blu-ray Disc Features
What’s included
SAFETY INFORMATION
4
5
Safety Warnings
Precautions
GETTING STARTED
8
9
Before Reading the User’s Manual
Disc Type and Characteristics
DESCRIPTION
12
13
Front Panel
Rear Panel
REMOTE CONTROL
14
16
Tour of the Remote Control
Setting the Remote Control
CONNECTIONS
18
20
22
24
Speaker Installation
Connecting the Speakers
Connecting the Video Out to your TV
Connecting Audio from External
Components
Connecting to Samsung's FTP/Internet site
for Software Upgrades
Connecting the FM Antenna
KEY FEATURES OF YOUR NEW
BLU-RAY HOME CINEMA
2
4
8
12
14
18
26
27
BASIC FUNCTIONS OF YOUR
BLU-RAY HOME CINEMA
28
SYSTEM SETUP
32
28
29
30
31
31
Before Playing
Using the remote control to operate the
blu-ray home cinema or your samsung tv
Playing a Disc
Using the Search and Skip Functions
Slow Motion Play/Step Motion Play
32
33
34
35
39
42
44
On-Screen Menu Navigation
Setting up the Language Options
Setting up the Ausdio Options
Setting up the Speaker Options
Setting up the Video display/output Options
Setting up the HDMI setup options
Setting up the Parental Lock
6
HT-BD2_NOGB.indd
6
2007-12-6
11:46:55
Firmware Upgrade
System Information
Network Setup
WATCHING A MOVIE
50
51
52
53
53
54
54
Using the Display Function
Using the Disc Menu & Popup/Title Menu
Repeat Play
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
Using the Bookmark Function
LISTENING TO MUSIC
56
56
56
57
57
Playing an Audio CD(CD-DA)
Playing an MP3
Audio CD(CD-DA)/MP3 Screen Elements
Buttons on the Remote Control used for
Audio CD(CD-DA)/ MP3 disc playback
Repeat Audio CD(CD-DA) & MP3
59
59
59
60
60
Viewing a Picture
Slide Show
Rotate
Zoom
Go To Photo List
61
61
62
62
SFE(Sound Field Effect) Mode
NEO:6 mode
Dolby Pro Logic IIx Mode
Dolby Pro Logic IIx Effect
RADIO
63
63
Listening to Radio
Presetting Stations
CONVENIENT FUNCTION
64
64
64
Sleep Timer Function
Adjusting Display Brightness
Mute Function
TROUBLESHOOTING
65
troubleshooting
APPENDIX
67
68
Cautions on Handling and Storing Discs
Specifications
46
50
56
VIEWING A PICTURE
59
SOUND MODE
61
63
64
65
67
GB
46
48
48
SYSTEM UPGRADE
7
HT-BD2_NOGB.indd
7
2007-12-6
11:46:56
getting started
BEFORE READING THE USER’S MANUAL
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
Term
Definition
h
BD-ROM
This involves a function available on a BD-ROM.
DVD-VIDEO
This involves a function available on DVD-Video or DVD-R/DVD-RW discs
that have been recorded and finalized in Video Mode.
DVD-RW
This involves a function available on DVD-RW. (V mode and finalized only)
DVD-R
This involves a function available on DVD-R. (V mode and finalized only)
Audio CD
This involves a function available on a data CD (CD-R or CD-RW).
JPEG
This involves a function available on CD-R/-RW, DVD-R/-RW discs.
MP3
This involves a function available on CD-R/-RW, DVD-R/-RW discs.
Caution
This involves a case where a function does not operate or settings may be
cancelled.
Note
This involves tips or instructions on the page that help each function
operate.
Z
C
V
B
G
A
M
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before using this product. (See pages 4~5)
2) If a problem occurs, check the Troubleshooting. (See pages 65~66)
Copyright
©2007 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the
prior written permission of Samsung Electronics Co.,Ltd.
8
HT-BD2_NOGB.indd
8
2007-12-6
11:46:56
GB
DISC TYPE AND CHARACTERISTICS
Disc types that can be played
Disc Types
Disc Logo
Recorded content
AUDIO + VIDEO
BD-ROM
AUDIO + VIDEO
AUDIO
AUDIO-CD
Single sided (25GB/50GB)
Max. Playing minute
Playing time depends
on the Title
Single sided(12 cm)
240
Double sided(12 cm)
480
Single sided(8 cm)
80
Double sided(8 cm)
160
Single sided(12 cm)
74
Single sided(8 cm)
20
● GETTING STARTED
DVD-VIDEO
Disc Shape
DVD-RW
(V mode and
finalized only)
AUDIO + VIDEO
12 cm (4.7GB)
480
(EX : Extended Play)
DVD-R
(V mode and
finalized only)
AUDIO + VIDEO
12 cm (4.7GB)
480
(EX : Extended Play)
CD-R/-RW
DVD-RW/-R
JPEG
MP3
–
–
Logos of Discs that can be played
Blu-ray Disc
PAL broadcast system in
U.K, France, Germany, etc.
Digital Audio
M
MP3
Dolby Digital Plus
DTS-HD High Resolution Audio
Dolby TrueHD
DTS-HD Master Audio
Stereo
Java
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
 Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD, DTS-HD
High Resolution Audio and DTS-HD High Res Audio are trademarks of DTS, Inc. ©
1996-2007 DTS, Inc. All Rights Reserved.
 Manufactured under license under U.S. Patent #'s:5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 & other U.S. and worldwide patents issued & pending.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master
Audio are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
HT-BD2_NOGB.indd
9
9
2007-12-6
11:46:57
getting started
Discs that cannot be played
• Blu-ray Discs with a region code other
than "Region B".
• BD-R, BD-RE
• HD DVD Disc
• DVD-Video with a region number other
than “2” or “ALL”
M
•
•
•
•
•
•
DVD-RAM
3.9 GB DVD-R Disc for Authoring.
DVD-RW(VR mode)
DVD-ROM/PD/MV-Disc, etc
CVD/CD-ROM/CDV/CD-G/CD-I/LD
8cm MD (mini disc)
Some commercial discs and DVD discs purchased outside your region may not be playable with this
product. When these discs are played, either “No disc.” or “Please check the regional code of the disc.”
will be displayed.
 If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.
 The unit cannot play CD-R/-RW and DVD-RW/-R recorded content such as divx, avi, mpg, mov, wma.
Region code
Both the Blu-ray Home cinema and the discs are coded by region. These regional codes must match in
order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Bluray Home cinema is described on the rear panel of the Blu-ray Home cinema.
Disc Type
Blu-ray
DVD-Video
Region code
BD Region Code
Area
A
North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
B
C
Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.
India, China, Russia, Central and South Asia.
DVD-Video
Area
Region Code
1
USA, Canada
Japan, Europe, South Africa, Middle East,
2
Greenland
Korea, Taiwan, Hong Kong, Parts of South
3
East Asia
Australia, New Zealand, Latin America
4
(including Mexico)
5
Eastern Europe, Russia, India, Africa
DVD-Video
Region Code
6
China
Area
7
Unspecified Special Use
8
Airlines/Cruise Ships (including Mexico)
9
region free
Blu-ray Disc Compatibility
Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are
compatible and not every disc will play back. For additional information, refer to the Compliance and Compatibility
Notice section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care
center. This Samsung Blu-ray Home cinema (HT-BD2) supports only the BD-ROM Profile 1 version 1.0 specification.
If you want to play later version discs, you may need to update player's firmware. www.samsung.com/global/register
M
Playback may not work for some types of discs, or when specific operations, such as angle change and aspect
ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to
this if necessary.
 Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette
smoke on the recording surface may make it impossible to use the disc for playback.
 When a BD-Java title is played, loading may take longer than a normal title, or some functions may perform slowly.
10
HT-BD2_NOGB.indd
10
2007-12-6
11:46:59
GB
Disc Types
❖ BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM
may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for
playback on Blu-ray Home Cinemas. This unit can play back pre-recorded commercial BD-ROM discs.
❖ DVD-Video
❖ Audio CD
• An audio disc on which 44.1kHz PCM Audio is recorded.
• This unit can play back CD-DA format audio CD-R and CD-RW discs.
• The unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.
● GETTING STARTED
• A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32
subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround,
allowing you to enjoy vivid and clear theatre quality images.
• When switching from the first layer to the second layer of a dual-layered DVD Video disc, there may be
momentary distortion in the image and sound. This is not a malfunction of the unit.
• Once a DVD-RW/-R recorded in Video Mode is finalized, it becomes DVD-Video. Pre-recorded (prestamped) commercial DVDs with movies are also referred to as DVD-Videos. This unit can play back
pre-recorded commercial DVD discs (DVD-Video discs) with movies.
❖ CD-R/-RW
• Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above
disc, as the disc may not play back.
• If the CD-R/-RW disc was not recorded as a closed session, you may experience delays when playing
back the beginning of the disc or all recorded files may not play.
• Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used
to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability
may vary depending on contents and discs.
❖ DVD-R Disc Playback
• Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video.
• This unit can play back DVD-R discs recorded and finalized with a Samsung DVD video recorder. It
may not be able to play some DVD-R discs depending on the disc and the condition of the recording.
❖ DVD-RW Disc Playback
• Playback can be performed with DVD-RW discs in the Video Mode and finalized only.
• Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video. Ability to play back may
depend on recording conditions.
Disc Format
❖ Using MP3 disc
•
•
•
•
•
CD-R/-RW, DVD-RW/-R recorded with UDF, ISO9660 or JOLIET format can be played back.
Only MP3 files with the “.mp3” or “.MP3” extension can be played.
Playable bit-rate range is from 56 Kbps to 320 Kbps.
Playable sample-rate is 32KHz to 48KHz.
The unit can handle a maximum of 1500 files and folders under a parent folder. For MP3 files recorded
with a VBR(Variable Bit Rates), the sound may cut in and out.
❖ Using JPEG disc
• CD-R/-RW, DVD-RW/-R recorded with UDF, ISO9660 or JOLIET format can be played back.
• Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed.
• Progressive JPEG is supported.
❖ DVD-RW/-R (V)
• This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played
by this Blu-ray Home Cinema once it has been finalized.
• If a disc that has been recorded in Video Mode by a different maker’s recorder but has not been
finalized, it cannot be played by this Blu-ray Home Cinema.
11
HT-BD2_NOGB.indd
11
2007-12-6
11:47:00
description
FRONT PANEL
1
10
2
3
4
5
8
9
6
7
FUNCTION BUTTON
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
TUNING DOWN &
SKIP ( ) BUTTON
Goes back to the previous title/chapter/track.
STOP BUTTON
Stops disc playback.
PLAY/PAUSE BUTTON
Plays a disc or pauses playback.
TUNING UP &
SKIP( ) BUTTON
Goes to the next title/chapter/track.
Tunes down the FM frequency band.
Tunes up the FM frequency band.
Volume Control BUTTONS Volume adjustment.
10
EJECT BUTTON
Eject the disc.
DISC INSERT HOLE
Insert a disc.
STANDBY INDICATOR
When the unit is first plugged in, this indicator lights.
POWER BUTTON
Turns the Blu-ray Home Cinema on and off.
12
HT-BD2_NOGB.indd
12
2007-12-6
11:47:01
GB
REAR PANEL
1
2
3
4
5
6
7
FM
● DESCRIPTION
FM
10
10
9
8
AUX IN JACKS
Connect to the 2CH analog output of an external device (such as a VCR)
VIDEO OUTPUT JACK
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT Jack on this unit.
COMPONENT VIDEO
OUTPUT JACKS
Connect a TV with Component video inputs to these jacks.
EXTERNAL DIGITAL
OPTICAL INPUT
JACKS(OPTICAL1,
OPTICAL2)
Use this to connect external equipment capable of digital output.
HDMI OUT JACK
Use the HDMI cable, connect this HDMI output terminal to the HDMI input terminal on
your TV for the best quality picture.
LAN TERMINAL
Connect this LAN terminal to the LAN terminal on your modem for software upgrades.
FM 75Ω COAXIAL
JACK
Connect the FM antenna.
SUBWOOFER OUT
JACK
Connect the subwoofer speaker.
COOLING FAN
The fan always revolves when the power is on. Ensure a minimum of 10cm of clear
space on all sides of the fan when installing the product.
7 CHANNEL SPEAKER
Connect the front, center, surround, surround back speakers.
OUTPUT CONNECTORS
13
HT-BD2_NOGB.indd
13
2007-12-6
11:47:03
remote control
TOUR OF THE REMOTE CONTROL
1
2
3
18
19
20
4
5
6
7
21
22
23
8
24
9
25
26
27
28
10
29
11
30
31
32
33
34
35
12
13
14
15
16
17
14
HT-BD2_NOGB.indd
14
2007-12-6
11:47:12
BD RECEIVER button
19
EJECT button
2
TV button
20
TV/VIDEO button
3
POWER button
21
RDS Selection buttons
4
Number (0~9) buttons
22
STEP button
5
SLEEP button
6
SLOW, MO/ST button
7
Tuning Preset/CD Skip buttons
24
TUNING/CH button
8
VOLUME button
25
MUTE button
9
MENU button
26
RETURN button
10
POPUP MENU, TITLE MENU button
27
Cursor/ENTER button
11
Color buttons
28
DISC MENU button
12
INFO button
29
EXIT button
13
TUNER MEMORY, MARKER button
30
PL IIx MODE button
14
ZOOM button
31
PL IIx EFFECT button
15
AUDIO button
32
SFE MODE button
16
DIMMER button
33
REPEAT A-B button
17
SUB TITLE button
34
NEO:6 MODE button
35
REPEAT button
BD button
TUNER button
AUX button
D.IN button
PLAY/PAUSE button
STOP button
SEARCH buttons
● REMOTE CONTROL
18
23
GB
1
Insert Remote Batteries
1. Remove the battery
cover in the direction
of the arrow.
M
2.
Insert two 1.5V AAA batteries, paying
attention to the correct polarities
(+ and –).
3. Replace the battery
cover.
Follow these precautions to avoid leaking or cracking cells:
 Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
 Use the correct type of batteries. Batteries that look similar may differ in voltage.
 Always replace both batteries at the same time.
 Do not expose the batteries to heat or a flame.
15
HT-BD2_NOGB.indd
15
2007-12-6
11:47:14
remote control
SETTING THE REMOTE CONTROL
You can control certain functions of your TV with this remote control.
When operating a TV with the remote control
1. Press the TV button to set the remote to TV mode.
2. Press the POWER button to turn on the TV.
3. While holding down the POWER button, enter the code
corresponding to your brand of TV.
• If there is more than one code listed for your TV in the able,
enter one at a time to determine which code works.
Example : For a Samsung TV
While holding down the POWER button, use the number
buttons to enter 00, 15, 16, 17 and 40.
4. If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME, CHANNEL, and
Numeric buttons (0~9).
M
 The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
 If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Operation Range of the Remote Control
The remote control can be used up to approximately 23 feet (7 meters)
in a straight line. It can also be operated at a
horizontal angle of up to 30° from the remote control sensor.
16
HT-BD2_NOGB.indd
16
2007-12-6
11:47:16
No.
GB
TV Brand Code List
No.
Brand
1
Admiral (M.Wards)
56, 57, 58
44
MTC
18
2
A Mark
01, 15
45
NEC
18, 19, 20, 40, 59, 60
3
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11,
46
Nikei
03
12, 13, 14
47
Onking
03
Code
Brand
Code
AOC
01, 18, 40, 48
48
Onwa
03
5
Bell & Howell (M.Wards)
57, 58, 81
49
Panasonic
06, 07, 08, 09, 54, 66, 67, 73, 74
6
Brocsonic
59, 60
50
Penney
18
7
Candle
18
51
Philco
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
8
Cetronic
03
52
Philips
15, 17, 18, 40, 48, 54, 62, 72
9
Citizen
03, 18, 25
53
Pioneer
63, 66, 80, 91
10
Cinema
97
54
Portland
15, 18, 59
11
Classic
03
55
Proton
40
12
Concerto
18
56
Quasar
06, 66, 67
13
Contec
46
57
Radio Shack
17, 48, 56, 60, 61, 75
14
Coronado
15
58
RCA/Proscan
18, 59, 67, 76, 77, 78, 92, 93, 94
15
Craig
03, 05, 61, 82, 83, 84
59
Realistic
03, 19
16
Croslex
62
60
Sampo
40
17
Crown
03
61
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49,
18
Curtis Mates
59, 61, 63
19
CXC
03
62
Sanyo
19, 61, 65
20
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
63
Scott
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
64
Sears
15, 18, 19
21
Daytron
40
65
Sharp
15, 57, 64
22
Dynasty
03
66
Signature 2000 (M.Wards)
57, 58
23
Emerson
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
67
Sony
50, 51, 52, 53, 55
24
Fisher
19, 65
68
Soundesign
03, 40
25
Funai
03
69
Spectricon
01
26
Futuretech
03
70
SSS
18
27
General Electric (GE)
06, 40, 56, 59, 66, 67, 68
71
Sylvania
18, 40, 48, 54, 59, 60, 62
28
Hall Mark
40
72
Symphonic
61, 95, 96
29
Hitachi
15, 18, 50, 59, 69
73
Tatung
06
30
Inkel
45
74
Techwood
18
31
JC Penny
56, 59, 67, 86
75
Teknika
03, 15, 18, 25
32
JVC
70
76
TMK
18, 40
33
KTV
59, 61, 87, 88
77
Toshiba
19, 57, 63, 71
● REMOTE CONTROL
4
59, 60, 98
34
KEC
03, 15, 40
78
Vidtech
18
35
KMC
15
79
Videch
59, 60, 69
36
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
80
Wards
15, 17, 18, 40, 48, 54, 60, 64
37
38
Luxman
18
81
Yamaha
18
LXI (Sears)
19, 54, 56, 59, 60, 62, 63, 65, 71
82
York
40
39
Magnavox
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
83
Yupiteru
03
40
Marantz
40, 54
84
Zenith
58, 79
41
Matsui
54
85
Zonda
01
42
MGA
18, 40
86
Dongyang
03, 54
43
Mitsubishi/MGA
18, 40, 59, 60, 75
17
HT-BD2_NOGB.indd
17
2007-12-6
11:47:17
connection
This section involves various methods of connecting the Blu-ray Home Cinema to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
SPEAKER INSTALLATION
Please follow the steps below to install the speakers on the stands.
How to Install the Speaker and the Stand
1. Turn the stand upside down and mount it on the stand base.
STAND
BASE
STAND
2. Insert and tighten (Black) screws on the bottom side of the stand base.
3. Place the stand on thefl oor. Insert and tighten 2 (Silver) screws
on the back of the stand.
Speaker Packages
Please confirm that all the following contents are included in the package.
Front/Surround Speaker
Center Speaker
SPEAKER (4EA)
STAND BASE(4EA)
STAND (4EA)
Subwoofer Speaker
Surround Back
Speaker (2EA)
Audio Cable for Subwoofer
connection (1EA)
Screw (16EA): Black
Screw (16EA): Silver
Speaker Wire (7EA)
Front speakers and Surround speakers are
packaged separately as shown in the diagram.
18
HT-BD2_NOGB.indd
18
2007-12-6
11:47:18
4. Mount the speaker on the stand.
GB
SPEAKER
STAND
5. Tighten 2 (Silver) screws on the back of the speaker.
● CONNECTIONS
6. This is the successfully assembled speaker.
M
Make sure that the speaker is installed on a flat and stable area. Otherwise it may easily
be knocked over.
To mount the speakers on the wall
Drive a screw into the wall for each speaker and then
hook the front speaker over them.
Hook the speakers so that
the screws are in the
position of the figure.
19
HT-BD2_NOGB.indd
19
2007-12-6
11:47:21
connections
CONNECTING THE SPEAKERS
Position of the Blu-ray Home Cinema
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Front Speakersei
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in front
of the center speakers.
Center Speaker
f
It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.
Surround Speakers
hj
Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face
each other. Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.
the front and center speakers, the rear speakers are used to handle mainly sound effects and sound will not
* Unlike
come from them all the time.
Surround Back Speakers
• Place them so they face forward towards the back of the listener.
• Place the surround back speakers about 70 cm to 1 m (2.3~3.3feet) above surround speakers, facing slightly
downwards.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
20
HT-BD2_NOGB.indd
20
2007-12-6
11:47:22
GB
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
Black
Red
● CONNECTIONS
3. Connect the connecting plugs to the back of the Blu-ray Home
Cinema by matching the colors of the speaker plugs to the speaker
jacks.
4. Use the Audio cable to connect the SUBWOOFER OUT jack of
the main unit to the AUDIO IN jack of the subwoofer.
Audio cable
Subwoofer Speaker
FM
Center Speaker
Front Speaker (L)
Front Speaker (R)
Surround-Back Speaker (L)
Surround Speaker (R)
Surround-Back
Speaker (R)
Surround Speaker (L)
 Do not let children play with or near the speakers. They could get hurt if a speaker falls.
 When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is
correct.
 Keep the subwoofer speaker out of reach of children so as to prevent children from
inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.
 Do not hang the subwoofer on the wall through the duct (hole).
M
If you place a speaker near your TV set, screen color may be distorted because of the
magnetic field generated by the speaker. If this occurs, place the speaker away from your
TV set.
21
HT-BD2_NOGB.indd
21
2007-12-6
11:47:23
connections
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the three methods for connecting to a TV.
METHOD3
(supplied)
METHOD2
METHOD1
(supplied)
METHOD 1 : HDMI ....... (Best Quality)
Connect the HDMI cable from the HDMI OUT jack on the back of the Blu-ray Home Cinema to the HDMI
IN jack on your TV.
M
Depending on your TV, certain HDMI output resolutions may not work.
 If an HDMI cable is connected from the player to a TV, the Blu-ray Home Cinema’s output is set to
HDMI automatically within 10 seconds.
 If you are using the Anynet + feature (see page 42) and Component and HDMI are both
connected, HDMI mode is automatically selected.
 When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the
HDMI output resolution will be automatically set to the highest provided by the TV.
 If you connect a Samsung TV to the Blu-ray Home Cinema using an HDMI cable, the player can
be easily operated using the TV remote control. (This is only available with Samsung TVs that
support the Anynet+ feature.)
(See page 42)
 If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the
player will stop playing.
 After making the video connection, set the Video input source on your TV to match the
corresponding
Video output (HDMI, Component or Composite) on your Home Cinema.
See your TV owner's manual for more information on how to select the TV's Video Input source.
22
HT-BD2_NOGB.indd
22
2007-12-6
11:47:26
GB
HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable
while power is on. For possible HDMI resolutions, see page 41.
● CONNECTIONS
• HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
Using HDMI, the Blu-ray Home Cinema transmits a digital video and audio signal and displays a vivid picture on a
TV having an HDMI input jack.
• HDMI connection description
HDMI connector - Supports video and digital audio data.
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a BD/DVD, the data
transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the Blu-ray Home Cinema) or an
analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to
noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital
signal from the player to your TV.
• What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via HDMI
from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV,
projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
• What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+
feature.
- If your Samsung TV has an
logo, then it supports the Anynet+ function.
- If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on
automatically and switch to HDMI mode.
- If you turn on the player and press the Play button with a disc already inserted, the TV will immediately turn on
and switch to HDMI mode.
METHOD 2 : Component Video .... (Better Quality)
If your television is equipped with Component Video inputs, connect a Component video cable(not
supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the Blu-ray Home
Cinema to the Component Video Input Jacks on your TV.
M
You can select from a variety of resolution settings such as 1080i, 720p, 576p/480p and 576i/480i,
depending on the disc type. (See page 41)
 The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI
cables are connected. The resolution may also be different depending on the disc. (See page 41)
 After making the video connection, set the Video input source on your TV to match the
corresponding Video output (HDMI, Component or Composite) on your Home Cinema.
See your TV owner's manual for more information on how to select the TV's Video Input source.
METHOD 3 : Composite Video ....... (Good Quality)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the Blu-ray Home Cinema
to the VIDEO IN jack on your TV.
M
The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the
SETUP menu. (See page 41)
 After making the video connection, set the Video input source on your TV to match the
corresponding Video output (HDMI, Component or Composite) on your Home Cinema.
See your TV owner's manual for more information on how to select the TV's Video Input source.
23
HT-BD2_NOGB.indd
23
2007-12-6
11:47:28
connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the main unit to the Audio Out of the external analog component.
• Be sure to match connector colors.
2. Press the AUX button on the remote control to select AUX input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
FM
Audio Cable (not supplied)
If the external analog component has
only one Audio Out, connect either left
or right.
M
You can connect the Video Output jack of your VCR to the TV, and connect the Audio
Output jacks of the VCR to this product.
24
HT-BD2_NOGB.indd
24
2007-12-6
11:47:29
GB
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL 1 or OPTICAL 2) on the main unit to the Digital Output of the
external digital component.
2. Press the D.IN button on the remote control to select D.IN 1 or D.IN 2 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
● CONNECTIONS
Optical Cable
(not supplied)
M
To see video from your Cable Box/Satellite receiver, you must connect it's video output
to a TV.
 This system supports Digital sampling frequencies of 32 kHz of higher from external digital
components.
25
HT-BD2_NOGB.indd
25
2007-12-6
11:47:31
connections
CONNECTING TO SAMSUNG'S FTP/INTERNET SITE FOR
SOFTWARE UPGRADES
Using the Direct LAN Cable (UTP cable), connect the LAN terminal on the rear of the Blu-ray Home Cinema to
the LAN terminal of your modem.
• Connect to the Internet for future software upgrades.
M
See pages 46~49 for the Software Upgrade procedure.
26
HT-BD2_NOGB.indd
26
2007-12-6
11:47:33
GB
CONNECTING THE FM ANTENNA
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
M
● CONNECTIONS
FM Antenna (supplied)
This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
27
HT-BD2_NOGB.indd
27
2007-12-6
11:47:35
basic functions of your
Blu-ray Home Cinema
This section introduces basic playback functions and playback by disc type.
BEFORE PLAYING
• Turn on your TV and set it to the correct Video Input (the input the
Blu-ray Home Cinema is connected to: HDMI, Component or Video).
After plugging in the player, the first time you press the
POWER button, this screen comes up:
MENU LANGUAGE SELECTION
!
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Drücken Sie 4 für Deutsch
Premere 5 per Italiano
Druk op 6 voor Nederlands
If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for
the first time.) If the language for the startup screen is not set,
the settings may change whenever you turn the power on or
off. Therefore, make sure that you select the language you
want to use. Once you select a menu language, you can
change it by pressing the STOP ( ) button on the front panel of the unit for more than 5 seconds with
no disc in the unit. Then the MENU LANGUAGE SELECTION window appears again where you can
reset your preferred language.
M
Discs which cannot be played on this player.
• BD-R
• BD-RE
• DVD+R
• DVD-ROM
• CD-ROM
• CVD
• Super Audio CD(except CD layer)
• HD DVD
• DVD+RW
• DVD-RAM
• CDV
• CD-I
• 8 cm MD (mini disc)
• CDGs play audio only, not graphics.
 Ability to play back may depend on recording conditions.
• DVD-R
• CD-RW/R
• DVD-RW (V mode)
• The unit may not play certain CD-R, CD-RW and DVD-R due to the disc type or
recording conditions.
 Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues with new
and existing format discs are possible. Not all discs are compatible and not every disc will
playback.
For additional information, refer to the Disc Type and Characteristics and Compliance and
Compatibility Notice sections of this Manual. If you encounter compatibility problems,
please contact the SAMSUNG customer care center.
 The unit cannot play CD-R/-RW and DVD-RW/-R recorded content such as divx, avi,
mpg, mov, wma.
28
HT-BD2_NOGB.indd
28
2007-12-6
11:47:38
GB
USING THE REMOTE CONTROL TO OPERATE THE BLU-RAY HOME
CINEMA OR YOUR SAMSUNG TV
The Blu-ray Home Cinema's remote can be used to control
Samsung TVs.
1. Plug the main unit's power cord into the AC power supply.
● BASIC FUNCTIONS
2. Press the BD RECEIVER button to switch to BD RECEIVER
mode to operate the Blu-ray Home cinema.
3. Press the FUNCTION button on the main unit or BD button
on the remote to enable BD/DVD playback.
4. Press the TV button to set the remote to TV mode.
5. Press the POWER button to turn on your Samsung TV with this remote.
6. Press the TV/VIDEO button to select VIDEO mode on your TV.
29
HT-BD2_NOGB.indd
29
2007-12-6
11:47:40
basic functions of your
Blu-ray Home Cinema
PLAYING A DISC
1. Insert a disc into the disc insert hole.
• Insert a disc so that the label side faces upward.
• Playback starts automatically.
2. To eject the disc, press the EJECT button.
• When you stop disc play, the player remembers where
you stopped, so when you press PLAY/PAUSE ( )
button again, it will pick up where you left off.
• Press the STOP ( ) button twice during playback to
disable the Resume function.
• To pause playback, press the PLAY/PAUSE ( )
button during playback. To resume, press the PLAY/PAUSE(
button once again.
M
)
If the player is left in the stop mode for more than 10 minutes without any pressing any buttons, a screen
saver will appear on your TV. If the player is left in the screen saver mode for more than 30 minutes, the
power will automatically turn off except during playback of an MP3/CDDA and/or JPEG. (Automatic
Power-Off Function)
 MP3/CDDA : if no button is pressed for more than 10 minutes, the screen saver appears.
 JPEG : the screen saver program or the auto power off function will be deactivated when playing a photo
file.
30
HT-BD2_NOGB.indd
30
2007-12-6
11:47:41
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.
Searching through a Chapter or Track
During playback, press the SEARCH (
hZCV
) button.
● BASIC FUNCTIONS
• If you want to search at a faster speed on the BD/DVD, press
this button.
• If you press the SEARCH ( ) button,
 X2  X4  X8  X16  X32  X128
• If you press the SEARCH ( ) button,
 X2  X4  X8  X16  X32  X128
M
No sound is heard during search mode.
 MP3 discs cannot be searched.
hZCV
Skipping Tracks
During playback, press the SKIP (
GB
USING THE SEARCH AND SKIP FUNCTIONS
) button.
When playing a BD/DVD, if you press the SKIP ( ) button, it
moves to the next chapter. If you press the SKIP ( ) button, it
moves to the beginning of the chapter. One more press makes it
move to the beginning of the previous chapter.
SLOW MOTION PLAY/STEP MOTION PLAY
Slow Motion Play
hZCV
In pause or step mode, press the SLOW button on the
remote control for Slow Motion play.
• If you press the SLOW button,  1/8  1/4  1/2
• To return to normal speed playback, press the
PLAY/PAUSE ( ) button.
M
This (
) icon indicates an invalid button press.
 No sound is heard during slow mode.
 Slow motion operates only in the forward direction.
Step Motion Play
hZCV
Press the STEP button on the remote control during play for Step
Motion play.
• Each time the button is pressed a new frame will appear.
• When the STEP button is pressed, the next frame will be
activated.
• Press the PLAY/PAUSE ( ) button to resume normal play.
M
No sound is heard during step mode.
 Step motion operates only in the forward direction.
HT-BD2_NOGB.indd
31
31
2007-12-6
11:47:42
system setup
For your convenience, you can set this Blu-ray Home Cinema's features for the
best use in your home environment.
ON-SCREEN MENU NAVIGATION
32
HT-BD2_NOGB.indd
32
2007-12-6
11:47:45
GB
SETTING UP THE LANGUAGE OPTIONS
If you set the audio, subtitle, disc menu and player menu, in advance, they will come up automatically every time
you watch a movie.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Photo
No Disc
Setup
: Original
: Automatic
Display Setup
Disc Menu
: English
HDMI Setup
Menu
: English
Language Setup
Audio
: Original
Original
Audio Setup
Subtitle
Display Setup
Disc Menu
English
: Automatic
Français
: Deutsch
English
HDMI Setup
Menu
: Español
English
System Upgrade
Photo
No Disc
Audio : For the disc audio language.
Subtitle : For the disc subtitles.
Disc Menu : For the disc menu contained on the disc.
Menu : For the on-screen menu of your Blu-ray Home
Cinema.
Subtitle
Parental Setup
4. Press the ▲▼ buttons to select the desired language
option, press the ENTER or ► button.
•
•
•
•
Audio
Audio Setup
● SYSTEM SETUP
3. Press the ▲▼ buttons to select Language Setup,
then press the ENTER or ► button.
• Language setup menu will be displayed.
Language Setup
Setup
Parental Setup
Italiano
System Upgrade
5. Press the ▲▼ buttons to select the desired language,
then press the ENTER button.
M
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to
exit the menu.
 The selected language will only appear if it is supported on the disc.
33
HT-BD2_NOGB.indd
33
2007-12-6
11:47:46
system setup
SETTING UP THE AUDIO OPTIONS
Allows you to set up the system's audio features.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
No Disc
Photo
Language Setup
Setup
Audio Setup
Dynamic Compression : On
Display Setup
AV Sync
HDMI Setup
Speaker Setup
Parental Setup
Speaker Distance
System Upgrade
Sound Edit
3. Press the ▲▼ buttons to select Audio Setup, then press
the ENTER or ► button.
• Audio setup menu will be displayed.
4. Press the ▲▼ buttons to select Dynamic Compression or
AV Sync, then press the ENTER or ► button.
No Disc
Photo
Language Setup
Setup
Audio Setup
Dynamic Compression : On
On
Display Setup
AV Sync
HDMI Setup
Speaker Setup
Parental Setup
Speaker Distance
System Upgrade
Sound Edit
5. Press the ▲▼ buttons to select the desired item, then
press the ENTER button.
M
: 50msec
Off
Press the RETURN or ◄ button to return to the previous menu.
Press the MENU button to exit the menu.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• On : When Movie soundtracks are played at low volume
or from smaller speakers, the system can apply
appropriate compression to make low-level content more
intelligible and prevent dramatic passages from getting
too loud.
• Off : You can enjoy the movie with the standard Dynamic
Range.
No Disc
Photo
Language Setup
Setup
Audio Setup
Dynamic Compression : On
On
Display Setup
AV Sync
HDMI Setup
Speaker Setup
Parental Setup
Speaker Distance
System Upgrade
Sound Edit
Photo
Language Setup
Dynamic Compression : On
Setup
Audio Setup
AV Sync
Display Setup
Speaker Setup
HDMI Setup
Speaker Distance
Parental Setup
Sound Edit
Off
AV Sync
Video may look slower than the audio when the player is
connected to a digital TV. If this occurs, adjust the audio
delay time to match the video.
• You can set the audio delay time between 0 ms and 300
ms. Set it to the optimal status.
No Disc
0msec
25msec
System Upgrade
50msec
75msec
100msec
125msec
34
HT-BD2_NOGB.indd
34
2007-12-6
11:47:51
GB
SETTING UP THE SPEAKER OPTIONS
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted according to
the system's speaker configuration and whether certain speakers are used or not.
1. With the unit in Stop mode, press the MENU button.
No Disc
Photo
Language Setup
Setup
Audio Setup
Dynamic Compression : On
Display Setup
AV Sync
HDMI Setup
Speaker Setup
Parental Setup
Speaker Distance
System Upgrade
Sound Edit
3. Press the ▲▼ buttons to select Audio Setup, then press
the ENTER or ► button.
• Audio setup menu will be displayed.
4. Press the ▲▼ buttons to select Speaker Setup, then
press the ENTER or ► button.
5. Press the ▲▼buttons to select the Surround Back, then
press the ENTER button.
• For Surround Back, each time ENTER button is
pressed, the mode switches alternately as follows :
Small ➞ None.
• For Front, Subwoofer, Center and Surround, the mode is
set to Present.
6. When done, use the ▲▼◄► buttons to select Save, then
press the ENTER button.
If you don’t want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
● SYSTEM SETUP
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
: 50msec
Dynamic Compression : On
No Disc
Photo
Language Setup
AV Sync
Setup
Audio Setup
Speaker Setup
Display Setup
Speaker Distance
HDMI Setup
Sound Edit
: 50msec
Parental Setup
System Upgrade
Dynamic Compression : On
No Disc
Photo
Language Setup
AV Sync
Setup
Audio Setup
Speaker Setup
Display Setup
Speaker Distance
HDMI Setup
Sound Edit
: 50msec
Parental Setup
System Upgrade
M
Press the RETURN button to return to the previous menu.
35
HT-BD2_NOGB.indd
35
2007-12-6
11:47:58
system setup
SETTING UP THE SPEAKER OPTIONS
Speaker Setup
Front (L, R)
Present
Subwoofer (LFE)
Present
Center (C)
Present
Surround (SL, SR)
Present
Surround Back (SBR, SBL)
Small, None
Speaker
• Small/Present : Bass below 100Hz will be outputted through the Subwoofer instead of the speakers.
• None : Select to disable the speakers.
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
Press the RED(A) button
• A test tone will be sent to L C R SR SBR SBL SL LFE in order so you can make sure the
speakers are set up correctly.
• To end the test tone, press the RED (A) button again.
Dynamic Compression : On
No Disc
Photo
Language Setup
AV Sync
Setup
Audio Setup
Speaker Setup
Display Setup
Speaker Distance
HDMI Setup
Sound Edit
: 50msec
Parental Setup
System Upgrade
M • When playing a BD/DVD or CD, this will work only in Stop mode.
• Use this function to check that each speaker is correctly connected and that there is no
problem.
• When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is
not available.
36
HT-BD2_NOGB.indd
36
2007-12-6
11:48:04
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay
time of the audio signals from the front, subwoofer, center, surround and surround back speakers.
GB
Setting the Speaker Distance
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
Photo
Language Setup
Setup
Audio Setup
Dynamic Compression : On
Display Setup
AV Sync
HDMI Setup
Speaker Setup
Parental Setup
Speaker Distance
System Upgrade
Sound Edit
3. Press the ▲▼ buttons to select Audio Setup,
then press the ENTER or ► button.
: 50msec
● SYSTEM SETUP
ENTER or ► button.
No Disc
• Audio setup menu will be displayed.
4. Press the ▲▼ buttons to select Speaker Distance,
then press the ENTER or ► button.
5. Press the ▲▼ buttons to select the desired Speaker,
then press the ◄► buttons to set the Speaker Distance.
AV Sync
No Disc
Photo
Language Setup
Speaker Setup
Setup
Audio Setup
Speaker Distance
Display Setup
Sound Edit
: 50msec
HDMI Setup
• You can set the Speaker Distance between 0.3m(1ft) and
9m(30ft).
Parental Setup
System Upgrade
6. When done, use the ▲▼◄► buttons to select Save,
then press the ENTER button.
If you don’t want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
AV Sync
No Disc
Photo
Language Setup
Speaker Setup
Setup
Audio Setup
Speaker Distance
Display Setup
Sound Edit
: 50msec
HDMI Setup
Parental Setup
System Upgrade
M
Press the RETURN button to return to the previous menu.
37
HT-BD2_NOGB.indd
37
2007-12-6
11:48:06
system setup
SETTING UP THE SPEAKER OPTIONS
Setting the Sound Edit
You can adjust the balance and level for each speaker.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
3. Press the ▲▼ buttons to select Audio Setup, then press
the ENTER or ► button.
No Disc
Photo
Language Setup
Setup
Audio Setup
Dynamic Compression : On
Display Setup
AV Sync
HDMI Setup
Speaker Setup
Parental Setup
Speaker Distance
System Upgrade
Sound Edit
• Audio setup menu will be displayed.
4. Press the ▲▼ buttons to select Sound Edit,
then press the ENTER or ► button.
5. Press the ▲▼ buttons to select the desired Speaker,
then press the ◄► button to adjust the settings.
: 50msec
Speaker Setup
No Disc
Photo
Language Setup
Speaker Distance
Setup
Audio Setup
Sound Edit
Display Setup
HDMI Setup
6. When done, use the ▲▼◄► buttons to select Save,
then press the ENTER button.
If you don’t want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
Parental Setup
System Upgrade
Speaker Setup
No Disc
Photo
Language Setup
Speaker Distance
Setup
Audio Setup
Sound Edit
Display Setup
HDMI Setup
Parental Setup
System Upgrade
M
Press the RETURN button to return to the previous menu.
Adjusting Front/Surround/Surround Back Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Surround/Surround Back/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
38
HT-BD2_NOGB.indd
38
2007-12-6
11:48:12
This function allows you to set up the TV screen settings. This function depends on the disc or TV type. It may not
work with some discs or TVs.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Language Setup
No Disc
Photo
Audio Setup
Setup
Display Setup
TV Aspect
: 16:9 Wide
HDMI Setup
Movie Frame (24 Fs)
: Off
Parental Setup
Resolution
: 480p
System Upgrade
Screen Message
: On
4. Press the ▲▼ buttons to select the desired display option
then press the ENTER or ► button.
M
Language Setup
No Disc
Photo
Audio Setup
Setup
Display Setup
TV Aspect
: 4:3
16:9Letter
WideBox
HDMI Setup
Movie Frame (24 Fs)
Parental Setup
Resolution
4:3 Pan-Scan
: Off
16:9 Wide
: 576p/480p
System Upgrade
Screen Message
: On
● SYSTEM SETUP
3. Press the ▲▼ buttons to select Display Setup, then
press the ENTER or ► button.
• Display setup menu will be displayed.
5. Press the ▲▼ buttons to select the desired sub-menu
item from a display option, then press the ENTER button.
GB
SETTING UP THE VIDEO DISPLAY/OUTPUT OPTIONS
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to
exit the menu.
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box :
Select when you want to see the total
16:9 ratio screen BD/DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the top
and bottom of the screen.
Language Setup
No Disc
Photo
Audio Setup
Setup
Display Setup
TV Aspect
: 4:3
16:9Letter
WideBox
HDMI Setup
Movie Frame (24 Fs)
Parental Setup
Resolution
4:3 Pan-Scan
: Off
16:9 Wide
: 576p/480p
System Upgrade
Screen Message
: On
• 4:3 Pan-Scan :
Select this for conventional size TV when
you want to see the central portion of the
16:9 screen. (Extreme left and right side
of movie picture will be cut off.)
• 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
M
Depending on the disc type, some aspect ratios may not be available.
 Certain movies will be displayed in 4:3 Pillarbox (black bars on sides of picture) even if 16:9
wide is selected.
39
HT-BD2_NOGB.indd
39
2007-12-6
11:48:18
system setup
Movie Frame (24 Fs)
Movies are usually filmed at 24 frames per second. Some Bluray Discs have the capability of playing back at this frame rate.
Setting the Movie Frame (24Fs) feature to ON allows you to
adjust the Blu-ray player's HDMI output to 24 frames per
second for improved picture quality.
Language Setup
No Disc
Photo
Audio Setup
TV Aspect
: 16:9 Wide
Setup
Display Setup
Movie Frame (24 Fs)
: On
Off
HDMI Setup
Resolution
Off
: 576p/480p
Parental Setup
Screen Message
: On
System Upgrade
You can enjoy the Movie Fame (24Fs) feature solely on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of source may be included:
Movie material (24 frame) and Video material (30 frame). When
switching the source between Movie and Video, the screen
may blink for a few seconds.
Resolution
Sets the output resolution of the Component and HDMI video signal.
• The number in 576i/480i, 576p/480p, 720p, 1080p and
1080i indicates the number of lines of video. The i and p
indicate interlace and progressive scan, respectively.
No Disc
Language Setup
TV Aspect
: 16:9 Wide
Photo
Audio Setup
Movie Frame (24 Fs)
: Off
Setup
Display Setup
Resolution
: 1080p
576p/480p
HDMI Setup
Screen Message
1080i
: On
720p
- 1080p : Outputs 1080 lines of progressive video.
Parental Setup
576p/480p
System Upgrade
576i/480i
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 576p/480p : Outputs 480 lines progressive video.
- 576i/480i : Outputs 480 lines of interlaced video.
M
Component does not output 1080p.
If the connected TV does not support the movie frame
or the selected resolution, you will see the following message:
If you select Yes and the resolution is not supported,
the TV's screen will be blank.
Photo
No Disc
Setup
Language Setup
TV Aspect
: 16:9 Wide
Audio Setup
Movie Frame (24 Fs)
: Off
Display Setup
Resolution
: 576p/480p
1080p
If no pictures are shown after the selection,
1080i
please
for 15 seconds.
AndMessage
then,
HDMI wait
Setup
Screen
: On
720p
the resolution will be reverted
Setupvalue automatically.
Front Display
: Automatic
toParental
the previous
576p/480p
System
Would
youUpgrade
like to make a selection?
576i/480i
Yes
M
No
If the screen is blank, press and hold the STOP ( ) button on the front of the player for
more than 5 seconds (no disc inserted). All settings are restored to the factory default.
Follow the steps on the previous page to access each mode and select the Display Setup
that your TV will support.
40
HT-BD2_NOGB.indd
40
2007-12-6
11:48:24
GB
Resolution according to the output mode
• BD playback
Output
Component
VIDEO
1080p, Movie Frame(24Fs) off
[email protected]
1080i
576i/480i
1080p/1080i, Movie Frame (24Fs) on
[email protected]
1080i
576i/480i
1080i, Movie Frame (24Fs) off
1080i
1080i
576i/480i
720p
720p
720p
576i/480i
576p/480p
576p/480p
576p/480p
576i/480i
576i/480i
576p/480p
576i/480i
576i/480i
HDMI
Component
VIDEO
1080p
[email protected]
576p/480p
576i/480i
1080i
1080i
576p/480p
576i/480i
720p
720p
576p/480p
576i/480i
576p/480p
576p/480p
576p/480p
576i/480i
576i/480i
576p/480p
576i/480i
576i/480i
● SYSTEM SETUP
HDMI
Setup
• DVD playback
Output
Setup
M
This player has the HDMI Auto Detect Feature. When the player is first connected to a TV
via HDMI, the player's output will be set automatically to HDMI.
 If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or
Movie Frame (24 Fs).
 The BD disc must have the 24 frame feature in order to use the Movie Frame (24 Fs)
mode.
 If you have both HDMI and Component cables connected to your TV, the Component
resolution may differ from the chart above.
 In DVD playback, if both HDMI and Component jacks are connected and you select the
Component mode, the Display Setup menu will show the output resolution as 1080p. The
resolution is actually 576p/480p.
 If the resolution is set to ‘I’ (ex: 576i/480i or 1080i), the output is displayed in 30 frames per second
and if set to ‘p’ (ex: 576p/480p, 720p, 1080p), it will be displayed in 60 frames per second.
i : interlaced mode (30 frames)
p : progressive mode (60 frames)
Screen Message
• On : Displays messages related to operation mode.
• Off : Does not display messages related to operation mode.
No Disc
Language Setup
Movie Frame (24 Fs)
Photo
Audio Setup
Resolution
: Off
: 1080i
Setup
Display Setup
Screen Message
: On
On
Off
HDMI Setup
Parental Setup
System Upgrade
41
HT-BD2_NOGB.indd
41
2007-12-6
11:48:30
system setup
SETTING UP THE HDMI SETUP OPTIONS
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Audio Setup
No Disc
3. Press the ▲▼ buttons to select HDMI Setup, then press
the ENTER or ► button.
• HDMI setup menu will be displayed.
Photo
Display Setup
Setup
HDMI Setup
Parental Setup
System Upgrade
4. Press the ▲▼ buttons to select the desired HDMI option
(Format or HDMI Audio), then press the ENTER or ►
button.
5. Press the ▲▼ buttons to select the desired sub-menu item
from a HDMI option, then press the ENTER button.
M
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to exit the menu.
Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's
remote control, Anynet + can be used by connecting this Home Cinema to a SAMSUNG TV using an
HDMI Cable. (This is only available with SAMSUNG TVs that support Anynet+.)
What is Anynet+?
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your
Samsung TV's remote control.
1. Connect the main unit of the Home Cinema to a Samsung TV with an HDMI cable. (See page 22)
2. Set the Anynet+ function on your TV. (See the TV instruction manual
for more information.)
• You can operate the Home Cinema by using the TV remote
control. (Available TV buttons :
buttons,
,
,
,
▲,▼ and ,◄,►
button)
MOVE
ENTER
EXIT
MOVE
Select THEATER to connector and set the option of each items below.
• View TV : If Anynet+ (HDMI-CEC) is on and you select View TV, the
Home Cinema will automatically switch to DIGITAL IN.
• THEATER Menu : You can access the Home Cinema menu.
• THEATER Operation : The Home Cinema disc playback information will be displayed.
• Receiver : On : You can listen to audio through the Home Cinema.
• Receiver : Off : You can listen to audio through the TV.
ENTER
EXIT
If you select TV
Set the Anynet+(HDMI-CEC) function to On on your TV.
• Receiver : On : You can listen to audio through the Home Cinema.
• Receiver : Off : You can listen to audio through the TV.
If you select the THEATER
M
If you want to listen to TV sound through the Home Cinema system, connect the optical cable
from the TV to the OPTICAL 1 port of the system.
 If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.
 Anynet+ (HDMI-CEC) will only work while in the DVD mode.
42
HT-BD2_NOGB.indd
42
2007-12-6
11:48:33
GB
Format
You can optimize the HDMI output for connection to a TV or
Monitor.
• TV : Select if connected to a TV via HDMI.
Audio Setup
No Disc
Photo
Display Setup
Setup
HDMI Setup
Format
Parental Setup
HDMI Audio
• Monitor : Select if connected to a Monitor via HDMI.
: TV
TV
Monitor
: On
System Upgrade
If the player is connected to a TV, the Monitor option is
unavailable.
● SYSTEM SETUP
HDMI Audio
The audio signals transmitted over the HDMI Cable can be
toggled ON/OFF.
Photo
Display Setup
Format
: TV
• On : Both video and audio signals are transmitted over the
Setup
HDMI Setup
HDMI Audio
: On
On
Audio Setup
No Disc
Off
HDMI connection cable, and audio is output through
Parental Setup
System Upgrade
your TV speakers only.
• Off : Video is transmitted over the HDMI connection cable
only, and audio is output through the Home Cinema
speakers only.
M
The default setting of this function is HDMI Audio Off.
 HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
43
HT-BD2_NOGB.indd
43
2007-12-6
11:48:40
system setup
SETTING UP THE PARENTAL LOCK
The Parental Lock function works in conjunction with BD/DVDs that have been assigned a rating which helps you
control the types of BD/DVDs that your family watches. There are up to 8 rating levels on a disc.
hZ
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
3. Press the ▲▼ buttons to select Parental Setup, then
press the ENTER or ► button.
• When you operate your Blu-ray Home Cinema for the
first time, the “Enter New password” message will be
displayed.
4. Enter the 4-digit password using the number buttons on
the remote control.
The “Confirm the password” message will be displayed.
Enter your password again.
Display Setup
Photo
No Disc
HDMI Setup
Parental Setup
Setup
Parental Setup
System Upgrade
Enter New password.
« NUMBER
² RETURN
Display Setup
Photo
No Disc
HDMI Setup
Parental Setup
Setup
Parental Setup
System Upgrade
Confirm the password.
5. Press the ENTER or ► button to select Parental Lock.
« NUMBER
6. Press the ▲▼ buttons to select On or Off, then press the
ENTER button.
² RETURN
Display Setup
No Disc
Photo
HDMI Setup
Setup
Parental Setup
Parental Lock
: Off
System Upgrade
Rating Level
: 1 (Kids)
New Password
M
Press the RETURN or ◄ button to return to the previous menu.
Press the MENU button to exit the menu.
If you forgot your password
1. Remove the disc.
2. Press and hold the STOP ( ) button on the front panel for 5 seconds or more.
• All settings will revert to the factory settings.
44
HT-BD2_NOGB.indd
44
2007-12-6
11:48:44
1. Press the ▲▼ buttons to select Rating Level, then press
the ENTER or ► button.
GB
Setting the Rating Level
Display Setup
No Disc
Photo
HDMI Setup
Parental Lock
: Off
Setup
Parental Setup
Rating Level
:8 8(Adults)
(Adults)
System Upgrade
New Password
7
6
5
4
3
2
1 (Kids)
● SYSTEM SETUP
2. Press the ▲▼ buttons to select the rating level you want,
then press the ENTER button.
• For example, if you select up to Level 6, discs that
contain Level 7, 8 will not play.
A larger number indicates that the program is intended
for adult use only.
Level 1 is the most restrictive and Level 8 is the least.
Display Setup
No Disc
Photo
HDMI Setup
Parental Lock
: Off
Setup
Parental Setup
Rating Level
: 1 (Kids)
System Upgrade
New Password
Changing the Password
1. Press the ▲▼ buttons to select New Password, then
press the ENTER or ► button.
No Disc
Display Setup
Parental Lock
: Off
Photo
HDMI Setup
Rating Level
: 1 (Kids)
Setup
Parental Setup
New Password
System Upgrade
2. Enter the 4-digit password using the number buttons on
the remote control. The “Confirm the password.” message
will be displayed.
Photo
No Disc
Display Setup
Parental Lock
: Off
HDMI Setup
Rating Level
: 1 (Kids)
New Password
Parental Setup
Setup
Parental Setup
System Upgrade
Enter New password.
« NUMBER
3. Enter your password again using the number buttons on
the remote control.
Photo
No Disc
² RETURN
Display Setup
Parental Lock
: Off
HDMI Setup
Rating Level
: 1 (Kids)
New Password
Parental Setup
Setup
Parental Setup
System Upgrade
Confirm the password.
« NUMBER
² RETURN
45
HT-BD2_NOGB.indd
45
2007-12-6
11:48:50
system upgrade
Samsung may offer upgrades to your Blu-ray player's firmware in the future. To upgrade this firmware you must :
1. Go to samsung.com and refer to 'SUPPORT' page to download the firmware and burn an update CD.
or
2. Connect this player's LAN terminal to the LAN terminal on your modem (see page 26) and follow the steps
below.
FIRMWARE UPGRADE
1. With the unit in No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER
or ► button.
No Disc
HDMI Setup
System Information
Photo
Parental Setup
Network Setup
Setup
System Upgrade
Upgrade Start
HDMI Setup
System Information
Parental Setup
Network Setup
3. Press the ▲▼ buttons to select System Upgrade, then press
the ENTER or ► button.
4. Press the ▲▼ buttons to select Upgrade Start, then press the
ENTER or ► button.
5. You will see a window that allows you to check the cable or
network connection status.
Photo
No Disc
Setup
System Upgrade
System Upgrade
Upgrade Start
1 2 3 4
Now, Checking.
Please wait...
 If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
Photo
No Disc
Setup
HDMI Setup
System Information
Parental Setup
Network Setup
System Upgrade
System Upgrade
Upgrade Start
The new update data was found.
Current Version : XXXXX
New Version : XXXXX
Start
 If the upgrade is not possible : You will see the following
Photo
Cancel
HDMI Setup
System Information
Parental Setup
Network Setup
description in the message box.
• If the cable is not connected :
"This system can not connect to internet for update.
Please, check the network setup."
• If the network connection has failed :
"This system can not connect to internet for update.
Please, check the network setup"
• If no later version has been released (the latest version has been already installed) :
"The latest version of the firmware is already installed. There is no need to update."
• If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
No Disc
Setup
System Upgrade
System Upgrade
Upgrade Start
This system can not connect
to internet for update.
Please, check the network setup.
OK
46
HT-BD2_NOGB.indd
46
2007-12-6
11:48:59
Photo
No Disc
Setup
HDMI Setup
System Information
Parental Setup
Network Setup
System Upgrade
System Upgrade
GB
6. To perform the system upgrade, press the ◄► buttons to
select Start and then press the ENTER button.
Upgrade Start
The new update data was found.
Current Version : XXXXX
New Version : XXXXX
Start
7. The system update gets started.
No Disc
Setup
HDMI Setup
System Information
Parental Setup
Network Setup
System Upgrade
System Upgrade
● SYSTEM UPGRADE
Photo
Cancel
Upgrade Start
Downloading update data...
Please, do not turn off the power.
Cancel
Photo
No Disc
Setup
HDMI Setup
System Information
Parental Setup
Network Setup
System Upgrade
System Upgrade
Upgrade Start
1 2 3 4
Verifying update data
Please wait...
8. When the verification is done, you will see a window that
allows you to update firmware. To perform the firmware
update,press the ◄► buttons to select Yes and then press
the ENTER button.
Photo
No Disc
Setup
HDMI Setup
System Information
Parental Setup
Network Setup
System Upgrade
System Upgrade
Upgrade Start
Do you want to update Firmware?
Yes
No
• You will see a message about the upgrade process for
3 seconds.
- When update is finished, the power will turn off.
• If you do not want to update firmware, select No and then
press the ENTER button.
9. When the installation is done, you will see a
“Update Completed” message.
• The player will automatically turn off in 3 seconds.
• Please turn the player on, then press the STOP button
5 seconds to intialize the player.
• If you intialize the player, all settings will revert to the factory
settings. You will see the menu language selection window.
M
Photo
No Disc
Setup
HDMI Setup
System Information
Parental Setup
Network Setup
System Upgrade
System Upgrade
Upgrade Start
Update completed.
If you want to cancel the upgrade while it is in process, press the ENTER button.
You will see a confirmation message.
Selecting Yes will end the upgrade process, and selecting No will proceed with the verification
step.
 When the system upgrade is done, check the firmware details in the System Upgrade menu.
 Do not turn off the player during the System Upgrade Otherwise, the player may not work
properly.
 When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the
upgrade.
47
HT-BD2_NOGB.indd
47
2007-12-6
11:49:06
system upgrade
SYSTEM INFORMATION
When the firmware upgrade is done, check the firmware details by following the steps below.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
HDMI Setup
No Disc
Photo
Parental Setup
Setup
System Upgrade
Network Setup
3. Press the ▲▼ buttons to select System Upgrade, then
press the ENTER or ► button.
4. Press the ▲▼ buttons to select System Information,
then press the ENTER or ► button.
• You can see detailed information about the current
firmware.
System Information
Upgrade Start
HDMI Setup
Photo
No Disc
Setup
Parental Setup
System Upgrade
System Information
System Information
Network Setup
S/W: XXXXXX_XX_XXX
Upgrade Start
Region:B/02(BD/DVD)
5. Press the ENTER button to select OK.
• System Upgrade menu will be displayed.
OK
NETWORK SETUP
In some rare cases, the firmware upgrade may not succeed.
If this occurs, you may need to set up your IP address, Subnet, Mask, Gateway and DNS by following the steps below.
HDMI Setup
To setup, follow steps 1 and 3 above
4. Press the ▲▼ buttons to select Network setup, then
press the ENTER or ► button.
• You will see a menu that allows you to make network
settings.
No Disc
Photo
Parental Setup
System Information
Setup
System Upgrade
Network Setup
Upgrade Start
HDMI Setup
5. Press the ▲▼ buttons to select DHCP, then press the
ENTER button.
No Disc
Parental Setup
Photo
Network Setup
System Information
Setup DHCP System Upgrade
: On
Network Setup
IP Address
Subnet Mask
Gateway
DNS
Primary DNS
Secondary DNS
:
:
:
:
:
:
Save
000 . 000 . 000 . 000
Start
255 . Upgrade
255 . 255
. 000
000 . 000 . 000 . 000
Automatic
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Cancel
s SELECT
M
² RETURN
If DHCP is set to On, you can't select IP Address, Subnet Mask or Gateway.
 If DNS is set to Automatic, you can’t select Primary/ Secondary DNS.
48
HT-BD2_NOGB.indd
48
2007-12-6
11:49:14
6. Press the ▲▼ buttons to select a desired item, then press the ENTER button.
GB
• If DHCP is set to Off and DNS is set to Manual
HDMI Setup
No Disc
Parental Setup
Photo
Network Setup
System Information
Setup DHCP System Upgrade
: Off
Network Setup
IP Address
Subnet Mask
Gateway
DNS
Primary DNS
Secondary DNS
:
:
:
:
:
:
000 . 000 . 000 . 000
Start
255 . Upgrade
255 . 255
. 000
000 . 000 . 000 . 000
Manual
000 . 000 . 000 . 000
000 . 000 . 000 . 000
● SYSTEM UPGRADE
Save
Setup available
Cancel
s SELECT
² RETURN
• If DHCP is set to On and DNS is set to Manual
HDMI Setup
No Disc
Parental Setup
Photo
Network Setup
System Information
Setup DHCP System Upgrade
: On
Network Setup
IP Address
Subnet Mask
Gateway
DNS
Primary DNS
Secondary DNS
:
:
:
:
:
:
000 . 000 . 000 . 000
Start
255 . Upgrade
255 . 255
. 000
000 . 000 . 000 . 000
Manual
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Save
Setup not available
Setup available
Cancel
s SELECT
² RETURN
• If DHCP is set to On and DNS is set to Automatic
HDMI Setup
No Disc
Parental Setup
Photo
Network Setup
System Information
Setup DHCP System Upgrade
: On
Network Setup
IP Address
Subnet Mask
Gateway
DNS
Primary DNS
Secondary DNS
:
:
:
:
:
:
Save
000 . 000 . 000 . 000
Start
255 . Upgrade
255 . 255
. 000
000 . 000 . 000 . 000
Automatic
000 . 000 . 000 . 000
000 . 000 . 000 . 000
Cancel
s SELECT
M
Setup not available
² RETURN
When you select an item, use the number and ▲▼◄► buttons.
7. When done, use the ▲▼ buttons to select Save, then press the ENTER button.
8. If you don’t want to save your work, use the ▲▼◄► buttons to select Cancel, then press the
ENTER button.
M
The IP address used in this manual is for illustrative purposes only. You must refer to the
your network settings for the actual IP address.
49
HT-BD2_NOGB.indd
49
2007-12-6
11:49:21
watching a movie
USING THE DISPLAY FUNCTION
hZCV
1. During playback, press the INFO button on the remote
control.
2. Press the ▲▼ buttons to select the desired item.
3. Press the ◄► buttons to make the desired setup and then
press the ENTER button.
• You may use the number buttons of the remote control
to directly access a title, chapter or to start the playback
from a desired time.
BD
Info
Title
: 001/006
Chapter
: 001/016
Playing Time : 00:04:17
Audio
: ENG Multi CH
Subtitle
: Off
Angle
: 01/01
§ CHANGE
s SELECT
4. To make the screen disappear, press the INFO button again.
M
If you are playing contents from the Info menu, in some cases, playback may malfunction
depending on the title.
 Title : To access the desired title when there is more than one in the disc. For example, if
there is more than one movie on a BD/DVD, each movie will be identified as a Title.
 Chapter: Most BD/DVD discs are recorded in chapters so that you can quickly find a
specific passage.
 Playing Time : Allows playback of the film from a desired time. You must enter the starting
time as a reference. The time search function does not operate on some discs.
 Audio : Refers to the film's soundtrack language. A BD disc can contain up to 32 audio
languages and a DVD up to 8.
 Subtitle : Refers to the subtitle languages available in the disc. You will be able to choose
the subtitle languages or, if you prefer, turn them off from the screen. A BD disc can
contain up to 255 subtitle languages, and a DVD up to 32.
 Angle : When a BD/DVD contains multiple angles of a particular scene, you can use the
ANGLE function.
50
HT-BD2_NOGB.indd
50
2007-12-6
11:49:27
GB
USING THE DISC MENU & POPUP/TITLE MENU
hZ
Using the Disc Menu
1. During playback, press the DISC MENU button on the
remote control.
PLAY MOVIE
LANGUAGES
▼
3
M
PREVIEWS
4
5
6
7
8
9
10
11
12
13
14
15
Depending on the disc, the Disc Menu may not be
available.
● WATCHING A MOVIE
2. Press the ▲▼◄► buttons to make the desired setup,
then press the ► or ENTER button.
• The Disc menu setup items may vary from disc to disc.
SCENE SELECTIONS
Z
Using the Title Menu
1. During playback, press the TITLE MENU button on the
remote control.
2. Press the ▲▼◄► buttons to make the desired setup, then
press the ENTER button.
• The Title menu setup options may vary from disc to disc.
M
Depending on the disc, the Title Menu may not be
available.
 Title Menu will only be displayed if there are at least two titles in the disc.
h
Using the Popup Menu
1. During playback, press the POPUP MENU button on the
remote control.
MAIN MENU
AUDIO SET UP
2. Press the ▲▼◄► buttons or ENTER button to select the
desired menu.
• The Popup menu setup options may vary from disc to
disc.
SCENE SELECTIONS
▼
3
M
SUBTITLES
4
5
6
7
8
9
10
11
12
13
14
15
Depending on the disc, the Popup Menu may not
be available.
51
HT-BD2_NOGB.indd
51
2007-12-6
11:49:29
watching a movie
REPEAT PLAY
Repeat the current chapter or title.
hZCV
Repeat playback
1. During playback, press the REPEAT button on the remote
control.
• Repeat screen appears.
Repeat
Off
2. Press the ▲▼ buttons to select Chapter or Title.
• BD/DVD repeats play by chapter or title.
3. To return to normal play, press the REPEAT button again,
then press the ▲▼ buttons to select Off.
M
Depending on the disc, the Repeat function may not be available.
Using the A-B Repeat function
hZCV
1. Press the REPEAT A-B button on the remote control.
2. Press the REPEAT A-B button at the point where you want
repeat play to start (A).
3. Press the REPEAT A-B button at the point where you want
repeat play to stop (B).
4. To return to normal play, press the CANCEL button.
M
Point B cannot be set until 5 seconds of playback has elapsed from point A.
52
HT-BD2_NOGB.indd
52
2007-12-6
11:49:37
You can select a desired audio language and audio format quickly and easily with the AUDIO button.
GB
hZ
SELECTING THE AUDIO LANGUAGE
Using the AUDIO button
1. Press the AUDIO button during playback.
• The Audio changes when the button is pressed repeatedly.
• The audio languages are represented by abbreviations.
Audio
ENG Dolby Digital Multi CH
● WATCHING A MOVIE
2. To remove the AUDIO icon, press the CANCEL or
RETURN button.
Using the INFO button
1. During playback, press the INFO button on the remote
control.
2. Press the ▲▼ buttons to select Audio.
3. Press the ◄► buttons on the remote control to select the
desired audio.
M
This function depends on what audio languages are encoded on the disc and may not be available.
 A BD disc can contain up to 32 audio languages and a DVD up to 8.
 Depending on the disc type, you can use the Audio button to change the audio sound
track as well as the audio language.
Some Blu-ray Discs may allow you to select multi-channel LPCM, Dolby digital audio English
sound tracks and HD audio formats like Dolby digital+, Dolby TrueHD or DTS-HD.
hZ
SELECTING THE SUBTITLE LANGUAGE
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
1. Press the SUBTITLE button.
• The subtitle changes when the button is pressed
repeatedly. The subtitle languages are represented by
abbreviations.
Subtitle
ENG
2. To remove the SUBTITLE icon, press the CANCEL or
RETURN button.
Using the INFO button
1. During playback, press the INFO button on the remote control.
2. Press the ▲▼ buttons to select Subtitle.
3. Press the ◄► buttons on the remote control to select the
desired subtitle language.
M
Depending on BD/DVDs, you may have to change the desired subtitle in the Disc Menu. Press the
DISC MENU button.
 This function depends on what subtitles are encoded on the disc and may not be available on all BD/DVDs.
 A BD disc can contain up to 255 subtitle languages and a DVD up to 32.
53
HT-BD2_NOGB.indd
53
2007-12-6
11:49:39
watching a movie
CHANGING THE CAMERA ANGLE
When a BD/DVD contains multiple angles of a particular scene, you can use the ANGLE function.
hZ
Using the ANGLE function
1. During playback, press the INFO button on the remote control.
2. Press the ▲▼ buttons to select Angle.
BD
Title
: 001/006
3. Press the ◄► buttons or you can use the number buttons
on the remote control to select the desired angle.
Chapter
: 003/016
Info
Playing Time : 00:11:14
Audio
: ENG Multi CH
Subtitle
: ENG
Angle
: 01/01
§ CHANGE
M
¨ MOVE
If the disc has only one angle, this feature won’t work.
Currently, very few discs have this feature.
 Depending on the disc, these functions may not work.
USING THE BOOKMARK FUNCTION
The features lets you bookmarks sections of a DVD so you can quickly find them at a later time.
hZCV
Using the MARKER button
1. During playback, press the MARKER button on the remote
control.
• The Bookmark screen appears.
2. Press the ENTER button when the desired scene appears.
• The selected scene will be stored.
Marker
BD
►
T:1
00:12:17
00:12:21 / 01:53:26
Add
Add
a DELETE
3. Press the ◄► buttons to move to the next position.
M
Add
Add
s Play
Add
Add
e EXIT
Marker
BD
4. Press the ENTER button again when the desired scene
appears.
• The scene will be stored at the selected position and the
bookmark time information will be shown.
• Repeat above to bookmark other positions.
• You can bookmark up to 8 scenes.
Add
§ MOVE
►
T:1
00:12:17
a DELETE
00:12:33 / 01:53:26
T:1
00:12:27
Add
Add
§ MOVE
Add
s Play
Add
Add
Add
e EXIT
When the EJECT button is pressed, bookmarks will
disappear.
54
HT-BD2_NOGB.indd
54
2007-12-6
11:49:43
1. During playback, press the MARKER button on the
remote control.
GB
Playing back a bookmark
Marker
BD
►
T:1
00:12:17
00:12:21 / 01:53:26
T:1
00:12:27
Add
Add
§ MOVE
Add
Add
s Play
Add
Add
e EXIT
2. Press the ◄► buttons to select a bookmarked scene.
3. Press the ENTER or PLAY/PAUSE(
) button to start playing from the selected scene.
Clearing a bookmark
1. During playback, press the MARKER button on the
remote control.
Marker
BD
►
T:1
00:12:17
00:13:11 / 01:53:26
T:1
00:12:27
T:1
00:12:53
a DELETE
2. Press the ◄► buttons to select a bookmarked scene.
T:1
00:12:57
T:1
00:12:59
s Play
Add
Add
e EXIT
Marker
BD
►
T:1
00:12:17
00:13:27 / 01:53:26
T:1
00:12:27
T:1
00:12:53
a DELETE
3. Press the RED(A) or CANCEL button to delete the
selected bookmark.
T:1
00:12:55
§ MOVE
● WATCHING A MOVIE
a DELETE
T:1
00:12:55
§ MOVE
T:1
00:12:57
T:1
00:12:59
s Play
Add
Add
e EXIT
Marker
BD
►
T:1
00:12:17
a DELETE
00:13:38 / 01:53:26
T:1
00:12:27
T:1
00:12:53
T:1
00:12:55
§ MOVE
T:1
00:12:57
s Play
Add
Add
Add
e EXIT
55
HT-BD2_NOGB.indd
55
2007-12-6
11:49:59
listening to music
B
PLAYING AN AUDIO CD(CD-DA)
1. Insert an Audio CD(CD-DA) into the Disc Insert Hole.
• For an audio CD, the first track will be played
automatically.
TRACK 001
CD
2. To move to the Music List, press the STOP or RETURN
button.
• The Music List screen is displayed
01/12
►
00:01:29 / 00:04:06
a Play Mode
Video
3. Press the ▲▼ buttons to select the track you want to play,
and then press the ENTER button.
Music
CD
Photo
Setup
TRACK 005
00:03:20
TRACK 006
00:03:20
TRACK 007
00:03:32
TRACK 008
00:04:36
TRACK 009
00:04:17
TRACK 010
00:04:11
TRACK 011
00:04:07
TRACK 012
00:04:46
TRACK 013
00:04:21
b Playlist
A
PLAYING AN MP3
1. Insert an MP3 disc into the Disc Insert Hole.
• The Menu screen is displayed.
Video
2. Press the ▲▼ buttons to select Music, then press the
ENTER button.
• The Music List is displayed.
Music
CD
Photo
Setup
3. Press the ▲▼ buttons to select the MP3 file you want to
play, and then press the ENTER button.
Root
21 Jun 2007 00:03:06
Song01.mp3
Song02.mp3
21 Jun 2007 00:03:32
Song03.mp3
21 Jun 2007 00:03:38
Song04.mp3
21 Jun 2007 00:03:41
Song05.mp3
21 Jun 2007 00:03:43
Song06.mp3
21 Jun 2007 00:04:05
Song07.mp3
21 Jun 2007 00:03:27
Song08.mp3
21 Jun 2007 00:03:51
b Playlist
Audio CD(CD-DA)
TRACK 001
CD
►
MP3
Song01.mp3
01/12
00:01:29 / 00:04:06
a Play Mode
CD
►
01/04
00:00:05 / 00:05:02
a Play Mode
AUDIO CD(CD-DA)/MP3 SCREEN ELEMENTS
Displays the media type.
• Current track (song)
• Audio CD(CD-DA) : Displays the
number of the track currently being
played.
• MP3 : Displays the name of the track
currently being played.
Play Status Bar.
Displays the current play index, total track number.
Current /Total Play Time.
Displays available COLOR buttons.
(see next page for Color button usage).
56
HT-BD2_NOGB.indd
56
2007-12-6
11:50:15
1
2
1
2
3
3
4
5
7
8
4
6
7
8
9
9
SKIP( ) button: During playback, plays the next track.
Moves to the next page in the Music List or the Playlist.
PLAY/PAUSE ( ) button: Plays the currently selected track.
If pressed during playback, the current track is paused.
Press the SEARCH (
) buttons :
Fast Play (Audio CD(CD-DA) only).
▲▼ buttons : Selects a track(song) or a folder in Music
List or Playlist.
SKIP ( ) button : Returns to the beginning of the current
track when pressed during playback. If pressed again, your Bluray Home Cinema moves to and plays the previous track.
If you press this button within three seconds after playback
starts, the previous track will be played.
If you press this button after three seconds, the current
track will be replayed from the beginning.
Moves by the page in the Music List or the Playlist.
● LISTENING TO MUSIC
5
6
GB
BUTTONS ON THE REMOTE CONTROL USED FOR AUDIO CD
(CD-DA)/ MP3 DISC PLAYBACK
STOP ( ) button: Stops a track(song).
ENTER button : Plays the selected track (song).
◄► buttons
► : Moves to the applicable folder or plays the applicable
track, according to the current position.
◄ : Moves to the parent folder.
COLOR buttons: RED(A), GREEN(B), YELLOW(C)
RED(A) button : Selects the Play Mode(Repeat) during playback.
GREEN(B) button : Go to Playlist from Music List/Go to
Music list from Playlist.
YELLOW(C) button : Playlist play.
REPEAT AUDIO CD(CD-DA) & MP3
During playback, press the REPEAT or RED(A) button repeatedly to select the repeat mode you want.
When playing an Audio CD(CD-DA) : Normal When playing an MP3 disc : Normal • Normal (Audio CD(CD-DA)/MP3): Tracks on a disc are played in the order in which they were
recorded on the disc.
Repeat Track (Audio CD(CD-DA)/MP3)
•
Repeat Folder (MP3)
•
•
Random (Audio CD(CD-DA)/MP3)
- When playing an Audio CD(CD-DA): The random option plays a disc’s tracks in random order.
- When playing an MP3 disc : The random option plays a folder’s file in random order.
•
Repeat All (Audio CD(CD-DA)): All tracks are repeated.
- To return to normal playback Press the REPEAT or RED(A) button repeatedly to return to normal playback.
57
HT-BD2_NOGB.indd
57
2007-12-6
11:50:23
listening to music
Playlist
You can create a playlist with up to 99 tracks.
To setup, follow steps 1 to 2 in page 56.
Video
1. Press the GREEN(B) button.
Music
CD
Photo
Setup
TRACK 006
00:03:20
TRACK 007
00:03:32
TRACK 008
00:04:36
TRACK 009
00:04:17
TRACK 010
00:04:11
TRACK 011
00:04:07
TRACK 012
00:04:46
TRACK 013
00:04:21
TRACK 014
00:03:43
b Playlist
2. Press the ▲▼ buttons to select a track, then press the
ENTER button to add it to the Playlist.
• Repeat this procedure to add additional tracks.
Original
Playlist
Video
Music
TRACK 001
Photo
TRACK 002
CD
TRACK 003
Setup
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
b Music List
3. If there is an undesired track in the playlist, press the
►▲▼ button to select that track, and then press the
ENTER button.
• The selected track will be deleted.
Playlist Play
s Add
Original
Video
© Play
Playlist
TRACK 005
01.TRACK 002
Music
TRACK 006
Photo
TRACK 007
03.TRACK 004
TRACK 008
04.TRACK 006
CD
Setup
02.TRACK 003
TRACK 009
TRACK 010
TRACK 011
TRACK 012
TRACK 013
b Music List
4. Press the YELLOW(C) button to play the selected tracks.
When the track is finished, the next track will automatically
play.
Playlist Play
s Add
Original
Video
© Play
Playlist
TRACK 005
Music
TRACK 006
01.TRACK 002
Photo
TRACK 007
02.TRACK 003
TRACK 008
03.TRACK 004
TRACK 009
04.TRACK 006
CD
Setup
TRACK 010
TRACK 011
TRACK 012
TRACK 013
b Music List
Playlist Play
s Delete
© Play
5. To go back to the Music List, press the STOP or RETURN
button.
58
HT-BD2_NOGB.indd
58
2007-12-6
11:50:26
GB
Viewing a Picture
VIEWING A PICTURE
1. Insert a JPEG disc into the Disc Insert Hole.
Music
• The Menu screen is displayed.
176.JPG
Setup
BEACH.JPG
17 Feb 2004
KE.JPG
10 Apr 2003 194 KB
KE2.JPG
10 Apr 2003 191 KB
MBHONG.JPG
20 Apr 2002
30 KB
NEW_BEE.JPT
08 Jul 2004
76 KB
_____1_.JPG
18 Feb 2004
17 KB
• The Photo List is displayed.
3. Press the ▲▼ buttons to select a picture.
• To see the next page, press the SKIP ( ) button.
• To see the previous page, press the SKIP( ) button.
M
08 Feb 2003 127 KB
27 KB
d Slide Show
Photo files larger than 6Mb or with more than 7 million pixels may not be played.
● VIEWING A PICTURE
2. Press the ▲▼ buttons to select Photo, then press the
ENTER button.
Root
Photo
CD
SLIDE SHOW/SPEED
To setup, follow steps 1 and 2 above.
3. Press the BLUE(D) button.
• The slide show starts.
CD
►
_____1_.JPG
07/07
4. When the SlideShow starts, press the BLUE(D) button to
adjust the play speed.
• Each time you press the button, the play speed will
increase accordingly.
➞
d Speed
➞
¦ Stop
- To stop the Slide Show Press the STOP or RETURN button.
M
JPEG's smaller than 1920 x 1080 will be displayed
at normal resolution. They will not fully fill the
screen.
ROTATE
To setup, follow steps 1 and 3 above.
CD
 KE.JPG
04/07
4. Press the ENTER button.
5. Use the RED(A) and GREEN(B) buttons to rotate the image in a
desired direction.
ar90
M
b u90
Zoom
d Speed
© Slide Show
Photo files larger than 6Mb or with more than 7
million pixels cannot be rotated.
59
HT-BD2_NOGB.indd
59
2007-12-6
11:50:35
ZOOM
To setup, follow steps 1 to 3 in "Viewing a Picture" on page 59.
4. Press the ENTER button.
CD
 KE.JPG
04/07
5. Press the YELLOW(C) button.
ar90
b u90
Zoom
d Speed
© Slide Show
6. Use the RED(A) and GREEN(B) buttons to zoom in/out the
image.
x2
- To move the area Press the ▲▼◄ ► buttons to the area you want to enlarge.
a Zoom In
b Zoom Out
Zoom Off
m MOVE
- To stop the Zoom Press the YELLOW(C) button.
GO TO PHOTO LIST
To setup, follow steps 1 to 3 in "Viewing a Picture" on page 59.
4. Press the ENTER button.
CD
 BEACH.JPG
03/07
5. To go Photo List, press the RETURN or STOP button.
ar90
b u90
Zoom
d Speed
© Slide Show
..
Music
Photo
CD
Setup
176.JPG
08 Feb 2003 127 KB
BEACH.JPG
17 Feb 2004
27 KB
KE.JPG
10 Apr 2003 194 KB
KE2.JPG
10 Apr 2003 191 KB
MBHONG.JPG
20 Apr 2002
30 KB
NEW_BEE.JPT
08 Jul 2004
76 KB
_____1_.JPG
18 Feb 2004
17 KB
d Slide Show
60
HT-BD2_NOGB.indd
60
2007-12-6
11:50:41
GB
sound mode
SFE(SOUND FIELD EFFECT) MODE
You can set the SFE best suited for the type of music you are listening to.
● SOUND MODE
Press the SFE MODE button.
• SFE MODE appears on the display panel.
• Each time the button is pressed, the selection changes as
follows
HALL1 ➞ HALL2 ➞ JAZZ ➞ CHURCH ➞ ROCK ➞ SFE OFF.
•
•
•
•
•
HALL : Provides a clear vocal as if listening in a concert hall.
JAZZ : Recommended setting for Jazz.
ROCK : Recommended setting for Rock.
CHURCH : Gives the feel of being in a grand church.
SFE OFF : Select this for normal listening.
M
SFE mode is not available with 7.1CH encoded signals or HD audio sound.
NEO:6 MODE
Enables you to play back 2 channel or DTS 5.1 channel audio signals over 7.1speakers.
Press NEO:6 MODE button.
• NEO:6 MODE appears on the display panel.
• Each time the button is pressed, the selection changes as follows.
CINEMA ➞ MUSIC ➞ NEO:6 OFF.
This mode decodes 2 channel signals to a high precision digital
matrix decoder.
• CINEMA : CINEMA mode is optimized for movie playback.
• MUSIC : MUSIC mode is optimized for music playback.
• NEO:6 OFF : Select this for normal listening.
M
NEO:6 mode is not available with 7.1CH encoded discs or HD (High Definition) audio.
 PCM signal is available when it is at 32KHZ, 44.1KHZ, 48KHZ, 88.2KHZ or 96KHZ.
 This mode is available only with 2 channel or DTS 5.1 channel audio sources.
61
HT-BD2_NOGB.indd
61
2007-12-6
11:50:47
sound mode
DOLBY PRO LOGIC IIx MODE
You can select the desired Dolby Pro Logic IIx audio mode.
Press the
PL IIx MODE button.
• Each time the button is pressed, the mode changes as
follows.
MUSIC ➞ MOVIE ➞ PRO LOGIC ➞ MATRIX ➞ VIRTUAL ➞
GAME ➞ DPL IIx OFF .
• MUSIC : When listening to music, you can experience sound effects as if you are listening to the
actual performance.
• MOVIE : Adds realism to the movie soundtrack.
• PRO LOGIC : You will experience a realistic multi-channel effect, as if using six speakers, while using
just the front left and right speakers.
• MATRIX : You will hear 7.1 channel surround sound.
• VIRTUAL : Select to enjoy a 5.1-channel surround sound that gives the feeling of being in a baseball
park or concert hall.
• GAME : Enhances the excitement of the game's sound.
• DPL IIx OFF : Select this to listen to sound from the front left and right speakers and the subwoofer only.
M
When selecting Pro Logic IIx mode, connect your external device to the AUDIO INPUT
jacks (L and R) on the player. If you connect to only one of the inputs (L or R), you cannot
listen to surround sound.
 This mode is available only with 2 channel or DTS 5.1 channel audio sources.
DOLBY PRO LOGIC IIx EFFECT
This function works only in Dolby Pro Logic MUSIC mode.
1. Press the
PL IIx MODE button to select MUSIC mode.
PL IIx EFFECT button.
2. Press the
• Each time the button is pressed, the mode changes as
follows.
3. Press the ◄ ► buttons to select the desired effect setting.
• PANORAMA : You can select either 0 or 1.
• C- WIDTH : You can select between 0 and 7.
• DIMENS : You can select between 0 and 6.
62
HT-BD2_NOGB.indd
62
2007-12-6
11:50:49
GB
radio
LISTENING TO RADIO
Remote Control
1. Press the TUNER button to select the FM band.
● RADIO
2. Tune in to the desired station.
) button is
• Automatic Tuning 1 : When the SKIP (
pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the
TUNING/CH (
) button to automatically search for
active broadcasting stations.
• Manual Tuning : Briefly press the TUNING/CH (
) button to increase or decrease the
frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP ( ) button to select PRESET and then
) button to select the preset station.
press the SKIP (
• Automatic Tuning 2 : Press the STOP ( ) button to select MANUAL and then
press and hold the SKIP (
) button to automatically search the band.
• Manual Tuning : Press the STOP ( ) button to select MANUAL and then
briefly press the SKIP (
) button to tune in to a lower or higher frequency.
Mono/Stereo
Press the MO/ST button to listen in Mono/Stereo.
• Each time the button is pressed, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory
1. Press the TUNER button to select the FM band.
) button to select <89.10>.
2. Press the TUNING/CH (
3. Press the TUNER MEMORY button.
• PRGM flashes in the display.
) button to select preset number.
4. Press the SKIP (
• You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before PRGM disappears from the display.
• PRGM disappears from the display and the station is stored in memory.
6. To preset another station, repeat steps 2 to 5.
• To tune in to a preset station, press the SKIP (
) button on the remote control to select a channel.
63
HT-BD2_NOGB.indd
63
2007-12-6
11:50:50
convenient function
SLEEP TIMER FUNCTION
You can set the time that the Blu-ray Home Cinema will shut itself off.
Press the SLEEP button.
• Each time the button is pressed, the preset time changes as follows
:
10 ➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF.
To confirm the sleep timer setting, press the SLEEP button.
• The remaining time before the Blu-ray Home Cinema will shut itself
off is displayed.
• Pressing the button again changes the sleep time from what you
have set earlier.
To cancel the sleep timer, press the SLEEP button until OFF appears on the display.
ADJUSTING DISPLAY BRIGHTNESS
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the DIMMER button.
• Each time the button is pressed, the brightness of front display will
be adjusted.
MUTE FUNCTION
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
• MUTE appears in the display.
• To restore the sound, press the MUTE button again.
64
HT-BD2_NOGB.indd
64
2007-12-6
11:50:54
GB
troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest
authorized dealer or Samsung Electronics Service Center.
SYMPTOM
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the BD/DVD.
BD/DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this Blu-ray Home Cinema.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only from a few
speakers and not all 8.
• When listening to a CD or radio, sound is output from the front speakers
(L/R) only. To enjoy sound over 7 or 8 speakers select the D.PL IIX, Neo:6
or SFE MODE modes.
• If you set SBL and SBR to NONE in the speaker mode in the audio setup of
the setup screen, no sound is heard from the SBL and SBR speakers.
Set SBL and SBR to Small.
Dolby Digital 5.1 CH Surround Sound is
not produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Sound is produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in the
information display?
The remote control does not work.
• Is the remote control being operated within its operation range of angle and distance?
• Are the batteries drained?
• Have you selected the mode(TV/BD) functions of the remote control (TV or BD) correctly?
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles do not work.
• Audio language and subtitles will not work if the disc does not contain them.
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or
4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only.
Refer to the BD disc jacket and then select the appropriate function.
● TROUBLESHOOTING
I cannot eject the disc.
65
HT-BD2_NOGB.indd
65
2007-12-6
11:50:56
troubleshooting
SYMPTOM
Check/Remedy
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The Blu-ray Home Cinema is not working
normally.
• Turn off the power and hold the STOP ( ) button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
The password for rating level has been
forgotten.
• While (NO DISC) message appears on the display of main unit, hold the
main unit's STOP ( ) button for longer than 5 seconds. INITIAL
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
While listening to TV audio through the
Blu-ray Home Cinema system, no sound
is heard.
• If the EJECT button is pressed while listening to TV audio using the
D.IN or AUX functions, the BD/DVD functions are turned on and this mutes
the TV audio.
The
• The features or action cannot be completed at this time because:
1. The BD/DVD’s software restricts it.
2. The BD/DVD’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
icon appears on screen.
If the HDMI output is set to a resolution your
TV cannot support (for example, 1080p), you
may not see a picture on your TV.
• Press the STOP ( ) button (in front panel) for more than 5 seconds with
no disc inside. All settings will revert to the factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the Blu-ray
Home Cinema.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input
resolution.
Abnormal HDMI output screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
66
HT-BD2_NOGB.indd
66
2007-12-6
11:50:57
GB
appendix
CAUTIONS ON HANDLING AND STORING DISCS
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
● APPENDIX
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Do not keep in direct sunlight
M
Keep in a cool
ventilated area
Keep in a clean Protection jacket.
Store vertically.
Do not allow the discs to become contaminated with dirt.
 Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with
a soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc
M
Condensation may form if warm air comes into contact with cold parts inside the player.
When condensation forms inside the player, the player may not operate correctly. If this
occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.
67
HT-BD2_NOGB.indd
67
2007-12-6
11:50:58
appendix
SPECIFICATIONS
General
Power Consumption
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
BD (Blu-ray Disc)
DVD (Digital Versatile Disc)
Disc
CD : 12 cm (COMPACT DISC)
CD : 8 cm (COMPACT DISC)
Composite Video
Video Output
Component Video
Video/Audio
Amplifier
HDMI
Front speaker output
Center speaker output
Surround speaker output
Subwoofer speaker output
Surround Back speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
110 W
6.1 kg
440(W) x 396(D) x 87(H) mm
+5°C~+35°C
10 % to 75 %
Reading Speed : 4.917m/sec
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Blu-ray Disc : 576i/480i
DVD : 576i/480i
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Blu-ray Disc : 1080i, 720p, 576p/480p, 576i/480i
DVD : 576p/480p, 576i/480i
1080p, 1080i, 720p, 576p/480p
PCM multichannel audio, Bitstream audio, PCM audio
135W x 2(3Ω)
135W(3Ω)
135W x 2(3Ω)
155W(8Ω)
135W x 2(3Ω)
20Hz~20KHz
70dB
60dB
(AUX)400mV
7.1ch speaker system
Subwoofer
Front/Surround, Center, Surround Back
8Ω
3Ω
140Hz~50KHz
35Hz~160Hz
88dB/W/M
90dB/W/M
135W
155W
270W
310W
Front/Surround : 125x 1310 x 81mm (Stand Base : Ø340mm)
Center : 550 x 137 x 85mm
Surround Back : 100x 270 x 97mm
Subwoofer : 311 x 378 x 443mm
Front/Surround : 6.3 kg, Center : 2.2 kg
Surround Back : 1.3 kg, Subwoofer : 14.4 kg
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
68
HT-BD2_NOGB.indd
68
2007-12-12
18:02:59
• Because AACS (Advanced Access Content
System) is approved as content protection
system for BD format, similar to use of CSS
(Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product. Furthermore,
BDROM Mark and BD+ are additionally used as
content protection system for BD format, which
imposes certain restrictions including playback
restrictions for BD-ROM Mark and/or BD+
protected contents. To obtain additional
information on AACS, BD-ROM Mark, BD+, or
this product, please contact SAMSUNG
customer care center.
• Many BD/DVD discs are encoded with copy
protection. Because of this, you should only
connect your Blu-ray Home Cinema directly to
your TV, not to a VCR. Connecting to a VCR
results in a distorted picture from copy-protected
BD/DVD discs.
• This product incorporates copyright protection
technology that is protected by methods claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation and is
intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly
is prohibited.
• Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BDs, DVDs, CDs and
other materials may subject you to civil and/or
criminal liability.
• PROGRESSIVE SCAN OUTPUTS (525p/625p)
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE `STANDARD
DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
NOT ALL discs are compatible
• Subject to the restrictions described below and those
noted throughout this Manual, including the Disc Type
and Characteristics section of this Manual, disc types
that can be played are: pre-recorded commercial
BDROM, DVD-Video, and Audio CD discs; DVD-RW /
DVDR discs; and CD-RW/CD-R discs.
• Discs other than the above cannot and/or is not intended
to be played by this player. And some of the above discs
may not play due to one or more reasons provided
below.
• HD DVD discs cannot be played in this player.
• Samsung cannot assure that this player will play every
disc bearing the BD-ROM, DVD-Video, DVD-RW / DVDR
and CD-RW / CD-R logos, and this player may not
respond to all operating commands or operate all
features of every disc. These and other disc compatibility
and player operation issues with new and existing format
discs are possible because:
- BD format is a new and evolving format and this player
may not operate all features of BD discs because some
features may be optional, additional features may have
been added to the BD format after the production of
this player, and certain available features may be
subject to delayed availability;
- not all new and existing disc format versions are
supported by this player;
- new and existing disc formats may be revised,
changed, updated, improved and/or supplemented;
- some discs are produced in a manner that allows
specifi c or limited operation and feature during playback;
- some features may be optional, additional features may
have been added after the production of this player or
certain available features may be subject to delayed
availability;
- some discs bearing the BD-ROM, DVD-Video, DVD
RW/ DVD-R and CD-RW/ CD-R logos may still be
nonstandardized discs;
- some discs may not be played depending on their
physical state or recording conditions;
- problems and error can occur during the creation of
BD, DVD and CD software and/or the manufacture of
discs;
- this player operates differently than a standard DVD
player or other AV equipment; and/or
- for reasons noted throughout this Manual and for other
reason(s) discovered and posted by SAMSUNG
customer care center.
• If you encounter disc compatibility or player operation
problems, please contact SAMSUNG customer care
center. You may also contact SAMSUNG customer care
center for possible updates on this player.
• For additional information on playback restrictions and
disc compatibility, refer to the Precautions, Before
Reading the User’s Manual, Disc Types and
Characteristics, and Before Playing sections of this
Manual.
● APPENDIX
Compliance and Compatibility Notice
GB
COPY PROTECTION
69
HT-BD2_NOGB.indd
69
2007-12-6
11:51:00
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care center.
North America
Latin America
Europe
CIS
Asia Pacific
Middle East &
Africa
HT-BD2_NOGB.indd
70
2007-12-6
11:51:01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement