PENTAX Optio LS465 Digital Camera Operating Manual

Digital Camera
Operating Manual
To ensure the best performance from your camera, please
read the Operating Manual before using the camera.
Downloaded From camera-usermanual.com
Thank you for purchasing this PENTAX Digital Camera.
Please read this manual before using the camera in order to get the most
out of all the features and functions. Keep this manual safe, as it can be
a valuable tool in helping you to understand all the camera’s capabilities.
Regarding copyrights
Images taken with the PENTAX Digital Camera that are for anything other than
personal enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are cases where
limitations are placed on taking pictures even for personal enjoyment during
demonstrations, performances or of items on display. Images taken with the
purpose of obtaining copyrights also cannot be used outside the scope of use of
the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
• SDXC Logo is a trademark of SD-3C, LLC.
• ArcSoft, and its logo are either the registered trademark or trademark of ArcSoft
Inc. in the United States and/or other countries.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in
the United States and other countries. Windows Vista is either a registered
trademark or trademark of Microsoft Corporation in the United States and/or
other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
• All other brands or product names are trademarks or registered trademarks of
their respective companies. In this manual, the ™ and ® marks are not
specified.
• This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to
produce images more faithful to their intentions. Some functions are not
available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
Regarding Product Registration
In order to better serve you, we request that you complete the product
registration, which can be found on the CD-ROM supplied with the camera or the
PENTAX website. Thank you for your cooperation.
Refer to “Connecting to a Computer” (p.137) for more information.
Downloaded From camera-usermanual.com
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as
radio transmitters could interfere with the monitor, damage the stored data, or
affect the product’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used for the display is manufactured using extremely
high precision technology. Although the level of functioning pixels is 99.99% or
better, you should be aware that 0.01% or fewer of the pixels may not illuminate
or may illuminate when they should not. However, this has no effect on the
recorded image.
• If you point the camera toward an object that is bright, a band of light may
appear on the screen display. This phenomenon is referred to as “smear” and
is not a malfunction of the camera.
• There is a possibility that the illustrations and the screen display in this manual
are different from the actual ones.
• In this manual, SD Memory Cards, SDHC Memory Cards, and SDXC Memory
Cards are referred to as SD Memory Cards hereafter.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or
a Macintosh hereafter.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this
camera and its accessories.
Using Your Camera Safely
We have paid close attention to the safety of this product. When using
this product, we request your special attention regarding items marked
with the following symbols.
Warning This symbol indicates that violating this item could
cause serious personal injuries.
Caution
This symbol indicates that violating this item could
cause minor or medium personal injuries, or loss of
property.
Downloaded From camera-usermanual.com
1
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are present
inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging
the camera, never touch the exposed portion. There is a risk of electric
shock.
• Wrapping the strap around your neck is dangerous. Take care that small
children do not hang the strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop
use immediately, remove the battery, and contact your nearest PENTAX
Service Center. Continuing to use the camera can cause a fire or electric
shock.
Caution
• Do not place your finger over the flash when discharging the flash. You
may burn yourself.
• Do not cover the flash with clothes when discharging the flash.
Discoloration may occur.
• Some portions of the camera heat up during use. There is a risk of low
temperature burns when holding such portions for long periods.
• Should the monitor be damaged, be careful of glass fragments. Also, be
careful not to allow the liquid crystal to get on your skin, in your eyes or
mouth.
• Depending on your individual factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality,
stop using the camera and get medical attention immediately.
About the Power Adapter
Warning
• Always use the power adapter exclusively developed for this camera, with
the specified power and voltage. Using a power adapter not exclusive to
this camera, or using the exclusive power adapter with an unspecified
power or voltage can cause a fire, electric shock, or camera breakdown.
The specified voltage is 100 - 240V AC.
Downloaded
From camera-usermanual.com
2
• Do not disassemble or modify the power adapter. This can cause a fire or
electric shock.
• If the generation of smoke or strange odor from the power adapter or other
abnormality occurs, immediately discontinue use and consult a PENTAX
Service Center. Continuing to use the adapter can cause a fire or electric
shock.
• If water should happen to get inside the power adapter, consult a PENTAX
Service Center. Continuing to use the adapter can cause a fire or electric
shock.
• If a thunder storm should occur while using the power adapter, unplug the
adapter and discontinue use. Continuing to use the adapter can cause
damage to the equipment, fire, or electric shock.
• Wipe off the plug of the power adapter if it becomes covered with dust.
Accumulated dust on the plug may cause a fire.
Caution
• Do not place or drop heavy objects on the power adapter. Doing so may
damage the adapter. Should the power adapter be damaged, consult a
PENTAX Service Center.
• Do not touch or short-circuit the terminal area of the power adapter while
the cord is plugged in.
• Do not handle the power adapter with wet hands. This can cause an
electric shock.
• Do not drop the power adapter, or subject it to violent impact. This can
cause equipment breakdown.
• Do not use the power adapter to charge a battery other than a
rechargeable lithium-ion battery D-LI108. This can cause an explosion, or
heating, or may damage the power adapter.
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in
their mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes, do
not rub them. Flush your eyes with clean water and get medical attention
immediately.
Downloaded From camera-usermanual.com
3
Caution
• Only use the specified battery with this camera. Use of other batteries may
cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an
explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or
begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an
explosion or fire.
• If any leakage from the battery should come in contact with skin or clothes,
wash the affected areas thoroughly with water.
• Precautions for D-LI108 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
Keep the Camera and its Accessories out of the Reach of Small
Children
Warning
• Do not place the camera and its accessories within the reach of small
children.
1. If the product falls or is operated accidentally, it may cause serious
personal injuries.
2. Wrapping the strap around a neck may cause suffocation.
3. To avoid the risk of a small accessory such as the battery or SD Memory
Cards from being swallowed by mistake, keep them out of the reach of
small children. Seek medical attention immediately if an accessory is
accidentally swallowed.
Downloaded
From camera-usermanual.com
4
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is included
in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, make sure that it is
still working properly, particularly prior to taking important pictures (such as
at a wedding or when traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
About the Battery
• Storing the battery fully charged may decrease the battery performance.
Avoid storing in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the
battery will over-discharge and shorten the battery’s life.
• Charging the battery a day before use or on the day of use is
recommended.
Precautions on Carrying and Using Your Camera
• Do not subject the camera to high temperatures or high humidity. Do not
leave the camera in a vehicle, as the temperature can get very high.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a
cushion to protect the camera from vibrations of motorcycles, automobiles,
or ships.
• The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
• The monitor may appear black at high temperatures, but will return to
normal at normal temperatures.
• The monitor may respond more slowly at low temperatures. This is due to
liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside and
outside of the camera. Place the camera in your bag or a plastic bag, and
remove it after the temperature of the camera and surroundings are
equalized.
Downloaded From camera-usermanual.com
5
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.
These could cause the camera to breakdown. Wipe the camera to dry off
any rain or water drops.
• Please do not press forcefully on the monitor. This could cause it to break
or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the display.
• Be careful not to overtighten the tripod screw when using a tripod.
• The lens on this camera is not interchangeable. The lens is not removable.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol or
benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a
spray blower for cleaning as it may damage the lens.
Storing Your Camera
• Do not store the camera with preservatives or chemicals. Storage in high
temperatures and high humidity can cause mold to grow on the camera.
Remove the camera from its case and store it in a dry and well-ventilated
location.
• Avoid using or storing the camera where it may be exposed to static
electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or where it may be
exposed to rapid changes in temperature or to condensation.
Other Precautions
• Periodic inspections are recommended every one to two years to maintain
high performance.
• Please note that deleting data, or formatting the SD Memory Cards or the
built-in memory does not completely erase the original data. Deleted files
can sometimes be recovered using commercially available software. It is
user’s responsibility to ensure the privacy of such data.
Downloaded
From camera-usermanual.com
6
• The SD Memory Card is equipped with a
write-protect switch. Setting the switch to
LOCK prevents new data from being
recorded on the card, the stored data from
being deleted, and the card from being
Write-protect
formatted by the camera or computer.
switch
r appears on the display when the card is
write-protected.
• Care should be taken when removing the SD Memory Card immediately
after using the camera, as the card may be hot.
• Keep the battery/card cover closed and do not remove the SD Memory
Card or turn the camera off while the data is being played back or saved to
the card, or the camera is connected to a computer with the USB cable, as
this may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it
away from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage
the card and render it unusable.
• The data on the SD Memory Card may be deleted in the following
circumstances. We do not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical
interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the battery is removed while
the data on the card is being recorded or accessed.
• If it is not used for a long time, the data on the card may become
unreadable. Be sure to regularly make a backup of important data on a
computer.
• When using an SD Memory Card with a slow recording speed, recording
may stop while you are taking movies even when there is adequate space
in the memory, or shooting and playback may take a long time.
• Be sure to format SD Memory Cards that are unused or have been used
on another camera. Refer to “Formatting the Memory” (p.123).
Downloaded From camera-usermanual.com
7
Downloaded From camera-usermanual.com
Taking Pictures in Basic Mode (Green Mode)................................61
Using the Zoom ..............................................................................63
Taking Pictures of Your Pet (Pet Mode) ......................................... 65
Framing Your Pictures (Frame Composite Mode) ..........................66
Taking Pictures of Text (Text Mode) .............................................. 67
Taking Pictures Using the Miniature/HDR Filter ............................. 68
Setting the Shooting Functions.........................................................70
Selecting the Flash Mode ............................................................... 70
Selecting the Drive Mode ............................................................... 71
Selecting the Focus Mode .............................................................. 73
Setting the [A Rec. Mode] Menu...................................................74
To Set the Focusing Area............................................................... 74
Selecting the Number of Recorded Pixels...................................... 75
Compensating for Exposure (EV Compensation)........................... 76
Adjusting the White Balance........................................................... 77
Setting the Sensitivity ..................................................................... 78
Switching the Face Detection Function .......................................... 79
Setting the Image Sharpness (Sharpness)..................................... 80
Setting the Color Saturation (Saturation)........................................ 81
Setting the Image Contrast (Contrast)............................................ 81
Setting the Date Imprint Function ...................................................81
Calling Up a Specific Function........................................................ 82
Recording Movies ............................................................................... 84
Recording a Movie..........................................................................84
Setting the [C Movie] Menu........................................................... 85
Selecting the Recorded Pixels for Movies ...................................... 86
Setting the Movie SR (Movie Shake Reduction) Function.............. 86
Saving the Settings (Memory) ........................................................... 87
Playing Back and Deleting Images
89
Playing Back Images ..........................................................................89
Playing Back Still Pictures .............................................................. 89
Playing Back a Movie ..................................................................... 90
Multi-Image Display ........................................................................91
Using the Playback Functions ........................................................ 93
Slideshow .......................................................................................94
Rotating an Image ..........................................................................96
Zoom Playback............................................................................... 97
Deleting Images .................................................................................. 98
Deleting a Single Image ................................................................. 98
Deleting Selected Images............................................................... 98
Deleting All Images......................................................................... 99
Downloaded From camera-usermanual.com
9
Downloaded From camera-usermanual.com
Connecting the Camera and the Computer..................................138
Disconnecting the Camera from the Computer ............................139
Using the Provided Software ........................................................... 140
System Requirements ..................................................................140
Installing the Software ..................................................................141
Using MediaImpression on Windows ...........................................144
Using MediaImpression on Macintosh.......................................... 146
Appendix
148
Functions Available for Each Shooting Mode................................148
Messages...........................................................................................150
Troubleshooting................................................................................ 152
Default Settings................................................................................. 154
List of World Time Cities..................................................................159
Optional Accessories ....................................................................... 160
Main Specifications ..........................................................................161
WARRANTY POLICY......................................................................... 165
Index................................................................................................... 171
Downloaded From camera-usermanual.com
11
In this manual, the method for operating the four-way controller is shown
in illustrations, such as in the ones below.
2
4
5
3
The meanings of the symbols used in this Operating Manual are
explained below.
1
indicates the reference page number for an explanation of the
related operation.
indicates information that is useful to know.
indicates precautions to be taken when operating the camera.
A mode
This is the mode for capturing still pictures and recording movies.
Q mode
This is the mode for viewing still pictures and playing back
movies.
Downloaded
From camera-usermanual.com
12
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started –––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera
before you start taking pictures. Be sure to read this chapter and follow the
instructions.
2 Common Operations ––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the
buttons and how to use the menus. For more details, refer to the respective
chapters below.
1
2
3
3 Taking Pictures ––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of capturing images and how to set
the relevant functions.
4 Playing Back and Deleting Images–––––––––––––––––––––––––
This chapter explains how to view still pictures and movies on the camera
or on a TV screen and how to delete them from the camera.
5 Editing and Printing Images ––––––––––––––––––––––––––––––
This chapter explains how to edit still pictures on the camera and how to
print them.
6 Settings –––––––––––––––––––––––––––––––––––––––––––––––
4
5
6
7
This chapter explains how to set the camera-related functions.
7 Connecting to a Computer –––––––––––––––––––––––––––––––
This chapter explains how to connect the camera to a computer, and
includes installation instructions and a general overview of the provided
software.
8
8 Appendix––––––––––––––––––––––––––––––––––––––––––––––
This chapter deals with troubleshooting and lists the optional accessories.
Downloaded From camera-usermanual.com
13
Camera Features
In addition to basic picture-taking, this camera has a variety of shooting
modes to suit different situations. This section describes how to make the
most of the key features of your camera. For details of camera
operations, refer to the pages for each function.
Easy-to-Navigate Capture and Playback
Functions!
The user-friendly design of this camera
enables easy operation with only a few
buttons. Simply by choosing the
appropriate icon, you can select the
shooting mode (p.57) and choose the
optimal settings for the situation, or the
playback mode (p.93, p.105) and enjoy
the various playback and editing
functions. A guide on the display lets
you check the functions available in
each mode and how to use them.
A shooting mode guide is displayed in the Capture Mode
Palette and a playback mode guide in the Playback Mode
Palette (p.57, p.93).
Use the Green Mode to take pictures easily using
standard settings (p.61).
Downloaded
From camera-usermanual.com
14
Perfect for Portrait Shots!
This camera comes with a “Face Detection” function that spots the faces
in your shot and automatically adjusts the focus and exposure for the
faces. It can detect up to 16 people per shot, so it will help you take
perfect group shots too. It will automatically release the shutter when one
or more of the subjects are smiling, so you can take many shots from
which you can choose the best.
Face Detection function (p.59)
Modes for taking stunning pictures of people (p.58)
Add Fun Frames to Your Pictures!
When you take a picture with this
camera, you can choose from our
original fun frames to create attractive
framed shots (p.66). You can also add
frames to pictures you have taken.
Adjust the position of the subject in the
picture or reduce or enlarge the picture
size to match the frame shape and
size. Now you no longer have to worry
about the subject not fitting into the
frame (p.113).
For decorating your pictures
with a frame
Display Your Data in Calendar Format!
With this camera, you can display recorded images and movies by date
in calendar format (p.92). This lets you quickly find the image or movie
you want to play back.
Downloaded From camera-usermanual.com
15
Downloaded From camera-usermanual.com
Checking the Contents of the Package
Camera
Optio LS465
Strap
O-ST116 (*)
Software (CD-ROM)
S-SW127
USB cable
I-USB116 (*)
Alternative Skins
(10 types)
Lens Ring O-LR2
(installed on camera)
Rechargeable lithium-ion
battery D-LI108 (*)
Power adapter
D-PA116 (*)
Quick Guide
Digital Camera
Operating Manual
To ensure the best performance from your camera, please
read the Operating Manual before using the camera.
Operating Manual
(this manual)
Items marked with an asterisk (*) are also available as optional accessories.
For other optional accessories, refer to “Optional Accessories” (p.160).
Downloaded From camera-usermanual.com
17
Names of Parts
Front
Flash
Self-timer lamp
Microphone
Lens
Battery/card cover
Speaker
Tripod socket
PC/AV terminal
Downloaded
From camera-usermanual.com
18
Back
Power switch
Shutter release button
Strap lug
Display
Names of Operating Parts
Power switch
Shutter release button
Zoom button
Q button
Movie button
Four-way controller
4 button
Green/i button
3 button
Refer to “Understanding the Button Functions” (p.42 - p.45) for an
explanation of the function of each button.
Downloaded From camera-usermanual.com
19
Monitor Indications
Display in A Mode
The display shows information such as the shooting conditions in
capture mode. The display changes in the following sequence each time
you press the 4 button: “Normal Display”, “No Info” and “Histogram +
Info”.
Normal Display
No Info
OK
38
04/04/2012
14:25
OK
OK
200
38
Histogram + Info
When the shooting mode is set to 9
(Green) mode, the monitor display is
as shown on the right. You cannot
change the information on the
display by pressing the 4 button
(p.61).
38
Downloaded
From camera-usermanual.com
20
Still Picture Capture Mode
(All of the display items are displayed here for explanatory purposes.)
A1 to A14 and B1 appear when “Normal Display” is selected. All the
icons appear when “Histogram + Info” is selected. Only B1 appears
when “No Info” is selected.
A14 A13 A12 A11
A1
A2
A3
A4
A5
A6
A7
B6
B1
+1.0
1/250
F3.5
B2
200
38
A8 A9 A10
Shooting mode (p.57)
Battery level indicator (p.33)
Face Detection mode (p.59)
Date Imprint setting (p.81)
EV Compensation (p.76)
Shutter speed
Aperture
Memory status (p.36)
Remaining image storage
capacity
World
Time setting (p.127)
A10
A1
A2
A3
A4
A5
A6
A7
A8
A9
B5 B4
B3
A11 Digital zoom/
Intelligent Zoom icon (p.63)
Focus
Mode (p.73)
A12
A13 Drive Mode (p.71)
A14 Flash Mode (p.70)
B1 Focus frame (p.54)
B2 Histogram (p.24)
B3 Sensitivity (p.78)
B4 White Balance (p.77)
B5 Recorded Pixels (p.75)
B6 Shake Reduction icon
* A3 varies depending on the [Face Detection] setting in the [A Rec.
Mode] menu.
I
J
When [Face Detection] is set to [On]
When [Face Detection] is set to [Smile]
If set to [Off], nothing appears in A3.
* A6 and A7 appear only when the shutter release button is pressed
halfway.
Downloaded From camera-usermanual.com
21
* When the shooting mode is b (Auto Picture) and if you press the
shutter release button halfway, the automatically selected shooting
mode appears in A1 even when “No Info” is selected (p.60).
* The current date and time (p.20) appear instead of B3 to B5 for two
seconds when “Normal Display” is selected.
* Some indications may not appear depending on the shooting mode.
Display in Q Mode
The display shows the shooting information of the image in playback
mode. The display changes in the following sequence each time you
press the 4 button: “Normal Display”, “No Info” and “Histogram + Info”.
Normal Display
100 - 0038
04/04/2012
Edit
14:25
OK
No Info
OK
Edit
OK
Histogram + Info
100 - 0038
1/250
F3.5
Edit
Downloaded
From camera-usermanual.com
22
200
Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. A1 to A8
appear when “Normal Display” or “Histogram + Info” is selected. B1 to
B6 appear only when “Histogram + Info” is selected.
A8
A7 A6 A5
100 - 0038
A1
A2
A3
B6
B5
1/250
F3.5
A4
B1
200
Edit
B4 B3
A1 Playback mode
Q : Still picture (p.89)
K : Movie (p.90)
A2 Battery level indicator (p.33)
A3 Protect icon (p.100)
A4 Four-way controller guide
A5 File number
A6 Folder number (p.130)
A7
A8
B1
B2
B3
B4
B5
B6
B2
Memory status (p.36)
Volume icon
Histogram (p.24)
Sensitivity (p.78)
White Balance (p.77)
Recorded Pixels (p.75)
Aperture
Shutter speed
* In “Normal Display”, A2 disappear if no operation is performed for two
seconds.
* A8 appears only when the volume is being adjusted during playback of
movies (p.90).
* A4 appears even when “No Info” is selected, but disappears if no operation
is performed for two seconds. When no operation is performed for two
seconds in “Normal Display” or “Histogram + Info”, only “Edit” disappears.
* Captured date and time (p.89) appear instead of B2 to B4 for two seconds
when “Normal Display” is selected.
Downloaded From camera-usermanual.com
23
Guide Indications
A guide indication for each available button/key operation appears as
follows on the display during operation.
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
2
3
4
5
MENU
Zoom button
SHUTTER
4 button
Shutter release button
X, i
Green/i button
OK
3 button
Using the Histogram
Number of pixels→
A histogram shows the
brightness distribution of an
image. The horizontal axis
represents brightness (dark at
the left and bright at the right)
and the vertical axis represents
the number of pixels.
The shape of the histogram
(Dark)
←Brightness→ (Bright)
before and after shooting tells
you whether the brightness and
contrast are correct or not, and lets you decide if you need to adjust the
exposure and take a picture again.
Compensating for Exposure (EV Compensation) 1p.76
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is
underexposed, the peak is on the left side, and if it is overexposed, the
peak is on the right side.
Dark image
Correct image
Downloaded
From camera-usermanual.com
24
Bright image
When the image is underexposed, the part to the left is cut off (dark
portions) and when the image is overexposed, the part to the right is cut
off (bright portions).
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The
graph peaks on both sides but sinks in the middle for images with a large
difference in contrast and low amounts of mid-level brightness.
Downloaded From camera-usermanual.com
25
Attaching the Strap
Gettin
g
Starte
d
Attach the strap supplied with the camera.
1
Getting Started
1
2
1
2
Pass the narrow end of the strap through the strap lug.
Pass the other end of the strap through the loop and
pull tight.
Downloaded
From camera-usermanual.com
26
Dress-up the Camera
The Alternative Skins are supplied with the camera. You can choose a
desired sheet and put it on the front of the camera to dress up.
1
Getting Started
Lens Ring
1
Front panel
5
2
3
4
1
Alternative Skin
Remove the lens ring.
Put the camera on a flat surface and detach the lens ring following the
direction of arrow 1.
Take care not to lose the lens ring.
2
3
Remove the front panel.
Put on an Alternative Skin.
Downloaded From camera-usermanual.com
27
Downloaded From camera-usermanual.com
Powering the Camera
Installing the Battery
Battery lock lever
Battery/card cover
Getting Started
Use the rechargeable lithium-ion battery D-LI108 that is provided with
the camera.
1
Battery
1
Make sure that the camera is turned off and open the
battery/card cover.
Slide the battery/card cover in the direction indicated by the arrow 1
and flip the cover open 2.
2
Push the battery lock lever in the direction of the arrow
3 and insert the battery so that the PENTAX logo is
facing the lens side of the camera.
Match the marks on the battery to the marks inside the battery
compartment and push the battery in until it is locked in place.
Downloaded From camera-usermanual.com
29
3
Close the battery/card cover.
Slide the battery/card cover in the opposite direction indicated by 1.
When you hear a click, the cover is securely closed.
1
Charge the battery before using it in the camera for the first time. (p.31)
Getting Started
To Remove the Battery
1
2
Make sure that the camera is turned off and open the
battery/card cover.
Push the battery lock lever in the direction of the arrow
3.
The battery will be ejected. Take care not to drop the battery when
removing it.
• This camera uses a rechargeable lithium-ion battery D-LI108. Use of
any other type of battery may damage the camera and cause a
malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented,
malfunction may result.
• When storing the battery for more than 6 months, charge the battery
for 30 minutes and store the battery separately from the camera.
Be sure to recharge the battery every 6 to 12 months. Storing the
battery at or below room temperature is ideal. Avoid storing it at high
temperature.
• The date and time may be returned to the default setting if the camera
is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the
camera is used continuously for a long period of time.
Downloaded
From camera-usermanual.com
30
Downloaded From camera-usermanual.com
1
Getting Started
• Do not use the power adapter D-PA116 to charge batteries other than
the rechargeable lithium-ion battery D-LI108, as the adapter may
overheat or be damaged.
• Make sure that the battery has been inserted correctly and the cable
is connected properly if the self-timer lamp blinks.
• Replace the battery with a new one in the following cases:
- If the battery starts to run down more quickly (the battery may have
reached the end of its service life)
- If the self-timer lamp does not light or blinks even after being
charged (the battery may be faulty)
• The time required to fully charge the battery is about 130 minutes (at
room temperature of 25°C). However, the charging time may vary
depending on the ambient temperature and charging conditions. The
appropriate ambient temperature for charging the battery is 0°C to
40°C (32°F to 104°F).
• The rechargeable lithium-ion battery D-LI108 can also be charged
using the optional battery charger D-BC108.
• The battery cannot be charged using a computer or similar devices. Do
not attempt to charge the battery by connecting the USB cable to a
computer.
• Image Storage Capacity, Movie Recording Time, and Playback
Time
(at 23°C with the display on and the battery fully charged)
Image Storage Capacity*1
(flash used for 50% of shots)
Approx. 200 pictures
Movie Recording Time*2
Playback Time*2
Approx. 70 min.
Approx. 130 min.
*1 Image Storage Capacity shows the approximate number of shots
recorded during CIPA-compliant testing (with display on, flash used for
50% of the shots, and 23 degrees centigrade). Actual performance may
vary according to operating conditions.
*2 According to the result of in-house testing.
• In general, battery performance may temporarily deteriorate as the
temperature decreases.
• Be sure to take a spare battery with you when traveling abroad or to a
cold region, or if you intend to take a lot of pictures.
Downloaded
From camera-usermanual.com
32
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera will turn off after this message appears.
Downloaded From camera-usermanual.com
1
Getting Started
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
33
Installing an SD Memory Card
1
Getting Started
This camera uses a commercially available SD Memory Card, SDHC
Memory Card, or SDXC Memory Card. Captured images are saved on
the SD Memory Card when a card is inserted in the camera. They are
saved in the built-in memory when a card is not inserted (p.36).
Be sure to use this camera to format (initialize) an SD Memory Card
that is unused or has been used on other cameras or digital
devices. Refer to “Formatting the Memory” (p.123) for instructions
on formatting.
• The number of still pictures that can be stored and movie recording
time vary depending on the capacity of the SD Memory Card and the
selected number of recorded pixels.
- Choose the appropriate number of recorded pixels for still pictures
on the [A Rec. Mode] menu. Refer to “Selecting the Number of
Recorded Pixels” (p.75) for details.
- Choose the appropriate number of recorded pixels for movies on the
[C Movie] menu. Refer to “Selecting the Recorded Pixels for
Movies” (p.86) for details.
- For an approximate guide to the number of still pictures or the length
of recorded movies that can be saved on an SD Memory Card or in
the built-in memory, see “Main Specifications” (p.162).
• The self-timer lamp blinks while the SD Memory Card is being
accessed (data is being recorded or read).
Backing Up Data
The camera may not be able to access data in the SD Memory Card or built-in
memory in the case of a malfunction. Use a computer or other device to back
up important data in another location.
Downloaded
From camera-usermanual.com
34
Battery/card cover
1
Getting Started
SD Memory
Card
SD Memory
Card socket
1
Make sure that the camera is turned off and open the
battery/card cover.
Slide the battery/card cover in the direction indicated by the arrow 1
and flip the cover open 2.
2
Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing the lens side of the
camera.
Push the card in until it clicks. Data may not be recorded correctly if the
card is not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
3
Close the battery/card cover.
Slide the battery/card cover in the opposite direction indicated by 1.
When you hear a click, the cover is securely closed.
Downloaded From camera-usermanual.com
35
Turning the Camera On and Off
Power switch
1
Getting Started
1
Press the power switch.
The camera turns on and the display turns on.
When you turn the camera on, the lens cover opens and the lens
extends.
If the [Language/u] screen or [Date Adjustment] screen appears
when you turn the camera on, follow the procedure on p.37 to set the
display language and/or current date and time.
2
Press the power switch again.
The display turns off, the lens closes, and the camera turns off.
Taking Still Pictures 1p.54
Checking the SD Memory Card
The SD Memory Card is checked when
the camera turns on and the memory
status is displayed.
a
+
r
The SD Memory Card is inserted. Images
will be saved on the SD Memory Card.
The SD Memory Card is not inserted.
Images will be saved in the built-in
memory.
The write-protect switch on the SD
Memory Card is in the LOCK position
(p.6). Images cannot be recorded.
Downloaded
From camera-usermanual.com
36
38
04/04/2012
Memory status
14:25
Initial Settings
The language, date, and time can be changed later. Refer to the pages below
for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.129).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.125).
1
Getting Started
The [Language/u] screen appears when the camera is turned on for
the first time. Perform the operations in “Setting the Display Language”
below to set the language, and in “Setting the Date and Time” (p.40) to
set the current date and time.
Setting the Display Language
Four-way controller
4 button
3 button
1
2
Use the four-way controller (2345) to choose the
desired display language.
Press the 4 button.
The [Initial Setting] screen appears in
the selected language. If the desired
settings for [Hometown] and [DST]
(Daylight Saving Time) appear,
proceed to Step 9.
Proceed to Step 3 if the desired
settings do not appear.
Initial Setting
English
Hometown
New York
Settings complete
DST
OFF
MENU Cancel
Daylight saving time
Downloaded From camera-usermanual.com
37
If you accidentally select the wrong language and proceed to the next
procedure, perform the following operation to set the desired language.
1
When the Wrong Language Has Been Inadvertently Selected
Getting Started
1
2
Press the four-way controller (5).
Use the four-way controller (2345) to select the
desired language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
2
3
4
5
6
7
Press the 3 button.
The setting screen is canceled and the camera is set to still picture
capture mode.
Press the 3 button.
The [A Rec. Mode] menu appears.
Press the four-way controller (5) twice.
The [W Setting] menu appears.
Use the four-way controller (23) to select [Language/
u].
Press the four-way controller (5).
The [Language/u] screen appears.
Use the four-way controller (2345) to select the
desired language.
Press the 4 button.
The [W Setting] menu appears in the selected language.
To reset the Hometown city, date, and time, refer to the pages below for
instructions.
• To change the Hometown city, follow the steps in “Setting the World Time”
(1p.127).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.125).
Downloaded
From camera-usermanual.com
38
3
Press the four-way controller (3).
The frame moves to [W Hometown].
4
Press the four-way controller
(5).
1
Initial Setting
Hometown
New York
Settings complete
Getting Started
English
The [W Hometown] screen appears.
DST
OFF
MENU Cancel
5
Use the four-way controller
(45) to choose a city.
Hometown
City
New York
DST
MENU Cancel
6
OK
OK
Press the four-way controller (3).
The frame moves to [DST] (Daylight Saving Time).
7
8
Use the four-way controller (45) to select O (On) or P
(Off).
Press the 4 button.
The [Initial Setting] screen reappears.
9
10
Press the four-way controller (3) to select [Settings
complete].
Press the 4 button.
The [Date Adjustment] screen appears. Next, set the date and time.
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. Refer to “List of World Time Cities”
(p.159) for the video output format of each city that will be set at the time of initial
setting, and “Changing the Video Output Format” (p.131) for changing the video
output format.
Downloaded From camera-usermanual.com
39
Setting the Date and Time
Set the current date and time and the display style.
1
1
Press the four-way controller (5).
Getting Started
The frame moves to [mm/dd/yy].
2
Use the four-way controller
(23) to choose the date
format.
Choose from [mm/dd/yy], [dd/mm/yy]
or [yy/mm/dd].
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2012
Time
00:00
Settings complete
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [24h].
4
5
Use the four-way controller (23) to select [24h] (24hour display) or [12h] (12-hour display).
Press the four-way controller (5).
The frame returns to [Date Format].
6
Press the four-way controller (3).
The frame moves to [Date].
7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller (23) to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in Step 4, the camera automatically switches the
display between am and pm corresponding to the time.
9
10
Press the four-way controller (3) to select [Settings
complete].
Press the 4 button.
This confirms the date and time.
Downloaded
From camera-usermanual.com
40
If you press the 4 button in Step 10, the camera clock is reset to 0
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 0 seconds.
The language, date, time, Hometown city, and DST setting can be changed.
Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.129).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.125).
• To change the Hometown city or DST setting, follow the steps in “Setting the
World Time” (1p.127).
Downloaded From camera-usermanual.com
1
Getting Started
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the settings made up to that point and switch to the capture
mode by pressing the 3 button. In this case, the [Initial Setting]
screen will appear again the next time you turn the camera on.
41
Understanding the Button Functions
A Mode
1
2
Common Operations
2
3
4
5
6
7
8
9
1
Power switch
Turns the camera on and off (p.36).
2
Shutter release button
Focuses the camera on the subject when pressed halfway in still
picture capture mode (except in 3 and s modes).
Takes a still picture when pressed down fully (p.55).
3
Zoom button
Changes the area captured by the camera (p.63).
Switches to the [A Rec. Mode] menu, [C Movie] menu, or [W Setting]
menu when a menu screen is displayed.
4
Q button
5
Movie button
Switches to the Q mode (p.46).
Starts and stops movie recording (p.84).
Downloaded
From camera-usermanual.com
42
Comm
on
Operat
ions
6
Four-way controller
2
3
4
5
7
Changes the drive mode (p.71).
Displays the Capture Mode Palette (p.57).
Changes the flash mode (p.70).
Changes the focus mode (p.73).
4 button
Changes the information on the display (p.20).
Green button
Switches to the 9 (Green) mode (p.61).
Calls up the assigned function (p.82).
9
3 button
Displays the [A Rec. Mode] menu (p.47).
Downloaded From camera-usermanual.com
2
Common Operations
8
43
Downloaded From camera-usermanual.com
5
Four-way controller
2
3
45
6
4 button
Changes the information on the display (p.22).
Returns to single-image display during six-/twelve-image display or
zoom display (p.91, p.97).
Changes to twelve-image display of the selected folder during folder
display (p.92).
Changes to single-image display of the selected date during calendar
display (p.92).
7
2
Common Operations
2345
Plays back or pauses a movie (p.90).
Displays the Playback Mode Palette (p.93).
Stops a movie during playback (p.90).
Displays the previous or next image during single-image
display (p.89).
Fast-forwards, fast-reverses, frame forwards, frame
reverses, plays back a movie in forward and reverse
during movie playback (p.90).
Selects an image during six-/twelve-image display, a
folder during folder display, and a date during calendar
display (p.91, p.92).
Moves the display area during zoom display (p.97).
Moves the image when using the Frame Composite
function (p.113).
Green/i button
Switches from single-image display to the Delete screen (p.98).
Switches from six-/twelve-image display to the Select & Delete screen
(p.98).
Switches from folder display to the calendar display screen (p.92).
Switches from calendar display to the folder display screen (p.92).
8
3 button
Displays the [W Setting] menu during single-image display (p.47).
Returns to single-image display during Playback Mode Palette display
(p.93).
Returns to single-image display during six-/twelve-image display or
zoom display (p.91).
Changes to twelve-image display during folder or calendar display
(p.92).
Downloaded From camera-usermanual.com
45
Switching Between A Mode and Q Mode
2
In this manual, the capture mode, such as for taking still pictures, is
referred to as “A mode” (the capture mode). The playback mode, such
as for viewing the captured images on the display, is referred to as “Q
mode” (the playback mode). In Q mode, you can perform simple editing
operations on the captured images.
Follow the procedure below to switch between A mode and Q mode.
Common Operations
To Switch from A Mode to Q Mode
1
Press the Q button.
The camera switches to Q mode.
To Switch from Q Mode to A Mode
1
Press the Q button or the shutter release button
halfway.
The camera switches to A mode.
Displaying the data stored in the built-in memory
When an SD Memory Card is inserted in the camera, images and
movies stored on the SD Memory Card are displayed.
To display images and movies stored in the built-in memory, turn the
camera off first, and then remove the SD Memory Card before
proceeding.
Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
Downloaded
From camera-usermanual.com
46
Setting the Camera Functions
To change the camera settings, press the 3 button to display the
menu screens. Functions for playing back and editing images are called
up from the Playback Mode Palette (p.93).
2
Operating the Menus
Rec. Mode
1/3
Recorded Pixels
White Balance
Focusing Area
Sensitivity
EV Compensation
Face Detection
Common Operations
There are three menus available with the camera: [A Rec. Mode],
[C Movie], and [W Setting].
Press the 3 button in A mode to display the [A Rec. Mode] menu.
Press the 3 button in Q mode to display the [W Setting] menu.
Use the four-way controller (45) or zoom button to switch between the
menus.
AWB
Auto
0.0
On
MENU Exit
W
Setting
T
W
1/3
Sound
Date Adjustment 01/01/2012
World Time
English
Folder Name
Date
USB Connection MSC
T
T
Movie
Recorded Pixels
Movie SR
W
MENU Exit
MENU Exit
Available button operations appear on the display during menu
operation (p.24).
Downloaded From camera-usermanual.com
47
Ex.) To set [Focusing Area] on the [A Rec. Mode] menu
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller
(3).
The frame moves to [Recorded
Pixels].
2
Rec. Mode
Common Operations
Recorded Pixels
White Balance
Focusing Area
Sensitivity
EV Compensation
Face Detection
1/3
AWB
Auto
0.0
On
MENU Exit
3
Press the four-way controller (3) twice.
The frame moves to [Focusing Area].
4
Press the four-way controller
(5).
A pull-down menu appears only with
the items that are available with the
current camera settings.
Rec. Mode
Recorded Pixels
White Balance
Focusing Area
Sensitivity
EV Compensation
Face Detection
1/3
AWB
Auto
0.0
On
MENU Exit
5
Use the four-way controller
(23) to change the setting.
The focusing area changes each
time the four-way controller (23) is
pressed.
Rec. Mode
Recorded Pixels
White Balance
Focusing Area
Sensitivity
EV Compensation
Face Detection
MENU Cancel
6
1/3
AWB
Auto
0.0
On
OK
OK
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting the other
functions.
To exit the setting operation, press the 3 button.
To perform another operation, refer to the following alternate Step 6
options.
Downloaded
From camera-usermanual.com
48
To Save the Setting and Start Taking Pictures
6
Press the shutter release button halfway.
The setting is saved and the camera returns to capture status.
When the shutter release button is pressed fully, the picture is taken.
When the [W Setting] menu is displayed from Q mode, you can switch
to A mode by pressing the Q button.
6
Press the Q button.
When the [A Rec. Mode] menu is displayed from A mode, the setting
is saved and the camera returns to playback status.
To Cancel the Changes and Continue with Menu Operations
6
Common Operations
To Save the Setting and Start Playback of Images
2
Press the 3 button.
The changes are canceled and the screen shown in Step 3 reappears.
The 3 button function varies depending on the screen. Refer to the
guide indications.
MENU Exit
Exits the menu and returns to the original screen.
MENU
Returns to the previous screen with the current
setting.
MENU Cancel
Cancels the current selection, exits the menu and
returns to the previous screen.
Downloaded From camera-usermanual.com
49
Menu List
2
This displays the items that can be set from the menus and provides
descriptions of each item. See the list of default settings in the Appendix
“Default Settings” (p.154) to check whether the settings are saved when
the camera is turned off and whether the settings return to the defaults
when the camera is reset.
Common Operations
[A Rec. Mode] Menu
Item
Description
Recorded Pixels For choosing the number of recorded pixels for still pictures
For adjusting the color balance according to the light
White Balance
conditions
Focusing Area
For changing the autofocus area
Sensitivity
For setting the sensitivity
EV Compensation For adjusting the overall brightness of the picture
For spotting the faces in your shot and automatically
Face Detection
adjusting the focus and exposure for the faces
For choosing whether or not to use the Digital Zoom function
Digital Zoom
For choosing whether to save the set values of the shooting
Memory
function or return to the defaults when the camera is turned off
For assigning a function to the Green button so that you can
Green Button
go straight to it in A mode
Sharpness
For choosing sharp or soft outlines
Saturation
For setting the color saturation
Contrast
For setting the image contrast level
For choosing whether to imprint the date and/or time when
Date Imprint
taking still pictures
Downloaded
From camera-usermanual.com
50
Page
p.75
p.77
p.74
p.78
p.76
p.79
p.64
p.87
p.82
p.80
p.81
p.81
p.81
[A Rec. Mode] Menu 1
Rec. Mode
1/3
Recorded Pixels
White Balance
Focusing Area
Sensitivity
EV Compensation
Face Detection
AWB
Auto
0.0
On
Rec. Mode
2/3
Digital Zoom
Memory
Green Button
Sharpness
Saturation
Contrast
MENU Exit
[A Rec. Mode] Menu 3
Rec. Mode
3/3
Off
Date Imprint
2
Common Operations
MENU Exit
[A Rec. Mode] Menu 2
MENU Exit
• Use the 9 (Green) mode to enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec. Mode] menu (p.61).
• Assigning a frequently used function to the Green button enables you
to go straight to the desired function (p.83).
[C Movie] Menu
Item
Recorded Pixels
Movie SR
Description
Page
For choosing the number of recorded pixels for movies p.86
For choosing whether or not to use the Movie Shake
p.86
Reduction function
Movie
Recorded Pixels
Movie SR
MENU Exit
Downloaded From camera-usermanual.com
51
Downloaded From camera-usermanual.com
[W Setting] Menu 1
Setting
[W Setting] Menu 2
Setting
1/3
Sound
Date Adjustment 01/01/2012
World Time
English
Folder Name
Date
USB Connection MSC
MENU Exit
[W Setting] Menu 3
Setting
3/3
Delete All
Pixel Mapping
Playback Mode
Format
2/3
NTSC
Off
5s e c .
3min.
2
Common Operations
MENU Exit
Video Out
Wallpaper
Brightness Level
Power Saving
Auto Power Off
Reset
MENU Exit
Downloaded From camera-usermanual.com
53
Taking Still Pictures
Taking
Picture
s
Shutter release
button
Power switch
Zoom button
Four-way controller
4 button
Green button
3
Taking Pictures
Taking Pictures
This camera features a wide range of shooting modes and functions to
suit almost any subject or scene. This chapter describes how to take
pictures with the most commonly used standard settings (the factory
default settings).
1
Press the power switch.
The camera turns on in “still picture capture mode”.
2
Check the subject and
shooting information on the
display.
The focus frame in the middle of the
display indicates the zone of
automatic focusing.
38
04/04/2012
14:25
Focus frame
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection
frame appears (p.59).
You can change the captured area by
pressing the zoom button (p.63).
Right (T)
Enlarges the subject.
Left (W) Widens the area that
is captured by the
camera.
Downloaded
From camera-usermanual.com
54
38
04/04/2012
Face detection frame
14:25
Downloaded From camera-usermanual.com
Using the Shutter Release Button
The shutter release button works in a two-step action as follows.
Press halfway
This refers to pressing the shutter release button gently to the first
position. This locks the focus setting and the exposure. The green focus
frame is displayed on the monitor when the shutter release button is
pressed halfway and the subject is in focus. If the subject is out of focus,
the white focus frame appears.
3
Taking Pictures
Press fully
This refers to pressing the shutter release button all the way down to the
fully depressed position. This takes a picture.
Not pressed
Pressed halfway
Pressed fully
(first position) (second position)
Poor focusing conditions
The camera may not be able to focus under the following conditions. In these
cases, lock the focus on an object the same distance away as the subject (by
pressing and holding the shutter release button halfway), then aim the camera
at your subject and press the shutter release button fully.
• Objects that lack contrast such as a blue sky or white wall
• Dark places or objects, or conditions that prevent light from being reflected
back
• Intricate patterns
• Fast moving objects
• When there is an object in the foreground and an object in the background in
the captured area
• Strongly reflected light or strong backlighting (bright background)
Downloaded
From camera-usermanual.com
56
Instant Review
Immediately after capturing an image, it appears on the screen display
(Instant Review).
Setting the Shooting Mode
This camera has a variety of shooting modes that let you take pictures in
different situations simply by choosing the appropriate mode for the
particular situation from the Capture Mode Palette.
3
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to choose a
shooting mode.
When an icon is selected in the
Capture Mode Palette, the guide for
the selected shooting mode appears.
3
1/2
Landscape
For capturing landscape
views. Enhances colors
of sky and foliage
MENU Cancel
OK
Taking Pictures
1
OK
Press the 4 button.
The shooting mode is fixed and the camera returns to capture status.
Downloaded From camera-usermanual.com
57
There are 23 shooting modes which can be selected from the Capture
Mode Palette.
Shooting Mode
Automatically selects the best capture mode. (1p.60)
R Program
Used for basic shooting. Various functions can also be set
with this mode. (1p.61)
Emphasizes saturation of the sky to produce a bright
image.
For capturing landscape views. Enhances colors of sky
and foliage.
f Blue Sky
a
3
Description
b Auto Picture
Landscape
Taking Pictures
b Flower
K Sunset
For images of flowers. The outline of the flower is softened.
For images of sunsets and warm lighting.
For night time images. Use of a tripod or other support is
suggested.
For images of people at night. Use of a tripod or other
support is advised.
Night Scene
When the flash mode is set to , (Auto) and the camera
B Portrait
detects a person’s face, the flash mode automatically
changes to d (Flash On + Red-eye).
For capturing portraits. Reproduces a healthy and bright
c Portrait
skin tone.
For images of people. Enhances skin tones while
d Natural Skin Tone smoothing blemishes.
For images of food and prepared dishes. Enhances
K Food
saturation and contrast.
Higher sensitivity reduces blur.
The sensitivity is automatically set to [Auto] and the
Digital
SR
c
number of recorded pixels is fixed at f for the 4:3 aspect
ratio and 1 for the 16:9 aspect ratio.
For capturing moving kids. Reproduces a healthy and
Kids
R
bright skin tone.
For capturing moving pets. Select the color according to
H Pet
the pet’s coat. (1p.65)
For a fast moving subject. Tracks the subject until the
\ Sport
picture is taken.
For bright images such as sand or snow. Accurately
Q Surf & Snow
meters for bright scenes.
For capturing fireworks. Use of a tripod or other support is
suggested.
S Fireworks
The shutter speed is fixed at 4 seconds and the sensitivity
is fixed at the minimum value.
A Night Scene
N Frame Composite For capturing images with a frame. (1p.66)
Downloaded
From camera-usermanual.com
58
Shooting Mode
B
Party
U
Candlelight
c
Text
o Miniature Filter
p HDR Filter
Description
For capturing images at parties or in dim light. Increases
ISO and clarity.
For capturing scenes in candlelight.
Captures text in an easy to read manner. Text contrast can
be adjusted. (1p.67)
For capturing an image with the subject looks like
miniature objects. (1p.68)
For capturing an image with HDR-like effect. (1p.68)
* In addition to the modes listed above, 9 (Green) mode (p.61) is also available.
3
Taking Pictures
• In shooting modes other than R, A, c, N, o and p,
saturation, contrast, sharpness, white balance, etc. are set to the
optimal settings for the selected mode.
• In R, H or \ mode, the camera tracks the subject and continues to
focus on it. When [Focusing Area] (p.74) is set to J (Multiple) or K
(Spot), focus can be locked by pressing the shutter release button
halfway.
• Some functions may not be available or may not work fully depending
on the selected shooting mode. For details, refer to “Functions
Available for Each Shooting Mode” (p.148).
Using the Face Detection Function
With this camera, the Face Detection
function is available with all shooting
modes.
When the camera detects a person’s
face in the image, the Face Detection
function displays a yellow face detection
04/04/2012
14:25
38
frame around the face on the screen
Face detection frame
display, sets the focus (Face Detection
AF) and compensates the exposure
(Face Detection AE).
If the subject in the face detection frame
moves, the frame also moves and changes its own size as it tracks the face.
Downloaded From camera-usermanual.com
59
Downloaded From camera-usermanual.com
The following restrictions apply in b mode:
• [Face Detection] cannot be set to [Off].
• The focusing area setting is fixed at J (Multiple).
• The
(Flower) mode cannot be selected when using digital zoom or
Intelligent Zoom.
• If the
(Night Scene Portrait) mode is selected when the flash mode
is set to , (Auto), the flash mode automatically changes to d (Flash
On + Red-eye) when the camera detects a face and determines that
the flash is needed.
1
2
Use the four-way controller (2345) to select R
(Program) from the Capture Mode Palette.
Press the 4 button.
The R mode is selected and the camera returns to capture status.
When the camera detects a person’s face, the Face Detection function
is activated and the face detection frame appears (p.59).
3
3
Taking Pictures
Taking Pictures in the Custom Settings
(Program Mode)
Change the settings as needed.
Refer to “Setting the Shooting Functions” (p.70 - p.83) for details on
how to set the functions.
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
Taking Pictures in Basic Mode (Green Mode)
In 9 (Green) mode, you can enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec. Mode] menu.
The 9 mode settings are as shown below.
Downloaded From camera-usermanual.com
61
Downloaded From camera-usermanual.com
Using the Zoom
You can use the zoom to change the captured area.
1
Press the zoom button in A
mode.
1.0 m-
36.0 x
3
Taking Pictures
Right (T) Tele Enlarges the
subject.
Left (W) Wide Widens the area
that is captured by
38
the camera.
Zoom ratio
When you continue to press the
button towards the right (T), the
Focus range
(during zooming only)
camera automatically switches from
Zoom bar
optical zoom to Intelligent Zoom and
stops at the point where the zoom
switches to digital zoom.
Once the button is released and pressed again, the camera switches
to digital zoom.
The zoom bar is displayed as follows.
Zoom in with high
image quality.
Optical zoom range*1
Zoom in with some degree
of image deterioration.
Intelligent
Zoom range*2
Digital zoom
range
*1 You can zoom in to a maximum of 5× optically.
*2 The Intelligent Zoom range differs depending on the number of
recorded pixels. See the following table.
Downloaded From camera-usermanual.com
63
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
5
Press the 4 button.
The framed image appears on the display.
When the camera detects a person’s face, the Face Detection function
is activated and the face detection frame appears (p.59).
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7
Press the shutter release button fully.
The picture is taken.
Taking Pictures
• The number of recorded pixels is fixed at h for the 4:3 aspect ratio
and h for the 16:9 aspect ratio.
• Frames cannot be added to movies.
• By default, three frames are built-in to the camera. These frames are
not deleted even if the built-in memory is formatted.
• The CD-ROM supplied with the camera contains optional frames. To
save the frames into the built-in memory, copy the files from the CDROM (p.115).
3
Adding a Frame to a captured image 1p.113
Taking Pictures of Text (Text Mode)
The c (Text) mode allows you to take clear pictures of written text. This
is convenient for capturing a digital copy of an important document or
enhancing the legibility of small print.
c
d
c
d
1
Color
Maintains the original color of the text.
Neg. Color
Reverses the color of the text.
B&W
Turns the color of the text into black and white.
Neg. B & W
Turns the color of the text into reversed black and white.
Use the four-way controller (2345) to select c (Text)
from the Capture Mode Palette.
Downloaded From camera-usermanual.com
67
2
Press the 4 button.
The c mode selection screen
appears.
MENU Cancel
3
3
4
OK
OK
Use the four-way controller (23) to select c, d, c or d.
Press the 4 button.
Taking Pictures
The selected icon appears and the camera returns to capture status.
If the camera detects a person’s face when c (Color) is selected, the
Face Detection function is activated and the face detection frame
appears (p.59).
5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The picture is taken.
Taking Pictures Using the Miniature/HDR Filter
In o (Miniature)/p (HDR) Filter mode, you can take impressive
pictures using the filter.
o Miniature Filter
p HDR Filter
1
For capturing an image with the subject looks like miniature
objects. The number of recorded pixels is fixed at f for
the 4:3 aspect ratio and 1 for the 16:9 aspect ratio.
For capturing an image with HDR-like effect.
Use the four-way controller (2345) to select o
(Miniature) or p (HDR) from the Capture Mode
Palette.
Downloaded
From camera-usermanual.com
68
2
Press the 4 button.
When the o mode is selected, the screen for selecting the area to
be blurred is displayed.
When the p mode is selected, proceed to Step 5.
3
Use the four-way controller
(45) to select an option.
4
3
MENU Cancel
OK
OK
Press the 4 button.
The o or p mode is selected and the camera returns to capture
status.
When the camera detects a person’s face, the Face Detection function
is activated and the face detection frame appears (p.59).
5
Taking Pictures
Focuses on the bottom of the
image and blurs the top.
Focuses on the center of the
image and blurs the top and
bottom.
Focuses on the top of the
image and blurs the bottom.
Select the range to blur
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The picture is taken.
Processing the captured images by using the Miniature/HDR filter 1 p.108
Downloaded From camera-usermanual.com
69
Setting the Shooting Functions
Selecting the Flash Mode
3
The flash discharges automatically depending on the
light conditions. If the Face Detection function is
activated, the flash mode is automatically set to d.
The flash does not discharge, regardless of the
brightness. Use this mode to take pictures where flash
photography is prohibited.
Taking Pictures
,
Auto
a
Flash Off
b
Flash On
The flash discharges regardless of the brightness.
d
Flash On + Red-eye
This mode reduces the phenomenon of red eyes caused
by the light from the flash being reflected in the subject’s
eyes. The flash discharges regardless of the light
conditions. A pre-flash discharges before the main flash.
• The flash mode is fixed at a in the following situations:
- When S (Fireworks) is selected as the shooting mode
- When recording a movie
- When j (Continuous Shooting) or q (Burst Shooting) is selected
as the drive mode
- When s (Infinity) is selected as the focus mode
• In 9 (Green) mode, you can only select , or a.
• In A (Night Scene) mode, you cannot select ,.
Using the flash when capturing images at a close distance may cause
the light distribution to be uneven.
1
Press the four-way controller
(4) in A mode.
The [Flash Mode] screen appears.
The flash mode changes each time
the button is pressed. You can also
change the setting using the four-way
controller (23).
2
Flash Mode
Auto
MENU Cancel
Press the 4 button.
The setting is saved and the camera returns to capture status.
Downloaded
From camera-usermanual.com
70
OK
OK
About the red-eye phenomenon
Taking pictures using the flash may cause the subject’s eyes to appear red in
the resulting picture. This phenomenon occurs when the light from the flash is
reflected in the subject’s eyes. It can be reduced by illuminating the area around
the subject or moving closer to the subject and zooming out to a wider angle.
Setting the flash mode to d is also an effective way of reducing red eyes.
If the subject’s eyes appear red despite such precautions, they can be corrected
by the red-eye compensation function (p.112).
Saving the Flash Mode setting 1p.87
3
g
Self-timer
Z
2 sec. Self-timer
j
Continuous
Shooting
q
Burst Shooting
1
Use this mode when you want to be included in a group
picture. The picture is taken approximately ten seconds
after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken
approximately two seconds after the shutter release button
is pressed.
Each time an image is taken, it is saved in the memory
before the next image is taken. The higher the image
quality, the longer the interval between shots.
You can continue shooting until the capacity of the SD
Memory Card or the built-in memory is full.
The number of recorded pixels is fixed at f for the 4:3
aspect ratio and 1 for the 16:9 aspect ratio.
Taking Pictures
Selecting the Drive Mode
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
The drive mode changes each time the button is pressed. You can also
change the mode using the four-way controller (45).
To select Z, press the four-way controller (3) after choosing g, and
then use the four-way controller (45).
2
Press the 4 button.
The setting is saved and the camera
returns to capture status.
Drive Mode
Self-timer
MENU Cancel
Downloaded From camera-usermanual.com
OK
OK
71
Downloaded From camera-usermanual.com
Selecting the Focus Mode
= Standard
Macro
r
Super Macro
3 Pan Focus
s
1
Infinity
Press the four-way controller
(5) in A mode.
The [Focus Mode] screen appears.
The focus mode changes each time
the button is pressed. You can also
change the setting using the four-way
controller (23).
2
3
Taking Pictures
q
This mode is used when the distance to the subject is 40 cm (16
in.) or more. The camera is focused on the subject in the autofocus
area when the shutter release button is pressed halfway.
When the subject is close to the camera, the Auto-Macro function
is activated and q appears on the display.
This mode is used when the distance to the subject is
approx. 10 cm to 50 cm (4 in. to 20 in.). The camera is
focused on the subject in the autofocus area when the
shutter release button is pressed halfway.
This mode is used when the distance to the subject is approx. 5 cm
to 20 cm (2 in. to 8 in.). The camera is focused on the subject in the
autofocus area when the shutter release button is pressed halfway.
This mode is used when you ask someone to take pictures for you,
or when taking pictures of the scenery through the window of a car
or train. The entire picture, from the front to the back, is focused.
This mode is used for taking distant objects. The flash is set
to a (Flash Off).
Focus Mode
Standard
MENU Cancel
OK
OK
Press the 4 button.
The setting is saved and the camera returns to capture status.
• In 9 (Green) mode, you can only select =, q or 3.
• The focus mode is fixed at s in S (Fireworks) mode.
• When shooting with q selected, if the subject is further than 50 cm
away, the camera automatically focuses to ∞ (Infinity). By pressing the
shutter release button fully, you can also take a picture even when the
focus is not set.
Saving the Focus Mode setting 1p.87
Downloaded From camera-usermanual.com
73
Setting the [A Rec. Mode] Menu
To set the main shooting functions, choose each function on the [A
Rec. Mode] menu. Refer to the explanation of the respective functions
for how to change the settings.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Taking Pictures
3
Use the four-way controller (23) to select an item and
change its setting.
Press the 3 button after changing the setting.
The A mode screen reappears. The setting is saved and the camera
returns to capture status.
To Set the Focusing Area
You can change the autofocus area (Focusing Area).
J Multiple
K Spot
W Automatic Tracking AF
1
2
Normal autofocus area
The autofocus area becomes smaller.
Keeps moving subjects in focus.
Use the four-way controller (23) to select [Focusing
Area] in the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
3
4
Use the four-way controller (23) to change the
focusing area setting.
Press the 4 button.
The setting is saved.
In 9 (Green), b (Auto Picture) and S (Fireworks) modes, the focusing
area is fixed at J.
Downloaded
From camera-usermanual.com
74
Selecting the Number of Recorded Pixels
You can choose from six recorded pixels settings for still pictures.
The larger the number of recorded pixels, the clearer the details will
appear when you print your picture. As the quality of the printed picture
also depends on the image quality, exposure control, resolution of the
printer, and other factors, you do not need to select more than the
required number of recorded pixels. The more pixels there are, the larger
the picture and the bigger the file size.
Refer to the following table for the appropriate settings according to
expected usage.
Expected Usage
4608×3456
For printing high quality photos or A4-size or larger
prints, or editing images on a computer.
o 4608×2592
6
3072×2304
h 1920×1080
m
640×480
Clearer
n 3456×3456
For making postcard-size prints.
Taking Pictures
Recorded Pixels
m
3
For posting on a website or attaching to e-mail.
The default setting is o.
If you select m, 6 or m, the
aspect ratio of the image is 4:3 and
the monitor display for recording and
playback is as shown on the right.
38
1
2
04/04/2012
14:25
Use the four-way controller (23) to select [Recorded
Pixels] in the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the number
of recorded pixels.
Downloaded From camera-usermanual.com
75
Downloaded From camera-usermanual.com
Adjusting the White Balance
You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
F Auto
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Shade
Use this mode when taking pictures outside in the shade.
I
Tungsten Light
Use this mode when taking pictures under electric or other
tungsten light.
J
K
Fluores. Light
Use this mode when taking pictures under fluorescent light.
Manual
Use this mode when adjusting the white balance manually.
• Set another white balance setting if you are not satisfied with the color
balance of pictures taken with the [White Balance] set to F.
• Depending on the selected shooting mode, the white balance setting
may not be changed. Refer to “Functions Available for Each Shooting
Mode” (p.148) for details.
1
2
3
Taking Pictures
G
H
Daylight
Use the four-way controller (23) to select [White
Balance] in the [A Rec. Mode] menu.
Press the four-way controller (5).
The [White Balance] screen appears.
3
Use the four-way controller
(23) to change the setting.
You can check the result of selected
white balance setting on the preview
image each time you press the fourway controller (23).
4
White Balance
Auto
MENU Cancel
OK
OK
Press the 4 button.
The setting is saved.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.83).
Saving the White Balance setting 1p.87
Downloaded From camera-usermanual.com
77
To Set the White Balance Manually
Have a blank sheet of white paper or similar material ready.
1
2
3
3
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
Point the camera at the blank sheet of paper or other
material so that it fills the frame displayed in the center
of the screen.
Press the shutter release button fully.
Taking Pictures
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the [A Rec. Mode] menu reappears.
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 64 - 800)
64
The lower the sensitivity, the less noise that affects the image. The
100
shutter speed will be slower in low light conditions.
200
400
800
1600
Higher sensitivity settings use faster shutter speeds in low light
3200
conditions to reduce camera shake, but the image may be affected by
noise.
6400
1
2
3
Use the four-way controller (23) to select [Sensitivity]
in the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to change the
sensitivity.
Downloaded
From camera-usermanual.com
78
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Setting the Color Saturation (Saturation)
You can set the color saturation.
1
2
Use the four-way controller (23) to select [Saturation]
in the [A Rec. Mode] menu.
Use the four-way controller (45) to change the
saturation level.
Low
Normal
High
Setting the Image Contrast (Contrast)
You can set the image contrast level.
1
2
Use the four-way controller (23) to select [Contrast] in
the [A Rec. Mode] menu.
3
Taking Pictures
F
G
H
Use the four-way controller (45) to change the
contrast level.
F
G
H
Low
Normal
High
Setting the Date Imprint Function
You can choose whether to imprint the date and/or time when taking still
pictures.
1
2
Use the four-way controller (23) to select [Date
Imprint] in the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
Downloaded From camera-usermanual.com
81
3
Use the four-way controller (23) to select the Date
Imprint details.
Choose from [Date], [Date & Time], [Time] or [Off].
4
Press the 4 button.
The setting is saved.
3
• The date and/or time imprinted cannot be deleted.
• Note that if the printer or the image editing software is set to print the
date and the images to be printed already have the date and/or time
imprinted, the imprinted dates and/or times may overlap.
Taking Pictures
• O appears on the display in A mode when [Date Imprint] is set.
• The date and/or time are imprinted on the picture in the format set in
the [Date Adjustment] screen (p.40).
Calling Up a Specific Function
You can assign a function to the Green button and recall it quickly by
simply pressing the Green button. This is useful to save time to get to the
frequently used function.
The following functions can be assigned to the Green button:
• 9 (Green) Mode
• White Balance
• Sensitivity
• EV Compensation
• The Green button setting can be returned to its default value by
selecting [Reset] on the [W Setting] menu.
• The functions other than the 9 (Green) mode can be set in the usual
manner on the [A Rec. Mode] menu.
• Although you can approach a function by assigning it to the Green
button or selecting it from the [A Rec. Mode] menu, you cannot save
different settings for each case.
Downloaded
From camera-usermanual.com
82
To Assign a Function to the Green Button
1
2
Use the four-way controller (23) to select [Green
Button] in the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
3
Press the 3 button.
The selected function is assigned to the Green button.
To Use the Green Button
1
Press the Green button in A mode.
The function assigned to the Green button is called up.
2
Use the four-way controller
(45) to change the setting
and press the 4 button.
EV Compensation
3
Taking Pictures
4
Use the four-way controller (23) to select a function
you want to assign, and press the 4 button.
0.0
The camera returns to capture
status.
Taking Pictures in Basic Mode (Green Mode) 1p.61
When a function other than the 9 (Green) mode is assigned to the
Green button, the camera returns to the original screen if no operation is
performed for one minute after the Green button is pressed.
Downloaded From camera-usermanual.com
83
Recording Movies
Recording a Movie
This mode enables you to record movies. Sound is recorded at the same
time.
Shutter release
button
3
Zoom button
Taking Pictures
Movie button
Four-way controller
4 button
1
Point the camera at your subject in A mode.
When the camera detects a person’s face, the Face Detection function
is activated and the face detection frame appears (p.59). (The frame
disappears when recording starts.)
2
Press the Movie button.
The camera automatically focuses on the subject and compensates
the exposure. Recording starts.
You can continue recording until the built-in memory or the SD
Memory Card is full, or the size of the recorded movie reaches 2 GB.
The following information appears
on the display.
1 Movie mode
2 Movie SR setting
3 Remaining recordable time
4 Recording (blinks)
1
You can change the captured area 2
01:39:17
by pressing the zoom button.
3
4
Right (T)
Enlarges the
subject.
Left (W) Widens the area that is captured by the camera.
Downloaded
From camera-usermanual.com
84
3
Press the Movie button.
Recording stops.
Playing Back a Movie 1p.90
• The flash does not discharge while recording a movie.
• The autofocus system does not operate while recording a movie.
• You can use optical zoom only before recording, while digital zoom is
available both before and during recording.
• Recording does not start while a menu screen is being displayed or in
playback mode even if the Movie button is pressed.
If you keep the Movie button pressed for more than one second,
recording will continue as long as you keep the button pressed. Shooting
stops when you take your finger off the Movie button.
Taking Pictures
Keeping the Movie Button Pressed
3
Setting the [C Movie] Menu
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller (5) or zoom button
towards the right (T).
The [C Movie] menu appears.
3
4
Use the four-way controller (23) to select an item and
change its setting.
Press the 3 button after changing the setting.
The A mode screen reappears. The setting is saved and the camera
returns to capture status.
Downloaded From camera-usermanual.com
85
Selecting the Recorded Pixels for Movies
You can choose from the following recorded pixels settings for movies.
The more pixels there are, the clearer the details and the bigger the file
size.
Setting
Recorded
Pixels
Frame
Rate
M
1280×720
30 fps
G
640×480
30 fps
3
Use
Records images in HDTV format (16:9). Movement is
recorded smoothly. (default setting)
Suitable for viewing on a TV or computer screen.
Movement is recorded smoothly.
Taking Pictures
* The frame rate (fps) indicates the number of frames per second.
1
2
Use the four-way controller (23) to select [Recorded
Pixels] in the [C Movie] menu.
Press the four-way controller (5).
A pull-down menu appears.
3
4
Use the four-way controller (23) to select the number
of recorded pixels.
Press the 4 button.
The setting is saved.
Setting the Movie SR (Movie Shake Reduction)
Function
You can correct camera shake while you are recording a movie with the
Movie SR (Movie Shake Reduction) function.
1
2
Use the four-way controller (23) to select [Movie SR]
in the [C Movie] menu.
Use the four-way controller (45) to select O or P.
O
P
Corrects camera shake.
Does not correct camera shake.
Downloaded
From camera-usermanual.com
86
Downloaded From camera-usermanual.com
1
2
Use the four-way controller (23) to select [Memory] in
the [A Rec. Mode] menu.
Press the four-way controller (5).
The [Memory] screen appears.
3
4
Use the four-way controller (23) to choose an item.
Use the four-way controller (45) to select O or P.
3
Taking Pictures
Downloaded
From camera-usermanual.com
88
Playing Back Images
Playin
g Back
and
Deletin
g
Image
s
Zoom button
Q button
Four-way controller
4 button
Green/i button
3 button
4
1
Press the Q button after
taking a picture.
File number
100- 0038
The camera enters the Q mode and
the captured image appears on the
display (single-image display).
Edit
2
04/04/2012
14:25
Press the four-way controller (45).
The previous or next image appears.
To Delete the Displayed Image
Press the i button while the image is
displayed to display the Delete screen.
Press the four-way controller (2) to
select [Delete] and press the 4 button.
Playing Back and Deleting Images
Playing Back Still Pictures
100-0017
Delete
Cancel
OK
OK
For information on other deletion procedures 1p.98
Downloaded From camera-usermanual.com
89
Playing Back a Movie
You can play back the movies you have taken. Recorded sound is
played back at the same time.
1
2
In Q mode, use the four-way controller (45) to
choose the movie you want to play back.
Press the four-way controller
(2).
100- 0017
00:30
Playback starts.
4
Edit
04/04/2012
14:25
Playing Back and Deleting Images
Available operations during
playback
Zoom button towards the right (y)
Zoom button towards the left (f)
Four-way controller (2)
Four-way controller (5)
Four-way controller (4)
Increases the volume.
Reduces the volume.
Pauses playback.
Fast-forwards playback while the button is held down.
Plays back in reverse.
Fast-reverses playback while the button is held down.
Available operations while playback is paused
Four-way controller (2)
Four-way controller (5)
Four-way controller (4)
3
Resumes playback.
Forwards the frame.
Reverses the frame.
Press the four-way controller (3).
Playback stops.
Downloaded
From camera-usermanual.com
90
Multi-Image Display
Six-Image Display/Twelve-Image Display
You can display six or twelve thumbnails of images at a time.
1
In Q mode, press the zoom button towards the left
(f).
The six-image display appears
showing with six thumbnails. Press
the zoom button towards the left (f)
again to switch to twelve-image
display.
Six or twelve images appear page by
page.
2
Select & Delete
100-0010
Six-Image Display
Breakpoint of folders
Frame
1
2
Select & Delete
100-0010
Twelve-Image Display
The icons that appear on the images indicate the following:
(No icon)
C
Still picture
Movie (the first frame appears)
4
Playing Back and Deleting Images
Use the four-way controller
(2345) to move the frame. If there
are too many images to display on
one page, pressing the four-way
controller (24) while the image 1 is
selected will display the previous
page. Similarly, if you choose the
image 2 and press the four-way
controller (35), the next page
appears.
1
Press the 4 button to switch to single-image display of the selected
image.
Press the Q button to switch to A mode.
Downloaded From camera-usermanual.com
91
Folder Display/Calendar Display
In twelve-image display, press the zoom button towards the left (f) to
switch to folder display or calendar display. Press the Green button to
switch between folder display and calendar display.
1
In Q mode, press the zoom button towards the left (f)
three times.
The screen changes to folder display or calendar display.
Folder display
The folder list with recorded images
appears on the screen display.
4
Playing Back and Deleting Images
Four-way
controller
(2345)
Zoom button
towards the right
(y)/4 button
3 button
Moves the frame.
Frame
100
101
Displays the images in
the selected folder in
twelve-image display.
100-0707
Returns to twelveimage display.
Images are displayed by date in
calendar format.
A thumbnail of the first image
recorded on each date is displayed
on the calendar.
4 button
3 button
103
104
Calendar display
Four-way
controller
(2345)
Zoom button
towards the right
(y)
102
Moves the frame.
Frame
SUN
MON
TUE
WED
THU
FRI
SAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
04
2012
Displays the images
recorded on the
selected date in
twelve-image display.
Displays the first
image recorded on
the selected date in
single-image display.
Returns to twelveimage display.
Downloaded
From camera-usermanual.com
92
Using the Playback Functions
1
Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to choose a
playback mode.
The guide for the selected function
appears below.
For continuously playing
back images. Screen or
sound effects can be set
MENU Cancel
3
1/2
Slideshow
OK
OK
Press the 4 button.
4
The selected playback function is called up.
Page
Slideshow
p.94
Movie Editing
Description
For continuously playing back images. Screen or
u
sound effects can be set.
Rotates captured images. Useful when viewing
s Image Rotation
vertical images on a TV.
Reduces the size of faces in the image, for wellk Small Face Filter proportioned portraits.
Processes the subjects in the images to look like
o Miniature Filter
miniature objects.
Processes image into HDR-like image.
p HDR Filter
For modifying images with a Color filter or Soft
P Digital Filter
filter.
For composing an image with a frame. Select
Frame
Composite
N
Overwrite or Save as to save.
[
Playback Mode
p.96
p.107
p.108
p.108
p.110
Playing Back and Deleting Images
Playback Mode Palette
p.113
Save as Still For saving one frame from a movie as a still
Image
picture.
p.116
Divide
Movies
Red-eye
Z Compensation
For dividing a movie into two or more segments.
For compensating red-eye. May not work due to
the condition of the image.
Downloaded From camera-usermanual.com
p.112
93
Downloaded From camera-usermanual.com
To Set the Slideshow Conditions
You can set the playback interval and also a screen effect and sound
effect for when one image changes to the next.
1
2
Use the four-way controller (23) to select [Interval] in
Step 4 on p.94.
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the interval
and press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.] or [30sec.].
5
Use the four-way controller (23) to select [Screen
Effect].
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23) to choose the screen
effect and press the 4 button.
Wipe
Checker
Fade
Random
Off
7
8
The next image slides over the previous one from left to right
The next image appears in small square mosaic blocks
The current image gradually fades out and the next image fades in
Various effects are used randomly
No effect
Use the four-way controller (23) to select [Sound Effect].
4
Playing Back and Deleting Images
4
Use the four-way controller (45) to select O or P.
Except when the [Screen Effect] is set to [Off], you can choose O (On)
or P (Off) for the sound that is played when one image changes to the
next.
9
Use the four-way controller (23) to select [Start] and
press the 4 button.
The slideshow starts using the selected interval and effect.
Downloaded From camera-usermanual.com
95
• The slideshow will continue until you press any button other than the
4 button.
• Movies will be played through to the end before the next picture is
played back, regardless of the interval setting. However, pressing the
four-way controller (5) while playing back a movie skips to the next
image.
• When [Random] is selected for the screen effect, the interval is fixed
and the sound effect is set to off.
Connecting the Camera to AV Equipment 1p.103
Rotating an Image
4
1
Press the Q button after taking a picture.
Playing Back and Deleting Images
The image appears on the display.
2
3
Use the four-way controller (2345) to select s
(Image Rotation) from the Playback Mode Palette.
Press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
4
Use the four-way controller
(2345) to choose the
rotation direction and press
the 4 button.
The rotated image is saved.
MENU Cancel
OK
OK
• Movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated
state.
Downloaded
From camera-usermanual.com
96
Zoom Playback
You can magnify an image up to ten times.
1
2
In Q mode, use the four-way controller (45) to
choose the image you want to magnify.
Press the zoom button towards the right (y).
The image is magnified (×1.1 to ×10). Continuing to press the zoom
button towards the right (y) changes the magnification continuously.
You can use the guide mark “+” that
appears at the bottom left of the
screen to check which portion of the
image is magnified.
2.0×
4
Four-way controller
(2345)
Zoom button
towards the right
(y)
Zoom button
towards the left (f)
3
Moves the position
to be magnified.
Guide
Makes the image
bigger (max. ×10).
Makes the image
smaller (min. ×1.1).
Press the 4 button.
The image returns to single-image display.
Movies cannot be magnified.
Downloaded From camera-usermanual.com
Playing Back and Deleting Images
Available operations while an
image is magnified
97
Deleting Images
You can delete images that you do not want to keep.
Deleting a Single Image
You can delete a single image.
Protected images cannot be deleted (p.100).
1
4
Playing Back and Deleting Images
2
In Q mode, use the four-way controller (45) to
choose the image you want to delete.
Press the i button.
A confirmation dialog appears.
3
Use the four-way controller
(23) to select [Delete].
100-0017
Delete
Cancel
OK
4
OK
Press the 4 button.
The image is deleted.
Deleting Selected Images
You can delete several images selected from the six-/twelve-image
display at once.
Protected images cannot be deleted (p.100).
1
In Q mode, press the zoom button towards the left (f)
once or twice.
Six-image display or twelve-image display appears.
Downloaded
From camera-usermanual.com
98
2
Press the i button.
P appears on the images.
Select & Delete
3
100-0010
Use the four-way controller
(2345) to choose the
images that you want to
delete, then press the 4
button.
4
Press the i button.
A confirmation dialog appears.
5
6
Use the four-way controller (23) to select [Select &
Delete].
Press the 4 button.
The selected images are deleted.
4
Playing Back and Deleting Images
OK
MENU Cancel
Delete
O appears on the selected images.
If you select an image and press the
zoom button towards the right (y), the selected image appears in
single-image display as long as the button is pressed, enabling you to
check whether you really want to delete it or not. (The display returns
to six-/twelve-image display when you release the button.) However,
protected images cannot be displayed in single-image display.
Deleting All Images
You can delete all the images at once.
Protected images cannot be deleted (p.100).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
Downloaded From camera-usermanual.com
99
2
3
Use the four-way controller (23) to select [Delete All].
Press the four-way controller (5).
The [Delete All] screen appears.
4
5
Use the four-way controller (23) to select [Delete All].
Press the 4 button.
All the images are deleted.
Protecting Images from Deletion (Protect)
You can protect stored images from being accidentally deleted.
4
1
Playing Back and Deleting Images
2
3
In Q mode, use the four-way controller (45) to
choose the image you want to protect.
Use the four-way controller (2345) to select Z
(Protect) from the Playback Mode Palette.
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
4
Use the four-way controller
(23) to select [Single
Image].
Single Image
All Images
Cancel
OK
5
OK
Press the 4 button.
The message [Protects this image] appears.
To protect another image, use the four-way controller (45) to select
the image.
Downloaded From camera-usermanual.com
100
6
Use the four-way controller
(23) to select [Protect].
100-0017
Protects this image
Protect
Unprotect
Cancel
OK
7
OK
Press the 4 button.
The selected image is protected and the screen shown in Step 4
reappears.
To protect other images, repeat Steps 4 to 7.
Select [Cancel] to exit the Protect setting.
4
To Protect All Images
1
Select [All Images] in Step 4
on p.100.
Single Image
All Images
Cancel
OK
2
3
OK
Press the 4 button.
Use the four-way controller
(23) to select [Protect].
Playing Back and Deleting Images
• To cancel the protection of the image, select [Unprotect] in Step 6.
• Y appears on the protected images during playback.
100-0017
Protects all images
Protect
Unprotect
Cancel
OK
Downloaded From camera-usermanual.com
OK
101
Downloaded From camera-usermanual.com
Connecting the Camera to AV
Equipment
By using the optional AV cable (I-AVC116), you can capture and play
back images on equipment with a video input terminal, such as a TV.
PC/AV terminal
External input
terminal
AUDIO
VIDEO (L)
(R)
1
2
3
White
Turn the AV equipment and camera off.
Face the } mark on the AV cable towards the 4 mark
on the camera, and connect the cable to the PC/AV
terminal.
Connect the other ends of the AV cable to the video
input terminal and audio input terminal of the AV
equipment.
4
Playing Back and Deleting Images
Yellow
When using stereo sound equipment, insert the sound terminal into the
L (white) terminal.
4
Turn the AV equipment on.
When the equipment that the camera is connected to and the equipment
that plays back images are different, turn both on.
When viewing images on AV equipment with multiple video input
terminals (such as a TV), refer to the operation manual of the
equipment and select the video input terminal to which the camera is
connected.
Downloaded From camera-usermanual.com
103
Downloaded From camera-usermanual.com
Editing Images
Editing
and
Printin
g
Image
s
Changing the Image Size (Resize)
By changing the recorded pixels of a selected image, you can make the
file size smaller than the original. You can use this function to continue
taking pictures when the SD Memory Card or the built-in memory is full,
by making the images smaller and overwriting the original images to
make more space available.
• Images taken with the recorded pixels of n/h/m and movies
cannot be resized.
• You cannot select a larger resolution than that of the original image.
1
3
5
Use the four-way controller (2345) to select n
(Resize) from the Playback Mode Palette.
Editing and Printing Images
2
In Q mode, use the four-way controller (45) to
choose the image you want to resize.
Press the 4 button.
The screen for choosing the number of recorded pixels appears.
4
Use the four-way controller
(45) to select the number of
recorded pixels.
Recorded Pixels
MENU Cancel
5
h
OK
OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
6
Use the four-way controller (23) to select [Overwrite]
or [Save as].
Downloaded From camera-usermanual.com
105
Downloaded From camera-usermanual.com
5
Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to
the size of the cropped image.
Processing Images to Make a Face Look Smaller
Images are processed to reduce the size of a person’s face detected
with the Face Detection function (p.59) when taking pictures so that the
face looks smaller.
1
2
Use the four-way controller (2345) to select k
(Small Face Filter) from the Playback Mode Palette.
5
Press the 4 button.
After a face detection frame for a face that can be corrected is
displayed, the correction screen appears.
4
Use the four-way controller
(45) to change the
reduction ratio.
F
G
H
5
Approx. 5 %
Approx. 7 %
Approx. 10 %
MENU Cancel
OK
OK
Press the 4 button.
Editing and Printing Images
3
In Q mode, use the four-way controller (45) to
choose the image you want to edit.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
6
7
Use the four-way controller (23) to select [Overwrite]
or [Save as].
Press the 4 button.
The camera returns to Q mode and the processed image is displayed.
Downloaded From camera-usermanual.com
107
You may not be able to process images in the following situations:
- When the size of face taken in relation to an image is too large or
too small
- When a face is not in the center of an image
Processing Images with the Miniature/HDR Filter
This function lets you perform special processing on the selected image.
o Miniature Filter
p HDR Filter
Processes the subjects in the images to look like miniature
objects.
The processed image will be saved with the recorded pixels
of f for the 4:3 aspect ratio, and 1 for the 16:9
aspect ratio.
Images of size f or smaller with the 4:3 aspect ratio, and
1 or smaller with the 16:9 aspect ratio, cannot be
processed.
Processes image into HDR-like image.
5
Editing and Printing Images
Movies and images taken with another camera cannot be processed
using the Miniature/HDR Filter function.
1
2
3
In Q mode, use the four-way controller (45) to
choose the image you want to edit.
Use the four-way controller (2345) to select o
(Miniature) or p (HDR) from the Playback Mode
Palette.
Press the 4 button.
When the o mode is selected, the screen for selecting the area to
be blurred is displayed.
When the p mode is selected, proceed to Step 6.
Downloaded From camera-usermanual.com
108
4
Use the four-way controller
(45) to select an option.
Processes the image so that the
top of the image is blurred as if
only the bottom of the image is in
focus.
Processes the image so that the
top and bottom of the image is
blurred as if only the center of the
image is in focus.
Processes the image so that the
bottom of the image is blurred as
if only the top of the image is in
focus.
5
MENU Cancel
OK
OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
7
Use the four-way controller (23) to select [Overwrite]
or [Save as].
Press the 4 button.
The camera returns to Q mode and the processed image is displayed.
Downloaded From camera-usermanual.com
Editing and Printing Images
6
5
109
Processing Images with the Digital Filters
This function lets you change the color tones and perform special
processing on the selected image.
B&W
Processes the image into one that has the look of a black and white
photograph.
Sepia
Processes the image into one that has the look of a sepia photograph.
Toy Camera
Processes the image that looks as though it was shot with a toy
camera.
Retro
Processes the image into one that has the look of an old photo.
Processes the image using the selected color filter. You can choose
from six filters: red, pink, purple, blue, green, and yellow.
Extracts only a specific color and processes the rest of the image
into black and white. You can choose from three filters: red, green,
Extract Color
and blue.
There are four filters: Sky Blue/Fresh Green/Delicate Pink/Autumn
Color Emphasis Leaves.
Color
5
Editing and Printing Images
Soft
Processes the image into one that appears soft overall.
Brightness
Adjusts the brightness of the image.
Movies and images taken with another camera cannot be processed
using the Digital Filter function.
1
2
3
In Q mode, use the four-way controller (45) to
choose the image you want to edit.
Use the four-way controller (2345) to select P
(Digital Filter) from the Playback Mode Palette.
Press the 4 button.
The filter selection screen appears.
1 B&W
2 Sepia
3 Toy Camera
4 Retro
5 Color
6 Extract Color
7 Color Emphasis
8 Soft
9 Brightness
B&W
3
5
7
9
MENU Cancel
Subsequent steps vary depending on your selection.
Downloaded From camera-usermanual.com
110
1
2
4
6
8
OK
OK
Downloaded From camera-usermanual.com
To Select a Toy Camera or Brightness Filter
4
Use the four-way controller (23) to choose a filter.
The preview image of the result of the filter effect appears.
5
Use the four-way controller (45) to adjust the effect.
Toy Camera
Brightness
6
Four-way controller
(4)
Weak
Dark
Default Setting
Standard
Standard
Four-way controller
(5)
Strong
Bright
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
5
7
Editing and Printing Images
8
Use the four-way controller (23) to select [Overwrite]
or [Save as].
Press the 4 button.
The image processed with the filter is saved.
Compensating for an Unwanted Red-eye Effect
You can correct images where the flash has caused the subject to
appear with red eyes.
The red-eye compensation function can only be used with still pictures
taken with this camera. The red-eye compensation function cannot be
used on movies and on images where red eyes cannot be detected on
the camera.
1
2
In Q mode, use the four-way controller (45) to
choose the image you want to correct.
Use the four-way controller (2345) to select Z (Redeye Compensation) from the Playback Mode Palette.
Downloaded From camera-usermanual.com
112
3
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
4
5
Use the four-way controller (23) to select [Overwrite]
or [Save as].
Press the 4 button.
The processed image is saved.
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are
three frames already stored in the camera.
1
2
3
In Q mode, use the four-way controller (45) to
choose the image to which you want to add a frame.
Use the four-way controller (2345) to select N
(Frame Composite) from the Playback Mode Palette.
Press the 4 button.
The 12-frame display of the frame selection screen appears.
4
5
Editing and Printing Images
The Frame Composite function cannot be used on images taken with the
recorded pixels of n/h, images of size h or smaller with the
4:3 aspect ratio, images of size h or smaller with the 16:9 aspect
ratio, and movies.
Use the four-way controller
(2345) to choose a frame.
OK
Downloaded From camera-usermanual.com
OK
113
Downloaded From camera-usermanual.com
Optional Frames
In addition to the built-in frames that come with this camera, there are optional
frames included on the supplied CD-ROM. You can save the optional frames to
the camera’s built-in memory or an SD Memory Card. To save them to the builtin memory, first remove the SD Memory Card before proceeding.
To Copy Frames
1
2
6
Refer to “Connecting to a Computer” (p.137) for instructions on
connecting the camera to a computer.
When the device detection window opens, click
[Cancel].
Insert the CD-ROM into the CD/DVD drive.
When the installer window opens, click [EXIT].
Copy the desired files from the FRAME folder in the
root directory of the CD-ROM to the FRAME folder on
the camera (removable disk).
For information on working with files on a computer, refer to the
instruction manual supplied with the computer.
Disconnect the USB cable from the computer and
camera.
Refer to “Connecting to a Computer” (p.137) for instructions on
disconnecting the cable.
• Frames can be stored both in the built-in memory and on an SD
Memory Card, but using large numbers of frames may slow down
processing speed.
Downloaded From camera-usermanual.com
5
Editing and Printing Images
3
4
5
Connect the camera to a computer using the provided
USB cable.
115
To Use a New Frame
Frames downloaded from the PENTAX website or other source can be
used for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the
built-in memory or on the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to the PENTAX website.
• Up to a total of 90 frames including the three default frames can be
stored, but using large numbers of frames may slow down processing
speed.
Editing Movies
5
You can extract a frame from the recorded movie to save as a still picture
or divide a movie into two or more segments.
Editing and Printing Images
1
2
3
In Q mode, use the four-way controller (45) to
choose the movie you want to edit.
Use the four-way controller (2345) to select [
(Movie Editing) from the Playback Mode Palette.
Press the 4 button.
The movie editing selection screen
appears.
Subsequent steps vary depending on
your selection.
Save as Still Image
Divide Movies
Cancel
OK
OK
To Save a Frame from a Movie as a Still Picture
4
5
Select [Save as Still Image] on the movie editing
selection screen.
Press the 4 button.
The screen appears for selecting a frame to be saved as a still picture.
Downloaded From camera-usermanual.com
116
Downloaded From camera-usermanual.com
8
Use the four-way controller
(23) to select [Divide].
Divide at this position?
Divide
Cancel
OK
9
OK
Press the 4 button.
The movie is divided at the specified position, each segment is saved
as a new file, and the original movie is deleted.
Protected movies cannot be divided.
5
Copying Images
Editing and Printing Images
You can copy images from the built-in memory to the SD Memory Card
and vice versa. This function can be selected only when an SD Memory
Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
1
2
Use the four-way controller (2345) to select p
(Image Copy) from the Playback Mode Palette.
Press the 4 button.
The copying method selection screen appears.
Subsequent steps vary depending on your selection.
To Copy Files from the Built-in Memory to the SD Memory Card
All the images in the built-in memory are copied to the SD Memory Card
at once. Before copying the images, make sure that there is enough
space on the SD Memory Card.
Downloaded From camera-usermanual.com
118
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
3
Use the four-way controller
(23) to select [Single
Image].
Single Image
All Images
Cancel
OK
4
OK
Press the 4 button.
The message [Applies DPOF settings to this image] appears.
5
Use the four-way controller (45) to select an image.
If DPOF settings have already been made for the selected image, the
previous number of copies and date setting (O or P) will be displayed.
6
Use the four-way controller
(23) to choose the number
of copies.
100- 0017
Applies DPOF settings
to this image
Date
MENU Cancel
7
Press the Green button to
switch O or P for [Date]
setting.
O
P
The date will be imprinted.
The date will not be
imprinted.
OK
OK
100- 0017
Applies DPOF settings
to this image
Copies
Date
01
Date
MENU Cancel
OK
OK
To continue setting the DPOF print
order data, repeat Steps 5 to 7.
8
Editing and Printing Images
Copies
Date
5
00
Press the 4 button.
The settings are saved and the screen shown in Step 3 reappears.
Depending on the printer or printing equipment at the photo processing
lab, the date may not be imprinted on the pictures even if O (On) is
selected for [Date] in DPOF setting.
Downloaded From camera-usermanual.com
121
To cancel DPOF settings, set the number of copies to [00] in Step 6 and
press the 4 button.
Printing All Images
DPOF settings are applied to all the images stored in the camera.
1
2
Select [All Images] in Step 3 on p.121.
Press the 4 button.
The message [Applies DPOF settings to all images] appears.
3
Choose the number of copies
and switch O or P for [Date]
setting.
Refer to Steps 6 and 7 in “Printing a
Single Image” (p.121) for details on
how to make the settings.
5
Editing and Printing Images
4
100- 0017
Applies DPOF settings
to all images
Copies
Date
01
Date
MENU Cancel
OK
OK
Press the 4 button.
The settings specified for all the images are saved and the DPOF
setting method selection screen reappears.
• The number of copies specified in the [All Images] setting applies to all
the images. Before printing, check that the number is correct.
• DPOF settings specified for single images are canceled when settings
are made with [All Images].
Downloaded From camera-usermanual.com
122
Downloaded From camera-usermanual.com
1
2
Use the four-way controller (23) to select [Format] in
the [W Setting] menu.
Press the four-way controller (5).
The [Format] screen appears.
3
Use the four-way controller
(23) to select [Format].
Format
All data will be deleted
Format
Cancel
OK
4
OK
Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to Q mode.
Changing the Sound Settings
6
Settings
You can adjust the volume of operation sounds and change the type of
sound.
1
2
Use the four-way controller (23) to select [Sound] in
the [W Setting] menu.
Press the four-way controller
(5).
The [Sound] screen appears.
Subsequent steps vary depending on
your selection.
Sound
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
Off
1
1
1
MENU
To Change the Operation Volume/Playback Volume
3
Use the four-way controller (23) to select [Operation
Volume].
Downloaded From camera-usermanual.com
124
4
Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound,
operation sound, and self-timer sound.
5
Change [Playback Volume] in the same way as in Steps
3 and 4.
To Change the Sound Type
3
4
Use the four-way controller (23) to select [Start-up
Sound].
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to select the sound type.
Choose from [1], [2], [3] or [Off].
6
7
Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in Steps 3 to 6.
Press the 3 button twice.
The camera returns to Q mode.
6
Settings
8
Press the 4 button.
Changing the Date and Time
You can change the initial date and time settings (p.40). Also, you can
change the format in which the date appears on the camera.
1
2
Use the four-way controller (23) to select [Date
Adjustment] in the [W Setting] menu.
Press the four-way controller (5).
The [Date Adjustment] screen appears.
Downloaded From camera-usermanual.com
125
3
Press the four-way controller
(5).
The frame moves to [mm/dd/yy].
Depending on the initial setting or
previous setting, [dd/mm/yy] or [yy/
mm/dd] may be displayed.
4
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2012
Time
00:00
Settings complete
MENU Cancel
Use the four-way controller (23) to choose the date
format.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
5
Press the four-way controller (5).
The frame moves to [24h].
6
7
Use the four-way controller (23) to select [24h] (24hour display) or [12h] (12-hour display).
Press the four-way controller (5).
The frame returns to [Date Format].
6
8
Press the four-way controller (3).
Settings
The frame moves to [Date].
9
Press the four-way controller (5).
The frame moves to one of the following items depending on the date
format set in Step 4.
Month for [mm/dd/yy]
Day for [dd/mm/yy]
Year for [yy/mm/dd]
The following operations use [mm/dd/yy] as an example. The
operations are the same even if another date format has been
selected.
10
11
Use the four-way controller (23) to change the month.
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to
change the day. After changing the day, change the year in the same
manner.
Downloaded From camera-usermanual.com
126
12
Change the time in the same way as in Steps 7 to 11.
If you select [12h] in Step 6, the camera automatically switches the
display between am and pm corresponding to the time.
13
14
Press the four-way controller (3) to select [Settings
complete].
Press the 4 button.
The date and time settings are saved.
When you press the 4 button in Step 14, the camera clock is reset to
0 seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 0 seconds.
Setting the World Time
To Set the Destination
1
2
6
Settings
The date and time selected in “Setting the Date and Time” (p.40) and
“Changing the Date and Time” (p.125) serve as the Hometown date and
time. If you set the Destination city using the World Time function, you
can display the Destination date and time when taking pictures in a
different time zone.
Use the four-way controller (23) to select [World Time]
in the [W Setting] menu.
Press the four-way controller (5).
The [World Time] screen appears.
3
Use the four-way controller
(23) to select [X
Destination].
World Time
Select Time
Destination
New York
Hometown
New York
DST
OFF
14:25
DST
OFF
14:25
MENU
Downloaded From camera-usermanual.com
127
4
Press the four-way controller (5).
The [X Destination] screen appears. The city that is currently selected
blinks on the map.
5
Use the four-way controller
(45) to change the
Destination city.
The current time, location and time
difference of the selected city appear.
Destination
City
DST
MENU Cancel
6
7
14:25
New York
TimeDif. +0:00
OK OK
Use the four-way controller (23) to select [DST].
Use the four-way controller (45) to select O (On) or P
(Off).
Select O if the Destination city uses daylight saving time.
8
Press the 4 button.
The settings are saved and the [World Time] screen reappears.
6
9
Press the 3 button twice.
Settings
The camera returns to Q mode.
Select [W Hometown] in Step 3 to set the city and DST setting for the
Hometown city.
To Display the Time of the Destination (Select Time)
1
2
Use the four-way controller (23) to select [World Time]
in the [W Setting] menu.
Press the four-way controller (5).
The [World Time] screen appears.
Downloaded From camera-usermanual.com
128
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the
wallpaper type.
Choose from [1], [2], [3], [USER] or [Off].
4
Press the 4 button.
When [1], [2], [3] or [Off] is selected:
The setting is saved.
When [USER] is selected:
Use the four-way controller (45)
to select the wallpaper image.
After the selection, press the 4
button to save the setting.
100- 0017
MENU Cancel
OK
OK
Adjusting the Brightness of the Display
You can adjust the brightness of the display.
6
Settings
1
2
Use the four-way controller (23) to select [Brightness
Level] in the [W Setting] menu.
Use the four-way controller (45) to adjust the
brightness.
F
G
H
3
Dark
Normal
Bright
Press the 3 button.
The camera returns to Q mode.
The display appears with the set brightness.
Downloaded From camera-usermanual.com
132
Using the Power Saving Function
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness if any button is pressed.
1
2
Use the four-way controller (23) to select [Power
Saving] in the [W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the time
until the camera enters the power saving mode.
Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].
4
Press the 4 button.
The setting is saved.
6
Settings
• Power Saving does not function in the following situations:
- While taking pictures in j (Continuous Shooting) or q (Burst
Shooting) mode
- In playback mode
- While recording a movie
- While the camera is connected to a computer
- While a menu is being displayed
• When no operation is performed after the camera is turned on, the
Power Saving function is activated only after 15 seconds elapse even
if [5sec.] is set.
Setting the Auto Power Off Function
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Use the four-way controller (23) to select [Auto Power
Off] in the [W Setting] menu.
Downloaded From camera-usermanual.com
133
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Connecting to a Computer
Conne
cting
to a
Comp
uter
Setting the USB Connection Mode
Set the device to which the camera is connected with the USB cable.
Make sure to set the USB Connection mode before connecting your
camera to a computer. You cannot perform the following setting if your
camera is connected to a computer with the USB cable.
1
2
3
Turn your camera on.
Use the four-way controller (23) to select [USB
Connection] in the [W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
4
5
Use the four-way controller (23) to select [MSC].
Press the 4 button.
The setting is saved.
MSC and PTP
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital
cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without
installing a device driver.
Downloaded From camera-usermanual.com
Connecting to a Computer
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for
controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class,
you can copy, read, and write files from a computer without installing a
dedicated driver.
7
137
Downloaded From camera-usermanual.com
• The self-timer lamp blinks while the camera is connected to a
computer.
• If there is no SD Memory Card in the camera, the images stored in the
built-in memory can be viewed with a computer.
• For information on system requirements, refer to p.140.
Disconnecting the Camera from the Computer
When the camera is being used by an application such as
MediaImpression, it cannot be disconnected until the application is
closed.
Windows
1
2
Click the
[Safely Remove Hardware] icon in the task
bar located at the bottom-right corner of the desktop.
Click [Eject (the device
connected)].
The message appears.
3
Disconnect the USB cable from the Windows PC and
your camera.
1
Drag [NO NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name
to the trash.
2
Disconnect the USB cable from the Macintosh and your
camera.
The camera will automatically switch to the playback mode when the
USB cable is disconnected from the camera or the computer.
Downloaded From camera-usermanual.com
Connecting to a Computer
Macintosh
7
139
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
3
4
Click [Computer] in the Start menu.
Double-click the CD/DVD drive icon.
The installation screen appears.
5
6
Click [MediaImpression 3.1 for
PENTAX].
Choose a language in the “Choose Setup Language”
screen and click [OK].
The setup screen appears. Follow the on-screen guidance and install
the software.
7
Select the file format to use
and click [Next].
All files in the checked format will open
with MediaImpression. Remove the
check to open the file using another
application.
7
Connecting to a Computer
8
Click [Finish].
Installation is complete.
9
Click [Exit] on the installation screen.
Remove the CD-ROM and reboot the computer.
Downloaded From camera-usermanual.com
142
Macintosh
1
2
3
4
Turn your Macintosh on.
Insert the provided CD-ROM into the CD/DVD drive.
Double-click the CD-ROM icon.
Double-click the [Pentax Software Installer] icon.
The installation screen appears.
5
Click [MediaImpression 2.1 for
PENTAX].
The setup screen appears. Follow the
on-screen guidance and install the
software.
6
Click [Close].
Installation is complete.
7
Click [Exit] on the installation screen.
The window is closed.
Downloaded From camera-usermanual.com
Connecting to a Computer
7
143
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Using MediaImpression on Macintosh
1
Connect the camera to your Macintosh.
Refer to Steps 2 to 4 on p.138 for details.
2
Double-click the
[MediaImpression 2.1 for
PENTAX] icon in the
[Applications] folder.
MediaImpression 2.1 for PENTAX
starts and the start page appears.
3
Click [Import].
The Import screen appears.
4
7
Select an image to transfer.
Connecting to a Computer
To select multiple images, choose the
images while pressing the Command
key.
To specify the destination location,
click the folder icon.
If any of the “Import Options” are
checked, marks will appear on the
images that were transferred.
Downloaded From camera-usermanual.com
146
5
Click [Import].
The images are transferred to the
computer and the Media Browser
screen appears.
When a message appears after
transfer is complete, click [Done].
• If the images from the camera are not displayed in the Import screen,
select [NO NAME] (or the volume label name) in [Get Media from].
• You can find more information on how to use MediaImpression by
using the help pages. Select [ArcSoft MediaImpression Help] in [Help]
on the menu bar.
7
Connecting to a Computer
Downloaded From camera-usermanual.com
147
Functions Available for Each Shooting
Mode
z: Can be set.
×: Cannot be set.
Shooting Mode
8
Function
Zoom button Zoom operation
, (Auto)
a (Flash Off)
Flash
Mode
b (Flash On)
d (Flash On + Red-eye)
9 (Standard)
g (Self-timer)
Drive
Z (2 sec. Self-timer)
Mode
j (Continuous Shooting)
q (Burst Shooting)
= (Standard)
q (Macro)
Focus Mode r (Super Macro)
3 (Pan Focus)
s (Infinity)
Recorded Pixels
White Balance
Focusing Area
Sensitivity
[A Rec. EV Compensation
Mode] menu Face Detection
Sharpness
Saturation
Contrast
Date Imprint
Appendix
*1
*2
*3
*4
*5
Intelligent Zoom is not available
Only optical zoom is available
Fixed at a (Flash Off)
Fixed at s (Infinity)
Fixed at m
*6
*7
*8
Downloaded From camera-usermanual.com
148
b
R
9
A
Bc
Rd
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
×*9
×*10
z
×*13
z*14
×
×
×
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z*1
z
z
×
×
z
z
z
×
×
z
z
×
z
×
×*5
×*9
×*10
×*11
×*13
×*15
×*17
×*17
×*17
×*18
z
×
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
×*9
z
z
z
z*14
×
×
×
z
Fixed at f for the 4:3 aspect ratio
Fixed at 1 for the 16:9 aspect ratio
In N mode, fixed at h for the 4:3 aspect
ratio and h for the 16:9 aspect ratio
In o mode, fixed at f for the 4:3 aspect
ratio and 1 for the 16:9 aspect ratio
Set in the [C Movie] menu
Appen
dix
Shooting menu items not listed in this chart can be set in any shooting mode except for
Green Mode. However, these settings may not function properly in certain shooting modes
and setting conditions even if they can be selected. For further information, please refer to
the pages listed below.
afK
Shooting Mode
N
p C
b\HB c S
o
KUcQ
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
×*9
z
z
z
z*16
×
×
×
z
z*2 z
z
×
z ×*3
z
×
z
×
z z
z z
z z
z
×
z
×
z
×
z
×
z
×
z
×
z ×*4
×*6 z
z ×*9
z ×*10
×*11 ×*12
z z
z z
z
×
z
×
z
×
z z
z
z
z
z
z
z
z
z
×
×
z
z
z
z
z
×*7
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
×
×
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z*1
×
×*3
×
×
z
z
z
×
×
z
z
z
z
z
z*8
z
z
×*11
z
z
z
z
z
×*18
Zoom operation
, (Auto)
a (Flash Off)
b (Flash On)
d (Flash On + Red-eye)
9 (Standard)
g (Self-timer)
Z (2 sec. Self-timer)
j (Continuous Shooting)
q (Burst Shooting)
= (Standard)
q (Macro)
r (Super Macro)
3 (Pan Focus)
s (Infinity)
Recorded Pixels
White Balance
Focusing Area
Sensitivity
EV Compensation
Face Detection
Sharpness
Saturation
Contrast
Date Imprint
Fixed at F
Fixed at J (Multiple)
Fixed at [Auto]
The sensitivity is fixed at the minimum
value
*13 Fixed at ±0.0
Downloaded From camera-usermanual.com
Flash
Mode
p.70
—
Drive
Mode
p.71
Focus
Mode
p.73
[A Rec.
Mode]
menu
p.75
p.77
p.74
p.78
p.76
p.79
p.80
p.81
p.81
p.81
*14 [Off] is not available
*15 Fixed at [On]
*16 Available only when Color is selected in
c (Text) mode
*17 Fixed at the normal setting
*18 Fixed at [Off]
8
Appendix
*9
*10
*11
*12
Page
Function
Zoom button p.63
149
Messages
Messages such as the following may appear on the display during
camera operation.
Message
8
Appendix
Description
The battery is exhausted. Charge the battery using the
Battery depleted
power adapter D-PA116 (p.31).
The SD Memory Card is full and no more images can be
saved.
Insert a new SD Memory Card or delete unwanted images
Memory card full
(p.34, p.98).
Change the number of recorded pixels of recorded images
and try again (p.105).
Built-in memory full
Displayed if the built-in memory is full when saving a file.
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to display or
Memory card error
copy the images on the card using a computer.
The built-in memory is
The data within the built-in memory is damaged. Format the
not formatted
built-in memory.
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
Card is not formatted
not compatible with this camera. Format the SD Memory
Card in the camera (p.123).
Card is locked
The SD Memory Card is write-protected (p.6).
This message appears when the camera fails to compress
Compression error
an image. Change the number of recorded pixels of the
image and try shooting or saving it again.
There is no image on the SD Memory Card or in the built-in
No image
memory.
This message appears when the internal temperature of the
Movie recording stopped camera has exceeded normal operating limits while
recording a movie.
The camera will turn off The camera turned off because it has overheated. Wait until
to prevent damage from it cools down and then turn it back on.
overheating
Deleting
This message appears while deleting an image.
You are trying to play back an image in a format not
Camera cannot play
supported by this camera. You may be able to play it back
this image and sound
on another brand of camera or on your computer.
Downloaded From camera-usermanual.com
150
Message
Image folder
cannot be created
Protected
Data being recorded
Data being processed
No image to be
processed
This image cannot be
processed
No card in the camera
Available built-in
memory is insufficient to
copy the images
Cannot process
correctly
Not enough battery
power remaining to
activate Pixel Mapping
Description
The largest file number (9999) has been assigned to an
image in the largest folder number (999) and no more
images can be saved. Insert a new SD Memory Card or
format the card/built-in memory (p.123).
The image you are trying to delete is protected (p.100).
Displayed when you try to switch to Q mode while an
image is still being recorded, or when an image is being
saved or a setting is being changed. It disappears after the
image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed when there are no images.
Displayed for files that cannot be processed.
Displayed when no SD Memory Card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Appears during pixel mapping if the battery level is
insufficient. Charge the battery using the power adapter
D-PA116, or replace the battery with a fully charged one.
(p.31)
8
Appendix
Downloaded From camera-usermanual.com
151
Troubleshooting
Problem
Cause
The battery is not
installed
The camera will
not turn on
The battery is
exhausted
The camera is
connected to a
No image appears computer
on the display
The camera is
connected to a TV
The brightness level of
the display is set too
dark
Check if a battery is installed.
Charge the battery.
The display is off when the camera is
connected to a computer.
The display is off when the camera is
connected to a TV.
Adjust the brightness level in [Brightness
Level] in the [W Setting] menu (p.132).
When the Power Saving function is
activated, the display automatically
darkens after a certain amount of time.
Power Saving function Press any button to return to the normal
is activated
brightness level.
Select [Off] in [Power Saving] in the
[W Setting] menu to turn the Power
Saving function off (p.133).
Pictures cannot be taken while the flash
The flash is charging is charging. Wait until charging is
finished.
The shutter will
There is no available
Insert an SD Memory Card with available
not release
space on the SD
space or delete unwanted images (p.34,
Memory Card or in the
p.98).
built-in memory
Recording
Wait until recording is finished.
The subject is too far
The picture is dark
The picture becomes dark if the subject is
away in a dark
when using the
too far away. Take pictures within the
environment, such as
flash
specified flash range.
a night scene
The display is
hard to see
8
Remedy
Appendix
Downloaded From camera-usermanual.com
152
Problem
Cause
The subject is difficult
to focus on with
autofocus
The subject is not
in focus
The subject is not in
the focusing area
Remedy
Lock the focus on an object the same
distance away as the subject (by
pressing and holding the shutter release
button halfway), then aim the camera at
your subject and press the shutter
release button fully (p.56).
Locate the desired subject in the focus
frame (focusing area) in the center of the
display. If it is difficult to do so, first lock
the focus on the desired subject (focus
lock), and then move the camera to
recompose.
The flash mode is set
Set to , (Auto) or b (Flash On) (p.70).
to a
The drive mode is set
The flash does not to j or q
The focus mode is set
discharge
The flash does not discharge in these
to s
The shooting mode is modes.
set to S, or while
recording a movie
Very occasionally, static electricity may cause camera malfunction. In
this case, remove the battery and install it again. If the camera then
works properly, normal condition is restored and you can continue using
the camera.
8
Appendix
Downloaded From camera-usermanual.com
153
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is
turned off.
No : The setting returns to the default setting when the camera is
turned off.
*
: The last memory setting depends on the [Memory] setting
(p.87).
— : N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.136).
No : The setting is saved even after reset.
— : N/A
[A Rec. Mode] Menu Items
Item
8
Appendix
Recorded Pixels
White Balance
Focusing Area
Sensitivity
EV Compensation
Face Detection
Digital Zoom
Default Setting
o (4608×2592)
F (Auto)
J (Multiple)
Auto
±0.0
On
O (On)
Downloaded From camera-usermanual.com
154
Last
Memory
Setting
Yes
*
Yes
*
*
*
*
Reset
Page
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.75
p.77
p.74
p.78
p.76
p.79
p.64
Item
Flash Mode
Drive Mode
Focus Mode
Zoom Position
White Balance
Memory Sensitivity
EV Compensation
Face Detection
Digital Zoom
DISPLAY
File No.
Green Button
Sharpness
Saturation
Contrast
Date Imprint
Default Setting
O (On)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
O (On)
P (Off)
O (On)
Green Mode
G (Normal)
G (Normal)
G (Normal)
Off
Last
Memory
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Page
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.87
p.82
p.80
p.81
p.81
p.81
[C Movie] Menu Items
Item
Recorded Pixels
Movie SR
Default Setting
M (1280×720/30 fps)
O (On)
Last
Memory
Setting
Yes
Yes
Reset
Page
Setting
Yes
Yes
p.86
p.86
8
Appendix
Downloaded From camera-usermanual.com
155
[W Setting] Menu Items
Item
Default Setting
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
8
Appendix
3
3
Off
Sound
1
1
1
According to the initial
Date Format (date)
setting
Date Format (time)
24h
Date
Adjustment Date
1/1/2012
According to the initial
Time
setting
Select Time
W Hometown
According to the initial
Destination (City)
setting
World
Destination (DST)
P (Off)
Time
According to the initial
Hometown (City)
setting
Hometown (DST)
P (Off)
According to the initial
Language/u
setting
Folder Name
Date
USB Connection
MSC
According to the initial
Video Out
setting
Wallpaper
Off
Brightness Level
G (Normal)
Power Saving
5 sec.
Auto Power Off
3 min.
Reset
Cancel
Delete All
Cancel
Pixel Mapping
Cancel
Playback Mode
O (On)
Format
Cancel
Downloaded From camera-usermanual.com
156
Last
Memory
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Page
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
No
p.124
p.40
p.125
p.127
Yes
No
Yes
No
Yes
Yes
Yes
Yes
p.37
p.129
p.130
p.137
Yes
No
p.131
Yes
Yes
Yes
Yes
—
—
—
Yes
—
Yes
Yes
Yes
Yes
—
—
—
Yes
—
p.131
p.132
p.133
p.133
p.136
p.99
p.135
p.136
p.123
Playback Mode Palette Items
Item
Interval
Slideshow Screen Effect
Sound Effect
Image Rotation
Small Face Filter
Default Setting
3 sec.
Wipe
O (On)
Normal
G (approx. 7%)
Miniature Filter
Downloaded From camera-usermanual.com
Reset
Page
Setting
Yes
Yes
Yes
—
No
p.96
p.107
No
No
p.108
—
No
Yes
—
—
—
—
—
Yes
—
—
—
p.108
p.110
p.113
p.112
—
—
p.105
—
—
p.106
—
—
p.118
—
—
—
—
—
—
Yes
—
—
Yes
p.94
p.116
p.100
8
p.120
p.134
Appendix
(Blurring of the top and
bottom)
HDR Filter
—
Digital Filter
B&W
Frame Composite
Default 1
Red-eye Compensation
—
Save as Still Image
—
Movie
Editing
Divide Movies
—
Depending on the
Resize
Recorded Pixels
picture taken
Depending on the
Cropping
picture taken
Built-in memory Image Copy
SD Memory Card
Depending on the
Single Image
recorded image
Protect
Depending on the
All Images
recorded image
Single Image
Copies: 0
DPOF
All Images
Date: P (Off)
Start-up Screen
Off
Last
Memory
Setting
Yes
Yes
Yes
—
No
157
Key Operation
Item
Function
4
5
Operation
Mode
Zoom Position
Drive Mode
Shooting
Mode
Flash Mode
Focus Mode
3 button
Menu Display
4 button
Information
Display
Q button
Zoom button
2
Four-way
controller
3
Default Setting
Last
Memory
Setting
Q mode
—
—
—
Full wide-angle
9 (Standard)
*
*
No
Yes
p.63
p.71
b (Auto Picture)
Yes
Yes
p.57
, (Auto)
= (Standard)
Capture mode:
[A Rec. Mode] menu
Playback mode:
[W Setting] menu
*
*
Yes
Yes
p.70
p.73
—
—
p.47
*
Yes
p.20
Normal
8
Appendix
Downloaded From camera-usermanual.com
158
Reset
Page
Setting
List of World Time Cities
City: indicates cities that can be set as either the Initial Setting (p.37) or the World Time (p.127).
Video Output Format: indicates the video output format of the city set as the initial setting.
Region
North
America
City
Video Output
Format
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
Downloaded From camera-usermanual.com
Region
Africa/
West Asia
East Asia
Oceania
City
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho Chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Video Output
Format
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
8
Appendix
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Central and Mexico City
South
Lima
America
Santiago
Caracas
Buenos Aires
Sao Paulo
Rio de Janeiro
Europe
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Athens
Helsinki
Moscow
Africa/
Dakar
West Asia
Algiers
Johannesburg
159
Optional Accessories
A number of dedicated accessories are available for this camera.
Products marked with an asterisk (*) are the same as those supplied with
the camera.
Power supply
Rechargeable lithium-ion battery D-LI108 (*)
Power adapter D-PA116 (*)
Battery charger D-BC108
Cable
USB cable I-USB116 (*)
AV cable I-AVC116
Strap
O-ST116 (*)
O-ST8
Silver chain strap
O-ST24
Genuine leather strap
O-ST81
Waterproof strap
Camera case
O-CC81
8
Appendix
Downloaded From camera-usermanual.com
160
Downloaded From camera-usermanual.com
Approximate Image Storage Capacity and Recording Time
Still Pictures
2 GB
Built-in Memory
SD Memory Card
13 pictures
640 pictures
m
4608×3456
18 pictures
842 pictures
n 3456×3456
18 pictures
842 pictures
o 4608×2592
25 pictures
1159 pictures
6
3072×2304
72 pictures
3235 pictures
h 1920×1080
243 pictures
10245 pictures
m
640×480
• The image storage capacity is for reference only when images are recorded on
blank built-in memory or SD Memory Card. If movies are recorded, the image
storage capacity is decreased. The actual image storage capacity may vary
depending on the SD Memory Card and the subject.
Movie
Built-in Memory
M 1280×720/30 fps
G 640×480/30 fps
8
15 sec.
30 sec.
2 GB
SD Memory Card
13 min. 27 sec.
25 min. 33 sec.
• The above figures are based on our standard shooting conditions and may vary
depending on the subject, shooting conditions and type of the SD Memory Card
used. If other data such as still images are recorded, recording time becomes
shorter.
• Recording can continue until the built-in memory or the SD Memory Card is full, or
the size of the recorded movie reaches 2 GB (when using a large capacity memory
card). If recording stops at 2 GB, start recording again to continue to record the
movie in blocks of 2 GB.
Appendix
White Balance
Lens
Optical Zoom
Intelligent Zoom
Digital Zoom
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual
Focal Length
5.1 mm - 25.5 mm
(approx. 28 mm - 140 mm in 35 mm equivalent
focal length)
Aperture
F3.9 (W) - F6.3 (T)
Lens Composition 8 elements in 8 groups (5 aspherical elements)
Zoom Type
Electrically driven
5×
Approx. 7.5× at 6, Approx. 36.0× at m (when combined with
optical zoom)
Up to approx. 7.2× (combines with 5× optical zoom to give zoom
magnification equivalent to approx. 36.0×)
Downloaded From camera-usermanual.com
162
Shake Reduction
Display
Playback Modes
Focus Modes
Focus
Exposure Control
Face Detection
Shooting Modes
Movie
Shutter Speed
Downloaded From camera-usermanual.com
8
Appendix
Digital Filters
Still
High-sensitivity anti-shake mode (Digital SR)
Movie
Electronic Movie Shake Reduction (Movie SR)
2.7 inch wide-LCD, approx. 230,000 dots
Single-frame, 6-frame, 12-frame, Enlargement (max. 10×, scrollable),
Folder Display, Calendar Display, Histogram Display, Deleting
Selected Images, Slideshow, Image Rotation, Small Face Filter,
Miniature Filter, HDR Filter, Digital Filter, Frame Composite, Movie
Playback/Edit (Save as Still Image, Divide Movies), Red-eye
Compensation, Resize, Cropping, Image Copy, Protect, DPOF, Startup Screen
Autofocus, Macro, Super Macro, Pan Focus, Infinity
Type
TTL contrast detection system by sensor
9-point autofocus (multiple/spot/automatic
tracking AF changeable)
Focus range
Standard
: 0.4 m - ∞ (Wide-angle)
(From lens face)
1 m - ∞ (Telephoto)
Macro
: 0.1 m - 0.5 m (Wide-angle)
0.3 m - 0.5 m (Mid-zoom)
Super Macro : 0.05 m - 0.2 m (Fixed at Wideangle)
* It is possible to switch to Pan Focus or Infinity.
* Face Detection AF is available only while the
camera detects the subject’s face.
Focus Lock
By half-pressing the shutter release button
Metering System Multi-segment metering
Exposure
±2 EV (can be set in 1/3 EV steps)
Compensation
Detection of up to 16 people’s faces (up to 16 face detection frames
on the display), Smile Capture
* Face Detection AE is available only while the camera detects the
subject’s face.
Auto Picture, Program, Blue Sky, Landscape, Flower, Sunset, Night
Scene, Night Scene Portrait, Portrait, Natural Skin Tone, Food, Digital
SR, Kids, Pet, Sport, Surf & Snow, Fireworks, Frame Composite,
Party, Candlelight, Text, Miniature Filter, HDR Filter, Green
B&W, Sepia, Toy Camera, Retro (Original image, Amber, Blue), Color
(Red, Pink, Purple, Blue, Green, Yellow), Extract Color (Red, Green,
Blue), Color Emphasis (Sky Blue, Fresh Green, Delicate Pink,
Autumn Leaves), Soft, Brightness
Continuous
Approx. 1 second - until built-in memory or SD
Recording Time
Memory Card is full (however, maximum size is
limited to 2 GB)
1/2000 sec. - 1/4 sec., max. 4 sec. (Night Scene mode)
163
Built-in Flash
Drive Modes
Self-timer
Time Function
Power Source
Battery Life
Interfaces
Video Output
Dimensions
Weight
Accessories
8
Modes
Flash Range
Auto, Flash Off, Flash On, Flash On + Red-eye
Wide-angle: approx. 0.3 m - 3.6 m
(approx. 1.0 ft - 12 ft)
(Sensitivity: in Auto condition)
Telephoto: approx. 1.0 m - 2.2 m
(approx. 3.3 ft - 7.2 ft)
(Sensitivity: in Auto condition)
Single-frame, Self-timer (approx. 10 sec., approx. 2 sec.), Continuous
Shooting, Burst Shooting
Electronic control type, control time: Approx. 10 sec., 2 sec.
World Time
75 cities (28 time zones)
Rechargeable lithium-ion battery D-LI108
Number of
* Recording capacity shows approximate number
Recordable
of shots recorded during CIPA-compliant testing
Images
(with display on, flash used for 50% of the shots,
approx. 200
and 23 degrees centigrade).
pictures
Actual performance may vary according to
operating conditions.
Playback Time
* According to the result of in-house testing.
approx. 130 min.
Actual time may differ depending on usage
conditions.
Movie Recording
Time
approx. 70 min.
USB 2.0 (high-speed compatible) /PC/AV terminal
NTSC/PAL (monaural)
Approx. 101 (W) × 46.5 (H) × 22.5 (D) mm (excluding operating or
protruding parts)
Approx. 105 g (excluding battery and SD Memory Card)
Approx. 122 g (including battery and SD Memory Card)
Rechargeable lithium-ion battery, Power adapter, USB cable,
Alternative Skins, Lens Ring (installed on camera), Software (CDROM), Strap, Operating Manual, Quick Guide
Appendix
Downloaded From camera-usermanual.com
164
WARRANTY POLICY
All PENTAX cameras purchased through authorized bona fide photographic
distribution channels are guaranteed against defects of material or workmanship
for a period of twelve months from date of purchase. Service will be rendered, and
defective parts will be replaced without cost to you within that period, provided the
equipment does not show evidence of impact, sand or liquid damage,
mishandling, tampering, battery or chemical corrosion, operation contrary to
operating instructions, or modification by an unauthorized repair shop. The
manufacturer or its authorized representatives shall not be liable for any repair or
alterations except those made with its written consent and shall not be liable for
damages from delay or loss of use or from other indirect or consequential
damages of any kind, whether caused by defective material or workmanship or
otherwise; and it is expressly agreed that the liability of the manufacturer or its
representatives under all guarantees or warranties, whether expressed or
implied, is strictly limited to the replacement of parts as hereinbefore provided. No
refunds will be made on repairs by non-authorized PENTAX service facilities.
Downloaded From camera-usermanual.com
8
Appendix
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should
be returned to the dealer from whom you purchased the equipment or to the
manufacturer. If there is no representative of the manufacturer in your country,
send the equipment to the manufacturer, with postage prepaid. In this case, it will
take a considerable length of time before the equipment can be returned to you
owing to the complicated customs procedures required. If the equipment is
covered by warranty, repairs will be made and parts replaced free of charge, and
the equipment will be returned to you upon completion of servicing. If the
equipment is not covered by warranty, regular charges of the manufacturer or of
its representatives will apply. Shipping charges are to be borne by the owner. If
your PENTAX was purchased outside of the country where you wish to have it
serviced during the warranty period, regular handling and servicing fees may be
charged by the manufacturer’s representatives in that country. Notwithstanding
this, your PENTAX returned to the manufacturer will be serviced free of charge
according to this procedure and warranty policy. In any case, however, shipping
charges and customs clearance fees to be borne by the sender. To prove the date
of your purchase when required, please keep the receipt or bills covering the
purchase of your equipment for at least a year. Before sending your equipment
for servicing, please make sure that you are sending it to the manufacturer’s
authorized representatives or their approved repair shops, unless you are
sending it directly to the manufacturer. Always obtain a quotation for the service
charge, and only after you accept the quoted service charge, instruct the service
station to proceed with the servicing.
165
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some
countries can supersede this warranty policy. Therefore, we recommend
that you review the warranty card supplied with your product at the time
of purchase, or contact the PENTAX distributor in your country for more
information and to receive a copy of the warranty policy.
8
Appendix
The CE Mark is a Directive conformity mark of the European
Union.
Downloaded From camera-usermanual.com
166
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada.
8
Appendix
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply. The lithium battery
used in this camera contains perchlorate material, which may require
special handling. See www.dtsc.ca.gov/hazardouswaste/perchlorate
Downloaded From camera-usermanual.com
167
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
PENTAX RICOH IMAGING AMERICAS
CORPORATION
Located at: 633 17 th Street, Suite 2600
Denver, Colorado 80202 U.S.A.
Phone: 800-877-0155 Fax: 303-790-1131
Declare under sole responsibility that the product identified herein
complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed is identical to the representative unit
tested and found to be compliant with the standards. Records
maintained continue to reflect the equipment being produced can be
expected to be within the variation accepted, due to quantity production
and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation. The above named party is responsible for ensuring that the
equipment complies with the standards of 47CFR §15.101 to §15.109.
8
Product Name: Digital Camera
Appendix
Model Number: Optio LS465
Contact person: Customer Service Manager
Date and Place: April, 2012, Colorado
Downloaded From camera-usermanual.com
168
Information for Users on Collection and Disposal of Old Equipment
and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or
accompanying documents mean that used electrical
and electronic equipment and batteries should not be
mixed with general household waste.
Used electrical/electronic equipment and batteries must
be treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling of
these products.
By disposing of these products correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy metal
(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a
concentration above an applicable threshold specified in the Battery
Directive.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to
discard used products, please contact your local authorities or dealer
and ask for the correct method of disposal.
8
Appendix
For more information about collection and recycling of used products,
please contact your local authorities, your waste disposal service or the
point of sale where you purchased the products.
For Switzerland: Used electrical/electronic equipment can be returned
free of charge to the dealer, even when you don’t purchase a new
product. Further collection facilities are listed on the home page of
www.swico.ch or www.sens.ch.
Downloaded From camera-usermanual.com
169
Downloaded From camera-usermanual.com
Index
Symbols
Downloaded From camera-usermanual.com
N Frame Composite
...................................66, 113
B Party ..............................59
U Candlelight ....................59
c Text ...............................67
o Miniature ...........68, 108
p HDR ..................68, 108
A
Alternative Skins ................27
Auto F .........................77
Auto Picture Mode .............60
Auto Power Off ................133
Auto, ................................70
Automatic Tracking
AF ................................59, 74
AV cable ..........................103
AV equipment ..................103
B
B&W filter .........................110
Basic mode ........................61
Battery level indicator ........33
Blue Sky Mode ...................58
Brightness filter ................110
Brightness Level ..............132
Built-in memory ................118
Burst Shooting q ..............71
C
Calendar display ................92
Camera shake ...................86
Candlelight Mode ...............59
Capture Mode Palette ........57
Charging a battery .............31
Checking the SD Memory
Card ...................................36
City name .........................159
8
Appendix
A Mode ...................... 12, 46
Q Mode ..................... 12, 46
Q button .................... 42, 44
[A Rec. Mode]
menu ......................... 50, 154
[C Movie] Menu ........ 51, 155
[W Setting] menu ....... 52, 156
i Delete ..................... 89, 98
T Tele ................................ 63
W Wide .............................. 63
y Magnify ......................... 97
f Six-/Twelve-image
display ............................... 91
g Self-timer ...................... 71
j Continuous Shooting .... 71
q Burst Shooting ............. 71
9 Green Mode ................. 61
b Auto Picture ................. 60
R Program ....................... 61
f Blue Sky ....................... 58
a Landscape ................... 58
b Flower ........................... 58
K Sunset ........................ 58
A Night Scene ................. 58
B Night Scene Portrait ..... 58
c Portrait .......................... 58
d Natural Skin Tone ........ 58
K Food .............................. 58
c Digital SR ................... 58
R Kids ............................... 58
H Pet ................................ 65
\ Sport ............................. 58
Q Surf & Snow ................. 58
S Fireworks ..................... 58
171
Color Emphasis filter ....... 110
Color filter ........................ 110
Connecting to a TV .......... 103
Continuous Shooting j .... 71
Contrast ............................. 81
Copy ................................ 118
Cropping .......................... 106
D
Date and time
setting ........................ 40, 125
Date Imprint ....................... 81
Daylight G ......................... 77
Daylight saving
time .................................. 128
Default settings ................ 154
Delete i ..................... 89, 98
Delete all ........................... 99
Destination ...................... 127
Digital Filter ..................... 110
Digital SR .......................... 58
Digital Zoom ................ 63, 64
Display brightness ........... 132
Display language ....... 37, 129
Dividing movies ............... 117
DPOF settings ................. 120
Drive Mode ........................ 71
8
E
Appendix
Editing movies ................. 116
Error messages ............... 150
Exposure setting ................ 76
Extract Color filter ............ 110
F
Face Detection ............ 59, 79
File number ....................... 87
Filters ................. 68, 108, 110
Fireworks Mode ................. 58
Flash Mode ........................ 70
Flash Off a ....................... 70
Downloaded From camera-usermanual.com
172
Flash On + Red-eye d ......70
Flash On b ........................70
Flower Mode ......................58
Fluores. Light J ................77
Focus Mode .......................73
Focusing ............................73
Focusing Area ....................74
Folder display ....................92
Folder name .....................130
Food Mode .........................58
Format .............................123
Four-way controller ......43, 45
Frame Composite ......66, 113
Frame rate .........................86
G
Green Button .........43, 45, 82
Green Mode .......................61
Guide indications ...............24
H
HDR Filter ..................68, 108
Histogram ..........................24
Hometown ........................127
I
Image Storage
Capacity ...........................162
Infinity s ............................73
Info Display ........................21
Initial settings .....................37
Installing a battery ..............29
Installing the Software .....141
Instant Review ...................57
Intelligent Zoom .................63
K
Kids Mode ..........................58
L
Landscape Mode ...............58
Macintosh ........................ 141
Macro q ............................ 73
Magnify y ......................... 97
Manual K ......................... 77
Mass Storage Class ........ 137
MediaImpression ............. 140
Memory ............................. 87
3 button .............. 43, 45
Miniature Filter ........... 68, 108
Movie ................................. 84
Movie button ...................... 42
Movie Editing ................... 116
Movie menu ............... 51, 155
Movie SR (Movie Shake
Reduction) Function .......... 86
MSC ................................ 137
Picture Transfer Protocol
.........................................137
Pixel Mapping ..................135
Playback ......................89, 90
Playback Mode ................136
Playback Mode
Palette ........................93, 157
Playing back movies ..........90
Portrait Mode .....................58
Power Saving ...................133
Power switch ..........36, 42, 44
Press fully
(shutter release button) ......56
Press halfway
(shutter release button) ......56
Product registration ..........144
Program Mode ...................61
Protect Z ......................100
PTP ..................................137
N
R
Language setting ....... 37, 129
M
Natural Skin Tone Mode .... 58
Night Scene Mode ............. 58
Night Scene Portrait
Mode ................................. 58
NTSC ............................... 131
Number of pixels ............... 75
O
P
PAL ................................. 131
Pan Focus 3 ................... 73
Party Mode ........................ 59
Pet Mode ........................... 65
Photo processing lab ....... 120
Downloaded From camera-usermanual.com
S
Saturation ..........................81
Saving as still picture
(movie) .............................116
Saving pictures by date ...130
Saving settings ..................87
Screen effect ......................95
SD Memory Card ...............34
Select Time ......................128
8
Appendix
4 button ................... 43, 45
Opening screen ............... 134
Operating the menus ......... 47
Optional accessory .......... 160
Rec. Mode menu .......50, 154
Recorded Pixels ...........75, 86
Recording movies ..............84
Red-eye Compensation ...112
Red-eye reduction d .........70
Registering menu items .....82
Reset ...............................136
Resize ..............................105
Retro filter ........................110
Rotating .............................96
173
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
PENTAX RICOH IMAGING CO., LTD.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX RICOH IMAGING
FRANCE S.A.S.
(European Headquarters)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)
PENTAX RICOH IMAGING
DEUTSCHLAND GmbH
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX RICOH IMAGING
UK LTD.
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX RICOH IMAGING 633 17th Street, Suite 2600, Denver, Colorado 80202,
AMERICAS CORPORATION U.S.A.
(http://www.pentaximaging.com)
PENTAX RICOH IMAGING
CANADA INC.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
PENTAX RICOH IMAGING
CHINA CO., LTD.
23D, Jun Yao International Plaza, 789 Zhaojiabang
Road, Xu Hui District, Shanghai, 200032, CHINA
(http://www.pentax.com.cn)
http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
54572
Copyright © PENTAX RICOH IMAGING CO., LTD. 2012
R02AYF12 Printed in China
Downloaded From camera-usermanual.com
">