Advertisement
Advertisement
Oitttidtid b of,LB
D b
i6lid,x
Catalogue
1.
Productor Features
1.
Productor Features
2.
Projector
Brief
3.
Safeguards
4.
Warning
2.
Projector Overview
'1.
Top view
2.
Bottom view
3.
Front view
4.
Back view
5.
Rearview
3.
Operationintroduction
1. connecting the projector
2.
Power on/Offthe projector
4.
Menu operation
5.
User's maintenance
1.
Cleaning the lens
2.
Cleaning the Projector Housing
3,
Cleaning the Fliter Cover
4.
Replacing the Lamp
5.
Simple repair and solution
6.
Parameter and function
1.
Technicalspecification
2.
Main functions
IVofes
on
the
AC Power Cord
AC
Power Cord must meet the requirement of countries where you use this projector.Please confirm yourAC plug type with the graphics below and ensure that the properAC
Power Cord is used.
s-------;;t
[@]
[,"ift#;#
R-------r;l lN,.9
|
N*J lT sl ffi
|
\,-,1
| l\r/l
lntroduction
Projector
Features
The projector offers the following features
$
U
,]J
.:t;:
-;ri:
'lJ s
'
&
$ rg t
o&it*0&*i*r&B&ti&&
!
Single chip LCD technology
D High performance LED lamp (with 50,000 hrs life) tr
WXGA(1280x768 pixels native, suppori 1280-800,1280X1024 and
'1366x768)
!
compression compatibility for VGA, SVGA, XGA and SXGA
ll
lnput source USB/SD/3'HDMUAV r'GA,/S-VIDEO/ComponenUDTV(HD digital TV)
!
User-friendly, multFlanguage on-screen display
!
keystone correction tr
With
USB,SD Slot tr HD digital Tv(dvb{).
lmportant safeguards
Please read all these instructions regarding your Led projector and retain them for future reference. Follow all wamings and instructions marked on the Led projector.
1. Read instructions
All ths safety and operating instructions should be read before the appliance is opsrated.
2.
Retain instructions
The safety and operating instructions should be retained for future reference.
3.
Wamings
All warnings on the appliance and in the operating insfiuctions should be adhered to.
4. lnstructions
All operating instructions must be followed.
5. Cleaning
Unplug this projector from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
6.
Attachments and equipment
Never add any attachments and/or eqdpmenl without the approval ofthe manufacturer as such additions may result in the risk offire, electric shock or other personal injury
7. Waler and moisture
Do not use this projec'tor near water or in conlact with water.
8. Accessoribs
Do not placs this projector on an unstable cart,stand, tripod, bracket or table. Use only with a cart, stand, tripod bracket, or table
.
10.
Porer sources
This proiector should be operated only from the type of povver source indicated on the marking label. lf you are not sure of the type of power,please consult your appliance dealer or local power company.
1
1. Power-cord protection
Power-supply cords should bs routed so that they are not liksly to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and poinb where they exit from the appliance. Do not put the power cord under a carpet.
12. Ovedoading
Do not overload wall outlels and extension cords as this can result in a fire or electric shock.
13. Objecb and liquids
Never push objects of any klnd through openings of this projector as thoy may touch dangerous voltage points or short-out parb that could result in a flre or electric shock. Never spill liquid of any kind on th6 projector.
14. Servicing
Do not attempt to service this projector yourself.Refer all s€rvicing to qualified seMce personnel.
15. Oamage requking seruice
Unplug this projector from the wall outlet and refer servicing to qualllied service personnel under the following conditions:
,,.
ffi
agt ttt&m4fx&eMbuo,
(a) lf the power-supply cord or plug is damaged.
(b) lf liquid has been spilled, or objects have fallen into the projector.
(c) lf the prcjector does not operate normally ater you follow the operating instructions.
Adjust only those controls that are covered by the operating instructions. An improper adjustment of other controls may result in damage and may often require extensive work by a qualilied technician to restore the projector to its normal operation.
(d) lf the prcjector has been exposed to rain or water.
(e) lf the proJector has been dropped or the cabinet has been damaged.
(f) lf the projector exhibits a distinct change in performance - this indicates a need for service.
'16.
Replacement parts
When replaement parts are required, be sure that the service lechnician has used replacement parts specilied by the manufacturer or parts having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
17. Safety check
Upon completion of any service or repair to this projector, ask the seruice technician to perform safety checks determining that the projector is in a safe operating condition. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.
18.
Ventilation
Slots and openings in the cabinet are provided for ventilation, ensuring reliable operation of the projector and to protect it from overheating. i
Do not block these openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or bookcase. Ensure that there is adequate ventilation and that the manufacture/s inshuctions have been adhered to.
f
qpqt4ainid.I&DWaeb
Clean the air-fllter frequently. lf the filter or ventilation slots become clogged with dirt or dust, the temperature inside of the projector may rise and cause some troubles, such as damage of inside parts, and shortening the Iife of panel.
Do not look into the air outlet gillle when projector is operating.
Heat, dust etc. may blow out of it and hurt your eyes.
Placo of installation
For safetys sake, refrain from setting the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.
.
Operating temperature: between
+41T
(+5C)and
+95T
(+35C)
.
Operating humidity: between 30% and g0%
.
Never put any healproducing device under the projector so that the projector does not overheat.
.
Do not attach the projector to a place that is unstable or subject to vibration.
'
Do not install the projector near any equipment that produces a strong magnetic field.
Also refrain from installing near the prcjector any cable carrying a large ouffent.
'
Place the projector on a solid, vibration free surface: otherwise it may fall, causing serious injury to a child or adult, and serious damage to the product.
.
Do not stand the prciector: it may fall, Gusing serious injury and damage to the prcjector.
'
Slanting the projector more
than
1o"(right and left) or
15' (front and rear) may cause trouble or explosion of the lamp.
'
Do not place the projector near air-conditioning unit or heater to avoid hot air to the exhaust and ventilation hole of the projector.
Projector Overview
Top view
WARNING.'
Unplug immediately if there is something wrong with your projector.
Do not operate if smoke, strange noise or odor comes out of your prcjector. lt might euse fire or electric
:
I]
.:t
Never remove the cabinet. lll
This projector contains high voltage circuitry.
An inadvertent contact may result in an eleckic shock.Except as specifically explained in the
'
'
Owner's Guide, do not attempt to service this product yourself. Please contact your dealer when you want to fix, adjust or inspect the projector.
Do not modify this equipment.
It can lead to fire or electric shock.
lf you break or drop the cabinet.
'11
Do not keep using this equipment if you break or drop it. Unplug the proiector and contract your dealer for inspection. lt may lead to fire if you
...:
;r keep using the equipment.
1
Do not face the proiector lens to the sun,
It can lead to fire.
Use
corect
voltage.
lf you use incorect voltage, it can lead to fire.
Do not place the projector on uneven surface.
Place the projection on a leveled and stable surface only. Please do not place equipment on unstable surfacss.
Do not look into the lens when it is operating. lt may hurt your eyes.Never let children look into the lens when it is on.
Do not turn off the main power abruptly or unplug the prorector during operation.
,ll'
It can lead to lamp breakage, fire, electric shock or other trouble. lt is best to wait for the fan to turn off before turning main power off.
-,1
Do not touch Alr outlet grille and Bottom plate whlch becomes hot.
Do not touch them or put other equipment in front ofAir outlet grille. The heated Air outlet grille and Bottom plate may cause injury or damage to
.,,
'i other equipment.Also, do not set the prcjector on the desk which is easily afiected by heat.
Clean the air-tilter once a month, r
"i
(picture
1)
1.
Menu
Button
2.Power
Button
3.Source
Button
4.V+
Button
5.V-
Bufton
6.CH+
Button
7.CH- Button g.Red indicator
10. Remote
sensor
11.Green indicator
Bottom view
How to hang the projector to ceiling?
(picture 2)
Oiintiu
of LED broiector fix the
3 feet of mount to the prolector
3 feet (B D E) hole
The height ofA and
C fee can be adjusted;
Back View
1.PR(Red)
4.Left audio input
(Red)
7.HDMl3 input t0.HDM|'l inpul
't3.DTV
16.VGA
19.
Left audio output
(Red)
Rear
View
(Picture 3)
2.PB(Blue)
5.Right audio inputwhite)
8"
Remote Sensor
'l1.HDMl2 input
'l4.S.video input
,I7,USB
3,Y(Green)
6.AVlN(Yellow)
9. Keystone correction knob
'12. Card reader lnput
'15. Right audio output (White)
18. Power
Switch
(Picture 4)
1.
Exhaust vent 2.Speaker
Remote
Control
(Warning Do not expose the remote control to shocks, liquid or high humidity Do not expose it to direct sunlight or other intense light source when you operate.)
Operstion of LED prujeclot
. or other channel.
INFO: Press this button to show the information.
ENTER:: ok button.
MENU:menu button.
RETURN:Press this button to exit OSD menu.
tr tr tr
E,
,"n, button for left, right, up and down.
E E, press tnis button to adjust volume.
E E,
",
or,,on
DTV mode, press this button to select the following and above channel.
E,
Press this button to paly or pause.
E,
Power button
ON/OF
K, ,r*
ornon
Press this button to mute volume or recover.
P.MODE:Press this button to switch on picture mode.
AUDIO:Press this button to switch on sound mode.
FLIP:
Reversed image.
FREEZE:
Picturefreeze.
FAV:
Press this button to select the favorite channel
CHLIST: channel list button.
ZOOM:Press this button to zoom the picture.
'16:9/4:3,
Press this button to zoom the picture.
0-9:
Press digital button to select channel.
-/-:
Channel selection button.
E,
Press this button to stop
.
SUBTITLE:
Press to turn ONiOFF subtitles,
AUD.TRACI(TTX:audio track button /Turn teletext function.(DTV).
9, ,,rr,
Select the program(movie
or
music) start time(suit for usb/sd)/Display current Channel information(for DTV only).
REPEAT / EPG: Press this button to play video again(suit for usb,sd card)
/ press to display electronic program guide (only available under
DTV mode)r
AB
/ TV
RADIO:
Press this button to paly selected AB(suit for usb/sd)
/
DTV channel and radio channel switch key.
DW:DTV menu key.
OK:Confirm key(for DTV only).
E E E
E:orvupldownitefvrishtkey.
EXIT:Press to exit DTV current menu and return to previous menu.
lil ,r,
Fast backward (for USB/card readerxred button).
E tt,
Fast foruard (for USB/card readerxgreen button).
\-J
PREV:
Previous(yellow Button)
I8
*arr,
Next (blue Button)
tr:RECALL
KEYreturn to previous DTV channel,
SOURCE:Press this button to select specific source such as DTV,
SV
lnsert The Batteries
l.
Remove the battery cover by pressing it and sliding it down.
2.
lnsertthetwol.5V(AAAsize) batteriesmakingsurethepolarity(+or-) ofthe
iiF
Otui^nafl.[nl,Mi,,fu batteries matches
the
polarity marks inside the unit.
3.
Replace
the
battery cover by sliding it in until you hear a click sound.
Precautions when using batteries
t
Do not use old and new batteries together.
O
Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
O
Note that there are chargeable
and
non-chargeable batteries. Do not attempt to charge non-chargeable batteries.
a
Remove
the
batteries from
the
remote control unit if you do not intend
to
use the unit for a long time.
Precautions when using the remote control
unil
a
Do not drop the remote control unit.
a
Do not subject
the
remote control unit
to
physical shocks.
O
Keep the remote control unit dry" Wetting it may cause the unit
to
malfunction.
a
Replace
the
batteries
with
new ones when operation of the unit deteriorates.
Operation area
The range for operation is about
'10 m (33 feet) when the remote control points to the projector. The distance to the screen back to the projector must be less than 5.5 m (18 feet).
lmportant:
Avoid the direct sunlight or fluorescent light to the remote controljsensor. Also keep the distance oi more than 2 m between the remote control sensor and fluorescent lamp on the remote control may not work conectly.
Singal connection diagram
(Picture 5)
op&q$wq{r|.sgilfitlfql
Front projection, ceiling mount
For ceiling mount, you need the ceiling mount kit.Ask a specialist for installation. For more details,consult your dealer.
.
This waranty does not cover damage mused by the use of any unrecommended ceiling mount kit and the installation of the ceiling mount kit at an improper location.
.
When using the ceiling mount, set IMAGE REVERSE in the SET UP menu to
FLIP.
.
Pro.iected images may appear darker when the unit is used as a ceiling installation than when it is used in the tabletop position. This does not signify a product malfunction.
Rear projection
Ask a specialist for installation. For more details,consult your dealer.
.
For rear projection, set
IMAGE REVERSE in the SET UP menu to
FLIP.
Caution:
.
Placing the proJector on a carpet reduces ventilation from the fan at the bottom and might cause problems. Place a hard board or simllar item under the projector to facilitate ventilation of the unit.
.
Place the projector more than
1 m (25 inch) from the wall to prevent blocking the intake, exhaust slots andventilation ofthis projector because hot air comes out of it.
.
Do not use the projector under the following circumstances, which may cause fire or electric shock.
. in a dusty or humid place
. while the projector is lying sideways or upside down
. near a heater
. in a kitchen or oily, smoky or damp place
. in direit sunlight
. with high temperature, such as the closed car
. where the temperature is lower than
+41
T
(+5C
) or higher than
+95T
(+35!
) lmportant:
.
Do not put stress on the lens, as this may cause damage.
Preparing
the
projector
for
operation
Getting
ready
for projection
1.
Connectthe powercord provided tothe projecto(lnputVoltage:100-240VAC;Frequency:50/60H2).
2. Connect the power cord to the wall power outlet.
3, Remove the lens cap.
Warning:
.
Do not look directly into the lens when projector is
'ON".
.
The lens cap is for protecting the lens. lf you leave the power on with the cap on, the cap may be warped.
Please remove the lens cap when you turn ths powsr on.
.
Use the appropriate power cord for your country.
. A three-pin grounding type power plug is used with the projector. Do not remove the grounding pin on the power plug. lf you are unable to insert the plug into the outlet, contact your electrician to replace your A'lC outlet.
.
Do not place any objects on the power cord, and keep the prorector away from heat sources to avoid breaking the power cord. A broken power cord can cause fire or electric shock.
.
Do not revise or alter the power cord otherwise it may causs fire or olgctric shock. Contact your dealer if the cord is broken.
Caution:
fi
.
Plug in firmly and unplug by holding the plug, not by pulling the cable out.
.
Do not plug in or out with wet hands. lt may cause an electric shock.
To
operate
projector
power
ON
1
.Plug in the power cord,the POWER Green indicator lights up,then Green indicator off and Red indicator lights up.
2.
Tum the projector on by pressing the POWER button. The power lamp will be green.
I
To
operate
projector
power
off
.
Press the
POWER button. The message "POWER ? "
.
.
To exit from this mode, press
"RETURN'button on the remote control.
Press the POWER button again.The projector will be turned off.
.
Keystonc conection
When the projector is turned on, the pojected images become brighter gradually. Owning to the different angle of the positions of the projector
,
..
,f ti
I l
I
image keystone distortion may occur. ln case of keystone distortion, the image can be pro.iected regularly by adjusting the keystone correction
,' knob. (115 degree adjusting angel) (Note: When turning the keystone correction knob, please turn it gently, and never use too much effort, or else unwanted damage should occur.)
.
Focusing
The focus length will change with the change ofthe distane between the projector and the screen, so that the image will blur. Now you can tum the lens gently with your hand, to correct the focal length so as to obtain distinct images.
. screen mode
When playing DVD discs containing data of leterboxed image, press the
16:9 button. Exit the Widescreen mode, by pressing the 16:9 button again.
Caution:
.
When you have finished using this equipment, unplug the power cable from the wall outlet, for safety purposes.
Adjusting Projection lmage Size
Refer to the graphic and table below to determine the screen size and projection distance.
Projection
1m 1.5m
2m 2.5m
3.0m
distance
Aspect ratio
16:9 l6:9 l6:9 l5:9 l6:9 lmage size(inch)
25"
47"
63'
82 100"
3.5m
l6:9
'l18"
4m
't6:9
135"
5.5m
't6:9
200"
&raiodlaliebl&8&.itiidlirybt
1. Prcss the "
MENU" button on the remote to open the OSD menu.
2.WhenOSDisdisplayed,use"<"/">"
"4'T"V"keytoselectanyfeatureinthemainmenu.
3.
After selecting the desired main menu item,
press
"ENTER" key to enter sub-menu for feature setting.
4.
Use
"<"/
">"
"1"/ "V'to
select the desired item and adjust the settings with
"{" /'}"and
"ENTER".
5. Press the "MENU" button, the screen will return to the main menu.
6.
To exit OSD, Press the " MENU' button again(or press "RETURN" button). The OSD menu will close and the pro.iector will automatically save the new settings.
Using the top of projector key button:
1. Press the 'MENU" button to open the OSD menu.
2. When OSD is displayed, use
'V+"
/ lr'-"
"CH+"/
"CHJ key to select any feature in the main menu.
3. After selecting the desired main menu item,
press
"SOURCE' key to enter sub-menu for feature setting.
4.
Use
"V+' /
"V-'
"CH+"/
"CHJ to select the desired item and adjust the settings with "V+" /
1/-" or "SOURCE".
5. Press the "
MENU" button, the screen will return to the main menu.
6. To exit OSD, Press the " MENU" button again. The OSD menu will close and the proJector will automatically save the new settings.
Menu
and Operations
1.
Input source(select lnput source)
2.
DTv
3.
Picture
4.
Sound
5.
Option
6.
Usb
7.
Sd
Pressing "SOURCE" key on the remote to Enter input source, you can select
DTv,
AV, S-VIDEO,
YPBPR
,HDM11,HDMl2,HDM13, PC-RGB,
USB and SD CardRead by pressing
'4"/'v"
key(or pressing "SOURCE" key again), enter the input source by pressing "ENTER" key
.
The selected item will change to highlight colour.
(Pressr,g
'SOaIRCE" key on top of the projector bufton to
Enter input source menu, you can select DTV,
AV,
S-VIDEO, YPBPR
,HDM||,
HDMI2, HDM|3, PGRGB, USB a/,d SD CardRead by pressing 'CH+'FoHrbutton(orpress,,ng 'SOURCE key again), enter the input source by pressing ry+" or'vr bdton
.
The selected item will change to highlight colour.) irote;
x
Posilion the proJector in a horizontal position; other positions can cause heat build-up and damage to the projector.
!
Keep a space of 30 cm or more between the sides of the projector.
.!
Do not use the projector in a smoky environment. Smoke residue may buildup on critical parts and damage the projector or its performance.
!
Consult with your dealer for special installation such as suspending{rom a ceiling.
System
function
operation
How
to operate
Using the remoter
10
At,,
t tto.4,tiflrqp. iN erlol
(picture 6)
Method of oPeration:Press Source button on the remote lo show source list,Press"l,
v"
button to choose the mode,then Press
"ENTEN"
button to enter the mode.
Op u iltun
$1
I;E liliijgti&|i ffi
I.DVB-T
lnstallation Guide
Follow the installation guide
to
enjoy your high defmition digital
TV
world. Follow the help
infomation
that at the bottom
ofthe
window to select preference menu language and suitable country (Region) and start chanael search.
Ifno
channel is found during the channel searching process, the user may adjust the antenna position to obtain optimal
TV
signal.Press upward/downward key
to
select item, press leftward/rightward
('A
Y'V
)
("<'/'>)
key to
switch selected items.
In
Channel Search item, press
"OK"
to auto-search channels, press
"EXIT"
to retum main menu.
(l
1)
(Picture 9)
2.1.2 Sort
Program ordering.
You can sort the programs according to your
flavor
Option
By LCN, By ONID
,
By Service Name
,
By Service ID etc.
2.1.3
LCN
LCN: ON/OFF for logical progam list.
2.2
Picture
Set the following items under Picture menu: l)Aspect ratio: Under this item, it is enable to switch between
Auto/I6:9 Wide screen/4:3 FulV4:3
Pan&Scan/4:3 Letter Box.
2)TV Format: Under this item,
it
is enable
to
switch between PALA{TSC system.Once setting finished, press
EXIT
to retum maln menu,
(Picture 7)
2.
DVB-T
Mf,,NU Operation Guide
Press
"DTV"
key to enter
D\IB-T
MENU Operation Guide.
2.1 Program
Four sub-menus (Program Edit, EPG, Sort,
LCN)
are included
in
Program item, press
'OK'key
to
enter, press upward/downward
(" A "/" V ") key to select item, pressleftward/rightward
('{
" /
"
}
") key to switch selected items, press
"EXIT"
to rehrm main menu.
i)
)
(Picture
10)
2.3
Channel Search
Under Channel Serch item, the following
operations
Are available:
l)Auto
Search: Select this item, and press
OK to auto search
TV channels.
2)Manual
Search: Select this item, press OK to manual search
TV channels
3)Country: Setup your country according to your location.
(Picture 8)
2.1.1 Program
Edit
Befbre entering Program Edit item, enter factory password 888888 or 000000.
Before entering Program Edit interface, press red/green/yellow,/blue key on the remote to Move/Skip/Lock/
Delete/FAV all
TV channels. Press EXIT key to exit.
11
(Plcture
11
)
2,3.1 Manual Search
Under Frequency Channel item, press digital number on the rcmote to input channel number directly, press
OK to manual search
TV channels.
t2
WW;iiiifrwyrgp4lo!
2.4
fime
Setup the following items under Time menu: l)Time Offset: Adjust time zone to
Auto or Mmual.
2)Country Region:
Setup your capital
ofthe
Country under this item.
3)Time Zone:
Setup your time zone according to your location.
ODqii&tn nf
LED
&r,le',tar
Can adjust Picture Mbde,Color Temperature,Aspect Ratio,Noise Reduction and PC Setup.As below(picture 9):
Press
'4"/'V"
"<"/">"
to move cursor. Press "ENTER" to enter the sub-menu or adjust item. Press"l\,lENu" to return or exit menu.
1.
PICTUREMoDE(picture
10):
There are 4 picture modes: Standard/N4ild/User/Dynamic.
Standard: middle brightness and contrast; l\4ild: low brightness and contrast;
User: user define the brightness and contrast.
Dynamic: high brightness and contrast;
Note: when user adjust brightness/contrasvhue/saturation/sharpness value, the picture mode will auto change to
User mode.
(picture
12)
2.5
Option
OSD Language, Subtitle Language, Audio Language, are available to seh-rp in Option menu, press upward/
domwrd
key to select the above items, press leftward,/rightward key to switch the selected item. Once
(picture
1
5)
Press
'4"/'V"
"<'/'>"
button to select Picture Mode,and then press "ENTER" button to enter the sub-menu(picture 16).
'
(Picture'l3)
2.6 System
The following operations are available in System interface:
1)Parental Guidance:
Setup
Lock function according to audiences'ages.
2)Set Password: Change factory password
in this
item. Input old password and new one orderly, and then confirm. The defaull password is 888888 or 000000.
Please remember the new password after modifuing.
3)Restore Factory Default:
Press
OK key to restore to actory default setting.
4)Information:
Press
OK key to check system information.
5)Software Update: Upgrade is needed. select this item for relative operation.
(Picture'14)
(picture 16)
Press
"{"/'}" buttonto selectContrast,Brightness,Color,Sharpness and
Tint(suitforAV)
A. Contrast:
Press
"<"
to decrease value, Press
">"
to increase value. Press "l\,lENU" to return menu.
. B.
Brightness:Press
"<"
to decrease value, Press
">"
to increase value. Press "MENU" to return menu.
C. Color:Press
"{"
to decrease value, Press
">"
to increase value.
Press "l\,lENU" to return menu.
D. Sharyness: Press
"<"
to decrease value, Press
")'to increase value. Press "MENU" to return menu.
E.
Tint:Press
"<"
to decrease value, Press
">"
to increase value. Press "MENU" to return menu.
2.
ColorTemperature
There are 4 Color Temperature modes: MediumruVarm/User/Cool.
Enter Picture menu, you can selectColorTomporaturo by pressing
"
'l"v"
key,and then press "ENTER" button to enter the sub-menu(picture
1 l).You can ad,iust the ltem selected by pressing
"{"
/
"}"
key.
Medium: inlcuded red setting,green sottlng end bluo setting;
Warm:
inlcuded red setting,green settlng and blus
B6ttlng;
Cool:
inlcuded red setting,green settlng and blus g€ttlng;
User:
you can set red,green,blue by preeslng
"{"
/
">"
kay.
t3
t4
wwwwi@nte
Enter the sound menu (picture 21), you can adjust
Sound Mode, Balance,Auto Volume,Surround
Sound,SPDlF MODE and
EQ item by pressing
"4"/"V"
key.
(picture
17)
3.
Aspect Ratio
(picture
18)
Enter Picture menu, press
You can adjust
"
'7'V" key to select the item selected by pressing
Aspect Ratio,and then press
"ENTER' button to enter the sub-menu(picture
18).
"
'7"V' key.
Noise Reduction
Enter Picture menu, press
"
'7"V" key to select Noise Reduction,and then press "ENTER' button to enter the sub-menu(picture
l9).
.
(Picture 21)
Sound
Menu
1,
Sound mode;c
an
support Standad/Mu sicthovie/sports/llset.
Standar:suit for W progmm:
Music:suit for listening music:
Movie:suit for media:
User:user define te bass and treble.
Sporfsisu,t for spo/ts program music,movie,personal,spois;
Balance;
Auto Volume;
Surround Sound;
SPDIF MODE;
EQ:
You can select the item selected by pressing
"
'l"V"
key.
(picture't9)
PC Setup
(picture
20)
Enter Picture menu, press
'4"/"v"
key to select
Pc setup
(suit for vcA),and then press "ENTER" button to enter the sub-menu(picture 20).
Press
"A'7"V" key to select,and then press
"<'/
">"
or,,ENTER, key to adjust the item selected.
t5
(Picturo 22)
Enter this menu, you can select OSD Language, Rartore Factory Default,Blending,OsdDuration item by pressing
'
'l"V"
key
,
1.
OSD
Language;
Press
"A'7"V" to select OSD language,and thsn pross'ENTER" koy to enter the sub-menu(picture 23).
Apualipttol&WitbiQttq-t
Select
C:\,
p..r.
"ENTER"
bruoiIIt"Ir:6i;il.
Insert USB Port to USB entry.
2.
Press
"
<"/">"
to select photo, and then "ENTER" button to enter submenu.
3.
SelectC:\,
press
"ENTER"buttontoentersubmenu
4.
Select the specific photo, and press
'TNTER"
button to con{irm
5.
Press
'{X"
button to play, and button to show function menu. Press
"X" button to pause,
"n" button to play the previous one,
"X"button
to play next one;
"1"
button to stop or return to the previous
,enu;
'[" button to repeat all of the programs.
pr".."E"
button to play MP3 music stored at music menu; Ebutton to show playlist;
Sbutton
to show photo detail information;
(picture 23)
You can choose English,Franais,Espaol,Portugues,Arabic and Chinese by pressing
"
"/"V'
key.
2.
Restore Factory Default;
Press"
'7'V"toselectRestoreFactory,,andthenpress"ENTER"keytoenterthesub-menu,Themessage"Areyousure?" key to restore or press
">"
key to return OPTION menu.
3.
Blending;
Press
"l'"/'v"
to select Blending,and then press "ENTER" key to choose
LOW,MIDDLE,HIcH or OFF mode.
4.
OsdDuration;
Press
"1"/"V"
to selectOsdDuration,and then press "ENTER" keyto choose
5
Sec, I0 Sec,
15 Sec or OFF mode.
Press"<"
USB/Card reader function
This Prcjector integrates powerful function to support USB/SD Card reader and you can connect Ex-equipmentsvia the USB/SD Card reader.
At present, system can support usual USB/card reader media players and upgrade to system software.
It can support only the files displaying in the list and the file formate this product plays. Enter USB by Pressing "SOURCE" key on the remote to select input source "USB" or "SD " (for card reader),and then pressing "ENTER" key to enter.
(picture 26)
6, press')"button to show the second function
,"nu;
pr".rg,o,
E button to rotate the photo counter-clockwise or rotate clockwise.
Press
Eor
E button to
,oom out or zoom in the photo;
E button to move view.
7.
Press "RETURN" button to exit,
Music Show
l.
Insert USB Pon lo USB entry.
2
.
Press
"
<
"/'>
" to select music program, and then
"ENTER"
button to enter submenu.
3.
SelectCl,
press "ENTER" buttontoenter submenu.
(picture 24)
You can choose Photo, Music, lvlovie, Text in the menu(picture 24).
Photo Show
(picture 25)
t7
(picture 27)
4.
Select the specific song, press
5. Press
"I" button to play; press "ENTER" button to
confim.
"I" button to play the previous
one,
press
"X"button
to play next one; press
"I" button to stop or return to the previous menu.
pressElbufton to show playlist; press fl button to show music program detail information;
6.
Press
E button to set the play period of time
7.
Press "RETURN" button to exit.
Movie Show
1.
Insert USB Port to USB entry.
2.Press "<"r'>"toselectmovieprogram,andthen"ENTER"buttontoentersubmenu.
3.
Select
Cl,
press "ENTER" button to enter submenu(picture 28).
4.
Select the specific movie, press
'il" button to play; pross
"ENTER"
button to confirm.
t8
€na4&w&eu&i&i
presGlbutton to show playlist; press
I
brno,
,o
,ho*
movie program detail information;
6. Press
E button to set the play period
oftime.
(picture 28)
7.
Press "RETURN" button to exit.
TEXT Show
1. Insert USB Port to USB entry.
2.Press "<"/'>"toselecttextprogram,andthen"ENTER"buttontoentersubmenu.
3. Select
Cl, press "ENTER" button to enter submenu.
4.
Select the specific text. press
[" butron to play.
5.Press">"buttontoplaythenextone,
press"{"buttontoplaypreviousone;press"A'"buttontoplaythepageup,press"V"buttontoplay the pagedown
.
6.Press "RETURN" button to exit.
The file format of UsB,lcard reader can Supporl:
USB
Function
Media file Extension
PICTURE
MOVIE
IUUSIC
JPEG. BMP.
PNG jpg\
.bmp\ .png
MPEGl, MPEG2. MPEG4. H264,
RIVl.
RMVB.
MOV. MJPEG. VC1, DIVX.
FLV
.avi\.mpg\.dat\.vob\.div\.mov\,mkv\.rm\.mvb\.mp4\.mj
peg\.ts\.trp\.wmv\.asfl
.fl v
WMA. MP3, M4A (AAC) wma\.mp3\.m4a
Photo parameter
File type \ the relevant parameters
Resolutioh
JPEG
BIUP
15360X8640
9600x6400
Compression option
Prcgressive JPEG
Baseline("standard")
Baseline optimized homochrcmafism
1
6 color
256 @lor
16 bit
Support boundaries
Resolution Only support
1024.768
supporl suppon suppon
Movie
Media
MPEGl
MPEG2
MPEG4
RI\/l\RMVB
H264
MJPEG
Divx vc1
FLV
File Ext.
.DAN.MPG\.MPEG
,MPG
,AVI\.MP4
,RM\.RMVB
MK\A,MOV
..Dtuo.Avt
,WM\A.ASF
FLV
Codec
DIVX.XVID
RV8,RVg,RV1O
H.264
MPEG,DIVX,H264
vcl
H264
Resolution
1920x1080@30p
1920x1080@30p
1920x1080@30p
1280x720@30p
1920x1080@30p
640x480@30p
1920x1080@30p
1920x1080@30p
1920x1080@30p
Remark
Max Data Rate:2oMbps
Max Data Raie:2oMbps l\,lax Data Rate:2oMbps
Max Data Rate:1oMbps
Max Data Rate:2oMbps
Max Data
Rale:1 oMbps
Max Oata Rale:2oMbps
Max Oata Rate:2oMbps
Max Data Rate:2oMbps
1. Userts maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt or spots will project on the screen and diminish image quality. lf any other parts need replacing, contact your dealer or qualified service personnel.
Cleaning the Lens
Use
a
standard lens-cleaning brush or
a
piece of lens tissue dampened with lens cleaning fluid. The lens surface is fragile. Use only recommended, nonabrasive lenscleaning materials. Do not touch the lens with your tingers.
Cleaning the Projector Housing
Gently wipe with a soft cloth- lf dirt and stains ars not easily removed, use a soft cloth damped with water, or water and neutral detergent, and wipe dry wilh a soft, dry cloth.
Warning
Never ogen any of the covers on the prolector. Dangorou8 oloctrlcal voltagss inside the projector can cause severe injury Do not attempt to seruice this product youBelf.
Refor all sorvlclng to quelltled sorvlco porsonnel.
!
Turn off the projector and romovo the AC powor cord from tho power outlet bsforo beginnlng meintonance work.
I
Make sure the lens is cool before cleanlng,
I Do not use detergents or chemlcals other lhen
lho$
not6d above. Do not u8€ benzene or thlnners.
Ll Do not use chemical sprays.
&&i&&ii&&&a{it&d&&
D Use a soff cloth or lens paper only.
Simple repair
and
solution
The New small LED p/o/iector is a high-tech product integrating optical, mechanical, and electronic components, with CPU and several protection circuits installed. ln case of violating the operation procedure or improper setting, the protection chcuit of it will start to work.
Then some abnormal symptoms will occur to it. However, as long as you make the correct setting or follow the operation procedure, the failures may be resolved-
PROBLEMS
The power is off
CAUSE
.
Ihe air jnlet grille, outlet grille or airfilter is clogged with dust or some objects.
POWER indicator doss not light up.
.
Pow€r @rd is unplugged lrom the outlet.
.
PMr
cord is dis@nnected from the projeclor.
POSSIBLE SOLUTIONS
.
Remove the object.
.Plug thspower cord inlo the outlet.
. lnsrt the powBr cord into the pojector.
POlt/ER indicator blink3 red.
. The prcjector has been turned on again too soon afrer having been tumed off.
.
Lamp is no longer working.
. Wait for the lighting sequene.
. Replae the lamp wilh a new one.
No picture appeaE on the sqeen.
The image is turned off.
The image is distorted fhe image is dark
The image is blurred.
Lens is @vered by lens
€p.
The equipmenl
@nnec.ted to {his prcjector is not turned on.
Hmkup is not made @rectly wjlh other €quipment.
The input source is not slected mrectly.
. Take the lens
€p
off.
. Turn on the connecled equipment.
.
Conlim the hookup.
. Select the coreci source amrding to the
.
The air inlel grille, outlet grille or air filter is clogged wtth dust or some objects equipment @nnected to this prcjector.
.
Remove the object and tum offthe main porer switch. Afrer about
1
0 minutes, Turn lhe prcjectorcn.
. The prcjector is not at a right angle to the screen.
.
Adjusl the angle of th€ prcjector to make a
.
Brightness, tint and @lor are not adjusted correclly.
The prcjec{ing distance is beyond the focused area.
Lens is dirly.
Screen size exeeds screen size specm@tions.
Brightne$ and
@ntEst are not adjusted @rectly.
The projector is not at a righl angle to the screen right angle to the sreen.
. Adjust brightness. tint and @lor
@rectly,
. Adjust the projecting distance.
.
Clean lens.
.
Redu@ scrsn size to within
35'lo
150'.
. Adjusl brightness, contmst.
. Adjusi the angle of the prcjector to make a right angle to lhe
$reen
. When you see the stationary image for a long time, it may remain on the screen if you change the image. lt is not a breakdown. The bluned image will disappear in a few minutes.
It is nomal.
The image remains blured.
R6d, blue or green dots are vi€wed on th€ texl ol image.
The image is distorted onlhe screen and noise is heard.
No sound is heard.
. The
€ble for @nnectjon with other equipment is not plugged securBly into teminal.
. The prcjector is installed t@ close to olher equipment.
. Volume is not tumed up.
.
Connection to other equipment is not made @rectly.
the
. The eble for connection wilh other equipmenl is not plugged secursly into the teminal.
.
The pDj6ctor is installed too close to othBr
6quipment,
. Turn up the volume,
. Check @nnections.
O p q a6m if. LE
iid
l<,rot
Remote
control does nol work
. This mark is displayed when an invalid operation is executed (for examplo, when the COIIPUTER or
VIDEO button is pressed whil€ the menu is displayed). This is not failure.
The batteries in the remote conlrol used up the battery is installed not correctly obstacle between the prcjector singal recoiver ?
ls the remote control out of operating distance?
.
Change new batteries
. lnslall the battery correctly
.
Remove the object
.
Close the remote control to prcjector
(max distance: 7M)
Specifications
Technical specilications
Model No.
IV
System
Display Technology
Brightness
Contmst ratio
Lamp power
Focus adjustments
Picture Rotation function
Compatibility
Aspect
Etio
Builtin
Speaker
OSD Languages lnput Socket
PAL
5.8 inch LCD
Physical resolution:native 1280*768, support 1280-800,1280X1024 and 1366x768
3000ansi(max)
2000:'l
120W led bulb
Manual Focusing,SupportVertical Zoomllmage Zoom/lmage Shrink.
Horizontall/ertiml rotation
HDIIl:
Support
1
080P1
1080i1720P 1576P 1480Pi576i/480i
4r3l16:9 (supportAll input 16:9)
2W
-2
Audio output (8O)
Englishi
Franais/Espaol/Portugues/Arabic.ichinese
(Gn add languages)
AVDryS-video,Audio-out,Audio-in,VGA,YPbPr,HDlvll*3,USB,SD card reader
Advancd Feature
Lamp life
Dimensions(LxWxH)
Weight
Voltage
Noise
Prcjection distance
Prcjection size
30 de-interlace,Zoom,'16:9,video supporl H.264 lor USB/SD input,
HD digital Tv(dvb{),MPEG4
50000 hours
L:330 x W:245 x
H: 115
N,W:3.65 KG; GW;4.5KG
AC100-240V
50/60H2;
30dB
1.0-6.0m
25-250 inch
Supplied Accessories:Remote control, power plug cablo, user manual,warranty card, AV signal cabl€,lens clean cloth,fuse.
Thank you for reading the
User Manual. lf you have any question, please leel free to rcntact us or the dealers. We will provide excellent seryi@ to you. We sincerely hope that you will enjoy your life with our producb.
22

Public link updated
The public link to your chat has been updated.
Advertisement