USER`S MANUAL Xemio-653 Media Player

USER`S MANUAL Xemio-653 Media Player
USER’S MANUAL
Xemio-653
Media Player
For information and support, www.lenco.com
Warnings
Don’ts
•
Do not place naked flames, such as lighted candles on or near the product.
•
Do not place objects filled with liquids, such as vases on or near the product.
•
Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or
vibration.
•
Do not use this product with wet hands.
•
Do not clean this product with water or other liquids.
•
Do not block or cover the slots and holes in the product.
•
Do not push foreign objects into the slots or holes in the product.
•
Do not attempt to open this product yourself. There are no user serviceable parts inside.
•
Do not allow children access to plastic bags.
SAFETY WARNINGS
•
Before using this product, read and follow all warnings and instructions.
•
This product is not intended for use by young children. Young children should be properly supervised.
•
This product is intended for household use only and not for commercial or industrial use.
•
Do not expose to dripping or splashing.
•
No naked flame sources, such as lighted candles, should be placed on the product.
•
Ventilation should not be impeded by covering ventilation openings with items such as newspapers,
table cloths, curtains and the like.
•
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an
unstable position or by failure to follow any other warning or precaution contained within this user
manual will not be covered by warranty.
Lenco suggests retaining the packaging in case for future transport of the product.
If at any time in the future you should need to dispose of this product please note that: All batteries and
accumulators need to be removed from this product (Removal of Waste Batteries and Accumulators).
WARNING: Prolonged exposure to loud sounds from personal music players may lead to temporary
or permanent hearing loss.
WARNING: When participating in the traffic listening to a personal music player can make
the listener less aware of potential dangers such as approaching cars.
1.
Get to know the controls on Player
Item
Description
Item
Description
1
(Previous / Fast-Rewind / VOL-)
7
Microphone (Mono)
2
(Next / Fast-Forward / VOL+)
8
Earphone Output Jack
9
USB Mini Connector
10
Micro SD Memory Card Slot
11
TFT LCD Display
3
4
M (Menu / Enter / Select)
(Play / Pause / Standby ON - OFF)
5
VOL (Volume Control)
6
Main Power Switch (ON - OFF)
About Player Battery
Player has an internal, non–user-replaceable battery. For best results, the first time you use
player, let it charge for about 2 hours or until the battery status icon in the “Connect” screen shows
that the battery is in full.
Battery is in full
Note: Player continues to use battery power after it’s been turned off, if unit isn’t used for a while,
the battery might need to be charged.
a.
Charging the Battery:
You can charge the player battery in two ways:
Connect player to your computer. Or,
Use the USB power charger. (available separately)
b.
Connection and Charging:
Once you have connected player with computer / power charger, then you will see the
“Connect” screen appear on screen,
The level bars are running in battery status icon at the “Connect” screen. The battery is in
charging.
“Connect” Screen
In Charging
Important: The battery does not charge when your computer is in sleep. The USB port on most
keyboards does not provide enough power to charge the player. Connect player to a USB 2.0 port
on your computer only to prevent charge problem.
2.
Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media files and recorded
voice memos when necessary, and to charge the battery. Disconnect the player when you’re done.
a.
To Connecting Player
To connect player to your computer, plug the connector of USB Cable into a USB port on your
computer, and connect the other end to player, then the “Connect” screen appear for view.
Now the player is ready for media files transfer with your computer and the battery is
charging.
You can transfer the media files by using the computer mouse use drag and place, or copy and
paste, in between the player and your computer. Disconnect it when you’re done.
b.
To Disconnecting Player
It’s important not to disconnect player while it’s syncing or transferring files. Eject the player
before disconnect it.
To eject player, press and hold M button for about 2 seconds, the “Connect” screen will switch
to “Main Menu” screen. And now is safe to disconnect the player with your computer. Unplug
the USB cable from the player. Or,
If you’re using a Windows PC, you can also eject player in My Computer or by clicking the
“Safely Remove Hardware” icon in the Windows system tray, select the correspondence name
of USB Device and choose “Stop” > choose “Confirm” > choose “Confirm” follow by the pop
up windows you’re your computer.
If you’re using a Mac, you can also eject player by dragging the player icon on the desktop to
the Trash.
Disconnect the USB cable from the player and computer, simply remove it.
If you accidentally disconnect player without ejecting it, reconnect it to your computer and
sync again. However, some media file may loss.
3.
Getting Start the Player
Turn ON / OFF the player and use of Main Menu.
Slide the power switch to “ON” position, then you will see any one of the following shown
Main Menu screen, Music / Movie / Record / Voice / Photo / eBook / Game / Setup, will
appear on LCD after the Loading and Opening screen have displayed.
To standby OFF the player, press and hold the
button for 3 – 4 seconds.
To turn ON the player again, press and hold the
button for 3 – 4 seconds again.
“Main Menu” screens
(If Music chooses)
(If Movie chooses) (If Record chooses) (If Play chooses)
(If Picture chooses) (If Text chooses)
(If Game chooses)
(If Setting chooses)
4.
Use Setup Menu
You might need to set date & time or change some default setting as you desired in setup sub
menu before you start to use the player.
To go into setup menu, from main menu, choose “Setup” by use
/
button and then
press M button, a “Setting” menu appears to use.
You can go back to previous menu by press the
button during in setup menu. Or, press and
hold the M button to return to main menu.
Setup Menu
(Menu Page 1)
(Menu Page 2)
a.
To Setup “System time” (Date & Time):
Choose “System time” by using
/
setting screen appears to use.
Press “VOL” button, the year is highlighted then adjusting to current year by pressing the
button and then press M button, a date & time
/
button. And repeating the adjusting methods by “VOL” and
/
button again
for finished those items; Month, Date, Hour, Minute and seconds setting adjustment.
Finally, you need to press the M button to confirm the adjustment and back to Setup menu, if
not the date & time will not to memorize and you need to adjust them again.
Important: Don’t turn OFF the player by the Power Switch if you want to keep the date & time
running in background, standby OFF the player by press and hold the
button in this case. If not,
the set date & time will be losses. Adjust the clock again if you want it to use.
b.
To change “LCD set”
You can set the backlight to illuminate the screen for a certain amount of time as you desired
or make the backlight to always ON when every time you turn ON the player.
To change LCD backlight, choose “LCD set” > choose “Dark mode”, a level bar with number
appear then chose “0 (always On) / 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 seconds” as you
desired by using M and
/
buttons. Choose “0” to prevent the LCD backlight from
turning to off. (choosing this option decrease battery performance)
c.
To Change “Language”
This player can use difference OSD languages.
To set the language, choose “Language”, and then choose which language as you desired by
using M and
/
buttons.
d.
To Set “Power Off”
The Power Off setting can extend the time between battery charges by turning OFF the player
when you are not using the controls or no operation. Also, Sleep function provided for more choice.
To set power off time, choose “Power off”, then choose “Off time”, a levels bar with number
/
buttons.
menu appear, then choose “0 - 200 seconds” as you want by using M and
To set sleep time, choose “Power off”, then choose “Sleep time”, a levels bar with number
menu appear, choose “0 / 10 / 20 /30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 / 120 minutes” as
you want by using M and
/
buttons.
e.
To Change “Online mode” (Applicable depend on Model)
You might need to change the online mode when connecting with computer system. In the
sense that some operating systems (under Windows 2K SP4) cannot support two driver letters in
one USB disk. The multiply driver is selected by device default; however, you can change it when
necessary.
To change type of disk, choose “Online mode” choose “Multiply driver / Normal only (single
ordinary disk) / Card only” by using M and
/
buttons.
f.
To View “Memory info”
You can view about the memory status of player, such as the numbers of remaining memory
space available and the percentage of memory have used.
To view the status, choose “Memory info” by using M and
/
buttons. An
information screen, remaining memory space available and percentage of memory used,
appear for view.
To return to setup menu or main menu press
button or press and hold M button
g.
To “Format Device”
You might need to format device the device memory. In some circumstances, the device
memory may be corrupted, or you may need to format the memory card if it newly use with this
device. However, you can format the device or memory card by the following method but all data
will be losses.
Choose “Format Device” then choose “Format Disk / Format Card” by using M and
/
buttons, and then choose OK to process or choose Cancel to exit and back to setup menu.
h.
To View “Firmware Version”
You might need to view the details about firmware information inside the Player.
Choose “Firmware version” by using M and
appear for view.
To return to setup menu or main menu, press
/
buttons, an information screen
button or press and hold M button.
i.
To “Firmware Upgrade” (System Utility Tools required)
You might need to upgrade the firmware for advanced the player performance or firmware
getting trouble or damaged in some circumstance, such as electrostatic voltage discharge issue
happens. Please follow the instruction posted by the dealer (if any) or follow the instruction from
System Utility Tools if provided. It is not recommended to do if the player is proper working.
j.
To “Exit”
Select Exit to back to main menu. Or, press and hold the M button to go back main menu.
5.
Use Music Menu
You can use music player to playback with supported music file format of audio coding; WAV
and MP3 are supported by the player. To open the music player in Main Menu:
From main menu, choose “Music” by using
/
and M button, a “Music Now
Playing” screen appears to use.
“Music Now Playing” Screen
a.
To Play Music
In Music Now Playing screen, press
button to start the play.
Press
button to pause the playing music. Press it again to play.
b.
Play Previous or Next Music
Press
button to play next music.
Press
button to play previous music.
c.
Use Fast-Forward or Fast-Backward
Press and hold
button to use fast-forward
Press and hold
button to use fast-backward.
d.
Adjust volume level
In music playing , press “VOL” button, a change volume control screen appears, then press
/
buttons to adjust volume levels to down / up.
Wait for 6 – 8 seconds or press
button to return to music now playing screen.
For hearing protection; a beep warning will be heard from earphone, or display warning pop-up
on TFT screen, when every time you increase the volume level and reach to the default setting level
which may exceed 85dB. Press M button to accept the warning and enter into the volume control
for increase the level and until to maximum level.
e.
Use Lyric Display
This player supports “*.LRC” lyric files and lyrics can synchronous displayed while playing
music if you music has lyric included. How to know whether the lyrics exist? If the current song has
matching lyric files, the color dot beside the Lyric Message icon will be turned to green color
from red
in Music Now Playing screen.
Playing the music with lyrics, and then press and hold M button to enter the lyric display mode
and the lyrics is displaying and moving up accordingly with the playing music.
Press M button to cancel the lyrics display and go back to Music Now Play screen if you want.
6.
Use Music Submenu in Music Stop Mode
You might need to selecting folders for music play and delete music files. To do this:
a.
Local Folder
In Music Now Playing screen, press
then press M button to call up the Music Submenu.
In Music Submenu screen, choose “Local folder” a list menu appear, and then select folder
and / or choose a music file by using
/
and M button.
It will go back to music now playing screen once a music file is selected. Then press
button to stop the playing music if player is in playing,
button to play.
b.
Delete file
In Music Submenu screen, choose “Delete file” a list menu appear, and then choose which
music file that you want to delete by using
/
and M buttons.
Once file is selected, press M button and choose Yes to confirm or No to cancel.
c.
Delete All
In Music Submenu screen, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press M button to confirm.
All music files will be deleted once YES is selected and confirmed, a “Deleting” screen appear
for a while and deleting process is in progress, then “Empty disk!” message will shown on
screen for few seconds.
d.
Exit
Select Exit to back to music now playing screen.
7.
Use Music Submenu in Music Playing Mode
You might need to do some changes for music playing, such as repeat, EQ settings for music
files… etc. To change setting:
a.
To Set Repeat
In music playing mode, press M button, a Music Submenu appear, then choose “Repeat”, then
choose “Normal / Repeat one / Folder / Repeat folder / Repeat all / Random / Intro” as you
desired by using
b.
/
and M buttons.
To Change Equalizer
In music playing mode, press M button, a Music Submenu appear, the choose “Equalizer”,
then choose “Natural / Rock / Pop / Classic / Soft / Jazz / DBB” as you desired.
c. To set Replay Mode
Set Repeat A-B:
In Music Submenu, press M button, a list menu appear, then choose “Replay mode” then
choose “Repeat”, a letter “A” is flashing in Music Now Playing screen, then press
button
to select the starting point of track “A”.
Then a letter “B” is flashing once “A” is selected, use
button again to select the ending
point of track “B” which you want by using
button. And now the A – B distance of track
is repeating.
However, the repeating time and the replay gap time is depend on the set values of Replay
Time and Replay Gap have mentioned in below items.
To create another A – B distance of track to repeat, press
new created A – B distance of track is repeating.
To cancel the repeat A – B function, press the M button. Or press
button again and then again. a
button to pause.
Set Replay Times:
In music playing mode, press M button, a Music Sub-menu appear, the choose “Replay times”,
then choose “1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10” as you desired by using
/
and M
buttons. The Player will replay those music file as your selected number of times accordingly.
Replay Gap:
In music playing mode, press M button, a Music Sub-menu appear, the choose “Replay Gap”,
then choose “1 / 2 / 3 / 4 / 5 / 6 / 7/ 8 /9 / 10 second(s)” as you desired by using
/
and
M buttons. The replay gap time in between music to music or in repeat A- B will replay and
stop according the selected number of time.
d.
Exit
Select Exit to back to music now playing screen.
8.
Use Movie Menu
a.
To Play Movie
From Main Menu, choose “Movie” by using
/
and M button, a “Movie Now
Playing” screen appears to use.
In Movie Now Playing” screen, press
key to start the play.
Press
button to pause and to back to Movie Now Playing screen. Press it again, the video
will play continue.
b.
To Play Previous or Next Video
Press
button to play next movie file.
Press
button to play previous movie file.
c.
Use Fast-Forward or Fast-Backward
Press and hold
button to play fast-forward.
Press and hold
button to play fast-backward.
d.
Adjust Volume Level
In movie playing mode, press VOL button, then, press
the volume levels.
To preset the volume level at movie stop mode, in Movie Now Playing screen press VOL
button, a volume control screen appears to use. Then press
/
key to preset your
/
key to decrease or increase
desired volume levels.
For hearing protection; a beep warning will be heard from earphone, or display warning pop-up
on TFT screen, when every time you increase the volume level and reach to the default setting level
which may exceed 85dB. Press M button to accept the warning and enter into the volume control
for increase the level and until to maximum level.
9.
Use Movie Submenu
You might need to selecting folders, delete movie files and set repeat for movie play. you can
make change during in the playing mode at Movie Now playing screen To do this:
In “Movie Now Playing” screen, press M button to enter to movie submenu.
a.
Local Folder
In movie submenu screen, choose “Local Folder”, a file list menu appear, and then select folder and /
or choose a desired movie file to play by using
and M button.
/
It will go back to music now playing screen once a music file is selected. Then press
button to play.
b.
Delete File
In movie submenu screen, choose “Delete file” a file list menu appear, and then choose which movie
file that you want to delete by using
/
buttons.
Once file is selected, press M button and choose “Yes” to confirm or “No” to cancel.
c.
Delete All
In movie submenu screen, choose “Delete all” then selects “Yes / No” by using
button.
One “YES” or “NO” appear then press M button to confirm.
All music files will be deleted once YES is selected and confirmed, a “Deleting” screen appear
for a while and deleting process is in progress, then “Empty disk!” message will shown on
screen for few seconds.
d.
Repeat
In movie submenu, choose “Repeat”, then choose “Normal / Repeat one / Folder / Repeat folder /
Repeat all / Random / Intro” as you desired by using
e.
/
/
and M buttons.
Exit
Select Exit to back to music now playing screen.
10. Convert Video files into AMV
This tool can be used to transform those video files into AMV files on the computer before you
upload them to you player.
To install this video convert tool to you computer, click “Utilities > video conversion
software” in provided CD. (or stored in your Player)
Select “Setup” to start the install program, the software will automatically install to you
computer.
After installation is done, open AMV Video converter on the PC
Noted: This program is used to convert video files into AMV format, currently only AMV format is
supported.
Run “AMV Video Converter”, click
to choose the folder where to save the AMV files,
and then click
to select the folder where the original files are. The original file will show
in the file window once selected.
Select with highlight the unprocessed AMV files in the file window, the
highlighted into
. And then click
icon will be
icon and a dialog box will be shown.
Choosing pixels of AMV to “160x120” and Frames per second to “middle”, then click OK to
confirm.
Click
to start converting.
After conversion, the AMV files will play automatically for preview.
And now the converted AMV file is ready to transfer, you can simply copy and place those
converted AMV files to the media player.
Note: Only pixels in 160x120 can be supported.
11. Use Record Menu
You can use the player as a Voice Recorder and recording voice memos using the built-in
microphone.
1.
To Start Recording Voice Memo
From main menu, choose “Record” by using
screen appear to use.
/
and M buttons, a “Now Recording”
“Now Recording” Screen
2.
To Start / Pause Recording
Press
button to start the recording and the recording time is running.
Press
button to pause the recording and recording time will stop and flashing. Press it
again the recording and time will run continue.
3.
To Save and Stop Recording File
Press and hold M button, the recorded file will save into memory.
12. Use Record Submenu (in Stop Mode)
You might need to change the folder locations which want to store the record file and / or
change record quality to better compression values.
In Now Recording screen at stop mode, press M button, a “Record Sub-menu appear to use.
a.
Local folder
In record submenu, choose “Local folder” and then choose the folder name which you want to
b.
save the record file by using
/
and M buttons.
Once folder name selected, press and hold the M button, then the folder location is changed
and go back to Now Recording screen.
And now you can see the folder name is changed at the Record Folder icon in “Now
Recording” screen.
Record Type
In record submenu, choose “Record type”, then choose “32K BPS / 64K BPS / 128K BPS /
256K BPS” values as you desired by using
/
and M buttons.
13. Use Voice Menu
For playback and manage the recorded voice memos file.
From main menu, choose “Voice” menu by using
Playing” screen appear to use.
/
and M buttons, a “Voice Now
“Voice Now Playing” Screen
a.
To Play and Pause Recorded Voice Memos
In Voice Now Playing screen, press
button to start to play the recorded file.
Press
button to pause the playing file.
b.
To Play Previous or Next File
Press
button to play next file.
Press
button to play previous file.
c.
To Fast-Forward or Fast-Backward
Press and hold
Press and hold
buttons to use fast-forward
button to use fast-backward.
d.
Adjust volume level
In music playing , press “VOL” button, a change volume control screen appears, then press
/
buttons to adjust volume levels to down / up.
Wait for 6 – 8 seconds or press
button to return to music now playing screen.
14. Use Voice Submenu in Stop Mode
You might need to change some setting as you desired for playing Voice file, you can make
change during in the playing mode at Voice Now Playing screen
a.
b.
Local Folder
In Voice Now Playing screen, press
button to pause / stop the playing file, if in playing
mode, then press M button to call up the voice submenu.
In Voice submenu screen, choose “Local folder” a list menu appear, and then select folder and
/ or choose a voice file by using
/
and M button.
It will go back to music now playing screen once a music file is selected. Then press
button to play.
Delete File
In voice submenu screen, choose “Delete file” a list menu appear, and then choose which voice
file that you want to delete by using
/
and M buttons.
Once file is selected, press M button and choose Yes to confirm or No to cancel.
c.
Delete All
In voice sub-menu screen, choose “Delete all” then selects “Yes / No” by using
button.
One “YES” or “NO” appear then press M button to confirm.
All music files will be deleted once YES is selected and confirmed, a “Deleting” screen appear
for a while and deleting process is in progress, then “Empty disk!” message will shown on
/
screen for few seconds.
d.
Exit
Select Exit to back to music now playing screen.
15. Use Voice Sub-menu in Playing Mode
You might need to do some changes for music playing, such as repeat, EQ settings for music
files… etc. To change setting:
a.
Repeat
In voice playing mode, press M button, a Music Sub-menu appear, then choose “Repeat”, then
choose “Normal / Repeat one / Folder / Repeat folder / Repeat all / Random / Intro” as you
desired by using
/
and M buttons.
b. Replay Mode
Set Repeat A-B:
In voice playing mode, press M button, a list menu appear, then choose “Replay mode” then
choose “Repeat”, a letter “A” is flashing in Voice Now Playing screen, then press
button
to select the starting point of track “A”.
Then a letter “B” is flashing once “A” is selected, use
button again to select the ending
point of track “B” which you want by using
button. And now the A – B distance of track
is repeating.
However, the repeating time and the replay gap time is depend on the set values of Replay
Time and Replay Gap have mentioned in below items.
To create another A – B distance of track to repeat, press
new created A – B distance of track is repeating.
To cancel the repeat A – B function, press the M button. Or press
button again and then again. a
button to pause.
Set Replay Times:
In voice playing mode, press M button, a Music Sub-menu appear, the choose “Replay times”,
then choose “1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10” as you desired by using
/
and M
buttons. The Player will replay those music file as your selected number of times accordingly.
Replay Gap:
In voice playing mode, press M button, a Music Sub-menu appear, the choose “Replay Gap”,
then choose “1 / 2 / 3 / 4 / 5 / 6 / 7/ 8 /9 / 10 second(s)” as you desired by using
/
and
M buttons. The replay gap time in between music to music or in repeat A- B will replay and
stop according the selected number of time.
c.
Exit
Select Exit to back to music now playing screen.
Note: Press and hold the M button will go back to Main Menu directly.
16. Use Photo Browse
You can use the player as picture / photo viewer:
To browse picture / photo file, from main menu choose “Photo” by using
button, a list menu appear to use.
Choose a file by using
/
button, and then press
button to play.
Press
button to stop and to go back to list menu for other files selection.
/
and M
To change previous / next photo, press
Press and hold M button to back to main menu.
/
button.
17. Use Photo Submenu in List Screen
You might need to change some setting for photo browse. To change setting:
a.
Local Folder
In list menu, press M button to call up the photo submenu.
In photo submenu, choose “Local folder” a list menu appear, and then choose folder and file to
browse by using
/
and M button.
Once photo file is selected, press
button to play.
b.
Playback Set
In photo submenu, choose “Playback set” and then choose “Manual play”. However, you need
to use
/
button to browse next / previous photo in photo playing mode when Manual
Play is selected.
Choose “Auto play”, a setting menu appear, then choose “2 / 3 / 4 / 5 / 5 / 6 / 7 / 8 / 9 / 10
second(s)” as you desired by using
/
and M buttons. The slide show function is
activated as your selected time gap to playing the photo files one by one automatically.
c.
Delete file
In photo submenu, choose “Delete file” a list menu appear, and then choose which photo file
that you want to delete by using
/
button.
Once file is selected, press M button and choose Yes to confirm or No to cancel.
d.
Delete All
In photo submenu, choose “Delete all” then selects “Yes / No” by using
One “YES” or “NO” appear then press M button to confirm.
All photo files will be deleted once YES is selected and confirmed, a “Deleting” screen appear
/
button.
for a while and deleting process is in progress, then “Empty disk!” message will shown on
screen for few seconds.
e.
Exit
Select Exit for back to photo browse list menu screen.
18. Use eBook Menu
You can use the player as a text reader with supported file format (.TXT).
a.
To open eBook
From main menu, choose “eBook” by using
/
and M buttons. A list menu appears to
use.
Choose a file which you want to read by using
play.
Press
button to change next page,
Press
button to go back to previous page,
Back to list menu screen, press
button.
Go back to main menu, press and hold M button
/
button, and then press
button to
19. Us eBook Submenu in list menu screen
You might need to change some setting for eBook reading. To change setting:
a.
Local Folder
In eBook list menu screen, press M button to call up the eBook Submenu.
In eBook Submenu, choose “Local folder” a list menu appear, and then choose folder and file
by using
/
button.
Once file is selected, press M button then
b.
Playback Set
In eBook Submenu, choose “Playback set” and then choose “Manual play”. You need to use
/
button to change next / previous page for reading when Manual Play is selected. Or,
Choose “Auto play”, a setting menu appears, then choose “1 / 2 / 3 / 4 / 5 / 5 / 6 / 7 / 8 / 9 / 10
button to read.
second(s)” as you desired by using
/
and M buttons. The Page Flip function is
activated as your selected time gap to playing.
c.
Delete file
In eBook Submenu, choose “Delete file” a list menu appear, and then choose which eBook file
that you want to delete by using
/
button.
Once file is selected, press M button and choose Yes to confirm or No to cancel.
d.
Delete All
In eBook Submenu, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press M button to confirm.
All eBook files will be deleted once YES is selected and confirmed, a “Deleing” screen appear
for a while and deleting process is in progress, then “Empty disk!” message will shown on
screen for few seconds.
e.
Exit
Select Exit for back to eBook list menu screen.
20. Us eBook Submenu in Playing Mode
You might need to add, select and delete some bookmark when you reading, to do this:
a.
Bookmark Select
In eBook playing mode, choose “Bookmark select” by using
/
and M button.
Choose a stored bookmark which you want to call and then press M button to play.
b.
Bookmark Delete
In eBook playing mode, choose “Bookmark delete” a list menu appears, and then choose
which saved bookmark you want to delete by using
/
button.
Once bookmark is selected, press M button to confirm. The bookmark is deleted and go back
to current reading play.
c.
Bookmark Add
In eBook playing mode, select the reading page you want to bookmark, press M button to call
up eBook submenu.
Choose “Bookmark Add” by using
/
button and then press M button, the pages is
saved into bookmark and go back to current reading page automatically.
d.
Exit
Select Exit for back to eBook list menu screen.
21. Use Memory Card Slot
This player allows you to play those support media files from your memory card (T-Flash). Also it
will increase the mobile hard disk memory capacity of the player if you use this option.
a.
To Play From Memory Card:
Turn Off the player. Now insert your Micro SD memory card into the memory card slot on side
of player.
Turn On the player and now the Micro SD memory card, T-Flash, is ready to use.
The “Card folder” item will be existed to use when you enter into those music, movie, photo, ,
Record, Voice and eBook submenu.
Go into the card folder and choose you desired folder(s) and file(s) to play.
To take out the Micro SD memory card, turn Off the player.
22. Use Game Menu
There have a game name “Snake”. Control the snake move up, down, left and right to eat the food
(dot) which will exist somewhere on TFT screen. The snake’s body will get longer at every eats for
food, but don’t let the snake hit the walls and hit the snake body.
To play game, from Main menu, choose “Game” menu, then choose a game to play.
Control KEY instruction; Press:
: left,
Press and hold M button to exit the game.
: right, VOL: Up, M : up,
: Pause.
23. Trouble Shooting
Unit cannot turn ON
* Check whether Power is slide to ON.
* Check battery is it charged with enough
energy.
No sound is heard from headphone.
* Check whether Volume is set “0” and connect
the headphone plugs firmly.
* Check whether the headphone plug is dirty.
* Corrupted MP3 may make a static noise and
the sound may cut off. Make sure that the music
files are not corrupted.
Characters in LCD are corrupted
* Check whether the right language has been
selected.
Download of music files fails.
* Check whether USB cable is damaged and is
connected properly.
* Check whether driver is installed correctly.
* Check whether the player’s memory is in full.
24. Specification
Dimension
80.5 mm (H) x 40.5 mm (W) x 9mm (D)
Weight
26g
LCD
1.8 Inches, Resolution (RGB)128 x 160
PC connection
USB 1.0 / 1.1 / 2.0
Earphone Impedance
32 Ohm
Internal Memory
See carton
Li-ion 3.7V, 170mAh
Battery
Audio
Max. Play Time: > 8 - 10 Hours (MP3 music with power
saving mode)
Max. Output Power of L = 275mV(rms) at 32 Ohm
Earphone
R = 275mV(rms) at 32 Ohm
Frequency Responses
20Hz to 20000Hz
SNR
> 60dB
Music Format
MP3 / WMA
32Kbps – 320kbps
Movie Format
AMV
Recorder Coding
WAV
Picture Format
JPEG / BMP / GIF
eBook Format
Operating Temperature
TXT
0 to 40℃
Operating System
Window 2000/XP/Vista, Mac 9.2 or above
32 / 64 / 128 / 256kbps
25. Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the
instruction, specifications and pictures in this documentation may differ slightly from your
particular situation. All items described in this guide for illustration purposes only and may not
apply to particular situation. No legal right or entitlements may be obtained from the description
made in this manual
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany
0900-1520530 (Local charges)
The Netherlands
0900-23553626
(Local charges + 1ct p/min)
Belgium
02-6200115
(Local charges)
France
03-81484280
(Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model and serial number of your product.
The serial number can be found on the back of the device. Please write down the serial number
below:
Model: XEMIO-653
Serial number:_________________________________
Lenco offers service and warranty in accordance to European law, which means that in case of
repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the
warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations
of the manufacturer will be voided.
This symbol indicates that the relevant electrical product or battery should not be
disposed of as general household waste in Europe. To ensure the correct waste
treatment of the product and battery, please dispose them in accordance to any
applicable local laws of requirement for disposal of electrical equipment or
batteries. In so doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of electrical
waste (Waste Electrical and Electronic Equipment Directive).
Products with the CE marking comply with the EMC Directive
(2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the
Commission of the European Community.
The declaration of conformity may be consulted at
http://www.lenco.eu/supportfiles/CE/15dhev58nt989866fghfe.pdf
®All rights reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement