Samsung SP-L221 LCD User Guide

SP-L201 SP-L221 SP-L251
LCD Projector
Owner’s Instructions
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
INSTALLATION AND CONNECTION
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Leveling with Adjustable Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Zoom and Focus Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Screen Size and Projection Distance
. . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Lamp Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Rear Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Setting up the PC Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Supported Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Connecting with a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Connecting a PC using an HDMI/DVI cable . . . . . . . . . . . . . . . . . . . . 2-12
Connecting an External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
Connecting an HDMI-Compatible Device . . . . . . . . . . . . . . . . . . . . . . 2-14
Connecting an AV device using a D-Sub cable . . . . . . . . . . . . . . . . . 2-15
Connecting an AV device with component output . . . . . . . . . . . . . . 2-16
Connecting using a Video/S-Video cable . . . . . . . . . . . . . . . . . . . . . . 2-17
Connecting an External Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
USING
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Front, Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
LED Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-5
TROUBLESHOOTING
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
MORE INFORMATION
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
RS-232C Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Correct Disposal - Europe only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
1
Major Safety Precautions
1-1
Before You Start
Icons used in this manual
ICON
NAME
MEANING
Caution
Indicates cases where the function may not work or the setting may be canceled.
Note
Indicates a hint or tip to operate a function.
Using this Manual
•
Make yourself fully aware of the safety precautions before using this product.
•
If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
Copyright © 2009 Samsung Electronics Co., Ltd. All rights reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written
permission of Samsung Electronics, Co., Ltd.
1-2
Care and Maintenance
Cleaning the Surface and the Lens
Clean the projector using a soft dry cloth.
•
Avoid cleaning the product with a flammable substance such as
benzene or thinner.
•
Avoid scratching the lense with your fingernails or a sharp
object.
This may result in scratches or damage to the product.
•
Avoid cleaning the product with a wet cloth or by directly
spraying water onto the product.
If water enters the product, it may result in fire, electric shock, or
a problem with the product.
•
A white stain may appear on the surface of the projector if water
gets on it.
The appearance and the color may differ depending on
models.
Cleaning Inside the Projector
For cleaning the interior of the projector, contact a Service Center.
•
Contact a Service Center if dust or other substances are inside
the projector.
1-3
Safety Precautions
Icons used for safety precautions
ICON
NAME
MEANING
Warning
Failing to follow the precautions marked with this sign may result in a serious injury or even
a fatality.
Caution
Failing to follow the precautions marked with this sign may result in a personal injury or
property damage.
Meaning of Signs
Do not perform.
Must be followed.
Do not disassemble.
The power plug must be unplugged from the
wall outlet.
Do not touch.
Must be grounded to prevent electric shock.
Power Related
The following images are for your reference and may differ depending on models and countries.
Warning
Plug the power plug in firmly.
•
Otherwise, it may result in fire.
Avoid connecting multiple electric appliances to a single wall outlet.
•
Avoid using a damaged power cord or plug
or a loose power outlet.
•
Otherwise, it may result in electric
shock or fire.
Avoid plugging in or unplugging the power
supply with wet hands.
•
Otherwise, it may result in electric
shock.
Otherwise, it may result in fire due to
overheating of the wall outlet.
Avoid bending or twisting the power cord
excessively and avoid placing heavy
objects on the cord.
•
Otherwise, it may result in electric
shock or fire due to a damaged power
cord.
To move the product, turn the power off
and unplug the power cord and any other
wires connected to the product.
•
Otherwise, it may result in electric
shock or fire due to the damaged
power cord.
Make sure to connect the power cord to a
grounded wall outlet (for insulation class 1
equipment only).
•
Otherwise, it may result in electric
shock or injury.
Major Safety Precautions
1-3
Caution
When unplugging the power plug from the
wall outlet, make sure to hold the power
plug by the plug and not by the cord.
•
Failing to do so may result in electric
shock or fire.
Unplug the power plug before cleaning the
product.
•
Do not turn the product on or off by plugging or unplugging the power plug. (Do not
use the power plug as a power switch.)
Keep the power cord away from sources of
heat.
There is a danger of electric shock or
fire.
Connect the power plug to a wall outlet
that can be easily reached.
•
When a problem occurs with the
product, you must unplug the power
plug to cut the power off completely.
You cannot cut the power off
completely using only the power button
on the product.
Installation Related
Warning
Avoid installing the product in a location
exposed to direct sunlight and installing
the product near a heat source such as a
fire or heater.
•
Avoid installing the product in a badly-ventilated location such as inside a bookshelf
or closet.
•
This may shorten the product life cycle
or cause fire.
Otherwise, it may result in fire due to
internal overheating.
When installing the product in a cabinet or
shelf, take care so that the front end of the
product is completely supported by the
cabinet or shelf.
When installing the product on a console
or shelf, make sure that the front of the
product does not protrude out of the console or shelf.
•
Failing to do so may result in the
product falling and resulting in damage
to the product or injury.
•
•
Make sure to use a cabinet or shelf
suitable to the size of the product.
Otherwise, this may cause the product
to fall off and result in a malfunction or
injury.
Keep the power cord away from heaters.
When thunder or lighting occurs, unplug
•
the power cord.
The coating of the power cord may
melt and cause electric shock or fire.
Do not install the product in a location
exposed to dust, moisture (sauna), oil,
•
Failing to do so may result in electric
shock or fire.
Do not install the product in areas with
heavy dust.
smoke or water (rain drops) and do not
install it in a vehicle.
•
1-3
This may result in electric shock or fire.
Major Safety Precautions
Caution
Take care not to block the vent with a table
cloth or curtain.
•
Do not let the product drop while moving it.
•
Otherwise, it may result in fire due to
internal overheating.
This may result in a problem with the
product or injury.
When putting the product down, place it
gently.
Do not install the product at a height where
children may reach it.
•
•
Failing to do so may result in a problem
with the product or injury.
If a child touches the product, the
product may fall and this may result in
injury.
Usage Related
Avoid inserting metal objects such as a
chopsticks, coins or hairpins, or inflammable objects into the product (the vents,
ports, etc).
•
If water or an alien substance enters
the product, turn the power off, unplug
the power cord and contact a service
center.
•
Otherwise, it may result in a problem
with the product, electric shock or fire.
Do not disassemble, or attempt to fix or
modify the product.
•
When the product requires repairs,
contact a Service Center.
Avoid using or placing inflammable spray
or objects near the product.
•
This may result in an explosion or fire.
Do not let children place objects such as
toys or cookies on the product.
•
If a child tries to reach for any of these
objects, the product may fall and cause
harm.
Do not look directly at the light of the lamp
nor project the picture into someone's
eyes.
•
This is dangerous, especially for
children.
When you remove batteries from the
remote, be careful that they are not swallowed by children. Keep batteries out of
the reach of children.
•
If swallowed, see a doctor immediately.
Avoid placing a liquid container such as a
vase, flowerpot, beverage, cosmetics or
drugs, or a metal object over the product.
•
If water or an alien substance enters
the product, turn the power off, unplug
the power cord and contact a service
center.
•
Otherwise, it may result in a problem
with the product, electric shock or fire.
Major Safety Precautions
1-3
Caution
If the product generates a strange noise, a
burning smell, or smoke, unplug the power
plug immediately and contact a service
center.
•
Failing to do so may result in electric
shock or fire.
If the power plug pin or jack is exposed to
dust, water or alien substances, clean it
thoroughly.
Do not use the product while it indicates a
malfunction, such as no sound or no picture.
•
•
There is a danger of electric shock or
fire.
Turn the product off immediately,
unplug the power cord from a wall
outlet, and contact a Service Center.
When cleaning the product, disconnect the
power cord and clean the product with a
soft dry cloth.
When a gas leak occurs, do not touch the
product or the power plug and ventilate
immediately.
•
•
A spark may result in an explosion or
fire.
•
During a thunder or lighting storm, do
not touch the power cord or antenna
cable
Avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or
cleansing agent when cleaning the
product.
This may result in the exterior being
deformed or the print being removed.
When not using the product for a long
time, such as leaving your home, unplug
the power cord from the wall outlet.
•
•
This may cause damage to the lens.
Do not touch any outer part of the product
with tools such as a knife or a hammer.
To clean dirt or stains on the front projection lens, use spray or a wet cloth dampened with neutral detergent and water.
Failing to do so may result in fire or
electric shock.
Make sure to place your remote control on
a table or desk.
•
•
Places exposed to microscopic dust,
chemicals, too high or low temperature,
high humidity, such as airports or
stations where the product is
continuously used for a long time etc..
If you drop the product or the case is damaged, turn the power off and unplug the
power cord. Contact a service center.
•
Do not touch the lens on the product.
Otherwise, it may cause dust
accumulation and result in fire caused
by overheating or a short circuit or
result in an electric shock.
If the product is installed in a location
where the operating conditions vary considerably, a serious quality problem may
occur due to the surrounding environment.
In this case, install the product only after
consulting our Call Center.
1-3
If water or a foreign substance enters the
product, turn the product off, unplug the
power cord from a wall outlet, and contact
a Service Center.
Ask a Service Center to clean the interior
of the projector at least once per year.
If you step on the remote control, you
may fall and hurt yourself or the
product may be damaged.
Major Safety Precautions
To avoid burning yourself, do not touch the
vents or lamp cover while operating or
right after turning off the product.
Do not clean the product using water spray
or a wet cloth. Avoid using any chemicals
such as detergents, industrial or automotive polish, abrasive, wax, benzene, alcohol on any plastic part of the product such
as projector case, since this may cause
damage.
Do not open any cover on the product.
Do not use any undesignated battery.
•
This would prove hazardous because
of high-voltage current inside the
product.
Be careful not to touch the ventilation hole
while the projector is on as hot air comes
out.
The ventilation hole is hot for some time
though the projector is turned off. Keep
you hands or body off the ventilation hole.
Do not place objects vulnerable to heat
near the projector.
Be careful to keep your body away from
the projector lamp. The lamp is hot.
(Children and those who have sensitive
skin should be more careful.)
Major Safety Precautions
1-3
2
Installation and Connection
2-1
Package Contents
•
Unpack the product and check if all of the contents listed below have been included.
•
Store the packaging box in case you need to move the product at a later stage.
Projector
CONTENTS
Quick Installation Guide
Warranty Card / Registration
Card (Not available in all
locations)
User Manual
Remote Control / 1 Battery
(CR 2025, Not available in all
locations)
Cleaning Cloth
D-Sub Cable
2-1
Power Cord
Installation and Connection
2-2
Installing the Projector
Install the projector so that the beam from the projector is perpendicular to the screen.
•
Place the projector so that the lens aims at the center of the screen. If the screen is not vertical, the picture on the
screen may not appear rectangular.
•
Do not install the screen in bright surroundings. If the surroundings are too bright, the picture on the screen will be
washed out and not display clearly.
•
When using the projector in bright surroundings, use curtains to block the light.
•
You can install the projector in the following locations: Front-Floor / Front-Ceiling / Rear-Floor / Rear-Ceiling. To view
the installation position settings, see below.
To adjust picture when you install the projector behind the screen
Installing behind a semi-transparent screen.
When you install the projector behind a semi-transparent screen,
you can use the menu to adjust the picture so that it displays correctly, depending on where you've located the projector, rearfloor (or low) or rear-ceiling.
1. For rear-floor, press :
Menu > Setup > Install > Rear-Floor
2. For rear-ceiling, press :
Menu > Setup > Install > Rear-Ceiling
To adjust the picture when you install the projector in the front of the screen
Install the projector on the side where you are watching the
screen.
When you install the projector in front of a screen, you can use
the menu to adjust the picture so that it displays correctly,
depending on where you’ve located the projector, front-floor (or
low) or front-ceiling.
1. For front-floor, press :
Menu > Setup > Install > Front-Floor
2. For front-ceiling, press :
Menu > Setup > Install > Front-Ceiling
Installation and Connection
2-2
2-3
Leveling with Adjustable Feet
To level the projector, turn the Adjustable Feet of the projector.
The projector can be adjusted to a height of up to 30 mm (about 12 °) from the reference point.
Depending on the position of the projector, Keystone distortion of the image may appear.
If <Auto Keystone> is set to <On>, any keystone will be automatically adjusted. If fine tuning is required after autoadjustment, tune using the <V-Keystone>.
2-3
Installation and Connection
2-4
Zoom and Focus Adjustment
Zoom Knob : You can adjust the size of the image within the
zoom range by manipulating the Zoom Knob.
Focus Ring : Focus the picture on the screen using the Focus
Ring.
The size of your screen determines the distance you set your projector from the screen.
If you do not install your projector at the projection distance specified in the Screen Size and Projection Distance table on
the next page, you will not be able to adjust the focus correctly.
Installation and Connection
2-4
2-5
Screen Size and Projection Distance
A. Screen / Z. Throw Distance / Y’. Distance from Lens Center to Image Bottom
Install the projector on a flat, even surface and level the projector using the adjustable feet to obtain optimal picture quality. If
images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward.
SCREEN SIZE
M (DIAGONAL)
INCHES
CM
X (HORIZONTAL)
INCHES
CM
THROW DISTANCE
Y (VERTICAL)
INCHES
CM
Z (TELE)
INCHES
CM
OFFSET
Z (WIDE)
INCHES
CM
Y'
INCHES
CM
40
101.6
32
81.3
24
61.0
54.2
137.6
44.9
114.0
4.0
10.2
50
127.0
40
101.6
30
76.2
68.0
172.7
56.4
143.3
5.0
12.7
60
152.4
48
121.9
36
91.4
81.8
207.8
68.0
172.6
6.0
15.2
70
177.8
56
142.2
42
106.7
95.7
243.0
79.5
202.0
7.0
17.8
80
203.2
64
162.6
48
121.9
109.5
278.1
91.1
231.3
8.0
20.3
90
228.6
72
182.9
54
137.2
123.4
313.3
102.6
260.6
9.0
22.9
100
254.0
80
203.2
60
152.4
137.2
348.4
114.1
289.9
10.0
25.4
110
279.4
88
223.5
66
167.6
151.0
383.5
125.7
319.2
11.0
27.9
120
304.8
96
243.8
72
182.9
164.8
418.7
137.2
348.5
12.0
30.5
130
330.2
104
264.2
78
198.1
178.7
453.8
148.7
377.8
13.0
33.0
140
355.6
112
284.5
84
213.4
192.5
488.9
160.3
407.1
14.0
35.6
150
381.0
120
304.8
90
228.6
206.3
524.1
171.8
436.4
15.0
38.1
160
406.4
128
325.1
96
243.8
220.2
559.2
183.4
465.7
16.0
40.6
170
431.8
136
345.4
102
259.1
234.0
594.4
194.9
495.0
17.0
43.2
180
457.2
144
365.8
108
274.3
247.8
629.5
206.4
524.3
18.0
45.7
190
482.6
152
386.1
114
289.6
261.7
664.6
218.0
553.6
19.0
48.3
200
508.0
160
406.4
120
304.8
275.5
699.8
229.5
582.9
20.0
50.8
210
533.4
168
426.7
126
320.0
289.3
734.9
241.0
612.2
21.0
53.3
220
558.8
176
447.0
132
335.3
303.2
770.1
252.6
641.5
22.0
55.9
230
584.2
184
467.4
138
350.5
317.0
805.2
264.1
670.8
23.0
58.4
240
609.6
192
487.7
144
365.8
330.8
840.3
275.6
700.1
24.0
61.0
250
635.0
200
508.0
150
381.0
344.7
875.5
287.2
729.4
25.0
63.5
260
660.4
208
528.3
156
396.2
358.5
910.6
298.7
758.7
26.0
66.0
2-5
Installation and Connection
SCREEN SIZE
M (DIAGONAL)
INCHES
CM
X (HORIZONTAL)
INCHES
CM
THROW DISTANCE
Y (VERTICAL)
INCHES
CM
Z (TELE)
INCHES
CM
OFFSET
Z (WIDE)
INCHES
CM
Y'
INCHES
CM
270
685.8
216
548.6
162
411.5
372.3
945.7
310.2
788.0
27.0
68.6
280
711.2
224
569.0
168
426.7
386.2
980.9
321.8
817.3
28.0
71.1
290
736.6
232
589.3
174
442.0
400.0
1016.0
333.3
846.6
29.0
73.7
300
762.0
240
609.6
180
457.2
413.9
1051.2
344.9
875.9
30.0
76.2
This projector is designed to show images optimally on a 80 ~ 120 inch sized screen.
Installation and Connection
2-5
2-6
Lamp Replacement
Cautions on Lamp Replacement
•
The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage time.
You can view the lamp usage time in the Information Display (INFO button).
•
Use the recommended lamp when replacing. Replace the lamp with the one specified below.
- Lamp Model Name : NSHA230SS
- Lamp Manufacturer : Ushio
- For inquiries on lamp purchase, please refer to 'Contact SAMSUNG WORLDWIDE'.
•
Check that the power cord is unplugged before replacing the lamp.
•
Because the lamp is a high temperature and high voltage product, wait at least one hour from the time you disconnect the
power cord before replacing the lamp.
•
The lamp is located on the left side of the projector (when looking from the front).
•
Do not leave the old lamp near inflammables or in reach of children. There is a danger of burn or injury.
•
Remove dirt or foreign material around or inside the lamp unit using a proper vacuum device.
•
When handling the lamp, avoid touching any part of it except for the handles. If you handle the lamp incorrectly, you can
shorten the lamp’s lifetime and affect picture quality.
•
When you turn the projector over to change the lamp, put the projector on a soft cloth on a flat surface.
•
The projector has been designed so that the projector does not work if the lamp cover is not completely assembled after a
lamp replacement. If the projector does not work properly, please check the operating status of the indicator LED.
Lamp contains Mercury. Dispose According to Local, State or Federal Laws.
Lamp Replacement Procedure
Since the lamp is a high temperature and high voltage product, wait at least one hour from the time that the power cord is
disconnected before replacing it.
The lamp is located on the left side of the projector (when looking from the front).
1. Remove the screw shown in the figure below and than open the cover.
2. Remove the two (2) screws shown in the figure below.
2-6
Installation and Connection
3. Hold and pull the lamp handle out of the projector, as shown in the figure below.
Assemble a new lamp in the reverse order of disassembly.
Replacing and Cleaning the Filter
Precautions when replacing the projector filter:
•
The filter is located at the bottom of the projector.
•
Turn off the power of the projector, and then disconnect the power cord after the projector has cooled sufficiently.
Otherwise, its parts may be damaged due to internal heat.
•
When you replace the filter, you may release some dust.
•
For inquiries on filter purchase, please refer to 'Contact SAMSUNG WORLDWIDE'.
The sequence for replacing or cleaning the filter of the projector.
1. Turn off the power of the projector, and then disconnect the power cord after the projector has cooled sufficiently.
2. Turn the projector over so that its bottom points upward, and then push and remove the filter cover in the direction of the
arrow.
* When placing the projector with the bottom facing up, make sure to place a soft cloth under the projector to prevent
scratches.
3. Replace or clean the filter.
•
When cleaning the filter, use a small vacuum cleaner designed for computers and small electronics products, or wash it under
Installation and Connection
2-6
running water.
•
After washing the filter under running water, make sure to dry it completely. The moisture may cause the filter to corrode.
•
If dust cannot be separated from the filter or the filter is torn, it must be replaced.
•
Make sure to select the Reset Filter Time option after replacing or cleaning the filter of the projector
Ventilation openings
The location of the ventilation openings:
•
2-6
The ventilation openings are located on the right and left sides and at the bottom of the projector.
Installation and Connection
2-7
Rear Side
1. PC IN port
7. AUDIO OUT port
2. PC/DVI AUDIO IN port
8. [AV IN] R-AUDIO-L port
3. HDMI/DVI IN port
9. [AV IN] VIDEO Input port
4. Remote Control Signal Receiver
10. [AV IN] S-VIDEO port
5. RS-232C port (For service only)
11. Kensington Lock
6. PC OUT port
12. POWER Input port
Installation and Connection
2-7
2-8
Setting up the PC Environment
Check the following items before connecting your PC to your projector.
1. Click the right mouse button on the Windows desktop, and then click [Properties].
The <Display Properties> dialog appears.
2. Click the [Settings] tab, and then set the <Screen resolution>. The optimal resolution for the projector is 1024 x 768. For other
resolutions supported by the projector, see the PC Timing Display Mode table in section 2-9.
You do not have to change the <Color quality> setup.
3. Press the [Advanced] button. Another property window appears.
4. Click the [Monitor] tab and set the <Screen refresh rate>. For the refresh rate that matches the resolution you’ve chosen, see
the refresh rate (60 Hz, 70 Hz, etc.) next to your selected resolution in the PC Timing Display Mode table in section 2-9.
Setting the refresh rate sets both the vertical and horizontal frequencies.
2-8
Installation and Connection
5. Click the [OK] button to close the window, and click the [OK] button on the <Display Properties> window to close the window.
The computer may restart automatically.
6. Shut down the PC and connect to the projector.
The setup process might vary depending on your type of computer or version of Windows.
(For example, [Properties] appears instead of [Properties (R)] as shown in 1.)
This projector supports 32 bit color quality (per pixel) when it is used as a PC monitor.
Projected images may differ from the images on your monitor depending on the monitor manufacturer or Windows version.
When connecting the projector to a PC, make sure that the PC setup complies with the display settings supported by this
projector. If it does not, you may have signal problems.
Installation and Connection
2-8
2-9
Supported Display Modes
PC Timing (D-Sub/HDMI)
FORMAT
2-9
RESOLUTION
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
IBM
640 x 350
70Hz
31.469
70.086
25.175
IBM
640 x 480
60Hz
31.469
59.940
25.175
IBM
720 x 400
70Hz
31.469
70.087
28.322
VESA
640 x 480
60Hz
31.469
59.940
25.175
MAC
640 x 480
67Hz
35.000
66.667
30.240
VESA
640 x 480
70Hz
35.000
70.000
28.560
VESA
640 x 480
72Hz
37.861
72.809
31.500
VESA
640 x 480
75Hz
37.500
75.000
31.500
VESA
720 x 576
60Hz
35.910
59.950
32.750
VESA
800 x 600
56Hz
35.156
56.250
36.000
VESA
800 x 600
60Hz
37.879
60.317
40.000
VESA
800 x 600
70Hz
43.750
70.000
45.500
VESA
800 x 600
72Hz
48.077
72.188
50.000
VESA
800 x 600
75Hz
46.875
75.000
49.500
MAC
832 x 624
75Hz
49.726
74.551
57.284
VESA
1024 x 768
60Hz
48.363
60.004
65.000
VESA
1024 x 768
70Hz
56.476
70.069
75.000
VESA
1024 x 768
72Hz
57.672
72.000
78.434
VESA
1024 x 768
75Hz
60.023
75.029
78.750
VESA
1152 x 864
60Hz
53.783
59.959
81.750
VESA
1152 x 864
70Hz
63.000
70.000
96.768
VESA
1152 x 864
72Hz
64.872
72.000
99.643
VESA
1152 x 864
75Hz
67.500
75.000
108.000
VESA
1280 x 720
60Hz
44.772
59.855
74.500
VESA
1280 x 720
70Hz
52.500
70.000
89.040
VESA
1280 x 720
72Hz
54.072
72.000
91.706
VESA
1280 x 720
75Hz
56.456
74.777
95.750
VESA
1280 x 768
60Hz
47.776
59.870
79.500
VESA
1280 x 768
75Hz
60.289
74.893
102.250
VESA
1280 x 800
60Hz
49.702
59.810
83.500
VESA
1280 x 800
75Hz
62.795
74.934
106.500
VESA
1280 x 960
60Hz
60.000
60.000
108.000
VESA
1280 x 960
70Hz
69.930
70.000
120.839
Installation and Connection
FORMAT
RESOLUTION
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
VESA
1280 x 960
72Hz
72.072
72.000
124.540
VESA
1280 x 960
75Hz
75.231
74.857
130.000
VESA
1280 x 1024
60Hz
63.981
60.020
108.000
VESA
1280 x 1024
70Hz
74.620
70.000
128.943
VESA
1280 x 1024
72Hz
76.824
72.000
132.752
VESA
1280 x 1024
75Hz
79.976
75.025
135.000
VESA
1400 x 1050
60Hz
65.317
59.978
121.750
VESA
1440 x 900
60Hz
55.935
59.887
106.500
VESA
1440 x 900
75Hz
70.635
74.984
136.750
VESA
1600 x 1200
60Hz
75.000
60.000
162.000
For the resolutions presented above, if a signal with a resolution lower or higher than 1024x768 is input, it is converted to
1024x768 by the Scaler chip inside the projector.
When the real resolution (1024x768) of the projector and the PC output resolution are the same, the screen quality is
optimal.
AV Timing (D-Sub)
FORMAT
RESOLUTION
SCAN
BT.601 SMPTE 267M
480i
59.94Hz
Interlaced
BT.1358 SMPTE 293M
480p
59.94Hz
Progressive
BT.601
576i
50Hz
Interlaced
BT.1358
576p
50Hz
Progressive
SMPTE 296M
720p
59.94Hz/60Hz
Progressive
720p
50Hz
Progressive
1080i
59.94Hz/60Hz
Interlaced
1080i
50Hz
Interlaced
BT.709 SMPTE 274M
AV Timing (HDMI)
FORMAT
RESOLUTION
SCAN
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
EIA-861
Format1
640 x 480
Progressive
59.940
31.469
25.175
EIA-861
Format1
640 x 480
Progressive
60.000
31.500
25.200
EIA-861
Format2,3
720 x 480
Progressive
59.940
31.469
27.000
EIA-861
Format2,3
720 x 480
Progressive
60.000
31.500
27.027
EIA-861
Format4
1280 x 720
Progressive
59.939
44.955
74.175
EIA-861
Format4
1280 x 720
Progressive
60.000
45.000
74.250
Installation and Connection
2-9
FORMAT
RESOLUTION
SCAN
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
EIA-861
Format5
1920 x 1080
Interlaced
59.939
33.716
74.175
EIA-861
Format5
1920 x 1080
Interlaced
60.000
33.750
74.250
EIA-861
Format17,18
720 x 576
Progressive
50.000
31.250
27.000
EIA-861
Format19
1280 x 720
Progressive
50.000
37.500
74.250
EIA-861
Format20
1920 x 1080
Interlaced
50.000
28.125
74.250
AV Timing (VIDEO/S-VIDEO)
NTSC, NTSC 4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
2-9
Installation and Connection
2-10 Connecting the Power
1. Plug the power cord into the power terminal on the rear side of the projector.
Installation and Connection
2-10
2-11 Connecting with a PC
1. Connect the [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2. Plug in the power cords of the projector and the PC.
3. Connect the [PC/DVI AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable.
This product supports plug and play. If you use Windows XP, you do not need to set up the driver on your PC.
Using the Projector
1. Turn on the projector and press the [SOURCE] button to select <PC>.
If the <PC> Mode is not available, make sure the PC video cable is properly connected.
2. Turn on the PC and set the PC Environment when necessary.
3. Adjust the screen. (<Auto Adjustment>)
2-11
Installation and Connection
2-12 Connecting a PC using an HDMI/DVI cable
Make sure that your PC and projector are turned off.
1. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI
cable (Not supplied).
- If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied).
- For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-9.
2. If you connected using a HDMI/DVI cable, connect the [PC/DVI AUDIO IN] terminal of the projector to the Audio out terminal
of your PC using an audio cable (Not supplied).
- If you connected with a HDMI/HDMI cable, you do not need an audio cable.
Installation and Connection
2-12
2-13 Connecting an External Monitor
You can view an image on both your projector and a separate monitor at the same time.
Make sure that your PC and projector are turned off.
1. Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable.
2. Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable.
- When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [PC IN] terminal.
- The monitor output which is connected to the [PC OUT] termininal will be normal even if you see a blank screen on your
projector.
- The [PC OUT] function will not operate in standby mode.
2-13
Installation and Connection
2-14 Connecting an HDMI-Compatible Device
First, Make sure that the AV device and your projector are turned off.
1. Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output
device using an HDMI/DVI or HDMI/HDMI cable.
- If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing(HDMI) in Section 2-9.
2. If you connected using a HDMI/DVI cable, connect the [PC/DVI AUDIO IN] terminal on the projector to the Audio out terminal
on your digital output device using an audio cable (Not supplied).
- If you connected with a HDMI/HDMI cable, you do not need an audio cable.
Installation and Connection
2-14
2-15 Connecting an AV device using a D-Sub cable
First, Make sure that the AV device and your projector are turned off.
1. Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-9.
2. Connect the [PC/DVI AUDIO IN] terminal at the back of the projector to the Audio out terminal of your AV device using an
audio cable (Not supplied).
2-15
Installation and Connection
2-16 Connecting an AV device with component output
First, Make sure that the AV device and your projector are turned off.
1. Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to
Component cable (Not supplied). This cable has a D-Sub connector on one end and three RCA jacks on the other.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-9.
2. Connect the [PC/DVI AUDIO IN] terminal on the back of the projector and the Audio out terminal on your AV device using an
audio cable (Not supplied).
Installation and Connection
2-16
2-17 Connecting using a Video/S-Video cable
First, Make sure that the AV device and your projector are turned off.
1. Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cable (Not supplied) or S-Video cable (Not
supplied).
- For supported input signal formats, see AV Timing (VIDEO/S-VIDEO) in section 2-9.
2. Connect the [AV IN R-AUDIO-L] terminal on the back of the projector and the Audio out terminal on your AV device using an
audio cable (Not supplied).
2-17
Installation and Connection
2-18 Connecting an External Speaker
You can hear sound through an external speaker instead of the internal speakers embedded in the projector.
1. Prepare an audio cable (Not supplied) suitable for your external speaker.
2. Connect the [AUDIO OUT] terminal of the projector to the external speaker using an audio cable.
- When using an external speaker, the internal speaker does not operate but you can adjust the volume of the external
speaker using the Volume button of the projector (or remote control).
- The [AUDIO OUT] terminal can output all audio signals.
Installation and Connection
2-18
2-19 Kensington Lock
A Kensington Lock (not supplied) is an anti-theft device that lets users to lock the product so that they can safely use it in public
locations. Because the shape and usage of the lock may differ depending on the model and the manufacturer, see the User
Manual supplied with the locking device for more information.
Locking the product
1. Loop the Kensington lock cable around an immovable part of desk or heavy object as directed in the Kensington lock user
manual.
2. Insert the locking part of the locking device into the Kensington lock hole in the projector.
3. Insert the Kensington lock key into the locking mechanism and turn it in the locking direction.
You can purchase the locking device from an electronics store or an online shop.
2-19
Installation and Connection
3
Using
3-1
Product Features
1. An optical engine adopting new LCD technology
•
1024 x 768 panel has been adapted.
•
Utilizes a 3P-LCD panel.
•
SP-L201 : Provides a bright screen of 2000 lumen.
SP-L221 : Provides a bright screen of 2200 lumen.
SP-L251 : Provides a bright screen of 2500 lumen.
•
Compact size, lightweight, and portable.
2. Minimized fan noise
•
Fan noise minimized through optimized internal air flow and the fan installation structure.
3. Multiple input terminals
•
Increases the connectivity to peripheral devices such as D-Sub 15P (supporting DTV signal), S-Video, Video, HDMI, etc.
4. Audio Output
•
Includes stereo speakers on the right and left and a 5-band equalizer.
5. User adjustments
•
Allows adjustment of each input port.
•
Has a reference pattern you can use for positioning and adjustment.
Using
3-1
3-2
Front, Upper
NAME
DESCRIPTION
- STAND BY (Blue LED)
1.Indicators
- LAMP (Blue LED)
- TEMP (Red LED)
Refer to the LED Indications.
2. Move
Volume
/ Select
/
/
button
: Use to move to or select an item within a menu.
: Use to adjust the volume.
3. MENU button
Use to display the Menu Screen.
4. SOURCE button
Use to select the external device signal.
5.
Button
Use to turn the projector on or off.
6. Lens
Use for Focus Adjustment.
7. Remote Control Signal
Receiver
-
8. Focus Ring
Use for Focus Adjustment.
9. Zoom Knob
Use to enlarge or reduce image size.
10. Lens cover
-
3-2
Using
3-3
Remote Control
1. POWER ( ) Button
Use this button for turning the product on and off.
2. AUTO Button
Adjusts the Picture automatically. (Available in < PC> Mode
Only)
3. MENU (
) Button
Used to display the Menu Screen.
4. Move (
)/ ( ) Buttons
Used to display the Menu Screen.
5. V. KEYSTONE Button (
)
Use this when the screen is displayed in a trapezoid shape.
6. INSTALL Button
Used to flip or reverse the projected image.
7. BLANK Button
This is used to turn off the video and audio temporarily.
The video and audio will come back on when any button other
than the [POWER] button is pressed.
8. P.SIZE Button
Used to adjust the size of picture screen.
9. QUICK Button
This is used to quickly return to the last menu used.
10. MUTE ( ) Button
Press to mute the sound temporarily. Press the MUTE button
again or the VOL button (
) when the sound is muted to
hear sound again.
11. RETURN ( ) Button
Returns to the previous menu.
12. EXIT ( ) Button
Used to make the Menu Screen disappear.
13. VOL (
) Button
Used to control the volume.
14. INFO Button
Used to check source signals, picture setup, PC screen
adjustment and lamp lifespan.
15. SOURCE Button
Used to check or select the connection status of external
devices.
16. P.MODE Button
Used to select Picture Mode.
17. STILL Button
Used to see still images.
Make sure to place your remote control on a table or desk.
If you step on the remote control, you may fall and hurt
yourself or damage the remote.
You can use the remote control up to a distance of about 23
feet (7 m) from the product.
Using
3-3
3-4
LED Indications
LED Indications
:Light is On
STAND BY
:Light is Blinking
LAMP
:Light is Off
TEMP
STATUS
If you press the [POWER] button on the remote control or projector, the screen
appears within 30 seconds.
The projector is operating normally.
The projector is preparing an operation after the [POWER] button on the projector or the remote control has been pressed.
The [POWER] button has been pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. (Operates for
about 3 seconds.)
The cooling fan inside the projector is not operating normally. Refer to Action 1
in Clearing Indicator Problems below.
The lamp cover protecting the lamp unit is not closed properly. Refer to Action 2
in Clearing Indicator Problems below.
The lens cover has not opened completely. Refer to Action 3 in Clearing Indicator Problems below.
The projector has changed to Cooling mode because it’s internal temperature
has increased beyond the maintenance limit.
Refer to Action 4 in Clearing Indicator Problems below.
The projector has turned itself off automatically because it’s internal temperature has increased beyond the maintenance limit. Refer to Action 5 in Clearing
Indicator Problems below.
A problem has occurred with the operation of the lamp. Refer to Action 6 below.
3-4
Using
Clearing Indicator Problems
CLASSIFICA
TION
STATE
MEASURES
Action 1
The cooling fan system is not
operating normally.
If the symptom remains even after disconnecting and then reconnecting
the power cord and turning the projector on again, contact your product
provider or our service center.
Action 2
The lamp cover protecting the
lamp unit is not properly closed
or the sensor system is not
operating normally.
Check if the screws on the side of the projector are securely tightened. If
they are and the indicators are still lit, contact your product distributor or a
service center.
Action 3
The lens cover has not opened
completely.
Open the lens cover completely.
If the lens cover does not open completely when the projector is operating,
both the video and audio turn off automatically.
If this status persists for ten minutes, the projector turns off automatically.
Action 4
The projector has changed to
Cooling mode because the
internal temperature of the projector has increased beyond
the maintenance limit.
If the internal temperature of the projector has increased beyond the maintenance limit, the projector changes to Cooling mode before turning off
automatically.
In Cooling mode, the fan speed is increased and the projector’s lamp is
changed to <ECO> mode.
Check whether the ventilation hole of the projector is blocked.
Check the air filter and clean if blocked.
Check whether the surrounding temperature of the projector is higher than
the standard temperature range of the projector.
Cool the projector sufficiently and operate it again.
Action 5
The internal temperature of the
projector has risen higher than
the limit, and the projector has
turned off automatically.
Check whether the ventilation hole of the projector is blocked.
Check the air filter and clean if blocked.
Check whether the surrounding temperature of the projector is higher than
the standard temperature range of the projector.
Cool the projector sufficiently and operate it again.
If the same problem occurs continually, contact your product distributor or
service center.
Action 6
The lamp has malfunctioned
after power turns off abnormally
or after powering on right after
turning off the projector.
Turn the power off, wait for a sufficient amount of cooling time and then
turn the power on to operate. If the same problem occurs continually, contact your product distributor or service center.
This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise,
which does not affect product performance and is part of normal operation.
Using
3-4
3-5
Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
MENU
SUB-MENU
Input
Source List
Edit Name
Picture
Mode
Size
Position
Digital NR
Overscan
Film Mode
PC
Zoom
Install
Lamp Mode
Auto Keystone
V-Keystone
Test Pattern
Video Type
Caption
Reset
Language
Menu Option
Sound
Filter Check
Time
Sleep Timer
Information
Setup
Option
Black Level
Background
Auto Power On
To access the Menu, press the Menu button on the product or on the remote. To move in the menu, press the arrow
buttons. Menu selections with an arrow on the far right have sub-menus. Press the right arrow button to access the submenu. Directions for navigating and selecting items in a menu are at the bottom of each menu screen.
3-5-1. Input
MENU
Source List
DESCRIPTION
You can select a device connected to the projector to display.
•
Edit Name
<PC>-<AV>-<S-Video>-<HDMI>
You can edit the names of devices connected to the projector.
•
<VCR>-<DVD>-<Cable STB>-<Satellite STB>-<PVR STB>-<AV Receiver>-<Game><Camcorder>-<PC>-<DVI Devices>-<TV>-<IPTV>-<Blu-ray>-<HD DVD>-<DMA>
3-5-2. Picture
3-5
Using
MENU
Mode
DESCRIPTION
Select a screen state which is customized to your projector or change the screen mode as required.
•
<Mode>
•
<Standard> : This picture mode is the most general mode and works well in most situations.
•
<Presentation> : This mode is suitable for presentations.
•
<Text> : This mode is suitable for text work.
•
<Movie> : This mode is suitable for viewing a movie.
•
<Game> : This picture mode is optimized for playing games.
The text in a still picture appears unnatural.
•
<User> : This mode is a customized mode created using the <Mode>→<Save> function.
Presentation and Text modes are only enabled if the input signal is a PC Timing (D-Sub/HDMI)
signal.
Each mode has separate controls for <Contrast>, <Brightness>, <Sharpness>, <Color>, etc.
When you access a mode and change (for example) the <Contrast>, you are changing the
contrast for that mode only.
•
<Contrast> : Used to adjust the contrast between the object and the background.
•
<Brightness> : Used to adjust brightness of the entire picture.
•
<Sharpness> : Used to adjust the sharpness of the picture.
When the input signal is PC Timing (D-Sub/HDMI), the <Sharpness> cannot be adjusted.
•
<Color> : Used to adjust color lighter or darker.
When the input signal is PC Timing (D-Sub/HDMI), the <Color> cannot be adjusted.
•
<Tint> : Used to obtain more natural color of objects using Green or Red enhancement.
When the input signal is PC Timing (D-Sub/HDMI) or PAL and SECAM in the [S-Video] or
[AV] modes, the <Tint> cannot be adjusted.
•
•
Size
<Color Temperature> : You can select the color temperature according to your preferences.
•
Factory defaults: <9300K>, <8000K>, <6500K>, <5500K>
•
You can select the color temperature for the items below according to your preferences.
<R-Gain>, <G-Gain>, <B-Gain> : Adjusts the color temperature of the White level.
<R-Offset>, <G-Offset>, <B-Offset> : Adjusts the color temperature of the Black level.
•
<Color Temperature>-<R-Gain>-<G-Gain>-<B-Gain>-<R-Offset>-<G-Offset>-<B-Offset>
<Gamma> : Changes the brightness characteristic for each color tone of an image.
•
The larger (+) the value, the greater the contrast of the bright and dark parts.
The smaller (-) the value, the darker the dark parts.
•
Adjustable range: -3 to +3
•
<Save> : You can save the status of a screen you adjusted according to your preferences using
the <Mode>→<User> OSD.
•
<Reset> : Restores the mode settings to the factory defaults.
You can select a screen size according to the type of scene.
When the input signal is PC Timing (D-Sub/HDMI), <Zoom1>/<Zoom2> is not supported.
•
Position
<Normal>-<Zoom1>-<Zoom2>-<16 : 9>
Adjust the screen position if it is not aligned.
To adjust, select the direction you want to move the screen, and then press the arrow button pointing
in that direction repeatedly.
Using
3-5
MENU
Digital NR
DESCRIPTION
When a dotted line is displayed or the screen shakes, you can view a better visual quality picture by
enabling Noise Reduction.
When the input signal is PC Timing (D-Sub/HDMI), <Digital NR> does not operate.
Black Level
You can select the signal black level according to the input signal. If it is unsuitable for the input signal, the dark parts may appear clearly or may be dim.
The <Black level> can only be set for the 480i and 576i RGB signals of [AV], [S-Video], and AV
Timing (D-Sub) modes.
•
•
Overscan
For [AV], [S-Video], and the 480i and 576i signals of AV Timing (D-Sub).
•
<0 IRE> : Sets the black level to <0 IRE>.
•
<7.5 IRE> : Sets the black level to <7.5 IRE>.
For the RGB signal of <HDMI> mode.
•
<Normal> : Used in a normal environment.
•
<Low> : Used when the dark part is shown too bright.
Using this function, you can cut the edge of the picture when unnecessary information or images
appear on the edge of the picture.
This is not supported in [AV] and [S-Video] modes.
This is supported only when the input signal is AV Timing (D-Sub) or AV Timing (HDMI).
If <Overscan> is turned off, unnecessary extra parts at the edges of an image may be shown.
In this case, turn <Overscan> on.
Film Mode
Using this function, you can set the display mode optimized for playing movies.
•
<Off>-<Auto>
<Film Mode> can only be supported for the [AV], [S-Video], 480i, and 576i of AV Timing (DSub) signals.
PC
Eliminates or reduces noise that causes unstable screen quality, such as screen shaking. If the noise
is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine
Adjustment again.
These functions are only enabled for the PC Timing (D-Sub/HDMI) input of the D-Sub terminal.
Refer to PC Timing (D-Sub/HDMI).
Zoom
•
<Auto Adjustment> : Used to adjust the frequency and phase of PC screen automatically.
•
<Coarse> : Used to adjust the frequency when vertical lines appear on PC screen.
•
<Fine> : Used to fine tune the PC screen.
•
<Reset> : Using this function, you can reset the PC menu settings to the factory default settings.
Enlarges the PC screen to 2X, 4X, or 8X.
This function is only enabled when the input signal is PC Timing (D-Sub/HDMI).
3-5
Using
3-5-3. Setup
MENU
Install
Lamp Mode
Auto Keystone
DESCRIPTION
To tailor the picture to the installation location, you can invert the projected images vertically / horizontally.
•
<Front-Floor> : Normal Image
•
<Front-Ceiling> : Horizontal/Vertical Reversed Image
•
<Rear-Floor> : Horizontally Reversed Image
•
<Rear-Ceiling> : Vertically Reversed Image
Used to set the image brightness by adjusting the amount of light generated by the lamp.
•
<Eco> : This mode is optimized for screens smaller than 100 inches.
This mode decreases the lamp brightness and power consumption in order to extend the lamp
lifetime and reduce noise and power consumption.
•
<Bright> : This mode maximizes the lamp brightness when the ambient illumination is bright. As
the brightness of the lamp increases, the lamp lifetime can be reduced and the noise and power
consumption may increase.
If video scenes are distorted or tilted, you can compensate for this by setting the <Auto Keystone>
function to <On> so that the <V-Keystone> function automatically starts.
•
V-Keystone
<Off>-<On>
If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone function.
The sound output of your projector is temporarily stopped while the keystone is being changed.
The keystone is not compensated for in the On Screen Display (OSD).
Background
You can set the Background that is displayed when there is no signal from the external device connected to the projector.If a signal is received, the Background you set disappears and a normal
screen is displayed.
•
Test Pattern
Using
<Logo>-<Blue>-<Black>
Generated by the projector itself. Use to optimize the installation of the projector.
•
<Crosshatch> : You can check whether the picture is distorted or not.
•
<Screen Size> : You can refer to picture format sizes such as 1.33 : 1 or 1.78 : 1.
3-5
MENU
Video Type
DESCRIPTION
If the screen quality is abnormal as a result of the projector not identifying the input signal type automatically in <PC> or <HDMI> mode, you can manually set the input signal.
In <PC> mode, <Video Type> is only enabled if the input signal is AV Timing (D-Sub). However,
for a separate H/V sync., <Video Type> is only enabled for the 1280 x 720p 59.94 Hz/60 Hz
signals.
In <HDMI> mode, <Video Type> is only enabled for the 640x480p 59.94Hz/60 Hz and
1280x720p 59.94Hz/60 Hz signals.
•
<Auto>-<RGB(PC)>-<RGB(AV)>-<YPbPr(AV)> : <PC> mode
•
<Auto>-<PC>-<AV> : <HDMI> mode
Usage
PC menu and
zoom
yniOwjP
~GGGyniGGGG
wjGGGkTzGG
k
l
yniOh}P
~GGGyniGGG
Gh}GGOz{iSGk}kSGˎPGGG
kTzGG
l
l
~GGGwwGGG
wwOh}P Gh}GGOz{iSGk}kSGˎPGGG
kTzGG
l
k
wj
~GGGwjGGGoktpG

k
l
h}
~GGGh}GGOz{iSG
k}kSGˎPGGGoktpGG
l
k
T
T
h
Caption
Color,
Sharpness,Tint
hG
The <Caption> function is supported when subtitles are contained in the external analog signal (from
either the Video or S-Video terminal).
The <Caption> function will not operate in <PC> (including components) or <HDMI> mode.
Depending on the external signal, a change to the channel or <Field> settings may be required.
Each <Channel> and <Field> contains different information. <Field><2> carries additional
information to supplement information contained in <Field><1>.
(e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided on
<Channel><2>.)
Reset
3-5
•
<Caption> : <Off>-<On>
•
<Mode> : <Caption>-<Text>
•
<Channel> : <1>-<2>
•
<Field> : <1>-<2>
Using this function, you can reset various settings to the factory default settings.
•
<Factory Default> : Changes the settings to the factory defaults.
•
<Reset Filter Time> : Resets the filter time.
Using
3-5-4. Option
MENU
DESCRIPTION
Language
You can select the language used for the menu screen.
Menu Option
•
<Position> : You can move Menu Position up/down/left/right.
•
<Transparency> : You can set the translucency of the menu.
•
<Display Time> : You can set the display time of the menu.
•
•
Sound
<5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-<Stay On>
Adjusts the right and left audio balance and equalizer of the 3W stereo speaker embedded in the projector.
•
Filter Check Time
<High>-<Medium>-<Low>-<Opaque>
<Balance>-<100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
Sets the check period for the filter. (Unit: hour)
•
<Off>-<100>-<200>-<400>-<800>
If the filter usage time is larger than the filter check period, the filter check message is
displayed for a minute whenever the projector is turned on.
Filter check message: "Check the filter, and if necessary, clean or replace it.".
Auto Power On
With Auto Power On, if power is supplied to the projector, it turns on automatically without your pressing the Power button.
•
Sleep Timer
<Off>-<On>
With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automatically.
(There must be no button input from the remote control or the top of the projector for the specified
time)
•
Information
Using
<Off>-<10 min>-<20 min>-<30 min>
You can check external source signals, picture setup, PC picture adjustment.
3-5
4
Troubleshooting
4-1
Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
Symptoms
Installation and
Connection
Menu and
Remote
Control
Troubleshooting
No Power.
Check the power cable connections.
I want to install my projector on the ceiling.
The ceiling installation support is sold separately. Contact your
local product distributor.
External Source can not be selected.
Be sure that the connection cable(s) (video) is properly connected to the proper port. If the device is not connected properly, it can not be selected.
Remote control does not work.
Be sure that the proper external source is selected.
Check the battery in the remote. If there is something wrong
with it, replace it with a new battery of the recommended size.
Be sure to aim the remote at sensor on the back of the unit and
at a distance of no more than approximately 23 feet(7 m).
Remove any obstacles between your remote control and the
product.
Direct light from 3-way light bulbs or other lighting devices on
the remote sensor of the projector may affect the sensitivity
and cause the remote control to malfunction.
Check if the remote control battery compartment is empty.
Check whether the LED indicator on the top of the projector is
turned on.
I cannot select a menu.
4-1
Check if the menu is displayed in gray. A gray-colored menu is
unavailable.
Troubleshooting
Symptoms
Screen and
External
Source
Cannot see picture images.
Troubleshooting
Be sure that the power cord of the projector is connected.
Be sure that the proper input source is selected.
Check that the connectors are properly connected to the ports
at the back of the projector.
Check the Remote Control batteries.
Be sure that the <Color> and<Brightness> settings are not at
their lower limit.
Poor color.
Adjust the <Tint> and <Contrast>.
Images are not clear.
Adjust the focus.
Check if the projector is too far from or too near to the screen.
Strange noise.
If a strange sound continues, contact your Service Center.
The operating LED is lit up.
Refer to Corrective Actions According to LED Indications.
Lines appear on screen.
On screen noise may occur when using your PC. Adjust the
frequency (refresh rate) of the screen.
No external device screen is displayed.
Check the operating status for the external device and check
whether the adjustment items, such as the <Brightness> and
the <Contrast> have been changed correctly in the <Mode>
command screen of the Projector menu.
Only a blue screen appears.
Be sure to properly connect the external devices. Check the
connection cables again.
Screen appears in black and white or odd
color or screen is too dark or bright.
As mentioned above, check the adjustment items such as
<Brightness>, <Contrast>, or <Color> in the menu.
If you want to restore various settings to their factory defaults,
run <Factory Default>from the menu.
Troubleshooting
4-1
5
More Information
5-1
Specifications
MODEL
Panel
Size
0.63" 3P LCD
Resolution
XGA (1024 x 768)
Aspect ratio
Power
Lamp
SP-L201
SP-L221
4:3
Power Consumption
270 W (Power off : Less than 0.5W)
Voltage
100~240V AC, 50/60Hz
Power Consumption
203W ( Eco : 172W )
Life Time
2,500 Hours (Eco : 3,000 Hours )
Dimension
291 x 289 x 127 mm / 11.46 x 11.38 x 5 inches
Weight
3.8 Kg / 10.2 lbs
Key Features
Input signal
Brightness
2,000 ANSI
Contrast
500:1
Screen Size (Diagonal)
Diagonal 40 inches ~ 300 inches
Projection Range
1 m ~ 10 m / 39.37 inches ~ 393.70 inches
Keystone
Vertical (±20°)
Zoom Adjustment
Manual
Focus Adjustment
Manual
Lens
F=1.65~1.93, f=18.5mm~22.5mm
Zoom Ratio
1:1.2
D-Sub 15p
Analog RGB, analog YPbPr
HDMI
Digital RGB, digital YCbCr
Mini DIN x 1
S-Video
RCA x 1
Composite video
Speaker
User Environment
SP-L251
2,200 ANSI
2,500 ANSI
3W x 2 (Stereo)
Temperature and Humidity
Operating : Temperature 41 °F ~ 95 °F (5 °C ~ 35 °C),
Humidity 20 % ~ 80 % (Non-condensing)
Storage : Temperature -14 °F ~ 140 °F (-10 °C ~ 60 °C),
Humidity 10 % ~ 90 % (Non-condensing)
Noise
Eco : 30dB, Bright : 32dB
This Class B equipment is designed for home and office use. The equipment has been registered regarding EMI for
residential use. It may be used in all areas. Class A is for office use. Class A is for business while class B emits less
electromagnetic waves than class A.
5-1
More Information
The LCD panel used in the LCD projector consists of hundreds of thousands of fine pixels. Like other video display devices,
the LCD panel may contain bad pixels which do not operate. When shipping a product, the conditions for identifying bad
pixels and the number of bad pixels that a LCD panel is allowed to contain are strictly managed in accordance with the
relevant specified standards by the LCD panel manufacturer and our company. Though a screen may have some dead
pixels, this does not affect the overall screen quality and the lifetime of the product.
More Information
5-1
5-2
RS-232C Command Table
Communication Format (Complies with the RS232C Standard)
•
Baud rate : 9,600 bps
•
parity : None
•
Data bits : 8, stop bit : 1
•
Flow Control : None
Serial Communication Protocol
1. Command Packet Structure [7bytes]
0x08
0x22
cmd1
cmd2
•
A command packet consists of 7 bytes in total.
cmd3
value
•
The two bytes 0x08 and 0x22 signify that the packet is for serial communication.
•
The following 4 bytes represent a pre-defined command that can be defined by the user.
•
The last byte is the checksum which checks the validity of the current packet.
•
Header [2 Byte]: Pre-defined values fixed to 0x08 and 0x22.
•
Cmd1 [1 Byte]: The first value of the code defined in the command list (Hexadecimal)
•
Cmd2 [1 Byte]: The second value of the code defined in the command list (Hexadecimal)
•
Cmd3 [1 Byte]: The third value of the code defined in the command list (Hexadecimal)
•
Value [1 Byte]: Input parameter for the command (Default: 0) (Hexadecimal)
•
CS [1 Byte]: Checksum (the 2’s complement of the sum of all the values except for the CS value.)
CS
2. Response Packet Structure [3 Bytes]
1. Success
0x03
0x0C
0xF1
0x0C
0xFF
2. Fail
0x03
•
When the received packet from an external device has a valid value, a Success packet is sent. Otherwise, a Fail
packet is sent.
•
A Fail packet is sent if:
•
•
The received packet length is not equal to 7 bytes.
•
The 2 byte packet header value is not equal to 0x08, 0x22.
•
The check sum is incorrect.
Failure detection by an external device
•
5-2
An external device classifies the packet as Fail if it does not receive a Success packet within 100ms.
More Information
Command Table
CONTROL ITEM
General
Power
Volume
Power
CMD1
Display OSD
/ Power On
0x00
Picture
Source List
Mode
2
Direct Power
Off
3
0x01
0x00
(0~100)
Up
0x01
0
Down
0x02
0
On
0x00
0x02
0x00
0x00
0
0x03
0x00
0x00
0
AV
AV
S-Video
1
0x01
0
S-Video
0x02
0
PC
PC
0x03
0
HDMI
HDMI
0x04
0
0x00
0
Standard
0x0A
0x0B
0x00
0X00
Presentation
1
Text
2
Movie
3
Game
4
User
5
Contrast
0~100
0X02
0x00
(0~100)
Brightness
0~100
0X03
0x00
(0~100)
Sharpness
0~100
0X04
0x00
(0~100)
Color
0~100
0X05
0x00
(0~100)
Tint (G/R)
G50 / R50
0x06
0x00
(0~100)
Color Temperature
9300K
0x0A
0x00
1
WB
More Information
0
Cancel
Off
Input
VALUE
1
Mute
Blank
0x00
CMD3
OK
Direct
Continuous
0x00
CMD2
8000K
2
6500K
3
5500K
4
R offset
0x0B
0x00
(0~100)
G offset
0x01
(0~100)
B offset
0x02
(0~100)
R gain
0x03
(0~100)
G gain
0x04
(0~100)
B gain
0x05
(0~100)
5-2
CONTROL ITEM
Picture
Gamma
-3~3
Save
Display OSD
CMD1
0x0B
Digital NR
CMD3
0x0C
0x00
(0~6)
0x0D
0x00
0
1
Cancel
2
Direct Save
3
Normal
0x0E
0x00
0
0x0F
0x00
0
Zoom1
1
Zoom2
2
16:9
3
Off
0x10
0x00
On
Black Level
0 IRE/NORMAL
0x11
0x00
Off
0x12
0x00
Off
0x13
0x00
UP
0x14
0x00
0
0x15
0x00
0
DOWN
fine
Up
1
0x16
0x00
DOWN
Reset
Zoom
x1
Display OSD
0
1
0x17
0x00
0
OK
1
Cancel
2
Direct Reset
3
0x18
0x00
0
x2
1
x4
2
x8
3
LEFT
5-2
0
1
Auto adjustment
Coarse
0
1
On
PC
0
1
On
Film Mode
0
1
7.5 IRE/LOW
Overscan
VALUE
OK
Reset
Size
CMD2
0x19
0x00
0
RIGHT
1
Up
2
Down
3
More Information
CONTROL ITEM
Picture
More Information
Horizontal
Position
Continuous
Vertical Position
Continuous
CMD1
LEFT
0x0B
CMD2
0x1A
CMD3
0x00
RIGHT
DOWN
Up
VALUE
0
1
0x1B
0x00
0
1
5-2
CONTROL ITEM
Setup
install
Lamp Mode
CMD1
F-F
0x0C
CMD2
0x00
CMD3
0x00
Background
Test Pattern
Video Type
Reset
1
R-F
2
R-C
3
ECO
0x01
0x00
-50~50
Auto Keystone
Off
0x02
0x00
(0~100)
0x02
0
On
Logo
1
0x03
0x00
0
Blue
1
Black
2
Crosshatch
0x04
0x00
0
Screen size
1
Pattern Off
2
Auto
0x05
0x00
0
RGB(PC)
1
RGB(AV)
2
YCbCr(AV)
3
PC
4
AV
5
Factory
Default
Caption
Display OSD
0x06
0x00
Mode
1
Cancel
2
Display OSD
0x01
1
Cancel
2
Off
0x07
0x00
Caption
1
1
2
0
1
0x01
0
1
0x02
2
Field
0
Ok
Text
Channel
0
Ok
On
5-2
0
1
V-Keystone
Reset Filter
Time
Caption
0
F-C
Bright
Keystone
VALUE
0
1
0x03
0
1
More Information
CONTROL ITEM
Option
Language
Menu Option
English
0x0D
CMD2
0x00
CMD3
0x00
VALUE
0
Deutsch
1
Nederlands
2
Español
3
Français
4
Italiano
5
Svenska
6
Português
7
Русский
8
中国语
9
한국어
0A
Türkçe
0B
ไทย
0C
Position
Transparency
Display Time
More Information
CMD1
LEFT
0x01
0x00
0
RIGHT
1
UP
2
DOWN
3
High
0x02
0x00
0
Medium
1
Low
2
Opaque
3
5 sec
0x03
0x00
0
10 sec
1
30 sec
2
60 sec
3
90 sec
4
120 sec
5
Stay On
6
5-2
CONTROL ITEM
Option
SOUND
Balance
CMD1
Up
0x0D
CMD2
0x04
CMD3
0x00
Down
100Hz
Up
0x01
Up
0x02
Up
0x03
Up
0x04
Up
0x05
0
1
0x05
0x00
0
100
1
200
2
400
3
800
4
Auto Power
ON
OFF
Sleep Timer
OFF
Information
5-2
off
0
1
Down
Filter Check
Time
0
1
Down
10KHz
0
1
Down
3KHz
0
1
Down
1KHz
0
1
Down
300Hz
VALUE
0x06
0x00
ON
0
1
0x07
0x00
0
10 min
1
20 min
2
30 min
3
0x08
0x00
0
More Information
5-3
Contact SAMSUNG WORLDWIDE
•
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG(726-7864)
http://www.samsung.com/us
CANADA
1-800-SAMSUNG(726-7864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG(726-7864)
http://www.samsung.com/mx
LATIN AMERICA
ARGENTINA
0800-333-3733
http://www.samsung.com/ar
BRAZIL
0800-124-421
http://www.samsung.com/br
4004-0000
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
COLOMBIA
01-8000112112
http://www.samsung.com/co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
HONDURAS
800-7919267
http://www.samsung.com/latin
JAMAICA
1-800-234-7267
http://www.samsung.com/latin
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
EUROPE
AUSTRIA
0810 - SAMSUNG(7267864,€ 0.07/min)
http://www.samsung.com/at
BELGIUM
02 201 2418
http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr
(French)
CZECH REPUBLIC
800 - SAMSUNG (800-726786)
http://www.samsung.com/cz
DENMARK
8 - SAMSUNG (7267864)
http://www.samsung.com/dk
EIRE
0818 717 100
http://www.samsung.com/ie
FINLAND
30 - 6227 515
http://www.samsung.com/fi
FRANCE
01 4863 0000
http://www.samsung.com/fr
More Information
5-3
EUROPE
GERMANY
01805 - SAMSUNG (7267864,€ 0.14/
Min)
http://www.samsung.de
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com/hu
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com/it
LUXEMBURG
02 261 03 710
http://www.samsung.com/lu
NETHERLANDS
0900 - SAMSUNG (0900-7267864) (€
0,10/Min)
http://www.samsung.com/nl
NORWAY
3 - SAMSUNG (7267864)
http://www.samsung.com/no
POLAND
0 801 1SAMSUNG (172678)
http://www.samsung.com/pl
022 - 607 - 93 - 33
PORTUGAL
808 20 - SAMSUNG (7267864)
http://www.samsung.com/pt
SLOVAKIA
0800-SAMSUNG(726-7864)
http://www.samsung.com/sk
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com/es
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com/se
SWITZERLAND
0848-SAMSUNG(7267864, CHF 0.08/
min)
http://www.samsung.com/ch
U.K
0845 SAMSUNG (7267864)
http://www.samsung.com/uk
CIS
BELARUS
810-800-500-55-500
ESTONIA
800-7267
http://www.samsung.com/ee
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.com/lt
MOLDOVA
00-800-500-55-500
KAZAKHSTAN
8-10-800-500-55-500
KYRGYZSTAN
00-800-500-55-500
RUSSIA
8-800-555-55-55
TADJIKISTAN
8-10-800-500-55-500
UKRAINE
8-800-502-0000
http://www.samsung.com/kz_ru
http://www.samsung.ru
http://www.samsung.com/ua
http://www.samsung.com/ua_ru
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com/au
CHINA
400-810-5858
http://www.samsung.com/cn
010-6475 1880
HONG KONG
3698 - 4698
http://www.samsung.com/hk
http://www.samsung.com/hk_en/
INDIA
3030 8282
http://www.samsung.com/in
1-800-3000-8282
1800 110011
5-3
More Information
ASIA PACIFIC
INDONESIA
0800-112-8888
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com/jp
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com/nz
PHILIPPINES
1-800-10-SAMSUNG(726-7864)
http://www.samsung.com/ph
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com/sg
THAILAND
1800-29-3232, 02-689-3232
http://www.samsung.com/th
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com/vn
MIDDLE EAST & AFRICA
SOUTH AFRICA
0860-SAMSUNG(726-7864)
http://www.samsung.com/za
TURKEY
444 77 11
http://www.samsung.com/tr
U.A.E
800-SAMSUNG(726-7864)
http://www.samsung.com/ae
8000-4726
More Information
5-3
5-4
Correct Disposal - Europe only
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product - Europe only
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg,
Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
5-4
More Information

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project