Dental-

Information

S i r o n a D e n t a l S y s t e m s ‚ F a b r i k s t r a s s e 3 1 ‚ D - 6 4 6 2 5 B e n s h e i m

August 2005

The topics in this issue:

Seminar and training dates

Training for dental sales representatives

Treatment centres

C8 + /ProFeel + : instrument foot switch now available as a repair-exchange part

M1/E: test certificate for amalgam separator no longer required

M1, model 94: changes to the range of spare parts

Patient communication

New version of the SIVISION PC software

Handpieces

ImplantSystem: software update version 2.01

Hygiene

Sirona DAC Universal

HYGIENE CENTER: repair-exchange

CAD/CAM

inLab marketing package now available

New power supply for the milling unit

Delivery times

Status: August 2005

Page 4

Page

Page

Page

Page 7

Page 8

Page

Page

Page

Page

9

12

13

14

Page 15

5

5

6

A 08/2005 − Page 2 August

Topics covered in previous issues

General

Diagnostic system

Credits

General conditions of sale

Price lists

Paintwork and upholstery colours

Quality of products and services

Seminar and training dates

05/05, p. 4; 06/05, p. 3

Treatment centres

General

E generation

+ M1/M1

C1 +

C2

C3

+

+

C4 + /C4 + cart version

C5 +

C6 (outside Germany)

C8/C8 +

ProFeel/ ProFeel

Tray

+

SIROLUX S/Fantastic

Chairs

Patient communication

General

SIROCAM

SIVISION

Handpieces

General

High-speed handpieces

T1 TITAN

T1 LINE

T1 CLASSIC

T2 REVO

SIROSON L

SIROSON S

SIROSONIC

SIROSONIC L

SIROPRO

SIROTOM S

SPRAYVIT

SIRONA motors

SIRONiTi/SIRONiTi starter kits/ SIRONiTi Air +

ImplantSystem

Sterilizers/care systems

General

DAC Universal

HYGIENE CENTER

VALIDATOR Plus

01/05, p. 3; 05/05, p. 5; 06/05, p. 4; 07/05, p. 4

06/05, p. 5; 07/05, p. 5; 08/05, p. 5

01/05, p. 4; 06/05, p. 7

05/05, p. 6; 06/05, p. 5; 08/05, p. 5

01/05, p. 4; 06/05, p. 5

06/05, p. 5

06/05, p. 5

06/05, p. 5; 07/05, p. 4

06/05, p. 5

05/05, p. 7

01/05, p. 4; 06/05, p. 5; 08/05, p. 5

01/05, p. 5; 05/05, p. 6; 06/05, p. 5; 08/05, p. 5

05/05, p. 8

05/05, p. 10; 06/05, p. 8; 08/05, p. 7

05/05, p. 11; 06/05, p. 8

01/05, p. 6; 05/05, p. 10; 06/05, p. 8; 08/05, p. 7

01/05, p. 8; 07/05, p. 6; 08/05, p. 8

07/05, p. 6

01/05, p. 7

07/05, p. 6; 08/05, p. 8

05/05, p. 12; 08/05, p. 9

08/05, p. 9

08/05, p. 12

SIROCLAVE B/VS/S

SIROMINI

SIROSEAL

SIROCLEAN

X-ray

General

HELIODENT DS

Vario HELIODENT

ORTHOPHOS 3

ORTHOPHOS 3 Ceph

ORTHOPHOS 3 DS

01/05, p. 10; 05/05, p. 13; 06/05, p. 9

05/05, p. 13

ORTHOPHOS 5

ORTHOPHOS Plus

ORTHOPHOS Plus Ceph

ORTHOPHOS Plus DS

ORTHOPHOS Plus DS Ceph

SIDEXIS/SIDEXIS XG

USB Box

ORTHOPHOS XG Plus/Ceph Digital

01/05, p. 9; 05/05, p. 13; 06/05, p. 9

01/05, p. 9

05/05, p. 13

CEREC

General 01/05, p. 14; 08/05, p. 14

Software

Training

CEREC 2

CEREC 3 01/05, p. 14

CEREC

CEREC inLab

Scan

Link

01/05, p. 14

General 01/05, p. 13; 06/05, p. 10; 08/05, p. 13 inLab 01/05, inEos 01/05, p. 10; 06/05, p. 10

A 08/2005 − Page 3 August

Seminar and training dates

Training for dental sales representatives

The dates of upcoming training courses are shown in the following table. For further details about the content and goals of the individual courses, please refer to our brochure

“Training Program for Business Partners 2004/2005”.

Basic training Advanced training

Your introduction to the Sirona product portfolio

The fast track to sales success

Treatment centres, handpieces and hygiene systems

X-ray systems (conventional and digital)

29 – 30 August 2005

31 August – 1 September 2005

19 – 20 September 2005

21 – 22 September 2005 inLab 2 September 2005 –

A 08/2005 − Page 4 August

Treatment centres

C8

+

/ProFeel

+

: instrument foot switch now available as a repair-exchange part

With immediate effect, the instrument foot switch is now available as a repair-exchange part. Irrespective of which foot switch you send in, you will receive in exchange the new version with the built-in spray indicator (which is fitted as standard to all new foot switches).

Customers who own a foot switch without a spray indicator have the option of upgrading to the version with a spray indicator at cost price. To this end, we can supply the repair-exchange foot switch (REF. 60 55 649, Pr. Gr. 38) at a special price of

EUR 328.00, excl. VAT. This offer closes on 31 December 2005. The full price will be charged in the case of orders received after this date.

M1/E: test certificate for amalgam separator no longer required

As from August 2005, an amalgam separator test certificate will no longer be supplied together with the following products:

Drive AA2, repair-exchange REF. 33 17 653

REF. 33 20 475 Repair-exchange kit AA2

Previously, it had been necessary to leave a new test certificate in the dental practice in the event of an exchange. This is no longer necessary. The original test certificate remains valid. If you nonetheless require a new test certificate (REF. 33 33 692), please contact our Customer Service Centre.

A 08/2005 − Page 5 August

M1, 94 model: changes to the range of spare parts

The following cover components for the water unit are no longer available:

Designation REF.

Cover, front, coloured

Cover, rear, coloured

Cover (set), coloured

58 94 738

58 94 720

59 14 833

Cover (set), structured

Cover (set), A2S

59 28 437

59 63 327

As an alternative, we can supply the cover set for the 96 model of the M1. The following accessories plus the lower section of the automatic separator must be ordered and installed in addition.

Qty. Designation

1

1

REF.

Cover set for M1 96 water unit, grey-white finish 29 53 164

Alternative: Cover set for M1 96, paint finish.

Please specify the colour shade!

29 56 936

1 Finger protector

1 Angle bracket

1 Spacer pin

3 Threaded bolts

3 Threaded pieces

1 Countersunk screws

3 Spacing tube

1 Lower section of automatic separator

59 66 981

29 57 009

59 16 267

29 56 688

29 56 696

34 23 647

33 80 623

29 53 180

A 08/2005 − Page 6 August

Patient communication

New version of the SIVISION PC software

Version 014 of the SIVISION PC software (REF. 58 85 632) includes two new Windows monitor drivers:

• Driver for “3” monitor (REF. 59 72 034)

The driver for the new “3” monitor (REF. 59 72 034), which went on sale at the beginning of the year, has now been included in our driver file. During the installation process, the monitor is identified as “59 72 034 D3399”. The quick fix recommended in March (i.e. installation of the driver for the monitor “59 72 000 D3399”) can be dispensed with.

• Driver for 19" Monitor (REF. 60 30 634)

The driver file already includes the driver for the new 19" monitor (REF. 60 30 634).

Deliveries of this monitor are scheduled to commence in August 2005. During the installation process, the monitor is identified as "60 30 634 D3481”.

Further information about installation and configuration is contained in the relevant installation instructions (REF. 59 11 321). These instructions are also available on the

CD.

A 08/2005 − Page 7 August

Handpieces

ImplantSystem: software update version 2.01

For technical reasons, contra-angle handpieces differ in terms of their power output.

There are two possibilities for ensuring the right torque at the preparation site:

1.) Calibration of a predetermined torque setting on the drive unit.

2.) The deployment of a software program which is specifically adapted to the handpiece (ImplantSystem).

The torque setting on the ImplantSystem can be guaranteed in combination with the following handpieces:

Handpieces with the gear ratio 1:1

ATR-20S (the 20:1 handpiece so far supplied by ATR)

IMPLANT 20:1

IMPLANT 80:1

For this reason, we have changed the step-down setting options on the control panel

(“Reduction” key) as follows:

1:1

20s:1 for ATR-20 S

20i:1 for IMPLANT 20:1

80:1 for IMPLANT 80:1

IMPLANT handpieces

The drive unit (e.g. ImplantSystem) and the handpiece (e.g. IMPLANT) must be seen as an integrated system. For this reason, each handpiece is accompanied by the following information:

“To fulfill the requirement for the correct torque at the bur, please check if your unit can be used with handpieces of Sirona (IMPLANT 20:1, IMPLANT 80:1) or ATR (ATR-20i,

ATR-80i). For this purpose a software update may be available so far the software is not already installed. Please have a look to the user manual if the handpieces are listed or check the software version which should be 2.01 or higher.

The handpieces are tested with the following units:

ATR ATR

ATR ATR 5000 Plus

ATR ImplaNiti

Sirona ImplantSystem

5000

For further information, please contact your local dealer or the manufacturer of the unit.”

A 08/2005 − Page 8 August

Hygiene

Sirona DAC Universal

The DAC Universal is a multifunctional autoclave system for the cleaning, sterilization and lubrication of straight, contra-angle and high-speed handpieces in a single operation.

Deliveries will commence in the 34th calendar week.

According to the recommendations of the Robert Koch Institute, dental handpieces should be categorized as semi-critical/critical medical products. As they contain voids, dental handpieces are difficult to clean and sterilize. For this reason, Class B autoclaves with a multi-stage pre-vacuum are the recommended method of sterilization. However, the prolonged sterilization cycle – coupled with the labour-intensive and error-critical manual cleaning and lubrication of the handpieces – has a negative impact on practice workflows. This also entails significant investment and maintenance costs.

The DAC Universal eliminates these problems. It takes a mere 12 minutes to clean, lubricate and sterilize six dental handpieces. The DAC Universal is a Class S sterilizer conforming to EN 13060 and has been certified and validated by the Danish State

Hygiene Institute.

The Robert Koch Institute recommends the automated processing of handpieces as a way of eliminating errors and cross-contamination risks for patients and staff.

A 08/2005 − Page 9 August

The DAC Universal is geared to a broad spectrum of different configurations (see diagram).

Take this opportunity to create a seamless infection control chain in the dental practice.

The DAC Universal is equipped with:

• an instrument holder including 6 adapters (the specific adapter type must be specified at the time of ordering)

• 1 container of care concentrate

• Installation set with waste water container, compressed air connection and air filter

DAC Universal, REF. 60 51 630, EUR 5,490.00, excl. VAT, Pr. Gr. 92

Technical specifications:

Energy supply

Water (for sterilization and disinfection)

Consumption

Air connection (dry air)

Dimensions

Water container

Oil container

Documentation

Weight

90 – 250 V, 50/60 Hz, approx. 1,100 W

Demineralized water, max. 3.0 µS

Approx. 330 ml per cycle < 3.0 µS

In the event of inadequate water quality,

(> 3.0 µS/cm) an error message is shown on the display

Input pressure: 5.0 – 8.0 bar

Max. short-term air consumption: approx. 90 Nl/min. at 5 bar

H = 350/600 mm, W = 360 mm,

D = 370 mm +100 mm

2 litres

250 ml

Standard RS 232 interface

Approx. 27 kg

A 08/2005 − Page 10 August

Accessories:

Adapters for turbines

Sirona turbine adapter, complete

KaVo turbine adapter, complete

W&H turbine adapter, complete

W&H turbine adapter – US model, complete

Bien Air turbine adapter, complete

Castellini turbine adapter, complete

NSK Phateleus adapter, complete

NSK VIP II/Pana QD adapter, complete

Lares turbine adapter, complete

Midwest Q-coupler adapter, complete

Midwest adapter, complete

Midwest XGT/Stylus adapter, complete

STAR swivel adapter for Star motor, complete

STAR attachment adapter, complete

Morita PAR-DI turbine adapter, complete

Morita PAR-O turbine adapter, complete

60 51 697

60 51 655

60 51 671

60 51 689

60 51 713

60 51 762

60 51 804

60 51 812

60 51 838

60 51 846

60 51 853

60 51 879

60 51 887

60 51 895

60 51 911

60 51 929

Yoshida turbine adapter, complete

Micro-Mega turbine adapter, complete

60 51 937

60 51 945

Borden adapter, 2/3 hole, complete 60 51 861

Adapters for straight and contra-angle handpieces:

INTRAmatic® adapter with push-button, complete 60 51 648

Sirona TE/Classic adapter, complete

KaVo/Bien Air adapter, complete

60 51 705

60 51 663

Midwest adapter for Rhino/Shorty, complete 60 51 903

Care concentrate

Water softening tablets (100 pcs.)

Printer for DAC Universal

(for documenting the sterilization cycles)

Printer ribbon (2 cartridges)

Printer paper (5 rolls)

Basket with cover, complete

Additional basket (without cover)

Additional cover (without adapters)

Holder for cover

Holder for indicator

Spore tester

41 72 800

97.00

97.00

97.00

97.00

80.00

60 53 842 21.00

60 51 770 468.00

58 77 274

58 77 266

40.00

35.00

60 51 754 398.00

60 51 796 198.00

60 51 739 477.00

60 51 747 218.00

60 51 788 27.00

60 51 820 107.00 excl. VAT

Pr. Gr.

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

97.00

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

92

94

94

92

94

94

94

94

94

94

94

94

A 08/2005 − Page 11 August

HYGIENE CENTER: repair-exchange

With effect from February 2006, we will discontinue the repair-exchange service for the

Hygiene Center:

HYGIENE CENTER 230 V, German

HYGIENE CENTER 230 V, English

HYGIENE CENTER 230 V, French

We will of course continue to provide individual repairs as well as spare parts for this product.

Rep.-REF. 51 75 505

Rep.-REF. 51 75 752

Rep.-REF. 51 75 760

A 08/2005 − Page 12 August

CAD/CAM

inLab marketing package now available

The new marketing package for inLab users offers dental laboratories a unique opportunity to professionalize their communication efforts aimed at dentists.

The marketing package (format: A5) consists of various brochures devoted to specific clinical indications, material data sheets, a corporate image brochure, as well as a presentation folder and a documentation CD.

Consisting of several pages in each case, the four illustrated ‘indication brochures’ discuss the possibilities for fabricating polymer anterior crowns monoblock anterior and premolar crowns, as well as crowns and bridges .

The three data sheets deal with

, all-ceramic inlays/onlays/veneers , fine-structured all-ceramic materials, InCeram framework ceramics and zirconium oxide framework ceramics respectively . The emphasis is on the specific advantages of these materials as well as information relating to bonding methods.

The package also includes a sample corporate image brochure, with the help of which the inLab user can create his own “business card” containing specific information about his laboratory (company logo, corporate philosophy, special skills, location, address, etc.).

The presentation folder contains detailed information about the aesthetics, biocompatibility and clinical reliability of all-ceramic restorations created with the help of the Sirona CAD/CAM system. The folder has transparent pockets for leaflets, brochures, etc. which the laboratory would like to pass on to the dentist.

The CD brings together all the component parts of the marketing package in an electronic form – in PDF format for viewing on the PC and in QuarkXPress format. The latter permits the laboratory to individualize the documents before passing them on to an external printing company. The CD also contains the program Acrobat Reader (necessary for viewing the PDF documents on a PC).

In addition, the CD includes three sample letters in Word format, which the laboratory can adapt and then send to selected dentists. The CD sleeve booklet presents detailed information about how to create individually tailored information material relating to the dental laboratory.

In future, a sample copy of the marketing package will be supplied together with each inLab system. The package will also be sent subsequently to existing inLab users.

A 08/2005 − Page 13 August

CEREC 3, CEREC Scan, inLab

New power supply for the milling unit

With effect from serial no. 15,500 the CEREC 3, CEREC be fitted with a new power supply. The new power supply will be included in the next issue of the spare parts list for CEREC 3, CEREC details are as follows:

Scan,

Scan and inLab milling units will

inLab and CEREC 3D. The ordering

Designation REF. EUR, excl. VAT Pr. Gr.

Power supply 60 50 012 420.00 29

If required, the latest version of the price list can be downloaded directly from the Sirona dealer log. The link is as follows: https://partner.sirona.com/d/ecomaXL/index.php?site=SIRONA_HB_dl_tu_cerec_cerec3

A 08/2005 − Page 14 August

Delivery times

Status: August 2005

To help you plan more effectively, we provide you with this list of delivery times, updated on a monthly basis. The quoted delivery times are calculated as from the receipt of your order at the Bensheim factory.

To avoid delays, please make sure that you submit all the required information when placing your orders.

Subsequent changes to orders can lead to corresponding shifts in the delivery times.

Please pass this information on to the persons responsible in your company.

Treatment centres

C2 + /C3 + /C4

M1 +

C8 +

ProFeel +

+ /C5 + weeks

4 weeks weeks

C chair

SIROLUX Fantastic light (all models)

Accessories for treatment centres

3

1−2

1−2 weeks weeks weeks

Handpieces (high-speed, straight, contra-angle)

T1 CLASSIC

T1 LINE

T1/T2/T3 high-speed handpieces

ProSmile Handy

SIROAIR L

SIRONiTi/SIRONiTi starter kits

2–4

2–4

2–4

2

2

2 weeks weeks weeks weeks weeks weeks

Sterilizers/care systems

DAC Universal – as from commencement of deliveries 2–3 weeks

SIROCLAVE B

SIROCLAVE VS

SIROCLAVE S

SIROMINI B

SIROSEAL

SIRODEM

2−4

2−3

2−3

2−3

1−3

1−3 weeks weeks weeks weeks weeks weeks

SIROCLEAN 2–3 weeks

X-ray

HELIODENT DS

HELIODENT Vario 3

ORTHOPHOS 3/Ceph

4

8 weeks weeks weeks

ORTHOPHOS Plus/Ceph

ORTHOPHOS XG 5 DS/Ceph (refer to certification)

ORTHOPHOS XG Plus DS/Ceph (basic and fully featured version)

SIDEXIS (wall box/X-ray box)

8

8

6

4 weeks weeks weeks weeks

SIDEXIS USB Box

IO sensors

Available only in selected markets:

ORTHOPHOS 3 DS

ORTHOPHOS Plus DS/Ceph

CAD/CAM

CEREC 3

CEREC Scan inLab inEos

4

4

8 weeks weeks weeks

8–10 weeks

3–5 weeks

3–5 weeks

3–5 weeks

8–10 weeks

The delivery times relate to the current standard colours (grey-white).

In the case of combined orders of equipment with different delivery times, you should be guided by the longest delivery time. Depending on the day-to-day situation, the delivery times may be shorter or longer.

The delivery date confirmed by us will apply. In urgent cases, please contact our Customer Service Centre.

A 08/2005 − Page 15 August

For further information, please contact our

Customer Service Centre:

Telephone:

•

+49 / 62 51 / 16-16 16

E-mail and fax:

•

Product services

E-mail: [email protected]

Fax: +49 / 62 51 / 16-18 18

•

Order services

E-mail: [email protected]

Fax: +49 / 62 51 / 16-17 17

A 08/2005 − Page 16 August